Blackfin arch: add new processor ADSP-BF52x arch/mach support

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

1 files changed, 737 insertions, 0 deletions

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
new file mode 100644
index 000000000000..09fb624af5ac
--- /dev/null
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -0,0 +1,737 @@
+/*
+ * File:         arch/blackfin/mach-bf527/boards/ezkit.c
+ * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb_isp1362.h>
+#endif
+#include <linux/pata_platform.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb_sl811.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "ADDS-BF527-EZKIT";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#define ISP1761_BASE       0x203C0000
+#define ISP1761_IRQ        IRQ_PF7
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+        [0] = {
+                .name   = "isp1761-regs",
+                .start  = ISP1761_BASE + 0x00000000,
+                .end    = ISP1761_BASE + 0x000fffff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = ISP1761_IRQ,
+                .end    = ISP1761_IRQ,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_isp1761_device = {
+        .name           = "isp1761",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
+        .resource       = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+        &bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+        unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+        printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+        set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
+
+        return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+        platform_device_unregister(&bfin_isp1761_device);
+}
+
+arch_initcall(bfin_isp1761_init);
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+        {
+                .start = 0x20310000, /* IO PORT */
+                .end = 0x20312000,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 0x20311000, /* Attribute Memory */
+                .end = 0x20311FFF,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = IRQ_PF4,
+                .end = IRQ_PF4,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+        }, {
+                .start = 6, /* Card Detect PF6 */
+                .end = 6,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+        .name = "bfin_cf_pcmcia",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+        .resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+        .name = "rtc-bfin",
+        .id   = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+        {
+                .name = "smc91x-regs",
+                .start = 0x20300300,
+                .end = 0x20300300 + 16,
+                .flags = IORESOURCE_MEM,
+        }, {
+
+                .start = IRQ_PF7,
+                .end = IRQ_PF7,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+static struct platform_device smc91x_device = {
+        .name = "smc91x",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(smc91x_resources),
+        .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+        [0] = {
+                .start  = 0x203FB800,
+                .end    = 0x203FB800 + 8,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_PF9,
+                .end    = IRQ_PF9,
+                .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+        },
+};
+
+static struct platform_device dm9000_device = {
+        .name           = "dm9000",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(dm9000_resources),
+        .resource       = dm9000_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+static struct resource sl811_hcd_resources[] = {
+        {
+                .start = 0x20340000,
+                .end = 0x20340000,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 0x20340004,
+                .end = 0x20340004,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = CONFIG_USB_SL811_BFIN_IRQ,
+                .end = CONFIG_USB_SL811_BFIN_IRQ,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+        gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
+
+        if (is_on)
+                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
+        else
+                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+        .potpg = 10,
+        .power = 250,       /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+        .port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+        .name = "sl811-hcd",
+        .id = 0,
+        .dev = {
+                .platform_data = &sl811_priv,
+        },
+        .num_resources = ARRAY_SIZE(sl811_hcd_resources),
+        .resource = sl811_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+        {
+                .start = 0x20360000,
+                .end = 0x20360000,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 0x20360004,
+                .end = 0x20360004,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+                .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+        .sel15Kres = 1,
+        .clknotstop = 0,
+        .oc_enable = 0,
+        .int_act_high = 0,
+        .int_edge_triggered = 0,
+        .remote_wakeup_connected = 0,
+        .no_power_switching = 1,
+        .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+        .name = "isp1362-hcd",
+        .id = 0,
+        .dev = {
+                .platform_data = &isp1362_priv,
+        },
+        .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+        .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+        .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+        {
+                .start = 0x20300000,
+                .end = 0x20300000 + 0x100,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = IRQ_PF7,
+                .end = IRQ_PF7,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+static struct platform_device net2272_bfin_device = {
+        .name = "net2272",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+        .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) \
+        || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+        {
+                .name = "bootloader",
+                .size = 0x00020000,
+                .offset = 0,
+                .mask_flags = MTD_CAP_ROM
+        }, {
+                .name = "kernel",
+                .size = 0xe0000,
+                .offset = 0x20000
+        }, {
+                .name = "file system",
+                .size = 0x700000,
+                .offset = 0x00100000,
+        }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+        .name = "m25p80",
+        .parts = bfin_spi_flash_partitions,
+        .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+        .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+        .enable_dma = 0,         /* use dma transfer with this chip*/
+        .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+        || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+        .enable_dma = 1,         /* use dma transfer with this chip*/
+        .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+        || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+        .enable_dma = 1,
+        .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+        .ctl_reg        = 0x4, /* send zero */
+        .enable_dma     = 0,
+        .bits_per_word  = 8,
+        .cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+static struct bfin5xx_spi_chip ad5304_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+        .model                  = 7877,
+        .vref_delay_usecs       = 50,   /* internal, no capacitor */
+        .x_plate_ohms           = 419,
+        .y_plate_ohms           = 486,
+        .pressure_max           = 1000,
+        .pressure_min           = 0,
+        .stopacq_polarity       = 1,
+        .first_conversion_delay = 3,
+        .acquisition_time       = 1,
+        .averaging              = 1,
+        .pen_down_acc_interval  = 1,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+        || defined(CONFIG_MTD_M25P80_MODULE)
+        {
+                /* the modalias must be the same as spi device driver name */
+                .modalias = "m25p80", /* Name of spi_driver for this device */
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0, /* Framework bus number */
+                .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+                .platform_data = &bfin_spi_flash_data,
+                .controller_data = &spi_flash_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+        || defined(CONFIG_SPI_ADC_BF533_MODULE)
+        {
+                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0, /* Framework bus number */
+                .chip_select = 1, /* Framework chip select. */
+                .platform_data = NULL, /* No spi_driver specific config */
+                .controller_data = &spi_adc_chip_info,
+        },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+        || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+        {
+                .modalias = "ad1836-spi",
+                .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+                .controller_data = &ad1836_spi_chip_info,
+        },
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+        {
+                .modalias = "ad9960-spi",
+                .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 1,
+                .controller_data = &ad9960_spi_chip_info,
+        },
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+        {
+                .modalias = "spi_mmc_dummy",
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 0,
+                .platform_data = NULL,
+                .controller_data = &spi_mmc_chip_info,
+                .mode = SPI_MODE_3,
+        },
+        {
+                .modalias = "spi_mmc",
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+                .platform_data = NULL,
+                .controller_data = &spi_mmc_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+#if defined(CONFIG_PBX)
+        {
+                .modalias = "fxs-spi",
+                .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 8 - CONFIG_J11_JUMPER,
+                .controller_data = &spi_si3xxx_chip_info,
+                .mode = SPI_MODE_3,
+        },
+        {
+                .modalias = "fxo-spi",
+                .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 8 - CONFIG_J19_JUMPER,
+                .controller_data = &spi_si3xxx_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+        {
+                .modalias = "ad5304_spi",
+                .max_speed_hz = 1250000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 2,
+                .platform_data = NULL,
+                .controller_data = &ad5304_chip_info,
+                .mode = SPI_MODE_2,
+        },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+        {
+                .modalias               = "ad7877",
+                .platform_data          = &bfin_ad7877_ts_info,
+                .irq                    = IRQ_PF6,
+                .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num        = 1,
+                .chip_select  = 1,
+                .controller_data = &spi_ad7877_chip_info,
+        },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+        .num_chipselect = 8,
+        .enable_dma = 1,  /* master has the ability to do dma transfer */
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+        [0] = {
+                .start = SPI0_REGBASE,
+                .end   = SPI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+                },
+        [1] = {
+                .start = CH_SPI,
+                .end   = CH_SPI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_spi0_device = {
+        .name = "bfin-spi",
+        .id = 0, /* Bus number */
+        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+        .resource = bfin_spi0_resource,
+        .dev = {
+                .platform_data = &bfin_spi0_info, /* Passed to driver */
+        },
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+static struct platform_device bfin_fb_device = {
+        .name = "bf537-lq035",
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+        .name = "bfin-adv7393",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+        {
+                .start = 0xFFC00400,
+                .end = 0xFFC004FF,
+                .flags = IORESOURCE_MEM,
+        },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+        {
+                .start = 0xFFC02000,
+                .end = 0xFFC020FF,
+                .flags = IORESOURCE_MEM,
+        },
+#endif
+};
+
+static struct platform_device bfin_uart_device = {
+        .name = "bfin-uart",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(bfin_uart_resources),
+        .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+        [0] = {
+                .start = TWI0_REGBASE,
+                .end   = TWI0_REGBASE,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_TWI,
+                .end   = IRQ_TWI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+        .name = "i2c-bfin-twi",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+        .resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+        .name = "bfin-sport-uart",
+        .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+        .name = "bfin-sport-uart",
+        .id = 1,
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT        55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+        .ioport_shift = 1,
+        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+        {
+                .start = 0x20314020,
+                .end = 0x2031403F,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = 0x2031401C,
+                .end = 0x2031401F,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = PATA_INT,
+                .end = PATA_INT,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_pata_device = {
+        .name = "pata_platform",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(bfin_pata_resources),
+        .resource = bfin_pata_resources,
+        .dev = {
+                .platform_data = &bfin_pata_platform_data,
+        }
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+        &bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+        &rtc_device,
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+        &sl811_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+        &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+        &smc91x_device,
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+        &dm9000_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+        &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+        &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+        &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+        &bfin_fb_device,
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+        &bfin_fb_adv7393_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+        &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+        &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+        &bfin_sport0_uart_device,
+        &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+        &bfin_pata_device,
+#endif
+};
+
+static int __init stamp_init(void)
+{
+        printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+        spi_register_board_info(bfin_spi_board_info,
+                                ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+        return 0;
+}
+
+arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+        /* workaround reboot hang when booting from SPI */
+        if ((bfin_read_SYSCR() & 0x7) == 0x3)
+                bfin_gpio_reset_spi0_ssel1();
+}