Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (57 commits)
  [MTD] [NAND] subpage read feature as a way to increase performance. 
  CPUFREQ: S3C24XX NAND driver frequency scaling support.
  [MTD][NAND] au1550nd: remove unused variable
  [MTD] jedec_probe: Fix SST 16-bit chip detection
  [MTD][MTDPART] Fix a division by zero bug
  [MTD][MTDPART] Cleanup and document the erase region handling
  [MTD][MTDPART] Handle most checkpatch findings
  [MTD][MTDPART] Seperate main loop from per-partition code in add_mtd_partition
  [MTD] physmap: resume already suspended chips on failure to suspend
  [MTD] physmap: Fix suspend/resume/shutdown bugs.
  [MTD] [NOR] Fix -ETIMEO errors in CFI driver
  [MTD] [NAND] fsl_elbc_nand: fix section mismatch with CONFIG_MTD_OF_PARTS=y
  [JFFS2] Use .unlocked_ioctl
  [MTD] Fix const assignment in the MTD command line partitioning driver
  [MTD] [NOR] gen_probe: No debug message when debugging is disabled
  [MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip drivers
  [MTD] [MAPS] Remove the bast-flash driver.
  [MTD] [NAND] fsl_elbc_nand: ecclayout cleanups
  [MTD] [NAND] fsl_elbc_nand: implement support for flash-based BBT
  [MTD] [NAND] fsl_elbc_nand: fix OOB workability for large page NAND chips
  ...

5 files changed, 134 insertions, 3 deletions

diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
index af90b00100fd..8dc48214f0b7 100644
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
         bool "ATSTK1004"
         select CPU_AT32AP7002
 
+config BOARD_ATSTK1006
+        bool "ATSTK1006"
+        select CPU_AT32AP7000
+
 endchoice
 
 
diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
index beead86462e8..edecee03742d 100644
--- a/arch/avr32/boards/atstk1000/Makefile
+++ b/arch/avr32/boards/atstk1000/Makefile
@@ -2,3 +2,4 @@ obj-y				+= setup.o flash.o
 obj-$(CONFIG_BOARD_ATSTK1002)   += atstk1002.o
 obj-$(CONFIG_BOARD_ATSTK1003)   += atstk1003.o
 obj-$(CONFIG_BOARD_ATSTK1004)   += atstk1004.o
+obj-$(CONFIG_BOARD_ATSTK1006)   += atstk1002.o
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index e11659b732fa..14dc5a143695 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -1,7 +1,7 @@
 /*
- * ATSTK1002 daughterboard-specific init code
+ * ATSTK1002/ATSTK1006 daughterboard-specific init code
  *
- * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) 2005-2007 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -35,6 +35,74 @@ unsigned long at32_board_osc_rates[3] = {
         [2] = 12000000, /* 12 MHz on osc1 */
 };
 
+/*
+ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
+ * have the AT32AP7000 chip on board; the difference is that the
+ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
+ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
+ * none.)
+ *
+ * The RAM difference is handled by the boot loader, so the only
+ * difference we end up handling here is the NAND flash.
+ */
+#ifdef CONFIG_BOARD_ATSTK1006
+#include <linux/mtd/partitions.h>
+#include <asm/arch/smc.h>
+
+static struct smc_timing nand_timing __initdata = {
+        .ncs_read_setup         = 0,
+        .nrd_setup              = 10,
+        .ncs_write_setup        = 0,
+        .nwe_setup              = 10,
+
+        .ncs_read_pulse         = 30,
+        .nrd_pulse              = 15,
+        .ncs_write_pulse        = 30,
+        .nwe_pulse              = 15,
+
+        .read_cycle             = 30,
+        .write_cycle            = 30,
+
+        .ncs_read_recover       = 0,
+        .nrd_recover            = 15,
+        .ncs_write_recover      = 0,
+        /* WE# high -> RE# low min 60 ns */
+        .nwe_recover            = 50,
+};
+
+static struct smc_config nand_config __initdata = {
+        .bus_width              = 1,
+        .nrd_controlled         = 1,
+        .nwe_controlled         = 1,
+        .nwait_mode             = 0,
+        .byte_write             = 0,
+        .tdf_cycles             = 2,
+        .tdf_mode               = 0,
+};
+
+static struct mtd_partition nand_partitions[] = {
+        {
+                .name           = "main",
+                .offset         = 0x00000000,
+                .size           = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
+{
+        *num_partitions = ARRAY_SIZE(nand_partitions);
+        return nand_partitions;
+}
+
+struct atmel_nand_data atstk1006_nand_data __initdata = {
+        .cle            = 21,
+        .ale            = 22,
+        .rdy_pin        = GPIO_PIN_PB(30),
+        .enable_pin     = GPIO_PIN_PB(29),
+        .partition_info = nand_part_info,
+};
+#endif
+
 struct eth_addr {
         u8 addr[6];
 };
@@ -218,6 +286,12 @@ static int __init atstk1002_init(void)
 
         at32_add_system_devices();
 
+#ifdef CONFIG_BOARD_ATSTK1006
+        smc_set_timing(&nand_config, &nand_timing);
+        smc_set_configuration(3, &nand_config);
+        at32_add_device_nand(0, &atstk1006_nand_data);
+#endif
+
 #ifdef  CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
         at32_add_device_usart(1);
 #else
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 604f44f5dd16..351e1b42f937 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1871,6 +1871,58 @@ fail:
 #endif
 
 /* --------------------------------------------------------------------
+ * NAND Flash / SmartMedia
+ * -------------------------------------------------------------------- */
+static struct resource smc_cs3_resource[] __initdata = {
+        {
+                .start  = 0x0c000000,
+                .end    = 0x0fffffff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = 0xfff03c00,
+                .end    = 0xfff03fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device *__init
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
+{
+        struct platform_device *pdev;
+
+        if (id != 0 || !data)
+                return NULL;
+
+        pdev = platform_device_alloc("atmel_nand", id);
+        if (!pdev)
+                goto fail;
+
+        if (platform_device_add_resources(pdev, smc_cs3_resource,
+                                ARRAY_SIZE(smc_cs3_resource)))
+                goto fail;
+
+        if (platform_device_add_data(pdev, data,
+                                sizeof(struct atmel_nand_data)))
+                goto fail;
+
+        set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
+        if (data->enable_pin)
+                at32_select_gpio(data->enable_pin,
+                                AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+        if (data->rdy_pin)
+                at32_select_gpio(data->rdy_pin, 0);
+        if (data->det_pin)
+                at32_select_gpio(data->det_pin, 0);
+
+        platform_device_add(pdev);
+        return pdev;
+
+fail:
+        platform_device_put(pdev);
+        return NULL;
+}
+
+/* --------------------------------------------------------------------
  * AC97C
  * -------------------------------------------------------------------- */
 static struct resource atmel_ac97c0_resource[] __initdata = {
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index fa427ed42787..b2d9bc61a35c 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -278,4 +278,4 @@ static int __init hsmc_init(void)
 {
         return platform_driver_register(&hsmc_driver);
 }
-arch_initcall(hsmc_init);
+core_initcall(hsmc_init);