ARM: at91: add Somfy Animeo IP board support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

2 files changed, 167 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4a4337b19476..52c6b46098b9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -4,6 +4,7 @@ ifeq ($(CONFIG_OF),y)
 # rm9200
 dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
 # sam9260
+dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
 dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
 dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
 dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
new file mode 100644
index 000000000000..518baedaae05
--- /dev/null
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -0,0 +1,166 @@
+/*
+ * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+
+/ {
+        model = "Somfy Animeo IP";
+        compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
+
+        aliases {
+                serial0 = &usart1;
+                serial1 = &usart2;
+                serial2 = &usart0;
+                serial3 = &dbgu;
+                serial4 = &usart3;
+                serial5 = &uart0;
+                serial6 = &uart1;
+        };
+
+        chosen {
+                linux,stdout-path = &usart2;
+        };
+
+        memory {
+                reg = <0x20000000 0x4000000>;
+        };
+
+        clocks {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+
+                main_clock: clock@0 {
+                        compatible = "atmel,osc", "fixed-clock";
+                        clock-frequency = <18432000>;
+                };
+        };
+
+        ahb {
+                apb {
+                        usart0: serial@fffb0000 {
+                                pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
+                                linux,rs485-enabled-at-boot-time;
+                                status = "okay";
+                        };
+
+                        usart1: serial@fffb4000 {
+                                pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
+                                linux,rs485-enabled-at-boot-time;
+                                status = "okay";
+                        };
+
+                        usart2: serial@fffb8000 {
+                                pinctrl-0 = <&pinctrl_usart2>;
+                                status = "okay";
+                        };
+
+                        macb0: ethernet@fffc4000 {
+                                pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
+                                phy-mode = "mii";
+                                status = "okay";
+                        };
+                };
+
+                nand0: nand@40000000 {
+                        nand-bus-width = <8>;
+                        nand-ecc-mode = "soft";
+                        nand-on-flash-bbt;
+                        status = "okay";
+
+                        at91bootstrap@0 {
+                                label = "at91bootstrap";
+                                reg = <0x0 0x8000>;
+                        };
+
+                        barebox@8000 {
+                                label = "barebox";
+                                reg = <0x8000 0x40000>;
+                        };
+
+                        bareboxenv@48000 {
+                                label = "bareboxenv";
+                                reg = <0x48000 0x8000>;
+                        };
+
+                        user_block@0x50000 {
+                                label = "user_block";
+                                reg = <0x50000 0xb0000>;
+                        };
+
+                        kernel@100000 {
+                                label = "kernel";
+                                reg = <0x100000 0x1b0000>;
+                        };
+
+                        root@2b0000 {
+                                label = "root";
+                                reg = <0x2b0000 0x1D50000>;
+                        };
+                };
+
+                usb0: ohci@00500000 {
+                        num-ports = <2>;
+                        atmel,vbus-gpio = <&pioB 15 1>;
+                        status = "okay";
+                };
+        };
+
+        leds {
+                compatible = "gpio-leds";
+
+                power_green {
+                        label = "power_green";
+                        gpios = <&pioC 17 0>;
+                        linux,default-trigger = "heartbeat";
+                };
+
+                power_red {
+                        label = "power_red";
+                        gpios = <&pioA 2 0>;
+                };
+
+                tx_green {
+                        label = "tx_green";
+                        gpios = <&pioC 19 0>;
+                };
+
+                tx_red {
+                        label = "tx_red";
+                        gpios = <&pioC 18 0>;
+                };
+        };
+
+        gpio_keys {
+                compatible = "gpio-keys";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                keyswitch_in {
+                        label = "keyswitch_in";
+                        gpios = <&pioB 1 0>;
+                        linux,code = <28>;
+                        gpio-key,wakeup;
+                };
+
+                error_in {
+                        label = "error_in";
+                        gpios = <&pioB 2 0>;
+                        linux,code = <29>;
+                        gpio-key,wakeup;
+                };
+
+                btn {
+                        label = "btn";
+                        gpios = <&pioC 23 0>;
+                        linux,code = <31>;
+                        gpio-key,wakeup;
+                };
+        };
+};