Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  arm: omap4: panda: remove usb_nop_xceiv_register(v1)
  OMAP1: Fix non-working LCD on OMAP310
  OMAP3: Devkit8000: Change lcd power pin
  omap1: remove duplicated #include
  arm: mach-omap2: mux: free allocated memory on error exit
  arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints
  OMAP: PM: SmartReflex: Fix possible null pointer read access
  OMAP: PM: SmartReflex: Fix possible memory leak
  arm: mach-omap2: voltage: debugfs: fix memory leak
  OMAP3: PM: fix save secure RAM to restore MPU power state
  OMAP: PM: SmartReflex: Add missing IS_ERR test

9 files changed, 39 insertions, 38 deletions

diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index c9088d85da04..453809359ba6 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -37,7 +37,7 @@ int omap_lcd_dma_running(void)
          * On OMAP1510, internal LCD controller will start the transfer
          * when it gets enabled, so assume DMA running if LCD enabled.
          */
-        if (cpu_is_omap1510())
+        if (cpu_is_omap15xx())
                 if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
                         return 1;
 
@@ -95,7 +95,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
 
 void omap_set_lcd_dma_b1_rotation(int rotate)
 {
-        if (cpu_is_omap1510()) {
+        if (cpu_is_omap15xx()) {
                 printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
                 BUG();
                 return;
@@ -106,7 +106,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
 
 void omap_set_lcd_dma_b1_mirror(int mirror)
 {
-        if (cpu_is_omap1510()) {
+        if (cpu_is_omap15xx()) {
                 printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
                 BUG();
         }
@@ -116,7 +116,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 
 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 {
-        if (cpu_is_omap1510()) {
+        if (cpu_is_omap15xx()) {
                 printk(KERN_ERR "DMA virtual resulotion is not supported "
                                 "in 1510 mode\n");
                 BUG();
@@ -127,7 +127,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
 
 void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
 {
-        if (cpu_is_omap1510()) {
+        if (cpu_is_omap15xx()) {
                 printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
                 BUG();
         }
@@ -177,7 +177,7 @@ static void set_b1_regs(void)
                         bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
                         /* 1510 DMA requires the bottom address to be 2 more
                          * than the actual last memory access location. */
-                        if (cpu_is_omap1510() &&
+                        if (cpu_is_omap15xx() &&
                                 lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
                                         bottom += 2;
                         ei = PIXSTEP(0, 0, 1, 0);
@@ -241,7 +241,7 @@ static void set_b1_regs(void)
                 return; /* Suppress warning about uninitialized vars */
         }
 
-        if (cpu_is_omap1510()) {
+        if (cpu_is_omap15xx()) {
                 omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
                 omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
                 omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
@@ -343,7 +343,7 @@ void omap_free_lcd_dma(void)
                 BUG();
                 return;
         }
-        if (!cpu_is_omap1510())
+        if (!cpu_is_omap15xx())
                 omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
                             OMAP1610_DMA_LCD_CCR);
         lcd_dma.reserved = 0;
@@ -360,7 +360,7 @@ void omap_enable_lcd_dma(void)
          * connected. Otherwise the OMAP internal controller will
          * start the transfer when it gets enabled.
          */
-        if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+        if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
                 return;
 
         w = omap_readw(OMAP1610_DMA_LCD_CTRL);
@@ -378,14 +378,14 @@ EXPORT_SYMBOL(omap_enable_lcd_dma);
 void omap_setup_lcd_dma(void)
 {
         BUG_ON(lcd_dma.active);
-        if (!cpu_is_omap1510()) {
+        if (!cpu_is_omap15xx()) {
                 /* Set some reasonable defaults */
                 omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
                 omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
                 omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
         }
         set_b1_regs();
-        if (!cpu_is_omap1510()) {
+        if (!cpu_is_omap15xx()) {
                 u16 w;
 
                 w = omap_readw(OMAP1610_DMA_LCD_CCR);
@@ -407,7 +407,7 @@ void omap_stop_lcd_dma(void)
         u16 w;
 
         lcd_dma.active = 0;
-        if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+        if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
                 return;
 
         w = omap_readw(OMAP1610_DMA_LCD_CCR);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index f83fc335c613..6885d2fac183 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -44,7 +44,6 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
-#include <linux/sched.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index e906e05bb41b..9a2a31e011ce 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = {
 
 static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
-        twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
-        twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
-
         if (gpio_is_valid(dssdev->reset_gpio))
                 gpio_set_value_cansleep(dssdev->reset_gpio, 1);
         return 0;
@@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[];
 static int devkit8000_twl_gpio_setup(struct device *dev,
                 unsigned gpio, unsigned ngpio)
 {
+        int ret;
+
         omap_mux_init_gpio(29, OMAP_PIN_INPUT);
         /* gpio + 0 is "mmc0_cd" (input/IRQ) */
         mmc[0].gpio_cd = gpio + 0;
@@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
         /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
         gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
-        /* gpio + 1 is "LCD_PWREN" (out, active high) */
-        devkit8000_lcd_device.reset_gpio = gpio + 1;
-        gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
-        /* Disable until needed */
-        gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+        /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
+        devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
+        ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
+                        GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN");
+        if (ret < 0) {
+                devkit8000_lcd_device.reset_gpio = -EINVAL;
+                printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
+        }
 
         /* gpio + 7 is "DVI_PD" (out, active low) */
         devkit8000_dvi_device.reset_gpio = gpio + 7;
-        gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
-        /* Disable until needed */
-        gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
+        ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
+                        GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown");
+        if (ret < 0) {
+                devkit8000_dvi_device.reset_gpio = -EINVAL;
+                printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
+        }
 
         return 0;
 }
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e001a048dc0c..e944025d5ef8 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -409,8 +409,6 @@ static void __init omap4_panda_init(void)
         platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
         omap_serial_init();
         omap4_twl6030_hsmmc_init(mmc);
-        /* OMAP4 Panda uses internal transceiver so register nop transceiver */
-        usb_nop_xceiv_register();
         omap4_ehci_init();
         usb_musb_init(&musb_board_data);
 }
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index cb77be7ac44f..39a71bb8a308 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
 static struct regulator_init_data rm680_vemmc = {
         .constraints =  {
                 .name                   = "rm680_vemmc",
-                .min_uV                 = 2900000,
-                .max_uV                 = 2900000,
-                .apply_uV               = 1,
                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
                                         | REGULATOR_MODE_STANDBY,
                 .valid_ops_mask         = REGULATOR_CHANGE_STATUS
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index fae49d12bc76..98148b6c36e9 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags,
         if (!partition->base) {
                 pr_err("%s: Could not ioremap mux partition at 0x%08x\n",
                         __func__, partition->phys);
+                kfree(partition);
                 return -ENODEV;
         }
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a4aa1920a75c..2f864e4b085d 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -168,9 +168,10 @@ static void omap3_core_restore_context(void)
  * once during boot sequence, but this works as we are not using secure
  * services.
  */
-static void omap3_save_secure_ram_context(u32 target_mpu_state)
+static void omap3_save_secure_ram_context(void)
 {
         u32 ret;
+        int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 
         if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
                 /*
@@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state)
                 pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
                 ret = _omap_save_secure_sram((u32 *)
                                 __pa(omap3_secure_ram_storage));
-                pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state);
+                pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
                 /* Following is for error tracking, it should not happen */
                 if (ret) {
                         printk(KERN_ERR "save_secure_sram() returns %08x\n",
@@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void)
                 local_fiq_disable();
 
                 omap_dma_global_context_save();
-                omap3_save_secure_ram_context(PWRDM_POWER_ON);
+                omap3_save_secure_ram_context();
                 omap_dma_global_context_restore();
 
                 local_irq_enable();
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 77ecebf3fae2..c37e823266d3 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -780,8 +780,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val)
         struct omap_sr *sr_info = (struct omap_sr *) data;
 
         if (!sr_info) {
-                pr_warning("%s: omap_sr struct for sr_%s not found\n",
-                        __func__, sr_info->voltdm->name);
+                pr_warning("%s: omap_sr struct not found\n", __func__);
                 return -EINVAL;
         }
 
@@ -795,8 +794,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
         struct omap_sr *sr_info = (struct omap_sr *) data;
 
         if (!sr_info) {
-                pr_warning("%s: omap_sr struct for sr_%s not found\n",
-                        __func__, sr_info->voltdm->name);
+                pr_warning("%s: omap_sr struct not found\n", __func__);
                 return -EINVAL;
         }
 
@@ -834,7 +832,8 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 
         if (!pdata) {
                 dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
-                return -EINVAL;
+                ret = -EINVAL;
+                goto err_free_devinfo;
         }
 
         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -966,7 +965,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
         }
 
         sr_info = _sr_lookup(pdata->voltdm);
-        if (!sr_info) {
+        if (IS_ERR(sr_info)) {
                 dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
                         __func__);
                 return -EINVAL;
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index ed6079c94c57..12be525b8df4 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -471,6 +471,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
         strcat(name, vdd->voltdm.name);
 
         vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
+        kfree(name);
         if (IS_ERR(vdd->debug_dir)) {
                 pr_warning("%s: Unable to create debugfs directory for"
                         " vdd_%s\n", __func__, vdd->voltdm.name);