ARM: OMAP: fix omap i2c init (regression)

In mainline, the "old style" I2C registration was only removed for
OMAP2, leading to init-time bugs (regressions) like:

    sysfs: duplicate filename 'i2c_omap.1' can not be created
    ------------[ cut here ]------------
    WARNING: at fs/sysfs/dir.c:424 sysfs_add_one+0x40/0xd4()
    Modules linked in:
    	... deletia ...
    [<c0036a38>] (omap_init_i2c+0x0/0x50) from [<c000cea8>] (omap_init_devices+0x10/0x24)
     r4:c001e000
    [<c000ce98>] (omap_init_devices+0x0/0x24) from [<c0008684>] (do_initcalls+0x78/0x200)
    	... deletia ...
    ---[ end trace ca143223eefdc828 ]---
    kobject_add_internal failed for i2c_omap.1 with -EEXIST, don't try to register things with the same name in the same directory.

The fix is obvious:  remove the old init code, it's no longer needed.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 0 insertions, 63 deletions

diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index c5dab1d6417e..4a53f9ba6c43 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -89,68 +89,6 @@ static inline void omap_init_dsp(void) { }
 #endif  /* CONFIG_OMAP_DSP */
 
 /*-------------------------------------------------------------------------*/
-#if     defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define OMAP1_I2C_BASE          0xfffb3800
-#define OMAP2_I2C_BASE1         0x48070000
-#define OMAP_I2C_SIZE           0x3f
-#define OMAP1_I2C_INT           INT_I2C
-#define OMAP2_I2C_INT1          56
-
-static struct resource i2c_resources1[] = {
-        {
-                .start          = 0,
-                .end            = 0,
-                .flags          = IORESOURCE_MEM,
-        },
-        {
-                .start          = 0,
-                .flags          = IORESOURCE_IRQ,
-        },
-};
-
-/* DMA not used; works around erratum writing to non-empty i2c fifo */
-
-static struct platform_device omap_i2c_device1 = {
-        .name           = "i2c_omap",
-        .id             = 1,
-        .num_resources  = ARRAY_SIZE(i2c_resources1),
-        .resource       = i2c_resources1,
-};
-
-/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */
-static void omap_init_i2c(void)
-{
-        if (cpu_is_omap24xx()) {
-                i2c_resources1[0].start = OMAP2_I2C_BASE1;
-                i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE;
-                i2c_resources1[1].start = OMAP2_I2C_INT1;
-        } else {
-                i2c_resources1[0].start = OMAP1_I2C_BASE;
-                i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE;
-                i2c_resources1[1].start = OMAP1_I2C_INT;
-        }
-
-        /* FIXME define and use a boot tag, in case of boards that
-         * either don't wire up I2C, or chips that mux it differently...
-         * it can include clocking and address info, maybe more.
-         */
-        if (cpu_is_omap24xx()) {
-                omap_cfg_reg(M19_24XX_I2C1_SCL);
-                omap_cfg_reg(L15_24XX_I2C1_SDA);
-        } else {
-                omap_cfg_reg(I2C_SCL);
-                omap_cfg_reg(I2C_SDA);
-        }
-
-        (void) platform_device_register(&omap_i2c_device1);
-}
-
-#else
-static inline void omap_init_i2c(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
 #if     defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
 
 static void omap_init_kp(void)
@@ -501,7 +439,6 @@ static int __init omap_init_devices(void)
          * in alphabetical order so they're easier to sort through.
          */
         omap_init_dsp();
-        omap_init_i2c();
         omap_init_kp();
         omap_init_mmc();
         omap_init_uwire();