[ARM] 4489/1: pxa: split pxa_cpu_suspend to processor specific ones

1. split pxa_cpu_suspend to pxa25x_cpu_suspend and pxa27x_cpu_suspend
   and make pxa25x_cpu_pm_enter() and pxa27x_cpu_pm_enter() to invoke
   the corresponding _suspend functions, thus remove all those ugly
   #ifdef .. #endif out of sleep.S

2. move the declarations of those suspend functions to pm.h

note: this is not a clean enough solution until all the pxa25x and
pxa27x specific part is further removed out of sleep.S, sleep.S is
supposed to contain generic code only

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

3 files changed, 75 insertions, 46 deletions

diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 1ec4bf1ff249..6dfcca72e90f 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -180,16 +180,13 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
 
 static void pxa25x_cpu_pm_enter(suspend_state_t state)
 {
-        extern void pxa_cpu_suspend(unsigned int);
-        extern void pxa_cpu_resume(void);
-
         CKEN = 0;
 
         switch (state) {
         case PM_SUSPEND_MEM:
                 /* set resume return address */
                 PSPR = virt_to_phys(pxa_cpu_resume);
-                pxa_cpu_suspend(PWRMODE_SLEEP);
+                pxa25x_cpu_suspend(PWRMODE_SLEEP);
                 break;
         }
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 9240d37e23fa..203371ab19db 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -223,8 +223,6 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 void pxa27x_cpu_pm_enter(suspend_state_t state)
 {
         extern void pxa_cpu_standby(void);
-        extern void pxa_cpu_suspend(unsigned int);
-        extern void pxa_cpu_resume(void);
 
         if (state == PM_SUSPEND_STANDBY)
                 CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) |
@@ -245,7 +243,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
         case PM_SUSPEND_MEM:
                 /* set resume return address */
                 PSPR = virt_to_phys(pxa_cpu_resume);
-                pxa_cpu_suspend(PWRMODE_SLEEP);
+                pxa27x_cpu_suspend(PWRMODE_SLEEP);
                 break;
         }
 }
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 15874b360e51..aff71fec618a 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -17,28 +17,12 @@
 
 #include <asm/arch/pxa-regs.h>
 
-#ifdef CONFIG_PXA27x                    // workaround for Errata 50
 #define MDREFR_KDIV     0x200a4000      // all banks
 #define CCCR_SLEEP      0x00000107      // L=7 2N=2 A=0 PPDIS=0 CPDIS=0
-#endif
 
                 .text
 
-/*
- * pxa_cpu_suspend()
- *
- * Forces CPU into sleep state.
- *
- * r0 = value for PWRMODE M field for desired sleep state
- */
-
-ENTRY(pxa_cpu_suspend)
-
-#ifndef CONFIG_IWMMXT
-        mra     r2, r3, acc0
-#endif
-        stmfd   sp!, {r2 - r12, lr}             @ save registers on stack
-
+pxa_cpu_save_cp:
         @ get coprocessor registers
         mrc     p14, 0, r3, c6, c0, 0           @ clock configuration, for turbo mode
         mrc     p15, 0, r4, c15, c1, 0          @ CP access reg
@@ -54,12 +38,36 @@ ENTRY(pxa_cpu_suspend)
         mov     r10, sp
         stmfd   sp!, {r3 - r10}
 
-        mov r5, r0                              @ save sleep mode
+        mov     pc, lr
+
+pxa_cpu_save_sp:
         @ preserve phys address of stack
         mov     r0, sp
+        mov     r2, lr
         bl      sleep_phys_sp
         ldr     r1, =sleep_save_sp
         str     r0, [r1]
+        mov     pc, r2
+
+/*
+ * pxa27x_cpu_suspend()
+ *
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
+ */
+
+ENTRY(pxa27x_cpu_suspend)
+
+#ifndef CONFIG_IWMMXT
+        mra     r2, r3, acc0
+#endif
+        stmfd   sp!, {r2 - r12, lr}             @ save registers on stack
+
+        bl      pxa_cpu_save_cp
+
+        mov     r5, r0                          @ save sleep mode
+        bl      pxa_cpu_save_sp
 
         @ clean data cache
         bl      xscale_flush_kern_cache_all
@@ -80,13 +88,55 @@ ENTRY(pxa_cpu_suspend)
         @ enable SDRAM self-refresh mode
         orr     r5, r5, #MDREFR_SLFRSH
 
-#ifdef CONFIG_PXA27x
         @ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
         ldr     r6, =MDREFR_KDIV
         orr     r5, r5, r6
-#endif
 
-#ifdef CONFIG_PXA25x
+        @ Intel PXA270 Specification Update notes problems sleeping
+        @ with core operating above 91 MHz
+        @ (see Errata 50, ...processor does not exit from sleep...)
+
+        ldr     r6, =CCCR
+        ldr     r8, [r6]                @ keep original value for resume
+
+        ldr     r7, =CCCR_SLEEP         @ prepare CCCR sleep value
+        mov     r0, #0x2                @ prepare value for CLKCFG
+
+        @ align execution to a cache line
+        b       pxa_cpu_do_suspend
+
+/*
+ * pxa27x_cpu_suspend()
+ *
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
+ */
+
+ENTRY(pxa25x_cpu_suspend)
+        stmfd   sp!, {r2 - r12, lr}             @ save registers on stack
+
+        bl      pxa_cpu_save_cp
+
+        mov     r5, r0                          @ save sleep mode
+        bl      pxa_cpu_save_sp
+
+        @ clean data cache
+        bl      xscale_flush_kern_cache_all
+
+        @ prepare value for sleep mode
+        mov     r1, r5                          @ sleep mode
+
+        @ prepare pointer to physical address 0 (virtual mapping in generic.c)
+        mov     r2, #UNCACHED_PHYS_0
+
+        @ prepare SDRAM refresh settings
+        ldr     r4, =MDREFR
+        ldr     r5, [r4]
+
+        @ enable SDRAM self-refresh mode
+        orr     r5, r5, #MDREFR_SLFRSH
+
         @ Intel PXA255 Specification Update notes problems
         @ about suspending with PXBus operating above 133MHz
         @ (see Errata 31, GPIO output signals, ... unpredictable in sleep
@@ -118,30 +168,15 @@ ENTRY(pxa_cpu_suspend)
         mov     r0, #0
         mcr     p14, 0, r0, c6, c0, 0
         orr     r0, r0, #2                      @ initiate change bit
-#endif
-#ifdef CONFIG_PXA27x
-        @ Intel PXA270 Specification Update notes problems sleeping
-        @ with core operating above 91 MHz
-        @ (see Errata 50, ...processor does not exit from sleep...)
-
-        ldr     r6, =CCCR
-        ldr     r8, [r6]                @ keep original value for resume
-
-        ldr     r7, =CCCR_SLEEP         @ prepare CCCR sleep value
-        mov     r0, #0x2                @ prepare value for CLKCFG
-#endif
-
-        @ align execution to a cache line
-        b       1f
+        b       pxa_cpu_do_suspend
 
         .ltorg
         .align  5
-1:
+pxa_cpu_do_suspend:
 
         @ All needed values are now in registers.
         @ These last instructions should be in cache
 
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
         @ initiate the frequency change...
         str     r7, [r6]
         mcr     p14, 0, r0, c6, c0, 0
@@ -155,7 +190,6 @@ ENTRY(pxa_cpu_suspend)
         mov     r0, #42
 10:     subs    r0, r0, #1
         bne     10b
-#endif
 
         @ Do not reorder...
         @ Intel PXA270 Specification Update notes problems performing