Merge /spare/repo/linux-2.6/

73 files changed, 1150 insertions, 267 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0f2899b4159d..11fff042aa81 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -326,8 +326,8 @@ config SMP
           processor machines. On a single processor machine, the kernel will
           run faster if you say N here.
 
-          See also the <file:Documentation/smp.tex>,
-          <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+          See also the <file:Documentation/smp.txt>,
+          <file:Documentation/i386/IO-APIC.txt>,
           <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
           <http://www.linuxdoc.org/docs.html#howto>.
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 45a5709eaaa4..5d3acff8c596 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -53,7 +53,7 @@ config DEBUG_LL
         bool "Kernel low-level debugging functions"
         depends on DEBUG_KERNEL
         help
-          Say Y here to include definitions of printascii, printchar, printhex
+          Say Y here to include definitions of printascii, printch, printhex
           in the kernel.  This is helpful if you are debugging code that
           executes before the console is initialized.
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 67f1453ade05..130e6228b587 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -175,10 +175,10 @@ else
 endif
         @touch $@
 
-prepare: maketools include/asm-arm/.arch
+archprepare: maketools include/asm-arm/.arch
 
 .PHONY: maketools FORCE
-maketools: include/asm-arm/constants.h include/linux/version.h FORCE
+maketools: include/linux/version.h FORCE
         $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
 
 # Convert bzImage to zImage
@@ -190,7 +190,7 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall install: vmlinux
         $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-CLEAN_FILES += include/asm-arm/constants.h* include/asm-arm/mach-types.h \
+CLEAN_FILES += include/asm-arm/mach-types.h \
                include/asm-arm/arch include/asm-arm/.arch
 
 # We use MRPROPER_FILES and CLEAN_FILES now
@@ -201,11 +201,6 @@ archclean:
 bp:;    $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
 i zi:;  $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
-                                   include/asm-arm/.arch
-
-include/asm-$(ARCH)/constants.h: arch/$(ARCH)/kernel/asm-offsets.s
-        $(call filechk,gen-asm-offsets)
 
 define archhelp
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 51f430cc2fbf..2786f7c34b3f 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -541,6 +541,103 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
         return ret;
 }
 
+#ifdef CONFIG_PM
+
+struct locomo_save_data {
+        u16     LCM_GPO;
+        u16     LCM_SPICT;
+        u16     LCM_GPE;
+        u16     LCM_ASD;
+        u16     LCM_SPIMD;
+};
+
+static int locomo_suspend(struct device *dev, u32 pm_message_t, u32 level)
+{
+        struct locomo *lchip = dev_get_drvdata(dev);
+        struct locomo_save_data *save;
+        unsigned long flags;
+
+        if (level != SUSPEND_DISABLE)
+                return 0;
+
+        save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
+        if (!save)
+                return -ENOMEM;
+
+        dev->power.saved_state = (void *) save;
+
+        spin_lock_irqsave(&lchip->lock, flags);
+
+        save->LCM_GPO     = locomo_readl(lchip->base + LOCOMO_GPO);     /* GPIO */
+        locomo_writel(0x00, lchip->base + LOCOMO_GPO);
+        save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPICT);   /* SPI */
+        locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
+        save->LCM_GPE     = locomo_readl(lchip->base + LOCOMO_GPE);     /* GPIO */
+        locomo_writel(0x00, lchip->base + LOCOMO_GPE);
+        save->LCM_ASD     = locomo_readl(lchip->base + LOCOMO_ASD);     /* ADSTART */
+        locomo_writel(0x00, lchip->base + LOCOMO_ASD);
+        save->LCM_SPIMD   = locomo_readl(lchip->base + LOCOMO_SPIMD);   /* SPI */
+        locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD);
+
+        locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
+        locomo_writel(0x00, lchip->base + LOCOMO_DAC);
+        locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
+
+        if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) )
+                locomo_writel(0x00, lchip->base + LOCOMO_C32K);         /* CLK32 off */
+        else
+                /* 18MHz already enabled, so no wait */
+                locomo_writel(0xc1, lchip->base + LOCOMO_C32K);         /* CLK32 on */
+
+        locomo_writel(0x00, lchip->base + LOCOMO_TADC);         /* 18MHz clock off*/
+        locomo_writel(0x00, lchip->base + LOCOMO_AUDIO + LOCOMO_ACC);                   /* 22MHz/24MHz clock off */
+        locomo_writel(0x00, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);                      /* FL */
+
+        spin_unlock_irqrestore(&lchip->lock, flags);
+
+        return 0;
+}
+
+static int locomo_resume(struct device *dev, u32 level)
+{
+        struct locomo *lchip = dev_get_drvdata(dev);
+        struct locomo_save_data *save;
+        unsigned long r;
+        unsigned long flags;
+        
+        if (level != RESUME_ENABLE)
+                return 0;
+
+        save = (struct locomo_save_data *) dev->power.saved_state;
+        if (!save)
+                return 0;
+
+        spin_lock_irqsave(&lchip->lock, flags);
+
+        locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
+        locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT);
+        locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
+        locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
+        locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD);
+
+        locomo_writel(0x00, lchip->base + LOCOMO_C32K);
+        locomo_writel(0x90, lchip->base + LOCOMO_TADC);
+
+        locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KSC);
+        r = locomo_readl(lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
+        r &= 0xFEFF;
+        locomo_writel(r, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
+        locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD);
+
+        spin_unlock_irqrestore(&lchip->lock, flags);
+
+        dev->power.saved_state = NULL;
+        kfree(save);
+
+        return 0;
+}
+#endif
+
 /**
  *      locomo_probe - probe for a single LoCoMo chip.
  *      @phys_addr: physical address of device.
@@ -707,6 +804,10 @@ static struct device_driver locomo_device_driver = {
         .bus            = &platform_bus_type,
         .probe          = locomo_probe,
         .remove         = locomo_remove,
+#ifdef CONFIG_PM
+        .suspend        = locomo_suspend,
+        .resume         = locomo_resume,
+#endif
 };
 
 /*
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 688a595598c8..d3a04c2a2c85 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -91,7 +91,7 @@ EXPORT_SYMBOL(read_scoop_reg);
 EXPORT_SYMBOL(write_scoop_reg);
 
 #ifdef CONFIG_PM
-static int scoop_suspend(struct device *dev, uint32_t state, uint32_t level)
+static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
 {
         if (level == SUSPEND_POWER_DOWN) {
                 struct scoop_dev *sdev = dev_get_drvdata(dev);
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 96a794d8de84..756348bf5170 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git4
-# Wed Jun 22 15:56:42 2005
+# Linux kernel version: 2.6.13-git8
+# Thu Sep  8 19:24:02 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -22,6 +22,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -88,7 +90,9 @@ CONFIG_ARCH_S3C2410=y
 #
 # S3C24XX Implementations
 #
+CONFIG_MACH_ANUBIS=y
 CONFIG_ARCH_BAST=y
+CONFIG_BAST_PC104_IRQ=y
 CONFIG_ARCH_H1940=y
 CONFIG_MACH_N30=y
 CONFIG_ARCH_SMDK2410=y
@@ -112,6 +116,7 @@ CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
 # CONFIG_S3C2410_PM_DEBUG is not set
 # CONFIG_S3C2410_PM_CHECK is not set
+CONFIG_PM_SIMTEC=y
 CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
 
 #
@@ -149,7 +154,15 @@ CONFIG_ISA_DMA_API=y
 #
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -186,6 +199,74 @@ CONFIG_PM=y
 CONFIG_APM=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -258,6 +339,7 @@ CONFIG_MTD_ROM=y
 # CONFIG_MTD_IMPA7 is not set
 CONFIG_MTD_BAST=y
 CONFIG_MTD_BAST_MAXSIZE=4
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -312,7 +394,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -354,6 +435,7 @@ CONFIG_BLK_DEV_IDE_BAST=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -376,70 +458,8 @@ CONFIG_BLK_DEV_IDE_BAST=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -447,6 +467,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -480,6 +505,8 @@ CONFIG_DM9000=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -562,7 +589,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -605,7 +631,6 @@ CONFIG_S3C2410_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -628,7 +653,7 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_ISA is not set
+CONFIG_I2C_ISA=m
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 CONFIG_I2C_S3C2410=y
@@ -636,14 +661,33 @@ CONFIG_I2C_S3C2410=y
 # CONFIG_I2C_PCA_ISA is not set
 
 #
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
 #
-CONFIG_I2C_SENSOR=m
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=m
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
@@ -662,27 +706,21 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Other I2C Chip support
+# Misc devices
 #
-# CONFIG_SENSORS_DS1337 is not set
-CONFIG_SENSORS_EEPROM=m
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 
 #
-# Misc devices
+# Multimedia Capabilities Port drivers
 #
 
 #
@@ -731,7 +769,7 @@ CONFIG_DUMMY_CONSOLE=y
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
@@ -749,6 +787,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -758,6 +797,7 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 
 #
 # XFS support
@@ -765,6 +805,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -791,11 +832,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -812,8 +853,7 @@ CONFIG_JFFS_FS_VERBOSE=0
 # CONFIG_JFFS_PROC_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -835,6 +875,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -920,6 +961,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_MAGIC_SYSRQ is not set
 CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index db07ce42b3b2..949ec4427f21 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -10,7 +10,7 @@
  *  This file is included twice in entry-common.S
  */
 #ifndef NR_syscalls
-#define NR_syscalls 320
+#define NR_syscalls 328
 #else
 
 __syscall_start:
@@ -333,6 +333,9 @@ __syscall_start:
                 .long   sys_inotify_init
                 .long   sys_inotify_add_watch
                 .long   sys_inotify_rm_watch
+                .long   sys_mbind_wrapper
+/* 320 */       .long   sys_get_mempolicy
+                .long   sys_set_mempolicy
 __syscall_end:
 
                 .rept   NR_syscalls - (__syscall_end - __syscall_start) / 4
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 6281d488ac97..db302c6e5343 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -269,6 +269,10 @@ sys_arm_fadvise64_64_wrapper:
                 str     r5, [sp, #4]            @ push r5 to stack
                 b       sys_arm_fadvise64_64
 
+sys_mbind_wrapper:
+                str     r5, [sp, #4]
+                b       sys_mbind
+
 /*
  * Note: off_4k (r5) is always units of 4K.  If we can't do the requested
  * offset, we return EINVAL.
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index afef21273963..648cfff93138 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -3,7 +3,7 @@
 #include <linux/linkage.h>
 
 #include <asm/assembler.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/errno.h>
 #include <asm/thread_info.h>
 
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 1155cf07c871..539626351348 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -20,7 +20,7 @@
 #include <asm/mach-types.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index 8f74e24536ba..24c7b0477a09 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -17,7 +17,7 @@
 #include <linux/linkage.h>
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 
 #define MMX_WR0                 (0x00)
 #define MMX_WR1                 (0x08)
diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S
index 4c38abdbe497..68117968482b 100644
--- a/arch/arm/lib/copy_page.S
+++ b/arch/arm/lib/copy_page.S
@@ -11,7 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 
 #define COPY_COUNT (PAGE_SZ/64 PLD( -1 ))
 
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 46a2dc962e9d..333bca292de9 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -13,7 +13,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/errno.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 
                 .text
 
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 64aa6f4fe5e4..d204018070a4 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -26,7 +26,7 @@
  * Note that ADDR_LIMIT is either 0 or 0xc0000000.
  * Note also that it is intended that __get_user_bad is not global.
  */
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/errno.h>
 
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index b09398d95aac..4593e9c07f05 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -26,7 +26,7 @@
  * Note that ADDR_LIMIT is either 0 or 0xc0000000
  * Note also that it is intended that __put_user_bad is not global.
  */
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/errno.h>
 
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index 112f1d68fb2b..e216ab8b9e8f 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -354,7 +354,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device serial_device = {
         .name                   = "serial8250",
-        .id                     = 0,
+        .id                     = PLAT8250_DEV_PLATFORM,
         .dev                    = {
                 .platform_data  = serial_platform_data,
         },
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 23c4da10101b..5aeadfd72143 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -219,7 +219,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device serial_device = {
         .name                   = "serial8250",
-        .id                     = 0,
+        .id                     = PLAT8250_DEV_PLATFORM,
         .dev                    = {
                 .platform_data  = serial_platform_data,
         },
diff --git a/arch/arm/mach-epxa10db/arch.c b/arch/arm/mach-epxa10db/arch.c
index 7daa021676d0..44c56571d183 100644
--- a/arch/arm/mach-epxa10db/arch.c
+++ b/arch/arm/mach-epxa10db/arch.c
@@ -52,7 +52,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device serial_device = {
         .name                   = "serial8250",
-        .id                     = 0,
+        .id                     = PLAT8250_DEV_PLATFORM,
         .dev                    = {
                 .platform_data  = serial_platform_data,
         },
diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c
index aa3a1fef563e..28846c7edaaf 100644
--- a/arch/arm/mach-footbridge/isa.c
+++ b/arch/arm/mach-footbridge/isa.c
@@ -34,7 +34,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device serial_device = {
         .name                   = "serial8250",
-        .id                     = 0,
+        .id                     = PLAT8250_DEV_PLATFORM,
         .dev                    = {
                 .platform_data  = serial_platform_data,
         },
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index 4b3199319e68..a4a7c0125d03 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -90,7 +90,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device serial_device = {
         .name                   = "serial8250",
-        .id                     = 0,
+        .id                     = PLAT8250_DEV_PLATFORM,
         .dev                    = {
                 .platform_data  = serial_platform_data,
         },
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 098c817a7fb8..74bd2fd602d4 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -174,7 +174,7 @@ static struct resource ixp2000_uart_resource = {
 
 static struct platform_device ixp2000_serial_device = {
         .name           = "serial8250",
-        .id             = 0,
+        .id             = PLAT8250_DEV_PLATFORM,
         .dev            = {
                 .platform_data          = ixp2000_serial_port,
         },
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 8b2f25322452..050c92768913 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -66,7 +66,7 @@ static struct plat_serial8250_port coyote_uart_data[] = {
 
 static struct platform_device coyote_uart = {
         .name           = "serial8250",
-        .id             = 0,
+        .id             = PLAT8250_DEV_PLATFORM,
         .dev                    = {
                 .platform_data  = coyote_uart_data,
         },
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 3fd92c5cbaa8..29a6d02fa851 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -93,7 +93,7 @@ static struct plat_serial8250_port gtwx5715_uart_platform_data[] = {
 
 static struct platform_device gtwx5715_uart_device = {
         .name           = "serial8250",
-        .id             = 0,
+        .id             = PLAT8250_DEV_PLATFORM,
         .dev                    = {
                 .platform_data  = gtwx5715_uart_platform_data,
         },
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 6c14ff3c23a0..ae1fa099d5fa 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -96,7 +96,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
 
 static struct platform_device ixdp425_uart = {
         .name                   = "serial8250",
-        .id                     = 0,
+        .id                     = PLAT8250_DEV_PLATFORM,
         .dev.platform_data      = ixdp425_uart_data,
         .num_resources          = 2,
         .resource               = ixdp425_uart_resources
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 7408ac94f771..27fc2e8e5fca 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -47,6 +47,14 @@ config MACH_OMAP_OSK
           TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
           if you have such a board.
 
+config OMAP_OSK_MISTRAL
+        bool "Mistral QVGA board Support"
+        depends on MACH_OMAP_OSK
+        help
+          The OSK supports an optional add-on board with a Quarter-VGA
+          touchscreen, PDA-ish buttons, a resume button, bicolor LED,
+          and camera connector.  Say Y here if you have this board.
+
 config MACH_OMAP_PERSEUS2
         bool "TI Perseus2"
         depends on ARCH_OMAP1 && ARCH_OMAP730
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index d386fd913f0c..181a93deaaee 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := io.o id.o irq.o time.o serial.o
+obj-y := io.o id.o irq.o time.o serial.o devices.o
 led-y := leds.o
 
 # Specific board support
@@ -23,6 +23,7 @@ endif
 
 # LEDs support
 led-$(CONFIG_MACH_OMAP_H2)              += leds-h2p2-debug.o
+led-$(CONFIG_MACH_OMAP_H3)              += leds-h2p2-debug.o
 led-$(CONFIG_MACH_OMAP_INNOVATOR)       += leds-innovator.o
 led-$(CONFIG_MACH_OMAP_PERSEUS2)        += leds-h2p2-debug.o
 led-$(CONFIG_MACH_OMAP_OSK)             += leds-osk.o
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 122796ebe8f5..c209c7172a9a 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -48,19 +48,43 @@ static struct omap_usb_config generic1510_usb_config __initdata = {
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 static struct omap_usb_config generic1610_usb_config __initdata = {
+#ifdef CONFIG_USB_OTG
+        .otg            = 1,
+#endif
         .register_host  = 1,
         .register_dev   = 1,
         .hmc_mode       = 16,
         .pins[0]        = 6,
 };
+
+static struct omap_mmc_config generic_mmc_config __initdata = {
+        .mmc [0] = {
+                .enabled        = 0,
+                .wire4          = 0,
+                .wp_pin         = -1,
+                .power_pin      = -1,
+                .switch_pin     = -1,
+        },
+        .mmc [1] = {
+                .enabled        = 0,
+                .wire4          = 0,
+                .wp_pin         = -1,
+                .power_pin      = -1,
+                .switch_pin     = -1,
+        },
+};
+
 #endif
 
 static struct omap_board_config_kernel generic_config[] = {
         { OMAP_TAG_USB,           NULL },
+        { OMAP_TAG_MMC,           &generic_mmc_config },
 };
 
 static void __init omap_generic_init(void)
 {
+        const struct omap_uart_config *uart_conf;
+
         /*
          * Make sure the serial ports are muxed on at this point.
          * You have to mux them off in device drivers later on
@@ -76,6 +100,18 @@ static void __init omap_generic_init(void)
                 generic_config[0].data = &generic1610_usb_config;
         }
 #endif
+
+        uart_conf = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
+        if (uart_conf != NULL) {
+                unsigned int enabled_ports, i;
+
+                enabled_ports = uart_conf->enabled_uarts;
+                for (i = 0; i < 3; i++) {
+                        if (!(enabled_ports & (1 << i)))
+                                generic_serial_ports[i] = 0;
+                }
+        }
+
         omap_board_config = generic_config;
         omap_board_config_size = ARRAY_SIZE(generic_config);
         omap_serial_init(generic_serial_ports);
@@ -83,7 +119,7 @@ static void __init omap_generic_init(void)
 
 static void __init omap_generic_map_io(void)
 {
-        omap_map_common_io()
+        omap_map_common_io();
 }
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index f4983ee95ab4..d46a70063b0c 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -33,6 +33,7 @@
 #include <asm/mach/map.h>
 
 #include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/common.h>
@@ -80,8 +81,7 @@ static struct flash_platform_data h2_flash_data = {
 };
 
 static struct resource h2_flash_resource = {
-        .start          = OMAP_CS2B_PHYS,
-        .end            = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
+        /* This is on CS3, wherever it's mapped */
         .flags          = IORESOURCE_MEM,
 };
 
@@ -126,10 +126,9 @@ static void __init h2_init_smc91x(void)
                 printk("Error requesting gpio 0 for smc91x irq\n");
                 return;
         }
-        omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE);
 }
 
-void h2_init_irq(void)
+static void __init h2_init_irq(void)
 {
         omap_init_irq();
         omap_gpio_init();
@@ -152,9 +151,13 @@ static struct omap_usb_config h2_usb_config __initdata = {
 };
 
 static struct omap_mmc_config h2_mmc_config __initdata = {
-        .mmc_blocks             = 1,
-        .mmc1_power_pin         = -1,   /* tps65010 gpio3 */
-        .mmc1_switch_pin        = OMAP_MPUIO(1),
+        .mmc [0] = {
+                .enabled        = 1,
+                .wire4          = 1,
+                .wp_pin         = OMAP_MPUIO(3),
+                .power_pin      = -1,   /* tps65010 gpio3 */
+                .switch_pin     = OMAP_MPUIO(1),
+        },
 };
 
 static struct omap_board_config_kernel h2_config[] = {
@@ -164,6 +167,16 @@ static struct omap_board_config_kernel h2_config[] = {
 
 static void __init h2_init(void)
 {
+        /* NOTE: revC boards support NAND-boot, which can put NOR on CS2B
+         * and NAND (either 16bit or 8bit) on CS3.
+         */
+        h2_flash_resource.end = h2_flash_resource.start = omap_cs3_phys();
+        h2_flash_resource.end += SZ_32M - 1;
+
+        /* MMC:  card detect and WP */
+        // omap_cfg_reg(U19_ARMIO1);            /* CD */
+        omap_cfg_reg(BALLOUT_V8_ARMIO3);        /* WP */
+
         platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
         omap_board_config = h2_config;
         omap_board_config_size = ARRAY_SIZE(h2_config);
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 7cd419d61b40..2798613696fa 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -82,8 +82,7 @@ static struct flash_platform_data h3_flash_data = {
 };
 
 static struct resource h3_flash_resource = {
-        .start          = OMAP_CS2B_PHYS,
-        .end            = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
+        /* This is on CS3, wherever it's mapped */
         .flags          = IORESOURCE_MEM,
 };
 
@@ -161,13 +160,26 @@ static struct omap_usb_config h3_usb_config __initdata = {
         .pins[1]        = 3,
 };
 
+static struct omap_mmc_config h3_mmc_config __initdata = {
+        .mmc[0] = {
+                .enabled        = 1,
+                .power_pin      = -1,   /* tps65010 GPIO4 */
+                .switch_pin     = OMAP_MPUIO(1),
+        },
+};
+
 static struct omap_board_config_kernel h3_config[] = {
         { OMAP_TAG_USB,  &h3_usb_config },
+        { OMAP_TAG_MMC,  &h3_mmc_config },
 };
 
 static void __init h3_init(void)
 {
+        h3_flash_resource.end = h3_flash_resource.start = omap_cs3_phys();
+        h3_flash_resource.end += OMAP_CS3_SIZE - 1;
         (void) platform_add_devices(devices, ARRAY_SIZE(devices));
+        omap_board_config = h3_config;
+        omap_board_config_size = ARRAY_SIZE(h3_config);
 }
 
 static void __init h3_init_smc91x(void)
@@ -177,7 +189,6 @@ static void __init h3_init_smc91x(void)
                 printk("Error requesting gpio 40 for smc91x irq\n");
                 return;
         }
-        omap_set_gpio_edge_ctrl(40, OMAP_GPIO_FALLING_EDGE);
 }
 
 void h3_init_irq(void)
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 91de60a91ef8..df0312b596e4 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -29,6 +29,7 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
+#include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/tc.h>
@@ -173,7 +174,6 @@ static void __init innovator_init_smc91x(void)
                         printk("Error requesting gpio 0 for smc91x irq\n");
                         return;
                 }
-                omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE);
         }
 }
 
@@ -220,8 +220,19 @@ static struct omap_usb_config h2_usb_config __initdata = {
 };
 #endif
 
+static struct omap_mmc_config innovator_mmc_config __initdata = {
+        .mmc [0] = {
+                .enabled        = 1,
+                .wire4          = 1,
+                .wp_pin         = OMAP_MPUIO(3),
+                .power_pin      = -1,   /* FPGA F3 UIO42 */
+                .switch_pin     = -1,   /* FPGA F4 UIO43 */
+        },
+};
+
 static struct omap_board_config_kernel innovator_config[] = {
         { OMAP_TAG_USB,         NULL },
+        { OMAP_TAG_MMC,         &innovator_mmc_config },
 };
 
 static void __init innovator_init(void)
diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c
index 6750b2014092..d904e643f5ec 100644
--- a/arch/arm/mach-omap1/board-netstar.c
+++ b/arch/arm/mach-omap1/board-netstar.c
@@ -75,16 +75,15 @@ static void __init netstar_init(void)
         mdelay(50);     /* 50ms until PHY ready */
         /* smc91x interrupt pin */
         omap_request_gpio(8);
-        omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
 
         omap_request_gpio(12);
         omap_request_gpio(13);
         omap_request_gpio(14);
         omap_request_gpio(15);
-        omap_set_gpio_edge_ctrl(12, OMAP_GPIO_FALLING_EDGE);
-        omap_set_gpio_edge_ctrl(13, OMAP_GPIO_FALLING_EDGE);
-        omap_set_gpio_edge_ctrl(14, OMAP_GPIO_FALLING_EDGE);
-        omap_set_gpio_edge_ctrl(15, OMAP_GPIO_FALLING_EDGE);
+        set_irq_type(OMAP_GPIO_IRQ(12), IRQT_FALLING);
+        set_irq_type(OMAP_GPIO_IRQ(13), IRQT_FALLING);
+        set_irq_type(OMAP_GPIO_IRQ(14), IRQT_FALLING);
+        set_irq_type(OMAP_GPIO_IRQ(15), IRQT_FALLING);
 
         platform_add_devices(netstar_devices, ARRAY_SIZE(netstar_devices));
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 6844e536c698..21103df50415 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -29,11 +29,16 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/interrupt.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/flash.h>
 
 #include <asm/arch/gpio.h>
 #include <asm/arch/usb.h>
@@ -41,12 +46,56 @@
 #include <asm/arch/tc.h>
 #include <asm/arch/common.h>
 
-static struct map_desc osk5912_io_desc[] __initdata = {
-{ OMAP_OSK_NOR_FLASH_BASE, OMAP_OSK_NOR_FLASH_START, OMAP_OSK_NOR_FLASH_SIZE,
-        MT_DEVICE },
+static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0};
+
+static struct mtd_partition osk_partitions[] = {
+        /* bootloader (U-Boot, etc) in first sector */
+        {
+              .name             = "bootloader",
+              .offset           = 0,
+              .size             = SZ_128K,
+              .mask_flags       = MTD_WRITEABLE, /* force read-only */
+        },
+        /* bootloader params in the next sector */
+        {
+              .name             = "params",
+              .offset           = MTDPART_OFS_APPEND,
+              .size             = SZ_128K,
+              .mask_flags       = 0,
+        }, {
+              .name             = "kernel",
+              .offset           = MTDPART_OFS_APPEND,
+              .size             = SZ_2M,
+              .mask_flags       = 0
+        }, {
+              .name             = "filesystem",
+              .offset           = MTDPART_OFS_APPEND,
+              .size             = MTDPART_SIZ_FULL,
+              .mask_flags       = 0
+        }
 };
 
-static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0};
+static struct flash_platform_data osk_flash_data = {
+        .map_name       = "cfi_probe",
+        .width          = 2,
+        .parts          = osk_partitions,
+        .nr_parts       = ARRAY_SIZE(osk_partitions),
+};
+
+static struct resource osk_flash_resource = {
+        /* this is on CS3, wherever it's mapped */
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device osk5912_flash_device = {
+        .name           = "omapflash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &osk_flash_data,
+        },
+        .num_resources  = 1,
+        .resource       = &osk_flash_resource,
+};
 
 static struct resource osk5912_smc91x_resources[] = {
         [0] = {
@@ -86,9 +135,16 @@ static struct platform_device osk5912_cf_device = {
         .resource       = osk5912_cf_resources,
 };
 
+static struct platform_device osk5912_mcbsp1_device = {
+        .name           = "omap_mcbsp",
+        .id             = 1,
+};
+
 static struct platform_device *osk5912_devices[] __initdata = {
+        &osk5912_flash_device,
         &osk5912_smc91x_device,
         &osk5912_cf_device,
+        &osk5912_mcbsp1_device,
 };
 
 static void __init osk_init_smc91x(void)
@@ -97,7 +153,6 @@ static void __init osk_init_smc91x(void)
                 printk("Error requesting gpio 0 for smc91x irq\n");
                 return;
         }
-        omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE);
 
         /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
         EMIFS_CCS(1) |= 0x2;
@@ -110,11 +165,11 @@ static void __init osk_init_cf(void)
                 printk("Error requesting gpio 62 for CF irq\n");
                 return;
         }
-        /* it's really active-low */
-        omap_set_gpio_edge_ctrl(62, OMAP_GPIO_FALLING_EDGE);
+        /* the CF I/O IRQ is really active-low */
+        set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING);
 }
 
-void osk_init_irq(void)
+static void __init osk_init_irq(void)
 {
         omap_init_irq();
         omap_gpio_init();
@@ -142,18 +197,69 @@ static struct omap_board_config_kernel osk_config[] = {
         { OMAP_TAG_USB,           &osk_usb_config },
 };
 
+#ifdef  CONFIG_OMAP_OSK_MISTRAL
+
+#ifdef  CONFIG_PM
+static irqreturn_t
+osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
+{
+        return IRQ_HANDLED;
+}
+#endif
+
+static void __init osk_mistral_init(void)
+{
+        /* FIXME here's where to feed in framebuffer, touchpad, and
+         * keyboard setup ...  not in the drivers for those devices!
+         *
+         * NOTE:  we could actually tell if there's a Mistral board
+         * attached, e.g. by trying to read something from the ads7846.
+         * But this is too early for that...
+         */
+
+        /* the sideways button (SW1) is for use as a "wakeup" button */
+        omap_cfg_reg(N15_1610_MPUIO2);
+        if (omap_request_gpio(OMAP_MPUIO(2)) == 0) {
+                int ret = 0;
+                omap_set_gpio_direction(OMAP_MPUIO(2), 1);
+                set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
+#ifdef  CONFIG_PM
+                /* share the IRQ in case someone wants to use the
+                 * button for more than wakeup from system sleep.
+                 */
+                ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)),
+                                &osk_mistral_wake_interrupt,
+                                SA_SHIRQ, "mistral_wakeup",
+                                &osk_mistral_wake_interrupt);
+                if (ret != 0) {
+                        omap_free_gpio(OMAP_MPUIO(2));
+                        printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
+                                ret);
+                } else
+                        enable_irq_wake(OMAP_GPIO_IRQ(OMAP_MPUIO(2)));
+#endif
+        } else
+                printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
+}
+#else
+static void __init osk_mistral_init(void) { }
+#endif
+
 static void __init osk_init(void)
 {
+        osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
+        osk_flash_resource.end += SZ_32M - 1;
         platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
         omap_board_config = osk_config;
         omap_board_config_size = ARRAY_SIZE(osk_config);
         USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
+
+        osk_mistral_init();
 }
 
 static void __init osk_map_io(void)
 {
         omap_map_common_io();
-        iotable_init(osk5912_io_desc, ARRAY_SIZE(osk5912_io_desc));
         omap_serial_init(osk_serial_ports);
 }
 
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 213317392d9b..107c68c8ab54 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -24,6 +24,7 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
+#include <asm/arch/tc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
@@ -83,8 +84,8 @@ static struct flash_platform_data p2_flash_data = {
 };
 
 static struct resource p2_flash_resource = {
-        .start          = OMAP_FLASH_0_START,
-        .end            = OMAP_FLASH_0_START + OMAP_FLASH_0_SIZE - 1,
+        .start          = OMAP_CS0_PHYS,
+        .end            = OMAP_CS0_PHYS + SZ_32M - 1,
         .flags          = IORESOURCE_MEM,
 };
 
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index e42281988990..bf30b1acda0b 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -25,13 +25,14 @@
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
+#include <asm/arch/common.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/tc.h>
 #include <asm/arch/mux.h>
+#include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
-#include <asm/arch/common.h>
 
 extern void omap_init_time(void);
 extern int omap_gpio_init(void);
@@ -74,7 +75,7 @@ static struct plat_serial8250_port voiceblue_ports[] = {
 
 static struct platform_device serial_device = {
         .name                   = "serial8250",
-        .id                     = 1,
+        .id                     = PLAT8250_DEV_PLATFORM1,
         .dev                    = {
                 .platform_data  = voiceblue_ports,
         },
@@ -86,6 +87,27 @@ static int __init ext_uart_init(void)
 }
 arch_initcall(ext_uart_init);
 
+static struct flash_platform_data voiceblue_flash_data = {
+        .map_name       = "cfi_probe",
+        .width          = 2,
+};
+
+static struct resource voiceblue_flash_resource = {
+        .start  = OMAP_CS0_PHYS,
+        .end    = OMAP_CS0_PHYS + SZ_32M - 1,
+        .flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device voiceblue_flash_device = {
+        .name           = "omapflash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &voiceblue_flash_data,
+        },
+        .num_resources  = 1,
+        .resource       = &voiceblue_flash_resource,
+};
+
 static struct resource voiceblue_smc91x_resources[] = {
         [0] = {
                 .start  = OMAP_CS2_PHYS + 0x300,
@@ -107,6 +129,7 @@ static struct platform_device voiceblue_smc91x_device = {
 };
 
 static struct platform_device *voiceblue_devices[] __initdata = {
+        &voiceblue_flash_device,
         &voiceblue_smc91x_device,
 };
 
@@ -119,8 +142,17 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
         .pins[2]        = 6,
 };
 
+static struct omap_mmc_config voiceblue_mmc_config __initdata = {
+        .mmc[0] = {
+                .enabled        = 1,
+                .power_pin      = 2,
+                .switch_pin     = -1,
+        },
+};
+
 static struct omap_board_config_kernel voiceblue_config[] = {
         { OMAP_TAG_USB, &voiceblue_usb_config },
+        { OMAP_TAG_MMC, &voiceblue_mmc_config },
 };
 
 static void __init voiceblue_init_irq(void)
@@ -131,9 +163,6 @@ static void __init voiceblue_init_irq(void)
 
 static void __init voiceblue_init(void)
 {
-        /* There is a good chance board is going up, so enable Power LED
-         * (it is connected through invertor) */
-        omap_writeb(0x00, OMAP_LPG1_LCR);
         /* Watchdog */
         omap_request_gpio(0);
         /* smc91x reset */
@@ -145,7 +174,6 @@ static void __init voiceblue_init(void)
         mdelay(50);     /* 50ms until PHY ready */
         /* smc91x interrupt pin */
         omap_request_gpio(8);
-        omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
         /* 16C554 reset*/
         omap_request_gpio(6);
         omap_set_gpio_direction(6, 0);
@@ -155,14 +183,19 @@ static void __init voiceblue_init(void)
         omap_request_gpio(13);
         omap_request_gpio(14);
         omap_request_gpio(15);
-        omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE);
-        omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE);
-        omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE);
-        omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE);
+        set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING);
 
         platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
         omap_board_config = voiceblue_config;
         omap_board_config_size = ARRAY_SIZE(voiceblue_config);
+
+        /* There is a good chance board is going up, so enable power LED
+         * (it is connected through invertor) */
+        omap_writeb(0x00, OMAP_LPG1_LCR);
+        omap_writeb(0x00, OMAP_LPG1_PMR);       /* Disable clock */
 }
 
 static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
@@ -184,9 +217,9 @@ static int panic_event(struct notifier_block *this, unsigned long event,
         if (test_and_set_bit(MACHINE_PANICED, &machine_state))
                 return NOTIFY_DONE;
 
-        /* Flash Power LED
-         * (TODO: Enable clock right way (enabled in bootloader already)) */
+        /* Flash power LED */
         omap_writeb(0x78, OMAP_LPG1_LCR);
+        omap_writeb(0x01, OMAP_LPG1_PMR);       /* Enable clock */
 
         return NOTIFY_DONE;
 }
@@ -195,15 +228,14 @@ static struct notifier_block panic_block = {
         .notifier_call  = panic_event,
 };
 
-static int __init setup_notifier(void)
+static int __init voiceblue_setup(void)
 {
         /* Setup panic notifier */
         notifier_chain_register(&panic_notifier_list, &panic_block);
 
         return 0;
 }
-
-postcore_initcall(setup_notifier);
+postcore_initcall(voiceblue_setup);
 
 static int wdt_gpio_state;
 
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
new file mode 100644
index 000000000000..e8b3981444cd
--- /dev/null
+++ b/arch/arm/mach-omap1/devices.c
@@ -0,0 +1,351 @@
+/*
+ * linux/arch/arm/mach-omap1/devices.c
+ *
+ * OMAP1 platform device setup/initialization
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/gpio.h>
+
+
+static void omap_nop_release(struct device *dev)
+{
+        /* Nothing */
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if     defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+
+#define OMAP_I2C_BASE           0xfffb3800
+
+static struct resource i2c_resources[] = {
+        {
+                .start          = OMAP_I2C_BASE,
+                .end            = OMAP_I2C_BASE + 0x3f,
+                .flags          = IORESOURCE_MEM,
+        },
+        {
+                .start          = INT_I2C,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+/* DMA not used; works around erratum writing to non-empty i2c fifo */
+
+static struct platform_device omap_i2c_device = {
+        .name           = "i2c_omap",
+        .id             = -1,
+        .dev = {
+                .release        = omap_nop_release,
+        },
+        .num_resources  = ARRAY_SIZE(i2c_resources),
+        .resource       = i2c_resources,
+};
+
+static void omap_init_i2c(void)
+{
+        /* FIXME define and use a boot tag, in case of boards that
+         * either don't wire up I2C, or chips that mux it differently...
+         * it can include clocking and address info, maybe more.
+         */
+        omap_cfg_reg(I2C_SCL);
+        omap_cfg_reg(I2C_SDA);
+
+        (void) platform_device_register(&omap_i2c_device);
+}
+#else
+static inline void omap_init_i2c(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if     defined(CONFIG_OMAP1610_IR) || defined(CONFIG_OMAP161O_IR_MODULE)
+
+static u64 irda_dmamask = 0xffffffff;
+
+static struct platform_device omap1610ir_device = {
+        .name = "omap1610-ir",
+        .id = -1,
+        .dev = {
+                .release        = omap_nop_release,
+                .dma_mask       = &irda_dmamask,
+        },
+};
+
+static void omap_init_irda(void)
+{
+        /* FIXME define and use a boot tag, members something like:
+         *  u8          uart;           // uart1, or uart3
+         * ... but driver only handles uart3 for now
+         *  s16         fir_sel;        // gpio for SIR vs FIR
+         * ... may prefer a callback for SIR/MIR/FIR mode select;
+         * while h2 uses a GPIO, H3 uses a gpio expander
+         */
+        if (machine_is_omap_h2()
+                        || machine_is_omap_h3())
+                (void) platform_device_register(&omap1610ir_device);
+}
+#else
+static inline void omap_init_irda(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if     defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+#define OMAP_MMC1_BASE          0xfffb7800
+#define OMAP_MMC2_BASE          0xfffb7c00      /* omap16xx only */
+
+static struct omap_mmc_conf mmc1_conf;
+
+static u64 mmc1_dmamask = 0xffffffff;
+
+static struct resource mmc1_resources[] = {
+        {
+                .start          = IO_ADDRESS(OMAP_MMC1_BASE),
+                .end            = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
+                .flags          = IORESOURCE_MEM,
+        },
+        {
+                .start          = INT_MMC,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mmc_omap_device1 = {
+        .name           = "mmci-omap",
+        .id             = 1,
+        .dev = {
+                .release        = omap_nop_release,
+                .dma_mask       = &mmc1_dmamask,
+                .platform_data  = &mmc1_conf,
+        },
+        .num_resources  = ARRAY_SIZE(mmc1_resources),
+        .resource       = mmc1_resources,
+};
+
+#ifdef  CONFIG_ARCH_OMAP16XX
+
+static struct omap_mmc_conf mmc2_conf;
+
+static u64 mmc2_dmamask = 0xffffffff;
+
+static struct resource mmc2_resources[] = {
+        {
+                .start          = IO_ADDRESS(OMAP_MMC2_BASE),
+                .end            = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
+                .flags          = IORESOURCE_MEM,
+        },
+        {
+                .start          = INT_1610_MMC2,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mmc_omap_device2 = {
+        .name           = "mmci-omap",
+        .id             = 2,
+        .dev = {
+                .release        = omap_nop_release,
+                .dma_mask       = &mmc2_dmamask,
+                .platform_data  = &mmc2_conf,
+        },
+        .num_resources  = ARRAY_SIZE(mmc2_resources),
+        .resource       = mmc2_resources,
+};
+#endif
+
+static void __init omap_init_mmc(void)
+{
+        const struct omap_mmc_config    *mmc_conf;
+        const struct omap_mmc_conf      *mmc;
+
+        /* NOTE:  assumes MMC was never (wrongly) enabled */
+        mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+        if (!mmc_conf)
+                return;
+
+        /* block 1 is always available and has just one pinout option */
+        mmc = &mmc_conf->mmc[0];
+        if (mmc->enabled) {
+                omap_cfg_reg(MMC_CMD);
+                omap_cfg_reg(MMC_CLK);
+                omap_cfg_reg(MMC_DAT0);
+                if (cpu_is_omap1710()) {
+                      omap_cfg_reg(M15_1710_MMC_CLKI);
+                      omap_cfg_reg(P19_1710_MMC_CMDDIR);
+                      omap_cfg_reg(P20_1710_MMC_DATDIR0);
+                }
+                if (mmc->wire4) {
+                        omap_cfg_reg(MMC_DAT1);
+                        /* NOTE:  DAT2 can be on W10 (here) or M15 */
+                        if (!mmc->nomux)
+                                omap_cfg_reg(MMC_DAT2);
+                        omap_cfg_reg(MMC_DAT3);
+                }
+                mmc1_conf = *mmc;
+                (void) platform_device_register(&mmc_omap_device1);
+        }
+
+#ifdef  CONFIG_ARCH_OMAP16XX
+        /* block 2 is on newer chips, and has many pinout options */
+        mmc = &mmc_conf->mmc[1];
+        if (mmc->enabled) {
+                if (!mmc->nomux) {
+                        omap_cfg_reg(Y8_1610_MMC2_CMD);
+                        omap_cfg_reg(Y10_1610_MMC2_CLK);
+                        omap_cfg_reg(R18_1610_MMC2_CLKIN);
+                        omap_cfg_reg(W8_1610_MMC2_DAT0);
+                        if (mmc->wire4) {
+                                omap_cfg_reg(V8_1610_MMC2_DAT1);
+                                omap_cfg_reg(W15_1610_MMC2_DAT2);
+                                omap_cfg_reg(R10_1610_MMC2_DAT3);
+                        }
+
+                        /* These are needed for the level shifter */
+                        omap_cfg_reg(V9_1610_MMC2_CMDDIR);
+                        omap_cfg_reg(V5_1610_MMC2_DATDIR0);
+                        omap_cfg_reg(W19_1610_MMC2_DATDIR1);
+                }
+
+                /* Feedback clock must be set on OMAP-1710 MMC2 */
+                if (cpu_is_omap1710())
+                        omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
+                                     MOD_CONF_CTRL_1);
+                mmc2_conf = *mmc;
+                (void) platform_device_register(&mmc_omap_device2);
+        }
+#endif
+        return;
+}
+#else
+static inline void omap_init_mmc(void) {}
+#endif
+
+#if     defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC)
+
+#define OMAP_RTC_BASE           0xfffb4800
+
+static struct resource rtc_resources[] = {
+        {
+                .start          = OMAP_RTC_BASE,
+                .end            = OMAP_RTC_BASE + 0x5f,
+                .flags          = IORESOURCE_MEM,
+        },
+        {
+                .start          = INT_RTC_TIMER,
+                .flags          = IORESOURCE_IRQ,
+        },
+        {
+                .start          = INT_RTC_ALARM,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device omap_rtc_device = {
+        .name           = "omap_rtc",
+        .id             = -1,
+        .dev = {
+                .release        = omap_nop_release,
+        },
+        .num_resources  = ARRAY_SIZE(rtc_resources),
+        .resource       = rtc_resources,
+};
+
+static void omap_init_rtc(void)
+{
+        (void) platform_device_register(&omap_rtc_device);
+}
+#else
+static inline void omap_init_rtc(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if     defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE)
+
+#define OMAP_WDT_BASE           0xfffeb000
+
+static struct resource wdt_resources[] = {
+        {
+                .start          = OMAP_WDT_BASE,
+                .end            = OMAP_WDT_BASE + 0x4f,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device omap_wdt_device = {
+        .name      = "omap1610_wdt",
+        .id          = -1,
+        .dev = {
+                .release        = omap_nop_release,
+        },
+        .num_resources  = ARRAY_SIZE(wdt_resources),
+        .resource       = wdt_resources,
+};
+
+static void omap_init_wdt(void)
+{
+        (void) platform_device_register(&omap_wdt_device);
+}
+#else
+static inline void omap_init_wdt(void) {}
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * This gets called after board-specific INIT_MACHINE, and initializes most
+ * on-chip peripherals accessible on this board (except for few like USB):
+ *
+ *  (a) Does any "standard config" pin muxing needed.  Board-specific
+ *      code will have muxed GPIO pins and done "nonstandard" setup;
+ *      that code could live in the boot loader.
+ *  (b) Populating board-specific platform_data with the data drivers
+ *      rely on to handle wiring variations.
+ *  (c) Creating platform devices as meaningful on this board and
+ *      with this kernel configuration.
+ *
+ * Claiming GPIOs, and setting their direction and initial values, is the
+ * responsibility of the device drivers.  So is responding to probe().
+ *
+ * Board-specific knowlege like creating devices or pin setup is to be
+ * kept out of drivers as much as possible.  In particular, pin setup
+ * may be handled by the boot loader, and drivers should expect it will
+ * normally have been done by the time they're probed.
+ */
+static int __init omap_init_devices(void)
+{
+        /* please keep these calls, and their implementations above,
+         * in alphabetical order so they're easier to sort through.
+         */
+        omap_init_i2c();
+        omap_init_irda();
+        omap_init_mmc();
+        omap_init_rtc();
+        omap_init_wdt();
+
+        return 0;
+}
+arch_initcall(omap_init_devices);
+
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index c12a78335625..aca2a120813a 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/fpga.c
+ * linux/arch/arm/mach-omap1/fpga.c
  *
  * Interrupt handler for OMAP-1510 Innovator FPGA
  *
@@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void)
          */
         omap_request_gpio(13);
         omap_set_gpio_direction(13, 1);
-        omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE);
+        set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
         set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 207df0fe934d..eb8261d7dead 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -19,6 +19,7 @@
 
 extern int clk_init(void);
 extern void omap_check_revision(void);
+extern void omap_sram_init(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -32,7 +33,6 @@ static struct map_desc omap_io_desc[] __initdata = {
 static struct map_desc omap730_io_desc[] __initdata = {
  { OMAP730_DSP_BASE,    OMAP730_DSP_START,    OMAP730_DSP_SIZE,    MT_DEVICE },
  { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
- { OMAP730_SRAM_BASE,   OMAP730_SRAM_START,   OMAP730_SRAM_SIZE,   MT_DEVICE }
 };
 #endif
 
@@ -40,27 +40,13 @@ static struct map_desc omap730_io_desc[] __initdata = {
 static struct map_desc omap1510_io_desc[] __initdata = {
  { OMAP1510_DSP_BASE,    OMAP1510_DSP_START,    OMAP1510_DSP_SIZE,    MT_DEVICE },
  { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
- { OMAP1510_SRAM_BASE,   OMAP1510_SRAM_START,   OMAP1510_SRAM_SIZE,   MT_DEVICE }
 };
 #endif
 
 #if defined(CONFIG_ARCH_OMAP16XX)
-static struct map_desc omap1610_io_desc[] __initdata = {
+static struct map_desc omap16xx_io_desc[] __initdata = {
  { OMAP16XX_DSP_BASE,    OMAP16XX_DSP_START,    OMAP16XX_DSP_SIZE,    MT_DEVICE },
  { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
- { OMAP16XX_SRAM_BASE,   OMAP16XX_SRAM_START,   OMAP1610_SRAM_SIZE,   MT_DEVICE }
-};
-
-static struct map_desc omap5912_io_desc[] __initdata = {
- { OMAP16XX_DSP_BASE,    OMAP16XX_DSP_START,    OMAP16XX_DSP_SIZE,    MT_DEVICE },
- { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
-/*
- * The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page
- * size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped.
- * Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte
- * can be used.
- */
- { OMAP16XX_SRAM_BASE,   OMAP16XX_SRAM_START,   OMAP5912_SRAM_SIZE + 0x800,   MT_DEVICE }
 };
 #endif
 
@@ -86,14 +72,13 @@ static void __init _omap_map_io(void)
         }
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
-        if (cpu_is_omap1610() || cpu_is_omap1710()) {
-                iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc));
-        }
-        if (cpu_is_omap5912()) {
-                iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc));
+        if (cpu_is_omap16xx()) {
+                iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
         }
 #endif
 
+        omap_sram_init();
+
         /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
          * on a Posted Write in the TIPB Bridge".
          */
@@ -108,8 +93,9 @@ static void __init _omap_map_io(void)
 /*
  * This should only get called from board specific init
  */
-void omap_map_common_io(void)
+void __init omap_map_common_io(void)
 {
         if (!initialized)
                 _omap_map_io();
 }
+
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index afd5d67e4ae7..192ce6055faa 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/irq.c
+ * linux/arch/arm/mach-omap1/irq.c
  *
  * Interrupt handler for all OMAP boards
  *
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index ec0d8285f243..be283cda63dd 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/leds-h2p2-debug.c
+ * linux/arch/arm/mach-omap1/leds-h2p2-debug.c
  *
  * Copyright 2003 by Texas Instruments Incorporated
  *
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
 #include <linux/sched.h>
+#include <linux/version.h>
 
 #include <asm/io.h>
 #include <asm/hardware.h>
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
index 8043b7d0f66e..c8ffd1ddcded 100644
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ b/arch/arm/mach-omap1/leds-innovator.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/leds-innovator.c
+ * linux/arch/arm/mach-omap1/leds-innovator.c
  */
 #include <linux/config.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 4a0e8b9d4fc3..2c8bda847c18 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/leds-osk.c
+ * linux/arch/arm/mach-omap1/leds-osk.c
  *
  * LED driver for OSK, and optionally Mistral QVGA, boards
  */
@@ -64,7 +64,7 @@ static void tps_work(void *unused)
 
 static DECLARE_WORK(work, tps_work, NULL);
 
-#ifdef  CONFIG_FB_OMAP
+#ifdef  CONFIG_OMAP_OSK_MISTRAL
 
 /* For now, all system indicators require the Mistral board, since that
  * LED can be manipulated without a task context.  This LED is either red,
@@ -127,7 +127,7 @@ void osk_leds_event(led_event_t evt)
                 hw_led_state = 0;
                 break;
 
-#ifdef  CONFIG_FB_OMAP
+#ifdef  CONFIG_OMAP_OSK_MISTRAL
 
         case led_timer:
                 hw_led_state ^= TIMER_LED;
@@ -144,7 +144,7 @@ void osk_leds_event(led_event_t evt)
                 mistral_setled();
                 break;
 
-#endif  /* CONFIG_FB_OMAP */
+#endif  /* CONFIG_OMAP_OSK_MISTRAL */
 
         /* "green" == tps LED1 (leftmost, normally power-good)
          * works only with DC adapter, not on battery power!
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 8ab21fe98e1b..5c6b1bb6e722 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/leds.c
+ * linux/arch/arm/mach-omap1/leds.c
  *
  * OMAP LEDs dispatcher
  */
@@ -20,7 +20,9 @@ omap_leds_init(void)
         if (machine_is_omap_innovator())
                 leds_event = innovator_leds_event;
 
-        else if (machine_is_omap_h2() || machine_is_omap_perseus2())
+        else if (machine_is_omap_h2()
+                        || machine_is_omap_h3()
+                        || machine_is_omap_perseus2())
                 leds_event = h2p2_dbg_leds_event;
 
         else if (machine_is_omap_osk())
@@ -30,8 +32,12 @@ omap_leds_init(void)
                 return -1;
 
         if (machine_is_omap_h2()
+                        || machine_is_omap_h3()
                         || machine_is_omap_perseus2()
-                        || machine_is_omap_osk()) {
+#ifdef  CONFIG_OMAP_OSK_MISTRAL
+                        || machine_is_omap_osk()
+#endif
+                        ) {
 
                 /* LED1/LED2 pins can be used as GPIO (as done here), or by
                  * the LPG (works even in deep sleep!), to drive a bicolor
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 214e5d17c8b5..40c4f7c40e73 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -24,7 +24,11 @@
 
 #include <asm/arch/board.h>
 #include <asm/arch/mux.h>
+#include <asm/arch/gpio.h>
 #include <asm/arch/fpga.h>
+#ifdef CONFIG_PM
+#include <asm/arch/pm.h>
+#endif
 
 static struct clk * uart1_ck = NULL;
 static struct clk * uart2_ck = NULL;
@@ -94,7 +98,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device serial_device = {
         .name                   = "serial8250",
-        .id                     = 0,
+        .id                     = PLAT8250_DEV_PLATFORM,
         .dev                    = {
                 .platform_data  = serial_platform_data,
         },
@@ -193,6 +197,86 @@ void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
         }
 }
 
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+
+static irqreturn_t omap_serial_wake_interrupt(int irq, void *dev_id,
+                                              struct pt_regs *regs)
+{
+        /* Need to do something with serial port right after wake-up? */
+        return IRQ_HANDLED;
+}
+
+/*
+ * Reroutes serial RX lines to GPIO lines for the duration of
+ * sleep to allow waking up the device from serial port even
+ * in deep sleep.
+ */
+void omap_serial_wake_trigger(int enable)
+{
+        if (!cpu_is_omap16xx())
+                return;
+
+        if (uart1_ck != NULL) {
+                if (enable)
+                        omap_cfg_reg(V14_16XX_GPIO37);
+                else
+                        omap_cfg_reg(V14_16XX_UART1_RX);
+        }
+        if (uart2_ck != NULL) {
+                if (enable)
+                        omap_cfg_reg(R9_16XX_GPIO18);
+                else
+                        omap_cfg_reg(R9_16XX_UART2_RX);
+        }
+        if (uart3_ck != NULL) {
+                if (enable)
+                        omap_cfg_reg(L14_16XX_GPIO49);
+                else
+                        omap_cfg_reg(L14_16XX_UART3_RX);
+        }
+}
+
+static void __init omap_serial_set_port_wakeup(int gpio_nr)
+{
+        int ret;
+
+        ret = omap_request_gpio(gpio_nr);
+        if (ret < 0) {
+                printk(KERN_ERR "Could not request UART wake GPIO: %i\n",
+                       gpio_nr);
+                return;
+        }
+        omap_set_gpio_direction(gpio_nr, 1);
+        set_irq_type(OMAP_GPIO_IRQ(gpio_nr), IRQT_RISING);
+        ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt,
+                          0, "serial wakeup", NULL);
+        if (ret) {
+                omap_free_gpio(gpio_nr);
+                printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
+                       gpio_nr);
+                return;
+        }
+        enable_irq_wake(OMAP_GPIO_IRQ(gpio_nr));
+}
+
+static int __init omap_serial_wakeup_init(void)
+{
+        if (!cpu_is_omap16xx())
+                return 0;
+
+        if (uart1_ck != NULL)
+                omap_serial_set_port_wakeup(37);
+        if (uart2_ck != NULL)
+                omap_serial_set_port_wakeup(18);
+        if (uart3_ck != NULL)
+                omap_serial_set_port_wakeup(49);
+
+        return 0;
+}
+late_initcall(omap_serial_wakeup_init);
+
+#endif  /* CONFIG_OMAP_SERIAL_WAKE */
+
 static int __init omap_init(void)
 {
         return platform_device_register(&serial_device);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index d540539c9bbb..191a9b1ee9b7 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -247,13 +247,6 @@ unsigned long long sched_clock(void)
 #define OMAP_32K_TIMER_TCR              0x04
 
 #define OMAP_32K_TICKS_PER_HZ           (32768 / HZ)
-#if (32768 % HZ) != 0
-/* We cannot ignore modulo.
- * Potential error can be as high as several percent.
- */
-#define OMAP_32K_TICK_MODULO            (32768 % HZ)
-static unsigned modulo_count = 0; /* Counts 1/HZ units */
-#endif
 
 /*
  * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
@@ -296,13 +289,22 @@ static inline void omap_32k_timer_stop(void)
 }
 
 /*
- * Rounds down to nearest usec
+ * Rounds down to nearest usec. Note that this will overflow for larger values.
  */
 static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k)
 {
         return (ticks_32k * 5*5*5*5*5*5) >> 9;
 }
 
+/*
+ * Rounds down to nearest nsec.
+ */
+static inline unsigned long long
+omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
+{
+        return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9;
+}
+
 static unsigned long omap_32k_last_tick = 0;
 
 /*
@@ -315,6 +317,15 @@ static unsigned long omap_32k_timer_gettimeoffset(void)
 }
 
 /*
+ * Returns current time from boot in nsecs. It's OK for this to wrap
+ * around for now, as it's just a relative time stamp.
+ */
+unsigned long long sched_clock(void)
+{
+        return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read());
+}
+
+/*
  * Timer interrupt for 32KHz timer. When dynamic tick is enabled, this
  * function is also called from other interrupts to remove latency
  * issues with dynamic tick. In the dynamic tick case, we need to lock
@@ -330,19 +341,6 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
         now = omap_32k_sync_timer_read();
 
         while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) {
-#ifdef OMAP_32K_TICK_MODULO
-                /* Modulo addition may put omap_32k_last_tick ahead of now
-                 * and cause unwanted repetition of the while loop.
-                 */
-                if (unlikely(now - omap_32k_last_tick == ~0))
-                        break;
-
-                modulo_count += OMAP_32K_TICK_MODULO;
-                if (modulo_count > HZ) {
-                        ++omap_32k_last_tick;
-                        modulo_count -= HZ;
-                }
-#endif
                 omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
                 timer_tick(regs);
         }
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 29185acdd9e1..07b5dd453565 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -131,27 +131,12 @@ static struct platform_device corgits_device = {
 /*
  * MMC/SD Device
  *
- * The card detect interrupt isn't debounced so we delay it by HZ/4
+ * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static struct mmc_detect {
-        struct timer_list detect_timer;
-        void *devid;
-} mmc_detect;
+static struct pxamci_platform_data corgi_mci_platform_data;
 
-static void mmc_detect_callback(unsigned long data)
-{
-        mmc_detect_change(mmc_detect.devid);
-}
-
-static irqreturn_t corgi_mmc_detect_int(int irq, void *devid, struct pt_regs *regs)
-{
-        mmc_detect.devid=devid;
-        mod_timer(&mmc_detect.detect_timer, jiffies + HZ/4);
-        return IRQ_HANDLED;
-}
-
-static int corgi_mci_init(struct device *dev, irqreturn_t (*unused_detect_int)(int, void *, struct pt_regs *), void *data)
+static int corgi_mci_init(struct device *dev, irqreturn_t (*corgi_detect_int)(int, void *, struct pt_regs *), void *data)
 {
         int err;
 
@@ -161,11 +146,9 @@ static int corgi_mci_init(struct device *dev, irqreturn_t (*unused_detect_int)(i
         pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN);
         pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT);
 
-        init_timer(&mmc_detect.detect_timer);
-        mmc_detect.detect_timer.function = mmc_detect_callback;
-        mmc_detect.detect_timer.data = (unsigned long) &mmc_detect;
+        corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
-        err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_mmc_detect_int, SA_INTERRUPT,
+        err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int, SA_INTERRUPT,
                              "MMC card detect", data);
         if (err) {
                 printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
@@ -198,7 +181,6 @@ static int corgi_mci_get_ro(struct device *dev)
 static void corgi_mci_exit(struct device *dev, void *data)
 {
         free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
-        del_timer(&mmc_detect.detect_timer);
 }
 
 static struct pxamci_platform_data corgi_mci_platform_data = {
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 8ccffba0018f..366a9bde3d8b 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -22,7 +22,7 @@
 #include <asm/arch/corgi.h>
 #include <asm/arch/pxa-regs.h>
 
-static spinlock_t corgi_ssp_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(corgi_ssp_lock);
 static struct ssp_dev corgi_ssp_dev;
 static struct ssp_state corgi_ssp_state;
 
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index a10268618f74..e3587efec4bf 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -140,7 +140,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device serial_device = {
         .name                   = "serial8250",
-        .id                     = 0,
+        .id                     = PLAT8250_DEV_PLATFORM,
         .dev                    = {
                 .platform_data  = serial_platform_data,
         },
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index 4664bd11adc1..0077937a7ab8 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -29,7 +29,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
-
+#include <asm/arch/fb.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -103,6 +103,15 @@ struct platform_device s3c_device_lcd = {
 
 EXPORT_SYMBOL(s3c_device_lcd);
 
+static struct s3c2410fb_mach_info s3c2410fb_info;
+
+void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info)
+{
+        memcpy(&s3c2410fb_info,hard_s3c2410fb_info,sizeof(struct s3c2410fb_mach_info));
+        s3c_device_lcd.dev.platform_data = &s3c2410fb_info;
+}
+EXPORT_SYMBOL(set_s3c2410fb_info);
+
 /* NAND Controller */
 
 static struct resource s3c_nand_resource[] = {
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index e9182242da95..1a3367da6408 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -381,7 +381,7 @@ static struct plat_serial8250_port bast_sio_data[] = {
 
 static struct platform_device bast_sio = {
         .name                   = "serial8250",
-        .id                     = 0,
+        .id                     = PLAT8250_DEV_PLATFORM,
         .dev                    = {
                 .platform_data  = &bast_sio_data,
         },
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index ea4fb1a97a50..6ff1889fbd21 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -45,6 +45,9 @@
 
 //#include <asm/debug-ll.h>
 #include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/fb.h>
 
 #include <linux/serial_core.h>
 
@@ -88,6 +91,48 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] = {
 
 
 
+/**
+ * Set lcd on or off
+ **/
+static struct s3c2410fb_mach_info h1940_lcdcfg __initdata = {
+        .fixed_syncs=           1,
+        .regs={
+                .lcdcon1=       S3C2410_LCDCON1_TFT16BPP | \
+                                S3C2410_LCDCON1_TFT | \
+                                S3C2410_LCDCON1_CLKVAL(0x0C),
+
+                .lcdcon2=       S3C2410_LCDCON2_VBPD(7) | \
+                                S3C2410_LCDCON2_LINEVAL(319) | \
+                                S3C2410_LCDCON2_VFPD(6) | \
+                                S3C2410_LCDCON2_VSPW(0),
+
+                .lcdcon3=       S3C2410_LCDCON3_HBPD(19) | \
+                                S3C2410_LCDCON3_HOZVAL(239) | \
+                                S3C2410_LCDCON3_HFPD(7),
+
+                .lcdcon4=       S3C2410_LCDCON4_MVAL(0) | \
+                                S3C2410_LCDCON4_HSPW(3),
+
+                .lcdcon5=       S3C2410_LCDCON5_FRM565 | \
+                                S3C2410_LCDCON5_INVVLINE | \
+                                S3C2410_LCDCON5_HWSWP,
+        },
+        .lpcsel=        0x02,
+        .gpccon=        0xaa940659,
+        .gpccon_mask=   0xffffffff,
+        .gpcup=         0x0000ffff,
+        .gpcup_mask=    0xffffffff,
+        .gpdcon=        0xaa84aaa0,
+        .gpdcon_mask=   0xffffffff,
+        .gpdup=         0x0000faff,
+        .gpdup_mask=    0xffffffff,
+
+        .width=         240,
+        .height=        320,
+        .xres=          {240,240,240},
+        .yres=          {320,320,320},
+        .bpp=           {16,16,16},
+};
 
 static struct platform_device *h1940_devices[] __initdata = {
         &s3c_device_usb,
@@ -116,6 +161,11 @@ void __init h1940_init_irq(void)
 
 }
 
+void __init h1940_init(void)
+{
+        set_s3c2410fb_info(&h1940_lcdcfg);
+}
+
 MACHINE_START(H1940, "IPAQ-H1940")
         /* Maintainer: Ben Dooks <ben@fluff.org> */
         .phys_ram       = S3C2410_SDRAM_PA,
@@ -124,5 +174,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
         .boot_params    = S3C2410_SDRAM_PA + 0x100,
         .map_io         = h1940_map_io,
         .init_irq       = h1940_init_irq,
+        .init_machine   = h1940_init,
         .timer          = &s3c24xx_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 924e8464c212..8f9ab2893df4 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -221,7 +221,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device serial_device = {
         .name                   = "serial8250",
-        .id                     = 0,
+        .id                     = PLAT8250_DEV_PLATFORM,
         .dev                    = {
                 .platform_data  = serial_platform_data,
         },
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index e737eae4521f..946c0d11c73b 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -41,7 +41,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device serial_device = {
         .name                   = "serial8250",
-        .id                     = 0,
+        .id                     = PLAT8250_DEV_PLATFORM,
         .dev                    = {
                 .platform_data  = serial_platform_data,
         },
diff --git a/arch/arm/mm/copypage-v3.S b/arch/arm/mm/copypage-v3.S
index 4940f1908316..3c58ebbf0359 100644
--- a/arch/arm/mm/copypage-v3.S
+++ b/arch/arm/mm/copypage-v3.S
@@ -12,7 +12,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 
                 .text
                 .align  5
diff --git a/arch/arm/mm/copypage-v4wb.S b/arch/arm/mm/copypage-v4wb.S
index b94c345ceb94..83117354b1cd 100644
--- a/arch/arm/mm/copypage-v4wb.S
+++ b/arch/arm/mm/copypage-v4wb.S
@@ -11,7 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 
         .text
         .align  5
diff --git a/arch/arm/mm/copypage-v4wt.S b/arch/arm/mm/copypage-v4wt.S
index 976793937a93..e1f2af28d549 100644
--- a/arch/arm/mm/copypage-v4wt.S
+++ b/arch/arm/mm/copypage-v4wt.S
@@ -14,7 +14,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 
         .text
         .align  5
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 191788fb18d1..b0208c992576 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -16,6 +16,58 @@
 #include <asm/tlbflush.h>
 
 #ifdef CONFIG_CPU_CACHE_VIPT
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+        if (cache_is_vivt()) {
+                if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+                        __cpuc_flush_user_all();
+                return;
+        }
+
+        if (cache_is_vipt_aliasing()) {
+                asm(    "mcr    p15, 0, %0, c7, c14, 0\n"
+                "       mcr     p15, 0, %0, c7, c5, 0\n"
+                "       mcr     p15, 0, %0, c7, c10, 4"
+                    :
+                    : "r" (0)
+                    : "cc");
+        }
+}
+
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+{
+        if (cache_is_vivt()) {
+                if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+                        __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
+                                                vma->vm_flags);
+                return;
+        }
+
+        if (cache_is_vipt_aliasing()) {
+                asm(    "mcr    p15, 0, %0, c7, c14, 0\n"
+                "       mcr     p15, 0, %0, c7, c5, 0\n"
+                "       mcr     p15, 0, %0, c7, c10, 4"
+                    :
+                    : "r" (0)
+                    : "cc");
+        }
+}
+
+void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+{
+        if (cache_is_vivt()) {
+                if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+                        unsigned long addr = user_addr & PAGE_MASK;
+                        __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
+                }
+                return;
+        }
+
+        if (cache_is_vipt_aliasing())
+                flush_pfn_alias(pfn, user_addr);
+}
+
 #define ALIAS_FLUSH_START       0xffff4000
 
 #define TOP_PTE(x)      pte_offset_kernel(top_pmd, x)
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 5c0ae5260d1c..1d739d282a45 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -28,7 +28,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index d69389c4d4ba..9b725665b5c7 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -28,7 +28,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 747ed963e1df..37b70fa21c76 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -17,7 +17,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 248110c9cf13..931b690d1be2 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -17,7 +17,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 189ef6a71ba1..d0f1bbb48f6c 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -13,7 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 57cfa6a2f54f..c69c9de32391 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -33,7 +33,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 9137fe563599..7cfc2604a1ee 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -4,7 +4,7 @@
  *  VMA_VM_FLAGS
  *  VM_EXEC
  */
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 
 /*
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 360cae905692..34f7e7d3f419 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -15,7 +15,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/procinfo.h>
 #include <asm/hardware.h>
 #include <asm/pgtable.h>
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index d447cd5f3dd9..ca14f80d5ab4 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -20,7 +20,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/procinfo.h>
 #include <asm/hardware.h>
 #include <asm/pgtable.h>
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 139a38670c5d..eb34823c9dbf 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -11,7 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/procinfo.h>
 #include <asm/pgtable.h>
 
diff --git a/arch/arm/mm/tlb-v3.S b/arch/arm/mm/tlb-v3.S
index 44b0daeaff9b..c10786ec8e0a 100644
--- a/arch/arm/mm/tlb-v3.S
+++ b/arch/arm/mm/tlb-v3.S
@@ -13,7 +13,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/tlbflush.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/tlb-v4.S b/arch/arm/mm/tlb-v4.S
index db82ee468248..d6c94457c2b9 100644
--- a/arch/arm/mm/tlb-v4.S
+++ b/arch/arm/mm/tlb-v4.S
@@ -14,7 +14,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/tlbflush.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/tlb-v4wb.S b/arch/arm/mm/tlb-v4wb.S
index 7908d5f1f130..cb829ca7845d 100644
--- a/arch/arm/mm/tlb-v4wb.S
+++ b/arch/arm/mm/tlb-v4wb.S
@@ -14,7 +14,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/tlbflush.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/tlb-v4wbi.S b/arch/arm/mm/tlb-v4wbi.S
index efbe94bbe1a7..60cfc4a25dd5 100644
--- a/arch/arm/mm/tlb-v4wbi.S
+++ b/arch/arm/mm/tlb-v4wbi.S
@@ -14,7 +14,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/tlbflush.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S
index 99ed26e78adf..6f76b89ef46e 100644
--- a/arch/arm/mm/tlb-v6.S
+++ b/arch/arm/mm/tlb-v6.S
@@ -11,7 +11,7 @@
  *  These assume a split I/D TLB.
  */
 #include <linux/linkage.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/page.h>
 #include <asm/tlbflush.h>
 #include "proc-macros.S"
diff --git a/arch/arm/nwfpe/entry26.S b/arch/arm/nwfpe/entry26.S
index 0ed38b0913db..51940a96d6a6 100644
--- a/arch/arm/nwfpe/entry26.S
+++ b/arch/arm/nwfpe/entry26.S
@@ -20,7 +20,7 @@
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 
 /* This is the kernel's entry point into the floating point emulator.
 It is called from the kernel with code similar to this:
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index e73c8deca592..6f17187ab32a 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -17,7 +17,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
 #include <asm/vfpmacros.h>
 
         .globl  do_vfp