Merge branches 'imx/pata' and 'imx/sata' into next/driver

Conflicts:
	arch/arm/mach-mx5/clock-mx51-mx53.c
	arch/arm/mach-mx5/devices-imx53.h

46 files changed, 519 insertions, 214 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2c71a8f3535a..5ebc5d922ea1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -195,8 +195,7 @@ config VECTORS_BASE
           The base address of exception vectors.
 
 config ARM_PATCH_PHYS_VIRT
-        bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)"
-        depends on EXPERIMENTAL
+        bool "Patch physical to virtual translations at runtime"
         depends on !XIP_KERNEL && MMU
         depends on !ARCH_REALVIEW || !SPARSEMEM
         help
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index 7fa3bb0d2397..a08783823b32 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -195,10 +195,10 @@ ENTRY(iwmmxt_task_disable)
 
         @ enable access to CP0 and CP1
         XSC(mrc p15, 0, r4, c15, c1, 0)
-        XSC(orr r4, r4, #0xf)
+        XSC(orr r4, r4, #0x3)
         XSC(mcr p15, 0, r4, c15, c1, 0)
         PJ4(mrc p15, 0, r4, c1, c0, 2)
-        PJ4(orr r4, r4, #0x3)
+        PJ4(orr r4, r4, #0xf)
         PJ4(mcr p15, 0, r4, c1, c0, 2)
 
         mov     r0, #0                          @ nothing to load
@@ -313,7 +313,7 @@ ENTRY(iwmmxt_task_switch)
         teq     r2, r3                          @ next task owns it?
         movne   pc, lr                          @ no: leave Concan disabled
 
-1:      @ flip Conan access
+1:      @ flip Concan access
         XSC(eor r1, r1, #0x3)
         XSC(mcr p15, 0, r1, c15, c1, 0)
         PJ4(eor r1, r1, #0xf)
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 05b377616fd5..cc2020c2c709 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -323,7 +323,11 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 #endif
         s = find_mod_section(hdr, sechdrs, ".alt.smp.init");
         if (s && !is_smp())
+#ifdef CONFIG_SMP_ON_UP
                 fixup_smp((void *)s->sh_addr, s->sh_size);
+#else
+                return -EINVAL;
+#endif
         return 0;
 }
 
diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
index 0fc7ba56d616..e63e23504fe5 100644
--- a/arch/arm/mach-imx/clock-imx25.c
+++ b/arch/arm/mach-imx/clock-imx25.c
@@ -331,6 +331,9 @@ int __init mx25_clocks_init(void)
         __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
                         CRM_BASE + 0x64);
 
+        /* Clock source for gpt is ahb_div */
+        __raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
+
         mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
         return 0;
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 6707de0ab716..6778f8193bc6 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -30,6 +30,7 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <sound/tlv320aic32x4.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -196,6 +197,17 @@ static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
         .invert = 0,
 };
 
+static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = {
+        .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN |
+                     AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE |
+                     AIC32X4_PWR_AIC32X4_LDO_ENABLE |
+                     AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 |
+                     AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED,
+        .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K |
+                         AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K,
+        .swapdacs = false,
+};
+
 static struct i2c_board_info visstrim_m10_i2c_devices[] = {
         {
                 I2C_BOARD_INFO("pca9555", 0x20),
@@ -203,6 +215,7 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
         },
         {
                 I2C_BOARD_INFO("tlv320aic32x4", 0x18),
+                .platform_data = &visstrim_m10_aic32x4_pdata,
         }
 };
 
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 0ce49478a479..29ca8907a780 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -468,7 +468,7 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
 #endif
 };
 
-static void mxc_init_i2c(void)
+static void __init mxc_init_i2c(void)
 {
         i2c_register_board_info(1, mx31ads_i2c1_devices,
                                 ARRAY_SIZE(mx31ads_i2c1_devices));
@@ -486,7 +486,7 @@ static unsigned int ssi_pins[] = {
         MX31_PIN_STXD5__STXD5,
 };
 
-static void mxc_init_audio(void)
+static void __init mxc_init_audio(void)
 {
         imx31_add_imx_ssi(0, NULL);
         mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 750368ddf0f9..126913ad106a 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -192,7 +192,7 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
         .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 };
 
-static void lilly1131_usb_init(void)
+static void __init lilly1131_usb_init(void)
 {
         imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
 
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index c070c24255f4..98e25d9aaab6 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -16,16 +16,18 @@
 #include <mach/gpio.h>
 #include <mach/pxa168.h>
 #include <mach/mfp-pxa168.h>
-#include <mach/mfp-gplugd.h>
 
 #include "common.h"
 
 static unsigned long gplugd_pin_config[] __initdata = {
         /* UART3 */
-        GPIO8_UART3_SOUT,
-        GPIO9_UART3_SIN,
-        GPI1O_UART3_CTS,
-        GPI11_UART3_RTS,
+        GPIO8_UART3_TXD,
+        GPIO9_UART3_RXD,
+        GPIO1O_UART3_CTS,
+        GPIO11_UART3_RTS,
+
+        /* USB OTG PEN */
+        GPIO18_GPIO,
 
         /* MMC2 */
         GPIO28_MMC2_CMD,
@@ -109,6 +111,12 @@ static unsigned long gplugd_pin_config[] __initdata = {
         GPIO105_CI2C_SDA,
         GPIO106_CI2C_SCL,
 
+        /* SPI NOR Flash on SSP2 */
+        GPIO107_SSP2_RXD,
+        GPIO108_SSP2_TXD,
+        GPIO110_GPIO,     /* SPI_CSn */
+        GPIO111_SSP2_CLK,
+
         /* Select JTAG */
         GPIO109_GPIO,
 
@@ -154,7 +162,7 @@ static void __init select_disp_freq(void)
                                 "frequency\n");
         } else {
                 gpio_direction_output(35, 1);
-                gpio_free(104);
+                gpio_free(35);
         }
 
         if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
@@ -162,7 +170,7 @@ static void __init select_disp_freq(void)
                                 "frequency\n");
         } else {
                 gpio_direction_output(85, 0);
-                gpio_free(104);
+                gpio_free(85);
         }
 }
 
diff --git a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h b/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
deleted file mode 100644
index b8cf38d85600..000000000000
--- a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
- *
- *   MFP definitions used in gplugD
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MFP_GPLUGD_H
-#define __MACH_MFP_GPLUGD_H
-
-#include <plat/mfp.h>
-#include <mach/mfp.h>
-
-/* UART3 */
-#define GPIO8_UART3_SOUT       MFP_CFG(GPIO8, AF2)
-#define GPIO9_UART3_SIN        MFP_CFG(GPIO9, AF2)
-#define GPI1O_UART3_CTS        MFP_CFG(GPIO10, AF2)
-#define GPI11_UART3_RTS        MFP_CFG(GPIO11, AF2)
-
-/* MMC2 */
-#define GPIO28_MMC2_CMD         MFP_CFG_DRV(GPIO28, AF6, FAST)
-#define GPIO29_MMC2_CLK         MFP_CFG_DRV(GPIO29, AF6, FAST)
-#define GPIO30_MMC2_DAT0        MFP_CFG_DRV(GPIO30, AF6, FAST)
-#define GPIO31_MMC2_DAT1        MFP_CFG_DRV(GPIO31, AF6, FAST)
-#define GPIO32_MMC2_DAT2        MFP_CFG_DRV(GPIO32, AF6, FAST)
-#define GPIO33_MMC2_DAT3        MFP_CFG_DRV(GPIO33, AF6, FAST)
-
-/* I2S */
-#undef GPIO114_I2S_FRM
-#undef GPIO115_I2S_BCLK
-
-#define GPIO114_I2S_FRM         MFP_CFG_DRV(GPIO114, AF1, FAST)
-#define GPIO115_I2S_BCLK        MFP_CFG_DRV(GPIO115, AF1, FAST)
-#define GPIO116_I2S_TXD         MFP_CFG_DRV(GPIO116, AF1, FAST)
-
-/* MMC4 */
-#define GPIO125_MMC4_DAT3       MFP_CFG_DRV(GPIO125, AF7, FAST)
-#define GPIO126_MMC4_DAT2       MFP_CFG_DRV(GPIO126, AF7, FAST)
-#define GPIO127_MMC4_DAT1       MFP_CFG_DRV(GPIO127, AF7, FAST)
-#define GPIO0_2_MMC4_DAT0       MFP_CFG_DRV(GPIO0_2, AF7, FAST)
-#define GPIO1_2_MMC4_CMD        MFP_CFG_DRV(GPIO1_2, AF7, FAST)
-#define GPIO2_2_MMC4_CLK        MFP_CFG_DRV(GPIO2_2, AF7, FAST)
-
-/* OTG GPIO */
-#define GPIO_USB_OTG_PEN        18
-#define GPIO_USB_OIDIR          20
-
-/* Other GPIOs are 35, 84, 85 */
-#endif /* __MACH_MFP_GPLUGD_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 8c782328b21c..92aaa3c19d61 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -203,6 +203,10 @@
 #define GPIO33_CF_nCD2          MFP_CFG(GPIO33, AF3)
 
 /* UART */
+#define GPIO8_UART3_TXD         MFP_CFG(GPIO8, AF2)
+#define GPIO9_UART3_RXD         MFP_CFG(GPIO9, AF2)
+#define GPIO1O_UART3_CTS        MFP_CFG(GPIO10, AF2)
+#define GPIO11_UART3_RTS        MFP_CFG(GPIO11, AF2)
 #define GPIO88_UART2_TXD        MFP_CFG(GPIO88, AF2)
 #define GPIO89_UART2_RXD        MFP_CFG(GPIO89, AF2)
 #define GPIO107_UART1_TXD       MFP_CFG_DRV(GPIO107, AF1, FAST)
@@ -232,6 +236,22 @@
 #define GPIO53_MMC1_CD          MFP_CFG(GPIO53, AF1)
 #define GPIO46_MMC1_WP          MFP_CFG(GPIO46, AF1)
 
+/* MMC2 */
+#define GPIO28_MMC2_CMD         MFP_CFG_DRV(GPIO28, AF6, FAST)
+#define GPIO29_MMC2_CLK         MFP_CFG_DRV(GPIO29, AF6, FAST)
+#define GPIO30_MMC2_DAT0        MFP_CFG_DRV(GPIO30, AF6, FAST)
+#define GPIO31_MMC2_DAT1        MFP_CFG_DRV(GPIO31, AF6, FAST)
+#define GPIO32_MMC2_DAT2        MFP_CFG_DRV(GPIO32, AF6, FAST)
+#define GPIO33_MMC2_DAT3        MFP_CFG_DRV(GPIO33, AF6, FAST)
+
+/* MMC4 */
+#define GPIO125_MMC4_DAT3       MFP_CFG_DRV(GPIO125, AF7, FAST)
+#define GPIO126_MMC4_DAT2       MFP_CFG_DRV(GPIO126, AF7, FAST)
+#define GPIO127_MMC4_DAT1       MFP_CFG_DRV(GPIO127, AF7, FAST)
+#define GPIO0_2_MMC4_DAT0       MFP_CFG_DRV(GPIO0_2, AF7, FAST)
+#define GPIO1_2_MMC4_CMD        MFP_CFG_DRV(GPIO1_2, AF7, FAST)
+#define GPIO2_2_MMC4_CLK        MFP_CFG_DRV(GPIO2_2, AF7, FAST)
+
 /* LCD */
 #define GPIO84_LCD_CS           MFP_CFG(GPIO84, AF1)
 #define GPIO60_LCD_DD0          MFP_CFG(GPIO60, AF1)
@@ -269,11 +289,12 @@
 #define GPIO106_CI2C_SCL        MFP_CFG(GPIO106, AF1)
 
 /* I2S */
-#define GPIO113_I2S_MCLK        MFP_CFG(GPIO113,AF6)
-#define GPIO114_I2S_FRM         MFP_CFG(GPIO114,AF1)
-#define GPIO115_I2S_BCLK        MFP_CFG(GPIO115,AF1)
-#define GPIO116_I2S_RXD         MFP_CFG(GPIO116,AF2)
-#define GPIO117_I2S_TXD         MFP_CFG(GPIO117,AF2)
+#define GPIO113_I2S_MCLK        MFP_CFG(GPIO113, AF6)
+#define GPIO114_I2S_FRM         MFP_CFG(GPIO114, AF1)
+#define GPIO115_I2S_BCLK        MFP_CFG(GPIO115, AF1)
+#define GPIO116_I2S_RXD         MFP_CFG(GPIO116, AF2)
+#define GPIO116_I2S_TXD         MFP_CFG(GPIO116, AF1)
+#define GPIO117_I2S_TXD         MFP_CFG(GPIO117, AF2)
 
 /* PWM */
 #define GPIO96_PWM3_OUT         MFP_CFG(GPIO96, AF1)
@@ -324,4 +345,10 @@
 #define GPIO101_MII_MDIO        MFP_CFG(GPIO101, AF5)
 #define GPIO103_RX_DV           MFP_CFG(GPIO103, AF5)
 
+/* SSP2 */
+#define GPIO107_SSP2_RXD        MFP_CFG(GPIO107, AF4)
+#define GPIO108_SSP2_TXD        MFP_CFG(GPIO108, AF4)
+#define GPIO111_SSP2_CLK        MFP_CFG(GPIO111, AF4)
+#define GPIO112_SSP2_FRM        MFP_CFG(GPIO112, AF4)
+
 #endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 99833b9485cf..4e91ee6e27c8 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -51,12 +51,12 @@ static inline uint32_t timer_read(void)
 {
         int delay = 100;
 
-        __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0));
+        __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1));
 
         while (delay--)
                 cpu_relax();
 
-        return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
+        return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1));
 }
 
 unsigned long long notrace sched_clock(void)
@@ -75,28 +75,51 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
         struct clock_event_device *c = dev_id;
 
-        /* disable and clear pending interrupt status */
-        __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
-        __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0));
+        /*
+         * Clear pending interrupt status.
+         */
+        __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+
+        /*
+         * Disable timer 0.
+         */
+        __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+
         c->event_handler(c);
+
         return IRQ_HANDLED;
 }
 
 static int timer_set_next_event(unsigned long delta,
                                 struct clock_event_device *dev)
 {
-        unsigned long flags, next;
+        unsigned long flags;
 
         local_irq_save(flags);
 
-        /* clear pending interrupt status and enable */
+        /*
+         * Disable timer 0.
+         */
+        __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+
+        /*
+         * Clear and enable timer match 0 interrupt.
+         */
         __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
         __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
 
-        next = timer_read() + delta;
-        __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+        /*
+         * Setup new clockevent timer value.
+         */
+        __raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+
+        /*
+         * Enable timer 0.
+         */
+        __raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER);
 
         local_irq_restore(flags);
+
         return 0;
 }
 
@@ -145,23 +168,26 @@ static struct clocksource cksrc = {
 static void __init timer_config(void)
 {
         uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
-        uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER);
-        uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR);
 
-        __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+        __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */
 
-        ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3);
+        ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
+                (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
         __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
 
-        /* free-running mode */
-        __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR);
+        /* set timer 0 to periodic mode, and timer 1 to free-running mode */
+        __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR);
 
-        __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */
+        __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */
         __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0));  /* clear status */
         __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
 
-        /* enable timer counter */
-        __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER);
+        __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */
+        __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1));  /* clear status */
+        __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1));
+
+        /* enable timer 1 counter */
+        __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER);
 }
 
 static struct irqaction timer_irq = {
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 7c893fa70266..68934ea8725a 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
                 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
         }, {
                 .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-                .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
+                .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
                 .irqflags = IRQF_TRIGGER_HIGH,
                 .uartclk = CPUIMX51_QUART_XTAL,
                 .regshift = CPUIMX51_QUART_REGSHIFT,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index e400b09109ce..11b0ff67f89d 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -369,7 +369,7 @@ static void __init mx51_babbage_init(void)
                                         ARRAY_SIZE(mx51babbage_pads));
 
         imx51_add_imx_uart(0, &uart_pdata);
-        imx51_add_imx_uart(1, &uart_pdata);
+        imx51_add_imx_uart(1, NULL);
         imx51_add_imx_uart(2, &uart_pdata);
 
         babbage_fec_reset();
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index f70700dc0ec1..551daf85ff8c 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -108,9 +108,9 @@ static void __init mx51_efikamx_board_id(void)
         gpio_request(EFIKAMX_PCBID2, "pcbid2");
         gpio_direction_input(EFIKAMX_PCBID2);
 
-        id = gpio_get_value(EFIKAMX_PCBID0);
-        id |= gpio_get_value(EFIKAMX_PCBID1) << 1;
-        id |= gpio_get_value(EFIKAMX_PCBID2) << 2;
+        id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
+        id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
+        id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
 
         switch (id) {
         case 7:
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 2e4d9d32a87c..8a9bca22beb5 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -156,23 +156,24 @@ static struct gpio_keys_button mx51_efikasb_keys[] = {
         {
                 .code = KEY_POWER,
                 .gpio = EFIKASB_PWRKEY,
-                .type = EV_PWR,
+                .type = EV_KEY,
                 .desc = "Power Button",
                 .wakeup = 1,
-                .debounce_interval = 10, /* ms */
+                .active_low = 1,
         },
         {
                 .code = SW_LID,
                 .gpio = EFIKASB_LID,
                 .type = EV_SW,
                 .desc = "Lid Switch",
+                .active_low = 1,
         },
         {
-                /* SW_RFKILLALL vs KEY_RFKILL ? */
-                .code = SW_RFKILL_ALL,
+                .code = KEY_RFKILL,
                 .gpio = EFIKASB_RFKILL,
-                .type = EV_SW,
+                .type = EV_KEY,
                 .desc = "rfkill",
+                .active_low = 1,
         },
 };
 
@@ -224,8 +225,8 @@ static void __init mx51_efikasb_board_id(void)
         gpio_request(EFIKASB_PCBID1, "pcb id1");
         gpio_direction_input(EFIKASB_PCBID1);
 
-        id = gpio_get_value(EFIKASB_PCBID0);
-        id |= gpio_get_value(EFIKASB_PCBID1) << 1;
+        id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
+        id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
 
         switch (id) {
         default:
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 76a67c4a2a0b..ef2039eff74c 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -234,6 +234,7 @@ static void __init mx53_ard_board_init(void)
         imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
         imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
         imx_add_gpio_keys(&ard_button_data);
+        imx53_add_ahci_imx();
 }
 
 static void __init mx53_ard_timer_init(void)
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 4e1d51d252dc..940aac932fa3 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -273,6 +273,7 @@ static void __init mx53_loco_board_init(void)
         imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
         imx_add_gpio_keys(&loco_button_data);
         gpio_led_register_device(-1, &mx53loco_leds_data);
+        imx53_add_ahci_imx();
 }
 
 static void __init mx53_loco_timer_init(void)
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index bc02894eafef..efcab68840ae 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -35,6 +35,7 @@
 #include "devices-imx53.h"
 
 #define SMD_FEC_PHY_RST         IMX_GPIO_NR(7, 6)
+#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
 
 static iomux_v3_cfg_t mx53_smd_pads[] = {
         MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
@@ -111,6 +112,19 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
         .bitrate = 100000,
 };
 
+static inline void mx53_smd_ahci_pwr_on(void)
+{
+        int ret;
+
+        /* Enable SATA PWR */
+        ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
+                        GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
+        if (ret) {
+                pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
+                return;
+        }
+}
+
 static void __init mx53_smd_board_init(void)
 {
         imx53_soc_init();
@@ -125,6 +139,8 @@ static void __init mx53_smd_board_init(void)
         imx53_add_sdhci_esdhc_imx(0, NULL);
         imx53_add_sdhci_esdhc_imx(1, NULL);
         imx53_add_sdhci_esdhc_imx(2, NULL);
+        mx53_smd_ahci_pwr_on();
+        imx53_add_ahci_imx();
 }
 
 static void __init mx53_smd_timer_init(void)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 3fcb5960ac11..5955ca33b9c5 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -271,7 +271,11 @@ static int _clk_pll_enable(struct clk *clk)
         int i = 0;
 
         pllbase = _get_pll_base(clk);
-        reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+        reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+        if (reg & MXC_PLL_DP_CTL_UPEN)
+                return 0;
+
+        reg |= MXC_PLL_DP_CTL_UPEN;
         __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
 
         /* Wait for lock */
@@ -1397,6 +1401,22 @@ static struct clk esdhc4_mx53_clk = {
         .secondary = &esdhc4_ipg_clk,
 };
 
+static struct clk sata_clk = {
+        .parent = &ipg_clk,
+        .enable = _clk_max_enable,
+        .enable_reg = MXC_CCM_CCGR4,
+        .enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
+        .disable = _clk_max_disable,
+};
+
+static struct clk ahci_phy_clk = {
+        .parent = &usb_phy1_clk,
+};
+
+static struct clk ahci_dma_clk = {
+        .parent = &ahb_clk,
+};
+
 DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
@@ -1509,6 +1529,9 @@ static struct clk_lookup mx53_lookups[] = {
         _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
         _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
         _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
+        _REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
+        _REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
+        _REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
 };
 
 static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index 7ca5d0c76f8b..7fe5e462fdca 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -44,3 +44,4 @@ extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
 extern const struct imx_pata_imx_data imx53_pata_imx_data;
 #define imx53_add_pata_imx() \
         imx_add_pata_imx(&imx53_pata_imx_data)
+extern struct platform_device *__init imx53_add_ahci_imx(void);
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 31c152e9def5..0d738fdc8a94 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -186,7 +186,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 
         mdelay(10);
 
-        return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
+        return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data usbh1_config = {
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4ae6257b39a4..57b66d590c52 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -7,7 +7,6 @@ config ARCH_OMAP2PLUS_TYPICAL
         default y
         select AEABI
         select REGULATOR
-        select PM
         select PM_RUNTIME
         select VFP
         select NEON if ARCH_OMAP3 || ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 5f2b55ff04ff..933e9353cb37 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -45,8 +45,6 @@ static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
 static struct omap_board_mux board_mux[] __initdata = {
         { .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux       NULL
 #endif
 
 static void __init am3517_crane_init_early(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 32f5f895568a..3ae16b4e3f52 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -491,23 +491,22 @@ static void __init beagle_opp_init(void)
 
         /* Custom OPP enabled for all xM versions */
         if (cpu_is_omap3630()) {
-                struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
-                struct omap_hwmod *dh = omap_hwmod_lookup("iva");
-                struct device *dev;
+                struct device *mpu_dev, *iva_dev;
 
-                if (!mh || !dh) {
+                mpu_dev = omap2_get_mpuss_device();
+                iva_dev = omap2_get_iva_device();
+
+                if (!mpu_dev || !iva_dev) {
                         pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
-                                __func__, mh, dh);
+                                __func__, mpu_dev, iva_dev);
                         return;
                 }
                 /* Enable MPU 1GHz and lower opps */
-                dev = &mh->od->pdev.dev;
-                r = opp_enable(dev, 800000000);
+                r = opp_enable(mpu_dev, 800000000);
                 /* TODO: MPU 1GHz needs SR and ABB */
 
                 /* Enable IVA 800MHz and lower opps */
-                dev = &dh->od->pdev.dev;
-                r |= opp_enable(dev, 660000000);
+                r |= opp_enable(iva_dev, 660000000);
                 /* TODO: DSP 800MHz needs SR and ABB */
                 if (r) {
                         pr_err("%s: failed to enable higher opp %d\n",
@@ -516,10 +515,8 @@ static void __init beagle_opp_init(void)
                          * Cleanup - disable the higher freqs - we dont care
                          * about the results
                          */
-                        dev = &mh->od->pdev.dev;
-                        opp_disable(dev, 800000000);
-                        dev = &dh->od->pdev.dev;
-                        opp_disable(dev, 660000000);
+                        opp_disable(mpu_dev, 800000000);
+                        opp_disable(iva_dev, 660000000);
                 }
         }
         return;
diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
index f2ea6453ade0..a018a7327879 100644
--- a/arch/arm/mach-omap2/cminst44xx.h
+++ b/arch/arm/mach-omap2/cminst44xx.h
@@ -18,13 +18,36 @@ extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
 
 extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
-extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
+
+# ifdef CONFIG_ARCH_OMAP4
+extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
+                                         u16 clkctrl_offs);
 
 extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
                                        u16 clkctrl_offs);
 extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
                                         u16 clkctrl_offs);
 
+# else
+
+static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
+                                        u16 clkctrl_offs)
+{
+        return 0;
+}
+
+static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
+                                s16 cdoffs, u16 clkctrl_offs)
+{
+}
+
+static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
+                                 u16 clkctrl_offs)
+{
+}
+
+# endif
+
 /*
  * In an ideal world, we would not export these low-level functions,
  * but this will probably take some time to fix properly
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index c7fb22abc219..655e9480eb98 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -821,11 +821,10 @@ static void __init omap_mux_set_cmdline_signals(void)
         if (!omap_mux_options)
                 return;
 
-        options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL);
+        options = kstrdup(omap_mux_options, GFP_KERNEL);
         if (!options)
                 return;
 
-        strcpy(options, omap_mux_options);
         next_opt = options;
 
         while ((token = strsep(&next_opt, ",")) != NULL) {
@@ -855,24 +854,19 @@ static int __init omap_mux_copy_names(struct omap_mux *src,
 
         for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
                 if (src->muxnames[i]) {
-                        dst->muxnames[i] =
-                                kmalloc(strlen(src->muxnames[i]) + 1,
-                                        GFP_KERNEL);
+                        dst->muxnames[i] = kstrdup(src->muxnames[i],
+                                                   GFP_KERNEL);
                         if (!dst->muxnames[i])
                                 goto free;
-                        strcpy(dst->muxnames[i], src->muxnames[i]);
                 }
         }
 
 #ifdef CONFIG_DEBUG_FS
         for (i = 0; i < OMAP_MUX_NR_SIDES; i++) {
                 if (src->balls[i]) {
-                        dst->balls[i] =
-                                kmalloc(strlen(src->balls[i]) + 1,
-                                        GFP_KERNEL);
+                        dst->balls[i] = kstrdup(src->balls[i], GFP_KERNEL);
                         if (!dst->balls[i])
                                 goto free;
-                        strcpy(dst->balls[i], src->balls[i]);
                 }
         }
 #endif
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 2ce2fb7664bc..34c01a7de810 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -621,7 +621,7 @@ void sr_disable(struct voltagedomain *voltdm)
                         sr_v2_disable(sr);
         }
 
-        pm_runtime_put_sync(&sr->pdev->dev);
+        pm_runtime_put_sync_suspend(&sr->pdev->dev);
 }
 
 /**
@@ -860,6 +860,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
         irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 
         pm_runtime_enable(&pdev->dev);
+        pm_runtime_irq_safe(&pdev->dev);
 
         sr_info->pdev = pdev;
         sr_info->srid = pdev->id;
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index e9640728239b..cf1de7d2630d 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -293,7 +293,8 @@ static void __init omap2_gp_clocksource_init(int gptimer_id,
         pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
                 gptimer_id, clksrc.rate);
 
-        __omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1);
+        __omap_dm_timer_load_start(clksrc.io_base,
+                        OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
         init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
 
         if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 2543342dbccb..daa056ed8738 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -48,14 +48,7 @@ void __init omap_pmic_init(int bus, u32 clkrate,
         omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
 }
 
-static struct twl4030_usb_data omap4_usb_pdata = {
-        .phy_init       = omap4430_phy_init,
-        .phy_exit       = omap4430_phy_exit,
-        .phy_power      = omap4430_phy_power,
-        .phy_set_clock  = omap4430_phy_set_clk,
-        .phy_suspend    = omap4430_phy_suspend,
-};
-
+#if defined(CONFIG_ARCH_OMAP3)
 static struct twl4030_usb_data omap3_usb_pdata = {
         .usb_mode       = T2_USB_MODE_ULPI,
 };
@@ -122,6 +115,45 @@ static struct regulator_init_data omap3_vpll2_idata = {
         .consumer_supplies              = omap3_vpll2_supplies,
 };
 
+void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
+                                  u32 pdata_flags, u32 regulators_flags)
+{
+        if (!pmic_data->irq_base)
+                pmic_data->irq_base = TWL4030_IRQ_BASE;
+        if (!pmic_data->irq_end)
+                pmic_data->irq_end = TWL4030_IRQ_END;
+
+        /* Common platform data configurations */
+        if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
+                pmic_data->usb = &omap3_usb_pdata;
+
+        if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
+                pmic_data->bci = &omap3_bci_pdata;
+
+        if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc)
+                pmic_data->madc = &omap3_madc_pdata;
+
+        if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio)
+                pmic_data->audio = &omap3_audio_pdata;
+
+        /* Common regulator configurations */
+        if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
+                pmic_data->vdac = &omap3_vdac_idata;
+
+        if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
+                pmic_data->vpll2 = &omap3_vpll2_idata;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct twl4030_usb_data omap4_usb_pdata = {
+        .phy_init       = omap4430_phy_init,
+        .phy_exit       = omap4430_phy_exit,
+        .phy_power      = omap4430_phy_power,
+        .phy_set_clock  = omap4430_phy_set_clk,
+        .phy_suspend    = omap4430_phy_suspend,
+};
+
 static struct regulator_init_data omap4_vdac_idata = {
         .constraints = {
                 .min_uV                 = 1800000,
@@ -273,32 +305,4 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
             !pmic_data->clk32kg)
                 pmic_data->clk32kg = &omap4_clk32kg_idata;
 }
-
-void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
-                                  u32 pdata_flags, u32 regulators_flags)
-{
-        if (!pmic_data->irq_base)
-                pmic_data->irq_base = TWL4030_IRQ_BASE;
-        if (!pmic_data->irq_end)
-                pmic_data->irq_end = TWL4030_IRQ_END;
-
-        /* Common platform data configurations */
-        if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
-                pmic_data->usb = &omap3_usb_pdata;
-
-        if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
-                pmic_data->bci = &omap3_bci_pdata;
-
-        if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc)
-                pmic_data->madc = &omap3_madc_pdata;
-
-        if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio)
-                pmic_data->audio = &omap3_audio_pdata;
-
-        /* Common regulator configurations */
-        if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
-                pmic_data->vdac = &omap3_vdac_idata;
-
-        if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
-                pmic_data->vpll2 = &omap3_vpll2_idata;
-}
+#endif /* CONFIG_ARCH_OMAP4 */
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 9026249233ad..af0c2fe1ea37 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -65,7 +65,7 @@
 #include <plat/iic.h>
 #include <plat/pm.h>
 
-#include <sound/wm8915.h>
+#include <sound/wm8996.h>
 #include <sound/wm8962.h>
 #include <sound/wm9081.h>
 
@@ -614,7 +614,7 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
         .disable_touch = true,
 };
 
-static struct wm8915_retune_mobile_config wm8915_retune[] = {
+static struct wm8996_retune_mobile_config wm8996_retune[] = {
         {
                 .name = "Sub LPF",
                 .rate = 48000,
@@ -635,12 +635,12 @@ static struct wm8915_retune_mobile_config wm8915_retune[] = {
         },
 };
 
-static struct wm8915_pdata wm8915_pdata __initdata = {
+static struct wm8996_pdata wm8996_pdata __initdata = {
         .ldo_ena = S3C64XX_GPN(7),
         .gpio_base = CODEC_GPIO_BASE,
         .micdet_def = 1,
-        .inl_mode = WM8915_DIFFERRENTIAL_1,
-        .inr_mode = WM8915_DIFFERRENTIAL_1,
+        .inl_mode = WM8996_DIFFERRENTIAL_1,
+        .inr_mode = WM8996_DIFFERRENTIAL_1,
 
         .irq_flags = IRQF_TRIGGER_RISING,
 
@@ -652,8 +652,8 @@ static struct wm8915_pdata wm8915_pdata __initdata = {
                 0x020e, /* GPIO5 == CLKOUT */
         },
 
-        .retune_mobile_cfgs = wm8915_retune,
-        .num_retune_mobile_cfgs = ARRAY_SIZE(wm8915_retune),
+        .retune_mobile_cfgs = wm8996_retune,
+        .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
 };
 
 static struct wm8962_pdata wm8962_pdata __initdata = {
@@ -679,8 +679,8 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
           .platform_data = &glenfarclas_pmic_pdata },
 
         { I2C_BOARD_INFO("wm1250-ev1", 0x27) },
-        { I2C_BOARD_INFO("wm8915", 0x1a),
-          .platform_data = &wm8915_pdata,
+        { I2C_BOARD_INFO("wm8996", 0x1a),
+          .platform_data = &wm8996_pdata,
           .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
         },
         { I2C_BOARD_INFO("wm9081", 0x6c),
diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c
index 964c6c3cd7a6..dd39fee59549 100644
--- a/arch/arm/mach-sa1100/pci-nanoengine.c
+++ b/arch/arm/mach-sa1100/pci-nanoengine.c
@@ -28,6 +28,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/nanoengine.h>
+#include <mach/hardware.h>
 
 static DEFINE_SPINLOCK(nano_lock);
 
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index be7c638b648b..cfbcf8b95599 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -22,6 +22,7 @@
 #include <linux/sched.h>
 #include <linux/uaccess.h>
 
+#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #include "fault.h"
@@ -95,6 +96,33 @@ static const char *usermode_action[] = {
         "signal+warn"
 };
 
+/* Return true if and only if the ARMv6 unaligned access model is in use. */
+static bool cpu_is_v6_unaligned(void)
+{
+        return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U);
+}
+
+static int safe_usermode(int new_usermode, bool warn)
+{
+        /*
+         * ARMv6 and later CPUs can perform unaligned accesses for
+         * most single load and store instructions up to word size.
+         * LDM, STM, LDRD and STRD still need to be handled.
+         *
+         * Ignoring the alignment fault is not an option on these
+         * CPUs since we spin re-faulting the instruction without
+         * making any progress.
+         */
+        if (cpu_is_v6_unaligned() && !(new_usermode & (UM_FIXUP | UM_SIGNAL))) {
+                new_usermode |= UM_FIXUP;
+
+                if (warn)
+                        printk(KERN_WARNING "alignment: ignoring faults is unsafe on this CPU.  Defaulting to fixup mode.\n");
+        }
+
+        return new_usermode;
+}
+
 static int alignment_proc_show(struct seq_file *m, void *v)
 {
         seq_printf(m, "User:\t\t%lu\n", ai_user);
@@ -125,7 +153,7 @@ static ssize_t alignment_proc_write(struct file *file, const char __user *buffer
                 if (get_user(mode, buffer))
                         return -EFAULT;
                 if (mode >= '0' && mode <= '5')
-                        ai_usermode = mode - '0';
+                        ai_usermode = safe_usermode(mode - '0', true);
         }
         return count;
 }
@@ -886,9 +914,16 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
         if (ai_usermode & UM_FIXUP)
                 goto fixup;
 
-        if (ai_usermode & UM_SIGNAL)
-                force_sig(SIGBUS, current);
-        else {
+        if (ai_usermode & UM_SIGNAL) {
+                siginfo_t si;
+
+                si.si_signo = SIGBUS;
+                si.si_errno = 0;
+                si.si_code = BUS_ADRALN;
+                si.si_addr = (void __user *)addr;
+
+                force_sig_info(si.si_signo, &si, current);
+        } else {
                 /*
                  * We're about to disable the alignment trap and return to
                  * user space.  But if an interrupt occurs before actually
@@ -926,20 +961,11 @@ static int __init alignment_init(void)
                 return -ENOMEM;
 #endif
 
-        /*
-         * ARMv6 and later CPUs can perform unaligned accesses for
-         * most single load and store instructions up to word size.
-         * LDM, STM, LDRD and STRD still need to be handled.
-         *
-         * Ignoring the alignment fault is not an option on these
-         * CPUs since we spin re-faulting the instruction without
-         * making any progress.
-         */
-        if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) {
+        if (cpu_is_v6_unaligned()) {
                 cr_alignment &= ~CR_A;
                 cr_no_alignment &= ~CR_A;
                 set_cr(cr_alignment);
-                ai_usermode = UM_FIXUP;
+                ai_usermode = safe_usermode(ai_usermode, false);
         }
 
         hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 2fee782077c1..91bca355cd31 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -441,7 +441,7 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s)
 static inline void poison_init_mem(void *s, size_t count)
 {
         u32 *p = (u32 *)s;
-        while ((count = count - 4))
+        for (; count != 0; count -= 4)
                 *p++ = 0xe7fddef0;
 }
 
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index f8f7ea34bfc5..683af3a182b7 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -410,6 +410,7 @@ __arm946_proc_info:
         .long   0x41009460
         .long   0xff00fff0
         .long   0
+        .long   0
         b       __arm946_setup
         .long   cpu_arch_name
         .long   cpu_elf_name
@@ -418,6 +419,6 @@ __arm946_proc_info:
         .long   arm946_processor_functions
         .long   0
         .long   0
-        .long   arm940_cache_fns
+        .long   arm946_cache_fns
         .size   __arm946_proc_info, . - __arm946_proc_info
 
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index c55916ce3d2a..08e286d70d59 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -79,3 +79,7 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 
 config IMX_HAVE_PLATFORM_SPI_IMX
         bool
+
+config IMX_HAVE_PLATFORM_AHCI
+        bool
+        default y if ARCH_MX53
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index a093b454541d..c11ac8472beb 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -26,3 +26,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) +=  platform-ahci-imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
new file mode 100644
index 000000000000..d8a56aee521b
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_ahci_imx_data_entry_single(soc, _devid)             \
+        {                                                               \
+                .devid = _devid,                                        \
+                .iobase = soc ## _SATA_BASE_ADDR,                       \
+                .irq = soc ## _INT_SATA,                                \
+        }
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
+        imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
+#endif
+
+enum {
+        HOST_CAP = 0x00,
+        HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+        HOST_PORTS_IMPL = 0x0c,
+        HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
+};
+
+static struct clk *sata_clk, *sata_ref_clk;
+
+/* AHCI module Initialization, if return 0, initialization is successful. */
+static int imx_sata_init(struct device *dev, void __iomem *addr)
+{
+        u32 tmpdata;
+        int ret = 0;
+        struct clk *clk;
+
+        sata_clk = clk_get(dev, "ahci");
+        if (IS_ERR(sata_clk)) {
+                dev_err(dev, "no sata clock.\n");
+                return PTR_ERR(sata_clk);
+        }
+        ret = clk_enable(sata_clk);
+        if (ret) {
+                dev_err(dev, "can't enable sata clock.\n");
+                goto put_sata_clk;
+        }
+
+        /* Get the AHCI SATA PHY CLK */
+        sata_ref_clk = clk_get(dev, "ahci_phy");
+        if (IS_ERR(sata_ref_clk)) {
+                dev_err(dev, "no sata ref clock.\n");
+                ret = PTR_ERR(sata_ref_clk);
+                goto release_sata_clk;
+        }
+        ret = clk_enable(sata_ref_clk);
+        if (ret) {
+                dev_err(dev, "can't enable sata ref clock.\n");
+                goto put_sata_ref_clk;
+        }
+
+        /* Get the AHB clock rate, and configure the TIMER1MS reg later */
+        clk = clk_get(dev, "ahci_dma");
+        if (IS_ERR(clk)) {
+                dev_err(dev, "no dma clock.\n");
+                ret = PTR_ERR(clk);
+                goto release_sata_ref_clk;
+        }
+        tmpdata = clk_get_rate(clk) / 1000;
+        clk_put(clk);
+
+        writel(tmpdata, addr + HOST_TIMER1MS);
+
+        tmpdata = readl(addr + HOST_CAP);
+        if (!(tmpdata & HOST_CAP_SSS)) {
+                tmpdata |= HOST_CAP_SSS;
+                writel(tmpdata, addr + HOST_CAP);
+        }
+
+        if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
+                writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
+                        addr + HOST_PORTS_IMPL);
+
+        return 0;
+
+release_sata_ref_clk:
+        clk_disable(sata_ref_clk);
+put_sata_ref_clk:
+        clk_put(sata_ref_clk);
+release_sata_clk:
+        clk_disable(sata_clk);
+put_sata_clk:
+        clk_put(sata_clk);
+
+        return ret;
+}
+
+static void imx_sata_exit(struct device *dev)
+{
+        clk_disable(sata_ref_clk);
+        clk_put(sata_ref_clk);
+
+        clk_disable(sata_clk);
+        clk_put(sata_clk);
+
+}
+struct platform_device *__init imx_add_ahci_imx(
+                const struct imx_ahci_imx_data *data,
+                const struct ahci_platform_data *pdata)
+{
+        struct resource res[] = {
+                {
+                        .start = data->iobase,
+                        .end = data->iobase + SZ_4K - 1,
+                        .flags = IORESOURCE_MEM,
+                }, {
+                        .start = data->irq,
+                        .end = data->irq,
+                        .flags = IORESOURCE_IRQ,
+                },
+        };
+
+        return imx_add_platform_device_dmamask(data->devid, 0,
+                        res, ARRAY_SIZE(res),
+                        pdata, sizeof(*pdata),  DMA_BIT_MASK(32));
+}
+
+struct platform_device *__init imx53_add_ahci_imx(void)
+{
+        struct ahci_platform_data pdata = {
+                .init = imx_sata_init,
+                .exit = imx_sata_exit,
+        };
+
+        return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata);
+}
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 91fc7cdb5dc9..e4dde91f0231 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -44,6 +44,14 @@
 #define UART_PADDR      MX51_UART1_BASE_ADDR
 #endif
 
+/* iMX50/53 have same addresses, but not iMX51 */
+#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#define UART_PADDR      MX53_UART1_BASE_ADDR
+#endif
+
 #define UART_VADDR      IMX_IO_ADDRESS(UART_PADDR)
 
                 .macro  addruart, rp, rv
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 4cbad45edc15..117a381fe3d5 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -309,3 +309,13 @@ struct platform_device *__init imx_add_spi_imx(
 struct platform_device *imx_add_imx_dma(void);
 struct platform_device *imx_add_imx_sdma(char *name,
         resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
+
+#include <linux/ahci_platform.h>
+struct imx_ahci_imx_data {
+        const char *devid;
+        resource_size_t iobase;
+        resource_size_t irq;
+};
+struct platform_device *__init imx_add_ahci_imx(
+                const struct imx_ahci_imx_data *data,
+                const struct ahci_platform_data *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 9440b9e00e89..5408fd1fc736 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -30,6 +30,9 @@
 #define MX53_SDHC_PAD_CTRL      (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
                                 PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
                                 PAD_CTL_SRE_FAST)
+#define PAD_CTRL_I2C    (PAD_CTL_SRE_FAST | PAD_CTL_ODE | PAD_CTL_PKE | \
+                        PAD_CTL_PUE | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP \
+                        | PAD_CTL_HYS)
 
 #define _MX53_PAD_GPIO_19__KPP_COL_5            IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0)
 #define _MX53_PAD_GPIO_19__GPIO4_5              IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0)
@@ -1256,7 +1259,7 @@
 #define MX53_PAD_KEY_COL3__GPIO4_12             (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL3__USBOH3_H2_DP         (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL3__SPDIF_IN1            (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__I2C2_SCL             (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL3__I2C2_SCL             (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_KEY_COL3__ECSPI1_SS3           (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL3__FEC_CRS              (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK             (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1264,7 +1267,7 @@
 #define MX53_PAD_KEY_ROW3__GPIO4_13             (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW3__USBOH3_H2_DM         (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK             (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__I2C2_SDA             (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW3__I2C2_SDA             (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT               (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP         (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0          (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1536,7 +1539,7 @@
 #define MX53_PAD_CSI0_DAT8__KPP_COL_7           (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK         (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC             (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA            (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT8__I2C1_SDA            (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37            (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5                (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9                (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1544,7 +1547,7 @@
 #define MX53_PAD_CSI0_DAT9__KPP_ROW_7           (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI         (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR            (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL            (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT9__I2C1_SCL            (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38            (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6                (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10              (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1631,25 +1634,25 @@
 #define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK               (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS              (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_EB2__ECSPI1_SS0            (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__I2C2_SCL              (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB2__I2C2_SCL              (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_EIM_D16__EMI_WEIM_D_16         (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D16__GPIO3_16              (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D16__IPU_DI0_PIN5          (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK            (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D16__ECSPI1_SCLK           (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__I2C2_SDA              (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D16__I2C2_SDA              (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_EIM_D17__EMI_WEIM_D_17         (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D17__GPIO3_17              (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D17__IPU_DI0_PIN6          (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN            (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D17__ECSPI1_MISO           (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__I2C3_SCL              (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D17__I2C3_SCL              (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_EIM_D18__EMI_WEIM_D_18         (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D18__GPIO3_18              (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D18__IPU_DI0_PIN7          (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO            (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D18__ECSPI1_MOSI           (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__I2C3_SDA              (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D18__I2C3_SDA              (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_EIM_D18__IPU_DI1_D0_CS         (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D19__EMI_WEIM_D_19         (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D19__GPIO3_19              (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1672,7 +1675,7 @@
 #define MX53_PAD_EIM_D21__IPU_DI0_PIN17         (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK            (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D21__CSPI_SCLK             (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__I2C1_SCL              (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D21__I2C1_SCL              (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC              (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D22__EMI_WEIM_D_22         (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D22__GPIO3_22              (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1732,7 +1735,7 @@
 #define MX53_PAD_EIM_D28__UART2_CTS             (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO            (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D28__CSPI_MOSI             (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__I2C1_SDA              (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D28__I2C1_SDA              (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_EIM_D28__IPU_EXT_TRIG          (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D28__IPU_DI0_PIN13         (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D29__EMI_WEIM_D_29         (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2297,7 +2300,7 @@
 #define MX53_PAD_GPIO_9__SCC_FAIL_STATE         (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_3__ESAI1_HCKR             (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_3__GPIO1_3                (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__I2C3_SCL               (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_3__I2C3_SCL               (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN         (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_3__CCM_CLKO2              (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0             (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2305,7 +2308,7 @@
 #define MX53_PAD_GPIO_3__MLB_MLBCLK             (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_6__ESAI1_SCKT             (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_6__GPIO1_6                (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__I2C3_SDA               (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_6__I2C3_SDA               (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_GPIO_6__CCM_CCM_OUT_0          (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB                (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1             (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2333,7 +2336,7 @@
 #define MX53_PAD_GPIO_5__CCM_CLKO               (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2            (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4             (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__I2C3_SCL               (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_5__I2C3_SCL               (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_GPIO_5__CCM_PLL1_BYP           (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_7__ESAI1_TX4_RX1          (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_7__GPIO1_7                (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2356,7 +2359,7 @@
 #define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT              (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1          (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_16__SPDIF_IN1             (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__I2C3_SDA              (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_16__I2C3_SDA              (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_GPIO_16__SJC_DE_B              (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_17__ESAI1_TX0             (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_17__GPIO7_12              (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 6e6735f04ee3..bb8f4a6b3e37 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -13,6 +13,7 @@ config ARCH_OMAP1
         bool "TI OMAP1"
         select CLKDEV_LOOKUP
         select CLKSRC_MMIO
+        select GENERIC_IRQ_CHIP
         help
           "Systems based on omap7xx, omap15xx or omap16xx"
 
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index d1c916fcf770..dc562a5c0a8a 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -195,6 +195,11 @@
 
 #define OMAP36XX_DMA_UART4_TX           81      /* S_DMA_80 */
 #define OMAP36XX_DMA_UART4_RX           82      /* S_DMA_81 */
+
+/* Only for AM35xx */
+#define AM35XX_DMA_UART4_TX             54
+#define AM35XX_DMA_UART4_RX             55
+
 /*----------------------------------------------------------------------------*/
 
 #define OMAP1_DMA_TOUT_IRQ              (1 << 0)
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 926d25c780f3..30e10719b774 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -357,6 +357,7 @@
 #define INT_35XX_EMAC_C0_TX_PULSE_IRQ   69
 #define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
 #define INT_35XX_USBOTG_IRQ             71
+#define INT_35XX_UART4                  84
 #define INT_35XX_CCDC_VD0_IRQ           88
 #define INT_35XX_CCDC_VD1_IRQ           92
 #define INT_35XX_CCDC_VD2_IRQ           93
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 2723f9166ea2..de3b10c18127 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -56,6 +56,9 @@
 #define TI816X_UART2_BASE       0x48022000
 #define TI816X_UART3_BASE       0x48024000
 
+/* AM3505/3517 UART4 */
+#define AM35XX_UART4_BASE       0x4809E000      /* Only on AM3505/3517 */
+
 /* External port on Zoom2/3 */
 #define ZOOM_UART_BASE          0x10000000
 #define ZOOM_UART_VIRT          0xfa400000
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index c60737c49a32..79e7fedb8602 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -423,9 +423,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, u32 da,
 {
         unsigned int i;
         struct scatterlist *sg;
-        void *va;
-
-        va = phys_to_virt(pa);
 
         for_each_sg(sgt->sgl, sg, sgt->nents, i) {
                 unsigned bytes;
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 3b3776d0a1a7..fff68d0d521b 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -910,7 +910,7 @@ omapl138_case_a3	MACH_OMAPL138_CASE_A3	OMAPL138_CASE_A3	3280
 uemd                    MACH_UEMD               UEMD                    3281
 ccwmx51mut              MACH_CCWMX51MUT         CCWMX51MUT              3282
 rockhopper              MACH_ROCKHOPPER         ROCKHOPPER              3283
-nookcolor               MACH_NOOKCOLOR          NOOKCOLOR               3284
+encore                  MACH_ENCORE             ENCORE                  3284
 hkdkc100                MACH_HKDKC100           HKDKC100                3285
 ts42xx                  MACH_TS42XX             TS42XX                  3286
 aebl                    MACH_AEBL               AEBL                    3287