ARM: pxa/spitz_pm: Fix hang when resuming from STR

Devices that use spitz_pm.c will fail to resume
from STR (Suspend To Ram) when the charger plug is inserted
or removed when a device is in STR mode. The culprit is
a misconfigured gpio line - GPIO18. GPIO18 should be configured as a
regular GPIO input but it gets configured as an alternate function
GPIO18_RDY. And then later in postsuspend() it gets configured as
a regular GPIO18 input line.

Fix this by removing the GPIO18_RDY configuration so that GPIO18
only gets configured as a regular gpio input.

Signed-off-by: Marko Katic <dromede@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

1 files changed, 2 insertions, 6 deletions

diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 438f02fe122a..842596d4d31e 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -86,10 +86,7 @@ static void spitz_discharge1(int on)
         gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
 }
 
-static unsigned long gpio18_config[] = {
-        GPIO18_RDY,
-        GPIO18_GPIO,
-};
+static unsigned long gpio18_config = GPIO18_GPIO;
 
 static void spitz_presuspend(void)
 {
@@ -112,7 +109,7 @@ static void spitz_presuspend(void)
         PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
         PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
 
-        pxa2xx_mfp_config(&gpio18_config[0], 1);
+        pxa2xx_mfp_config(&gpio18_config, 1);
         gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
         gpio_free(18);
 
@@ -131,7 +128,6 @@ static void spitz_presuspend(void)
 
 static void spitz_postsuspend(void)
 {
-        pxa2xx_mfp_config(&gpio18_config[1], 1);
 }
 
 static int spitz_should_wakeup(unsigned int resume_on_alarm)