ARM: Kirkwood: Add support LED of OpenBlocks A6

OpenBlocks A6 has three leds via GPIO. This supports them.
And this fix typo about led, because hardware manual has typo.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

2 files changed, 21 insertions, 2 deletions

diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index e80c9d0c4ee9..49d3d74d4d38 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -76,4 +76,23 @@
                         };
                 };
         };
+
+        gpio-leds {
+                compatible = "gpio-leds";
+
+                led-red {
+                        label = "obsa6:red:stat";
+                        gpios = <&gpio1 9 1>;
+                };
+
+                led-green {
+                        label = "obsa6:green:stat";
+                        gpios = <&gpio1 10 1>;
+                };
+
+                led-yellow {
+                        label = "obsa6:yellow:stat";
+                        gpios = <&gpio1 11 1>;
+                };
+        };
 };
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
index e71f984b6d3c..815fc6451d52 100644
--- a/arch/arm/mach-kirkwood/board-openblocks_a6.c
+++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c
@@ -55,8 +55,8 @@ static unsigned int openblocks_a6_mpp_config[] __initdata = {
         MPP38_GPIO, /* INIT */
         MPP39_GPIO, /* USB OC */
         MPP41_GPIO, /* LED: Red */
-        MPP42_GPIO, /* LED: Yellow */
-        MPP43_GPIO, /* LED: Green */
+        MPP42_GPIO, /* LED: Green */
+        MPP43_GPIO, /* LED: Yellow */
         0,
 };