Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3424/2: ixp23xx: fix uncompress.h for recent CRLF decompressor change
  [ARM] 3434/1: pxa i2s amsl define
  [ARM] 3425/1: xsc3: need to include pgtable-hwdef.h
  [ARM] Allow un-muxed syscalls to be available for everyone
  [ARM] 3420/1: Missing clobber in example code
  [ARM] nommu: fixups for the exception vectors
  [ARM] nommu: add nommu specific Kconfig and MMUEXT variable in Makefile
  [ARM] nommu: start-up code
  [ARM] nommu: MPU support in boot/compressed/head.S

11 files changed, 474 insertions, 214 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e91db542eb01..dc5a9332c915 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -77,6 +77,14 @@ config FIQ
 config ARCH_MTD_XIP
         bool
 
+config VECTORS_BASE
+        hex
+        default 0xffff0000 if MMU
+        default DRAM_BASE if REMAP_VECTORS_TO_RAM
+        default 0x00000000
+        help
+          The base address of exception vectors.
+
 source "init/Kconfig"
 
 menu "System Type"
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
new file mode 100644
index 000000000000..e1574be2ded6
--- /dev/null
+++ b/arch/arm/Kconfig-nommu
@@ -0,0 +1,44 @@
+#
+# Kconfig for uClinux(non-paged MM) depend configurations
+# Hyok S. Choi <hyok.choi@samsung.com>
+# 
+
+config SET_MEM_PARAM
+        bool "Set flash/sdram size and base addr"
+        help
+         Say Y to manually set the base addresses and sizes.
+         otherwise, the default values are assigned.
+
+config DRAM_BASE
+        hex '(S)DRAM Base Address' if SET_MEM_PARAM
+        default 0x00800000
+
+config DRAM_SIZE
+        hex '(S)DRAM SIZE' if SET_MEM_PARAM
+        default 0x00800000
+
+config FLASH_MEM_BASE
+        hex 'FLASH Base Address' if SET_MEM_PARAM
+        default 0x00400000
+
+config FLASH_SIZE
+        hex 'FLASH Size' if SET_MEM_PARAM
+        default 0x00400000
+
+config REMAP_VECTORS_TO_RAM
+        bool 'Install vectors to the begining of RAM' if DRAM_BASE
+        depends on DRAM_BASE
+        help
+          The kernel needs to change the hardware exception vectors.
+          In nommu mode, the hardware exception vectors are normally
+          placed at address 0x00000000. However, this region may be
+          occupied by read-only memory depending on H/W design.
+
+          If the region contains read-write memory, say 'n' here.
+
+          If your CPU provides a remap facility which allows the exception
+          vectors to be mapped to writable memory, say 'n' here.
+
+          Otherwise, say 'y' here.  In this case, the kernel will require
+          external support to redirect the hardware exception vectors to
+          the writable versions located at DRAM_BASE.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ce3e804ea0f3..95a96275f88a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -20,6 +20,11 @@ GZFLAGS		:=-9
 # Select a platform tht is kept up-to-date
 KBUILD_DEFCONFIG := versatile_defconfig
 
+# defines filename extension depending memory manement type.
+ifeq ($(CONFIG_MMU),)
+MMUEXT          := -nommu
+endif
+
 ifeq ($(CONFIG_FRAME_POINTER),y)
 CFLAGS          +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
 endif
@@ -73,7 +78,7 @@ AFLAGS		+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
 CHECKFLAGS      += -D__arm__
 
 #Default value
-head-y          := arch/arm/kernel/head.o arch/arm/kernel/init_task.o
+head-y          := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
 textofs-y       := 0x00008000
 
  machine-$(CONFIG_ARCH_RPC)        := rpc
@@ -133,7 +138,7 @@ else
 MACHINE  :=
 endif
   
-export  TEXT_OFFSET GZFLAGS
+export  TEXT_OFFSET GZFLAGS MMUEXT
 
 # Do we have FASTFPE?
 FASTFPE         :=arch/arm/fastfpe
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 491c7e4c9ac6..b56f5e691d65 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -2,6 +2,7 @@
  *  linux/arch/arm/boot/compressed/head.S
  *
  *  Copyright (C) 1996-2002 Russell King
+ *  Copyright (C) 2004 Hyok S. Choi (MPU support)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -320,6 +321,62 @@ params:		ldr	r0, =params_phys
 cache_on:       mov     r3, #8                  @ cache_on function
                 b       call_cache_fn
 
+/*
+ * Initialize the highest priority protection region, PR7
+ * to cover all 32bit address and cacheable and bufferable.
+ */
+__armv4_mpu_cache_on:
+                mov     r0, #0x3f               @ 4G, the whole
+                mcr     p15, 0, r0, c6, c7, 0   @ PR7 Area Setting
+                mcr     p15, 0, r0, c6, c7, 1
+
+                mov     r0, #0x80               @ PR7
+                mcr     p15, 0, r0, c2, c0, 0   @ D-cache on
+                mcr     p15, 0, r0, c2, c0, 1   @ I-cache on
+                mcr     p15, 0, r0, c3, c0, 0   @ write-buffer on
+
+                mov     r0, #0xc000
+                mcr     p15, 0, r0, c5, c0, 1   @ I-access permission
+                mcr     p15, 0, r0, c5, c0, 0   @ D-access permission
+
+                mov     r0, #0
+                mcr     p15, 0, r0, c7, c10, 4  @ drain write buffer
+                mcr     p15, 0, r0, c7, c5, 0   @ flush(inval) I-Cache
+                mcr     p15, 0, r0, c7, c6, 0   @ flush(inval) D-Cache
+                mrc     p15, 0, r0, c1, c0, 0   @ read control reg
+                                                @ ...I .... ..D. WC.M
+                orr     r0, r0, #0x002d         @ .... .... ..1. 11.1
+                orr     r0, r0, #0x1000         @ ...1 .... .... ....
+
+                mcr     p15, 0, r0, c1, c0, 0   @ write control reg
+
+                mov     r0, #0
+                mcr     p15, 0, r0, c7, c5, 0   @ flush(inval) I-Cache
+                mcr     p15, 0, r0, c7, c6, 0   @ flush(inval) D-Cache
+                mov     pc, lr
+
+__armv3_mpu_cache_on:
+                mov     r0, #0x3f               @ 4G, the whole
+                mcr     p15, 0, r0, c6, c7, 0   @ PR7 Area Setting
+
+                mov     r0, #0x80               @ PR7
+                mcr     p15, 0, r0, c2, c0, 0   @ cache on
+                mcr     p15, 0, r0, c3, c0, 0   @ write-buffer on
+
+                mov     r0, #0xc000
+                mcr     p15, 0, r0, c5, c0, 0   @ access permission
+
+                mov     r0, #0
+                mcr     p15, 0, r0, c7, c0, 0   @ invalidate whole cache v3
+                mrc     p15, 0, r0, c1, c0, 0   @ read control reg
+                                                @ .... .... .... WC.M
+                orr     r0, r0, #0x000d         @ .... .... .... 11.1
+                mov     r0, #0
+                mcr     p15, 0, r0, c1, c0, 0   @ write control reg
+
+                mcr     p15, 0, r0, c7, c0, 0   @ invalidate whole cache v3
+                mov     pc, lr
+
 __setup_mmu:    sub     r3, r4, #16384          @ Page directory size
                 bic     r3, r3, #0xff           @ Align the pointer
                 bic     r3, r3, #0x3f00
@@ -496,6 +553,18 @@ proc_types:
                 b       __armv4_mmu_cache_off
                 mov     pc, lr
 
+                .word   0x41007400              @ ARM74x
+                .word   0xff00ff00
+                b       __armv3_mpu_cache_on
+                b       __armv3_mpu_cache_off
+                b       __armv3_mpu_cache_flush
+                
+                .word   0x41009400              @ ARM94x
+                .word   0xff00ff00
+                b       __armv4_mpu_cache_on
+                b       __armv4_mpu_cache_off
+                b       __armv4_mpu_cache_flush
+
                 .word   0x00007000              @ ARM7 IDs
                 .word   0x0000f000
                 mov     pc, lr
@@ -562,6 +631,24 @@ proc_types:
 cache_off:      mov     r3, #12                 @ cache_off function
                 b       call_cache_fn
 
+__armv4_mpu_cache_off:
+                mrc     p15, 0, r0, c1, c0
+                bic     r0, r0, #0x000d
+                mcr     p15, 0, r0, c1, c0      @ turn MPU and cache off
+                mov     r0, #0
+                mcr     p15, 0, r0, c7, c10, 4  @ drain write buffer
+                mcr     p15, 0, r0, c7, c6, 0   @ flush D-Cache
+                mcr     p15, 0, r0, c7, c5, 0   @ flush I-Cache
+                mov     pc, lr
+
+__armv3_mpu_cache_off:
+                mrc     p15, 0, r0, c1, c0
+                bic     r0, r0, #0x000d
+                mcr     p15, 0, r0, c1, c0, 0   @ turn MPU and cache off
+                mov     r0, #0
+                mcr     p15, 0, r0, c7, c0, 0   @ invalidate whole cache v3
+                mov     pc, lr
+
 __armv4_mmu_cache_off:
                 mrc     p15, 0, r0, c1, c0
                 bic     r0, r0, #0x000d
@@ -601,6 +688,24 @@ cache_clean_flush:
                 mov     r3, #16
                 b       call_cache_fn
 
+__armv4_mpu_cache_flush:
+                mov     r2, #1
+                mov     r3, #0
+                mcr     p15, 0, ip, c7, c6, 0   @ invalidate D cache
+                mov     r1, #7 << 5             @ 8 segments
+1:              orr     r3, r1, #63 << 26       @ 64 entries
+2:              mcr     p15, 0, r3, c7, c14, 2  @ clean & invalidate D index
+                subs    r3, r3, #1 << 26
+                bcs     2b                      @ entries 63 to 0
+                subs    r1, r1, #1 << 5
+                bcs     1b                      @ segments 7 to 0
+
+                teq     r2, #0
+                mcrne   p15, 0, ip, c7, c5, 0   @ invalidate I cache
+                mcr     p15, 0, ip, c7, c10, 4  @ drain WB
+                mov     pc, lr
+                
+
 __armv6_mmu_cache_flush:
                 mov     r1, #0
                 mcr     p15, 0, r1, c7, c14, 0  @ clean+invalidate D
@@ -638,6 +743,7 @@ no_cache_id:
                 mov     pc, lr
 
 __armv3_mmu_cache_flush:
+__armv3_mpu_cache_flush:
                 mov     r1, #0
                 mcr     p15, 0, r0, c7, c0, 0   @ invalidate whole cache v3
                 mov     pc, lr
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 355914ffb192..ab8e600c18c8 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -666,7 +666,7 @@ __kuser_helper_start:
  *
  * #define __kernel_dmb() \
  *         asm volatile ( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #95" \
- *              : : : "lr","cc" )
+ *              : : : "r0", "lr","cc" )
  */
 
 __kuser_memory_barrier:                         @ 0xffff0fa0
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
new file mode 100644
index 000000000000..a52da0ddb43d
--- /dev/null
+++ b/arch/arm/kernel/head-common.S
@@ -0,0 +1,217 @@
+/*
+ *  linux/arch/arm/kernel/head-common.S
+ *
+ *  Copyright (C) 1994-2002 Russell King
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+        .type   __switch_data, %object
+__switch_data:
+        .long   __mmap_switched
+        .long   __data_loc                      @ r4
+        .long   __data_start                    @ r5
+        .long   __bss_start                     @ r6
+        .long   _end                            @ r7
+        .long   processor_id                    @ r4
+        .long   __machine_arch_type             @ r5
+        .long   cr_alignment                    @ r6
+        .long   init_thread_union + THREAD_START_SP @ sp
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode,
+ * and uses absolute addresses; this is not position independent.
+ *
+ *  r0  = cp#15 control register
+ *  r1  = machine ID
+ *  r9  = processor ID
+ */
+        .type   __mmap_switched, %function
+__mmap_switched:
+        adr     r3, __switch_data + 4
+
+        ldmia   r3!, {r4, r5, r6, r7}
+        cmp     r4, r5                          @ Copy data segment if needed
+1:      cmpne   r5, r6
+        ldrne   fp, [r4], #4
+        strne   fp, [r5], #4
+        bne     1b
+
+        mov     fp, #0                          @ Clear BSS (and zero fp)
+1:      cmp     r6, r7
+        strcc   fp, [r6],#4
+        bcc     1b
+
+        ldmia   r3, {r4, r5, r6, sp}
+        str     r9, [r4]                        @ Save processor ID
+        str     r1, [r5]                        @ Save machine type
+        bic     r4, r0, #CR_A                   @ Clear 'A' bit
+        stmia   r6, {r0, r4}                    @ Save control register values
+        b       start_kernel
+
+/*
+ * Exception handling.  Something went wrong and we can't proceed.  We
+ * ought to tell the user, but since we don't have any guarantee that
+ * we're even running on the right architecture, we do virtually nothing.
+ *
+ * If CONFIG_DEBUG_LL is set we try to print out something about the error
+ * and hope for the best (useful if bootloader fails to pass a proper
+ * machine ID for example).
+ */
+
+        .type   __error_p, %function
+__error_p:
+#ifdef CONFIG_DEBUG_LL
+        adr     r0, str_p1
+        bl      printascii
+        b       __error
+str_p1: .asciz  "\nError: unrecognized/unsupported processor variant.\n"
+        .align
+#endif
+
+        .type   __error_a, %function
+__error_a:
+#ifdef CONFIG_DEBUG_LL
+        mov     r4, r1                          @ preserve machine ID
+        adr     r0, str_a1
+        bl      printascii
+        mov     r0, r4
+        bl      printhex8
+        adr     r0, str_a2
+        bl      printascii
+        adr     r3, 3f
+        ldmia   r3, {r4, r5, r6}                @ get machine desc list
+        sub     r4, r3, r4                      @ get offset between virt&phys
+        add     r5, r5, r4                      @ convert virt addresses to
+        add     r6, r6, r4                      @ physical address space
+1:      ldr     r0, [r5, #MACHINFO_TYPE]        @ get machine type
+        bl      printhex8
+        mov     r0, #'\t'
+        bl      printch
+        ldr     r0, [r5, #MACHINFO_NAME]        @ get machine name
+        add     r0, r0, r4
+        bl      printascii
+        mov     r0, #'\n'
+        bl      printch
+        add     r5, r5, #SIZEOF_MACHINE_DESC    @ next machine_desc
+        cmp     r5, r6
+        blo     1b
+        adr     r0, str_a3
+        bl      printascii
+        b       __error
+str_a1: .asciz  "\nError: unrecognized/unsupported machine ID (r1 = 0x"
+str_a2: .asciz  ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
+str_a3: .asciz  "\nPlease check your kernel config and/or bootloader.\n"
+        .align
+#endif
+
+        .type   __error, %function
+__error:
+#ifdef CONFIG_ARCH_RPC
+/*
+ * Turn the screen red on a error - RiscPC only.
+ */
+        mov     r0, #0x02000000
+        mov     r3, #0x11
+        orr     r3, r3, r3, lsl #8
+        orr     r3, r3, r3, lsl #16
+        str     r3, [r0], #4
+        str     r3, [r0], #4
+        str     r3, [r0], #4
+        str     r3, [r0], #4
+#endif
+1:      mov     r0, r0
+        b       1b
+
+
+/*
+ * Read processor ID register (CP#15, CR0), and look up in the linker-built
+ * supported processor list.  Note that we can't use the absolute addresses
+ * for the __proc_info lists since we aren't running with the MMU on
+ * (and therefore, we are not in the correct address space).  We have to
+ * calculate the offset.
+ *
+ *      r9 = cpuid
+ * Returns:
+ *      r3, r4, r6 corrupted
+ *      r5 = proc_info pointer in physical address space
+ *      r9 = cpuid (preserved)
+ */
+        .type   __lookup_processor_type, %function
+__lookup_processor_type:
+        adr     r3, 3f
+        ldmda   r3, {r5 - r7}
+        sub     r3, r3, r7                      @ get offset between virt&phys
+        add     r5, r5, r3                      @ convert virt addresses to
+        add     r6, r6, r3                      @ physical address space
+1:      ldmia   r5, {r3, r4}                    @ value, mask
+        and     r4, r4, r9                      @ mask wanted bits
+        teq     r3, r4
+        beq     2f
+        add     r5, r5, #PROC_INFO_SZ           @ sizeof(proc_info_list)
+        cmp     r5, r6
+        blo     1b
+        mov     r5, #0                          @ unknown processor
+2:      mov     pc, lr
+
+/*
+ * This provides a C-API version of the above function.
+ */
+ENTRY(lookup_processor_type)
+        stmfd   sp!, {r4 - r7, r9, lr}
+        mov     r9, r0
+        bl      __lookup_processor_type
+        mov     r0, r5
+        ldmfd   sp!, {r4 - r7, r9, pc}
+
+/*
+ * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
+ * more information about the __proc_info and __arch_info structures.
+ */
+        .long   __proc_info_begin
+        .long   __proc_info_end
+3:      .long   .
+        .long   __arch_info_begin
+        .long   __arch_info_end
+
+/*
+ * Lookup machine architecture in the linker-build list of architectures.
+ * Note that we can't use the absolute addresses for the __arch_info
+ * lists since we aren't running with the MMU on (and therefore, we are
+ * not in the correct address space).  We have to calculate the offset.
+ *
+ *  r1 = machine architecture number
+ * Returns:
+ *  r3, r4, r6 corrupted
+ *  r5 = mach_info pointer in physical address space
+ */
+        .type   __lookup_machine_type, %function
+__lookup_machine_type:
+        adr     r3, 3b
+        ldmia   r3, {r4, r5, r6}
+        sub     r3, r3, r4                      @ get offset between virt&phys
+        add     r5, r5, r3                      @ convert virt addresses to
+        add     r6, r6, r3                      @ physical address space
+1:      ldr     r3, [r5, #MACHINFO_TYPE]        @ get machine type
+        teq     r3, r1                          @ matches loader number?
+        beq     2f                              @ found
+        add     r5, r5, #SIZEOF_MACHINE_DESC    @ next machine_desc
+        cmp     r5, r6
+        blo     1b
+        mov     r5, #0                          @ unknown machine
+2:      mov     pc, lr
+
+/*
+ * This provides a C-API version of the above function.
+ */
+ENTRY(lookup_machine_type)
+        stmfd   sp!, {r4 - r6, lr}
+        mov     r1, r0
+        bl      __lookup_machine_type
+        mov     r0, r5
+        ldmfd   sp!, {r4 - r6, pc}
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
new file mode 100644
index 000000000000..b093ab8738b5
--- /dev/null
+++ b/arch/arm/kernel/head-nommu.S
@@ -0,0 +1,83 @@
+/*
+ *  linux/arch/arm/kernel/head-nommu.S
+ *
+ *  Copyright (C) 1994-2002 Russell King
+ *  Copyright (C) 2003-2006 Hyok S. Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Common kernel startup code (non-paged MM)
+ *    for 32-bit CPUs which has a process ID register(CP15).
+ *
+ */
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/assembler.h>
+#include <asm/mach-types.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+#include <asm/constants.h>
+#include <asm/system.h>
+
+#define PROCINFO_INITFUNC       12
+
+/*
+ * Kernel startup entry point.
+ * ---------------------------
+ *
+ * This is normally called from the decompressor code.  The requirements
+ * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
+ * r1 = machine nr.
+ *
+ * See linux/arch/arm/tools/mach-types for the complete list of machine
+ * numbers for r1.
+ *
+ */
+        __INIT
+        .type   stext, %function
+ENTRY(stext)
+        msr     cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode
+                                                @ and irqs disabled
+        mrc     p15, 0, r9, c0, c0              @ get processor id
+        bl      __lookup_processor_type         @ r5=procinfo r9=cpuid
+        movs    r10, r5                         @ invalid processor (r5=0)?
+        beq     __error_p                               @ yes, error 'p'
+        bl      __lookup_machine_type           @ r5=machinfo
+        movs    r8, r5                          @ invalid machine (r5=0)?
+        beq     __error_a                       @ yes, error 'a'
+
+        ldr     r13, __switch_data              @ address to jump to after
+                                                @ the initialization is done
+        adr     lr, __after_proc_init           @ return (PIC) address
+        add     pc, r10, #PROCINFO_INITFUNC
+
+/*
+ * Set the Control Register and Read the process ID.
+ */
+        .type   __after_proc_init, %function
+__after_proc_init:
+        mrc     p15, 0, r0, c1, c0, 0           @ read control reg
+#ifdef CONFIG_ALIGNMENT_TRAP
+        orr     r0, r0, #CR_A
+#else
+        bic     r0, r0, #CR_A
+#endif
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+        bic     r0, r0, #CR_C
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+        bic     r0, r0, #CR_Z
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+        bic     r0, r0, #CR_I
+#endif
+        mcr     p15, 0, r0, c1, c0, 0           @ write control reg
+
+        mov     pc, r13                         @ clear the BSS and jump
+                                                @ to start_kernel
+
+#include "head-common.S"
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 53b6901f70a6..04b66a9328ef 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -102,49 +102,6 @@ ENTRY(stext)
         adr     lr, __enable_mmu                @ return (PIC) address
         add     pc, r10, #PROCINFO_INITFUNC
 
-        .type   __switch_data, %object
-__switch_data:
-        .long   __mmap_switched
-        .long   __data_loc                      @ r4
-        .long   __data_start                    @ r5
-        .long   __bss_start                     @ r6
-        .long   _end                            @ r7
-        .long   processor_id                    @ r4
-        .long   __machine_arch_type             @ r5
-        .long   cr_alignment                    @ r6
-        .long   init_thread_union + THREAD_START_SP @ sp
-
-/*
- * The following fragment of code is executed with the MMU on, and uses
- * absolute addresses; this is not position independent.
- *
- *  r0  = cp#15 control register
- *  r1  = machine ID
- *  r9  = processor ID
- */
-        .type   __mmap_switched, %function
-__mmap_switched:
-        adr     r3, __switch_data + 4
-
-        ldmia   r3!, {r4, r5, r6, r7}
-        cmp     r4, r5                          @ Copy data segment if needed
-1:      cmpne   r5, r6
-        ldrne   fp, [r4], #4
-        strne   fp, [r5], #4
-        bne     1b
-
-        mov     fp, #0                          @ Clear BSS (and zero fp)
-1:      cmp     r6, r7
-        strcc   fp, [r6],#4
-        bcc     1b
-
-        ldmia   r3, {r4, r5, r6, sp}
-        str     r9, [r4]                        @ Save processor ID
-        str     r1, [r5]                        @ Save machine type
-        bic     r4, r0, #CR_A                   @ Clear 'A' bit
-        stmia   r6, {r0, r4}                    @ Save control register values
-        b       start_kernel
-
 #if defined(CONFIG_SMP)
         .type   secondary_startup, #function
 ENTRY(secondary_startup)
@@ -367,166 +324,4 @@ __create_page_tables:
         mov     pc, lr
         .ltorg
 
-
-
-/*
- * Exception handling.  Something went wrong and we can't proceed.  We
- * ought to tell the user, but since we don't have any guarantee that
- * we're even running on the right architecture, we do virtually nothing.
- *
- * If CONFIG_DEBUG_LL is set we try to print out something about the error
- * and hope for the best (useful if bootloader fails to pass a proper
- * machine ID for example).
- */
-
-        .type   __error_p, %function
-__error_p:
-#ifdef CONFIG_DEBUG_LL
-        adr     r0, str_p1
-        bl      printascii
-        b       __error
-str_p1: .asciz  "\nError: unrecognized/unsupported processor variant.\n"
-        .align
-#endif
-
-        .type   __error_a, %function
-__error_a:
-#ifdef CONFIG_DEBUG_LL
-        mov     r4, r1                          @ preserve machine ID
-        adr     r0, str_a1
-        bl      printascii
-        mov     r0, r4
-        bl      printhex8
-        adr     r0, str_a2
-        bl      printascii
-        adr     r3, 3f
-        ldmia   r3, {r4, r5, r6}                @ get machine desc list
-        sub     r4, r3, r4                      @ get offset between virt&phys
-        add     r5, r5, r4                      @ convert virt addresses to
-        add     r6, r6, r4                      @ physical address space
-1:      ldr     r0, [r5, #MACHINFO_TYPE]        @ get machine type
-        bl      printhex8
-        mov     r0, #'\t'
-        bl      printch
-        ldr     r0, [r5, #MACHINFO_NAME]        @ get machine name
-        add     r0, r0, r4
-        bl      printascii
-        mov     r0, #'\n'
-        bl      printch
-        add     r5, r5, #SIZEOF_MACHINE_DESC    @ next machine_desc
-        cmp     r5, r6
-        blo     1b
-        adr     r0, str_a3
-        bl      printascii
-        b       __error
-str_a1: .asciz  "\nError: unrecognized/unsupported machine ID (r1 = 0x"
-str_a2: .asciz  ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
-str_a3: .asciz  "\nPlease check your kernel config and/or bootloader.\n"
-        .align
-#endif
-
-        .type   __error, %function
-__error:
-#ifdef CONFIG_ARCH_RPC
-/*
- * Turn the screen red on a error - RiscPC only.
- */
-        mov     r0, #0x02000000
-        mov     r3, #0x11
-        orr     r3, r3, r3, lsl #8
-        orr     r3, r3, r3, lsl #16
-        str     r3, [r0], #4
-        str     r3, [r0], #4
-        str     r3, [r0], #4
-        str     r3, [r0], #4
-#endif
-1:      mov     r0, r0
-        b       1b
-
-
-/*
- * Read processor ID register (CP#15, CR0), and look up in the linker-built
- * supported processor list.  Note that we can't use the absolute addresses
- * for the __proc_info lists since we aren't running with the MMU on
- * (and therefore, we are not in the correct address space).  We have to
- * calculate the offset.
- *
- *      r9 = cpuid
- * Returns:
- *      r3, r4, r6 corrupted
- *      r5 = proc_info pointer in physical address space
- *      r9 = cpuid (preserved)
- */
-        .type   __lookup_processor_type, %function
-__lookup_processor_type:
-        adr     r3, 3f
-        ldmda   r3, {r5 - r7}
-        sub     r3, r3, r7                      @ get offset between virt&phys
-        add     r5, r5, r3                      @ convert virt addresses to
-        add     r6, r6, r3                      @ physical address space
-1:      ldmia   r5, {r3, r4}                    @ value, mask
-        and     r4, r4, r9                      @ mask wanted bits
-        teq     r3, r4
-        beq     2f
-        add     r5, r5, #PROC_INFO_SZ           @ sizeof(proc_info_list)
-        cmp     r5, r6
-        blo     1b
-        mov     r5, #0                          @ unknown processor
-2:      mov     pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_processor_type)
-        stmfd   sp!, {r4 - r7, r9, lr}
-        mov     r9, r0
-        bl      __lookup_processor_type
-        mov     r0, r5
-        ldmfd   sp!, {r4 - r7, r9, pc}
-
-/*
- * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
- * more information about the __proc_info and __arch_info structures.
- */
-        .long   __proc_info_begin
-        .long   __proc_info_end
-3:      .long   .
-        .long   __arch_info_begin
-        .long   __arch_info_end
-
-/*
- * Lookup machine architecture in the linker-build list of architectures.
- * Note that we can't use the absolute addresses for the __arch_info
- * lists since we aren't running with the MMU on (and therefore, we are
- * not in the correct address space).  We have to calculate the offset.
- *
- *  r1 = machine architecture number
- * Returns:
- *  r3, r4, r6 corrupted
- *  r5 = mach_info pointer in physical address space
- */
-        .type   __lookup_machine_type, %function
-__lookup_machine_type:
-        adr     r3, 3b
-        ldmia   r3, {r4, r5, r6}
-        sub     r3, r3, r4                      @ get offset between virt&phys
-        add     r5, r5, r3                      @ convert virt addresses to
-        add     r6, r6, r3                      @ physical address space
-1:      ldr     r3, [r5, #MACHINFO_TYPE]        @ get machine type
-        teq     r3, r1                          @ matches loader number?
-        beq     2f                              @ found
-        add     r5, r5, #SIZEOF_MACHINE_DESC    @ next machine_desc
-        cmp     r5, r6
-        blo     1b
-        mov     r5, #0                          @ unknown machine
-2:      mov     pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_machine_type)
-        stmfd   sp!, {r4 - r6, lr}
-        mov     r1, r0
-        bl      __lookup_machine_type
-        mov     r0, r5
-        ldmfd   sp!, {r4 - r6, pc}
+#include "head-common.S"
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
index 9991049c522d..27beece15502 100644
--- a/arch/arm/kernel/signal.h
+++ b/arch/arm/kernel/signal.h
@@ -7,6 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define KERN_SIGRETURN_CODE     0xffff0500
+#define KERN_SIGRETURN_CODE     (CONFIG_VECTORS_BASE + 0x00000500)
 
 extern const unsigned long sigreturn_codes[7];
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index d566d5f4574d..35230a060108 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -688,6 +688,7 @@ EXPORT_SYMBOL(abort);
 
 void __init trap_init(void)
 {
+        unsigned long vectors = CONFIG_VECTORS_BASE;
         extern char __stubs_start[], __stubs_end[];
         extern char __vectors_start[], __vectors_end[];
         extern char __kuser_helper_start[], __kuser_helper_end[];
@@ -698,9 +699,9 @@ void __init trap_init(void)
          * into the vector page, mapped at 0xffff0000, and ensure these
          * are visible to the instruction stream.
          */
-        memcpy((void *)0xffff0000, __vectors_start, __vectors_end - __vectors_start);
-        memcpy((void *)0xffff0200, __stubs_start, __stubs_end - __stubs_start);
-        memcpy((void *)0xffff1000 - kuser_sz, __kuser_helper_start, kuser_sz);
+        memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
+        memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
+        memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
 
         /*
          * Copy signal return handlers into the vector page, and
@@ -709,6 +710,6 @@ void __init trap_init(void)
         memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
                sizeof(sigreturn_codes));
 
-        flush_icache_range(0xffff0000, 0xffff0000 + PAGE_SIZE);
+        flush_icache_range(vectors, vectors + PAGE_SIZE);
         modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
 }
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index f90513e9af0c..b9dfce57c272 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -30,6 +30,7 @@
 #include <asm/procinfo.h>
 #include <asm/hardware.h>
 #include <asm/pgtable.h>
+#include <asm/pgtable-hwdef.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include "proc-macros.S"