diff options
author | Andrew Victor <linux@maxim.org.za> | 2008-01-24 09:16:41 -0500 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2008-01-26 10:01:14 -0500 |
commit | 86640cae60147b0cd2705145de8067e24db70a8b (patch) | |
tree | 2e95dda80b6065851c15f6fb8014c9cf933f97e0 /arch/arm | |
parent | 2b3b3516b6eeea1464e205b2dde9ebc9b7dd2ec8 (diff) |
[ARM] 4765/1: [AT91] AT91CAP9A-DK board support
Add support for the Atmel AT91CAP9A-DK Evaluation Kit board.
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/configs/at91cap9adk_defconfig | 1143 | ||||
-rw-r--r-- | arch/arm/mach-at91/Kconfig | 19 | ||||
-rw-r--r-- | arch/arm/mach-at91/Makefile | 3 | ||||
-rw-r--r-- | arch/arm/mach-at91/board-cap9adk.c | 359 |
4 files changed, 1522 insertions, 2 deletions
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig new file mode 100644 index 000000000000..e32e73648129 --- /dev/null +++ b/arch/arm/configs/at91cap9adk_defconfig | |||
@@ -0,0 +1,1143 @@ | |||
1 | # | ||
2 | # Automatically generated make config: don't edit | ||
3 | # Linux kernel version: 2.6.24-rc8 | ||
4 | # Wed Jan 23 22:55:57 2008 | ||
5 | # | ||
6 | CONFIG_ARM=y | ||
7 | CONFIG_SYS_SUPPORTS_APM_EMULATION=y | ||
8 | CONFIG_GENERIC_GPIO=y | ||
9 | # CONFIG_GENERIC_TIME is not set | ||
10 | # CONFIG_GENERIC_CLOCKEVENTS is not set | ||
11 | CONFIG_MMU=y | ||
12 | # CONFIG_NO_IOPORT is not set | ||
13 | CONFIG_GENERIC_HARDIRQS=y | ||
14 | CONFIG_STACKTRACE_SUPPORT=y | ||
15 | CONFIG_LOCKDEP_SUPPORT=y | ||
16 | CONFIG_TRACE_IRQFLAGS_SUPPORT=y | ||
17 | CONFIG_HARDIRQS_SW_RESEND=y | ||
18 | CONFIG_GENERIC_IRQ_PROBE=y | ||
19 | CONFIG_RWSEM_GENERIC_SPINLOCK=y | ||
20 | # CONFIG_ARCH_HAS_ILOG2_U32 is not set | ||
21 | # CONFIG_ARCH_HAS_ILOG2_U64 is not set | ||
22 | CONFIG_GENERIC_HWEIGHT=y | ||
23 | CONFIG_GENERIC_CALIBRATE_DELAY=y | ||
24 | CONFIG_ZONE_DMA=y | ||
25 | CONFIG_VECTORS_BASE=0xffff0000 | ||
26 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | ||
27 | |||
28 | # | ||
29 | # General setup | ||
30 | # | ||
31 | CONFIG_EXPERIMENTAL=y | ||
32 | CONFIG_BROKEN_ON_SMP=y | ||
33 | CONFIG_INIT_ENV_ARG_LIMIT=32 | ||
34 | CONFIG_LOCALVERSION="" | ||
35 | # CONFIG_LOCALVERSION_AUTO is not set | ||
36 | # CONFIG_SWAP is not set | ||
37 | CONFIG_SYSVIPC=y | ||
38 | CONFIG_SYSVIPC_SYSCTL=y | ||
39 | # CONFIG_POSIX_MQUEUE is not set | ||
40 | # CONFIG_BSD_PROCESS_ACCT is not set | ||
41 | # CONFIG_TASKSTATS is not set | ||
42 | # CONFIG_USER_NS is not set | ||
43 | # CONFIG_PID_NS is not set | ||
44 | # CONFIG_AUDIT is not set | ||
45 | # CONFIG_IKCONFIG is not set | ||
46 | CONFIG_LOG_BUF_SHIFT=14 | ||
47 | # CONFIG_CGROUPS is not set | ||
48 | CONFIG_FAIR_GROUP_SCHED=y | ||
49 | CONFIG_FAIR_USER_SCHED=y | ||
50 | # CONFIG_FAIR_CGROUP_SCHED is not set | ||
51 | CONFIG_SYSFS_DEPRECATED=y | ||
52 | # CONFIG_RELAY is not set | ||
53 | CONFIG_BLK_DEV_INITRD=y | ||
54 | CONFIG_INITRAMFS_SOURCE="" | ||
55 | CONFIG_CC_OPTIMIZE_FOR_SIZE=y | ||
56 | CONFIG_SYSCTL=y | ||
57 | # CONFIG_EMBEDDED is not set | ||
58 | CONFIG_UID16=y | ||
59 | CONFIG_SYSCTL_SYSCALL=y | ||
60 | CONFIG_KALLSYMS=y | ||
61 | # CONFIG_KALLSYMS_ALL is not set | ||
62 | # CONFIG_KALLSYMS_EXTRA_PASS is not set | ||
63 | CONFIG_HOTPLUG=y | ||
64 | CONFIG_PRINTK=y | ||
65 | CONFIG_BUG=y | ||
66 | CONFIG_ELF_CORE=y | ||
67 | CONFIG_BASE_FULL=y | ||
68 | CONFIG_FUTEX=y | ||
69 | CONFIG_ANON_INODES=y | ||
70 | CONFIG_EPOLL=y | ||
71 | CONFIG_SIGNALFD=y | ||
72 | CONFIG_EVENTFD=y | ||
73 | CONFIG_SHMEM=y | ||
74 | CONFIG_VM_EVENT_COUNTERS=y | ||
75 | CONFIG_SLAB=y | ||
76 | # CONFIG_SLUB is not set | ||
77 | # CONFIG_SLOB is not set | ||
78 | CONFIG_SLABINFO=y | ||
79 | CONFIG_RT_MUTEXES=y | ||
80 | # CONFIG_TINY_SHMEM is not set | ||
81 | CONFIG_BASE_SMALL=0 | ||
82 | CONFIG_MODULES=y | ||
83 | CONFIG_MODULE_UNLOAD=y | ||
84 | # CONFIG_MODULE_FORCE_UNLOAD is not set | ||
85 | # CONFIG_MODVERSIONS is not set | ||
86 | # CONFIG_MODULE_SRCVERSION_ALL is not set | ||
87 | CONFIG_KMOD=y | ||
88 | CONFIG_BLOCK=y | ||
89 | # CONFIG_LBD is not set | ||
90 | # CONFIG_BLK_DEV_IO_TRACE is not set | ||
91 | # CONFIG_LSF is not set | ||
92 | # CONFIG_BLK_DEV_BSG is not set | ||
93 | |||
94 | # | ||
95 | # IO Schedulers | ||
96 | # | ||
97 | CONFIG_IOSCHED_NOOP=y | ||
98 | CONFIG_IOSCHED_AS=y | ||
99 | # CONFIG_IOSCHED_DEADLINE is not set | ||
100 | # CONFIG_IOSCHED_CFQ is not set | ||
101 | CONFIG_DEFAULT_AS=y | ||
102 | # CONFIG_DEFAULT_DEADLINE is not set | ||
103 | # CONFIG_DEFAULT_CFQ is not set | ||
104 | # CONFIG_DEFAULT_NOOP is not set | ||
105 | CONFIG_DEFAULT_IOSCHED="anticipatory" | ||
106 | |||
107 | # | ||
108 | # System Type | ||
109 | # | ||
110 | # CONFIG_ARCH_AAEC2000 is not set | ||
111 | # CONFIG_ARCH_INTEGRATOR is not set | ||
112 | # CONFIG_ARCH_REALVIEW is not set | ||
113 | # CONFIG_ARCH_VERSATILE is not set | ||
114 | CONFIG_ARCH_AT91=y | ||
115 | # CONFIG_ARCH_CLPS7500 is not set | ||
116 | # CONFIG_ARCH_CLPS711X is not set | ||
117 | # CONFIG_ARCH_CO285 is not set | ||
118 | # CONFIG_ARCH_EBSA110 is not set | ||
119 | # CONFIG_ARCH_EP93XX is not set | ||
120 | # CONFIG_ARCH_FOOTBRIDGE is not set | ||
121 | # CONFIG_ARCH_NETX is not set | ||
122 | # CONFIG_ARCH_H720X is not set | ||
123 | # CONFIG_ARCH_IMX is not set | ||
124 | # CONFIG_ARCH_IOP13XX is not set | ||
125 | # CONFIG_ARCH_IOP32X is not set | ||
126 | # CONFIG_ARCH_IOP33X is not set | ||
127 | # CONFIG_ARCH_IXP23XX is not set | ||
128 | # CONFIG_ARCH_IXP2000 is not set | ||
129 | # CONFIG_ARCH_IXP4XX is not set | ||
130 | # CONFIG_ARCH_L7200 is not set | ||
131 | # CONFIG_ARCH_KS8695 is not set | ||
132 | # CONFIG_ARCH_NS9XXX is not set | ||
133 | # CONFIG_ARCH_MXC is not set | ||
134 | # CONFIG_ARCH_PNX4008 is not set | ||
135 | # CONFIG_ARCH_PXA is not set | ||
136 | # CONFIG_ARCH_RPC is not set | ||
137 | # CONFIG_ARCH_SA1100 is not set | ||
138 | # CONFIG_ARCH_S3C2410 is not set | ||
139 | # CONFIG_ARCH_SHARK is not set | ||
140 | # CONFIG_ARCH_LH7A40X is not set | ||
141 | # CONFIG_ARCH_DAVINCI is not set | ||
142 | # CONFIG_ARCH_OMAP is not set | ||
143 | |||
144 | # | ||
145 | # Boot options | ||
146 | # | ||
147 | |||
148 | # | ||
149 | # Power management | ||
150 | # | ||
151 | |||
152 | # | ||
153 | # Atmel AT91 System-on-Chip | ||
154 | # | ||
155 | # CONFIG_ARCH_AT91RM9200 is not set | ||
156 | # CONFIG_ARCH_AT91SAM9260 is not set | ||
157 | # CONFIG_ARCH_AT91SAM9261 is not set | ||
158 | # CONFIG_ARCH_AT91SAM9263 is not set | ||
159 | # CONFIG_ARCH_AT91SAM9RL is not set | ||
160 | CONFIG_ARCH_AT91CAP9=y | ||
161 | # CONFIG_ARCH_AT91X40 is not set | ||
162 | CONFIG_AT91_PMC_UNIT=y | ||
163 | |||
164 | # | ||
165 | # AT91CAP9 Board Type | ||
166 | # | ||
167 | CONFIG_MACH_AT91CAP9ADK=y | ||
168 | |||
169 | # | ||
170 | # AT91 Board Options | ||
171 | # | ||
172 | CONFIG_MTD_AT91_DATAFLASH_CARD=y | ||
173 | # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set | ||
174 | |||
175 | # | ||
176 | # AT91 Feature Selections | ||
177 | # | ||
178 | CONFIG_AT91_PROGRAMMABLE_CLOCKS=y | ||
179 | CONFIG_AT91_TIMER_HZ=100 | ||
180 | |||
181 | # | ||
182 | # Processor Type | ||
183 | # | ||
184 | CONFIG_CPU_32=y | ||
185 | CONFIG_CPU_ARM926T=y | ||
186 | CONFIG_CPU_32v5=y | ||
187 | CONFIG_CPU_ABRT_EV5TJ=y | ||
188 | CONFIG_CPU_CACHE_VIVT=y | ||
189 | CONFIG_CPU_COPY_V4WB=y | ||
190 | CONFIG_CPU_TLB_V4WBI=y | ||
191 | CONFIG_CPU_CP15=y | ||
192 | CONFIG_CPU_CP15_MMU=y | ||
193 | |||
194 | # | ||
195 | # Processor Features | ||
196 | # | ||
197 | # CONFIG_ARM_THUMB is not set | ||
198 | # CONFIG_CPU_ICACHE_DISABLE is not set | ||
199 | # CONFIG_CPU_DCACHE_DISABLE is not set | ||
200 | # CONFIG_CPU_DCACHE_WRITETHROUGH is not set | ||
201 | # CONFIG_CPU_CACHE_ROUND_ROBIN is not set | ||
202 | # CONFIG_OUTER_CACHE is not set | ||
203 | |||
204 | # | ||
205 | # Bus support | ||
206 | # | ||
207 | # CONFIG_PCI_SYSCALL is not set | ||
208 | # CONFIG_ARCH_SUPPORTS_MSI is not set | ||
209 | # CONFIG_PCCARD is not set | ||
210 | |||
211 | # | ||
212 | # Kernel Features | ||
213 | # | ||
214 | # CONFIG_TICK_ONESHOT is not set | ||
215 | # CONFIG_PREEMPT is not set | ||
216 | # CONFIG_NO_IDLE_HZ is not set | ||
217 | CONFIG_HZ=100 | ||
218 | CONFIG_AEABI=y | ||
219 | CONFIG_OABI_COMPAT=y | ||
220 | # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set | ||
221 | CONFIG_SELECT_MEMORY_MODEL=y | ||
222 | CONFIG_FLATMEM_MANUAL=y | ||
223 | # CONFIG_DISCONTIGMEM_MANUAL is not set | ||
224 | # CONFIG_SPARSEMEM_MANUAL is not set | ||
225 | CONFIG_FLATMEM=y | ||
226 | CONFIG_FLAT_NODE_MEM_MAP=y | ||
227 | # CONFIG_SPARSEMEM_STATIC is not set | ||
228 | # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set | ||
229 | CONFIG_SPLIT_PTLOCK_CPUS=4096 | ||
230 | # CONFIG_RESOURCES_64BIT is not set | ||
231 | CONFIG_ZONE_DMA_FLAG=1 | ||
232 | CONFIG_BOUNCE=y | ||
233 | CONFIG_VIRT_TO_BUS=y | ||
234 | CONFIG_LEDS=y | ||
235 | CONFIG_LEDS_TIMER=y | ||
236 | CONFIG_LEDS_CPU=y | ||
237 | CONFIG_ALIGNMENT_TRAP=y | ||
238 | |||
239 | # | ||
240 | # Boot options | ||
241 | # | ||
242 | CONFIG_ZBOOT_ROM_TEXT=0x0 | ||
243 | CONFIG_ZBOOT_ROM_BSS=0x0 | ||
244 | CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" | ||
245 | # CONFIG_XIP_KERNEL is not set | ||
246 | # CONFIG_KEXEC is not set | ||
247 | |||
248 | # | ||
249 | # Floating point emulation | ||
250 | # | ||
251 | |||
252 | # | ||
253 | # At least one emulation must be selected | ||
254 | # | ||
255 | CONFIG_FPE_NWFPE=y | ||
256 | # CONFIG_FPE_NWFPE_XP is not set | ||
257 | # CONFIG_FPE_FASTFPE is not set | ||
258 | # CONFIG_VFP is not set | ||
259 | |||
260 | # | ||
261 | # Userspace binary formats | ||
262 | # | ||
263 | CONFIG_BINFMT_ELF=y | ||
264 | # CONFIG_BINFMT_AOUT is not set | ||
265 | # CONFIG_BINFMT_MISC is not set | ||
266 | |||
267 | # | ||
268 | # Power management options | ||
269 | # | ||
270 | # CONFIG_PM is not set | ||
271 | CONFIG_SUSPEND_UP_POSSIBLE=y | ||
272 | |||
273 | # | ||
274 | # Networking | ||
275 | # | ||
276 | CONFIG_NET=y | ||
277 | |||
278 | # | ||
279 | # Networking options | ||
280 | # | ||
281 | CONFIG_PACKET=y | ||
282 | # CONFIG_PACKET_MMAP is not set | ||
283 | CONFIG_UNIX=y | ||
284 | # CONFIG_NET_KEY is not set | ||
285 | CONFIG_INET=y | ||
286 | # CONFIG_IP_MULTICAST is not set | ||
287 | # CONFIG_IP_ADVANCED_ROUTER is not set | ||
288 | CONFIG_IP_FIB_HASH=y | ||
289 | CONFIG_IP_PNP=y | ||
290 | # CONFIG_IP_PNP_DHCP is not set | ||
291 | CONFIG_IP_PNP_BOOTP=y | ||
292 | CONFIG_IP_PNP_RARP=y | ||
293 | # CONFIG_NET_IPIP is not set | ||
294 | # CONFIG_NET_IPGRE is not set | ||
295 | # CONFIG_ARPD is not set | ||
296 | # CONFIG_SYN_COOKIES is not set | ||
297 | # CONFIG_INET_AH is not set | ||
298 | # CONFIG_INET_ESP is not set | ||
299 | # CONFIG_INET_IPCOMP is not set | ||
300 | # CONFIG_INET_XFRM_TUNNEL is not set | ||
301 | # CONFIG_INET_TUNNEL is not set | ||
302 | # CONFIG_INET_XFRM_MODE_TRANSPORT is not set | ||
303 | # CONFIG_INET_XFRM_MODE_TUNNEL is not set | ||
304 | # CONFIG_INET_XFRM_MODE_BEET is not set | ||
305 | # CONFIG_INET_LRO is not set | ||
306 | # CONFIG_INET_DIAG is not set | ||
307 | # CONFIG_TCP_CONG_ADVANCED is not set | ||
308 | CONFIG_TCP_CONG_CUBIC=y | ||
309 | CONFIG_DEFAULT_TCP_CONG="cubic" | ||
310 | # CONFIG_TCP_MD5SIG is not set | ||
311 | # CONFIG_IPV6 is not set | ||
312 | # CONFIG_INET6_XFRM_TUNNEL is not set | ||
313 | # CONFIG_INET6_TUNNEL is not set | ||
314 | # CONFIG_NETWORK_SECMARK is not set | ||
315 | # CONFIG_NETFILTER is not set | ||
316 | # CONFIG_IP_DCCP is not set | ||
317 | # CONFIG_IP_SCTP is not set | ||
318 | # CONFIG_TIPC is not set | ||
319 | # CONFIG_ATM is not set | ||
320 | # CONFIG_BRIDGE is not set | ||
321 | # CONFIG_VLAN_8021Q is not set | ||
322 | # CONFIG_DECNET is not set | ||
323 | # CONFIG_LLC2 is not set | ||
324 | # CONFIG_IPX is not set | ||
325 | # CONFIG_ATALK is not set | ||
326 | # CONFIG_X25 is not set | ||
327 | # CONFIG_LAPB is not set | ||
328 | # CONFIG_ECONET is not set | ||
329 | # CONFIG_WAN_ROUTER is not set | ||
330 | # CONFIG_NET_SCHED is not set | ||
331 | |||
332 | # | ||
333 | # Network testing | ||
334 | # | ||
335 | # CONFIG_NET_PKTGEN is not set | ||
336 | # CONFIG_HAMRADIO is not set | ||
337 | # CONFIG_IRDA is not set | ||
338 | # CONFIG_BT is not set | ||
339 | # CONFIG_AF_RXRPC is not set | ||
340 | |||
341 | # | ||
342 | # Wireless | ||
343 | # | ||
344 | # CONFIG_CFG80211 is not set | ||
345 | # CONFIG_WIRELESS_EXT is not set | ||
346 | # CONFIG_MAC80211 is not set | ||
347 | # CONFIG_IEEE80211 is not set | ||
348 | # CONFIG_RFKILL is not set | ||
349 | # CONFIG_NET_9P is not set | ||
350 | |||
351 | # | ||
352 | # Device Drivers | ||
353 | # | ||
354 | |||
355 | # | ||
356 | # Generic Driver Options | ||
357 | # | ||
358 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | ||
359 | CONFIG_STANDALONE=y | ||
360 | CONFIG_PREVENT_FIRMWARE_BUILD=y | ||
361 | # CONFIG_FW_LOADER is not set | ||
362 | # CONFIG_DEBUG_DRIVER is not set | ||
363 | # CONFIG_DEBUG_DEVRES is not set | ||
364 | # CONFIG_SYS_HYPERVISOR is not set | ||
365 | # CONFIG_CONNECTOR is not set | ||
366 | CONFIG_MTD=y | ||
367 | # CONFIG_MTD_DEBUG is not set | ||
368 | # CONFIG_MTD_CONCAT is not set | ||
369 | CONFIG_MTD_PARTITIONS=y | ||
370 | # CONFIG_MTD_REDBOOT_PARTS is not set | ||
371 | CONFIG_MTD_CMDLINE_PARTS=y | ||
372 | # CONFIG_MTD_AFS_PARTS is not set | ||
373 | |||
374 | # | ||
375 | # User Modules And Translation Layers | ||
376 | # | ||
377 | CONFIG_MTD_CHAR=y | ||
378 | CONFIG_MTD_BLKDEVS=y | ||
379 | CONFIG_MTD_BLOCK=y | ||
380 | # CONFIG_FTL is not set | ||
381 | # CONFIG_NFTL is not set | ||
382 | # CONFIG_INFTL is not set | ||
383 | # CONFIG_RFD_FTL is not set | ||
384 | # CONFIG_SSFDC is not set | ||
385 | # CONFIG_MTD_OOPS is not set | ||
386 | |||
387 | # | ||
388 | # RAM/ROM/Flash chip drivers | ||
389 | # | ||
390 | CONFIG_MTD_CFI=y | ||
391 | CONFIG_MTD_JEDECPROBE=y | ||
392 | CONFIG_MTD_GEN_PROBE=y | ||
393 | # CONFIG_MTD_CFI_ADV_OPTIONS is not set | ||
394 | CONFIG_MTD_MAP_BANK_WIDTH_1=y | ||
395 | CONFIG_MTD_MAP_BANK_WIDTH_2=y | ||
396 | CONFIG_MTD_MAP_BANK_WIDTH_4=y | ||
397 | # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set | ||
398 | # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set | ||
399 | # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set | ||
400 | CONFIG_MTD_CFI_I1=y | ||
401 | CONFIG_MTD_CFI_I2=y | ||
402 | # CONFIG_MTD_CFI_I4 is not set | ||
403 | # CONFIG_MTD_CFI_I8 is not set | ||
404 | # CONFIG_MTD_CFI_INTELEXT is not set | ||
405 | CONFIG_MTD_CFI_AMDSTD=y | ||
406 | # CONFIG_MTD_CFI_STAA is not set | ||
407 | CONFIG_MTD_CFI_UTIL=y | ||
408 | # CONFIG_MTD_RAM is not set | ||
409 | # CONFIG_MTD_ROM is not set | ||
410 | # CONFIG_MTD_ABSENT is not set | ||
411 | |||
412 | # | ||
413 | # Mapping drivers for chip access | ||
414 | # | ||
415 | # CONFIG_MTD_COMPLEX_MAPPINGS is not set | ||
416 | CONFIG_MTD_PHYSMAP=y | ||
417 | CONFIG_MTD_PHYSMAP_START=0x0 | ||
418 | CONFIG_MTD_PHYSMAP_LEN=0x0 | ||
419 | CONFIG_MTD_PHYSMAP_BANKWIDTH=0 | ||
420 | # CONFIG_MTD_ARM_INTEGRATOR is not set | ||
421 | # CONFIG_MTD_IMPA7 is not set | ||
422 | # CONFIG_MTD_PLATRAM is not set | ||
423 | |||
424 | # | ||
425 | # Self-contained MTD device drivers | ||
426 | # | ||
427 | CONFIG_MTD_DATAFLASH=y | ||
428 | # CONFIG_MTD_M25P80 is not set | ||
429 | # CONFIG_MTD_SLRAM is not set | ||
430 | # CONFIG_MTD_PHRAM is not set | ||
431 | # CONFIG_MTD_MTDRAM is not set | ||
432 | # CONFIG_MTD_BLOCK2MTD is not set | ||
433 | |||
434 | # | ||
435 | # Disk-On-Chip Device Drivers | ||
436 | # | ||
437 | # CONFIG_MTD_DOC2000 is not set | ||
438 | # CONFIG_MTD_DOC2001 is not set | ||
439 | # CONFIG_MTD_DOC2001PLUS is not set | ||
440 | CONFIG_MTD_NAND=y | ||
441 | # CONFIG_MTD_NAND_VERIFY_WRITE is not set | ||
442 | # CONFIG_MTD_NAND_ECC_SMC is not set | ||
443 | # CONFIG_MTD_NAND_MUSEUM_IDS is not set | ||
444 | CONFIG_MTD_NAND_IDS=y | ||
445 | # CONFIG_MTD_NAND_DISKONCHIP is not set | ||
446 | CONFIG_MTD_NAND_AT91=y | ||
447 | # CONFIG_MTD_NAND_NANDSIM is not set | ||
448 | # CONFIG_MTD_NAND_PLATFORM is not set | ||
449 | # CONFIG_MTD_ALAUDA is not set | ||
450 | # CONFIG_MTD_ONENAND is not set | ||
451 | |||
452 | # | ||
453 | # UBI - Unsorted block images | ||
454 | # | ||
455 | # CONFIG_MTD_UBI is not set | ||
456 | # CONFIG_PARPORT is not set | ||
457 | CONFIG_BLK_DEV=y | ||
458 | # CONFIG_BLK_DEV_COW_COMMON is not set | ||
459 | CONFIG_BLK_DEV_LOOP=y | ||
460 | # CONFIG_BLK_DEV_CRYPTOLOOP is not set | ||
461 | # CONFIG_BLK_DEV_NBD is not set | ||
462 | # CONFIG_BLK_DEV_UB is not set | ||
463 | CONFIG_BLK_DEV_RAM=y | ||
464 | CONFIG_BLK_DEV_RAM_COUNT=16 | ||
465 | CONFIG_BLK_DEV_RAM_SIZE=8192 | ||
466 | CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 | ||
467 | # CONFIG_CDROM_PKTCDVD is not set | ||
468 | # CONFIG_ATA_OVER_ETH is not set | ||
469 | CONFIG_MISC_DEVICES=y | ||
470 | # CONFIG_EEPROM_93CX6 is not set | ||
471 | CONFIG_ATMEL_SSC=y | ||
472 | |||
473 | # | ||
474 | # SCSI device support | ||
475 | # | ||
476 | # CONFIG_RAID_ATTRS is not set | ||
477 | CONFIG_SCSI=y | ||
478 | CONFIG_SCSI_DMA=y | ||
479 | # CONFIG_SCSI_TGT is not set | ||
480 | # CONFIG_SCSI_NETLINK is not set | ||
481 | CONFIG_SCSI_PROC_FS=y | ||
482 | |||
483 | # | ||
484 | # SCSI support type (disk, tape, CD-ROM) | ||
485 | # | ||
486 | CONFIG_BLK_DEV_SD=y | ||
487 | # CONFIG_CHR_DEV_ST is not set | ||
488 | # CONFIG_CHR_DEV_OSST is not set | ||
489 | # CONFIG_BLK_DEV_SR is not set | ||
490 | # CONFIG_CHR_DEV_SG is not set | ||
491 | # CONFIG_CHR_DEV_SCH is not set | ||
492 | |||
493 | # | ||
494 | # Some SCSI devices (e.g. CD jukebox) support multiple LUNs | ||
495 | # | ||
496 | CONFIG_SCSI_MULTI_LUN=y | ||
497 | # CONFIG_SCSI_CONSTANTS is not set | ||
498 | # CONFIG_SCSI_LOGGING is not set | ||
499 | # CONFIG_SCSI_SCAN_ASYNC is not set | ||
500 | CONFIG_SCSI_WAIT_SCAN=m | ||
501 | |||
502 | # | ||
503 | # SCSI Transports | ||
504 | # | ||
505 | # CONFIG_SCSI_SPI_ATTRS is not set | ||
506 | # CONFIG_SCSI_FC_ATTRS is not set | ||
507 | # CONFIG_SCSI_ISCSI_ATTRS is not set | ||
508 | # CONFIG_SCSI_SAS_LIBSAS is not set | ||
509 | # CONFIG_SCSI_SRP_ATTRS is not set | ||
510 | CONFIG_SCSI_LOWLEVEL=y | ||
511 | # CONFIG_ISCSI_TCP is not set | ||
512 | # CONFIG_SCSI_DEBUG is not set | ||
513 | # CONFIG_ATA is not set | ||
514 | # CONFIG_MD is not set | ||
515 | CONFIG_NETDEVICES=y | ||
516 | # CONFIG_NETDEVICES_MULTIQUEUE is not set | ||
517 | # CONFIG_DUMMY is not set | ||
518 | # CONFIG_BONDING is not set | ||
519 | # CONFIG_MACVLAN is not set | ||
520 | # CONFIG_EQUALIZER is not set | ||
521 | # CONFIG_TUN is not set | ||
522 | # CONFIG_VETH is not set | ||
523 | CONFIG_PHYLIB=y | ||
524 | |||
525 | # | ||
526 | # MII PHY device drivers | ||
527 | # | ||
528 | # CONFIG_MARVELL_PHY is not set | ||
529 | # CONFIG_DAVICOM_PHY is not set | ||
530 | # CONFIG_QSEMI_PHY is not set | ||
531 | # CONFIG_LXT_PHY is not set | ||
532 | # CONFIG_CICADA_PHY is not set | ||
533 | # CONFIG_VITESSE_PHY is not set | ||
534 | # CONFIG_SMSC_PHY is not set | ||
535 | # CONFIG_BROADCOM_PHY is not set | ||
536 | # CONFIG_ICPLUS_PHY is not set | ||
537 | # CONFIG_FIXED_PHY is not set | ||
538 | # CONFIG_MDIO_BITBANG is not set | ||
539 | CONFIG_NET_ETHERNET=y | ||
540 | CONFIG_MII=y | ||
541 | CONFIG_MACB=y | ||
542 | # CONFIG_AX88796 is not set | ||
543 | # CONFIG_SMC91X is not set | ||
544 | # CONFIG_DM9000 is not set | ||
545 | # CONFIG_IBM_NEW_EMAC_ZMII is not set | ||
546 | # CONFIG_IBM_NEW_EMAC_RGMII is not set | ||
547 | # CONFIG_IBM_NEW_EMAC_TAH is not set | ||
548 | # CONFIG_IBM_NEW_EMAC_EMAC4 is not set | ||
549 | # CONFIG_B44 is not set | ||
550 | # CONFIG_NETDEV_1000 is not set | ||
551 | # CONFIG_NETDEV_10000 is not set | ||
552 | |||
553 | # | ||
554 | # Wireless LAN | ||
555 | # | ||
556 | # CONFIG_WLAN_PRE80211 is not set | ||
557 | # CONFIG_WLAN_80211 is not set | ||
558 | |||
559 | # | ||
560 | # USB Network Adapters | ||
561 | # | ||
562 | # CONFIG_USB_CATC is not set | ||
563 | # CONFIG_USB_KAWETH is not set | ||
564 | # CONFIG_USB_PEGASUS is not set | ||
565 | # CONFIG_USB_RTL8150 is not set | ||
566 | # CONFIG_USB_USBNET is not set | ||
567 | # CONFIG_WAN is not set | ||
568 | # CONFIG_PPP is not set | ||
569 | # CONFIG_SLIP is not set | ||
570 | # CONFIG_SHAPER is not set | ||
571 | # CONFIG_NETCONSOLE is not set | ||
572 | # CONFIG_NETPOLL is not set | ||
573 | # CONFIG_NET_POLL_CONTROLLER is not set | ||
574 | # CONFIG_ISDN is not set | ||
575 | |||
576 | # | ||
577 | # Input device support | ||
578 | # | ||
579 | CONFIG_INPUT=y | ||
580 | # CONFIG_INPUT_FF_MEMLESS is not set | ||
581 | # CONFIG_INPUT_POLLDEV is not set | ||
582 | |||
583 | # | ||
584 | # Userland interfaces | ||
585 | # | ||
586 | CONFIG_INPUT_MOUSEDEV=y | ||
587 | # CONFIG_INPUT_MOUSEDEV_PSAUX is not set | ||
588 | CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 | ||
589 | CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 | ||
590 | # CONFIG_INPUT_JOYDEV is not set | ||
591 | CONFIG_INPUT_EVDEV=y | ||
592 | # CONFIG_INPUT_EVBUG is not set | ||
593 | |||
594 | # | ||
595 | # Input Device Drivers | ||
596 | # | ||
597 | # CONFIG_INPUT_KEYBOARD is not set | ||
598 | # CONFIG_INPUT_MOUSE is not set | ||
599 | # CONFIG_INPUT_JOYSTICK is not set | ||
600 | # CONFIG_INPUT_TABLET is not set | ||
601 | CONFIG_INPUT_TOUCHSCREEN=y | ||
602 | CONFIG_TOUCHSCREEN_ADS7846=y | ||
603 | # CONFIG_TOUCHSCREEN_FUJITSU is not set | ||
604 | # CONFIG_TOUCHSCREEN_GUNZE is not set | ||
605 | # CONFIG_TOUCHSCREEN_ELO is not set | ||
606 | # CONFIG_TOUCHSCREEN_MTOUCH is not set | ||
607 | # CONFIG_TOUCHSCREEN_MK712 is not set | ||
608 | # CONFIG_TOUCHSCREEN_PENMOUNT is not set | ||
609 | # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set | ||
610 | # CONFIG_TOUCHSCREEN_TOUCHWIN is not set | ||
611 | # CONFIG_TOUCHSCREEN_UCB1400 is not set | ||
612 | # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set | ||
613 | # CONFIG_INPUT_MISC is not set | ||
614 | |||
615 | # | ||
616 | # Hardware I/O ports | ||
617 | # | ||
618 | # CONFIG_SERIO is not set | ||
619 | # CONFIG_GAMEPORT is not set | ||
620 | |||
621 | # | ||
622 | # Character devices | ||
623 | # | ||
624 | CONFIG_VT=y | ||
625 | CONFIG_VT_CONSOLE=y | ||
626 | CONFIG_HW_CONSOLE=y | ||
627 | # CONFIG_VT_HW_CONSOLE_BINDING is not set | ||
628 | # CONFIG_SERIAL_NONSTANDARD is not set | ||
629 | |||
630 | # | ||
631 | # Serial drivers | ||
632 | # | ||
633 | # CONFIG_SERIAL_8250 is not set | ||
634 | |||
635 | # | ||
636 | # Non-8250 serial port support | ||
637 | # | ||
638 | CONFIG_SERIAL_ATMEL=y | ||
639 | CONFIG_SERIAL_ATMEL_CONSOLE=y | ||
640 | # CONFIG_SERIAL_ATMEL_TTYAT is not set | ||
641 | CONFIG_SERIAL_CORE=y | ||
642 | CONFIG_SERIAL_CORE_CONSOLE=y | ||
643 | CONFIG_UNIX98_PTYS=y | ||
644 | CONFIG_LEGACY_PTYS=y | ||
645 | CONFIG_LEGACY_PTY_COUNT=256 | ||
646 | # CONFIG_IPMI_HANDLER is not set | ||
647 | CONFIG_HW_RANDOM=y | ||
648 | # CONFIG_NVRAM is not set | ||
649 | # CONFIG_R3964 is not set | ||
650 | # CONFIG_RAW_DRIVER is not set | ||
651 | # CONFIG_TCG_TPM is not set | ||
652 | CONFIG_I2C=y | ||
653 | CONFIG_I2C_BOARDINFO=y | ||
654 | CONFIG_I2C_CHARDEV=y | ||
655 | |||
656 | # | ||
657 | # I2C Algorithms | ||
658 | # | ||
659 | # CONFIG_I2C_ALGOBIT is not set | ||
660 | # CONFIG_I2C_ALGOPCF is not set | ||
661 | # CONFIG_I2C_ALGOPCA is not set | ||
662 | |||
663 | # | ||
664 | # I2C Hardware Bus support | ||
665 | # | ||
666 | # CONFIG_I2C_GPIO is not set | ||
667 | # CONFIG_I2C_OCORES is not set | ||
668 | # CONFIG_I2C_PARPORT_LIGHT is not set | ||
669 | # CONFIG_I2C_SIMTEC is not set | ||
670 | # CONFIG_I2C_TAOS_EVM is not set | ||
671 | # CONFIG_I2C_STUB is not set | ||
672 | # CONFIG_I2C_TINY_USB is not set | ||
673 | |||
674 | # | ||
675 | # Miscellaneous I2C Chip support | ||
676 | # | ||
677 | # CONFIG_SENSORS_DS1337 is not set | ||
678 | # CONFIG_SENSORS_DS1374 is not set | ||
679 | # CONFIG_DS1682 is not set | ||
680 | # CONFIG_SENSORS_EEPROM is not set | ||
681 | # CONFIG_SENSORS_PCF8574 is not set | ||
682 | # CONFIG_SENSORS_PCA9539 is not set | ||
683 | # CONFIG_SENSORS_PCF8591 is not set | ||
684 | # CONFIG_SENSORS_MAX6875 is not set | ||
685 | # CONFIG_SENSORS_TSL2550 is not set | ||
686 | # CONFIG_I2C_DEBUG_CORE is not set | ||
687 | # CONFIG_I2C_DEBUG_ALGO is not set | ||
688 | # CONFIG_I2C_DEBUG_BUS is not set | ||
689 | # CONFIG_I2C_DEBUG_CHIP is not set | ||
690 | |||
691 | # | ||
692 | # SPI support | ||
693 | # | ||
694 | CONFIG_SPI=y | ||
695 | # CONFIG_SPI_DEBUG is not set | ||
696 | CONFIG_SPI_MASTER=y | ||
697 | |||
698 | # | ||
699 | # SPI Master Controller Drivers | ||
700 | # | ||
701 | CONFIG_SPI_ATMEL=y | ||
702 | # CONFIG_SPI_BITBANG is not set | ||
703 | |||
704 | # | ||
705 | # SPI Protocol Masters | ||
706 | # | ||
707 | # CONFIG_SPI_AT25 is not set | ||
708 | # CONFIG_SPI_SPIDEV is not set | ||
709 | # CONFIG_SPI_TLE62X0 is not set | ||
710 | # CONFIG_W1 is not set | ||
711 | # CONFIG_POWER_SUPPLY is not set | ||
712 | # CONFIG_HWMON is not set | ||
713 | CONFIG_WATCHDOG=y | ||
714 | CONFIG_WATCHDOG_NOWAYOUT=y | ||
715 | |||
716 | # | ||
717 | # Watchdog Device Drivers | ||
718 | # | ||
719 | # CONFIG_SOFT_WATCHDOG is not set | ||
720 | |||
721 | # | ||
722 | # USB-based Watchdog Cards | ||
723 | # | ||
724 | # CONFIG_USBPCWATCHDOG is not set | ||
725 | |||
726 | # | ||
727 | # Sonics Silicon Backplane | ||
728 | # | ||
729 | CONFIG_SSB_POSSIBLE=y | ||
730 | # CONFIG_SSB is not set | ||
731 | |||
732 | # | ||
733 | # Multifunction device drivers | ||
734 | # | ||
735 | # CONFIG_MFD_SM501 is not set | ||
736 | |||
737 | # | ||
738 | # Multimedia devices | ||
739 | # | ||
740 | # CONFIG_VIDEO_DEV is not set | ||
741 | # CONFIG_DVB_CORE is not set | ||
742 | # CONFIG_DAB is not set | ||
743 | |||
744 | # | ||
745 | # Graphics support | ||
746 | # | ||
747 | # CONFIG_VGASTATE is not set | ||
748 | # CONFIG_VIDEO_OUTPUT_CONTROL is not set | ||
749 | CONFIG_FB=y | ||
750 | # CONFIG_FIRMWARE_EDID is not set | ||
751 | # CONFIG_FB_DDC is not set | ||
752 | CONFIG_FB_CFB_FILLRECT=y | ||
753 | CONFIG_FB_CFB_COPYAREA=y | ||
754 | CONFIG_FB_CFB_IMAGEBLIT=y | ||
755 | # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set | ||
756 | # CONFIG_FB_SYS_FILLRECT is not set | ||
757 | # CONFIG_FB_SYS_COPYAREA is not set | ||
758 | # CONFIG_FB_SYS_IMAGEBLIT is not set | ||
759 | # CONFIG_FB_SYS_FOPS is not set | ||
760 | CONFIG_FB_DEFERRED_IO=y | ||
761 | # CONFIG_FB_SVGALIB is not set | ||
762 | # CONFIG_FB_MACMODES is not set | ||
763 | # CONFIG_FB_BACKLIGHT is not set | ||
764 | # CONFIG_FB_MODE_HELPERS is not set | ||
765 | # CONFIG_FB_TILEBLITTING is not set | ||
766 | |||
767 | # | ||
768 | # Frame buffer hardware drivers | ||
769 | # | ||
770 | # CONFIG_FB_S1D13XXX is not set | ||
771 | CONFIG_FB_ATMEL=y | ||
772 | # CONFIG_FB_VIRTUAL is not set | ||
773 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set | ||
774 | |||
775 | # | ||
776 | # Display device support | ||
777 | # | ||
778 | # CONFIG_DISPLAY_SUPPORT is not set | ||
779 | |||
780 | # | ||
781 | # Console display driver support | ||
782 | # | ||
783 | # CONFIG_VGA_CONSOLE is not set | ||
784 | CONFIG_DUMMY_CONSOLE=y | ||
785 | # CONFIG_FRAMEBUFFER_CONSOLE is not set | ||
786 | CONFIG_LOGO=y | ||
787 | # CONFIG_LOGO_LINUX_MONO is not set | ||
788 | CONFIG_LOGO_LINUX_VGA16=y | ||
789 | # CONFIG_LOGO_LINUX_CLUT224 is not set | ||
790 | |||
791 | # | ||
792 | # Sound | ||
793 | # | ||
794 | # CONFIG_SOUND is not set | ||
795 | CONFIG_HID_SUPPORT=y | ||
796 | CONFIG_HID=y | ||
797 | CONFIG_HID_DEBUG=y | ||
798 | # CONFIG_HIDRAW is not set | ||
799 | |||
800 | # | ||
801 | # USB Input Devices | ||
802 | # | ||
803 | # CONFIG_USB_HID is not set | ||
804 | |||
805 | # | ||
806 | # USB HID Boot Protocol drivers | ||
807 | # | ||
808 | # CONFIG_USB_KBD is not set | ||
809 | # CONFIG_USB_MOUSE is not set | ||
810 | CONFIG_USB_SUPPORT=y | ||
811 | CONFIG_USB_ARCH_HAS_HCD=y | ||
812 | CONFIG_USB_ARCH_HAS_OHCI=y | ||
813 | # CONFIG_USB_ARCH_HAS_EHCI is not set | ||
814 | CONFIG_USB=y | ||
815 | # CONFIG_USB_DEBUG is not set | ||
816 | |||
817 | # | ||
818 | # Miscellaneous USB options | ||
819 | # | ||
820 | CONFIG_USB_DEVICEFS=y | ||
821 | CONFIG_USB_DEVICE_CLASS=y | ||
822 | # CONFIG_USB_DYNAMIC_MINORS is not set | ||
823 | # CONFIG_USB_OTG is not set | ||
824 | |||
825 | # | ||
826 | # USB Host Controller Drivers | ||
827 | # | ||
828 | # CONFIG_USB_ISP116X_HCD is not set | ||
829 | CONFIG_USB_OHCI_HCD=y | ||
830 | # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set | ||
831 | # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set | ||
832 | CONFIG_USB_OHCI_LITTLE_ENDIAN=y | ||
833 | # CONFIG_USB_SL811_HCD is not set | ||
834 | # CONFIG_USB_R8A66597_HCD is not set | ||
835 | |||
836 | # | ||
837 | # USB Device Class drivers | ||
838 | # | ||
839 | # CONFIG_USB_ACM is not set | ||
840 | # CONFIG_USB_PRINTER is not set | ||
841 | |||
842 | # | ||
843 | # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' | ||
844 | # | ||
845 | |||
846 | # | ||
847 | # may also be needed; see USB_STORAGE Help for more information | ||
848 | # | ||
849 | CONFIG_USB_STORAGE=y | ||
850 | # CONFIG_USB_STORAGE_DEBUG is not set | ||
851 | # CONFIG_USB_STORAGE_DATAFAB is not set | ||
852 | # CONFIG_USB_STORAGE_FREECOM is not set | ||
853 | # CONFIG_USB_STORAGE_ISD200 is not set | ||
854 | # CONFIG_USB_STORAGE_DPCM is not set | ||
855 | # CONFIG_USB_STORAGE_USBAT is not set | ||
856 | # CONFIG_USB_STORAGE_SDDR09 is not set | ||
857 | # CONFIG_USB_STORAGE_SDDR55 is not set | ||
858 | # CONFIG_USB_STORAGE_JUMPSHOT is not set | ||
859 | # CONFIG_USB_STORAGE_ALAUDA is not set | ||
860 | # CONFIG_USB_STORAGE_ONETOUCH is not set | ||
861 | # CONFIG_USB_STORAGE_KARMA is not set | ||
862 | # CONFIG_USB_LIBUSUAL is not set | ||
863 | |||
864 | # | ||
865 | # USB Imaging devices | ||
866 | # | ||
867 | # CONFIG_USB_MDC800 is not set | ||
868 | # CONFIG_USB_MICROTEK is not set | ||
869 | CONFIG_USB_MON=y | ||
870 | |||
871 | # | ||
872 | # USB port drivers | ||
873 | # | ||
874 | |||
875 | # | ||
876 | # USB Serial Converter support | ||
877 | # | ||
878 | # CONFIG_USB_SERIAL is not set | ||
879 | |||
880 | # | ||
881 | # USB Miscellaneous drivers | ||
882 | # | ||
883 | # CONFIG_USB_EMI62 is not set | ||
884 | # CONFIG_USB_EMI26 is not set | ||
885 | # CONFIG_USB_ADUTUX is not set | ||
886 | # CONFIG_USB_AUERSWALD is not set | ||
887 | # CONFIG_USB_RIO500 is not set | ||
888 | # CONFIG_USB_LEGOTOWER is not set | ||
889 | # CONFIG_USB_LCD is not set | ||
890 | # CONFIG_USB_BERRY_CHARGE is not set | ||
891 | # CONFIG_USB_LED is not set | ||
892 | # CONFIG_USB_CYPRESS_CY7C63 is not set | ||
893 | # CONFIG_USB_CYTHERM is not set | ||
894 | # CONFIG_USB_PHIDGET is not set | ||
895 | # CONFIG_USB_IDMOUSE is not set | ||
896 | # CONFIG_USB_FTDI_ELAN is not set | ||
897 | # CONFIG_USB_APPLEDISPLAY is not set | ||
898 | # CONFIG_USB_LD is not set | ||
899 | # CONFIG_USB_TRANCEVIBRATOR is not set | ||
900 | # CONFIG_USB_IOWARRIOR is not set | ||
901 | # CONFIG_USB_TEST is not set | ||
902 | |||
903 | # | ||
904 | # USB DSL modem support | ||
905 | # | ||
906 | |||
907 | # | ||
908 | # USB Gadget Support | ||
909 | # | ||
910 | # CONFIG_USB_GADGET is not set | ||
911 | CONFIG_MMC=y | ||
912 | # CONFIG_MMC_DEBUG is not set | ||
913 | # CONFIG_MMC_UNSAFE_RESUME is not set | ||
914 | |||
915 | # | ||
916 | # MMC/SD Card Drivers | ||
917 | # | ||
918 | CONFIG_MMC_BLOCK=y | ||
919 | CONFIG_MMC_BLOCK_BOUNCE=y | ||
920 | # CONFIG_SDIO_UART is not set | ||
921 | |||
922 | # | ||
923 | # MMC/SD Host Controller Drivers | ||
924 | # | ||
925 | CONFIG_MMC_AT91=y | ||
926 | # CONFIG_MMC_SPI is not set | ||
927 | # CONFIG_NEW_LEDS is not set | ||
928 | CONFIG_RTC_LIB=y | ||
929 | # CONFIG_RTC_CLASS is not set | ||
930 | |||
931 | # | ||
932 | # File systems | ||
933 | # | ||
934 | CONFIG_EXT2_FS=y | ||
935 | # CONFIG_EXT2_FS_XATTR is not set | ||
936 | # CONFIG_EXT2_FS_XIP is not set | ||
937 | # CONFIG_EXT3_FS is not set | ||
938 | # CONFIG_EXT4DEV_FS is not set | ||
939 | # CONFIG_REISERFS_FS is not set | ||
940 | # CONFIG_JFS_FS is not set | ||
941 | # CONFIG_FS_POSIX_ACL is not set | ||
942 | # CONFIG_XFS_FS is not set | ||
943 | # CONFIG_GFS2_FS is not set | ||
944 | # CONFIG_OCFS2_FS is not set | ||
945 | # CONFIG_MINIX_FS is not set | ||
946 | # CONFIG_ROMFS_FS is not set | ||
947 | CONFIG_INOTIFY=y | ||
948 | CONFIG_INOTIFY_USER=y | ||
949 | # CONFIG_QUOTA is not set | ||
950 | CONFIG_DNOTIFY=y | ||
951 | # CONFIG_AUTOFS_FS is not set | ||
952 | # CONFIG_AUTOFS4_FS is not set | ||
953 | # CONFIG_FUSE_FS is not set | ||
954 | |||
955 | # | ||
956 | # CD-ROM/DVD Filesystems | ||
957 | # | ||
958 | # CONFIG_ISO9660_FS is not set | ||
959 | # CONFIG_UDF_FS is not set | ||
960 | |||
961 | # | ||
962 | # DOS/FAT/NT Filesystems | ||
963 | # | ||
964 | CONFIG_FAT_FS=y | ||
965 | # CONFIG_MSDOS_FS is not set | ||
966 | CONFIG_VFAT_FS=y | ||
967 | CONFIG_FAT_DEFAULT_CODEPAGE=437 | ||
968 | CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" | ||
969 | # CONFIG_NTFS_FS is not set | ||
970 | |||
971 | # | ||
972 | # Pseudo filesystems | ||
973 | # | ||
974 | CONFIG_PROC_FS=y | ||
975 | CONFIG_PROC_SYSCTL=y | ||
976 | CONFIG_SYSFS=y | ||
977 | CONFIG_TMPFS=y | ||
978 | # CONFIG_TMPFS_POSIX_ACL is not set | ||
979 | # CONFIG_HUGETLB_PAGE is not set | ||
980 | # CONFIG_CONFIGFS_FS is not set | ||
981 | |||
982 | # | ||
983 | # Miscellaneous filesystems | ||
984 | # | ||
985 | # CONFIG_ADFS_FS is not set | ||
986 | # CONFIG_AFFS_FS is not set | ||
987 | # CONFIG_HFS_FS is not set | ||
988 | # CONFIG_HFSPLUS_FS is not set | ||
989 | # CONFIG_BEFS_FS is not set | ||
990 | # CONFIG_BFS_FS is not set | ||
991 | # CONFIG_EFS_FS is not set | ||
992 | CONFIG_JFFS2_FS=y | ||
993 | CONFIG_JFFS2_FS_DEBUG=0 | ||
994 | CONFIG_JFFS2_FS_WRITEBUFFER=y | ||
995 | # CONFIG_JFFS2_FS_WBUF_VERIFY is not set | ||
996 | # CONFIG_JFFS2_SUMMARY is not set | ||
997 | # CONFIG_JFFS2_FS_XATTR is not set | ||
998 | # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set | ||
999 | CONFIG_JFFS2_ZLIB=y | ||
1000 | # CONFIG_JFFS2_LZO is not set | ||
1001 | CONFIG_JFFS2_RTIME=y | ||
1002 | # CONFIG_JFFS2_RUBIN is not set | ||
1003 | CONFIG_CRAMFS=y | ||
1004 | # CONFIG_VXFS_FS is not set | ||
1005 | # CONFIG_HPFS_FS is not set | ||
1006 | # CONFIG_QNX4FS_FS is not set | ||
1007 | # CONFIG_SYSV_FS is not set | ||
1008 | # CONFIG_UFS_FS is not set | ||
1009 | CONFIG_NETWORK_FILESYSTEMS=y | ||
1010 | CONFIG_NFS_FS=y | ||
1011 | # CONFIG_NFS_V3 is not set | ||
1012 | # CONFIG_NFS_V4 is not set | ||
1013 | # CONFIG_NFS_DIRECTIO is not set | ||
1014 | # CONFIG_NFSD is not set | ||
1015 | CONFIG_ROOT_NFS=y | ||
1016 | CONFIG_LOCKD=y | ||
1017 | CONFIG_NFS_COMMON=y | ||
1018 | CONFIG_SUNRPC=y | ||
1019 | # CONFIG_SUNRPC_BIND34 is not set | ||
1020 | # CONFIG_RPCSEC_GSS_KRB5 is not set | ||
1021 | # CONFIG_RPCSEC_GSS_SPKM3 is not set | ||
1022 | # CONFIG_SMB_FS is not set | ||
1023 | # CONFIG_CIFS is not set | ||
1024 | # CONFIG_NCP_FS is not set | ||
1025 | # CONFIG_CODA_FS is not set | ||
1026 | # CONFIG_AFS_FS is not set | ||
1027 | |||
1028 | # | ||
1029 | # Partition Types | ||
1030 | # | ||
1031 | # CONFIG_PARTITION_ADVANCED is not set | ||
1032 | CONFIG_MSDOS_PARTITION=y | ||
1033 | CONFIG_NLS=y | ||
1034 | CONFIG_NLS_DEFAULT="iso8859-1" | ||
1035 | CONFIG_NLS_CODEPAGE_437=y | ||
1036 | # CONFIG_NLS_CODEPAGE_737 is not set | ||
1037 | # CONFIG_NLS_CODEPAGE_775 is not set | ||
1038 | CONFIG_NLS_CODEPAGE_850=y | ||
1039 | # CONFIG_NLS_CODEPAGE_852 is not set | ||
1040 | # CONFIG_NLS_CODEPAGE_855 is not set | ||
1041 | # CONFIG_NLS_CODEPAGE_857 is not set | ||
1042 | # CONFIG_NLS_CODEPAGE_860 is not set | ||
1043 | # CONFIG_NLS_CODEPAGE_861 is not set | ||
1044 | # CONFIG_NLS_CODEPAGE_862 is not set | ||
1045 | # CONFIG_NLS_CODEPAGE_863 is not set | ||
1046 | # CONFIG_NLS_CODEPAGE_864 is not set | ||
1047 | # CONFIG_NLS_CODEPAGE_865 is not set | ||
1048 | # CONFIG_NLS_CODEPAGE_866 is not set | ||
1049 | # CONFIG_NLS_CODEPAGE_869 is not set | ||
1050 | # CONFIG_NLS_CODEPAGE_936 is not set | ||
1051 | # CONFIG_NLS_CODEPAGE_950 is not set | ||
1052 | # CONFIG_NLS_CODEPAGE_932 is not set | ||
1053 | # CONFIG_NLS_CODEPAGE_949 is not set | ||
1054 | # CONFIG_NLS_CODEPAGE_874 is not set | ||
1055 | # CONFIG_NLS_ISO8859_8 is not set | ||
1056 | # CONFIG_NLS_CODEPAGE_1250 is not set | ||
1057 | # CONFIG_NLS_CODEPAGE_1251 is not set | ||
1058 | # CONFIG_NLS_ASCII is not set | ||
1059 | CONFIG_NLS_ISO8859_1=y | ||
1060 | # CONFIG_NLS_ISO8859_2 is not set | ||
1061 | # CONFIG_NLS_ISO8859_3 is not set | ||
1062 | # CONFIG_NLS_ISO8859_4 is not set | ||
1063 | # CONFIG_NLS_ISO8859_5 is not set | ||
1064 | # CONFIG_NLS_ISO8859_6 is not set | ||
1065 | # CONFIG_NLS_ISO8859_7 is not set | ||
1066 | # CONFIG_NLS_ISO8859_9 is not set | ||
1067 | # CONFIG_NLS_ISO8859_13 is not set | ||
1068 | # CONFIG_NLS_ISO8859_14 is not set | ||
1069 | # CONFIG_NLS_ISO8859_15 is not set | ||
1070 | # CONFIG_NLS_KOI8_R is not set | ||
1071 | # CONFIG_NLS_KOI8_U is not set | ||
1072 | # CONFIG_NLS_UTF8 is not set | ||
1073 | # CONFIG_DLM is not set | ||
1074 | CONFIG_INSTRUMENTATION=y | ||
1075 | # CONFIG_PROFILING is not set | ||
1076 | # CONFIG_MARKERS is not set | ||
1077 | |||
1078 | # | ||
1079 | # Kernel hacking | ||
1080 | # | ||
1081 | # CONFIG_PRINTK_TIME is not set | ||
1082 | CONFIG_ENABLE_WARN_DEPRECATED=y | ||
1083 | CONFIG_ENABLE_MUST_CHECK=y | ||
1084 | # CONFIG_MAGIC_SYSRQ is not set | ||
1085 | # CONFIG_UNUSED_SYMBOLS is not set | ||
1086 | CONFIG_DEBUG_FS=y | ||
1087 | # CONFIG_HEADERS_CHECK is not set | ||
1088 | CONFIG_DEBUG_KERNEL=y | ||
1089 | # CONFIG_DEBUG_SHIRQ is not set | ||
1090 | CONFIG_DETECT_SOFTLOCKUP=y | ||
1091 | CONFIG_SCHED_DEBUG=y | ||
1092 | # CONFIG_SCHEDSTATS is not set | ||
1093 | # CONFIG_TIMER_STATS is not set | ||
1094 | # CONFIG_DEBUG_SLAB is not set | ||
1095 | # CONFIG_DEBUG_RT_MUTEXES is not set | ||
1096 | # CONFIG_RT_MUTEX_TESTER is not set | ||
1097 | # CONFIG_DEBUG_SPINLOCK is not set | ||
1098 | # CONFIG_DEBUG_MUTEXES is not set | ||
1099 | # CONFIG_DEBUG_LOCK_ALLOC is not set | ||
1100 | # CONFIG_PROVE_LOCKING is not set | ||
1101 | # CONFIG_LOCK_STAT is not set | ||
1102 | # CONFIG_DEBUG_SPINLOCK_SLEEP is not set | ||
1103 | # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set | ||
1104 | # CONFIG_DEBUG_KOBJECT is not set | ||
1105 | CONFIG_DEBUG_BUGVERBOSE=y | ||
1106 | CONFIG_DEBUG_INFO=y | ||
1107 | # CONFIG_DEBUG_VM is not set | ||
1108 | # CONFIG_DEBUG_LIST is not set | ||
1109 | # CONFIG_DEBUG_SG is not set | ||
1110 | CONFIG_FRAME_POINTER=y | ||
1111 | CONFIG_FORCED_INLINING=y | ||
1112 | # CONFIG_BOOT_PRINTK_DELAY is not set | ||
1113 | # CONFIG_RCU_TORTURE_TEST is not set | ||
1114 | # CONFIG_FAULT_INJECTION is not set | ||
1115 | # CONFIG_SAMPLES is not set | ||
1116 | CONFIG_DEBUG_USER=y | ||
1117 | # CONFIG_DEBUG_ERRORS is not set | ||
1118 | # CONFIG_DEBUG_LL is not set | ||
1119 | |||
1120 | # | ||
1121 | # Security options | ||
1122 | # | ||
1123 | # CONFIG_KEYS is not set | ||
1124 | # CONFIG_SECURITY is not set | ||
1125 | # CONFIG_SECURITY_FILE_CAPABILITIES is not set | ||
1126 | # CONFIG_CRYPTO is not set | ||
1127 | |||
1128 | # | ||
1129 | # Library routines | ||
1130 | # | ||
1131 | CONFIG_BITREVERSE=y | ||
1132 | # CONFIG_CRC_CCITT is not set | ||
1133 | # CONFIG_CRC16 is not set | ||
1134 | # CONFIG_CRC_ITU_T is not set | ||
1135 | CONFIG_CRC32=y | ||
1136 | # CONFIG_CRC7 is not set | ||
1137 | # CONFIG_LIBCRC32C is not set | ||
1138 | CONFIG_ZLIB_INFLATE=y | ||
1139 | CONFIG_ZLIB_DEFLATE=y | ||
1140 | CONFIG_PLIST=y | ||
1141 | CONFIG_HAS_IOMEM=y | ||
1142 | CONFIG_HAS_IOPORT=y | ||
1143 | CONFIG_HAS_DMA=y | ||
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index d12c616407d6..5b0422cdde76 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig | |||
@@ -181,6 +181,21 @@ endif | |||
181 | 181 | ||
182 | # ---------------------------------------------------------- | 182 | # ---------------------------------------------------------- |
183 | 183 | ||
184 | if ARCH_AT91CAP9 | ||
185 | |||
186 | comment "AT91CAP9 Board Type" | ||
187 | |||
188 | config MACH_AT91CAP9ADK | ||
189 | bool "Atmel AT91CAP9A-DK Evaluation Kit" | ||
190 | depends on ARCH_AT91CAP9 | ||
191 | help | ||
192 | Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. | ||
193 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> | ||
194 | |||
195 | endif | ||
196 | |||
197 | # ---------------------------------------------------------- | ||
198 | |||
184 | if ARCH_AT91X40 | 199 | if ARCH_AT91X40 |
185 | 200 | ||
186 | comment "AT91X40 Board Type" | 201 | comment "AT91X40 Board Type" |
@@ -201,13 +216,13 @@ comment "AT91 Board Options" | |||
201 | 216 | ||
202 | config MTD_AT91_DATAFLASH_CARD | 217 | config MTD_AT91_DATAFLASH_CARD |
203 | bool "Enable DataFlash Card support" | 218 | bool "Enable DataFlash Card support" |
204 | depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) | 219 | depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK) |
205 | help | 220 | help |
206 | Enable support for the DataFlash card. | 221 | Enable support for the DataFlash card. |
207 | 222 | ||
208 | config MTD_NAND_AT91_BUSWIDTH_16 | 223 | config MTD_NAND_AT91_BUSWIDTH_16 |
209 | bool "Enable 16-bit data bus interface to NAND flash" | 224 | bool "Enable 16-bit data bus interface to NAND flash" |
210 | depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) | 225 | depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK) |
211 | help | 226 | help |
212 | On AT91SAM926x boards both types of NAND flash can be present | 227 | On AT91SAM926x boards both types of NAND flash can be present |
213 | (8 and 16 bit data bus width). | 228 | (8 and 16 bit data bus width). |
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 10413c5d3f8a..bf5f293dccf8 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile | |||
@@ -42,6 +42,9 @@ obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o | |||
42 | # AT91SAM9RL board-specific support | 42 | # AT91SAM9RL board-specific support |
43 | obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o | 43 | obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o |
44 | 44 | ||
45 | # AT91CAP9 board-specific support | ||
46 | obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o | ||
47 | |||
45 | # AT91X40 board-specific support | 48 | # AT91X40 board-specific support |
46 | obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o | 49 | obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o |
47 | 50 | ||
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c new file mode 100644 index 000000000000..185437131541 --- /dev/null +++ b/arch/arm/mach-at91/board-cap9adk.c | |||
@@ -0,0 +1,359 @@ | |||
1 | /* | ||
2 | * linux/arch/arm/mach-at91/board-cap9adk.c | ||
3 | * | ||
4 | * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> | ||
5 | * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> | ||
6 | * Copyright (C) 2005 SAN People | ||
7 | * Copyright (C) 2007 Atmel Corporation. | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify | ||
10 | * it under the terms of the GNU General Public License as published by | ||
11 | * the Free Software Foundation; either version 2 of the License, or | ||
12 | * (at your option) any later version. | ||
13 | * | ||
14 | * This program is distributed in the hope that it will be useful, | ||
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
17 | * GNU General Public License for more details. | ||
18 | * | ||
19 | * You should have received a copy of the GNU General Public License | ||
20 | * along with this program; if not, write to the Free Software | ||
21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | ||
22 | */ | ||
23 | |||
24 | #include <linux/types.h> | ||
25 | #include <linux/init.h> | ||
26 | #include <linux/mm.h> | ||
27 | #include <linux/module.h> | ||
28 | #include <linux/platform_device.h> | ||
29 | #include <linux/spi/spi.h> | ||
30 | #include <linux/spi/ads7846.h> | ||
31 | #include <linux/fb.h> | ||
32 | #include <linux/mtd/physmap.h> | ||
33 | |||
34 | #include <video/atmel_lcdc.h> | ||
35 | |||
36 | #include <asm/hardware.h> | ||
37 | #include <asm/setup.h> | ||
38 | #include <asm/mach-types.h> | ||
39 | #include <asm/irq.h> | ||
40 | |||
41 | #include <asm/mach/arch.h> | ||
42 | #include <asm/mach/map.h> | ||
43 | #include <asm/mach/irq.h> | ||
44 | |||
45 | #include <asm/arch/board.h> | ||
46 | #include <asm/arch/gpio.h> | ||
47 | #include <asm/arch/at91cap9_matrix.h> | ||
48 | #include <asm/arch/at91sam926x_mc.h> | ||
49 | |||
50 | #include "generic.h" | ||
51 | |||
52 | |||
53 | static void __init cap9adk_map_io(void) | ||
54 | { | ||
55 | /* Initialize processor: 12 MHz crystal */ | ||
56 | at91cap9_initialize(12000000); | ||
57 | |||
58 | /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */ | ||
59 | at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11); | ||
60 | /* ... POWER LED always on */ | ||
61 | at91_set_gpio_output(AT91_PIN_PC29, 1); | ||
62 | |||
63 | /* Setup the serial ports and console */ | ||
64 | at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */ | ||
65 | at91_set_serial_console(0); | ||
66 | } | ||
67 | |||
68 | static void __init cap9adk_init_irq(void) | ||
69 | { | ||
70 | at91cap9_init_interrupts(NULL); | ||
71 | } | ||
72 | |||
73 | |||
74 | /* | ||
75 | * USB Host port | ||
76 | */ | ||
77 | static struct at91_usbh_data __initdata cap9adk_usbh_data = { | ||
78 | .ports = 2, | ||
79 | }; | ||
80 | |||
81 | |||
82 | /* | ||
83 | * ADS7846 Touchscreen | ||
84 | */ | ||
85 | #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) | ||
86 | static int ads7843_pendown_state(void) | ||
87 | { | ||
88 | return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */ | ||
89 | } | ||
90 | |||
91 | static struct ads7846_platform_data ads_info = { | ||
92 | .model = 7843, | ||
93 | .x_min = 150, | ||
94 | .x_max = 3830, | ||
95 | .y_min = 190, | ||
96 | .y_max = 3830, | ||
97 | .vref_delay_usecs = 100, | ||
98 | .x_plate_ohms = 450, | ||
99 | .y_plate_ohms = 250, | ||
100 | .pressure_max = 15000, | ||
101 | .debounce_max = 1, | ||
102 | .debounce_rep = 0, | ||
103 | .debounce_tol = (~0), | ||
104 | .get_pendown_state = ads7843_pendown_state, | ||
105 | }; | ||
106 | |||
107 | static void __init cap9adk_add_device_ts(void) | ||
108 | { | ||
109 | at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */ | ||
110 | at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */ | ||
111 | } | ||
112 | #else | ||
113 | static void __init cap9adk_add_device_ts(void) {} | ||
114 | #endif | ||
115 | |||
116 | |||
117 | /* | ||
118 | * SPI devices. | ||
119 | */ | ||
120 | static struct spi_board_info cap9adk_spi_devices[] = { | ||
121 | #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) | ||
122 | { /* DataFlash card */ | ||
123 | .modalias = "mtd_dataflash", | ||
124 | .chip_select = 0, | ||
125 | .max_speed_hz = 15 * 1000 * 1000, | ||
126 | .bus_num = 0, | ||
127 | }, | ||
128 | #endif | ||
129 | #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) | ||
130 | { | ||
131 | .modalias = "ads7846", | ||
132 | .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */ | ||
133 | .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ | ||
134 | .bus_num = 0, | ||
135 | .platform_data = &ads_info, | ||
136 | .irq = AT91_PIN_PC4, | ||
137 | }, | ||
138 | #endif | ||
139 | }; | ||
140 | |||
141 | |||
142 | /* | ||
143 | * MCI (SD/MMC) | ||
144 | */ | ||
145 | static struct at91_mmc_data __initdata cap9adk_mmc_data = { | ||
146 | .wire4 = 1, | ||
147 | // .det_pin = ... not connected | ||
148 | // .wp_pin = ... not connected | ||
149 | // .vcc_pin = ... not connected | ||
150 | }; | ||
151 | |||
152 | |||
153 | /* | ||
154 | * MACB Ethernet device | ||
155 | */ | ||
156 | static struct at91_eth_data __initdata cap9adk_macb_data = { | ||
157 | .is_rmii = 1, | ||
158 | }; | ||
159 | |||
160 | |||
161 | /* | ||
162 | * NAND flash | ||
163 | */ | ||
164 | static struct mtd_partition __initdata cap9adk_nand_partitions[] = { | ||
165 | { | ||
166 | .name = "NAND partition", | ||
167 | .offset = 0, | ||
168 | .size = MTDPART_SIZ_FULL, | ||
169 | }, | ||
170 | }; | ||
171 | |||
172 | static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) | ||
173 | { | ||
174 | *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions); | ||
175 | return cap9adk_nand_partitions; | ||
176 | } | ||
177 | |||
178 | static struct at91_nand_data __initdata cap9adk_nand_data = { | ||
179 | .ale = 21, | ||
180 | .cle = 22, | ||
181 | // .det_pin = ... not connected | ||
182 | // .rdy_pin = ... not connected | ||
183 | .enable_pin = AT91_PIN_PD15, | ||
184 | .partition_info = nand_partitions, | ||
185 | #if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) | ||
186 | .bus_width_16 = 1, | ||
187 | #else | ||
188 | .bus_width_16 = 0, | ||
189 | #endif | ||
190 | }; | ||
191 | |||
192 | |||
193 | /* | ||
194 | * NOR flash | ||
195 | */ | ||
196 | static struct mtd_partition cap9adk_nor_partitions[] = { | ||
197 | { | ||
198 | .name = "NOR partition", | ||
199 | .offset = 0, | ||
200 | .size = MTDPART_SIZ_FULL, | ||
201 | }, | ||
202 | }; | ||
203 | |||
204 | static struct physmap_flash_data cap9adk_nor_data = { | ||
205 | .width = 2, | ||
206 | .parts = cap9adk_nor_partitions, | ||
207 | .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions), | ||
208 | }; | ||
209 | |||
210 | #define NOR_BASE AT91_CHIPSELECT_0 | ||
211 | #define NOR_SIZE 0x800000 | ||
212 | |||
213 | static struct resource nor_flash_resources[] = { | ||
214 | { | ||
215 | .start = NOR_BASE, | ||
216 | .end = NOR_BASE + NOR_SIZE - 1, | ||
217 | .flags = IORESOURCE_MEM, | ||
218 | } | ||
219 | }; | ||
220 | |||
221 | static struct platform_device cap9adk_nor_flash = { | ||
222 | .name = "physmap-flash", | ||
223 | .id = 0, | ||
224 | .dev = { | ||
225 | .platform_data = &cap9adk_nor_data, | ||
226 | }, | ||
227 | .resource = nor_flash_resources, | ||
228 | .num_resources = ARRAY_SIZE(nor_flash_resources), | ||
229 | }; | ||
230 | |||
231 | static __init void cap9adk_add_device_nor(void) | ||
232 | { | ||
233 | unsigned long csa; | ||
234 | |||
235 | csa = at91_sys_read(AT91_MATRIX_EBICSA); | ||
236 | at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); | ||
237 | |||
238 | /* set the bus interface characteristics */ | ||
239 | at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) | ||
240 | | AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2)); | ||
241 | |||
242 | at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) | ||
243 | | AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10)); | ||
244 | |||
245 | at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); | ||
246 | |||
247 | at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | ||
248 | | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | ||
249 | | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); | ||
250 | |||
251 | platform_device_register(&cap9adk_nor_flash); | ||
252 | } | ||
253 | |||
254 | |||
255 | /* | ||
256 | * LCD Controller | ||
257 | */ | ||
258 | #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) | ||
259 | static struct fb_videomode at91_tft_vga_modes[] = { | ||
260 | { | ||
261 | .name = "TX09D50VM1CCA @ 60", | ||
262 | .refresh = 60, | ||
263 | .xres = 240, .yres = 320, | ||
264 | .pixclock = KHZ2PICOS(4965), | ||
265 | |||
266 | .left_margin = 1, .right_margin = 33, | ||
267 | .upper_margin = 1, .lower_margin = 0, | ||
268 | .hsync_len = 5, .vsync_len = 1, | ||
269 | |||
270 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | ||
271 | .vmode = FB_VMODE_NONINTERLACED, | ||
272 | }, | ||
273 | }; | ||
274 | |||
275 | static struct fb_monspecs at91fb_default_monspecs = { | ||
276 | .manufacturer = "HIT", | ||
277 | .monitor = "TX09D70VM1CCA", | ||
278 | |||
279 | .modedb = at91_tft_vga_modes, | ||
280 | .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), | ||
281 | .hfmin = 15000, | ||
282 | .hfmax = 64000, | ||
283 | .vfmin = 50, | ||
284 | .vfmax = 150, | ||
285 | }; | ||
286 | |||
287 | #define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ | ||
288 | | ATMEL_LCDC_DISTYPE_TFT \ | ||
289 | | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) | ||
290 | |||
291 | static void at91_lcdc_power_control(int on) | ||
292 | { | ||
293 | if (on) | ||
294 | at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */ | ||
295 | else | ||
296 | at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */ | ||
297 | } | ||
298 | |||
299 | /* Driver datas */ | ||
300 | static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = { | ||
301 | .default_bpp = 16, | ||
302 | .default_dmacon = ATMEL_LCDC_DMAEN, | ||
303 | .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2, | ||
304 | .default_monspecs = &at91fb_default_monspecs, | ||
305 | .atmel_lcdfb_power_control = at91_lcdc_power_control, | ||
306 | .guard_time = 1, | ||
307 | }; | ||
308 | |||
309 | #else | ||
310 | static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data; | ||
311 | #endif | ||
312 | |||
313 | |||
314 | /* | ||
315 | * AC97 | ||
316 | */ | ||
317 | static struct atmel_ac97_data cap9adk_ac97_data = { | ||
318 | // .reset_pin = ... not connected | ||
319 | }; | ||
320 | |||
321 | |||
322 | static void __init cap9adk_board_init(void) | ||
323 | { | ||
324 | /* Serial */ | ||
325 | at91_add_device_serial(); | ||
326 | /* USB Host */ | ||
327 | set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH); | ||
328 | at91_add_device_usbh(&cap9adk_usbh_data); | ||
329 | /* SPI */ | ||
330 | at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); | ||
331 | /* Touchscreen */ | ||
332 | cap9adk_add_device_ts(); | ||
333 | /* MMC */ | ||
334 | at91_add_device_mmc(1, &cap9adk_mmc_data); | ||
335 | /* Ethernet */ | ||
336 | at91_add_device_eth(&cap9adk_macb_data); | ||
337 | /* NAND */ | ||
338 | at91_add_device_nand(&cap9adk_nand_data); | ||
339 | /* NOR Flash */ | ||
340 | cap9adk_add_device_nor(); | ||
341 | /* I2C */ | ||
342 | at91_add_device_i2c(NULL, 0); | ||
343 | /* LCD Controller */ | ||
344 | set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH); | ||
345 | at91_add_device_lcdc(&cap9adk_lcdc_data); | ||
346 | /* AC97 */ | ||
347 | at91_add_device_ac97(&cap9adk_ac97_data); | ||
348 | } | ||
349 | |||
350 | MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") | ||
351 | /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ | ||
352 | .phys_io = AT91_BASE_SYS, | ||
353 | .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, | ||
354 | .boot_params = AT91_SDRAM_BASE + 0x100, | ||
355 | .timer = &at91sam926x_timer, | ||
356 | .map_io = cap9adk_map_io, | ||
357 | .init_irq = cap9adk_init_irq, | ||
358 | .init_machine = cap9adk_board_init, | ||
359 | MACHINE_END | ||