[ARM] pxa/treo: add Palm Centro 685 support

Signed-off-by: Tomáš Čech <sleep_walker@suse.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

4 files changed, 180 insertions, 1 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index ce6519c000a6..28f0260777a3 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -425,6 +425,17 @@ config PALM_TREO
         bool
         depends on ARCH_PXA_PALM
 
+config MACH_CENTRO
+        bool "Palm Centro 685 (GSM)"
+        default y
+        depends on ARCH_PXA_PALM
+        select PXA27x
+        select IWMMXT
+        select PALM_TREO
+        help
+          Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
+          smartphone.
+
 config MACH_TREO680
         bool "Palm Treo 680"
         default y
diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h
index 8cb0bca7f707..2d3f14e3be29 100644
--- a/arch/arm/mach-pxa/include/mach/palmtreo.h
+++ b/arch/arm/mach-pxa/include/mach/palmtreo.h
@@ -3,6 +3,7 @@
  *
  * currently supported:
  *     Palm Treo 680 (GSM)
+ *     Palm Centro 685 (GSM)
  *
  * Author:     Tomas Cech <sleep_walker@suse.cz>
  *
@@ -45,6 +46,12 @@
 #define GPIO_NR_TREO680_BT_EN           43
 #endif /* CONFIG_MACH_TREO680 */
 
+/* Centro685 specific GPIOs */
+#define GPIO_NR_CENTRO_SD_POWER         21
+#define GPIO_NR_CENTRO_VIBRATE_EN       22
+#define GPIO_NR_CENTRO_KEYB_BL          33
+#define GPIO_NR_CENTRO_BT_EN            80
+
 /* Various addresses  */
 #define TREO_PHYS_RAM_START     0xa0000000
 #define TREO_PHYS_IO_START      0x40000000
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 5e66028d2911..c071b60ebed8 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -3,6 +3,7 @@
  *
  * currently supported:
  *     Palm Treo 680 (GSM)
+ *     Palm Centro 685 (GSM)
  *
  * Author:     Tomas Cech <sleep_walker@suse.cz>
  *
@@ -160,6 +161,21 @@ static unsigned long treo680_pin_config[] __initdata = {
 };
 #endif /* CONFIG_MACH_TREO680 */
 
+#ifdef CONFIG_MACH_CENTRO
+static unsigned long centro685_pin_config[] __initdata = {
+        /* Bluetooth attached to BT UART*/
+        MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW),    /* power: LOW = off */
+        GPIO42_BTUART_RXD,
+        GPIO43_BTUART_TXD,
+        GPIO44_BTUART_CTS,
+        GPIO45_BTUART_RTS,
+
+        /* MATRIX KEYPAD - different wake up source */
+        GPIO100_KP_MKIN_0,
+        GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
@@ -172,6 +188,16 @@ static struct pxamci_platform_data treo680_mci_platform_data = {
 };
 #endif /* CONFIG_MACH_TREO680 */
 
+#ifdef CONFIG_MACH_CENTRO
+static struct pxamci_platform_data centro_mci_platform_data = {
+        .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
+        .gpio_card_detect       = GPIO_NR_TREO_SD_DETECT_N,
+        .gpio_card_ro           = -1,
+        .gpio_power             = GPIO_NR_CENTRO_SD_POWER,
+        .gpio_power_invert      = 1,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
 /******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
@@ -247,6 +273,78 @@ static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
 };
 #endif /* CONFIG_MACH_TREO680 */
 
+#ifdef CONFIG_MACH_CENTRO
+static unsigned int centro_matrix_keys[] = {
+        KEY(0, 0, KEY_F9),              /* Home */
+        KEY(0, 1, KEY_LEFT),
+        KEY(0, 2, KEY_LEFTCTRL),        /* Alternate */
+        KEY(0, 3, KEY_L),
+        KEY(0, 4, KEY_A),
+        KEY(0, 5, KEY_Q),
+        KEY(0, 6, KEY_P),
+
+        KEY(1, 0, KEY_RIGHTCTRL),       /* Menu */
+        KEY(1, 1, KEY_RIGHT),
+        KEY(1, 2, KEY_LEFTSHIFT),       /* Left shift */
+        KEY(1, 3, KEY_Z),
+        KEY(1, 4, KEY_S),
+        KEY(1, 5, KEY_W),
+
+        KEY(2, 0, KEY_F1),              /* Phone */
+        KEY(2, 1, KEY_UP),
+        KEY(2, 2, KEY_0),
+        KEY(2, 3, KEY_X),
+        KEY(2, 4, KEY_D),
+        KEY(2, 5, KEY_E),
+
+        KEY(3, 0, KEY_F10),             /* Calendar */
+        KEY(3, 1, KEY_DOWN),
+        KEY(3, 2, KEY_SPACE),
+        KEY(3, 3, KEY_C),
+        KEY(3, 4, KEY_F),
+        KEY(3, 5, KEY_R),
+
+        KEY(4, 0, KEY_F12),             /* Mail */
+        KEY(4, 1, KEY_KPENTER),
+        KEY(4, 2, KEY_RIGHTALT),        /* Alt */
+        KEY(4, 3, KEY_V),
+        KEY(4, 4, KEY_G),
+        KEY(4, 5, KEY_T),
+
+        KEY(5, 0, KEY_F8),              /* Red/Off/Power */
+        KEY(5, 1, KEY_PAGEUP),          /* Side up */
+        KEY(5, 2, KEY_DOT),
+        KEY(5, 3, KEY_B),
+        KEY(5, 4, KEY_H),
+        KEY(5, 5, KEY_Y),
+
+        KEY(6, 0, KEY_TAB),             /* Side Activate */
+        KEY(6, 1, KEY_PAGEDOWN),        /* Side down */
+        KEY(6, 2, KEY_ENTER),
+        KEY(6, 3, KEY_N),
+        KEY(6, 4, KEY_J),
+        KEY(6, 5, KEY_U),
+
+        KEY(7, 0, KEY_F6),              /* Green/Call */
+        KEY(7, 1, KEY_O),
+        KEY(7, 2, KEY_BACKSPACE),
+        KEY(7, 3, KEY_M),
+        KEY(7, 4, KEY_K),
+        KEY(7, 5, KEY_I),
+};
+
+static struct pxa27x_keypad_platform_data centro_keypad_platform_data = {
+        .matrix_key_rows        = 8,
+        .matrix_key_cols        = 7,
+        .matrix_key_map         = centro_matrix_keys,
+        .matrix_key_map_size    = ARRAY_SIZE(centro_matrix_keys),
+        .direct_key_map         = { KEY_CONNECT },
+        .direct_key_num         = 1,
+
+        .debounce_interval      = 30,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
 /******************************************************************************
  * aSoC audio
  ******************************************************************************/
@@ -423,6 +521,40 @@ static struct platform_device treo680_leds = {
 };
 #endif /* CONFIG_MACH_TREO680 */
 
+#ifdef CONFIG_MACH_CENTRO
+static struct gpio_led centro_gpio_leds[] = {
+        {
+                .name                   = "centro:vibra:vibra",
+                .default_trigger        = "none",
+                .gpio                   = GPIO_NR_CENTRO_VIBRATE_EN,
+        },
+        {
+                .name                   = "centro:green:led",
+                .default_trigger        = "mmc0",
+                .gpio                   = GPIO_NR_TREO_GREEN_LED,
+        },
+        {
+                .name                   = "centro:white:keybbl",
+                .default_trigger        = "none",
+                .active_low             = 1,
+                .gpio                   = GPIO_NR_CENTRO_KEYB_BL,
+        },
+};
+
+static struct gpio_led_platform_data centro_gpio_led_info = {
+        .leds           = centro_gpio_leds,
+        .num_leds       = ARRAY_SIZE(centro_gpio_leds),
+};
+
+static struct platform_device centro_leds = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &centro_gpio_led_info,
+        }
+};
+#endif /* CONFIG_MACH_CENTRO */
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -484,6 +616,12 @@ static struct platform_device *treo680_devices[] __initdata = {
 };
 #endif /* CONFIG_MACH_TREO680 */
 
+#ifdef CONFIG_MACH_CENTRO
+static struct platform_device *centro_devices[] __initdata = {
+        &centro_leds,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
 /* setup udc GPIOs initial state */
 static void __init treo_udc_init(void)
 {
@@ -549,3 +687,26 @@ MACHINE_START(TREO680, "Palm Treo 680")
         .init_machine   = treo680_init,
 MACHINE_END
 #endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static void __init centro_init(void)
+{
+        treo_init();
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
+        pxa_set_mci_info(&centro_mci_platform_data);
+
+        pxa_set_keypad_info(&centro_keypad_platform_data);
+
+        platform_add_devices(ARRAY_AND_SIZE(centro_devices));
+}
+
+MACHINE_START(CENTRO, "Palm Centro 685")
+        .phys_io        = TREO_PHYS_IO_START,
+        .io_pg_offst    = io_p2v(0x40000000),
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+       .init_machine   = centro_init,
+MACHINE_END
+#endif /* CONFIG_MACH_CENTRO */
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index ea67be0223ac..3e8556b16a9f 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -881,7 +881,7 @@ void __init reserve_node_zero(pg_data_t *pgdat)
                                 BOOTMEM_EXCLUSIVE);
         }
 
-        if (machine_is_treo680()) {
+        if (machine_is_treo680() || machine_is_centro()) {
                 reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
                                 BOOTMEM_EXCLUSIVE);
                 reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,