[ARM] 4809/2: ixp4xx: Merge dsmg600-power.c into dsmg600-setup.c

There is no reason to have power control in a separate file from the
board setup code.  Merge it back into the board setup file and remove
superfluous header includes.

--

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

3 files changed, 88 insertions, 135 deletions

diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index a7880aba3fa7..c1956882c48b 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)     += gtwx5715-setup.o
 obj-$(CONFIG_MACH_NSLU2)        += nslu2-setup.o
 obj-$(CONFIG_MACH_NAS100D)      += nas100d-setup.o
-obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o dsmg600-power.o
+obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)  += gateway7001-setup.o
 obj-$(CONFIG_MACH_WG302V2)      += wg302v2-setup.o
 
diff --git a/arch/arm/mach-ixp4xx/dsmg600-power.c b/arch/arm/mach-ixp4xx/dsmg600-power.c
deleted file mode 100644
index db6398777124..000000000000
--- a/arch/arm/mach-ixp4xx/dsmg600-power.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/dsmg600-power.c
- *
- * DSM-G600 Power/Reset driver
- * Author: Michael Westerhof <mwester@dls.net>
- *
- * Based on nslu2-power.c
- *  Copyright (C) 2005 Tower Technologies
- *  Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * which was based on nslu2-io.c
- *  Copyright (C) 2004 Karen Spearel
- *
- * Maintainers: http://www.nslu2-linux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-
-#include <asm/gpio.h>
-#include <asm/mach-types.h>
-
-/* This is used to make sure the power-button pusher is serious.  The button
- * must be held until the value of this counter reaches zero.
- */
-static int power_button_countdown;
-
-/* Must hold the button down for at least this many counts to be processed */
-#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-
-static void dsmg600_power_handler(unsigned long data);
-static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
-
-static void dsmg600_power_handler(unsigned long data)
-{
-        /* This routine is called twice per second to check the
-         * state of the power button.
-         */
-
-        if (gpio_get_value(DSMG600_PB_GPIO)) {
-
-                /* IO Pin is 1 (button pushed) */
-                if (power_button_countdown > 0)
-                        power_button_countdown--;
-
-        } else {
-
-                /* Done on button release, to allow for auto-power-on mods. */
-                if (power_button_countdown == 0) {
-                        /* Signal init to do the ctrlaltdel action,
-                         * this will bypass init if it hasn't started
-                         * and do a kernel_restart.
-                         */
-                        ctrl_alt_del();
-
-                        /* Change the state of the power LED to "blink" */
-                        gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-                } else {
-                        power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-                }
-        }
-
-        mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-}
-
-static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
-{
-        /* This is the paper-clip reset, it shuts the machine down directly. */
-        machine_power_off();
-
-        return IRQ_HANDLED;
-}
-
-static int __init dsmg600_power_init(void)
-{
-        if (!(machine_is_dsmg600()))
-                return 0;
-
-        if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
-                IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
-                NULL) < 0) {
-
-                printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-                        gpio_to_irq(DSMG600_RB_GPIO));
-
-                return -EIO;
-        }
-
-        /* The power button on the D-Link DSM-G600 is on GPIO 15, but
-         * it cannot handle interrupts on that GPIO line.  So we'll
-         * have to poll it with a kernel timer.
-         */
-
-        /* Make sure that the power button GPIO is set up as an input */
-        gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
-
-        /* Set the initial value for the power button IRQ handler */
-        power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-        mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-
-        return 0;
-}
-
-static void __exit dsmg600_power_exit(void)
-{
-        if (!(machine_is_dsmg600()))
-                return;
-
-        del_timer_sync(&dsmg600_power_timer);
-
-        free_irq(gpio_to_irq(DSMG600_RB_GPIO), NULL);
-}
-
-module_init(dsmg600_power_init);
-module_exit(dsmg600_power_exit);
-
-MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>");
-MODULE_DESCRIPTION("DSM-G600 Power/Reset driver");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index d0e129566fbc..688659668bdf 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -1,20 +1,29 @@
 /*
  * DSM-G600 board-setup
  *
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
  * Copyright (C) 2006 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
  *
- * based ixdp425-setup.c:
+ * based on ixdp425-setup.c:
  *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nslu2-power.c:
+ *      Copyright (C) 2005 Tower Technologies
+ * based on nslu2-io.c:
+ *      Copyright (C) 2004 Karen Spearel
  *
  * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Author: Michael Westerhof <mwester@dls.net>
+ * Author: Rod Whitby <rod@whitby.id.au>
  * Maintainers: http://www.nslu2-linux.org/
  */
 
-#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
 #include <linux/leds.h>
+#include <linux/reboot.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 
@@ -22,6 +31,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
+#include <asm/gpio.h>
 
 static struct flash_platform_data dsmg600_flash_data = {
         .map_name               = "cfi_probe",
@@ -140,6 +150,57 @@ static void dsmg600_power_off(void)
         gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
 }
 
+/* This is used to make sure the power-button pusher is serious.  The button
+ * must be held until the value of this counter reaches zero.
+ */
+static int power_button_countdown;
+
+/* Must hold the button down for at least this many counts to be processed */
+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
+
+static void dsmg600_power_handler(unsigned long data);
+static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
+
+static void dsmg600_power_handler(unsigned long data)
+{
+        /* This routine is called twice per second to check the
+         * state of the power button.
+         */
+
+        if (gpio_get_value(DSMG600_PB_GPIO)) {
+
+                /* IO Pin is 1 (button pushed) */
+                if (power_button_countdown > 0)
+                        power_button_countdown--;
+
+        } else {
+
+                /* Done on button release, to allow for auto-power-on mods. */
+                if (power_button_countdown == 0) {
+                        /* Signal init to do the ctrlaltdel action,
+                         * this will bypass init if it hasn't started
+                         * and do a kernel_restart.
+                         */
+                        ctrl_alt_del();
+
+                        /* Change the state of the power LED to "blink" */
+                        gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+                } else {
+                        power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+                }
+        }
+
+        mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+}
+
+static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
+{
+        /* This is the paper-clip reset, it shuts the machine down directly. */
+        machine_power_off();
+
+        return IRQ_HANDLED;
+}
+
 static void __init dsmg600_timer_init(void)
 {
     /* The xtal on this machine is non-standard. */
@@ -164,8 +225,6 @@ static void __init dsmg600_init(void)
         dsmg600_flash_resource.end =
                 IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 
-        pm_power_off = dsmg600_power_off;
-
         i2c_register_board_info(0, dsmg600_i2c_board_info,
                                 ARRAY_SIZE(dsmg600_i2c_board_info));
 
@@ -176,6 +235,29 @@ static void __init dsmg600_init(void)
         (void)platform_device_register(&dsmg600_uart);
 
         platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
+
+        pm_power_off = dsmg600_power_off;
+
+        if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
+                IRQF_DISABLED | IRQF_TRIGGER_LOW,
+                "DSM-G600 reset button", NULL) < 0) {
+
+                printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+                        gpio_to_irq(DSMG600_RB_GPIO));
+        }
+
+        /* The power button on the D-Link DSM-G600 is on GPIO 15, but
+         * it cannot handle interrupts on that GPIO line.  So we'll
+         * have to poll it with a kernel timer.
+         */
+
+        /* Make sure that the power button GPIO is set up as an input */
+        gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
+
+        /* Set the initial value for the power button IRQ handler */
+        power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+        mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
 }
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")