Merge branch 'next/dt-exynos4x12' into next/dt-samsung

Conflicts:
	arch/arm/boot/dts/exynos4210.dtsi

110 files changed, 1851 insertions, 459 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 73067efd4845..ade7e924bef5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1603,8 +1603,8 @@ config NR_CPUS
         default "4"
 
 config HOTPLUG_CPU
-        bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-        depends on SMP && HOTPLUG && EXPERIMENTAL
+        bool "Support for hot-pluggable CPUs"
+        depends on SMP && HOTPLUG
         help
           Say Y here to experiment with turning CPUs off and on.  CPUs
           can be controlled through /sys/devices/system/cpu.
@@ -1645,8 +1645,8 @@ config HZ
         default 100
 
 config THUMB2_KERNEL
-        bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
-        depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
+        bool "Compile the kernel in Thumb-2 mode"
+        depends on CPU_V7 && !CPU_V6 && !CPU_V6K
         select AEABI
         select ARM_ASM_UNIFIED
         select ARM_UNWIND
@@ -1850,6 +1850,7 @@ config XEN_DOM0
 config XEN
         bool "Xen guest support on ARM (EXPERIMENTAL)"
         depends on EXPERIMENTAL && ARM && OF
+        depends on CPU_V7 && !CPU_V6
         help
           Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index f023e3acdfbd..5f914fca911b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -21,8 +21,6 @@ endif
 OBJCOPYFLAGS    :=-O binary -R .comment -S
 GZFLAGS         :=-9
 #KBUILD_CFLAGS  +=-pipe
-# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
-KBUILD_CFLAGS   +=$(call cc-option,-marm,)
 
 # Never generate .eh_frame
 KBUILD_CFLAGS   += $(call cc-option,-fno-dwarf2-cfi-asm)
@@ -105,17 +103,20 @@ endif
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
 AFLAGS_AUTOIT   :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
 AFLAGS_NOWARN   :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
-CFLAGS_THUMB2   :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
-AFLAGS_THUMB2   :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+CFLAGS_ISA      :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_ISA      :=$(CFLAGS_ISA) -Wa$(comma)-mthumb
 # Work around buggy relocation from gas if requested:
 ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
 CFLAGS_MODULE   +=-fno-optimize-sibling-calls
 endif
+else
+CFLAGS_ISA      :=$(call cc-option,-marm,)
+AFLAGS_ISA      :=$(CFLAGS_ISA)
 endif
 
 # Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS   +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS   +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_CFLAGS   +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS   +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS      += -D__arm__
 
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 3fdab016aa5c..f2aa09eb658e 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y)
 
 $(obj)/xipImage: vmlinux FORCE
         $(call if_changed,objcopy)
-        @echo '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+        $(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
 
 $(obj)/Image $(obj)/zImage: FORCE
         @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE
 
 $(obj)/Image: vmlinux FORCE
         $(call if_changed,objcopy)
-        @echo '  Kernel: $@ is ready'
+        $(kecho) '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: $(obj)/Image FORCE
         $(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:  $(obj)/compressed/vmlinux FORCE
         $(call if_changed,objcopy)
-        @echo '  Kernel: $@ is ready'
+        $(kecho) '  Kernel: $@ is ready'
 
 endif
 
@@ -90,7 +90,7 @@ fi
 $(obj)/uImage:  $(obj)/zImage FORCE
         @$(check_for_multiple_loadaddr)
         $(call if_changed,uimage)
-        @echo '  Image $@ is ready'
+        $(kecho) '  Image $@ is ready'
 
 $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
         $(Q)$(MAKE) $(build)=$(obj)/bootp $@
@@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
         $(call if_changed,objcopy)
-        @echo '  Kernel: $@ is ready'
+        $(kecho) '  Kernel: $@ is ready'
 
 PHONY += initrd FORCE
 initrd:
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c1ce813fcc4a..36488a58940b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -23,8 +23,11 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
         exynos4210-smdkv310.dtb \
         exynos4210-trats.dtb \
+        exynos4412-smdk4412.dtb \
         exynos5250-smdk5250.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
+        integratorcp.dtb
 dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
         kirkwood-dns325.dtb \
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index b06c0db273b1..e6391a4e6649 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -126,14 +126,14 @@
                 #size-cells = <0>;
 
                 btn3 {
-                        label = "Buttin 3";
+                        label = "Button 3";
                         gpios = <&pioA 30 1>;
                         linux,code = <0x103>;
                         gpio-key,wakeup;
                 };
 
                 btn4 {
-                        label = "Buttin 4";
+                        label = "Button 4";
                         gpios = <&pioA 31 1>;
                         linux,code = <0x104>;
                         gpio-key,wakeup;
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 748ba7aa746c..4b0e0ca08f40 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -483,6 +483,8 @@
                         compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
                         reg = <0x80004000 0x1000>;
                         interrupts = <0 21 0x4>;
+                        arm,primecell-periphid = <0x180024>;
+
                         #address-cells = <1>;
                         #size-cells = <0>;
                         v-i2c-supply = <&db8500_vape_reg>;
@@ -494,6 +496,8 @@
                         compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
                         reg = <0x80122000 0x1000>;
                         interrupts = <0 22 0x4>;
+                        arm,primecell-periphid = <0x180024>;
+
                         #address-cells = <1>;
                         #size-cells = <0>;
                         v-i2c-supply = <&db8500_vape_reg>;
@@ -505,6 +509,8 @@
                         compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
                         reg = <0x80128000 0x1000>;
                         interrupts = <0 55 0x4>;
+                        arm,primecell-periphid = <0x180024>;
+
                         #address-cells = <1>;
                         #size-cells = <0>;
                         v-i2c-supply = <&db8500_vape_reg>;
@@ -516,6 +522,8 @@
                         compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
                         reg = <0x80110000 0x1000>;
                         interrupts = <0 12 0x4>;
+                        arm,primecell-periphid = <0x180024>;
+
                         #address-cells = <1>;
                         #size-cells = <0>;
                         v-i2c-supply = <&db8500_vape_reg>;
@@ -527,6 +535,8 @@
                         compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
                         reg = <0x8012a000 0x1000>;
                         interrupts = <0 51 0x4>;
+                        arm,primecell-periphid = <0x180024>;
+
                         #address-cells = <1>;
                         #size-cells = <0>;
                         v-i2c-supply = <&db8500_vape_reg>;
@@ -573,33 +583,38 @@
                         interrupts = <0 60 0x4>;
                         status = "disabled";
                 };
+
                 sdi@80118000 {
                         compatible = "arm,pl18x", "arm,primecell";
                         reg = <0x80118000 0x1000>;
                         interrupts = <0 50 0x4>;
                         status = "disabled";
                 };
+
                 sdi@80005000 {
                         compatible = "arm,pl18x", "arm,primecell";
                         reg = <0x80005000 0x1000>;
                         interrupts = <0 41 0x4>;
                         status = "disabled";
                 };
+
                 sdi@80119000 {
                         compatible = "arm,pl18x", "arm,primecell";
                         reg = <0x80119000 0x1000>;
                         interrupts = <0 59 0x4>;
                         status = "disabled";
                 };
+
                 sdi@80114000 {
                         compatible = "arm,pl18x", "arm,primecell";
                         reg = <0x80114000 0x1000>;
                         interrupts = <0 99 0x4>;
                         status = "disabled";
                 };
+
                 sdi@80008000 {
                         compatible = "arm,pl18x", "arm,primecell";
-                        reg = <0x80114000 0x1000>;
+                        reg = <0x80008000 0x1000>;
                         interrupts = <0 100 0x4>;
                         status = "disabled";
                 };
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 96fb824b5e6e..5a00022383e7 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -4,21 +4,32 @@
         compatible = "marvell,dove";
         model = "Marvell Armada 88AP510 SoC";
 
-        interrupt-parent = <&intc>;
-
-        intc: interrupt-controller {
-                compatible = "marvell,orion-intc";
-                interrupt-controller;
-                #interrupt-cells = <1>;
-                reg = <0xf1020204 0x04>,
-                      <0xf1020214 0x04>;
-        };
-
-        mbus@f1000000 {
+        soc@f1000000 {
                 compatible = "simple-bus";
-                ranges = <0 0xf1000000 0x4000000>;
                 #address-cells = <1>;
                 #size-cells = <1>;
+                interrupt-parent = <&intc>;
+
+                ranges = <0xc8000000 0xc8000000 0x0100000   /* CESA SRAM   1M */
+                          0xe0000000 0xe0000000 0x8000000   /* PCIe0 Mem 128M */
+                          0xe8000000 0xe8000000 0x8000000   /* PCIe1 Mem 128M */
+                          0xf0000000 0xf0000000 0x0100000   /* ScratchPad  1M */
+                          0x00000000 0xf1000000 0x1000000   /* SB/NB regs 16M */
+                          0xf2000000 0xf2000000 0x0100000   /* PCIe0 I/O   1M */
+                          0xf2100000 0xf2100000 0x0100000   /* PCIe0 I/O   1M */
+                          0xf8000000 0xf8000000 0x8000000>; /* BootROM   128M */
+
+                l2: l2-cache {
+                        compatible = "marvell,tauros2-cache";
+                        marvell,tauros2-cache-features = <0>;
+                };
+
+                intc: interrupt-controller {
+                        compatible = "marvell,orion-intc";
+                        interrupt-controller;
+                        #interrupt-cells = <1>;
+                        reg = <0x20204 0x04>, <0x20214 0x04>;
+                };
 
                 uart0: serial@12000 {
                         compatible = "ns16550a";
@@ -56,11 +67,6 @@
                         status = "disabled";
                 };
 
-                wdt: wdt@20300 {
-                        compatible = "marvell,orion-wdt";
-                        reg = <0x20300 0x28>;
-                };
-
                 gpio0: gpio@d0400 {
                         compatible = "marvell,orion-gpio";
                         #gpio-cells = <2>;
@@ -139,5 +145,14 @@
                         nr-ports = <1>;
                         status = "disabled";
                 };
+
+                crypto: crypto@30000 {
+                        compatible = "marvell,orion-crypto";
+                        reg = <0x30000 0x10000>,
+                              <0xc8000000 0x800>;
+                        reg-names = "regs", "sram";
+                        interrupts = <31>;
+                        status = "okay";
+                };
         };
 };
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index b12cf272ad0d..6a4a1a04221c 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -16,6 +16,134 @@
 
 / {
         pinctrl@11400000 {
+                gpa0: gpa0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpa1: gpa1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpb: gpb {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpc0: gpc0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpc1: gpc1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpd0: gpd0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpd1: gpd1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpe0: gpe0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpe1: gpe1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpe2: gpe2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpe3: gpe3 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpe4: gpe4 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpf0: gpf0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpf1: gpf1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpf2: gpf2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpf3: gpf3 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
                 uart0_data: uart0-data {
                         samsung,pins = "gpa0-0", "gpa0-1";
                         samsung,pin-function = <0x2>;
@@ -205,6 +333,151 @@
         };
 
         pinctrl@11000000 {
+                gpj0: gpj0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpj1: gpj1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpk0: gpk0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpk1: gpk1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpk2: gpk2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpk3: gpk3 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpl0: gpl0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpl1: gpl1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpl2: gpl2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpy0: gpy0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpy1: gpy1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpy2: gpy2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpy3: gpy3 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpy4: gpy4 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpy5: gpy5 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpy6: gpy6 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpx0: gpx0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        interrupt-parent = <&gic>;
+                        interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+                                     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+                        #interrupt-cells = <2>;
+                };
+
+                gpx1: gpx1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        interrupt-parent = <&gic>;
+                        interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+                                     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+                        #interrupt-cells = <2>;
+                };
+
+                gpx2: gpx2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpx3: gpx3 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
                 sd0_clk: sd0-clk {
                         samsung,pins = "gpk0-0";
                         samsung,pin-function = <2>;
@@ -438,6 +711,11 @@
         };
 
         pinctrl@03860000 {
+                gpz: gpz {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
                 i2s0_bus: i2s0-bus {
                         samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
                                         "gpz-4", "gpz-5", "gpz-6";
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 73567b843e72..a21511c14071 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -20,8 +20,10 @@
         compatible = "samsung,trats", "samsung,exynos4210";
 
         memory {
-                reg =  <0x40000000 0x20000000
-                        0x60000000 0x20000000>;
+                reg =  <0x40000000 0x10000000
+                        0x50000000 0x10000000
+                        0x60000000 0x10000000
+                        0x70000000 0x10000000>;
         };
 
         chosen {
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 038de97b35f7..939f6399c9c7 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -46,27 +46,17 @@
                 compatible = "samsung,pinctrl-exynos4210";
                 reg = <0x11400000 0x1000>;
                 interrupts = <0 47 0>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
         };
 
         pinctrl_1: pinctrl@11000000 {
                 compatible = "samsung,pinctrl-exynos4210";
                 reg = <0x11000000 0x1000>;
                 interrupts = <0 46 0>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
 
                 wakup_eint: wakeup-interrupt-controller {
                         compatible = "samsung,exynos4210-wakeup-eint";
                         interrupt-parent = <&gic>;
-                        interrupt-controller;
-                        #interrupt-cells = <2>;
-                        interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-                                     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-                                     <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-                                     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
-                                     <0 32 0>;
+                        interrupts = <0 32 0>;
                 };
         };
 
@@ -75,235 +65,6 @@
                 reg = <0x03860000 0x1000>;
         };
 
-        gpio-controllers {
-                #address-cells = <1>;
-                #size-cells = <1>;
-                gpio-controller;
-                ranges;
-
-                gpa0: gpio-controller@11400000 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11400000 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpa1: gpio-controller@11400020 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11400020 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpb: gpio-controller@11400040 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11400040 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpc0: gpio-controller@11400060 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11400060 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpc1: gpio-controller@11400080 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11400080 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpd0: gpio-controller@114000A0 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x114000A0 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpd1: gpio-controller@114000C0 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x114000C0 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpe0: gpio-controller@114000E0 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x114000E0 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpe1: gpio-controller@11400100 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11400100 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpe2: gpio-controller@11400120 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11400120 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpe3: gpio-controller@11400140 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11400140 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpe4: gpio-controller@11400160 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11400160 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpf0: gpio-controller@11400180 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11400180 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpf1: gpio-controller@114001A0 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x114001A0 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpf2: gpio-controller@114001C0 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x114001C0 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpf3: gpio-controller@114001E0 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x114001E0 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpj0: gpio-controller@11000000 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000000 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpj1: gpio-controller@11000020 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000020 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpk0: gpio-controller@11000040 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000040 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpk1: gpio-controller@11000060 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000060 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpk2: gpio-controller@11000080 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000080 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpk3: gpio-controller@110000A0 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x110000A0 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpl0: gpio-controller@110000C0 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x110000C0 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpl1: gpio-controller@110000E0 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x110000E0 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpl2: gpio-controller@11000100 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000100 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpy0: gpio-controller@11000120 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000120 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpy1: gpio-controller@11000140 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000140 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpy2: gpio-controller@11000160 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000160 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpy3: gpio-controller@11000180 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000180 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpy4: gpio-controller@110001A0 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x110001A0 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpy5: gpio-controller@110001C0 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x110001C0 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpy6: gpio-controller@110001E0 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x110001E0 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpx0: gpio-controller@11000C00 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000C00 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpx1: gpio-controller@11000C20 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000C20 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpx2: gpio-controller@11000C40 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000C40 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpx3: gpio-controller@11000C60 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x11000C60 0x20>;
-                        #gpio-cells = <4>;
-                };
-
-                gpz: gpio-controller@03860000 {
-                        compatible = "samsung,exynos4-gpio";
-                        reg = <0x03860000 0x20>;
-                        #gpio-cells = <4>;
-                };
-        };
-
         tmu@100C0000 {
                 compatible = "samsung,exynos4210-tmu";
                 interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
new file mode 100644
index 000000000000..c6ae2005961f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Samsung's Exynos4212 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "exynos4x12.dtsi"
+
+/ {
+        compatible = "samsung,exynos4212";
+
+        gic:interrupt-controller@10490000 {
+                cpu-offset = <0x8000>;
+        };
+};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
new file mode 100644
index 000000000000..f05bf575cc45
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -0,0 +1,45 @@
+/*
+ * Samsung's Exynos4412 based SMDK board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Device tree source file for Samsung's SMDK4412 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+        model = "Samsung SMDK evaluation board based on Exynos4412";
+        compatible = "samsung,smdk4412", "samsung,exynos4412";
+
+        memory {
+                reg = <0x40000000 0x40000000>;
+        };
+
+        chosen {
+                bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+        };
+
+        serial@13800000 {
+                status = "okay";
+        };
+
+        serial@13810000 {
+                status = "okay";
+        };
+
+        serial@13820000 {
+                status = "okay";
+        };
+
+        serial@13830000 {
+                status = "okay";
+        };
+};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
new file mode 100644
index 000000000000..d7dfe312772a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Samsung's Exynos4412 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "exynos4x12.dtsi"
+
+/ {
+        compatible = "samsung,exynos4412";
+
+        gic:interrupt-controller@10490000 {
+                cpu-offset = <0x4000>;
+        };
+};
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
new file mode 100644
index 000000000000..56f4669cecc1
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -0,0 +1,965 @@
+/*
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+        pinctrl@11400000 {
+                gpa0: gpa0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpa1: gpa1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpb: gpb {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpc0: gpc0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpc1: gpc1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpd0: gpd0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpd1: gpd1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpf0: gpf0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpf1: gpf1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpf2: gpf2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpf3: gpf3 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpj0: gpj0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpj1: gpj1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                uart0_data: uart0-data {
+                        samsung,pins = "gpa0-0", "gpa0-1";
+                        samsung,pin-function = <0x2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                uart0_fctl: uart0-fctl {
+                        samsung,pins = "gpa0-2", "gpa0-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                uart1_data: uart1-data {
+                        samsung,pins = "gpa0-4", "gpa0-5";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                uart1_fctl: uart1-fctl {
+                        samsung,pins = "gpa0-6", "gpa0-7";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                i2c2_bus: i2c2-bus {
+                        samsung,pins = "gpa0-6", "gpa0-7";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                uart2_data: uart2-data {
+                        samsung,pins = "gpa1-0", "gpa1-1";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                uart2_fctl: uart2-fctl {
+                        samsung,pins = "gpa1-2", "gpa1-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                uart_audio_a: uart-audio-a {
+                        samsung,pins = "gpa1-0", "gpa1-1";
+                        samsung,pin-function = <4>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                i2c3_bus: i2c3-bus {
+                        samsung,pins = "gpa1-2", "gpa1-3";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                uart3_data: uart3-data {
+                        samsung,pins = "gpa1-4", "gpa1-5";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                uart_audio_b: uart-audio-b {
+                        samsung,pins = "gpa1-4", "gpa1-5";
+                        samsung,pin-function = <4>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                spi0_bus: spi0-bus {
+                        samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                i2c4_bus: i2c4-bus {
+                        samsung,pins = "gpb-0", "gpb-1";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                spi1_bus: spi1-bus {
+                        samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                i2c5_bus: i2c5-bus {
+                        samsung,pins = "gpb-2", "gpb-3";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                i2s1_bus: i2s1-bus {
+                        samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+                                        "gpc0-4";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                pcm1_bus: pcm1-bus {
+                        samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+                                        "gpc0-4";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                ac97_bus: ac97-bus {
+                        samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+                                        "gpc0-4";
+                        samsung,pin-function = <4>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                i2s2_bus: i2s2-bus {
+                        samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+                                        "gpc1-4";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                pcm2_bus: pcm2-bus {
+                        samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+                                        "gpc1-4";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                spdif_bus: spdif-bus {
+                        samsung,pins = "gpc1-0", "gpc1-1";
+                        samsung,pin-function = <4>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                i2c6_bus: i2c6-bus {
+                        samsung,pins = "gpc1-3", "gpc1-4";
+                        samsung,pin-function = <4>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                spi2_bus: spi2-bus {
+                        samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
+                        samsung,pin-function = <5>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                pwm0_out: pwm0-out {
+                        samsung,pins = "gpd0-0";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                pwm1_out: pwm1-out {
+                        samsung,pins = "gpd0-1";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                lcd_ctrl: lcd-ctrl {
+                        samsung,pins = "gpd0-0", "gpd0-1";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                i2c7_bus: i2c7-bus {
+                        samsung,pins = "gpd0-2", "gpd0-3";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                pwm2_out: pwm2-out {
+                        samsung,pins = "gpd0-2";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                pwm3_out: pwm3-out {
+                        samsung,pins = "gpd0-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                i2c0_bus: i2c0-bus {
+                        samsung,pins = "gpd1-0", "gpd1-1";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                mipi0_clk: mipi0-clk {
+                        samsung,pins = "gpd1-0", "gpd1-1";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                i2c1_bus: i2c1-bus {
+                        samsung,pins = "gpd1-2", "gpd1-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                mipi1_clk: mipi1-clk {
+                        samsung,pins = "gpd1-2", "gpd1-3";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                lcd_clk: lcd-clk {
+                        samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                lcd_data16: lcd-data-width16 {
+                        samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+                                        "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+                                        "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+                                        "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                lcd_data18: lcd-data-width18 {
+                        samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+                                        "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+                                        "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+                                        "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+                                        "gpf3-2", "gpf3-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                lcd_data24: lcd-data-width24 {
+                        samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+                                        "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+                                        "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+                                        "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+                                        "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+                                        "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                lcd_ldi: lcd-ldi {
+                        samsung,pins = "gpf3-4";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                cam_port_a: cam-port-a {
+                        samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+                                        "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+                                        "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
+                                        "gpj1-4";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+        };
+
+        pinctrl@11000000 {
+                gpk0: gpk0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpk1: gpk1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpk2: gpk2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpk3: gpk3 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpl0: gpl0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpl1: gpl1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpl2: gpl2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpm0: gpm0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpm1: gpm1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpm2: gpm2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpm3: gpm3 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpm4: gpm4 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpy0: gpy0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpy1: gpy1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpy2: gpy2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpy3: gpy3 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpy4: gpy4 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpy5: gpy5 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpy6: gpy6 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                };
+
+                gpx0: gpx0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        interrupt-parent = <&gic>;
+                        interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+                                     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+                        #interrupt-cells = <2>;
+                };
+
+                gpx1: gpx1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        interrupt-parent = <&gic>;
+                        interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+                                     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+                        #interrupt-cells = <2>;
+                };
+
+                gpx2: gpx2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpx3: gpx3 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                sd0_clk: sd0-clk {
+                        samsung,pins = "gpk0-0";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd0_cmd: sd0-cmd {
+                        samsung,pins = "gpk0-1";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd0_cd: sd0-cd {
+                        samsung,pins = "gpk0-2";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd0_bus1: sd0-bus-width1 {
+                        samsung,pins = "gpk0-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd0_bus4: sd0-bus-width4 {
+                        samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd0_bus8: sd0-bus-width8 {
+                        samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd4_clk: sd4-clk {
+                        samsung,pins = "gpk0-0";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd4_cmd: sd4-cmd {
+                        samsung,pins = "gpk0-1";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd4_cd: sd4-cd {
+                        samsung,pins = "gpk0-2";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd4_bus1: sd4-bus-width1 {
+                        samsung,pins = "gpk0-3";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd4_bus4: sd4-bus-width4 {
+                        samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd4_bus8: sd4-bus-width8 {
+                        samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <4>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd1_clk: sd1-clk {
+                        samsung,pins = "gpk1-0";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd1_cmd: sd1-cmd {
+                        samsung,pins = "gpk1-1";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd1_cd: sd1-cd {
+                        samsung,pins = "gpk1-2";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd1_bus1: sd1-bus-width1 {
+                        samsung,pins = "gpk1-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd1_bus4: sd1-bus-width4 {
+                        samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd2_clk: sd2-clk {
+                        samsung,pins = "gpk2-0";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd2_cmd: sd2-cmd {
+                        samsung,pins = "gpk2-1";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd2_cd: sd2-cd {
+                        samsung,pins = "gpk2-2";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd2_bus1: sd2-bus-width1 {
+                        samsung,pins = "gpk2-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd2_bus4: sd2-bus-width4 {
+                        samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd2_bus8: sd2-bus-width8 {
+                        samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd3_clk: sd3-clk {
+                        samsung,pins = "gpk3-0";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd3_cmd: sd3-cmd {
+                        samsung,pins = "gpk3-1";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd3_cd: sd3-cd {
+                        samsung,pins = "gpk3-2";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd3_bus1: sd3-bus-width1 {
+                        samsung,pins = "gpk3-3";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                sd3_bus4: sd3-bus-width4 {
+                        samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+                        samsung,pin-function = <2>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                keypad_col0: keypad-col0 {
+                        samsung,pins = "gpl2-0";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                keypad_col1: keypad-col1 {
+                        samsung,pins = "gpl2-1";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                keypad_col2: keypad-col2 {
+                        samsung,pins = "gpl2-2";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                keypad_col3: keypad-col3 {
+                        samsung,pins = "gpl2-3";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                keypad_col4: keypad-col4 {
+                        samsung,pins = "gpl2-4";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                keypad_col5: keypad-col5 {
+                        samsung,pins = "gpl2-5";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                keypad_col6: keypad-col6 {
+                        samsung,pins = "gpl2-6";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                keypad_col7: keypad-col7 {
+                        samsung,pins = "gpl2-7";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                cam_port_b: cam-port-b {
+                        samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+                                        "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+                                        "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
+                                        "gpm2-2";
+                        samsung,pin-function = <3>;
+                        samsung,pin-pud = <3>;
+                        samsung,pin-drv = <0>;
+                };
+
+                eint0: ext-int0 {
+                        samsung,pins = "gpx0-0";
+                        samsung,pin-function = <0xf>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                eint8: ext-int8 {
+                        samsung,pins = "gpx1-0";
+                        samsung,pin-function = <0xf>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                eint15: ext-int15 {
+                        samsung,pins = "gpx1-7";
+                        samsung,pin-function = <0xf>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                eint16: ext-int16 {
+                        samsung,pins = "gpx2-0";
+                        samsung,pin-function = <0xf>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                eint31: ext-int31 {
+                        samsung,pins = "gpx3-7";
+                        samsung,pin-function = <0xf>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+        };
+
+        pinctrl@03860000 {
+                gpz: gpz {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                i2s0_bus: i2s0-bus {
+                        samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+                                        "gpz-4", "gpz-5", "gpz-6";
+                        samsung,pin-function = <0x2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+
+                pcm0_bus: pcm0-bus {
+                        samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+                                        "gpz-4";
+                        samsung,pin-function = <0x3>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+        };
+
+        pinctrl@106E0000 {
+                gpv0: gpv0 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpv1: gpv1 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpv2: gpv2 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpv3: gpv3 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                gpv4: gpv4 {
+                        gpio-controller;
+                        #gpio-cells = <2>;
+
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+
+                c2c_bus: c2c-bus {
+                        samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+                                        "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+                                        "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+                                        "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
+                                        "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+                                        "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+                                        "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+                                        "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
+                                        "gpv4-0", "gpv4-1";
+                        samsung,pin-function = <0x2>;
+                        samsung,pin-pud = <0>;
+                        samsung,pin-drv = <0>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
new file mode 100644
index 000000000000..179a62e46c9d
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -0,0 +1,69 @@
+/*
+ * Samsung's Exynos4x12 SoCs device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "exynos4.dtsi"
+/include/ "exynos4x12-pinctrl.dtsi"
+
+/ {
+        aliases {
+                pinctrl0 = &pinctrl_0;
+                pinctrl1 = &pinctrl_1;
+                pinctrl2 = &pinctrl_2;
+                pinctrl3 = &pinctrl_3;
+        };
+
+        combiner:interrupt-controller@10440000 {
+                interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+                             <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+                             <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+                             <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+                             <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
+        };
+
+        pinctrl_0: pinctrl@11400000 {
+                compatible = "samsung,pinctrl-exynos4x12";
+                reg = <0x11400000 0x1000>;
+                interrupts = <0 47 0>;
+        };
+
+        pinctrl_1: pinctrl@11000000 {
+                compatible = "samsung,pinctrl-exynos4x12";
+                reg = <0x11000000 0x1000>;
+                interrupts = <0 46 0>;
+
+                wakup_eint: wakeup-interrupt-controller {
+                        compatible = "samsung,exynos4210-wakeup-eint";
+                        interrupt-parent = <&gic>;
+                        interrupts = <0 32 0>;
+                };
+        };
+
+        pinctrl_2: pinctrl@03860000 {
+                compatible = "samsung,pinctrl-exynos4x12";
+                reg = <0x03860000 0x1000>;
+                interrupt-parent = <&combiner>;
+                interrupts = <10 0>;
+        };
+
+        pinctrl_3: pinctrl@106E0000 {
+                compatible = "samsung,pinctrl-exynos4x12";
+                reg = <0x106E0000 0x1000>;
+                interrupts = <0 72 0>;
+        };
+};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 9ca4ca70c1bc..6d31aa383460 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -69,6 +69,7 @@
                                 interrupts = <13>, <56>;
                                 interrupt-names = "gpmi-dma", "bch";
                                 clocks = <&clks 34>;
+                                clock-names = "gpmi_io";
                                 fsl,gpmi-dma-channel = <4>;
                                 status = "disabled";
                         };
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index e16d63155480..55c57ea6169e 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -85,6 +85,7 @@
                                 interrupts = <88>, <41>;
                                 interrupt-names = "gpmi-dma", "bch";
                                 clocks = <&clks 50>;
+                                clock-names = "gpmi_io";
                                 fsl,gpmi-dma-channel = <4>;
                                 status = "disabled";
                         };
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 15df4c105e89..5bfa02a3f85c 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -37,6 +37,13 @@
                                         pinctrl_hog: hoggrp {
                                                 fsl,pins = <
                                                         176  0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+                                                >;
+                                        };
+                                };
+
+                                arm2 {
+                                        pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+                                                fsl,pins = <
                                                         1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
                                                         1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
                                                 >;
@@ -58,7 +65,8 @@
                                 wp-gpios = <&gpio6 14 0>;
                                 vmmc-supply = <&reg_3p3v>;
                                 pinctrl-names = "default";
-                                pinctrl-0 = <&pinctrl_usdhc3_1>;
+                                pinctrl-0 = <&pinctrl_usdhc3_1
+                                             &pinctrl_usdhc3_arm2>;
                                 status = "okay";
                         };
 
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 8ac51c08269d..8fea375c734d 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -48,17 +48,19 @@
                 #size-cells = <0>;
                 button@1 {
                         label = "Function Button";
-                        linux,code = <132>;
+                        linux,code = <357>;
                         gpios = <&gpio1 9 1>;
                 };
                 button@2 {
                         label = "Power-on Switch";
-                        linux,code = <116>;
+                        linux,code = <0>;
+                        linux,input-type = <5>;
                         gpios = <&gpio1 10 1>;
                 };
                 button@3 {
                         label = "Power-auto Switch";
-                        linux,code = <142>;
+                        linux,code = <1>;
+                        linux,input-type = <5>;
                         gpios = <&gpio1 11 1>;
                 };
         };
@@ -67,28 +69,28 @@
                 compatible = "gpio-leds";
 
                 led@1 {
-                        label = "lschlv2:blue:func";
+                        label = "lsxl:blue:func";
                         gpios = <&gpio1 4 1>;
                 };
 
                 led@2 {
-                        label = "lschlv2:red:alarm";
+                        label = "lsxl:red:alarm";
                         gpios = <&gpio1 5 1>;
                 };
 
                 led@3 {
-                        label = "lschlv2:amber:info";
+                        label = "lsxl:amber:info";
                         gpios = <&gpio1 6 1>;
                 };
 
                 led@4 {
-                        label = "lschlv2:blue:power";
+                        label = "lsxl:blue:power";
                         gpios = <&gpio1 7 1>;
                         linux,default-trigger = "default-on";
                 };
 
                 led@5 {
-                        label = "lschlv2:red:func";
+                        label = "lsxl:red:func";
                         gpios = <&gpio1 16 1>;
                 };
         };
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index f38ea8771b44..696e929d0304 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -257,7 +257,7 @@
                         interrupt-names = "common", "tx", "rx", "sidetone";
                         interrupt-parent = <&intc>;
                         ti,buffer-size = <1280>;
-                        ti,hwmods = "mcbsp2";
+                        ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
                 };
 
                 mcbsp3: mcbsp@49024000 {
@@ -272,7 +272,7 @@
                         interrupt-names = "common", "tx", "rx", "sidetone";
                         interrupt-parent = <&intc>;
                         ti,buffer-size = <128>;
-                        ti,hwmods = "mcbsp3";
+                        ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
                 };
 
                 mcbsp4: mcbsp@49026000 {
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index b459691655ab..330f833ac3b0 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -71,13 +71,13 @@
                 ehci@d8007100 {
                         compatible = "via,vt8500-ehci";
                         reg = <0xd8007100 0x200>;
-                        interrupts = <43>;
+                        interrupts = <1>;
                 };
 
                 uhci@d8007300 {
                         compatible = "platform-uhci";
                         reg = <0xd8007300 0x200>;
-                        interrupts = <43>;
+                        interrupts = <0>;
                 };
 
                 fb@d8050800 {
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 66aa7a6db884..394ded624e37 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -139,6 +139,7 @@ CONFIG_I2C_IMX=y
 CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MC9S08DZ60=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
@@ -155,6 +156,7 @@ CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_VIDEO_MX3=y
 CONFIG_FB=y
+CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index 7bcf850eddcd..3458752c4bb2 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -1,6 +1,6 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
@@ -9,10 +9,12 @@ CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_MVEBU=y
-CONFIG_MACH_ARMADA_370_XP=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_XP=y
+# CONFIG_CACHE_L2X0 is not set
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_USE_OF=y
+# CONFIG_COMPACTION is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
@@ -23,6 +25,8 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index cdd4d2bd3962..2ba9e63d0f17 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -1,3 +1,4 @@
+CONFIG_ARCH_VERSATILE=y
 CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h
index 59426a4595c9..e847d23351ed 100644
--- a/arch/arm/include/asm/flat.h
+++ b/arch/arm/include/asm/flat.h
@@ -8,7 +8,7 @@
 #define flat_argvp_envp_on_stack()              1
 #define flat_old_ram_flag(flags)                (flags)
 #define flat_reloc_valid(reloc, size)           ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
+#define flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp))
 #define flat_put_addr_at_rp(rp, val, relval)    put_unaligned(val,rp)
 #define flat_get_relocate_addr(rel)             (rel)
 #define flat_set_persistent(relval, p)          0
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 77bd79f2ffdb..7e1f76027f66 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -200,8 +200,8 @@ extern int __put_user_8(void *, unsigned long long);
 #define USER_DS                 KERNEL_DS
 
 #define segment_eq(a,b)         (1)
-#define __addr_ok(addr)         (1)
-#define __range_ok(addr,size)   (0)
+#define __addr_ok(addr)         ((void)(addr),1)
+#define __range_ok(addr,size)   ((void)(addr),0)
 #define get_fs()                (KERNEL_DS)
 
 static inline void set_fs(mm_segment_t fs)
diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h
index ae05e56dd17d..5000397134b4 100644
--- a/arch/arm/include/asm/xen/interface.h
+++ b/arch/arm/include/asm/xen/interface.h
@@ -29,16 +29,22 @@
 
 #ifndef __ASSEMBLY__
 /* Explicitly size integers that represent pfns in the interface with
- * Xen so that we can have one ABI that works for 32 and 64 bit guests. */
+ * Xen so that we can have one ABI that works for 32 and 64 bit guests.
+ * Note that this means that the xen_pfn_t type may be capable of
+ * representing pfn's which the guest cannot represent in its own pfn
+ * type. However since pfn space is controlled by the guest this is
+ * fine since it simply wouldn't be able to create any sure pfns in
+ * the first place.
+ */
 typedef uint64_t xen_pfn_t;
+#define PRI_xen_pfn "llx"
 typedef uint64_t xen_ulong_t;
+#define PRI_xen_ulong "llx"
 /* Guest handles for primitive C types. */
 __DEFINE_GUEST_HANDLE(uchar, unsigned char);
 __DEFINE_GUEST_HANDLE(uint,  unsigned int);
-__DEFINE_GUEST_HANDLE(ulong, unsigned long);
 DEFINE_GUEST_HANDLE(char);
 DEFINE_GUEST_HANDLE(int);
-DEFINE_GUEST_HANDLE(long);
 DEFINE_GUEST_HANDLE(void);
 DEFINE_GUEST_HANDLE(uint64_t);
 DEFINE_GUEST_HANDLE(uint32_t);
diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h
index 174202318dff..c6b9096cef95 100644
--- a/arch/arm/include/asm/xen/page.h
+++ b/arch/arm/include/asm/xen/page.h
@@ -10,7 +10,7 @@
 #include <xen/interface/grant_table.h>
 
 #define pfn_to_mfn(pfn)                 (pfn)
-#define phys_to_machine_mapping_valid   (1)
+#define phys_to_machine_mapping_valid(pfn) (1)
 #define mfn_to_pfn(mfn)                 (mfn)
 #define mfn_to_virt(m)                  (__va(mfn_to_pfn(m) << PAGE_SHIFT))
 
@@ -30,6 +30,8 @@ typedef struct xpaddr {
 #define XMADDR(x)       ((xmaddr_t) { .maddr = (x) })
 #define XPADDR(x)       ((xpaddr_t) { .paddr = (x) })
 
+#define INVALID_P2M_ENTRY      (~0UL)
+
 static inline xmaddr_t phys_to_machine(xpaddr_t phys)
 {
         unsigned offset = phys.paddr & ~PAGE_MASK;
@@ -74,9 +76,14 @@ static inline int m2p_remove_override(struct page *page, bool clear_pte)
         return 0;
 }
 
+static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+        BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
+        return true;
+}
+
 static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 {
-        BUG();
-        return false;
+        return __set_phys_to_machine(pfn, mfn);
 }
 #endif /* _ASM_ARM_XEN_PAGE_H */
diff --git a/arch/arm/include/debug/8250_32.S b/arch/arm/include/debug/8250_32.S
new file mode 100644
index 000000000000..8db01eeabbb4
--- /dev/null
+++ b/arch/arm/include/debug/8250_32.S
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+
+#include <linux/serial_reg.h>
+
+                .macro  senduart,rd,rx
+                str     \rd, [\rx, #UART_TX << UART_SHIFT]
+                .endm
+
+                .macro  busyuart,rd,rx
+1002:           ldr     \rd, [\rx, #UART_LSR << UART_SHIFT]
+                and     \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+                teq     \rd, #UART_LSR_TEMT | UART_LSR_THRE
+                bne     1002b
+                .endm
+
+                /* The UART's don't have any flow control IO's wired up. */
+                .macro  waituart,rd,rx
+                .endm
diff --git a/arch/arm/include/debug/picoxcell.S b/arch/arm/include/debug/picoxcell.S
index 7419deb1b948..bc1f07c49cd4 100644
--- a/arch/arm/include/debug/picoxcell.S
+++ b/arch/arm/include/debug/picoxcell.S
@@ -5,10 +5,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
- * accesses to the 8250.
  */
-#include <linux/serial_reg.h>
 
 #define UART_SHIFT 2
 #define PICOXCELL_UART1_BASE            0x80230000
@@ -19,17 +16,4 @@
                 ldr     \rp, =PICOXCELL_UART1_BASE
                 .endm
 
-                .macro  senduart,rd,rx
-                str     \rd, [\rx, #UART_TX << UART_SHIFT]
-                .endm
-
-                .macro  busyuart,rd,rx
-1002:           ldr     \rd, [\rx, #UART_LSR << UART_SHIFT]
-                and     \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-                teq     \rd, #UART_LSR_TEMT | UART_LSR_THRE
-                bne     1002b
-                .endm
-
-                /* The UART's don't have any flow control IO's wired up. */
-                .macro  waituart,rd,rx
-                .endm
+#include "8250_32.S"
diff --git a/arch/arm/include/debug/socfpga.S b/arch/arm/include/debug/socfpga.S
index d6f26d23374f..966b2f994946 100644
--- a/arch/arm/include/debug/socfpga.S
+++ b/arch/arm/include/debug/socfpga.S
@@ -7,6 +7,9 @@
  * published by the Free Software Foundation.
  */
 
+#define UART_SHIFT 2
+#define DEBUG_LL_UART_OFFSET    0x00002000
+
                 .macro  addruart, rp, rv, tmp
                 mov     \rp, #DEBUG_LL_UART_OFFSET
                 orr     \rp, \rp, #0x00c00000
@@ -14,3 +17,5 @@
                 orr     \rp, \rp, #0xff000000   @ physical base
                 .endm
 
+#include "8250_32.S"
+
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 417bac1846bd..34711757ba59 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -88,9 +88,9 @@ ENTRY(ret_from_fork)
         bl      schedule_tail
         cmp     r5, #0
         movne   r0, r4
-        movne   lr, pc
+        adrne   lr, BSYM(1f)
         movne   pc, r5
-        get_thread_info tsk
+1:      get_thread_info tsk
         b       ret_slow_syscall
 ENDPROC(ret_from_fork)
 
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 16cedb42c0c3..896165096d6a 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -34,6 +34,7 @@
 #include <linux/list.h>
 #include <linux/kallsyms.h>
 #include <linux/proc_fs.h>
+#include <linux/export.h>
 
 #include <asm/exception.h>
 #include <asm/mach/arch.h>
@@ -109,6 +110,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
         /* Order is clear bits in "clr" then set bits in "set" */
         irq_modify_status(irq, clr, set & ~clr);
 }
+EXPORT_SYMBOL_GPL(set_irq_flags);
 
 void __init init_IRQ(void)
 {
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index 38c1a3b103a0..839312905067 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -366,7 +366,9 @@ void kprobe_arm_test_cases(void)
         TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
         TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
         TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+#endif
 
+#if __LINUX_ARM_ARCH__ >= 7
         TEST_RRR(  "mls         r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
         TEST_RRR(  "mlshi       r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
         TEST_RR(   "mls         lr, r",1, VAL2,", r",2, VAL3,", r13")
@@ -456,6 +458,8 @@ void kprobe_arm_test_cases(void)
         TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */
 #if __LINUX_ARM_ARCH__ >= 6
         TEST_UNSUPPORTED("ldrex r2, [sp]")
+#endif
+#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K)
         TEST_UNSUPPORTED("strexd        r0, r2, r3, [sp]")
         TEST_UNSUPPORTED("ldrexd        r2, r3, [sp]")
         TEST_UNSUPPORTED("strexb        r0, r2, [sp]")
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index e29c3337ca81..8ef8c9337809 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -45,10 +45,9 @@ int machine_kexec_prepare(struct kimage *image)
         for (i = 0; i < image->nr_segments; i++) {
                 current_segment = &image->segment[i];
 
-                err = memblock_is_region_memory(current_segment->mem,
-                                                current_segment->memsz);
-                if (err)
-                        return - EINVAL;
+                if (!memblock_is_region_memory(current_segment->mem,
+                                               current_segment->memsz))
+                        return -EINVAL;
 
                 err = get_user(header, (__be32*)current_segment->buf);
                 if (err)
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 93971b1a4f0b..53c0304b734a 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -96,6 +96,10 @@ armpmu_event_set_period(struct perf_event *event,
         s64 period = hwc->sample_period;
         int ret = 0;
 
+        /* The period may have been changed by PERF_EVENT_IOC_PERIOD */
+        if (unlikely(period != hwc->last_period))
+                left = period - (hwc->last_period - left);
+
         if (unlikely(left <= -period)) {
                 left = period;
                 local64_set(&hwc->period_left, left);
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8e20754dd31d..fbc8b2623d82 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -294,18 +294,24 @@ static void percpu_timer_setup(void);
 asmlinkage void __cpuinit secondary_start_kernel(void)
 {
         struct mm_struct *mm = &init_mm;
-        unsigned int cpu = smp_processor_id();
+        unsigned int cpu;
+
+        /*
+         * The identity mapping is uncached (strongly ordered), so
+         * switch away from it before attempting any exclusive accesses.
+         */
+        cpu_switch_mm(mm->pgd, mm);
+        enter_lazy_tlb(mm, current);
+        local_flush_tlb_all();
 
         /*
          * All kernel threads share the same mm context; grab a
          * reference and switch to it.
          */
+        cpu = smp_processor_id();
         atomic_inc(&mm->mm_count);
         current->active_mm = mm;
         cpumask_set_cpu(cpu, mm_cpumask(mm));
-        cpu_switch_mm(mm->pgd, mm);
-        enter_lazy_tlb(mm, current);
-        local_flush_tlb_all();
 
         printk("CPU%u: Booted secondary processor\n", cpu);
 
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index e1f906989bb8..b22d700fea27 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -42,10 +42,10 @@ static void twd_set_mode(enum clock_event_mode mode,
 
         switch (mode) {
         case CLOCK_EVT_MODE_PERIODIC:
-                /* timer load already set up */
                 ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
                         | TWD_TIMER_CONTROL_PERIODIC;
-                __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD);
+                __raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
+                        twd_base + TWD_TIMER_LOAD);
                 break;
         case CLOCK_EVT_MODE_ONESHOT:
                 /* period set, and timer enabled in 'next_event' hook */
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index 9d0a30032d7f..0dc53854a5d8 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -45,6 +45,7 @@ int read_current_timer(unsigned long *timer_val)
         *timer_val = delay_timer->read_current_timer();
         return 0;
 }
+EXPORT_SYMBOL_GPL(read_current_timer);
 
 static void __timer_delay(unsigned long cycles)
 {
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index b14207101938..043624219b55 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -21,19 +21,13 @@ config SOC_AT91SAM9
         bool
         select CPU_ARM926T
         select GENERIC_CLOCKEVENTS
+        select MULTI_IRQ_HANDLER
+        select SPARSE_IRQ
 
 menu "Atmel AT91 System-on-Chip"
 
 comment "Atmel AT91 Processor"
 
-config SOC_AT91SAM9
-        bool
-        select AT91_SAM9_SMC
-        select AT91_SAM9_TIME
-        select CPU_ARM926T
-        select MULTI_IRQ_HANDLER
-        select SPARSE_IRQ
-
 config SOC_AT91RM9200
         bool "AT91RM9200"
         select CPU_ARM920T
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index b4f0565aff63..5269825194a8 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -187,7 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
-        CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk),
+        CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
         CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index a563189cdfc3..1e122bcd7845 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -479,7 +479,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91rm9200_twi_device = {
         .name                   = "i2c-gpio",
-        .id                     = -1,
+        .id                     = 0,
         .dev.platform_data      = &pdata,
 };
 
@@ -512,7 +512,7 @@ static struct resource twi_resources[] = {
 
 static struct platform_device at91rm9200_twi_device = {
         .name           = "i2c-at91rm9200",
-        .id             = -1,
+        .id             = 0,
         .resource       = twi_resources,
         .num_resources  = ARRAY_SIZE(twi_resources),
 };
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index ad29f93f20ca..f8202615f4a8 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -211,8 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
         CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
-        CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
-        CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk),
+        CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
+        CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk),
         /* more usart lookup table for DT entries */
         CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
         CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index a76b8684f52d..aa1e58729885 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -389,7 +389,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9260_twi_device = {
         .name                   = "i2c-gpio",
-        .id                     = -1,
+        .id                     = 0,
         .dev.platform_data      = &pdata,
 };
 
@@ -421,7 +421,7 @@ static struct resource twi_resources[] = {
 };
 
 static struct platform_device at91sam9260_twi_device = {
-        .id             = -1,
+        .id             = 0,
         .resource       = twi_resources,
         .num_resources  = ARRAY_SIZE(twi_resources),
 };
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 8d999eb1a137..04295c04b3e0 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -178,8 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
-        CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk),
-        CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk),
+        CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk),
+        CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk),
         CLKDEV_CON_ID("pioA", &pioA_clk),
         CLKDEV_CON_ID("pioB", &pioB_clk),
         CLKDEV_CON_ID("pioC", &pioC_clk),
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 9752f17efba9..b9487696b7be 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -285,7 +285,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9261_twi_device = {
         .name                   = "i2c-gpio",
-        .id                     = -1,
+        .id                     = 0,
         .dev.platform_data      = &pdata,
 };
 
@@ -317,7 +317,7 @@ static struct resource twi_resources[] = {
 };
 
 static struct platform_device at91sam9261_twi_device = {
-        .id             = -1,
+        .id             = 0,
         .resource       = twi_resources,
         .num_resources  = ARRAY_SIZE(twi_resources),
 };
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 6a01d0360dfb..d6f9c23927c4 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -193,7 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
         CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
         CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
-        CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
+        CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
         CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 8dde220b42b6..cb85da2eccea 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -567,7 +567,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9263_twi_device = {
         .name                   = "i2c-gpio",
-        .id                     = -1,
+        .id                     = 0,
         .dev.platform_data      = &pdata,
 };
 
@@ -600,7 +600,7 @@ static struct resource twi_resources[] = {
 
 static struct platform_device at91sam9263_twi_device = {
         .name           = "i2c-at91sam9260",
-        .id             = -1,
+        .id             = 0,
         .resource       = twi_resources,
         .num_resources  = ARRAY_SIZE(twi_resources),
 };
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index d6ca0543ce8d..5047bdc92adf 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -314,7 +314,7 @@ static struct i2c_gpio_platform_data pdata = {
 
 static struct platform_device at91sam9rl_twi_device = {
         .name                   = "i2c-gpio",
-        .id                     = -1,
+        .id                     = 0,
         .dev.platform_data      = &pdata,
 };
 
@@ -347,7 +347,7 @@ static struct resource twi_resources[] = {
 
 static struct platform_device at91sam9rl_twi_device = {
         .name           = "i2c-at91sam9g20",
-        .id             = -1,
+        .id             = 0,
         .resource       = twi_resources,
         .num_resources  = ARRAY_SIZE(twi_resources),
 };
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 6bd7300a2bc5..bb7f54474b92 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -88,6 +88,6 @@ void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS])
         if (!priority)
                 priority = at91x40_default_irq_priority;
 
-        at91_aic_init(priority);
+        at91_aic_init(priority, at91_extern_irq);
 }
 
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 9cda3fd346ae..6960778af4c2 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -129,7 +129,7 @@ static struct spi_board_info neocore926_spi_devices[] = {
                 .max_speed_hz   = 125000 * 16,
                 .bus_num        = 0,
                 .platform_data  = &ads_info,
-                .irq            = AT91SAM9263_ID_IRQ1,
+                .irq            = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
         },
 #endif
 };
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 27b3af1a3047..a9167dd45f96 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -309,7 +309,7 @@ static struct spi_board_info ek_spi_devices[] = {
                 .max_speed_hz   = 125000 * 26,  /* (max sample rate @ 3V) * (cmd + data + overhead) */
                 .bus_num        = 0,
                 .platform_data  = &ads_info,
-                .irq            = AT91SAM9261_ID_IRQ0,
+                .irq            = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0,
                 .controller_data = (void *) AT91_PIN_PA28,      /* CS pin */
         },
 #endif
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 073e17403d98..b87dbe2be0d6 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -132,7 +132,7 @@ static struct spi_board_info ek_spi_devices[] = {
                 .max_speed_hz   = 125000 * 26,  /* (max sample rate @ 3V) * (cmd + data + overhead) */
                 .bus_num        = 0,
                 .platform_data  = &ads_info,
-                .irq            = AT91SAM9263_ID_IRQ1,
+                .irq            = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
         },
 #endif
 };
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index f49650677653..b62f560e6c75 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -26,7 +26,8 @@ extern void __init at91_dt_initialize(void);
 extern void __init at91_init_irq_default(void);
 extern void __init at91_init_interrupts(unsigned int priority[]);
 extern void __init at91x40_init_interrupts(unsigned int priority[]);
-extern void __init at91_aic_init(unsigned int priority[]);
+extern void __init at91_aic_init(unsigned int priority[],
+                                 unsigned int ext_irq_mask);
 extern int  __init at91_aic_of_init(struct device_node *node,
                                     struct device_node *parent);
 extern int  __init at91_aic5_of_init(struct device_node *node,
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 1e02c0e49dcc..febc2ee901a5 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -502,14 +502,19 @@ int __init at91_aic5_of_init(struct device_node *node,
 /*
  * Initialize the AIC interrupt controller.
  */
-void __init at91_aic_init(unsigned int *priority)
+void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask)
 {
         unsigned int i;
         int irq_base;
 
-        if (at91_aic_pm_init())
+        at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs)
+                                  * sizeof(*at91_extern_irq), GFP_KERNEL);
+
+        if (at91_aic_pm_init() || at91_extern_irq == NULL)
                 panic("Unable to allocate bit maps\n");
 
+        *at91_extern_irq = ext_irq_mask;
+
         at91_aic_base = ioremap(AT91_AIC, 512);
         if (!at91_aic_base)
                 panic("Unable to ioremap AIC registers\n");
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index da9881b161e1..0b32c81730a5 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -47,7 +47,7 @@ void __init at91_init_irq_default(void)
 void __init at91_init_interrupts(unsigned int *priority)
 {
         /* Initialize the AIC interrupt controller */
-        at91_aic_init(priority);
+        at91_aic_init(priority, at91_extern_irq);
 
         /* Enable GPIO interrupts */
         at91_gpio_irq_setup();
@@ -151,7 +151,7 @@ static void __init soc_detect(u32 dbgu_base)
         }
 
         /* at91sam9g10 */
-        if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+        if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
                 at91_soc_initdata.type = AT91_SOC_SAM9G10;
                 at91_boot_soc = at91sam9261_soc;
         }
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index b37bef1d5ffa..f723fe13d0f0 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -32,6 +32,7 @@
 #include <linux/irq.h>
 #include <plat/time.h>
 #include <linux/platform_data/usb-ehci-orion.h>
+#include <plat/irq.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
 #include "common.h"
@@ -109,8 +110,8 @@ static void __init dove_clk_init(void)
 
         orion_clkdev_add(NULL, "orion-ehci.0", usb0);
         orion_clkdev_add(NULL, "orion-ehci.1", usb1);
-        orion_clkdev_add(NULL, "mv643xx_eth.0", ge);
-        orion_clkdev_add("0", "sata_mv.0", sata);
+        orion_clkdev_add(NULL, "mv643xx_eth_port.0", ge);
+        orion_clkdev_add(NULL, "sata_mv.0", sata);
         orion_clkdev_add("0", "pcie", pex0);
         orion_clkdev_add("1", "pcie", pex1);
         orion_clkdev_add(NULL, "sdhci-dove.0", sdio0);
@@ -399,7 +400,7 @@ static void __init dove_dt_init(void)
                 (dove_tclk + 499999) / 1000000);
 
 #ifdef CONFIG_CACHE_TAUROS2
-        tauros2_init();
+        tauros2_init(0);
 #endif
         dove_setup_cpu_mbus();
 
@@ -415,7 +416,6 @@ static void __init dove_dt_init(void)
         dove_ehci0_init();
         dove_ehci1_init();
         dove_pcie_init(1, 1);
-        dove_crypto_init();
 
         of_platform_populate(NULL, of_default_bus_match_table,
                              dove_auxdata_lookup, NULL);
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index bb15b26041cb..0ef4435b1657 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/clk.h>
 #include <video/vga.h>
 #include <asm/mach/pci.h>
 #include <asm/mach/arch.h>
@@ -188,6 +189,10 @@ static void __init add_pcie_port(int index, void __iomem *base)
 
         if (orion_pcie_link_up(base)) {
                 struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+                struct clk *clk = clk_get_sys("pcie", (index ? "1" : "0"));
+
+                if (!IS_ERR(clk))
+                        clk_prepare_enable(clk);
 
                 printk(KERN_INFO "link up\n");
 
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 715b690e5009..4af8284f3597 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -47,6 +47,7 @@
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 #include <plat/tv-core.h>
+#include <plat/spi-core.h>
 #include <plat/regs-serial.h>
 
 #include "common.h"
@@ -346,6 +347,8 @@ static void __init exynos4_map_io(void)
 
         s5p_fb_setname(0, "exynos4-fb");
         s5p_hdmi_setname("exynos4-hdmi");
+
+        s3c64xx_spi_setname("exynos4210-spi");
 }
 
 static void __init exynos5_map_io(void)
@@ -366,6 +369,8 @@ static void __init exynos5_map_io(void)
         s3c_i2c0_setname("s3c2440-i2c");
         s3c_i2c1_setname("s3c2440-i2c");
         s3c_i2c2_setname("s3c2440-i2c");
+
+        s3c64xx_spi_setname("exynos4210-spi");
 }
 
 static void __init exynos4_init_clocks(int xtal)
@@ -992,11 +997,14 @@ static int __init exynos_init_irq_eint(void)
          * platforms switch over to using the pinctrl driver, the wakeup
          * interrupt support code here can be completely removed.
          */
+        static const struct of_device_id exynos_pinctrl_ids[] = {
+                { .compatible = "samsung,pinctrl-exynos4210", },
+                { .compatible = "samsung,pinctrl-exynos4x12", },
+        };
         struct device_node *pctrl_np, *wkup_np;
-        const char *pctrl_compat = "samsung,pinctrl-exynos4210";
         const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
 
-        for_each_compatible_node(pctrl_np, NULL, pctrl_compat) {
+        for_each_matching_node(pctrl_np, exynos_pinctrl_ids) {
                 if (of_device_is_available(pctrl_np)) {
                         wkup_np = of_find_compatible_node(pctrl_np, NULL,
                                                         wkup_compat);
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 0276ae44777a..8858068d2b6a 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -96,11 +96,14 @@ static void __init exynos4_dt_machine_init(void)
 
 static char const *exynos4_dt_compat[] __initdata = {
         "samsung,exynos4210",
+        "samsung,exynos4212",
+        "samsung,exynos4412",
         NULL
 };
 
 DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
         /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
+        .smp            = smp_ops(exynos_smp_ops),
         .init_irq       = exynos4_init_irq,
         .map_io         = exynos4_dt_map_io,
         .handle_irq     = gic_handle_irq,
diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c
index 1a7a8dd045a1..1ab91b5209e6 100644
--- a/arch/arm/mach-imx/clk-busy.c
+++ b/arch/arm/mach-imx/clk-busy.c
@@ -108,7 +108,7 @@ struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
         busy->div.hw.init = &init;
 
         clk = clk_register(NULL, &busy->div.hw);
-        if (!clk)
+        if (IS_ERR(clk))
                 kfree(busy);
 
         return clk;
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index d20d4795f4ea..01e2f843bf2e 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -127,8 +127,8 @@ int __init mx25_clocks_init(void)
         clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0),  4);
         clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0),  5);
         clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0),  6);
-        clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0),  7);
-        clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0),  8);
+        clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0),  7);
+        clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0),  8);
         clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
         clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
         clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 3b6b640eed24..366e5d59d886 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -109,7 +109,7 @@ int __init mx27_clocks_init(unsigned long fref)
         clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
         clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
         clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
-        clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3);
+        clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
         clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3);
         clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
         clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
@@ -121,7 +121,7 @@ int __init mx27_clocks_init(unsigned long fref)
         clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
         clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
         clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
-        clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3);
+        clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
         clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
         clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
         clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 9d2c843bde02..b5deb0554552 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -108,9 +108,8 @@ void __init imx3_init_l2x0(void)
         }
 
         l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
-        if (IS_ERR(l2x0_base)) {
-                printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
-                                PTR_ERR(l2x0_base));
+        if (!l2x0_base) {
+                printk(KERN_ERR "remapping L2 cache area failed\n");
                 return;
         }
 
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 70c5a2882409..d94872fed8c0 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -51,9 +51,7 @@ static void __init kirkwood_dt_init(void)
 
         kirkwood_setup_cpu_mbus();
 
-#ifdef CONFIG_CACHE_FEROCEON_L2
         kirkwood_l2_init();
-#endif
 
         /* Setup root of clk tree */
         kirkwood_clk_init();
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 3991077f58a2..2c6c218fb79e 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -633,6 +633,7 @@ char * __init kirkwood_id(void)
 
 void __init kirkwood_l2_init(void)
 {
+#ifdef CONFIG_CACHE_FEROCEON_L2
 #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
         writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
         feroceon_l2_init(1);
@@ -640,6 +641,7 @@ void __init kirkwood_l2_init(void)
         writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
         feroceon_l2_init(0);
 #endif
+#endif
 }
 
 void __init kirkwood_init(void)
@@ -657,9 +659,7 @@ void __init kirkwood_init(void)
 
         kirkwood_setup_cpu_mbus();
 
-#ifdef CONFIG_CACHE_FEROCEON_L2
         kirkwood_l2_init();
-#endif
 
         /* Setup root of clk tree */
         kirkwood_clk_init();
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 9518bf5996dc..e255164ff087 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -444,16 +444,28 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
         .lclk_khz_max   = 1334,         /* results in 5fps CIF, 10fps QCIF */
 };
 
+static struct platform_device ams_delta_audio_device = {
+        .name   = "ams-delta-audio",
+        .id     = -1,
+};
+
+static struct platform_device cx20442_codec_device = {
+        .name   = "cx20442-codec",
+        .id     = -1,
+};
+
 static struct platform_device *ams_delta_devices[] __initdata = {
         &latch1_gpio_device,
         &latch2_gpio_device,
         &ams_delta_kp_device,
         &ams_delta_camera_device,
+        &ams_delta_audio_device,
 };
 
 static struct platform_device *late_devices[] __initdata = {
         &ams_delta_nand_device,
         &ams_delta_lcd_device,
+        &cx20442_codec_device,
 };
 
 static void __init ams_delta_init(void)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 2a1a898c7f90..d669e227e00c 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -11,7 +11,6 @@ config ARCH_OMAP2PLUS_TYPICAL
         select I2C_OMAP
         select MENELAUS if ARCH_OMAP2
         select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
-        select PINCTRL
         select PM_RUNTIME
         select REGULATOR
         select SERIAL_OMAP
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 388c431c745a..d41ab98890ff 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -24,6 +24,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/opp.h>
+#include <linux/cpu.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -444,27 +445,31 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
-static void __init beagle_opp_init(void)
+static int __init beagle_opp_init(void)
 {
         int r = 0;
 
-        /* Initialize the omap3 opp table */
-        if (omap3_opp_init()) {
+        if (!machine_is_omap3_beagle())
+                return 0;
+
+        /* Initialize the omap3 opp table if not already created. */
+        r = omap3_opp_init();
+        if (IS_ERR_VALUE(r) && (r != -EEXIST)) {
                 pr_err("%s: opp default init failed\n", __func__);
-                return;
+                return r;
         }
 
         /* Custom OPP enabled for all xM versions */
         if (cpu_is_omap3630()) {
                 struct device *mpu_dev, *iva_dev;
 
-                mpu_dev = omap_device_get_by_hwmod_name("mpu");
+                mpu_dev = get_cpu_device(0);
                 iva_dev = omap_device_get_by_hwmod_name("iva");
 
                 if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) {
                         pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
                                 __func__, mpu_dev, iva_dev);
-                        return;
+                        return -ENODEV;
                 }
                 /* Enable MPU 1GHz and lower opps */
                 r = opp_enable(mpu_dev, 800000000);
@@ -484,8 +489,9 @@ static void __init beagle_opp_init(void)
                         opp_disable(iva_dev, 660000000);
                 }
         }
-        return;
+        return 0;
 }
+device_initcall(beagle_opp_init);
 
 static void __init omap3_beagle_init(void)
 {
@@ -522,8 +528,6 @@ static void __init omap3_beagle_init(void)
         /* Ensure SDRC pins are mux'd for self-refresh */
         omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
         omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-        beagle_opp_init();
 }
 
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 114ab4b8e0e3..1a45d6bd2539 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -1073,6 +1073,8 @@ static struct omap_clk am33xx_clks[] = {
         CLK(NULL,       "gfx_fck_div_ck",       &gfx_fck_div_ck,        CK_AM33XX),
         CLK(NULL,       "sysclkout_pre_ck",     &sysclkout_pre_ck,      CK_AM33XX),
         CLK(NULL,       "clkout2_ck",           &clkout2_ck,    CK_AM33XX),
+        CLK(NULL,       "timer_32k_ck",         &clkdiv32k_ick, CK_AM33XX),
+        CLK(NULL,       "timer_sys_ck",         &sys_clkin_ck,  CK_AM33XX),
 };
 
 int __init am33xx_clk_init(void)
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index d661d138f270..6efc30c961a5 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3294,7 +3294,7 @@ static struct omap_clk omap44xx_clks[] = {
         CLK(NULL,       "auxclk5_src_ck",               &auxclk5_src_ck,        CK_443X),
         CLK(NULL,       "auxclk5_ck",                   &auxclk5_ck,    CK_443X),
         CLK(NULL,       "auxclkreq5_ck",                &auxclkreq5_ck, CK_443X),
-        CLK(NULL,       "gpmc_ck",                      &dummy_ck,      CK_443X),
+        CLK("omap-gpmc",        "fck",                          &dummy_ck,      CK_443X),
         CLK("omap_i2c.1",       "ick",                          &dummy_ck,      CK_443X),
         CLK("omap_i2c.2",       "ick",                          &dummy_ck,      CK_443X),
         CLK("omap_i2c.3",       "ick",                          &dummy_ck,      CK_443X),
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index cbb879139c51..512e79a842cb 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -925,15 +925,18 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
         if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable)
                 return -EINVAL;
 
+        spin_lock_irqsave(&clkdm->lock, flags);
+
         /*
          * For arch's with no autodeps, clkcm_clk_enable
          * should be called for every clock instance or hwmod that is
          * enabled, so the clkdm can be force woken up.
          */
-        if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps)
+        if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) {
+                spin_unlock_irqrestore(&clkdm->lock, flags);
                 return 0;
+        }
 
-        spin_lock_irqsave(&clkdm->lock, flags);
         arch_clkdm->clkdm_clk_enable(clkdm);
         pwrdm_state_switch(clkdm->pwrdm.ptr);
         spin_unlock_irqrestore(&clkdm->lock, flags);
@@ -950,15 +953,19 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm)
         if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
                 return -EINVAL;
 
+        spin_lock_irqsave(&clkdm->lock, flags);
+
         if (atomic_read(&clkdm->usecount) == 0) {
+                spin_unlock_irqrestore(&clkdm->lock, flags);
                 WARN_ON(1); /* underflow */
                 return -ERANGE;
         }
 
-        if (atomic_dec_return(&clkdm->usecount) > 0)
+        if (atomic_dec_return(&clkdm->usecount) > 0) {
+                spin_unlock_irqrestore(&clkdm->lock, flags);
                 return 0;
+        }
 
-        spin_lock_irqsave(&clkdm->lock, flags);
         arch_clkdm->clkdm_clk_disable(clkdm);
         pwrdm_state_switch(clkdm->pwrdm.ptr);
         spin_unlock_irqrestore(&clkdm->lock, flags);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index c8c211731d26..cba60e05e32e 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -341,7 +341,7 @@ static void __init omap_init_dmic(void)
 
         oh = omap_hwmod_lookup("dmic");
         if (!oh) {
-                printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
+                pr_err("Could not look up dmic hw_mod\n");
                 return;
         }
 
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 5ac5cf30406a..92b5718fa722 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -868,9 +868,9 @@ static void __devexit gpmc_mem_exit(void)
 
 }
 
-static void __devinit gpmc_mem_init(void)
+static int __devinit gpmc_mem_init(void)
 {
-        int cs;
+        int cs, rc;
         unsigned long boot_rom_space = 0;
 
         /* never allocate the first page, to facilitate bug detection;
@@ -890,13 +890,21 @@ static void __devinit gpmc_mem_init(void)
                 if (!gpmc_cs_mem_enabled(cs))
                         continue;
                 gpmc_cs_get_memconf(cs, &base, &size);
-                if (gpmc_cs_insert_mem(cs, base, size) < 0)
-                        BUG();
+                rc = gpmc_cs_insert_mem(cs, base, size);
+                if (IS_ERR_VALUE(rc)) {
+                        while (--cs >= 0)
+                                if (gpmc_cs_mem_enabled(cs))
+                                        gpmc_cs_delete_mem(cs);
+                        return rc;
+                }
         }
+
+        return 0;
 }
 
 static __devinit int gpmc_probe(struct platform_device *pdev)
 {
+        int rc;
         u32 l;
         struct resource *res;
 
@@ -936,7 +944,13 @@ static __devinit int gpmc_probe(struct platform_device *pdev)
         dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
                  GPMC_REVISION_MINOR(l));
 
-        gpmc_mem_init();
+        rc = gpmc_mem_init();
+        if (IS_ERR_VALUE(rc)) {
+                clk_disable_unprepare(gpmc_l3_clk);
+                clk_put(gpmc_l3_clk);
+                dev_err(gpmc_dev, "failed to reserve memory\n");
+                return rc;
+        }
 
         if (IS_ERR_VALUE(gpmc_setup_irq()))
                 dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 17f80e4ab162..c47140bbbec4 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -614,16 +614,16 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
                 "sys_off_mode", NULL, NULL, NULL,
                 "gpio_9", NULL, NULL, "safe_mode"),
         _OMAP3_MUXENTRY(UART1_CTS, 150,
-                "uart1_cts", NULL, NULL, NULL,
+                "uart1_cts", "ssi1_rdy_tx", NULL, NULL,
                 "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
         _OMAP3_MUXENTRY(UART1_RTS, 149,
-                "uart1_rts", NULL, NULL, NULL,
+                "uart1_rts", "ssi1_flag_tx", NULL, NULL,
                 "gpio_149", NULL, NULL, "safe_mode"),
         _OMAP3_MUXENTRY(UART1_RX, 151,
-                "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk",
+                "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
                 "gpio_151", NULL, NULL, "safe_mode"),
         _OMAP3_MUXENTRY(UART1_TX, 148,
-                "uart1_tx", NULL, NULL, NULL,
+                "uart1_tx", "ssi1_dat_tx", NULL, NULL,
                 "gpio_148", NULL, NULL, "safe_mode"),
         _OMAP3_MUXENTRY(UART2_CTS, 144,
                 "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 686137d164da..67d66131cfa7 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -91,6 +91,7 @@ extern void omap3_save_scratchpad_contents(void);
 
 #define PM_RTA_ERRATUM_i608             (1 << 0)
 #define PM_SDRC_WAKEUP_ERRATUM_i583     (1 << 1)
+#define PM_PER_MEMORIES_ERRATUM_i582    (1 << 2)
 
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
 extern u16 pm34xx_errata;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index ba670db1fd37..3a904de4313e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -652,14 +652,17 @@ static void __init pm_errata_configure(void)
                 /* Enable the l2 cache toggling in sleep logic */
                 enable_omap3630_toggle_l2_on_restore();
                 if (omap_rev() < OMAP3630_REV_ES1_2)
-                        pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
+                        pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 |
+                                          PM_PER_MEMORIES_ERRATUM_i582);
+        } else if (cpu_is_omap34xx()) {
+                pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582;
         }
 }
 
 int __init omap3_pm_init(void)
 {
         struct power_state *pwrst, *tmp;
-        struct clockdomain *neon_clkdm, *mpu_clkdm;
+        struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm;
         int ret;
 
         if (!omap3_has_io_chain_ctrl())
@@ -711,6 +714,8 @@ int __init omap3_pm_init(void)
 
         neon_clkdm = clkdm_lookup("neon_clkdm");
         mpu_clkdm = clkdm_lookup("mpu_clkdm");
+        per_clkdm = clkdm_lookup("per_clkdm");
+        wkup_clkdm = clkdm_lookup("wkup_clkdm");
 
 #ifdef CONFIG_SUSPEND
         omap_pm_suspend = omap3_pm_suspend;
@@ -727,6 +732,27 @@ int __init omap3_pm_init(void)
         if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
                 omap3630_ctrl_disable_rta();
 
+        /*
+         * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are
+         * not correctly reset when the PER powerdomain comes back
+         * from OFF or OSWR when the CORE powerdomain is kept active.
+         * See OMAP36xx Erratum i582 "PER Domain reset issue after
+         * Domain-OFF/OSWR Wakeup".  This wakeup dependency is not a
+         * complete workaround.  The kernel must also prevent the PER
+         * powerdomain from going to OSWR/OFF while the CORE
+         * powerdomain is not going to OSWR/OFF.  And if PER last
+         * power state was off while CORE last power state was ON, the
+         * UART3/4 and McBSP2/3 SIDETONE devices need to run a
+         * self-test using their loopback tests; if that fails, those
+         * devices are unusable until the PER/CORE can complete a transition
+         * from ON to OSWR/OFF and then back to ON.
+         *
+         * XXX Technically this workaround is only needed if off-mode
+         * or OSWR is enabled.
+         */
+        if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582))
+                clkdm_add_wkdep(per_clkdm, wkup_clkdm);
+
         clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
         if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
                 omap3_secure_ram_storage =
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0405c8190803..a507cd6cf4f1 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -329,6 +329,11 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
 
         oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
 
+        if (console_uart_id == bdata->id) {
+                omap_device_enable(pdev);
+                pm_runtime_set_active(&pdev->dev);
+        }
+
         oh->dev_attr = uart;
 
         if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 44f9aa7ec0c0..69e46631a7cd 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -467,7 +467,7 @@ OMAP_SYS_TIMER(3_am33xx)
 #ifdef CONFIG_ARCH_OMAP4
 #ifdef CONFIG_LOCAL_TIMERS
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-                              OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START);
+                              OMAP44XX_LOCAL_TWD_BASE, 29);
 #endif
 
 static void __init omap4_timer_init(void)
diff --git a/arch/arm/mach-prima2/include/mach/gpio.h b/arch/arm/mach-prima2/include/mach/gpio.h
deleted file mode 100644
index 1904bb03876e..000000000000
--- a/arch/arm/mach-prima2/include/mach/gpio.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-/* Pull up/down values */
-enum sirfsoc_gpio_pull {
-        SIRFSOC_GPIO_PULL_NONE,
-        SIRFSOC_GPIO_PULL_UP,
-        SIRFSOC_GPIO_PULL_DOWN,
-};
-
-void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode);
-
-#endif
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
index 749220f91a70..4407b1730539 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c
@@ -163,7 +163,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = {
         CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
 };
 
-static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
+static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
 {
         struct clk *clock_upll;
         struct clk *clock_h;
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index ed5a95ece9eb..77ee0b732237 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -61,6 +61,7 @@
 #include <plat/nand-core.h>
 #include <plat/adc-core.h>
 #include <plat/rtc-core.h>
+#include <plat/spi-core.h>
 
 static struct map_desc s3c2416_iodesc[] __initdata = {
         IODESC_ENT(WATCHDOG),
@@ -132,6 +133,7 @@ void __init s3c2416_map_io(void)
         /* initialize device information early */
         s3c2416_default_sdhci0();
         s3c2416_default_sdhci1();
+        s3c64xx_spi_setname("s3c2443-spi");
 
         iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
 }
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
index ab648ad8fa50..165b6a6b3daa 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -43,6 +43,7 @@
 #include <plat/nand-core.h>
 #include <plat/adc-core.h>
 #include <plat/rtc-core.h>
+#include <plat/spi-core.h>
 
 static struct map_desc s3c2443_iodesc[] __initdata = {
         IODESC_ENT(WATCHDOG),
@@ -100,6 +101,9 @@ void __init s3c2443_map_io(void)
         s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
         s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
 
+        /* initialize device information early */
+        s3c64xx_spi_setname("s3c2443-spi");
+
         iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
 }
 
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 6e6a0a9d6778..111e404a81fd 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -44,6 +44,7 @@
 #include <plat/sdhci.h>
 #include <plat/adc-core.h>
 #include <plat/fb-core.h>
+#include <plat/spi-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-irqtype.h>
 #include <plat/regs-serial.h>
@@ -179,6 +180,7 @@ void __init s5p6440_map_io(void)
         /* initialize any device information early */
         s3c_adc_setname("s3c64xx-adc");
         s3c_fb_setname("s5p64x0-fb");
+        s3c64xx_spi_setname("s5p64x0-spi");
 
         s5p64x0_default_sdhci0();
         s5p64x0_default_sdhci1();
@@ -193,6 +195,7 @@ void __init s5p6450_map_io(void)
         /* initialize any device information early */
         s3c_adc_setname("s3c64xx-adc");
         s3c_fb_setname("s5p64x0-fb");
+        s3c64xx_spi_setname("s5p64x0-spi");
 
         s5p64x0_default_sdhci0();
         s5p64x0_default_sdhci1();
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index 621908658861..cc6e561c9958 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -45,6 +45,7 @@
 #include <plat/fb-core.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
+#include <plat/spi-core.h>
 #include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
 
@@ -165,6 +166,8 @@ void __init s5pc100_map_io(void)
         s3c_onenand_setname("s5pc100-onenand");
         s3c_fb_setname("s5pc100-fb");
         s3c_cfcon_setname("s5pc100-pata");
+
+        s3c64xx_spi_setname("s5pc100-spi");
 }
 
 void __init s5pc100_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 4c9e9027df9a..a0c50efe8145 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -43,6 +43,7 @@
 #include <plat/iic-core.h>
 #include <plat/keypad-core.h>
 #include <plat/tv-core.h>
+#include <plat/spi-core.h>
 #include <plat/regs-serial.h>
 
 #include "common.h"
@@ -196,6 +197,8 @@ void __init s5pv210_map_io(void)
 
         /* setup TV devices */
         s5p_hdmi_setname("s5pv210-hdmi");
+
+        s3c64xx_spi_setname("s5pv210-spi");
 }
 
 void __init s5pv210_init_clocks(int xtal)
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 2912eab3b967..3cc8b1c21da9 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1196,7 +1196,7 @@ static void __init eva_init(void)
 
 #ifdef CONFIG_CACHE_L2X0
         /* Early BRESP enable, Shared attribute override enable, 32K*8way */
-        l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff);
+        l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
 #endif
 
         i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 3cafb6ab5e9a..37b2a3133b3b 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -24,17 +24,17 @@
 #include <linux/clkdev.h>
 #include <mach/common.h>
 
-#define FRQMR   0xffc80014
-#define MSTPCR0 0xffc80030
-#define MSTPCR1 0xffc80034
-#define MSTPCR3 0xffc8003c
-#define MSTPSR1 0xffc80044
-#define MSTPSR4 0xffc80048
-#define MSTPSR6 0xffc8004c
-#define MSTPCR4 0xffc80050
-#define MSTPCR5 0xffc80054
-#define MSTPCR6 0xffc80058
-#define MSTPCR7 0xffc80040
+#define FRQMR           IOMEM(0xffc80014)
+#define MSTPCR0         IOMEM(0xffc80030)
+#define MSTPCR1         IOMEM(0xffc80034)
+#define MSTPCR3         IOMEM(0xffc8003c)
+#define MSTPSR1         IOMEM(0xffc80044)
+#define MSTPSR4         IOMEM(0xffc80048)
+#define MSTPSR6         IOMEM(0xffc8004c)
+#define MSTPCR4         IOMEM(0xffc80050)
+#define MSTPCR5         IOMEM(0xffc80054)
+#define MSTPCR6         IOMEM(0xffc80058)
+#define MSTPCR7         IOMEM(0xffc80040)
 
 /* ioremap() through clock mapping mandatory to avoid
  * collision with ARM coherent DMA virtual memory range.
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 2917668f0091..ebbffc25f24f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -247,7 +247,7 @@ void __init r8a7779_add_standard_devices(void)
 {
 #ifdef CONFIG_CACHE_L2X0
         /* Early BRESP enable, Shared attribute override enable, 64K*16way */
-        l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff);
+        l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff);
 #endif
         r8a7779_pm_init();
 
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
+++ /dev/null
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
+++ /dev/null
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index 57e235f4ac74..aa5325cd1c42 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -182,7 +182,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
         .init_early     = tegra20_init_early,
         .init_irq       = tegra_dt_init_irq,
         .handle_irq     = gic_handle_irq,
-        .timer          = &tegra_timer,
+        .timer          = &tegra_sys_timer,
         .init_machine   = tegra_dt_init,
         .init_late      = tegra_dt_init_late,
         .restart        = tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index e4a676d4ddf7..5e92a81f9a2e 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -89,7 +89,7 @@ DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
         .init_early     = tegra30_init_early,
         .init_irq       = tegra_dt_init_irq,
         .handle_irq     = gic_handle_irq,
-        .timer          = &tegra_timer,
+        .timer          = &tegra_sys_timer,
         .init_machine   = tegra30_dt_init,
         .init_late      = tegra_init_late,
         .restart        = tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index f88e5143c767..91fbe733a21e 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -55,5 +55,5 @@ static inline int harmony_pcie_init(void) { return 0; }
 
 void __init tegra_paz00_wifikill_init(void);
 
-extern struct sys_timer tegra_timer;
+extern struct sys_timer tegra_sys_timer;
 #endif
diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c
index cc9b5fd8c3d3..8d398a33adf7 100644
--- a/arch/arm/mach-tegra/tegra20_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra20_clocks_data.c
@@ -953,6 +953,7 @@ PERIPH_CLK(pcie_xclk,	NULL,		  "pcie_xclk",  74,     0,	26000000,  mux_clk_m,
 static struct clk *tegra_list_clks[] = {
         &tegra_apbdma,
         &tegra_rtc,
+        &tegra_timer,
         &tegra_i2s1,
         &tegra_i2s2,
         &tegra_spdif_out,
diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c
index 5cd502c27163..e9de5dfd94ec 100644
--- a/arch/arm/mach-tegra/tegra30_clocks.c
+++ b/arch/arm/mach-tegra/tegra30_clocks.c
@@ -1199,7 +1199,7 @@ static long tegra30_pll_round_rate(struct clk_hw *hw, unsigned long rate,
 {
         struct clk_tegra *c = to_clk_tegra(hw);
         unsigned long input_rate = *prate;
-        unsigned long output_rate = *prate;
+        u64 output_rate = *prate;
         const struct clk_pll_freq_table *sel;
         struct clk_pll_freq_table cfg;
         int mul;
diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c
index d92cb556ae35..3d2e5532a9ea 100644
--- a/arch/arm/mach-tegra/tegra30_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra30_clocks_data.c
@@ -1143,6 +1143,7 @@ struct clk *tegra_list_clks[] = {
         &tegra_apbdma,
         &tegra_rtc,
         &tegra_kbc,
+        &tegra_timer,
         &tegra_kfuse,
         &tegra_fuse,
         &tegra_fuse_burn,
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index eccdce983043..d3b8c8e7368f 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -245,7 +245,7 @@ static void __init tegra_init_timer(void)
         register_persistent_clock(NULL, tegra_read_persistent_clock);
 }
 
-struct sys_timer tegra_timer = {
+struct sys_timer tegra_sys_timer = {
         .init = tegra_init_timer,
 };
 
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 2236cbd03cd7..1f3fbc2bb776 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -16,6 +16,7 @@
 #include <linux/stat.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/irq.h>
 #include <linux/platform_data/clk-ux500.h>
 
 #include <asm/hardware/gic.h>
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index b9f60ebe3bc4..023f443784ec 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -856,8 +856,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
                 if (thumb2_32b) {
                         offset.un = 0;
                         handler = do_alignment_t32_to_handler(&instr, regs, &offset);
-                } else
+                } else {
+                        offset.un = 0;
                         handler = do_alignment_ldmstm;
+                }
                 break;
 
         default:
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 477a2d23ddf1..58bc3e4d3bd0 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -610,7 +610,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
                          gfp_t gfp, pgprot_t prot, bool is_coherent, const void *caller)
 {
         u64 mask = get_coherent_dma_mask(dev);
-        struct page *page;
+        struct page *page = NULL;
         void *addr;
 
 #ifdef CONFIG_DMA_API_DEBUG
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
index bf312c354a21..0f5a5f2a2c7b 100644
--- a/arch/arm/mm/vmregion.h
+++ b/arch/arm/mm/vmregion.h
@@ -17,7 +17,6 @@ struct arm_vmregion {
         struct list_head        vm_list;
         unsigned long           vm_start;
         unsigned long           vm_end;
-        void                    *priv;
         int                     vm_active;
         const void              *caller;
 };
diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
index 540d3a7d92df..e7b920b58675 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
@@ -55,7 +55,7 @@ struct platform_device *__init imx_add_mxc_mmc(
         struct resource res[] = {
                 {
                         .start = data->iobase,
-                        .end = data->iobase + SZ_4K - 1,
+                        .end = data->iobase + data->iosize - 1,
                         .flags = IORESOURCE_MEM,
                 }, {
                         .start = data->irq,
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 7cd56ed5cd94..82fcb206b5b2 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -26,6 +26,7 @@ config ARCH_OMAP2PLUS
         select CLKDEV_LOOKUP
         select GENERIC_IRQ_CHIP
         select OMAP_DM_TIMER
+        select PINCTRL
         select PROC_DEVICETREE if PROC_FS
         select SPARSE_IRQ
         select USE_OF
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index c7a4c0902b38..5a4678edd65a 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -16,6 +16,7 @@
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
+#include "../mach-omap2/debug-devices.h"
 
 /* Many OMAP development platforms reuse the same "debug board"; these
  * platforms include H2, H3, H4, and Perseus2.
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index f4a4cd014795..1957a8516e93 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -40,10 +40,10 @@
 #define OMAP_UART_WER_MOD_WKUP  0X7F
 
 /* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX         0x8
+#define OMAP_UART_SW_TX         0x04
 
 /* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX         0x2
+#define OMAP_UART_SW_RX         0x04
 
 #define OMAP_UART_SYSC_RESET    0X07
 #define OMAP_UART_TCR_TRIG      0X0F
diff --git a/arch/arm/plat-samsung/include/plat/spi-core.h b/arch/arm/plat-samsung/include/plat/spi-core.h
new file mode 100644
index 000000000000..0b9428ab3fc3
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/spi-core.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_S3C_SPI_CORE_H
+#define __PLAT_S3C_SPI_CORE_H
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c64xx_spi_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+        s3c64xx_device_spi0.name = name;
+#endif
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+        s3c64xx_device_spi1.name = name;
+#endif
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+        s3c64xx_device_spi2.name = name;
+#endif
+}
+
+#endif /* __PLAT_S3C_SPI_CORE_H */
diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile
index 635cb1865e4d..cd60a81163e9 100644
--- a/arch/arm/tools/Makefile
+++ b/arch/arm/tools/Makefile
@@ -5,6 +5,6 @@
 #
 
 include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
-        @echo '  Generating $@'
+        $(kecho) '  Generating $@'
         @mkdir -p $(dir $@)
         $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/arm/xen/grant-table.c b/arch/arm/xen/grant-table.c
index dbd1330c0196..859a9bb002d5 100644
--- a/arch/arm/xen/grant-table.c
+++ b/arch/arm/xen/grant-table.c
@@ -33,7 +33,7 @@
 #include <xen/page.h>
 #include <xen/grant_table.h>
 
-int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes,
+int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes,
                            unsigned long max_nr_gframes,
                            void **__shared)
 {
diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S
index 074f5ed101b9..71f723984cbd 100644
--- a/arch/arm/xen/hypercall.S
+++ b/arch/arm/xen/hypercall.S
@@ -48,20 +48,16 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/opcodes-virt.h>
 #include <xen/interface/xen.h>
 
 
-/* HVC 0xEA1 */
-#ifdef CONFIG_THUMB2_KERNEL
-#define xen_hvc .word 0xf7e08ea1
-#else
-#define xen_hvc .word 0xe140ea71
-#endif
+#define XEN_IMM 0xEA1
 
 #define HYPERCALL_SIMPLE(hypercall)             \
 ENTRY(HYPERVISOR_##hypercall)                   \
         mov r12, #__HYPERVISOR_##hypercall;     \
-        xen_hvc;                                                        \
+        __HVC(XEN_IMM);                                         \
         mov pc, lr;                                                     \
 ENDPROC(HYPERVISOR_##hypercall)
 
@@ -76,7 +72,7 @@ ENTRY(HYPERVISOR_##hypercall)			\
         stmdb sp!, {r4}                                         \
         ldr r4, [sp, #4]                                        \
         mov r12, #__HYPERVISOR_##hypercall;     \
-        xen_hvc                                                         \
+        __HVC(XEN_IMM);                                         \
         ldm sp!, {r4}                                           \
         mov pc, lr                                                      \
 ENDPROC(HYPERVISOR_##hypercall)
@@ -100,7 +96,7 @@ ENTRY(privcmd_call)
         mov r2, r3
         ldr r3, [sp, #8]
         ldr r4, [sp, #4]
-        xen_hvc
+        __HVC(XEN_IMM)
         ldm sp!, {r4}
         mov pc, lr
 ENDPROC(privcmd_call);