ARM: pm: convert sa11x0 to generic suspend/resume support

Convert sa11x0 to use the generic CPU suspend/resume support, rather
than implementing its own version.  Tested on Assabet.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2 files changed, 7 insertions, 77 deletions

diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index ab9fc4470d36..c4661aab22fb 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -32,8 +32,7 @@
 #include <asm/system.h>
 #include <asm/mach/time.h>
 
-extern void sa1100_cpu_suspend(void);
-extern void sa1100_cpu_resume(void);
+extern void sa1100_cpu_suspend(long);
 
 #define SAVE(x)         sleep_save[SLEEP_SAVE_##x] = x
 #define RESTORE(x)      x = sleep_save[SLEEP_SAVE_##x]
@@ -73,10 +72,10 @@ static int sa11x0_pm_enter(suspend_state_t state)
         RCSR = RCSR_HWR | RCSR_SWR | RCSR_WDR | RCSR_SMR;
 
         /* set resume return address */
-        PSPR = virt_to_phys(sa1100_cpu_resume);
+        PSPR = virt_to_phys(cpu_resume);
 
         /* go zzz */
-        sa1100_cpu_suspend();
+        sa1100_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
 
         cpu_init();
 
@@ -115,11 +114,6 @@ static int sa11x0_pm_enter(suspend_state_t state)
         return 0;
 }
 
-unsigned long sleep_phys_sp(void *sp)
-{
-        return virt_to_phys(sp);
-}
-
 static const struct platform_suspend_ops sa11x0_pm_ops = {
         .enter          = sa11x0_pm_enter,
         .valid          = suspend_valid_only_mem,
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 80f31bad707c..04f2a618d4ef 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -20,12 +20,7 @@
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 
-
-
                 .text
-
-
-
 /*
  * sa1100_cpu_suspend()
  *
@@ -34,27 +29,10 @@
  */
 
 ENTRY(sa1100_cpu_suspend)
-
         stmfd   sp!, {r4 - r12, lr}             @ save registers on stack
-
-        @ get coprocessor registers
-        mrc     p15, 0, r4, c3, c0, 0           @ domain ID
-        mrc     p15, 0, r5, c2, c0, 0           @ translation table base addr
-        mrc     p15, 0, r6, c13, c0, 0          @ PID
-        mrc     p15, 0, r7, c1, c0, 0           @ control reg
-
-        @ store them plus current virtual stack ptr on stack
-        mov     r8, sp
-        stmfd   sp!, {r4 - r8}
-
-        @ preserve phys address of stack
-        mov     r0, sp
-        bl      sleep_phys_sp
-        ldr     r1, =sleep_save_sp
-        str     r0, [r1]
-
-        @ clean data cache and invalidate WB
-        bl      v4wb_flush_kern_cache_all
+        mov     r1, r0
+        ldr     r3, =sa1100_cpu_resume          @ return function
+        bl      cpu_suspend
 
         @ disable clock switching
         mcr     p15, 0, r1, c15, c2, 2
@@ -166,50 +144,8 @@ sa1110_sdram_controller_fix:
  * cpu_sa1100_resume()
  *
  * entry point from bootloader into kernel during resume
- *
- * Note: Yes, part of the following code is located into the .data section.
- *       This is to allow sleep_save_sp to be accessed with a relative load
- *       while we can't rely on any MMU translation.  We could have put
- *       sleep_save_sp in the .text section as well, but some setups might
- *       insist on it to be truly read-only.
  */
-
-        .data
-        .align 5
-ENTRY(sa1100_cpu_resume)
-        mov     r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-        msr     cpsr_c, r0                      @ set SVC, irqs off
-
-        ldr     r0, sleep_save_sp               @ stack phys addr
-        ldr     r2, =resume_after_mmu           @ its absolute virtual address
-        ldmfd   r0, {r4 - r7, sp}               @ CP regs + virt stack ptr
-
-        mov     r1, #0
-        mcr     p15, 0, r1, c8, c7, 0           @ flush I+D TLBs
-        mcr     p15, 0, r1, c7, c7, 0           @ flush I&D cache
-        mcr     p15, 0, r1, c9, c0, 0           @ invalidate RB
-        mcr     p15, 0, r1, c9, c0, 5           @ allow user space to use RB
-
-        mcr     p15, 0, r4, c3, c0, 0           @ domain ID
-        mcr     p15, 0, r5, c2, c0, 0           @ translation table base addr
-        mcr     p15, 0, r6, c13, c0, 0          @ PID
-        b       resume_turn_on_mmu              @ cache align execution
-
         .align 5
-resume_turn_on_mmu:
-        mcr     p15, 0, r7, c1, c0, 0           @ turn on MMU, caches, etc.
-        nop
-        mov     pc, r2                          @ jump to virtual addr
-        nop
-        nop
-        nop
-
-sleep_save_sp:
-        .word   0                               @ preserve stack phys ptr here
-
-        .text
-resume_after_mmu:
+sa1100_cpu_resume:
         mcr     p15, 0, r1, c15, c1, 2          @ enable clock switching
         ldmfd   sp!, {r4 - r12, pc}             @ return to caller
-
-