at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board

This adds the support of atmel-mci sd/mmc driver in at91sam9g45 devices and
board files. This also configures the DMA controller slave interface for
at_hdmac dmaengine driver.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

2 files changed, 189 insertions, 0 deletions

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 1276babf84d5..1e8f275c17f6 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -15,6 +15,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
+#include <linux/atmel-mci.h>
 
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
@@ -25,6 +26,7 @@
 #include <mach/at91sam9g45_matrix.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at_hdmac.h>
+#include <mach/atmel-mci.h>
 
 #include "generic.h"
 
@@ -350,6 +352,169 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {}
 
 
 /* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct mci_platform_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+        [0] = {
+                .start  = AT91SAM9G45_BASE_MCI0,
+                .end    = AT91SAM9G45_BASE_MCI0 + SZ_16K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9G45_ID_MCI0,
+                .end    = AT91SAM9G45_ID_MCI0,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device at91sam9g45_mmc0_device = {
+        .name           = "atmel_mci",
+        .id             = 0,
+        .dev            = {
+                                .dma_mask               = &mmc_dmamask,
+                                .coherent_dma_mask      = DMA_BIT_MASK(32),
+                                .platform_data          = &mmc0_data,
+        },
+        .resource       = mmc0_resources,
+        .num_resources  = ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+        [0] = {
+                .start  = AT91SAM9G45_BASE_MCI1,
+                .end    = AT91SAM9G45_BASE_MCI1 + SZ_16K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9G45_ID_MCI1,
+                .end    = AT91SAM9G45_ID_MCI1,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device at91sam9g45_mmc1_device = {
+        .name           = "atmel_mci",
+        .id             = 1,
+        .dev            = {
+                                .dma_mask               = &mmc_dmamask,
+                                .coherent_dma_mask      = DMA_BIT_MASK(32),
+                                .platform_data          = &mmc1_data,
+        },
+        .resource       = mmc1_resources,
+        .num_resources  = ARRAY_SIZE(mmc1_resources),
+};
+
+/* Consider only one slot : slot 0 */
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
+{
+
+        if (!data)
+                return;
+
+        /* Must have at least one usable slot */
+        if (!data->slot[0].bus_width)
+                return;
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+        {
+        struct at_dma_slave     *atslave;
+        struct mci_dma_data     *alt_atslave;
+
+        alt_atslave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
+        atslave = &alt_atslave->sdata;
+
+        /* DMA slave channel configuration */
+        atslave->dma_dev = &at_hdmac_device.dev;
+        atslave->reg_width = AT_DMA_SLAVE_WIDTH_32BIT;
+        atslave->cfg = ATC_FIFOCFG_HALFFIFO
+                        | ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
+        atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16;
+        if (mmc_id == 0)        /* MCI0 */
+                atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
+                              | ATC_DST_PER(AT_DMA_ID_MCI0);
+
+        else                    /* MCI1 */
+                atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI1)
+                              | ATC_DST_PER(AT_DMA_ID_MCI1);
+
+        data->dma_slave = alt_atslave;
+        }
+#endif
+
+
+        /* input/irq */
+        if (data->slot[0].detect_pin) {
+                at91_set_gpio_input(data->slot[0].detect_pin, 1);
+                at91_set_deglitch(data->slot[0].detect_pin, 1);
+        }
+        if (data->slot[0].wp_pin)
+                at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+        if (mmc_id == 0) {              /* MCI0 */
+
+                /* CLK */
+                at91_set_A_periph(AT91_PIN_PA0, 0);
+
+                /* CMD */
+                at91_set_A_periph(AT91_PIN_PA1, 1);
+
+                /* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
+                at91_set_A_periph(AT91_PIN_PA2, 1);
+                if (data->slot[0].bus_width == 4) {
+                        at91_set_A_periph(AT91_PIN_PA3, 1);
+                        at91_set_A_periph(AT91_PIN_PA4, 1);
+                        at91_set_A_periph(AT91_PIN_PA5, 1);
+                        if (data->slot[0].bus_width == 8) {
+                                at91_set_A_periph(AT91_PIN_PA6, 1);
+                                at91_set_A_periph(AT91_PIN_PA7, 1);
+                                at91_set_A_periph(AT91_PIN_PA8, 1);
+                                at91_set_A_periph(AT91_PIN_PA9, 1);
+                        }
+                }
+
+                mmc0_data = *data;
+                at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk");
+                platform_device_register(&at91sam9g45_mmc0_device);
+
+        } else {                        /* MCI1 */
+
+                /* CLK */
+                at91_set_A_periph(AT91_PIN_PA31, 0);
+
+                /* CMD */
+                at91_set_A_periph(AT91_PIN_PA22, 1);
+
+                /* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
+                at91_set_A_periph(AT91_PIN_PA23, 1);
+                if (data->slot[0].bus_width == 4) {
+                        at91_set_A_periph(AT91_PIN_PA24, 1);
+                        at91_set_A_periph(AT91_PIN_PA25, 1);
+                        at91_set_A_periph(AT91_PIN_PA26, 1);
+                        if (data->slot[0].bus_width == 8) {
+                                at91_set_A_periph(AT91_PIN_PA27, 1);
+                                at91_set_A_periph(AT91_PIN_PA28, 1);
+                                at91_set_A_periph(AT91_PIN_PA29, 1);
+                                at91_set_A_periph(AT91_PIN_PA30, 1);
+                        }
+                }
+
+                mmc1_data = *data;
+                at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk");
+                platform_device_register(&at91sam9g45_mmc1_device);
+
+        }
+}
+#else
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 7913984f6de9..86ff4b52db32 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -24,7 +24,9 @@
 #include <linux/input.h>
 #include <linux/leds.h>
 #include <linux/clk.h>
+#include <linux/atmel-mci.h>
 
+#include <mach/hardware.h>
 #include <video/atmel_lcdc.h>
 
 #include <asm/setup.h>
@@ -98,6 +100,25 @@ static struct spi_board_info ek_spi_devices[] = {
 
 
 /*
+ * MCI (SD/MMC)
+ */
+static struct mci_platform_data __initdata mci0_data = {
+        .slot[0] = {
+                .bus_width      = 4,
+                .detect_pin     = AT91_PIN_PD10,
+        },
+};
+
+static struct mci_platform_data __initdata mci1_data = {
+        .slot[0] = {
+                .bus_width      = 4,
+                .detect_pin     = AT91_PIN_PD11,
+                .wp_pin         = AT91_PIN_PD29,
+        },
+};
+
+
+/*
  * MACB Ethernet device
  */
 static struct at91_eth_data __initdata ek_macb_data = {
@@ -380,6 +401,9 @@ static void __init ek_board_init(void)
         at91_add_device_usba(&ek_usba_udc_data);
         /* SPI */
         at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+        /* MMC */
+        at91_add_device_mci(0, &mci0_data);
+        at91_add_device_mci(1, &mci1_data);
         /* Ethernet */
         at91_add_device_eth(&ek_macb_data);
         /* NAND */