Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6

339 files changed, 41928 insertions, 5990 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b786e68914d4..d048f6887d0b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,8 +12,11 @@ config ARM
         select RTC_LIB
         select SYS_SUPPORTS_APM_EMULATION
         select HAVE_OPROFILE
+        select HAVE_ARCH_KGDB
         select HAVE_KPROBES if (!XIP_KERNEL)
         select HAVE_KRETPROBES if (HAVE_KPROBES)
+        select HAVE_FTRACE if (!XIP_KERNEL)
+        select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE)
         help
           The ARM series is a line of low-power-consumption RISC chip designs
           licensed by ARM Ltd and targeted at embedded applications and
@@ -22,6 +25,9 @@ config ARM
           Europe.  There is an ARM Linux project with a web page at
           <http://www.arm.linux.org.uk/>.
 
+config HAVE_PWM
+        bool
+
 config SYS_SUPPORTS_APM_EMULATION
         bool
 
@@ -84,6 +90,11 @@ config STACKTRACE_SUPPORT
         bool
         default y
 
+config HAVE_LATENCYTOP_SUPPORT
+        bool
+        depends on !SMP
+        default y
+
 config LOCKDEP_SUPPORT
         bool
         default y
@@ -147,6 +158,10 @@ config FIQ
 config ARCH_MTD_XIP
         bool
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+        bool
+        def_bool y
+
 if OPROFILE
 
 config OPROFILE_ARMV6
@@ -232,13 +247,6 @@ config ARCH_CLPS711X
         help
           Support for Cirrus Logic 711x/721x based boards.
 
-config ARCH_CO285
-        bool "Co-EBSA285"
-        select FOOTBRIDGE
-        select FOOTBRIDGE_ADDIN
-        help
-          Support for Intel's EBSA285 companion chip.
-
 config ARCH_EBSA110
         bool "EBSA-110"
         select ISA
@@ -299,6 +307,8 @@ config ARCH_IOP32X
         depends on MMU
         select PLAT_IOP
         select PCI
+        select GENERIC_GPIO
+        select HAVE_GPIO_LIB
         help
           Support for Intel's 80219 and IOP32X (XScale) family of
           processors.
@@ -308,6 +318,8 @@ config ARCH_IOP33X
         depends on MMU
         select PLAT_IOP
         select PCI
+        select GENERIC_GPIO
+        select HAVE_GPIO_LIB
         help
           Support for Intel's IOP33X (XScale) family of processors.
 
@@ -347,6 +359,16 @@ config ARCH_L7200
           If you have any questions or comments about the Linux kernel port
           to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_KIRKWOOD
+        bool "Marvell Kirkwood"
+        select PCI
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+        select PLAT_ORION
+        help
+          Support for the following Marvell Kirkwood series SoCs:
+          88F6180, 88F6192 and 88F6281.
+
 config ARCH_KS8695
         bool "Micrel/Kendin KS8695"
         select GENERIC_GPIO
@@ -365,9 +387,31 @@ config ARCH_NS9XXX
 
           <http://www.digi.com/products/microprocessors/index.jsp>
 
+config ARCH_LOKI
+        bool "Marvell Loki (88RC8480)"
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+        select PLAT_ORION
+        help
+          Support for the Marvell Loki (88RC8480) SoC.
+
+config ARCH_MV78XX0
+        bool "Marvell MV78xx0"
+        select PCI
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+        select PLAT_ORION
+        help
+          Support for the following Marvell MV78xx0 series SoCs:
+          MV781x0, MV782x0.
+
 config ARCH_MXC
         bool "Freescale MXC/iMX-based"
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
         select ARCH_MTD_XIP
+        select GENERIC_GPIO
+        select HAVE_GPIO_LIB
         help
           Support for Freescale MXC/iMX-based family of processors
 
@@ -381,7 +425,8 @@ config ARCH_ORION5X
         select PLAT_ORION
         help
           Support for the following Marvell Orion 5x series SoCs:
-          Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
+          Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+          Orion-2 (5281).
 
 config ARCH_PNX4008
         bool "Philips Nexperia PNX4008 Mobile"
@@ -406,6 +451,7 @@ config ARCH_RPC
         select FIQ
         select TIMER_ACORN
         select ARCH_MAY_HAVE_PC_FDC
+        select HAVE_PATA_PLATFORM
         select ISA_DMA_API
         select NO_IOPORT
         help
@@ -502,6 +548,10 @@ source "arch/arm/mach-ixp2000/Kconfig"
 
 source "arch/arm/mach-ixp23xx/Kconfig"
 
+source "arch/arm/mach-loki/Kconfig"
+
+source "arch/arm/mach-mv78xx0/Kconfig"
+
 source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
@@ -514,6 +564,8 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
+source "arch/arm/mach-kirkwood/Kconfig"
+
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
 
@@ -650,6 +702,7 @@ source "kernel/time/Kconfig"
 config SMP
         bool "Symmetric Multi-Processing (EXPERIMENTAL)"
         depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+        select USE_GENERIC_SMP_HELPERS
         help
           This enables support for systems with more than one CPU. If you have
           a system with only one CPU, like most personal computers, say N. If
@@ -703,27 +756,6 @@ config PREEMPT
           Say Y here if you are building a kernel for a desktop, embedded
           or real-time system.  Say N if you are unsure.
 
-config NO_IDLE_HZ
-        bool "Dynamic tick timer"
-        depends on !GENERIC_CLOCKEVENTS
-        help
-          Select this option if you want to disable continuous timer ticks
-          and have them programmed to occur as required. This option saves
-          power as the system can remain in idle state for longer.
-
-          By default dynamic tick is disabled during the boot, and can be
-          manually enabled with:
-
-            echo 1 > /sys/devices/system/timer/timer0/dyn_tick
-
-          Alternatively, if you want dynamic tick automatically enabled
-          during boot, pass "dyntick=enable" via the kernel command string.
-
-          Please note that dynamic tick may affect the accuracy of
-          timekeeping on some platforms depending on the implementation.
-          Currently at least OMAP, PXA2xx and SA11x0 platforms are known
-          to have accurate timekeeping with dynamic tick.
-
 config HZ
         int
         default 128 if ARCH_L7200
@@ -789,7 +821,7 @@ source "mm/Kconfig"
 
 config LEDS
         bool "Timer and CPU usage LEDs"
-        depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \
+        depends on ARCH_CDB89712 || ARCH_EBSA110 || \
                    ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
                    ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
                    ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e72db27e0ba0..b20995a82e04 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -100,8 +100,6 @@ textofs-y	:= 0x00008000
   incdir-$(CONFIG_ARCH_CLPS7500)   := cl7500
  machine-$(CONFIG_FOOTBRIDGE)      := footbridge
   incdir-$(CONFIG_FOOTBRIDGE)      := ebsa285
- machine-$(CONFIG_ARCH_CO285)      := footbridge
-  incdir-$(CONFIG_ARCH_CO285)      := ebsa285
  machine-$(CONFIG_ARCH_SHARK)      := shark
  machine-$(CONFIG_ARCH_SA1100)     := sa1100
 ifeq ($(CONFIG_ARCH_SA1100),y)
@@ -135,11 +133,15 @@ endif
  machine-$(CONFIG_ARCH_NETX)       := netx
  machine-$(CONFIG_ARCH_NS9XXX)     := ns9xxx
  machine-$(CONFIG_ARCH_DAVINCI)    := davinci
+ machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
   incdir-$(CONFIG_ARCH_MXC)        := mxc
+ machine-$(CONFIG_ARCH_MX2)        := mx2
  machine-$(CONFIG_ARCH_MX3)        := mx3
  machine-$(CONFIG_ARCH_ORION5X)    := orion5x
  machine-$(CONFIG_ARCH_MSM7X00A)   := msm
+ machine-$(CONFIG_ARCH_LOKI)       := loki
+ machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
@@ -190,8 +192,6 @@ core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
 core-$(CONFIG_ARCH_MXC)         += arch/arm/plat-mxc/
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
-drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/
-drivers-$(CONFIG_ARCH_L7200)    += drivers/acorn/char/
 
 libs-y                          := arch/arm/lib/ $(libs-y)
 
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index de9d9ee50958..95baac4939e0 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -69,6 +69,12 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
 
 targets       := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
                  head.o misc.o $(OBJS)
+
+ifeq ($(CONFIG_FTRACE),y)
+ORIG_CFLAGS := $(KBUILD_CFLAGS)
+KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
+endif
+
 EXTRA_CFLAGS  := -fpic -fno-builtin
 EXTRA_AFLAGS  :=
 
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 3c2c8f2a1dc4..de41daeab5e9 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -623,8 +623,8 @@ proc_types:
                 b       __armv4_mmu_cache_off
                 b       __armv4_mmu_cache_flush
 
-                .word   0x56055310              @ Feroceon
-                .word   0xfffffff0
+                .word   0x56050000              @ Feroceon
+                .word   0xff0f0000
                 b       __armv4_mmu_cache_on
                 b       __armv4_mmu_cache_off
                 b       __armv5tej_mmu_cache_flush
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 3d0b9fa42f84..325e4b6a6afb 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -2,7 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-obj-y                           += rtctime.o
 obj-$(CONFIG_ARM_GIC)           += gic.o
 obj-$(CONFIG_ARM_VIC)           += vic.o
 obj-$(CONFIG_ICST525)           += icst525.o
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 2744673314b4..dd2947342604 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -554,9 +554,8 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 
         device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
         if (!device_info) {
-                printk(KERN_ERR
-                        "Could not allocated dmabounce_device_info for %s",
-                        dev->bus_id);
+                dev_err(dev,
+                        "Could not allocated dmabounce_device_info\n");
                 return -ENOMEM;
         }
 
@@ -594,8 +593,7 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 
         dev->archdata.dmabounce = device_info;
 
-        printk(KERN_INFO "dmabounce: registered device %s on %s bus\n",
-                dev->bus_id, dev->bus->name);
+        dev_info(dev, "dmabounce: registered device\n");
 
         return 0;
 
@@ -614,16 +612,15 @@ dmabounce_unregister_dev(struct device *dev)
         dev->archdata.dmabounce = NULL;
 
         if (!device_info) {
-                printk(KERN_WARNING
-                        "%s: Never registered with dmabounce but attempting" \
-                        "to unregister!\n", dev->bus_id);
+                dev_warn(dev,
+                         "Never registered with dmabounce but attempting"
+                         "to unregister!\n");
                 return;
         }
 
         if (!list_empty(&device_info->safe_buffers)) {
-                printk(KERN_ERR
-                        "%s: Removing from dmabounce with pending buffers!\n",
-                        dev->bus_id);
+                dev_err(dev,
+                        "Removing from dmabounce with pending buffers!\n");
                 BUG();
         }
 
@@ -639,8 +636,7 @@ dmabounce_unregister_dev(struct device *dev)
 
         kfree(device_info);
 
-        printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n",
-                dev->bus_id, dev->bus->name);
+        dev_info(dev, "dmabounce: device unregistered\n");
 }
 
 
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index d973c986f721..c3c3a3339049 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -543,7 +543,6 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
                 goto out;
         }
 
-        strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id));
         /*
          * If the parent device has a DMA mask associated with it,
          * propagate it down to the children.
@@ -553,6 +552,7 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
                 dev->dev.dma_mask = &dev->dma_mask;
         }
 
+        dev_set_name(&dev->dev, "%s", info->name);
         dev->devid       = info->devid;
         dev->dev.parent  = lchip->dev;
         dev->dev.bus     = &locomo_bus_type;
diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c
deleted file mode 100644
index aa8f7739c822..000000000000
--- a/arch/arm/common/rtctime.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- *  linux/arch/arm/common/rtctime.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions Ltd.
- *  Based on sa1100-rtc.c, Nils Faerber, CIH, Nicolas Pitre.
- *  Based on rtc.c by Paul Gortmaker
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/rtc.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/miscdevice.h>
-#include <linux/spinlock.h>
-#include <linux/capability.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-
-#include <asm/rtc.h>
-
-static DECLARE_WAIT_QUEUE_HEAD(rtc_wait);
-static struct fasync_struct *rtc_async_queue;
-
-/*
- * rtc_lock protects rtc_irq_data
- */
-static DEFINE_SPINLOCK(rtc_lock);
-static unsigned long rtc_irq_data;
-
-/*
- * rtc_sem protects rtc_inuse and rtc_ops
- */
-static DEFINE_MUTEX(rtc_mutex);
-static unsigned long rtc_inuse;
-static struct rtc_ops *rtc_ops;
-
-#define rtc_epoch 1900UL
-
-/*
- * Calculate the next alarm time given the requested alarm time mask
- * and the current time.
- */
-void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm)
-{
-        unsigned long next_time;
-        unsigned long now_time;
-
-        next->tm_year = now->tm_year;
-        next->tm_mon = now->tm_mon;
-        next->tm_mday = now->tm_mday;
-        next->tm_hour = alrm->tm_hour;
-        next->tm_min = alrm->tm_min;
-        next->tm_sec = alrm->tm_sec;
-
-        rtc_tm_to_time(now, &now_time);
-        rtc_tm_to_time(next, &next_time);
-
-        if (next_time < now_time) {
-                /* Advance one day */
-                next_time += 60 * 60 * 24;
-                rtc_time_to_tm(next_time, next);
-        }
-}
-EXPORT_SYMBOL(rtc_next_alarm_time);
-
-static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
-{
-        memset(tm, 0, sizeof(struct rtc_time));
-        return ops->read_time(tm);
-}
-
-static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm)
-{
-        int ret;
-
-        ret = rtc_valid_tm(tm);
-        if (ret == 0)
-                ret = ops->set_time(tm);
-
-        return ret;
-}
-
-static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-{
-        int ret = -EINVAL;
-        if (ops->read_alarm) {
-                memset(alrm, 0, sizeof(struct rtc_wkalrm));
-                ret = ops->read_alarm(alrm);
-        }
-        return ret;
-}
-
-static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-{
-        int ret = -EINVAL;
-        if (ops->set_alarm)
-                ret = ops->set_alarm(alrm);
-        return ret;
-}
-
-void rtc_update(unsigned long num, unsigned long events)
-{
-        spin_lock(&rtc_lock);
-        rtc_irq_data = (rtc_irq_data + (num << 8)) | events;
-        spin_unlock(&rtc_lock);
-
-        wake_up_interruptible(&rtc_wait);
-        kill_fasync(&rtc_async_queue, SIGIO, POLL_IN);
-}
-EXPORT_SYMBOL(rtc_update);
-
-
-static ssize_t
-rtc_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
-{
-        DECLARE_WAITQUEUE(wait, current);
-        unsigned long data;
-        ssize_t ret;
-
-        if (count < sizeof(unsigned long))
-                return -EINVAL;
-
-        add_wait_queue(&rtc_wait, &wait);
-        do {
-                __set_current_state(TASK_INTERRUPTIBLE);
-
-                spin_lock_irq(&rtc_lock);
-                data = rtc_irq_data;
-                rtc_irq_data = 0;
-                spin_unlock_irq(&rtc_lock);
-
-                if (data != 0) {
-                        ret = 0;
-                        break;
-                }
-                if (file->f_flags & O_NONBLOCK) {
-                        ret = -EAGAIN;
-                        break;
-                }
-                if (signal_pending(current)) {
-                        ret = -ERESTARTSYS;
-                        break;
-                }
-                schedule();
-        } while (1);
-        set_current_state(TASK_RUNNING);
-        remove_wait_queue(&rtc_wait, &wait);
-
-        if (ret == 0) {
-                ret = put_user(data, (unsigned long __user *)buf);
-                if (ret == 0)
-                        ret = sizeof(unsigned long);
-        }
-        return ret;
-}
-
-static unsigned int rtc_poll(struct file *file, poll_table *wait)
-{
-        unsigned long data;
-
-        poll_wait(file, &rtc_wait, wait);
-
-        spin_lock_irq(&rtc_lock);
-        data = rtc_irq_data;
-        spin_unlock_irq(&rtc_lock);
-
-        return data != 0 ? POLLIN | POLLRDNORM : 0;
-}
-
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-                     unsigned long arg)
-{
-        struct rtc_ops *ops = file->private_data;
-        struct rtc_time tm;
-        struct rtc_wkalrm alrm;
-        void __user *uarg = (void __user *)arg;
-        int ret = -EINVAL;
-
-        switch (cmd) {
-        case RTC_ALM_READ:
-                ret = rtc_arm_read_alarm(ops, &alrm);
-                if (ret)
-                        break;
-                ret = copy_to_user(uarg, &alrm.time, sizeof(tm));
-                if (ret)
-                        ret = -EFAULT;
-                break;
-
-        case RTC_ALM_SET:
-                ret = copy_from_user(&alrm.time, uarg, sizeof(tm));
-                if (ret) {
-                        ret = -EFAULT;
-                        break;
-                }
-                alrm.enabled = 0;
-                alrm.pending = 0;
-                alrm.time.tm_mday = -1;
-                alrm.time.tm_mon = -1;
-                alrm.time.tm_year = -1;
-                alrm.time.tm_wday = -1;
-                alrm.time.tm_yday = -1;
-                alrm.time.tm_isdst = -1;
-                ret = rtc_arm_set_alarm(ops, &alrm);
-                break;
-
-        case RTC_RD_TIME:
-                ret = rtc_arm_read_time(ops, &tm);
-                if (ret)
-                        break;
-                ret = copy_to_user(uarg, &tm, sizeof(tm));
-                if (ret)
-                        ret = -EFAULT;
-                break;
-
-        case RTC_SET_TIME:
-                if (!capable(CAP_SYS_TIME)) {
-                        ret = -EACCES;
-                        break;
-                }
-                ret = copy_from_user(&tm, uarg, sizeof(tm));
-                if (ret) {
-                        ret = -EFAULT;
-                        break;
-                }
-                ret = rtc_arm_set_time(ops, &tm);
-                break;
-
-        case RTC_EPOCH_SET:
-#ifndef rtc_epoch
-                /*
-                 * There were no RTC clocks before 1900.
-                 */
-                if (arg < 1900) {
-                        ret = -EINVAL;
-                        break;
-                }
-                if (!capable(CAP_SYS_TIME)) {
-                        ret = -EACCES;
-                        break;
-                }
-                rtc_epoch = arg;
-                ret = 0;
-#endif
-                break;
-
-        case RTC_EPOCH_READ:
-                ret = put_user(rtc_epoch, (unsigned long __user *)uarg);
-                break;
-
-        case RTC_WKALM_SET:
-                ret = copy_from_user(&alrm, uarg, sizeof(alrm));
-                if (ret) {
-                        ret = -EFAULT;
-                        break;
-                }
-                ret = rtc_arm_set_alarm(ops, &alrm);
-                break;
-
-        case RTC_WKALM_RD:
-                ret = rtc_arm_read_alarm(ops, &alrm);
-                if (ret)
-                        break;
-                ret = copy_to_user(uarg, &alrm, sizeof(alrm));
-                if (ret)
-                        ret = -EFAULT;
-                break;
-
-        default:
-                if (ops->ioctl)
-                        ret = ops->ioctl(cmd, arg);
-                break;
-        }
-        return ret;
-}
-
-static int rtc_open(struct inode *inode, struct file *file)
-{
-        int ret;
-
-        mutex_lock(&rtc_mutex);
-
-        if (rtc_inuse) {
-                ret = -EBUSY;
-        } else if (!rtc_ops || !try_module_get(rtc_ops->owner)) {
-                ret = -ENODEV;
-        } else {
-                file->private_data = rtc_ops;
-
-                ret = rtc_ops->open ? rtc_ops->open() : 0;
-                if (ret == 0) {
-                        spin_lock_irq(&rtc_lock);
-                        rtc_irq_data = 0;
-                        spin_unlock_irq(&rtc_lock);
-
-                        rtc_inuse = 1;
-                }
-        }
-        mutex_unlock(&rtc_mutex);
-
-        return ret;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
-        struct rtc_ops *ops = file->private_data;
-
-        if (ops->release)
-                ops->release();
-
-        spin_lock_irq(&rtc_lock);
-        rtc_irq_data = 0;
-        spin_unlock_irq(&rtc_lock);
-
-        module_put(rtc_ops->owner);
-        rtc_inuse = 0;
-
-        return 0;
-}
-
-static int rtc_fasync(int fd, struct file *file, int on)
-{
-        return fasync_helper(fd, file, on, &rtc_async_queue);
-}
-
-static const struct file_operations rtc_fops = {
-        .owner          = THIS_MODULE,
-        .llseek         = no_llseek,
-        .read           = rtc_read,
-        .poll           = rtc_poll,
-        .ioctl          = rtc_ioctl,
-        .open           = rtc_open,
-        .release        = rtc_release,
-        .fasync         = rtc_fasync,
-};
-
-static struct miscdevice rtc_miscdev = {
-        .minor          = RTC_MINOR,
-        .name           = "rtc",
-        .fops           = &rtc_fops,
-};
-
-
-static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data)
-{
-        struct rtc_ops *ops = data;
-        struct rtc_wkalrm alrm;
-        struct rtc_time tm;
-        char *p = page;
-
-        if (rtc_arm_read_time(ops, &tm) == 0) {
-                p += sprintf(p,
-                        "rtc_time\t: %02d:%02d:%02d\n"
-                        "rtc_date\t: %04d-%02d-%02d\n"
-                        "rtc_epoch\t: %04lu\n",
-                        tm.tm_hour, tm.tm_min, tm.tm_sec,
-                        tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
-                        rtc_epoch);
-        }
-
-        if (rtc_arm_read_alarm(ops, &alrm) == 0) {
-                p += sprintf(p, "alrm_time\t: ");
-                if ((unsigned int)alrm.time.tm_hour <= 24)
-                        p += sprintf(p, "%02d:", alrm.time.tm_hour);
-                else
-                        p += sprintf(p, "**:");
-                if ((unsigned int)alrm.time.tm_min <= 59)
-                        p += sprintf(p, "%02d:", alrm.time.tm_min);
-                else
-                        p += sprintf(p, "**:");
-                if ((unsigned int)alrm.time.tm_sec <= 59)
-                        p += sprintf(p, "%02d\n", alrm.time.tm_sec);
-                else
-                        p += sprintf(p, "**\n");
-
-                p += sprintf(p, "alrm_date\t: ");
-                if ((unsigned int)alrm.time.tm_year <= 200)
-                        p += sprintf(p, "%04d-", alrm.time.tm_year + 1900);
-                else
-                        p += sprintf(p, "****-");
-                if ((unsigned int)alrm.time.tm_mon <= 11)
-                        p += sprintf(p, "%02d-", alrm.time.tm_mon + 1);
-                else
-                        p += sprintf(p, "**-");
-                if ((unsigned int)alrm.time.tm_mday <= 31)
-                        p += sprintf(p, "%02d\n", alrm.time.tm_mday);
-                else
-                        p += sprintf(p, "**\n");
-                p += sprintf(p, "alrm_wakeup\t: %s\n",
-                             alrm.enabled ? "yes" : "no");
-                p += sprintf(p, "alrm_pending\t: %s\n",
-                             alrm.pending ? "yes" : "no");
-        }
-
-        if (ops->proc)
-                p += ops->proc(p);
-
-        return p - page;
-}
-
-int register_rtc(struct rtc_ops *ops)
-{
-        int ret = -EBUSY;
-
-        mutex_lock(&rtc_mutex);
-        if (rtc_ops == NULL) {
-                rtc_ops = ops;
-
-                ret = misc_register(&rtc_miscdev);
-                if (ret == 0)
-                        create_proc_read_entry("driver/rtc", 0, NULL,
-                                               rtc_read_proc, ops);
-        }
-        mutex_unlock(&rtc_mutex);
-
-        return ret;
-}
-EXPORT_SYMBOL(register_rtc);
-
-void unregister_rtc(struct rtc_ops *rtc)
-{
-        mutex_lock(&rtc_mutex);
-        if (rtc == rtc_ops) {
-                remove_proc_entry("driver/rtc", NULL);
-                misc_deregister(&rtc_miscdev);
-                rtc_ops = NULL;
-        }
-        mutex_unlock(&rtc_mutex);
-}
-EXPORT_SYMBOL(unregister_rtc);
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index eb06d0b2cb74..0a8e1ff2af8a 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -550,9 +550,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
                 goto out;
         }
 
-        snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
-                 "%4.4lx", info->offset);
-
+        dev_set_name(&dev->dev, "%4.4lx", info->offset);
         dev->devid       = info->devid;
         dev->dev.parent  = sachip->dev;
         dev->dev.bus     = &sa1111_bus_type;
@@ -560,7 +558,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
         dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
         dev->res.start   = sachip->phys + info->offset;
         dev->res.end     = dev->res.start + 511;
-        dev->res.name    = dev->dev.bus_id;
+        dev->res.name    = dev_name(&dev->dev);
         dev->res.flags   = IORESOURCE_MEM;
         dev->mapbase     = sachip->base + info->offset;
         dev->skpcr_mask  = info->skpcr_mask;
@@ -570,6 +568,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
         if (ret) {
                 printk("SA1111: failed to allocate resource for %s\n",
                         dev->res.name);
+                dev_set_name(&dev->dev, NULL);
                 kfree(dev);
                 goto out;
         }
@@ -593,7 +592,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
                 if (dev->dma_mask != 0xffffffffUL) {
                         ret = dmabounce_register_dev(&dev->dev, 1024, 4096);
                         if (ret) {
-                                printk("SA1111: Failed to register %s with dmabounce", dev->dev.bus_id);
+                                dev_err(&dev->dev, "SA1111: Failed to register"
+                                        " with dmabounce\n");
                                 device_unregister(&dev->dev);
                         }
                 }
@@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
         if (!sachip)
                 return -ENOMEM;
 
-        sachip->clk = clk_get(me, "GPIO27_CLK");
+        sachip->clk = clk_get(me, "SA1111_CLK");
         if (!sachip->clk) {
                 ret = PTR_ERR(sachip->clk);
                 goto err_free;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index bc299b07a6fa..ae39553589dd 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -247,7 +247,7 @@ static int __devinit scoop_probe(struct platform_device *pdev)
         devptr->gpio.base = -1;
 
         if (inf->gpio_base != 0) {
-                devptr->gpio.label = pdev->dev.bus_id;
+                devptr->gpio.label = dev_name(&pdev->dev);
                 devptr->gpio.base = inf->gpio_base;
                 devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */
                 devptr->gpio.set = scoop_gpio_set;
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 5bba5255b119..8822b684d474 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -31,6 +31,7 @@
 #include <asm/irq.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 
@@ -157,6 +158,7 @@ static void sharpsl_battery_thread(struct work_struct *private_)
         dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
                         sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
 
+#ifdef CONFIG_BACKLIGHT_CORGI
         /* If battery is low. limit backlight intensity to save power. */
         if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
                         && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
@@ -169,6 +171,7 @@ static void sharpsl_battery_thread(struct work_struct *private_)
                 sharpsl_pm.machinfo->backlight_limit(0);
                 sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
         }
+#endif
 
         /* Suspend if critical battery level */
         if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index e32e73648129..be2b2f38fd94 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
@@ -907,7 +906,32 @@ CONFIG_USB_MON=y
 #
 # USB Gadget Support
 #
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -926,7 +950,59 @@ CONFIG_MMC_AT91=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
 
 #
 # File systems
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 2dbbbc3d4ac3..868fb7b9530b 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -169,7 +169,6 @@ CONFIG_AT91_CF=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 6e994f7820c6..de43fc675616 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -160,7 +160,6 @@ CONFIG_ISA_DMA_API=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index f659c938473f..2011adfa6758 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -220,7 +220,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 3802e85f7483..4049768962d2 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index 32a0d74e0c89..fa1c5aecb5a8 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index 6bea0901bdf0..c06863847364 100644
--- a/arch/arm/configs/em_x270_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Mon Jul  9 15:18:20 2007
+# Linux kernel version: 2.6.24
+# Tue Jun 10 15:51:52 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
@@ -22,45 +22,40 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="-em-x270"
+CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
+# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
+# CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -71,42 +66,35 @@ CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
@@ -120,7 +108,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
+CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
@@ -139,8 +127,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
@@ -150,25 +139,60 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_OMAP is not set
 
 #
-# Intel PXA2xx Implementations
+# Boot options
+#
+
+#
+# Power management
 #
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_MACH_EM_X270=y
-CONFIG_PXA27x=y
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+CONFIG_MACH_AT91SAM9G20EK=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
+CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_ABRT_EV5TJ=y
 CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
@@ -176,28 +200,28 @@ CONFIG_CPU_CP15_MMU=y
 #
 # Processor Features
 #
-CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
 # CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
 
 #
 # Bus support
 #
+# CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
 # CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
@@ -209,9 +233,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -219,7 +248,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -233,6 +262,7 @@ CONFIG_CMDLINE=""
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
 # CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
 
 #
 # Userspace binary formats
@@ -245,10 +275,12 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM_EMULATION=m
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
 
 #
 # Networking
@@ -261,17 +293,13 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
@@ -283,9 +311,10 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -311,10 +340,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -323,28 +348,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
-CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-CONFIG_BT_HCIUART=m
-# CONFIG_BT_HCIUART_H4 is not set
-# CONFIG_BT_HCIUART_BCSP is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 
 #
@@ -353,13 +357,9 @@ CONFIG_BT_HCIBFUSB=m
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -368,23 +368,18 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 
 #
@@ -398,15 +393,13 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
 # CONFIG_MTD_CFI is not set
 # CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -425,12 +418,13 @@ CONFIG_MTD_CFI_I2=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -446,32 +440,23 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_AT91_ECC_SOFT=y
+# CONFIG_MTD_NAND_AT91_ECC_HW is not set
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -479,20 +464,24 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=12000
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -507,7 +496,7 @@ CONFIG_BLK_DEV_SD=y
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
@@ -519,39 +508,46 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-CONFIG_DM9000=y
-# CONFIG_SMC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -568,7 +564,6 @@ CONFIG_DM9000=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
@@ -577,10 +572,6 @@ CONFIG_DM9000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -595,10 +586,9 @@ CONFIG_INPUT=y
 #
 CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -612,29 +602,18 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
@@ -655,45 +634,50 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
 
 #
-# Dallas's 1-wire bus
+# SPI Master Controller Drivers
 #
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -701,19 +685,6 @@ CONFIG_HW_RANDOM=m
 # CONFIG_MFD_SM501 is not set
 
 #
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -723,81 +694,51 @@ CONFIG_HW_RANDOM=m
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 
 #
 # Sound
 #
-CONFIG_SOUND=m
+CONFIG_SOUND=y
 
 #
 # Advanced Linux Sound Architecture
 #
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
 CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
 #
 # Generic devices
 #
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
@@ -805,8 +746,13 @@ CONFIG_SND_AC97_CODEC=m
 #
 # ALSA ARM devices
 #
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
+# CONFIG_SND_AT91_AC97 is not set
+
+#
+# SPI devices
+#
+CONFIG_SND_AT73C213=y
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
 
 #
 # USB devices
@@ -820,16 +766,17 @@ CONFIG_SND_PXA2XX_AC97=m
 # CONFIG_SND_SOC is not set
 
 #
-# Open Sound System
+# SoC Audio support for SuperH
 #
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
 
 #
-# HID Devices
+# Open Sound System
 #
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -838,10 +785,7 @@ CONFIG_USB_HID=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
@@ -855,6 +799,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -866,6 +811,7 @@ CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -884,6 +830,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
@@ -898,7 +845,7 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -939,26 +886,66 @@ CONFIG_USB_STORAGE=y
 #
 # USB Gadget Support
 #
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=m
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
-CONFIG_MMC_PXA=m
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 
 #
-# Real Time Clock
+# LED drivers
 #
+CONFIG_LEDS_ATMEL_PWM=y
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
 # RTC interfaces
@@ -970,26 +957,28 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
-# I2C RTC drivers
-#
-
-#
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_V3020=m
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_SA1100=m
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
 
 #
 # File systems
@@ -997,14 +986,8 @@ CONFIG_RTC_DRV_SA1100=m
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
 # CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1046,7 +1029,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1062,22 +1044,21 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1092,29 +1073,23 @@ CONFIG_SUNRPC=y
 # CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_CODEPAGE_852 is not set
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
@@ -1145,108 +1120,36 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_9 is not set
 # CONFIG_NLS_ISO8859_13 is not set
 # CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
 CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
@@ -1256,10 +1159,10 @@ CONFIG_BITREVERSE=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 98e6746d02be..d8ec5f9ca6ec 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -211,7 +211,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index d846a492e5ce..85c80f723d8e 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -171,7 +171,6 @@ CONFIG_AT91_CF=m
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 4264e273202d..f7622e658163 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -166,7 +166,6 @@ CONFIG_PCMCIA_SA1100=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index e8980a9bb893..9b8748a8d9dd 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -165,7 +165,6 @@ CONFIG_PCMCIA_PXA2XX=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
index 90ed214e3673..cfeb817ad21a 100644
--- a/arch/arm/configs/ecbat91_defconfig
+++ b/arch/arm/configs/ecbat91_defconfig
@@ -230,7 +230,6 @@ CONFIG_AT91_CF=y
 #
 # CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 24a701ab33e5..21aa013793c6 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -184,7 +184,6 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index ed487b90dbed..493ecee24f94 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -251,7 +251,6 @@ CONFIG_PCMCIA_PXA2XX=m
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
new file mode 100644
index 000000000000..2a84d557adc2
--- /dev/null
+++ b/arch/arm/configs/ezx_defconfig
@@ -0,0 +1,1614 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc3
+# Mon Jul  7 17:52:21 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_PXA_EZX=y
+CONFIG_MACH_EZX_A780=y
+CONFIG_MACH_EZX_E680=y
+CONFIG_MACH_EZX_A1200=y
+CONFIG_MACH_EZX_A910=y
+CONFIG_MACH_EZX_E6=y
+CONFIG_MACH_EZX_E2=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_EZX_PCAP=y
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_PXA27x is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig
new file mode 100644
index 000000000000..bcd95b8dd2df
--- /dev/null
+++ b/arch/arm/configs/imx27ads_defconfig
@@ -0,0 +1,826 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Fri Jun 20 16:29:34 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+
+#
+# MX2 family CPU support
+#
+CONFIG_MACH_MX27=y
+
+#
+# MX2 Platforms
+#
+CONFIG_MACH_MX27ADS=y
+# CONFIG_MACH_PCM038 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_FEC_OLD is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_IMX is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 988b4d13e76f..482e57061053 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -197,7 +197,6 @@ CONFIG_PCI_LEGACY=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 83f40d4041a6..8612f58e1056 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -201,7 +201,6 @@ CONFIG_PCI_LEGACY=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 917afb5ccfac..8b0098d19d08 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -197,7 +197,6 @@ CONFIG_PCI_LEGACY=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index f8f9793b526f..84680db6c615 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -184,7 +184,6 @@ CONFIG_PCI=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 27cf022dd807..4a2f7b2372db 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -180,7 +180,6 @@ CONFIG_PCI=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index efa0485d2f7e..fc14932e3abd 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -165,6 +165,7 @@ CONFIG_ARCH_PRPMC1100=y
 CONFIG_MACH_NAS100D=y
 CONFIG_MACH_DSMG600=y
 CONFIG_ARCH_IXDP4XX=y
+CONFIG_MACH_FSG=y
 CONFIG_CPU_IXP46X=y
 CONFIG_CPU_IXP43X=y
 CONFIG_MACH_GTWX5715=y
@@ -770,7 +771,7 @@ CONFIG_ATA=y
 # CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
+CONFIG_SATA_VIA=y
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
 # CONFIG_PATA_ALI is not set
@@ -1143,7 +1144,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
+CONFIG_SENSORS_W83781D=y
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
@@ -1334,8 +1335,8 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
-# CONFIG_LEDS_IXP4XX is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_FSG=y
 
 #
 # LED Triggers
@@ -1367,7 +1368,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_X1205=y
 CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_PCF8583 is not set
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index ae51a40db6f9..6dd95a2c8d5d 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -162,7 +162,6 @@ CONFIG_CPU_TLB_V4WBI=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index c16537d9d67a..8e74c66f239d 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -126,7 +126,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Kernel Features
 #
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
new file mode 100644
index 000000000000..e3357ba10f1f
--- /dev/null
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -0,0 +1,1426 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Sun Jun 22 15:51:25 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_KIRKWOOD=y
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Marvell Kirkwood Implementations
+#
+CONFIG_MACH_DB88F6281_BP=y
+CONFIG_MACH_RD88F6192_NAS=y
+CONFIG_MACH_RD88F6281=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_FEROCEON_L2=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_ORION=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_MV64XXX=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_ORION=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_MV=y
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_ASYNC_CORE=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig
index 8ab21a0719e9..6077f2cb88e4 100644
--- a/arch/arm/configs/ks8695_defconfig
+++ b/arch/arm/configs/ks8695_defconfig
@@ -174,7 +174,6 @@ CONFIG_PCCARD_NONSTATIC=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig
new file mode 100644
index 000000000000..17da7c3b3d53
--- /dev/null
+++ b/arch/arm/configs/loki_defconfig
@@ -0,0 +1,1147 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Fri Jun 13 03:07:49 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_LOKI=y
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Marvell Loki (88RC8480) Implementations
+#
+CONFIG_MACH_LB88RC8480=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+CONFIG_NFTL=y
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_ORION=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+CONFIG_SATA_MV=y
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_MV64XXX=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index a3bf5833b87a..1a38d8e3fe66 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -173,7 +173,6 @@ CONFIG_XSCALE_PMU=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig
index 46a0f7fe1fa5..7a2e932da1c6 100644
--- a/arch/arm/configs/lpd7a404_defconfig
+++ b/arch/arm/configs/lpd7a404_defconfig
@@ -148,7 +148,6 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_AEABI is not set
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
new file mode 100644
index 000000000000..d38ebf8721a4
--- /dev/null
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -0,0 +1,1445 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Fri Jun 13 02:57:32 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+CONFIG_ARCH_MV78XX0=y
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Marvell MV78xx0 Implementations
+#
+CONFIG_MACH_DB78X00_BP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+CONFIG_CPU_FEROCEON_OLD_ID=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_FEROCEON_L2=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_ORION=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_MV64XXX=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx31ads_defconfig
new file mode 100644
index 000000000000..e05271753e15
--- /dev/null
+++ b/arch/arm/configs/mx31ads_defconfig
@@ -0,0 +1,839 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Fri Jun 20 16:21:11 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX2 is not set
+CONFIG_ARCH_MX3=y
+
+#
+# MX3 Options
+#
+CONFIG_MACH_MX31ADS=y
+# CONFIG_MACH_PCM037 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx31litekit_defconfig
new file mode 100644
index 000000000000..4f41c4135685
--- /dev/null
+++ b/arch/arm/configs/mx31litekit_defconfig
@@ -0,0 +1,1100 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Fri Jun 13 14:23:39 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX3=y
+
+#
+# MX3 Options
+#
+# CONFIG_MACH_MX31ADS is not set
+CONFIG_MACH_MX31LITE=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA is not set
+
+#
+# PC-card bridges
+#
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 57f32f39d0ff..0884f2370c3a 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -154,7 +154,6 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 650a248613e5..418ca2febbe3 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -202,7 +202,6 @@ CONFIG_AT91_CF=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 52cd99bd52fb..9578b5d9f9c7 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 14:10:30 2008
+# Linux kernel version: 2.6.26-rc4
+# Mon Jun  2 23:54:48 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -21,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,24 +41,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -73,20 +74,25 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -111,7 +117,6 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System Type
@@ -160,6 +165,15 @@ CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
 CONFIG_MACH_TS209=y
+CONFIG_MACH_LINKSTATION_PRO=y
+CONFIG_MACH_TS409=y
+CONFIG_MACH_WRT350N_V2=y
+CONFIG_MACH_TS78XX=y
+CONFIG_MACH_MV2120=y
+CONFIG_MACH_MSS2=y
+CONFIG_MACH_WNR854T=y
+CONFIG_MACH_RD88F5181L_GE=y
+CONFIG_MACH_RD88F5181L_FXO=y
 
 #
 # Boot options
@@ -168,6 +182,7 @@ CONFIG_MACH_TS209=y
 #
 # Power management
 #
+CONFIG_PLAT_ORION=y
 
 #
 # Processor Type
@@ -177,8 +192,9 @@ CONFIG_CPU_FEROCEON=y
 CONFIG_CPU_FEROCEON_OLD_ID=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_COPY_FEROCEON=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
@@ -189,7 +205,6 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_OUTER_CACHE is not set
 
 #
@@ -199,6 +214,7 @@ CONFIG_PCI=y
 CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -221,6 +237,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -238,7 +255,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
 
 #
 # Floating point emulation
@@ -311,8 +327,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -335,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -362,6 +377,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -371,6 +388,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -378,9 +396,8 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_NFTL=y
-# CONFIG_NFTL_RW is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
@@ -405,12 +422,12 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
+# CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
@@ -481,6 +498,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
@@ -542,6 +562,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -556,7 +577,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
@@ -566,7 +590,6 @@ CONFIG_SATA_MV=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -611,6 +634,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -652,7 +676,7 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_EEPRO100 is not set
-CONFIG_E100=y
+# CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -668,9 +692,7 @@ CONFIG_E100=y
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
-CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
@@ -680,27 +702,15 @@ CONFIG_E1000_NAPI=y
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
-CONFIG_SKGE=y
-CONFIG_SKY2=y
-# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
+# CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
@@ -708,6 +718,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -738,12 +749,9 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -765,10 +773,8 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # Character devices
 #
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -777,7 +783,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -792,7 +798,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -804,13 +810,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -837,6 +836,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 CONFIG_I2C_MV64XXX=y
 
 #
@@ -847,19 +847,13 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -872,6 +866,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -901,6 +896,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -910,6 +906,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -925,14 +922,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
@@ -949,12 +956,6 @@ CONFIG_DAB=y
 # CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
 # Sound
 #
 # CONFIG_SOUND is not set
@@ -985,14 +986,18 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1003,6 +1008,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1022,7 +1028,9 @@ CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1060,6 +1068,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
@@ -1068,7 +1077,7 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
-# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_GPIO=y
 
 #
 # LED Triggers
@@ -1076,6 +1085,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1105,6 +1115,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -1125,6 +1136,7 @@ CONFIG_RTC_DRV_M41T80=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1140,14 +1152,11 @@ CONFIG_JBD=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1155,8 +1164,8 @@ CONFIG_DNOTIFY=y
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
 # CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
@@ -1205,8 +1214,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1214,7 +1225,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1241,14 +1251,13 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_MAC_PARTITION is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
+# CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
@@ -1300,15 +1309,48 @@ CONFIG_NLS_ISO8859_2=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
@@ -1317,50 +1359,79 @@ CONFIG_DEBUG_USER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1369,12 +1440,14 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=y
+# CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig
new file mode 100644
index 000000000000..627474586470
--- /dev/null
+++ b/arch/arm/configs/pcm037_defconfig
@@ -0,0 +1,748 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Wed Jun 25 11:52:42 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX3=y
+
+#
+# MX3 Options
+#
+# CONFIG_MACH_MX31ADS is not set
+CONFIG_MACH_PCM037=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/pcm038_defconfig
new file mode 100644
index 000000000000..6b798c215ca8
--- /dev/null
+++ b/arch/arm/configs/pcm038_defconfig
@@ -0,0 +1,1008 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Fri Jun 20 16:38:36 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+
+#
+# MX2 family CPU support
+#
+CONFIG_MACH_MX27=y
+
+#
+# MX2 Platforms
+#
+# CONFIG_MACH_MX27ADS is not set
+CONFIG_MACH_PCM038=y
+CONFIG_MACH_PCM970_BASEBOARD=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC_OLD=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 95a22f512805..14826f0dabde 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -201,7 +201,6 @@ CONFIG_ARM_THUMB=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-CONFIG_NO_IDLE_HZ=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index b5e11aa2e290..811b8f60d19d 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -151,7 +151,6 @@ CONFIG_ARM_THUMB=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
new file mode 100644
index 000000000000..ef903bed061e
--- /dev/null
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -0,0 +1,1256 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Tue Apr 15 12:28:38 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+CONFIG_MACH_QIL_A9260=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+# CONFIG_AT91_EARLY_DBGU is not set
+CONFIG_AT91_EARLY_USART0=y
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_AT91_ECC_SOFT=y
+# CONFIG_MTD_NAND_AT91_ECC_HW is not set
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_AT91SAM9_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+CONFIG_RTC_DRV_M41T94=y
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index fc39ba1a89f3..0c09b23167ec 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -177,7 +177,6 @@ CONFIG_NR_CPUS=4
 CONFIG_HOTPLUG_CPU=y
 CONFIG_LOCAL_TIMERS=y
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index accbf529ce5b..907e54344dad 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -126,7 +126,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Kernel Features
 #
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index 5ddecb9ddf01..f62d1817d2c6 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -190,7 +190,6 @@ CONFIG_ISA_DMA_API=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index f8a1645b3d4a..35faaea8623e 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,15 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc6
-# Mon Apr  9 10:12:58 2007
+# Linux kernel version: 2.6.26-rc8
+# Mon Jul  7 16:59:23 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -18,34 +21,39 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=m
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -53,6 +61,7 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -60,34 +69,43 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -101,6 +119,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
@@ -119,14 +138,17 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -134,18 +156,32 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
 CONFIG_PLAT_S3C24XX=y
 CONFIG_CPU_S3C244X=y
+# CONFIG_S3C24XX_PWM is not set
 CONFIG_PM_SIMTEC=y
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_MACH_SMDK=y
+CONFIG_PLAT_S3C=y
+CONFIG_CPU_LLSERIAL_S3C2410=y
+CONFIG_CPU_LLSERIAL_S3C2440=y
+
+#
+# Boot options
+#
 # CONFIG_S3C_BOOT_WATCHDOG is not set
 # CONFIG_S3C_BOOT_ERROR_RESET is not set
+
+#
+# Power management
+#
 # CONFIG_S3C2410_PM_DEBUG is not set
 # CONFIG_S3C2410_PM_CHECK is not set
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_MACH_SMDK=y
 
 #
 # S3C2400 Machines
@@ -155,6 +191,8 @@ CONFIG_CPU_S3C2410_DMA=y
 CONFIG_S3C2410_PM=y
 CONFIG_S3C2410_GPIO=y
 CONFIG_S3C2410_CLOCK=y
+CONFIG_SIMTEC_NOR=y
+CONFIG_MACH_BAST_IDE=y
 
 #
 # S3C2410 Machines
@@ -167,6 +205,7 @@ CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
 CONFIG_MACH_AML_M5900=y
 CONFIG_BAST_PC104_IRQ=y
+# CONFIG_MACH_TCT_HAMMER is not set
 CONFIG_MACH_VR1000=y
 CONFIG_MACH_QT2410=y
 CONFIG_CPU_S3C2412=y
@@ -176,8 +215,10 @@ CONFIG_S3C2412_PM=y
 #
 # S3C2412 Machines
 #
+# CONFIG_MACH_JIVE is not set
 CONFIG_MACH_SMDK2413=y
 CONFIG_MACH_S3C2413=y
+# CONFIG_MACH_SMDK2412 is not set
 CONFIG_MACH_VSTMS=y
 CONFIG_CPU_S3C2440=y
 CONFIG_S3C2440_DMA=y
@@ -191,6 +232,7 @@ CONFIG_MACH_RX3715=y
 CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEXCODER_2440=y
 CONFIG_SMDK2440_CPU2440=y
+# CONFIG_MACH_AT2440EVB is not set
 CONFIG_CPU_S3C2442=y
 
 #
@@ -215,6 +257,7 @@ CONFIG_CPU_32v4T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV4T=y
 CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
@@ -236,17 +279,15 @@ CONFIG_CPU_CP15_MMU=y
 # Bus support
 #
 CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
+# CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=200
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -257,9 +298,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -279,7 +324,7 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 # At least one emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
+CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set
 # CONFIG_VFP is not set
 
@@ -295,10 +340,12 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-# CONFIG_APM_EMULATION is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=m
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -308,59 +355,67 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -373,20 +428,71 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -395,21 +501,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -420,6 +519,7 @@ CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -432,6 +532,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -457,7 +558,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -486,13 +586,10 @@ CONFIG_MTD_BAST_MAXSIZE=4
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_S3C2410_DEBUG is not set
@@ -500,30 +597,25 @@ CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 CONFIG_PARPORT=y
-# CONFIG_PARPORT_PC is not set
+CONFIG_PARPORT_PC=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
 # CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_AX88796=m
 CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
+CONFIG_PARPORT_NOT_PC=y
 # CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
+# CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -532,34 +624,34 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
 CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDE_BAST=y
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_BLK_DEV_HD is not set
 
@@ -567,101 +659,119 @@ CONFIG_BLK_DEV_IDE_BAST=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_HAVE_PATA_PLATFORM=y
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
 CONFIG_DM9000=y
+# CONFIG_ENC28J60 is not set
+CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_NET_VENDOR_RACAL is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -669,6 +779,7 @@ CONFIG_DM9000=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -678,7 +789,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -695,12 +805,21 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -721,6 +840,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -728,8 +848,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
-# CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
@@ -758,8 +876,12 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_SAMSUNG=y
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
+CONFIG_SERIAL_S3C2412=y
+CONFIG_SERIAL_S3C2440=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -768,89 +890,50 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
 # CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=y
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_S3C2410_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 CONFIG_I2C_S3C2410=y
+CONFIG_I2C_SIMTEC=y
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -860,6 +943,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BITBANG=m
 # CONFIG_SPI_BUTTERFLY is not set
+# CONFIG_SPI_LM70_LLP is not set
 CONFIG_SPI_S3C24XX=m
 CONFIG_SPI_S3C24XX_GPIO=m
 
@@ -867,30 +951,43 @@ CONFIG_SPI_S3C24XX_GPIO=m
 # SPI Protocol Masters
 #
 # CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
 
 #
-# Dallas's 1-wire bus
+# GPIO Support
 #
-# CONFIG_W1 is not set
+# CONFIG_DEBUG_GPIO is not set
 
 #
-# Hardware Monitoring support
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
 #
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=m
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -905,72 +1002,95 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# Misc devices
+# Watchdog Device Drivers
 #
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_S3C2410_WATCHDOG=y
 
 #
-# Multifunction device drivers
+# ISA-based Watchdog Cards
 #
-# CONFIG_MFD_SM501 is not set
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
 
 #
-# LED devices
+# USB-based Watchdog Cards
 #
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+# CONFIG_USBPCWATCHDOG is not set
 
 #
-# LED drivers
+# Sonics Silicon Backplane
 #
-CONFIG_LEDS_S3C24XX=m
-CONFIG_LEDS_H1940=m
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# LED Triggers
+# Multifunction device drivers
 #
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_MFD_SM501=y
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -978,12 +1098,19 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 
 #
-# Frambuffer hardware drivers
+# Frame buffer hardware drivers
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C2410=y
 # CONFIG_FB_S3C2410_DEBUG is not set
+CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -992,40 +1119,45 @@ CONFIG_FB_S3C2410=y
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 # CONFIG_LOGO is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# HID Devices
+# USB Input Devices
 #
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+# CONFIG_USB_HID is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
@@ -1033,18 +1165,22 @@ CONFIG_USB_DEVICEFS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1053,57 +1189,78 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
 # CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=y
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+CONFIG_USB_SERIAL_OPTION=m
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
@@ -1116,35 +1273,38 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
+CONFIG_USB_LED=m
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
+CONFIG_USB_LD=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
 
 #
-# MMC/SD Card support
+# LED drivers
 #
-# CONFIG_MMC is not set
+CONFIG_LEDS_S3C24XX=m
+CONFIG_LEDS_H1940=m
+# CONFIG_LEDS_GPIO is not set
 
 #
-# Real Time Clock
+# LED Triggers
 #
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1158,61 +1318,86 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# RTC drivers
+# I2C RTC drivers
 #
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-CONFIG_RTC_DRV_S3C=y
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_S3C=y
+# CONFIG_UIO is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
@@ -1222,7 +1407,9 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
 
 #
 # Pseudo filesystems
@@ -1230,10 +1417,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1248,31 +1435,32 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1280,7 +1468,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1302,94 +1489,93 @@ CONFIG_SOLARIS_X86_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 CONFIG_DEBUG_S3C_PORT=y
@@ -1400,21 +1586,100 @@ CONFIG_DEBUG_S3C_UART=0
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 484dc9739dfc..8688362bcf7b 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -211,7 +211,6 @@ CONFIG_ARM_THUMB=y
 #
 # CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index aa7a01179500..7d59fb1f1cea 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -164,7 +164,6 @@ CONFIG_PCMCIA_PXA2XX=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 576b8339f0d6..07dfb98df4f0 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -247,7 +247,6 @@ CONFIG_ARM_THUMB=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=200
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 6db6392806f9..8b7a431a8bfc 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -195,7 +195,6 @@ CONFIG_PCMCIA_PXA2XX=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
new file mode 100644
index 000000000000..3680bd2df26d
--- /dev/null
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -0,0 +1,1142 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Tue Apr 15 11:39:35 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+CONFIG_MACH_USB_A9260=y
+# CONFIG_MACH_QIL_A9260 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_AT91_ECC_SOFT=y
+# CONFIG_MTD_NAND_AT91_ECC_HW is not set
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
new file mode 100644
index 000000000000..48d455bc7363
--- /dev/null
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -0,0 +1,1134 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Tue Apr 15 11:15:19 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9263=y
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9263 Board Type
+#
+# CONFIG_MACH_AT91SAM9263EK is not set
+CONFIG_MACH_USB_A9263=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_AT91_ECC_SOFT=y
+# CONFIG_MTD_NAND_AT91_ECC_HW is not set
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 48dca69addae..8355f88f7292 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -151,7 +151,6 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
diff --git a/arch/arm/configs/cm_x270_defconfig b/arch/arm/configs/xm_x270_defconfig
index 5cab08397ae7..aa40d91ce599 100644
--- a/arch/arm/configs/cm_x270_defconfig
+++ b/arch/arm/configs/xm_x270_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Wed Jul 18 14:11:48 2007
+# Linux kernel version: 2.6.25
+# Sun May 11 15:12:52 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
@@ -21,21 +21,18 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
@@ -44,13 +41,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -58,6 +62,7 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -65,24 +70,34 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -99,11 +114,12 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
@@ -131,6 +147,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
@@ -140,19 +158,41 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
 CONFIG_DMABOUNCE=y
 
 #
-# Intel PXA2xx Implementations
+# Intel PXA2xx/PXA3xx Implementations
 #
+
+#
+# Select target boards
+#
+# CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
 # CONFIG_MACH_TRIZEPS4 is not set
+CONFIG_MACH_EM_X270=y
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
 CONFIG_MACH_ARMCORE=y
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
 CONFIG_PXA27x=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
 
 #
 # Processor Type
@@ -161,6 +201,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -182,21 +223,40 @@ CONFIG_PCI=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCI_HOST_ITE8152=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
 
 #
-# PCCARD (PCMCIA/CardBus) support
+# PC-card bridges
 #
-# CONFIG_PCCARD is not set
+CONFIG_YENTA=m
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_ENE_TUNE is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCMCIA_PXA2XX=m
+CONFIG_PCCARD_NONSTATIC=m
 
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -205,6 +265,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -217,11 +279,16 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="root=1f03 mem=32M"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
 #
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
 # Floating point emulation
 #
 
@@ -238,16 +305,17 @@ CONFIG_FPE_NWFPE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-# CONFIG_APM_EMULATION is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=m
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -258,15 +326,16 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
@@ -275,6 +344,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
@@ -285,15 +355,13 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -310,10 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -321,8 +385,33 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+# CONFIG_BT_RFCOMM_TTY is not set
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
 
 #
@@ -331,12 +420,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -347,38 +431,47 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-CONFIG_MTD=m
+CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -389,15 +482,29 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x400000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
 # CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -415,18 +522,19 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_SHARPSL is not set
 # CONFIG_MTD_NAND_CAFE is not set
-CONFIG_MTD_NAND_CM_X270=m
+CONFIG_MTD_NAND_CM_X270=y
 # CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -447,36 +555,13 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=12000
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
@@ -486,7 +571,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -513,12 +598,9 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -529,6 +611,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -539,8 +622,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
@@ -550,16 +635,69 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -574,6 +712,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -585,64 +724,65 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=1
 # CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
-CONFIG_8139TOO=m
+CONFIG_8139TOO=y
 # CONFIG_8139TOO_PIO is not set
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_MLX4_CORE is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBERTAS_CS is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
 
 #
 # USB Network Adapters
@@ -651,15 +791,24 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -675,20 +824,32 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=m
+# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
@@ -697,13 +858,22 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -713,7 +883,9 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -730,83 +902,141 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
 
 #
-# SPI support
+# GPIO Support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+# CONFIG_DEBUG_GPIO is not set
 
 #
-# Multifunction device drivers
+# I2C GPIO expanders:
 #
-# CONFIG_MFD_SM501 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 
 #
-# LED devices
+# SPI GPIO expanders:
 #
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# LED drivers
+# Sonics Silicon Backplane
 #
-CONFIG_LEDS_CM_X270=y
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# LED Triggers
+# Multifunction device drivers
 #
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
 CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
@@ -842,9 +1072,17 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
+# CONFIG_FB_AM200EPD is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -904,10 +1142,12 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_DARLA20 is not set
@@ -932,6 +1172,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -949,6 +1190,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 # CONFIG_SND_AC97_POWER_SAVE is not set
@@ -966,18 +1208,33 @@ CONFIG_SND_PXA2XX_AC97=m
 # CONFIG_SND_USB_CAIAQ is not set
 
 #
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
 # System on Chip audio support
 #
 # CONFIG_SND_SOC is not set
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -992,6 +1249,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1000,8 +1258,9 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
@@ -1033,13 +1292,16 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1052,10 +1314,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1080,14 +1338,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
@@ -1098,6 +1348,7 @@ CONFIG_MMC=m
 #
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
 
 #
 # MMC/SD Host Controller Drivers
@@ -1105,10 +1356,22 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_TIFM_SD is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 
 #
-# Real Time Clock
+# LED drivers
 #
+# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_CM_X270=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1125,11 +1388,32 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 CONFIG_RTC_DRV_V3020=y
@@ -1138,19 +1422,7 @@ CONFIG_RTC_DRV_V3020=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SA1100=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1164,20 +1436,16 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1191,9 +1459,9 @@ CONFIG_DNOTIFY=y
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
@@ -1207,7 +1475,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1220,22 +1487,30 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1245,9 +1520,13 @@ CONFIG_SUNRPC=y
 # CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1255,15 +1534,27 @@ CONFIG_SMB_FS=y
 #
 # Partition Types
 #
-# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1287,7 +1578,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1300,53 +1591,52 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_FRAME_WARN=0
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1355,55 +1645,96 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ad455ff5aebe..1d296fc8494e 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -4,6 +4,10 @@
 
 AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
 
+ifdef CONFIG_DYNAMIC_FTRACE
+CFLAGS_REMOVE_ftrace.o = -pg
+endif
+
 # Object file lists.
 
 obj-y           := compat.o entry-armv.o entry-common.o irq.o \
@@ -18,11 +22,13 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)           += dma-isa.o
 obj-$(CONFIG_PCI)               += bios32.o isa.o
 obj-$(CONFIG_SMP)               += smp.o
+obj-$(CONFIG_DYNAMIC_FTRACE)    += ftrace.o
 obj-$(CONFIG_KEXEC)             += machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)           += kprobes.o kprobes-decode.o
 obj-$(CONFIG_ATAGS_PROC)        += atags.o
 obj-$(CONFIG_OABI_COMPAT)       += sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)       += thumbee.o
+obj-$(CONFIG_KGDB)              += kgdb.o
 
 obj-$(CONFIG_CRUNCH)            += crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o            := -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 688b7b1ee416..cc7b246e9652 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -18,6 +18,7 @@
 #include <asm/io.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/ftrace.h>
 
 /*
  * libgcc functions - functions that are used internally by the
@@ -181,3 +182,7 @@ EXPORT_SYMBOL(_find_next_bit_be);
 #endif
 
 EXPORT_SYMBOL(copy_page);
+
+#ifdef CONFIG_FTRACE
+EXPORT_SYMBOL(mcount);
+#endif
diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags.c
index 64c420805e6f..42a1a1415fa6 100644
--- a/arch/arm/kernel/atags.c
+++ b/arch/arm/kernel/atags.c
@@ -1,5 +1,4 @@
 #include <linux/slab.h>
-#include <linux/kexec.h>
 #include <linux/proc_fs.h>
 #include <asm/setup.h>
 #include <asm/types.h>
@@ -7,9 +6,8 @@
 
 struct buffer {
         size_t size;
-        char *data;
+        char data[];
 };
-static struct buffer tags_buffer;
 
 static int
 read_buffer(char* page, char** start, off_t off, int count,
@@ -29,58 +27,57 @@ read_buffer(char* page, char** start, off_t off, int count,
         return count;
 }
 
-
-static int
-create_proc_entries(void)
-{
-        struct proc_dir_entry* tags_entry;
-
-        tags_entry = create_proc_read_entry("atags", 0400, NULL, read_buffer, &tags_buffer);
-        if (!tags_entry)
-                return -ENOMEM;
-
-        return 0;
-}
-
-
-static char __initdata atags_copy_buf[KEXEC_BOOT_PARAMS_SIZE];
-static char __initdata *atags_copy;
+#define BOOT_PARAMS_SIZE 1536
+static char __initdata atags_copy[BOOT_PARAMS_SIZE];
 
 void __init save_atags(const struct tag *tags)
 {
-        atags_copy = atags_copy_buf;
-        memcpy(atags_copy, tags, KEXEC_BOOT_PARAMS_SIZE);
+        memcpy(atags_copy, tags, sizeof(atags_copy));
 }
 
-
 static int __init init_atags_procfs(void)
 {
-        struct tag *tag;
-        int error;
+        /*
+         * This cannot go into save_atags() because kmalloc and proc don't work
+         * yet when it is called.
+         */
+        struct proc_dir_entry *tags_entry;
+        struct tag *tag = (struct tag *)atags_copy;
+        struct buffer *b;
+        size_t size;
 
-        if (!atags_copy) {
-                printk(KERN_WARNING "Exporting ATAGs: No saved tags found\n");
-                return -EIO;
+        if (tag->hdr.tag != ATAG_CORE) {
+                printk(KERN_INFO "No ATAGs?");
+                return -EINVAL;
         }
 
-        for (tag = (struct tag *) atags_copy; tag->hdr.size; tag = tag_next(tag))
+        for (; tag->hdr.size; tag = tag_next(tag))
                 ;
 
-        tags_buffer.size = ((char *) tag - atags_copy) + sizeof(tag->hdr);
-        tags_buffer.data = kmalloc(tags_buffer.size, GFP_KERNEL);
-        if (tags_buffer.data == NULL)
-                return -ENOMEM;
-        memcpy(tags_buffer.data, atags_copy, tags_buffer.size);
-
-        error = create_proc_entries();
-        if (error) {
-                printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
-                kfree(tags_buffer.data);
-                tags_buffer.size = 0;
-                tags_buffer.data = NULL;
-        }
+        /* include the terminating ATAG_NONE */
+        size = (char *)tag - atags_copy + sizeof(struct tag_header);
 
-        return error;
-}
+        WARN_ON(tag->hdr.tag != ATAG_NONE);
+
+        b = kmalloc(sizeof(*b) + size, GFP_KERNEL);
+        if (!b)
+                goto nomem;
 
+        b->size = size;
+        memcpy(b->data, atags_copy, size);
+
+        tags_entry = create_proc_read_entry("atags", 0400,
+                        NULL, read_buffer, b);
+
+        if (!tags_entry)
+                goto nomem;
+
+        return 0;
+
+nomem:
+        kfree(b);
+        printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
+
+        return -ENOMEM;
+}
 arch_initcall(init_atags_procfs);
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index a53c0aba5c14..f5cfdabcb87d 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -680,7 +680,7 @@ static int __init ecard_probeirqhw(void)
 #define IO_EC_MEMC8_BASE 0
 #endif
 
-unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
+static unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
 {
         unsigned long address = 0;
         int slot = ec->slot_no;
@@ -783,7 +783,7 @@ static void ecard_proc_init(void)
 
 #define ec_set_resource(ec,nr,st,sz)                            \
         do {                                                    \
-                (ec)->resource[nr].name = ec->dev.bus_id;       \
+                (ec)->resource[nr].name = dev_name(&ec->dev);   \
                 (ec)->resource[nr].start = st;                  \
                 (ec)->resource[nr].end = (st) + (sz) - 1;       \
                 (ec)->resource[nr].flags = IORESOURCE_MEM;      \
@@ -853,8 +853,7 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
         for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
                 if (ec->resource[i].flags &&
                     request_resource(&iomem_resource, &ec->resource[i])) {
-                        printk(KERN_ERR "%s: resource(s) not available\n",
-                                ec->dev.bus_id);
+                        dev_err(&ec->dev, "resource(s) not available\n");
                         ec->resource[i].end -= ec->resource[i].start;
                         ec->resource[i].start = 0;
                         ec->resource[i].flags = 0;
@@ -1002,7 +1001,7 @@ ecard_probe(int slot, card_type_t type)
         }
 
         rc = -ENODEV;
-        if ((ec->podaddr = ecard_address(ec, type, ECARD_SYNC)) == 0)
+        if ((ec->podaddr = __ecard_address(ec, type, ECARD_SYNC)) == 0)
                 goto nodev;
 
         cid.r_zero = 1;
@@ -1141,10 +1140,10 @@ static int ecard_drv_probe(struct device *dev)
 
         id = ecard_match_device(drv->id_table, ec);
 
-        ecard_claim(ec);
+        ec->claimed = 1;
         ret = drv->probe(ec, id);
         if (ret)
-                ecard_release(ec);
+                ec->claimed = 0;
         return ret;
 }
 
@@ -1154,7 +1153,7 @@ static int ecard_drv_remove(struct device *dev)
         struct ecard_driver *drv = ECARD_DRV(dev->driver);
 
         drv->remove(ec);
-        ecard_release(ec);
+        ec->claimed = 0;
 
         /*
          * Restore the default operations.  We ensure that the
@@ -1182,7 +1181,7 @@ static void ecard_drv_shutdown(struct device *dev)
         if (dev->driver) {
                 if (drv->shutdown)
                         drv->shutdown(ec);
-                ecard_release(ec);
+                ec->claimed = 0;
         }
 
         /*
@@ -1239,7 +1238,6 @@ static int ecard_bus_init(void)
 postcore_initcall(ecard_bus_init);
 
 EXPORT_SYMBOL(ecard_readchunk);
-EXPORT_SYMBOL(__ecard_address);
 EXPORT_SYMBOL(ecard_register_driver);
 EXPORT_SYMBOL(ecard_remove_driver);
 EXPORT_SYMBOL(ecard_bus_type);
diff --git a/arch/arm/kernel/ecard.h b/arch/arm/kernel/ecard.h
index d7c2dacf935d..4642d436be2a 100644
--- a/arch/arm/kernel/ecard.h
+++ b/arch/arm/kernel/ecard.h
@@ -54,3 +54,16 @@ struct ex_chunk_dir {
 #define c_len(x)        ((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
 #define c_start(x)      ((x)->r_start)
 };
+
+typedef enum ecard_type {               /* Cards address space          */
+        ECARD_IOC,
+        ECARD_MEMC,
+        ECARD_EASI
+} card_type_t;
+
+typedef enum {                          /* Speed for ECARD_IOC space    */
+        ECARD_SLOW       = 0,
+        ECARD_MEDIUM     = 1,
+        ECARD_FAST       = 2,
+        ECARD_SYNC       = 3
+} card_speed_t;
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 597ed00a08d8..84694e88b428 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -9,6 +9,7 @@
  */
 
 #include <asm/unistd.h>
+#include <asm/ftrace.h>
 #include <asm/arch/entry-macro.S>
 
 #include "entry-header.S"
@@ -99,6 +100,56 @@ ENTRY(ret_from_fork)
 #undef CALL
 #define CALL(x) .long x
 
+#ifdef CONFIG_FTRACE
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(mcount)
+        stmdb sp!, {r0-r3, lr}
+        mov r0, lr
+        sub r0, r0, #MCOUNT_INSN_SIZE
+
+        .globl mcount_call
+mcount_call:
+        bl ftrace_stub
+        ldmia sp!, {r0-r3, pc}
+
+ENTRY(ftrace_caller)
+        stmdb sp!, {r0-r3, lr}
+        ldr r1, [fp, #-4]
+        mov r0, lr
+        sub r0, r0, #MCOUNT_INSN_SIZE
+
+        .globl ftrace_call
+ftrace_call:
+        bl ftrace_stub
+        ldmia sp!, {r0-r3, pc}
+
+#else
+
+ENTRY(mcount)
+        stmdb sp!, {r0-r3, lr}
+        ldr r0, =ftrace_trace_function
+        ldr r2, [r0]
+        adr r0, ftrace_stub
+        cmp r0, r2
+        bne trace
+        ldmia sp!, {r0-r3, pc}
+
+trace:
+        ldr r1, [fp, #-4]
+        mov r0, lr
+        sub r0, r0, #MCOUNT_INSN_SIZE
+        mov lr, pc
+        mov pc, r2
+        ldmia sp!, {r0-r3, pc}
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+        .globl ftrace_stub
+ftrace_stub:
+        mov pc, lr
+
+#endif /* CONFIG_FTRACE */
+
 /*=============================================================================
  * SWI handler
  *-----------------------------------------------------------------------------
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
new file mode 100644
index 000000000000..76d50e6091bc
--- /dev/null
+++ b/arch/arm/kernel/ftrace.c
@@ -0,0 +1,116 @@
+/*
+ * Dynamic function tracing support.
+ *
+ * Copyright (C) 2008 Abhishek Sagar <sagar.abhishek@gmail.com>
+ *
+ * For licencing details, see COPYING.
+ *
+ * Defines low-level handling of mcount calls when the kernel
+ * is compiled with the -pg flag. When using dynamic ftrace, the
+ * mcount call-sites get patched lazily with NOP till they are
+ * enabled. All code mutation routines here take effect atomically.
+ */
+
+#include <linux/ftrace.h>
+
+#include <asm/cacheflush.h>
+#include <asm/ftrace.h>
+
+#define PC_OFFSET      8
+#define BL_OPCODE      0xeb000000
+#define BL_OFFSET_MASK 0x00ffffff
+
+static unsigned long bl_insn;
+static const unsigned long NOP = 0xe1a00000; /* mov r0, r0 */
+
+unsigned char *ftrace_nop_replace(void)
+{
+        return (char *)&NOP;
+}
+
+/* construct a branch (BL) instruction to addr */
+unsigned char *ftrace_call_replace(unsigned long pc, unsigned long addr)
+{
+        long offset;
+
+        offset = (long)addr - (long)(pc + PC_OFFSET);
+        if (unlikely(offset < -33554432 || offset > 33554428)) {
+                /* Can't generate branches that far (from ARM ARM). Ftrace
+                 * doesn't generate branches outside of kernel text.
+                 */
+                WARN_ON_ONCE(1);
+                return NULL;
+        }
+        offset = (offset >> 2) & BL_OFFSET_MASK;
+        bl_insn = BL_OPCODE | offset;
+        return (unsigned char *)&bl_insn;
+}
+
+int ftrace_modify_code(unsigned long pc, unsigned char *old_code,
+                       unsigned char *new_code)
+{
+        unsigned long err = 0, replaced = 0, old, new;
+
+        old = *(unsigned long *)old_code;
+        new = *(unsigned long *)new_code;
+
+        __asm__ __volatile__ (
+                "1:  ldr    %1, [%2]  \n"
+                "    cmp    %1, %4    \n"
+                "2:  streq  %3, [%2]  \n"
+                "    cmpne  %1, %3    \n"
+                "    movne  %0, #2    \n"
+                "3:\n"
+
+                ".section .fixup, \"ax\"\n"
+                "4:  mov  %0, #1  \n"
+                "    b    3b      \n"
+                ".previous\n"
+
+                ".section __ex_table, \"a\"\n"
+                "    .long 1b, 4b \n"
+                "    .long 2b, 4b \n"
+                ".previous\n"
+
+                : "=r"(err), "=r"(replaced)
+                : "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced)
+                : "memory");
+
+        if (!err && (replaced == old))
+                flush_icache_range(pc, pc + MCOUNT_INSN_SIZE);
+
+        return err;
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+        int ret;
+        unsigned long pc, old;
+        unsigned char *new;
+
+        pc = (unsigned long)&ftrace_call;
+        memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE);
+        new = ftrace_call_replace(pc, (unsigned long)func);
+        ret = ftrace_modify_code(pc, (unsigned char *)&old, new);
+        return ret;
+}
+
+int ftrace_mcount_set(unsigned long *data)
+{
+        unsigned long pc, old;
+        unsigned long *addr = data;
+        unsigned char *new;
+
+        pc = (unsigned long)&mcount_call;
+        memcpy(&old, &mcount_call, MCOUNT_INSN_SIZE);
+        new = ftrace_call_replace(pc, *addr);
+        *addr = ftrace_modify_code(pc, (unsigned char *)&old, new);
+        return 0;
+}
+
+/* run from kstop_machine */
+int __init ftrace_dyn_arch_init(void *data)
+{
+        ftrace_mcount_set(data);
+        return 0;
+}
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
new file mode 100644
index 000000000000..aaffaecffcd1
--- /dev/null
+++ b/arch/arm/kernel/kgdb.c
@@ -0,0 +1,201 @@
+/*
+ * arch/arm/kernel/kgdb.c
+ *
+ * ARM KGDB support
+ *
+ * Copyright (c) 2002-2004 MontaVista Software, Inc
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:  George Davis <davis_g@mvista.com>
+ *           Deepak Saxena <dsaxena@plexity.net>
+ */
+#include <linux/kgdb.h>
+#include <asm/traps.h>
+
+/* Make a local copy of the registers passed into the handler (bletch) */
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+        int regno;
+
+        /* Initialize all to zero. */
+        for (regno = 0; regno < GDB_MAX_REGS; regno++)
+                gdb_regs[regno] = 0;
+
+        gdb_regs[_R0]           = kernel_regs->ARM_r0;
+        gdb_regs[_R1]           = kernel_regs->ARM_r1;
+        gdb_regs[_R2]           = kernel_regs->ARM_r2;
+        gdb_regs[_R3]           = kernel_regs->ARM_r3;
+        gdb_regs[_R4]           = kernel_regs->ARM_r4;
+        gdb_regs[_R5]           = kernel_regs->ARM_r5;
+        gdb_regs[_R6]           = kernel_regs->ARM_r6;
+        gdb_regs[_R7]           = kernel_regs->ARM_r7;
+        gdb_regs[_R8]           = kernel_regs->ARM_r8;
+        gdb_regs[_R9]           = kernel_regs->ARM_r9;
+        gdb_regs[_R10]          = kernel_regs->ARM_r10;
+        gdb_regs[_FP]           = kernel_regs->ARM_fp;
+        gdb_regs[_IP]           = kernel_regs->ARM_ip;
+        gdb_regs[_SPT]          = kernel_regs->ARM_sp;
+        gdb_regs[_LR]           = kernel_regs->ARM_lr;
+        gdb_regs[_PC]           = kernel_regs->ARM_pc;
+        gdb_regs[_CPSR]         = kernel_regs->ARM_cpsr;
+}
+
+/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+        kernel_regs->ARM_r0     = gdb_regs[_R0];
+        kernel_regs->ARM_r1     = gdb_regs[_R1];
+        kernel_regs->ARM_r2     = gdb_regs[_R2];
+        kernel_regs->ARM_r3     = gdb_regs[_R3];
+        kernel_regs->ARM_r4     = gdb_regs[_R4];
+        kernel_regs->ARM_r5     = gdb_regs[_R5];
+        kernel_regs->ARM_r6     = gdb_regs[_R6];
+        kernel_regs->ARM_r7     = gdb_regs[_R7];
+        kernel_regs->ARM_r8     = gdb_regs[_R8];
+        kernel_regs->ARM_r9     = gdb_regs[_R9];
+        kernel_regs->ARM_r10    = gdb_regs[_R10];
+        kernel_regs->ARM_fp     = gdb_regs[_FP];
+        kernel_regs->ARM_ip     = gdb_regs[_IP];
+        kernel_regs->ARM_sp     = gdb_regs[_SPT];
+        kernel_regs->ARM_lr     = gdb_regs[_LR];
+        kernel_regs->ARM_pc     = gdb_regs[_PC];
+        kernel_regs->ARM_cpsr   = gdb_regs[_CPSR];
+}
+
+void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
+{
+        struct pt_regs *thread_regs;
+        int regno;
+
+        /* Just making sure... */
+        if (task == NULL)
+                return;
+
+        /* Initialize to zero */
+        for (regno = 0; regno < GDB_MAX_REGS; regno++)
+                gdb_regs[regno] = 0;
+
+        /* Otherwise, we have only some registers from switch_to() */
+        thread_regs             = task_pt_regs(task);
+        gdb_regs[_R0]           = thread_regs->ARM_r0;
+        gdb_regs[_R1]           = thread_regs->ARM_r1;
+        gdb_regs[_R2]           = thread_regs->ARM_r2;
+        gdb_regs[_R3]           = thread_regs->ARM_r3;
+        gdb_regs[_R4]           = thread_regs->ARM_r4;
+        gdb_regs[_R5]           = thread_regs->ARM_r5;
+        gdb_regs[_R6]           = thread_regs->ARM_r6;
+        gdb_regs[_R7]           = thread_regs->ARM_r7;
+        gdb_regs[_R8]           = thread_regs->ARM_r8;
+        gdb_regs[_R9]           = thread_regs->ARM_r9;
+        gdb_regs[_R10]          = thread_regs->ARM_r10;
+        gdb_regs[_FP]           = thread_regs->ARM_fp;
+        gdb_regs[_IP]           = thread_regs->ARM_ip;
+        gdb_regs[_SPT]          = thread_regs->ARM_sp;
+        gdb_regs[_LR]           = thread_regs->ARM_lr;
+        gdb_regs[_PC]           = thread_regs->ARM_pc;
+        gdb_regs[_CPSR]         = thread_regs->ARM_cpsr;
+}
+
+static int compiled_break;
+
+int kgdb_arch_handle_exception(int exception_vector, int signo,
+                               int err_code, char *remcom_in_buffer,
+                               char *remcom_out_buffer,
+                               struct pt_regs *linux_regs)
+{
+        unsigned long addr;
+        char *ptr;
+
+        switch (remcom_in_buffer[0]) {
+        case 'D':
+        case 'k':
+        case 'c':
+                kgdb_contthread = NULL;
+
+                /*
+                 * Try to read optional parameter, pc unchanged if no parm.
+                 * If this was a compiled breakpoint, we need to move
+                 * to the next instruction or we will just breakpoint
+                 * over and over again.
+                 */
+                ptr = &remcom_in_buffer[1];
+                if (kgdb_hex2long(&ptr, &addr))
+                        linux_regs->ARM_pc = addr;
+                else if (compiled_break == 1)
+                        linux_regs->ARM_pc += 4;
+
+                compiled_break = 0;
+
+                return 0;
+        }
+
+        return -1;
+}
+
+static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+        kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+        return 0;
+}
+
+static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+        compiled_break = 1;
+        kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+        return 0;
+}
+
+static struct undef_hook kgdb_brkpt_hook = {
+        .instr_mask             = 0xffffffff,
+        .instr_val              = KGDB_BREAKINST,
+        .fn                     = kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_hook = {
+        .instr_mask             = 0xffffffff,
+        .instr_val              = KGDB_COMPILED_BREAK,
+        .fn                     = kgdb_compiled_brk_fn
+};
+
+/**
+ *      kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ *      This function will handle the initalization of any architecture
+ *      specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+        register_undef_hook(&kgdb_brkpt_hook);
+        register_undef_hook(&kgdb_compiled_brkpt_hook);
+
+        return 0;
+}
+
+/**
+ *      kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *      This function will handle the uninitalization of any architecture
+ *      specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+        unregister_undef_hook(&kgdb_brkpt_hook);
+        unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+}
+
+/*
+ * Register our undef instruction hooks with ARM undef core.
+ * We regsiter a hook specifically looking for the KGB break inst
+ * and we handle the normal undef case within the do_undefinstr
+ * handler.
+ */
+struct kgdb_arch arch_kgdb_ops = {
+#ifndef __ARMEB__
+        .gdb_bpt_instr          = {0xfe, 0xde, 0xff, 0xe7}
+#else /* ! __ARMEB__ */
+        .gdb_bpt_instr          = {0xe7, 0xff, 0xde, 0xfe}
+#endif
+};
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 5593dd207216..5ee39e10c8d1 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -274,7 +274,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
  * for kretprobe handlers which should normally be interested in r0 only
  * anyway.
  */
-static void __attribute__((naked)) __kprobes kretprobe_trampoline(void)
+void __naked __kprobes kretprobe_trampoline(void)
 {
         __asm__ __volatile__ (
                 "stmdb  sp!, {r0 - r11}         \n\t"
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 46bf2ede6128..199b3680118b 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -133,10 +133,8 @@ static void default_idle(void)
                 cpu_relax();
         else {
                 local_irq_disable();
-                if (!need_resched()) {
-                        timer_dyn_reprogram();
+                if (!need_resched())
                         arch_idle();
-                }
                 local_irq_enable();
         }
 }
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b7b0720bc1bb..38f0e7940a13 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <asm/traps.h>
 
 #include "compat.h"
 #include "atags.h"
@@ -853,6 +854,7 @@ void __init setup_arch(char **cmdline_p)
         conswitchp = &dummy_con;
 #endif
 #endif
+        early_trap_init();
 }
 
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index eefae1de334c..5a7c09564d13 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -68,20 +68,10 @@ enum ipi_msg_type {
         IPI_TIMER,
         IPI_RESCHEDULE,
         IPI_CALL_FUNC,
+        IPI_CALL_FUNC_SINGLE,
         IPI_CPU_STOP,
 };
 
-struct smp_call_struct {
-        void (*func)(void *info);
-        void *info;
-        int wait;
-        cpumask_t pending;
-        cpumask_t unfinished;
-};
-
-static struct smp_call_struct * volatile smp_call_function_data;
-static DEFINE_SPINLOCK(smp_call_function_lock);
-
 int __cpuinit __cpu_up(unsigned int cpu)
 {
         struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
@@ -366,114 +356,15 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
         local_irq_restore(flags);
 }
 
-/*
- * You must not call this function with disabled interrupts, from a
- * hardware interrupt handler, nor from a bottom half handler.
- */
-static int smp_call_function_on_cpu(void (*func)(void *info), void *info,
-                                    int retry, int wait, cpumask_t callmap)
-{
-        struct smp_call_struct data;
-        unsigned long timeout;
-        int ret = 0;
-
-        data.func = func;
-        data.info = info;
-        data.wait = wait;
-
-        cpu_clear(smp_processor_id(), callmap);
-        if (cpus_empty(callmap))
-                goto out;
-
-        data.pending = callmap;
-        if (wait)
-                data.unfinished = callmap;
-
-        /*
-         * try to get the mutex on smp_call_function_data
-         */
-        spin_lock(&smp_call_function_lock);
-        smp_call_function_data = &data;
-
-        send_ipi_message(callmap, IPI_CALL_FUNC);
-
-        timeout = jiffies + HZ;
-        while (!cpus_empty(data.pending) && time_before(jiffies, timeout))
-                barrier();
-
-        /*
-         * did we time out?
-         */
-        if (!cpus_empty(data.pending)) {
-                /*
-                 * this may be causing our panic - report it
-                 */
-                printk(KERN_CRIT
-                       "CPU%u: smp_call_function timeout for %p(%p)\n"
-                       "      callmap %lx pending %lx, %swait\n",
-                       smp_processor_id(), func, info, *cpus_addr(callmap),
-                       *cpus_addr(data.pending), wait ? "" : "no ");
-
-                /*
-                 * TRACE
-                 */
-                timeout = jiffies + (5 * HZ);
-                while (!cpus_empty(data.pending) && time_before(jiffies, timeout))
-                        barrier();
-
-                if (cpus_empty(data.pending))
-                        printk(KERN_CRIT "     RESOLVED\n");
-                else
-                        printk(KERN_CRIT "     STILL STUCK\n");
-        }
-
-        /*
-         * whatever happened, we're done with the data, so release it
-         */
-        smp_call_function_data = NULL;
-        spin_unlock(&smp_call_function_lock);
-
-        if (!cpus_empty(data.pending)) {
-                ret = -ETIMEDOUT;
-                goto out;
-        }
-
-        if (wait)
-                while (!cpus_empty(data.unfinished))
-                        barrier();
- out:
-
-        return 0;
-}
-
-int smp_call_function(void (*func)(void *info), void *info, int retry,
-                      int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-        return smp_call_function_on_cpu(func, info, retry, wait,
-                                        cpu_online_map);
+        send_ipi_message(mask, IPI_CALL_FUNC);
 }
-EXPORT_SYMBOL_GPL(smp_call_function);
 
-int smp_call_function_single(int cpu, void (*func)(void *info), void *info,
-                             int retry, int wait)
+void arch_send_call_function_single_ipi(int cpu)
 {
-        /* prevent preemption and reschedule on another processor */
-        int current_cpu = get_cpu();
-        int ret = 0;
-
-        if (cpu == current_cpu) {
-                local_irq_disable();
-                func(info);
-                local_irq_enable();
-        } else
-                ret = smp_call_function_on_cpu(func, info, retry, wait,
-                                               cpumask_of_cpu(cpu));
-
-        put_cpu();
-
-        return ret;
+        send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
 }
-EXPORT_SYMBOL_GPL(smp_call_function_single);
 
 void show_ipi_list(struct seq_file *p)
 {
@@ -521,27 +412,6 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs)
 }
 #endif
 
-/*
- * ipi_call_function - handle IPI from smp_call_function()
- *
- * Note that we copy data out of the cross-call structure and then
- * let the caller know that we're here and have done with their data
- */
-static void ipi_call_function(unsigned int cpu)
-{
-        struct smp_call_struct *data = smp_call_function_data;
-        void (*func)(void *info) = data->func;
-        void *info = data->info;
-        int wait = data->wait;
-
-        cpu_clear(cpu, data->pending);
-
-        func(info);
-
-        if (wait)
-                cpu_clear(cpu, data->unfinished);
-}
-
 static DEFINE_SPINLOCK(stop_lock);
 
 /*
@@ -611,7 +481,11 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs)
                                 break;
 
                         case IPI_CALL_FUNC:
-                                ipi_call_function(cpu);
+                                generic_smp_call_function_interrupt();
+                                break;
+
+                        case IPI_CALL_FUNC_SINGLE:
+                                generic_smp_call_function_single_interrupt();
                                 break;
 
                         case IPI_CPU_STOP:
@@ -662,14 +536,13 @@ int setup_profiling_timer(unsigned int multiplier)
 }
 
 static int
-on_each_cpu_mask(void (*func)(void *), void *info, int retry, int wait,
-                 cpumask_t mask)
+on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
 {
         int ret = 0;
 
         preempt_disable();
 
-        ret = smp_call_function_on_cpu(func, info, retry, wait, mask);
+        ret = smp_call_function_mask(mask, func, info, wait);
         if (cpu_isset(smp_processor_id(), mask))
                 func(info);
 
@@ -731,14 +604,14 @@ static inline void ipi_flush_tlb_kernel_range(void *arg)
 
 void flush_tlb_all(void)
 {
-        on_each_cpu(ipi_flush_tlb_all, NULL, 1, 1);
+        on_each_cpu(ipi_flush_tlb_all, NULL, 1);
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
         cpumask_t mask = mm->cpu_vm_mask;
 
-        on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, 1, mask);
+        on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
@@ -749,7 +622,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
         ta.ta_vma = vma;
         ta.ta_start = uaddr;
 
-        on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, 1, mask);
+        on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
@@ -758,7 +631,7 @@ void flush_tlb_kernel_page(unsigned long kaddr)
 
         ta.ta_start = kaddr;
 
-        on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1, 1);
+        on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma,
@@ -771,7 +644,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
         ta.ta_start = start;
         ta.ta_end = end;
 
-        on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, 1, mask);
+        on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
@@ -781,5 +654,5 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
         ta.ta_start = start;
         ta.ta_end = end;
 
-        on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1, 1);
+        on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
 }
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index ae31deb2d065..fc650f64df43 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -36,6 +36,7 @@ EXPORT_SYMBOL(walk_stackframe);
 #ifdef CONFIG_STACKTRACE
 struct stack_trace_data {
         struct stack_trace *trace;
+        unsigned int no_sched_functions;
         unsigned int skip;
 };
 
@@ -43,27 +44,53 @@ static int save_trace(struct stackframe *frame, void *d)
 {
         struct stack_trace_data *data = d;
         struct stack_trace *trace = data->trace;
+        unsigned long addr = frame->lr;
 
+        if (data->no_sched_functions && in_sched_functions(addr))
+                return 0;
         if (data->skip) {
                 data->skip--;
                 return 0;
         }
 
-        trace->entries[trace->nr_entries++] = frame->lr;
+        trace->entries[trace->nr_entries++] = addr;
 
         return trace->nr_entries >= trace->max_entries;
 }
 
-void save_stack_trace(struct stack_trace *trace)
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
         struct stack_trace_data data;
         unsigned long fp, base;
 
         data.trace = trace;
         data.skip = trace->skip;
-        base = (unsigned long)task_stack_page(current);
-        asm("mov %0, fp" : "=r" (fp));
+        base = (unsigned long)task_stack_page(tsk);
+
+        if (tsk != current) {
+#ifdef CONFIG_SMP
+                /*
+                 * What guarantees do we have here that 'tsk'
+                 * is not running on another CPU?
+                 */
+                BUG();
+#else
+                data.no_sched_functions = 1;
+                fp = thread_saved_fp(tsk);
+#endif
+        } else {
+                data.no_sched_functions = 0;
+                asm("mov %0, fp" : "=r" (fp));
+        }
 
         walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
+        if (trace->nr_entries < trace->max_entries)
+                trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+
+void save_stack_trace(struct stack_trace *trace)
+{
+        save_stack_trace_tsk(current, trace);
 }
+EXPORT_SYMBOL_GPL(save_stack_trace);
 #endif
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index b5867eca1d0b..368d171754cf 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -130,7 +130,9 @@ static const struct leds_evt_name evt_names[] = {
         { "red",   led_red_on,   led_red_off   },
 };
 
-static ssize_t leds_store(struct sys_device *dev, const char *buf, size_t size)
+static ssize_t leds_store(struct sys_device *dev,
+                        struct sysdev_attribute *attr,
+                        const char *buf, size_t size)
 {
         int ret = -EINVAL, len = strcspn(buf, " ");
 
@@ -365,108 +367,6 @@ static struct sysdev_class timer_sysclass = {
         .resume         = timer_resume,
 };
 
-#ifdef CONFIG_NO_IDLE_HZ
-static int timer_dyn_tick_enable(void)
-{
-        struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
-        unsigned long flags;
-        int ret = -ENODEV;
-
-        if (dyn_tick) {
-                spin_lock_irqsave(&dyn_tick->lock, flags);
-                ret = 0;
-                if (!(dyn_tick->state & DYN_TICK_ENABLED)) {
-                        ret = dyn_tick->enable();
-
-                        if (ret == 0)
-                                dyn_tick->state |= DYN_TICK_ENABLED;
-                }
-                spin_unlock_irqrestore(&dyn_tick->lock, flags);
-        }
-
-        return ret;
-}
-
-static int timer_dyn_tick_disable(void)
-{
-        struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
-        unsigned long flags;
-        int ret = -ENODEV;
-
-        if (dyn_tick) {
-                spin_lock_irqsave(&dyn_tick->lock, flags);
-                ret = 0;
-                if (dyn_tick->state & DYN_TICK_ENABLED) {
-                        ret = dyn_tick->disable();
-
-                        if (ret == 0)
-                                dyn_tick->state &= ~DYN_TICK_ENABLED;
-                }
-                spin_unlock_irqrestore(&dyn_tick->lock, flags);
-        }
-
-        return ret;
-}
-
-/*
- * Reprogram the system timer for at least the calculated time interval.
- * This function should be called from the idle thread with IRQs disabled,
- * immediately before sleeping.
- */
-void timer_dyn_reprogram(void)
-{
-        struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
-        unsigned long next, seq, flags;
-
-        if (!dyn_tick)
-                return;
-
-        spin_lock_irqsave(&dyn_tick->lock, flags);
-        if (dyn_tick->state & DYN_TICK_ENABLED) {
-                next = next_timer_interrupt();
-                do {
-                        seq = read_seqbegin(&xtime_lock);
-                        dyn_tick->reprogram(next - jiffies);
-                } while (read_seqretry(&xtime_lock, seq));
-        }
-        spin_unlock_irqrestore(&dyn_tick->lock, flags);
-}
-
-static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf)
-{
-        return sprintf(buf, "%i\n",
-                       (system_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1);
-}
-
-static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf,
-                                  size_t count)
-{
-        unsigned int enable = simple_strtoul(buf, NULL, 2);
-
-        if (enable)
-                timer_dyn_tick_enable();
-        else
-                timer_dyn_tick_disable();
-
-        return count;
-}
-static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick);
-
-/*
- * dyntick=enable|disable
- */
-static char dyntick_str[4] __initdata = "";
-
-static int __init dyntick_setup(char *str)
-{
-        if (str)
-                strlcpy(dyntick_str, str, sizeof(dyntick_str));
-        return 1;
-}
-
-__setup("dyntick=", dyntick_setup);
-#endif
-
 static int __init timer_init_sysfs(void)
 {
         int ret = sysdev_class_register(&timer_sysclass);
@@ -475,19 +375,6 @@ static int __init timer_init_sysfs(void)
                 ret = sysdev_register(&system_timer->dev);
         }
 
-#ifdef CONFIG_NO_IDLE_HZ
-        if (ret == 0 && system_timer->dyn_tick) {
-                ret = sysdev_create_file(&system_timer->dev, &attr_dyn_tick);
-
-                /*
-                 * Turn on dynamic tick after calibrate delay
-                 * for correct bogomips
-                 */
-                if (ret == 0 && dyntick_str[0] == 'e')
-                        ret = timer_dyn_tick_enable();
-        }
-#endif
-
         return ret;
 }
 
@@ -500,10 +387,5 @@ void __init time_init(void)
                 system_timer->offset = dummy_gettimeoffset;
 #endif
         system_timer->init();
-
-#ifdef CONFIG_NO_IDLE_HZ
-        if (system_timer->dyn_tick)
-                spin_lock_init(&system_timer->dyn_tick->lock);
-#endif
 }
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 5595fdd75e82..7277aef83098 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -708,6 +708,11 @@ EXPORT_SYMBOL(abort);
 
 void __init trap_init(void)
 {
+        return;
+}
+
+void __init early_trap_init(void)
+{
         unsigned long vectors = CONFIG_VECTORS_BASE;
         extern char __stubs_start[], __stubs_end[];
         extern char __vectors_start[], __vectors_end[];
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index cab355c0c1f7..139cce646055 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -13,14 +13,6 @@
  */
 
 /*
- * This can be used to enable code to cacheline align the source pointer.
- * Experiments on tested architectures (StrongARM and XScale) didn't show
- * this a worthwhile thing to do.  That might be different in the future.
- */
-//#define CALGN(code...)        code
-#define CALGN(code...)
-
-/*
  * Theory of operation
  * -------------------
  *
@@ -82,7 +74,7 @@
                 stmfd   sp!, {r5 - r8}
                 blt     5f
 
-        CALGN(  ands    ip, r1, #31             )
+        CALGN(  ands    ip, r0, #31             )
         CALGN(  rsb     r3, ip, #32             )
         CALGN(  sbcnes  r4, r3, r2              )  @ C is always set here
         CALGN(  bcs     2f                      )
@@ -168,7 +160,7 @@
                 subs    r2, r2, #28
                 blt     14f
 
-        CALGN(  ands    ip, r1, #31             )
+        CALGN(  ands    ip, r0, #31             )
         CALGN(  rsb     ip, ip, #32             )
         CALGN(  sbcnes  r4, ip, r2              )  @ C is always set here
         CALGN(  subcc   r2, r2, ip              )
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index ef7fddc14ac9..2e301b7bd8f1 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -13,14 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-/*
- * This can be used to enable code to cacheline align the source pointer.
- * Experiments on tested architectures (StrongARM and XScale) didn't show
- * this a worthwhile thing to do.  That might be different in the future.
- */
-//#define CALGN(code...)        code
-#define CALGN(code...)
-
                 .text
 
 /*
@@ -55,11 +47,12 @@ ENTRY(memmove)
                 stmfd   sp!, {r5 - r8}
                 blt     5f
 
-        CALGN(  ands    ip, r1, #31             )
+        CALGN(  ands    ip, r0, #31             )
         CALGN(  sbcnes  r4, ip, r2              )  @ C is always set here
         CALGN(  bcs     2f                      )
         CALGN(  adr     r4, 6f                  )
         CALGN(  subs    r2, r2, ip              )  @ C is set here
+        CALGN(  rsb     ip, ip, #32             )
         CALGN(  add     pc, r4, ip              )
 
         PLD(    pld     [r1, #-4]               )
@@ -138,8 +131,7 @@ ENTRY(memmove)
                 subs    r2, r2, #28
                 blt     14f
 
-        CALGN(  ands    ip, r1, #31             )
-        CALGN(  rsb     ip, ip, #32             )
+        CALGN(  ands    ip, r0, #31             )
         CALGN(  sbcnes  r4, ip, r2              )  @ C is always set here
         CALGN(  subcc   r2, r2, ip              )
         CALGN(  bcc     15f                     )
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index 95b110b07a89..b477d4ac88ef 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -39,6 +39,9 @@ ENTRY(memset)
         mov     r3, r1
         cmp     r2, #16
         blt     4f
+
+#if ! CALGN(1)+0
+
 /*
  * We need an extra register for this loop - save the return address and
  * use the LR
@@ -64,6 +67,49 @@ ENTRY(memset)
         stmneia r0!, {r1, r3, ip, lr}
         ldr     lr, [sp], #4
 
+#else
+
+/*
+ * This version aligns the destination pointer in order to write
+ * whole cache lines at once.
+ */
+
+        stmfd   sp!, {r4-r7, lr}
+        mov     r4, r1
+        mov     r5, r1
+        mov     r6, r1
+        mov     r7, r1
+        mov     ip, r1
+        mov     lr, r1
+
+        cmp     r2, #96
+        tstgt   r0, #31
+        ble     3f
+
+        and     ip, r0, #31
+        rsb     ip, ip, #32
+        sub     r2, r2, ip
+        movs    ip, ip, lsl #(32 - 4)
+        stmcsia r0!, {r4, r5, r6, r7}
+        stmmiia r0!, {r4, r5}
+        tst     ip, #(1 << 30)
+        mov     ip, r1
+        strne   r1, [r0], #4
+
+3:      subs    r2, r2, #64
+        stmgeia r0!, {r1, r3-r7, ip, lr}
+        stmgeia r0!, {r1, r3-r7, ip, lr}
+        bgt     3b
+        ldmeqfd sp!, {r4-r7, pc}
+
+        tst     r2, #32
+        stmneia r0!, {r1, r3-r7, ip, lr}
+        tst     r2, #16
+        stmneia r0!, {r4-r7}
+        ldmfd   sp!, {r4-r7, lr}
+
+#endif
+
 4:      tst     r2, #8
         stmneia r0!, {r1, r3}
         tst     r2, #4
diff --git a/arch/arm/lib/memzero.S b/arch/arm/lib/memzero.S
index abf2508e8221..b8f79d80ee9b 100644
--- a/arch/arm/lib/memzero.S
+++ b/arch/arm/lib/memzero.S
@@ -39,6 +39,9 @@ ENTRY(__memzero)
  */
         cmp     r1, #16                 @ 1 we can skip this chunk if we
         blt     4f                      @ 1 have < 16 bytes
+
+#if ! CALGN(1)+0
+
 /*
  * We need an extra register for this loop - save the return address and
  * use the LR
@@ -64,6 +67,47 @@ ENTRY(__memzero)
         stmneia r0!, {r2, r3, ip, lr}   @ 4
         ldr     lr, [sp], #4            @ 1
 
+#else
+
+/*
+ * This version aligns the destination pointer in order to write
+ * whole cache lines at once.
+ */
+
+        stmfd   sp!, {r4-r7, lr}
+        mov     r4, r2
+        mov     r5, r2
+        mov     r6, r2
+        mov     r7, r2
+        mov     ip, r2
+        mov     lr, r2
+
+        cmp     r1, #96
+        andgts  ip, r0, #31
+        ble     3f
+
+        rsb     ip, ip, #32
+        sub     r1, r1, ip
+        movs    ip, ip, lsl #(32 - 4)
+        stmcsia r0!, {r4, r5, r6, r7}
+        stmmiia r0!, {r4, r5}
+        movs    ip, ip, lsl #2
+        strcs   r2, [r0], #4
+
+3:      subs    r1, r1, #64
+        stmgeia r0!, {r2-r7, ip, lr}
+        stmgeia r0!, {r2-r7, ip, lr}
+        bgt     3b
+        ldmeqfd sp!, {r4-r7, pc}
+
+        tst     r1, #32
+        stmneia r0!, {r2-r7, ip, lr}
+        tst     r1, #16
+        stmneia r0!, {r4-r7}
+        ldmfd   sp!, {r4-r7, lr}
+
+#endif
+
 4:      tst     r1, #8                  @ 1 8 bytes or more?
         stmneia r0!, {r2, r3}           @ 2
         tst     r1, #4                  @ 1 4 bytes or more?
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0fc07b6db749..5bad6b9b00d7 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -30,6 +30,11 @@ config ARCH_AT91SAM9RL
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G20
+        bool "AT91SAM9G20"
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91CAP9
         bool "AT91CAP9"
         select GENERIC_TIME
@@ -126,6 +131,12 @@ config MACH_ECBAT91
           Select this if you are using emQbit's ECB_AT91 board.
           <http://wiki.emqbit.com/free-ecb-at91>
 
+config MACH_YL9200
+        bool "ucDragon YL-9200"
+        depends on ARCH_AT91RM9200
+        help
+          Select this if you are using the ucDragon YL-9200 board.
+
 endif
 
 # ----------------------------------------------------------
@@ -164,6 +175,20 @@ config MACH_SAM9_L9260
           Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
           <http://www.olimex.com/dev/sam9-L9260.html>
 
+config MACH_USB_A9260
+        bool "CALAO USB-A9260"
+        depends on ARCH_AT91SAM9260
+        help
+          Select this if you are using a Calao Systems USB-A9260.
+          <http://www.calao-systems.com>
+
+config MACH_QIL_A9260
+        bool "CALAO QIL-A9260 board"
+        depends on ARCH_AT91SAM9260
+        help
+          Select this if you are using a Calao Systems QIL-A9260 Board.
+          <http://www.calao-systems.com>
+
 endif
 
 # ----------------------------------------------------------
@@ -194,6 +219,13 @@ config MACH_AT91SAM9263EK
           Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
 
+config MACH_USB_A9263
+        bool "CALAO USB-A9263"
+        depends on ARCH_AT91SAM9263
+        help
+          Select this if you are using a Calao Systems USB-A9263.
+          <http://www.calao-systems.com>
+
 endif
 
 # ----------------------------------------------------------
@@ -212,6 +244,20 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G20
+
+comment "AT91SAM9G20 Board Type"
+
+config MACH_AT91SAM9G20EK
+        bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+        depends on ARCH_AT91SAM9G20
+        help
+          Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91CAP9
 
 comment "AT91CAP9 Board Type"
@@ -247,13 +293,13 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
         bool "Enable DataFlash Card support"
-        depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_SAM9_L9260 || MACH_ECBAT91)
+        depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK)
         help
           Enable support for the DataFlash card.
 
 config MTD_NAND_AT91_BUSWIDTH_16
         bool "Enable 16-bit data bus interface to NAND flash"
-        depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
+        depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
         help
           On AT91SAM926x boards both types of NAND flash can be present
           (8 and 16 bit data bus width).
@@ -302,15 +348,15 @@ config AT91_EARLY_USART2
 
 config AT91_EARLY_USART3
         bool "USART3"
-        depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260)
+        depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
 
 config AT91_EARLY_USART4
         bool "USART4"
-        depends on ARCH_AT91SAM9260
+        depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
 
 config AT91_EARLY_USART5
         bool "USART5"
-        depends on ARCH_AT91SAM9260
+        depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
 
 endchoice
 
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 8d9bc0153b18..7d641f97516b 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_d
 obj-$(CONFIG_ARCH_AT91SAM9261)  += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9263)  += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)   += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G20)  += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91CAP9)     += at91cap9.o at91sam926x_time.o at91cap9_devices.o
 obj-$(CONFIG_ARCH_AT91X40)      += at91x40.o at91x40_time.o
 
@@ -30,21 +31,28 @@ obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
 obj-$(CONFIG_MACH_KAFA)         += board-kafa.o
 obj-$(CONFIG_MACH_PICOTUX2XX)   += board-picotux200.o
 obj-$(CONFIG_MACH_ECBAT91)      += board-ecbat91.o
+obj-$(CONFIG_MACH_YL9200)       += board-yl-9200.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
 obj-$(CONFIG_MACH_CAM60)        += board-cam60.o
 obj-$(CONFIG_MACH_SAM9_L9260)   += board-sam9-l9260.o
+obj-$(CONFIG_MACH_USB_A9260)    += board-usb-a9260.o
+obj-$(CONFIG_MACH_QIL_A9260)    += board-qil-a9260.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
 
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+obj-$(CONFIG_MACH_USB_A9263)    += board-usb-a9263.o
 
 # AT91SAM9RL board-specific support
 obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
 
+# AT91SAM9G20 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)  += board-cap9adk.o
 
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index fe5148e9f0cc..dc8b40783d94 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -84,6 +84,105 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
 
 
 /* --------------------------------------------------------------------
+ *  USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+
+static struct resource usba_udc_resources[] = {
+        [0] = {
+                .start  = AT91CAP9_UDPHS_FIFO,
+                .end    = AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91CAP9_BASE_UDPHS,
+                .end    = AT91CAP9_BASE_UDPHS + SZ_1K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [2] = {
+                .start  = AT91CAP9_ID_UDPHS,
+                .end    = AT91CAP9_ID_UDPHS,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)                  \
+        [idx] = {                                               \
+                .name           = nam,                          \
+                .index          = idx,                          \
+                .fifo_size      = maxpkt,                       \
+                .nr_banks       = maxbk,                        \
+                .can_dma        = dma,                          \
+                .can_isoc       = isoc,                         \
+        }
+
+static struct usba_ep_data usba_udc_ep[] = {
+        EP("ep0", 0,   64, 1, 0, 0),
+        EP("ep1", 1, 1024, 3, 1, 1),
+        EP("ep2", 2, 1024, 3, 1, 1),
+        EP("ep3", 3, 1024, 2, 1, 1),
+        EP("ep4", 4, 1024, 2, 1, 1),
+        EP("ep5", 5, 1024, 2, 1, 0),
+        EP("ep6", 6, 1024, 2, 1, 0),
+        EP("ep7", 7, 1024, 2, 0, 0),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+        struct usba_platform_data pdata;
+        struct usba_ep_data ep[8];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+        .name           = "atmel_usba_udc",
+        .id             = -1,
+        .dev            = {
+                                .platform_data  = &usba_udc_data.pdata,
+        },
+        .resource       = usba_udc_resources,
+        .num_resources  = ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+        at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
+                                          AT91_MATRIX_UDPHS_BYPASS_LOCK);
+
+        /*
+         * Invalid pins are 0 on AT91, but the usba driver is shared
+         * with AVR32, which use negative values instead. Once/if
+         * gpio_is_valid() is ported to AT91, revisit this code.
+         */
+        usba_udc_data.pdata.vbus_pin = -EINVAL;
+        usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+        memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+        if (data && data->vbus_pin > 0) {
+                at91_set_gpio_input(data->vbus_pin, 0);
+                at91_set_deglitch(data->vbus_pin, 1);
+                usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+        }
+
+        /* Pullup pin is handled internally by USB device peripheral */
+
+        /* Clocks */
+        at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+        at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+        platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  Ethernet
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index ee26550cdc21..380f12a12200 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -47,6 +47,20 @@ static struct map_desc at91sam9260_sram_desc[] __initdata = {
         }
 };
 
+static struct map_desc at91sam9g20_sram_desc[] __initdata = {
+        {
+                .virtual        = AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE,
+                .pfn            = __phys_to_pfn(AT91SAM9G20_SRAM0_BASE),
+                .length         = AT91SAM9G20_SRAM0_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE - AT91SAM9G20_SRAM1_SIZE,
+                .pfn            = __phys_to_pfn(AT91SAM9G20_SRAM1_BASE),
+                .length         = AT91SAM9G20_SRAM1_SIZE,
+                .type           = MT_DEVICE,
+        }
+};
+
 static struct map_desc at91sam9xe_sram_desc[] __initdata = {
         {
                 .pfn            = __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
@@ -307,6 +321,8 @@ void __init at91sam9260_initialize(unsigned long main_clock)
 
         if (cpu_is_at91sam9xe())
                 at91sam9xe_initialize();
+        else if (cpu_is_at91sam9g20())
+                iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc));
         else
                 iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
 
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 3aa62b1151b8..cae5f52f1278 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -18,6 +18,7 @@
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91sam9260_matrix.h>
 #include <asm/arch/at91sam9_smc.h>
@@ -320,20 +321,41 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         csa = at91_sys_read(AT91_MATRIX_EBICSA);
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
-        /* set the bus interface characteristics */
-        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-                        | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+        if (cpu_is_at91sam9260()) {
+                /* Timing for sam9260 */
+                /* set the bus interface characteristics */
+                at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+                                | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
 
-        at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
-                        | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+                at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+                                | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
 
-        at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+                at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
 
-        if (data->bus_width_16)
-                mode = AT91_SMC_DBW_16;
-        else
-                mode = AT91_SMC_DBW_8;
-        at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+                if (data->bus_width_16)
+                        mode = AT91_SMC_DBW_16;
+                else
+                        mode = AT91_SMC_DBW_8;
+                at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+        }
+
+        if (cpu_is_at91sam9g20()) {
+                /* Timing for sam9g20 */
+                /* set the bus interface characteristics */
+                at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0)
+                                | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+
+                at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(4)
+                                | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(4));
+
+                at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+                if (data->bus_width_16)
+                        mode = AT91_SMC_DBW_16;
+                else
+                        mode = AT91_SMC_DBW_8;
+                at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(3));
+        }
 
         /* enable pin */
         if (data->enable_pin)
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 247e8e7cebea..483d436af22d 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -232,19 +232,19 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
         /* set the bus interface characteristics */
-        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-                        | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+                        | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
 
-        at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
-                        | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+        at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+                        | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
 
-        at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+        at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
 
         if (data->bus_width_16)
                 mode = AT91_SMC_DBW_16;
         else
                 mode = AT91_SMC_DBW_8;
-        at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+        at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
 
         /* enable pin */
         if (data->enable_pin)
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index f1dfbfe094a2..9762b15f658a 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -391,8 +391,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
 
         /* set the bus interface characteristics */
-        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-                        | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+                        | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
 
         at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
                         | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 9945cd25d0ab..5f3094870cad 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -26,6 +26,101 @@
 
 
 /* --------------------------------------------------------------------
+ *  USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+
+static struct resource usba_udc_resources[] = {
+        [0] = {
+                .start  = AT91SAM9RL_UDPHS_FIFO,
+                .end    = AT91SAM9RL_UDPHS_FIFO + SZ_512K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9RL_BASE_UDPHS,
+                .end    = AT91SAM9RL_BASE_UDPHS + SZ_1K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [2] = {
+                .start  = AT91SAM9RL_ID_UDPHS,
+                .end    = AT91SAM9RL_ID_UDPHS,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)                  \
+        [idx] = {                                               \
+                .name           = nam,                          \
+                .index          = idx,                          \
+                .fifo_size      = maxpkt,                       \
+                .nr_banks       = maxbk,                        \
+                .can_dma        = dma,                          \
+                .can_isoc       = isoc,                         \
+        }
+
+static struct usba_ep_data usba_udc_ep[] __initdata = {
+        EP("ep0", 0, 64, 1, 0, 0),
+        EP("ep1", 1, 1024, 2, 1, 1),
+        EP("ep2", 2, 1024, 2, 1, 1),
+        EP("ep3", 3, 1024, 3, 1, 0),
+        EP("ep4", 4, 1024, 3, 1, 0),
+        EP("ep5", 5, 1024, 3, 1, 1),
+        EP("ep6", 6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+        struct usba_platform_data pdata;
+        struct usba_ep_data ep[7];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+        .name           = "atmel_usba_udc",
+        .id             = -1,
+        .dev            = {
+                                .platform_data  = &usba_udc_data.pdata,
+        },
+        .resource       = usba_udc_resources,
+        .num_resources  = ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+        /*
+         * Invalid pins are 0 on AT91, but the usba driver is shared
+         * with AVR32, which use negative values instead. Once/if
+         * gpio_is_valid() is ported to AT91, revisit this code.
+         */
+        usba_udc_data.pdata.vbus_pin = -EINVAL;
+        usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+        memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+        if (data && data->vbus_pin > 0) {
+                at91_set_gpio_input(data->vbus_pin, 0);
+                at91_set_deglitch(data->vbus_pin, 1);
+                usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+        }
+
+        /* Pullup pin is handled internally by USB device peripheral */
+
+        /* Clocks */
+        at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+        at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+        platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
@@ -138,15 +233,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
         /* set the bus interface characteristics */
-        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-                        | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+                        | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
 
-        at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
-                        | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+        at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+                        | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
 
-        at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+        at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
 
-        at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+        at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
 
         /* enable pin */
         if (data->enable_pin)
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 7144e1a89a2a..a1c41d7c0be9 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -78,6 +78,12 @@ static struct at91_usbh_data __initdata cap9adk_usbh_data = {
         .ports          = 2,
 };
 
+/*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata cap9adk_usba_udc_data = {
+        .vbus_pin       = AT91_PIN_PB31,
+};
 
 /*
  * ADS7846 Touchscreen
@@ -326,6 +332,9 @@ static void __init cap9adk_board_init(void)
         /* USB Host */
         set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
         at91_add_device_usbh(&cap9adk_usbh_data);
+        /* USB HS */
+        set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH);
+        at91_add_device_usba(&cap9adk_usba_udc_data);
         /* SPI */
         at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
         /* Touchscreen */
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 0f0878294a67..9854fc3dd1f2 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -40,24 +40,21 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata carmeva_uart_config = {
-        .console_tty    = 0,                            /* ttyS0 */
-        .nr_tty         = 2,
-        .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
-};
-
 static void __init carmeva_map_io(void)
 {
         /* Initialize processor: 20.000 MHz crystal */
         at91rm9200_initialize(20000000, AT91RM9200_BGA);
 
-        /* Setup the serial ports and console */
-        at91_init_serial(&carmeva_uart_config);
+        /* DBGU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+
+        /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+        at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                           | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+                           | ATMEL_UART_RI);
+
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
 }
 
 static void __init carmeva_init_irq(void)
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 419fd19b620b..bb1a5474ddab 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -45,10 +45,10 @@ static void __init csb637_map_io(void)
         /* Initialize processor: 3.6864 MHz crystal */
         at91rm9200_initialize(3686400, AT91RM9200_BGA);
 
-        /* DBGU on ttyS0 */
+        /* DBGU on ttyS0. (Rx & Tx only) */
         at91_register_uart(0, 0, 0);
 
-        /* make console=ttyS0 the default */
+        /* make console=ttyS0 (ie, DBGU) the default */
         at91_set_serial_console(0);
 }
 
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index ffecacb71f89..02a70b2f355b 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -45,17 +45,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata dk_uart_config = {
-        .console_tty    = 0,                            /* ttyS0 */
-        .nr_tty         = 2,
-        .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
-};
-
 static void __init dk_map_io(void)
 {
         /* Initialize processor: 18.432 MHz crystal */
@@ -64,8 +53,16 @@ static void __init dk_map_io(void)
         /* Setup the LEDs */
         at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
 
-        /* Setup the serial ports and console */
-        at91_init_serial(&dk_uart_config);
+        /* DBGU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+
+        /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+        at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                           | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+                           | ATMEL_UART_RI);
+
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
 }
 
 static void __init dk_init_irq(void)
@@ -163,7 +160,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
 #define DK_FLASH_SIZE   0x200000
 
 static struct physmap_flash_data dk_flash_data = {
-        .width  = 2,
+        .width          = 2,
 };
 
 static struct resource dk_flash_resource = {
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index af1a1d8ecc30..3fe054e0056b 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -40,24 +40,24 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata eb9200_uart_config = {
-        .console_tty    = 0,                            /* ttyS0 */
-        .nr_tty         = 2,
-        .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
-};
-
 static void __init eb9200_map_io(void)
 {
         /* Initialize processor: 18.432 MHz crystal */
         at91rm9200_initialize(18432000, AT91RM9200_BGA);
 
-        /* Setup the serial ports and console */
-        at91_init_serial(&eb9200_uart_config);
+        /* DBGU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+
+        /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+        at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                        | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+                        | ATMEL_UART_RI);
+
+        /* USART2 on ttyS2. (Rx, Tx) - IRDA */
+        at91_register_uart(AT91RM9200_ID_US2, 2, 0);
+
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
 }
 
 static void __init eb9200_init_irq(void)
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 0574e50a30dd..74aa4325eab3 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -45,17 +45,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
-        .console_tty    = 0,                            /* ttyS0 */
-        .nr_tty         = 2,
-        .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
-};
-
 static void __init ek_map_io(void)
 {
         /* Initialize processor: 18.432 MHz crystal */
@@ -64,8 +53,16 @@ static void __init ek_map_io(void)
         /* Setup the LEDs */
         at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
 
-        /* Setup the serial ports and console */
-        at91_init_serial(&ek_uart_config);
+        /* DBGU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+
+        /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+        at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                           | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+                           | ATMEL_UART_RI);
+
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
 }
 
 static void __init ek_init_irq(void)
@@ -122,7 +119,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 #define EK_FLASH_SIZE   0x200000
 
 static struct physmap_flash_data ek_flash_data = {
-        .width  = 2,
+        .width          = 2,
 };
 
 static struct resource ek_flash_resource = {
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 153450f168f2..082ed59365a4 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -37,19 +37,10 @@
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
-#include "generic.h"
+#include <asm/arch/at91rm9200_mc.h>
 
+#include "generic.h"
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata kb9202_uart_config = {
-        .console_tty    = 0,                                    /* ttyS0 */
-        .nr_tty         = 3,
-        .tty_map        = { 4, 0, 1, -1, -1 }                   /* ttyS0, ..., ttyS4 */
-};
 
 static void __init kb9202_map_io(void)
 {
@@ -59,8 +50,20 @@ static void __init kb9202_map_io(void)
         /* Set up the LEDs */
         at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
 
-        /* Setup the serial ports and console */
-        at91_init_serial(&kb9202_uart_config);
+        /* DBGU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+
+        /* USART0 on ttyS1 (Rx & Tx only) */
+        at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+
+        /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
+        at91_register_uart(AT91RM9200_ID_US1, 2, 0);
+
+        /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
+        at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
 }
 
 static void __init kb9202_init_irq(void)
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
new file mode 100644
index 000000000000..99b4ec3818d6
--- /dev/null
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -0,0 +1,255 @@
+/*
+ * linux/arch/arm/mach-at91/board-qil-a9260.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *  Copyright (C) 2007 Calao-systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_shdwc.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+        /* Initialize processor: 12.000 MHz crystal */
+        at91sam9260_initialize(12000000);
+
+        /* DGBU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+
+        /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+        at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                           | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+                           | ATMEL_UART_RI);
+
+        /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+        at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+        /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+        at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+        /* set serial console to ttyS1 (ie, USART0) */
+        at91_set_serial_console(1);
+
+}
+
+static void __init ek_init_irq(void)
+{
+        at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+        .ports          = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+        .vbus_pin       = AT91_PIN_PC5,
+        .pullup_pin     = 0,            /* pull-up driven by UDC */
+};
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if defined(CONFIG_RTC_DRV_M41T94)
+        {       /* M41T94 RTC */
+                .modalias       = "m41t94",
+                .chip_select    = 0,
+                .max_speed_hz   = 1 * 1000 * 1000,
+                .bus_num        = 0,
+        }
+#endif
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+        .phy_irq_pin    = AT91_PIN_PA31,
+        .is_rmii        = 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+        {
+                .name   = "Uboot & Kernel",
+                .offset = 0x00000000,
+                .size   = 16 * 1024 * 1024,
+        },
+        {
+                .name   = "Root FS",
+                .offset = 0x01000000,
+                .size   = 120 * 1024 * 1024,
+        },
+        {
+                .name   = "FS",
+                .offset = 0x08800000,
+                .size   = 120 * 1024 * 1024,
+        },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+        *num_partitions = ARRAY_SIZE(ek_nand_partition);
+        return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+        .ale            = 21,
+        .cle            = 22,
+//      .det_pin        = ... not connected
+        .rdy_pin        = AT91_PIN_PC13,
+        .enable_pin     = AT91_PIN_PC14,
+        .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+        .bus_width_16   = 1,
+#else
+        .bus_width_16   = 0,
+#endif
+};
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+        .slot_b         = 0,
+        .wire4          = 1,
+//      .det_pin        = ... not connected
+//      .wp_pin         = ... not connected
+//      .vcc_pin        = ... not connected
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+        {       /* USER PUSH BUTTON */
+                .code           = KEY_ENTER,
+                .gpio           = AT91_PIN_PB10,
+                .active_low     = 1,
+                .desc           = "user_pb",
+                .wakeup         = 1,
+        }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+        .buttons        = ek_buttons,
+        .nbuttons       = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .num_resources  = 0,
+        .dev            = {
+                .platform_data  = &ek_button_data,
+        }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+        at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
+        at91_set_deglitch(AT91_PIN_PB10, 1);
+
+        platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+        {       /* user_led (green) */
+                .name                   = "user_led",
+                .gpio                   = AT91_PIN_PB21,
+                .active_low             = 0,
+                .default_trigger        = "heartbeat",
+        }
+};
+
+static void __init ek_board_init(void)
+{
+        /* Serial */
+        at91_add_device_serial();
+        /* USB Host */
+        at91_add_device_usbh(&ek_usbh_data);
+        /* USB Device */
+        at91_add_device_udc(&ek_udc_data);
+        /* SPI */
+        at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+        /* NAND */
+        at91_add_device_nand(&ek_nand_data);
+        /* I2C */
+        at91_add_device_i2c(NULL, 0);
+        /* Ethernet */
+        at91_add_device_eth(&ek_macb_data);
+        /* MMC */
+        at91_add_device_mmc(0, &ek_mmc_data);
+        /* Push Buttons */
+        ek_add_device_buttons();
+        /* LEDs */
+        at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+        /* shutdown controller, wakeup button (5 msec low) */
+        at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+                                | AT91_SHDW_RTTWKEN);
+}
+
+MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
+        /* Maintainer: calao-systems */
+        .phys_io        = AT91_BASE_SYS,
+        .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+        .boot_params    = AT91_SDRAM_BASE + 0x100,
+        .timer          = &at91sam926x_timer,
+        .map_io         = ek_map_io,
+        .init_irq       = ek_init_irq,
+        .init_machine   = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
new file mode 100644
index 000000000000..45617c201240
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -0,0 +1,218 @@
+/*
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2008 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/at73c213.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+        /* Initialize processor: 18.432 MHz crystal */
+        at91sam9260_initialize(18432000);
+
+        /* DGBU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+
+        /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+        at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                           | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+                           | ATMEL_UART_RI);
+
+        /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+        at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+        at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+        .ports          = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+        .vbus_pin       = AT91_PIN_PC5,
+        .pullup_pin     = 0,            /* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+        {       /* DataFlash chip */
+                .modalias       = "mtd_dataflash",
+                .chip_select    = 1,
+                .max_speed_hz   = 15 * 1000 * 1000,
+                .bus_num        = 0,
+        },
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+        {       /* DataFlash card */
+                .modalias       = "mtd_dataflash",
+                .chip_select    = 0,
+                .max_speed_hz   = 15 * 1000 * 1000,
+                .bus_num        = 0,
+        },
+#endif
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+        .phy_irq_pin    = AT91_PIN_PA7,
+        .is_rmii        = 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+        {
+                .name   = "Bootstrap",
+                .offset = 0,
+                .size   = 4 * 1024 * 1024,
+        },
+        {
+                .name   = "Partition 1",
+                .offset = 4 * 1024 * 1024,
+                .size   = 60 * 1024 * 1024,
+        },
+        {
+                .name   = "Partition 2",
+                .offset = 64 * 1024 * 1024,
+                .size   = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+        *num_partitions = ARRAY_SIZE(ek_nand_partition);
+        return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct at91_nand_data __initdata ek_nand_data = {
+        .ale            = 21,
+        .cle            = 22,
+        .rdy_pin        = AT91_PIN_PC13,
+        .enable_pin     = AT91_PIN_PC14,
+        .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+        .bus_width_16   = 1,
+#else
+        .bus_width_16   = 0,
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ * det_pin, wp_pin and vcc_pin are not connected
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+        .slot_b         = 1,
+        .wire4          = 1,
+};
+
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+        {       /* "bottom" led, green, userled1 to be defined */
+                .name                   = "ds5",
+                .gpio                   = AT91_PIN_PA6,
+                .active_low             = 1,
+                .default_trigger        = "none",
+        },
+        {       /* "power" led, yellow */
+                .name                   = "ds1",
+                .gpio                   = AT91_PIN_PA9,
+                .default_trigger        = "heartbeat",
+        }
+};
+
+static void __init ek_board_init(void)
+{
+        /* Serial */
+        at91_add_device_serial();
+        /* USB Host */
+        at91_add_device_usbh(&ek_usbh_data);
+        /* USB Device */
+        at91_add_device_udc(&ek_udc_data);
+        /* SPI */
+        at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+        /* NAND */
+        at91_add_device_nand(&ek_nand_data);
+        /* Ethernet */
+        at91_add_device_eth(&ek_macb_data);
+        /* MMC */
+        at91_add_device_mmc(0, &ek_mmc_data);
+        /* I2C */
+        at91_add_device_i2c(NULL, 0);
+        /* LEDs */
+        at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+}
+
+MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
+        /* Maintainer: Atmel */
+        .phys_io        = AT91_BASE_SYS,
+        .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+        .boot_params    = AT91_SDRAM_BASE + 0x100,
+        .timer          = &at91sam926x_timer,
+        .map_io         = ek_map_io,
+        .init_irq       = ek_init_irq,
+        .init_machine   = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e69e51f376..66e77bb2e079 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -56,6 +56,14 @@ static void __init ek_init_irq(void)
 
 
 /*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata ek_usba_udc_data = {
+        .vbus_pin       = AT91_PIN_PA8,
+};
+
+
+/*
  * MCI (SD/MMC)
  */
 static struct at91_mmc_data __initdata ek_mmc_data = {
@@ -175,6 +183,8 @@ static void __init ek_board_init(void)
 {
         /* Serial */
         at91_add_device_serial();
+        /* USB HS */
+        at91_add_device_usba(&ek_usba_udc_data);
         /* I2C */
         at91_add_device_i2c(NULL, 0);
         /* NAND */
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
new file mode 100644
index 000000000000..837aedf8ffeb
--- /dev/null
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -0,0 +1,215 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a9260.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *  Copyright (C) 2007 Calao-systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_shdwc.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+        /* Initialize processor: 12.000 MHz crystal */
+        at91sam9260_initialize(12000000);
+
+        /* DGBU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+        at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+        .ports          = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+        .vbus_pin       = AT91_PIN_PC5,
+        .pullup_pin     = 0,            /* pull-up driven by UDC */
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+        .phy_irq_pin    = AT91_PIN_PA31,
+        .is_rmii        = 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+        {
+                .name   = "Uboot & Kernel",
+                .offset = 0x00000000,
+                .size   = 16 * 1024 * 1024,
+        },
+        {
+                .name   = "Root FS",
+                .offset = 0x01000000,
+                .size   = 120 * 1024 * 1024,
+        },
+        {
+                .name   = "FS",
+                .offset = 0x08800000,
+                .size   = 120 * 1024 * 1024,
+        }
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+        *num_partitions = ARRAY_SIZE(ek_nand_partition);
+        return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+        .ale            = 21,
+        .cle            = 22,
+//      .det_pin        = ... not connected
+        .rdy_pin        = AT91_PIN_PC13,
+        .enable_pin     = AT91_PIN_PC14,
+        .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+        .bus_width_16   = 1,
+#else
+        .bus_width_16   = 0,
+#endif
+};
+
+/*
+ * GPIO Buttons
+ */
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+        {       /* USER PUSH BUTTON */
+                .code           = KEY_ENTER,
+                .gpio           = AT91_PIN_PB10,
+                .active_low     = 1,
+                .desc           = "user_pb",
+                .wakeup         = 1,
+        }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+        .buttons        = ek_buttons,
+        .nbuttons       = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .num_resources  = 0,
+        .dev            = {
+                .platform_data  = &ek_button_data,
+        }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+        at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
+        at91_set_deglitch(AT91_PIN_PB10, 1);
+
+        platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+        {       /* user_led (green) */
+                .name                   = "user_led",
+                .gpio                   = AT91_PIN_PB21,
+                .active_low             = 0,
+                .default_trigger        = "heartbeat",
+        }
+};
+
+static void __init ek_board_init(void)
+{
+        /* Serial */
+        at91_add_device_serial();
+        /* USB Host */
+        at91_add_device_usbh(&ek_usbh_data);
+        /* USB Device */
+        at91_add_device_udc(&ek_udc_data);
+        /* NAND */
+        at91_add_device_nand(&ek_nand_data);
+        /* I2C */
+        at91_add_device_i2c(NULL, 0);
+        /* Ethernet */
+        at91_add_device_eth(&ek_macb_data);
+        /* Push Buttons */
+        ek_add_device_buttons();
+        /* LEDs */
+        at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+        /* shutdown controller, wakeup button (5 msec low) */
+        at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+                                | AT91_SHDW_RTTWKEN);
+}
+
+MACHINE_START(USB_A9260, "CALAO USB_A9260")
+        /* Maintainer: calao-systems */
+        .phys_io        = AT91_BASE_SYS,
+        .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+        .boot_params    = AT91_SDRAM_BASE + 0x100,
+        .timer          = &at91sam926x_timer,
+        .map_io         = ek_map_io,
+        .init_irq       = ek_init_irq,
+        .init_machine   = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
new file mode 100644
index 000000000000..95800d32bd49
--- /dev/null
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -0,0 +1,230 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a9263.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Atmel Corporation.
+ *  Copyright (C) 2007 Calao-systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_shdwc.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+        /* Initialize processor: 12.00 MHz crystal */
+        at91sam9263_initialize(12000000);
+
+        /* DGBU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+        at91sam9263_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+        .ports          = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+        .vbus_pin       = AT91_PIN_PB11,
+        .pullup_pin     = 0,            /* pull-up driven by UDC */
+};
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+        {       /* DataFlash chip */
+                .modalias       = "mtd_dataflash",
+                .chip_select    = 0,
+                .max_speed_hz   = 15 * 1000 * 1000,
+                .bus_num        = 0,
+        }
+#endif
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+        .phy_irq_pin    = AT91_PIN_PE31,
+        .is_rmii        = 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+        {
+                .name   = "Linux Kernel",
+                .offset = 0x00000000,
+                .size   = 16 * 1024 * 1024,
+        },
+        {
+                .name   = "Root FS",
+                .offset = 0x01000000,
+                .size   = 120 * 1024 * 1024,
+        },
+        {
+                .name   = "FS",
+                .offset = 0x08800000,
+                .size   = 120 * 1024 * 1024,
+        }
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+        *num_partitions = ARRAY_SIZE(ek_nand_partition);
+        return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+        .ale            = 21,
+        .cle            = 22,
+//      .det_pin        = ... not connected
+        .rdy_pin        = AT91_PIN_PA22,
+        .enable_pin     = AT91_PIN_PD15,
+        .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+        .bus_width_16   = 1,
+#else
+        .bus_width_16   = 0,
+#endif
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+        {       /* USER PUSH BUTTON */
+                .code           = KEY_ENTER,
+                .gpio           = AT91_PIN_PB10,
+                .active_low     = 1,
+                .desc           = "user_pb",
+                .wakeup         = 1,
+        }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+        .buttons        = ek_buttons,
+        .nbuttons       = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .num_resources  = 0,
+        .dev            = {
+                .platform_data  = &ek_button_data,
+        }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+        at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
+        at91_set_deglitch(AT91_PIN_PB10, 1);
+
+        platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+        {       /* user_led (green) */
+                .name                   = "user_led",
+                .gpio                   = AT91_PIN_PB21,
+                .active_low             = 1,
+                .default_trigger        = "heartbeat",
+        }
+};
+
+
+static void __init ek_board_init(void)
+{
+        /* Serial */
+        at91_add_device_serial();
+        /* USB Host */
+        at91_add_device_usbh(&ek_usbh_data);
+        /* USB Device */
+        at91_add_device_udc(&ek_udc_data);
+        /* SPI */
+        at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+        /* Ethernet */
+        at91_add_device_eth(&ek_macb_data);
+        /* NAND */
+        at91_add_device_nand(&ek_nand_data);
+        /* I2C */
+        at91_add_device_i2c(NULL, 0);
+        /* Push Buttons */
+        ek_add_device_buttons();
+        /* LEDs */
+        at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+        /* shutdown controller, wakeup button (5 msec low) */
+        at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+                                | AT91_SHDW_RTTWKEN);
+}
+
+MACHINE_START(USB_A9263, "CALAO USB_A9263")
+        /* Maintainer: calao-systems */
+        .phys_io        = AT91_BASE_SYS,
+        .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+        .boot_params    = AT91_SDRAM_BASE + 0x100,
+        .timer          = &at91sam926x_timer,
+        .map_io         = ek_map_io,
+        .init_irq       = ek_init_irq,
+        .init_machine   = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index e642b3a8bd10..bbbfd06f5e0c 100755
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -1,11 +1,10 @@
 /*
  * linux/arch/arm/mach-at91/board-yl-9200.c
  *
- * Adapted from:
- *various board files in
- * /arch/arm/mach-at91
- * modifications  to convert to  YL-9200 platform
- *  Copyright (C) 2007 S.Birtles
+ * Adapted from various board files in arch/arm/mach-at91
+ *
+ * Modifications for YL-9200 platform:
+ *  Copyright (C) 2007 S. Birtles
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,13 +25,14 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
-/*#include <linux/can_bus/candata.h>*/
 #include <linux/spi/ads7846.h>
 #include <linux/mtd/physmap.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 
-/*#include <sound/gpio_sounder.h>*/
 #include <asm/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -45,179 +45,108 @@
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91rm9200_mc.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
 
 #include "generic.h"
-#include <asm/arch/at91_pio.h>
 
-#define YL_9200_FLASH_BASE      AT91_CHIPSELECT_0
-#define YL_9200_FLASH_SIZE      0x800000
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- *atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL
- *atmel_usart.1: ttyS1 at MMIO 0xfffc0000 (irq = 6) is a ATMEL_SERIAL
- *atmel_usart.2: ttyS2 at MMIO 0xfffc4000 (irq = 7) is a ATMEL_SERIAL
- *atmel_usart.3: ttyS3 at MMIO 0xfffc8000 (irq = 8) is a ATMEL_SERIAL
- *atmel_usart.4: ttyS4 at MMIO 0xfffcc000 (irq = 9) is a ATMEL_SERIAL
- * on the YL-9200 we are sitting at the following
- *ttyS0 at MMIO 0xfefff200 (irq = 1) is a AT91_SERIAL
- *ttyS1 at MMIO 0xfefc4000 (irq = 7) is a AT91_SERIAL
- */
+static void __init yl9200_map_io(void)
+{
+        /* Initialize processor: 18.432 MHz crystal */
+        at91rm9200_initialize(18432000, AT91RM9200_PQFP);
 
-/* extern void __init yl_9200_add_device_sounder(struct gpio_sounder *sounders, int nr);*/
+        /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
+        at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
 
-static struct at91_uart_config __initdata yl_9200_uart_config = {
-        .console_tty    = 0,                            /* ttyS0 */
-        .nr_tty         = 3,
-        .tty_map        = { 4, 1, 0, -1, -1 }           /* ttyS0, ..., ttyS4 */
-};
+        /* DBGU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
 
-static void __init yl_9200_map_io(void)
-{
-        /* Initialize processor: 18.432 MHz crystal */
-        /*Also initialises register clocks & gpio*/
-        at91rm9200_initialize(18432000, AT91RM9200_PQFP); /*we have a 3 bank system*/
+        /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+        at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                        | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+                        | ATMEL_UART_RI);
 
-        /* Setup the serial ports and console */
-        at91_init_serial(&yl_9200_uart_config);
+        /* USART0 on ttyS2. (Rx & Tx only to JP3) */
+        at91_register_uart(AT91RM9200_ID_US0, 2, 0);
 
-        /* Setup the LEDs D2=PB17,D3=PB16 */
-        at91_init_leds(AT91_PIN_PB16,AT91_PIN_PB17); /*cpu-led,timer-led*/
+        /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
+        at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
+
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
 }
 
-static void __init yl_9200_init_irq(void)
+static void __init yl9200_init_irq(void)
 {
         at91rm9200_init_interrupts(NULL);
 }
 
-static struct at91_eth_data __initdata yl_9200_eth_data = {
-        .phy_irq_pin    = AT91_PIN_PB28,
-        .is_rmii        = 1,
-};
 
-static struct at91_usbh_data __initdata yl_9200_usbh_data = {
-        .ports          = 1,  /* this should be 1 not 2 for the Yl9200*/
+/*
+ * LEDs
+ */
+static struct gpio_led yl9200_leds[] = {
+        {       /* D2 */
+                .name                   = "led2",
+                .gpio                   = AT91_PIN_PB17,
+                .active_low             = 1,
+                .default_trigger        = "timer",
+        },
+        {       /* D3 */
+                .name                   = "led3",
+                .gpio                   = AT91_PIN_PB16,
+                .active_low             = 1,
+                .default_trigger        = "heartbeat",
+        },
+        {       /* D4 */
+                .name                   = "led4",
+                .gpio                   = AT91_PIN_PB15,
+                .active_low             = 1,
+        },
+        {       /* D5 */
+                .name                   = "led5",
+                .gpio                   = AT91_PIN_PB8,
+                .active_low             = 1,
+        }
 };
 
-static struct at91_udc_data __initdata yl_9200_udc_data = {
-/*on sheet 7 Schemitic rev 1.0*/
-        .pullup_pin     = AT91_PIN_PC4,
-        .vbus_pin=  AT91_PIN_PC5,
-        .pullup_active_low = 1, /*ACTIVE LOW!! due to PNP transistor on page 7*/
-
-};
 /*
-static struct at91_cf_data __initdata yl_9200_cf_data = {
-TODO S.BIRTLES
-        .det_pin        = AT91_PIN_xxx,
-        .rst_pin        = AT91_PIN_xxx,
-        .irq_pin        = ... not connected
-        .vcc_pin        = ... always powered
-
+ * Ethernet
+ */
+static struct at91_eth_data __initdata yl9200_eth_data = {
+        .phy_irq_pin            = AT91_PIN_PB28,
+        .is_rmii                = 1,
 };
-*/
-static struct at91_mmc_data __initdata yl_9200_mmc_data = {
-        .det_pin        = AT91_PIN_PB9, /*THIS LOOKS CORRECT SHEET7*/
-/*      .wp_pin         = ... not connected  SHEET7*/
-        .slot_b         = 0,
-        .wire4          = 1,
 
+/*
+ * USB Host
+ */
+static struct at91_usbh_data __initdata yl9200_usbh_data = {
+        .ports                  = 1,    /* PQFP version of AT91RM9200 */
 };
 
-/* --------------------------------------------------------------------
- *  Touch screen
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
-        return !at91_get_gpio_value(AT91_PIN_PB11);     /* Touchscreen PENIRQ */
-}
-
-static void __init at91_init_device_ts(void)
-{
-/*IMPORTANT NOTE THE SPI INTERFACE IS ALREADY CONFIGURED BY XXX_DEVICES.C
-THAT IS TO SAY THAT  MISO,MOSI,SPCK AND CS  are already configured
-we only need to enable the other datapins which are:
-PB10/RK1 BUSY
-*/
-/* Touchscreen BUSY signal ,  pin,use pullup ( TODO not currently used in the ADS7843/6.c driver)*/
-at91_set_gpio_input(AT91_PIN_PB10, 1);
-}
-
-#else
-static void __init at91_init_device_ts(void) {}
-#endif
-
-static struct ads7846_platform_data ads_info = {
-        .model                  = 7843,
-        .x_min                  = 150,
-        .x_max                  = 3830,
-        .y_min                  = 190,
-        .y_max                  = 3830,
-        .vref_delay_usecs       = 100,
-/* for a 8" touch screen*/
-        //.x_plate_ohms         = 603, //= 450, S.Birtles TODO
-        //.y_plate_ohms         = 332, //= 250, S.Birtles TODO
-/*for a 10.4" touch screen*/
-        //.x_plate_ohms         =611,
-        //.y_plate_ohms         =325,
-
-        .x_plate_ohms   = 576,
-        .y_plate_ohms   = 366,
-                //
-        .pressure_max           = 15000, /*generally nonsense on the 7843*/
-         /*number of times to send query to chip in a given run 0 equals one time (do not set to 0!! ,there is a bug in ADS 7846 code)*/
-        .debounce_max           = 1,
-        .debounce_rep           = 0,
-        .debounce_tol           = (~0),
-        .get_pendown_state      = ads7843_pendown_state,
-};
+/*
+ * USB Device
+ */
+static struct at91_udc_data __initdata yl9200_udc_data = {
+        .pullup_pin             = AT91_PIN_PC4,
+        .vbus_pin               = AT91_PIN_PC5,
+        .pullup_active_low      = 1,    /* Active Low due to PNP transistor (pg 7) */
 
-/*static struct canbus_platform_data can_info = {
-        .model                  = 2510,
 };
-*/
-
-static struct spi_board_info yl_9200_spi_devices[] = {
-/*this sticks it at:
- /sys/devices/platform/atmel_spi.0/spi0.0
- /sys/bus/platform/devices/
-Documentation/spi IIRC*/
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- /*(this IS correct 04-NOV-2007)*/
-        {
-                .modalias               = "ads7846", /* because the driver is called ads7846*/
-                .chip_select    = 0, /*THIS MUST BE AN INDEX INTO AN ARRAY OF  pins */
-/*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select*/
-                /*.controller_data =AT91_PIN_PA3 ,*/
-                .max_speed_hz   = 5000*26, /*(4700 * 26)-125000 * 26, (max sample rate @ 3V) * (cmd + data + overhead) */
-                .bus_num                = 0,
-                .platform_data  = &ads_info,
-                .irq                    = AT91_PIN_PB11,
-        },
-#endif
-/*we need to put our CAN driver data here!!*/
-/*THIS IS ALL DUMMY DATA*/
-/*      {
-                .modalias               = "mcp2510", //DUMMY for MCP2510 chip
-                .chip_select    = 1,*/ /*THIS MUST BE AN INDEX INTO AN ARRAY OF  pins */
-        /*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select */
-        /*  .controller_data =AT91_PIN_PA4 ,
-                .max_speed_hz   = 25000 * 26,
-                .bus_num                = 0,
-                .platform_data  = &can_info,
-                .irq                    = AT91_PIN_PC0,
-        },
-        */
-        //max SPI chip needs to go here
+/*
+ * MMC
+ */
+static struct at91_mmc_data __initdata yl9200_mmc_data = {
+        .det_pin        = AT91_PIN_PB9,
+        // .wp_pin      = ... not connected
+        .wire4          = 1,
 };
 
-static struct mtd_partition __initdata yl_9200_nand_partition[] = {
+/*
+ * NAND Flash
+ */
+static struct mtd_partition __initdata yl9200_nand_partition[] = {
         {
                 .name   = "AT91 NAND partition 1, boot",
                 .offset = 0,
@@ -242,442 +171,434 @@ static struct mtd_partition __initdata yl_9200_nand_partition[] = {
                 .name   = "AT91 NAND partition 5, ext-fs",
                 .offset = 32 * SZ_1M,
                 .size   = 32 * SZ_1M
-        },
+        }
 };
 
 static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
 {
-        *num_partitions = ARRAY_SIZE(yl_9200_nand_partition);
-        return yl_9200_nand_partition;
+        *num_partitions = ARRAY_SIZE(yl9200_nand_partition);
+        return yl9200_nand_partition;
 }
 
-static struct atmel_nand_data __initdata yl_9200_nand_data = {
-        .ale= 6,
-        .cle= 7,
-        /*.det_pin      = AT91_PIN_PCxx,*/   /*we don't have a det pin because NandFlash is fixed to board*/
-        .rdy_pin        = AT91_PIN_PC14,  /*R/!B Sheet10*/
-        .enable_pin     = AT91_PIN_PC15,  /*!CE  Sheet10 */
+static struct atmel_nand_data __initdata yl9200_nand_data = {
+        .ale            = 6,
+        .cle            = 7,
+        // .det_pin     = ... not connected
+        .rdy_pin        = AT91_PIN_PC14,        /* R/!B (Sheet10) */
+        .enable_pin     = AT91_PIN_PC15,        /* !CE  (Sheet10) */
         .partition_info = nand_partitions,
 };
 
-
-
 /*
-TODO S.Birtles
-potentially a problem with the size above
-physmap platform flash device: 00800000 at 10000000
-physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
-NOR chip too large to fit in mapping. Attempting to cope...
- Intel/Sharp Extended Query Table at 0x0031
-Using buffer write method
-cfi_cmdset_0001: Erase suspend on write enabled
-Reducing visibility of 16384KiB chip to 8192KiB
-*/
+ * NOR Flash
+ */
+#define YL9200_FLASH_BASE       AT91_CHIPSELECT_0
+#define YL9200_FLASH_SIZE       0x1000000
 
-static struct mtd_partition yl_9200_flash_partitions[] = {
+static struct mtd_partition yl9200_flash_partitions[] = {
+        {
+                .name           = "Bootloader",
+                .size           = 0x00040000,
+                .offset         = 0,
+                .mask_flags     = MTD_WRITEABLE,        /* force read-only */
+        },
         {
-                .name =         "Bootloader",
-                .size =         0x00040000,
-                .offset =       0,
-                .mask_flags =   MTD_WRITEABLE  /* force read-only */
-        },{
-                .name =         "Kernel",
-                .size =         0x001C0000,
-                .offset =       0x00040000,
-        },{
-                .name =         "Filesystem",
-                .size =         MTDPART_SIZ_FULL,
-                .offset =       0x00200000
+                .name           = "Kernel",
+                .size           = 0x001C0000,
+                .offset         = 0x00040000,
+        },
+        {
+                .name           = "Filesystem",
+                .size           = MTDPART_SIZ_FULL,
+                .offset         = 0x00200000
         }
-
 };
 
-static struct physmap_flash_data yl_9200_flash_data = {
-        .width  = 2,
-        .parts          = yl_9200_flash_partitions,
-        .nr_parts       = ARRAY_SIZE(yl_9200_flash_partitions),
+static struct physmap_flash_data yl9200_flash_data = {
+        .width          = 2,
+        .parts          = yl9200_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(yl9200_flash_partitions),
 };
 
-static struct resource yl_9200_flash_resources[] = {
-{
-        .start          = YL_9200_FLASH_BASE,
-        .end            = YL_9200_FLASH_BASE + YL_9200_FLASH_SIZE - 1,
-        .flags          = IORESOURCE_MEM,
+static struct resource yl9200_flash_resources[] = {
+        {
+                .start  = YL9200_FLASH_BASE,
+                .end    = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
+                .flags  = IORESOURCE_MEM,
         }
 };
 
-static struct platform_device yl_9200_flash = {
+static struct platform_device yl9200_flash = {
         .name           = "physmap-flash",
         .id             = 0,
         .dev            = {
-                                .platform_data  = &yl_9200_flash_data,
+                                .platform_data  = &yl9200_flash_data,
                         },
-        .resource       = yl_9200_flash_resources,
-        .num_resources  = ARRAY_SIZE(yl_9200_flash_resources),
+        .resource       = yl9200_flash_resources,
+        .num_resources  = ARRAY_SIZE(yl9200_flash_resources),
 };
 
-
-static struct gpio_led yl_9200_leds[] = {
-/*D2 &D3 are passed directly in via at91_init_leds*/
-        {
-                .name                   = "led4",  /*D4*/
-                .gpio                   = AT91_PIN_PB15,
-                .active_low             = 1,
-                .default_trigger        = "heartbeat",
-                /*.default_trigger      = "timer",*/
-        },
-        {
-                .name                   = "led5",  /*D5*/
-                .gpio                   = AT91_PIN_PB8,
-                .active_low             = 1,
-                .default_trigger        = "heartbeat",
-        }
-};
-
-//static struct gpio_sounder yl_9200_sounder[] = {*/
-/*This is a simple speaker attached to a gpo line*/
-
-//      {
-//              .name                   = "Speaker",  /*LS1*/
-//              .gpio                   = AT91_PIN_PA22,
-//              .active_low             = 0,
-//              .default_trigger        = "heartbeat",
-                /*.default_trigger      = "timer",*/
-//      },
-//};
-
-
-
-static struct i2c_board_info __initdata yl_9200_i2c_devices[] = {
-        {
-        /*TODO*/
-                I2C_BOARD_INFO("CS4334", 0x00),
+/*
+ * I2C (TWI)
+ */
+static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
+        {       /* EEPROM */
+                I2C_BOARD_INFO("24c128", 0x50),
         }
 };
 
-
- /*
+/*
  * GPIO Buttons
- */
+*/
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button yl_9200_buttons[] = {
+static struct gpio_keys_button yl9200_buttons[] = {
         {
                 .gpio           = AT91_PIN_PA24,
-                .code   = BTN_2,
+                .code           = BTN_2,
                 .desc           = "SW2",
                 .active_low     = 1,
                 .wakeup         = 1,
         },
         {
                 .gpio           = AT91_PIN_PB1,
-                .code   = BTN_3,
+                .code           = BTN_3,
                 .desc           = "SW3",
                 .active_low     = 1,
                 .wakeup         = 1,
         },
         {
                 .gpio           = AT91_PIN_PB2,
-                .code   = BTN_4,
+                .code           = BTN_4,
                 .desc           = "SW4",
                 .active_low     = 1,
                 .wakeup         = 1,
         },
         {
                 .gpio           = AT91_PIN_PB6,
-                .code   = BTN_5,
+                .code           = BTN_5,
                 .desc           = "SW5",
                 .active_low     = 1,
                 .wakeup         = 1,
-        },
-
+        }
 };
 
-static struct gpio_keys_platform_data yl_9200_button_data = {
-        .buttons        = yl_9200_buttons,
-        .nbuttons       = ARRAY_SIZE(yl_9200_buttons),
+static struct gpio_keys_platform_data yl9200_button_data = {
+        .buttons        = yl9200_buttons,
+        .nbuttons       = ARRAY_SIZE(yl9200_buttons),
 };
 
-static struct platform_device yl_9200_button_device = {
+static struct platform_device yl9200_button_device = {
         .name           = "gpio-keys",
         .id             = -1,
         .num_resources  = 0,
         .dev            = {
-        .platform_data  = &yl_9200_button_data,
+                .platform_data  = &yl9200_button_data,
         }
 };
 
-static void __init yl_9200_add_device_buttons(void)
+static void __init yl9200_add_device_buttons(void)
 {
-        //SW2
-        at91_set_gpio_input(AT91_PIN_PA24, 0);
+        at91_set_gpio_input(AT91_PIN_PA24, 1);  /* SW2 */
         at91_set_deglitch(AT91_PIN_PA24, 1);
-
-        //SW3
-        at91_set_gpio_input(AT91_PIN_PB1, 0);
+        at91_set_gpio_input(AT91_PIN_PB1, 1);   /* SW3 */
         at91_set_deglitch(AT91_PIN_PB1, 1);
-        //SW4
-        at91_set_gpio_input(AT91_PIN_PB2, 0);
+        at91_set_gpio_input(AT91_PIN_PB2, 1);   /* SW4 */
         at91_set_deglitch(AT91_PIN_PB2, 1);
-
-        //SW5
-        at91_set_gpio_input(AT91_PIN_PB6, 0);
+        at91_set_gpio_input(AT91_PIN_PB6, 1);   /* SW5 */
         at91_set_deglitch(AT91_PIN_PB6, 1);
 
+        /* Enable buttons (Sheet 5) */
+        at91_set_gpio_output(AT91_PIN_PB7, 1);
+
+        platform_device_register(&yl9200_button_device);
+}
+#else
+static void __init yl9200_add_device_buttons(void) {}
+#endif
+
+/*
+ * Touchscreen
+ */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+static int ads7843_pendown_state(void)
+{
+        return !at91_get_gpio_value(AT91_PIN_PB11);     /* Touchscreen PENIRQ */
+}
+
+static struct ads7846_platform_data ads_info = {
+        .model                  = 7843,
+        .x_min                  = 150,
+        .x_max                  = 3830,
+        .y_min                  = 190,
+        .y_max                  = 3830,
+        .vref_delay_usecs       = 100,
+
+        /* For a 8" touch-screen */
+        // .x_plate_ohms                = 603,
+        // .y_plate_ohms                = 332,
+
+        /* For a 10.4" touch-screen */
+        // .x_plate_ohms                = 611,
+        // .y_plate_ohms                = 325,
+
+        .x_plate_ohms           = 576,
+        .y_plate_ohms           = 366,
+
+        .pressure_max           = 15000, /* generally nonsense on the 7843 */
+        .debounce_max           = 1,
+        .debounce_rep           = 0,
+        .debounce_tol           = (~0),
+        .get_pendown_state      = ads7843_pendown_state,
+};
 
-        at91_set_gpio_output(AT91_PIN_PB7, 1);  /* #TURN BUTTONS ON, SHEET 5  of schematics */
-        platform_device_register(&yl_9200_button_device);
+static void __init yl9200_add_device_ts(void)
+{
+        at91_set_gpio_input(AT91_PIN_PB11, 1);  /* Touchscreen interrupt pin */
+        at91_set_gpio_input(AT91_PIN_PB10, 1);  /* Touchscreen BUSY signal - not used! */
 }
 #else
-static void __init yl_9200_add_device_buttons(void) {}
+static void __init yl9200_add_device_ts(void) {}
+#endif
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info yl9200_spi_devices[] = {
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+        {       /* Touchscreen */
+                .modalias       = "ads7846",
+                .chip_select    = 0,
+                .max_speed_hz   = 5000 * 26,
+                .platform_data  = &ads_info,
+                .irq            = AT91_PIN_PB11,
+        },
 #endif
+        {       /* CAN */
+                .modalias       = "mcp2510",
+                .chip_select    = 1,
+                .max_speed_hz   = 25000 * 26,
+                .irq            = AT91_PIN_PC0,
+        }
+};
 
+/*
+ * LCD / VGA
+ *
+ * EPSON S1D13806 FB (discontinued chip)
+ * EPSON S1D13506 FB
+ */
 #if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
 #include <video/s1d13xxxfb.h>
 
-/* EPSON S1D13806 FB (discontinued chip)*/
-/* EPSON S1D13506 FB */
-
 #define AT91_FB_REG_BASE        0x80000000L
 #define AT91_FB_REG_SIZE        0x200
 #define AT91_FB_VMEM_BASE       0x80200000L
 #define AT91_FB_VMEM_SIZE       0x200000L
 
-/*#define S1D_DISPLAY_WIDTH           640*/
-/*#define S1D_DISPLAY_HEIGHT          480*/
-
-
-static void __init yl_9200_init_video(void)
+static void __init yl9200_init_video(void)
 {
-        at91_sys_write(AT91_PIOC + PIO_ASR,AT91_PIN_PC6);
-        at91_sys_write(AT91_PIOC + PIO_BSR,0);
-        at91_sys_write(AT91_PIOC + PIO_ASR,AT91_PIN_PC6);
-
-        at91_sys_write( AT91_SMC_CSR(2),
-        AT91_SMC_NWS_(0x4) |
-        AT91_SMC_WSEN |
-        AT91_SMC_TDF_(0x100) |
-        AT91_SMC_DBW
-        );
-
-
+        /* NWAIT Signal */
+        at91_set_A_periph(AT91_PIN_PC6, 0);
 
+        /* Initialization of the Static Memory Controller for Chip Select 2 */
+        at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16         /* 16 bit */
+                        | AT91_SMC_WSEN | AT91_SMC_NWS_(0x4)    /* wait states */
+                        | AT91_SMC_TDF_(0x100)                  /* float time */
+        );
 }
 
-
-static struct s1d13xxxfb_regval yl_9200_s1dfb_initregs[] =
+static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
 {
-        {S1DREG_MISC,                           0x00},   /* Miscellaneous Register*/
-        {S1DREG_COM_DISP_MODE,          0x01},   /* Display Mode Register, LCD only*/
-        {S1DREG_GPIO_CNF0,                      0x00},   /* General IO Pins Configuration Register*/
-        {S1DREG_GPIO_CTL0,                      0x00},   /* General IO Pins Control Register*/
-        {S1DREG_CLK_CNF,                        0x11},   /* Memory Clock Configuration Register*/
-        {S1DREG_LCD_CLK_CNF,            0x10},   /* LCD Pixel Clock Configuration Register*/
-        {S1DREG_CRT_CLK_CNF,            0x12},   /* CRT/TV Pixel Clock Configuration Register*/
-        {S1DREG_MPLUG_CLK_CNF,          0x01},   /* MediaPlug Clock Configuration Register*/
-        {S1DREG_CPU2MEM_WST_SEL,        0x02},   /* CPU To Memory Wait State Select Register*/
-        {S1DREG_MEM_CNF,                        0x00},   /* Memory Configuration Register*/
-        {S1DREG_SDRAM_REF_RATE,         0x04},   /* DRAM Refresh Rate Register, MCLK source*/
-        {S1DREG_SDRAM_TC0,                      0x12},   /* DRAM Timings Control Register 0*/
-        {S1DREG_SDRAM_TC1,                      0x02},   /* DRAM Timings Control Register 1*/
-        {S1DREG_PANEL_TYPE,                     0x25},   /* Panel Type Register*/
-        {S1DREG_MOD_RATE,                       0x00},   /* MOD Rate Register*/
-        {S1DREG_LCD_DISP_HWIDTH,        0x4F},   /* LCD Horizontal Display Width Register*/
-        {S1DREG_LCD_NDISP_HPER,         0x13},   /* LCD Horizontal Non-Display Period Register*/
-        {S1DREG_TFT_FPLINE_START,       0x01},   /* TFT FPLINE Start Position Register*/
-        {S1DREG_TFT_FPLINE_PWIDTH,      0x0c},   /* TFT FPLINE Pulse Width Register*/
-        {S1DREG_LCD_DISP_VHEIGHT0,      0xDF},   /* LCD Vertical Display Height Register 0*/
-        {S1DREG_LCD_DISP_VHEIGHT1,      0x01},   /* LCD Vertical Display Height Register 1*/
-        {S1DREG_LCD_NDISP_VPER,         0x2c},   /* LCD Vertical Non-Display Period Register*/
-        {S1DREG_TFT_FPFRAME_START,      0x0a},   /* TFT FPFRAME Start Position Register*/
-        {S1DREG_TFT_FPFRAME_PWIDTH,     0x02},   /* TFT FPFRAME Pulse Width Register*/
-        {S1DREG_LCD_DISP_MODE,          0x05},   /* LCD Display Mode Register*/
-        {S1DREG_LCD_MISC,                       0x01},   /* LCD Miscellaneous Register*/
-        {S1DREG_LCD_DISP_START0,        0x00},   /* LCD Display Start Address Register 0*/
-        {S1DREG_LCD_DISP_START1,        0x00},   /* LCD Display Start Address Register 1*/
-        {S1DREG_LCD_DISP_START2,        0x00},   /* LCD Display Start Address Register 2*/
-        {S1DREG_LCD_MEM_OFF0,           0x80},   /* LCD Memory Address Offset Register 0*/
-        {S1DREG_LCD_MEM_OFF1,           0x02},   /* LCD Memory Address Offset Register 1*/
-        {S1DREG_LCD_PIX_PAN,            0x03},   /* LCD Pixel Panning Register*/
-        {S1DREG_LCD_DISP_FIFO_HTC,      0x00},   /* LCD Display FIFO High Threshold Control Register*/
-        {S1DREG_LCD_DISP_FIFO_LTC,      0x00},   /* LCD Display FIFO Low Threshold Control Register*/
-        {S1DREG_CRT_DISP_HWIDTH,        0x4F},   /* CRT/TV Horizontal Display Width Register*/
-        {S1DREG_CRT_NDISP_HPER,         0x13},   /* CRT/TV Horizontal Non-Display Period Register*/
-        {S1DREG_CRT_HRTC_START,         0x01},   /* CRT/TV HRTC Start Position Register*/
-        {S1DREG_CRT_HRTC_PWIDTH,        0x0B},   /* CRT/TV HRTC Pulse Width Register*/
-        {S1DREG_CRT_DISP_VHEIGHT0,      0xDF},   /* CRT/TV Vertical Display Height Register 0*/
-        {S1DREG_CRT_DISP_VHEIGHT1,      0x01},   /* CRT/TV Vertical Display Height Register 1*/
-        {S1DREG_CRT_NDISP_VPER,         0x2B},   /* CRT/TV Vertical Non-Display Period Register*/
-        {S1DREG_CRT_VRTC_START,         0x09},   /* CRT/TV VRTC Start Position Register*/
-        {S1DREG_CRT_VRTC_PWIDTH,        0x01},   /* CRT/TV VRTC Pulse Width Register*/
-        {S1DREG_TV_OUT_CTL,                     0x18},   /* TV Output Control Register */
-        {S1DREG_CRT_DISP_MODE,          0x05},   /* CRT/TV Display Mode Register, 16BPP*/
-        {S1DREG_CRT_DISP_START0,        0x00},   /* CRT/TV Display Start Address Register 0*/
-        {S1DREG_CRT_DISP_START1,        0x00},   /* CRT/TV Display Start Address Register 1*/
-        {S1DREG_CRT_DISP_START2,        0x00},   /* CRT/TV Display Start Address Register 2*/
-        {S1DREG_CRT_MEM_OFF0,           0x80},   /* CRT/TV Memory Address Offset Register 0*/
-        {S1DREG_CRT_MEM_OFF1,           0x02},   /* CRT/TV Memory Address Offset Register 1*/
-        {S1DREG_CRT_PIX_PAN,            0x00},   /* CRT/TV Pixel Panning Register*/
-        {S1DREG_CRT_DISP_FIFO_HTC,      0x00},   /* CRT/TV Display FIFO High Threshold Control Register*/
-        {S1DREG_CRT_DISP_FIFO_LTC,      0x00},   /* CRT/TV Display FIFO Low Threshold Control Register*/
-        {S1DREG_LCD_CUR_CTL,            0x00},   /* LCD Ink/Cursor Control Register*/
-        {S1DREG_LCD_CUR_START,          0x01},   /* LCD Ink/Cursor Start Address Register*/
-        {S1DREG_LCD_CUR_XPOS0,          0x00},   /* LCD Cursor X Position Register 0*/
-        {S1DREG_LCD_CUR_XPOS1,          0x00},   /* LCD Cursor X Position Register 1*/
-        {S1DREG_LCD_CUR_YPOS0,          0x00},   /* LCD Cursor Y Position Register 0*/
-        {S1DREG_LCD_CUR_YPOS1,          0x00},   /* LCD Cursor Y Position Register 1*/
-        {S1DREG_LCD_CUR_BCTL0,          0x00},   /* LCD Ink/Cursor Blue Color 0 Register*/
-        {S1DREG_LCD_CUR_GCTL0,          0x00},   /* LCD Ink/Cursor Green Color 0 Register*/
-        {S1DREG_LCD_CUR_RCTL0,          0x00},   /* LCD Ink/Cursor Red Color 0 Register*/
-        {S1DREG_LCD_CUR_BCTL1,          0x1F},   /* LCD Ink/Cursor Blue Color 1 Register*/
-        {S1DREG_LCD_CUR_GCTL1,          0x3F},   /* LCD Ink/Cursor Green Color 1 Register*/
-        {S1DREG_LCD_CUR_RCTL1,          0x1F},   /* LCD Ink/Cursor Red Color 1 Register*/
-        {S1DREG_LCD_CUR_FIFO_HTC,       0x00},   /* LCD Ink/Cursor FIFO Threshold Register*/
-        {S1DREG_CRT_CUR_CTL,            0x00},   /* CRT/TV Ink/Cursor Control Register*/
-        {S1DREG_CRT_CUR_START,          0x01},   /* CRT/TV Ink/Cursor Start Address Register*/
-        {S1DREG_CRT_CUR_XPOS0,          0x00},   /* CRT/TV Cursor X Position Register 0*/
-        {S1DREG_CRT_CUR_XPOS1,          0x00},   /* CRT/TV Cursor X Position Register 1*/
-        {S1DREG_CRT_CUR_YPOS0,          0x00},   /* CRT/TV Cursor Y Position Register 0*/
-        {S1DREG_CRT_CUR_YPOS1,          0x00},   /* CRT/TV Cursor Y Position Register 1*/
-        {S1DREG_CRT_CUR_BCTL0,          0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register*/
-        {S1DREG_CRT_CUR_GCTL0,          0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register*/
-        {S1DREG_CRT_CUR_RCTL0,          0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register*/
-        {S1DREG_CRT_CUR_BCTL1,          0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register*/
-        {S1DREG_CRT_CUR_GCTL1,          0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register*/
-        {S1DREG_CRT_CUR_RCTL1,          0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register*/
-        {S1DREG_CRT_CUR_FIFO_HTC,       0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register*/
-        {S1DREG_BBLT_CTL0,                      0x00},   /* BitBlt Control Register 0*/
-        {S1DREG_BBLT_CTL1,                      0x01},   /* BitBlt Control Register 1*/
-        {S1DREG_BBLT_CC_EXP,            0x00},   /* BitBlt ROP Code/Color Expansion Register*/
-        {S1DREG_BBLT_OP,                        0x00},   /* BitBlt Operation Register*/
-        {S1DREG_BBLT_SRC_START0,        0x00},   /* BitBlt Source Start Address Register 0*/
-        {S1DREG_BBLT_SRC_START1,        0x00},   /* BitBlt Source Start Address Register 1*/
-        {S1DREG_BBLT_SRC_START2,        0x00},   /* BitBlt Source Start Address Register 2*/
-        {S1DREG_BBLT_DST_START0,        0x00},   /* BitBlt Destination Start Address Register 0*/
-        {S1DREG_BBLT_DST_START1,        0x00},   /* BitBlt Destination Start Address Register 1*/
-        {S1DREG_BBLT_DST_START2,        0x00},   /* BitBlt Destination Start Address Register 2*/
-        {S1DREG_BBLT_MEM_OFF0,          0x00},   /* BitBlt Memory Address Offset Register 0*/
-        {S1DREG_BBLT_MEM_OFF1,          0x00},   /* BitBlt Memory Address Offset Register 1*/
-        {S1DREG_BBLT_WIDTH0,            0x00},   /* BitBlt Width Register 0*/
-        {S1DREG_BBLT_WIDTH1,            0x00},   /* BitBlt Width Register 1*/
-        {S1DREG_BBLT_HEIGHT0,           0x00},   /* BitBlt Height Register 0*/
-        {S1DREG_BBLT_HEIGHT1,           0x00},   /* BitBlt Height Register 1*/
-        {S1DREG_BBLT_BGC0,                      0x00},   /* BitBlt Background Color Register 0*/
-        {S1DREG_BBLT_BGC1,                      0x00},   /* BitBlt Background Color Register 1*/
-        {S1DREG_BBLT_FGC0,                      0x00},   /* BitBlt Foreground Color Register 0*/
-        {S1DREG_BBLT_FGC1,                      0x00},   /* BitBlt Foreground Color Register 1*/
-        {S1DREG_LKUP_MODE,                      0x00},   /* Look-Up Table Mode Register*/
-        {S1DREG_LKUP_ADDR,                      0x00},   /* Look-Up Table Address Register*/
-        {S1DREG_PS_CNF,                         0x00},   /* Power Save Configuration Register*/
-        {S1DREG_PS_STATUS,                      0x00},   /* Power Save Status Register*/
-        {S1DREG_CPU2MEM_WDOGT,          0x00},   /* CPU-to-Memory Access Watchdog Timer Register*/
-        {S1DREG_COM_DISP_MODE,          0x01},   /* Display Mode Register, LCD only*/
+        {S1DREG_MISC,                   0x00},  /* Miscellaneous Register*/
+        {S1DREG_COM_DISP_MODE,          0x01},  /* Display Mode Register, LCD only*/
+        {S1DREG_GPIO_CNF0,              0x00},  /* General IO Pins Configuration Register*/
+        {S1DREG_GPIO_CTL0,              0x00},  /* General IO Pins Control Register*/
+        {S1DREG_CLK_CNF,                0x11},  /* Memory Clock Configuration Register*/
+        {S1DREG_LCD_CLK_CNF,            0x10},  /* LCD Pixel Clock Configuration Register*/
+        {S1DREG_CRT_CLK_CNF,            0x12},  /* CRT/TV Pixel Clock Configuration Register*/
+        {S1DREG_MPLUG_CLK_CNF,          0x01},  /* MediaPlug Clock Configuration Register*/
+        {S1DREG_CPU2MEM_WST_SEL,        0x02},  /* CPU To Memory Wait State Select Register*/
+        {S1DREG_MEM_CNF,                0x00},  /* Memory Configuration Register*/
+        {S1DREG_SDRAM_REF_RATE,         0x04},  /* DRAM Refresh Rate Register, MCLK source*/
+        {S1DREG_SDRAM_TC0,              0x12},  /* DRAM Timings Control Register 0*/
+        {S1DREG_SDRAM_TC1,              0x02},  /* DRAM Timings Control Register 1*/
+        {S1DREG_PANEL_TYPE,             0x25},  /* Panel Type Register*/
+        {S1DREG_MOD_RATE,               0x00},  /* MOD Rate Register*/
+        {S1DREG_LCD_DISP_HWIDTH,        0x4F},  /* LCD Horizontal Display Width Register*/
+        {S1DREG_LCD_NDISP_HPER,         0x13},  /* LCD Horizontal Non-Display Period Register*/
+        {S1DREG_TFT_FPLINE_START,       0x01},  /* TFT FPLINE Start Position Register*/
+        {S1DREG_TFT_FPLINE_PWIDTH,      0x0c},  /* TFT FPLINE Pulse Width Register*/
+        {S1DREG_LCD_DISP_VHEIGHT0,      0xDF},  /* LCD Vertical Display Height Register 0*/
+        {S1DREG_LCD_DISP_VHEIGHT1,      0x01},  /* LCD Vertical Display Height Register 1*/
+        {S1DREG_LCD_NDISP_VPER,         0x2c},  /* LCD Vertical Non-Display Period Register*/
+        {S1DREG_TFT_FPFRAME_START,      0x0a},  /* TFT FPFRAME Start Position Register*/
+        {S1DREG_TFT_FPFRAME_PWIDTH,     0x02},  /* TFT FPFRAME Pulse Width Register*/
+        {S1DREG_LCD_DISP_MODE,          0x05},  /* LCD Display Mode Register*/
+        {S1DREG_LCD_MISC,               0x01},  /* LCD Miscellaneous Register*/
+        {S1DREG_LCD_DISP_START0,        0x00},  /* LCD Display Start Address Register 0*/
+        {S1DREG_LCD_DISP_START1,        0x00},  /* LCD Display Start Address Register 1*/
+        {S1DREG_LCD_DISP_START2,        0x00},  /* LCD Display Start Address Register 2*/
+        {S1DREG_LCD_MEM_OFF0,           0x80},  /* LCD Memory Address Offset Register 0*/
+        {S1DREG_LCD_MEM_OFF1,           0x02},  /* LCD Memory Address Offset Register 1*/
+        {S1DREG_LCD_PIX_PAN,            0x03},  /* LCD Pixel Panning Register*/
+        {S1DREG_LCD_DISP_FIFO_HTC,      0x00},  /* LCD Display FIFO High Threshold Control Register*/
+        {S1DREG_LCD_DISP_FIFO_LTC,      0x00},  /* LCD Display FIFO Low Threshold Control Register*/
+        {S1DREG_CRT_DISP_HWIDTH,        0x4F},  /* CRT/TV Horizontal Display Width Register*/
+        {S1DREG_CRT_NDISP_HPER,         0x13},  /* CRT/TV Horizontal Non-Display Period Register*/
+        {S1DREG_CRT_HRTC_START,         0x01},  /* CRT/TV HRTC Start Position Register*/
+        {S1DREG_CRT_HRTC_PWIDTH,        0x0B},  /* CRT/TV HRTC Pulse Width Register*/
+        {S1DREG_CRT_DISP_VHEIGHT0,      0xDF},  /* CRT/TV Vertical Display Height Register 0*/
+        {S1DREG_CRT_DISP_VHEIGHT1,      0x01},  /* CRT/TV Vertical Display Height Register 1*/
+        {S1DREG_CRT_NDISP_VPER,         0x2B},  /* CRT/TV Vertical Non-Display Period Register*/
+        {S1DREG_CRT_VRTC_START,         0x09},  /* CRT/TV VRTC Start Position Register*/
+        {S1DREG_CRT_VRTC_PWIDTH,        0x01},  /* CRT/TV VRTC Pulse Width Register*/
+        {S1DREG_TV_OUT_CTL,             0x18},  /* TV Output Control Register */
+        {S1DREG_CRT_DISP_MODE,          0x05},  /* CRT/TV Display Mode Register, 16BPP*/
+        {S1DREG_CRT_DISP_START0,        0x00},  /* CRT/TV Display Start Address Register 0*/
+        {S1DREG_CRT_DISP_START1,        0x00},  /* CRT/TV Display Start Address Register 1*/
+        {S1DREG_CRT_DISP_START2,        0x00},  /* CRT/TV Display Start Address Register 2*/
+        {S1DREG_CRT_MEM_OFF0,           0x80},  /* CRT/TV Memory Address Offset Register 0*/
+        {S1DREG_CRT_MEM_OFF1,           0x02},  /* CRT/TV Memory Address Offset Register 1*/
+        {S1DREG_CRT_PIX_PAN,            0x00},  /* CRT/TV Pixel Panning Register*/
+        {S1DREG_CRT_DISP_FIFO_HTC,      0x00},  /* CRT/TV Display FIFO High Threshold Control Register*/
+        {S1DREG_CRT_DISP_FIFO_LTC,      0x00},  /* CRT/TV Display FIFO Low Threshold Control Register*/
+        {S1DREG_LCD_CUR_CTL,            0x00},  /* LCD Ink/Cursor Control Register*/
+        {S1DREG_LCD_CUR_START,          0x01},  /* LCD Ink/Cursor Start Address Register*/
+        {S1DREG_LCD_CUR_XPOS0,          0x00},  /* LCD Cursor X Position Register 0*/
+        {S1DREG_LCD_CUR_XPOS1,          0x00},  /* LCD Cursor X Position Register 1*/
+        {S1DREG_LCD_CUR_YPOS0,          0x00},  /* LCD Cursor Y Position Register 0*/
+        {S1DREG_LCD_CUR_YPOS1,          0x00},  /* LCD Cursor Y Position Register 1*/
+        {S1DREG_LCD_CUR_BCTL0,          0x00},  /* LCD Ink/Cursor Blue Color 0 Register*/
+        {S1DREG_LCD_CUR_GCTL0,          0x00},  /* LCD Ink/Cursor Green Color 0 Register*/
+        {S1DREG_LCD_CUR_RCTL0,          0x00},  /* LCD Ink/Cursor Red Color 0 Register*/
+        {S1DREG_LCD_CUR_BCTL1,          0x1F},  /* LCD Ink/Cursor Blue Color 1 Register*/
+        {S1DREG_LCD_CUR_GCTL1,          0x3F},  /* LCD Ink/Cursor Green Color 1 Register*/
+        {S1DREG_LCD_CUR_RCTL1,          0x1F},  /* LCD Ink/Cursor Red Color 1 Register*/
+        {S1DREG_LCD_CUR_FIFO_HTC,       0x00},  /* LCD Ink/Cursor FIFO Threshold Register*/
+        {S1DREG_CRT_CUR_CTL,            0x00},  /* CRT/TV Ink/Cursor Control Register*/
+        {S1DREG_CRT_CUR_START,          0x01},  /* CRT/TV Ink/Cursor Start Address Register*/
+        {S1DREG_CRT_CUR_XPOS0,          0x00},  /* CRT/TV Cursor X Position Register 0*/
+        {S1DREG_CRT_CUR_XPOS1,          0x00},  /* CRT/TV Cursor X Position Register 1*/
+        {S1DREG_CRT_CUR_YPOS0,          0x00},  /* CRT/TV Cursor Y Position Register 0*/
+        {S1DREG_CRT_CUR_YPOS1,          0x00},  /* CRT/TV Cursor Y Position Register 1*/
+        {S1DREG_CRT_CUR_BCTL0,          0x00},  /* CRT/TV Ink/Cursor Blue Color 0 Register*/
+        {S1DREG_CRT_CUR_GCTL0,          0x00},  /* CRT/TV Ink/Cursor Green Color 0 Register*/
+        {S1DREG_CRT_CUR_RCTL0,          0x00},  /* CRT/TV Ink/Cursor Red Color 0 Register*/
+        {S1DREG_CRT_CUR_BCTL1,          0x1F},  /* CRT/TV Ink/Cursor Blue Color 1 Register*/
+        {S1DREG_CRT_CUR_GCTL1,          0x3F},  /* CRT/TV Ink/Cursor Green Color 1 Register*/
+        {S1DREG_CRT_CUR_RCTL1,          0x1F},  /* CRT/TV Ink/Cursor Red Color 1 Register*/
+        {S1DREG_CRT_CUR_FIFO_HTC,       0x00},  /* CRT/TV Ink/Cursor FIFO Threshold Register*/
+        {S1DREG_BBLT_CTL0,              0x00},  /* BitBlt Control Register 0*/
+        {S1DREG_BBLT_CTL1,              0x01},  /* BitBlt Control Register 1*/
+        {S1DREG_BBLT_CC_EXP,            0x00},  /* BitBlt ROP Code/Color Expansion Register*/
+        {S1DREG_BBLT_OP,                0x00},  /* BitBlt Operation Register*/
+        {S1DREG_BBLT_SRC_START0,        0x00},  /* BitBlt Source Start Address Register 0*/
+        {S1DREG_BBLT_SRC_START1,        0x00},  /* BitBlt Source Start Address Register 1*/
+        {S1DREG_BBLT_SRC_START2,        0x00},  /* BitBlt Source Start Address Register 2*/
+        {S1DREG_BBLT_DST_START0,        0x00},  /* BitBlt Destination Start Address Register 0*/
+        {S1DREG_BBLT_DST_START1,        0x00},  /* BitBlt Destination Start Address Register 1*/
+        {S1DREG_BBLT_DST_START2,        0x00},  /* BitBlt Destination Start Address Register 2*/
+        {S1DREG_BBLT_MEM_OFF0,          0x00},  /* BitBlt Memory Address Offset Register 0*/
+        {S1DREG_BBLT_MEM_OFF1,          0x00},  /* BitBlt Memory Address Offset Register 1*/
+        {S1DREG_BBLT_WIDTH0,            0x00},  /* BitBlt Width Register 0*/
+        {S1DREG_BBLT_WIDTH1,            0x00},  /* BitBlt Width Register 1*/
+        {S1DREG_BBLT_HEIGHT0,           0x00},  /* BitBlt Height Register 0*/
+        {S1DREG_BBLT_HEIGHT1,           0x00},  /* BitBlt Height Register 1*/
+        {S1DREG_BBLT_BGC0,              0x00},  /* BitBlt Background Color Register 0*/
+        {S1DREG_BBLT_BGC1,              0x00},  /* BitBlt Background Color Register 1*/
+        {S1DREG_BBLT_FGC0,              0x00},  /* BitBlt Foreground Color Register 0*/
+        {S1DREG_BBLT_FGC1,              0x00},  /* BitBlt Foreground Color Register 1*/
+        {S1DREG_LKUP_MODE,              0x00},  /* Look-Up Table Mode Register*/
+        {S1DREG_LKUP_ADDR,              0x00},  /* Look-Up Table Address Register*/
+        {S1DREG_PS_CNF,                 0x00},  /* Power Save Configuration Register*/
+        {S1DREG_PS_STATUS,              0x00},  /* Power Save Status Register*/
+        {S1DREG_CPU2MEM_WDOGT,          0x00},  /* CPU-to-Memory Access Watchdog Timer Register*/
+        {S1DREG_COM_DISP_MODE,          0x01},  /* Display Mode Register, LCD only*/
 };
 
-static u64 s1dfb_dmamask = 0xffffffffUL;
+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
 
-static struct s1d13xxxfb_pdata yl_9200_s1dfb_pdata = {
-                .initregs                               = yl_9200_s1dfb_initregs,
-                .initregssize                   = ARRAY_SIZE(yl_9200_s1dfb_initregs),
-                .platform_init_video    = yl_9200_init_video,
+static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
+        .initregs               = yl9200_s1dfb_initregs,
+        .initregssize           = ARRAY_SIZE(yl9200_s1dfb_initregs),
+        .platform_init_video    = yl9200_init_video,
 };
 
-static struct resource yl_9200_s1dfb_resource[] = {
+static struct resource yl9200_s1dfb_resource[] = {
         [0] = { /* video mem */
-                .name   = "s1d13xxxfb memory",
-        /*      .name   = "s1d13806 memory",*/
-                .start  = AT91_FB_VMEM_BASE,
-                .end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-                .flags  = IORESOURCE_MEM,
+                .name   = "s1d13xxxfb memory",
+                .start  = AT91_FB_VMEM_BASE,
+                .end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
+                .flags  = IORESOURCE_MEM,
         },
         [1] = { /* video registers */
-                .name   = "s1d13xxxfb registers",
-        /*      .name   = "s1d13806 registers",*/
-                .start  = AT91_FB_REG_BASE,
-                .end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-                .flags  = IORESOURCE_MEM,
+                .name   = "s1d13xxxfb registers",
+                .start  = AT91_FB_REG_BASE,
+                .end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
+                .flags  = IORESOURCE_MEM,
         },
 };
 
-static struct platform_device yl_9200_s1dfb_device = {
-        /*TODO S.Birtles , really we need the chip revision in here as well*/
-                .name           = "s1d13806fb",
-        /*  .name               = "s1d13506fb",*/
-                .id                     = -1,
-                .dev            = {
-        /*TODO theres a waring here!!*/
-        /*WARNING: vmlinux.o(.data+0x2dbc): Section mismatch: reference to .init.text: (between 'yl_9200_s1dfb_pdata' and 's1dfb_dmamask')*/
+static struct platform_device yl9200_s1dfb_device = {
+        .name           = "s1d13806fb",
+        .id             = -1,
+        .dev    = {
                 .dma_mask               = &s1dfb_dmamask,
-                .coherent_dma_mask      = 0xffffffff,
-                .platform_data          = &yl_9200_s1dfb_pdata,
+                .coherent_dma_mask      = DMA_BIT_MASK(32),
+                .platform_data          = &yl9200_s1dfb_pdata,
         },
-        .resource       = yl_9200_s1dfb_resource,
-        .num_resources  = ARRAY_SIZE(yl_9200_s1dfb_resource),
+        .resource       = yl9200_s1dfb_resource,
+        .num_resources  = ARRAY_SIZE(yl9200_s1dfb_resource),
 };
 
-void __init yl_9200_add_device_video(void)
+void __init yl9200_add_device_video(void)
 {
-        platform_device_register(&yl_9200_s1dfb_device);
+        platform_device_register(&yl9200_s1dfb_device);
 }
 #else
-        void __init yl_9200_add_device_video(void) {}
+void __init yl9200_add_device_video(void) {}
 #endif
 
-/*this is not called first , yl_9200_map_io is called first*/
-static void __init yl_9200_board_init(void)
+
+static void __init yl9200_board_init(void)
 {
         /* Serial */
         at91_add_device_serial();
         /* Ethernet */
-        at91_add_device_eth(&yl_9200_eth_data);
+        at91_add_device_eth(&yl9200_eth_data);
         /* USB Host */
-        at91_add_device_usbh(&yl_9200_usbh_data);
+        at91_add_device_usbh(&yl9200_usbh_data);
         /* USB Device */
-        at91_add_device_udc(&yl_9200_udc_data);
-        /* pullup_pin it is  actually active low, but this is not needed, driver sets it up */
-        /*at91_set_multi_drive(yl_9200_udc_data.pullup_pin, 0);*/
-
-        /* Compact Flash */
-        /*at91_add_device_cf(&yl_9200_cf_data);*/
-
+        at91_add_device_udc(&yl9200_udc_data);
         /* I2C */
-        at91_add_device_i2c(yl_9200_i2c_devices, ARRAY_SIZE(yl_9200_i2c_devices));
-        /* SPI */
-        /*TODO YL9200 we have 2 spi interfaces touch screen & CAN*/
-        /* AT91_PIN_PA5, AT91_PIN_PA6 , are used on the  max 485 NOT SPI*/
-
-        /*touch screen and CAN*/
-        at91_add_device_spi(yl_9200_spi_devices, ARRAY_SIZE(yl_9200_spi_devices));
-
-        /*Basically the  TS uses  PB11 & PB10 , PB11 is configured by the SPI system BP10 IS NOT USED!!*/
-        /* we need this incase the board is running without a touch screen*/
-        #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-        at91_init_device_ts(); /*init the touch screen device*/
-        #endif
-        /* DataFlash card */
-        at91_add_device_mmc(0, &yl_9200_mmc_data);
+        at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
+        /* MMC */
+        at91_add_device_mmc(0, &yl9200_mmc_data);
         /* NAND */
-        at91_add_device_nand(&yl_9200_nand_data);
+        at91_add_device_nand(&yl9200_nand_data);
         /* NOR Flash */
-        platform_device_register(&yl_9200_flash);
-        /* LEDs. Note!! this does not include the led's we passed for the processor status */
-        at91_gpio_leds(yl_9200_leds, ARRAY_SIZE(yl_9200_leds));
-        /* VGA  */
-        /*this is self registered by including the s1d13xxx chip in the kernel build*/
-        yl_9200_add_device_video();
+        platform_device_register(&yl9200_flash);
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+        /* SPI */
+        at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
+        /* Touchscreen */
+        yl9200_add_device_ts();
+#endif
+        /* LEDs. */
+        at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
         /* Push Buttons */
-        yl_9200_add_device_buttons();
-        /*TODO fixup the Sounder */
-//      yl_9200_add_device_sounder(yl_9200_sounder,ARRAY_SIZE(yl_9200_sounder));
-
+        yl9200_add_device_buttons();
+        /* VGA */
+        yl9200_add_device_video();
 }
 
 MACHINE_START(YL9200, "uCdragon YL-9200")
-        /* Maintainer: S.Birtles*/
-        .phys_io                = AT91_BASE_SYS,
+        /* Maintainer: S.Birtles */
+        .phys_io        = AT91_BASE_SYS,
         .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
         .boot_params    = AT91_SDRAM_BASE + 0x100,
-        .timer                  = &at91rm9200_timer,
-        .map_io                 = yl_9200_map_io,
-        .init_irq               = yl_9200_init_irq,
-        .init_machine   = yl_9200_board_init,
+        .timer          = &at91rm9200_timer,
+        .map_io         = yl9200_map_io,
+        .init_irq       = yl9200_init_irq,
+        .init_machine   = yl9200_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index a33dfe450726..464bdbbf74df 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -112,12 +112,34 @@ static void pmc_sys_mode(struct clk *clk, int is_on)
                 at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
 }
 
+static void pmc_uckr_mode(struct clk *clk, int is_on)
+{
+        unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
+
+        if (is_on) {
+                is_on = AT91_PMC_LOCKU;
+                at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
+        } else
+                at91_sys_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
+
+        do {
+                cpu_relax();
+        } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
+}
+
 /* USB function clocks (PLLB must be 48 MHz) */
 static struct clk udpck = {
         .name           = "udpck",
         .parent         = &pllb,
         .mode           = pmc_sys_mode,
 };
+static struct clk utmi_clk = {
+        .name           = "utmi_clk",
+        .parent         = &main_clk,
+        .pmc_mask       = AT91_PMC_UPLLEN,      /* in CKGR_UCKR */
+        .mode           = pmc_uckr_mode,
+        .type           = CLK_TYPE_PLL,
+};
 static struct clk uhpck = {
         .name           = "uhpck",
         .parent         = &pllb,
@@ -361,7 +383,7 @@ static void __init init_programmable_clock(struct clk *clk)
 
 static int at91_clk_show(struct seq_file *s, void *unused)
 {
-        u32             scsr, pcsr, sr;
+        u32             scsr, pcsr, uckr = 0, sr;
         struct clk      *clk;
 
         seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
@@ -369,7 +391,10 @@ static int at91_clk_show(struct seq_file *s, void *unused)
         seq_printf(s, "MOR  = %8x\n", at91_sys_read(AT91_CKGR_MOR));
         seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
         seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
-        seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+        if (!cpu_is_at91sam9rl())
+                seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+        if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+                seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
         seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
         seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
 
@@ -382,6 +407,8 @@ static int at91_clk_show(struct seq_file *s, void *unused)
                         state = (scsr & clk->pmc_mask) ? "on" : "off";
                 else if (clk->mode == pmc_periph_mode)
                         state = (pcsr & clk->pmc_mask) ? "on" : "off";
+                else if (clk->mode == pmc_uckr_mode)
+                        state = (uckr & clk->pmc_mask) ? "on" : "off";
                 else if (clk->pmc_mask)
                         state = (sr & clk->pmc_mask) ? "on" : "off";
                 else if (clk == &clk32k || clk == &main_clk)
@@ -488,14 +515,19 @@ static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
                 /*
                  * PLL input between 1MHz and 32MHz per spec, but lower
                  * frequences seem necessary in some cases so allow 100K.
+                 * Warning: some newer products need 2MHz min.
                  */
                 input = main_freq / i;
+                if (cpu_is_at91sam9g20() && input < 2000000)
+                        continue;
                 if (input < 100000)
                         continue;
                 if (input > 32000000)
                         continue;
 
                 mul1 = out_freq / input;
+                if (cpu_is_at91sam9g20() && mul > 63)
+                        continue;
                 if (mul1 > 2048)
                         continue;
                 if (mul1 < 2)
@@ -555,7 +587,8 @@ int __init at91_clock_init(unsigned long main_clock)
 
         /* report if PLLA is more than mildly overclocked */
         plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
-        if (plla.rate_hz > 209000000)
+        if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
+           || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
                 pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
         /*
@@ -570,7 +603,7 @@ int __init at91_clock_init(unsigned long main_clock)
                 uhpck.pmc_mask = AT91RM9200_PMC_UHP;
                 udpck.pmc_mask = AT91RM9200_PMC_UDP;
                 at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-        } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
+        } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
                 uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
                 udpck.pmc_mask = AT91SAM926x_PMC_UDP;
         } else if (cpu_is_at91cap9()) {
@@ -582,6 +615,17 @@ int __init at91_clock_init(unsigned long main_clock)
         uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
 
         /*
+         * USB HS clock init
+         */
+        if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+                /*
+                 * multiplier is hard-wired to 40
+                 * (obtain the USB High Speed 480 MHz when input is 12 MHz)
+                 */
+                utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
+        }
+
+        /*
          * MCK and CPU derive from one of those primary clocks.
          * For now, assume this parentage won't change.
          */
@@ -591,13 +635,21 @@ int __init at91_clock_init(unsigned long main_clock)
         freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));                           /* prescale */
         if (cpu_is_at91rm9200())
                 mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));       /* mdiv */
-        else
-                mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
+        else if (cpu_is_at91sam9g20()) {
+                mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
+                        freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;    /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
+                if (mckr & AT91_PMC_PDIV)
+                        freq /= 2;              /* processor clock division */
+        } else
+                mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
 
         /* Register the PMC's standard clocks */
         for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
                 list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
 
+        if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+                list_add_tail(&utmi_clk.node, &clocks);
+
         /* MCK and CPU clock are "always on" */
         clk_enable(&mck);
 
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index aa863c157708..8ab4feb1ec5b 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -202,7 +202,7 @@ static int at91_pm_verify_clocks(void)
                         pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
                         return 0;
                 }
-        } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
+        } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
                 if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
                         pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
                         return 0;
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 9d7515c36bff..f62c35500bb7 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -74,6 +74,7 @@ struct clk *clk_get(struct device *dev, const char *id)
 
         return ERR_PTR(-ENOENT);
 }
+EXPORT_SYMBOL(clk_get);
 
 int clk_enable(struct clk *clk)
 {
@@ -86,6 +87,7 @@ int clk_enable(struct clk *clk)
 
         return 0;
 }
+EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
@@ -96,15 +98,18 @@ void clk_disable(struct clk *clk)
                 __raw_writel(value & ~clk->enable_mask, clk->enable_reg);
         }
 }
+EXPORT_SYMBOL(clk_disable);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
         return clk->rate;
 }
+EXPORT_SYMBOL(clk_get_rate);
 
 void clk_put(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_put);
 
 
 
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 0694ad6b6476..32f8609e4f85 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -14,12 +14,10 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
 pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
 
-leds-$(CONFIG_ARCH_CO285) += ebsa285-leds.o
 leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
 leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
 
 obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
-obj-$(CONFIG_ARCH_CO285) += co285.o dc21285-timer.o
 obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
 obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
 obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
diff --git a/arch/arm/mach-footbridge/co285.c b/arch/arm/mach-footbridge/co285.c
deleted file mode 100644
index 4545576ad8d9..000000000000
--- a/arch/arm/mach-footbridge/co285.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/co285.c
- *
- * CO285 machine fixup
- */
-#include <linux/init.h>
-
-#include <asm/hardware/dec21285.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-static void __init
-fixup_coebsa285(struct machine_desc *desc, struct tag *tags,
-                char **cmdline, struct meminfo *mi)
-{
-        extern unsigned long boot_memory_end;
-        extern char boot_command_line[];
-
-        mi->nr_banks      = 1;
-        mi->bank[0].start = PHYS_OFFSET;
-        mi->bank[0].size  = boot_memory_end;
-        mi->bank[0].node  = 0;
-
-        *cmdline = boot_command_line;
-}
-
-MACHINE_START(CO285, "co-EBSA285")
-        /* Maintainer: Mark van Doesburg */
-        .phys_io        = DC21285_ARMCSR_BASE,
-        .io_pg_offst    = ((0x7cf00000) >> 18) & 0xfffc,
-        .fixup          = fixup_coebsa285,
-        .map_io         = footbridge_map_io,
-        .init_irq       = footbridge_init_irq,
-        .timer          = &footbridge_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index ef29fc34ce65..b08ab507c052 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -177,25 +177,6 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = {
 #endif
 };
 
-/*
- * The CO-ebsa285 mapping.
- */
-static struct map_desc co285_io_desc[] __initdata = {
-#ifdef CONFIG_ARCH_CO285
-        {
-                .virtual        = PCIO_BASE,
-                .pfn            = __phys_to_pfn(DC21285_PCI_IO),
-                .length         = PCIO_SIZE,
-                .type           = MT_DEVICE,
-        }, {
-                .virtual        = PCIMEM_BASE,
-                .pfn            = __phys_to_pfn(DC21285_PCI_MEM),
-                .length         = PCIMEM_SIZE,
-                .type           = MT_DEVICE,
-        },
-#endif
-};
-
 void __init footbridge_map_io(void)
 {
         /*
@@ -208,8 +189,6 @@ void __init footbridge_map_io(void)
          * Now, work out what we've got to map in addition on this
          * platform.
          */
-        if (machine_is_co285())
-                iotable_init(co285_io_desc, ARRAY_SIZE(co285_io_desc));
         if (footbridge_cfn_mode())
                 iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
 }
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
index a64e22226515..09c1fbc51876 100644
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ b/arch/arm/mach-footbridge/ebsa285-leds.c
@@ -128,7 +128,7 @@ static void ebsa285_leds_event(led_event_t evt)
 
 static int __init leds_init(void)
 {
-        if (machine_is_ebsa285() || machine_is_co285())
+        if (machine_is_ebsa285())
                 leds_event = ebsa285_leds_event;
 
         leds_event(led_start);
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index 5d02e95dede3..d5cfcda385d6 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -115,8 +115,7 @@ static int set_isa_cmos_time(void)
 
 void __init isa_rtc_init(void)
 {
-        if (machine_is_co285() ||
-            machine_is_personal_server())
+        if (machine_is_personal_server())
                 /*
                  * Add-in 21285s shouldn't access the RTC
                  */
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 88d5e61a2e13..b047c7e795a9 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y                   += irq.o time.o dma.o generic.o
+obj-y                   += irq.o time.o dma.o generic.o clock.o
 
 obj-$(CONFIG_CPU_FREQ_IMX)      += cpufreq.o
 
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
new file mode 100644
index 000000000000..6a90fe5578df
--- /dev/null
+++ b/arch/arm/mach-imx/clock.c
@@ -0,0 +1,205 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/math64.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+
+/*
+ * Very simple approach: We can't disable clocks, so we do
+ * not need refcounting
+ */
+
+struct clk {
+        struct list_head node;
+        const char *name;
+        unsigned long (*get_rate)(void);
+};
+
+/*
+ *  get the system pll clock in Hz
+ *
+ *                  mfi + mfn / (mfd +1)
+ *  f = 2 * f_ref * --------------------
+ *                        pd + 1
+ */
+static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
+{
+        unsigned long long ll;
+        unsigned long quot;
+
+        u32 mfi = (pll >> 10) & 0xf;
+        u32 mfn = pll & 0x3ff;
+        u32 mfd = (pll >> 16) & 0x3ff;
+        u32 pd =  (pll >> 26) & 0xf;
+
+        mfi = mfi <= 5 ? 5 : mfi;
+
+        ll = 2 * (unsigned long long)f_ref *
+                ((mfi << 16) + (mfn << 16) / (mfd + 1));
+        quot = (pd + 1) * (1 << 16);
+        ll += quot / 2;
+        do_div(ll, quot);
+        return (unsigned long)ll;
+}
+
+static unsigned long imx_get_system_clk(void)
+{
+        u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
+
+        return imx_decode_pll(SPCTL0, f_ref);
+}
+
+static unsigned long imx_get_mcu_clk(void)
+{
+        return imx_decode_pll(MPCTL0, CLK32 * 512);
+}
+
+/*
+ *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
+ */
+static unsigned long imx_get_perclk1(void)
+{
+        return imx_get_system_clk() / (((PCDR) & 0xf)+1);
+}
+
+/*
+ *  get peripheral clock 2 ( LCD, SD, SPI[12] )
+ */
+static unsigned long imx_get_perclk2(void)
+{
+        return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
+}
+
+/*
+ *  get peripheral clock 3 ( SSI )
+ */
+static unsigned long imx_get_perclk3(void)
+{
+        return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
+}
+
+/*
+ *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
+ */
+static unsigned long imx_get_hclk(void)
+{
+        return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
+}
+
+static struct clk clk_system_clk = {
+        .name = "system_clk",
+        .get_rate = imx_get_system_clk,
+};
+
+static struct clk clk_hclk = {
+        .name = "hclk",
+        .get_rate = imx_get_hclk,
+};
+
+static struct clk clk_mcu_clk = {
+        .name = "mcu_clk",
+        .get_rate = imx_get_mcu_clk,
+};
+
+static struct clk clk_perclk1 = {
+        .name = "perclk1",
+        .get_rate = imx_get_perclk1,
+};
+
+static struct clk clk_uart_clk = {
+        .name = "uart_clk",
+        .get_rate = imx_get_perclk1,
+};
+
+static struct clk clk_perclk2 = {
+        .name = "perclk2",
+        .get_rate = imx_get_perclk2,
+};
+
+static struct clk clk_perclk3 = {
+        .name = "perclk3",
+        .get_rate = imx_get_perclk3,
+};
+
+static struct clk *clks[] = {
+        &clk_perclk1,
+        &clk_perclk2,
+        &clk_perclk3,
+        &clk_system_clk,
+        &clk_hclk,
+        &clk_mcu_clk,
+        &clk_uart_clk,
+};
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+        struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+        mutex_lock(&clocks_mutex);
+        list_for_each_entry(p, &clocks, node) {
+                if (!strcmp(p->name, id)) {
+                        clk = p;
+                        goto found;
+                }
+        }
+
+found:
+        mutex_unlock(&clocks_mutex);
+
+        return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+}
+
+int clk_enable(struct clk *clk)
+{
+        return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+        return clk->get_rate();
+}
+
+int imx_clocks_init(void)
+{
+        int i;
+
+        mutex_lock(&clocks_mutex);
+        for (i = 0; i < ARRAY_SIZE(clks); i++)
+                list_add(&clks[i]->node, &clocks);
+        mutex_unlock(&clocks_mutex);
+
+        return 0;
+}
+
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index e548ba74a4d2..be0809b33e08 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -32,6 +32,8 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <asm/system.h>
 
 #include <asm/hardware.h>
@@ -52,6 +54,8 @@
 static u32 mpctl0_at_boot;
 static u32 bclk_div_at_boot;
 
+static struct clk *system_clk, *mcu_clk;
+
 static void imx_set_async_mode(void)
 {
         adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
@@ -160,10 +164,10 @@ static unsigned int imx_get_speed(unsigned int cpu)
         cr = get_cr();
 
         if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
-                freq = imx_get_system_clk();
+                freq = clk_get_rate(system_clk);
                 freq = (freq + bclk_div/2) / bclk_div;
         } else {
-                freq = imx_get_mcu_clk();
+                freq = clk_get_rate(mcu_clk);
                 if (cscr & CSCR_MPU_PRESC)
                         freq /= 2;
         }
@@ -201,7 +205,7 @@ static int imx_set_target(struct cpufreq_policy *policy,
         pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
                         freq, mpctl0_at_boot);
 
-        sysclk = imx_get_system_clk();
+        sysclk = clk_get_rate(system_clk);
 
         if (freq > sysclk / bclk_div_at_boot + 1000000) {
                 freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
@@ -290,6 +294,16 @@ static int __init imx_cpufreq_init(void)
         bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
         mpctl0_at_boot = 0;
 
+        system_clk = clk_get(NULL, "system_clk");
+        if (IS_ERR(system_clk))
+                return PTR_ERR(system_clk);
+
+        mcu_clk = clk_get(NULL, "mcu_clk");
+        if (IS_ERR(mcu_clk)) {
+                clk_put(system_clk);
+                return PTR_ERR(mcu_clk);
+        }
+
         if((CSCR & CSCR_MPEN) &&
            ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
                 mpctl0_at_boot = MPCTL0;
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index a59ff2987cb7..ee1c6f06ff64 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -410,7 +410,6 @@ void imx_dma_free(imx_dmach_t dma_ch)
 
 /**
  * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @dma_ch: i.MX DMA channel number
  * @name: the driver/caller own non-%NULL identification
  * @prio: one of the hardware distinguished priority level:
  *        %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
@@ -420,11 +419,9 @@ void imx_dma_free(imx_dmach_t dma_ch)
  * in the higher and then even lower priority groups.
  *
  * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- *               Zero value indicates successful channel allocation.
+ *               On successful allocation channel is returned.
  */
-int
-imx_dma_request_by_prio(imx_dmach_t * pdma_ch, const char *name,
-                        imx_dma_prio prio)
+imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
 {
         int i;
         int best;
@@ -444,15 +441,13 @@ imx_dma_request_by_prio(imx_dmach_t * pdma_ch, const char *name,
 
         for (i = best; i < IMX_DMA_CHANNELS; i++) {
                 if (!imx_dma_request(i, name)) {
-                        *pdma_ch = i;
-                        return 0;
+                        return i;
                 }
         }
 
         for (i = best - 1; i >= 0; i--) {
                 if (!imx_dma_request(i, name)) {
-                        *pdma_ch = i;
-                        return 0;
+                        return i;
                 }
         }
 
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 4cfc9d3af28a..98ddd8a6d05f 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -214,82 +214,6 @@ int imx_irq_to_gpio(unsigned irq)
 
 EXPORT_SYMBOL(imx_irq_to_gpio);
 
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned int imx_decode_pll(unsigned int pll, u32 f_ref)
-{
-        unsigned long long ll;
-        unsigned long quot;
-
-        u32 mfi = (pll >> 10) & 0xf;
-        u32 mfn = pll & 0x3ff;
-        u32 mfd = (pll >> 16) & 0x3ff;
-        u32 pd =  (pll >> 26) & 0xf;
-
-        mfi = mfi <= 5 ? 5 : mfi;
-
-        ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
-        quot = (pd+1) * (1<<16);
-        ll += quot / 2;
-        do_div(ll, quot);
-        return (unsigned int) ll;
-}
-
-unsigned int imx_get_system_clk(void)
-{
-        u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
-        return imx_decode_pll(SPCTL0, f_ref);
-}
-EXPORT_SYMBOL(imx_get_system_clk);
-
-unsigned int imx_get_mcu_clk(void)
-{
-        return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-EXPORT_SYMBOL(imx_get_mcu_clk);
-
-/*
- *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-unsigned int imx_get_perclk1(void)
-{
-        return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-EXPORT_SYMBOL(imx_get_perclk1);
-
-/*
- *  get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-unsigned int imx_get_perclk2(void)
-{
-        return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-EXPORT_SYMBOL(imx_get_perclk2);
-
-/*
- *  get peripheral clock 3 ( SSI )
- */
-unsigned int imx_get_perclk3(void)
-{
-        return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-EXPORT_SYMBOL(imx_get_perclk3);
-
-/*
- *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-unsigned int imx_get_hclk(void)
-{
-        return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-EXPORT_SYMBOL(imx_get_hclk);
-
 static struct resource imx_mmc_resources[] = {
         [0] = {
                 .start  = 0x00214000,
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index a9778c1587ab..9635d5812bcd 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -69,6 +69,11 @@ static struct resource imx_uart1_resources[] = {
                 .end    = (UART1_MINT_TX),
                 .flags  = IORESOURCE_IRQ,
         },
+        [3] = {
+                .start  = UART1_MINT_RTS,
+                .end    = UART1_MINT_RTS,
+                .flags  = IORESOURCE_IRQ,
+        },
 };
 
 static struct platform_device imx_uart1_device = {
@@ -97,6 +102,11 @@ static struct resource imx_uart2_resources[] = {
                 .end    = (UART2_MINT_TX),
                 .flags  = IORESOURCE_IRQ,
         },
+        [3] = {
+                .start  = UART2_MINT_RTS,
+                .end    = UART2_MINT_RTS,
+                .flags  = IORESOURCE_IRQ,
+        },
 };
 
 static struct platform_device imx_uart2_device = {
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index d86d124aea22..5a41e96e8586 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -17,6 +17,7 @@
 #include <linux/time.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -86,10 +87,10 @@ static struct clocksource clocksource_imx = {
         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static int __init imx_clocksource_init(void)
+static int __init imx_clocksource_init(unsigned long rate)
 {
         clocksource_imx.mult =
-                clocksource_hz2mult(imx_get_perclk1(), clocksource_imx.shift);
+                clocksource_hz2mult(rate, clocksource_imx.shift);
         clocksource_register(&clocksource_imx);
 
         return 0;
@@ -174,9 +175,9 @@ static struct clock_event_device clockevent_imx = {
         .rating         = 200,
 };
 
-static int __init imx_clockevent_init(void)
+static int __init imx_clockevent_init(unsigned long rate)
 {
-        clockevent_imx.mult = div_sc(imx_get_perclk1(), NSEC_PER_SEC,
+        clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
                                         clockevent_imx.shift);
         clockevent_imx.max_delta_ns =
                 clockevent_delta2ns(0xfffffffe, &clockevent_imx);
@@ -190,13 +191,23 @@ static int __init imx_clockevent_init(void)
         return 0;
 }
 
+extern int imx_clocks_init(void);
 
 static void __init imx_timer_init(void)
 {
+        struct clk *clk;
+        unsigned long rate;
+
+        imx_clocks_init();
+
+        clk = clk_get(NULL, "perclk1");
+        clk_enable(clk);
+        rate = clk_get_rate(clk);
+
         imx_timer_hardware_init();
-        imx_clocksource_init();
+        imx_clocksource_init(rate);
 
-        imx_clockevent_init();
+        imx_clockevent_init(rate);
 
         /*
          * Make irqs happen for the system timer
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 158daaf9e3b0..6a5ef8d30b10 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y                                   := clock.o core.o lm.o time.o
+obj-y                                   := clock.o core.o lm.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)        += integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)        += integrator_cp.o
 
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 62e653a3ea1a..5a1588cf8242 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -393,9 +393,7 @@ static int impd1_probe(struct lm_device *dev)
                 if (!d)
                         continue;
 
-                snprintf(d->dev.bus_id, sizeof(d->dev.bus_id),
-                         "lm%x:%5.5lx", dev->id, idev->offset >> 12);
-
+                dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
                 d->dev.parent   = &dev->dev;
                 d->res.start    = dev->resource.start + idev->offset;
                 d->res.end      = d->res.start + SZ_4K - 1;
@@ -407,8 +405,7 @@ static int impd1_probe(struct lm_device *dev)
 
                 ret = amba_device_register(d, &dev->resource);
                 if (ret) {
-                        printk("unable to register device %s: %d\n",
-                                d->dev.bus_id, ret);
+                        dev_err(&d->dev, "unable to register device: %d\n");
                         kfree(d);
                 }
         }
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index 622cdc4212dd..f939c5091405 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -81,8 +81,10 @@ int lm_device_register(struct lm_device *dev)
         dev->dev.release = lm_device_release;
         dev->dev.bus = &lm_bustype;
 
-        snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), "lm%d", dev->id);
-        dev->resource.name = dev->dev.bus_id;
+        ret = dev_set_name(&dev->dev, "lm%d", dev->id);
+        if (ret)
+                return ret;
+        dev->resource.name = dev_name(&dev->dev);
 
         ret = request_resource(&iomem_resource, &dev->resource);
         if (ret == 0) {
diff --git a/arch/arm/mach-integrator/time.c b/arch/arm/mach-integrator/time.c
deleted file mode 100644
index 8508a0db3eaf..000000000000
--- a/arch/arm/mach-integrator/time.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/time.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/mc146818rtc.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/rtc.h>
-
-#include <asm/mach/time.h>
-
-#define RTC_DR          (0)
-#define RTC_MR          (4)
-#define RTC_STAT        (8)
-#define RTC_EOI         (8)
-#define RTC_LR          (12)
-#define RTC_CR          (16)
-#define RTC_CR_MIE      (1 << 0)
-
-extern int (*set_rtc)(void);
-static void __iomem *rtc_base;
-
-static int integrator_set_rtc(void)
-{
-        __raw_writel(xtime.tv_sec, rtc_base + RTC_LR);
-        return 1;
-}
-
-static int integrator_rtc_read_alarm(struct rtc_wkalrm *alrm)
-{
-        rtc_time_to_tm(readl(rtc_base + RTC_MR), &alrm->time);
-        return 0;
-}
-
-static inline int integrator_rtc_set_alarm(struct rtc_wkalrm *alrm)
-{
-        unsigned long time;
-        int ret;
-
-        /*
-         * At the moment, we can only deal with non-wildcarded alarm times.
-         */
-        ret = rtc_valid_tm(&alrm->time);
-        if (ret == 0)
-                ret = rtc_tm_to_time(&alrm->time, &time);
-        if (ret == 0)
-                writel(time, rtc_base + RTC_MR);
-        return ret;
-}
-
-static int integrator_rtc_read_time(struct rtc_time *tm)
-{
-        rtc_time_to_tm(readl(rtc_base + RTC_DR), tm);
-        return 0;
-}
-
-/*
- * Set the RTC time.  Unfortunately, we can't accurately set
- * the point at which the counter updates.
- *
- * Also, since RTC_LR is transferred to RTC_CR on next rising
- * edge of the 1Hz clock, we must write the time one second
- * in advance.
- */
-static inline int integrator_rtc_set_time(struct rtc_time *tm)
-{
-        unsigned long time;
-        int ret;
-
-        ret = rtc_tm_to_time(tm, &time);
-        if (ret == 0)
-                writel(time + 1, rtc_base + RTC_LR);
-
-        return ret;
-}
-
-static struct rtc_ops rtc_ops = {
-        .owner          = THIS_MODULE,
-        .read_time      = integrator_rtc_read_time,
-        .set_time       = integrator_rtc_set_time,
-        .read_alarm     = integrator_rtc_read_alarm,
-        .set_alarm      = integrator_rtc_set_alarm,
-};
-
-static irqreturn_t arm_rtc_interrupt(int irq, void *dev_id)
-{
-        writel(0, rtc_base + RTC_EOI);
-        return IRQ_HANDLED;
-}
-
-static int rtc_probe(struct amba_device *dev, void *id)
-{
-        int ret;
-
-        if (rtc_base)
-                return -EBUSY;
-
-        ret = amba_request_regions(dev, NULL);
-        if (ret)
-                goto out;
-
-        rtc_base = ioremap(dev->res.start, SZ_4K);
-        if (!rtc_base) {
-                ret = -ENOMEM;
-                goto res_out;
-        }
-
-        __raw_writel(0, rtc_base + RTC_CR);
-        __raw_writel(0, rtc_base + RTC_EOI);
-
-        xtime.tv_sec = __raw_readl(rtc_base + RTC_DR);
-
-        /* note that 'dev' is merely used for irq disambiguation;
-         * it is not actually referenced in the irq handler
-         */
-        ret = request_irq(dev->irq[0], arm_rtc_interrupt, IRQF_DISABLED,
-                          "rtc-pl030", dev);
-        if (ret)
-                goto map_out;
-
-        ret = register_rtc(&rtc_ops);
-        if (ret)
-                goto irq_out;
-
-        set_rtc = integrator_set_rtc;
-        return 0;
-
- irq_out:
-        free_irq(dev->irq[0], dev);
- map_out:
-        iounmap(rtc_base);
-        rtc_base = NULL;
- res_out:
-        amba_release_regions(dev);
- out:
-        return ret;
-}
-
-static int rtc_remove(struct amba_device *dev)
-{
-        set_rtc = NULL;
-
-        writel(0, rtc_base + RTC_CR);
-
-        free_irq(dev->irq[0], dev);
-        unregister_rtc(&rtc_ops);
-
-        iounmap(rtc_base);
-        rtc_base = NULL;
-        amba_release_regions(dev);
-
-        return 0;
-}
-
-static struct timespec rtc_delta;
-
-static int rtc_suspend(struct amba_device *dev, pm_message_t state)
-{
-        struct timespec rtc;
-
-        rtc.tv_sec = readl(rtc_base + RTC_DR);
-        rtc.tv_nsec = 0;
-        save_time_delta(&rtc_delta, &rtc);
-
-        return 0;
-}
-
-static int rtc_resume(struct amba_device *dev)
-{
-        struct timespec rtc;
-
-        rtc.tv_sec = readl(rtc_base + RTC_DR);
-        rtc.tv_nsec = 0;
-        restore_time_delta(&rtc_delta, &rtc);
-
-        return 0;
-}
-
-static struct amba_id rtc_ids[] = {
-        {
-                .id     = 0x00041030,
-                .mask   = 0x000fffff,
-        },
-        { 0, 0 },
-};
-
-static struct amba_driver rtc_driver = {
-        .drv            = {
-                .name   = "rtc-pl030",
-        },
-        .probe          = rtc_probe,
-        .remove         = rtc_remove,
-        .suspend        = rtc_suspend,
-        .resume         = rtc_resume,
-        .id_table       = rtc_ids,
-};
-
-static int __init integrator_rtc_init(void)
-{
-        return amba_driver_register(&rtc_driver);
-}
-
-static void __exit integrator_rtc_exit(void)
-{
-        amba_driver_unregister(&rtc_driver);
-}
-
-module_init(integrator_rtc_init);
-module_exit(integrator_rtc_exit);
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index e774447c0592..db8b5fe06c0d 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -125,6 +125,15 @@ config	ARCH_IXDP4XX
         depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
         default y
 
+config MACH_FSG
+        bool
+        prompt "Freecom FSG-3"
+        select PCI
+        help
+          Say 'Y' here if you want your kernel to support Freecom's
+          FSG-3 device. For more information on this platform,
+          see http://www.nslu2-linux.org/wiki/FSG3/HomePage
+
 #
 # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
 #
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index c1956882c48b..2e6bbf927a74 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
 obj-pci-$(CONFIG_MACH_DSMG600)          += dsmg600-pci.o
 obj-pci-$(CONFIG_MACH_GATEWAY7001)      += gateway7001-pci.o
 obj-pci-$(CONFIG_MACH_WG302V2)          += wg302v2-pci.o
+obj-pci-$(CONFIG_MACH_FSG)              += fsg-pci.o
 
 obj-y   += common.o
 
@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
 obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)  += gateway7001-setup.o
 obj-$(CONFIG_MACH_WG302V2)      += wg302v2-setup.o
+obj-$(CONFIG_MACH_FSG)          += fsg-setup.o
 
 obj-$(CONFIG_PCI)               += $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)       += ixp4xx_qmgr.o
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index f6d66dce6852..3781b3db9f49 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -326,11 +326,11 @@ static struct resource ixp4xx_udc_resources[] = {
 };
 
 /*
- * USB device controller. The IXP4xx uses the same controller as PXA2XX,
+ * USB device controller. The IXP4xx uses the same controller as PXA25X,
  * so we just use the same device.
  */
 static struct platform_device ixp4xx_udc_device = {
-        .name           = "pxa2xx-udc",
+        .name           = "pxa25x-udc",
         .id             = -1,
         .num_resources  = 2,
         .resource       = ixp4xx_udc_resources,
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
new file mode 100644
index 000000000000..f19f3f6feda1
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arch/mach-ixp4xx/fsg-pci.c
+ *
+ * FSG board-level PCI initialization
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainer: http://www.nslu2-linux.org/
+ *
+ * based on ixdp425-pci.c:
+ *      Copyright (C) 2002 Intel Corporation.
+ *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+void __init fsg_pci_preinit(void)
+{
+        set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
+        set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
+        set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
+
+        ixp4xx_pci_preinit();
+}
+
+static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
+                IRQ_FSG_PCI_INTC,
+                IRQ_FSG_PCI_INTB,
+                IRQ_FSG_PCI_INTA,
+        };
+
+        int irq = -1;
+        slot = slot - 11;
+
+        if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
+            pin >= 1 && pin <= FSG_PCI_IRQ_LINES)
+                irq = pci_irq_table[(slot - 1)];
+        printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
+               __func__, slot, pin, irq);
+
+        return irq;
+}
+
+struct hw_pci fsg_pci __initdata = {
+        .nr_controllers = 1,
+        .preinit =        fsg_pci_preinit,
+        .swizzle =        pci_std_swizzle,
+        .setup =          ixp4xx_setup,
+        .scan =           ixp4xx_scan_bus,
+        .map_irq =        fsg_map_irq,
+};
+
+int __init fsg_pci_init(void)
+{
+        if (machine_is_fsg())
+                pci_common_init(&fsg_pci);
+        return 0;
+}
+
+subsys_initcall(fsg_pci_init);
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
new file mode 100644
index 000000000000..0db3a909ae61
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -0,0 +1,276 @@
+/*
+ * arch/arm/mach-ixp4xx/fsg-setup.c
+ *
+ * FSG board-setup
+ *
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
+ *
+ * based on ixdp425-setup.c:
+ *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nslu2-power.c
+ *      Copyright (C) 2005 Tower Technologies
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ */
+
+#include <linux/if_ether.h>
+#include <linux/irq.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/reboot.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+static struct flash_platform_data fsg_flash_data = {
+        .map_name               = "cfi_probe",
+        .width                  = 2,
+};
+
+static struct resource fsg_flash_resource = {
+        .flags                  = IORESOURCE_MEM,
+};
+
+static struct platform_device fsg_flash = {
+        .name                   = "IXP4XX-Flash",
+        .id                     = 0,
+        .dev = {
+                .platform_data  = &fsg_flash_data,
+        },
+        .num_resources          = 1,
+        .resource               = &fsg_flash_resource,
+};
+
+static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
+        .sda_pin                = FSG_SDA_PIN,
+        .scl_pin                = FSG_SCL_PIN,
+};
+
+static struct platform_device fsg_i2c_gpio = {
+        .name                   = "i2c-gpio",
+        .id                     = 0,
+        .dev = {
+                .platform_data  = &fsg_i2c_gpio_data,
+        },
+};
+
+static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
+        {
+                I2C_BOARD_INFO("rtc-isl1208", 0x6f),
+        },
+};
+
+static struct resource fsg_uart_resources[] = {
+        {
+                .start          = IXP4XX_UART1_BASE_PHYS,
+                .end            = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+                .flags          = IORESOURCE_MEM,
+        },
+        {
+                .start          = IXP4XX_UART2_BASE_PHYS,
+                .end            = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+                .flags          = IORESOURCE_MEM,
+        }
+};
+
+static struct plat_serial8250_port fsg_uart_data[] = {
+        {
+                .mapbase        = IXP4XX_UART1_BASE_PHYS,
+                .membase        = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+                .irq            = IRQ_IXP4XX_UART1,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = IXP4XX_UART_XTAL,
+        },
+        {
+                .mapbase        = IXP4XX_UART2_BASE_PHYS,
+                .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+                .irq            = IRQ_IXP4XX_UART2,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = IXP4XX_UART_XTAL,
+        },
+        { }
+};
+
+static struct platform_device fsg_uart = {
+        .name                   = "serial8250",
+        .id                     = PLAT8250_DEV_PLATFORM,
+        .dev = {
+                .platform_data  = fsg_uart_data,
+        },
+        .num_resources          = ARRAY_SIZE(fsg_uart_resources),
+        .resource               = fsg_uart_resources,
+};
+
+static struct platform_device fsg_leds = {
+        .name           = "fsg-led",
+        .id             = -1,
+};
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info fsg_plat_eth[] = {
+        {
+                .phy            = 5,
+                .rxq            = 3,
+                .txreadyq       = 20,
+        }, {
+                .phy            = 4,
+                .rxq            = 4,
+                .txreadyq       = 21,
+        }
+};
+
+static struct platform_device fsg_eth[] = {
+        {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEB,
+                .dev = {
+                        .platform_data  = fsg_plat_eth,
+                },
+        }, {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEC,
+                .dev = {
+                        .platform_data  = fsg_plat_eth + 1,
+                },
+        }
+};
+
+static struct platform_device *fsg_devices[] __initdata = {
+        &fsg_i2c_gpio,
+        &fsg_flash,
+        &fsg_leds,
+        &fsg_eth[0],
+        &fsg_eth[1],
+};
+
+static irqreturn_t fsg_power_handler(int irq, void *dev_id)
+{
+        /* Signal init to do the ctrlaltdel action, this will bypass init if
+         * it hasn't started and do a kernel_restart.
+         */
+        ctrl_alt_del();
+
+        return IRQ_HANDLED;
+}
+
+static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
+{
+        /* This is the paper-clip reset which does an emergency reboot. */
+        printk(KERN_INFO "Restarting system.\n");
+        machine_restart(NULL);
+
+        /* This should never be reached. */
+        return IRQ_HANDLED;
+}
+
+static void __init fsg_init(void)
+{
+        DECLARE_MAC_BUF(mac_buf);
+        uint8_t __iomem *f;
+        int i;
+
+        ixp4xx_sys_init();
+
+        fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+        fsg_flash_resource.end =
+                IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+        *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+        *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+        /* Configure CS2 for operation, 8bit and writable */
+        *IXP4XX_EXP_CS2 = 0xbfff0002;
+
+        i2c_register_board_info(0, fsg_i2c_board_info,
+                                ARRAY_SIZE(fsg_i2c_board_info));
+
+        /* This is only useful on a modified machine, but it is valuable
+         * to have it first in order to see debug messages, and so that
+         * it does *not* get removed if platform_add_devices fails!
+         */
+        (void)platform_device_register(&fsg_uart);
+
+        platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
+
+        if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
+                        IRQF_DISABLED | IRQF_TRIGGER_LOW,
+                        "FSG reset button", NULL) < 0) {
+
+                printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+                        gpio_to_irq(FSG_RB_GPIO));
+        }
+
+        if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
+                        IRQF_DISABLED | IRQF_TRIGGER_LOW,
+                        "FSG power button", NULL) < 0) {
+
+                printk(KERN_DEBUG "Power Button IRQ %d not available\n",
+                        gpio_to_irq(FSG_SB_GPIO));
+        }
+
+        /*
+         * Map in a portion of the flash and read the MAC addresses.
+         * Since it is stored in BE in the flash itself, we need to
+         * byteswap it if we're in LE mode.
+         */
+        f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
+        if (f) {
+#ifdef __ARMEB__
+                for (i = 0; i < 6; i++) {
+                        fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
+                        fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
+                }
+#else
+
+                /*
+                  Endian-swapped reads from unaligned addresses are
+                  required to extract the two MACs from the big-endian
+                  Redboot config area in flash.
+                */
+
+                fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
+                fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
+                fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
+                fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
+                fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
+                fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);
+
+                fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
+                fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
+                fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
+                fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
+                fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
+                fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
+#endif
+                iounmap(f);
+        }
+        printk(KERN_INFO "FSG: Using MAC address %s for port 0\n",
+               print_mac(mac_buf, fsg_plat_eth[0].hwaddr));
+        printk(KERN_INFO "FSG: Using MAC address %s for port 1\n",
+               print_mac(mac_buf, fsg_plat_eth[1].hwaddr));
+
+}
+
+MACHINE_START(FSG, "Freecom FSG-3")
+        /* Maintainer: www.nslu2-linux.org */
+        .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
+        .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+        .map_io         = ixp4xx_map_io,
+        .init_irq       = ixp4xx_init_irq,
+        .timer          = &ixp4xx_timer,
+        .boot_params    = 0x0100,
+        .init_machine   = fsg_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
new file mode 100644
index 000000000000..3600cd9f0519
--- /dev/null
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -0,0 +1,25 @@
+if ARCH_KIRKWOOD
+
+menu "Marvell Kirkwood Implementations"
+
+config MACH_DB88F6281_BP
+        bool "Marvell DB-88F6281-BP Development Board"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell DB-88F6281-BP Development Board.
+
+config MACH_RD88F6192_NAS
+        bool "Marvell RD-88F6192-NAS Reference Board"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell RD-88F6192-NAS Reference Board.
+
+config MACH_RD88F6281
+        bool "Marvell RD-88F6281 Reference Board"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell RD-88F6281 Reference Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
new file mode 100644
index 000000000000..e14bf40bfb07
--- /dev/null
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -0,0 +1,5 @@
+obj-y                           += common.o addr-map.o irq.o pcie.o
+
+obj-$(CONFIG_MACH_DB88F6281_BP)         += db88f6281-bp-setup.o
+obj-$(CONFIG_MACH_RD88F6192_NAS)        += rd88f6192-nas-setup.o
+obj-$(CONFIG_MACH_RD88F6192_NAS)        += rd88f6281-setup.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y   := 0x00008000
+params_phys-y   := 0x00000100
+initrd_phys-y   := 0x00800000
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
new file mode 100644
index 000000000000..a39f0f3c4730
--- /dev/null
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -0,0 +1,139 @@
+/*
+ * arch/arm/mach-kirkwood/addr-map.c
+ *
+ * Address map functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/hardware.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR              0
+#define TARGET_DEV_BUS          1
+#define TARGET_PCIE             4
+#define ATTR_DEV_SPI_ROM        0x1e
+#define ATTR_DEV_BOOT           0x1d
+#define ATTR_DEV_NAND           0x2f
+#define ATTR_DEV_CS3            0x37
+#define ATTR_DEV_CS2            0x3b
+#define ATTR_DEV_CS1            0x3d
+#define ATTR_DEV_CS0            0x3e
+#define ATTR_PCIE_IO            0xe0
+#define ATTR_PCIE_MEM           0xe8
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_BASE_CS_OFF(n)      (0x0000 + ((n) << 3))
+#define DDR_SIZE_CS_OFF(n)      (0x0004 + ((n) << 3))
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_OFF(n)              (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
+#define WIN_CTRL_OFF            0x0000
+#define WIN_BASE_OFF            0x0004
+#define WIN_REMAP_LO_OFF        0x0008
+#define WIN_REMAP_HI_OFF        0x000c
+
+
+struct mbus_dram_target_info kirkwood_mbus_dram_info;
+
+static int __init cpu_win_can_remap(int win)
+{
+        if (win < 4)
+                return 1;
+
+        return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+                                 u8 target, u8 attr, int remap)
+{
+        void __iomem *addr = (void __iomem *)WIN_OFF(win);
+        u32 ctrl;
+
+        base &= 0xffff0000;
+        ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+        writel(base, addr + WIN_BASE_OFF);
+        writel(ctrl, addr + WIN_CTRL_OFF);
+        if (cpu_win_can_remap(win)) {
+                if (remap < 0)
+                        remap = base;
+
+                writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
+                writel(0, addr + WIN_REMAP_HI_OFF);
+        }
+}
+
+void __init kirkwood_setup_cpu_mbus(void)
+{
+        void __iomem *addr;
+        int i;
+        int cs;
+
+        /*
+         * First, disable and clear windows.
+         */
+        for (i = 0; i < 8; i++) {
+                addr = (void __iomem *)WIN_OFF(i);
+
+                writel(0, addr + WIN_BASE_OFF);
+                writel(0, addr + WIN_CTRL_OFF);
+                if (cpu_win_can_remap(i)) {
+                        writel(0, addr + WIN_REMAP_LO_OFF);
+                        writel(0, addr + WIN_REMAP_HI_OFF);
+                }
+        }
+
+        /*
+         * Setup windows for PCIe IO+MEM space.
+         */
+        setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
+                      TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
+        setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
+                      TARGET_PCIE, ATTR_PCIE_MEM, -1);
+
+        /*
+         * Setup window for NAND controller.
+         */
+        setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
+                      TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
+
+        /*
+         * Setup MBUS dram target info.
+         */
+        kirkwood_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+        addr = (void __iomem *)DDR_WINDOW_CPU_BASE;
+
+        for (i = 0, cs = 0; i < 4; i++) {
+                u32 base = readl(addr + DDR_BASE_CS_OFF(i));
+                u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+
+                /*
+                 * Chip select enabled?
+                 */
+                if (size & 1) {
+                        struct mbus_dram_window *w;
+
+                        w = &kirkwood_mbus_dram_info.cs[cs++];
+                        w->cs_index = i;
+                        w->mbus_attr = 0xf & ~(1 << i);
+                        w->base = base & 0xffff0000;
+                        w->size = (size | 0x0000ffff) + 1;
+                }
+        }
+        kirkwood_mbus_dram_info.num_cs = cs;
+}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
new file mode 100644
index 000000000000..5938a3b33cdc
--- /dev/null
+++ b/arch/arm/mach-kirkwood/common.c
@@ -0,0 +1,331 @@
+/*
+ * arch/arm/mach-kirkwood/common.c
+ *
+ * Core functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <asm/page.h>
+#include <asm/timex.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/plat-orion/cache-feroceon-l2.h>
+#include <asm/plat-orion/ehci-orion.h>
+#include <asm/plat-orion/orion_nand.h>
+#include <asm/plat-orion/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc kirkwood_io_desc[] __initdata = {
+        {
+                .virtual        = KIRKWOOD_PCIE_IO_VIRT_BASE,
+                .pfn            = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
+                .length         = KIRKWOOD_PCIE_IO_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = KIRKWOOD_REGS_VIRT_BASE,
+                .pfn            = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
+                .length         = KIRKWOOD_REGS_SIZE,
+                .type           = MT_DEVICE,
+        },
+};
+
+void __init kirkwood_map_io(void)
+{
+        iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
+}
+
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data kirkwood_ehci_data = {
+        .dram           = &kirkwood_mbus_dram_info,
+};
+
+static u64 ehci_dmamask = 0xffffffffUL;
+
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource kirkwood_ehci_resources[] = {
+        {
+                .start  = USB_PHYS_BASE,
+                .end    = USB_PHYS_BASE + 0x0fff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = IRQ_KIRKWOOD_USB,
+                .end    = IRQ_KIRKWOOD_USB,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device kirkwood_ehci = {
+        .name           = "orion-ehci",
+        .id             = 0,
+        .dev            = {
+                .dma_mask               = &ehci_dmamask,
+                .coherent_dma_mask      = 0xffffffff,
+                .platform_data          = &kirkwood_ehci_data,
+        },
+        .resource       = kirkwood_ehci_resources,
+        .num_resources  = ARRAY_SIZE(kirkwood_ehci_resources),
+};
+
+void __init kirkwood_ehci_init(void)
+{
+        platform_device_register(&kirkwood_ehci);
+}
+
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data kirkwood_ge00_shared_data = {
+        .t_clk          = KIRKWOOD_TCLK,
+        .dram           = &kirkwood_mbus_dram_info,
+};
+
+static struct resource kirkwood_ge00_shared_resources[] = {
+        {
+                .name   = "ge00 base",
+                .start  = GE00_PHYS_BASE + 0x2000,
+                .end    = GE00_PHYS_BASE + 0x3fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device kirkwood_ge00_shared = {
+        .name           = MV643XX_ETH_SHARED_NAME,
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &kirkwood_ge00_shared_data,
+        },
+        .num_resources  = 1,
+        .resource       = kirkwood_ge00_shared_resources,
+};
+
+static struct resource kirkwood_ge00_resources[] = {
+        {
+                .name   = "ge00 irq",
+                .start  = IRQ_KIRKWOOD_GE00_SUM,
+                .end    = IRQ_KIRKWOOD_GE00_SUM,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device kirkwood_ge00 = {
+        .name           = MV643XX_ETH_NAME,
+        .id             = 0,
+        .num_resources  = 1,
+        .resource       = kirkwood_ge00_resources,
+};
+
+void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+        eth_data->shared = &kirkwood_ge00_shared;
+        kirkwood_ge00.dev.platform_data = eth_data;
+
+        platform_device_register(&kirkwood_ge00_shared);
+        platform_device_register(&kirkwood_ge00);
+}
+
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static struct resource kirkwood_rtc_resource = {
+        .start  = RTC_PHYS_BASE,
+        .end    = RTC_PHYS_BASE + SZ_16 - 1,
+        .flags  = IORESOURCE_MEM,
+};
+
+void __init kirkwood_rtc_init(void)
+{
+        platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1);
+}
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource kirkwood_sata_resources[] = {
+        {
+                .name   = "sata base",
+                .start  = SATA_PHYS_BASE,
+                .end    = SATA_PHYS_BASE + 0x5000 - 1,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .name   = "sata irq",
+                .start  = IRQ_KIRKWOOD_SATA,
+                .end    = IRQ_KIRKWOOD_SATA,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device kirkwood_sata = {
+        .name           = "sata_mv",
+        .id             = 0,
+        .dev            = {
+                .coherent_dma_mask      = 0xffffffff,
+        },
+        .num_resources  = ARRAY_SIZE(kirkwood_sata_resources),
+        .resource       = kirkwood_sata_resources,
+};
+
+void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
+{
+        sata_data->dram = &kirkwood_mbus_dram_info;
+        kirkwood_sata.dev.platform_data = sata_data;
+        platform_device_register(&kirkwood_sata);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port kirkwood_uart0_data[] = {
+        {
+                .mapbase        = UART0_PHYS_BASE,
+                .membase        = (char *)UART0_VIRT_BASE,
+                .irq            = IRQ_KIRKWOOD_UART_0,
+                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = KIRKWOOD_TCLK,
+        }, {
+        },
+};
+
+static struct resource kirkwood_uart0_resources[] = {
+        {
+                .start          = UART0_PHYS_BASE,
+                .end            = UART0_PHYS_BASE + 0xff,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = IRQ_KIRKWOOD_UART_0,
+                .end            = IRQ_KIRKWOOD_UART_0,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device kirkwood_uart0 = {
+        .name                   = "serial8250",
+        .id                     = 0,
+        .dev                    = {
+                .platform_data  = kirkwood_uart0_data,
+        },
+        .resource               = kirkwood_uart0_resources,
+        .num_resources          = ARRAY_SIZE(kirkwood_uart0_resources),
+};
+
+void __init kirkwood_uart0_init(void)
+{
+        platform_device_register(&kirkwood_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port kirkwood_uart1_data[] = {
+        {
+                .mapbase        = UART1_PHYS_BASE,
+                .membase        = (char *)UART1_VIRT_BASE,
+                .irq            = IRQ_KIRKWOOD_UART_1,
+                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = KIRKWOOD_TCLK,
+        }, {
+        },
+};
+
+static struct resource kirkwood_uart1_resources[] = {
+        {
+                .start          = UART1_PHYS_BASE,
+                .end            = UART1_PHYS_BASE + 0xff,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = IRQ_KIRKWOOD_UART_1,
+                .end            = IRQ_KIRKWOOD_UART_1,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device kirkwood_uart1 = {
+        .name                   = "serial8250",
+        .id                     = 1,
+        .dev                    = {
+                .platform_data  = kirkwood_uart1_data,
+        },
+        .resource               = kirkwood_uart1_resources,
+        .num_resources          = ARRAY_SIZE(kirkwood_uart1_resources),
+};
+
+void __init kirkwood_uart1_init(void)
+{
+        platform_device_register(&kirkwood_uart1);
+}
+
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static void kirkwood_timer_init(void)
+{
+        orion_time_init(IRQ_KIRKWOOD_BRIDGE, KIRKWOOD_TCLK);
+}
+
+struct sys_timer kirkwood_timer = {
+        .init = kirkwood_timer_init,
+};
+
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+static char * __init kirkwood_id(void)
+{
+        switch (readl(DEVICE_ID) & 0x3) {
+        case 0:
+                return "88F6180";
+        case 1:
+                return "88F6192";
+        case 2:
+                return "88F6281";
+        }
+
+        return "unknown 88F6000 variant";
+}
+
+static int __init is_l2_writethrough(void)
+{
+        return !!(readl(L2_CONFIG_REG) & L2_WRITETHROUGH);
+}
+
+void __init kirkwood_init(void)
+{
+        printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
+                kirkwood_id(), KIRKWOOD_TCLK);
+
+        kirkwood_setup_cpu_mbus();
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+        feroceon_l2_init(is_l2_writethrough());
+#endif
+}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
new file mode 100644
index 000000000000..5dee2f6b40a5
--- /dev/null
+++ b/arch/arm/mach-kirkwood/common.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-kirkwood/common.h
+ *
+ * Core functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_COMMON_H
+#define __ARCH_KIRKWOOD_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+/*
+ * Basic Kirkwood init functions used early by machine-setup.
+ */
+void kirkwood_map_io(void);
+void kirkwood_init(void);
+void kirkwood_init_irq(void);
+
+extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
+void kirkwood_setup_cpu_mbus(void);
+void kirkwood_setup_pcie_io_win(int window, u32 base, u32 size,
+                                int maj, int min);
+void kirkwood_setup_pcie_mem_win(int window, u32 base, u32 size,
+                                 int maj, int min);
+
+void kirkwood_ehci_init(void);
+void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_pcie_init(void);
+void kirkwood_rtc_init(void);
+void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_uart0_init(void);
+void kirkwood_uart1_init(void);
+
+extern struct sys_timer kirkwood_timer;
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
new file mode 100644
index 000000000000..d5c482c628e3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+ *
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/kirkwood.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
+        .phy_addr       = 8,
+};
+
+static struct mv_sata_platform_data db88f6281_sata_data = {
+        .n_ports        = 2,
+};
+
+static void __init db88f6281_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_init();
+
+        kirkwood_ehci_init();
+        kirkwood_ge00_init(&db88f6281_ge00_data);
+        kirkwood_rtc_init();
+        kirkwood_sata_init(&db88f6281_sata_data);
+        kirkwood_uart0_init();
+        kirkwood_uart1_init();
+}
+
+static int __init db88f6281_pci_init(void)
+{
+        if (machine_is_db88f6281_bp())
+                kirkwood_pcie_init();
+
+        return 0;
+}
+subsys_initcall(db88f6281_pci_init);
+
+MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
+        /* Maintainer: Saeed Bishara <saeed@marvell.com> */
+        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+        .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = db88f6281_init,
+        .map_io         = kirkwood_map_io,
+        .init_irq       = kirkwood_init_irq,
+        .timer          = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
new file mode 100644
index 000000000000..302bb2cf6669
--- /dev/null
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-kirkwood/irq.c
+ *
+ * Kirkwood IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/plat-orion/irq.h>
+#include "common.h"
+
+void __init kirkwood_init_irq(void)
+{
+        orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+        orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+}
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
new file mode 100644
index 000000000000..8282d0ff84bf
--- /dev/null
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-kirkwood/pcie.c
+ *
+ * PCIe functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/plat-orion/pcie.h>
+#include "common.h"
+
+
+#define PCIE_BASE       ((void __iomem *)PCIE_VIRT_BASE)
+
+static int pcie_valid_config(int bus, int dev)
+{
+        /*
+         * Don't go out when trying to access --
+         * 1. nonexisting device on local bus
+         * 2. where there's no device connected (no link)
+         */
+        if (bus == 0 && dev == 0)
+                return 1;
+
+        if (!orion_pcie_link_up(PCIE_BASE))
+                return 0;
+
+        if (bus == 0 && dev != 1)
+                return 0;
+
+        return 1;
+}
+
+
+/*
+ * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(kirkwood_pcie_lock);
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+                        int size, u32 *val)
+{
+        unsigned long flags;
+        int ret;
+
+        if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+                *val = 0xffffffff;
+                return PCIBIOS_DEVICE_NOT_FOUND;
+        }
+
+        spin_lock_irqsave(&kirkwood_pcie_lock, flags);
+        ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
+        spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+
+        return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+                        int where, int size, u32 val)
+{
+        unsigned long flags;
+        int ret;
+
+        if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
+                return PCIBIOS_DEVICE_NOT_FOUND;
+
+        spin_lock_irqsave(&kirkwood_pcie_lock, flags);
+        ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
+        spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+
+        return ret;
+}
+
+static struct pci_ops pcie_ops = {
+        .read = pcie_rd_conf,
+        .write = pcie_wr_conf,
+};
+
+
+static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+        struct resource *res;
+
+        /*
+         * Generic PCIe unit setup.
+         */
+        orion_pcie_setup(PCIE_BASE, &kirkwood_mbus_dram_info);
+
+        /*
+         * Request resources.
+         */
+        res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+        if (!res)
+                panic("pcie_setup unable to alloc resources");
+
+        /*
+         * IORESOURCE_IO
+         */
+        res[0].name = "PCIe I/O Space";
+        res[0].flags = IORESOURCE_IO;
+        res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+        res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
+        if (request_resource(&ioport_resource, &res[0]))
+                panic("Request PCIe IO resource failed\n");
+        sys->resource[0] = &res[0];
+
+        /*
+         * IORESOURCE_MEM
+         */
+        res[1].name = "PCIe Memory Space";
+        res[1].flags = IORESOURCE_MEM;
+        res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+        res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+        if (request_resource(&iomem_resource, &res[1]))
+                panic("Request PCIe Memory resource failed\n");
+        sys->resource[1] = &res[1];
+
+        sys->resource[2] = NULL;
+        sys->io_offset = 0;
+
+        return 1;
+}
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+        /*
+         * Prevent enumeration of root complex.
+         */
+        if (dev->bus->parent == NULL && dev->devfn == 0) {
+                int i;
+
+                for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+                        dev->resource[i].start = 0;
+                        dev->resource[i].end   = 0;
+                        dev->resource[i].flags = 0;
+                }
+        }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+        struct pci_bus *bus;
+
+        if (nr == 0) {
+                bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+        } else {
+                bus = NULL;
+                BUG();
+        }
+
+        return bus;
+}
+
+static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        return IRQ_KIRKWOOD_PCIE;
+}
+
+static struct hw_pci kirkwood_pci __initdata = {
+        .nr_controllers = 1,
+        .swizzle        = pci_std_swizzle,
+        .setup          = kirkwood_pcie_setup,
+        .scan           = kirkwood_pcie_scan_bus,
+        .map_irq        = kirkwood_pcie_map_irq,
+};
+
+void __init kirkwood_pcie_init(void)
+{
+        pci_common_init(&kirkwood_pci);
+}
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
new file mode 100644
index 000000000000..6cf642c504d3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+ *
+ * Marvell RD-88F6192-NAS Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/kirkwood.h>
+#include "common.h"
+
+#define RD88F6192_GPIO_USB_VBUS         10
+
+static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
+        .phy_addr       = 8,
+};
+
+static struct mv_sata_platform_data rd88f6192_sata_data = {
+        .n_ports        = 2,
+};
+
+static void __init rd88f6192_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_init();
+
+        kirkwood_ehci_init();
+        kirkwood_ge00_init(&rd88f6192_ge00_data);
+        kirkwood_rtc_init();
+        kirkwood_sata_init(&rd88f6192_sata_data);
+        kirkwood_uart0_init();
+}
+
+static int __init rd88f6192_pci_init(void)
+{
+        if (machine_is_rd88f6192_nas())
+                kirkwood_pcie_init();
+
+        return 0;
+}
+subsys_initcall(rd88f6192_pci_init);
+
+MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
+        /* Maintainer: Saeed Bishara <saeed@marvell.com> */
+        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+        .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = rd88f6192_init,
+        .map_io         = kirkwood_map_io,
+        .init_irq       = kirkwood_init_irq,
+        .timer          = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
new file mode 100644
index 000000000000..e1f8de2c74a2
--- /dev/null
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -0,0 +1,113 @@
+/*
+ * arch/arm/mach-kirkwood/rd88f6281-setup.c
+ *
+ * Marvell RD-88F6281 Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/plat-orion/orion_nand.h>
+#include "common.h"
+
+static struct mtd_partition rd88f6281_nand_parts[] = {
+        {
+                .name = "u-boot",
+                .offset = 0,
+                .size = SZ_1M
+        }, {
+                .name = "uImage",
+                .offset = MTDPART_OFS_NXTBLK,
+                .size = SZ_2M
+        }, {
+                .name = "root",
+                .offset = MTDPART_OFS_NXTBLK,
+                .size = MTDPART_SIZ_FULL
+        },
+};
+
+static struct resource rd88f6281_nand_resource = {
+        .flags          = IORESOURCE_MEM,
+        .start          = KIRKWOOD_NAND_MEM_PHYS_BASE,
+        .end            = KIRKWOOD_NAND_MEM_PHYS_BASE +
+                          KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data rd88f6281_nand_data = {
+        .parts          = rd88f6281_nand_parts,
+        .nr_parts       = ARRAY_SIZE(rd88f6281_nand_parts),
+        .cle            = 0,
+        .ale            = 1,
+        .width          = 8,
+        .chip_delay     = 25,
+};
+
+static struct platform_device rd88f6281_nand_flash = {
+        .name           = "orion_nand",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &rd88f6281_nand_data,
+        },
+        .resource       = &rd88f6281_nand_resource,
+        .num_resources  = 1,
+};
+
+static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
+        .phy_addr       = -1,
+};
+
+static struct mv_sata_platform_data rd88f6281_sata_data = {
+        .n_ports        = 2,
+};
+
+static void __init rd88f6281_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_init();
+
+        kirkwood_ehci_init();
+        kirkwood_ge00_init(&rd88f6281_ge00_data);
+        kirkwood_rtc_init();
+        kirkwood_sata_init(&rd88f6281_sata_data);
+        kirkwood_uart0_init();
+        kirkwood_uart1_init();
+
+        platform_device_register(&rd88f6281_nand_flash);
+}
+
+static int __init rd88f6281_pci_init(void)
+{
+        if (machine_is_rd88f6281())
+                kirkwood_pcie_init();
+
+        return 0;
+}
+subsys_initcall(rd88f6281_pci_init);
+
+MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
+        /* Maintainer: Saeed Bishara <saeed@marvell.com> */
+        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+        .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = rd88f6281_init,
+        .map_io         = kirkwood_map_io,
+        .init_irq       = kirkwood_init_irq,
+        .timer          = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-loki/Kconfig b/arch/arm/mach-loki/Kconfig
new file mode 100644
index 000000000000..0045bdd761ca
--- /dev/null
+++ b/arch/arm/mach-loki/Kconfig
@@ -0,0 +1,13 @@
+if ARCH_LOKI
+
+menu "Marvell Loki (88RC8480) Implementations"
+
+config MACH_LB88RC8480
+        bool "Marvell LB88RC8480 Development Board"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell LB88RC8480 Development Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-loki/Makefile b/arch/arm/mach-loki/Makefile
new file mode 100644
index 000000000000..d43233ee590f
--- /dev/null
+++ b/arch/arm/mach-loki/Makefile
@@ -0,0 +1,3 @@
+obj-y                           += common.o addr-map.o irq.o
+
+obj-$(CONFIG_MACH_LB88RC8480)   += lb88rc8480-setup.o
diff --git a/arch/arm/mach-loki/Makefile.boot b/arch/arm/mach-loki/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-loki/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y   := 0x00008000
+params_phys-y   := 0x00000100
+initrd_phys-y   := 0x00800000
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
new file mode 100644
index 000000000000..ba25e56ade58
--- /dev/null
+++ b/arch/arm/mach-loki/addr-map.c
@@ -0,0 +1,121 @@
+/*
+ * arch/arm/mach-loki/addr-map.c
+ *
+ * Address map functions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR              0
+#define TARGET_DEV_BUS          1
+#define TARGET_PCIE0            3
+#define TARGET_PCIE1            4
+#define ATTR_DEV_BOOT           0x0f
+#define ATTR_DEV_CS2            0x1b
+#define ATTR_DEV_CS1            0x1d
+#define ATTR_DEV_CS0            0x1e
+#define ATTR_PCIE_IO            0x51
+#define ATTR_PCIE_MEM           0x59
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_SIZE_CS(n)          DDR_REG(0x1500 + ((n) << 3))
+#define DDR_BASE_CS(n)          DDR_REG(0x1504 + ((n) << 3))
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define CPU_WIN_CTRL(n)         BRIDGE_REG(0x000 | ((n) << 4))
+#define CPU_WIN_BASE(n)         BRIDGE_REG(0x004 | ((n) << 4))
+#define CPU_WIN_REMAP_LO(n)     BRIDGE_REG(0x008 | ((n) << 4))
+#define CPU_WIN_REMAP_HI(n)     BRIDGE_REG(0x00c | ((n) << 4))
+
+
+struct mbus_dram_target_info loki_mbus_dram_info;
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+                                 u8 target, u8 attr, int remap)
+{
+        u32 ctrl;
+
+        base &= 0xffff0000;
+        ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (1 << 5) | target;
+
+        writel(base, CPU_WIN_BASE(win));
+        writel(ctrl, CPU_WIN_CTRL(win));
+        if (win < 2) {
+                if (remap < 0)
+                        remap = base;
+
+                writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
+                writel(0, CPU_WIN_REMAP_HI(win));
+        }
+}
+
+void __init loki_setup_cpu_mbus(void)
+{
+        int i;
+        int cs;
+
+        /*
+         * First, disable and clear windows.
+         */
+        for (i = 0; i < 8; i++) {
+                writel(0, CPU_WIN_BASE(i));
+                writel(0, CPU_WIN_CTRL(i));
+                if (i < 2) {
+                        writel(0, CPU_WIN_REMAP_LO(i));
+                        writel(0, CPU_WIN_REMAP_HI(i));
+                }
+        }
+
+        /*
+         * Setup windows for PCIe IO+MEM space.
+         */
+        setup_cpu_win(2, LOKI_PCIE0_MEM_PHYS_BASE, LOKI_PCIE0_MEM_SIZE,
+                      TARGET_PCIE0, ATTR_PCIE_MEM, -1);
+        setup_cpu_win(3, LOKI_PCIE1_MEM_PHYS_BASE, LOKI_PCIE1_MEM_SIZE,
+                      TARGET_PCIE1, ATTR_PCIE_MEM, -1);
+
+        /*
+         * Setup MBUS dram target info.
+         */
+        loki_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+        for (i = 0, cs = 0; i < 4; i++) {
+                u32 base = readl(DDR_BASE_CS(i));
+                u32 size = readl(DDR_SIZE_CS(i));
+
+                /*
+                 * Chip select enabled?
+                 */
+                if (size & 1) {
+                        struct mbus_dram_window *w;
+
+                        w = &loki_mbus_dram_info.cs[cs++];
+                        w->cs_index = i;
+                        w->mbus_attr = 0xf & ~(1 << i);
+                        w->base = base & 0xffff0000;
+                        w->size = (size | 0x0000ffff) + 1;
+                }
+        }
+        loki_mbus_dram_info.num_cs = cs;
+}
+
+void __init loki_setup_dev_boot_win(u32 base, u32 size)
+{
+        setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
+}
diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c
new file mode 100644
index 000000000000..410f50399dd3
--- /dev/null
+++ b/arch/arm/mach-loki/common.c
@@ -0,0 +1,305 @@
+/*
+ * arch/arm/mach-loki/common.c
+ *
+ * Core functions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/page.h>
+#include <asm/timex.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/arch/loki.h>
+#include <asm/plat-orion/orion_nand.h>
+#include <asm/plat-orion/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc loki_io_desc[] __initdata = {
+        {
+                .virtual        = LOKI_REGS_VIRT_BASE,
+                .pfn            = __phys_to_pfn(LOKI_REGS_PHYS_BASE),
+                .length         = LOKI_REGS_SIZE,
+                .type           = MT_DEVICE,
+        },
+};
+
+void __init loki_map_io(void)
+{
+        iotable_init(loki_io_desc, ARRAY_SIZE(loki_io_desc));
+}
+
+
+/*****************************************************************************
+ * GE0
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data loki_ge0_shared_data = {
+        .t_clk          = LOKI_TCLK,
+        .dram           = &loki_mbus_dram_info,
+};
+
+static struct resource loki_ge0_shared_resources[] = {
+        {
+                .name   = "ge0 base",
+                .start  = GE0_PHYS_BASE + 0x2000,
+                .end    = GE0_PHYS_BASE + 0x3fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device loki_ge0_shared = {
+        .name           = MV643XX_ETH_SHARED_NAME,
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &loki_ge0_shared_data,
+        },
+        .num_resources  = 1,
+        .resource       = loki_ge0_shared_resources,
+};
+
+static struct resource loki_ge0_resources[] = {
+        {
+                .name   = "ge0 irq",
+                .start  = IRQ_LOKI_GBE_A_INT,
+                .end    = IRQ_LOKI_GBE_A_INT,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device loki_ge0 = {
+        .name           = MV643XX_ETH_NAME,
+        .id             = 0,
+        .num_resources  = 1,
+        .resource       = loki_ge0_resources,
+};
+
+void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
+{
+        eth_data->shared = &loki_ge0_shared;
+        loki_ge0.dev.platform_data = eth_data;
+
+        writel(0x00079220, GE0_VIRT_BASE + 0x20b0);
+        platform_device_register(&loki_ge0_shared);
+        platform_device_register(&loki_ge0);
+}
+
+
+/*****************************************************************************
+ * GE1
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data loki_ge1_shared_data = {
+        .t_clk          = LOKI_TCLK,
+        .dram           = &loki_mbus_dram_info,
+};
+
+static struct resource loki_ge1_shared_resources[] = {
+        {
+                .name   = "ge1 base",
+                .start  = GE1_PHYS_BASE + 0x2000,
+                .end    = GE1_PHYS_BASE + 0x3fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device loki_ge1_shared = {
+        .name           = MV643XX_ETH_SHARED_NAME,
+        .id             = 1,
+        .dev            = {
+                .platform_data  = &loki_ge1_shared_data,
+        },
+        .num_resources  = 1,
+        .resource       = loki_ge1_shared_resources,
+};
+
+static struct resource loki_ge1_resources[] = {
+        {
+                .name   = "ge1 irq",
+                .start  = IRQ_LOKI_GBE_B_INT,
+                .end    = IRQ_LOKI_GBE_B_INT,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device loki_ge1 = {
+        .name           = MV643XX_ETH_NAME,
+        .id             = 1,
+        .num_resources  = 1,
+        .resource       = loki_ge1_resources,
+};
+
+void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
+{
+        eth_data->shared = &loki_ge1_shared;
+        loki_ge1.dev.platform_data = eth_data;
+
+        writel(0x00079220, GE1_VIRT_BASE + 0x20b0);
+        platform_device_register(&loki_ge1_shared);
+        platform_device_register(&loki_ge1);
+}
+
+
+/*****************************************************************************
+ * SAS/SATA
+ ****************************************************************************/
+static struct resource loki_sas_resources[] = {
+        {
+                .name   = "mvsas0 mem",
+                .start  = SAS0_PHYS_BASE,
+                .end    = SAS0_PHYS_BASE + 0x01ff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .name   = "mvsas0 irq",
+                .start  = IRQ_LOKI_SAS_A,
+                .end    = IRQ_LOKI_SAS_A,
+                .flags  = IORESOURCE_IRQ,
+        }, {
+                .name   = "mvsas1 mem",
+                .start  = SAS1_PHYS_BASE,
+                .end    = SAS1_PHYS_BASE + 0x01ff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .name   = "mvsas1 irq",
+                .start  = IRQ_LOKI_SAS_B,
+                .end    = IRQ_LOKI_SAS_B,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device loki_sas = {
+        .name           = "mvsas",
+        .id             = 0,
+        .dev            = {
+                .coherent_dma_mask      = 0xffffffff,
+        },
+        .num_resources  = ARRAY_SIZE(loki_sas_resources),
+        .resource       = loki_sas_resources,
+};
+
+void __init loki_sas_init(void)
+{
+        writel(0x8300f707, DDR_REG(0x1424));
+        platform_device_register(&loki_sas);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port loki_uart0_data[] = {
+        {
+                .mapbase        = UART0_PHYS_BASE,
+                .membase        = (char *)UART0_VIRT_BASE,
+                .irq            = IRQ_LOKI_UART0,
+                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = LOKI_TCLK,
+        }, {
+        },
+};
+
+static struct resource loki_uart0_resources[] = {
+        {
+                .start          = UART0_PHYS_BASE,
+                .end            = UART0_PHYS_BASE + 0xff,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = IRQ_LOKI_UART0,
+                .end            = IRQ_LOKI_UART0,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device loki_uart0 = {
+        .name                   = "serial8250",
+        .id                     = 0,
+        .dev                    = {
+                .platform_data  = loki_uart0_data,
+        },
+        .resource               = loki_uart0_resources,
+        .num_resources          = ARRAY_SIZE(loki_uart0_resources),
+};
+
+void __init loki_uart0_init(void)
+{
+        platform_device_register(&loki_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port loki_uart1_data[] = {
+        {
+                .mapbase        = UART1_PHYS_BASE,
+                .membase        = (char *)UART1_VIRT_BASE,
+                .irq            = IRQ_LOKI_UART1,
+                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = LOKI_TCLK,
+        }, {
+        },
+};
+
+static struct resource loki_uart1_resources[] = {
+        {
+                .start          = UART1_PHYS_BASE,
+                .end            = UART1_PHYS_BASE + 0xff,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = IRQ_LOKI_UART1,
+                .end            = IRQ_LOKI_UART1,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device loki_uart1 = {
+        .name                   = "serial8250",
+        .id                     = 1,
+        .dev                    = {
+                .platform_data  = loki_uart1_data,
+        },
+        .resource               = loki_uart1_resources,
+        .num_resources          = ARRAY_SIZE(loki_uart1_resources),
+};
+
+void __init loki_uart1_init(void)
+{
+        platform_device_register(&loki_uart1);
+}
+
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static void loki_timer_init(void)
+{
+        orion_time_init(IRQ_LOKI_BRIDGE, LOKI_TCLK);
+}
+
+struct sys_timer loki_timer = {
+        .init = loki_timer_init,
+};
+
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+void __init loki_init(void)
+{
+        printk(KERN_INFO "Loki ID: 88RC8480. TCLK=%d.\n", LOKI_TCLK);
+
+        loki_setup_cpu_mbus();
+}
diff --git a/arch/arm/mach-loki/common.h b/arch/arm/mach-loki/common.h
new file mode 100644
index 000000000000..26054fd0f05e
--- /dev/null
+++ b/arch/arm/mach-loki/common.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-loki/common.h
+ *
+ * Core functions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_LOKI_COMMON_H
+#define __ARCH_LOKI_COMMON_H
+
+struct mv643xx_eth_platform_data;
+
+/*
+ * Basic Loki init functions used early by machine-setup.
+ */
+void loki_map_io(void);
+void loki_init(void);
+void loki_init_irq(void);
+
+extern struct mbus_dram_target_info loki_mbus_dram_info;
+void loki_setup_cpu_mbus(void);
+void loki_setup_dev_boot_win(u32 base, u32 size);
+
+void loki_ge0_init(struct mv643xx_eth_platform_data *eth_data);
+void loki_ge1_init(struct mv643xx_eth_platform_data *eth_data);
+void loki_sas_init(void);
+void loki_uart0_init(void);
+void loki_uart1_init(void);
+
+extern struct sys_timer loki_timer;
+
+
+#endif
diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c
new file mode 100644
index 000000000000..d839af91fe03
--- /dev/null
+++ b/arch/arm/mach-loki/irq.c
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-loki/irq.c
+ *
+ * Marvell Loki (88RC8480) IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/plat-orion/irq.h>
+#include "common.h"
+
+void __init loki_init_irq(void)
+{
+        orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_OFF));
+}
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
new file mode 100644
index 000000000000..d1b9e6e6253a
--- /dev/null
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-loki/lb88rc8480-setup.c
+ *
+ * Marvell LB88RC8480 Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/loki.h>
+#include "common.h"
+
+#define LB88RC8480_FLASH_BOOT_CS_BASE   0xf8000000
+#define LB88RC8480_FLASH_BOOT_CS_SIZE   SZ_128M
+
+#define LB88RC8480_NOR_BOOT_BASE        0xff000000
+#define LB88RC8480_NOR_BOOT_SIZE        SZ_16M
+
+static struct mtd_partition lb88rc8480_boot_flash_parts[] = {
+        {
+                .name   = "kernel",
+                .offset = 0,
+                .size   = SZ_2M,
+        }, {
+                .name   = "root-fs",
+                .offset = SZ_2M,
+                .size   = (SZ_8M + SZ_4M + SZ_1M),
+        }, {
+                .name   = "u-boot",
+                .offset = (SZ_8M + SZ_4M + SZ_2M + SZ_1M),
+                .size   = SZ_1M,
+        },
+};
+
+static struct physmap_flash_data lb88rc8480_boot_flash_data = {
+        .parts          = lb88rc8480_boot_flash_parts,
+        .nr_parts       = ARRAY_SIZE(lb88rc8480_boot_flash_parts),
+        .width          = 1,    /* 8 bit bus width */
+};
+
+static struct resource lb88rc8480_boot_flash_resource = {
+        .flags  = IORESOURCE_MEM,
+        .start  = LB88RC8480_NOR_BOOT_BASE,
+        .end    = LB88RC8480_NOR_BOOT_BASE + LB88RC8480_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device lb88rc8480_boot_flash = {
+        .name   = "physmap-flash",
+        .id     = 0,
+        .dev    = {
+                .platform_data  = &lb88rc8480_boot_flash_data,
+        },
+        .num_resources  = 1,
+        .resource       = &lb88rc8480_boot_flash_resource,
+};
+
+static struct mv643xx_eth_platform_data lb88rc8480_ge0_data = {
+        .phy_addr       = 1,
+        .mac_addr       = { 0x00, 0x50, 0x43, 0x11, 0x22, 0x33 },
+};
+
+static void __init lb88rc8480_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        loki_init();
+
+        loki_ge0_init(&lb88rc8480_ge0_data);
+        loki_sas_init();
+        loki_uart0_init();
+        loki_uart1_init();
+
+        loki_setup_dev_boot_win(LB88RC8480_FLASH_BOOT_CS_BASE,
+                                LB88RC8480_FLASH_BOOT_CS_SIZE);
+        platform_device_register(&lb88rc8480_boot_flash);
+}
+
+MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board")
+        /* Maintainer: Ke Wei <kewei@marvell.com> */
+        .phys_io        = LOKI_REGS_PHYS_BASE,
+        .io_pg_offst    = ((LOKI_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = lb88rc8480_init,
+        .map_io         = loki_map_io,
+        .init_irq       = loki_init_irq,
+        .timer          = &loki_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
new file mode 100644
index 000000000000..d83cb86837db
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -0,0 +1,13 @@
+if ARCH_MV78XX0
+
+menu "Marvell MV78xx0 Implementations"
+
+config MACH_DB78X00_BP
+        bool "Marvell DB-78x00-BP Development Board"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell DB-78x00-BP Development Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
new file mode 100644
index 000000000000..ec16c05c3b1b
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -0,0 +1,2 @@
+obj-y                           += common.o addr-map.o irq.o pcie.o
+obj-$(CONFIG_MACH_DB78X00_BP)   += db78x00-bp-setup.o
diff --git a/arch/arm/mach-mv78xx0/Makefile.boot b/arch/arm/mach-mv78xx0/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y   := 0x00008000
+params_phys-y   := 0x00000100
+initrd_phys-y   := 0x00800000
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
new file mode 100644
index 000000000000..4004b672a2eb
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -0,0 +1,156 @@
+/*
+ * arch/arm/mach-mv78xx0/addr-map.c
+ *
+ * Address map functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <asm/io.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR              0
+#define TARGET_DEV_BUS          1
+#define TARGET_PCIE0            4
+#define TARGET_PCIE1            8
+#define TARGET_PCIE(i)          ((i) ? TARGET_PCIE1 : TARGET_PCIE0)
+#define ATTR_DEV_SPI_ROM        0x1f
+#define ATTR_DEV_BOOT           0x2f
+#define ATTR_DEV_CS3            0x37
+#define ATTR_DEV_CS2            0x3b
+#define ATTR_DEV_CS1            0x3d
+#define ATTR_DEV_CS0            0x3e
+#define ATTR_PCIE_IO(l)         (0xf0 & ~(0x10 << (l)))
+#define ATTR_PCIE_MEM(l)        (0xf8 & ~(0x10 << (l)))
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_BASE_CS_OFF(n)      (0x0000 + ((n) << 3))
+#define DDR_SIZE_CS_OFF(n)      (0x0004 + ((n) << 3))
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN0_OFF(n)             (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
+#define WIN8_OFF(n)             (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
+#define WIN_CTRL_OFF            0x0000
+#define WIN_BASE_OFF            0x0004
+#define WIN_REMAP_LO_OFF        0x0008
+#define WIN_REMAP_HI_OFF        0x000c
+
+
+struct mbus_dram_target_info mv78xx0_mbus_dram_info;
+
+static void __init __iomem *win_cfg_base(int win)
+{
+        /*
+         * Find the control register base address for this window.
+         *
+         * BRIDGE_VIRT_BASE points to the right (CPU0's or CPU1's)
+         * MBUS bridge depending on which CPU core we're running on,
+         * so we don't need to take that into account here.
+         */
+
+        return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
+}
+
+static int __init cpu_win_can_remap(int win)
+{
+        if (win < 8)
+                return 1;
+
+        return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+                                 u8 target, u8 attr, int remap)
+{
+        void __iomem *addr = win_cfg_base(win);
+        u32 ctrl;
+
+        base &= 0xffff0000;
+        ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+        writel(base, addr + WIN_BASE_OFF);
+        writel(ctrl, addr + WIN_CTRL_OFF);
+        if (cpu_win_can_remap(win)) {
+                if (remap < 0)
+                        remap = base;
+
+                writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
+                writel(0, addr + WIN_REMAP_HI_OFF);
+        }
+}
+
+void __init mv78xx0_setup_cpu_mbus(void)
+{
+        void __iomem *addr;
+        int i;
+        int cs;
+
+        /*
+         * First, disable and clear windows.
+         */
+        for (i = 0; i < 14; i++) {
+                addr = win_cfg_base(i);
+
+                writel(0, addr + WIN_BASE_OFF);
+                writel(0, addr + WIN_CTRL_OFF);
+                if (cpu_win_can_remap(i)) {
+                        writel(0, addr + WIN_REMAP_LO_OFF);
+                        writel(0, addr + WIN_REMAP_HI_OFF);
+                }
+        }
+
+        /*
+         * Setup MBUS dram target info.
+         */
+        mv78xx0_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+        if (mv78xx0_core_index() == 0)
+                addr = (void __iomem *)DDR_WINDOW_CPU0_BASE;
+        else
+                addr = (void __iomem *)DDR_WINDOW_CPU1_BASE;
+
+        for (i = 0, cs = 0; i < 4; i++) {
+                u32 base = readl(addr + DDR_BASE_CS_OFF(i));
+                u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+
+                /*
+                 * Chip select enabled?
+                 */
+                if (size & 1) {
+                        struct mbus_dram_window *w;
+
+                        w = &mv78xx0_mbus_dram_info.cs[cs++];
+                        w->cs_index = i;
+                        w->mbus_attr = 0xf & ~(1 << i);
+                        w->base = base & 0xffff0000;
+                        w->size = (size | 0x0000ffff) + 1;
+                }
+        }
+        mv78xx0_mbus_dram_info.num_cs = cs;
+}
+
+void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
+                                      int maj, int min)
+{
+        setup_cpu_win(window, base, size, TARGET_PCIE(maj),
+                      ATTR_PCIE_IO(min), -1);
+}
+
+void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
+                                       int maj, int min)
+{
+        setup_cpu_win(window, base, size, TARGET_PCIE(maj),
+                      ATTR_PCIE_MEM(min), -1);
+}
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
new file mode 100644
index 000000000000..d27b83b7bf62
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -0,0 +1,754 @@
+/*
+ * arch/arm/mach-mv78xx0/common.c
+ *
+ * Core functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/arch/mv78xx0.h>
+#include <asm/plat-orion/cache-feroceon-l2.h>
+#include <asm/plat-orion/ehci-orion.h>
+#include <asm/plat-orion/orion_nand.h>
+#include <asm/plat-orion/time.h>
+#include "common.h"
+
+
+/*****************************************************************************
+ * Common bits
+ ****************************************************************************/
+int mv78xx0_core_index(void)
+{
+        u32 extra;
+
+        /*
+         * Read Extra Features register.
+         */
+        __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (extra));
+
+        return !!(extra & 0x00004000);
+}
+
+static int get_hclk(void)
+{
+        int hclk;
+
+        /*
+         * HCLK tick rate is configured by DEV_D[7:5] pins.
+         */
+        switch ((readl(SAMPLE_AT_RESET_LOW) >> 5) & 7) {
+        case 0:
+                hclk = 166666667;
+                break;
+        case 1:
+                hclk = 200000000;
+                break;
+        case 2:
+                hclk = 266666667;
+                break;
+        case 3:
+                hclk = 333333333;
+                break;
+        case 4:
+                hclk = 400000000;
+                break;
+        default:
+                panic("unknown HCLK PLL setting: %.8x\n",
+                        readl(SAMPLE_AT_RESET_LOW));
+        }
+
+        return hclk;
+}
+
+static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk)
+{
+        u32 cfg;
+
+        /*
+         * Core #0 PCLK/L2CLK is configured by bits [13:8], core #1
+         * PCLK/L2CLK by bits [19:14].
+         */
+        if (core_index == 0) {
+                cfg = (readl(SAMPLE_AT_RESET_LOW) >> 8) & 0x3f;
+        } else {
+                cfg = (readl(SAMPLE_AT_RESET_LOW) >> 14) & 0x3f;
+        }
+
+        /*
+         * Bits [11:8] ([17:14] for core #1) configure the PCLK:HCLK
+         * ratio (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6).
+         */
+        *pclk = ((u64)hclk * (2 + (cfg & 0xf))) >> 1;
+
+        /*
+         * Bits [13:12] ([19:18] for core #1) configure the PCLK:L2CLK
+         * ratio (1, 2, 3).
+         */
+        *l2clk = *pclk / (((cfg >> 4) & 3) + 1);
+}
+
+static int get_tclk(void)
+{
+        int tclk;
+
+        /*
+         * TCLK tick rate is configured by DEV_A[2:0] strap pins.
+         */
+        switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) {
+        case 1:
+                tclk = 166666667;
+                break;
+        case 3:
+                tclk = 200000000;
+                break;
+        default:
+                panic("unknown TCLK PLL setting: %.8x\n",
+                        readl(SAMPLE_AT_RESET_HIGH));
+        }
+
+        return tclk;
+}
+
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc mv78xx0_io_desc[] __initdata = {
+        {
+                .virtual        = MV78XX0_CORE_REGS_VIRT_BASE,
+                .pfn            = 0,
+                .length         = MV78XX0_CORE_REGS_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = MV78XX0_PCIE_IO_VIRT_BASE(0),
+                .pfn            = __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)),
+                .length         = MV78XX0_PCIE_IO_SIZE * 8,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = MV78XX0_REGS_VIRT_BASE,
+                .pfn            = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
+                .length         = MV78XX0_REGS_SIZE,
+                .type           = MT_DEVICE,
+        },
+};
+
+void __init mv78xx0_map_io(void)
+{
+        unsigned long phys;
+
+        /*
+         * Map the right set of per-core registers depending on
+         * which core we are running on.
+         */
+        if (mv78xx0_core_index() == 0) {
+                phys = MV78XX0_CORE0_REGS_PHYS_BASE;
+        } else {
+                phys = MV78XX0_CORE1_REGS_PHYS_BASE;
+        }
+        mv78xx0_io_desc[0].pfn = __phys_to_pfn(phys);
+
+        iotable_init(mv78xx0_io_desc, ARRAY_SIZE(mv78xx0_io_desc));
+}
+
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data mv78xx0_ehci_data = {
+        .dram           = &mv78xx0_mbus_dram_info,
+};
+
+static u64 ehci_dmamask = 0xffffffffUL;
+
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource mv78xx0_ehci0_resources[] = {
+        {
+                .start  = USB0_PHYS_BASE,
+                .end    = USB0_PHYS_BASE + 0x0fff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = IRQ_MV78XX0_USB_0,
+                .end    = IRQ_MV78XX0_USB_0,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mv78xx0_ehci0 = {
+        .name           = "orion-ehci",
+        .id             = 0,
+        .dev            = {
+                .dma_mask               = &ehci_dmamask,
+                .coherent_dma_mask      = 0xffffffff,
+                .platform_data          = &mv78xx0_ehci_data,
+        },
+        .resource       = mv78xx0_ehci0_resources,
+        .num_resources  = ARRAY_SIZE(mv78xx0_ehci0_resources),
+};
+
+void __init mv78xx0_ehci0_init(void)
+{
+        platform_device_register(&mv78xx0_ehci0);
+}
+
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource mv78xx0_ehci1_resources[] = {
+        {
+                .start  = USB1_PHYS_BASE,
+                .end    = USB1_PHYS_BASE + 0x0fff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = IRQ_MV78XX0_USB_1,
+                .end    = IRQ_MV78XX0_USB_1,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mv78xx0_ehci1 = {
+        .name           = "orion-ehci",
+        .id             = 1,
+        .dev            = {
+                .dma_mask               = &ehci_dmamask,
+                .coherent_dma_mask      = 0xffffffff,
+                .platform_data          = &mv78xx0_ehci_data,
+        },
+        .resource       = mv78xx0_ehci1_resources,
+        .num_resources  = ARRAY_SIZE(mv78xx0_ehci1_resources),
+};
+
+void __init mv78xx0_ehci1_init(void)
+{
+        platform_device_register(&mv78xx0_ehci1);
+}
+
+
+/*****************************************************************************
+ * EHCI2
+ ****************************************************************************/
+static struct resource mv78xx0_ehci2_resources[] = {
+        {
+                .start  = USB2_PHYS_BASE,
+                .end    = USB2_PHYS_BASE + 0x0fff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = IRQ_MV78XX0_USB_2,
+                .end    = IRQ_MV78XX0_USB_2,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mv78xx0_ehci2 = {
+        .name           = "orion-ehci",
+        .id             = 2,
+        .dev            = {
+                .dma_mask               = &ehci_dmamask,
+                .coherent_dma_mask      = 0xffffffff,
+                .platform_data          = &mv78xx0_ehci_data,
+        },
+        .resource       = mv78xx0_ehci2_resources,
+        .num_resources  = ARRAY_SIZE(mv78xx0_ehci2_resources),
+};
+
+void __init mv78xx0_ehci2_init(void)
+{
+        platform_device_register(&mv78xx0_ehci2);
+}
+
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data mv78xx0_ge00_shared_data = {
+        .t_clk          = 0,
+        .dram           = &mv78xx0_mbus_dram_info,
+};
+
+static struct resource mv78xx0_ge00_shared_resources[] = {
+        {
+                .name   = "ge00 base",
+                .start  = GE00_PHYS_BASE + 0x2000,
+                .end    = GE00_PHYS_BASE + 0x3fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device mv78xx0_ge00_shared = {
+        .name           = MV643XX_ETH_SHARED_NAME,
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &mv78xx0_ge00_shared_data,
+        },
+        .num_resources  = 1,
+        .resource       = mv78xx0_ge00_shared_resources,
+};
+
+static struct resource mv78xx0_ge00_resources[] = {
+        {
+                .name   = "ge00 irq",
+                .start  = IRQ_MV78XX0_GE00_SUM,
+                .end    = IRQ_MV78XX0_GE00_SUM,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mv78xx0_ge00 = {
+        .name           = MV643XX_ETH_NAME,
+        .id             = 0,
+        .num_resources  = 1,
+        .resource       = mv78xx0_ge00_resources,
+};
+
+void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+        eth_data->shared = &mv78xx0_ge00_shared;
+        mv78xx0_ge00.dev.platform_data = eth_data;
+
+        platform_device_register(&mv78xx0_ge00_shared);
+        platform_device_register(&mv78xx0_ge00);
+}
+
+
+/*****************************************************************************
+ * GE01
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data mv78xx0_ge01_shared_data = {
+        .t_clk          = 0,
+        .dram           = &mv78xx0_mbus_dram_info,
+};
+
+static struct resource mv78xx0_ge01_shared_resources[] = {
+        {
+                .name   = "ge01 base",
+                .start  = GE01_PHYS_BASE + 0x2000,
+                .end    = GE01_PHYS_BASE + 0x3fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device mv78xx0_ge01_shared = {
+        .name           = MV643XX_ETH_SHARED_NAME,
+        .id             = 1,
+        .dev            = {
+                .platform_data  = &mv78xx0_ge01_shared_data,
+        },
+        .num_resources  = 1,
+        .resource       = mv78xx0_ge01_shared_resources,
+};
+
+static struct resource mv78xx0_ge01_resources[] = {
+        {
+                .name   = "ge01 irq",
+                .start  = IRQ_MV78XX0_GE01_SUM,
+                .end    = IRQ_MV78XX0_GE01_SUM,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mv78xx0_ge01 = {
+        .name           = MV643XX_ETH_NAME,
+        .id             = 1,
+        .num_resources  = 1,
+        .resource       = mv78xx0_ge01_resources,
+};
+
+void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
+{
+        eth_data->shared = &mv78xx0_ge01_shared;
+        eth_data->shared_smi = &mv78xx0_ge00_shared;
+        mv78xx0_ge01.dev.platform_data = eth_data;
+
+        platform_device_register(&mv78xx0_ge01_shared);
+        platform_device_register(&mv78xx0_ge01);
+}
+
+
+/*****************************************************************************
+ * GE10
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data mv78xx0_ge10_shared_data = {
+        .t_clk          = 0,
+        .dram           = &mv78xx0_mbus_dram_info,
+};
+
+static struct resource mv78xx0_ge10_shared_resources[] = {
+        {
+                .name   = "ge10 base",
+                .start  = GE10_PHYS_BASE + 0x2000,
+                .end    = GE10_PHYS_BASE + 0x3fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device mv78xx0_ge10_shared = {
+        .name           = MV643XX_ETH_SHARED_NAME,
+        .id             = 2,
+        .dev            = {
+                .platform_data  = &mv78xx0_ge10_shared_data,
+        },
+        .num_resources  = 1,
+        .resource       = mv78xx0_ge10_shared_resources,
+};
+
+static struct resource mv78xx0_ge10_resources[] = {
+        {
+                .name   = "ge10 irq",
+                .start  = IRQ_MV78XX0_GE10_SUM,
+                .end    = IRQ_MV78XX0_GE10_SUM,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mv78xx0_ge10 = {
+        .name           = MV643XX_ETH_NAME,
+        .id             = 2,
+        .num_resources  = 1,
+        .resource       = mv78xx0_ge10_resources,
+};
+
+void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
+{
+        eth_data->shared = &mv78xx0_ge10_shared;
+        eth_data->shared_smi = &mv78xx0_ge00_shared;
+        mv78xx0_ge10.dev.platform_data = eth_data;
+
+        platform_device_register(&mv78xx0_ge10_shared);
+        platform_device_register(&mv78xx0_ge10);
+}
+
+
+/*****************************************************************************
+ * GE11
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data mv78xx0_ge11_shared_data = {
+        .t_clk          = 0,
+        .dram           = &mv78xx0_mbus_dram_info,
+};
+
+static struct resource mv78xx0_ge11_shared_resources[] = {
+        {
+                .name   = "ge11 base",
+                .start  = GE11_PHYS_BASE + 0x2000,
+                .end    = GE11_PHYS_BASE + 0x3fff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device mv78xx0_ge11_shared = {
+        .name           = MV643XX_ETH_SHARED_NAME,
+        .id             = 3,
+        .dev            = {
+                .platform_data  = &mv78xx0_ge11_shared_data,
+        },
+        .num_resources  = 1,
+        .resource       = mv78xx0_ge11_shared_resources,
+};
+
+static struct resource mv78xx0_ge11_resources[] = {
+        {
+                .name   = "ge11 irq",
+                .start  = IRQ_MV78XX0_GE11_SUM,
+                .end    = IRQ_MV78XX0_GE11_SUM,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mv78xx0_ge11 = {
+        .name           = MV643XX_ETH_NAME,
+        .id             = 3,
+        .num_resources  = 1,
+        .resource       = mv78xx0_ge11_resources,
+};
+
+void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
+{
+        eth_data->shared = &mv78xx0_ge11_shared;
+        eth_data->shared_smi = &mv78xx0_ge00_shared;
+        mv78xx0_ge11.dev.platform_data = eth_data;
+
+        platform_device_register(&mv78xx0_ge11_shared);
+        platform_device_register(&mv78xx0_ge11);
+}
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource mv78xx0_sata_resources[] = {
+        {
+                .name   = "sata base",
+                .start  = SATA_PHYS_BASE,
+                .end    = SATA_PHYS_BASE + 0x5000 - 1,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .name   = "sata irq",
+                .start  = IRQ_MV78XX0_SATA,
+                .end    = IRQ_MV78XX0_SATA,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mv78xx0_sata = {
+        .name           = "sata_mv",
+        .id             = 0,
+        .dev            = {
+                .coherent_dma_mask      = 0xffffffff,
+        },
+        .num_resources  = ARRAY_SIZE(mv78xx0_sata_resources),
+        .resource       = mv78xx0_sata_resources,
+};
+
+void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data)
+{
+        sata_data->dram = &mv78xx0_mbus_dram_info;
+        mv78xx0_sata.dev.platform_data = sata_data;
+        platform_device_register(&mv78xx0_sata);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port mv78xx0_uart0_data[] = {
+        {
+                .mapbase        = UART0_PHYS_BASE,
+                .membase        = (char *)UART0_VIRT_BASE,
+                .irq            = IRQ_MV78XX0_UART_0,
+                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = 0,
+        }, {
+        },
+};
+
+static struct resource mv78xx0_uart0_resources[] = {
+        {
+                .start          = UART0_PHYS_BASE,
+                .end            = UART0_PHYS_BASE + 0xff,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = IRQ_MV78XX0_UART_0,
+                .end            = IRQ_MV78XX0_UART_0,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mv78xx0_uart0 = {
+        .name                   = "serial8250",
+        .id                     = 0,
+        .dev                    = {
+                .platform_data  = mv78xx0_uart0_data,
+        },
+        .resource               = mv78xx0_uart0_resources,
+        .num_resources          = ARRAY_SIZE(mv78xx0_uart0_resources),
+};
+
+void __init mv78xx0_uart0_init(void)
+{
+        platform_device_register(&mv78xx0_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port mv78xx0_uart1_data[] = {
+        {
+                .mapbase        = UART1_PHYS_BASE,
+                .membase        = (char *)UART1_VIRT_BASE,
+                .irq            = IRQ_MV78XX0_UART_1,
+                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = 0,
+        }, {
+        },
+};
+
+static struct resource mv78xx0_uart1_resources[] = {
+        {
+                .start          = UART1_PHYS_BASE,
+                .end            = UART1_PHYS_BASE + 0xff,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = IRQ_MV78XX0_UART_1,
+                .end            = IRQ_MV78XX0_UART_1,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mv78xx0_uart1 = {
+        .name                   = "serial8250",
+        .id                     = 1,
+        .dev                    = {
+                .platform_data  = mv78xx0_uart1_data,
+        },
+        .resource               = mv78xx0_uart1_resources,
+        .num_resources          = ARRAY_SIZE(mv78xx0_uart1_resources),
+};
+
+void __init mv78xx0_uart1_init(void)
+{
+        platform_device_register(&mv78xx0_uart1);
+}
+
+
+/*****************************************************************************
+ * UART2
+ ****************************************************************************/
+static struct plat_serial8250_port mv78xx0_uart2_data[] = {
+        {
+                .mapbase        = UART2_PHYS_BASE,
+                .membase        = (char *)UART2_VIRT_BASE,
+                .irq            = IRQ_MV78XX0_UART_2,
+                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = 0,
+        }, {
+        },
+};
+
+static struct resource mv78xx0_uart2_resources[] = {
+        {
+                .start          = UART2_PHYS_BASE,
+                .end            = UART2_PHYS_BASE + 0xff,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = IRQ_MV78XX0_UART_2,
+                .end            = IRQ_MV78XX0_UART_2,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mv78xx0_uart2 = {
+        .name                   = "serial8250",
+        .id                     = 2,
+        .dev                    = {
+                .platform_data  = mv78xx0_uart2_data,
+        },
+        .resource               = mv78xx0_uart2_resources,
+        .num_resources          = ARRAY_SIZE(mv78xx0_uart2_resources),
+};
+
+void __init mv78xx0_uart2_init(void)
+{
+        platform_device_register(&mv78xx0_uart2);
+}
+
+
+/*****************************************************************************
+ * UART3
+ ****************************************************************************/
+static struct plat_serial8250_port mv78xx0_uart3_data[] = {
+        {
+                .mapbase        = UART3_PHYS_BASE,
+                .membase        = (char *)UART3_VIRT_BASE,
+                .irq            = IRQ_MV78XX0_UART_3,
+                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = 0,
+        }, {
+        },
+};
+
+static struct resource mv78xx0_uart3_resources[] = {
+        {
+                .start          = UART3_PHYS_BASE,
+                .end            = UART3_PHYS_BASE + 0xff,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = IRQ_MV78XX0_UART_3,
+                .end            = IRQ_MV78XX0_UART_3,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mv78xx0_uart3 = {
+        .name                   = "serial8250",
+        .id                     = 3,
+        .dev                    = {
+                .platform_data  = mv78xx0_uart3_data,
+        },
+        .resource               = mv78xx0_uart3_resources,
+        .num_resources          = ARRAY_SIZE(mv78xx0_uart3_resources),
+};
+
+void __init mv78xx0_uart3_init(void)
+{
+        platform_device_register(&mv78xx0_uart3);
+}
+
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static void mv78xx0_timer_init(void)
+{
+        orion_time_init(IRQ_MV78XX0_TIMER_1, get_tclk());
+}
+
+struct sys_timer mv78xx0_timer = {
+        .init = mv78xx0_timer_init,
+};
+
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+static int __init is_l2_writethrough(void)
+{
+        return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH);
+}
+
+void __init mv78xx0_init(void)
+{
+        int core_index;
+        int hclk;
+        int pclk;
+        int l2clk;
+        int tclk;
+
+        core_index = mv78xx0_core_index();
+        hclk = get_hclk();
+        get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
+        tclk = get_tclk();
+
+        printk(KERN_INFO "MV78xx0 core #%d, ", core_index);
+        printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
+        printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
+        printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
+        printk("TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+
+        mv78xx0_setup_cpu_mbus();
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+        feroceon_l2_init(is_l2_writethrough());
+#endif
+
+        mv78xx0_ge00_shared_data.t_clk = tclk;
+        mv78xx0_ge01_shared_data.t_clk = tclk;
+        mv78xx0_ge10_shared_data.t_clk = tclk;
+        mv78xx0_ge11_shared_data.t_clk = tclk;
+        mv78xx0_uart0_data[0].uartclk = tclk;
+        mv78xx0_uart1_data[0].uartclk = tclk;
+        mv78xx0_uart2_data[0].uartclk = tclk;
+        mv78xx0_uart3_data[0].uartclk = tclk;
+}
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
new file mode 100644
index 000000000000..78af5de319dd
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-mv78xx0/common.h
+ *
+ * Core functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_MV78XX0_COMMON_H
+#define __ARCH_MV78XX0_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+/*
+ * Basic MV78xx0 init functions used early by machine-setup.
+ */
+int mv78xx0_core_index(void);
+void mv78xx0_map_io(void);
+void mv78xx0_init(void);
+void mv78xx0_init_irq(void);
+
+extern struct mbus_dram_target_info mv78xx0_mbus_dram_info;
+void mv78xx0_setup_cpu_mbus(void);
+void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
+                               int maj, int min);
+void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
+                                int maj, int min);
+
+void mv78xx0_ehci0_init(void);
+void mv78xx0_ehci1_init(void);
+void mv78xx0_ehci2_init(void);
+void mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_pcie_init(int init_port0, int init_port1);
+void mv78xx0_sata_init(struct mv_sata_platform_data *sata_data);
+void mv78xx0_uart0_init(void);
+void mv78xx0_uart1_init(void);
+void mv78xx0_uart2_init(void);
+void mv78xx0_uart3_init(void);
+
+extern struct sys_timer mv78xx0_timer;
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
new file mode 100644
index 000000000000..0c93d19193df
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -0,0 +1,94 @@
+/*
+ * arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+ *
+ * Marvell DB-78x00-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/arch/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data db78x00_ge00_data = {
+        .phy_addr       = 8,
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge01_data = {
+        .phy_addr       = 9,
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge10_data = {
+        .phy_addr       = -1,
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge11_data = {
+        .phy_addr       = -1,
+};
+
+static struct mv_sata_platform_data db78x00_sata_data = {
+        .n_ports        = 2,
+};
+
+static void __init db78x00_init(void)
+{
+        /*
+         * Basic MV78xx0 setup. Needs to be called early.
+         */
+        mv78xx0_init();
+
+        /*
+         * Partition on-chip peripherals between the two CPU cores.
+         */
+        if (mv78xx0_core_index() == 0) {
+                mv78xx0_ehci0_init();
+                mv78xx0_ehci1_init();
+                mv78xx0_ehci2_init();
+                mv78xx0_ge00_init(&db78x00_ge00_data);
+                mv78xx0_ge01_init(&db78x00_ge01_data);
+                mv78xx0_ge10_init(&db78x00_ge10_data);
+                mv78xx0_ge11_init(&db78x00_ge11_data);
+                mv78xx0_sata_init(&db78x00_sata_data);
+                mv78xx0_uart0_init();
+                mv78xx0_uart2_init();
+        } else {
+                mv78xx0_uart1_init();
+                mv78xx0_uart3_init();
+        }
+}
+
+static int __init db78x00_pci_init(void)
+{
+        if (machine_is_db78x00_bp()) {
+                /*
+                 * Assign the x16 PCIe slot on the board to CPU core
+                 * #0, and let CPU core #1 have the four x1 slots.
+                 */
+                if (mv78xx0_core_index() == 0)
+                        mv78xx0_pcie_init(0, 1);
+                else
+                        mv78xx0_pcie_init(1, 0);
+        }
+
+        return 0;
+}
+subsys_initcall(db78x00_pci_init);
+
+MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
+        /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+        .phys_io        = MV78XX0_REGS_PHYS_BASE,
+        .io_pg_offst    = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = db78x00_init,
+        .map_io         = mv78xx0_map_io,
+        .init_irq       = mv78xx0_init_irq,
+        .timer          = &mv78xx0_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
new file mode 100644
index 000000000000..60f4ee4d4532
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-mv78xx0/irq.c
+ *
+ * MV78xx0 IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/arch/mv78xx0.h>
+#include <asm/plat-orion/irq.h>
+#include "common.h"
+
+void __init mv78xx0_init_irq(void)
+{
+        orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+        orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+}
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
new file mode 100644
index 000000000000..b78e1443159f
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -0,0 +1,312 @@
+/*
+ * arch/arm/mach-mv78xx0/pcie.c
+ *
+ * PCIe functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/plat-orion/pcie.h>
+#include "common.h"
+
+struct pcie_port {
+        u8                      maj;
+        u8                      min;
+        u8                      root_bus_nr;
+        void __iomem            *base;
+        spinlock_t              conf_lock;
+        char                    io_space_name[16];
+        char                    mem_space_name[16];
+        struct resource         res[2];
+};
+
+static struct pcie_port pcie_port[8];
+static int num_pcie_ports;
+static struct resource pcie_io_space;
+static struct resource pcie_mem_space;
+
+
+static void __init mv78xx0_pcie_preinit(void)
+{
+        int i;
+        u32 size_each;
+        u32 start;
+        int win;
+
+        pcie_io_space.name = "PCIe I/O Space";
+        pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
+        pcie_io_space.end =
+                MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1;
+        pcie_io_space.flags = IORESOURCE_IO;
+        if (request_resource(&iomem_resource, &pcie_io_space))
+                panic("can't allocate PCIe I/O space");
+
+        pcie_mem_space.name = "PCIe MEM Space";
+        pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE;
+        pcie_mem_space.end =
+                MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1;
+        pcie_mem_space.flags = IORESOURCE_MEM;
+        if (request_resource(&iomem_resource, &pcie_mem_space))
+                panic("can't allocate PCIe MEM space");
+
+        for (i = 0; i < num_pcie_ports; i++) {
+                struct pcie_port *pp = pcie_port + i;
+
+                snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+                        "PCIe %d.%d I/O", pp->maj, pp->min);
+                pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+                pp->res[0].name = pp->io_space_name;
+                pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i);
+                pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1;
+                pp->res[0].flags = IORESOURCE_IO;
+
+                snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+                        "PCIe %d.%d MEM", pp->maj, pp->min);
+                pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+                pp->res[1].name = pp->mem_space_name;
+                pp->res[1].flags = IORESOURCE_MEM;
+        }
+
+        switch (num_pcie_ports) {
+        case 0:
+                size_each = 0;
+                break;
+
+        case 1:
+                size_each = 0x30000000;
+                break;
+
+        case 2 ... 3:
+                size_each = 0x10000000;
+                break;
+
+        case 4 ... 6:
+                size_each = 0x08000000;
+                break;
+
+        case 7:
+                size_each = 0x04000000;
+                break;
+
+        default:
+                panic("invalid number of PCIe ports");
+        }
+
+        start = MV78XX0_PCIE_MEM_PHYS_BASE;
+        for (i = 0; i < num_pcie_ports; i++) {
+                struct pcie_port *pp = pcie_port + i;
+
+                pp->res[1].start = start;
+                pp->res[1].end = start + size_each - 1;
+                start += size_each;
+        }
+
+        for (i = 0; i < num_pcie_ports; i++) {
+                struct pcie_port *pp = pcie_port + i;
+
+                if (request_resource(&pcie_io_space, &pp->res[0]))
+                        panic("can't allocate PCIe I/O sub-space");
+
+                if (request_resource(&pcie_mem_space, &pp->res[1]))
+                        panic("can't allocate PCIe MEM sub-space");
+        }
+
+        win = 0;
+        for (i = 0; i < num_pcie_ports; i++) {
+                struct pcie_port *pp = pcie_port + i;
+
+                mv78xx0_setup_pcie_io_win(win++, pp->res[0].start,
+                        pp->res[0].end - pp->res[0].start + 1,
+                        pp->maj, pp->min);
+
+                mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start,
+                        pp->res[1].end - pp->res[1].start + 1,
+                        pp->maj, pp->min);
+        }
+}
+
+static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+        struct pcie_port *pp;
+
+        if (nr >= num_pcie_ports)
+                return 0;
+
+        pp = &pcie_port[nr];
+        pp->root_bus_nr = sys->busnr;
+
+        /*
+         * Generic PCIe unit setup.
+         */
+        orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+        orion_pcie_setup(pp->base, &mv78xx0_mbus_dram_info);
+
+        sys->resource[0] = &pp->res[0];
+        sys->resource[1] = &pp->res[1];
+        sys->resource[2] = NULL;
+
+        return 1;
+}
+
+static struct pcie_port *bus_to_port(int bus)
+{
+        int i;
+
+        for (i = num_pcie_ports - 1; i >= 0; i--) {
+                int rbus = pcie_port[i].root_bus_nr;
+                if (rbus != -1 && rbus <= bus)
+                        break;
+        }
+
+        return i >= 0 ? pcie_port + i : NULL;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+        /*
+         * Don't go out when trying to access nonexisting devices
+         * on the local bus.
+         */
+        if (bus == pp->root_bus_nr && dev > 1)
+                return 0;
+
+        return 1;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+                        int size, u32 *val)
+{
+        struct pcie_port *pp = bus_to_port(bus->number);
+        unsigned long flags;
+        int ret;
+
+        if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+                *val = 0xffffffff;
+                return PCIBIOS_DEVICE_NOT_FOUND;
+        }
+
+        spin_lock_irqsave(&pp->conf_lock, flags);
+        ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+        spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+        return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+                        int where, int size, u32 val)
+{
+        struct pcie_port *pp = bus_to_port(bus->number);
+        unsigned long flags;
+        int ret;
+
+        if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+                return PCIBIOS_DEVICE_NOT_FOUND;
+
+        spin_lock_irqsave(&pp->conf_lock, flags);
+        ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+        spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+        return ret;
+}
+
+static struct pci_ops pcie_ops = {
+        .read = pcie_rd_conf,
+        .write = pcie_wr_conf,
+};
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+        /*
+         * Prevent enumeration of root complex.
+         */
+        if (dev->bus->parent == NULL && dev->devfn == 0) {
+                int i;
+
+                for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+                        dev->resource[i].start = 0;
+                        dev->resource[i].end   = 0;
+                        dev->resource[i].flags = 0;
+                }
+        }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+        struct pci_bus *bus;
+
+        if (nr < num_pcie_ports) {
+                bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+        } else {
+                bus = NULL;
+                BUG();
+        }
+
+        return bus;
+}
+
+static int __init mv78xx0_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        struct pcie_port *pp = bus_to_port(dev->bus->number);
+
+        return IRQ_MV78XX0_PCIE_00 + (pp->maj << 2) + pp->min;
+}
+
+static struct hw_pci mv78xx0_pci __initdata = {
+        .nr_controllers = 8,
+        .preinit        = mv78xx0_pcie_preinit,
+        .swizzle        = pci_std_swizzle,
+        .setup          = mv78xx0_pcie_setup,
+        .scan           = mv78xx0_pcie_scan_bus,
+        .map_irq        = mv78xx0_pcie_map_irq,
+};
+
+static void __init add_pcie_port(int maj, int min, unsigned long base)
+{
+        printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
+
+        if (orion_pcie_link_up((void __iomem *)base)) {
+                struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+
+                printk("link up\n");
+
+                pp->maj = maj;
+                pp->min = min;
+                pp->root_bus_nr = -1;
+                pp->base = (void __iomem *)base;
+                spin_lock_init(&pp->conf_lock);
+                memset(pp->res, 0, sizeof(pp->res));
+        } else {
+                printk("link down, ignoring\n");
+        }
+}
+
+void __init mv78xx0_pcie_init(int init_port0, int init_port1)
+{
+        if (init_port0) {
+                add_pcie_port(0, 0, PCIE00_VIRT_BASE);
+                if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
+                        add_pcie_port(0, 1, PCIE01_VIRT_BASE);
+                        add_pcie_port(0, 2, PCIE02_VIRT_BASE);
+                        add_pcie_port(0, 3, PCIE03_VIRT_BASE);
+                }
+        }
+
+        if (init_port1) {
+                add_pcie_port(1, 0, PCIE10_VIRT_BASE);
+                if (!orion_pcie_x4_mode((void __iomem *)PCIE10_VIRT_BASE)) {
+                        add_pcie_port(1, 1, PCIE11_VIRT_BASE);
+                        add_pcie_port(1, 2, PCIE12_VIRT_BASE);
+                        add_pcie_port(1, 3, PCIE13_VIRT_BASE);
+                }
+        }
+
+        pci_common_init(&mv78xx0_pci);
+}
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
new file mode 100644
index 000000000000..1eaa97cb716d
--- /dev/null
+++ b/arch/arm/mach-mx2/Kconfig
@@ -0,0 +1,39 @@
+comment "MX2 family CPU support"
+        depends on ARCH_MX2
+
+config MACH_MX27
+        bool "i.MX27 support"
+        depends on ARCH_MX2
+        help
+          This enables support for Freescale's MX2 based i.MX27 processor.
+
+comment "MX2 Platforms"
+        depends on ARCH_MX2
+
+config MACH_MX27ADS
+        bool "MX27ADS platform"
+        depends on MACH_MX27
+        help
+          Include support for MX27ADS platform. This includes specific
+          configurations for the board and its peripherals.
+
+config MACH_PCM038
+        bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
+        depends on MACH_MX27
+        help
+          Include support for phyCORE-i.MX27 (aka pcm038) platform. This
+          includes specific configurations for the module and its peripherals.
+
+choice
+        prompt "Baseboard"
+        depends on MACH_PCM038
+        default MACH_PCM970_BASEBOARD
+
+config MACH_PCM970_BASEBOARD
+        prompt "PHYTEC PCM970 development board"
+        bool
+        help
+          This adds board specific devices that can be found on Phytec's
+          PCM970 evaluation board.
+
+endchoice
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
new file mode 100644
index 000000000000..382d86080e86
--- /dev/null
+++ b/arch/arm/mach-mx2/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y   :=  system.o generic.o devices.o serial.o
+
+obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
+obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+
+obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += pcm038.o
+obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-mx2/Makefile.boot
new file mode 100644
index 000000000000..696831dcd485
--- /dev/null
+++ b/arch/arm/mach-mx2/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y   := 0xA0008000
+params_phys-y   := 0xA0000100
+initrd_phys-y   := 0xA0800000
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
new file mode 100644
index 000000000000..0a29ef29c73a
--- /dev/null
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -0,0 +1,1626 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/common.h>
+#include <asm/div64.h>
+#include <asm/mach-types.h>
+
+#include "crm_regs.h"
+
+static struct clk ckil_clk;
+static struct clk mpll_clk;
+static struct clk mpll_main_clk[];
+static struct clk spll_clk;
+
+static int _clk_enable(struct clk *clk)
+{
+        unsigned long reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg |= 1 << clk->enable_shift;
+        __raw_writel(reg, clk->enable_reg);
+
+        return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+        unsigned long reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg &= ~(1 << clk->enable_shift);
+        __raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_spll_enable(struct clk *clk)
+{
+        unsigned long reg;
+
+        reg = __raw_readl(CCM_CSCR);
+        reg |= CCM_CSCR_SPEN;
+        __raw_writel(reg, CCM_CSCR);
+
+        while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
+                ;
+
+        return 0;
+}
+
+static void _clk_spll_disable(struct clk *clk)
+{
+        unsigned long reg;
+
+        reg = __raw_readl(CCM_CSCR);
+        reg &= ~CCM_CSCR_SPEN;
+        __raw_writel(reg, CCM_CSCR);
+}
+
+static void _clk_pccr01_enable(unsigned long mask0, unsigned long mask1)
+{
+        unsigned long reg;
+
+        reg = __raw_readl(CCM_PCCR0);
+        reg |= mask0;
+        __raw_writel(reg, CCM_PCCR0);
+
+        reg = __raw_readl(CCM_PCCR1);
+        reg |= mask1;
+        __raw_writel(reg, CCM_PCCR1);
+
+}
+
+static void _clk_pccr01_disable(unsigned long mask0, unsigned long mask1)
+{
+        unsigned long reg;
+
+        reg = __raw_readl(CCM_PCCR0);
+        reg &= ~mask0;
+        __raw_writel(reg, CCM_PCCR0);
+
+        reg = __raw_readl(CCM_PCCR1);
+        reg &= ~mask1;
+        __raw_writel(reg, CCM_PCCR1);
+}
+
+static void _clk_pccr10_enable(unsigned long mask1, unsigned long mask0)
+{
+        unsigned long reg;
+
+        reg = __raw_readl(CCM_PCCR1);
+        reg |= mask1;
+        __raw_writel(reg, CCM_PCCR1);
+
+        reg = __raw_readl(CCM_PCCR0);
+        reg |= mask0;
+        __raw_writel(reg, CCM_PCCR0);
+}
+
+static void _clk_pccr10_disable(unsigned long mask1, unsigned long mask0)
+{
+        unsigned long reg;
+
+        reg = __raw_readl(CCM_PCCR1);
+        reg &= ~mask1;
+        __raw_writel(reg, CCM_PCCR1);
+
+        reg = __raw_readl(CCM_PCCR0);
+        reg &= ~mask0;
+        __raw_writel(reg, CCM_PCCR0);
+}
+
+static int _clk_dma_enable(struct clk *clk)
+{
+        _clk_pccr01_enable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
+
+        return 0;
+}
+
+static void _clk_dma_disable(struct clk *clk)
+{
+        _clk_pccr01_disable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
+}
+
+static int _clk_rtic_enable(struct clk *clk)
+{
+        _clk_pccr01_enable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
+
+        return 0;
+}
+
+static void _clk_rtic_disable(struct clk *clk)
+{
+        _clk_pccr01_disable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
+}
+
+static int _clk_emma_enable(struct clk *clk)
+{
+        _clk_pccr01_enable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
+
+        return 0;
+}
+
+static void _clk_emma_disable(struct clk *clk)
+{
+        _clk_pccr01_disable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
+}
+
+static int _clk_slcdc_enable(struct clk *clk)
+{
+        _clk_pccr01_enable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
+
+        return 0;
+}
+
+static void _clk_slcdc_disable(struct clk *clk)
+{
+        _clk_pccr01_disable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
+}
+
+static int _clk_fec_enable(struct clk *clk)
+{
+        _clk_pccr01_enable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
+
+        return 0;
+}
+
+static void _clk_fec_disable(struct clk *clk)
+{
+        _clk_pccr01_disable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
+}
+
+static int _clk_vpu_enable(struct clk *clk)
+{
+        unsigned long reg;
+
+        reg = __raw_readl(CCM_PCCR1);
+        reg |= CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK;
+        __raw_writel(reg, CCM_PCCR1);
+
+        return 0;
+}
+
+static void _clk_vpu_disable(struct clk *clk)
+{
+        unsigned long reg;
+
+        reg = __raw_readl(CCM_PCCR1);
+        reg &= ~(CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK);
+        __raw_writel(reg, CCM_PCCR1);
+}
+
+static int _clk_sahara2_enable(struct clk *clk)
+{
+        _clk_pccr01_enable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
+
+        return 0;
+}
+
+static void _clk_sahara2_disable(struct clk *clk)
+{
+        _clk_pccr01_disable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
+}
+
+static int _clk_mstick1_enable(struct clk *clk)
+{
+        _clk_pccr10_enable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
+
+        return 0;
+}
+
+static void _clk_mstick1_disable(struct clk *clk)
+{
+        _clk_pccr10_disable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
+}
+
+#define CSCR() (__raw_readl(CCM_CSCR))
+#define PCDR0() (__raw_readl(CCM_PCDR0))
+#define PCDR1() (__raw_readl(CCM_PCDR1))
+
+static int _clk_cpu_set_parent(struct clk *clk, struct clk *parent)
+{
+        int cscr = CSCR();
+
+        if (clk->parent == parent)
+                return 0;
+
+        if (mx27_revision() >= CHIP_REV_2_0) {
+                if (parent == &mpll_main_clk[0]) {
+                        cscr |= CCM_CSCR_ARM_SRC;
+                } else {
+                        if (parent == &mpll_main_clk[1])
+                                cscr &= ~CCM_CSCR_ARM_SRC;
+                        else
+                                return -EINVAL;
+                }
+                __raw_writel(cscr, CCM_CSCR);
+        } else
+                return -ENODEV;
+
+        clk->parent = parent;
+        return 0;
+}
+
+static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate)
+{
+        int div;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        div = parent_rate / rate;
+        if (parent_rate % rate)
+                div++;
+
+        if (div > 4)
+                div = 4;
+
+        return parent_rate / div;
+}
+
+static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned int div;
+        uint32_t reg;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        div = parent_rate / rate;
+
+        if (div > 4 || div < 1 || ((parent_rate / div) != rate))
+                return -EINVAL;
+
+        div--;
+
+        reg = __raw_readl(CCM_CSCR);
+        if (mx27_revision() >= CHIP_REV_2_0) {
+                reg &= ~CCM_CSCR_ARM_MASK;
+                reg |= div << CCM_CSCR_ARM_OFFSET;
+                reg &= ~0x06;
+                __raw_writel(reg | 0x80000000, CCM_CSCR);
+        } else {
+                printk(KERN_ERR "Cant set CPU frequency!\n");
+        }
+
+        return 0;
+}
+
+static unsigned long _clk_perclkx_round_rate(struct clk *clk,
+                                             unsigned long rate)
+{
+        u32 div;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        div = parent_rate / rate;
+        if (parent_rate % rate)
+                div++;
+
+        if (div > 64)
+                div = 64;
+
+        return parent_rate / div;
+}
+
+static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+{
+        u32 reg;
+        u32 div;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        if (clk->id < 0 || clk->id > 3)
+                return -EINVAL;
+
+        div = parent_rate / rate;
+        if (div > 64 || div < 1 || ((parent_rate / div) != rate))
+                return -EINVAL;
+        div--;
+
+        reg =
+            __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
+                                       (clk->id << 3));
+        reg |= div << (clk->id << 3);
+        __raw_writel(reg, CCM_PCDR1);
+
+        return 0;
+}
+
+static unsigned long _clk_usb_recalc(struct clk *clk)
+{
+        unsigned long usb_pdf;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+
+        return parent_rate / (usb_pdf + 1U);
+}
+
+static unsigned long _clk_ssi1_recalc(struct clk *clk)
+{
+        unsigned long ssi1_pdf;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        ssi1_pdf = (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK) >>
+                                        CCM_PCDR0_SSI1BAUDDIV_OFFSET;
+
+        if (mx27_revision() >= CHIP_REV_2_0)
+                ssi1_pdf += 4;
+        else
+                ssi1_pdf = (ssi1_pdf < 2) ? 124UL : ssi1_pdf;
+
+        return 2UL * parent_rate / ssi1_pdf;
+}
+
+static unsigned long _clk_ssi2_recalc(struct clk *clk)
+{
+        unsigned long ssi2_pdf;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        ssi2_pdf = (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
+            CCM_PCDR0_SSI2BAUDDIV_OFFSET;
+
+        if (mx27_revision() >= CHIP_REV_2_0)
+                ssi2_pdf += 4;
+        else
+                ssi2_pdf = (ssi2_pdf < 2) ? 124UL : ssi2_pdf;
+
+        return 2UL * parent_rate / ssi2_pdf;
+}
+
+static unsigned long _clk_nfc_recalc(struct clk *clk)
+{
+        unsigned long nfc_pdf;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        if (mx27_revision() >= CHIP_REV_2_0) {
+                nfc_pdf =
+                    (PCDR0() & CCM_PCDR0_NFCDIV2_MASK) >>
+                    CCM_PCDR0_NFCDIV2_OFFSET;
+        } else {
+                nfc_pdf =
+                    (PCDR0() & CCM_PCDR0_NFCDIV_MASK) >>
+                    CCM_PCDR0_NFCDIV_OFFSET;
+        }
+
+        return parent_rate / (nfc_pdf + 1);
+}
+
+static unsigned long _clk_vpu_recalc(struct clk *clk)
+{
+        unsigned long vpu_pdf;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        if (mx27_revision() >= CHIP_REV_2_0) {
+                vpu_pdf =
+                    (PCDR0() & CCM_PCDR0_VPUDIV2_MASK) >>
+                    CCM_PCDR0_VPUDIV2_OFFSET;
+                vpu_pdf += 4;
+        } else {
+                vpu_pdf =
+                    (PCDR0() & CCM_PCDR0_VPUDIV_MASK) >>
+                    CCM_PCDR0_VPUDIV_OFFSET;
+                vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
+        }
+        return 2UL * parent_rate / vpu_pdf;
+}
+
+static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+{
+        return clk->parent->round_rate(clk->parent, rate);
+}
+
+static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+{
+        return clk->parent->set_rate(clk->parent, rate);
+}
+
+/* in Hz */
+static unsigned long external_high_reference = 26000000;
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+        return external_high_reference;
+}
+
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz. Could be changed at runtime
+ * with a call to change_external_high_reference()
+ */
+static struct clk ckih_clk = {
+        .name = "ckih",
+        .get_rate = get_high_reference_clock_rate,
+};
+
+/* in Hz */
+static unsigned long external_low_reference = 32768;
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+        return external_low_reference;
+}
+
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz Could be changed at runtime
+ * with a call to change_external_low_reference()
+ */
+static struct clk ckil_clk = {
+        .name = "ckil",
+        .get_rate = get_low_reference_clock_rate,
+};
+
+static unsigned long get_mpll_clk(struct clk *clk)
+{
+        uint32_t reg;
+        unsigned long ref_clk;
+        unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+        unsigned long long temp;
+
+        ref_clk = clk_get_rate(clk->parent);
+
+        reg = __raw_readl(CCM_MPCTL0);
+        pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET;
+        mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
+        mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
+        mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
+
+        mfi = (mfi <= 5) ? 5 : mfi;
+        temp = 2LL * ref_clk * mfn;
+        do_div(temp, mfd + 1);
+        temp = 2LL * ref_clk * mfi + temp;
+        do_div(temp, pdf + 1);
+
+        return (unsigned long)temp;
+}
+
+static struct clk mpll_clk = {
+        .name = "mpll",
+        .parent = &ckih_clk,
+        .get_rate = get_mpll_clk,
+};
+
+static unsigned long _clk_mpll_main_get_rate(struct clk *clk)
+{
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        /* i.MX27 TO2:
+         * clk->id == 0: arm clock source path 1 which is from 2*MPLL/DIV_2
+         * clk->id == 1: arm clock source path 2 which is from 2*MPLL/DIV_3
+         */
+
+        if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
+                return 2UL * parent_rate / 3UL;
+
+        return parent_rate;
+}
+
+static struct clk mpll_main_clk[] = {
+        {
+                /* For i.MX27 TO2, it is the MPLL path 1 of ARM core
+                 * It provide the clock source whose rate is same as MPLL
+                 */
+                .name = "mpll_main",
+                .id = 0,
+                .parent = &mpll_clk,
+                .get_rate = _clk_mpll_main_get_rate
+        }, {
+                /* For i.MX27 TO2, it is the MPLL path 2 of ARM core
+                 * It provide the clock source whose rate is same MPLL * 2/3
+                 */
+                .name = "mpll_main",
+                .id = 1,
+                .parent = &mpll_clk,
+                .get_rate = _clk_mpll_main_get_rate
+        }
+};
+
+static unsigned long get_spll_clk(struct clk *clk)
+{
+        uint32_t reg;
+        unsigned long ref_clk;
+        unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+        unsigned long long temp;
+
+        ref_clk = clk_get_rate(clk->parent);
+
+        reg = __raw_readl(CCM_SPCTL0);
+        /*TODO: This is TO2 Bug */
+        if (mx27_revision() >= CHIP_REV_2_0)
+                __raw_writel(reg, CCM_SPCTL0);
+
+        pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
+        mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
+        mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
+        mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
+
+        mfi = (mfi <= 5) ? 5 : mfi;
+        temp = 2LL * ref_clk * mfn;
+        do_div(temp, mfd + 1);
+        temp = 2LL * ref_clk * mfi + temp;
+        do_div(temp, pdf + 1);
+
+        return (unsigned long)temp;
+}
+
+static struct clk spll_clk = {
+        .name = "spll",
+        .parent = &ckih_clk,
+        .get_rate = get_spll_clk,
+        .enable = _clk_spll_enable,
+        .disable = _clk_spll_disable,
+};
+
+static unsigned long get_cpu_clk(struct clk *clk)
+{
+        u32 div;
+        unsigned long rate;
+
+        if (mx27_revision() >= CHIP_REV_2_0)
+                div = (CSCR() & CCM_CSCR_ARM_MASK) >> CCM_CSCR_ARM_OFFSET;
+        else
+                div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
+
+        rate = clk_get_rate(clk->parent);
+        return rate / (div + 1);
+}
+
+static struct clk cpu_clk = {
+        .name = "cpu_clk",
+        .parent = &mpll_main_clk[1],
+        .set_parent = _clk_cpu_set_parent,
+        .round_rate = _clk_cpu_round_rate,
+        .get_rate = get_cpu_clk,
+        .set_rate = _clk_cpu_set_rate,
+};
+
+static unsigned long get_ahb_clk(struct clk *clk)
+{
+        unsigned long rate;
+        unsigned long bclk_pdf;
+
+        if (mx27_revision() >= CHIP_REV_2_0)
+                bclk_pdf = (CSCR() & CCM_CSCR_AHB_MASK)
+                                        >> CCM_CSCR_AHB_OFFSET;
+        else
+                bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
+                                        >> CCM_CSCR_BCLK_OFFSET;
+
+        rate = clk_get_rate(clk->parent);
+        return rate / (bclk_pdf + 1);
+}
+
+static struct clk ahb_clk = {
+        .name = "ahb_clk",
+        .parent = &mpll_main_clk[1],
+        .get_rate = get_ahb_clk,
+};
+
+static unsigned long get_ipg_clk(struct clk *clk)
+{
+        unsigned long rate;
+        unsigned long ipg_pdf;
+
+        if (mx27_revision() >= CHIP_REV_2_0)
+                return clk_get_rate(clk->parent);
+        else
+                ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
+
+        rate = clk_get_rate(clk->parent);
+        return rate / (ipg_pdf + 1);
+}
+
+static struct clk ipg_clk = {
+        .name = "ipg_clk",
+        .parent = &ahb_clk,
+        .get_rate = get_ipg_clk,
+};
+
+static unsigned long _clk_perclkx_recalc(struct clk *clk)
+{
+        unsigned long perclk_pdf;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        if (clk->id < 0 || clk->id > 3)
+                return 0;
+
+        perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
+
+        return parent_rate / (perclk_pdf + 1);
+}
+
+static struct clk per_clk[] = {
+        {
+                .name = "per_clk",
+                .id = 0,
+                .parent = &mpll_main_clk[1],
+                .get_rate = _clk_perclkx_recalc,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_PERCLK1_OFFSET,
+                .disable = _clk_disable,
+        }, {
+                .name = "per_clk",
+                .id = 1,
+                .parent = &mpll_main_clk[1],
+                .get_rate = _clk_perclkx_recalc,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_PERCLK2_OFFSET,
+                .disable = _clk_disable,
+        }, {
+                .name = "per_clk",
+                .id = 2,
+                .parent = &mpll_main_clk[1],
+                .round_rate = _clk_perclkx_round_rate,
+                .set_rate = _clk_perclkx_set_rate,
+                .get_rate = _clk_perclkx_recalc,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_PERCLK3_OFFSET,
+                .disable = _clk_disable,
+        }, {
+                .name = "per_clk",
+                .id = 3,
+                .parent = &mpll_main_clk[1],
+                .round_rate = _clk_perclkx_round_rate,
+                .set_rate = _clk_perclkx_set_rate,
+                .get_rate = _clk_perclkx_recalc,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_PERCLK4_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+struct clk uart1_clk[] = {
+        {
+                .name = "uart_clk",
+                .id = 0,
+                .parent = &per_clk[0],
+                .secondary = &uart1_clk[1],
+        }, {
+                .name = "uart_ipg_clk",
+                .id = 0,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_UART1_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+struct clk uart2_clk[] = {
+        {
+                .name = "uart_clk",
+                .id = 1,
+                .parent = &per_clk[0],
+                .secondary = &uart2_clk[1],
+        }, {
+                .name = "uart_ipg_clk",
+                .id = 1,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_UART2_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+struct clk uart3_clk[] = {
+        {
+                .name = "uart_clk",
+                .id = 2,
+                .parent = &per_clk[0],
+                .secondary = &uart3_clk[1],
+        }, {
+                .name = "uart_ipg_clk",
+                .id = 2,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_UART3_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+struct clk uart4_clk[] = {
+        {
+                .name = "uart_clk",
+                .id = 3,
+                .parent = &per_clk[0],
+                .secondary = &uart4_clk[1],
+        }, {
+                .name = "uart_ipg_clk",
+                .id = 3,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_UART4_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+struct clk uart5_clk[] = {
+        {
+                .name = "uart_clk",
+                .id = 4,
+                .parent = &per_clk[0],
+                .secondary = &uart5_clk[1],
+        }, {
+                .name = "uart_ipg_clk",
+                .id = 4,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_UART5_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+struct clk uart6_clk[] = {
+        {
+                .name = "uart_clk",
+                .id = 5,
+                .parent = &per_clk[0],
+                .secondary = &uart6_clk[1],
+        }, {
+                .name = "uart_ipg_clk",
+                .id = 5,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_UART6_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk gpt1_clk[] = {
+        {
+                .name = "gpt_clk",
+                .id = 0,
+                .parent = &per_clk[0],
+                .secondary = &gpt1_clk[1],
+        }, {
+                .name = "gpt_ipg_clk",
+                .id = 0,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_GPT1_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk gpt2_clk[] = {
+        {
+                .name = "gpt_clk",
+                .id = 1,
+                .parent = &per_clk[0],
+                .secondary = &gpt2_clk[1],
+        }, {
+                .name = "gpt_ipg_clk",
+                .id = 1,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_GPT2_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk gpt3_clk[] = {
+        {
+                .name = "gpt_clk",
+                .id = 2,
+                .parent = &per_clk[0],
+                .secondary = &gpt3_clk[1],
+        }, {
+                .name = "gpt_ipg_clk",
+                .id = 2,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_GPT3_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk gpt4_clk[] = {
+        {
+                .name = "gpt_clk",
+                .id = 3,
+                .parent = &per_clk[0],
+                .secondary = &gpt4_clk[1],
+        }, {
+                .name = "gpt_ipg_clk",
+                .id = 3,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_GPT4_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk gpt5_clk[] = {
+        {
+                .name = "gpt_clk",
+                .id = 4,
+                .parent = &per_clk[0],
+                .secondary = &gpt5_clk[1],
+        }, {
+                .name = "gpt_ipg_clk",
+                .id = 4,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_GPT5_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk gpt6_clk[] = {
+        {
+                .name = "gpt_clk",
+                .id = 5,
+                .parent = &per_clk[0],
+                .secondary = &gpt6_clk[1],
+        }, {
+                .name = "gpt_ipg_clk",
+                .id = 5,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_GPT6_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk pwm_clk[] = {
+        {
+                .name = "pwm_clk",
+                .parent = &per_clk[0],
+                .secondary = &pwm_clk[1],
+        }, {
+                .name = "pwm_clk",
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_PWM_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk sdhc1_clk[] = {
+        {
+                .name = "sdhc_clk",
+                .id = 0,
+                .parent = &per_clk[1],
+                .secondary = &sdhc1_clk[1],
+        }, {
+                .name = "sdhc_ipg_clk",
+                .id = 0,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_SDHC1_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk sdhc2_clk[] = {
+        {
+                .name = "sdhc_clk",
+                .id = 1,
+                .parent = &per_clk[1],
+                .secondary = &sdhc2_clk[1],
+        }, {
+                .name = "sdhc_ipg_clk",
+                .id = 1,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_SDHC2_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk sdhc3_clk[] = {
+        {
+                .name = "sdhc_clk",
+                .id = 2,
+                .parent = &per_clk[1],
+                .secondary = &sdhc3_clk[1],
+        }, {
+                .name = "sdhc_ipg_clk",
+                .id = 2,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_SDHC3_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk cspi1_clk[] = {
+        {
+                .name = "cspi_clk",
+                .id = 0,
+                .parent = &per_clk[1],
+                .secondary = &cspi1_clk[1],
+        }, {
+                .name = "cspi_ipg_clk",
+                .id = 0,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_CSPI1_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk cspi2_clk[] = {
+        {
+                .name = "cspi_clk",
+                .id = 1,
+                .parent = &per_clk[1],
+                .secondary = &cspi2_clk[1],
+        }, {
+                .name = "cspi_ipg_clk",
+                .id = 1,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_CSPI2_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk cspi3_clk[] = {
+        {
+                .name = "cspi_clk",
+                .id = 2,
+                .parent = &per_clk[1],
+                .secondary = &cspi3_clk[1],
+        }, {
+                .name = "cspi_ipg_clk",
+                .id = 2,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_CSPI3_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk lcdc_clk[] = {
+        {
+                .name = "lcdc_clk",
+                .parent = &per_clk[2],
+                .secondary = &lcdc_clk[1],
+                .round_rate = _clk_parent_round_rate,
+                .set_rate = _clk_parent_set_rate,
+        }, {
+                .name = "lcdc_ipg_clk",
+                .parent = &ipg_clk,
+                .secondary = &lcdc_clk[2],
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_LCDC_OFFSET,
+                .disable = _clk_disable,
+        }, {
+                .name = "lcdc_ahb_clk",
+                .parent = &ahb_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_HCLK_LCDC_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk csi_clk[] = {
+        {
+                .name = "csi_perclk",
+                .parent = &per_clk[3],
+                .secondary = &csi_clk[1],
+                .round_rate = _clk_parent_round_rate,
+                .set_rate = _clk_parent_set_rate,
+        }, {
+                .name = "csi_ahb_clk",
+                .parent = &ahb_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_HCLK_CSI_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk usb_clk[] = {
+        {
+                .name = "usb_clk",
+                .parent = &spll_clk,
+                .get_rate = _clk_usb_recalc,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_USBOTG_OFFSET,
+                .disable = _clk_disable,
+        }, {
+                .name = "usb_ahb_clk",
+                .parent = &ahb_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_HCLK_USBOTG_OFFSET,
+                .disable = _clk_disable,
+        }
+};
+
+static struct clk ssi1_clk[] = {
+        {
+                .name = "ssi_clk",
+                .id = 0,
+                .parent = &mpll_main_clk[1],
+                .secondary = &ssi1_clk[1],
+                .get_rate = _clk_ssi1_recalc,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_SSI1_BAUD_OFFSET,
+                .disable = _clk_disable,
+        }, {
+                .name = "ssi_ipg_clk",
+                .id = 0,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_SSI1_IPG_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk ssi2_clk[] = {
+        {
+                .name = "ssi_clk",
+                .id = 1,
+                .parent = &mpll_main_clk[1],
+                .secondary = &ssi2_clk[1],
+                .get_rate = _clk_ssi2_recalc,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR1,
+                .enable_shift = CCM_PCCR1_SSI2_BAUD_OFFSET,
+                .disable = _clk_disable,
+        }, {
+                .name = "ssi_ipg_clk",
+                .id = 1,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_SSI2_IPG_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk nfc_clk = {
+        .name = "nfc_clk",
+        .parent = &cpu_clk,
+        .get_rate = _clk_nfc_recalc,
+        .enable = _clk_enable,
+        .enable_reg = CCM_PCCR1,
+        .enable_shift = CCM_PCCR1_NFC_BAUD_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk vpu_clk = {
+        .name = "vpu_clk",
+        .parent = &mpll_main_clk[1],
+        .get_rate = _clk_vpu_recalc,
+        .enable = _clk_vpu_enable,
+        .disable = _clk_vpu_disable,
+};
+
+static struct clk dma_clk = {
+        .name = "dma_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_dma_enable,
+        .disable = _clk_dma_disable,
+};
+
+static struct clk rtic_clk = {
+        .name = "rtic_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_rtic_enable,
+        .disable = _clk_rtic_disable,
+};
+
+static struct clk brom_clk = {
+        .name = "brom_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_enable,
+        .enable_reg = CCM_PCCR1,
+        .enable_shift = CCM_PCCR1_HCLK_BROM_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk emma_clk = {
+        .name = "emma_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_emma_enable,
+        .disable = _clk_emma_disable,
+};
+
+static struct clk slcdc_clk = {
+        .name = "slcdc_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_slcdc_enable,
+        .disable = _clk_slcdc_disable,
+};
+
+static struct clk fec_clk = {
+        .name = "fec_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_fec_enable,
+        .disable = _clk_fec_disable,
+};
+
+static struct clk emi_clk = {
+        .name = "emi_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_enable,
+        .enable_reg = CCM_PCCR1,
+        .enable_shift = CCM_PCCR1_HCLK_EMI_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk sahara2_clk = {
+        .name = "sahara_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_sahara2_enable,
+        .disable = _clk_sahara2_disable,
+};
+
+static struct clk ata_clk = {
+        .name = "ata_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_enable,
+        .enable_reg = CCM_PCCR1,
+        .enable_shift = CCM_PCCR1_HCLK_ATA_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk mstick1_clk = {
+        .name = "mstick1_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_mstick1_enable,
+        .disable = _clk_mstick1_disable,
+};
+
+static struct clk wdog_clk = {
+        .name = "wdog_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = CCM_PCCR1,
+        .enable_shift = CCM_PCCR1_WDT_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk gpio_clk = {
+        .name = "gpio_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = CCM_PCCR1,
+        .enable_shift = CCM_PCCR0_GPIO_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk i2c_clk[] = {
+        {
+                .name = "i2c_clk",
+                .id = 0,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_I2C1_OFFSET,
+                .disable = _clk_disable,
+        }, {
+                .name = "i2c_clk",
+                .id = 1,
+                .parent = &ipg_clk,
+                .enable = _clk_enable,
+                .enable_reg = CCM_PCCR0,
+                .enable_shift = CCM_PCCR0_I2C2_OFFSET,
+                .disable = _clk_disable,
+        },
+};
+
+static struct clk iim_clk = {
+        .name = "iim_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = CCM_PCCR0,
+        .enable_shift = CCM_PCCR0_IIM_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk kpp_clk = {
+        .name = "kpp_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = CCM_PCCR0,
+        .enable_shift = CCM_PCCR0_KPP_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk owire_clk = {
+        .name = "owire_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = CCM_PCCR0,
+        .enable_shift = CCM_PCCR0_OWIRE_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk rtc_clk = {
+        .name = "rtc_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = CCM_PCCR0,
+        .enable_shift = CCM_PCCR0_RTC_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk scc_clk = {
+        .name = "scc_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = CCM_PCCR0,
+        .enable_shift = CCM_PCCR0_SCC_OFFSET,
+        .disable = _clk_disable,
+};
+
+static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
+{
+        u32 div;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+        div = parent_rate / rate;
+        if (parent_rate % rate)
+                div++;
+
+        if (div > 8)
+                div = 8;
+
+        return parent_rate / div;
+}
+
+static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
+{
+        u32 reg;
+        u32 div;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        div = parent_rate / rate;
+
+        if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+                return -EINVAL;
+        div--;
+
+        reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKODIV_MASK;
+        reg |= div << CCM_PCDR0_CLKODIV_OFFSET;
+        __raw_writel(reg, CCM_PCDR0);
+
+        return 0;
+}
+
+static unsigned long _clk_clko_recalc(struct clk *clk)
+{
+        u32 div;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_CLKODIV_MASK >>
+                CCM_PCDR0_CLKODIV_OFFSET;
+        div++;
+
+        return parent_rate / div;
+}
+
+static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
+{
+        u32 reg;
+
+        reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
+
+        if (parent == &ckil_clk)
+                reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &ckih_clk)
+                reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == mpll_clk.parent)
+                reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == spll_clk.parent)
+                reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &mpll_clk)
+                reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &spll_clk)
+                reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &cpu_clk)
+                reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &ahb_clk)
+                reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &ipg_clk)
+                reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &per_clk[0])
+                reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &per_clk[1])
+                reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &per_clk[2])
+                reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &per_clk[3])
+                reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &ssi1_clk[0])
+                reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &ssi2_clk[0])
+                reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &nfc_clk)
+                reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &mstick1_clk)
+                reg |= 0x11 << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &vpu_clk)
+                reg |= 0x12 << CCM_CCSR_CLKOSEL_OFFSET;
+        else if (parent == &usb_clk[0])
+                reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
+        else
+                return -EINVAL;
+
+        __raw_writel(reg, CCM_CCSR);
+
+        return 0;
+}
+
+static int _clk_clko_enable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(CCM_PCDR0) | CCM_PCDR0_CLKO_EN;
+        __raw_writel(reg, CCM_PCDR0);
+
+        return 0;
+}
+
+static void _clk_clko_disable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKO_EN;
+        __raw_writel(reg, CCM_PCDR0);
+}
+
+static struct clk clko_clk = {
+        .name = "clko_clk",
+        .get_rate = _clk_clko_recalc,
+        .set_rate = _clk_clko_set_rate,
+        .round_rate = _clk_clko_round_rate,
+        .set_parent = _clk_clko_set_parent,
+        .enable = _clk_clko_enable,
+        .disable = _clk_clko_disable,
+};
+
+static struct clk *mxc_clks[] = {
+        &ckih_clk,
+        &ckil_clk,
+        &mpll_clk,
+        &mpll_main_clk[0],
+        &mpll_main_clk[1],
+        &spll_clk,
+        &cpu_clk,
+        &ahb_clk,
+        &ipg_clk,
+        &per_clk[0],
+        &per_clk[1],
+        &per_clk[2],
+        &per_clk[3],
+        &clko_clk,
+        &uart1_clk[0],
+        &uart1_clk[1],
+        &uart2_clk[0],
+        &uart2_clk[1],
+        &uart3_clk[0],
+        &uart3_clk[1],
+        &uart4_clk[0],
+        &uart4_clk[1],
+        &uart5_clk[0],
+        &uart5_clk[1],
+        &uart6_clk[0],
+        &uart6_clk[1],
+        &gpt1_clk[0],
+        &gpt1_clk[1],
+        &gpt2_clk[0],
+        &gpt2_clk[1],
+        &gpt3_clk[0],
+        &gpt3_clk[1],
+        &gpt4_clk[0],
+        &gpt4_clk[1],
+        &gpt5_clk[0],
+        &gpt5_clk[1],
+        &gpt6_clk[0],
+        &gpt6_clk[1],
+        &pwm_clk[0],
+        &pwm_clk[1],
+        &sdhc1_clk[0],
+        &sdhc1_clk[1],
+        &sdhc2_clk[0],
+        &sdhc2_clk[1],
+        &sdhc3_clk[0],
+        &sdhc3_clk[1],
+        &cspi1_clk[0],
+        &cspi1_clk[1],
+        &cspi2_clk[0],
+        &cspi2_clk[1],
+        &cspi3_clk[0],
+        &cspi3_clk[1],
+        &lcdc_clk[0],
+        &lcdc_clk[1],
+        &lcdc_clk[2],
+        &csi_clk[0],
+        &csi_clk[1],
+        &usb_clk[0],
+        &usb_clk[1],
+        &ssi1_clk[0],
+        &ssi1_clk[1],
+        &ssi2_clk[0],
+        &ssi2_clk[1],
+        &nfc_clk,
+        &vpu_clk,
+        &dma_clk,
+        &rtic_clk,
+        &brom_clk,
+        &emma_clk,
+        &slcdc_clk,
+        &fec_clk,
+        &emi_clk,
+        &sahara2_clk,
+        &ata_clk,
+        &mstick1_clk,
+        &wdog_clk,
+        &gpio_clk,
+        &i2c_clk[0],
+        &i2c_clk[1],
+        &iim_clk,
+        &kpp_clk,
+        &owire_clk,
+        &rtc_clk,
+        &scc_clk,
+};
+
+void __init change_external_low_reference(unsigned long new_ref)
+{
+        external_low_reference = new_ref;
+}
+
+unsigned long __init clk_early_get_timer_rate(void)
+{
+        return clk_get_rate(&per_clk[0]);
+}
+
+static void __init probe_mxc_clocks(void)
+{
+        int i;
+
+        if (mx27_revision() >= CHIP_REV_2_0) {
+                if (CSCR() & 0x8000)
+                        cpu_clk.parent = &mpll_main_clk[0];
+
+                if (!(CSCR() & 0x00800000))
+                        ssi2_clk[0].parent = &spll_clk;
+
+                if (!(CSCR() & 0x00400000))
+                        ssi1_clk[0].parent = &spll_clk;
+
+                if (!(CSCR() & 0x00200000))
+                        vpu_clk.parent = &spll_clk;
+        } else {
+                cpu_clk.parent = &mpll_clk;
+                cpu_clk.set_parent = NULL;
+                cpu_clk.round_rate = NULL;
+                cpu_clk.set_rate = NULL;
+                ahb_clk.parent = &mpll_clk;
+
+                for (i = 0; i < sizeof(per_clk) / sizeof(per_clk[0]); i++)
+                        per_clk[i].parent = &mpll_clk;
+
+                ssi1_clk[0].parent = &mpll_clk;
+                ssi2_clk[0].parent = &mpll_clk;
+
+                vpu_clk.parent = &mpll_clk;
+        }
+}
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mxc_clocks_init(unsigned long fref)
+{
+        u32 cscr;
+        struct clk **clkp;
+
+        external_high_reference = fref;
+
+        /* detect clock reference for both system PLL */
+        cscr = CSCR();
+        if (cscr & CCM_CSCR_MCU)
+                mpll_clk.parent = &ckih_clk;
+        else
+                mpll_clk.parent = &ckil_clk;
+
+        if (cscr & CCM_CSCR_SP)
+                spll_clk.parent = &ckih_clk;
+        else
+                spll_clk.parent = &ckil_clk;
+
+        probe_mxc_clocks();
+
+        per_clk[0].enable(&per_clk[0]);
+        gpt1_clk[1].enable(&gpt1_clk[1]);
+
+        for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
+                clk_register(*clkp);
+
+        /* Turn off all possible clocks */
+        __raw_writel(CCM_PCCR0_GPT1_MASK, CCM_PCCR0);
+        __raw_writel(CCM_PCCR1_PERCLK1_MASK | CCM_PCCR1_HCLK_EMI_MASK,
+                     CCM_PCCR1);
+        spll_clk.disable(&spll_clk);
+
+        /* This will propagate to all children and init all the clock rates */
+
+        clk_enable(&emi_clk);
+        clk_enable(&gpio_clk);
+        clk_enable(&iim_clk);
+        clk_enable(&gpt1_clk[0]);
+#ifdef CONFIG_DEBUG_LL_CONSOLE
+        clk_enable(&uart1_clk[0]);
+#endif
+        return 0;
+}
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
new file mode 100644
index 000000000000..d6b5c2e3377f
--- /dev/null
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/*
+ * i.MX27 specific CPU detection code
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <asm/hardware.h>
+
+#include "crm_regs.h"
+
+static int cpu_silicon_rev = -1;
+static int cpu_partnumber;
+
+static void query_silicon_parameter(void)
+{
+        u32 val;
+        /*
+         * now we have access to the IO registers. As we need
+         * the silicon revision very early we read it here to
+         * avoid any further hooks
+        */
+        val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
+
+        cpu_silicon_rev = (int)(val >> 28);
+        cpu_partnumber = (int)((val >> 12) & 0xFFFF);
+}
+
+/*
+ * Returns:
+ *      the silicon revision of the cpu
+ *      -EINVAL - not a mx27
+ */
+int mx27_revision(void)
+{
+        if (cpu_silicon_rev == -1)
+                query_silicon_parameter();
+
+        if (cpu_partnumber != 0x8821)
+                return -EINVAL;
+
+        return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx27_revision);
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
new file mode 100644
index 000000000000..a40a9b950ce9
--- /dev/null
+++ b/arch/arm/mach-mx2/crm_regs.h
@@ -0,0 +1,273 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
+
+#include <asm/arch/hardware.h>
+
+/* Register offsets */
+#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
+#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
+#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
+#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
+#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
+#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
+#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
+#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
+#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
+#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
+#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
+#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
+#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
+#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+
+#define CCM_CSCR_USB_OFFSET     28
+#define CCM_CSCR_USB_MASK       (0x7 << 28)
+#define CCM_CSCR_SD_OFFSET      24
+#define CCM_CSCR_SD_MASK        (0x3 << 24)
+#define CCM_CSCR_SSI2           (1 << 23)
+#define CCM_CSCR_SSI2_OFFSET    23
+#define CCM_CSCR_SSI1           (1 << 22)
+#define CCM_CSCR_SSI1_OFFSET    22
+#define CCM_CSCR_VPU           (1 << 21)
+#define CCM_CSCR_VPU_OFFSET    21
+#define CCM_CSCR_MSHC           (1 << 20)
+#define CCM_CSCR_SPLLRES        (1 << 19)
+#define CCM_CSCR_MPLLRES        (1 << 18)
+#define CCM_CSCR_SP             (1 << 17)
+#define CCM_CSCR_MCU            (1 << 16)
+/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_ARM_SRC        (1 << 15)
+#define CCM_CSCR_ARM_OFFSET     12
+#define CCM_CSCR_ARM_MASK       (0x3 << 12)
+/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_PRESC_OFFSET   13
+#define CCM_CSCR_PRESC_MASK     (0x7 << 13)
+#define CCM_CSCR_BCLK_OFFSET    9
+#define CCM_CSCR_BCLK_MASK      (0xf << 9)
+#define CCM_CSCR_IPDIV_OFFSET   8
+#define CCM_CSCR_IPDIV          (1 << 8)
+/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_AHB_OFFSET     8
+#define CCM_CSCR_AHB_MASK       (0x3 << 8)
+/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_OSC26MDIV      (1 << 4)
+#define CCM_CSCR_OSC26M         (1 << 3)
+#define CCM_CSCR_FPM            (1 << 2)
+#define CCM_CSCR_SPEN           (1 << 1)
+#define CCM_CSCR_MPEN           1
+
+#define CCM_MPCTL0_CPLM         (1 << 31)
+#define CCM_MPCTL0_PD_OFFSET    26
+#define CCM_MPCTL0_PD_MASK      (0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET   16
+#define CCM_MPCTL0_MFD_MASK     (0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET   10
+#define CCM_MPCTL0_MFI_MASK     (0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET   0
+#define CCM_MPCTL0_MFN_MASK     0x3ff
+
+#define CCM_MPCTL1_LF           (1 << 15)
+#define CCM_MPCTL1_BRMO         (1 << 6)
+
+#define CCM_SPCTL0_CPLM         (1 << 31)
+#define CCM_SPCTL0_PD_OFFSET    26
+#define CCM_SPCTL0_PD_MASK      (0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET   16
+#define CCM_SPCTL0_MFD_MASK     (0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET   10
+#define CCM_SPCTL0_MFI_MASK     (0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET   0
+#define CCM_SPCTL0_MFN_MASK     0x3ff
+
+#define CCM_SPCTL1_LF           (1 << 15)
+#define CCM_SPCTL1_BRMO         (1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET       16
+#define CCM_OSC26MCTL_PEAK_MASK         (0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET        8
+#define CCM_OSC26MCTL_AGC_MASK          (0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET    0
+#define CCM_OSC26MCTL_ANATEST_MASK      0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET    26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK      (0x3f << 26)
+#define CCM_PCDR0_CLKO_EN               25
+#define CCM_PCDR0_CLKODIV_OFFSET        22
+#define CCM_PCDR0_CLKODIV_MASK          (0x7 << 22)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET    16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK      (0x3f << 16)
+/*The difinition for i.MX27 TO2*/
+#define CCM_PCDR0_VPUDIV2_OFFSET        10
+#define CCM_PCDR0_VPUDIV2_MASK          (0x3f << 10)
+#define CCM_PCDR0_NFCDIV2_OFFSET         6
+#define CCM_PCDR0_NFCDIV2_MASK           (0xf << 6)
+#define CCM_PCDR0_MSHCDIV2_MASK          0x3f
+/*The difinition for i.MX27 TO2*/
+#define CCM_PCDR0_NFCDIV_OFFSET         12
+#define CCM_PCDR0_NFCDIV_MASK           (0xf << 12)
+#define CCM_PCDR0_VPUDIV_OFFSET        8
+#define CCM_PCDR0_VPUDIV_MASK          (0xf << 8)
+#define CCM_PCDR0_MSHCDIV_OFFSET        0
+#define CCM_PCDR0_MSHCDIV_MASK          0x1f
+
+#define CCM_PCDR1_PERDIV4_OFFSET        24
+#define CCM_PCDR1_PERDIV4_MASK          (0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET        16
+#define CCM_PCDR1_PERDIV3_MASK          (0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET        8
+#define CCM_PCDR1_PERDIV2_MASK          (0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET        0
+#define CCM_PCDR1_PERDIV1_MASK          0x3f
+
+#define CCM_PCCR0_CSPI1_OFFSET          31
+#define CCM_PCCR0_CSPI1_MASK            (1 << 31)
+#define CCM_PCCR0_CSPI2_OFFSET          30
+#define CCM_PCCR0_CSPI2_MASK            (1 << 30)
+#define CCM_PCCR0_CSPI3_OFFSET          29
+#define CCM_PCCR0_CSPI3_MASK            (1 << 29)
+#define CCM_PCCR0_DMA_OFFSET            28
+#define CCM_PCCR0_DMA_MASK              (1 << 28)
+#define CCM_PCCR0_EMMA_OFFSET           27
+#define CCM_PCCR0_EMMA_MASK             (1 << 27)
+#define CCM_PCCR0_FEC_OFFSET            26
+#define CCM_PCCR0_FEC_MASK              (1 << 26)
+#define CCM_PCCR0_GPIO_OFFSET           25
+#define CCM_PCCR0_GPIO_MASK             (1 << 25)
+#define CCM_PCCR0_GPT1_OFFSET           24
+#define CCM_PCCR0_GPT1_MASK             (1 << 24)
+#define CCM_PCCR0_GPT2_OFFSET           23
+#define CCM_PCCR0_GPT2_MASK             (1 << 23)
+#define CCM_PCCR0_GPT3_OFFSET           22
+#define CCM_PCCR0_GPT3_MASK             (1 << 22)
+#define CCM_PCCR0_GPT4_OFFSET           21
+#define CCM_PCCR0_GPT4_MASK             (1 << 21)
+#define CCM_PCCR0_GPT5_OFFSET           20
+#define CCM_PCCR0_GPT5_MASK             (1 << 20)
+#define CCM_PCCR0_GPT6_OFFSET           19
+#define CCM_PCCR0_GPT6_MASK             (1 << 19)
+#define CCM_PCCR0_I2C1_OFFSET           18
+#define CCM_PCCR0_I2C1_MASK             (1 << 18)
+#define CCM_PCCR0_I2C2_OFFSET           17
+#define CCM_PCCR0_I2C2_MASK             (1 << 17)
+#define CCM_PCCR0_IIM_OFFSET            16
+#define CCM_PCCR0_IIM_MASK              (1 << 16)
+#define CCM_PCCR0_KPP_OFFSET            15
+#define CCM_PCCR0_KPP_MASK              (1 << 15)
+#define CCM_PCCR0_LCDC_OFFSET           14
+#define CCM_PCCR0_LCDC_MASK             (1 << 14)
+#define CCM_PCCR0_MSHC_OFFSET           13
+#define CCM_PCCR0_MSHC_MASK             (1 << 13)
+#define CCM_PCCR0_OWIRE_OFFSET          12
+#define CCM_PCCR0_OWIRE_MASK            (1 << 12)
+#define CCM_PCCR0_PWM_OFFSET            11
+#define CCM_PCCR0_PWM_MASK              (1 << 11)
+#define CCM_PCCR0_RTC_OFFSET            9
+#define CCM_PCCR0_RTC_MASK              (1 << 9)
+#define CCM_PCCR0_RTIC_OFFSET           8
+#define CCM_PCCR0_RTIC_MASK             (1 << 8)
+#define CCM_PCCR0_SAHARA_OFFSET         7
+#define CCM_PCCR0_SAHARA_MASK           (1 << 7)
+#define CCM_PCCR0_SCC_OFFSET            6
+#define CCM_PCCR0_SCC_MASK              (1 << 6)
+#define CCM_PCCR0_SDHC1_OFFSET          5
+#define CCM_PCCR0_SDHC1_MASK            (1 << 5)
+#define CCM_PCCR0_SDHC2_OFFSET          4
+#define CCM_PCCR0_SDHC2_MASK            (1 << 4)
+#define CCM_PCCR0_SDHC3_OFFSET          3
+#define CCM_PCCR0_SDHC3_MASK            (1 << 3)
+#define CCM_PCCR0_SLCDC_OFFSET          2
+#define CCM_PCCR0_SLCDC_MASK            (1 << 2)
+#define CCM_PCCR0_SSI1_IPG_OFFSET       1
+#define CCM_PCCR0_SSI1_IPG_MASK         (1 << 1)
+#define CCM_PCCR0_SSI2_IPG_OFFSET       0
+#define CCM_PCCR0_SSI2_IPG_MASK         (1 << 0)
+
+#define CCM_PCCR1_UART1_OFFSET          31
+#define CCM_PCCR1_UART1_MASK            (1 << 31)
+#define CCM_PCCR1_UART2_OFFSET          30
+#define CCM_PCCR1_UART2_MASK            (1 << 30)
+#define CCM_PCCR1_UART3_OFFSET          29
+#define CCM_PCCR1_UART3_MASK            (1 << 29)
+#define CCM_PCCR1_UART4_OFFSET          28
+#define CCM_PCCR1_UART4_MASK            (1 << 28)
+#define CCM_PCCR1_UART5_OFFSET          27
+#define CCM_PCCR1_UART5_MASK            (1 << 27)
+#define CCM_PCCR1_UART6_OFFSET          26
+#define CCM_PCCR1_UART6_MASK            (1 << 26)
+#define CCM_PCCR1_USBOTG_OFFSET         25
+#define CCM_PCCR1_USBOTG_MASK           (1 << 25)
+#define CCM_PCCR1_WDT_OFFSET            24
+#define CCM_PCCR1_WDT_MASK              (1 << 24)
+#define CCM_PCCR1_HCLK_ATA_OFFSET       23
+#define CCM_PCCR1_HCLK_ATA_MASK         (1 << 23)
+#define CCM_PCCR1_HCLK_BROM_OFFSET      22
+#define CCM_PCCR1_HCLK_BROM_MASK        (1 << 22)
+#define CCM_PCCR1_HCLK_CSI_OFFSET       21
+#define CCM_PCCR1_HCLK_CSI_MASK         (1 << 21)
+#define CCM_PCCR1_HCLK_DMA_OFFSET       20
+#define CCM_PCCR1_HCLK_DMA_MASK         (1 << 20)
+#define CCM_PCCR1_HCLK_EMI_OFFSET       19
+#define CCM_PCCR1_HCLK_EMI_MASK         (1 << 19)
+#define CCM_PCCR1_HCLK_EMMA_OFFSET      18
+#define CCM_PCCR1_HCLK_EMMA_MASK        (1 << 18)
+#define CCM_PCCR1_HCLK_FEC_OFFSET       17
+#define CCM_PCCR1_HCLK_FEC_MASK         (1 << 17)
+#define CCM_PCCR1_HCLK_VPU_OFFSET       16
+#define CCM_PCCR1_HCLK_VPU_MASK         (1 << 16)
+#define CCM_PCCR1_HCLK_LCDC_OFFSET      15
+#define CCM_PCCR1_HCLK_LCDC_MASK        (1 << 15)
+#define CCM_PCCR1_HCLK_RTIC_OFFSET      14
+#define CCM_PCCR1_HCLK_RTIC_MASK        (1 << 14)
+#define CCM_PCCR1_HCLK_SAHARA_OFFSET    13
+#define CCM_PCCR1_HCLK_SAHARA_MASK      (1 << 13)
+#define CCM_PCCR1_HCLK_SLCDC_OFFSET     12
+#define CCM_PCCR1_HCLK_SLCDC_MASK       (1 << 12)
+#define CCM_PCCR1_HCLK_USBOTG_OFFSET    11
+#define CCM_PCCR1_HCLK_USBOTG_MASK      (1 << 11)
+#define CCM_PCCR1_PERCLK1_OFFSET        10
+#define CCM_PCCR1_PERCLK1_MASK          (1 << 10)
+#define CCM_PCCR1_PERCLK2_OFFSET        9
+#define CCM_PCCR1_PERCLK2_MASK          (1 << 9)
+#define CCM_PCCR1_PERCLK3_OFFSET        8
+#define CCM_PCCR1_PERCLK3_MASK          (1 << 8)
+#define CCM_PCCR1_PERCLK4_OFFSET        7
+#define CCM_PCCR1_PERCLK4_MASK          (1 << 7)
+#define CCM_PCCR1_VPU_BAUD_OFFSET       6
+#define CCM_PCCR1_VPU_BAUD_MASK         (1 << 6)
+#define CCM_PCCR1_SSI1_BAUD_OFFSET      5
+#define CCM_PCCR1_SSI1_BAUD_MASK        (1 << 5)
+#define CCM_PCCR1_SSI2_BAUD_OFFSET      4
+#define CCM_PCCR1_SSI2_BAUD_MASK        (1 << 4)
+#define CCM_PCCR1_NFC_BAUD_OFFSET       3
+#define CCM_PCCR1_NFC_BAUD_MASK         (1 << 3)
+#define CCM_PCCR1_MSHC_BAUD_OFFSET      2
+#define CCM_PCCR1_MSHC_BAUD_MASK        (1 << 2)
+
+#define CCM_CCSR_32KSR          (1 << 15)
+#define CCM_CCSR_CLKMODE1       (1 << 9)
+#define CCM_CCSR_CLKMODE0       (1 << 8)
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK   0x1f
+
+#define SYS_FMCR                0x14    /*  Functional Muxing Control Reg */
+#define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
+
+#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
new file mode 100644
index 000000000000..a1f44c3c5315
--- /dev/null
+++ b/arch/arm/mach-mx2/devices.c
@@ -0,0 +1,231 @@
+/*
+ * Author: MontaVista Software, Inc.
+ *       <source@mvista.com>
+ *
+ * Based on the OMAP devices.c
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware.h>
+
+/*
+ * Resource definition for the MXC IrDA
+ */
+static struct resource mxc_irda_resources[] = {
+        [0] = {
+                .start   = UART3_BASE_ADDR,
+                .end     = UART3_BASE_ADDR + SZ_4K - 1,
+                .flags   = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start   = MXC_INT_UART3,
+                .end     = MXC_INT_UART3,
+                .flags   = IORESOURCE_IRQ,
+        },
+};
+
+/* Platform Data for MXC IrDA */
+struct platform_device mxc_irda_device = {
+        .name = "mxc_irda",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(mxc_irda_resources),
+        .resource = mxc_irda_resources,
+};
+
+/*
+ * General Purpose Timer
+ * - i.MX1: 2 timer (slighly different register handling)
+ * - i.MX21: 3 timer
+ * - i.MX27: 6 timer
+ */
+
+/* We use gpt0 as system timer, so do not add a device for this one */
+
+static struct resource timer1_resources[] = {
+        [0] = {
+                .start  = GPT2_BASE_ADDR,
+                .end    = GPT2_BASE_ADDR + 0x17,
+                .flags  = IORESOURCE_MEM
+        },
+        [1] = {
+                .start   = MXC_INT_GPT2,
+                .end     = MXC_INT_GPT2,
+                .flags   = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_gpt1 = {
+        .name = "imx_gpt",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(timer1_resources),
+        .resource = timer1_resources
+};
+
+static struct resource timer2_resources[] = {
+        [0] = {
+                .start  = GPT3_BASE_ADDR,
+                .end    = GPT3_BASE_ADDR + 0x17,
+                .flags  = IORESOURCE_MEM
+        },
+        [1] = {
+                .start   = MXC_INT_GPT3,
+                .end     = MXC_INT_GPT3,
+                .flags   = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_gpt2 = {
+        .name = "imx_gpt",
+        .id = 2,
+        .num_resources = ARRAY_SIZE(timer2_resources),
+        .resource = timer2_resources
+};
+
+#ifdef CONFIG_MACH_MX27
+static struct resource timer3_resources[] = {
+        [0] = {
+                .start  = GPT4_BASE_ADDR,
+                .end    = GPT4_BASE_ADDR + 0x17,
+                .flags  = IORESOURCE_MEM
+        },
+        [1] = {
+                .start   = MXC_INT_GPT4,
+                .end     = MXC_INT_GPT4,
+                .flags   = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_gpt3 = {
+        .name = "imx_gpt",
+        .id = 3,
+        .num_resources = ARRAY_SIZE(timer3_resources),
+        .resource = timer3_resources
+};
+
+static struct resource timer4_resources[] = {
+        [0] = {
+                .start  = GPT5_BASE_ADDR,
+                .end    = GPT5_BASE_ADDR + 0x17,
+                .flags  = IORESOURCE_MEM
+        },
+        [1] = {
+                .start   = MXC_INT_GPT5,
+                .end     = MXC_INT_GPT5,
+                .flags   = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_gpt4 = {
+        .name = "imx_gpt",
+        .id = 4,
+        .num_resources = ARRAY_SIZE(timer4_resources),
+        .resource = timer4_resources
+};
+
+static struct resource timer5_resources[] = {
+        [0] = {
+                .start  = GPT6_BASE_ADDR,
+                .end    = GPT6_BASE_ADDR + 0x17,
+                .flags  = IORESOURCE_MEM
+        },
+        [1] = {
+                .start   = MXC_INT_GPT6,
+                .end     = MXC_INT_GPT6,
+                .flags   = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_gpt5 = {
+        .name = "imx_gpt",
+        .id = 5,
+        .num_resources = ARRAY_SIZE(timer5_resources),
+        .resource = timer5_resources
+};
+#endif
+
+/*
+ * Watchdog:
+ * - i.MX1
+ * - i.MX21
+ * - i.MX27
+ */
+static struct resource mxc_wdt_resources[] = {
+        {
+                .start  = WDOG_BASE_ADDR,
+                .end    = WDOG_BASE_ADDR + 0x30,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device mxc_wdt = {
+        .name = "mxc_wdt",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(mxc_wdt_resources),
+        .resource = mxc_wdt_resources,
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+        [0] = {
+                .chip.label = "gpio-0",
+                .irq = MXC_INT_GPIO,
+                .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0),
+                .virtual_irq_start = MXC_MAX_INT_LINES,
+        },
+        [1] = {
+                .chip.label = "gpio-1",
+                .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1),
+                .virtual_irq_start = MXC_MAX_INT_LINES + 32,
+        },
+        [2] = {
+                .chip.label = "gpio-2",
+                .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2),
+                .virtual_irq_start = MXC_MAX_INT_LINES + 64,
+        },
+        [3] = {
+                .chip.label = "gpio-3",
+                .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3),
+                .virtual_irq_start = MXC_MAX_INT_LINES + 96,
+        },
+        [4] = {
+                .chip.label = "gpio-4",
+                .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4),
+                .virtual_irq_start = MXC_MAX_INT_LINES + 128,
+        },
+        [5] = {
+                .chip.label = "gpio-5",
+                .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5),
+                .virtual_irq_start = MXC_MAX_INT_LINES + 160,
+        }
+};
+
+int __init mxc_register_gpios(void)
+{
+        return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
new file mode 100644
index 000000000000..07875cf00de9
--- /dev/null
+++ b/arch/arm/mach-mx2/generic.c
@@ -0,0 +1,74 @@
+/*
+ * generic.c
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/* MX27 memory map definition */
+static struct map_desc mxc_io_desc[] __initdata = {
+        /*
+         * this fixed mapping covers:
+         * - AIPI1
+         * - AIPI2
+         * - AITC
+         * - ROM Patch
+         * - and some reserved space
+         */
+        {
+                .virtual = AIPI_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(AIPI_BASE_ADDR),
+                .length = AIPI_SIZE,
+                .type = MT_DEVICE
+        },
+        /*
+         * this fixed mapping covers:
+         * - CSI
+         * - ATA
+         */
+        {
+                .virtual = SAHB1_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(SAHB1_BASE_ADDR),
+                .length = SAHB1_SIZE,
+                .type = MT_DEVICE
+        },
+        /*
+         * this fixed mapping covers:
+         * - EMI
+         */
+        {
+                .virtual = X_MEMC_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
+                .length = X_MEMC_SIZE,
+                .type = MT_DEVICE
+        }
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+void __init mxc_map_io(void)
+{
+        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
new file mode 100644
index 000000000000..a9ff01fff137
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -0,0 +1,304 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/arch/common.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/imx-uart.h>
+#include <asm/arch/iomux-mx1-mx2.h>
+#include <asm/arch/board-mx27ads.h>
+
+/* ADS's NOR flash */
+static struct physmap_flash_data mx27ads_flash_data = {
+        .width = 2,
+};
+
+static struct resource mx27ads_flash_resource = {
+        .start = 0xc0000000,
+        .end = 0xc0000000 + 0x02000000 - 1,
+        .flags = IORESOURCE_MEM,
+
+};
+
+static struct platform_device mx27ads_nor_mtd_device = {
+        .name = "physmap-flash",
+        .id = 0,
+        .dev = {
+                .platform_data = &mx27ads_flash_data,
+        },
+        .num_resources = 1,
+        .resource = &mx27ads_flash_resource,
+};
+
+static int mxc_uart0_pins[] = {
+        PE12_PF_UART1_TXD,
+        PE13_PF_UART1_RXD,
+        PE14_PF_UART1_CTS,
+        PE15_PF_UART1_RTS
+};
+
+static int uart_mxc_port0_init(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
+                        ARRAY_SIZE(mxc_uart0_pins),
+                        MXC_GPIO_ALLOC_MODE_NORMAL, "UART0");
+}
+
+static int uart_mxc_port0_exit(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
+                        ARRAY_SIZE(mxc_uart0_pins),
+                        MXC_GPIO_ALLOC_MODE_RELEASE, "UART0");
+}
+
+static int mxc_uart1_pins[] = {
+        PE3_PF_UART2_CTS,
+        PE4_PF_UART2_RTS,
+        PE6_PF_UART2_TXD,
+        PE7_PF_UART2_RXD
+};
+
+static int uart_mxc_port1_init(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+                        ARRAY_SIZE(mxc_uart1_pins),
+                        MXC_GPIO_ALLOC_MODE_NORMAL, "UART1");
+}
+
+static int uart_mxc_port1_exit(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+                        ARRAY_SIZE(mxc_uart1_pins),
+                        MXC_GPIO_ALLOC_MODE_RELEASE, "UART1");
+}
+
+static int mxc_uart2_pins[] = {
+        PE8_PF_UART3_TXD,
+        PE9_PF_UART3_RXD,
+        PE10_PF_UART3_CTS,
+        PE11_PF_UART3_RTS
+};
+
+static int uart_mxc_port2_init(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+                        ARRAY_SIZE(mxc_uart2_pins),
+                        MXC_GPIO_ALLOC_MODE_NORMAL, "UART2");
+}
+
+static int uart_mxc_port2_exit(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+                        ARRAY_SIZE(mxc_uart2_pins),
+                        MXC_GPIO_ALLOC_MODE_RELEASE, "UART2");
+}
+
+static int mxc_uart3_pins[] = {
+        PB26_AF_UART4_RTS,
+        PB28_AF_UART4_TXD,
+        PB29_AF_UART4_CTS,
+        PB31_AF_UART4_RXD
+};
+
+static int uart_mxc_port3_init(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
+                        ARRAY_SIZE(mxc_uart3_pins),
+                        MXC_GPIO_ALLOC_MODE_NORMAL, "UART3");
+}
+
+static int uart_mxc_port3_exit(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
+                        ARRAY_SIZE(mxc_uart3_pins),
+                        MXC_GPIO_ALLOC_MODE_RELEASE, "UART3");
+}
+
+static int mxc_uart4_pins[] = {
+        PB18_AF_UART5_TXD,
+        PB19_AF_UART5_RXD,
+        PB20_AF_UART5_CTS,
+        PB21_AF_UART5_RTS
+};
+
+static int uart_mxc_port4_init(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
+                        ARRAY_SIZE(mxc_uart4_pins),
+                        MXC_GPIO_ALLOC_MODE_NORMAL, "UART4");
+}
+
+static int uart_mxc_port4_exit(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
+                        ARRAY_SIZE(mxc_uart4_pins),
+                        MXC_GPIO_ALLOC_MODE_RELEASE, "UART4");
+}
+
+static int mxc_uart5_pins[] = {
+        PB10_AF_UART6_TXD,
+        PB12_AF_UART6_CTS,
+        PB11_AF_UART6_RXD,
+        PB13_AF_UART6_RTS
+};
+
+static int uart_mxc_port5_init(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
+                        ARRAY_SIZE(mxc_uart5_pins),
+                        MXC_GPIO_ALLOC_MODE_NORMAL, "UART5");
+}
+
+static int uart_mxc_port5_exit(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
+                        ARRAY_SIZE(mxc_uart5_pins),
+                        MXC_GPIO_ALLOC_MODE_RELEASE, "UART5");
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+        &mx27ads_nor_mtd_device,
+};
+
+static int mxc_fec_pins[] = {
+        PD0_AIN_FEC_TXD0,
+        PD1_AIN_FEC_TXD1,
+        PD2_AIN_FEC_TXD2,
+        PD3_AIN_FEC_TXD3,
+        PD4_AOUT_FEC_RX_ER,
+        PD5_AOUT_FEC_RXD1,
+        PD6_AOUT_FEC_RXD2,
+        PD7_AOUT_FEC_RXD3,
+        PD8_AF_FEC_MDIO,
+        PD9_AIN_FEC_MDC,
+        PD10_AOUT_FEC_CRS,
+        PD11_AOUT_FEC_TX_CLK,
+        PD12_AOUT_FEC_RXD0,
+        PD13_AOUT_FEC_RX_DV,
+        PD14_AOUT_FEC_CLR,
+        PD15_AOUT_FEC_COL,
+        PD16_AIN_FEC_TX_ER,
+        PF23_AIN_FEC_TX_EN
+};
+
+static void gpio_fec_active(void)
+{
+        mxc_gpio_setup_multiple_pins(mxc_fec_pins,
+                        ARRAY_SIZE(mxc_fec_pins),
+                        MXC_GPIO_ALLOC_MODE_NORMAL, "FEC");
+}
+
+static void gpio_fec_inactive(void)
+{
+        mxc_gpio_setup_multiple_pins(mxc_fec_pins,
+                        ARRAY_SIZE(mxc_fec_pins),
+                        MXC_GPIO_ALLOC_MODE_RELEASE, "FEC");
+}
+
+static struct imxuart_platform_data uart_pdata[] = {
+        {
+                .init = uart_mxc_port0_init,
+                .exit = uart_mxc_port0_exit,
+                .flags = IMXUART_HAVE_RTSCTS,
+        }, {
+                .init = uart_mxc_port1_init,
+                .exit = uart_mxc_port1_exit,
+                .flags = IMXUART_HAVE_RTSCTS,
+        }, {
+                .init = uart_mxc_port2_init,
+                .exit = uart_mxc_port2_exit,
+                .flags = IMXUART_HAVE_RTSCTS,
+        }, {
+                .init = uart_mxc_port3_init,
+                .exit = uart_mxc_port3_exit,
+                .flags = IMXUART_HAVE_RTSCTS,
+        }, {
+                .init = uart_mxc_port4_init,
+                .exit = uart_mxc_port4_exit,
+                .flags = IMXUART_HAVE_RTSCTS,
+        }, {
+                .init = uart_mxc_port5_init,
+                .exit = uart_mxc_port5_exit,
+                .flags = IMXUART_HAVE_RTSCTS,
+        },
+};
+
+static void __init mx27ads_board_init(void)
+{
+        int i;
+
+        gpio_fec_active();
+
+        for (i = 0; i < 6; i++)
+                imx_init_uart(i, &uart_pdata[i]);
+
+        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27ads_timer_init(void)
+{
+        unsigned long fref = 26000000;
+
+        if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
+                fref = 27000000;
+
+        mxc_clocks_init(fref);
+        mxc_timer_init("gpt_clk.0");
+}
+
+struct sys_timer mx27ads_timer = {
+        .init   = mx27ads_timer_init,
+};
+
+static struct map_desc mx27ads_io_desc[] __initdata = {
+        {
+                .virtual = PBC_BASE_ADDRESS,
+                .pfn = __phys_to_pfn(CS4_BASE_ADDR),
+                .length = SZ_1M,
+                .type = MT_DEVICE,
+        },
+};
+
+void __init mx27ads_map_io(void)
+{
+        mxc_map_io();
+        iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
+}
+
+MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
+        /* maintainer: Freescale Semiconductor, Inc. */
+        .phys_io        = AIPI_BASE_ADDR,
+        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = PHYS_OFFSET + 0x100,
+        .map_io         = mx27ads_map_io,
+        .init_irq       = mxc_init_irq,
+        .init_machine   = mx27ads_board_init,
+        .timer          = &mx27ads_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
new file mode 100644
index 000000000000..a9a28f58e714
--- /dev/null
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/arch/common.h>
+#include <asm/hardware.h>
+#include <asm/arch/iomux-mx1-mx2.h>
+#include <asm/mach/time.h>
+#include <asm/arch/imx-uart.h>
+#include <asm/arch/board-pcm038.h>
+
+/*
+ * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
+ * 16 bit width
+ */
+static struct physmap_flash_data pcm038_flash_data = {
+        .width = 2,
+};
+
+static struct resource pcm038_flash_resource = {
+        .start = 0xc0000000,
+        .end   = 0xc1ffffff,
+        .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm038_nor_mtd_device = {
+        .name = "physmap-flash",
+        .id = 0,
+        .dev = {
+                .platform_data = &pcm038_flash_data,
+        },
+        .num_resources = 1,
+        .resource = &pcm038_flash_resource,
+};
+
+static int mxc_uart0_pins[] = {
+        PE12_PF_UART1_TXD,
+        PE13_PF_UART1_RXD,
+        PE14_PF_UART1_CTS,
+        PE15_PF_UART1_RTS
+};
+
+static int uart_mxc_port0_init(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
+                        ARRAY_SIZE(mxc_uart0_pins),
+                        MXC_GPIO_ALLOC_MODE_NORMAL, "UART0");
+}
+
+static int uart_mxc_port0_exit(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
+                        ARRAY_SIZE(mxc_uart0_pins),
+                        MXC_GPIO_ALLOC_MODE_RELEASE, "UART0");
+}
+
+static int mxc_uart1_pins[] = {
+        PE3_PF_UART2_CTS,
+        PE4_PF_UART2_RTS,
+        PE6_PF_UART2_TXD,
+        PE7_PF_UART2_RXD
+};
+
+static int uart_mxc_port1_init(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+                        ARRAY_SIZE(mxc_uart1_pins),
+                        MXC_GPIO_ALLOC_MODE_NORMAL, "UART1");
+}
+
+static int uart_mxc_port1_exit(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+                        ARRAY_SIZE(mxc_uart1_pins),
+                        MXC_GPIO_ALLOC_MODE_RELEASE, "UART1");
+}
+
+static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS,
+                                PE9_PF_UART3_RXD,
+                                PE10_PF_UART3_CTS,
+                                PE9_PF_UART3_RXD };
+
+static int uart_mxc_port2_init(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+                        ARRAY_SIZE(mxc_uart2_pins),
+                        MXC_GPIO_ALLOC_MODE_NORMAL, "UART2");
+}
+
+static int uart_mxc_port2_exit(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+                        ARRAY_SIZE(mxc_uart2_pins),
+                        MXC_GPIO_ALLOC_MODE_RELEASE, "UART2");
+}
+
+static struct imxuart_platform_data uart_pdata[] = {
+        {
+                .init = uart_mxc_port0_init,
+                .exit = uart_mxc_port0_exit,
+                .flags = IMXUART_HAVE_RTSCTS,
+        }, {
+                .init = uart_mxc_port1_init,
+                .exit = uart_mxc_port1_exit,
+                .flags = IMXUART_HAVE_RTSCTS,
+        }, {
+                .init = uart_mxc_port2_init,
+                .exit = uart_mxc_port2_exit,
+                .flags = IMXUART_HAVE_RTSCTS,
+        },
+};
+
+static int mxc_fec_pins[] = {
+        PD0_AIN_FEC_TXD0,
+        PD1_AIN_FEC_TXD1,
+        PD2_AIN_FEC_TXD2,
+        PD3_AIN_FEC_TXD3,
+        PD4_AOUT_FEC_RX_ER,
+        PD5_AOUT_FEC_RXD1,
+        PD6_AOUT_FEC_RXD2,
+        PD7_AOUT_FEC_RXD3,
+        PD8_AF_FEC_MDIO,
+        PD9_AIN_FEC_MDC,
+        PD10_AOUT_FEC_CRS,
+        PD11_AOUT_FEC_TX_CLK,
+        PD12_AOUT_FEC_RXD0,
+        PD13_AOUT_FEC_RX_DV,
+        PD14_AOUT_FEC_CLR,
+        PD15_AOUT_FEC_COL,
+        PD16_AIN_FEC_TX_ER,
+        PF23_AIN_FEC_TX_EN
+};
+
+static void gpio_fec_active(void)
+{
+        mxc_gpio_setup_multiple_pins(mxc_fec_pins,
+                        ARRAY_SIZE(mxc_fec_pins),
+                        MXC_GPIO_ALLOC_MODE_NORMAL, "FEC");
+}
+
+static void gpio_fec_inactive(void)
+{
+        mxc_gpio_setup_multiple_pins(mxc_fec_pins,
+                        ARRAY_SIZE(mxc_fec_pins),
+                        MXC_GPIO_ALLOC_MODE_RELEASE, "FEC");
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+        &pcm038_nor_mtd_device,
+};
+
+static void __init pcm038_init(void)
+{
+        int i;
+        gpio_fec_active();
+
+        for (i = 0; i < 3; i++)
+                imx_init_uart(i, &uart_pdata[i]);
+
+        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#ifdef CONFIG_MACH_PCM970_BASEBOARD
+        pcm970_baseboard_init();
+#endif
+}
+
+static void __init pcm038_timer_init(void)
+{
+        mxc_clocks_init(26000000);
+        mxc_timer_init("gpt_clk.0");
+}
+
+struct sys_timer pcm038_timer = {
+        .init = pcm038_timer_init,
+};
+
+MACHINE_START(PCM038, "phyCORE-i.MX27")
+        .phys_io        = AIPI_BASE_ADDR,
+        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = PHYS_OFFSET + 0x100,
+        .map_io         = mxc_map_io,
+        .init_irq       = mxc_init_irq,
+        .init_machine   = pcm038_init,
+        .timer          = &pcm038_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
new file mode 100644
index 000000000000..028ac4d33684
--- /dev/null
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+/*
+ * system init for baseboard usage. Will be called by pcm038 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init pcm970_baseboard_init(void)
+{
+}
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
new file mode 100644
index 000000000000..570c02b8e5df
--- /dev/null
+++ b/arch/arm/mach-mx2/serial.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <asm/hardware.h>
+#include <asm/arch/imx-uart.h>
+
+static struct resource uart0[] = {
+        {
+                .start = UART1_BASE_ADDR,
+                .end = UART1_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_UART1,
+                .end = MXC_INT_UART1,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mxc_uart_device0 = {
+        .name = "imx-uart",
+        .id = 0,
+        .resource = uart0,
+        .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+        {
+                .start = UART2_BASE_ADDR,
+                .end = UART2_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_UART2,
+                .end = MXC_INT_UART2,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mxc_uart_device1 = {
+        .name = "imx-uart",
+        .id = 1,
+        .resource = uart1,
+        .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+        {
+                .start = UART3_BASE_ADDR,
+                .end = UART3_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_UART3,
+                .end = MXC_INT_UART3,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mxc_uart_device2 = {
+        .name = "imx-uart",
+        .id = 2,
+        .resource = uart2,
+        .num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+        {
+                .start = UART4_BASE_ADDR,
+                .end = UART4_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_UART4,
+                .end = MXC_INT_UART4,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mxc_uart_device3 = {
+        .name = "imx-uart",
+        .id = 3,
+        .resource = uart3,
+        .num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+        {
+                .start = UART5_BASE_ADDR,
+                .end = UART5_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_UART5,
+                .end = MXC_INT_UART5,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mxc_uart_device4 = {
+        .name = "imx-uart",
+        .id = 4,
+        .resource = uart4,
+        .num_resources = ARRAY_SIZE(uart4),
+};
+
+static struct resource uart5[] = {
+        {
+                .start = UART6_BASE_ADDR,
+                .end = UART6_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_UART6,
+                .end = MXC_INT_UART6,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mxc_uart_device5 = {
+        .name = "imx-uart",
+        .id = 5,
+        .resource = uart5,
+        .num_resources = ARRAY_SIZE(uart5),
+};
+
+/*
+ * Register only those UARTs that physically exists
+ */
+int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
+{
+        switch (uart_no) {
+        case 0:
+                mxc_uart_device0.dev.platform_data = pdata;
+                platform_device_register(&mxc_uart_device0);
+                break;
+        case 1:
+                mxc_uart_device1.dev.platform_data = pdata;
+                platform_device_register(&mxc_uart_device1);
+                break;
+#ifndef CONFIG_MXC_IRDA
+        case 2:
+                mxc_uart_device2.dev.platform_data = pdata;
+                platform_device_register(&mxc_uart_device2);
+                break;
+#endif
+        case 3:
+                mxc_uart_device3.dev.platform_data = pdata;
+                platform_device_register(&mxc_uart_device3);
+                break;
+        case 4:
+                mxc_uart_device4.dev.platform_data = pdata;
+                platform_device_register(&mxc_uart_device4);
+                break;
+        case 5:
+                mxc_uart_device5.dev.platform_data = pdata;
+                platform_device_register(&mxc_uart_device5);
+                break;
+        default:
+                return -ENODEV;
+        }
+
+        return 0;
+}
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
new file mode 100644
index 000000000000..99304645299d
--- /dev/null
+++ b/arch/arm/mach-mx2/system.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/proc-fns.h>
+#include <asm/system.h>
+
+/*
+ * Put the CPU into idle mode. It is called by default_idle()
+ * in process.c file.
+ */
+void arch_idle(void)
+{
+        /*
+         * This should do all the clock switching
+         * and wait for interrupt tricks.
+         */
+        cpu_do_idle();
+}
+
+#define WDOG_WCR_REG                    IO_ADDRESS(WDOG_BASE_ADDR)
+#define WDOG_WCR_SRS                    (1 << 4)
+
+/*
+ * Reset the system. It is called by machine_restart().
+ */
+void arch_reset(char mode)
+{
+        struct clk *clk;
+
+        clk = clk_get(NULL, "wdog_clk");
+        if (!clk) {
+                printk(KERN_ERR"Cannot activate the watchdog. Giving up\n");
+                return;
+        }
+
+        clk_enable(clk);
+
+        /* Assert SRS signal */
+        __raw_writew(__raw_readw(WDOG_WCR_REG) & ~WDOG_WCR_SRS, WDOG_WCR_REG);
+}
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 5fe8606cac08..db9431dee1b4 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -8,5 +8,18 @@ config MACH_MX31ADS
           Include support for MX31ADS platform. This includes specific
           configurations for the board and its peripherals.
 
+config MACH_PCM037
+        bool "Support Phytec pcm037 platforms"
+        help
+          Include support for Phytec pcm037 platform. This includes
+          specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+        bool "Support MX31 LITEKIT (LogicPD)"
+        default n
+        help
+          Include support for MX31 LITEKIT platform. This includes specific
+          configurations for the board and its peripherals.
+
 endmenu
 
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index cbec997f332a..8b21abb71fb0 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -4,5 +4,7 @@
 
 # Object file lists.
 
-obj-y                   := mm.o time.o
+obj-y                   := mm.o clock.o devices.o iomux.o
 obj-$(CONFIG_MACH_MX31ADS)      += mx31ads.o
+obj-$(CONFIG_MACH_MX31LITE)     += mx31lite.o
+obj-$(CONFIG_MACH_PCM037)       += pcm037.o
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
new file mode 100644
index 000000000000..2f3635943e70
--- /dev/null
+++ b/arch/arm/mach-mx3/clock.c
@@ -0,0 +1,1147 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <asm/arch/clock.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+#define PRE_DIV_MIN_FREQ    10000000 /* Minimum Frequency after Predivider */
+
+static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
+{
+        u32 min_pre, temp_pre, old_err, err;
+
+        if (div >= 512) {
+                *pre = 8;
+                *post = 64;
+        } else if (div >= 64) {
+                min_pre = (div - 1) / 64 + 1;
+                old_err = 8;
+                for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
+                        err = div % temp_pre;
+                        if (err == 0) {
+                                *pre = temp_pre;
+                                break;
+                        }
+                        err = temp_pre - err;
+                        if (err < old_err) {
+                                old_err = err;
+                                *pre = temp_pre;
+                        }
+                }
+                *post = (div + *pre - 1) / *pre;
+        } else if (div <= 8) {
+                *pre = div;
+                *post = 1;
+        } else {
+                *pre = 1;
+                *post = div;
+        }
+}
+
+static struct clk mcu_pll_clk;
+static struct clk mcu_main_clk;
+static struct clk usb_pll_clk;
+static struct clk serial_pll_clk;
+static struct clk ipg_clk;
+static struct clk ckih_clk;
+static struct clk ahb_clk;
+
+static int _clk_enable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg |= 3 << clk->enable_shift;
+        __raw_writel(reg, clk->enable_reg);
+
+        return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg &= ~(3 << clk->enable_shift);
+        __raw_writel(reg, clk->enable_reg);
+}
+
+static void _clk_emi_disable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg &= ~(3 << clk->enable_shift);
+        reg |= (1 << clk->enable_shift);
+        __raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+{
+        u32 reg;
+        signed long pd = 1;     /* Pre-divider */
+        signed long mfi;        /* Multiplication Factor (Integer part) */
+        signed long mfn;        /* Multiplication Factor (Integer part) */
+        signed long mfd;        /* Multiplication Factor (Denominator Part) */
+        signed long tmp;
+        u32 ref_freq = clk_get_rate(clk->parent);
+
+        while (((ref_freq / pd) * 10) > rate)
+                pd++;
+
+        if ((ref_freq / pd) < PRE_DIV_MIN_FREQ)
+                return -EINVAL;
+
+        /* the ref_freq/2 in the following is to round up */
+        mfi = (((rate / 2) * pd) + (ref_freq / 2)) / ref_freq;
+        if (mfi < 5 || mfi > 15)
+                return -EINVAL;
+
+        /* pick a mfd value that will work
+         * then solve for mfn */
+        mfd = ref_freq / 50000;
+
+        /*
+         *          pll_freq * pd * mfd
+         *   mfn = --------------------  -  (mfi * mfd)
+         *           2 * ref_freq
+         */
+        /* the tmp/2 is for rounding */
+        tmp = ref_freq / 10000;
+        mfn =
+            ((((((rate / 2) + (tmp / 2)) / tmp) * pd) * mfd) / 10000) -
+            (mfi * mfd);
+
+        mfn = mfn & 0x3ff;
+        pd--;
+        mfd--;
+
+        /* Change the Pll value */
+        reg = (mfi << MXC_CCM_PCTL_MFI_OFFSET) |
+            (mfn << MXC_CCM_PCTL_MFN_OFFSET) |
+            (mfd << MXC_CCM_PCTL_MFD_OFFSET) | (pd << MXC_CCM_PCTL_PD_OFFSET);
+
+        if (clk == &mcu_pll_clk)
+                __raw_writel(reg, MXC_CCM_MPCTL);
+        else if (clk == &usb_pll_clk)
+                __raw_writel(reg, MXC_CCM_UPCTL);
+        else if (clk == &serial_pll_clk)
+                __raw_writel(reg, MXC_CCM_SRPCTL);
+
+        return 0;
+}
+
+static unsigned long _clk_pll_get_rate(struct clk *clk)
+{
+        long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+        unsigned long reg, ccmr;
+        s64 temp;
+        unsigned int prcs;
+
+        ccmr = __raw_readl(MXC_CCM_CCMR);
+        prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
+        if (prcs == 0x1)
+                ref_clk = CKIL_CLK_FREQ * 1024;
+        else
+                ref_clk = clk_get_rate(&ckih_clk);
+
+        if (clk == &mcu_pll_clk) {
+                if ((ccmr & MXC_CCM_CCMR_MPE) == 0)
+                        return ref_clk;
+                if ((ccmr & MXC_CCM_CCMR_MDS) != 0)
+                        return ref_clk;
+                reg = __raw_readl(MXC_CCM_MPCTL);
+        } else if (clk == &usb_pll_clk)
+                reg = __raw_readl(MXC_CCM_UPCTL);
+        else if (clk == &serial_pll_clk)
+                reg = __raw_readl(MXC_CCM_SRPCTL);
+        else {
+                BUG();
+                return 0;
+        }
+
+        pdf = (reg & MXC_CCM_PCTL_PD_MASK) >> MXC_CCM_PCTL_PD_OFFSET;
+        mfd = (reg & MXC_CCM_PCTL_MFD_MASK) >> MXC_CCM_PCTL_MFD_OFFSET;
+        mfi = (reg & MXC_CCM_PCTL_MFI_MASK) >> MXC_CCM_PCTL_MFI_OFFSET;
+        mfi = (mfi <= 5) ? 5 : mfi;
+        mfn = mfn_abs = reg & MXC_CCM_PCTL_MFN_MASK;
+
+        if (mfn >= 0x200) {
+                mfn |= 0xFFFFFE00;
+                mfn_abs = -mfn;
+        }
+
+        ref_clk *= 2;
+        ref_clk /= pdf + 1;
+
+        temp = (u64) ref_clk * mfn_abs;
+        do_div(temp, mfd + 1);
+        if (mfn < 0)
+                temp = -temp;
+        temp = (ref_clk * mfi) + temp;
+
+        return temp;
+}
+
+static int _clk_usb_pll_enable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(MXC_CCM_CCMR);
+        reg |= MXC_CCM_CCMR_UPE;
+        __raw_writel(reg, MXC_CCM_CCMR);
+
+        /* No lock bit on MX31, so using max time from spec */
+        udelay(80);
+
+        return 0;
+}
+
+static void _clk_usb_pll_disable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(MXC_CCM_CCMR);
+        reg &= ~MXC_CCM_CCMR_UPE;
+        __raw_writel(reg, MXC_CCM_CCMR);
+}
+
+static int _clk_serial_pll_enable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(MXC_CCM_CCMR);
+        reg |= MXC_CCM_CCMR_SPE;
+        __raw_writel(reg, MXC_CCM_CCMR);
+
+        /* No lock bit on MX31, so using max time from spec */
+        udelay(80);
+
+        return 0;
+}
+
+static void _clk_serial_pll_disable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(MXC_CCM_CCMR);
+        reg &= ~MXC_CCM_CCMR_SPE;
+        __raw_writel(reg, MXC_CCM_CCMR);
+}
+
+#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
+#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
+#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
+
+static unsigned long _clk_mcu_main_get_rate(struct clk *clk)
+{
+        u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
+
+        if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
+                return clk_get_rate(&serial_pll_clk);
+        else
+                return clk_get_rate(&mcu_pll_clk);
+}
+
+static unsigned long _clk_hclk_get_rate(struct clk *clk)
+{
+        unsigned long max_pdf;
+
+        max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
+                       MXC_CCM_PDR0_MAX_PODF_OFFSET);
+        return clk_get_rate(clk->parent) / (max_pdf + 1);
+}
+
+static unsigned long _clk_ipg_get_rate(struct clk *clk)
+{
+        unsigned long ipg_pdf;
+
+        ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
+                       MXC_CCM_PDR0_IPG_PODF_OFFSET);
+        return clk_get_rate(clk->parent) / (ipg_pdf + 1);
+}
+
+static unsigned long _clk_nfc_get_rate(struct clk *clk)
+{
+        unsigned long nfc_pdf;
+
+        nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
+                       MXC_CCM_PDR0_NFC_PODF_OFFSET);
+        return clk_get_rate(clk->parent) / (nfc_pdf + 1);
+}
+
+static unsigned long _clk_hsp_get_rate(struct clk *clk)
+{
+        unsigned long hsp_pdf;
+
+        hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
+                       MXC_CCM_PDR0_HSP_PODF_OFFSET);
+        return clk_get_rate(clk->parent) / (hsp_pdf + 1);
+}
+
+static unsigned long _clk_usb_get_rate(struct clk *clk)
+{
+        unsigned long usb_pdf, usb_prepdf;
+
+        usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
+                       MXC_CCM_PDR1_USB_PODF_OFFSET);
+        usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
+                          MXC_CCM_PDR1_USB_PRDF_OFFSET);
+        return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
+}
+
+static unsigned long _clk_csi_get_rate(struct clk *clk)
+{
+        u32 reg, pre, post;
+
+        reg = __raw_readl(MXC_CCM_PDR0);
+        pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
+            MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+        pre++;
+        post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
+            MXC_CCM_PDR0_CSI_PODF_OFFSET;
+        post++;
+        return clk_get_rate(clk->parent) / (pre * post);
+}
+
+static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate)
+{
+        u32 pre, post, parent = clk_get_rate(clk->parent);
+        u32 div = parent / rate;
+
+        if (parent % rate)
+                div++;
+
+        __calc_pre_post_dividers(div, &pre, &post);
+
+        return parent / (pre * post);
+}
+
+static int _clk_csi_set_rate(struct clk *clk, unsigned long rate)
+{
+        u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+        div = parent / rate;
+
+        if ((parent / div) != rate)
+                return -EINVAL;
+
+        __calc_pre_post_dividers(div, &pre, &post);
+
+        /* Set CSI clock divider */
+        reg = __raw_readl(MXC_CCM_PDR0) &
+            ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
+        reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
+        reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+        __raw_writel(reg, MXC_CCM_PDR0);
+
+        return 0;
+}
+
+static unsigned long _clk_per_get_rate(struct clk *clk)
+{
+        unsigned long per_pdf;
+
+        per_pdf = PDR0(MXC_CCM_PDR0_PER_PODF_MASK,
+                       MXC_CCM_PDR0_PER_PODF_OFFSET);
+        return clk_get_rate(clk->parent) / (per_pdf + 1);
+}
+
+static unsigned long _clk_ssi1_get_rate(struct clk *clk)
+{
+        unsigned long ssi1_pdf, ssi1_prepdf;
+
+        ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
+                        MXC_CCM_PDR1_SSI1_PODF_OFFSET);
+        ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
+                           MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
+        return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
+}
+
+static unsigned long _clk_ssi2_get_rate(struct clk *clk)
+{
+        unsigned long ssi2_pdf, ssi2_prepdf;
+
+        ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
+                        MXC_CCM_PDR1_SSI2_PODF_OFFSET);
+        ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
+                           MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
+        return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
+}
+
+static unsigned long _clk_firi_get_rate(struct clk *clk)
+{
+        unsigned long firi_pdf, firi_prepdf;
+
+        firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
+                        MXC_CCM_PDR1_FIRI_PODF_OFFSET);
+        firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
+                           MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
+        return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
+}
+
+static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate)
+{
+        u32 pre, post;
+        u32 parent = clk_get_rate(clk->parent);
+        u32 div = parent / rate;
+
+        if (parent % rate)
+                div++;
+
+        __calc_pre_post_dividers(div, &pre, &post);
+
+        return parent / (pre * post);
+
+}
+
+static int _clk_firi_set_rate(struct clk *clk, unsigned long rate)
+{
+        u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+        div = parent / rate;
+
+        if ((parent / div) != rate)
+                return -EINVAL;
+
+        __calc_pre_post_dividers(div, &pre, &post);
+
+        /* Set FIRI clock divider */
+        reg = __raw_readl(MXC_CCM_PDR1) &
+            ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
+        reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
+        reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
+        __raw_writel(reg, MXC_CCM_PDR1);
+
+        return 0;
+}
+
+static unsigned long _clk_mbx_get_rate(struct clk *clk)
+{
+        return clk_get_rate(clk->parent) / 2;
+}
+
+static unsigned long _clk_mstick1_get_rate(struct clk *clk)
+{
+        unsigned long msti_pdf;
+
+        msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
+                        MXC_CCM_PDR2_MST1_PDF_OFFSET);
+        return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long _clk_mstick2_get_rate(struct clk *clk)
+{
+        unsigned long msti_pdf;
+
+        msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
+                        MXC_CCM_PDR2_MST2_PDF_OFFSET);
+        return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+        return ckih_rate;
+}
+
+static struct clk ckih_clk = {
+        .name = "ckih",
+        .get_rate = clk_ckih_get_rate,
+};
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+        return CKIL_CLK_FREQ;
+}
+
+static struct clk ckil_clk = {
+        .name = "ckil",
+        .get_rate = clk_ckil_get_rate,
+};
+
+static struct clk mcu_pll_clk = {
+        .name = "mcu_pll",
+        .parent = &ckih_clk,
+        .set_rate = _clk_pll_set_rate,
+        .get_rate = _clk_pll_get_rate,
+};
+
+static struct clk mcu_main_clk = {
+        .name = "mcu_main_clk",
+        .parent = &mcu_pll_clk,
+        .get_rate = _clk_mcu_main_get_rate,
+};
+
+static struct clk serial_pll_clk = {
+        .name = "serial_pll",
+        .parent = &ckih_clk,
+        .set_rate = _clk_pll_set_rate,
+        .get_rate = _clk_pll_get_rate,
+        .enable = _clk_serial_pll_enable,
+        .disable = _clk_serial_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+        .name = "usb_pll",
+        .parent = &ckih_clk,
+        .set_rate = _clk_pll_set_rate,
+        .get_rate = _clk_pll_get_rate,
+        .enable = _clk_usb_pll_enable,
+        .disable = _clk_usb_pll_disable,
+};
+
+static struct clk ahb_clk = {
+        .name = "ahb_clk",
+        .parent = &mcu_main_clk,
+        .get_rate = _clk_hclk_get_rate,
+};
+
+static struct clk per_clk = {
+        .name = "per_clk",
+        .parent = &usb_pll_clk,
+        .get_rate = _clk_per_get_rate,
+};
+
+static struct clk perclk_clk = {
+        .name = "perclk_clk",
+        .parent = &ipg_clk,
+};
+
+static struct clk cspi_clk[] = {
+        {
+         .name = "cspi_clk",
+         .id = 0,
+         .parent = &ipg_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR2,
+         .enable_shift = MXC_CCM_CGR2_CSPI1_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "cspi_clk",
+         .id = 1,
+         .parent = &ipg_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR2,
+         .enable_shift = MXC_CCM_CGR2_CSPI2_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "cspi_clk",
+         .id = 2,
+         .parent = &ipg_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR0,
+         .enable_shift = MXC_CCM_CGR0_CSPI3_OFFSET,
+         .disable = _clk_disable,},
+};
+
+static struct clk ipg_clk = {
+        .name = "ipg_clk",
+        .parent = &ahb_clk,
+        .get_rate = _clk_ipg_get_rate,
+};
+
+static struct clk emi_clk = {
+        .name = "emi_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR2,
+        .enable_shift = MXC_CCM_CGR2_EMI_OFFSET,
+        .disable = _clk_emi_disable,
+};
+
+static struct clk gpt_clk = {
+        .name = "gpt_clk",
+        .parent = &perclk_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR0,
+        .enable_shift = MXC_CCM_CGR0_GPT_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk pwm_clk = {
+        .name = "pwm_clk",
+        .parent = &perclk_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR0,
+        .enable_shift = MXC_CCM_CGR1_PWM_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk epit_clk[] = {
+        {
+         .name = "epit_clk",
+         .id = 0,
+         .parent = &perclk_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR0,
+         .enable_shift = MXC_CCM_CGR0_EPIT1_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "epit_clk",
+         .id = 1,
+         .parent = &perclk_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR0,
+         .enable_shift = MXC_CCM_CGR0_EPIT2_OFFSET,
+         .disable = _clk_disable,},
+};
+
+static struct clk nfc_clk = {
+        .name = "nfc_clk",
+        .parent = &ahb_clk,
+        .get_rate = _clk_nfc_get_rate,
+};
+
+static struct clk scc_clk = {
+        .name = "scc_clk",
+        .parent = &ipg_clk,
+};
+
+static struct clk ipu_clk = {
+        .name = "ipu_clk",
+        .parent = &mcu_main_clk,
+        .get_rate = _clk_hsp_get_rate,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR1,
+        .enable_shift = MXC_CCM_CGR1_IPU_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk kpp_clk = {
+        .name = "kpp_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR1,
+        .enable_shift = MXC_CCM_CGR1_KPP_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk wdog_clk = {
+        .name = "wdog_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR1,
+        .enable_shift = MXC_CCM_CGR1_WDOG_OFFSET,
+        .disable = _clk_disable,
+};
+static struct clk rtc_clk = {
+        .name = "rtc_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR1,
+        .enable_shift = MXC_CCM_CGR1_RTC_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk usb_clk[] = {
+        {
+         .name = "usb_clk",
+         .parent = &usb_pll_clk,
+         .get_rate = _clk_usb_get_rate,},
+        {
+         .name = "usb_ahb_clk",
+         .parent = &ahb_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR1,
+         .enable_shift = MXC_CCM_CGR1_USBOTG_OFFSET,
+         .disable = _clk_disable,},
+};
+
+static struct clk csi_clk = {
+        .name = "csi_clk",
+        .parent = &serial_pll_clk,
+        .get_rate = _clk_csi_get_rate,
+        .round_rate = _clk_csi_round_rate,
+        .set_rate = _clk_csi_set_rate,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR1,
+        .enable_shift = MXC_CCM_CGR1_CSI_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk uart_clk[] = {
+        {
+         .name = "uart_clk",
+         .id = 0,
+         .parent = &perclk_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR0,
+         .enable_shift = MXC_CCM_CGR0_UART1_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "uart_clk",
+         .id = 1,
+         .parent = &perclk_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR0,
+         .enable_shift = MXC_CCM_CGR0_UART2_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "uart_clk",
+         .id = 2,
+         .parent = &perclk_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR1,
+         .enable_shift = MXC_CCM_CGR1_UART3_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "uart_clk",
+         .id = 3,
+         .parent = &perclk_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR1,
+         .enable_shift = MXC_CCM_CGR1_UART4_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "uart_clk",
+         .id = 4,
+         .parent = &perclk_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR1,
+         .enable_shift = MXC_CCM_CGR1_UART5_OFFSET,
+         .disable = _clk_disable,},
+};
+
+static struct clk i2c_clk[] = {
+        {
+         .name = "i2c_clk",
+         .id = 0,
+         .parent = &perclk_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR0,
+         .enable_shift = MXC_CCM_CGR0_I2C1_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "i2c_clk",
+         .id = 1,
+         .parent = &perclk_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR0,
+         .enable_shift = MXC_CCM_CGR0_I2C2_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "i2c_clk",
+         .id = 2,
+         .parent = &perclk_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR0,
+         .enable_shift = MXC_CCM_CGR0_I2C3_OFFSET,
+         .disable = _clk_disable,},
+};
+
+static struct clk owire_clk = {
+        .name = "owire_clk",
+        .parent = &perclk_clk,
+        .enable_reg = MXC_CCM_CGR1,
+        .enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET,
+        .enable = _clk_enable,
+        .disable = _clk_disable,
+};
+
+static struct clk sdhc_clk[] = {
+        {
+         .name = "sdhc_clk",
+         .id = 0,
+         .parent = &perclk_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR0,
+         .enable_shift = MXC_CCM_CGR0_SD_MMC1_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "sdhc_clk",
+         .id = 1,
+         .parent = &perclk_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR0,
+         .enable_shift = MXC_CCM_CGR0_SD_MMC2_OFFSET,
+         .disable = _clk_disable,},
+};
+
+static struct clk ssi_clk[] = {
+        {
+         .name = "ssi_clk",
+         .parent = &serial_pll_clk,
+         .get_rate = _clk_ssi1_get_rate,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR0,
+         .enable_shift = MXC_CCM_CGR0_SSI1_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "ssi_clk",
+         .id = 1,
+         .parent = &serial_pll_clk,
+         .get_rate = _clk_ssi2_get_rate,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR2,
+         .enable_shift = MXC_CCM_CGR2_SSI2_OFFSET,
+         .disable = _clk_disable,},
+};
+
+static struct clk firi_clk = {
+        .name = "firi_clk",
+        .parent = &usb_pll_clk,
+        .round_rate = _clk_firi_round_rate,
+        .set_rate = _clk_firi_set_rate,
+        .get_rate = _clk_firi_get_rate,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR2,
+        .enable_shift = MXC_CCM_CGR2_FIRI_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk ata_clk = {
+        .name = "ata_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR0,
+        .enable_shift = MXC_CCM_CGR0_ATA_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk mbx_clk = {
+        .name = "mbx_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR2,
+        .enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
+        .get_rate = _clk_mbx_get_rate,
+};
+
+static struct clk vpu_clk = {
+        .name = "vpu_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR2,
+        .enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
+        .get_rate = _clk_mbx_get_rate,
+};
+
+static struct clk rtic_clk = {
+        .name = "rtic_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR2,
+        .enable_shift = MXC_CCM_CGR2_RTIC_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk rng_clk = {
+        .name = "rng_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR0,
+        .enable_shift = MXC_CCM_CGR0_RNG_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk sdma_clk[] = {
+        {
+         .name = "sdma_ahb_clk",
+         .parent = &ahb_clk,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR0,
+         .enable_shift = MXC_CCM_CGR0_SDMA_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "sdma_ipg_clk",
+         .parent = &ipg_clk,}
+};
+
+static struct clk mpeg4_clk = {
+        .name = "mpeg4_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR1,
+        .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk vl2cc_clk = {
+        .name = "vl2cc_clk",
+        .parent = &ahb_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR1,
+        .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
+        .disable = _clk_disable,
+};
+
+static struct clk mstick_clk[] = {
+        {
+         .name = "mstick_clk",
+         .id = 0,
+         .parent = &usb_pll_clk,
+         .get_rate = _clk_mstick1_get_rate,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR1,
+         .enable_shift = MXC_CCM_CGR1_MEMSTICK1_OFFSET,
+         .disable = _clk_disable,},
+        {
+         .name = "mstick_clk",
+         .id = 1,
+         .parent = &usb_pll_clk,
+         .get_rate = _clk_mstick2_get_rate,
+         .enable = _clk_enable,
+         .enable_reg = MXC_CCM_CGR1,
+         .enable_shift = MXC_CCM_CGR1_MEMSTICK2_OFFSET,
+         .disable = _clk_disable,},
+};
+
+static struct clk iim_clk = {
+        .name = "iim_clk",
+        .parent = &ipg_clk,
+        .enable = _clk_enable,
+        .enable_reg = MXC_CCM_CGR0,
+        .enable_shift = MXC_CCM_CGR0_IIM_OFFSET,
+        .disable = _clk_disable,
+};
+
+static unsigned long _clk_cko1_round_rate(struct clk *clk, unsigned long rate)
+{
+        u32 div, parent = clk_get_rate(clk->parent);
+
+        div = parent / rate;
+        if (parent % rate)
+                div++;
+
+        if (div > 8)
+                div = 16;
+        else if (div > 4)
+                div = 8;
+        else if (div > 2)
+                div = 4;
+
+        return parent / div;
+}
+
+static int _clk_cko1_set_rate(struct clk *clk, unsigned long rate)
+{
+        u32 reg, div, parent = clk_get_rate(clk->parent);
+
+        div = parent / rate;
+
+        if (div == 16)
+                div = 4;
+        else if (div == 8)
+                div = 3;
+        else if (div == 4)
+                div = 2;
+        else if (div == 2)
+                div = 1;
+        else if (div == 1)
+                div = 0;
+        else
+                return -EINVAL;
+
+        reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOUTDIV_MASK;
+        reg |= div << MXC_CCM_COSR_CLKOUTDIV_OFFSET;
+        __raw_writel(reg, MXC_CCM_COSR);
+
+        return 0;
+}
+
+static unsigned long _clk_cko1_get_rate(struct clk *clk)
+{
+        u32 div;
+
+        div = __raw_readl(MXC_CCM_COSR) & MXC_CCM_COSR_CLKOUTDIV_MASK >>
+            MXC_CCM_COSR_CLKOUTDIV_OFFSET;
+
+        return clk_get_rate(clk->parent) / (1 << div);
+}
+
+static int _clk_cko1_set_parent(struct clk *clk, struct clk *parent)
+{
+        u32 reg;
+
+        reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOSEL_MASK;
+
+        if (parent == &mcu_main_clk)
+                reg |= 0 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+        else if (parent == &ipg_clk)
+                reg |= 1 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+        else if (parent == &usb_pll_clk)
+                reg |= 2 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+        else if (parent == mcu_main_clk.parent)
+                reg |= 3 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+        else if (parent == &ahb_clk)
+                reg |= 5 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+        else if (parent == &serial_pll_clk)
+                reg |= 7 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+        else if (parent == &ckih_clk)
+                reg |= 8 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+        else if (parent == &emi_clk)
+                reg |= 9 << MXC_CCM_COSR_CLKOSEL_OFFSET;
+        else if (parent == &ipu_clk)
+                reg |= 0xA << MXC_CCM_COSR_CLKOSEL_OFFSET;
+        else if (parent == &nfc_clk)
+                reg |= 0xB << MXC_CCM_COSR_CLKOSEL_OFFSET;
+        else if (parent == &uart_clk[0])
+                reg |= 0xC << MXC_CCM_COSR_CLKOSEL_OFFSET;
+        else
+                return -EINVAL;
+
+        __raw_writel(reg, MXC_CCM_COSR);
+
+        return 0;
+}
+
+static int _clk_cko1_enable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(MXC_CCM_COSR) | MXC_CCM_COSR_CLKOEN;
+        __raw_writel(reg, MXC_CCM_COSR);
+
+        return 0;
+}
+
+static void _clk_cko1_disable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOEN;
+        __raw_writel(reg, MXC_CCM_COSR);
+}
+
+static struct clk cko1_clk = {
+        .name = "cko1_clk",
+        .get_rate = _clk_cko1_get_rate,
+        .set_rate = _clk_cko1_set_rate,
+        .round_rate = _clk_cko1_round_rate,
+        .set_parent = _clk_cko1_set_parent,
+        .enable = _clk_cko1_enable,
+        .disable = _clk_cko1_disable,
+};
+
+static struct clk *mxc_clks[] = {
+        &ckih_clk,
+        &ckil_clk,
+        &mcu_pll_clk,
+        &usb_pll_clk,
+        &serial_pll_clk,
+        &mcu_main_clk,
+        &ahb_clk,
+        &per_clk,
+        &perclk_clk,
+        &cko1_clk,
+        &emi_clk,
+        &cspi_clk[0],
+        &cspi_clk[1],
+        &cspi_clk[2],
+        &ipg_clk,
+        &gpt_clk,
+        &pwm_clk,
+        &wdog_clk,
+        &rtc_clk,
+        &epit_clk[0],
+        &epit_clk[1],
+        &nfc_clk,
+        &ipu_clk,
+        &kpp_clk,
+        &usb_clk[0],
+        &usb_clk[1],
+        &csi_clk,
+        &uart_clk[0],
+        &uart_clk[1],
+        &uart_clk[2],
+        &uart_clk[3],
+        &uart_clk[4],
+        &i2c_clk[0],
+        &i2c_clk[1],
+        &i2c_clk[2],
+        &owire_clk,
+        &sdhc_clk[0],
+        &sdhc_clk[1],
+        &ssi_clk[0],
+        &ssi_clk[1],
+        &firi_clk,
+        &ata_clk,
+        &rtic_clk,
+        &rng_clk,
+        &sdma_clk[0],
+        &sdma_clk[1],
+        &mstick_clk[0],
+        &mstick_clk[1],
+        &scc_clk,
+        &iim_clk,
+};
+
+int __init mxc_clocks_init(unsigned long fref)
+{
+        u32 reg;
+        struct clk **clkp;
+
+        ckih_rate = fref;
+
+        for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
+                clk_register(*clkp);
+
+        if (cpu_is_mx31()) {
+                clk_register(&mpeg4_clk);
+                clk_register(&mbx_clk);
+        } else {
+                clk_register(&vpu_clk);
+                clk_register(&vl2cc_clk);
+        }
+
+        /* Turn off all possible clocks */
+        __raw_writel(MXC_CCM_CGR0_GPT_MASK, MXC_CCM_CGR0);
+        __raw_writel(0, MXC_CCM_CGR1);
+
+        __raw_writel(MXC_CCM_CGR2_EMI_MASK |
+                     MXC_CCM_CGR2_IPMUX1_MASK |
+                     MXC_CCM_CGR2_IPMUX2_MASK |
+                     MXC_CCM_CGR2_MXCCLKENSEL_MASK |    /* for MX32 */
+                     MXC_CCM_CGR2_CHIKCAMPEN_MASK |     /* for MX32 */
+                     MXC_CCM_CGR2_OVRVPUBUSY_MASK |     /* for MX32 */
+                     1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
+                                           MX32, but still required to be set */
+                     MXC_CCM_CGR2);
+
+        clk_disable(&cko1_clk);
+        clk_disable(&usb_pll_clk);
+
+        pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
+
+        clk_enable(&gpt_clk);
+        clk_enable(&emi_clk);
+        clk_enable(&iim_clk);
+
+        clk_enable(&serial_pll_clk);
+
+        if (mx31_revision() >= CHIP_REV_2_0) {
+                reg = __raw_readl(MXC_CCM_PMCR1);
+                /* No PLL restart on DVFS switch; enable auto EMI handshake */
+                reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
+                __raw_writel(reg, MXC_CCM_PMCR1);
+        }
+
+        return 0;
+}
+
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
new file mode 100644
index 000000000000..4a0e0ede23bb
--- /dev/null
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -0,0 +1,401 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX3_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX3_CRM_REGS_H__
+
+#define CKIH_CLK_FREQ           26000000
+#define CKIH_CLK_FREQ_27MHZ     27000000
+#define CKIL_CLK_FREQ           32768
+
+#define MXC_CCM_BASE            IO_ADDRESS(CCM_BASE_ADDR)
+
+/* Register addresses */
+#define MXC_CCM_CCMR            (MXC_CCM_BASE + 0x00)
+#define MXC_CCM_PDR0            (MXC_CCM_BASE + 0x04)
+#define MXC_CCM_PDR1            (MXC_CCM_BASE + 0x08)
+#define MXC_CCM_RCSR            (MXC_CCM_BASE + 0x0C)
+#define MXC_CCM_MPCTL           (MXC_CCM_BASE + 0x10)
+#define MXC_CCM_UPCTL           (MXC_CCM_BASE + 0x14)
+#define MXC_CCM_SRPCTL          (MXC_CCM_BASE + 0x18)
+#define MXC_CCM_COSR            (MXC_CCM_BASE + 0x1C)
+#define MXC_CCM_CGR0            (MXC_CCM_BASE + 0x20)
+#define MXC_CCM_CGR1            (MXC_CCM_BASE + 0x24)
+#define MXC_CCM_CGR2            (MXC_CCM_BASE + 0x28)
+#define MXC_CCM_WIMR            (MXC_CCM_BASE + 0x2C)
+#define MXC_CCM_LDC             (MXC_CCM_BASE + 0x30)
+#define MXC_CCM_DCVR0           (MXC_CCM_BASE + 0x34)
+#define MXC_CCM_DCVR1           (MXC_CCM_BASE + 0x38)
+#define MXC_CCM_DCVR2           (MXC_CCM_BASE + 0x3C)
+#define MXC_CCM_DCVR3           (MXC_CCM_BASE + 0x40)
+#define MXC_CCM_LTR0            (MXC_CCM_BASE + 0x44)
+#define MXC_CCM_LTR1            (MXC_CCM_BASE + 0x48)
+#define MXC_CCM_LTR2            (MXC_CCM_BASE + 0x4C)
+#define MXC_CCM_LTR3            (MXC_CCM_BASE + 0x50)
+#define MXC_CCM_LTBR0           (MXC_CCM_BASE + 0x54)
+#define MXC_CCM_LTBR1           (MXC_CCM_BASE + 0x58)
+#define MXC_CCM_PMCR0           (MXC_CCM_BASE + 0x5C)
+#define MXC_CCM_PMCR1           (MXC_CCM_BASE + 0x60)
+#define MXC_CCM_PDR2            (MXC_CCM_BASE + 0x64)
+
+/* Register bit definitions */
+#define MXC_CCM_CCMR_WBEN                       (1 << 27)
+#define MXC_CCM_CCMR_CSCS                       (1 << 25)
+#define MXC_CCM_CCMR_PERCS                      (1 << 24)
+#define MXC_CCM_CCMR_SSI1S_OFFSET               18
+#define MXC_CCM_CCMR_SSI1S_MASK                 (0x3 << 18)
+#define MXC_CCM_CCMR_SSI2S_OFFSET               21
+#define MXC_CCM_CCMR_SSI2S_MASK                 (0x3 << 21)
+#define MXC_CCM_CCMR_LPM_OFFSET                 14
+#define MXC_CCM_CCMR_LPM_MASK                   (0x3 << 14)
+#define MXC_CCM_CCMR_FIRS_OFFSET                11
+#define MXC_CCM_CCMR_FIRS_MASK                  (0x3 << 11)
+#define MXC_CCM_CCMR_UPE                        (1 << 9)
+#define MXC_CCM_CCMR_SPE                        (1 << 8)
+#define MXC_CCM_CCMR_MDS                        (1 << 7)
+#define MXC_CCM_CCMR_SBYCS                      (1 << 4)
+#define MXC_CCM_CCMR_MPE                        (1 << 3)
+#define MXC_CCM_CCMR_PRCS_OFFSET                1
+#define MXC_CCM_CCMR_PRCS_MASK                  (0x3 << 1)
+
+#define MXC_CCM_PDR0_CSI_PODF_OFFSET            26
+#define MXC_CCM_PDR0_CSI_PODF_MASK              (0x3F << 26)
+#define MXC_CCM_PDR0_CSI_PRDF_OFFSET            23
+#define MXC_CCM_PDR0_CSI_PRDF_MASK              (0x7 << 23)
+#define MXC_CCM_PDR0_PER_PODF_OFFSET            16
+#define MXC_CCM_PDR0_PER_PODF_MASK              (0x1F << 16)
+#define MXC_CCM_PDR0_HSP_PODF_OFFSET            11
+#define MXC_CCM_PDR0_HSP_PODF_MASK              (0x7 << 11)
+#define MXC_CCM_PDR0_NFC_PODF_OFFSET            8
+#define MXC_CCM_PDR0_NFC_PODF_MASK              (0x7 << 8)
+#define MXC_CCM_PDR0_IPG_PODF_OFFSET            6
+#define MXC_CCM_PDR0_IPG_PODF_MASK              (0x3 << 6)
+#define MXC_CCM_PDR0_MAX_PODF_OFFSET            3
+#define MXC_CCM_PDR0_MAX_PODF_MASK              (0x7 << 3)
+#define MXC_CCM_PDR0_MCU_PODF_OFFSET            0
+#define MXC_CCM_PDR0_MCU_PODF_MASK              0x7
+
+#define MXC_CCM_PDR0_HSP_DIV_1                  (0x0 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_2                  (0x1 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_3                  (0x2 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_4                  (0x3 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_5                  (0x4 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_6                  (0x5 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_7                  (0x6 << 11)
+#define MXC_CCM_PDR0_HSP_DIV_8                  (0x7 << 11)
+
+#define MXC_CCM_PDR0_IPG_DIV_1                  (0x0 << 6)
+#define MXC_CCM_PDR0_IPG_DIV_2                  (0x1 << 6)
+#define MXC_CCM_PDR0_IPG_DIV_3                  (0x2 << 6)
+#define MXC_CCM_PDR0_IPG_DIV_4                  (0x3 << 6)
+
+#define MXC_CCM_PDR0_MAX_DIV_1                  (0x0 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_2                  (0x1 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_3                  (0x2 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_4                  (0x3 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_5                  (0x4 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_6                  (0x5 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_7                  (0x6 << 3)
+#define MXC_CCM_PDR0_MAX_DIV_8                  (0x7 << 3)
+
+#define MXC_CCM_PDR0_NFC_DIV_1                  (0x0 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_2                  (0x1 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_3                  (0x2 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_4                  (0x3 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_5                  (0x4 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_6                  (0x5 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_7                  (0x6 << 8)
+#define MXC_CCM_PDR0_NFC_DIV_8                  (0x7 << 8)
+
+#define MXC_CCM_PDR0_MCU_DIV_1                  0x0
+#define MXC_CCM_PDR0_MCU_DIV_2                  0x1
+#define MXC_CCM_PDR0_MCU_DIV_3                  0x2
+#define MXC_CCM_PDR0_MCU_DIV_4                  0x3
+#define MXC_CCM_PDR0_MCU_DIV_5                  0x4
+#define MXC_CCM_PDR0_MCU_DIV_6                  0x5
+#define MXC_CCM_PDR0_MCU_DIV_7                  0x6
+#define MXC_CCM_PDR0_MCU_DIV_8                  0x7
+
+#define MXC_CCM_PDR1_USB_PRDF_OFFSET            30
+#define MXC_CCM_PDR1_USB_PRDF_MASK              (0x3 << 30)
+#define MXC_CCM_PDR1_USB_PODF_OFFSET            27
+#define MXC_CCM_PDR1_USB_PODF_MASK              (0x7 << 27)
+#define MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET       24
+#define MXC_CCM_PDR1_FIRI_PRE_PODF_MASK         (0x7 << 24)
+#define MXC_CCM_PDR1_FIRI_PODF_OFFSET           18
+#define MXC_CCM_PDR1_FIRI_PODF_MASK             (0x3F << 18)
+#define MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET       15
+#define MXC_CCM_PDR1_SSI2_PRE_PODF_MASK         (0x7 << 15)
+#define MXC_CCM_PDR1_SSI2_PODF_OFFSET           9
+#define MXC_CCM_PDR1_SSI2_PODF_MASK             (0x3F << 9)
+#define MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET       6
+#define MXC_CCM_PDR1_SSI1_PRE_PODF_MASK         (0x7 << 6)
+#define MXC_CCM_PDR1_SSI1_PODF_OFFSET           0
+#define MXC_CCM_PDR1_SSI1_PODF_MASK             0x3F
+
+/* Bit definitions for RCSR */
+#define MXC_CCM_RCSR_NF16B                      0x80000000
+
+/* Bit definitions for both MCU, USB and SR PLL control registers */
+#define MXC_CCM_PCTL_BRM                        0x80000000
+#define MXC_CCM_PCTL_PD_OFFSET                  26
+#define MXC_CCM_PCTL_PD_MASK                    (0xF << 26)
+#define MXC_CCM_PCTL_MFD_OFFSET                 16
+#define MXC_CCM_PCTL_MFD_MASK                   (0x3FF << 16)
+#define MXC_CCM_PCTL_MFI_OFFSET                 10
+#define MXC_CCM_PCTL_MFI_MASK                   (0xF << 10)
+#define MXC_CCM_PCTL_MFN_OFFSET                 0
+#define MXC_CCM_PCTL_MFN_MASK                   0x3FF
+
+#define MXC_CCM_CGR0_SD_MMC1_OFFSET             0
+#define MXC_CCM_CGR0_SD_MMC1_MASK               (0x3 << 0)
+#define MXC_CCM_CGR0_SD_MMC2_OFFSET             2
+#define MXC_CCM_CGR0_SD_MMC2_MASK               (0x3 << 2)
+#define MXC_CCM_CGR0_GPT_OFFSET                 4
+#define MXC_CCM_CGR0_GPT_MASK                   (0x3 << 4)
+#define MXC_CCM_CGR0_EPIT1_OFFSET               6
+#define MXC_CCM_CGR0_EPIT1_MASK                 (0x3 << 6)
+#define MXC_CCM_CGR0_EPIT2_OFFSET               8
+#define MXC_CCM_CGR0_EPIT2_MASK                 (0x3 << 8)
+#define MXC_CCM_CGR0_IIM_OFFSET                 10
+#define MXC_CCM_CGR0_IIM_MASK                   (0x3 << 10)
+#define MXC_CCM_CGR0_ATA_OFFSET                 12
+#define MXC_CCM_CGR0_ATA_MASK                   (0x3 << 12)
+#define MXC_CCM_CGR0_SDMA_OFFSET                14
+#define MXC_CCM_CGR0_SDMA_MASK                  (0x3 << 14)
+#define MXC_CCM_CGR0_CSPI3_OFFSET               16
+#define MXC_CCM_CGR0_CSPI3_MASK                 (0x3 << 16)
+#define MXC_CCM_CGR0_RNG_OFFSET                 18
+#define MXC_CCM_CGR0_RNG_MASK                   (0x3 << 18)
+#define MXC_CCM_CGR0_UART1_OFFSET               20
+#define MXC_CCM_CGR0_UART1_MASK                 (0x3 << 20)
+#define MXC_CCM_CGR0_UART2_OFFSET               22
+#define MXC_CCM_CGR0_UART2_MASK                 (0x3 << 22)
+#define MXC_CCM_CGR0_SSI1_OFFSET                24
+#define MXC_CCM_CGR0_SSI1_MASK                  (0x3 << 24)
+#define MXC_CCM_CGR0_I2C1_OFFSET                26
+#define MXC_CCM_CGR0_I2C1_MASK                  (0x3 << 26)
+#define MXC_CCM_CGR0_I2C2_OFFSET                28
+#define MXC_CCM_CGR0_I2C2_MASK                  (0x3 << 28)
+#define MXC_CCM_CGR0_I2C3_OFFSET                30
+#define MXC_CCM_CGR0_I2C3_MASK                  (0x3 << 30)
+
+#define MXC_CCM_CGR1_HANTRO_OFFSET              0
+#define MXC_CCM_CGR1_HANTRO_MASK                (0x3 << 0)
+#define MXC_CCM_CGR1_MEMSTICK1_OFFSET           2
+#define MXC_CCM_CGR1_MEMSTICK1_MASK             (0x3 << 2)
+#define MXC_CCM_CGR1_MEMSTICK2_OFFSET           4
+#define MXC_CCM_CGR1_MEMSTICK2_MASK             (0x3 << 4)
+#define MXC_CCM_CGR1_CSI_OFFSET                 6
+#define MXC_CCM_CGR1_CSI_MASK                   (0x3 << 6)
+#define MXC_CCM_CGR1_RTC_OFFSET                 8
+#define MXC_CCM_CGR1_RTC_MASK                   (0x3 << 8)
+#define MXC_CCM_CGR1_WDOG_OFFSET                10
+#define MXC_CCM_CGR1_WDOG_MASK                  (0x3 << 10)
+#define MXC_CCM_CGR1_PWM_OFFSET                 12
+#define MXC_CCM_CGR1_PWM_MASK                   (0x3 << 12)
+#define MXC_CCM_CGR1_SIM_OFFSET                 14
+#define MXC_CCM_CGR1_SIM_MASK                   (0x3 << 14)
+#define MXC_CCM_CGR1_ECT_OFFSET                 16
+#define MXC_CCM_CGR1_ECT_MASK                   (0x3 << 16)
+#define MXC_CCM_CGR1_USBOTG_OFFSET              18
+#define MXC_CCM_CGR1_USBOTG_MASK                (0x3 << 18)
+#define MXC_CCM_CGR1_KPP_OFFSET                 20
+#define MXC_CCM_CGR1_KPP_MASK                   (0x3 << 20)
+#define MXC_CCM_CGR1_IPU_OFFSET                 22
+#define MXC_CCM_CGR1_IPU_MASK                   (0x3 << 22)
+#define MXC_CCM_CGR1_UART3_OFFSET               24
+#define MXC_CCM_CGR1_UART3_MASK                 (0x3 << 24)
+#define MXC_CCM_CGR1_UART4_OFFSET               26
+#define MXC_CCM_CGR1_UART4_MASK                 (0x3 << 26)
+#define MXC_CCM_CGR1_UART5_OFFSET               28
+#define MXC_CCM_CGR1_UART5_MASK                 (0x3 << 28)
+#define MXC_CCM_CGR1_OWIRE_OFFSET               30
+#define MXC_CCM_CGR1_OWIRE_MASK                 (0x3 << 30)
+
+#define MXC_CCM_CGR2_SSI2_OFFSET                0
+#define MXC_CCM_CGR2_SSI2_MASK                  (0x3 << 0)
+#define MXC_CCM_CGR2_CSPI1_OFFSET               2
+#define MXC_CCM_CGR2_CSPI1_MASK                 (0x3 << 2)
+#define MXC_CCM_CGR2_CSPI2_OFFSET               4
+#define MXC_CCM_CGR2_CSPI2_MASK                 (0x3 << 4)
+#define MXC_CCM_CGR2_GACC_OFFSET                6
+#define MXC_CCM_CGR2_GACC_MASK                  (0x3 << 6)
+#define MXC_CCM_CGR2_EMI_OFFSET                 8
+#define MXC_CCM_CGR2_EMI_MASK                   (0x3 << 8)
+#define MXC_CCM_CGR2_RTIC_OFFSET                10
+#define MXC_CCM_CGR2_RTIC_MASK                  (0x3 << 10)
+#define MXC_CCM_CGR2_FIRI_OFFSET                12
+#define MXC_CCM_CGR2_FIRI_MASK                  (0x3 << 12)
+#define MXC_CCM_CGR2_IPMUX1_OFFSET              14
+#define MXC_CCM_CGR2_IPMUX1_MASK                (0x3 << 14)
+#define MXC_CCM_CGR2_IPMUX2_OFFSET              16
+#define MXC_CCM_CGR2_IPMUX2_MASK                (0x3 << 16)
+
+/* These new CGR2 bits are added in MX32 */
+#define MXC_CCM_CGR2_APMSYSCLKSEL_OFFSET        18
+#define MXC_CCM_CGR2_APMSYSCLKSEL_MASK          (0x3 << 18)
+#define MXC_CCM_CGR2_APMSSICLKSEL_OFFSET        20
+#define MXC_CCM_CGR2_APMSSICLKSEL_MASK          (0x3 << 20)
+#define MXC_CCM_CGR2_APMPERCLKSEL_OFFSET        22
+#define MXC_CCM_CGR2_APMPERCLKSEL_MASK          (0x3 << 22)
+#define MXC_CCM_CGR2_MXCCLKENSEL_OFFSET         24
+#define MXC_CCM_CGR2_MXCCLKENSEL_MASK           (0x1 << 24)
+#define MXC_CCM_CGR2_CHIKCAMPEN_OFFSET          25
+#define MXC_CCM_CGR2_CHIKCAMPEN_MASK            (0x1 << 25)
+#define MXC_CCM_CGR2_OVRVPUBUSY_OFFSET          26
+#define MXC_CCM_CGR2_OVRVPUBUSY_MASK            (0x1 << 26)
+#define MXC_CCM_CGR2_APMENA_OFFSET              30
+#define MXC_CCM_CGR2_AOMENA_MASK                (0x1 << 30)
+
+/*
+ * LTR0 register offsets
+ */
+#define MXC_CCM_LTR0_DIV3CK_OFFSET              1
+#define MXC_CCM_LTR0_DIV3CK_MASK                (0x3 << 1)
+#define MXC_CCM_LTR0_DNTHR_OFFSET               16
+#define MXC_CCM_LTR0_DNTHR_MASK                 (0x3F << 16)
+#define MXC_CCM_LTR0_UPTHR_OFFSET               22
+#define MXC_CCM_LTR0_UPTHR_MASK                 (0x3F << 22)
+
+/*
+ * LTR1 register offsets
+ */
+#define MXC_CCM_LTR1_PNCTHR_OFFSET              0
+#define MXC_CCM_LTR1_PNCTHR_MASK                0x3F
+#define MXC_CCM_LTR1_UPCNT_OFFSET               6
+#define MXC_CCM_LTR1_UPCNT_MASK                 (0xFF << 6)
+#define MXC_CCM_LTR1_DNCNT_OFFSET               14
+#define MXC_CCM_LTR1_DNCNT_MASK                 (0xFF << 14)
+#define MXC_CCM_LTR1_LTBRSR_MASK                0x400000
+#define MXC_CCM_LTR1_LTBRSR_OFFSET              22
+#define MXC_CCM_LTR1_LTBRSR                     0x400000
+#define MXC_CCM_LTR1_LTBRSH                     0x800000
+
+/*
+ * LTR2 bit definitions. x ranges from 0 for WSW9 to 6 for WSW15
+ */
+#define MXC_CCM_LTR2_WSW_OFFSET(x)              (11 + (x) * 3)
+#define MXC_CCM_LTR2_WSW_MASK(x)                (0x7 << \
+                                        MXC_CCM_LTR2_WSW_OFFSET((x)))
+#define MXC_CCM_LTR2_EMAC_OFFSET                0
+#define MXC_CCM_LTR2_EMAC_MASK                  0x1FF
+
+/*
+ * LTR3 bit definitions. x ranges from 0 for WSW0 to 8 for WSW8
+ */
+#define MXC_CCM_LTR3_WSW_OFFSET(x)              (5 + (x) * 3)
+#define MXC_CCM_LTR3_WSW_MASK(x)                (0x7 << \
+                                        MXC_CCM_LTR3_WSW_OFFSET((x)))
+
+#define MXC_CCM_PMCR0_DFSUP1                    0x80000000
+#define MXC_CCM_PMCR0_DFSUP1_SPLL               (0 << 31)
+#define MXC_CCM_PMCR0_DFSUP1_MPLL               (1 << 31)
+#define MXC_CCM_PMCR0_DFSUP0                    0x40000000
+#define MXC_CCM_PMCR0_DFSUP0_PLL                (0 << 30)
+#define MXC_CCM_PMCR0_DFSUP0_PDR                (1 << 30)
+#define MXC_CCM_PMCR0_DFSUP_MASK                (0x3 << 30)
+
+#define DVSUP_TURBO                             0
+#define DVSUP_HIGH                              1
+#define DVSUP_MEDIUM                            2
+#define DVSUP_LOW                               3
+#define MXC_CCM_PMCR0_DVSUP_TURBO               (DVSUP_TURBO << 28)
+#define MXC_CCM_PMCR0_DVSUP_HIGH                (DVSUP_HIGH << 28)
+#define MXC_CCM_PMCR0_DVSUP_MEDIUM              (DVSUP_MEDIUM << 28)
+#define MXC_CCM_PMCR0_DVSUP_LOW                 (DVSUP_LOW << 28)
+#define MXC_CCM_PMCR0_DVSUP_OFFSET              28
+#define MXC_CCM_PMCR0_DVSUP_MASK                (0x3 << 28)
+#define MXC_CCM_PMCR0_UDSC                      0x08000000
+#define MXC_CCM_PMCR0_UDSC_MASK                 (1 << 27)
+#define MXC_CCM_PMCR0_UDSC_UP                   (1 << 27)
+#define MXC_CCM_PMCR0_UDSC_DOWN                 (0 << 27)
+
+#define MXC_CCM_PMCR0_VSCNT_1                   (0x0 << 24)
+#define MXC_CCM_PMCR0_VSCNT_2                   (0x1 << 24)
+#define MXC_CCM_PMCR0_VSCNT_3                   (0x2 << 24)
+#define MXC_CCM_PMCR0_VSCNT_4                   (0x3 << 24)
+#define MXC_CCM_PMCR0_VSCNT_5                   (0x4 << 24)
+#define MXC_CCM_PMCR0_VSCNT_6                   (0x5 << 24)
+#define MXC_CCM_PMCR0_VSCNT_7                   (0x6 << 24)
+#define MXC_CCM_PMCR0_VSCNT_8                   (0x7 << 24)
+#define MXC_CCM_PMCR0_VSCNT_OFFSET              24
+#define MXC_CCM_PMCR0_VSCNT_MASK                (0x7 << 24)
+#define MXC_CCM_PMCR0_DVFEV                     0x00800000
+#define MXC_CCM_PMCR0_DVFIS                     0x00400000
+#define MXC_CCM_PMCR0_LBMI                      0x00200000
+#define MXC_CCM_PMCR0_LBFL                      0x00100000
+#define MXC_CCM_PMCR0_LBCF_4                    (0x0 << 18)
+#define MXC_CCM_PMCR0_LBCF_8                    (0x1 << 18)
+#define MXC_CCM_PMCR0_LBCF_12                   (0x2 << 18)
+#define MXC_CCM_PMCR0_LBCF_16                   (0x3 << 18)
+#define MXC_CCM_PMCR0_LBCF_OFFSET               18
+#define MXC_CCM_PMCR0_LBCF_MASK                 (0x3 << 18)
+#define MXC_CCM_PMCR0_PTVIS                     0x00020000
+#define MXC_CCM_PMCR0_UPDTEN                    0x00010000
+#define MXC_CCM_PMCR0_UPDTEN_MASK               (0x1 << 16)
+#define MXC_CCM_PMCR0_FSVAIM                    0x00008000
+#define MXC_CCM_PMCR0_FSVAI_OFFSET              13
+#define MXC_CCM_PMCR0_FSVAI_MASK                (0x3 << 13)
+#define MXC_CCM_PMCR0_DPVCR                     0x00001000
+#define MXC_CCM_PMCR0_DPVV                      0x00000800
+#define MXC_CCM_PMCR0_WFIM                      0x00000400
+#define MXC_CCM_PMCR0_DRCE3                     0x00000200
+#define MXC_CCM_PMCR0_DRCE2                     0x00000100
+#define MXC_CCM_PMCR0_DRCE1                     0x00000080
+#define MXC_CCM_PMCR0_DRCE0                     0x00000040
+#define MXC_CCM_PMCR0_DCR                       0x00000020
+#define MXC_CCM_PMCR0_DVFEN                     0x00000010
+#define MXC_CCM_PMCR0_PTVAIM                    0x00000008
+#define MXC_CCM_PMCR0_PTVAI_OFFSET              1
+#define MXC_CCM_PMCR0_PTVAI_MASK                (0x3 << 1)
+#define MXC_CCM_PMCR0_DPTEN                     0x00000001
+
+#define MXC_CCM_PMCR1_DVGP_OFFSET               0
+#define MXC_CCM_PMCR1_DVGP_MASK                 (0xF)
+
+#define MXC_CCM_PMCR1_PLLRDIS                      (0x1 << 7)
+#define MXC_CCM_PMCR1_EMIRQ_EN                      (0x1 << 8)
+
+#define MXC_CCM_DCVR_ULV_MASK                   (0x3FF << 22)
+#define MXC_CCM_DCVR_ULV_OFFSET                 22
+#define MXC_CCM_DCVR_LLV_MASK                   (0x3FF << 12)
+#define MXC_CCM_DCVR_LLV_OFFSET                 12
+#define MXC_CCM_DCVR_ELV_MASK                   (0x3FF << 2)
+#define MXC_CCM_DCVR_ELV_OFFSET                 2
+
+#define MXC_CCM_PDR2_MST2_PDF_MASK              (0x3F << 7)
+#define MXC_CCM_PDR2_MST2_PDF_OFFSET            7
+#define MXC_CCM_PDR2_MST1_PDF_MASK              0x3F
+#define MXC_CCM_PDR2_MST1_PDF_OFFSET            0
+
+#define MXC_CCM_COSR_CLKOSEL_MASK               0x0F
+#define MXC_CCM_COSR_CLKOSEL_OFFSET             0
+#define MXC_CCM_COSR_CLKOUTDIV_MASK             (0x07 << 6)
+#define MXC_CCM_COSR_CLKOUTDIV_OFFSET           6
+#define MXC_CCM_COSR_CLKOEN                     (1 << 9)
+
+/*
+ * PMCR0 register offsets
+ */
+#define MXC_CCM_PMCR0_LBFL_OFFSET   20
+#define MXC_CCM_PMCR0_DFSUP0_OFFSET 30
+#define MXC_CCM_PMCR0_DFSUP1_OFFSET 31
+
+#endif                          /* __ARCH_ARM_MACH_MX3_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
new file mode 100644
index 000000000000..5c0320fce5b6
--- /dev/null
+++ b/arch/arm/mach-mx3/devices.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <asm/hardware.h>
+#include <asm/arch/imx-uart.h>
+
+static struct resource uart0[] = {
+        {
+                .start = UART1_BASE_ADDR,
+                .end = UART1_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_UART1,
+                .end = MXC_INT_UART1,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mxc_uart_device0 = {
+        .name = "imx-uart",
+        .id = 0,
+        .resource = uart0,
+        .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+        {
+                .start = UART2_BASE_ADDR,
+                .end = UART2_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_UART2,
+                .end = MXC_INT_UART2,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mxc_uart_device1 = {
+        .name = "imx-uart",
+        .id = 1,
+        .resource = uart1,
+        .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+        {
+                .start = UART3_BASE_ADDR,
+                .end = UART3_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_UART3,
+                .end = MXC_INT_UART3,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mxc_uart_device2 = {
+        .name = "imx-uart",
+        .id = 2,
+        .resource = uart2,
+        .num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+        {
+                .start = UART4_BASE_ADDR,
+                .end = UART4_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_UART4,
+                .end = MXC_INT_UART4,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mxc_uart_device3 = {
+        .name = "imx-uart",
+        .id = 3,
+        .resource = uart3,
+        .num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+        {
+                .start = UART5_BASE_ADDR,
+                .end = UART5_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_UART5,
+                .end = MXC_INT_UART5,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device mxc_uart_device4 = {
+        .name = "imx-uart",
+        .id = 4,
+        .resource = uart4,
+        .num_resources = ARRAY_SIZE(uart4),
+};
+
+/*
+ * Register only those UARTs that physically exist
+ */
+int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
+{
+        switch (uart_no) {
+        case 0:
+                mxc_uart_device0.dev.platform_data = pdata;
+                platform_device_register(&mxc_uart_device0);
+                break;
+        case 1:
+                mxc_uart_device1.dev.platform_data = pdata;
+                platform_device_register(&mxc_uart_device1);
+                break;
+        case 2:
+                mxc_uart_device2.dev.platform_data = pdata;
+                platform_device_register(&mxc_uart_device2);
+                break;
+        case 3:
+                mxc_uart_device3.dev.platform_data = pdata;
+                platform_device_register(&mxc_uart_device3);
+                break;
+        case 4:
+                mxc_uart_device4.dev.platform_data = pdata;
+                platform_device_register(&mxc_uart_device4);
+                break;
+        default:
+                return -ENODEV;
+        }
+
+        return 0;
+}
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+        [0] = {
+                .chip.label = "gpio-0",
+                .base = IO_ADDRESS(GPIO1_BASE_ADDR),
+                .irq = MXC_INT_GPIO1,
+                .virtual_irq_start = MXC_GPIO_INT_BASE
+        },
+        [1] = {
+                .chip.label = "gpio-1",
+                .base = IO_ADDRESS(GPIO2_BASE_ADDR),
+                .irq = MXC_INT_GPIO2,
+                .virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN
+        },
+        [2] = {
+                .chip.label = "gpio-2",
+                .base = IO_ADDRESS(GPIO3_BASE_ADDR),
+                .irq = MXC_INT_GPIO3,
+                .virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN * 2
+        }
+};
+
+int __init mxc_register_gpios(void)
+{
+        return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
new file mode 100644
index 000000000000..adc51feefc1d
--- /dev/null
+++ b/arch/arm/mach-mx3/iomux.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <asm/hardware.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/iomux-mx3.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_BASE      IO_ADDRESS(IOMUXC_BASE_ADDR)
+#define IOMUXINT_OBS1   (IOMUX_BASE + 0x000)
+#define IOMUXINT_OBS2   (IOMUX_BASE + 0x004)
+#define IOMUXGPR        (IOMUX_BASE + 0x008)
+#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C)
+#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(unsigned int pin_mode)
+{
+        u32 reg, field, l, mode, ret = 0;
+
+        reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
+        field = pin_mode & 0x3;
+        mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
+
+        pr_debug("%s: reg offset = 0x%x field = %d mode = 0x%02x\n",
+                        __func__, (pin_mode & IOMUX_REG_MASK), field, mode);
+
+        spin_lock(&gpio_mux_lock);
+
+        l = __raw_readl(reg);
+        l &= ~(0xff << (field * 8));
+        l |= mode << (field * 8);
+        __raw_writel(l, reg);
+
+        spin_unlock(&gpio_mux_lock);
+
+        return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+        u32 reg, field, l;
+
+        reg = IOMUXSW_PAD_CTL + (pin + 2) / 3;
+        field = (pin + 2) % 3;
+
+        pr_debug("%s: reg offset = 0x%x field = %d\n",
+                        __func__, (pin + 2) / 3, field);
+
+        spin_lock(&gpio_mux_lock);
+
+        l = __raw_readl(reg);
+        l &= ~(0x1ff << (field * 9));
+        l |= config << (field * 9);
+        __raw_writel(l, reg);
+
+        spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
+{
+        u32 l;
+
+        spin_lock(&gpio_mux_lock);
+        l = __raw_readl(IOMUXGPR);
+        if (en)
+                l |= gp;
+        else
+                l &= ~gp;
+
+        __raw_writel(l, IOMUXGPR);
+        spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_gpr);
+
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 7e89bdc23a9f..eba3e0cd4283 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -26,9 +26,11 @@
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <asm/arch/common.h>
+#include <asm/arch/board-mx31ads.h>
 
 /*!
  * @file mx31ads.c
@@ -126,6 +128,16 @@ static void __init mxc_board_init(void)
         mxc_init_extuart();
 }
 
+static void __init mx31ads_timer_init(void)
+{
+        mxc_clocks_init(26000000);
+        mxc_timer_init("ipg_clk.0");
+}
+
+struct sys_timer mx31ads_timer = {
+        .init   = mx31ads_timer_init,
+};
+
 /*
  * The following uses standard kernel macros defined in arch.h in order to
  * initialize __mach_desc_MX31ADS data structure.
@@ -138,5 +150,5 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
         .map_io         = mx31ads_map_io,
         .init_irq       = mxc_init_irq,
         .init_machine   = mxc_board_init,
-        .timer          = &mxc_timer,
+        .timer          = &mx31ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
new file mode 100644
index 000000000000..1372c1a1fc3f
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -0,0 +1,107 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/arch/common.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/arch/board-mx31lite.h>
+
+/*
+ * This file contains the board-specific initialization routines.
+ */
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31lite_io_desc[] __initdata = {
+        {
+                .virtual = AIPS1_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
+                .length = AIPS1_SIZE,
+                .type = MT_NONSHARED_DEVICE
+        }, {
+                .virtual = SPBA0_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+                .length = SPBA0_SIZE,
+                .type = MT_NONSHARED_DEVICE
+        }, {
+                .virtual = AIPS2_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
+                .length = AIPS2_SIZE,
+                .type = MT_NONSHARED_DEVICE
+        }, {
+                .virtual = CS4_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(CS4_BASE_ADDR),
+                .length = CS4_SIZE,
+                .type = MT_DEVICE
+        }
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+void __init mx31lite_map_io(void)
+{
+        mxc_map_io();
+        iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
+}
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+}
+
+static void __init mx31lite_timer_init(void)
+{
+        mxc_clocks_init(26000000);
+        mxc_timer_init("ipg_clk.0");
+}
+
+struct sys_timer mx31lite_timer = {
+        .init   = mx31lite_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_MX31LITE data structure.
+ */
+
+MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
+        /* Maintainer: Freescale Semiconductor, Inc. */
+        .phys_io        = AIPS1_BASE_ADDR,
+        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = PHYS_OFFSET + 0x100,
+        .map_io         = mx31lite_map_io,
+        .init_irq       = mxc_init_irq,
+        .init_machine   = mxc_board_init,
+        .timer          = &mx31lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
new file mode 100644
index 000000000000..a34ae6de266f
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -0,0 +1,130 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/memory.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/arch/common.h>
+#include <asm/arch/imx-uart.h>
+#include <asm/arch/iomux-mx3.h>
+#include <asm/arch/board-pcm037.h>
+
+static struct physmap_flash_data pcm037_flash_data = {
+        .width  = 2,
+};
+
+static struct resource pcm037_flash_resource = {
+        .start  = 0xa0000000,
+        .end    = 0xa1ffffff,
+        .flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm037_flash = {
+        .name   = "physmap-flash",
+        .id     = 0,
+        .dev    = {
+                .platform_data  = &pcm037_flash_data,
+        },
+        .resource = &pcm037_flash_resource,
+        .num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+        .flags = 0,
+};
+
+static struct platform_device *devices[] __initdata = {
+        &pcm037_flash,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+
+        mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
+        mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
+        mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
+        mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
+
+        imx_init_uart(0, &uart_pdata);
+
+        mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
+        mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
+
+        imx_init_uart(2, &uart_pdata);
+}
+
+/*
+ * This structure defines static mappings for the pcm037 board.
+ */
+static struct map_desc pcm037_io_desc[] __initdata = {
+        {
+                .virtual        = AIPS1_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(AIPS1_BASE_ADDR),
+                .length         = AIPS1_SIZE,
+                .type           = MT_DEVICE
+        }, {
+                .virtual        = AIPS2_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(AIPS2_BASE_ADDR),
+                .length         = AIPS2_SIZE,
+                .type           = MT_DEVICE
+        },
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+void __init pcm037_map_io(void)
+{
+        mxc_map_io();
+        iotable_init(pcm037_io_desc, ARRAY_SIZE(pcm037_io_desc));
+}
+
+static void __init pcm037_timer_init(void)
+{
+        mxc_clocks_init(26000000);
+        mxc_timer_init("ipg_clk.0");
+}
+
+struct sys_timer pcm037_timer = {
+        .init   = pcm037_timer_init,
+};
+
+MACHINE_START(PCM037, "Phytec Phycore pcm037")
+        /* Maintainer: Pengutronix */
+        .phys_io        = AIPS1_BASE_ADDR,
+        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = PHYS_OFFSET + 0x100,
+        .map_io         = pcm037_map_io,
+        .init_irq       = mxc_init_irq,
+        .init_machine   = mxc_board_init,
+        .timer          = &pcm037_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/time.c b/arch/arm/mach-mx3/time.c
deleted file mode 100644
index fb565c98dbfb..000000000000
--- a/arch/arm/mach-mx3/time.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * System Timer Interrupt reconfigured to run in free-run mode.
- * Author: Vitaly Wool
- * Copyright 2004 MontaVista Software Inc.
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*!
- * @file time.c
- * @brief This file contains OS tick and wdog timer implementations.
- *
- * This file contains OS tick and wdog timer implementations.
- *
- * @ingroup Timers
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/hardware.h>
-#include <asm/mach/time.h>
-#include <asm/io.h>
-#include <asm/arch/common.h>
-
-/*!
- * This is the timer interrupt service routine to do required tasks.
- * It also services the WDOG timer at the frequency of twice per WDOG
- * timeout value. For example, if the WDOG's timeout value is 4 (2
- * seconds since the WDOG runs at 0.5Hz), it will be serviced once
- * every 2/2=1 second.
- *
- * @param  irq          GPT interrupt source number (not used)
- * @param  dev_id       this parameter is not used
- * @return always returns \b IRQ_HANDLED as defined in
- *         include/linux/interrupt.h.
- */
-static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
-{
-        unsigned int next_match;
-
-        if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) {
-                do {
-                        timer_tick();
-                        next_match = __raw_readl(MXC_GPT_GPTOCR1) + LATCH;
-                        __raw_writel(GPTSR_OF1, MXC_GPT_GPTSR);
-                        __raw_writel(next_match, MXC_GPT_GPTOCR1);
-                } while ((signed long)(next_match -
-                                       __raw_readl(MXC_GPT_GPTCNT)) <= 0);
-        }
-
-        return IRQ_HANDLED;
-}
-
-/*!
- * This function is used to obtain the number of microseconds since the last
- * timer interrupt. Note that interrupts is disabled by do_gettimeofday().
- *
- * @return the number of microseconds since the last timer interrupt.
- */
-static unsigned long mxc_gettimeoffset(void)
-{
-        unsigned long ticks_to_match, elapsed, usec, tick_usec, i;
-
-        /* Get ticks before next timer match */
-        ticks_to_match =
-            __raw_readl(MXC_GPT_GPTOCR1) - __raw_readl(MXC_GPT_GPTCNT);
-
-        /* We need elapsed ticks since last match */
-        elapsed = LATCH - ticks_to_match;
-
-        /* Now convert them to usec */
-        /* Insure no overflow when calculating the usec below */
-        for (i = 1, tick_usec = tick_nsec / 1000;; i *= 2) {
-                tick_usec /= i;
-                if ((0xFFFFFFFF / tick_usec) > elapsed)
-                        break;
-        }
-        usec = (unsigned long)(elapsed * tick_usec) / (LATCH / i);
-
-        return usec;
-}
-
-/*!
- * The OS tick timer interrupt structure.
- */
-static struct irqaction timer_irq = {
-        .name = "MXC Timer Tick",
-        .flags = IRQF_DISABLED | IRQF_TIMER,
-        .handler = mxc_timer_interrupt
-};
-
-/*!
- * This function is used to initialize the GPT to produce an interrupt
- * based on HZ.  It is called by start_kernel() during system startup.
- */
-void __init mxc_init_time(void)
-{
-        u32 reg, v;
-        reg = __raw_readl(MXC_GPT_GPTCR);
-        reg &= ~GPTCR_ENABLE;
-        __raw_writel(reg, MXC_GPT_GPTCR);
-        reg |= GPTCR_SWR;
-        __raw_writel(reg, MXC_GPT_GPTCR);
-
-        while ((__raw_readl(MXC_GPT_GPTCR) & GPTCR_SWR) != 0)
-                cpu_relax();
-
-        reg = GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ;
-        __raw_writel(reg, MXC_GPT_GPTCR);
-
-        /* TODO: get timer rate from clk driver */
-        v = 66500000;
-
-        __raw_writel((v / CLOCK_TICK_RATE) - 1, MXC_GPT_GPTPR);
-
-        if ((v % CLOCK_TICK_RATE) != 0) {
-                pr_info("\nWARNING: Can't generate CLOCK_TICK_RATE at %d Hz\n",
-                        CLOCK_TICK_RATE);
-        }
-        pr_info("Actual CLOCK_TICK_RATE is %d Hz\n",
-                v / ((__raw_readl(MXC_GPT_GPTPR) & 0xFFF) + 1));
-
-        reg = __raw_readl(MXC_GPT_GPTCNT);
-        reg += LATCH;
-        __raw_writel(reg, MXC_GPT_GPTOCR1);
-
-        setup_irq(MXC_INT_GPT, &timer_irq);
-
-        reg = __raw_readl(MXC_GPT_GPTCR);
-        reg =
-            GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ | GPTCR_STOPEN | GPTCR_DOZEN |
-            GPTCR_WAITEN | GPTCR_ENMOD | GPTCR_ENABLE;
-        __raw_writel(reg, MXC_GPT_GPTCR);
-
-        __raw_writel(GPTIR_OF1IE, MXC_GPT_GPTIR);
-}
-
-struct sys_timer mxc_timer = {
-        .init = mxc_init_time,
-        .offset = mxc_gettimeoffset,
-};
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index c06f5254c0f3..1bda8f5d7546 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,9 @@
 #
 
 # Common support
-obj-y := io.o id.o clock.o irq.o mux.o serial.o devices.o
+obj-y := io.o id.o sram.o clock.o irq.o mux.o serial.o devices.o
+
+obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 obj-$(CONFIG_OMAP_MPU_TIMER)    += time.o
 obj-$(CONFIG_OMAP_32K_TIMER)    += timer32k.o
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index bcb984f2300f..3f39e0e79c9f 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/clk.h>
@@ -202,7 +203,7 @@ static struct omap_board_config_kernel nokia770_config[] __initdata = {
 #define AMPLIFIER_CTRL_GPIO     58
 
 static struct clk *dspxor_ck;
-static DECLARE_MUTEX(audio_pwr_sem);
+static DEFINE_MUTEX(audio_pwr_lock);
 /*
  * audio_pwr_state
  * +--+-------------------------+---------------------------------------+
@@ -218,7 +219,7 @@ static DECLARE_MUTEX(audio_pwr_sem);
 static int audio_pwr_state = -1;
 
 /*
- * audio_pwr_up / down should be called under audio_pwr_sem
+ * audio_pwr_up / down should be called under audio_pwr_lock
  */
 static void nokia770_audio_pwr_up(void)
 {
@@ -237,11 +238,11 @@ static void nokia770_audio_pwr_up(void)
 
 static void codec_delayed_power_down(struct work_struct *work)
 {
-        down(&audio_pwr_sem);
+        mutex_lock(&audio_pwr_lock);
         if (audio_pwr_state == -1)
                 aic23_power_down();
         clk_disable(dspxor_ck);
-        up(&audio_pwr_sem);
+        mutex_unlock(&audio_pwr_lock);
 }
 
 static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down);
@@ -258,19 +259,19 @@ static void nokia770_audio_pwr_down(void)
 static int
 nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage)
 {
-        down(&audio_pwr_sem);
+        mutex_lock(&audio_pwr_lock);
         if (audio_pwr_state == -1)
                 nokia770_audio_pwr_up();
         /* force audio_pwr_state = 0, even if it was 1. */
         audio_pwr_state = 0;
-        up(&audio_pwr_sem);
+        mutex_unlock(&audio_pwr_lock);
         return 0;
 }
 
 static int
 nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
 {
-        down(&audio_pwr_sem);
+        mutex_lock(&audio_pwr_lock);
         switch (stage) {
         case 1:
                 if (audio_pwr_state == 0)
@@ -283,7 +284,7 @@ nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
                 }
                 break;
         }
-        up(&audio_pwr_sem);
+        mutex_unlock(&audio_pwr_lock);
         return 0;
 }
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a66505f58b15..845c66371ca3 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -267,13 +267,17 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 
 static void __init osk_init_smc91x(void)
 {
+        u32 l;
+
         if ((gpio_request(0, "smc_irq")) < 0) {
                 printk("Error requesting gpio 0 for smc91x irq\n");
                 return;
         }
 
         /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
-        EMIFS_CCS(1) |= 0x3;
+        l = omap_readl(EMIFS_CCS(1));
+        l |= 0x3;
+        omap_writel(l, EMIFS_CCS(1));
 }
 
 static void __init osk_init_cf(void)
@@ -526,20 +530,26 @@ static void __init osk_mistral_init(void) { }
 
 static void __init osk_init(void)
 {
+        u32 l;
+
         /* Workaround for wrong CS3 (NOR flash) timing
          * There are some U-Boot versions out there which configure
          * wrong CS3 memory timings. This mainly leads to CRC
          * or similar errors if you use NOR flash (e.g. with JFFS2)
          */
-        if (EMIFS_CCS(3) != EMIFS_CS3_VAL)
-                EMIFS_CCS(3) = EMIFS_CS3_VAL;
+        l = omap_readl(EMIFS_CCS(3));
+        if (l != EMIFS_CS3_VAL)
+                omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
 
         osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
         osk_flash_resource.end += SZ_32M - 1;
         platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
         omap_board_config = osk_config;
         omap_board_config_size = ARRAY_SIZE(osk_config);
-        USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
+
+        l = omap_readl(USB_TRANSCEIVER_CTRL);
+        l |= (3 << 1);
+        omap_writel(l, USB_TRANSCEIVER_CTRL);
 
         /* irq for tps65010 chip */
         /* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 30e188109046..0cf62ef5ecb7 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -32,7 +32,7 @@
 
 static void fpga_mask_irq(unsigned int irq)
 {
-        irq -= OMAP1510_IH_FPGA_BASE;
+        irq -= OMAP_FPGA_IRQ_BASE;
 
         if (irq < 8)
                 __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO)
@@ -65,7 +65,7 @@ static void fpga_ack_irq(unsigned int irq)
 
 static void fpga_unmask_irq(unsigned int irq)
 {
-        irq -= OMAP1510_IH_FPGA_BASE;
+        irq -= OMAP_FPGA_IRQ_BASE;
 
         if (irq < 8)
                 __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)),
@@ -95,8 +95,8 @@ void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
         if (!stat)
                 return;
 
-        for (fpga_irq = OMAP1510_IH_FPGA_BASE;
-             (fpga_irq < (OMAP1510_IH_FPGA_BASE + NR_FPGA_IRQS)) && stat;
+        for (fpga_irq = OMAP_FPGA_IRQ_BASE;
+             (fpga_irq < OMAP_FPGA_IRQ_END) && stat;
              fpga_irq++, stat >>= 1) {
                 if (stat & 1) {
                         d = irq_desc + fpga_irq;
@@ -151,7 +151,7 @@ void omap1510_fpga_init_irq(void)
         __raw_writeb(0, OMAP1510_FPGA_IMR_HI);
         __raw_writeb(0, INNOVATOR_FPGA_IMR2);
 
-        for (i = OMAP1510_IH_FPGA_BASE; i < (OMAP1510_IH_FPGA_BASE + NR_FPGA_IRQS); i++) {
+        for (i = OMAP_FPGA_IRQ_BASE; i < OMAP_FPGA_IRQ_END; i++) {
 
                 if (i == OMAP1510_INT_FPGA_TS) {
                         /*
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
new file mode 100644
index 000000000000..2d2c2522b048
--- /dev/null
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -0,0 +1,280 @@
+/*
+ * linux/arch/arm/mach-omap1/mcbsp.c
+ *
+ * Copyright (C) 2008 Instituto Nokia de Tecnologia
+ * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Multichannel mode not supported.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/dsp_common.h>
+
+#define DPS_RSTCT2_PER_EN       (1 << 0)
+#define DSP_RSTCT2_WD_PER_EN    (1 << 1)
+
+struct mcbsp_internal_clk {
+        struct clk clk;
+        struct clk **childs;
+        int n_childs;
+};
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
+static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
+{
+        const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
+        int i;
+
+        mclk->n_childs = ARRAY_SIZE(clk_names);
+        mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
+                                GFP_KERNEL);
+
+        for (i = 0; i < mclk->n_childs; i++) {
+                /* We fake a platform device to get correct device id */
+                struct platform_device pdev;
+
+                pdev.dev.bus = &platform_bus_type;
+                pdev.id = mclk->clk.id;
+                mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
+                if (IS_ERR(mclk->childs[i]))
+                        printk(KERN_ERR "Could not get clock %s (%d).\n",
+                                clk_names[i], mclk->clk.id);
+        }
+}
+
+static int omap_mcbsp_clk_enable(struct clk *clk)
+{
+        struct mcbsp_internal_clk *mclk = container_of(clk,
+                                        struct mcbsp_internal_clk, clk);
+        int i;
+
+        for (i = 0; i < mclk->n_childs; i++)
+                clk_enable(mclk->childs[i]);
+        return 0;
+}
+
+static void omap_mcbsp_clk_disable(struct clk *clk)
+{
+        struct mcbsp_internal_clk *mclk = container_of(clk,
+                                        struct mcbsp_internal_clk, clk);
+        int i;
+
+        for (i = 0; i < mclk->n_childs; i++)
+                clk_disable(mclk->childs[i]);
+}
+
+static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
+        {
+                .clk = {
+                        .name           = "mcbsp_clk",
+                        .id             = 1,
+                        .enable         = omap_mcbsp_clk_enable,
+                        .disable        = omap_mcbsp_clk_disable,
+                },
+        },
+        {
+                .clk = {
+                        .name           = "mcbsp_clk",
+                        .id             = 3,
+                        .enable         = omap_mcbsp_clk_enable,
+                        .disable        = omap_mcbsp_clk_disable,
+                },
+        },
+};
+
+#define omap_mcbsp_clks_size    ARRAY_SIZE(omap_mcbsp_clks)
+#else
+#define omap_mcbsp_clks_size    0
+static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
+static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
+{ }
+#endif
+
+static int omap1_mcbsp_check(unsigned int id)
+{
+        /* REVISIT: Check correctly for number of registered McBSPs */
+        if (cpu_is_omap730()) {
+                if (id > OMAP_MAX_MCBSP_COUNT - 2) {
+                       printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
+                                id + 1);
+                       return -ENODEV;
+                }
+                return 0;
+        }
+
+        if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
+                if (id > OMAP_MAX_MCBSP_COUNT - 1) {
+                        printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
+                                id + 1);
+                        return -ENODEV;
+                }
+                return 0;
+        }
+
+        return -ENODEV;
+}
+
+static void omap1_mcbsp_request(unsigned int id)
+{
+        /*
+         * On 1510, 1610 and 1710, McBSP1 and McBSP3
+         * are DSP public peripherals.
+         */
+        if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+                omap_dsp_request_mem();
+                /*
+                 * DSP external peripheral reset
+                 * FIXME: This should be moved to dsp code
+                 */
+                __raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
+                                DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
+        }
+}
+
+static void omap1_mcbsp_free(unsigned int id)
+{
+        if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
+                omap_dsp_release_mem();
+}
+
+static struct omap_mcbsp_ops omap1_mcbsp_ops = {
+        .check          = omap1_mcbsp_check,
+        .request        = omap1_mcbsp_request,
+        .free           = omap1_mcbsp_free,
+};
+
+#ifdef CONFIG_ARCH_OMAP730
+static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
+        {
+                .virt_base      = io_p2v(OMAP730_MCBSP1_BASE),
+                .dma_rx_sync    = OMAP_DMA_MCBSP1_RX,
+                .dma_tx_sync    = OMAP_DMA_MCBSP1_TX,
+                .rx_irq         = INT_730_McBSP1RX,
+                .tx_irq         = INT_730_McBSP1TX,
+                .ops            = &omap1_mcbsp_ops,
+        },
+        {
+                .virt_base      = io_p2v(OMAP730_MCBSP2_BASE),
+                .dma_rx_sync    = OMAP_DMA_MCBSP3_RX,
+                .dma_tx_sync    = OMAP_DMA_MCBSP3_TX,
+                .rx_irq         = INT_730_McBSP2RX,
+                .tx_irq         = INT_730_McBSP2TX,
+                .ops            = &omap1_mcbsp_ops,
+        },
+};
+#define OMAP730_MCBSP_PDATA_SZ          ARRAY_SIZE(omap730_mcbsp_pdata)
+#else
+#define omap730_mcbsp_pdata             NULL
+#define OMAP730_MCBSP_PDATA_SZ          0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
+        {
+                .virt_base      = OMAP1510_MCBSP1_BASE,
+                .dma_rx_sync    = OMAP_DMA_MCBSP1_RX,
+                .dma_tx_sync    = OMAP_DMA_MCBSP1_TX,
+                .rx_irq         = INT_McBSP1RX,
+                .tx_irq         = INT_McBSP1TX,
+                .ops            = &omap1_mcbsp_ops,
+                .clk_name       = "mcbsp_clk",
+                },
+        {
+                .virt_base      = io_p2v(OMAP1510_MCBSP2_BASE),
+                .dma_rx_sync    = OMAP_DMA_MCBSP2_RX,
+                .dma_tx_sync    = OMAP_DMA_MCBSP2_TX,
+                .rx_irq         = INT_1510_SPI_RX,
+                .tx_irq         = INT_1510_SPI_TX,
+                .ops            = &omap1_mcbsp_ops,
+        },
+        {
+                .virt_base      = OMAP1510_MCBSP3_BASE,
+                .dma_rx_sync    = OMAP_DMA_MCBSP3_RX,
+                .dma_tx_sync    = OMAP_DMA_MCBSP3_TX,
+                .rx_irq         = INT_McBSP3RX,
+                .tx_irq         = INT_McBSP3TX,
+                .ops            = &omap1_mcbsp_ops,
+                .clk_name       = "mcbsp_clk",
+        },
+};
+#define OMAP15XX_MCBSP_PDATA_SZ         ARRAY_SIZE(omap15xx_mcbsp_pdata)
+#else
+#define omap15xx_mcbsp_pdata            NULL
+#define OMAP15XX_MCBSP_PDATA_SZ         0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
+        {
+                .virt_base      = OMAP1610_MCBSP1_BASE,
+                .dma_rx_sync    = OMAP_DMA_MCBSP1_RX,
+                .dma_tx_sync    = OMAP_DMA_MCBSP1_TX,
+                .rx_irq         = INT_McBSP1RX,
+                .tx_irq         = INT_McBSP1TX,
+                .ops            = &omap1_mcbsp_ops,
+                .clk_name       = "mcbsp_clk",
+        },
+        {
+                .virt_base      = io_p2v(OMAP1610_MCBSP2_BASE),
+                .dma_rx_sync    = OMAP_DMA_MCBSP2_RX,
+                .dma_tx_sync    = OMAP_DMA_MCBSP2_TX,
+                .rx_irq         = INT_1610_McBSP2_RX,
+                .tx_irq         = INT_1610_McBSP2_TX,
+                .ops            = &omap1_mcbsp_ops,
+        },
+        {
+                .virt_base      = OMAP1610_MCBSP3_BASE,
+                .dma_rx_sync    = OMAP_DMA_MCBSP3_RX,
+                .dma_tx_sync    = OMAP_DMA_MCBSP3_TX,
+                .rx_irq         = INT_McBSP3RX,
+                .tx_irq         = INT_McBSP3TX,
+                .ops            = &omap1_mcbsp_ops,
+                .clk_name       = "mcbsp_clk",
+        },
+};
+#define OMAP16XX_MCBSP_PDATA_SZ         ARRAY_SIZE(omap16xx_mcbsp_pdata)
+#else
+#define omap16xx_mcbsp_pdata            NULL
+#define OMAP16XX_MCBSP_PDATA_SZ         0
+#endif
+
+int __init omap1_mcbsp_init(void)
+{
+        int i;
+
+        for (i = 0; i < omap_mcbsp_clks_size; i++) {
+                if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
+                        omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
+                        clk_register(&omap_mcbsp_clks[i].clk);
+                }
+        }
+
+        if (cpu_is_omap730())
+                omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
+                                                OMAP730_MCBSP_PDATA_SZ);
+
+        if (cpu_is_omap15xx())
+                omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata,
+                                                OMAP15XX_MCBSP_PDATA_SZ);
+
+        if (cpu_is_omap16xx())
+                omap_mcbsp_register_board_cfg(omap16xx_mcbsp_pdata,
+                                                OMAP16XX_MCBSP_PDATA_SZ);
+
+        return omap_mcbsp_init();
+}
+
+arch_initcall(omap1_mcbsp_init);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index e6c64e10b7ec..742f79e73bd7 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -116,13 +116,6 @@ void omap_pm_idle(void)
                 return;
         }
 
-        /*
-         * Since an interrupt may set up a timer, we don't want to
-         * reprogram the hardware timer with interrupts enabled.
-         * Re-enable interrupts only after returning from idle.
-         */
-        timer_dyn_reprogram();
-
 #ifdef CONFIG_OMAP_MPU_TIMER
 #warning Enable 32kHz OS timer in order to allow sleep states in idle
         use_idlect1 = use_idlect1 & ~(1 << 9);
diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/mach-omap1/sram.S
index 9e1813c77e05..126d252062d7 100644
--- a/arch/arm/plat-omap/sram-fn.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -18,7 +18,7 @@
 /*
  * Reprograms ULPD and CKCTL.
  */
-ENTRY(sram_reprogram_clock)
+ENTRY(omap1_sram_reprogram_clock)
         stmfd   sp!, {r0 - r12, lr}             @ save registers on stack
 
         mov     r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
@@ -53,5 +53,5 @@ lock:	ldrh	r4, [r2], #0			@ read back dpll value
 
 out:
         ldmfd   sp!, {r0 - r12, pc}             @ restore regs and return
-ENTRY(sram_reprogram_clock_sz)
-        .word   . - sram_reprogram_clock
+ENTRY(omap1_sram_reprogram_clock_sz)
+        .word   . - omap1_sram_reprogram_clock
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 2feb6870b735..93ee990618ef 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,9 +3,15 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sram-fn.o memory.o control.o prcm.o clock.o mux.o \
+obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
                 devices.o serial.o gpmc.o timer-gp.o
 
+obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+
+# Functions loaded to SRAM
+obj-$(CONFIG_ARCH_OMAP2420)             += sram242x.o
+obj-$(CONFIG_ARCH_OMAP2430)             += sram243x.o
+
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ab9fc57d25f1..15675bce8012 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -41,6 +41,24 @@
 
 #define MAX_CLOCK_ENABLE_WAIT           100000
 
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER             1
+#define DPLL_MIN_DIVIDER                1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW             (1 << 0)
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate.  DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR               64
+#define DPLL_SCALE_BASE                 2
+#define DPLL_ROUNDING_VAL               ((DPLL_SCALE_BASE / 2) * \
+                                         (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
 u8 cpu_mask;
 
 /*-------------------------------------------------------------------------
@@ -95,7 +113,7 @@ u32 omap2_get_dpll_rate(struct clk *clk)
 {
         long long dpll_clk;
         u32 dpll_mult, dpll_div, dpll;
-        const struct dpll_data *dd;
+        struct dpll_data *dd;
 
         dd = clk->dpll_data;
         /* REVISIT: What do we return on error? */
@@ -603,7 +621,8 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
         clk->rate = clk->parent->rate / new_div;
 
         if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
-                __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+                prm_write_mod_reg(OMAP24XX_VALID_CONFIG,
+                        OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
                 wmb();
         }
 
@@ -723,6 +742,184 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
         return 0;
 }
 
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
+ * @clk: struct clk * of the DPLL
+ * @tolerance: maximum rate error tolerance
+ *
+ * Set the maximum DPLL rate error tolerance for the rate rounding
+ * algorithm.  The rate tolerance is an attempt to balance DPLL power
+ * saving (the least divider value "n") vs. rate fidelity (the least
+ * difference between the desired DPLL target rate and the rounded
+ * rate out of the algorithm).  So, increasing the tolerance is likely
+ * to decrease DPLL power consumption and increase DPLL rate error.
+ * Returns -EINVAL if provided a null clock ptr or a clk that is not a
+ * DPLL; or 0 upon success.
+ */
+int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
+{
+        if (!clk || !clk->dpll_data)
+                return -EINVAL;
+
+        clk->dpll_data->rate_tolerance = tolerance;
+
+        return 0;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, unsigned int m, unsigned int n)
+{
+        unsigned long long num;
+
+        num = (unsigned long long)parent_rate * m;
+        do_div(num, n);
+        return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL.  Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR.  The code will replace this with
+ * a non-scaled m upon return.  This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+                           unsigned long target_rate,
+                           unsigned long parent_rate)
+{
+        int flags = 0, carry = 0;
+
+        /* Unscale m and round if necessary */
+        if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+                carry = 1;
+        *m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+        /*
+         * The new rate must be <= the target rate to avoid programming
+         * a rate that is impossible for the hardware to handle
+         */
+        *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+        if (*new_rate > target_rate) {
+                (*m)--;
+                *new_rate = 0;
+        }
+
+        /* Guard against m underflow */
+        if (*m < DPLL_MIN_MULTIPLIER) {
+                *m = DPLL_MIN_MULTIPLIER;
+                *new_rate = 0;
+                flags = DPLL_MULT_UNDERFLOW;
+        }
+
+        if (*new_rate == 0)
+                *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+        return flags;
+}
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL, a desired target rate, and a rate tolerance, round
+ * the target rate to a possible, programmable rate for this DPLL.
+ * Rate tolerance is assumed to be set by the caller before this
+ * function is called.  Attempts to select the minimum possible n
+ * within the tolerance to reduce power consumption.  Stores the
+ * computed (m, n) in the DPLL's dpll_data structure so set_rate()
+ * will not need to call this (expensive) function again.  Returns ~0
+ * if the target rate cannot be rounded, either because the rate is
+ * too low or because the rate tolerance is set too tightly; or the
+ * rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
+{
+        int m, n, r, e, scaled_max_m;
+        unsigned long scaled_rt_rp, new_rate;
+        int min_e = -1, min_e_m = -1, min_e_n = -1;
+
+        if (!clk || !clk->dpll_data)
+                return ~0;
+
+        pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
+                 "%ld\n", clk->name, target_rate);
+
+        scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR);
+        scaled_max_m = clk->dpll_data->max_multiplier * DPLL_SCALE_FACTOR;
+
+        clk->dpll_data->last_rounded_rate = 0;
+
+        for (n = clk->dpll_data->max_divider; n >= DPLL_MIN_DIVIDER; n--) {
+
+                /* Compute the scaled DPLL multiplier, based on the divider */
+                m = scaled_rt_rp * n;
+
+                /*
+                 * Since we're counting n down, a m overflow means we can
+                 * can immediately skip to the next n
+                 */
+                if (m > scaled_max_m)
+                        continue;
+
+                r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+                                    clk->parent->rate);
+
+                e = target_rate - new_rate;
+                pr_debug("clock: n = %d: m = %d: rate error is %d "
+                         "(new_rate = %ld)\n", n, m, e, new_rate);
+
+                if (min_e == -1 ||
+                    min_e >= (int)(abs(e) - clk->dpll_data->rate_tolerance)) {
+                        min_e = e;
+                        min_e_m = m;
+                        min_e_n = n;
+
+                        pr_debug("clock: found new least error %d\n", min_e);
+                }
+
+                /*
+                 * Since we're counting n down, a m underflow means we
+                 * can bail out completely (since as n decreases in
+                 * the next iteration, there's no way that m can
+                 * increase beyond the current m)
+                 */
+                if (r & DPLL_MULT_UNDERFLOW)
+                        break;
+        }
+
+        if (min_e < 0) {
+                pr_debug("clock: error: target rate or tolerance too low\n");
+                return ~0;
+        }
+
+        clk->dpll_data->last_rounded_m = min_e_m;
+        clk->dpll_data->last_rounded_n = min_e_n;
+        clk->dpll_data->last_rounded_rate =
+                _dpll_compute_new_rate(clk->parent->rate, min_e_m,  min_e_n);
+
+        pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
+                 min_e, min_e_m, min_e_n);
+        pr_debug("clock: final rate: %ld  (target rate: %ld)\n",
+                 clk->dpll_data->last_rounded_rate, target_rate);
+
+        return clk->dpll_data->last_rounded_rate;
+}
+
 /*-------------------------------------------------------------------------
  * Omap2 clock reset and init functions
  *-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d5980a9e09a4..3cd37cb57c5a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -18,11 +18,16 @@
 
 #include <asm/arch/clock.h>
 
+/* The maximum error between a target DPLL rate and the rounded rate in Hz */
+#define DEFAULT_DPLL_RATE_TOLERANCE     50000
+
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
+int omap2_dpll_rate_tolerance_set(struct clk *clk, unsigned int tolerance);
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 void omap2_clk_disable_unused(struct clk *clk);
@@ -42,6 +47,7 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
 u32 omap2_get_dpll_rate(struct clk *clk);
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
+void omap2_clk_prepare_for_reboot(void);
 
 extern u8 cpu_mask;
 
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index ece32d8acba4..aa567876651d 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -154,7 +154,7 @@ static void omap2_clk_fixed_disable(struct clk *clk)
  * Uses the current prcm set to tell if a rate is valid.
  * You can go slower, but not faster within a given rate set.
  */
-static u32 omap2_dpll_round_rate(unsigned long target_rate)
+long omap2_dpllcore_round_rate(unsigned long target_rate)
 {
         u32 high, low, core_clk_src;
 
@@ -183,14 +183,14 @@ static u32 omap2_dpll_round_rate(unsigned long target_rate)
 
 }
 
-static void omap2_dpll_recalc(struct clk *clk)
+static void omap2_dpllcore_recalc(struct clk *clk)
 {
         clk->rate = omap2_get_dpll_rate_24xx(clk);
 
         propagate_rate(clk);
 }
 
-static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
+static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 {
         u32 cur_rate, low, mult, div, valid_rate, done_rate;
         u32 bypass = 0;
@@ -209,7 +209,7 @@ static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
         } else if ((rate == (cur_rate * 2)) && (mult == 1)) {
                 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
         } else if (rate != cur_rate) {
-                valid_rate = omap2_dpll_round_rate(rate);
+                valid_rate = omap2_dpllcore_round_rate(rate);
                 if (valid_rate != rate)
                         goto dpll_exit;
 
@@ -256,7 +256,7 @@ static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
                 omap2_init_memory_params(omap2_dll_force_needed());
                 omap2_reprogram_sdrc(done_rate, 0);
         }
-        omap2_dpll_recalc(&dpll_ck);
+        omap2_dpllcore_recalc(&dpll_ck);
         ret = 0;
 
 dpll_exit:
@@ -383,7 +383,7 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 
                 local_irq_restore(flags);
         }
-        omap2_dpll_recalc(&dpll_ck);
+        omap2_dpllcore_recalc(&dpll_ck);
 
         return 0;
 }
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 88081ed13f96..be4e25554e05 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -30,12 +30,12 @@ static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
 static void omap2_sys_clk_recalc(struct clk *clk);
 static void omap2_osc_clk_recalc(struct clk *clk);
 static void omap2_sys_clk_recalc(struct clk *clk);
-static void omap2_dpll_recalc(struct clk *clk);
+static void omap2_dpllcore_recalc(struct clk *clk);
 static int omap2_clk_fixed_enable(struct clk *clk);
 static void omap2_clk_fixed_disable(struct clk *clk);
 static int omap2_enable_osc_ck(struct clk *clk);
 static void omap2_disable_osc_ck(struct clk *clk);
-static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate);
+static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
 
 /* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
  * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
@@ -665,20 +665,27 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
  * deal with this
  */
 
-static const struct dpll_data dpll_dd = {
+static struct dpll_data dpll_dd = {
         .mult_div1_reg          = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
         .mult_mask              = OMAP24XX_DPLL_MULT_MASK,
         .div1_mask              = OMAP24XX_DPLL_DIV_MASK,
+        .max_multiplier         = 1024,
+        .max_divider            = 16,
+        .rate_tolerance         = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
+/*
+ * XXX Cannot add round_rate here yet, as this is still a composite clock,
+ * not just a DPLL
+ */
 static struct clk dpll_ck = {
         .name           = "dpll_ck",
         .parent         = &sys_ck,              /* Can be func_32k also */
         .dpll_data      = &dpll_dd,
         .flags          = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
                                 RATE_PROPAGATES | ALWAYS_ENABLED,
-        .recalc         = &omap2_dpll_recalc,
-        .set_rate       = &omap2_reprogram_dpll,
+        .recalc         = &omap2_dpllcore_recalc,
+        .set_rate       = &omap2_reprogram_dpllcore,
 };
 
 static struct clk apll96_ck = {
@@ -1747,7 +1754,8 @@ static struct clk gpt12_fck = {
 };
 
 static struct clk mcbsp1_ick = {
-        .name           = "mcbsp1_ick",
+        .name           = "mcbsp_ick",
+        .id             = 1,
         .parent         = &l4_ck,
         .flags          = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1756,7 +1764,8 @@ static struct clk mcbsp1_ick = {
 };
 
 static struct clk mcbsp1_fck = {
-        .name           = "mcbsp1_fck",
+        .name           = "mcbsp_fck",
+        .id             = 1,
         .parent         = &func_96m_ck,
         .flags          = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1765,7 +1774,8 @@ static struct clk mcbsp1_fck = {
 };
 
 static struct clk mcbsp2_ick = {
-        .name           = "mcbsp2_ick",
+        .name           = "mcbsp_ick",
+        .id             = 2,
         .parent         = &l4_ck,
         .flags          = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1774,7 +1784,8 @@ static struct clk mcbsp2_ick = {
 };
 
 static struct clk mcbsp2_fck = {
-        .name           = "mcbsp2_fck",
+        .name           = "mcbsp_fck",
+        .id             = 2,
         .parent         = &func_96m_ck,
         .flags          = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1783,7 +1794,8 @@ static struct clk mcbsp2_fck = {
 };
 
 static struct clk mcbsp3_ick = {
-        .name           = "mcbsp3_ick",
+        .name           = "mcbsp_ick",
+        .id             = 3,
         .parent         = &l4_ck,
         .flags          = CLOCK_IN_OMAP243X,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1792,7 +1804,8 @@ static struct clk mcbsp3_ick = {
 };
 
 static struct clk mcbsp3_fck = {
-        .name           = "mcbsp3_fck",
+        .name           = "mcbsp_fck",
+        .id             = 3,
         .parent         = &func_96m_ck,
         .flags          = CLOCK_IN_OMAP243X,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1801,7 +1814,8 @@ static struct clk mcbsp3_fck = {
 };
 
 static struct clk mcbsp4_ick = {
-        .name           = "mcbsp4_ick",
+        .name           = "mcbsp_ick",
+        .id             = 4,
         .parent         = &l4_ck,
         .flags          = CLOCK_IN_OMAP243X,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1810,7 +1824,8 @@ static struct clk mcbsp4_ick = {
 };
 
 static struct clk mcbsp4_fck = {
-        .name           = "mcbsp4_fck",
+        .name           = "mcbsp_fck",
+        .id             = 4,
         .parent         = &func_96m_ck,
         .flags          = CLOCK_IN_OMAP243X,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1819,7 +1834,8 @@ static struct clk mcbsp4_fck = {
 };
 
 static struct clk mcbsp5_ick = {
-        .name           = "mcbsp5_ick",
+        .name           = "mcbsp_ick",
+        .id             = 5,
         .parent         = &l4_ck,
         .flags          = CLOCK_IN_OMAP243X,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1828,7 +1844,8 @@ static struct clk mcbsp5_ick = {
 };
 
 static struct clk mcbsp5_fck = {
-        .name           = "mcbsp5_fck",
+        .name           = "mcbsp_fck",
+        .id             = 5,
         .parent         = &func_96m_ck,
         .flags          = CLOCK_IN_OMAP243X,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index b42bdd6079a5..4263099b1ad3 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -1,10 +1,11 @@
 /*
  * OMAP3-specific clock framework functions
  *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
  *
  * Parts of this code are based on code written by
  * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
@@ -23,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/limits.h>
 
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
@@ -37,8 +39,11 @@
 #include "cm.h"
 #include "cm-regbits-34xx.h"
 
-/* CM_CLKEN_PLL*.EN* bit values */
-#define DPLL_LOCKED             0x7
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE                   0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP            0x1
+
+#define MAX_DPLL_WAIT_TRIES             1000000
 
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
@@ -53,6 +58,290 @@ static void omap3_dpll_recalc(struct clk *clk)
         propagate_rate(clk);
 }
 
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
+{
+        const struct dpll_data *dd;
+
+        dd = clk->dpll_data;
+
+        cm_rmw_reg_bits(dd->enable_mask, clken_bits << __ffs(dd->enable_mask),
+                        dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
+{
+        const struct dpll_data *dd;
+        int i = 0;
+        int ret = -EINVAL;
+        u32 idlest_mask;
+
+        dd = clk->dpll_data;
+
+        state <<= dd->idlest_bit;
+        idlest_mask = 1 << dd->idlest_bit;
+
+        while (((cm_read_reg(dd->idlest_reg) & idlest_mask) != state) &&
+               i < MAX_DPLL_WAIT_TRIES) {
+                i++;
+                udelay(1);
+        }
+
+        if (i == MAX_DPLL_WAIT_TRIES) {
+                printk(KERN_ERR "clock: %s failed transition to '%s'\n",
+                       clk->name, (state) ? "locked" : "bypassed");
+        } else {
+                pr_debug("clock: %s transition to '%s' in %d loops\n",
+                         clk->name, (state) ? "locked" : "bypassed", i);
+
+                ret = 0;
+        }
+
+        return ret;
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
+ * readiness before returning.  Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code.  If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk *clk)
+{
+        u8 ai;
+        int r;
+
+        if (clk == &dpll3_ck)
+                return -EINVAL;
+
+        pr_debug("clock: locking DPLL %s\n", clk->name);
+
+        ai = omap3_dpll_autoidle_read(clk);
+
+        _omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+        if (ai) {
+                /*
+                 * If no downstream clocks are enabled, CM_IDLEST bit
+                 * may never become active, so don't wait for DPLL to lock.
+                 */
+                r = 0;
+                omap3_dpll_allow_idle(clk);
+        } else {
+                r = _omap3_wait_dpll_status(clk, 1);
+                omap3_dpll_deny_idle(clk);
+        };
+
+        return r;
+}
+
+/*
+ * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate.  Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code.  If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk *clk)
+{
+        int r;
+        u8 ai;
+
+        if (clk == &dpll3_ck)
+                return -EINVAL;
+
+        if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+                return -EINVAL;
+
+        pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+                 clk->name);
+
+        ai = omap3_dpll_autoidle_read(clk);
+
+        _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+        r = _omap3_wait_dpll_status(clk, 0);
+
+        if (ai)
+                omap3_dpll_allow_idle(clk);
+        else
+                omap3_dpll_deny_idle(clk);
+
+        return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code.  If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk *clk)
+{
+        u8 ai;
+
+        if (clk == &dpll3_ck)
+                return -EINVAL;
+
+        if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+                return -EINVAL;
+
+        pr_debug("clock: stopping DPLL %s\n", clk->name);
+
+        ai = omap3_dpll_autoidle_read(clk);
+
+        _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+        if (ai)
+                omap3_dpll_allow_idle(clk);
+        else
+                omap3_dpll_deny_idle(clk);
+
+        return 0;
+}
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+static int omap3_noncore_dpll_enable(struct clk *clk)
+{
+        int r;
+
+        if (clk == &dpll3_ck)
+                return -EINVAL;
+
+        if (clk->parent->rate == clk_get_rate(clk))
+                r = _omap3_noncore_dpll_bypass(clk);
+        else
+                r = _omap3_noncore_dpll_lock(clk);
+
+        return r;
+}
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+static void omap3_noncore_dpll_disable(struct clk *clk)
+{
+        if (clk == &dpll3_ck)
+                return;
+
+        _omap3_noncore_dpll_stop(clk);
+}
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk *clk)
+{
+        const struct dpll_data *dd;
+        u32 v;
+
+        if (!clk || !clk->dpll_data)
+                return -EINVAL;
+
+        dd = clk->dpll_data;
+
+        v = cm_read_reg(dd->autoidle_reg);
+        v &= dd->autoidle_mask;
+        v >>= __ffs(dd->autoidle_mask);
+
+        return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control.  This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430.  The DPLL will enter low-power stop when its downstream
+ * clocks are gated.  No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk *clk)
+{
+        const struct dpll_data *dd;
+
+        if (!clk || !clk->dpll_data)
+                return;
+
+        dd = clk->dpll_data;
+
+        /*
+         * REVISIT: CORE DPLL can optionally enter low-power bypass
+         * by writing 0x5 instead of 0x1.  Add some mechanism to
+         * optionally enter this mode.
+         */
+        cm_rmw_reg_bits(dd->autoidle_mask,
+                        DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask),
+                        dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control.  No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk *clk)
+{
+        const struct dpll_data *dd;
+
+        if (!clk || !clk->dpll_data)
+                return;
+
+        dd = clk->dpll_data;
+
+        cm_rmw_reg_bits(dd->autoidle_mask,
+                        DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask),
+                        dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
 /**
  * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
  * @clk: DPLL output struct clk
@@ -89,6 +378,8 @@ static void omap3_clkoutx2_recalc(struct clk *clk)
                 propagate_rate(clk);
 }
 
+/* Common clock code */
+
 /*
  * As it is structured now, this will prevent an OMAP2/3 multiboot
  * kernel from compiling.  This will need further attention.
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index c9c5972a2e25..05757eb032bc 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1,14 +1,19 @@
 /*
  * OMAP3 clock framework
  *
- * Virtual clocks are introduced as a convenient tools.
- * They are sources for other clocks and not supposed
- * to be requested from drivers directly.
- *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
  * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
+ * With many device clock fixes by Kevin Hilman and Jouni Högander
+ * DPLL bypass clock support added by Roman Tereshonkov
+ *
+ */
+
+/*
+ * Virtual clocks are introduced as convenient tools.
+ * They are sources for other clocks and not supposed
+ * to be requested from drivers directly.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
@@ -24,6 +29,15 @@
 
 static void omap3_dpll_recalc(struct clk *clk);
 static void omap3_clkoutx2_recalc(struct clk *clk);
+static void omap3_dpll_allow_idle(struct clk *clk);
+static void omap3_dpll_deny_idle(struct clk *clk);
+static u32 omap3_dpll_autoidle_read(struct clk *clk);
+static int omap3_noncore_dpll_enable(struct clk *clk);
+static void omap3_noncore_dpll_disable(struct clk *clk);
+
+/* Maximum DPLL multiplier, divider values for OMAP3 */
+#define OMAP3_MAX_DPLL_MULT             2048
+#define OMAP3_MAX_DPLL_DIV              128
 
 /*
  * DPLL1 supplies clock to the MPU.
@@ -33,6 +47,11 @@ static void omap3_clkoutx2_recalc(struct clk *clk);
  * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
  */
 
+/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
+#define DPLL_LOW_POWER_STOP             0x1
+#define DPLL_LOW_POWER_BYPASS           0x5
+#define DPLL_LOCKED                     0x7
+
 /* PRM CLOCKS */
 
 /* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
@@ -240,15 +259,23 @@ static const struct clksel_rate div16_dpll_rates[] = {
 /* DPLL1 */
 /* MPU clock source */
 /* Type: DPLL */
-static const struct dpll_data dpll1_dd = {
+static struct dpll_data dpll1_dd = {
         .mult_div1_reg  = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
         .mult_mask      = OMAP3430_MPU_DPLL_MULT_MASK,
         .div1_mask      = OMAP3430_MPU_DPLL_DIV_MASK,
         .control_reg    = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
         .enable_mask    = OMAP3430_EN_MPU_DPLL_MASK,
+        .modes          = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
         .auto_recal_bit = OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
         .recal_en_bit   = OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
         .recal_st_bit   = OMAP3430_MPU_DPLL_ST_SHIFT,
+        .autoidle_reg   = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+        .autoidle_mask  = OMAP3430_AUTO_MPU_DPLL_MASK,
+        .idlest_reg     = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+        .idlest_bit     = OMAP3430_ST_MPU_CLK_SHIFT,
+        .max_multiplier = OMAP3_MAX_DPLL_MULT,
+        .max_divider    = OMAP3_MAX_DPLL_DIV,
+        .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll1_ck = {
@@ -256,6 +283,7 @@ static struct clk dpll1_ck = {
         .parent         = &sys_ck,
         .dpll_data      = &dpll1_dd,
         .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+        .round_rate     = &omap2_dpll_round_rate,
         .recalc         = &omap3_dpll_recalc,
 };
 
@@ -297,22 +325,34 @@ static struct clk dpll1_x2m2_ck = {
 /* IVA2 clock source */
 /* Type: DPLL */
 
-static const struct dpll_data dpll2_dd = {
+static struct dpll_data dpll2_dd = {
         .mult_div1_reg  = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
         .mult_mask      = OMAP3430_IVA2_DPLL_MULT_MASK,
         .div1_mask      = OMAP3430_IVA2_DPLL_DIV_MASK,
         .control_reg    = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
         .enable_mask    = OMAP3430_EN_IVA2_DPLL_MASK,
+        .modes          = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
+                                (1 << DPLL_LOW_POWER_BYPASS),
         .auto_recal_bit = OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
         .recal_en_bit   = OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
         .recal_st_bit   = OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
+        .autoidle_reg   = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+        .autoidle_mask  = OMAP3430_AUTO_IVA2_DPLL_MASK,
+        .idlest_reg     = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
+        .idlest_bit     = OMAP3430_ST_IVA2_CLK_SHIFT,
+        .max_multiplier = OMAP3_MAX_DPLL_MULT,
+        .max_divider    = OMAP3_MAX_DPLL_DIV,
+        .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll2_ck = {
         .name           = "dpll2_ck",
         .parent         = &sys_ck,
         .dpll_data      = &dpll2_dd,
-        .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+        .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+        .enable         = &omap3_noncore_dpll_enable,
+        .disable        = &omap3_noncore_dpll_disable,
+        .round_rate     = &omap2_dpll_round_rate,
         .recalc         = &omap3_dpll_recalc,
 };
 
@@ -338,10 +378,12 @@ static struct clk dpll2_m2_ck = {
         .recalc         = &omap2_clksel_recalc,
 };
 
-/* DPLL3 */
-/* Source clock for all interfaces and for some device fclks */
-/* Type: DPLL */
-static const struct dpll_data dpll3_dd = {
+/*
+ * DPLL3
+ * Source clock for all interfaces and for some device fclks
+ * REVISIT: Also supports fast relock bypass - not included below
+ */
+static struct dpll_data dpll3_dd = {
         .mult_div1_reg  = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
         .mult_mask      = OMAP3430_CORE_DPLL_MULT_MASK,
         .div1_mask      = OMAP3430_CORE_DPLL_DIV_MASK,
@@ -350,6 +392,11 @@ static const struct dpll_data dpll3_dd = {
         .auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
         .recal_en_bit   = OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
         .recal_st_bit   = OMAP3430_CORE_DPLL_ST_SHIFT,
+        .autoidle_reg   = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+        .autoidle_mask  = OMAP3430_AUTO_CORE_DPLL_MASK,
+        .max_multiplier = OMAP3_MAX_DPLL_MULT,
+        .max_divider    = OMAP3_MAX_DPLL_DIV,
+        .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll3_ck = {
@@ -357,6 +404,7 @@ static struct clk dpll3_ck = {
         .parent         = &sys_ck,
         .dpll_data      = &dpll3_dd,
         .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+        .round_rate     = &omap2_dpll_round_rate,
         .recalc         = &omap3_dpll_recalc,
 };
 
@@ -439,7 +487,7 @@ static struct clk core_ck = {
         .name           = "core_ck",
         .init           = &omap2_init_clksel_parent,
         .clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-        .clksel_mask    = OMAP3430_ST_CORE_CLK,
+        .clksel_mask    = OMAP3430_ST_CORE_CLK_MASK,
         .clksel         = core_ck_clksel,
         .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
                                 PARENT_CONTROLS_CLOCK,
@@ -456,7 +504,7 @@ static struct clk dpll3_m2x2_ck = {
         .name           = "dpll3_m2x2_ck",
         .init           = &omap2_init_clksel_parent,
         .clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-        .clksel_mask    = OMAP3430_ST_CORE_CLK,
+        .clksel_mask    = OMAP3430_ST_CORE_CLK_MASK,
         .clksel         = dpll3_m2x2_ck_clksel,
         .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
                                 PARENT_CONTROLS_CLOCK,
@@ -503,7 +551,7 @@ static struct clk emu_core_alwon_ck = {
         .parent         = &dpll3_m3x2_ck,
         .init           = &omap2_init_clksel_parent,
         .clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-        .clksel_mask    = OMAP3430_ST_CORE_CLK,
+        .clksel_mask    = OMAP3430_ST_CORE_CLK_MASK,
         .clksel         = emu_core_alwon_ck_clksel,
         .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
                                 PARENT_CONTROLS_CLOCK,
@@ -513,22 +561,33 @@ static struct clk emu_core_alwon_ck = {
 /* DPLL4 */
 /* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
 /* Type: DPLL */
-static const struct dpll_data dpll4_dd = {
+static struct dpll_data dpll4_dd = {
         .mult_div1_reg  = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
         .mult_mask      = OMAP3430_PERIPH_DPLL_MULT_MASK,
         .div1_mask      = OMAP3430_PERIPH_DPLL_DIV_MASK,
         .control_reg    = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
         .enable_mask    = OMAP3430_EN_PERIPH_DPLL_MASK,
+        .modes          = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
         .auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
         .recal_en_bit   = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
         .recal_st_bit   = OMAP3430_PERIPH_DPLL_ST_SHIFT,
+        .autoidle_reg   = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+        .autoidle_mask  = OMAP3430_AUTO_PERIPH_DPLL_MASK,
+        .idlest_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+        .idlest_bit     = OMAP3430_ST_PERIPH_CLK_SHIFT,
+        .max_multiplier = OMAP3_MAX_DPLL_MULT,
+        .max_divider    = OMAP3_MAX_DPLL_DIV,
+        .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll4_ck = {
         .name           = "dpll4_ck",
         .parent         = &sys_ck,
         .dpll_data      = &dpll4_dd,
-        .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+        .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+        .enable         = &omap3_noncore_dpll_enable,
+        .disable        = &omap3_noncore_dpll_disable,
+        .round_rate     = &omap2_dpll_round_rate,
         .recalc         = &omap3_dpll_recalc,
 };
 
@@ -584,7 +643,7 @@ static struct clk omap_96m_alwon_fck = {
         .parent         = &dpll4_m2x2_ck,
         .init           = &omap2_init_clksel_parent,
         .clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-        .clksel_mask    = OMAP3430_ST_PERIPH_CLK,
+        .clksel_mask    = OMAP3430_ST_PERIPH_CLK_MASK,
         .clksel         = omap_96m_alwon_fck_clksel,
         .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
                                  PARENT_CONTROLS_CLOCK,
@@ -610,7 +669,7 @@ static struct clk cm_96m_fck = {
         .parent         = &dpll4_m2x2_ck,
         .init           = &omap2_init_clksel_parent,
         .clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-        .clksel_mask    = OMAP3430_ST_PERIPH_CLK,
+        .clksel_mask    = OMAP3430_ST_PERIPH_CLK_MASK,
         .clksel         = cm_96m_fck_clksel,
         .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
                                 PARENT_CONTROLS_CLOCK,
@@ -652,7 +711,7 @@ static struct clk virt_omap_54m_fck = {
         .parent         = &dpll4_m3x2_ck,
         .init           = &omap2_init_clksel_parent,
         .clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-        .clksel_mask    = OMAP3430_ST_PERIPH_CLK,
+        .clksel_mask    = OMAP3430_ST_PERIPH_CLK_MASK,
         .clksel         = virt_omap_54m_fck_clksel,
         .flags          = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
                                 PARENT_CONTROLS_CLOCK,
@@ -804,23 +863,33 @@ static struct clk emu_per_alwon_ck = {
 /* Supplies 120MHz clock, USIM source clock */
 /* Type: DPLL */
 /* 3430ES2 only */
-static const struct dpll_data dpll5_dd = {
+static struct dpll_data dpll5_dd = {
         .mult_div1_reg  = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
         .mult_mask      = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
         .div1_mask      = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
         .control_reg    = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
         .enable_mask    = OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
+        .modes          = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
         .auto_recal_bit = OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
         .recal_en_bit   = OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
         .recal_st_bit   = OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
+        .autoidle_reg   = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
+        .autoidle_mask  = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
+        .idlest_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+        .idlest_bit     = OMAP3430ES2_ST_PERIPH2_CLK_SHIFT,
+        .max_multiplier = OMAP3_MAX_DPLL_MULT,
+        .max_divider    = OMAP3_MAX_DPLL_DIV,
+        .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll5_ck = {
         .name           = "dpll5_ck",
         .parent         = &sys_ck,
         .dpll_data      = &dpll5_dd,
-        .flags          = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
-                                ALWAYS_ENABLED,
+        .flags          = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+        .enable         = &omap3_noncore_dpll_enable,
+        .disable        = &omap3_noncore_dpll_disable,
+        .round_rate     = &omap2_dpll_round_rate,
         .recalc         = &omap3_dpll_recalc,
 };
 
@@ -1365,7 +1434,8 @@ static const struct clksel mcbsp_15_clksel[] = {
 };
 
 static struct clk mcbsp5_fck = {
-        .name           = "mcbsp5_fck",
+        .name           = "mcbsp_fck",
+        .id             = 5,
         .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
         .enable_bit     = OMAP3430_EN_MCBSP5_SHIFT,
@@ -1377,7 +1447,8 @@ static struct clk mcbsp5_fck = {
 };
 
 static struct clk mcbsp1_fck = {
-        .name           = "mcbsp1_fck",
+        .name           = "mcbsp_fck",
+        .id             = 1,
         .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
         .enable_bit     = OMAP3430_EN_MCBSP1_SHIFT,
@@ -1789,7 +1860,8 @@ static struct clk gpt10_ick = {
 };
 
 static struct clk mcbsp5_ick = {
-        .name           = "mcbsp5_ick",
+        .name           = "mcbsp_ick",
+        .id             = 5,
         .parent         = &core_l4_ick,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
         .enable_bit     = OMAP3430_EN_MCBSP5_SHIFT,
@@ -1798,7 +1870,8 @@ static struct clk mcbsp5_ick = {
 };
 
 static struct clk mcbsp1_ick = {
-        .name           = "mcbsp1_ick",
+        .name           = "mcbsp_ick",
+        .id             = 1,
         .parent         = &core_l4_ick,
         .enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
         .enable_bit     = OMAP3430_EN_MCBSP1_SHIFT,
@@ -1935,7 +2008,7 @@ static struct clk dss1_alwon_fck = {
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
         .enable_bit     = OMAP3430_EN_DSS1_SHIFT,
         .clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-        .clksel_mask    = OMAP3430_ST_PERIPH_CLK,
+        .clksel_mask    = OMAP3430_ST_PERIPH_CLK_MASK,
         .clksel         = dss1_alwon_fck_clksel,
         .flags          = CLOCK_IN_OMAP343X,
         .recalc         = &omap2_clksel_recalc,
@@ -1991,7 +2064,7 @@ static struct clk cam_mclk = {
         .parent         = &dpll4_m5x2_ck,
         .init           = &omap2_init_clksel_parent,
         .clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-        .clksel_mask    = OMAP3430_ST_PERIPH_CLK,
+        .clksel_mask    = OMAP3430_ST_PERIPH_CLK_MASK,
         .clksel         = cam_mclk_clksel,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
         .enable_bit     = OMAP3430_EN_CAM_SHIFT,
@@ -2541,7 +2614,8 @@ static struct clk gpt2_ick = {
 };
 
 static struct clk mcbsp2_ick = {
-        .name           = "mcbsp2_ick",
+        .name           = "mcbsp_ick",
+        .id             = 2,
         .parent         = &per_l4_ick,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
         .enable_bit     = OMAP3430_EN_MCBSP2_SHIFT,
@@ -2550,7 +2624,8 @@ static struct clk mcbsp2_ick = {
 };
 
 static struct clk mcbsp3_ick = {
-        .name           = "mcbsp3_ick",
+        .name           = "mcbsp_ick",
+        .id             = 3,
         .parent         = &per_l4_ick,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
         .enable_bit     = OMAP3430_EN_MCBSP3_SHIFT,
@@ -2559,7 +2634,8 @@ static struct clk mcbsp3_ick = {
 };
 
 static struct clk mcbsp4_ick = {
-        .name           = "mcbsp4_ick",
+        .name           = "mcbsp_ick",
+        .id             = 4,
         .parent         = &per_l4_ick,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
         .enable_bit     = OMAP3430_EN_MCBSP4_SHIFT,
@@ -2574,7 +2650,8 @@ static const struct clksel mcbsp_234_clksel[] = {
 };
 
 static struct clk mcbsp2_fck = {
-        .name           = "mcbsp2_fck",
+        .name           = "mcbsp_fck",
+        .id             = 2,
         .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
         .enable_bit     = OMAP3430_EN_MCBSP2_SHIFT,
@@ -2586,7 +2663,8 @@ static struct clk mcbsp2_fck = {
 };
 
 static struct clk mcbsp3_fck = {
-        .name           = "mcbsp3_fck",
+        .name           = "mcbsp_fck",
+        .id             = 3,
         .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
         .enable_bit     = OMAP3430_EN_MCBSP3_SHIFT,
@@ -2598,7 +2676,8 @@ static struct clk mcbsp3_fck = {
 };
 
 static struct clk mcbsp4_fck = {
-        .name           = "mcbsp4_fck",
+        .name           = "mcbsp_fck",
+        .id             = 4,
         .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
         .enable_bit     = OMAP3430_EN_MCBSP4_SHIFT,
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 3c38395f6442..ee4c0ca1a708 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -72,7 +72,8 @@
 #define OMAP3430_ST_IVA2                                (1 << 0)
 
 /* CM_IDLEST_PLL_IVA2 */
-#define OMAP3430_ST_IVA2_CLK                            (1 << 0)
+#define OMAP3430_ST_IVA2_CLK_SHIFT                      0
+#define OMAP3430_ST_IVA2_CLK_MASK                       (1 << 0)
 
 /* CM_AUTOIDLE_PLL_IVA2 */
 #define OMAP3430_AUTO_IVA2_DPLL_SHIFT                   0
@@ -115,10 +116,7 @@
 #define OMAP3430_ST_MPU                                 (1 << 0)
 
 /* CM_IDLEST_PLL_MPU */
-#define OMAP3430_ST_MPU_CLK                             (1 << 0)
-#define OMAP3430_ST_IVA2_CLK_MASK                       (1 << 0)
-
-/* CM_IDLEST_PLL_MPU */
+#define OMAP3430_ST_MPU_CLK_SHIFT                       0
 #define OMAP3430_ST_MPU_CLK_MASK                        (1 << 0)
 
 /* CM_AUTOIDLE_PLL_MPU */
@@ -408,8 +406,10 @@
 #define OMAP3430_ST_12M_CLK                             (1 << 4)
 #define OMAP3430_ST_48M_CLK                             (1 << 3)
 #define OMAP3430_ST_96M_CLK                             (1 << 2)
-#define OMAP3430_ST_PERIPH_CLK                          (1 << 1)
-#define OMAP3430_ST_CORE_CLK                            (1 << 0)
+#define OMAP3430_ST_PERIPH_CLK_SHIFT                    1
+#define OMAP3430_ST_PERIPH_CLK_MASK                     (1 << 1)
+#define OMAP3430_ST_CORE_CLK_SHIFT                      0
+#define OMAP3430_ST_CORE_CLK_MASK                       (1 << 0)
 
 /* CM_IDLEST2_CKGEN */
 #define OMAP3430ES2_ST_120M_CLK_SHIFT                   1
@@ -423,6 +423,10 @@
 #define OMAP3430_AUTO_CORE_DPLL_SHIFT                   0
 #define OMAP3430_AUTO_CORE_DPLL_MASK                    (0x7 << 0)
 
+/* CM_AUTOIDLE2_PLL */
+#define OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT             0
+#define OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK              (0x7 << 0)
+
 /* CM_CLKSEL1_PLL */
 /* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */
 #define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT             27
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 8489f3029fed..87a44c715aa4 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -81,6 +81,7 @@
 #define OMAP3430ES2_CM_FCLKEN3                          0x0008
 #define OMAP3430_CM_IDLEST_PLL                          CM_IDLEST2
 #define OMAP3430_CM_AUTOIDLE_PLL                        CM_AUTOIDLE2
+#define OMAP3430ES2_CM_AUTOIDLE2_PLL                    CM_AUTOIDLE2
 #define OMAP3430_CM_CLKSEL1                             CM_CLKSEL
 #define OMAP3430_CM_CLKSEL1_PLL                         CM_CLKSEL
 #define OMAP3430_CM_CLKSEL2_PLL                         CM_CLKSEL2
@@ -96,15 +97,21 @@
 /* Clock management domain register get/set */
 
 #ifndef __ASSEMBLER__
-static inline void cm_write_mod_reg(u32 val, s16 module, s16 idx)
+
+extern u32 cm_read_mod_reg(s16 module, u16 idx);
+extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
+extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+
+static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
-        __raw_writel(val, OMAP_CM_REGADDR(module, idx));
+        return cm_rmw_mod_reg_bits(bits, bits, module, idx);
 }
 
-static inline u32 cm_read_mod_reg(s16 module, s16 idx)
+static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
-        return __raw_readl(OMAP_CM_REGADDR(module, idx));
+        return cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
 }
+
 #endif
 
 /* CM register bits shared between 24XX and 3430 */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index a5d86a49c213..51f70300996f 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -13,22 +13,21 @@
 #undef DEBUG
 
 #include <linux/kernel.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
-
+#include <asm/arch/common.h>
 #include <asm/arch/control.h>
 
-static u32 omap2_ctrl_base;
+static void __iomem *omap2_ctrl_base;
 
-#define OMAP_CTRL_REGADDR(reg)  (void __iomem *)IO_ADDRESS(omap2_ctrl_base \
-                                                                + (reg))
+#define OMAP_CTRL_REGADDR(reg)          (omap2_ctrl_base + (reg))
 
-void omap_ctrl_base_set(u32 base)
+void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
 {
-        omap2_ctrl_base = base;
+        omap2_ctrl_base = omap2_globals->ctrl;
 }
 
-u32 omap_ctrl_base_get(void)
+void __iomem *omap_ctrl_base_get(void)
 {
         return omap2_ctrl_base;
 }
@@ -50,25 +49,16 @@ u32 omap_ctrl_readl(u16 offset)
 
 void omap_ctrl_writeb(u8 val, u16 offset)
 {
-        pr_debug("omap_ctrl_writeb: writing 0x%0x to 0x%0x\n", val,
-                 (u32)OMAP_CTRL_REGADDR(offset));
-
         __raw_writeb(val, OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writew(u16 val, u16 offset)
 {
-        pr_debug("omap_ctrl_writew: writing 0x%0x to 0x%0x\n", val,
-                 (u32)OMAP_CTRL_REGADDR(offset));
-
         __raw_writew(val, OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writel(u32 val, u16 offset)
 {
-        pr_debug("omap_ctrl_writel: writing 0x%0x to 0x%0x\n", val,
-                 (u32)OMAP_CTRL_REGADDR(offset));
-
         __raw_writel(val, OMAP_CTRL_REGADDR(offset));
 }
 
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 4dfd878d7968..dff4b16cead6 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -17,16 +17,23 @@
 
 #include <asm/io.h>
 
-#if defined(CONFIG_ARCH_OMAP2420)
-#define OMAP24XX_TAP_BASE       io_p2v(0x48014000)
-#endif
+#include <asm/arch/control.h>
+#include <asm/arch/cpu.h>
 
-#if defined(CONFIG_ARCH_OMAP2430)
-#define OMAP24XX_TAP_BASE       io_p2v(0x4900A000)
+#if defined(CONFIG_ARCH_OMAP2420)
+#define TAP_BASE        io_p2v(0x48014000)
+#elif defined(CONFIG_ARCH_OMAP2430)
+#define TAP_BASE        io_p2v(0x4900A000)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define TAP_BASE        io_p2v(0x4830A000)
 #endif
 
 #define OMAP_TAP_IDCODE         0x0204
+#if defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP_TAP_PROD_ID        0x0210
+#else
 #define OMAP_TAP_PROD_ID        0x0208
+#endif
 
 #define OMAP_TAP_DIE_ID_0       0x0218
 #define OMAP_TAP_DIE_ID_1       0x021C
@@ -56,9 +63,134 @@ static struct omap_id omap_ids[] __initdata = {
         { .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
 };
 
+static struct omap_chip_id omap_chip;
+
+/**
+ * omap_chip_is - test whether currently running OMAP matches a chip type
+ * @oc: omap_chip_t to test against
+ *
+ * Test whether the currently-running OMAP chip matches the supplied
+ * chip type 'oc'.  Returns 1 upon a match; 0 upon failure.
+ */
+int omap_chip_is(struct omap_chip_id oci)
+{
+        return (oci.oc & omap_chip.oc) ? 1 : 0;
+}
+EXPORT_SYMBOL(omap_chip_is);
+
 static u32 __init read_tap_reg(int reg)
 {
-        return __raw_readl(OMAP24XX_TAP_BASE + reg);
+        unsigned int regval = 0;
+        u32 cpuid;
+
+        /* Reading the IDCODE register on 3430 ES1 results in a
+         * data abort as the register is not exposed on the OCP
+         * Hence reading the Cortex Rev
+         */
+        cpuid = read_cpuid(CPUID_ID);
+
+        /* If the processor type is Cortex-A8 and the revision is 0x0
+         * it means its Cortex r0p0 which is 3430 ES1
+         */
+        if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
+                switch (reg) {
+                case OMAP_TAP_IDCODE  : regval = 0x0B7AE02F; break;
+                /* Making DevType as 0xF in ES1 to differ from ES2 */
+                case OMAP_TAP_PROD_ID : regval = 0x000F00F0; break;
+                case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break;
+                case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break;
+                case OMAP_TAP_DIE_ID_2: regval = 0x00000000; break;
+                case OMAP_TAP_DIE_ID_3: regval = 0x2d2c0000; break;
+                }
+        } else
+                regval = __raw_readl(TAP_BASE + reg);
+
+        return regval;
+
+}
+
+/*
+ * _set_system_rev - set the system_rev global based on current OMAP chip type
+ *
+ * Set the system_rev global.  This is primarily used by the cpu_is_omapxxxx()
+ * macros.
+ */
+static void __init _set_system_rev(u32 type, u8 rev)
+{
+        u32 i, ctrl_status;
+
+        /*
+         * system_rev encoding is as follows
+         * system_rev & 0xff000000 -> Omap Class (24xx/34xx)
+         * system_rev & 0xfff00000 -> Omap Sub Class (242x/343x)
+         * system_rev & 0xffff0000 -> Omap type (2420/2422/2423/2430/3430)
+         * system_rev & 0x0000f000 -> Silicon revision (ES1, ES2 )
+         * system_rev & 0x00000700 -> Device Type ( EMU/HS/GP/BAD )
+         * system_rev & 0x000000c0 -> IDCODE revision[6:7]
+         * system_rev & 0x0000003f -> sys_boot[0:5]
+         */
+        /* Embedding the ES revision info in type field */
+        system_rev = type;
+        /* Also add IDCODE revision info only two lower bits */
+        system_rev |= ((rev & 0x3) << 6);
+
+        /* Add in the device type and sys_boot fields (see above) */
+        if (cpu_is_omap24xx()) {
+                i = OMAP24XX_CONTROL_STATUS;
+        } else if (cpu_is_omap343x()) {
+                i = OMAP343X_CONTROL_STATUS;
+        } else {
+                printk(KERN_ERR "id: unknown CPU type\n");
+                BUG();
+        }
+        ctrl_status = omap_ctrl_readl(i);
+        system_rev |= (ctrl_status & (OMAP2_SYSBOOT_5_MASK |
+                                      OMAP2_SYSBOOT_4_MASK |
+                                      OMAP2_SYSBOOT_3_MASK |
+                                      OMAP2_SYSBOOT_2_MASK |
+                                      OMAP2_SYSBOOT_1_MASK |
+                                      OMAP2_SYSBOOT_0_MASK));
+        system_rev |= (ctrl_status & OMAP2_DEVICETYPE_MASK);
+}
+
+
+/*
+ * _set_omap_chip - set the omap_chip global based on OMAP chip type
+ *
+ * Build the omap_chip bits.  This variable is used by powerdomain and
+ * clockdomain code to indicate whether structures are applicable for
+ * the current OMAP chip type by ANDing it against a 'platform' bitfield
+ * in the structure.
+ */
+static void __init _set_omap_chip(void)
+{
+        if (cpu_is_omap343x()) {
+
+                omap_chip.oc = CHIP_IS_OMAP3430;
+                if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0))
+                        omap_chip.oc |= CHIP_IS_OMAP3430ES1;
+                else if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0))
+                        omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+
+        } else if (cpu_is_omap243x()) {
+
+                /* Currently only supports 2430ES2.1 and 2430-all */
+                omap_chip.oc |= CHIP_IS_OMAP2430;
+
+        } else if (cpu_is_omap242x()) {
+
+                /* Currently only supports 2420ES2.1.1 and 2420-all */
+                omap_chip.oc |= CHIP_IS_OMAP2420;
+
+        } else {
+
+                /* Current CPU not supported by this code. */
+                printk(KERN_WARNING "OMAP chip type code does not yet support "
+                       "this CPU type.\n");
+                WARN_ON(1);
+
+        }
+
 }
 
 void __init omap2_check_revision(void)
@@ -76,21 +208,31 @@ void __init omap2_check_revision(void)
         rev = (idcode >> 28) & 0x0f;
         dev_type = (prod_id >> 16) & 0x0f;
 
-#ifdef DEBUG
-        printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
-                idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
-        printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n",
-                read_tap_reg(OMAP_TAP_DIE_ID_0));
-        printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
-                read_tap_reg(OMAP_TAP_DIE_ID_1),
-               (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
-        printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n",
-                read_tap_reg(OMAP_TAP_DIE_ID_2));
-        printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n",
-                read_tap_reg(OMAP_TAP_DIE_ID_3));
-        printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
-                prod_id, dev_type);
-#endif
+        pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
+                 idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
+        pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n",
+                 read_tap_reg(OMAP_TAP_DIE_ID_0));
+        pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
+                 read_tap_reg(OMAP_TAP_DIE_ID_1),
+                 (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
+        pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n",
+                 read_tap_reg(OMAP_TAP_DIE_ID_2));
+        pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n",
+                 read_tap_reg(OMAP_TAP_DIE_ID_3));
+        pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
+                 prod_id, dev_type);
+
+        /*
+         * Detection for 34xx ES2.0 and above can be done with just
+         * hawkeye and rev. See TRM 1.5.2 Device Identification.
+         * Note that rev cannot be used directly as ES1.0 uses value 0.
+         */
+        if (hawkeye == 0xb7ae) {
+                system_rev = 0x34300000 | ((1 + rev) << 12);
+                pr_info("OMAP%04x ES2.%i\n", system_rev >> 16, rev);
+                _set_omap_chip();
+                return;
+        }
 
         /* Check hawkeye ids */
         for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
@@ -114,16 +256,15 @@ void __init omap2_check_revision(void)
                                 omap_ids[i].type >> 16);
                 j = i;
         }
-        system_rev = omap_ids[j].type;
 
-        system_rev |= rev << 8;
+        _set_system_rev(omap_ids[j].type, rev);
 
-        /* Add the cpu class info (24xx) */
-        system_rev |= 0x24;
+        _set_omap_chip();
 
         pr_info("OMAP%04x", system_rev >> 16);
         if ((system_rev >> 8) & 0x0f)
-                printk("%x", (system_rev >> 8) & 0x0f);
-        printk("\n");
+                pr_info("ES%x", (system_rev >> 12) & 0xf);
+        pr_info("\n");
+
 }
 
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
new file mode 100644
index 000000000000..17cf199d1130
--- /dev/null
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -0,0 +1,208 @@
+/*
+ * linux/arch/arm/mach-omap2/mcbsp.c
+ *
+ * Copyright (C) 2008 Instituto Nokia de Tecnologia
+ * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Multichannel mode not supported.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/mcbsp.h>
+
+struct mcbsp_internal_clk {
+        struct clk clk;
+        struct clk **childs;
+        int n_childs;
+};
+
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
+{
+        const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
+        int i;
+
+        mclk->n_childs = ARRAY_SIZE(clk_names);
+        mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
+                                GFP_KERNEL);
+
+        for (i = 0; i < mclk->n_childs; i++) {
+                /* We fake a platform device to get correct device id */
+                struct platform_device pdev;
+
+                pdev.dev.bus = &platform_bus_type;
+                pdev.id = mclk->clk.id;
+                mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
+                if (IS_ERR(mclk->childs[i]))
+                        printk(KERN_ERR "Could not get clock %s (%d).\n",
+                                clk_names[i], mclk->clk.id);
+        }
+}
+
+static int omap_mcbsp_clk_enable(struct clk *clk)
+{
+        struct mcbsp_internal_clk *mclk = container_of(clk,
+                                        struct mcbsp_internal_clk, clk);
+        int i;
+
+        for (i = 0; i < mclk->n_childs; i++)
+                clk_enable(mclk->childs[i]);
+        return 0;
+}
+
+static void omap_mcbsp_clk_disable(struct clk *clk)
+{
+        struct mcbsp_internal_clk *mclk = container_of(clk,
+                                        struct mcbsp_internal_clk, clk);
+        int i;
+
+        for (i = 0; i < mclk->n_childs; i++)
+                clk_disable(mclk->childs[i]);
+}
+
+static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
+        {
+                .clk = {
+                        .name           = "mcbsp_clk",
+                        .id             = 1,
+                        .enable         = omap_mcbsp_clk_enable,
+                        .disable        = omap_mcbsp_clk_disable,
+                },
+        },
+        {
+                .clk = {
+                        .name           = "mcbsp_clk",
+                        .id             = 2,
+                        .enable         = omap_mcbsp_clk_enable,
+                        .disable        = omap_mcbsp_clk_disable,
+                },
+        },
+};
+
+#define omap_mcbsp_clks_size    ARRAY_SIZE(omap_mcbsp_clks)
+#else
+#define omap_mcbsp_clks_size    0
+static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
+static inline void omap_mcbsp_clk_init(struct clk *clk)
+{ }
+#endif
+
+static void omap2_mcbsp2_mux_setup(void)
+{
+        omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
+        omap_cfg_reg(R14_24XX_MCBSP2_FSX);
+        omap_cfg_reg(W15_24XX_MCBSP2_DR);
+        omap_cfg_reg(V15_24XX_MCBSP2_DX);
+        omap_cfg_reg(V14_24XX_GPIO117);
+        /*
+         * TODO: Need to add MUX settings for OMAP 2430 SDP
+         */
+}
+
+static void omap2_mcbsp_request(unsigned int id)
+{
+        if (cpu_is_omap2420() && (id == OMAP_MCBSP2))
+                omap2_mcbsp2_mux_setup();
+}
+
+static int omap2_mcbsp_check(unsigned int id)
+{
+        if (id > OMAP_MAX_MCBSP_COUNT - 1) {
+                printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
+                return -ENODEV;
+        }
+        return 0;
+}
+
+static struct omap_mcbsp_ops omap2_mcbsp_ops = {
+        .request        = omap2_mcbsp_request,
+        .check          = omap2_mcbsp_check,
+};
+
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
+        {
+                .virt_base      = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
+                .dma_rx_sync    = OMAP24XX_DMA_MCBSP1_RX,
+                .dma_tx_sync    = OMAP24XX_DMA_MCBSP1_TX,
+                .rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
+                .tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
+                .ops            = &omap2_mcbsp_ops,
+                .clk_name       = "mcbsp_clk",
+        },
+        {
+                .virt_base      = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
+                .dma_rx_sync    = OMAP24XX_DMA_MCBSP2_RX,
+                .dma_tx_sync    = OMAP24XX_DMA_MCBSP2_TX,
+                .rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
+                .tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
+                .ops            = &omap2_mcbsp_ops,
+                .clk_name       = "mcbsp_clk",
+        },
+};
+#define OMAP24XX_MCBSP_PDATA_SZ         ARRAY_SIZE(omap24xx_mcbsp_pdata)
+#else
+#define omap24xx_mcbsp_pdata            NULL
+#define OMAP24XX_MCBSP_PDATA_SZ         0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
+        {
+                .virt_base      = IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
+                .dma_rx_sync    = OMAP24XX_DMA_MCBSP1_RX,
+                .dma_tx_sync    = OMAP24XX_DMA_MCBSP1_TX,
+                .rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
+                .tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
+                .ops            = &omap2_mcbsp_ops,
+                .clk_name       = "mcbsp_clk",
+        },
+        {
+                .virt_base      = IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
+                .dma_rx_sync    = OMAP24XX_DMA_MCBSP2_RX,
+                .dma_tx_sync    = OMAP24XX_DMA_MCBSP2_TX,
+                .rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
+                .tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
+                .ops            = &omap2_mcbsp_ops,
+                .clk_name       = "mcbsp_clk",
+        },
+};
+#define OMAP34XX_MCBSP_PDATA_SZ         ARRAY_SIZE(omap34xx_mcbsp_pdata)
+#else
+#define omap34xx_mcbsp_pdata            NULL
+#define OMAP34XX_MCBSP_PDATA_SZ         0
+#endif
+
+int __init omap2_mcbsp_init(void)
+{
+        int i;
+
+        for (i = 0; i < omap_mcbsp_clks_size; i++) {
+                /* Once we call clk_get inside init, we do not register it */
+                omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
+                clk_register(&omap_mcbsp_clks[i].clk);
+        }
+
+        if (cpu_is_omap24xx())
+                omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata,
+                                                OMAP24XX_MCBSP_PDATA_SZ);
+
+        if (cpu_is_omap34xx())
+                omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
+                                                OMAP34XX_MCBSP_PDATA_SZ);
+
+        return omap_mcbsp_init();
+}
+arch_initcall(omap2_mcbsp_init);
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 12479081881a..73cadb2c75cf 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -24,6 +24,7 @@
 
 #include <asm/io.h>
 
+#include <asm/arch/common.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
 
@@ -32,8 +33,8 @@
 #include "memory.h"
 #include "sdrc.h"
 
-unsigned long omap2_sdrc_base;
-unsigned long omap2_sms_base;
+void __iomem *omap2_sdrc_base;
+void __iomem *omap2_sms_base;
 
 static struct memory_timings mem_timings;
 static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
@@ -154,6 +155,12 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
         mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
 }
 
+void __init omap2_set_globals_memory(struct omap_globals *omap2_globals)
+{
+        omap2_sdrc_base = omap2_globals->sdrc;
+        omap2_sms_base = omap2_globals->sms;
+}
+
 /* turn on smart idle modes for SDRAM scheduler and controller */
 void __init omap2_init_memory(void)
 {
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 930770012a75..8f98b20f30a1 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -236,7 +236,7 @@ void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg)
         warn = (orig != reg);
         if (debug || warn)
                 printk(KERN_WARNING
-                        "MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
+                        "MUX: setup %s (0x%p): 0x%04x -> 0x%04x\n",
                         cfg->name, omap_ctrl_base_get() + cfg->mux_reg,
                         orig, reg);
 }
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index aad781dcf1b1..d6c9de82ca0c 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -57,13 +57,6 @@ void omap2_pm_idle(void)
                 return;
         }
 
-        /*
-         * Since an interrupt may set up a timer, we don't want to
-         * reprogram the hardware timer with interrupts enabled.
-         * Re-enable interrupts only after returning from idle.
-         */
-        timer_dyn_reprogram();
-
         omap2_sram_idle();
         local_fiq_enable();
         local_irq_enable();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index cacb34086e35..54c32f482131 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -32,6 +32,7 @@
 
 
 /* Chip-specific module offsets */
+#define OMAP24XX_GR_MOD                                 OCP_MOD
 #define OMAP24XX_DSP_MOD                                0x800
 
 #define OMAP2430_MDM_MOD                                0xc00
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index b12f423b8595..fd92a80f38f2 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -16,16 +16,21 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
+#include <asm/arch/common.h>
+#include <asm/arch/prcm.h>
 
+#include "clock.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 
-extern void omap2_clk_prepare_for_reboot(void);
+static void __iomem *prm_base;
+static void __iomem *cm_base;
 
 u32 omap_prcm_get_reset_sources(void)
 {
+        /* XXX This presumably needs modification for 34XX */
         return prm_read_mod_reg(WKUP_MOD, RM_RSTST) & 0x7f;
 }
 EXPORT_SYMBOL(omap_prcm_get_reset_sources);
@@ -33,11 +38,90 @@ EXPORT_SYMBOL(omap_prcm_get_reset_sources);
 /* Resets clock rates and reboots the system. Only called from system.h */
 void omap_prcm_arch_reset(char mode)
 {
-        u32 wkup;
+        s16 prcm_offs;
         omap2_clk_prepare_for_reboot();
 
-        if (cpu_is_omap24xx()) {
-                wkup = prm_read_mod_reg(WKUP_MOD, RM_RSTCTRL) | OMAP_RST_DPLL3;
-                prm_write_mod_reg(wkup, WKUP_MOD, RM_RSTCTRL);
-        }
+        if (cpu_is_omap24xx())
+                prcm_offs = WKUP_MOD;
+        else if (cpu_is_omap34xx())
+                prcm_offs = OMAP3430_GR_MOD;
+        else
+                WARN_ON(1);
+
+        prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, RM_RSTCTRL);
+}
+
+static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
+{
+        BUG_ON(!base);
+        return __raw_readl(base + module + reg);
+}
+
+static inline void __omap_prcm_write(u32 value, void __iomem *base,
+                                                s16 module, u16 reg)
+{
+        BUG_ON(!base);
+        __raw_writel(value, base + module + reg);
+}
+
+/* Read a register in a PRM module */
+u32 prm_read_mod_reg(s16 module, u16 idx)
+{
+        return __omap_prcm_read(prm_base, module, idx);
+}
+EXPORT_SYMBOL(prm_read_mod_reg);
+
+/* Write into a register in a PRM module */
+void prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+        __omap_prcm_write(val, prm_base, module, idx);
+}
+EXPORT_SYMBOL(prm_write_mod_reg);
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
+{
+        u32 v;
+
+        v = prm_read_mod_reg(module, idx);
+        v &= ~mask;
+        v |= bits;
+        prm_write_mod_reg(v, module, idx);
+
+        return v;
+}
+EXPORT_SYMBOL(prm_rmw_mod_reg_bits);
+
+/* Read a register in a CM module */
+u32 cm_read_mod_reg(s16 module, u16 idx)
+{
+        return __omap_prcm_read(cm_base, module, idx);
+}
+EXPORT_SYMBOL(cm_read_mod_reg);
+
+/* Write into a register in a CM module */
+void cm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+        __omap_prcm_write(val, cm_base, module, idx);
+}
+EXPORT_SYMBOL(cm_write_mod_reg);
+
+/* Read-modify-write a register in a CM module. Caller must lock */
+u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
+{
+        u32 v;
+
+        v = cm_read_mod_reg(module, idx);
+        v &= ~mask;
+        v |= bits;
+        cm_write_mod_reg(v, module, idx);
+
+        return v;
+}
+EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
+
+void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
+{
+        prm_base = omap2_globals->prm;
+        cm_base = omap2_globals->cm;
 }
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 618f8111658a..bbf41fc8e9a9 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -38,13 +38,29 @@
  *
  */
 
+/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
+#define OMAP24XX_PRCM_VOLTCTRL_OFFSET           0x0050
+#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET        0x0080
+
+/* 242x GR_MOD registers, use these only for assembly code */
+#define OMAP242X_PRCM_VOLTCTRL          OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,   \
+                                                OMAP24XX_PRCM_VOLTCTRL_OFFSET)
+#define OMAP242X_PRCM_CLKCFG_CTRL       OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,   \
+                                                OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
+
+/* 243x GR_MOD registers, use these only for assembly code */
+#define OMAP243X_PRCM_VOLTCTRL          OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,   \
+                                                OMAP24XX_PRCM_VOLTCTRL_OFFSET)
+#define OMAP243X_PRCM_CLKCFG_CTRL       OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,   \
+                                                OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
+
+/* These will disappear */
 #define OMAP24XX_PRCM_REVISION          OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
 #define OMAP24XX_PRCM_SYSCONFIG         OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
 
 #define OMAP24XX_PRCM_IRQSTATUS_MPU     OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
 #define OMAP24XX_PRCM_IRQENABLE_MPU     OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
 
-#define OMAP24XX_PRCM_VOLTCTRL          OMAP_PRM_REGADDR(OCP_MOD, 0x0050)
 #define OMAP24XX_PRCM_VOLTST            OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
 #define OMAP24XX_PRCM_CLKSRC_CTRL       OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
 #define OMAP24XX_PRCM_CLKOUT_CTRL       OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
@@ -150,15 +166,19 @@
 #ifndef __ASSEMBLER__
 
 /* Power/reset management domain register get/set */
+extern u32 prm_read_mod_reg(s16 module, u16 idx);
+extern void prm_write_mod_reg(u32 val, s16 module, u16 idx);
+extern u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
 
-static inline void prm_write_mod_reg(u32 val, s16 module, s16 idx)
+/* Read-modify-write bits in a PRM register (by domain) */
+static inline u32 prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
-        __raw_writel(val, OMAP_PRM_REGADDR(module, idx));
+        return prm_rmw_mod_reg_bits(bits, bits, module, idx);
 }
 
-static inline u32 prm_read_mod_reg(s16 module, s16 idx)
+static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
-        return __raw_readl(OMAP_PRM_REGADDR(module, idx));
+        return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
 }
 
 #endif
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index d7f23bc9550a..1b1fe4f6e030 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -18,13 +18,11 @@
 #include <asm/arch/sdrc.h>
 
 #ifndef __ASSEMBLER__
-extern unsigned long omap2_sdrc_base;
-extern unsigned long omap2_sms_base;
+extern void __iomem *omap2_sdrc_base;
+extern void __iomem *omap2_sms_base;
 
-#define OMAP_SDRC_REGADDR(reg)                                          \
-                (void __iomem *)IO_ADDRESS(omap2_sdrc_base + (reg))
-#define OMAP_SMS_REGADDR(reg)                                           \
-                (void __iomem *)IO_ADDRESS(omap2_sms_base + (reg))
+#define OMAP_SDRC_REGADDR(reg)                  (omap2_sdrc_base + (reg))
+#define OMAP_SMS_REGADDR(reg)                   (omap2_sms_base + (reg))
 
 /* SDRC global register get/set */
 
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram242x.S
index 4a9e49140716..4c274510f3e9 100644
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap2/sram-fn.S
+ * linux/arch/arm/mach-omap2/sram242x.S
  *
  * Omap2 specific functions that need to be run in internal SRAM
  *
@@ -27,22 +27,20 @@
 #include <asm/arch/io.h>
 #include <asm/hardware.h>
 
-#include "sdrc.h"
 #include "prm.h"
 #include "cm.h"
-
-#define TIMER_32KSYNCT_CR_V     IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+#include "sdrc.h"
 
         .text
 
-ENTRY(sram_ddr_init)
+ENTRY(omap242x_sram_ddr_init)
         stmfd   sp!, {r0 - r12, lr}     @ save registers on stack
 
         mov     r12, r2                 @ capture CS1 vs CS0
         mov     r8, r3                  @ capture force parameter
 
         /* frequency shift down */
-        ldr     r2, cm_clksel2_pll      @ get address of dpllout reg
+        ldr     r2, omap242x_sdi_cm_clksel2_pll @ get address of dpllout reg
         mov     r3, #0x1                @ value for 1x operation
         str     r3, [r2]                @ go to L1-freq operation
 
@@ -51,7 +49,7 @@ ENTRY(sram_ddr_init)
         bl voltage_shift                @ go drop voltage
 
         /* dll lock mode */
-        ldr     r11, sdrc_dlla_ctrl     @ addr of dlla ctrl
+        ldr     r11, omap242x_sdi_sdrc_dlla_ctrl        @ addr of dlla ctrl
         ldr     r10, [r11]              @ get current val
         cmp     r12, #0x1               @ cs1 base (2422 es2.05/1)
         addeq   r11, r11, #0x8          @ if cs1 base, move to DLLB
@@ -102,7 +100,7 @@ i_dll_delay:
          * wait for it to finish, use 32k sync counter, 1tick=31uS.
          */
 voltage_shift:
-        ldr     r4, prcm_voltctrl       @ get addr of volt ctrl.
+        ldr     r4, omap242x_sdi_prcm_voltctrl  @ get addr of volt ctrl.
         ldr     r5, [r4]                @ get value.
         ldr     r6, prcm_mask_val       @ get value of mask
         and     r5, r5, r6              @ apply mask to clear bits
@@ -112,7 +110,7 @@ voltage_shift:
         orr     r5, r5, r3              @ build value for force
         str     r5, [r4]                @ Force transition to L1
 
-        ldr     r3, timer_32ksynct_cr   @ get addr of counter
+        ldr     r3, omap242x_sdi_timer_32ksynct_cr      @ get addr of counter
         ldr     r5, [r3]                @ get value
         add     r5, r5, #0x3            @ give it at most 93uS
 volt_delay:
@@ -121,32 +119,31 @@ volt_delay:
         bhi     volt_delay              @ not yet->branch
         mov     pc, lr                  @ back to caller.
 
-/* relative load constants */
-cm_clksel2_pll:
+omap242x_sdi_cm_clksel2_pll:
         .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-sdrc_dlla_ctrl:
+omap242x_sdi_sdrc_dlla_ctrl:
         .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-prcm_voltctrl:
-        .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
+omap242x_sdi_prcm_voltctrl:
+        .word OMAP242X_PRCM_VOLTCTRL
 prcm_mask_val:
         .word 0xFFFF3FFC
-timer_32ksynct_cr:
-        .word TIMER_32KSYNCT_CR_V
-ENTRY(sram_ddr_init_sz)
-        .word   . - sram_ddr_init
+omap242x_sdi_timer_32ksynct_cr:
+        .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ENTRY(omap242x_sram_ddr_init_sz)
+        .word   . - omap242x_sram_ddr_init
 
 /*
  * Reprograms memory timings.
  * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
  * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
  */
-ENTRY(sram_reprogram_sdrc)
+ENTRY(omap242x_sram_reprogram_sdrc)
         stmfd   sp!, {r0 - r10, lr}     @ save registers on stack
         mov     r3, #0x0                @ clear for mrc call
         mcr     p15, 0, r3, c7, c10, 4  @ memory barrier, finish ARM SDR/DDR
         nop
         nop
-        ldr     r6, ddr_sdrc_rfr_ctrl   @ get addr of refresh reg
+        ldr     r6, omap242x_srs_sdrc_rfr_ctrl  @ get addr of refresh reg
         ldr     r5, [r6]                @ get value
         mov     r5, r5, lsr #8          @ isolate rfr field and drop burst
 
@@ -160,7 +157,7 @@ ENTRY(sram_reprogram_sdrc)
         movne   r5, r5, lsl #1          @ mult by 2 if to full
         mov     r5, r5, lsl #8          @ put rfr field back into place
         add     r5, r5, #0x1            @ turn on burst of 1
-        ldr     r4, ddr_cm_clksel2_pll  @ get address of out reg
+        ldr     r4, omap242x_srs_cm_clksel2_pll @ get address of out reg
         ldr     r3, [r4]                @ get curr value
         orr     r3, r3, #0x3
         bic     r3, r3, #0x3            @ clear lower bits
@@ -181,7 +178,7 @@ ENTRY(sram_reprogram_sdrc)
         bne     freq_out                @ leave if SDR, no DLL function
 
         /* With DDR, we need to take care of the DLL for the frequency change */
-        ldr     r2, ddr_sdrc_dlla_ctrl  @ addr of dlla ctrl
+        ldr     r2, omap242x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
         str     r1, [r2]                @ write out new SDRC_DLLA_CTRL
         add     r2, r2, #0x8            @ addr to SDRC_DLLB_CTRL
         str     r1, [r2]                @ commit to SDRC_DLLB_CTRL
@@ -197,7 +194,7 @@ freq_out:
      *  wait for it to finish, use 32k sync counter, 1tick=31uS.
      */
 voltage_shift_c:
-        ldr     r10, ddr_prcm_voltctrl  @ get addr of volt ctrl
+        ldr     r10, omap242x_srs_prcm_voltctrl @ get addr of volt ctrl
         ldr     r8, [r10]               @ get value
         ldr     r7, ddr_prcm_mask_val   @ get value of mask
         and     r8, r8, r7              @ apply mask to clear bits
@@ -207,7 +204,7 @@ voltage_shift_c:
         orr     r8, r8, r7              @ build value for force
         str     r8, [r10]               @ Force transition to L1
 
-        ldr     r10, ddr_timer_32ksynct @ get addr of counter
+        ldr     r10, omap242x_srs_timer_32ksynct        @ get addr of counter
         ldr     r8, [r10]               @ get value
         add     r8, r8, #0x2            @ give it at most 62uS (min 31+)
 volt_delay_c:
@@ -216,39 +213,39 @@ volt_delay_c:
         bhi     volt_delay_c            @ not yet->branch
         mov     pc, lr                  @ back to caller
 
-ddr_cm_clksel2_pll:
+omap242x_srs_cm_clksel2_pll:
         .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-ddr_sdrc_dlla_ctrl:
+omap242x_srs_sdrc_dlla_ctrl:
         .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-ddr_sdrc_rfr_ctrl:
+omap242x_srs_sdrc_rfr_ctrl:
         .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-ddr_prcm_voltctrl:
-        .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
+omap242x_srs_prcm_voltctrl:
+        .word OMAP242X_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
         .word 0xFFFF3FFC
-ddr_timer_32ksynct:
-        .word TIMER_32KSYNCT_CR_V
+omap242x_srs_timer_32ksynct:
+        .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
 
-ENTRY(sram_reprogram_sdrc_sz)
-        .word   . - sram_reprogram_sdrc
+ENTRY(omap242x_sram_reprogram_sdrc_sz)
+        .word   . - omap242x_sram_reprogram_sdrc
 
 /*
  * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
  */
-ENTRY(sram_set_prcm)
+ENTRY(omap242x_sram_set_prcm)
         stmfd   sp!, {r0-r12, lr}       @ regs to stack
         adr     r4, pbegin              @ addr of preload start
         adr     r8, pend                @ addr of preload end
         mcrr    p15, 1, r8, r4, c12     @ preload into icache
 pbegin:
         /* move into fast relock bypass */
-        ldr     r8, pll_ctl             @ get addr
+        ldr     r8, omap242x_ssp_pll_ctl        @ get addr
         ldr     r5, [r8]                @ get val
         mvn     r6, #0x3                @ clear mask
         and     r5, r5, r6              @ clear field
         orr     r7, r5, #0x2            @ fast relock val
         str     r7, [r8]                @ go to fast relock
-        ldr     r4, pll_stat            @ addr of stat
+        ldr     r4, omap242x_ssp_pll_stat       @ addr of stat
 block:
         /* wait for bypass */
         ldr     r8, [r4]                @ stat value
@@ -257,10 +254,10 @@ block:
         bne     block                   @ loop if not
 
         /* set new dpll dividers _after_ in bypass */
-        ldr     r4, pll_div             @ get addr
+        ldr     r4, omap242x_ssp_pll_div        @ get addr
         str     r0, [r4]                @ set dpll ctrl val
 
-        ldr     r4, set_config          @ get addr
+        ldr     r4, omap242x_ssp_set_config     @ get addr
         mov     r8, #1                  @ valid cfg msk
         str     r8, [r4]                @ make dividers take
 
@@ -274,8 +271,8 @@ wait_a_bit:
         beq     pend                    @ jump over dpll relock
 
         /* relock DPLL with new vals */
-        ldr     r5, pll_stat            @ get addr
-        ldr     r4, pll_ctl             @ get addr
+        ldr     r5, omap242x_ssp_pll_stat       @ get addr
+        ldr     r4, omap242x_ssp_pll_ctl        @ get addr
         orr     r8, r7, #0x3            @ val for lock dpll
         str     r8, [r4]                @ set val
         mov     r0, #1000               @ dead spin a bit
@@ -289,9 +286,9 @@ wait_lock:
         bne     wait_lock               @ wait if not
 pend:
         /* update memory timings & briefly lock dll */
-        ldr     r4, sdrc_rfr            @ get addr
+        ldr     r4, omap242x_ssp_sdrc_rfr       @ get addr
         str     r1, [r4]                @ update refresh timing
-        ldr     r11, dlla_ctrl          @ get addr of DLLA ctrl
+        ldr     r11, omap242x_ssp_dlla_ctrl     @ get addr of DLLA ctrl
         ldr     r10, [r11]              @ get current val
         mvn     r9, #0x4                @ mask to get clear bit2
         and     r10, r10, r9            @ clear bit2 for lock mode
@@ -307,18 +304,18 @@ wait_dll_lock:
         nop
         ldmfd   sp!, {r0-r12, pc}       @ restore regs and return
 
-set_config:
-        .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x80)
-pll_ctl:
-        .word OMAP2420_CM_REGADDR(PLL_MOD, CM_FCLKEN1)
-pll_stat:
-        .word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST1)
-pll_div:
-        .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL)
-sdrc_rfr:
+omap242x_ssp_set_config:
+        .word OMAP242X_PRCM_CLKCFG_CTRL
+omap242x_ssp_pll_ctl:
+        .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
+omap242x_ssp_pll_stat:
+        .word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST)
+omap242x_ssp_pll_div:
+        .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap242x_ssp_sdrc_rfr:
         .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-dlla_ctrl:
+omap242x_ssp_dlla_ctrl:
         .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
-ENTRY(sram_set_prcm_sz)
-        .word   . - sram_set_prcm
+ENTRY(omap242x_sram_set_prcm_sz)
+        .word   . - omap242x_sram_set_prcm
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
new file mode 100644
index 000000000000..a3fa48dc08cd
--- /dev/null
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -0,0 +1,321 @@
+/*
+ * linux/arch/arm/mach-omap2/sram243x.S
+ *
+ * Omap2 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/arch/io.h>
+#include <asm/hardware.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "sdrc.h"
+
+        .text
+
+ENTRY(omap243x_sram_ddr_init)
+        stmfd   sp!, {r0 - r12, lr}     @ save registers on stack
+
+        mov     r12, r2                 @ capture CS1 vs CS0
+        mov     r8, r3                  @ capture force parameter
+
+        /* frequency shift down */
+        ldr     r2, omap243x_sdi_cm_clksel2_pll @ get address of dpllout reg
+        mov     r3, #0x1                @ value for 1x operation
+        str     r3, [r2]                @ go to L1-freq operation
+
+        /* voltage shift down */
+        mov r9, #0x1                    @ set up for L1 voltage call
+        bl voltage_shift                @ go drop voltage
+
+        /* dll lock mode */
+        ldr     r11, omap243x_sdi_sdrc_dlla_ctrl        @ addr of dlla ctrl
+        ldr     r10, [r11]              @ get current val
+        cmp     r12, #0x1               @ cs1 base (2422 es2.05/1)
+        addeq   r11, r11, #0x8          @ if cs1 base, move to DLLB
+        mvn     r9, #0x4                @ mask to get clear bit2
+        and     r10, r10, r9            @ clear bit2 for lock mode.
+        orr     r10, r10, #0x8          @ make sure DLL on (es2 bit pos)
+        orr     r10, r10, #0x2          @ 90 degree phase for all below 133Mhz
+        str     r10, [r11]              @ commit to DLLA_CTRL
+        bl      i_dll_wait              @ wait for dll to lock
+
+        /* get dll value */
+        add     r11, r11, #0x4          @ get addr of status reg
+        ldr     r10, [r11]              @ get locked value
+
+        /* voltage shift up */
+        mov r9, #0x0                    @ shift back to L0-voltage
+        bl voltage_shift                @ go raise voltage
+
+        /* frequency shift up */
+        mov     r3, #0x2                @ value for 2x operation
+        str     r3, [r2]                @ go to L0-freq operation
+
+        /* reset entry mode for dllctrl */
+        sub     r11, r11, #0x4          @ move from status to ctrl
+        cmp     r12, #0x1               @ normalize if cs1 based
+        subeq   r11, r11, #0x8          @ possibly back to DLLA
+        cmp     r8, #0x1                @ if forced unlock exit
+        orreq   r1, r1, #0x4            @ make sure exit with unlocked value
+        str     r1, [r11]               @ restore DLLA_CTRL high value
+        add     r11, r11, #0x8          @ move to DLLB_CTRL addr
+        str     r1, [r11]               @ set value DLLB_CTRL
+        bl      i_dll_wait              @ wait for possible lock
+
+        /* set up for return, DDR should be good */
+        str r10, [r0]                   @ write dll_status and return counter
+        ldmfd   sp!, {r0 - r12, pc}     @ restore regs and return
+
+        /* ensure the DLL has relocked */
+i_dll_wait:
+        mov     r4, #0x800              @ delay DLL relock, min 0x400 L3 clocks
+i_dll_delay:
+        subs    r4, r4, #0x1
+        bne     i_dll_delay
+        mov     pc, lr
+
+        /*
+         * shift up or down voltage, use R9 as input to tell level.
+         * wait for it to finish, use 32k sync counter, 1tick=31uS.
+         */
+voltage_shift:
+        ldr     r4, omap243x_sdi_prcm_voltctrl  @ get addr of volt ctrl.
+        ldr     r5, [r4]                @ get value.
+        ldr     r6, prcm_mask_val       @ get value of mask
+        and     r5, r5, r6              @ apply mask to clear bits
+        orr     r5, r5, r9              @ bulld value for L0/L1-volt operation.
+        str     r5, [r4]                @ set up for change.
+        mov     r3, #0x4000             @ get val for force
+        orr     r5, r5, r3              @ build value for force
+        str     r5, [r4]                @ Force transition to L1
+
+        ldr     r3, omap243x_sdi_timer_32ksynct_cr      @ get addr of counter
+        ldr     r5, [r3]                @ get value
+        add     r5, r5, #0x3            @ give it at most 93uS
+volt_delay:
+        ldr     r7, [r3]                @ get timer value
+        cmp     r5, r7                  @ time up?
+        bhi     volt_delay              @ not yet->branch
+        mov     pc, lr                  @ back to caller.
+
+omap243x_sdi_cm_clksel2_pll:
+        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
+omap243x_sdi_sdrc_dlla_ctrl:
+        .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+omap243x_sdi_prcm_voltctrl:
+        .word OMAP243X_PRCM_VOLTCTRL
+prcm_mask_val:
+        .word 0xFFFF3FFC
+omap243x_sdi_timer_32ksynct_cr:
+        .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ENTRY(omap243x_sram_ddr_init_sz)
+        .word   . - omap243x_sram_ddr_init
+
+/*
+ * Reprograms memory timings.
+ * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
+ * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
+ */
+ENTRY(omap243x_sram_reprogram_sdrc)
+        stmfd   sp!, {r0 - r10, lr}     @ save registers on stack
+        mov     r3, #0x0                @ clear for mrc call
+        mcr     p15, 0, r3, c7, c10, 4  @ memory barrier, finish ARM SDR/DDR
+        nop
+        nop
+        ldr     r6, omap243x_srs_sdrc_rfr_ctrl  @ get addr of refresh reg
+        ldr     r5, [r6]                @ get value
+        mov     r5, r5, lsr #8          @ isolate rfr field and drop burst
+
+        cmp     r0, #0x1                @ going to half speed?
+        movne   r9, #0x0                @ if up set flag up for pre up, hi volt
+
+        blne    voltage_shift_c         @ adjust voltage
+
+        cmp     r0, #0x1                @ going to half speed (post branch link)
+        moveq   r5, r5, lsr #1          @ divide by 2 if to half
+        movne   r5, r5, lsl #1          @ mult by 2 if to full
+        mov     r5, r5, lsl #8          @ put rfr field back into place
+        add     r5, r5, #0x1            @ turn on burst of 1
+        ldr     r4, omap243x_srs_cm_clksel2_pll @ get address of out reg
+        ldr     r3, [r4]                @ get curr value
+        orr     r3, r3, #0x3
+        bic     r3, r3, #0x3            @ clear lower bits
+        orr     r3, r3, r0              @ new state value
+        str     r3, [r4]                @ set new state (pll/x, x=1 or 2)
+        nop
+        nop
+
+        moveq   r9, #0x1                @ if speed down, post down, drop volt
+        bleq    voltage_shift_c
+
+        mcr     p15, 0, r3, c7, c10, 4  @ memory barrier
+        str     r5, [r6]                @ set new RFR_1 value
+        add     r6, r6, #0x30           @ get RFR_2 addr
+        str     r5, [r6]                @ set RFR_2
+        nop
+        cmp     r2, #0x1                @ (SDR or DDR) do we need to adjust DLL
+        bne     freq_out                @ leave if SDR, no DLL function
+
+        /* With DDR, we need to take care of the DLL for the frequency change */
+        ldr     r2, omap243x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
+        str     r1, [r2]                @ write out new SDRC_DLLA_CTRL
+        add     r2, r2, #0x8            @ addr to SDRC_DLLB_CTRL
+        str     r1, [r2]                @ commit to SDRC_DLLB_CTRL
+        mov     r1, #0x2000             @ wait DLL relock, min 0x400 L3 clocks
+dll_wait:
+        subs    r1, r1, #0x1
+        bne     dll_wait
+freq_out:
+        ldmfd   sp!, {r0 - r10, pc}     @ restore regs and return
+
+    /*
+     * shift up or down voltage, use R9 as input to tell level.
+     *  wait for it to finish, use 32k sync counter, 1tick=31uS.
+     */
+voltage_shift_c:
+        ldr     r10, omap243x_srs_prcm_voltctrl @ get addr of volt ctrl
+        ldr     r8, [r10]               @ get value
+        ldr     r7, ddr_prcm_mask_val   @ get value of mask
+        and     r8, r8, r7              @ apply mask to clear bits
+        orr     r8, r8, r9              @ bulld value for L0/L1-volt operation.
+        str     r8, [r10]               @ set up for change.
+        mov     r7, #0x4000             @ get val for force
+        orr     r8, r8, r7              @ build value for force
+        str     r8, [r10]               @ Force transition to L1
+
+        ldr     r10, omap243x_srs_timer_32ksynct        @ get addr of counter
+        ldr     r8, [r10]               @ get value
+        add     r8, r8, #0x2            @ give it at most 62uS (min 31+)
+volt_delay_c:
+        ldr     r7, [r10]               @ get timer value
+        cmp     r8, r7                  @ time up?
+        bhi     volt_delay_c            @ not yet->branch
+        mov     pc, lr                  @ back to caller
+
+omap243x_srs_cm_clksel2_pll:
+        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
+omap243x_srs_sdrc_dlla_ctrl:
+        .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+omap243x_srs_sdrc_rfr_ctrl:
+        .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap243x_srs_prcm_voltctrl:
+        .word OMAP243X_PRCM_VOLTCTRL
+ddr_prcm_mask_val:
+        .word 0xFFFF3FFC
+omap243x_srs_timer_32ksynct:
+        .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+
+ENTRY(omap243x_sram_reprogram_sdrc_sz)
+        .word   . - omap243x_sram_reprogram_sdrc
+
+/*
+ * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
+ */
+ENTRY(omap243x_sram_set_prcm)
+        stmfd   sp!, {r0-r12, lr}       @ regs to stack
+        adr     r4, pbegin              @ addr of preload start
+        adr     r8, pend                @ addr of preload end
+        mcrr    p15, 1, r8, r4, c12     @ preload into icache
+pbegin:
+        /* move into fast relock bypass */
+        ldr     r8, omap243x_ssp_pll_ctl        @ get addr
+        ldr     r5, [r8]                @ get val
+        mvn     r6, #0x3                @ clear mask
+        and     r5, r5, r6              @ clear field
+        orr     r7, r5, #0x2            @ fast relock val
+        str     r7, [r8]                @ go to fast relock
+        ldr     r4, omap243x_ssp_pll_stat       @ addr of stat
+block:
+        /* wait for bypass */
+        ldr     r8, [r4]                @ stat value
+        and     r8, r8, #0x3            @ mask for stat
+        cmp     r8, #0x1                @ there yet
+        bne     block                   @ loop if not
+
+        /* set new dpll dividers _after_ in bypass */
+        ldr     r4, omap243x_ssp_pll_div        @ get addr
+        str     r0, [r4]                @ set dpll ctrl val
+
+        ldr     r4, omap243x_ssp_set_config     @ get addr
+        mov     r8, #1                  @ valid cfg msk
+        str     r8, [r4]                @ make dividers take
+
+        mov     r4, #100                @ dead spin a bit
+wait_a_bit:
+        subs    r4, r4, #1              @ dec loop
+        bne     wait_a_bit              @ delay done?
+
+        /* check if staying in bypass */
+        cmp     r2, #0x1                @ stay in bypass?
+        beq     pend                    @ jump over dpll relock
+
+        /* relock DPLL with new vals */
+        ldr     r5, omap243x_ssp_pll_stat       @ get addr
+        ldr     r4, omap243x_ssp_pll_ctl        @ get addr
+        orr     r8, r7, #0x3            @ val for lock dpll
+        str     r8, [r4]                @ set val
+        mov     r0, #1000               @ dead spin a bit
+wait_more:
+        subs    r0, r0, #1              @ dec loop
+        bne     wait_more               @ delay done?
+wait_lock:
+        ldr     r8, [r5]                @ get lock val
+        and     r8, r8, #3              @ isolate field
+        cmp     r8, #2                  @ locked?
+        bne     wait_lock               @ wait if not
+pend:
+        /* update memory timings & briefly lock dll */
+        ldr     r4, omap243x_ssp_sdrc_rfr       @ get addr
+        str     r1, [r4]                @ update refresh timing
+        ldr     r11, omap243x_ssp_dlla_ctrl     @ get addr of DLLA ctrl
+        ldr     r10, [r11]              @ get current val
+        mvn     r9, #0x4                @ mask to get clear bit2
+        and     r10, r10, r9            @ clear bit2 for lock mode
+        orr     r10, r10, #0x8          @ make sure DLL on (es2 bit pos)
+        str     r10, [r11]              @ commit to DLLA_CTRL
+        add     r11, r11, #0x8          @ move to dllb
+        str     r10, [r11]              @ hit DLLB also
+
+        mov     r4, #0x800              @ relock time (min 0x400 L3 clocks)
+wait_dll_lock:
+        subs    r4, r4, #0x1
+        bne     wait_dll_lock
+        nop
+        ldmfd   sp!, {r0-r12, pc}       @ restore regs and return
+
+omap243x_ssp_set_config:
+        .word OMAP243X_PRCM_CLKCFG_CTRL
+omap243x_ssp_pll_ctl:
+        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
+omap243x_ssp_pll_stat:
+        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_IDLEST)
+omap243x_ssp_pll_div:
+        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap243x_ssp_sdrc_rfr:
+        .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap243x_ssp_dlla_ctrl:
+        .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+
+ENTRY(omap243x_sram_set_prcm_sz)
+        .word   . - omap243x_sram_set_prcm
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 78d05f203fff..557603f99313 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -59,8 +59,7 @@ static struct irqaction omap2_gp_timer_irq = {
 static int omap2_gp_timer_set_next_event(unsigned long cycles,
                                          struct clock_event_device *evt)
 {
-        omap_dm_timer_set_load(gptimer, 0, 0xffffffff - cycles);
-        omap_dm_timer_start(gptimer);
+        omap_dm_timer_set_load_start(gptimer, 0, 0xffffffff - cycles);
 
         return 0;
 }
@@ -77,8 +76,7 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
                 period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
                 period -= 1;
 
-                omap_dm_timer_set_load(gptimer, 1, 0xffffffff - period);
-                omap_dm_timer_start(gptimer);
+                omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
                 break;
         case CLOCK_EVT_MODE_ONESHOT:
                 break;
@@ -172,8 +170,7 @@ static void __init omap2_gp_clocksource_init(void)
         tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt));
         tick_period = (tick_rate / HZ) - 1;
 
-        omap_dm_timer_set_load(gpt, 1, 0);
-        omap_dm_timer_start(gpt);
+        omap_dm_timer_set_load_start(gpt, 1, 0);
 
         clocksource_gpt.mult =
                 clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift);
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 93debf336155..ddcd41b15d17 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -44,6 +44,54 @@ config MACH_LINKSTATION_PRO
           Buffalo Linkstation Pro/Live platform. Both v1 and
           v2 devices are supported.
 
+config MACH_TS409
+        bool "QNAP TS-409"
+        help
+          Say 'Y' here if you want your kernel to support the
+          QNAP TS-409 platform.
+
+config MACH_WRT350N_V2
+        bool "Linksys WRT350N v2"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Linksys WRT350N v2 platform.
+
+config MACH_TS78XX
+        bool "Technologic Systems TS-78xx"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Technologic Systems TS-78xx platform.
+
+config MACH_MV2120
+        bool "HP Media Vault mv2120"
+        help
+          Say 'Y' here if you want your kernel to support the
+          HP Media Vault mv2120 or mv5100.
+
+config MACH_MSS2
+        bool "Maxtor Shared Storage II"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Maxtor Shared Storage II platform.
+
+config MACH_WNR854T
+        bool "Netgear WNR854T"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Netgear WNR854T platform.
+
+config MACH_RD88F5181L_GE
+        bool "Marvell Orion-VoIP GE Reference Design"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell Orion-VoIP GE (88F5181L) RD.
+
+config MACH_RD88F5181L_FXO
+        bool "Marvell Orion-VoIP FXO Reference Design"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell Orion-VoIP FXO (88F5181L) RD.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 9301bf55910b..fcc48a8864f3 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -1,7 +1,15 @@
-obj-y                           += common.o addr-map.o pci.o gpio.o irq.o
+obj-y                           += common.o addr-map.o pci.o gpio.o irq.o mpp.o
 obj-$(CONFIG_MACH_DB88F5281)    += db88f5281-setup.o
 obj-$(CONFIG_MACH_RD88F5182)    += rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)  += kurobox_pro-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
 obj-$(CONFIG_MACH_DNS323)       += dns323-setup.o
-obj-$(CONFIG_MACH_TS209)        += ts209-setup.o
+obj-$(CONFIG_MACH_TS209)        += ts209-setup.o tsx09-common.o
+obj-$(CONFIG_MACH_TS409)        += ts409-setup.o tsx09-common.o
+obj-$(CONFIG_MACH_WRT350N_V2)   += wrt350n-v2-setup.o
+obj-$(CONFIG_MACH_TS78XX)       += ts78xx-setup.o
+obj-$(CONFIG_MACH_MV2120)       += mv2120-setup.o
+obj-$(CONFIG_MACH_MSS2)         += mss2-setup.o
+obj-$(CONFIG_MACH_WNR854T)      += wnr854t-setup.o
+obj-$(CONFIG_MACH_RD88F5181L_GE)        += rd88f5181l-ge-setup.o
+obj-$(CONFIG_MACH_RD88F5181L_FXO)       += rd88f5181l-fxo-setup.o
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index e63fb05dc893..6f0dbda6c44c 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -70,6 +70,7 @@
 
 
 struct mbus_dram_target_info orion5x_mbus_dram_info;
+static int __initdata win_alloc_count;
 
 static int __init orion5x_cpu_win_can_remap(int win)
 {
@@ -87,16 +88,22 @@ static int __init orion5x_cpu_win_can_remap(int win)
 static void __init setup_cpu_win(int win, u32 base, u32 size,
                                  u8 target, u8 attr, int remap)
 {
-        orion5x_write(CPU_WIN_BASE(win), base & 0xffff0000);
-        orion5x_write(CPU_WIN_CTRL(win),
-                ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1);
+        if (win >= 8) {
+                printk(KERN_ERR "setup_cpu_win: trying to allocate "
+                                "window %d\n", win);
+                return;
+        }
+
+        writel(base & 0xffff0000, CPU_WIN_BASE(win));
+        writel(((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1,
+                CPU_WIN_CTRL(win));
 
         if (orion5x_cpu_win_can_remap(win)) {
                 if (remap < 0)
                         remap = base;
 
-                orion5x_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
-                orion5x_write(CPU_WIN_REMAP_HI(win), 0);
+                writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
+                writel(0, CPU_WIN_REMAP_HI(win));
         }
 }
 
@@ -109,11 +116,11 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
          * First, disable and clear windows.
          */
         for (i = 0; i < 8; i++) {
-                orion5x_write(CPU_WIN_BASE(i), 0);
-                orion5x_write(CPU_WIN_CTRL(i), 0);
+                writel(0, CPU_WIN_BASE(i));
+                writel(0, CPU_WIN_CTRL(i));
                 if (orion5x_cpu_win_can_remap(i)) {
-                        orion5x_write(CPU_WIN_REMAP_LO(i), 0);
-                        orion5x_write(CPU_WIN_REMAP_HI(i), 0);
+                        writel(0, CPU_WIN_REMAP_LO(i));
+                        writel(0, CPU_WIN_REMAP_HI(i));
                 }
         }
 
@@ -128,6 +135,7 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
                 TARGET_PCIE, ATTR_PCIE_MEM, -1);
         setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
                 TARGET_PCI, ATTR_PCI_MEM, -1);
+        win_alloc_count = 4;
 
         /*
          * Setup MBUS dram target info.
@@ -147,8 +155,8 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
                         w = &orion5x_mbus_dram_info.cs[cs++];
                         w->cs_index = i;
                         w->mbus_attr = 0xf & ~(1 << i);
-                        w->base = base & 0xff000000;
-                        w->size = (size | 0x00ffffff) + 1;
+                        w->base = base & 0xffff0000;
+                        w->size = (size | 0x0000ffff) + 1;
                 }
         }
         orion5x_mbus_dram_info.num_cs = cs;
@@ -156,25 +164,30 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
 
 void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
 {
-        setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
+        setup_cpu_win(win_alloc_count++, base, size,
+                      TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
 }
 
 void __init orion5x_setup_dev0_win(u32 base, u32 size)
 {
-        setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
+        setup_cpu_win(win_alloc_count++, base, size,
+                      TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
 }
 
 void __init orion5x_setup_dev1_win(u32 base, u32 size)
 {
-        setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
+        setup_cpu_win(win_alloc_count++, base, size,
+                      TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
 }
 
 void __init orion5x_setup_dev2_win(u32 base, u32 size)
 {
-        setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
+        setup_cpu_win(win_alloc_count++, base, size,
+                      TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
 }
 
 void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
 {
-        setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
+        setup_cpu_win(win_alloc_count++, base, size,
+                      TARGET_PCIE, ATTR_PCIE_WA, -1);
 }
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 4f13fd037f04..faf4e3211918 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -39,25 +39,22 @@ static struct map_desc orion5x_io_desc[] __initdata = {
                 .virtual        = ORION5X_REGS_VIRT_BASE,
                 .pfn            = __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
                 .length         = ORION5X_REGS_SIZE,
-                .type           = MT_DEVICE
-        },
-        {
+                .type           = MT_DEVICE,
+        }, {
                 .virtual        = ORION5X_PCIE_IO_VIRT_BASE,
                 .pfn            = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE),
                 .length         = ORION5X_PCIE_IO_SIZE,
-                .type           = MT_DEVICE
-        },
-        {
+                .type           = MT_DEVICE,
+        }, {
                 .virtual        = ORION5X_PCI_IO_VIRT_BASE,
                 .pfn            = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE),
                 .length         = ORION5X_PCI_IO_SIZE,
-                .type           = MT_DEVICE
-        },
-        {
+                .type           = MT_DEVICE,
+        }, {
                 .virtual        = ORION5X_PCIE_WA_VIRT_BASE,
                 .pfn            = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
                 .length         = ORION5X_PCIE_WA_SIZE,
-                .type           = MT_DEVICE
+                .type           = MT_DEVICE,
         },
 };
 
@@ -66,101 +63,32 @@ void __init orion5x_map_io(void)
         iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc));
 }
 
+
 /*****************************************************************************
- * UART
+ * EHCI
  ****************************************************************************/
-
-static struct resource orion5x_uart_resources[] = {
-        {
-                .start          = UART0_PHYS_BASE,
-                .end            = UART0_PHYS_BASE + 0xff,
-                .flags          = IORESOURCE_MEM,
-        },
-        {
-                .start          = IRQ_ORION5X_UART0,
-                .end            = IRQ_ORION5X_UART0,
-                .flags          = IORESOURCE_IRQ,
-        },
-        {
-                .start          = UART1_PHYS_BASE,
-                .end            = UART1_PHYS_BASE + 0xff,
-                .flags          = IORESOURCE_MEM,
-        },
-        {
-                .start          = IRQ_ORION5X_UART1,
-                .end            = IRQ_ORION5X_UART1,
-                .flags          = IORESOURCE_IRQ,
-        },
-};
-
-static struct plat_serial8250_port orion5x_uart_data[] = {
-        {
-                .mapbase        = UART0_PHYS_BASE,
-                .membase        = (char *)UART0_VIRT_BASE,
-                .irq            = IRQ_ORION5X_UART0,
-                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-                .iotype         = UPIO_MEM,
-                .regshift       = 2,
-                .uartclk        = ORION5X_TCLK,
-        },
-        {
-                .mapbase        = UART1_PHYS_BASE,
-                .membase        = (char *)UART1_VIRT_BASE,
-                .irq            = IRQ_ORION5X_UART1,
-                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-                .iotype         = UPIO_MEM,
-                .regshift       = 2,
-                .uartclk        = ORION5X_TCLK,
-        },
-        { },
+static struct orion_ehci_data orion5x_ehci_data = {
+        .dram           = &orion5x_mbus_dram_info,
 };
 
-static struct platform_device orion5x_uart = {
-        .name                   = "serial8250",
-        .id                     = PLAT8250_DEV_PLATFORM,
-        .dev                    = {
-                .platform_data  = orion5x_uart_data,
-        },
-        .resource               = orion5x_uart_resources,
-        .num_resources          = ARRAY_SIZE(orion5x_uart_resources),
-};
+static u64 ehci_dmamask = 0xffffffffUL;
 
-/*******************************************************************************
- * USB Controller - 2 interfaces
- ******************************************************************************/
 
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
 static struct resource orion5x_ehci0_resources[] = {
         {
                 .start  = ORION5X_USB0_PHYS_BASE,
                 .end    = ORION5X_USB0_PHYS_BASE + SZ_4K - 1,
                 .flags  = IORESOURCE_MEM,
-        },
-        {
+        }, {
                 .start  = IRQ_ORION5X_USB0_CTRL,
                 .end    = IRQ_ORION5X_USB0_CTRL,
                 .flags  = IORESOURCE_IRQ,
         },
 };
 
-static struct resource orion5x_ehci1_resources[] = {
-        {
-                .start  = ORION5X_USB1_PHYS_BASE,
-                .end    = ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        {
-                .start  = IRQ_ORION5X_USB1_CTRL,
-                .end    = IRQ_ORION5X_USB1_CTRL,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct orion_ehci_data orion5x_ehci_data = {
-        .dram           = &orion5x_mbus_dram_info,
-};
-
-static u64 ehci_dmamask = 0xffffffffUL;
-
 static struct platform_device orion5x_ehci0 = {
         .name           = "orion-ehci",
         .id             = 0,
@@ -173,6 +101,27 @@ static struct platform_device orion5x_ehci0 = {
         .num_resources  = ARRAY_SIZE(orion5x_ehci0_resources),
 };
 
+void __init orion5x_ehci0_init(void)
+{
+        platform_device_register(&orion5x_ehci0);
+}
+
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource orion5x_ehci1_resources[] = {
+        {
+                .start  = ORION5X_USB1_PHYS_BASE,
+                .end    = ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = IRQ_ORION5X_USB1_CTRL,
+                .end    = IRQ_ORION5X_USB1_CTRL,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
 static struct platform_device orion5x_ehci1 = {
         .name           = "orion-ehci",
         .id             = 1,
@@ -185,11 +134,15 @@ static struct platform_device orion5x_ehci1 = {
         .num_resources  = ARRAY_SIZE(orion5x_ehci1_resources),
 };
 
+void __init orion5x_ehci1_init(void)
+{
+        platform_device_register(&orion5x_ehci1);
+}
+
+
 /*****************************************************************************
- * Gigabit Ethernet port
- * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
+ * GigE
  ****************************************************************************/
-
 struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
         .dram           = &orion5x_mbus_dram_info,
         .t_clk          = ORION5X_TCLK,
@@ -219,7 +172,7 @@ static struct resource orion5x_eth_resources[] = {
                 .start  = IRQ_ORION5X_ETH_SUM,
                 .end    = IRQ_ORION5X_ETH_SUM,
                 .flags  = IORESOURCE_IRQ,
-        }
+        },
 };
 
 static struct platform_device orion5x_eth = {
@@ -238,11 +191,10 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
         platform_device_register(&orion5x_eth);
 }
 
+
 /*****************************************************************************
- * I2C controller
- * (The Orion and Discovery (MV643xx) families share the same I2C controller)
+ * I2C
  ****************************************************************************/
-
 static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
         .freq_m         = 8, /* assumes 166 MHz TCLK */
         .freq_n         = 3,
@@ -251,16 +203,15 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
 
 static struct resource orion5x_i2c_resources[] = {
         {
-                .name   = "i2c base",
-                .start  = I2C_PHYS_BASE,
-                .end    = I2C_PHYS_BASE + 0x20 -1,
-                .flags  = IORESOURCE_MEM,
-        },
-        {
-                .name   = "i2c irq",
-                .start  = IRQ_ORION5X_I2C,
-                .end    = IRQ_ORION5X_I2C,
-                .flags  = IORESOURCE_IRQ,
+                .name   = "i2c base",
+                .start  = I2C_PHYS_BASE,
+                .end    = I2C_PHYS_BASE + 0x1f,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .name   = "i2c irq",
+                .start  = IRQ_ORION5X_I2C,
+                .end    = IRQ_ORION5X_I2C,
+                .flags  = IORESOURCE_IRQ,
         },
 };
 
@@ -270,36 +221,41 @@ static struct platform_device orion5x_i2c = {
         .num_resources  = ARRAY_SIZE(orion5x_i2c_resources),
         .resource       = orion5x_i2c_resources,
         .dev            = {
-                .platform_data = &orion5x_i2c_pdata,
+                .platform_data  = &orion5x_i2c_pdata,
         },
 };
 
+void __init orion5x_i2c_init(void)
+{
+        platform_device_register(&orion5x_i2c);
+}
+
+
 /*****************************************************************************
- * Sata port
+ * SATA
  ****************************************************************************/
 static struct resource orion5x_sata_resources[] = {
-        {
-                .name   = "sata base",
-                .start  = ORION5X_SATA_PHYS_BASE,
-                .end    = ORION5X_SATA_PHYS_BASE + 0x5000 - 1,
-                .flags  = IORESOURCE_MEM,
-        },
         {
-                .name   = "sata irq",
-                .start  = IRQ_ORION5X_SATA,
-                .end    = IRQ_ORION5X_SATA,
-                .flags  = IORESOURCE_IRQ,
-        },
+                .name   = "sata base",
+                .start  = ORION5X_SATA_PHYS_BASE,
+                .end    = ORION5X_SATA_PHYS_BASE + 0x5000 - 1,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .name   = "sata irq",
+                .start  = IRQ_ORION5X_SATA,
+                .end    = IRQ_ORION5X_SATA,
+                .flags  = IORESOURCE_IRQ,
+        },
 };
 
 static struct platform_device orion5x_sata = {
-        .name           = "sata_mv",
-        .id             = 0,
+        .name           = "sata_mv",
+        .id             = 0,
         .dev            = {
                 .coherent_dma_mask      = 0xffffffff,
         },
-        .num_resources  = ARRAY_SIZE(orion5x_sata_resources),
-        .resource       = orion5x_sata_resources,
+        .num_resources  = ARRAY_SIZE(orion5x_sata_resources),
+        .resource       = orion5x_sata_resources,
 };
 
 void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
@@ -309,23 +265,111 @@ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
         platform_device_register(&orion5x_sata);
 }
 
+
 /*****************************************************************************
- * Time handling
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port orion5x_uart0_data[] = {
+        {
+                .mapbase        = UART0_PHYS_BASE,
+                .membase        = (char *)UART0_VIRT_BASE,
+                .irq            = IRQ_ORION5X_UART0,
+                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = ORION5X_TCLK,
+        }, {
+        },
+};
+
+static struct resource orion5x_uart0_resources[] = {
+        {
+                .start          = UART0_PHYS_BASE,
+                .end            = UART0_PHYS_BASE + 0xff,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = IRQ_ORION5X_UART0,
+                .end            = IRQ_ORION5X_UART0,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device orion5x_uart0 = {
+        .name                   = "serial8250",
+        .id                     = PLAT8250_DEV_PLATFORM,
+        .dev                    = {
+                .platform_data  = orion5x_uart0_data,
+        },
+        .resource               = orion5x_uart0_resources,
+        .num_resources          = ARRAY_SIZE(orion5x_uart0_resources),
+};
+
+void __init orion5x_uart0_init(void)
+{
+        platform_device_register(&orion5x_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
  ****************************************************************************/
+static struct plat_serial8250_port orion5x_uart1_data[] = {
+        {
+                .mapbase        = UART1_PHYS_BASE,
+                .membase        = (char *)UART1_VIRT_BASE,
+                .irq            = IRQ_ORION5X_UART1,
+                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = ORION5X_TCLK,
+        }, {
+        },
+};
+
+static struct resource orion5x_uart1_resources[] = {
+        {
+                .start          = UART1_PHYS_BASE,
+                .end            = UART1_PHYS_BASE + 0xff,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = IRQ_ORION5X_UART1,
+                .end            = IRQ_ORION5X_UART1,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device orion5x_uart1 = {
+        .name                   = "serial8250",
+        .id                     = PLAT8250_DEV_PLATFORM1,
+        .dev                    = {
+                .platform_data  = orion5x_uart1_data,
+        },
+        .resource               = orion5x_uart1_resources,
+        .num_resources          = ARRAY_SIZE(orion5x_uart1_resources),
+};
+
+void __init orion5x_uart1_init(void)
+{
+        platform_device_register(&orion5x_uart1);
+}
+
 
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
 static void orion5x_timer_init(void)
 {
         orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK);
 }
 
 struct sys_timer orion5x_timer = {
-        .init = orion5x_timer_init,
+        .init = orion5x_timer_init,
 };
 
+
 /*****************************************************************************
  * General
  ****************************************************************************/
-
 /*
  * Identify device ID and rev from PCIe configuration header space '0'.
  */
@@ -350,8 +394,10 @@ static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
         } else if (*dev == MV88F5181_DEV_ID) {
                 if (*rev == MV88F5181_REV_B1) {
                         *dev_name = "MV88F5181-Rev-B1";
+                } else if (*rev == MV88F5181L_REV_A1) {
+                        *dev_name = "MV88F5181L-Rev-A1";
                 } else {
-                        *dev_name = "MV88F5181-Rev-Unsupported";
+                        *dev_name = "MV88F5181(L)-Rev-Unsupported";
                 }
         } else {
                 *dev_name = "Device-Unknown";
@@ -370,15 +416,6 @@ void __init orion5x_init(void)
          * Setup Orion address map
          */
         orion5x_setup_cpu_mbus_bridge();
-
-        /*
-         * Register devices.
-         */
-        platform_device_register(&orion5x_uart);
-        platform_device_register(&orion5x_ehci0);
-        if (dev == MV88F5182_DEV_ID)
-                platform_device_register(&orion5x_ehci1);
-        platform_device_register(&orion5x_i2c);
 }
 
 /*
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index bd0f05de6e18..f72cf0e77544 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -1,10 +1,12 @@
 #ifndef __ARCH_ORION5X_COMMON_H
 #define __ARCH_ORION5X_COMMON_H
 
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
 /*
  * Basic Orion init functions used early by machine-setup.
  */
-
 void orion5x_map_io(void);
 void orion5x_init_irq(void);
 void orion5x_init(void);
@@ -23,15 +25,22 @@ void orion5x_setup_dev1_win(u32 base, u32 size);
 void orion5x_setup_dev2_win(u32 base, u32 size);
 void orion5x_setup_pcie_wa_win(u32 base, u32 size);
 
+void orion5x_ehci0_init(void);
+void orion5x_ehci1_init(void);
+void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
+void orion5x_i2c_init(void);
+void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
+void orion5x_uart0_init(void);
+void orion5x_uart1_init(void);
+
 /*
- * Shared code used internally by other Orion core functions.
- * (/mach-orion/pci.c)
+ * PCIe/PCI functions.
  */
-
-struct pci_sys_data;
 struct pci_bus;
+struct pci_sys_data;
 
 void orion5x_pcie_id(u32 *dev, u32 *rev);
+void orion5x_pci_set_cardbus_mode(void);
 int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
 struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
 int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
@@ -40,26 +49,9 @@ int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
  * Valid GPIO pins according to MPP setup, used by machine-setup.
  * (/mach-orion/gpio.c).
  */
-
-void orion5x_gpio_set_valid_pins(u32 pins);
+void orion5x_gpio_set_valid(unsigned pin, int valid);
 void gpio_display(void);        /* debug */
 
-/*
- * Pull in Orion Ethernet platform_data, used by machine-setup
- */
-
-struct mv643xx_eth_platform_data;
-
-void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-
-/*
- * Orion Sata platform_data, used by machine-setup
- */
-
-struct mv_sata_platform_data;
-
-void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
-
 struct machine_desc;
 struct meminfo;
 struct tag;
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 44c64342dacb..88405e74e5e3 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -27,6 +27,7 @@
 #include <asm/arch/orion5x.h>
 #include <asm/plat-orion/orion_nand.h>
 #include "common.h"
+#include "mpp.h"
 
 /*****************************************************************************
  * DB-88F5281 on board devices
@@ -86,7 +87,7 @@ static struct platform_device db88f5281_boot_flash = {
         .name           = "physmap-flash",
         .id             = 0,
         .dev            = {
-                .platform_data = &db88f5281_boot_flash_data,
+                .platform_data  = &db88f5281_boot_flash_data,
         },
         .num_resources  = 1,
         .resource       = &db88f5281_boot_flash_resource,
@@ -110,7 +111,7 @@ static struct platform_device db88f5281_nor_flash = {
         .name           = "physmap-flash",
         .id             = 1,
         .dev            = {
-                .platform_data = &db88f5281_nor_flash_data,
+                .platform_data  = &db88f5281_nor_flash_data,
         },
         .num_resources  = 1,
         .resource       = &db88f5281_nor_flash_resource,
@@ -125,18 +126,15 @@ static struct mtd_partition db88f5281_nand_parts[] = {
                 .name = "kernel",
                 .offset = 0,
                 .size = SZ_2M,
-        },
-        {
+        }, {
                 .name = "root",
                 .offset = SZ_2M,
                 .size = (SZ_16M - SZ_2M),
-        },
-        {
+        }, {
                 .name = "user",
                 .offset = SZ_16M,
                 .size = SZ_8M,
-        },
-        {
+        }, {
                 .name = "recovery",
                 .offset = (SZ_16M + SZ_8M),
                 .size = SZ_8M,
@@ -288,7 +286,6 @@ subsys_initcall(db88f5281_pci_init);
  ****************************************************************************/
 static struct mv643xx_eth_platform_data db88f5281_eth_data = {
         .phy_addr       = 8,
-        .force_phy_addr = 1,
 };
 
 /*****************************************************************************
@@ -301,11 +298,28 @@ static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
-
-static struct platform_device *db88f5281_devs[] __initdata = {
-        &db88f5281_boot_flash,
-        &db88f5281_nor_flash,
-        &db88f5281_nand_flash,
+static struct orion5x_mpp_mode db88f5281_mpp_modes[] __initdata = {
+        {  0, MPP_GPIO },               /* USB Over Current */
+        {  1, MPP_GPIO },               /* USB Vbat input */
+        {  2, MPP_PCI_ARB },            /* PCI_REQn[2] */
+        {  3, MPP_PCI_ARB },            /* PCI_GNTn[2] */
+        {  4, MPP_PCI_ARB },            /* PCI_REQn[3] */
+        {  5, MPP_PCI_ARB },            /* PCI_GNTn[3] */
+        {  6, MPP_GPIO },               /* JP0, CON17.2 */
+        {  7, MPP_GPIO },               /* JP1, CON17.1 */
+        {  8, MPP_GPIO },               /* JP2, CON11.2 */
+        {  9, MPP_GPIO },               /* JP3, CON11.3 */
+        { 10, MPP_GPIO },               /* RTC int */
+        { 11, MPP_GPIO },               /* Baud Rate Generator */
+        { 12, MPP_GPIO },               /* PCI int 1 */
+        { 13, MPP_GPIO },               /* PCI int 2 */
+        { 14, MPP_NAND },               /* NAND_REn[2] */
+        { 15, MPP_NAND },               /* NAND_WEn[2] */
+        { 16, MPP_UART },               /* UART1_RX */
+        { 17, MPP_UART },               /* UART1_TX */
+        { 18, MPP_UART },               /* UART1_CTSn */
+        { 19, MPP_UART },               /* UART1_RTSn */
+        { -1 },
 };
 
 static void __init db88f5281_init(void)
@@ -315,39 +329,31 @@ static void __init db88f5281_init(void)
          */
         orion5x_init();
 
+        orion5x_mpp_conf(db88f5281_mpp_modes);
+        writel(0, MPP_DEV_CTRL);                /* DEV_D[31:16] */
+
         /*
-         * Setup the CPU address decode windows for our on-board devices
+         * Configure peripherals.
          */
+        orion5x_ehci0_init();
+        orion5x_eth_init(&db88f5281_eth_data);
+        orion5x_i2c_init();
+        orion5x_uart0_init();
+        orion5x_uart1_init();
+
         orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
                                 DB88F5281_NOR_BOOT_SIZE);
+        platform_device_register(&db88f5281_boot_flash);
+
         orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
-        orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
-        orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
 
-        /*
-         * Setup Multiplexing Pins:
-         * MPP0: GPIO (USB Over Current)        MPP1: GPIO (USB Vbat input)
-         * MPP2: PCI_REQn[2]                    MPP3: PCI_GNTn[2]
-         * MPP4: PCI_REQn[3]                    MPP5: PCI_GNTn[3]
-         * MPP6: GPIO (JP0, CON17.2)            MPP7: GPIO (JP1, CON17.1)
-         * MPP8: GPIO (JP2, CON11.2)            MPP9: GPIO (JP3, CON11.3)
-         * MPP10: GPIO (RTC int)                MPP11: GPIO (Baud Rate Generator)
-         * MPP12: GPIO (PCI int 1)              MPP13: GPIO (PCI int 2)
-         * MPP14: NAND_REn[2]                   MPP15: NAND_WEn[2]
-         * MPP16: UART1_RX                      MPP17: UART1_TX
-         * MPP18: UART1_CTS                     MPP19: UART1_RTS
-         * MPP-DEV: DEV_D[16:31]
-         */
-        orion5x_write(MPP_0_7_CTRL, 0x00222203);
-        orion5x_write(MPP_8_15_CTRL, 0x44000000);
-        orion5x_write(MPP_16_19_CTRL, 0);
-        orion5x_write(MPP_DEV_CTRL, 0);
+        orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
+        platform_device_register(&db88f5281_nor_flash);
 
-        orion5x_gpio_set_valid_pins(0x00003fc3);
+        orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
+        platform_device_register(&db88f5281_nand_flash);
 
-        platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
         i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
-        orion5x_eth_init(&db88f5281_eth_data);
 }
 
 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 27ce967ab9e5..3791ca6f001a 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -27,6 +27,7 @@
 #include <asm/mach/pci.h>
 #include <asm/arch/orion5x.h>
 #include "common.h"
+#include "mpp.h"
 
 #define DNS323_GPIO_LED_RIGHT_AMBER     1
 #define DNS323_GPIO_LED_LEFT_AMBER      2
@@ -52,8 +53,6 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
         if (irq != -1)
                 return irq;
 
-        pr_err("%s: requested mapping for unknown device\n", __func__);
-
         return -1;
 }
 
@@ -81,7 +80,6 @@ subsys_initcall(dns323_pci_init);
 
 static struct mv643xx_eth_platform_data dns323_eth_data = {
         .phy_addr = 8,
-        .force_phy_addr = 1,
 };
 
 /****************************************************************************
@@ -119,7 +117,7 @@ static struct mtd_partition dns323_partitions[] = {
                 .name   = "u-boot",
                 .size   = 0x00030000,
                 .offset = 0x007d0000,
-        }
+        },
 };
 
 static struct physmap_flash_data dns323_nor_flash_data = {
@@ -137,7 +135,9 @@ static struct resource dns323_nor_flash_resource = {
 static struct platform_device dns323_nor_flash = {
         .name           = "physmap-flash",
         .id             = 0,
-        .dev            = { .platform_data = &dns323_nor_flash_data, },
+        .dev            = {
+                .platform_data  = &dns323_nor_flash_data,
+        },
         .resource       = &dns323_nor_flash_resource,
         .num_resources  = 1,
 };
@@ -170,7 +170,9 @@ static struct gpio_led_platform_data dns323_led_data = {
 static struct platform_device dns323_gpio_leds = {
         .name           = "leds-gpio",
         .id             = -1,
-        .dev            = { .platform_data = &dns323_led_data, },
+        .dev            = {
+                .platform_data  = &dns323_led_data,
+        },
 };
 
 /****************************************************************************
@@ -183,35 +185,53 @@ static struct gpio_keys_button dns323_buttons[] = {
                 .gpio           = DNS323_GPIO_KEY_RESET,
                 .desc           = "Reset Button",
                 .active_low     = 1,
-        },
-        {
+        }, {
                 .code           = KEY_POWER,
                 .gpio           = DNS323_GPIO_KEY_POWER,
                 .desc           = "Power Button",
                 .active_low     = 1,
-        }
+        },
 };
 
 static struct gpio_keys_platform_data dns323_button_data = {
         .buttons        = dns323_buttons,
-        .nbuttons       = ARRAY_SIZE(dns323_buttons),
+        .nbuttons       = ARRAY_SIZE(dns323_buttons),
 };
 
 static struct platform_device dns323_button_device = {
         .name           = "gpio-keys",
         .id             = -1,
         .num_resources  = 0,
-        .dev            = { .platform_data  = &dns323_button_data, },
+        .dev            = {
+                .platform_data  = &dns323_button_data,
+        },
 };
 
 /****************************************************************************
  * General Setup
  */
-
-static struct platform_device *dns323_plat_devices[] __initdata = {
-        &dns323_nor_flash,
-        &dns323_gpio_leds,
-        &dns323_button_device,
+static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
+        {  0, MPP_PCIE_RST_OUTn },
+        {  1, MPP_GPIO },               /* right amber LED (sata ch0) */
+        {  2, MPP_GPIO },               /* left amber LED (sata ch1) */
+        {  3, MPP_UNUSED },
+        {  4, MPP_GPIO },               /* power button LED */
+        {  5, MPP_GPIO },               /* power button LED */
+        {  6, MPP_GPIO },               /* GMT G751-2f overtemp */
+        {  7, MPP_GPIO },               /* M41T80 nIRQ/OUT/SQW */
+        {  8, MPP_GPIO },               /* triggers power off */
+        {  9, MPP_GPIO },               /* power button switch */
+        { 10, MPP_GPIO },               /* reset button switch */
+        { 11, MPP_UNUSED },
+        { 12, MPP_UNUSED },
+        { 13, MPP_UNUSED },
+        { 14, MPP_UNUSED },
+        { 15, MPP_UNUSED },
+        { 16, MPP_UNUSED },
+        { 17, MPP_UNUSED },
+        { 18, MPP_UNUSED },
+        { 19, MPP_UNUSED },
+        { -1 },
 };
 
 /*
@@ -225,17 +245,15 @@ static struct platform_device *dns323_plat_devices[] __initdata = {
 static struct i2c_board_info __initdata dns323_i2c_devices[] = {
         {
                 I2C_BOARD_INFO("g760a", 0x3e),
-        },
 #if 0
         /* this entry requires the new-style driver model lm75 driver,
          * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
-        {
+        }, {
                 I2C_BOARD_INFO("g751", 0x48),
-        },
 #endif
-        {
+        }, {
                 I2C_BOARD_INFO("m41t80", 0x68),
-        }
+        },
 };
 
 /* DNS-323 specific power off method */
@@ -250,62 +268,35 @@ static void __init dns323_init(void)
         /* Setup basic Orion functions. Need to be called early. */
         orion5x_init();
 
+        orion5x_mpp_conf(dns323_mpp_modes);
+        writel(0, MPP_DEV_CTRL);                /* DEV_D[31:16] */
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_eth_init(&dns323_eth_data);
+        orion5x_i2c_init();
+        orion5x_uart0_init();
+
         /* setup flash mapping
          * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
          */
         orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
+        platform_device_register(&dns323_nor_flash);
 
-        /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIe
-         *
-         * Open a special address decode windows for the PCIe WA.
-         */
-        orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
-                                ORION5X_PCIE_WA_SIZE);
-
-        /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */
-        orion5x_write(MPP_0_7_CTRL, 0);
-        orion5x_write(MPP_8_15_CTRL, 0);
-        orion5x_write(MPP_16_19_CTRL, 0);
-        orion5x_write(MPP_DEV_CTRL, 0);
-
-        /* Define used GPIO pins
-
-          GPIO Map:
-
-          |  0 |     | PEX_RST_OUT (not controlled by GPIO)
-          |  1 | Out | right amber LED (= sata ch0 LED)  (low-active)
-          |  2 | Out | left  amber LED (= sata ch1 LED)  (low-active)
-          |  3 | Out | //unknown//
-          |  4 | Out | power button LED (low-active, together with pin #5)
-          |  5 | Out | power button LED (low-active, together with pin #4)
-          |  6 | In  | GMT G751-2f overtemp. shutdown signal (low-active)
-          |  7 | In  | M41T80 nIRQ/OUT/SQW signal
-          |  8 | Out | triggers power off (high-active)
-          |  9 | In  | power button switch (low-active)
-          | 10 | In  | reset button switch (low-active)
-          | 11 | Out | //unknown//
-          | 12 | Out | //unknown//
-          | 13 | Out | //unknown//
-          | 14 | Out | //unknown//
-          | 15 | Out | //unknown//
-        */
-        orion5x_gpio_set_valid_pins(0x07f6);
-
-        /* register dns323 specific power-off method */
-        if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0)
-            || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0))
-                pr_err("DNS323: failed to setup power-off GPIO\n");
-
-        pm_power_off = dns323_power_off;
+        platform_device_register(&dns323_gpio_leds);
 
-        /* register flash and other platform devices */
-        platform_add_devices(dns323_plat_devices,
-                             ARRAY_SIZE(dns323_plat_devices));
+        platform_device_register(&dns323_button_device);
 
         i2c_register_board_info(0, dns323_i2c_devices,
                                 ARRAY_SIZE(dns323_i2c_devices));
 
-        orion5x_eth_init(&dns323_eth_data);
+        /* register dns323 specific power-off method */
+        if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+            gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+                pr_err("DNS323: failed to setup power-off GPIO\n");
+        pm_power_off = dns323_power_off;
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
index 8108c316c426..d09797990f41 100644
--- a/arch/arm/mach-orion5x/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -24,9 +24,12 @@ static DEFINE_SPINLOCK(gpio_lock);
 static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
 static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
 
-void __init orion5x_gpio_set_valid_pins(u32 pins)
+void __init orion5x_gpio_set_valid(unsigned pin, int valid)
 {
-        gpio_valid[0] = pins;
+        if (valid)
+                __set_bit(pin, gpio_valid);
+        else
+                __clear_bit(pin, gpio_valid);
 }
 
 /*
@@ -93,10 +96,10 @@ int gpio_get_value(unsigned pin)
 {
         int val, mask = 1 << pin;
 
-        if (orion5x_read(GPIO_IO_CONF) & mask)
-                val = orion5x_read(GPIO_DATA_IN) ^ orion5x_read(GPIO_IN_POL);
+        if (readl(GPIO_IO_CONF) & mask)
+                val = readl(GPIO_DATA_IN) ^ readl(GPIO_IN_POL);
         else
-                val = orion5x_read(GPIO_OUT);
+                val = readl(GPIO_OUT);
 
         return val & mask;
 }
@@ -188,39 +191,39 @@ void gpio_display(void)
                         printk("GPIO, free\n");
                 } else {
                         printk("GPIO, used by %s, ", gpio_label[i]);
-                        if (orion5x_read(GPIO_IO_CONF) & (1 << i)) {
+                        if (readl(GPIO_IO_CONF) & (1 << i)) {
                                 printk("input, active %s, level %s, edge %s\n",
-                                ((orion5x_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
-                                ((orion5x_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
-                                ((orion5x_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
+                                ((readl(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
+                                ((readl(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
+                                ((readl(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
                         } else {
-                                printk("output, val=%d\n", (orion5x_read(GPIO_OUT) >> i) & 1);
+                                printk("output, val=%d\n", (readl(GPIO_OUT) >> i) & 1);
                         }
                 }
         }
 
         printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n",
-                                MPP_0_7_CTRL, orion5x_read(MPP_0_7_CTRL));
+                                MPP_0_7_CTRL, readl(MPP_0_7_CTRL));
         printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n",
-                                MPP_8_15_CTRL, orion5x_read(MPP_8_15_CTRL));
+                                MPP_8_15_CTRL, readl(MPP_8_15_CTRL));
         printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n",
-                                MPP_16_19_CTRL, orion5x_read(MPP_16_19_CTRL));
+                                MPP_16_19_CTRL, readl(MPP_16_19_CTRL));
         printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n",
-                                MPP_DEV_CTRL, orion5x_read(MPP_DEV_CTRL));
+                                MPP_DEV_CTRL, readl(MPP_DEV_CTRL));
         printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n",
-                                GPIO_OUT, orion5x_read(GPIO_OUT));
+                                GPIO_OUT, readl(GPIO_OUT));
         printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n",
-                                GPIO_IO_CONF, orion5x_read(GPIO_IO_CONF));
+                                GPIO_IO_CONF, readl(GPIO_IO_CONF));
         printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n",
-                                GPIO_BLINK_EN, orion5x_read(GPIO_BLINK_EN));
+                                GPIO_BLINK_EN, readl(GPIO_BLINK_EN));
         printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n",
-                                GPIO_IN_POL, orion5x_read(GPIO_IN_POL));
+                                GPIO_IN_POL, readl(GPIO_IN_POL));
         printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n",
-                                GPIO_DATA_IN, orion5x_read(GPIO_DATA_IN));
+                                GPIO_DATA_IN, readl(GPIO_DATA_IN));
         printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n",
-                                GPIO_LEVEL_MASK, orion5x_read(GPIO_LEVEL_MASK));
+                                GPIO_LEVEL_MASK, readl(GPIO_LEVEL_MASK));
         printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n",
-                                GPIO_EDGE_CAUSE, orion5x_read(GPIO_EDGE_CAUSE));
+                                GPIO_EDGE_CAUSE, readl(GPIO_EDGE_CAUSE));
         printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n",
-                                GPIO_EDGE_MASK, orion5x_read(GPIO_EDGE_MASK));
+                                GPIO_EDGE_MASK, readl(GPIO_EDGE_MASK));
 }
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index dd21f38c5d37..e2a0084ab4a3 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -82,7 +82,7 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
         int pin = irq_to_gpio(irq);
         struct irq_desc *desc;
 
-        if ((orion5x_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
+        if ((readl(GPIO_IO_CONF) & (1 << pin)) == 0) {
                 printk(KERN_ERR "orion5x_gpio_set_irq_type failed "
                                 "(irq %d, pin %d).\n", irq, pin);
                 return -EINVAL;
@@ -117,7 +117,7 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
                 /*
                  * set initial polarity based on current input level
                  */
-                if ((orion5x_read(GPIO_IN_POL) ^ orion5x_read(GPIO_DATA_IN))
+                if ((readl(GPIO_IN_POL) ^ readl(GPIO_DATA_IN))
                     & (1 << pin))
                         orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
                 else
@@ -149,8 +149,8 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 
         BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31);
         offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8;
-        cause = (orion5x_read(GPIO_DATA_IN) & orion5x_read(GPIO_LEVEL_MASK)) |
-                (orion5x_read(GPIO_EDGE_CAUSE) & orion5x_read(GPIO_EDGE_MASK));
+        cause = (readl(GPIO_DATA_IN) & readl(GPIO_LEVEL_MASK)) |
+                (readl(GPIO_EDGE_CAUSE) & readl(GPIO_EDGE_MASK));
 
         for (pin = offs; pin < offs + 8; pin++) {
                 if (cause & (1 << pin)) {
@@ -158,9 +158,9 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
                         desc = irq_desc + irq;
                         if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
                                 /* Swap polarity (race with GPIO line) */
-                                u32 polarity = orion5x_read(GPIO_IN_POL);
+                                u32 polarity = readl(GPIO_IN_POL);
                                 polarity ^= 1 << pin;
-                                orion5x_write(GPIO_IN_POL, polarity);
+                                writel(polarity, GPIO_IN_POL);
                         }
                         desc_handle_irq(irq, desc);
                 }
@@ -175,9 +175,9 @@ static void __init orion5x_init_gpio_irq(void)
         /*
          * Mask and clear GPIO IRQ interrupts
          */
-        orion5x_write(GPIO_LEVEL_MASK, 0x0);
-        orion5x_write(GPIO_EDGE_MASK, 0x0);
-        orion5x_write(GPIO_EDGE_CAUSE, 0x0);
+        writel(0x0, GPIO_LEVEL_MASK);
+        writel(0x0, GPIO_EDGE_MASK);
+        writel(0x0, GPIO_EDGE_CAUSE);
 
         /*
          * Register chained level handlers for GPIO IRQs by default.
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index f5074b877b7f..84feac4a1fe2 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -13,10 +13,12 @@
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
+#include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/i2c.h>
+#include <linux/serial_reg.h>
 #include <linux/ata_platform.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
@@ -25,6 +27,7 @@
 #include <asm/arch/orion5x.h>
 #include <asm/plat-orion/orion_nand.h>
 #include "common.h"
+#include "mpp.h"
 
 /*****************************************************************************
  * KUROBOX-PRO Info
@@ -53,13 +56,11 @@ static struct mtd_partition kurobox_pro_nand_parts[] = {
                 .name   = "uImage",
                 .offset = 0,
                 .size   = SZ_4M,
-        },
-        {
+        }, {
                 .name   = "rootfs",
                 .offset = SZ_4M,
                 .size   = SZ_64M,
-        },
-        {
+        }, {
                 .name   = "extra",
                 .offset = SZ_4M + SZ_64M,
                 .size   = SZ_256M - (SZ_4M + SZ_64M),
@@ -132,8 +133,6 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
         /*
          * PCI isn't used on the Kuro
          */
-        printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
-
         return -1;
 }
 
@@ -161,7 +160,6 @@ subsys_initcall(kurobox_pro_pci_init);
 
 static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
         .phy_addr       = 8,
-        .force_phy_addr = 1,
 };
 
 /*****************************************************************************
@@ -175,12 +173,169 @@ static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
  * SATA
  ****************************************************************************/
 static struct mv_sata_platform_data kurobox_pro_sata_data = {
-        .n_ports        = 2,
+        .n_ports        = 2,
 };
 
 /*****************************************************************************
+ * Kurobox Pro specific power off method via UART1-attached microcontroller
+ ****************************************************************************/
+
+#define UART1_REG(x)    (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+static int kurobox_pro_miconread(unsigned char *buf, int count)
+{
+        int i;
+        int timeout;
+
+        for (i = 0; i < count; i++) {
+                timeout = 10;
+
+                while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
+                        if (--timeout == 0)
+                                break;
+                        udelay(1000);
+                }
+
+                if (timeout == 0)
+                        break;
+                buf[i] = readl(UART1_REG(RX));
+        }
+
+        /* return read bytes */
+        return i;
+}
+
+static int kurobox_pro_miconwrite(const unsigned char *buf, int count)
+{
+        int i = 0;
+
+        while (count--) {
+                while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
+                        barrier();
+                writel(buf[i++], UART1_REG(TX));
+        }
+
+        return 0;
+}
+
+static int kurobox_pro_miconsend(const unsigned char *data, int count)
+{
+        int i;
+        unsigned char checksum = 0;
+        unsigned char recv_buf[40];
+        unsigned char send_buf[40];
+        unsigned char correct_ack[3];
+        int retry = 2;
+
+        /* Generate checksum */
+        for (i = 0; i < count; i++)
+                checksum -=  data[i];
+
+        do {
+                /* Send data */
+                kurobox_pro_miconwrite(data, count);
+
+                /* send checksum */
+                kurobox_pro_miconwrite(&checksum, 1);
+
+                if (kurobox_pro_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
+                        printk(KERN_ERR ">%s: receive failed.\n", __func__);
+
+                        /* send preamble to clear the receive buffer */
+                        memset(&send_buf, 0xff, sizeof(send_buf));
+                        kurobox_pro_miconwrite(send_buf, sizeof(send_buf));
+
+                        /* make dummy reads */
+                        mdelay(100);
+                        kurobox_pro_miconread(recv_buf, sizeof(recv_buf));
+                } else {
+                        /* Generate expected ack */
+                        correct_ack[0] = 0x01;
+                        correct_ack[1] = data[1];
+                        correct_ack[2] = 0x00;
+
+                        /* checksum Check */
+                        if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
+                             recv_buf[3]) & 0xFF) {
+                                printk(KERN_ERR ">%s: Checksum Error : "
+                                        "Received data[%02x, %02x, %02x, %02x]"
+                                        "\n", __func__, recv_buf[0],
+                                        recv_buf[1], recv_buf[2], recv_buf[3]);
+                        } else {
+                                /* Check Received Data */
+                                if (correct_ack[0] == recv_buf[0] &&
+                                    correct_ack[1] == recv_buf[1] &&
+                                    correct_ack[2] == recv_buf[2]) {
+                                        /* Interval for next command */
+                                        mdelay(10);
+
+                                        /* Receive ACK */
+                                        return 0;
+                                }
+                        }
+                        /* Received NAK or illegal Data */
+                        printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
+                                        "Received\n", __func__);
+                }
+        } while (retry--);
+
+        /* Interval for next command */
+        mdelay(10);
+
+        return -1;
+}
+
+static void kurobox_pro_power_off(void)
+{
+        const unsigned char watchdogkill[]      = {0x01, 0x35, 0x00};
+        const unsigned char shutdownwait[]      = {0x00, 0x0c};
+        const unsigned char poweroff[]          = {0x00, 0x06};
+        /* 38400 baud divisor */
+        const unsigned divisor = ((ORION5X_TCLK + (8 * 38400)) / (16 * 38400));
+
+        pr_info("%s: triggering power-off...\n", __func__);
+
+        /* hijack uart1 and reset into sane state (38400,8n1,even parity) */
+        writel(0x83, UART1_REG(LCR));
+        writel(divisor & 0xff, UART1_REG(DLL));
+        writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+        writel(0x1b, UART1_REG(LCR));
+        writel(0x00, UART1_REG(IER));
+        writel(0x07, UART1_REG(FCR));
+        writel(0x00, UART1_REG(MCR));
+
+        /* Send the commands to shutdown the Kurobox Pro */
+        kurobox_pro_miconsend(watchdogkill, sizeof(watchdogkill)) ;
+        kurobox_pro_miconsend(shutdownwait, sizeof(shutdownwait)) ;
+        kurobox_pro_miconsend(poweroff, sizeof(poweroff));
+}
+
+/*****************************************************************************
  * General Setup
  ****************************************************************************/
+static struct orion5x_mpp_mode kurobox_pro_mpp_modes[] __initdata = {
+        {  0, MPP_UNUSED },
+        {  1, MPP_UNUSED },
+        {  2, MPP_GPIO },               /* GPIO Micon */
+        {  3, MPP_GPIO },               /* GPIO Rtc */
+        {  4, MPP_UNUSED },
+        {  5, MPP_UNUSED },
+        {  6, MPP_NAND },               /* NAND Flash REn */
+        {  7, MPP_NAND },               /* NAND Flash WEn */
+        {  8, MPP_UNUSED },
+        {  9, MPP_UNUSED },
+        { 10, MPP_UNUSED },
+        { 11, MPP_UNUSED },
+        { 12, MPP_SATA_LED },           /* SATA 0 presence */
+        { 13, MPP_SATA_LED },           /* SATA 1 presence */
+        { 14, MPP_SATA_LED },           /* SATA 0 active */
+        { 15, MPP_SATA_LED },           /* SATA 1 active */
+        { 16, MPP_UART },               /* UART1 RXD */
+        { 17, MPP_UART },               /* UART1 TXD */
+        { 18, MPP_UART },               /* UART1 CTSn */
+        { 19, MPP_UART },               /* UART1 RTSn */
+        { -1 },
+};
 
 static void __init kurobox_pro_init(void)
 {
@@ -189,46 +344,33 @@ static void __init kurobox_pro_init(void)
          */
         orion5x_init();
 
-        /*
-         * Setup the CPU address decode windows for our devices
-         */
-        orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
-                                KUROBOX_PRO_NOR_BOOT_SIZE);
-        orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE);
+        orion5x_mpp_conf(kurobox_pro_mpp_modes);
 
         /*
-         * Open a special address decode windows for the PCIe WA.
+         * Configure peripherals.
          */
-        orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
-                                ORION5X_PCIE_WA_SIZE);
-
-        /*
-         * Setup Multiplexing Pins --
-         * MPP[0-1] Not used
-         * MPP[2] GPIO Micon
-         * MPP[3] GPIO RTC
-         * MPP[4-5] Not used
-         * MPP[6] Nand Flash REn
-         * MPP[7] Nand Flash WEn
-         * MPP[8-11] Not used
-         * MPP[12] SATA 0 presence Indication
-         * MPP[13] SATA 1 presence Indication
-         * MPP[14] SATA 0 active Indication
-         * MPP[15] SATA 1 active indication
-         * MPP[16-19] Not used
-         */
-        orion5x_write(MPP_0_7_CTRL, 0x44220003);
-        orion5x_write(MPP_8_15_CTRL, 0x55550000);
-        orion5x_write(MPP_16_19_CTRL, 0x0);
-
-        orion5x_gpio_set_valid_pins(0x0000000c);
+        orion5x_ehci0_init();
+        orion5x_ehci1_init();
+        orion5x_eth_init(&kurobox_pro_eth_data);
+        orion5x_i2c_init();
+        orion5x_sata_init(&kurobox_pro_sata_data);
+        orion5x_uart0_init();
+        orion5x_uart1_init();
 
+        orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
+                                   KUROBOX_PRO_NOR_BOOT_SIZE);
         platform_device_register(&kurobox_pro_nor_flash);
-        if (machine_is_kurobox_pro())
+
+        if (machine_is_kurobox_pro()) {
+                orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE,
+                                       KUROBOX_PRO_NAND_SIZE);
                 platform_device_register(&kurobox_pro_nand_flash);
+        }
+
         i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
-        orion5x_eth_init(&kurobox_pro_eth_data);
-        orion5x_sata_init(&kurobox_pro_sata_data);
+
+        /* register Kurobox Pro specific power-off method */
+        pm_power_off = kurobox_pro_power_off;
 }
 
 #ifdef CONFIG_MACH_KUROBOX_PRO
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
new file mode 100644
index 000000000000..a48cadb01590
--- /dev/null
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -0,0 +1,163 @@
+/*
+ * arch/arm/mach-orion5x/mpp.c
+ *
+ * MPP functions for Marvell Orion 5x SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include "common.h"
+#include "mpp.h"
+
+static int is_5181l(void)
+{
+        u32 dev;
+        u32 rev;
+
+        orion5x_pcie_id(&dev, &rev);
+
+        return !!(dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0);
+}
+
+static int is_5182(void)
+{
+        u32 dev;
+        u32 rev;
+
+        orion5x_pcie_id(&dev, &rev);
+
+        return !!(dev == MV88F5182_DEV_ID);
+}
+
+static int is_5281(void)
+{
+        u32 dev;
+        u32 rev;
+
+        orion5x_pcie_id(&dev, &rev);
+
+        return !!(dev == MV88F5281_DEV_ID);
+}
+
+static int __init determine_type_encoding(int mpp, enum orion5x_mpp_type type)
+{
+        switch (type) {
+        case MPP_UNUSED:
+        case MPP_GPIO:
+                if (mpp == 0)
+                        return 3;
+                if (mpp >= 1 && mpp <= 15)
+                        return 0;
+                if (mpp >= 16 && mpp <= 19) {
+                        if (is_5182())
+                                return 5;
+                        if (type == MPP_UNUSED)
+                                return 0;
+                }
+                return -1;
+
+        case MPP_PCIE_RST_OUTn:
+                if (mpp == 0)
+                        return 0;
+                return -1;
+
+        case MPP_PCI_ARB:
+                if (mpp >= 0 && mpp <= 7)
+                        return 2;
+                return -1;
+
+        case MPP_PCI_PMEn:
+                if (mpp == 2)
+                        return 3;
+                return -1;
+
+        case MPP_GIGE:
+                if (mpp >= 8 && mpp <= 19)
+                        return 1;
+                return -1;
+
+        case MPP_NAND:
+                if (is_5182() || is_5281()) {
+                        if (mpp >= 4 && mpp <= 7)
+                                return 4;
+                        if (mpp >= 12 && mpp <= 17)
+                                return 4;
+                }
+                return -1;
+
+        case MPP_PCI_CLK:
+                if (is_5181l() && mpp >= 6 && mpp <= 7)
+                        return 5;
+                return -1;
+
+        case MPP_SATA_LED:
+                if (is_5182()) {
+                        if (mpp >= 4 && mpp <= 7)
+                                return 5;
+                        if (mpp >= 12 && mpp <= 15)
+                                return 5;
+                }
+                return -1;
+
+        case MPP_UART:
+                if (mpp >= 16 && mpp <= 19)
+                        return 0;
+                return -1;
+        }
+
+        printk(KERN_INFO "unknown MPP type %d\n", type);
+
+        return -1;
+}
+
+void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
+{
+        u32 mpp_0_7_ctrl = readl(MPP_0_7_CTRL);
+        u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
+        u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
+
+        while (mode->mpp >= 0) {
+                u32 *reg;
+                int num_type;
+                int shift;
+
+                if (mode->mpp >= 0 && mode->mpp <= 7)
+                        reg = &mpp_0_7_ctrl;
+                else if (mode->mpp >= 8 && mode->mpp <= 15)
+                        reg = &mpp_8_15_ctrl;
+                else if (mode->mpp >= 16 && mode->mpp <= 19)
+                        reg = &mpp_16_19_ctrl;
+                else {
+                        printk(KERN_ERR "orion5x_mpp_conf: invalid MPP "
+                                        "(%d)\n", mode->mpp);
+                        continue;
+                }
+
+                num_type = determine_type_encoding(mode->mpp, mode->type);
+                if (num_type < 0) {
+                        printk(KERN_ERR "orion5x_mpp_conf: invalid MPP "
+                                        "combination (%d, %d)\n", mode->mpp,
+                                        mode->type);
+                        continue;
+                }
+
+                shift = (mode->mpp & 7) << 2;
+                *reg &= ~(0xf << shift);
+                *reg |= (num_type & 0xf) << shift;
+
+                orion5x_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
+
+                mode++;
+        }
+
+        writel(mpp_0_7_ctrl, MPP_0_7_CTRL);
+        writel(mpp_8_15_ctrl, MPP_8_15_CTRL);
+        writel(mpp_16_19_ctrl, MPP_16_19_CTRL);
+}
diff --git a/arch/arm/mach-orion5x/mpp.h b/arch/arm/mach-orion5x/mpp.h
new file mode 100644
index 000000000000..290e610dc012
--- /dev/null
+++ b/arch/arm/mach-orion5x/mpp.h
@@ -0,0 +1,74 @@
+#ifndef __ARCH_ORION5X_MPP_H
+#define __ARCH_ORION5X_MPP_H
+
+enum orion5x_mpp_type {
+        /*
+         * This MPP is unused.
+         */
+        MPP_UNUSED,
+
+        /*
+         * This MPP pin is used as a generic GPIO pin.  Valid for
+         * MPPs 0-15 and device bus data pins 16-31.  On 5182, also
+         * valid for MPPs 16-19.
+         */
+        MPP_GPIO,
+
+        /*
+         * This MPP is used as PCIe_RST_OUTn pin.  Valid for
+         * MPP 0 only.
+         */
+        MPP_PCIE_RST_OUTn,
+
+        /*
+         * This MPP is used as PCI arbiter pin (REQn/GNTn).
+         * Valid for MPPs 0-7 only.
+         */
+        MPP_PCI_ARB,
+
+        /*
+         * This MPP is used as PCI_PMEn pin.  Valid for MPP 2 only.
+         */
+        MPP_PCI_PMEn,
+
+        /*
+         * This MPP is used as GigE half-duplex (COL, CRS) or GMII
+         * (RXERR, CRS, TXERR, TXD[7:4], RXD[7:4]) pin.  Valid for
+         * MPPs 8-19 only.
+         */
+        MPP_GIGE,
+
+        /*
+         * This MPP is used as NAND REn/WEn pin.  Valid for MPPs
+         * 4-7 and 12-17 only, and only on the 5181l/5182/5281.
+         */
+        MPP_NAND,
+
+        /*
+         * This MPP is used as a PCI clock output pin.  Valid for
+         * MPPs 6-7 only, and only on the 5181l.
+         */
+        MPP_PCI_CLK,
+
+        /*
+         * This MPP is used as a SATA presence/activity LED.
+         * Valid for MPPs 4-7 and 12-15 only, and only on the 5182.
+         */
+        MPP_SATA_LED,
+
+        /*
+         * This MPP is used as UART1 RXD/TXD/CTSn/RTSn pin.
+         * Valid for MPPs 16-19 only.
+         */
+        MPP_UART,
+};
+
+struct orion5x_mpp_mode {
+        int                     mpp;
+        enum orion5x_mpp_type   type;
+};
+
+void orion5x_mpp_conf(struct orion5x_mpp_mode *mode);
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
new file mode 100644
index 000000000000..7ce9e407d9d1
--- /dev/null
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -0,0 +1,270 @@
+/*
+ * Maxtor Shared Storage II Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+#define MSS2_NOR_BOOT_BASE      0xff800000
+#define MSS2_NOR_BOOT_SIZE      SZ_256K
+
+/*****************************************************************************
+ * Maxtor Shared Storage II Info
+ ****************************************************************************/
+
+/*
+ * Maxtor Shared Storage II hardware :
+ * - Marvell 88F5182-A2 C500
+ * - Marvell 88E1111 Gigabit Ethernet PHY
+ * - RTC M41T81 (@0x68) on I2C bus
+ * - 256KB NOR flash
+ * - 64MB of RAM
+ */
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data mss2_nor_flash_data = {
+        .width          = 1,
+};
+
+static struct resource mss2_nor_flash_resource = {
+        .flags          = IORESOURCE_MEM,
+        .start          = MSS2_NOR_BOOT_BASE,
+        .end            = MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device mss2_nor_flash = {
+        .name           = "physmap-flash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &mss2_nor_flash_data,
+        },
+        .resource       = &mss2_nor_flash_resource,
+        .num_resources  = 1,
+};
+
+/****************************************************************************
+ * PCI setup
+ ****************************************************************************/
+static int __init mss2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        int irq;
+
+        /*
+         * Check for devices with hard-wired IRQs.
+         */
+        irq = orion5x_pci_map_irq(dev, slot, pin);
+        if (irq != -1)
+                return irq;
+
+        return -1;
+}
+
+static struct hw_pci mss2_pci __initdata = {
+        .nr_controllers = 2,
+        .swizzle        = pci_std_swizzle,
+        .setup          = orion5x_pci_sys_setup,
+        .scan           = orion5x_pci_sys_scan_bus,
+        .map_irq        = mss2_pci_map_irq,
+};
+
+static int __init mss2_pci_init(void)
+{
+        if (machine_is_mss2())
+                pci_common_init(&mss2_pci);
+
+        return 0;
+}
+subsys_initcall(mss2_pci_init);
+
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data mss2_eth_data = {
+        .phy_addr       = 8,
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data mss2_sata_data = {
+        .n_ports        = 2,
+};
+
+/*****************************************************************************
+ * GPIO buttons
+ ****************************************************************************/
+
+#define MSS2_GPIO_KEY_RESET     12
+#define MSS2_GPIO_KEY_POWER     11
+
+static struct gpio_keys_button mss2_buttons[] = {
+        {
+                .code           = KEY_POWER,
+                .gpio           = MSS2_GPIO_KEY_POWER,
+                .desc           = "Power",
+                .active_low     = 1,
+        }, {
+                .code           = KEY_RESTART,
+                .gpio           = MSS2_GPIO_KEY_RESET,
+                .desc           = "Reset",
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_keys_platform_data mss2_button_data = {
+        .buttons        = mss2_buttons,
+        .nbuttons       = ARRAY_SIZE(mss2_buttons),
+};
+
+static struct platform_device mss2_button_device = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &mss2_button_data,
+        },
+};
+
+/*****************************************************************************
+ * RTC m41t81 on I2C bus
+ ****************************************************************************/
+
+#define MSS2_GPIO_RTC_IRQ       3
+
+static struct i2c_board_info __initdata mss2_i2c_rtc = {
+        I2C_BOARD_INFO("m41t81", 0x68),
+};
+
+/*****************************************************************************
+ * MSS2 power off method
+ ****************************************************************************/
+/*
+ * On the Maxtor Shared Storage II, the shutdown process is the following :
+ * - Userland modifies U-boot env to tell U-boot to go idle at next boot
+ * - The board reboots
+ * - U-boot starts and go into an idle mode until the user press "power"
+ */
+static void mss2_power_off(void)
+{
+        u32 reg;
+
+        /*
+         * Enable and issue soft reset
+         */
+        reg = readl(CPU_RESET_MASK);
+        reg |= 1 << 2;
+        writel(reg, CPU_RESET_MASK);
+
+        reg = readl(CPU_SOFT_RESET);
+        reg |= 1;
+        writel(reg, CPU_SOFT_RESET);
+}
+
+/****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode mss2_mpp_modes[] __initdata = {
+        {  0, MPP_GPIO },               /* Power LED */
+        {  1, MPP_GPIO },               /* Error LED */
+        {  2, MPP_UNUSED },
+        {  3, MPP_GPIO },               /* RTC interrupt */
+        {  4, MPP_GPIO },               /* HDD ind. (Single/Dual)*/
+        {  5, MPP_GPIO },               /* HD0 5V control */
+        {  6, MPP_GPIO },               /* HD0 12V control */
+        {  7, MPP_GPIO },               /* HD1 5V control */
+        {  8, MPP_GPIO },               /* HD1 12V control */
+        {  9, MPP_UNUSED },
+        { 10, MPP_GPIO },               /* Fan control */
+        { 11, MPP_GPIO },               /* Power button */
+        { 12, MPP_GPIO },               /* Reset button */
+        { 13, MPP_UNUSED },
+        { 14, MPP_SATA_LED },           /* SATA 0 active */
+        { 15, MPP_SATA_LED },           /* SATA 1 active */
+        { 16, MPP_UNUSED },
+        { 17, MPP_UNUSED },
+        { 18, MPP_UNUSED },
+        { 19, MPP_UNUSED },
+        { -1 },
+};
+
+static void __init mss2_init(void)
+{
+        /* Setup basic Orion functions. Need to be called early. */
+        orion5x_init();
+
+        orion5x_mpp_conf(mss2_mpp_modes);
+
+        /*
+         * MPP[20] Unused
+         * MPP[21] PCI clock
+         * MPP[22] USB 0 over current
+         * MPP[23] USB 1 over current
+         */
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_ehci1_init();
+        orion5x_eth_init(&mss2_eth_data);
+        orion5x_i2c_init();
+        orion5x_sata_init(&mss2_sata_data);
+        orion5x_uart0_init();
+
+        orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE);
+        platform_device_register(&mss2_nor_flash);
+
+        platform_device_register(&mss2_button_device);
+
+        if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) {
+                if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0)
+                        mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ);
+                else
+                        gpio_free(MSS2_GPIO_RTC_IRQ);
+        }
+        i2c_register_board_info(0, &mss2_i2c_rtc, 1);
+
+        /* register mss2 specific power-off method */
+        pm_power_off = mss2_power_off;
+}
+
+MACHINE_START(MSS2, "Maxtor Shared Storage II")
+        /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = mss2_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
new file mode 100644
index 000000000000..55f3b0fdef8b
--- /dev/null
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -0,0 +1,239 @@
+/*
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+#define MV2120_NOR_BOOT_BASE    0xf4000000
+#define MV2120_NOR_BOOT_SIZE    SZ_512K
+
+#define MV2120_GPIO_RTC_IRQ     3
+#define MV2120_GPIO_KEY_RESET   17
+#define MV2120_GPIO_KEY_POWER   18
+#define MV2120_GPIO_POWER_OFF   19
+
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data mv2120_eth_data = {
+        .phy_addr       = 8,
+};
+
+static struct mv_sata_platform_data mv2120_sata_data = {
+        .n_ports        = 2,
+};
+
+static struct mtd_partition mv2120_partitions[] = {
+        {
+                .name   = "firmware",
+                .size   = 0x00080000,
+                .offset = 0,
+        },
+};
+
+static struct physmap_flash_data mv2120_nor_flash_data = {
+        .width          = 1,
+        .parts          = mv2120_partitions,
+        .nr_parts       = ARRAY_SIZE(mv2120_partitions)
+};
+
+static struct resource mv2120_nor_flash_resource = {
+        .flags          = IORESOURCE_MEM,
+        .start          = MV2120_NOR_BOOT_BASE,
+        .end            = MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device mv2120_nor_flash = {
+        .name           = "physmap-flash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &mv2120_nor_flash_data,
+        },
+        .resource       = &mv2120_nor_flash_resource,
+        .num_resources  = 1,
+};
+
+static struct gpio_keys_button mv2120_buttons[] = {
+        {
+                .code           = KEY_RESTART,
+                .gpio           = MV2120_GPIO_KEY_RESET,
+                .desc           = "reset",
+                .active_low     = 1,
+        }, {
+                .code           = KEY_POWER,
+                .gpio           = MV2120_GPIO_KEY_POWER,
+                .desc           = "power",
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_keys_platform_data mv2120_button_data = {
+        .buttons        = mv2120_buttons,
+        .nbuttons       = ARRAY_SIZE(mv2120_buttons),
+};
+
+static struct platform_device mv2120_button_device = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .num_resources  = 0,
+        .dev            = {
+                .platform_data  = &mv2120_button_data,
+        },
+};
+
+
+/****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode mv2120_mpp_modes[] __initdata = {
+        {  0, MPP_GPIO },               /* Sys status LED */
+        {  1, MPP_GPIO },               /* Sys error LED */
+        {  2, MPP_GPIO },               /* OverTemp interrupt */
+        {  3, MPP_GPIO },               /* RTC interrupt */
+        {  4, MPP_GPIO },               /* V_LED 5V */
+        {  5, MPP_GPIO },               /* V_LED 3.3V */
+        {  6, MPP_UNUSED },
+        {  7, MPP_UNUSED },
+        {  8, MPP_GPIO },               /* SATA 0 fail LED */
+        {  9, MPP_GPIO },               /* SATA 1 fail LED */
+        { 10, MPP_UNUSED },
+        { 11, MPP_UNUSED },
+        { 12, MPP_SATA_LED },           /* SATA 0 presence */
+        { 13, MPP_SATA_LED },           /* SATA 1 presence */
+        { 14, MPP_SATA_LED },           /* SATA 0 active */
+        { 15, MPP_SATA_LED },           /* SATA 1 active */
+        { 16, MPP_UNUSED },
+        { 17, MPP_GPIO },               /* Reset button */
+        { 18, MPP_GPIO },               /* Power button */
+        { 19, MPP_GPIO },               /* Power off */
+        { -1 },
+};
+
+static struct i2c_board_info __initdata mv2120_i2c_rtc = {
+        I2C_BOARD_INFO("pcf8563", 0x51),
+        .irq    = 0,
+};
+
+static struct gpio_led mv2120_led_pins[] = {
+        {
+                .name                   = "mv2120:blue:health",
+                .gpio                   = 0,
+        },
+        {
+                .name                   = "mv2120:red:health",
+                .gpio                   = 1,
+        },
+        {
+                .name                   = "mv2120:led:bright",
+                .gpio                   = 4,
+                .default_trigger        = "default-on",
+        },
+        {
+                .name                   = "mv2120:led:dimmed",
+                .gpio                   = 5,
+        },
+        {
+                .name                   = "mv2120:red:sata0",
+                .gpio                   = 8,
+                .active_low             = 1,
+        },
+        {
+                .name                   = "mv2120:red:sata1",
+                .gpio                   = 9,
+                .active_low             = 1,
+        },
+
+};
+
+static struct gpio_led_platform_data mv2120_led_data = {
+        .leds           = mv2120_led_pins,
+        .num_leds       = ARRAY_SIZE(mv2120_led_pins),
+};
+
+static struct platform_device mv2120_leds = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &mv2120_led_data,
+        }
+};
+
+static void mv2120_power_off(void)
+{
+        pr_info("%s: triggering power-off...\n", __func__);
+        gpio_set_value(MV2120_GPIO_POWER_OFF, 0);
+}
+
+static void __init mv2120_init(void)
+{
+        /* Setup basic Orion functions. Need to be called early. */
+        orion5x_init();
+
+        orion5x_mpp_conf(mv2120_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_ehci1_init();
+        orion5x_eth_init(&mv2120_eth_data);
+        orion5x_i2c_init();
+        orion5x_sata_init(&mv2120_sata_data);
+        orion5x_uart0_init();
+
+        orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
+        platform_device_register(&mv2120_nor_flash);
+
+        platform_device_register(&mv2120_button_device);
+
+        if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) {
+                if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0)
+                        mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ);
+                else
+                        gpio_free(MV2120_GPIO_RTC_IRQ);
+        }
+        i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
+        platform_device_register(&mv2120_leds);
+
+        /* register mv2120 specific power-off method */
+        if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+            gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
+                pr_err("mv2120: failed to setup power-off GPIO\n");
+        pm_power_off = mv2120_power_off;
+}
+
+/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
+MACHINE_START(MV2120, "HP Media Vault mv2120")
+        /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = mv2120_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 9d5d39fa19c3..256a4f680935 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -152,6 +152,8 @@ static int __init pcie_setup(struct pci_sys_data *sys)
         if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
                 printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
                                    "read transaction workaround\n");
+                orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+                                          ORION5X_PCIE_WA_SIZE);
                 pcie_ops.read = pcie_rd_conf_wa;
         }
 
@@ -240,13 +242,13 @@ static int __init pcie_setup(struct pci_sys_data *sys)
  * PCI Address Decode Windows registers
  */
 #define PCI_BAR_SIZE_DDR_CS(n)  (((n) == 0) ? ORION5X_PCI_REG(0xc08) : \
-                                ((n) == 1) ? ORION5X_PCI_REG(0xd08) :  \
-                                ((n) == 2) ? ORION5X_PCI_REG(0xc0c) :  \
-                                ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0)
-#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION5X_PCI_REG(0xc48) :  \
-                                ((n) == 1) ? ORION5X_PCI_REG(0xd48) :  \
-                                ((n) == 2) ? ORION5X_PCI_REG(0xc4c) :  \
-                                ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0)
+                                 ((n) == 1) ? ORION5X_PCI_REG(0xd08) : \
+                                 ((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \
+                                 ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0)
+#define PCI_BAR_REMAP_DDR_CS(n) (((n) == 0) ? ORION5X_PCI_REG(0xc48) : \
+                                 ((n) == 1) ? ORION5X_PCI_REG(0xd48) : \
+                                 ((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \
+                                 ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0)
 #define PCI_BAR_ENABLE          ORION5X_PCI_REG(0xc3c)
 #define PCI_ADDR_DECODE_CTRL    ORION5X_PCI_REG(0xd3c)
 
@@ -264,9 +266,11 @@ static int __init pcie_setup(struct pci_sys_data *sys)
  */
 static DEFINE_SPINLOCK(orion5x_pci_lock);
 
+static int orion5x_pci_cardbus_mode;
+
 static int orion5x_pci_local_bus_nr(void)
 {
-        u32 conf = orion5x_read(PCI_P2P_CONF);
+        u32 conf = readl(PCI_P2P_CONF);
         return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
 }
 
@@ -276,11 +280,11 @@ static int orion5x_pci_hw_rd_conf(int bus, int dev, u32 func,
         unsigned long flags;
         spin_lock_irqsave(&orion5x_pci_lock, flags);
 
-        orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
-                        PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
-                        PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+        writel(PCI_CONF_BUS(bus) |
+                PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+                PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN, PCI_CONF_ADDR);
 
-        *val = orion5x_read(PCI_CONF_DATA);
+        *val = readl(PCI_CONF_DATA);
 
         if (size == 1)
                 *val = (*val >> (8*(where & 0x3))) & 0xff;
@@ -300,9 +304,9 @@ static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func,
 
         spin_lock_irqsave(&orion5x_pci_lock, flags);
 
-        orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
-                        PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
-                        PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+        writel(PCI_CONF_BUS(bus) |
+                PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+                PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN, PCI_CONF_ADDR);
 
         if (size == 4) {
                 __raw_writel(val, PCI_CONF_DATA);
@@ -319,14 +323,30 @@ static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func,
         return ret;
 }
 
+static int orion5x_pci_valid_config(int bus, u32 devfn)
+{
+        if (bus == orion5x_pci_local_bus_nr()) {
+                /*
+                 * Don't go out for local device
+                 */
+                if (PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0)
+                        return 0;
+
+                /*
+                 * When the PCI signals are directly connected to a
+                 * Cardbus slot, ignore all but device IDs 0 and 1.
+                 */
+                if (orion5x_pci_cardbus_mode && PCI_SLOT(devfn) > 1)
+                        return 0;
+        }
+
+        return 1;
+}
+
 static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn,
                                 int where, int size, u32 *val)
 {
-        /*
-         * Don't go out for local device
-         */
-        if (bus->number == orion5x_pci_local_bus_nr() &&
-            PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) {
+        if (!orion5x_pci_valid_config(bus->number, devfn)) {
                 *val = 0xffffffff;
                 return PCIBIOS_DEVICE_NOT_FOUND;
         }
@@ -338,8 +358,7 @@ static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn,
 static int orion5x_pci_wr_conf(struct pci_bus *bus, u32 devfn,
                                 int where, int size, u32 val)
 {
-        if (bus->number == orion5x_pci_local_bus_nr() &&
-            PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0)
+        if (!orion5x_pci_valid_config(bus->number, devfn))
                 return PCIBIOS_DEVICE_NOT_FOUND;
 
         return orion5x_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn),
@@ -353,9 +372,9 @@ static struct pci_ops pci_ops = {
 
 static void __init orion5x_pci_set_bus_nr(int nr)
 {
-        u32 p2p = orion5x_read(PCI_P2P_CONF);
+        u32 p2p = readl(PCI_P2P_CONF);
 
-        if (orion5x_read(PCI_MODE) & PCI_MODE_PCIX) {
+        if (readl(PCI_MODE) & PCI_MODE_PCIX) {
                 /*
                  * PCI-X mode
                  */
@@ -372,7 +391,7 @@ static void __init orion5x_pci_set_bus_nr(int nr)
                  */
                 p2p &= ~PCI_P2P_BUS_MASK;
                 p2p |= (nr << PCI_P2P_BUS_OFFS);
-                orion5x_write(PCI_P2P_CONF, p2p);
+                writel(p2p, PCI_P2P_CONF);
         }
 }
 
@@ -399,7 +418,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
          * First, disable windows.
          */
         win_enable = 0xffffffff;
-        orion5x_write(PCI_BAR_ENABLE, win_enable);
+        writel(win_enable, PCI_BAR_ENABLE);
 
         /*
          * Setup windows for DDR banks.
@@ -425,10 +444,10 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
                  */
                 reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index);
                 orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0);
-                orion5x_write(PCI_BAR_SIZE_DDR_CS(cs->cs_index),
-                                (cs->size - 1) & 0xfffff000);
-                orion5x_write(PCI_BAR_REMAP_DDR_CS(cs->cs_index),
-                                cs->base & 0xfffff000);
+                writel((cs->size - 1) & 0xfffff000,
+                        PCI_BAR_SIZE_DDR_CS(cs->cs_index));
+                writel(cs->base & 0xfffff000,
+                        PCI_BAR_REMAP_DDR_CS(cs->cs_index));
 
                 /*
                  * Enable decode window for this chip select.
@@ -439,7 +458,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
         /*
          * Re-enable decode windows.
          */
-        orion5x_write(PCI_BAR_ENABLE, win_enable);
+        writel(win_enable, PCI_BAR_ENABLE);
 
         /*
          * Disable automatic update of address remaping when writing to BARs.
@@ -522,6 +541,11 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
 
+void __init orion5x_pci_set_cardbus_mode(void)
+{
+        orion5x_pci_cardbus_mode = 1;
+}
+
 int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
 {
         int ret = 0;
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
new file mode 100644
index 000000000000..d50e3650a09e
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -0,0 +1,161 @@
+/*
+ * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+ *
+ * Marvell Orion-VoIP FXO Reference Design Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * RD-88F5181L FXO Info
+ ****************************************************************************/
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define RD88F5181L_FXO_NOR_BOOT_BASE            0xff800000
+#define RD88F5181L_FXO_NOR_BOOT_SIZE            SZ_8M
+
+
+/*****************************************************************************
+ * 8M NOR Flash on Device bus Boot chip select
+ ****************************************************************************/
+static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = {
+        .width          = 1,
+};
+
+static struct resource rd88f5181l_fxo_nor_boot_flash_resource = {
+        .flags          = IORESOURCE_MEM,
+        .start          = RD88F5181L_FXO_NOR_BOOT_BASE,
+        .end            = RD88F5181L_FXO_NOR_BOOT_BASE +
+                          RD88F5181L_FXO_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device rd88f5181l_fxo_nor_boot_flash = {
+        .name                   = "physmap-flash",
+        .id                     = 0,
+        .dev            = {
+                .platform_data  = &rd88f5181l_fxo_nor_boot_flash_data,
+        },
+        .num_resources          = 1,
+        .resource               = &rd88f5181l_fxo_nor_boot_flash_resource,
+};
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
+        {  0, MPP_GPIO },               /* LED1 CardBus LED (front panel) */
+        {  1, MPP_GPIO },               /* PCI_intA */
+        {  2, MPP_GPIO },               /* Hard Reset / Factory Init*/
+        {  3, MPP_GPIO },               /* FXS or DAA select */
+        {  4, MPP_GPIO },               /* LED6 - phone LED (front panel) */
+        {  5, MPP_GPIO },               /* LED5 - phone LED (front panel) */
+        {  6, MPP_PCI_CLK },            /* CPU PCI refclk */
+        {  7, MPP_PCI_CLK },            /* PCI/PCIe refclk */
+        {  8, MPP_GPIO },               /* CardBus reset */
+        {  9, MPP_GPIO },               /* GE_RXERR */
+        { 10, MPP_GPIO },               /* LED2 MiniPCI LED (front panel) */
+        { 11, MPP_GPIO },               /* Lifeline control */
+        { 12, MPP_GIGE },               /* GE_TXD[4] */
+        { 13, MPP_GIGE },               /* GE_TXD[5] */
+        { 14, MPP_GIGE },               /* GE_TXD[6] */
+        { 15, MPP_GIGE },               /* GE_TXD[7] */
+        { 16, MPP_GIGE },               /* GE_RXD[4] */
+        { 17, MPP_GIGE },               /* GE_RXD[5] */
+        { 18, MPP_GIGE },               /* GE_RXD[6] */
+        { 19, MPP_GIGE },               /* GE_RXD[7] */
+        { -1 },
+};
+
+static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
+        .phy_addr       = -1,
+};
+
+static void __init rd88f5181l_fxo_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_eth_init(&rd88f5181l_fxo_eth_data);
+        orion5x_uart0_init();
+
+        orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
+                                   RD88F5181L_FXO_NOR_BOOT_SIZE);
+        platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
+}
+
+static int __init
+rd88f5181l_fxo_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        int irq;
+
+        /*
+         * Check for devices with hard-wired IRQs.
+         */
+        irq = orion5x_pci_map_irq(dev, slot, pin);
+        if (irq != -1)
+                return irq;
+
+        /*
+         * Mini-PCI / Cardbus slot.
+         */
+        return gpio_to_irq(1);
+}
+
+static struct hw_pci rd88f5181l_fxo_pci __initdata = {
+        .nr_controllers = 2,
+        .swizzle        = pci_std_swizzle,
+        .setup          = orion5x_pci_sys_setup,
+        .scan           = orion5x_pci_sys_scan_bus,
+        .map_irq        = rd88f5181l_fxo_pci_map_irq,
+};
+
+static int __init rd88f5181l_fxo_pci_init(void)
+{
+        if (machine_is_rd88f5181l_fxo()) {
+                orion5x_pci_set_cardbus_mode();
+                pci_common_init(&rd88f5181l_fxo_pci);
+        }
+
+        return 0;
+}
+subsys_initcall(rd88f5181l_fxo_pci_init);
+
+MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
+        /* Maintainer: Nicolas Pitre <nico@marvell.com> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = rd88f5181l_fxo_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
new file mode 100644
index 000000000000..b56447d32e17
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+ *
+ * Marvell Orion-VoIP GE Reference Design Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * RD-88F5181L GE Info
+ ****************************************************************************/
+/*
+ * 16M NOR flash Device bus boot chip select
+ */
+#define RD88F5181L_GE_NOR_BOOT_BASE             0xff000000
+#define RD88F5181L_GE_NOR_BOOT_SIZE             SZ_16M
+
+
+/*****************************************************************************
+ * 16M NOR Flash on Device bus Boot chip select
+ ****************************************************************************/
+static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
+        .width          = 1,
+};
+
+static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
+        .flags          = IORESOURCE_MEM,
+        .start          = RD88F5181L_GE_NOR_BOOT_BASE,
+        .end            = RD88F5181L_GE_NOR_BOOT_BASE +
+                          RD88F5181L_GE_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device rd88f5181l_ge_nor_boot_flash = {
+        .name                   = "physmap-flash",
+        .id                     = 0,
+        .dev            = {
+                .platform_data  = &rd88f5181l_ge_nor_boot_flash_data,
+        },
+        .num_resources          = 1,
+        .resource               = &rd88f5181l_ge_nor_boot_flash_resource,
+};
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
+        {  0, MPP_GPIO },               /* LED1 */
+        {  1, MPP_GPIO },               /* LED5 */
+        {  2, MPP_GPIO },               /* LED4 */
+        {  3, MPP_GPIO },               /* LED3 */
+        {  4, MPP_GPIO },               /* PCI_intA */
+        {  5, MPP_GPIO },               /* RTC interrupt */
+        {  6, MPP_PCI_CLK },            /* CPU PCI refclk */
+        {  7, MPP_PCI_CLK },            /* PCI/PCIe refclk */
+        {  8, MPP_GPIO },               /* 88e6131 interrupt */
+        {  9, MPP_GPIO },               /* GE_RXERR */
+        { 10, MPP_GPIO },               /* PCI_intB */
+        { 11, MPP_GPIO },               /* LED2 */
+        { 12, MPP_GIGE },               /* GE_TXD[4] */
+        { 13, MPP_GIGE },               /* GE_TXD[5] */
+        { 14, MPP_GIGE },               /* GE_TXD[6] */
+        { 15, MPP_GIGE },               /* GE_TXD[7] */
+        { 16, MPP_GIGE },               /* GE_RXD[4] */
+        { 17, MPP_GIGE },               /* GE_RXD[5] */
+        { 18, MPP_GIGE },               /* GE_RXD[6] */
+        { 19, MPP_GIGE },               /* GE_RXD[7] */
+        { -1 },
+};
+
+static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
+        .phy_addr       = -1,
+};
+
+static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
+        I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+static void __init rd88f5181l_ge_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_eth_init(&rd88f5181l_ge_eth_data);
+        orion5x_i2c_init();
+        orion5x_uart0_init();
+
+        orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
+                                   RD88F5181L_GE_NOR_BOOT_SIZE);
+        platform_device_register(&rd88f5181l_ge_nor_boot_flash);
+
+        i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
+}
+
+static int __init
+rd88f5181l_ge_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        int irq;
+
+        /*
+         * Check for devices with hard-wired IRQs.
+         */
+        irq = orion5x_pci_map_irq(dev, slot, pin);
+        if (irq != -1)
+                return irq;
+
+        /*
+         * Cardbus slot.
+         */
+        if (pin == 1)
+                return gpio_to_irq(4);
+        else
+                return gpio_to_irq(10);
+}
+
+static struct hw_pci rd88f5181l_ge_pci __initdata = {
+        .nr_controllers = 2,
+        .swizzle        = pci_std_swizzle,
+        .setup          = orion5x_pci_sys_setup,
+        .scan           = orion5x_pci_sys_scan_bus,
+        .map_irq        = rd88f5181l_ge_pci_map_irq,
+};
+
+static int __init rd88f5181l_ge_pci_init(void)
+{
+        if (machine_is_rd88f5181l_ge()) {
+                orion5x_pci_set_cardbus_mode();
+                pci_common_init(&rd88f5181l_ge_pci);
+        }
+
+        return 0;
+}
+subsys_initcall(rd88f5181l_ge_pci_init);
+
+MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
+        /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = rd88f5181l_ge_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 81abc1003aae..10ae62864269 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -26,6 +26,7 @@
 #include <asm/mach/pci.h>
 #include <asm/arch/orion5x.h>
 #include "common.h"
+#include "mpp.h"
 
 /*****************************************************************************
  * RD-88F5182 Info
@@ -125,6 +126,7 @@ static int __init rd88f5182_dbgled_init(void)
 
                 leds_event = rd88f5182_dbgled_event;
         }
+
         return 0;
 }
 
@@ -220,7 +222,6 @@ subsys_initcall(rd88f5182_pci_init);
 
 static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
         .phy_addr       = 8,
-        .force_phy_addr = 1,
 };
 
 /*****************************************************************************
@@ -234,15 +235,34 @@ static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
  * Sata
  ****************************************************************************/
 static struct mv_sata_platform_data rd88f5182_sata_data = {
-        .n_ports        = 2,
+        .n_ports        = 2,
 };
 
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
-
-static struct platform_device *rd88f5182_devices[] __initdata = {
-        &rd88f5182_nor_flash,
+static struct orion5x_mpp_mode rd88f5182_mpp_modes[] __initdata = {
+        {  0, MPP_GPIO },               /* Debug Led */
+        {  1, MPP_GPIO },               /* Reset Switch */
+        {  2, MPP_UNUSED },
+        {  3, MPP_GPIO },               /* RTC Int */
+        {  4, MPP_GPIO },
+        {  5, MPP_GPIO },
+        {  6, MPP_GPIO },               /* PCI_intA */
+        {  7, MPP_GPIO },               /* PCI_intB */
+        {  8, MPP_UNUSED },
+        {  9, MPP_UNUSED },
+        { 10, MPP_UNUSED },
+        { 11, MPP_UNUSED },
+        { 12, MPP_SATA_LED },           /* SATA 0 presence */
+        { 13, MPP_SATA_LED },           /* SATA 1 presence */
+        { 14, MPP_SATA_LED },           /* SATA 0 active */
+        { 15, MPP_SATA_LED },           /* SATA 1 active */
+        { 16, MPP_UNUSED },
+        { 17, MPP_UNUSED },
+        { 18, MPP_UNUSED },
+        { 19, MPP_UNUSED },
+        { -1 },
 };
 
 static void __init rd88f5182_init(void)
@@ -252,35 +272,9 @@ static void __init rd88f5182_init(void)
          */
         orion5x_init();
 
-        /*
-         * Setup the CPU address decode windows for our devices
-         */
-        orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
-                                RD88F5182_NOR_BOOT_SIZE);
-        orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
-
-        /*
-         * Open a special address decode windows for the PCIe WA.
-         */
-        orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
-                                ORION5X_PCIE_WA_SIZE);
+        orion5x_mpp_conf(rd88f5182_mpp_modes);
 
         /*
-         * Setup Multiplexing Pins --
-         * MPP[0] Debug Led (GPIO - Out)
-         * MPP[1] Debug Led (GPIO - Out)
-         * MPP[2] N/A
-         * MPP[3] RTC_Int (GPIO - In)
-         * MPP[4] GPIO
-         * MPP[5] GPIO
-         * MPP[6] PCI_intA (GPIO - In)
-         * MPP[7] PCI_intB (GPIO - In)
-         * MPP[8-11] N/A
-         * MPP[12] SATA 0 presence Indication
-         * MPP[13] SATA 1 presence Indication
-         * MPP[14] SATA 0 active Indication
-         * MPP[15] SATA 1 active indication
-         * MPP[16-19] Not used
          * MPP[20] PCI Clock to MV88F5182
          * MPP[21] PCI Clock to mini PCI CON11
          * MPP[22] USB 0 over current indication
@@ -289,16 +283,23 @@ static void __init rd88f5182_init(void)
          * MPP[25] USB 0 over current enable
          */
 
-        orion5x_write(MPP_0_7_CTRL, 0x00000003);
-        orion5x_write(MPP_8_15_CTRL, 0x55550000);
-        orion5x_write(MPP_16_19_CTRL, 0x5555);
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_ehci1_init();
+        orion5x_eth_init(&rd88f5182_eth_data);
+        orion5x_i2c_init();
+        orion5x_sata_init(&rd88f5182_sata_data);
+        orion5x_uart0_init();
 
-        orion5x_gpio_set_valid_pins(0x000000fb);
+        orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
+                                   RD88F5182_NOR_BOOT_SIZE);
+
+        orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
+        platform_device_register(&rd88f5182_nor_flash);
 
-        platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
         i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
-        orion5x_eth_init(&rd88f5182_eth_data);
-        orion5x_sata_init(&rd88f5182_sata_data);
 }
 
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 9afb41ee6e07..a9cef9703d5b 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -28,6 +28,8 @@
 #include <asm/mach/pci.h>
 #include <asm/arch/orion5x.h>
 #include "common.h"
+#include "mpp.h"
+#include "tsx09-common.h"
 
 #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
 #define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
@@ -47,52 +49,54 @@
  ***************************************************************************/
 static struct mtd_partition qnap_ts209_partitions[] = {
         {
-                .name       = "U-Boot",
-                .size       = 0x00080000,
-                .offset     = 0x00780000,
-                .mask_flags = MTD_WRITEABLE,
+                .name           = "U-Boot",
+                .size           = 0x00080000,
+                .offset         = 0x00780000,
+                .mask_flags     = MTD_WRITEABLE,
         }, {
-                .name   = "Kernel",
-                .size   = 0x00200000,
-                .offset = 0,
+                .name           = "Kernel",
+                .size           = 0x00200000,
+                .offset         = 0,
         }, {
-                .name   = "RootFS1",
-                .size   = 0x00400000,
-                .offset = 0x00200000,
+                .name           = "RootFS1",
+                .size           = 0x00400000,
+                .offset         = 0x00200000,
         }, {
-                .name   = "RootFS2",
-                .size   = 0x00100000,
-                .offset = 0x00600000,
+                .name           = "RootFS2",
+                .size           = 0x00100000,
+                .offset         = 0x00600000,
         }, {
-                .name   = "U-Boot Config",
-                .size   = 0x00020000,
-                .offset = 0x00760000,
+                .name           = "U-Boot Config",
+                .size           = 0x00020000,
+                .offset         = 0x00760000,
         }, {
-                .name       = "NAS Config",
-                .size       = 0x00060000,
-                .offset     = 0x00700000,
-                .mask_flags = MTD_WRITEABLE,
-        }
+                .name           = "NAS Config",
+                .size           = 0x00060000,
+                .offset         = 0x00700000,
+                .mask_flags     = MTD_WRITEABLE,
+        },
 };
 
 static struct physmap_flash_data qnap_ts209_nor_flash_data = {
-        .width    = 1,
-        .parts    = qnap_ts209_partitions,
-        .nr_parts = ARRAY_SIZE(qnap_ts209_partitions)
+        .width          = 1,
+        .parts          = qnap_ts209_partitions,
+        .nr_parts       = ARRAY_SIZE(qnap_ts209_partitions)
 };
 
 static struct resource qnap_ts209_nor_flash_resource = {
-        .flags = IORESOURCE_MEM,
-        .start = QNAP_TS209_NOR_BOOT_BASE,
-        .end   = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
+        .flags  = IORESOURCE_MEM,
+        .start  = QNAP_TS209_NOR_BOOT_BASE,
+        .end    = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
 };
 
 static struct platform_device qnap_ts209_nor_flash = {
-        .name          = "physmap-flash",
-        .id            = 0,
-        .dev           = { .platform_data = &qnap_ts209_nor_flash_data, },
-        .resource      = &qnap_ts209_nor_flash_resource,
-        .num_resources = 1,
+        .name           = "physmap-flash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &qnap_ts209_nor_flash_data,
+        },
+        .resource       = &qnap_ts209_nor_flash_resource,
+        .num_resources  = 1,
 };
 
 /*****************************************************************************
@@ -164,12 +168,12 @@ static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci qnap_ts209_pci __initdata = {
-        .nr_controllers = 2,
-        .preinit        = qnap_ts209_pci_preinit,
-        .swizzle        = pci_std_swizzle,
-        .setup          = orion5x_pci_sys_setup,
-        .scan           = orion5x_pci_sys_scan_bus,
-        .map_irq        = qnap_ts209_pci_map_irq,
+        .nr_controllers = 2,
+        .preinit        = qnap_ts209_pci_preinit,
+        .swizzle        = pci_std_swizzle,
+        .setup          = orion5x_pci_sys_setup,
+        .scan           = orion5x_pci_sys_scan_bus,
+        .map_irq        = qnap_ts209_pci_map_irq,
 };
 
 static int __init qnap_ts209_pci_init(void)
@@ -183,96 +187,6 @@ static int __init qnap_ts209_pci_init(void)
 subsys_initcall(qnap_ts209_pci_init);
 
 /*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
-        .phy_addr       = 8,
-        .force_phy_addr = 1,
-};
-
-static int __init parse_hex_nibble(char n)
-{
-        if (n >= '0' && n <= '9')
-                return n - '0';
-
-        if (n >= 'A' && n <= 'F')
-                return n - 'A' + 10;
-
-        if (n >= 'a' && n <= 'f')
-                return n - 'a' + 10;
-
-        return -1;
-}
-
-static int __init parse_hex_byte(const char *b)
-{
-        int hi;
-        int lo;
-
-        hi = parse_hex_nibble(b[0]);
-        lo = parse_hex_nibble(b[1]);
-
-        if (hi < 0 || lo < 0)
-                return -1;
-
-        return (hi << 4) | lo;
-}
-
-static int __init check_mac_addr(const char *addr_str)
-{
-        u_int8_t addr[6];
-        int i;
-
-        for (i = 0; i < 6; i++) {
-                int byte;
-
-                /*
-                 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
-                 */
-                if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
-                        return -1;
-
-                byte = parse_hex_byte(addr_str + (i * 3));
-                if (byte < 0)
-                        return -1;
-                addr[i] = byte;
-        }
-
-        printk(KERN_INFO "ts209: found ethernet mac address ");
-        for (i = 0; i < 6; i++)
-                printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
-
-        memcpy(qnap_ts209_eth_data.mac_addr, addr, 6);
-
-        return 0;
-}
-
-/*
- * The 'NAS Config' flash partition has an ext2 filesystem which
- * contains a file that has the ethernet MAC address in plain text
- * (format "xx:xx:xx:xx:xx:xx\n".)
- */
-static void __init ts209_find_mac_addr(void)
-{
-        unsigned long addr;
-
-        for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
-                char *nor_page;
-                int ret = 0;
-
-                nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024);
-                if (nor_page != NULL) {
-                        ret = check_mac_addr(nor_page);
-                        iounmap(nor_page);
-                }
-
-                if (ret == 0)
-                        break;
-        }
-}
-
-/*****************************************************************************
  * RTC S35390A on I2C bus
  ****************************************************************************/
 
@@ -280,7 +194,7 @@ static void __init ts209_find_mac_addr(void)
 
 static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
         I2C_BOARD_INFO("s35390a", 0x30),
-       .irq         = 0,
+        .irq    = 0,
 };
 
 /****************************************************************************
@@ -297,70 +211,63 @@ static struct gpio_keys_button qnap_ts209_buttons[] = {
                 .gpio           = QNAP_TS209_GPIO_KEY_MEDIA,
                 .desc           = "USB Copy Button",
                 .active_low     = 1,
-        },
-        {
+        }, {
                 .code           = KEY_POWER,
                 .gpio           = QNAP_TS209_GPIO_KEY_RESET,
                 .desc           = "Reset Button",
                 .active_low     = 1,
-        }
+        },
 };
 
 static struct gpio_keys_platform_data qnap_ts209_button_data = {
         .buttons        = qnap_ts209_buttons,
-        .nbuttons       = ARRAY_SIZE(qnap_ts209_buttons),
+        .nbuttons       = ARRAY_SIZE(qnap_ts209_buttons),
 };
 
 static struct platform_device qnap_ts209_button_device = {
         .name           = "gpio-keys",
         .id             = -1,
         .num_resources  = 0,
-        .dev            = { .platform_data  = &qnap_ts209_button_data, },
+        .dev            = {
+                .platform_data  = &qnap_ts209_button_data,
+        },
 };
 
 /*****************************************************************************
  * SATA
  ****************************************************************************/
 static struct mv_sata_platform_data qnap_ts209_sata_data = {
-        .n_ports        = 2,
+        .n_ports        = 2,
 };
 
 /*****************************************************************************
 
  * General Setup
  ****************************************************************************/
-
-static struct platform_device *qnap_ts209_devices[] __initdata = {
-        &qnap_ts209_nor_flash,
-        &qnap_ts209_button_device,
+static struct orion5x_mpp_mode ts209_mpp_modes[] __initdata = {
+        {  0, MPP_UNUSED },
+        {  1, MPP_GPIO },               /* USB copy button */
+        {  2, MPP_GPIO },               /* Load defaults button */
+        {  3, MPP_GPIO },               /* GPIO RTC */
+        {  4, MPP_UNUSED },
+        {  5, MPP_UNUSED },
+        {  6, MPP_GPIO },               /* PCI Int A */
+        {  7, MPP_GPIO },               /* PCI Int B */
+        {  8, MPP_UNUSED },
+        {  9, MPP_UNUSED },
+        { 10, MPP_UNUSED },
+        { 11, MPP_UNUSED },
+        { 12, MPP_SATA_LED },           /* SATA 0 presence */
+        { 13, MPP_SATA_LED },           /* SATA 1 presence */
+        { 14, MPP_SATA_LED },           /* SATA 0 active */
+        { 15, MPP_SATA_LED },           /* SATA 1 active */
+        { 16, MPP_UART },               /* UART1 RXD */
+        { 17, MPP_UART },               /* UART1 TXD */
+        { 18, MPP_GPIO },               /* SW_RST */
+        { 19, MPP_UNUSED },
+        { -1 },
 };
 
-/*
- * QNAP TS-[12]09 specific power off method via UART1-attached PIC
- */
-
-#define UART1_REG(x)  (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-static void qnap_ts209_power_off(void)
-{
-        /* 19200 baud divisor */
-        const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
-
-        pr_info("%s: triggering power-off...\n", __func__);
-
-        /* hijack uart1 and reset into sane state (19200,8n1) */
-        orion5x_write(UART1_REG(LCR), 0x83);
-        orion5x_write(UART1_REG(DLL), divisor & 0xff);
-        orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
-        orion5x_write(UART1_REG(LCR), 0x03);
-        orion5x_write(UART1_REG(IER), 0x00);
-        orion5x_write(UART1_REG(FCR), 0x00);
-        orion5x_write(UART1_REG(MCR), 0x00);
-
-        /* send the power-off command 'A' to PIC */
-        orion5x_write(UART1_REG(TX), 'A');
-}
-
 static void __init qnap_ts209_init(void)
 {
         /*
@@ -368,51 +275,33 @@ static void __init qnap_ts209_init(void)
          */
         orion5x_init();
 
-        /*
-         * Setup flash mapping
-         */
-        orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
-                            QNAP_TS209_NOR_BOOT_SIZE);
-
-        /*
-         * Open a special address decode windows for the PCIe WA.
-         */
-        orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
-                                ORION5X_PCIE_WA_SIZE);
+        orion5x_mpp_conf(ts209_mpp_modes);
 
         /*
-         * Setup Multiplexing Pins --
-         * MPP[0] Reserved
-         * MPP[1] USB copy button (0 active)
-         * MPP[2] Load defaults button (0 active)
-         * MPP[3] GPIO RTC
-         * MPP[4-5] Reserved
-         * MPP[6] PCI Int A
-         * MPP[7] PCI Int B
-         * MPP[8-11] Reserved
-         * MPP[12] SATA 0 presence
-         * MPP[13] SATA 1 presence
-         * MPP[14] SATA 0 active
-         * MPP[15] SATA 1 active
-         * MPP[16] UART1 RXD
-         * MPP[17] UART1 TXD
-         * MPP[18] SW_RST (0 active)
-         * MPP[19] Reserved
          * MPP[20] PCI clock 0
          * MPP[21] PCI clock 1
          * MPP[22] USB 0 over current
          * MPP[23-25] Reserved
          */
-        orion5x_write(MPP_0_7_CTRL, 0x3);
-        orion5x_write(MPP_8_15_CTRL, 0x55550000);
-        orion5x_write(MPP_16_19_CTRL, 0x5500);
-        orion5x_gpio_set_valid_pins(0x3cc0fff);
 
-        /* register ts209 specific power-off method */
-        pm_power_off = qnap_ts209_power_off;
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_ehci1_init();
+        qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
+                                 qnap_ts209_partitions[5].offset,
+                                 qnap_ts209_partitions[5].size);
+        orion5x_eth_init(&qnap_tsx09_eth_data);
+        orion5x_i2c_init();
+        orion5x_sata_init(&qnap_ts209_sata_data);
+        orion5x_uart0_init();
+
+        orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+                                   QNAP_TS209_NOR_BOOT_SIZE);
+        platform_device_register(&qnap_ts209_nor_flash);
 
-        platform_add_devices(qnap_ts209_devices,
-                                ARRAY_SIZE(qnap_ts209_devices));
+        platform_device_register(&qnap_ts209_button_device);
 
         /* Get RTC IRQ and register the chip */
         if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
@@ -425,14 +314,12 @@ static void __init qnap_ts209_init(void)
                 pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
         i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
-        ts209_find_mac_addr();
-        orion5x_eth_init(&qnap_ts209_eth_data);
-
-        orion5x_sata_init(&qnap_ts209_sata_data);
+        /* register tsx09 specific power-off method */
+        pm_power_off = qnap_tsx09_power_off;
 }
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
-        /* Maintainer:  Byron Bradley <byron.bbradley@gmail.com> */
+        /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
         .phys_io        = ORION5X_REGS_PHYS_BASE,
         .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
         .boot_params    = 0x00000100,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
new file mode 100644
index 000000000000..32f0ff073b7e
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -0,0 +1,273 @@
+/*
+ * QNAP TS-409 Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx09-common.h"
+
+/*****************************************************************************
+ * QNAP TS-409 Info
+ ****************************************************************************/
+
+/*
+ * QNAP TS-409 hardware :
+ * - Marvell 88F5281-D0
+ * - Marvell 88SX7042 SATA controller (PCIe)
+ * - Marvell 88E1118 Gigabit Ethernet PHY
+ * - RTC S35390A (@0x30) on I2C bus
+ * - 8MB NOR flash
+ * - 256MB of DDR-2 RAM
+ */
+
+/*
+ * 8MB NOR flash Device bus boot chip select
+ */
+
+#define QNAP_TS409_NOR_BOOT_BASE 0xff800000
+#define QNAP_TS409_NOR_BOOT_SIZE SZ_8M
+
+/****************************************************************************
+ * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatability with
+ *     existing QNAP firmware.
+ *
+ * Layout as used by QNAP:
+ *  [2] 0x00000000-0x00200000 : "Kernel"
+ *  [3] 0x00200000-0x00600000 : "RootFS1"
+ *  [4] 0x00600000-0x00700000 : "RootFS2"
+ *  [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
+ *  [5] 0x00760000-0x00780000 : "U-Boot Config"
+ *  [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
+ ***************************************************************************/
+static struct mtd_partition qnap_ts409_partitions[] = {
+        {
+                .name           = "U-Boot",
+                .size           = 0x00080000,
+                .offset         = 0x00780000,
+                .mask_flags     = MTD_WRITEABLE,
+        }, {
+                .name           = "Kernel",
+                .size           = 0x00200000,
+                .offset         = 0,
+        }, {
+                .name           = "RootFS1",
+                .size           = 0x00400000,
+                .offset         = 0x00200000,
+        }, {
+                .name           = "RootFS2",
+                .size           = 0x00100000,
+                .offset         = 0x00600000,
+        }, {
+                .name           = "U-Boot Config",
+                .size           = 0x00020000,
+                .offset         = 0x00760000,
+        }, {
+                .name           = "NAS Config",
+                .size           = 0x00060000,
+                .offset         = 0x00700000,
+                .mask_flags     = MTD_WRITEABLE,
+        },
+};
+
+static struct physmap_flash_data qnap_ts409_nor_flash_data = {
+        .width          = 1,
+        .parts          = qnap_ts409_partitions,
+        .nr_parts       = ARRAY_SIZE(qnap_ts409_partitions)
+};
+
+static struct resource qnap_ts409_nor_flash_resource = {
+        .flags  = IORESOURCE_MEM,
+        .start  = QNAP_TS409_NOR_BOOT_BASE,
+        .end    = QNAP_TS409_NOR_BOOT_BASE + QNAP_TS409_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device qnap_ts409_nor_flash = {
+        .name           = "physmap-flash",
+        .id             = 0,
+        .dev            = { .platform_data = &qnap_ts409_nor_flash_data, },
+        .num_resources  = 1,
+        .resource       = &qnap_ts409_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static int __init qnap_ts409_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        int irq;
+
+        /*
+         * Check for devices with hard-wired IRQs.
+         */
+        irq = orion5x_pci_map_irq(dev, slot, pin);
+        if (irq != -1)
+                return irq;
+
+        /*
+         * PCI isn't used on the TS-409
+         */
+        return -1;
+}
+
+static struct hw_pci qnap_ts409_pci __initdata = {
+        .nr_controllers = 2,
+        .swizzle        = pci_std_swizzle,
+        .setup          = orion5x_pci_sys_setup,
+        .scan           = orion5x_pci_sys_scan_bus,
+        .map_irq        = qnap_ts409_pci_map_irq,
+};
+
+static int __init qnap_ts409_pci_init(void)
+{
+        if (machine_is_ts409())
+                pci_common_init(&qnap_ts409_pci);
+
+        return 0;
+}
+
+subsys_initcall(qnap_ts409_pci_init);
+
+/*****************************************************************************
+ * RTC S35390A on I2C bus
+ ****************************************************************************/
+
+#define TS409_RTC_GPIO  10
+
+static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
+        I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ *     Power button is attached to the PIC microcontroller
+ ****************************************************************************/
+
+#define QNAP_TS409_GPIO_KEY_MEDIA       15
+
+static struct gpio_keys_button qnap_ts409_buttons[] = {
+        {
+                .code           = KEY_RESTART,
+                .gpio           = QNAP_TS409_GPIO_KEY_MEDIA,
+                .desc           = "USB Copy Button",
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_keys_platform_data qnap_ts409_button_data = {
+        .buttons        = qnap_ts409_buttons,
+        .nbuttons       = ARRAY_SIZE(qnap_ts409_buttons),
+};
+
+static struct platform_device qnap_ts409_button_device = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .num_resources  = 0,
+        .dev            = {
+                .platform_data  = &qnap_ts409_button_data,
+        },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode ts409_mpp_modes[] __initdata = {
+        {  0, MPP_UNUSED },
+        {  1, MPP_UNUSED },
+        {  2, MPP_UNUSED },
+        {  3, MPP_UNUSED },
+        {  4, MPP_GPIO },               /* HDD 1 status */
+        {  5, MPP_GPIO },               /* HDD 2 status */
+        {  6, MPP_GPIO },               /* HDD 3 status */
+        {  7, MPP_GPIO },               /* HDD 4 status */
+        {  8, MPP_UNUSED },
+        {  9, MPP_UNUSED },
+        { 10, MPP_GPIO },               /* RTC int */
+        { 11, MPP_UNUSED },
+        { 12, MPP_UNUSED },
+        { 13, MPP_UNUSED },
+        { 14, MPP_GPIO },               /* SW_RST */
+        { 15, MPP_GPIO },               /* USB copy button */
+        { 16, MPP_UART },               /* UART1 RXD */
+        { 17, MPP_UART },               /* UART1 TXD */
+        { 18, MPP_UNUSED },
+        { 19, MPP_UNUSED },
+        { -1 },
+};
+
+static void __init qnap_ts409_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        orion5x_mpp_conf(ts409_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
+                                 qnap_ts409_partitions[5].offset,
+                                 qnap_ts409_partitions[5].size);
+        orion5x_eth_init(&qnap_tsx09_eth_data);
+        orion5x_i2c_init();
+        orion5x_uart0_init();
+
+        orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
+                                   QNAP_TS409_NOR_BOOT_SIZE);
+        platform_device_register(&qnap_ts409_nor_flash);
+
+        platform_device_register(&qnap_ts409_button_device);
+
+        /* Get RTC IRQ and register the chip */
+        if (gpio_request(TS409_RTC_GPIO, "rtc") == 0) {
+                if (gpio_direction_input(TS409_RTC_GPIO) == 0)
+                        qnap_ts409_i2c_rtc.irq = gpio_to_irq(TS409_RTC_GPIO);
+                else
+                        gpio_free(TS409_RTC_GPIO);
+        }
+        if (qnap_ts409_i2c_rtc.irq == 0)
+                pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
+        i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+
+        /* register tsx09 specific power-off method */
+        pm_power_off = qnap_tsx09_power_off;
+}
+
+MACHINE_START(TS409, "QNAP TS-409")
+        /* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = qnap_ts409_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
new file mode 100644
index 000000000000..77e9f351f07a
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -0,0 +1,277 @@
+/*
+ * arch/arm/mach-orion5x/ts78xx-setup.c
+ *
+ * Maintainer: Alexander Clouter <alex@digriz.org.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/m48t86.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * TS-78xx Info
+ ****************************************************************************/
+
+/*
+ * FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE
+ */
+#define TS78XX_FPGA_REGS_PHYS_BASE      0xe8000000
+#define TS78XX_FPGA_REGS_VIRT_BASE      0xff900000
+#define TS78XX_FPGA_REGS_SIZE           SZ_1M
+
+#define TS78XX_FPGA_REGS_SYSCON_ID      (TS78XX_FPGA_REGS_VIRT_BASE | 0x000)
+#define TS78XX_FPGA_REGS_SYSCON_LCDI    (TS78XX_FPGA_REGS_VIRT_BASE | 0x004)
+#define TS78XX_FPGA_REGS_SYSCON_LCDO    (TS78XX_FPGA_REGS_VIRT_BASE | 0x008)
+
+#define TS78XX_FPGA_REGS_RTC_CTRL       (TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
+#define TS78XX_FPGA_REGS_RTC_DATA       (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
+
+/*
+ * 512kB NOR flash Device
+ */
+#define TS78XX_NOR_BOOT_BASE            0xff800000
+#define TS78XX_NOR_BOOT_SIZE            SZ_512K
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc ts78xx_io_desc[] __initdata = {
+        {
+                .virtual        = TS78XX_FPGA_REGS_VIRT_BASE,
+                .pfn            = __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE),
+                .length         = TS78XX_FPGA_REGS_SIZE,
+                .type           = MT_DEVICE,
+        },
+};
+
+void __init ts78xx_map_io(void)
+{
+        orion5x_map_io();
+        iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc));
+}
+
+/*****************************************************************************
+ * 512kB NOR Boot Flash - the chip is a M25P40
+ ****************************************************************************/
+static struct mtd_partition ts78xx_nor_boot_flash_resources[] = {
+        {
+                .name           = "ts-bootrom",
+                .offset         = 0,
+                /* only the first 256kB is used */
+                .size           = SZ_256K,
+                .mask_flags     = MTD_WRITEABLE,
+        },
+};
+
+static struct physmap_flash_data ts78xx_nor_boot_flash_data = {
+        .width          = 1,
+        .parts          = ts78xx_nor_boot_flash_resources,
+        .nr_parts       = ARRAY_SIZE(ts78xx_nor_boot_flash_resources),
+};
+
+static struct resource ts78xx_nor_boot_flash_resource = {
+        .flags          = IORESOURCE_MEM,
+        .start          = TS78XX_NOR_BOOT_BASE,
+        .end            = TS78XX_NOR_BOOT_BASE + TS78XX_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device ts78xx_nor_boot_flash = {
+        .name           = "physmap-flash",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &ts78xx_nor_boot_flash_data,
+        },
+        .num_resources  = 1,
+        .resource       = &ts78xx_nor_boot_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data ts78xx_eth_data = {
+        .phy_addr       = 0,
+        .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
+ ****************************************************************************/
+#ifdef CONFIG_RTC_DRV_M48T86
+static unsigned char ts78xx_rtc_readbyte(unsigned long addr)
+{
+        writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
+        return readb(TS78XX_FPGA_REGS_RTC_DATA);
+}
+
+static void ts78xx_rtc_writebyte(unsigned char value, unsigned long addr)
+{
+        writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
+        writeb(value, TS78XX_FPGA_REGS_RTC_DATA);
+}
+
+static struct m48t86_ops ts78xx_rtc_ops = {
+        .readbyte       = ts78xx_rtc_readbyte,
+        .writebyte      = ts78xx_rtc_writebyte,
+};
+
+static struct platform_device ts78xx_rtc_device = {
+        .name           = "rtc-m48t86",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &ts78xx_rtc_ops,
+        },
+        .num_resources  = 0,
+};
+
+/*
+ * TS uses some of the user storage space on the RTC chip so see if it is
+ * present; as it's an optional feature at purchase time and not all boards
+ * will have it present
+ *
+ * I've used the method TS use in their rtc7800.c example for the detection
+ *
+ * TODO: track down a guinea pig without an RTC to see if we can work out a
+ *              better RTC detection routine
+ */
+static int __init ts78xx_rtc_init(void)
+{
+        unsigned char tmp_rtc0, tmp_rtc1;
+
+        tmp_rtc0 = ts78xx_rtc_readbyte(126);
+        tmp_rtc1 = ts78xx_rtc_readbyte(127);
+
+        ts78xx_rtc_writebyte(0x00, 126);
+        ts78xx_rtc_writebyte(0x55, 127);
+        if (ts78xx_rtc_readbyte(127) == 0x55) {
+                ts78xx_rtc_writebyte(0xaa, 127);
+                if (ts78xx_rtc_readbyte(127) == 0xaa
+                                && ts78xx_rtc_readbyte(126) == 0x00) {
+                        ts78xx_rtc_writebyte(tmp_rtc0, 126);
+                        ts78xx_rtc_writebyte(tmp_rtc1, 127);
+                        platform_device_register(&ts78xx_rtc_device);
+                        return 1;
+                }
+        }
+
+        return 0;
+};
+#else
+static int __init ts78xx_rtc_init(void)
+{
+        return 0;
+}
+#endif
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ts78xx_sata_data = {
+        .n_ports        = 2,
+};
+
+/*****************************************************************************
+ * print some information regarding the board
+ ****************************************************************************/
+static void __init ts78xx_print_board_id(void)
+{
+        unsigned int board_info;
+
+        board_info = readl(TS78XX_FPGA_REGS_SYSCON_ID);
+        printk(KERN_INFO "TS-78xx Info: FPGA rev=%.2x, Board Magic=%.6x, ",
+                                board_info & 0xff,
+                                (board_info >> 8) & 0xffffff);
+        board_info = readl(TS78XX_FPGA_REGS_SYSCON_LCDI);
+        printk("JP1=%d, JP2=%d\n",
+                                (board_info >> 30) & 0x1,
+                                (board_info >> 31) & 0x1);
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = {
+        {  0, MPP_UNUSED },
+        {  1, MPP_GPIO },               /* JTAG Clock */
+        {  2, MPP_GPIO },               /* JTAG Data In */
+        {  3, MPP_GPIO },               /* Lat ECP2 256 FPGA - PB2B */
+        {  4, MPP_GPIO },               /* JTAG Data Out */
+        {  5, MPP_GPIO },               /* JTAG TMS */
+        {  6, MPP_GPIO },               /* Lat ECP2 256 FPGA - PB31A_CLK4+ */
+        {  7, MPP_GPIO },               /* Lat ECP2 256 FPGA - PB22B */
+        {  8, MPP_UNUSED },
+        {  9, MPP_UNUSED },
+        { 10, MPP_UNUSED },
+        { 11, MPP_UNUSED },
+        { 12, MPP_UNUSED },
+        { 13, MPP_UNUSED },
+        { 14, MPP_UNUSED },
+        { 15, MPP_UNUSED },
+        { 16, MPP_UART },
+        { 17, MPP_UART },
+        { 18, MPP_UART },
+        { 19, MPP_UART },
+        { -1 },
+};
+
+static void __init ts78xx_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        ts78xx_print_board_id();
+
+        orion5x_mpp_conf(ts78xx_mpp_modes);
+
+        /*
+         * MPP[20] PCI Clock Out 1
+         * MPP[21] PCI Clock Out 0
+         * MPP[22] Unused
+         * MPP[23] Unused
+         * MPP[24] Unused
+         * MPP[25] Unused
+         */
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_ehci1_init();
+        orion5x_eth_init(&ts78xx_eth_data);
+        orion5x_sata_init(&ts78xx_sata_data);
+        orion5x_uart0_init();
+        orion5x_uart1_init();
+
+        orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
+                                   TS78XX_NOR_BOOT_SIZE);
+        platform_device_register(&ts78xx_nor_boot_flash);
+
+        if (!ts78xx_rtc_init())
+                printk(KERN_INFO "TS-78xx RTC not detected or enabled\n");
+}
+
+MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
+        /* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = ts78xx_init,
+        .map_io         = ts78xx_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c
new file mode 100644
index 000000000000..83feac3147a6
--- /dev/null
+++ b/arch/arm/mach-orion5x/tsx09-common.c
@@ -0,0 +1,133 @@
+/*
+ * QNAP TS-x09 Boards common functions
+ *
+ * Maintainers: Lennert Buytenhek <buytenh@marvell.com>
+ *              Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/timex.h>
+#include <linux/serial_reg.h>
+#include "tsx09-common.h"
+
+/*****************************************************************************
+ * QNAP TS-x09 specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)    (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx09_power_off(void)
+{
+        /* 19200 baud divisor */
+        const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
+
+        pr_info("%s: triggering power-off...\n", __func__);
+
+        /* hijack uart1 and reset into sane state (19200,8n1) */
+        writel(0x83, UART1_REG(LCR));
+        writel(divisor & 0xff, UART1_REG(DLL));
+        writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+        writel(0x03, UART1_REG(LCR));
+        writel(0x00, UART1_REG(IER));
+        writel(0x00, UART1_REG(FCR));
+        writel(0x00, UART1_REG(MCR));
+
+        /* send the power-off command 'A' to PIC */
+        writel('A', UART1_REG(TX));
+}
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
+        .phy_addr       = 8,
+};
+
+static int __init qnap_tsx09_parse_hex_nibble(char n)
+{
+        if (n >= '0' && n <= '9')
+                return n - '0';
+
+        if (n >= 'A' && n <= 'F')
+                return n - 'A' + 10;
+
+        if (n >= 'a' && n <= 'f')
+                return n - 'a' + 10;
+
+        return -1;
+}
+
+static int __init qnap_tsx09_parse_hex_byte(const char *b)
+{
+        int hi;
+        int lo;
+
+        hi = qnap_tsx09_parse_hex_nibble(b[0]);
+        lo = qnap_tsx09_parse_hex_nibble(b[1]);
+
+        if (hi < 0 || lo < 0)
+                return -1;
+
+        return (hi << 4) | lo;
+}
+
+static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
+{
+        u_int8_t addr[6];
+        int i;
+
+        for (i = 0; i < 6; i++) {
+                int byte;
+
+                /*
+                 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
+                 */
+                if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
+                        return -1;
+
+                byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
+                if (byte < 0)
+                        return -1;
+                addr[i] = byte;
+        }
+
+        printk(KERN_INFO "tsx09: found ethernet mac address ");
+        for (i = 0; i < 6; i++)
+                printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+        memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
+
+        return 0;
+}
+
+/*
+ * The 'NAS Config' flash partition has an ext2 filesystem which
+ * contains a file that has the ethernet MAC address in plain text
+ * (format "xx:xx:xx:xx:xx:xx\n").
+ */
+void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
+{
+        unsigned long addr;
+
+        for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
+                char *nor_page;
+                int ret = 0;
+
+                nor_page = ioremap(addr, 1024);
+                if (nor_page != NULL) {
+                        ret = qnap_tsx09_check_mac_addr(nor_page);
+                        iounmap(nor_page);
+                }
+
+                if (ret == 0)
+                        break;
+        }
+}
diff --git a/arch/arm/mach-orion5x/tsx09-common.h b/arch/arm/mach-orion5x/tsx09-common.h
new file mode 100644
index 000000000000..0984264616f0
--- /dev/null
+++ b/arch/arm/mach-orion5x/tsx09-common.h
@@ -0,0 +1,20 @@
+#ifndef __ARCH_ORION5X_TSX09_COMMON_H
+#define __ARCH_ORION5X_TSX09_COMMON_H
+
+/*
+ * QNAP TS-x09 Boards power-off function
+ */
+extern void qnap_tsx09_power_off(void);
+
+/*
+ * QNAP TS-x09 Boards function to find Ethernet MAC address in flash memory
+ */
+extern void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size);
+
+/*
+ * QNAP TS-x09 Boards ethernet declaration
+ */
+extern struct mv643xx_eth_platform_data qnap_tsx09_eth_data;
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
new file mode 100644
index 000000000000..1af093ff8cf3
--- /dev/null
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/mach-orion5x/wnr854t-setup.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct orion5x_mpp_mode wnr854t_mpp_modes[] __initdata = {
+        {  0, MPP_GPIO },               /* Power LED green (0=on) */
+        {  1, MPP_GPIO },               /* Reset Button (0=off) */
+        {  2, MPP_GPIO },               /* Power LED blink (0=off) */
+        {  3, MPP_GPIO },               /* WAN Status LED amber (0=off) */
+        {  4, MPP_GPIO },               /* PCI int */
+        {  5, MPP_GPIO },               /* ??? */
+        {  6, MPP_GPIO },               /* ??? */
+        {  7, MPP_GPIO },               /* ??? */
+        {  8, MPP_UNUSED },             /* ??? */
+        {  9, MPP_GIGE },               /* GE_RXERR */
+        { 10, MPP_UNUSED },             /* ??? */
+        { 11, MPP_UNUSED },             /* ??? */
+        { 12, MPP_GIGE },               /* GE_TXD[4] */
+        { 13, MPP_GIGE },               /* GE_TXD[5] */
+        { 14, MPP_GIGE },               /* GE_TXD[6] */
+        { 15, MPP_GIGE },               /* GE_TXD[7] */
+        { 16, MPP_GIGE },               /* GE_RXD[4] */
+        { 17, MPP_GIGE },               /* GE_RXD[5] */
+        { 18, MPP_GIGE },               /* GE_RXD[6] */
+        { 19, MPP_GIGE },               /* GE_RXD[7] */
+        { -1 },
+};
+
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define WNR854T_NOR_BOOT_BASE   0xf4000000
+#define WNR854T_NOR_BOOT_SIZE   SZ_8M
+
+static struct mtd_partition wnr854t_nor_flash_partitions[] = {
+        {
+                .name           = "kernel",
+                .offset         = 0x00000000,
+                .size           = 0x00100000,
+        }, {
+                .name           = "rootfs",
+                .offset         = 0x00100000,
+                .size           = 0x00660000,
+        }, {
+                .name           = "uboot",
+                .offset         = 0x00760000,
+                .size           = 0x00040000,
+        },
+};
+
+static struct physmap_flash_data wnr854t_nor_flash_data = {
+        .width          = 2,
+        .parts          = wnr854t_nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(wnr854t_nor_flash_partitions),
+};
+
+static struct resource wnr854t_nor_flash_resource = {
+        .flags          = IORESOURCE_MEM,
+        .start          = WNR854T_NOR_BOOT_BASE,
+        .end            = WNR854T_NOR_BOOT_BASE + WNR854T_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device wnr854t_nor_flash = {
+        .name                   = "physmap-flash",
+        .id                     = 0,
+        .dev            = {
+                .platform_data  = &wnr854t_nor_flash_data,
+        },
+        .num_resources          = 1,
+        .resource               = &wnr854t_nor_flash_resource,
+};
+
+static struct mv643xx_eth_platform_data wnr854t_eth_data = {
+        .phy_addr       = -1,
+};
+
+static void __init wnr854t_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        orion5x_mpp_conf(wnr854t_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_eth_init(&wnr854t_eth_data);
+        orion5x_uart0_init();
+
+        orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
+                                   WNR854T_NOR_BOOT_SIZE);
+        platform_device_register(&wnr854t_nor_flash);
+}
+
+static int __init wnr854t_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        int irq;
+
+        /*
+         * Check for devices with hard-wired IRQs.
+         */
+        irq = orion5x_pci_map_irq(dev, slot, pin);
+        if (irq != -1)
+                return irq;
+
+        /*
+         * Mini-PCI slot.
+         */
+        if (slot == 7)
+                return gpio_to_irq(4);
+
+        return -1;
+}
+
+static struct hw_pci wnr854t_pci __initdata = {
+        .nr_controllers = 2,
+        .swizzle        = pci_std_swizzle,
+        .setup          = orion5x_pci_sys_setup,
+        .scan           = orion5x_pci_sys_scan_bus,
+        .map_irq        = wnr854t_pci_map_irq,
+};
+
+static int __init wnr854t_pci_init(void)
+{
+        if (machine_is_wnr854t())
+                pci_common_init(&wnr854t_pci);
+
+        return 0;
+}
+subsys_initcall(wnr854t_pci_init);
+
+MACHINE_START(WNR854T, "Netgear WNR854T")
+        /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = wnr854t_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
new file mode 100644
index 000000000000..aeab55c6a82d
--- /dev/null
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-orion5x/wrt350n-v2-setup.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
+        {  0, MPP_GPIO },               /* Power LED green (0=on) */
+        {  1, MPP_GPIO },               /* Security LED (0=on) */
+        {  2, MPP_GPIO },               /* Internal Button (0=on) */
+        {  3, MPP_GPIO },               /* Reset Button (0=on) */
+        {  4, MPP_GPIO },               /* PCI int */
+        {  5, MPP_GPIO },               /* Power LED orange (0=on) */
+        {  6, MPP_GPIO },               /* USB LED (0=on) */
+        {  7, MPP_GPIO },               /* Wireless LED (0=on) */
+        {  8, MPP_UNUSED },             /* ??? */
+        {  9, MPP_GIGE },               /* GE_RXERR */
+        { 10, MPP_UNUSED },             /* ??? */
+        { 11, MPP_UNUSED },             /* ??? */
+        { 12, MPP_GIGE },               /* GE_TXD[4] */
+        { 13, MPP_GIGE },               /* GE_TXD[5] */
+        { 14, MPP_GIGE },               /* GE_TXD[6] */
+        { 15, MPP_GIGE },               /* GE_TXD[7] */
+        { 16, MPP_GIGE },               /* GE_RXD[4] */
+        { 17, MPP_GIGE },               /* GE_RXD[5] */
+        { 18, MPP_GIGE },               /* GE_RXD[6] */
+        { 19, MPP_GIGE },               /* GE_RXD[7] */
+        { -1 },
+};
+
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define WRT350N_V2_NOR_BOOT_BASE        0xf4000000
+#define WRT350N_V2_NOR_BOOT_SIZE        SZ_8M
+
+static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = {
+        {
+                .name           = "kernel",
+                .offset         = 0x00000000,
+                .size           = 0x00760000,
+        }, {
+                .name           = "rootfs",
+                .offset         = 0x001a0000,
+                .size           = 0x005c0000,
+        }, {
+                .name           = "lang",
+                .offset         = 0x00760000,
+                .size           = 0x00040000,
+        }, {
+                .name           = "nvram",
+                .offset         = 0x007a0000,
+                .size           = 0x00020000,
+        }, {
+                .name           = "u-boot",
+                .offset         = 0x007c0000,
+                .size           = 0x00040000,
+        },
+};
+
+static struct physmap_flash_data wrt350n_v2_nor_flash_data = {
+        .width          = 1,
+        .parts          = wrt350n_v2_nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(wrt350n_v2_nor_flash_partitions),
+};
+
+static struct resource wrt350n_v2_nor_flash_resource = {
+        .flags          = IORESOURCE_MEM,
+        .start          = WRT350N_V2_NOR_BOOT_BASE,
+        .end            = WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device wrt350n_v2_nor_flash = {
+        .name                   = "physmap-flash",
+        .id                     = 0,
+        .dev            = {
+                .platform_data  = &wrt350n_v2_nor_flash_data,
+        },
+        .num_resources          = 1,
+        .resource               = &wrt350n_v2_nor_flash_resource,
+};
+
+static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
+        .phy_addr       = -1,
+};
+
+static void __init wrt350n_v2_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        orion5x_mpp_conf(wrt350n_v2_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_eth_init(&wrt350n_v2_eth_data);
+        orion5x_uart0_init();
+
+        orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
+                                   WRT350N_V2_NOR_BOOT_SIZE);
+        platform_device_register(&wrt350n_v2_nor_flash);
+}
+
+static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        int irq;
+
+        /*
+         * Check for devices with hard-wired IRQs.
+         */
+        irq = orion5x_pci_map_irq(dev, slot, pin);
+        if (irq != -1)
+                return irq;
+
+        /*
+         * Mini-PCI slot.
+         */
+        if (slot == 7)
+                return gpio_to_irq(4);
+
+        return -1;
+}
+
+static struct hw_pci wrt350n_v2_pci __initdata = {
+        .nr_controllers = 2,
+        .swizzle        = pci_std_swizzle,
+        .setup          = orion5x_pci_sys_setup,
+        .scan           = orion5x_pci_sys_scan_bus,
+        .map_irq        = wrt350n_v2_pci_map_irq,
+};
+
+static int __init wrt350n_v2_pci_init(void)
+{
+        if (machine_is_wrt350n_v2())
+                pci_common_init(&wrt350n_v2_pci);
+
+        return 0;
+}
+subsys_initcall(wrt350n_v2_pci_init);
+
+MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
+        /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = wrt350n_v2_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 5da7a6820492..e8ee7ec9ff6d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,19 +16,24 @@ config CPU_PXA310
 config CPU_PXA320
         bool "PXA320 (codename Monahans-P)"
 
+config CPU_PXA930
+        bool "PXA930 (codename Tavor-P)"
+
 endmenu
 
 endif
 
-choice
-        prompt "Select target board"
-
 config ARCH_GUMSTIX
         bool "Gumstix XScale boards"
         help
           Say Y here if you intend to run this kernel on a
           Gumstix Full Function Minature Computer.
 
+config MACH_GUMSTIX_F
+        bool "Basix, Connex, ws-200ax, ws-400ax systems"
+        depends on ARCH_GUMSTIX
+        select PXA25x
+
 config ARCH_LUBBOCK
         bool "Intel DBPXA250 Development Platform"
         select PXA25x
@@ -37,10 +42,12 @@ config ARCH_LUBBOCK
 config MACH_LOGICPD_PXA270
         bool "LogicPD PXA270 Card Engine Development Platform"
         select PXA27x
+        select HAVE_PWM
 
 config MACH_MAINSTONE
         bool "Intel HCDDBBVA0 Development Platform"
         select PXA27x
+        select HAVE_PWM
 
 config ARCH_PXA_IDP
         bool "Accelent Xscale IDP"
@@ -57,6 +64,57 @@ config PXA_SHARPSL
           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
           handheld computer.
 
+config MACH_POODLE
+        bool "Enable Sharp SL-5600 (Poodle) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select SHARP_LOCOMO
+        select PXA_SSP
+
+config MACH_CORGI
+        bool "Enable Sharp SL-C700 (Corgi) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+        bool "Enable Sharp SL-C750 (Shepherd) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+        bool "Enable Sharp SL-C760 (Husky) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select PXA_SHARP_C7xx
+
+config MACH_AKITA
+        bool "Enable Sharp SL-1000 (Akita) Support"
+        depends on PXA_SHARPSL
+        select PXA27x
+        select PXA_SHARP_Cxx00
+        select MACH_SPITZ
+        select I2C
+        select I2C_PXA
+
+config MACH_SPITZ
+        bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+        depends on PXA_SHARPSL
+        select PXA27x
+        select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+        bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+        depends on PXA_SHARPSL
+        select PXA27x
+        select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+        bool "Enable Sharp SL-6000x (Tosa) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+
 config ARCH_PXA_ESERIES
         bool "PXA based Toshiba e-series PDAs"
         select PXA25x
@@ -69,10 +127,19 @@ config MACH_E330
           Say Y here if you intend to run this kernel on a Toshiba
           e330 family PDA.
 
+config MACH_E350
+        bool "Toshiba e350"
+        default y
+        depends on ARCH_PXA_ESERIES
+        help
+          Say Y here if you intend to run this kernel on a Toshiba
+          e350 family PDA.
+
 config MACH_E740
         bool "Toshiba e740"
         default y
         depends on ARCH_PXA_ESERIES
+        select FB_W100
         help
           Say Y here if you intend to run this kernel on a Toshiba
           e740 family PDA.
@@ -81,6 +148,7 @@ config MACH_E750
         bool "Toshiba e750"
         default y
         depends on ARCH_PXA_ESERIES
+        select FB_W100
         help
           Say Y here if you intend to run this kernel on a Toshiba
           e750 family PDA.
@@ -97,6 +165,7 @@ config MACH_E800
         bool "Toshiba e800"
         default y
         depends on ARCH_PXA_ESERIES
+        select FB_W100
         help
           Say Y here if you intend to run this kernel on a Toshiba
           e800 family PDA.
@@ -105,6 +174,10 @@ config MACH_TRIZEPS4
         bool "Keith und Koep Trizeps4 DIMM-Module"
         select PXA27x
 
+config MACH_TRIZEPS4_CONXS
+        bool "ConXS Eval Board"
+        depends on MACH_TRIZEPS4
+
 config MACH_EM_X270
         bool "CompuLab EM-x270 platform"
         select PXA27x
@@ -114,14 +187,25 @@ config MACH_COLIBRI
         select PXA27x
 
 config MACH_ZYLONITE
-        bool "PXA3xx Development Platform"
+        bool "PXA3xx Development Platform (aka Zylonite)"
         select PXA3xx
+        select HAVE_PWM
 
 config MACH_LITTLETON
         bool "PXA3xx Form Factor Platform (aka Littleton)"
         select PXA3xx
         select PXA_SSP
 
+config MACH_TAVOREVB
+        bool "PXA930 Evaluation Board (aka TavorEVB)"
+        select PXA3xx
+        select PXA930
+
+config MACH_SAAR
+        bool "PXA930 Handheld Platform (aka SAAR)"
+        select PXA3xx
+        select PXA930
+
 config MACH_ARMCORE
         bool "CompuLab CM-X270 modules"
         select PXA27x
@@ -129,7 +213,6 @@ config MACH_ARMCORE
 
 config MACH_MAGICIAN
         bool "Enable HTC Magician Support"
-        depends on ARCH_PXA
         select PXA27x
         select IWMMXT
 
@@ -137,109 +220,81 @@ config MACH_PCM027
         bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
         select PXA27x
         select IWMMXT
+        select PXA_SSP
 
-endchoice
+config ARCH_PXA_PALM
+        bool "PXA based Palm PDAs"
+        select HAVE_PWM
 
-choice
-        prompt "Used baseboard"
-        depends on MACH_PCM027
+config MACH_PALMTX
+        bool "Palm T|X"
+        default y
+        depends on ARCH_PXA_PALM
+        select PXA27x
+        select IWMMXT
+        help
+          Say Y here if you intend to run this kernel on a Palm T|X
+          handheld computer.
 
 config MACH_PCM990_BASEBOARD
         bool "PHYTEC PCM-990 development board"
-
-endchoice
-
-if PXA_SHARPSL
+        select HAVE_PWM
+        depends on MACH_PCM027
 
 choice
-        prompt "Select target Sharp Zaurus device range"
-
-config PXA_SHARPSL_25x
-        bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)"
-        select PXA25x
-
-config PXA_SHARPSL_27x
-        bool "Sharp PXA270 models (SL-Cxx00)"
-        select PXA27x
-
-endchoice
+        prompt "display on pcm990"
+        depends on MACH_PCM990_BASEBOARD
 
-endif
+config PCM990_DISPLAY_SHARP
+        bool "sharp lq084v1dg21 stn display"
 
-if ARCH_GUMSTIX
+config PCM990_DISPLAY_NEC
+        bool "nec nl6448bc20_18d tft display"
 
-choice
-        prompt "Select target Gumstix board"
-
-config MACH_GUMSTIX_F
-        bool "Basix, Connex, ws-200ax, ws-400ax systems"
-        select PXA25x
+config PCM990_DISPLAY_NONE
+        bool "no display"
 
 endchoice
 
-endif
 
+config PXA_EZX
+        bool "Motorola EZX Platform"
+        select PXA27x
+        select IWMMXT
+        select HAVE_PWM
 
-if MACH_TRIZEPS4
+config MACH_EZX_A780
+        bool "Motorola EZX A780"
+        default y
+        depends on PXA_EZX
 
-choice
-        prompt "Select base board for Trizeps 4 module"
+config MACH_EZX_E680
+        bool "Motorola EZX E680"
+        default y
+        depends on PXA_EZX
 
-config MACH_TRIZEPS4_CONXS
-        bool "ConXS Eval Board"
+config MACH_EZX_A1200
+        bool "Motorola EZX A1200"
+        default y
+        depends on PXA_EZX
 
-config MACH_TRIZEPS4_ANY
-        bool "another Board"
+config MACH_EZX_A910
+        bool "Motorola EZX A910"
+        default y
+        depends on PXA_EZX
 
-endchoice
+config MACH_EZX_E6
+        bool "Motorola EZX E6"
+        default y
+        depends on PXA_EZX
 
-endif
+config MACH_EZX_E2
+        bool "Motorola EZX E2"
+        default y
+        depends on PXA_EZX
 
 endmenu
 
-config MACH_POODLE
-        bool "Enable Sharp SL-5600 (Poodle) Support"
-        depends on PXA_SHARPSL_25x
-        select SHARP_LOCOMO
-        select PXA_SSP
-
-config MACH_CORGI
-        bool "Enable Sharp SL-C700 (Corgi) Support"
-        depends on PXA_SHARPSL_25x
-        select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-        bool "Enable Sharp SL-C750 (Shepherd) Support"
-        depends on PXA_SHARPSL_25x
-        select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-        bool "Enable Sharp SL-C760 (Husky) Support"
-        depends on PXA_SHARPSL_25x
-        select PXA_SHARP_C7xx
-
-config MACH_AKITA
-        bool "Enable Sharp SL-1000 (Akita) Support"
-        depends on PXA_SHARPSL_27x
-        select PXA_SHARP_Cxx00
-        select MACH_SPITZ
-        select I2C
-        select I2C_PXA
-
-config MACH_SPITZ
-        bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-        depends on PXA_SHARPSL_27x
-        select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-        bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-        depends on PXA_SHARPSL_27x
-        select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-        bool "Enable Sharp SL-6000x (Tosa) Support"
-        depends on PXA_SHARPSL_25x
-
 config PXA25x
         bool
         help
@@ -273,4 +328,19 @@ config PXA_SSP
         tristate
         help
           Enable support for PXA2xx SSP ports
+
+config PXA_PWM
+        tristate
+        default BACKLIGHT_PWM
+        help
+          Enable support for PXA2xx/PXA3xx PWM controllers
+
+config TOSA_BT
+        tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+        depends on MACH_TOSA
+        select RFKILL
+        help
+          This is a simple driver that is able to control
+          the state of built in bluetooth chip on tosa.
+
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0e6d05bb81aa..99ecbe7f8506 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -4,19 +4,21 @@
 
 # Common support (must be linked before board specific support)
 obj-y                           += clock.o devices.o generic.o irq.o dma.o \
-                                   time.o gpio.o
+                                   time.o gpio.o reset.o
 obj-$(CONFIG_PM)                += pm.o sleep.o standby.o
 obj-$(CONFIG_CPU_FREQ)          += cpu-pxa.o
 
 # Generic drivers that other drivers may depend upon
 obj-$(CONFIG_PXA_SSP)           += ssp.o
+obj-$(CONFIG_PXA_PWM)           += pwm.o
 
 # SoC-specific code
-obj-$(CONFIG_PXA25x)            += mfp-pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x)            += mfp-pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA25x)            += mfp-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x)            += mfp-pxa2xx.o pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)            += mfp-pxa3xx.o pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)        += pxa300.o
 obj-$(CONFIG_CPU_PXA320)        += pxa320.o
+obj-$(CONFIG_CPU_PXA930)        += pxa930.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)      += gumstix.o
@@ -35,7 +37,12 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)         += tosa.o
 obj-$(CONFIG_MACH_EM_X270)      += em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)     += magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)  += eseries.o
+obj-$(CONFIG_ARCH_PXA_ESERIES)  += eseries.o eseries_udc.o
+obj-$(CONFIG_MACH_E740)         += e740_lcd.o
+obj-$(CONFIG_MACH_E750)         += e750_lcd.o
+obj-$(CONFIG_MACH_E400)         += e400_lcd.o
+obj-$(CONFIG_MACH_E800)         += e800_lcd.o
+obj-$(CONFIG_MACH_PALMTX)       += palmtx.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y                         += zylonite.o
@@ -43,8 +50,11 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-$(CONFIG_CPU_PXA320)      += zylonite_pxa320.o
 endif
 obj-$(CONFIG_MACH_LITTLETON)    += littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)     += tavorevb.o
+obj-$(CONFIG_MACH_SAAR)         += saar.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -58,3 +68,5 @@ obj-$(CONFIG_LEDS)		+= $(led-y)
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif
+
+obj-$(CONFIG_TOSA_BT)           += tosa-bt.o
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index e97dc59813c8..630063ffa6fc 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,7 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 #include <asm/hardware.h>
 
@@ -47,6 +47,9 @@ struct clk *clk_get(struct device *dev, const char *id)
                 clk = p;
         mutex_unlock(&clocks_mutex);
 
+        if (!IS_ERR(clk) && clk->ops == NULL)
+                clk = clk->other;
+
         return clk;
 }
 EXPORT_SYMBOL(clk_get);
@@ -98,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
 EXPORT_SYMBOL(clk_get_rate);
 
 
-static void clk_gpio27_enable(struct clk *clk)
-{
-        pxa_gpio_mode(GPIO11_3_6MHz_MD);
-}
-
-static void clk_gpio27_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_gpio27_ops = {
-        .enable         = clk_gpio27_enable,
-        .disable        = clk_gpio27_disable,
-};
-
-
 void clk_cken_enable(struct clk *clk)
 {
         CKEN |= 1 << clk->cken;
@@ -128,14 +116,6 @@ const struct clkops clk_cken_ops = {
         .disable        = clk_cken_disable,
 };
 
-static struct clk common_clks[] = {
-        {
-                .name           = "GPIO27_CLK",
-                .ops            = &clk_gpio27_ops,
-                .rate           = 3686400,
-        },
-};
-
 void clks_register(struct clk *clks, size_t num)
 {
         int i;
@@ -145,10 +125,3 @@ void clks_register(struct clk *clks, size_t num)
                 list_add(&clks[i].node, &clocks);
         mutex_unlock(&clocks_mutex);
 }
-
-static int __init clk_init(void)
-{
-        clks_register(common_clks, ARRAY_SIZE(common_clks));
-        return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index bc6b77e1592e..1ec8f9178aaf 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -15,6 +15,7 @@ struct clk {
         unsigned int            cken;
         unsigned int            delay;
         unsigned int            enabled;
+        struct clk              *other;
 };
 
 #define INIT_CKEN(_name, _cken, _rate, _delay, _dev)    \
@@ -35,9 +36,53 @@ struct clk {
                 .cken   = CKEN_##_cken,                 \
         }
 
+/*
+ * This is a placeholder to alias one clock device+name pair
+ * to another struct clk.
+ */
+#define INIT_CKOTHER(_name, _other, _dev)               \
+        {                                               \
+                .name   = _name,                        \
+                .dev    = _dev,                         \
+                .other  = _other,                       \
+        }
+
+#define INIT_CLK(_name, _ops, _rate, _delay, _dev)      \
+        {                                               \
+                .name   = _name,                        \
+                .dev    = _dev,                         \
+                .ops    = _ops,                         \
+                .rate   = _rate,                        \
+                .delay  = _delay,                       \
+        }
+
 extern const struct clkops clk_cken_ops;
 
 void clk_cken_enable(struct clk *clk);
 void clk_cken_disable(struct clk *clk);
 
+#ifdef CONFIG_PXA3xx
+#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)  \
+        {                                               \
+                .name   = _name,                        \
+                .dev    = _dev,                         \
+                .ops    = &clk_pxa3xx_cken_ops,         \
+                .rate   = _rate,                        \
+                .cken   = CKEN_##_cken,                 \
+                .delay  = _delay,                       \
+        }
+
+#define PXA3xx_CK(_name, _cken, _ops, _dev)             \
+        {                                               \
+                .name   = _name,                        \
+                .dev    = _dev,                         \
+                .ops    = _ops,                         \
+                .cken   = CKEN_##_cken,                 \
+        }
+
+extern const struct clkops clk_pxa3xx_cken_ops;
+extern void clk_pxa3xx_cken_enable(struct clk *);
+extern void clk_pxa3xx_cken_disable(struct clk *);
+#endif
+
 void clks_register(struct clk *clks, size_t num);
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index ac7f05f9f3eb..bcf0cde6ccc9 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -5,7 +5,7 @@
  *
  * Bits taken from various places.
  *
- * Copyright (C) 2007 Compulab, Ltd.
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,16 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <asm/arch/cm-x270.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
 
-unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+unsigned long it8152_base_address;
+static int cmx270_it8152_irq_gpio;
 
 /*
  * Only first 64MB of memory can be accessed via PCI.
@@ -41,36 +41,39 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 {
         unsigned int sz = SZ_64M >> PAGE_SHIFT;
 
-        pr_info("Adjusting zones for CM-x270\n");
+        if (machine_is_armcore()) {
+                pr_info("Adjusting zones for CM-X270\n");
 
-        /*
-         * Only adjust if > 64M on current system
-         */
-        if (node || (zone_size[0] <= sz))
-                return;
-
-        zone_size[1] = zone_size[0] - sz;
-        zone_size[0] = sz;
-        zhole_size[1] = zhole_size[0];
-        zhole_size[0] = 0;
+                /*
+                 * Only adjust if > 64M on current system
+                 */
+                if (node || (zone_size[0] <= sz))
+                        return;
+
+                zone_size[1] = zone_size[0] - sz;
+                zone_size[0] = sz;
+                zhole_size[1] = zhole_size[0];
+                zhole_size[0] = 0;
+        }
 }
 
 static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
         /* clear our parent irq */
-        GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+        GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
 
         it8152_irq_demux(irq, desc);
 }
 
-void __cmx270_pci_init_irq(void)
+void __cmx270_pci_init_irq(int irq_gpio)
 {
         it8152_init_irq();
-        pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
-        set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
 
-        set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
-                                cmx270_it8152_irq_demux);
+        cmx270_it8152_irq_gpio = irq_gpio;
+
+        set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING);
+
+        set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
 }
 
 #ifdef CONFIG_PM
@@ -113,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
         /*
           Here comes the ugly part. The routing is baseboard specific,
-          but defining a platform for each possible base of CM-x270 is
-          unrealistic. Here we keep mapping for ATXBase and SB-x270.
+          but defining a platform for each possible base of CM-X270 is
+          unrealistic. Here we keep mapping for ATXBase and SB-X270.
         */
         /* ATXBASE PCI slot */
         if (slot == 7)
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
index ffe37b66f9a0..48f532f4cb51 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ b/arch/arm/mach-pxa/cm-x270-pci.h
@@ -1,13 +1,13 @@
-extern void __cmx270_pci_init_irq(void);
+extern void __cmx270_pci_init_irq(int irq_gpio);
 extern void __cmx270_pci_suspend(void);
 extern void __cmx270_pci_resume(void);
 
 #ifdef CONFIG_PCI
-#define cmx270_pci_init_irq __cmx270_pci_init_irq
-#define cmx270_pci_suspend __cmx270_pci_suspend
-#define cmx270_pci_resume __cmx270_pci_resume
+#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
+#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
+#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
 #else
-#define cmx270_pci_init_irq() do {} while (0)
-#define cmx270_pci_suspend() do {} while (0)
-#define cmx270_pci_resume() do {} while (0)
+#define cmx270_pci_init_irq(x) do {} while (0)
+#define cmx270_pci_suspend(x) do {} while (0)
+#define cmx270_pci_resume(x) do {} while (0)
 #endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index f5851d1adc25..402e807eae54 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-pxa/cm-x270.c
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -9,43 +9,156 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/types.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
 #include <linux/platform_device.h>
-#include <linux/irq.h>
 #include <linux/sysdev.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-#include <linux/serial_8250.h>
-
 #include <video/mbxfb.h>
+#include <linux/leds.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/bitfield.h>
-#include <asm/arch/cm-x270.h>
 
 #include <asm/hardware/it8152.h>
 
 #include "generic.h"
 #include "cm-x270-pci.h"
 
+/* virtual addresses for statically mapped regions */
+#define CMX270_VIRT_BASE        (0xe8000000)
+#define CMX270_IT8152_VIRT      (CMX270_VIRT_BASE)
+
 #define RTC_PHYS_BASE           (PXA_CS1_PHYS + (5 << 22))
 #define DM9000_PHYS_BASE        (PXA_CS1_PHYS + (6 << 22))
 
-static struct resource cmx270_dm9k_resource[] = {
+/* GPIO IRQ usage */
+#define GPIO10_ETHIRQ           (10)
+#define GPIO22_IT8152_IRQ       (22)
+#define GPIO83_MMC_IRQ          (83)
+#define GPIO95_GFXIRQ           (95)
+
+#define CMX270_ETHIRQ           IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX270_IT8152_IRQ       IRQ_GPIO(GPIO22_IT8152_IRQ)
+#define CMX270_MMC_IRQ          IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_GFXIRQ           IRQ_GPIO(GPIO95_GFXIRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER       (105)
+
+static unsigned long cmx270_pin_config[] = {
+        /* AC'97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+        GPIO98_AC97_SYSCLK,
+        GPIO113_AC97_nRESET,
+
+        /* BTUART */
+        GPIO42_BTUART_RXD,
+        GPIO43_BTUART_TXD,
+        GPIO44_BTUART_CTS,
+        GPIO45_BTUART_RTS,
+
+        /* STUART */
+        GPIO46_STUART_RXD,
+        GPIO47_STUART_TXD,
+
+        /* MCI controller */
+        GPIO32_MMC_CLK,
+        GPIO112_MMC_CMD,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+
+        /* LCD */
+        GPIO58_LCD_LDD_0,
+        GPIO59_LCD_LDD_1,
+        GPIO60_LCD_LDD_2,
+        GPIO61_LCD_LDD_3,
+        GPIO62_LCD_LDD_4,
+        GPIO63_LCD_LDD_5,
+        GPIO64_LCD_LDD_6,
+        GPIO65_LCD_LDD_7,
+        GPIO66_LCD_LDD_8,
+        GPIO67_LCD_LDD_9,
+        GPIO68_LCD_LDD_10,
+        GPIO69_LCD_LDD_11,
+        GPIO70_LCD_LDD_12,
+        GPIO71_LCD_LDD_13,
+        GPIO72_LCD_LDD_14,
+        GPIO73_LCD_LDD_15,
+        GPIO74_LCD_FCLK,
+        GPIO75_LCD_LCLK,
+        GPIO76_LCD_PCLK,
+        GPIO77_LCD_BIAS,
+
+        /* I2C */
+        GPIO117_I2C_SCL,
+        GPIO118_I2C_SDA,
+
+        /* SSP1 */
+        GPIO23_SSP1_SCLK,
+        GPIO24_SSP1_SFRM,
+        GPIO25_SSP1_TXD,
+        GPIO26_SSP1_RXD,
+
+        /* SSP2 */
+        GPIO19_SSP2_SCLK,
+        GPIO14_SSP2_SFRM,
+        GPIO87_SSP2_TXD,
+        GPIO88_SSP2_RXD,
+
+        /* PC Card */
+        GPIO48_nPOE,
+        GPIO49_nPWE,
+        GPIO50_nPIOR,
+        GPIO51_nPIOW,
+        GPIO85_nPCE_1,
+        GPIO54_nPCE_2,
+        GPIO55_nPREG,
+        GPIO56_nPWAIT,
+        GPIO57_nIOIS16,
+
+        /* SDRAM and local bus */
+        GPIO15_nCS_1,
+        GPIO78_nCS_2,
+        GPIO79_nCS_3,
+        GPIO80_nCS_4,
+        GPIO33_nCS_5,
+        GPIO49_nPWE,
+        GPIO18_RDY,
+
+        /* GPIO */
+        GPIO0_GPIO      | WAKEUP_ON_EDGE_BOTH,
+        GPIO105_GPIO    | MFP_LPM_DRIVE_HIGH,   /* MMC/SD power */
+        GPIO53_GPIO,                            /* PC card reset */
+
+        /* NAND controls */
+        GPIO11_GPIO     | MFP_LPM_DRIVE_HIGH,   /* NAND CE# */
+        GPIO89_GPIO,                            /* NAND Ready/Busy */
+
+        /* interrupts */
+        GPIO10_GPIO,    /* DM9000 interrupt */
+        GPIO83_GPIO,    /* MMC card detect */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx270_dm9000_resource[] = {
         [0] = {
                 .start = DM9000_PHYS_BASE,
                 .end   = DM9000_PHYS_BASE + 4,
@@ -63,37 +176,45 @@ static struct resource cmx270_dm9k_resource[] = {
         }
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data cmx270_dm9k_platdata = {
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
         .flags          = DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device cmx270_device_dm9k = {
+static struct platform_device cmx270_dm9000_device = {
         .name           = "dm9000",
         .id             = 0,
-        .num_resources  = ARRAY_SIZE(cmx270_dm9k_resource),
-        .resource       = cmx270_dm9k_resource,
+        .num_resources  = ARRAY_SIZE(cmx270_dm9000_resource),
+        .resource       = cmx270_dm9000_resource,
         .dev            = {
-                .platform_data = &cmx270_dm9k_platdata,
+                .platform_data = &cmx270_dm9000_platdata,
         }
 };
 
-/* audio device */
-static struct platform_device cmx270_audio_device = {
-        .name           = "pxa2xx-ac97",
-        .id             = -1,
-};
+static void __init cmx270_init_dm9000(void)
+{
+        platform_device_register(&cmx270_dm9000_device);
+}
+#else
+static inline void cmx270_init_dm9000(void) {}
+#endif
 
-/* touchscreen controller */
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
 static struct platform_device cmx270_ts_device = {
         .name           = "ucb1400_ts",
         .id             = -1,
 };
 
-/* RTC */
+static void __init cmx270_init_touchscreen(void)
+{
+        platform_device_register(&cmx270_ts_device);
+}
+#else
+static inline void cmx270_init_touchscreen(void) {}
+#endif
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource cmx270_v3020_resource[] = {
         [0] = {
                 .start = RTC_PHYS_BASE,
@@ -116,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
         }
 };
 
-/*
- * CM-X270 LEDs
- */
+static void __init cmx270_init_rtc(void)
+{
+        platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx270_init_rtc(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx270_leds[] = {
+        [0] = {
+                .name = "cm-x270:red",
+                .default_trigger = "nand-disk",
+                .gpio = 93,
+                .active_low = 1,
+        },
+        [1] = {
+                .name = "cm-x270:green",
+                .default_trigger = "heartbeat",
+                .gpio = 94,
+                .active_low = 1,
+        },
+};
+
+static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
+        .num_leds = ARRAY_SIZE(cmx270_leds),
+        .leds = cmx270_leds,
+};
+
 static struct platform_device cmx270_led_device = {
-        .name           = "cm-x270-led",
+        .name           = "leds-gpio",
         .id             = -1,
+        .dev            = {
+                .platform_data = &cmx270_gpio_led_pdata,
+        },
 };
 
+static void __init cmx270_init_leds(void)
+{
+        platform_device_register(&cmx270_led_device);
+}
+#else
+static inline void cmx270_init_leds(void) {}
+#endif
+
 /* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
 static u64 fb_dma_mask = ~(u64)0;
 
 static struct resource cmx270_2700G_resource[] = {
         /* frame buffer memory including ODFB and External SDRAM */
         [0] = {
-                .start = MARATHON_PHYS,
-                .end   = MARATHON_PHYS + 0x02000000,
+                .start = PXA_CS2_PHYS,
+                .end   = PXA_CS2_PHYS + 0x01ffffff,
                 .flags = IORESOURCE_MEM,
         },
         /* Marathon registers */
         [1] = {
-                .start = MARATHON_PHYS + 0x03fe0000,
-                .end   = MARATHON_PHYS + 0x03ffffff,
+                .start = PXA_CS2_PHYS + 0x03fe0000,
+                .end   = PXA_CS2_PHYS + 0x03ffffff,
                 .flags = IORESOURCE_MEM,
         },
 };
@@ -205,44 +365,15 @@ static struct platform_device cmx270_2700G = {
         .id             = -1,
 };
 
-static u64 ata_dma_mask = ~(u64)0;
-
-static struct platform_device cmx270_ata = {
-        .name = "pata_cm_x270",
-        .id = -1,
-        .dev            = {
-                .dma_mask       = &ata_dma_mask,
-                .coherent_dma_mask = 0xffffffff,
-        },
-};
-
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-        &cmx270_device_dm9k,
-        &cmx270_audio_device,
-        &cmx270_rtc_device,
-        &cmx270_2700G,
-        &cmx270_led_device,
-        &cmx270_ts_device,
-        &cmx270_ata,
-};
-
-/* Map PCI companion and IDE/General Purpose CS statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
-        [0] = { /* IDE/general purpose space */
-                .virtual        = CMX270_IDE104_VIRT,
-                .pfn            = __phys_to_pfn(CMX270_IDE104_PHYS),
-                .length         = SZ_64M - SZ_8M,
-                .type           = MT_DEVICE
-        },
-        [1] = { /* PCI bridge */
-                .virtual        = CMX270_IT8152_VIRT,
-                .pfn            = __phys_to_pfn(CMX270_IT8152_PHYS),
-                .length         = SZ_64M,
-                .type           = MT_DEVICE
-        },
-};
+static void __init cmx270_init_2700G(void)
+{
+        platform_device_register(&cmx270_2700G);
+}
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
 
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /*
   Display definitions
   keep these for backwards compatibility, although symbolic names (as
@@ -452,7 +583,16 @@ static int __init cmx270_set_display(char *str)
 */
 __setup("monitor=", cmx270_set_display);
 
+static void __init cmx270_init_display(void)
+{
+        set_pxa_fb_info(cmx270_display);
+}
+#else
+static inline void cmx270_init_display(void) {}
+#endif
+
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int cmx270_ohci_init(struct device *dev)
 {
         /* Set the Power Control Polarity Low */
@@ -467,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
         .init           = cmx270_ohci_init,
 };
 
+static void __init cmx270_init_ohci(void)
+{
+        pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
 
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int cmx270_mci_init(struct device *dev,
                            irq_handler_t cmx270_detect_int,
                            void *data)
 {
         int err;
 
-        /*
-         * setup GPIO for PXA27x MMC controller
-         */
-        pxa_gpio_mode(GPIO32_MMCCLK_MD);
-        pxa_gpio_mode(GPIO112_MMCCMD_MD);
-        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-        /* SB-X270 uses GPIO105 as SD power enable */
-        pxa_gpio_mode(105 | GPIO_OUT);
+        err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
+        if (err) {
+                dev_warn(dev, "power gpio unavailable\n");
+                return err;
+        }
 
-        /* card detect IRQ on GPIO 83 */
-        pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
+        gpio_direction_output(GPIO105_MMC_POWER, 0);
 
         err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
                           IRQF_DISABLED | IRQF_TRIGGER_FALLING,
                           "MMC card detect", data);
-        if (err)
-                printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
-                       " request MMC card detect IRQ\n");
+        if (err) {
+                gpio_free(GPIO105_MMC_POWER);
+                dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
+                        " request MMC card detect IRQ\n");
+        }
 
         return err;
 }
@@ -505,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
         struct pxamci_platform_data *p_d = dev->platform_data;
 
         if ((1 << vdd) & p_d->ocr_mask) {
-                printk(KERN_DEBUG "%s: on\n", __func__);
-                GPCR(105) = GPIO_bit(105);
+                dev_dbg(dev, "power on\n");
+                gpio_set_value(GPIO105_MMC_POWER, 0);
         } else {
-                GPSR(105) = GPIO_bit(105);
-                printk(KERN_DEBUG "%s: off\n", __func__);
+                gpio_set_value(GPIO105_MMC_POWER, 1);
+                dev_dbg(dev, "power off\n");
         }
 }
 
 static void cmx270_mci_exit(struct device *dev, void *data)
 {
         free_irq(CMX270_MMC_IRQ, data);
+        gpio_free(GPIO105_MMC_POWER);
 }
 
 static struct pxamci_platform_data cmx270_mci_platform_data = {
@@ -525,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
         .exit           = cmx270_mci_exit,
 };
 
+static void __init cmx270_init_mmc(void)
+{
+        pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
 #ifdef CONFIG_PM
 static unsigned long sleep_save_msc[10];
 
@@ -586,52 +737,63 @@ static int __init cmx270_pm_init(void)
 static int __init cmx270_pm_init(void) { return 0; }
 #endif
 
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx270_init_ac97(void)
+{
+        pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx270_init_ac97(void) {}
+#endif
+
 static void __init cmx270_init(void)
 {
         cmx270_pm_init();
 
-        set_pxa_fb_info(cmx270_display);
-
-        /* register CM-X270 platform devices */
-        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-        /* set MCI and OHCI platform parameters */
-        pxa_set_mci_info(&cmx270_mci_platform_data);
-        pxa_set_ohci_info(&cmx270_ohci_platform_data);
-
-        /* This enables the STUART */
-        pxa_gpio_mode(GPIO46_STRXD_MD);
-        pxa_gpio_mode(GPIO47_STTXD_MD);
-
-        /* This enables the BTUART  */
-        pxa_gpio_mode(GPIO42_BTRXD_MD);
-        pxa_gpio_mode(GPIO43_BTTXD_MD);
-        pxa_gpio_mode(GPIO44_BTCTS_MD);
-        pxa_gpio_mode(GPIO45_BTRTS_MD);
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+
+        cmx270_init_dm9000();
+        cmx270_init_rtc();
+        cmx270_init_display();
+        cmx270_init_mmc();
+        cmx270_init_ohci();
+        cmx270_init_ac97();
+        cmx270_init_touchscreen();
+        cmx270_init_leds();
+        cmx270_init_2700G();
 }
 
 static void __init cmx270_init_irq(void)
 {
         pxa27x_init_irq();
 
+        cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
+}
 
-        cmx270_pci_init_irq();
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx270_io_desc[] __initdata = {
+        [0] = { /* PCI bridge */
+                .virtual        = CMX270_IT8152_VIRT,
+                .pfn            = __phys_to_pfn(PXA_CS4_PHYS),
+                .length         = SZ_64M,
+                .type           = MT_DEVICE
+        },
+};
 
-        /* Setup interrupt for dm9000 */
-        pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
-        set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
+static void __init cmx270_map_io(void)
+{
+        pxa_map_io();
+        iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 
-        /* Setup interrupt for 2700G */
-        pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
-        set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
+        it8152_base_address = CMX270_IT8152_VIRT;
 }
-
+#else
 static void __init cmx270_map_io(void)
 {
         pxa_map_io();
-        iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 }
-
+#endif
 
 MACHINE_START(ARMCORE, "Compulab CM-x270")
         .boot_params    = 0xa0000100,
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b757dd756655..e58504edb140 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -36,6 +36,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
@@ -464,6 +465,7 @@ static void corgi_irda_transceiver_mode(struct device *dev, int mode)
                 GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
         else
                 GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 0a85f706e887..e91c0f26c412 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -26,6 +26,7 @@
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/corgi.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
@@ -204,7 +205,9 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
         .read_devdata    = corgipm_read_devdata,
         .charger_wakeup  = corgi_charger_wakeup,
         .should_wakeup   = corgi_should_wakeup,
+#ifdef CONFIG_BACKLIGHT_CORGI
         .backlight_limit = corgibl_limit_intensity,
+#endif
         .charge_on_volt   = SHARPSL_CHARGE_ON_VOLT,
         .charge_on_temp   = SHARPSL_CHARGE_ON_TEMP,
         .charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
@@ -226,6 +229,10 @@ static int __devinit corgipm_init(void)
 {
         int ret;
 
+        if (!machine_is_corgi() && !machine_is_shepherd()
+                        && !machine_is_husky())
+                return -ENODEV;
+
         corgipm_device = platform_device_alloc("sharpsl-pm", -1);
         if (!corgipm_device)
                 return -ENOMEM;
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index d6c05b6eab35..84489dc51d81 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -10,11 +10,16 @@
 #include <asm/arch/mmc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/i2c.h>
+#include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa2xx_spi.h>
 #include <asm/arch/camera.h>
+#include <asm/arch/audio.h>
+#include <asm/arch/pxa3xx_nand.h>
 
 #include "devices.h"
+#include "generic.h"
 
 void __init pxa_register_device(struct platform_device *dev, void *data)
 {
@@ -91,8 +96,19 @@ static struct resource pxa2xx_udc_resources[] = {
 
 static u64 udc_dma_mask = ~(u32)0;
 
-struct platform_device pxa_device_udc = {
-        .name           = "pxa2xx-udc",
+struct platform_device pxa25x_device_udc = {
+        .name           = "pxa25x-udc",
+        .id             = -1,
+        .resource       = pxa2xx_udc_resources,
+        .num_resources  = ARRAY_SIZE(pxa2xx_udc_resources),
+        .dev            =  {
+                .platform_data  = &pxa_udc_info,
+                .dma_mask       = &udc_dma_mask,
+        }
+};
+
+struct platform_device pxa27x_device_udc = {
+        .name           = "pxa27x-udc",
         .id             = -1,
         .resource       = pxa2xx_udc_resources,
         .num_resources  = ARRAY_SIZE(pxa2xx_udc_resources),
@@ -233,8 +249,15 @@ struct platform_device pxa_device_i2c = {
         .num_resources  = ARRAY_SIZE(pxai2c_resources),
 };
 
+static unsigned long pxa27x_i2c_mfp_cfg[] = {
+        GPIO117_I2C_SCL,
+        GPIO118_I2C_SDA,
+};
+
 void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
 {
+        if (cpu_is_pxa27x())
+                pxa2xx_mfp_config(ARRAY_AND_SIZE(pxa27x_i2c_mfp_cfg));
         pxa_register_device(&pxa_device_i2c, info);
 }
 
@@ -278,8 +301,69 @@ struct platform_device pxa_device_rtc = {
         .id             = -1,
 };
 
+static struct resource pxa_ac97_resources[] = {
+        [0] = {
+                .start  = 0x40500000,
+                .end    = 0x40500000 + 0xfff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_AC97,
+                .end    = IRQ_AC97,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static u64 pxa_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device pxa_device_ac97 = {
+        .name           = "pxa2xx-ac97",
+        .id             = -1,
+        .dev            = {
+                .dma_mask = &pxa_ac97_dmamask,
+                .coherent_dma_mask = 0xffffffff,
+        },
+        .num_resources  = ARRAY_SIZE(pxa_ac97_resources),
+        .resource       = pxa_ac97_resources,
+};
+
+void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops)
+{
+        pxa_register_device(&pxa_device_ac97, ops);
+}
+
 #ifdef CONFIG_PXA25x
 
+static struct resource pxa25x_resource_pwm0[] = {
+        [0] = {
+                .start  = 0x40b00000,
+                .end    = 0x40b0000f,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device pxa25x_device_pwm0 = {
+        .name           = "pxa25x-pwm",
+        .id             = 0,
+        .resource       = pxa25x_resource_pwm0,
+        .num_resources  = ARRAY_SIZE(pxa25x_resource_pwm0),
+};
+
+static struct resource pxa25x_resource_pwm1[] = {
+        [0] = {
+                .start  = 0x40c00000,
+                .end    = 0x40c0000f,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device pxa25x_device_pwm1 = {
+        .name           = "pxa25x-pwm",
+        .id             = 1,
+        .resource       = pxa25x_resource_pwm1,
+        .num_resources  = ARRAY_SIZE(pxa25x_resource_pwm1),
+};
+
 static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource pxa25x_resource_ssp[] = {
@@ -568,6 +652,36 @@ struct platform_device pxa27x_device_ssp3 = {
         .num_resources  = ARRAY_SIZE(pxa27x_resource_ssp3),
 };
 
+static struct resource pxa27x_resource_pwm0[] = {
+        [0] = {
+                .start  = 0x40b00000,
+                .end    = 0x40b0001f,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device pxa27x_device_pwm0 = {
+        .name           = "pxa27x-pwm",
+        .id             = 0,
+        .resource       = pxa27x_resource_pwm0,
+        .num_resources  = ARRAY_SIZE(pxa27x_resource_pwm0),
+};
+
+static struct resource pxa27x_resource_pwm1[] = {
+        [0] = {
+                .start  = 0x40c00000,
+                .end    = 0x40c0001f,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device pxa27x_device_pwm1 = {
+        .name           = "pxa27x-pwm",
+        .id             = 1,
+        .resource       = pxa27x_resource_pwm1,
+        .num_resources  = ARRAY_SIZE(pxa27x_resource_pwm1),
+};
+
 static struct resource pxa27x_resource_camera[] = {
         [0] = {
                 .start  = 0x50000000,
@@ -718,4 +832,63 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
         pxa_register_device(&pxa3xx_device_mci3, info);
 }
 
+static struct resource pxa3xx_resources_nand[] = {
+        [0] = {
+                .start  = 0x43100000,
+                .end    = 0x43100053,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_NAND,
+                .end    = IRQ_NAND,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                /* DRCMR for Data DMA */
+                .start  = 97,
+                .end    = 97,
+                .flags  = IORESOURCE_DMA,
+        },
+        [3] = {
+                /* DRCMR for Command DMA */
+                .start  = 99,
+                .end    = 99,
+                .flags  = IORESOURCE_DMA,
+        },
+};
+
+static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_nand = {
+        .name           = "pxa3xx-nand",
+        .id             = -1,
+        .dev            = {
+                .dma_mask = &pxa3xx_nand_dma_mask,
+                .coherent_dma_mask = DMA_BIT_MASK(32),
+        },
+        .num_resources  = ARRAY_SIZE(pxa3xx_resources_nand),
+        .resource       = pxa3xx_resources_nand,
+};
+
+void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
+{
+        pxa_register_device(&pxa3xx_device_nand, info);
+}
 #endif /* CONFIG_PXA3xx */
+
+/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
+ * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+{
+        struct platform_device *pd;
+
+        pd = platform_device_alloc("pxa2xx-spi", id);
+        if (pd == NULL) {
+                printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+                       id);
+                return;
+        }
+
+        pd->dev.platform_data = info;
+        platform_device_add(pd);
+}
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index fcab017f27ee..887c738f5911 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,7 +1,8 @@
 extern struct platform_device pxa_device_mci;
 extern struct platform_device pxa3xx_device_mci2;
 extern struct platform_device pxa3xx_device_mci3;
-extern struct platform_device pxa_device_udc;
+extern struct platform_device pxa25x_device_udc;
+extern struct platform_device pxa27x_device_udc;
 extern struct platform_device pxa_device_fb;
 extern struct platform_device pxa_device_ffuart;
 extern struct platform_device pxa_device_btuart;
@@ -11,6 +12,7 @@ extern struct platform_device pxa_device_i2c;
 extern struct platform_device pxa_device_i2s;
 extern struct platform_device pxa_device_ficp;
 extern struct platform_device pxa_device_rtc;
+extern struct platform_device pxa_device_ac97;
 
 extern struct platform_device pxa27x_device_i2c_power;
 extern struct platform_device pxa27x_device_ohci;
@@ -24,4 +26,11 @@ extern struct platform_device pxa27x_device_ssp2;
 extern struct platform_device pxa27x_device_ssp3;
 extern struct platform_device pxa3xx_device_ssp4;
 
+extern struct platform_device pxa25x_device_pwm0;
+extern struct platform_device pxa25x_device_pwm1;
+extern struct platform_device pxa27x_device_pwm0;
+extern struct platform_device pxa27x_device_pwm1;
+
+extern struct platform_device pxa3xx_device_nand;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
new file mode 100644
index 000000000000..16c023630626
--- /dev/null
+++ b/arch/arm/mach-pxa/e400_lcd.c
@@ -0,0 +1,56 @@
+/*
+ * e400_lcd.c
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+        .pixclock       = 140703,
+        .xres           = 240,
+        .yres           = 320,
+        .bpp            = 16,
+        .hsync_len      = 4,
+        .left_margin    = 28,
+        .right_margin   = 8,
+        .vsync_len      = 3,
+        .upper_margin   = 5,
+        .lower_margin   = 6,
+        .sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+        .modes          = &e400_pxafb_mode_info,
+        .num_modes      = 1,
+        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+        .lccr3          = 0,
+        .pxafb_backlight_power  = NULL,
+};
+
+static int __init e400_lcd_init(void)
+{
+        if (!machine_is_e400())
+                return -ENODEV;
+
+        set_pxa_fb_info(&e400_pxafb_mach_info);
+        return 0;
+}
+
+module_init(e400_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e400 lcd driver");
+MODULE_LICENSE("GPLv2");
+
diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c
new file mode 100644
index 000000000000..26bd599af178
--- /dev/null
+++ b/arch/arm/mach-pxa/e740_lcd.c
@@ -0,0 +1,123 @@
+/* e740_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+/*
+**potential** shutdown routine - to be investigated
+devmem2 0x0c010528 w 0xff3fff00
+devmem2 0x0c010190 w 0x7FFF8000
+devmem2 0x0c0101b0 w 0x00FF0000
+devmem2 0x0c01008c w 0x00000000
+devmem2 0x0c010080 w 0x000000bf
+devmem2 0x0c010098 w 0x00000015
+devmem2 0x0c010088 w 0x4b000204
+devmem2 0x0c010098 w 0x0000001d
+*/
+
+static struct w100_gen_regs e740_lcd_regs = {
+        .lcd_format =            0x00008023,
+        .lcdd_cntl1 =            0x0f000000,
+        .lcdd_cntl2 =            0x0003ffff,
+        .genlcd_cntl1 =          0x00ffff03,
+        .genlcd_cntl2 =          0x003c0f03,
+        .genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+        .xres            = 240,
+        .yres            = 320,
+        .left_margin     = 20,
+        .right_margin    = 28,
+        .upper_margin    = 9,
+        .lower_margin    = 8,
+        .crtc_ss         = 0x80140013,
+        .crtc_ls         = 0x81150110,
+        .crtc_gs         = 0x80050005,
+        .crtc_vpos_gs    = 0x000a0009,
+        .crtc_rev        = 0x0040010a,
+        .crtc_dclk       = 0xa906000a,
+        .crtc_gclk       = 0x80050108,
+        .crtc_goe        = 0x80050108,
+        .pll_freq        = 57,
+        .pixclk_divider         = 4,
+        .pixclk_divider_rotated = 4,
+        .pixclk_src     = CLK_SRC_XTAL,
+        .sysclk_divider  = 1,
+        .sysclk_src     = CLK_SRC_PLL,
+        .crtc_ps1_active =       0x41060010,
+};
+
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+        .init_data1 = 0x21002103,
+        .gpio_dir1  = 0xffffdeff,
+        .gpio_oe1   = 0x03c00643,
+        .init_data2 = 0x003f003f,
+        .gpio_dir2  = 0xffffffff,
+        .gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+        .modelist   = &e740_lcd_mode,
+        .num_modes  = 1,
+        .regs       = &e740_lcd_regs,
+        .gpio       = &e740_w100_gpio_info,
+        .xtal_freq = 14318000,
+        .xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+        [0] = {
+                .start          = 0x0c000000,
+                .end            = 0x0cffffff,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e740_fb_device = {
+        .name           = "w100fb",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &e740_fb_info,
+        },
+        .num_resources  = ARRAY_SIZE(e740_fb_resources),
+        .resource       = e740_fb_resources,
+};
+
+static int e740_lcd_init(void)
+{
+        int ret;
+
+        if (!machine_is_e740())
+                return -ENODEV;
+
+        return platform_device_register(&e740_fb_device);
+}
+
+module_init(e740_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e740 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750_lcd.c
new file mode 100644
index 000000000000..75edc3b5390f
--- /dev/null
+++ b/arch/arm/mach-pxa/e750_lcd.c
@@ -0,0 +1,109 @@
+/* e750_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e750_lcd_regs = {
+        .lcd_format =            0x00008003,
+        .lcdd_cntl1 =            0x00000000,
+        .lcdd_cntl2 =            0x0003ffff,
+        .genlcd_cntl1 =          0x00fff003,
+        .genlcd_cntl2 =          0x003c0f03,
+        .genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+        .xres            = 240,
+        .yres            = 320,
+        .left_margin     = 21,
+        .right_margin    = 22,
+        .upper_margin    = 5,
+        .lower_margin    = 4,
+        .crtc_ss         = 0x80150014,
+        .crtc_ls         = 0x8014000d,
+        .crtc_gs         = 0xc1000005,
+        .crtc_vpos_gs    = 0x00020147,
+        .crtc_rev        = 0x0040010a,
+        .crtc_dclk       = 0xa1700030,
+        .crtc_gclk       = 0x80cc0015,
+        .crtc_goe        = 0x80cc0015,
+        .crtc_ps1_active = 0x61060017,
+        .pll_freq        = 57,
+        .pixclk_divider         = 4,
+        .pixclk_divider_rotated = 4,
+        .pixclk_src     = CLK_SRC_XTAL,
+        .sysclk_divider  = 1,
+        .sysclk_src     = CLK_SRC_PLL,
+};
+
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+        .init_data1 = 0x01192f1b,
+        .gpio_dir1  = 0xd5ffdeff,
+        .gpio_oe1   = 0x000020bf,
+        .init_data2 = 0x010f010f,
+        .gpio_dir2  = 0xffffffff,
+        .gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+        .modelist   = &e750_lcd_mode,
+        .num_modes  = 1,
+        .regs       = &e750_lcd_regs,
+        .gpio       = &e750_w100_gpio_info,
+        .xtal_freq  = 14318000,
+        .xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+        [0] = {
+                .start          = 0x0c000000,
+                .end            = 0x0cffffff,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e750_fb_device = {
+        .name           = "w100fb",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &e750_fb_info,
+        },
+        .num_resources  = ARRAY_SIZE(e750_fb_resources),
+        .resource       = e750_fb_resources,
+};
+
+static int e750_lcd_init(void)
+{
+        if (!machine_is_e750())
+                return -ENODEV;
+
+        return platform_device_register(&e750_fb_device);
+}
+
+module_init(e750_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e750 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800_lcd.c
new file mode 100644
index 000000000000..e6aeab0ebc22
--- /dev/null
+++ b/arch/arm/mach-pxa/e800_lcd.c
@@ -0,0 +1,159 @@
+/* e800_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e800_lcd_regs = {
+        .lcd_format =            0x00008003,
+        .lcdd_cntl1 =            0x02a00000,
+        .lcdd_cntl2 =            0x0003ffff,
+        .genlcd_cntl1 =          0x000ff2a3,
+        .genlcd_cntl2 =          0x000002a3,
+        .genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+        [0] = {
+                .xres            = 480,
+                .yres            = 640,
+                .left_margin     = 52,
+                .right_margin    = 148,
+                .upper_margin    = 2,
+                .lower_margin    = 6,
+                .crtc_ss         = 0x80350034,
+                .crtc_ls         = 0x802b0026,
+                .crtc_gs         = 0x80160016,
+                .crtc_vpos_gs    = 0x00020003,
+                .crtc_rev        = 0x0040001d,
+                .crtc_dclk       = 0xe0000000,
+                .crtc_gclk       = 0x82a50049,
+                .crtc_goe        = 0x80ee001c,
+                .crtc_ps1_active = 0x00000000,
+                .pll_freq        = 128,
+                .pixclk_divider         = 4,
+                .pixclk_divider_rotated = 6,
+                .pixclk_src     = CLK_SRC_PLL,
+                .sysclk_divider  = 0,
+                .sysclk_src     = CLK_SRC_PLL,
+        },
+        [1] = {
+                .xres            = 240,
+                .yres            = 320,
+                .left_margin     = 15,
+                .right_margin    = 88,
+                .upper_margin    = 0,
+                .lower_margin    = 7,
+                .crtc_ss         = 0xd010000f,
+                .crtc_ls         = 0x80070003,
+                .crtc_gs         = 0x80000000,
+                .crtc_vpos_gs    = 0x01460147,
+                .crtc_rev        = 0x00400003,
+                .crtc_dclk       = 0xa1700030,
+                .crtc_gclk       = 0x814b0008,
+                .crtc_goe        = 0x80cc0015,
+                .crtc_ps1_active = 0x00000000,
+                .pll_freq        = 100,
+                .pixclk_divider         = 6, /* Wince uses 14 which gives a 7MHz pclk. */
+                .pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+                .pixclk_src     = CLK_SRC_PLL,
+                .sysclk_divider  = 0,
+                .sysclk_src     = CLK_SRC_PLL,
+        }
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+        .init_data1 = 0xc13fc019,
+        .gpio_dir1  = 0x3e40df7f,
+        .gpio_oe1   = 0x003c3000,
+        .init_data2 = 0x00000000,
+        .gpio_dir2  = 0x00000000,
+        .gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+        .ext_cntl        = 0x09640011,
+        .sdram_mode_reg  = 0x00600021,
+        .ext_timing_cntl = 0x10001545,
+        .io_cntl         = 0x7ddd7333,
+        .size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+        unsigned long tmp;
+
+        tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+        if (par->mode->xres == 480)
+                tmp |= 0x100;
+        else
+                tmp &= ~0x100;
+        w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+        .change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+        .modelist   = e800_lcd_mode,
+        .num_modes  = 2,
+        .regs       = &e800_lcd_regs,
+        .gpio       = &e800_w100_gpio_info,
+        .mem        = &e800_w100_mem_info,
+        .tg         = &e800_tg_info,
+        .xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+        [0] = {
+                .start          = 0x0c000000,
+                .end            = 0x0cffffff,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e800_fb_device = {
+        .name           = "w100fb",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &e800_fb_info,
+        },
+        .num_resources  = ARRAY_SIZE(e800_fb_resources),
+        .resource       = e800_fb_resources,
+};
+
+static int e800_lcd_init(void)
+{
+        if (!machine_is_e800())
+                return -ENODEV;
+
+        return platform_device_register(&e800_fb_device);
+}
+
+module_init(e800_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e800 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 9c57700ee5c2..e5cc6ca63c75 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1,7 +1,7 @@
 /*
- * Support for CompuLab EM-x270 platform
+ * Support for CompuLab EM-X270 platform
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,29 +14,159 @@
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
 
+#include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/pxa27x-udc.h>
+#include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <asm/arch/pxa27x_keypad.h>
 
 #include "generic.h"
 
 /* GPIO IRQ usage */
-#define EM_X270_MMC_PD          (105)
-#define EM_X270_ETHIRQ          IRQ_GPIO(41)
-#define EM_X270_MMC_IRQ         IRQ_GPIO(13)
+#define GPIO41_ETHIRQ           (41)
+#define GPIO13_MMC_CD           (13)
+#define EM_X270_ETHIRQ          IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_MMC_CD          IRQ_GPIO(GPIO13_MMC_CD)
+
+/* NAND control GPIOs */
+#define GPIO11_NAND_CS  (11)
+#define GPIO56_NAND_RB  (56)
+
+static unsigned long em_x270_pin_config[] = {
+        /* AC'97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+        GPIO98_AC97_SYSCLK,
+        GPIO113_AC97_nRESET,
+
+        /* BTUART */
+        GPIO42_BTUART_RXD,
+        GPIO43_BTUART_TXD,
+        GPIO44_BTUART_CTS,
+        GPIO45_BTUART_RTS,
+
+        /* STUART */
+        GPIO46_STUART_RXD,
+        GPIO47_STUART_TXD,
+
+        /* MCI controller */
+        GPIO32_MMC_CLK,
+        GPIO112_MMC_CMD,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+
+        /* LCD */
+        GPIO58_LCD_LDD_0,
+        GPIO59_LCD_LDD_1,
+        GPIO60_LCD_LDD_2,
+        GPIO61_LCD_LDD_3,
+        GPIO62_LCD_LDD_4,
+        GPIO63_LCD_LDD_5,
+        GPIO64_LCD_LDD_6,
+        GPIO65_LCD_LDD_7,
+        GPIO66_LCD_LDD_8,
+        GPIO67_LCD_LDD_9,
+        GPIO68_LCD_LDD_10,
+        GPIO69_LCD_LDD_11,
+        GPIO70_LCD_LDD_12,
+        GPIO71_LCD_LDD_13,
+        GPIO72_LCD_LDD_14,
+        GPIO73_LCD_LDD_15,
+        GPIO74_LCD_FCLK,
+        GPIO75_LCD_LCLK,
+        GPIO76_LCD_PCLK,
+        GPIO77_LCD_BIAS,
+
+        /* QCI */
+        GPIO84_CIF_FV,
+        GPIO25_CIF_LV,
+        GPIO53_CIF_MCLK,
+        GPIO54_CIF_PCLK,
+        GPIO81_CIF_DD_0,
+        GPIO55_CIF_DD_1,
+        GPIO51_CIF_DD_2,
+        GPIO50_CIF_DD_3,
+        GPIO52_CIF_DD_4,
+        GPIO48_CIF_DD_5,
+        GPIO17_CIF_DD_6,
+        GPIO12_CIF_DD_7,
+
+        /* I2C */
+        GPIO117_I2C_SCL,
+        GPIO118_I2C_SDA,
+
+        /* Keypad */
+        GPIO100_KP_MKIN_0       | WAKEUP_ON_LEVEL_HIGH,
+        GPIO101_KP_MKIN_1       | WAKEUP_ON_LEVEL_HIGH,
+        GPIO102_KP_MKIN_2       | WAKEUP_ON_LEVEL_HIGH,
+        GPIO34_KP_MKIN_3        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO39_KP_MKIN_4        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO99_KP_MKIN_5        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO91_KP_MKIN_6        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO36_KP_MKIN_7        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO103_KP_MKOUT_0,
+        GPIO104_KP_MKOUT_1,
+        GPIO105_KP_MKOUT_2,
+        GPIO106_KP_MKOUT_3,
+        GPIO107_KP_MKOUT_4,
+        GPIO108_KP_MKOUT_5,
+        GPIO96_KP_MKOUT_6,
+        GPIO22_KP_MKOUT_7,
+
+        /* SSP1 */
+        GPIO26_SSP1_RXD,
+        GPIO23_SSP1_SCLK,
+        GPIO24_SSP1_SFRM,
+        GPIO57_SSP1_TXD,
+
+        /* SSP2 */
+        GPIO19_SSP2_SCLK,
+        GPIO14_SSP2_SFRM,
+        GPIO89_SSP2_TXD,
+        GPIO88_SSP2_RXD,
+
+        /* SDRAM and local bus */
+        GPIO15_nCS_1,
+        GPIO78_nCS_2,
+        GPIO79_nCS_3,
+        GPIO80_nCS_4,
+        GPIO49_nPWE,
+        GPIO18_RDY,
+
+        /* GPIO */
+        GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+        /* power controls */
+        GPIO20_GPIO     | MFP_LPM_DRIVE_LOW,    /* GPRS_PWEN */
+        GPIO115_GPIO    | MFP_LPM_DRIVE_LOW,    /* WLAN_PWEN */
+
+        /* NAND controls */
+        GPIO11_GPIO     | MFP_LPM_DRIVE_HIGH,   /* NAND CE# */
+        GPIO56_GPIO,                            /* NAND Ready/Busy */
+
+        /* interrupts */
+        GPIO13_GPIO,    /* MMC card detect */
+        GPIO41_GPIO,    /* DM9000 interrupt */
+};
 
-static struct resource em_x270_dm9k_resource[] = {
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
         [0] = {
                 .start = PXA_CS2_PHYS,
                 .end   = PXA_CS2_PHYS + 3,
@@ -54,38 +184,30 @@ static struct resource em_x270_dm9k_resource[] = {
         }
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data em_x270_dm9k_platdata = {
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
         .flags          = DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device em_x270_dm9k = {
+static struct platform_device em_x270_dm9000 = {
         .name           = "dm9000",
         .id             = 0,
-        .num_resources  = ARRAY_SIZE(em_x270_dm9k_resource),
-        .resource       = em_x270_dm9k_resource,
+        .num_resources  = ARRAY_SIZE(em_x270_dm9000_resource),
+        .resource       = em_x270_dm9000_resource,
         .dev            = {
-                .platform_data = &em_x270_dm9k_platdata,
+                .platform_data = &em_x270_dm9000_platdata,
         }
 };
 
-/* audio device */
-static struct platform_device em_x270_audio = {
-        .name           = "pxa2xx-ac97",
-        .id             = -1,
-};
-
-/* WM9712 touchscreen controller. Hopefully the driver will make it to
- * the mainstream sometime */
-static struct platform_device em_x270_ts = {
-        .name           = "wm97xx-ts",
-        .id             = -1,
-};
+static void __init em_x270_init_dm9000(void)
+{
+        platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
 
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource em_x270_v3020_resource[] = {
         [0] = {
                 .start = PXA_CS4_PHYS,
@@ -108,20 +230,26 @@ static struct platform_device em_x270_rtc = {
         }
 };
 
-/* NAND flash */
-#define GPIO_NAND_CS    (11)
-#define GPIO_NAND_RB    (56)
+static void __init em_x270_init_rtc(void)
+{
+        platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
 
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static inline void nand_cs_on(void)
 {
-        GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+        gpio_set_value(GPIO11_NAND_CS, 0);
 }
 
 static void nand_cs_off(void)
 {
         dsb();
 
-        GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+        gpio_set_value(GPIO11_NAND_CS, 1);
 }
 
 /* hardware specific access to control-lines */
@@ -161,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
         dsb();
 
-        return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+        return gpio_get_value(GPIO56_NAND_RB);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -214,17 +342,35 @@ static struct platform_device em_x270_nand = {
         }
 };
 
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-        &em_x270_dm9k,
-        &em_x270_audio,
-        &em_x270_ts,
-        &em_x270_rtc,
-        &em_x270_nand,
-};
+static void __init em_x270_init_nand(void)
+{
+        int err;
+
+        err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+        if (err) {
+                pr_warning("EM-X270: failed to request NAND CS gpio\n");
+                return;
+        }
+
+        gpio_direction_output(GPIO11_NAND_CS, 1);
+
+        err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+        if (err) {
+                pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+                gpio_free(GPIO11_NAND_CS);
+                return;
+        }
+
+        gpio_direction_input(GPIO56_NAND_RB);
 
+        platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
 
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
 {
         /* Set the Power Control Polarity Low */
@@ -242,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
         .init           = em_x270_ohci_init,
 };
 
+static void __init em_x270_init_ohci(void)
+{
+        pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
 
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int em_x270_mci_init(struct device *dev,
                             irq_handler_t em_x270_detect_int,
                             void *data)
 {
-        int err;
-
-        /* setup GPIO for PXA27x MMC controller */
-        pxa_gpio_mode(GPIO32_MMCCLK_MD);
-        pxa_gpio_mode(GPIO112_MMCCMD_MD);
-        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-        /* EM-X270 uses GPIO13 as SD power enable */
-        pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
-
-        err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
-                          IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-                          "MMC card detect", data);
+        int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
+                              IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+                              "MMC card detect", data);
         if (err) {
                 printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
                        __func__, err);
@@ -284,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-        free_irq(EM_X270_MMC_IRQ, data);
+        int irq = gpio_to_irq(GPIO13_MMC_CD);
+        free_irq(irq, data);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
@@ -294,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
         .exit           = em_x270_mci_exit,
 };
 
+static void __init em_x270_init_mmc(void)
+{
+        pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
 /* LCD 480x640 */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info em_x270_lcd_mode = {
         .pixclock       = 50000,
         .bpp            = 16,
@@ -312,39 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
 static struct pxafb_mach_info em_x270_lcd = {
         .modes          = &em_x270_lcd_mode,
         .num_modes      = 1,
-        .cmap_inverse   = 0,
-        .cmap_static    = 0,
-        .lccr0          = LCCR0_PAS,
-        .lccr3          = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+        .lcd_conn       = LCD_COLOR_TFT_16BPP,
 };
-
-static void __init em_x270_init(void)
+static void __init em_x270_init_lcd(void)
 {
-        /* setup LCD */
         set_pxa_fb_info(&em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init em_x270_init_ac97(void)
+{
+        pxa_set_ac97_info(NULL);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int em_x270_matrix_keys[] = {
+        KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+        KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+        KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
 
-        /* register EM-X270 platform devices */
-        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+        /* code map for the matrix keys */
+        .matrix_key_rows        = 3,
+        .matrix_key_cols        = 3,
+        .matrix_key_map         = em_x270_matrix_keys,
+        .matrix_key_map_size    = ARRAY_SIZE(em_x270_matrix_keys),
+};
 
-        /* set MCI and OHCI platform parameters */
-        pxa_set_mci_info(&em_x270_mci_platform_data);
-        pxa_set_ohci_info(&em_x270_ohci_platform_data);
+static void __init em_x270_init_keypad(void)
+{
+        pxa_set_keypad_info(&em_x270_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+        [0] = {
+                .desc   = "sleep/wakeup",
+                .code   = KEY_SUSPEND,
+                .type   = EV_PWR,
+                .gpio   = 1,
+                .wakeup = 1,
+        },
+};
+
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+        .buttons        = gpio_keys_button,
+        .nbuttons       = 1,
+};
 
-        /* setup STUART GPIOs */
-        pxa_gpio_mode(GPIO46_STRXD_MD);
-        pxa_gpio_mode(GPIO47_STTXD_MD);
+static struct platform_device em_x270_gpio_keys = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &em_x270_gpio_keys_data,
+        },
+};
 
-        /* setup BTUART GPIOs */
-        pxa_gpio_mode(GPIO42_BTRXD_MD);
-        pxa_gpio_mode(GPIO43_BTTXD_MD);
-        pxa_gpio_mode(GPIO44_BTCTS_MD);
-        pxa_gpio_mode(GPIO45_BTRTS_MD);
+static void __init em_x270_init_gpio_keys(void)
+{
+        platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
 
-        /* Setup interrupt for dm9000 */
-        set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+static void __init em_x270_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+        em_x270_init_dm9000();
+        em_x270_init_rtc();
+        em_x270_init_nand();
+        em_x270_init_lcd();
+        em_x270_init_mmc();
+        em_x270_init_ohci();
+        em_x270_init_keypad();
+        em_x270_init_gpio_keys();
+        em_x270_init_ac97();
 }
 
-MACHINE_START(EM_X270, "Compulab EM-x270")
+MACHINE_START(EM_X270, "Compulab EM-X270")
         .boot_params    = 0xa0000100,
         .phys_io        = 0x40000000,
         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index ee0ae93c876a..c29b7b21c11b 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -17,7 +17,7 @@
 #include <asm/arch/hardware.h>
 #include <asm/mach-types.h>
 
-#include <generic.h>
+#include "generic.h"
 
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
@@ -47,6 +47,19 @@ MACHINE_START(E330, "Toshiba e330")
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_E350
+MACHINE_START(E350, "Toshiba e350")
+        /* Maintainer: Ian Molton (spyro@f2s.com) */
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa25x_init_irq,
+        .fixup          = eseries_fixup,
+        .timer = &pxa_timer,
+MACHINE_END
+#endif
+
 #ifdef CONFIG_MACH_E740
 MACHINE_START(E740, "Toshiba e740")
         /* Maintainer: Ian Molton (spyro@f2s.com) */
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
new file mode 100644
index 000000000000..362847a10998
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries_udc.c
@@ -0,0 +1,57 @@
+/*
+ * UDC functions for the Toshiba e-series PDAs
+ *
+ * Copyright (c) Ian Molton 2003
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/arch/udc.h>
+#include <asm/arch/eseries-gpio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/domain.h>
+
+/* local PXA generic code */
+#include "generic.h"
+
+static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+        .gpio_vbus   = GPIO_E7XX_USB_DISC,
+        .gpio_pullup = GPIO_E7XX_USB_PULLUP,
+        .gpio_pullup_inverted = 1
+};
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+        .gpio_vbus   = GPIO_E800_USB_DISC,
+        .gpio_pullup = GPIO_E800_USB_PULLUP,
+        .gpio_pullup_inverted = 1
+};
+
+static int __init eseries_udc_init(void)
+{
+        if (machine_is_e330() || machine_is_e350() ||
+            machine_is_e740() || machine_is_e750() ||
+            machine_is_e400())
+                pxa_set_udc_info(&e7xx_udc_mach_info);
+        else if (machine_is_e800())
+                pxa_set_udc_info(&e800_udc_mach_info);
+
+        return 0;
+}
+
+module_init(eseries_udc_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("eseries UDC support");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
new file mode 100644
index 000000000000..0143eed65398
--- /dev/null
+++ b/arch/arm/mach-pxa/ezx.c
@@ -0,0 +1,220 @@
+/*
+ *  ezx.c - Common code for the EZX platform.
+ *
+ *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ *                2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ *                2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/setup.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/i2c.h>
+
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = 1023,
+        .dft_brightness = 1023,
+        .pwm_period_ns  = 78770,
+};
+
+static struct platform_device ezx_backlight_device = {
+        .name           = "pwm-backlight",
+        .dev            = {
+                .parent = &pxa27x_device_pwm0.dev,
+                .platform_data = &ezx_backlight_data,
+        },
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+        .pixclock               = 150000,
+        .xres                   = 240,
+        .yres                   = 320,
+        .bpp                    = 16,
+        .hsync_len              = 10,
+        .left_margin            = 20,
+        .right_margin           = 10,
+        .vsync_len              = 2,
+        .upper_margin           = 3,
+        .lower_margin           = 2,
+        .sync                   = 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 = {
+        .modes          = &mode_ezx_old,
+        .num_modes      = 1,
+        .lcd_conn       = LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+        .pixclock               = 192308,
+        .xres                   = 240,
+        .yres                   = 320,
+        .bpp                    = 32,
+        .depth                  = 18,
+        .hsync_len              = 10,
+        .left_margin            = 20,
+        .right_margin           = 10,
+        .vsync_len              = 2,
+        .upper_margin           = 3,
+        .lower_margin           = 2,
+        .sync                   = 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 = {
+        .modes          = &mode_72r89803y01,
+        .num_modes      = 1,
+        .lcd_conn       = LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *devices[] __initdata = {
+        &ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata = {
+        /* PWM backlight */
+        GPIO16_PWM0_OUT,
+
+        /* BTUART */
+        GPIO42_BTUART_RXD,
+        GPIO43_BTUART_TXD,
+        GPIO44_BTUART_CTS,
+        GPIO45_BTUART_RTS,
+
+        /* STUART */
+        GPIO46_STUART_RXD,
+        GPIO47_STUART_TXD,
+
+        /* For A780 support (connected with Neptune GSM chip) */
+        GPIO30_USB_P3_2,        /* ICL_TXENB */
+        GPIO31_USB_P3_6,        /* ICL_VPOUT */
+        GPIO90_USB_P3_5,        /* ICL_VPIN */
+        GPIO91_USB_P3_1,        /* ICL_XRXD */
+        GPIO56_USB_P3_4,        /* ICL_VMOUT */
+        GPIO113_USB_P3_3,       /* /ICL_VMIN */
+};
+
+static void __init ezx_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+        pxa_set_i2c_info(NULL);
+        if (machine_is_ezx_a780() || machine_is_ezx_e680())
+                set_pxa_fb_info(&ezx_fb_info_1);
+        else
+                set_pxa_fb_info(&ezx_fb_info_2);
+
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
+                char **cmdline, struct meminfo *mi)
+{
+        /* We have two ram chips. First one with 32MB at 0xA0000000 and a second
+         * 16MB one at 0xAC000000
+         */
+        mi->nr_banks = 2;
+        mi->bank[0].start = 0xa0000000;
+        mi->bank[0].node = 0;
+        mi->bank[0].size = (32*1024*1024);
+        mi->bank[1].start = 0xac000000;
+        mi->bank[1].node = 1;
+        mi->bank[1].size = (16*1024*1024);
+}
+
+#ifdef CONFIG_MACH_EZX_A780
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 44617938f3f1..ca053226fba0 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -60,23 +60,6 @@ unsigned int get_memclk_frequency_10khz(void)
 EXPORT_SYMBOL(get_memclk_frequency_10khz);
 
 /*
- * Routine to safely enable or disable a clock in the CKEN
- */
-void __pxa_set_cken(int clock, int enable)
-{
-        unsigned long flags;
-        local_irq_save(flags);
-
-        if (enable)
-                CKEN |= (1 << clock);
-        else
-                CKEN &= ~(1 << clock);
-
-        local_irq_restore(flags);
-}
-EXPORT_SYMBOL(__pxa_set_cken);
-
-/*
  * Intel PXA2xx internal register mapping.
  *
  * Note 1: not all PXA2xx variants implement all those addresses.
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index a9a0c3fab159..fbff557bb225 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -21,7 +21,6 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 530654474bb2..dd759d03a9fd 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -38,6 +39,7 @@
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ssp.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
 #include <asm/arch/littleton.h>
 
 #include "generic.h"
@@ -101,18 +103,26 @@ static struct resource smc91x_resources[] = {
         [1] = {
                 .start  = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
                 .end    = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
-                .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
         }
 };
 
+static struct smc91x_platdata littleton_smc91x_info = {
+        .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+                  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = 0,
         .num_resources  = ARRAY_SIZE(smc91x_resources),
         .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &littleton_smc91x_info,
+        },
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /* use bit 30, 31 as the indicator of command parameter number */
 #define CMD0(x)         ((0x00000000) | ((x) << 9))
 #define CMD1(x, x1)     ((0x40000000) | ((x) << 9) | 0x100 | (x1))
@@ -311,9 +321,9 @@ static void littleton_init_lcd(void)
 }
 #else
 static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
         /* KEY(row, col, key_code) */
         KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
@@ -361,6 +371,57 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+        [0] = {
+                .name        = "Bootloader",
+                .offset      = 0,
+                .size        = 0x060000,
+                .mask_flags  = MTD_WRITEABLE, /* force read-only */
+        },
+        [1] = {
+                .name        = "Kernel",
+                .offset      = 0x060000,
+                .size        = 0x200000,
+                .mask_flags  = MTD_WRITEABLE, /* force read-only */
+        },
+        [2] = {
+                .name        = "Filesystem",
+                .offset      = 0x0260000,
+                .size        = 0x3000000,     /* 48M - rootfs */
+        },
+        [3] = {
+                .name        = "MassStorage",
+                .offset      = 0x3260000,
+                .size        = 0x3d40000,
+        },
+        [4] = {
+                .name        = "BBT",
+                .offset      = 0x6FA0000,
+                .size        = 0x80000,
+                .mask_flags  = MTD_WRITEABLE,  /* force read-only */
+        },
+        /* NOTE: we reserve some blocks at the end of the NAND flash for
+         * bad block management, and the max number of relocation blocks
+         * differs on different platforms. Please take care with it when
+         * defining the partition table.
+         */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+        .enable_arbiter = 1,
+        .parts          = littleton_nand_partitions,
+        .nr_parts       = ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+        pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init littleton_init(void)
 {
         /* initialize MFP configurations */
@@ -374,6 +435,7 @@ static void __init littleton_init(void)
 
         littleton_init_lcd();
         littleton_init_keypad();
+        littleton_init_nand();
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index a20e4b1649d6..cc1c4fa06145 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -23,6 +23,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/pwm_backlight.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -134,9 +135,12 @@ static struct sys_device lpd270_irq_device = {
 
 static int __init lpd270_irq_device_init(void)
 {
-        int ret = sysdev_class_register(&lpd270_irq_sysclass);
-        if (ret == 0)
-                ret = sysdev_register(&lpd270_irq_device);
+        int ret = -ENODEV;
+        if (machine_is_logicpd_pxa270()) {
+                ret = sysdev_class_register(&lpd270_irq_sysclass);
+                if (ret == 0)
+                        ret = sysdev_register(&lpd270_irq_device);
+        }
         return ret;
 }
 
@@ -164,11 +168,6 @@ static struct platform_device smc91x_device = {
         .resource       = smc91x_resources,
 };
 
-static struct platform_device lpd270_audio_device = {
-        .name           = "pxa2xx-ac97",
-        .id             = -1,
-};
-
 static struct resource lpd270_flash_resources[] = {
         [0] = {
                 .start  = PXA_CS0_PHYS,
@@ -233,21 +232,20 @@ static struct platform_device lpd270_flash_device[2] = {
         },
 };
 
-static void lpd270_backlight_power(int on)
-{
-        if (on) {
-                pxa_gpio_mode(GPIO16_PWM0_MD);
-                pxa_set_cken(CKEN_PWM0, 1);
-                PWM_CTRL0 = 0;
-                PWM_PWDUTY0 = 0x3ff;
-                PWM_PERVAL0 = 0x3ff;
-        } else {
-                PWM_CTRL0 = 0;
-                PWM_PWDUTY0 = 0x0;
-                PWM_PERVAL0 = 0x3FF;
-                pxa_set_cken(CKEN_PWM0, 0);
-        }
-}
+static struct platform_pwm_backlight_data lpd270_backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = 1,
+        .dft_brightness = 1,
+        .pwm_period_ns  = 78770,
+};
+
+static struct platform_device lpd270_backlight_device = {
+        .name           = "pwm-backlight",
+        .dev            = {
+                .parent = &pxa27x_device_pwm0.dev,
+                .platform_data = &lpd270_backlight_data,
+        },
+};
 
 /* 5.7" TFT QVGA (LoLo display number 1) */
 static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
@@ -269,7 +267,6 @@ static struct pxafb_mach_info sharp_lq057q3dc02 = {
         .num_modes              = 1,
         .lccr0                  = 0x07800080,
         .lccr3                  = 0x00400000,
-        .pxafb_backlight_power  = lpd270_backlight_power,
 };
 
 /* 12.1" TFT SVGA (LoLo display number 2) */
@@ -292,7 +289,6 @@ static struct pxafb_mach_info sharp_lq121s1dg31 = {
         .num_modes              = 1,
         .lccr0                  = 0x07800080,
         .lccr3                  = 0x00400000,
-        .pxafb_backlight_power  = lpd270_backlight_power,
 };
 
 /* 3.6" TFT QVGA (LoLo display number 3) */
@@ -315,7 +311,6 @@ static struct pxafb_mach_info sharp_lq036q1da01 = {
         .num_modes              = 1,
         .lccr0                  = 0x07800080,
         .lccr3                  = 0x00400000,
-        .pxafb_backlight_power  = lpd270_backlight_power,
 };
 
 /* 6.4" TFT VGA (LoLo display number 5) */
@@ -338,7 +333,6 @@ static struct pxafb_mach_info sharp_lq64d343 = {
         .num_modes              = 1,
         .lccr0                  = 0x07800080,
         .lccr3                  = 0x00400000,
-        .pxafb_backlight_power  = lpd270_backlight_power,
 };
 
 /* 10.4" TFT VGA (LoLo display number 7) */
@@ -361,7 +355,6 @@ static struct pxafb_mach_info sharp_lq10d368 = {
         .num_modes              = 1,
         .lccr0                  = 0x07800080,
         .lccr3                  = 0x00400000,
-        .pxafb_backlight_power  = lpd270_backlight_power,
 };
 
 /* 3.5" TFT QVGA (LoLo display number 8) */
@@ -384,7 +377,6 @@ static struct pxafb_mach_info sharp_lq035q7db02_20 = {
         .num_modes              = 1,
         .lccr0                  = 0x07800080,
         .lccr3                  = 0x00400000,
-        .pxafb_backlight_power  = lpd270_backlight_power,
 };
 
 static struct pxafb_mach_info *lpd270_lcd_to_use;
@@ -414,7 +406,7 @@ __setup("lcd=", lpd270_set_lcd);
 
 static struct platform_device *platform_devices[] __initdata = {
         &smc91x_device,
-        &lpd270_audio_device,
+        &lpd270_backlight_device,
         &lpd270_flash_device[0],
         &lpd270_flash_device[1],
 };
@@ -454,9 +446,12 @@ static void __init lpd270_init(void)
          * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
          */
         pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
+        pxa_gpio_mode(GPIO16_PWM0_MD);
 
         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
+        pxa_set_ac97_info(NULL);
+
         if (lpd270_lcd_to_use != NULL)
                 set_pxa_fb_info(lpd270_lcd_to_use);
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 7b9bdd0c6665..ac26423cd20c 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -43,6 +44,7 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mfp-pxa25x.h>
+#include <asm/arch/audio.h>
 #include <asm/arch/lubbock.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/irda.h>
@@ -196,11 +198,6 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
         // no D+ pullup; lubbock can't connect/disconnect in software
 };
 
-static struct platform_device lub_audio_device = {
-        .name           = "pxa2xx-ac97",
-        .id             = -1,
-};
-
 static struct resource sa1111_resources[] = {
         [0] = {
                 .start  = 0x10000000,
@@ -230,14 +227,6 @@ static struct pxa2xx_spi_master pxa_ssp_master_info = {
         .num_chipselect = 0,
 };
 
-static struct platform_device pxa_ssp = {
-        .name           = "pxa2xx-spi",
-        .id             = 1,
-        .dev = {
-                .platform_data  = &pxa_ssp_master_info,
-        },
-};
-
 static int lubbock_ads7846_pendown_state(void)
 {
         /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
@@ -296,11 +285,18 @@ static struct resource smc91x_resources[] = {
         },
 };
 
+static struct smc91x_platdata lubbock_smc91x_info = {
+        .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = -1,
         .num_resources  = ARRAY_SIZE(smc91x_resources),
         .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &lubbock_smc91x_info,
+        },
 };
 
 static struct resource flash_resources[] = {
@@ -368,11 +364,9 @@ static struct platform_device lubbock_flash_device[2] = {
 
 static struct platform_device *devices[] __initdata = {
         &sa1111_device,
-        &lub_audio_device,
         &smc91x_device,
         &lubbock_flash_device[0],
         &lubbock_flash_device[1],
-        &pxa_ssp,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -476,6 +470,7 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
         } else if (mode & IR_FIRMODE) {
                 LUB_MISC_WR |= 1 << 4;
         }
+        pxa2xx_transceiver_mode(dev, mode);
         local_irq_restore(flags);
 }
 
@@ -494,6 +489,7 @@ static void __init lubbock_init(void)
         set_pxa_fb_info(&sharp_lm8v31);
         pxa_set_mci_info(&lubbock_mci_platform_data);
         pxa_set_ficp_info(&lubbock_ficp_platform_data);
+        pxa_set_ac97_info(NULL);
 
         lubbock_flash_data[0].width = lubbock_flash_data[1].width =
                 (BOOT_DEF & 1) ? 2 : 4;
@@ -505,6 +501,7 @@ static void __init lubbock_init(void)
         lubbock_flash_data[flashboot].name = "boot-rom";
         (void) platform_add_devices(devices, ARRAY_SIZE(devices));
 
+        pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
         spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index badba064dc04..c9d274f0048f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -17,31 +17,32 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
 
-#include <asm/gpio.h>
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/arch/magician.h>
 #include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/i2c.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/ohci.h>
 
+#include "devices.h"
 #include "generic.h"
 
-static unsigned long magician_pin_config[] = {
+static unsigned long magician_pin_config[] __initdata = {
 
         /* SDRAM and Static Memory I/O Signals */
         GPIO20_nSDCS_2,
@@ -131,6 +132,7 @@ static unsigned long magician_pin_config[] = {
 static void magician_irda_transceiver_mode(struct device *dev, int mode)
 {
         gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data magician_ficp_info = {
@@ -348,40 +350,59 @@ static struct pxafb_mach_info samsung_info = {
  * Backlight
  */
 
-static void magician_set_bl_intensity(int intensity)
+static int magician_backlight_init(struct device *dev)
 {
-        if (intensity) {
-                PWM_CTRL0 = 1;
-                PWM_PERVAL0 = 0xc8;
-                if (intensity > 0xc7) {
-                        PWM_PWDUTY0 = intensity - 0x48;
-                        gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
-                } else {
-                        PWM_PWDUTY0 = intensity;
-                        gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
-                }
-                gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 1);
-                pxa_set_cken(CKEN_PWM0, 1);
+        int ret;
+
+        ret = gpio_request(EGPIO_MAGICIAN_BL_POWER, "BL_POWER");
+        if (ret)
+                goto err;
+        ret = gpio_request(EGPIO_MAGICIAN_BL_POWER2, "BL_POWER2");
+        if (ret)
+                goto err2;
+        return 0;
+
+err2:
+        gpio_free(EGPIO_MAGICIAN_BL_POWER);
+err:
+        return ret;
+}
+
+static int magician_backlight_notify(int brightness)
+{
+        gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
+        if (brightness >= 200) {
+                gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
+                return brightness - 72;
         } else {
-                /* PWM_PWDUTY0 = intensity; */
-                gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 0);
-                pxa_set_cken(CKEN_PWM0, 0);
+                gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
+                return brightness;
         }
 }
 
-static struct generic_bl_info backlight_info = {
-        .default_intensity = 0x64,
-        .limit_mask        = 0x0b,
-        .max_intensity     = 0xc7+0x48,
-        .set_bl_intensity  = magician_set_bl_intensity,
+static void magician_backlight_exit(struct device *dev)
+{
+        gpio_free(EGPIO_MAGICIAN_BL_POWER);
+        gpio_free(EGPIO_MAGICIAN_BL_POWER2);
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = 272,
+        .dft_brightness = 100,
+        .pwm_period_ns  = 30923,
+        .init           = magician_backlight_init,
+        .notify         = magician_backlight_notify,
+        .exit           = magician_backlight_exit,
 };
 
 static struct platform_device backlight = {
-        .name = "generic-bl",
+        .name = "pwm-backlight",
+        .id   = -1,
         .dev  = {
-                .platform_data = &backlight_info,
+                .parent        = &pxa27x_device_pwm0.dev,
+                .platform_data = &backlight_data,
         },
-        .id   = -1,
 };
 
 /*
@@ -490,6 +511,37 @@ static struct platform_device pasic3 = {
  * External power
  */
 
+static int power_supply_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+        if (ret)
+                goto err_cs_ac;
+        ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
+        if (ret)
+                goto err_cs_usb;
+        ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
+        if (ret)
+                goto err_chg_en;
+        ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
+        if (!ret)
+                ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
+        if (ret)
+                goto err_nchg_en;
+
+        return 0;
+
+err_nchg_en:
+        gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+err_chg_en:
+        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+err_cs_usb:
+        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+err_cs_ac:
+        return ret;
+}
+
 static int magician_is_ac_online(void)
 {
         return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
@@ -506,14 +558,24 @@ static void magician_set_charge(int flags)
         gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
 }
 
+static void power_supply_exit(struct device *dev)
+{
+        gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
+        gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+}
+
 static char *magician_supplicants[] = {
         "ds2760-battery.0", "backup-battery"
 };
 
 static struct pda_power_pdata power_supply_info = {
+        .init            = power_supply_init,
         .is_ac_online    = magician_is_ac_online,
         .is_usb_online   = magician_is_usb_online,
         .set_charge      = magician_set_charge,
+        .exit            = power_supply_exit,
         .supplied_to     = magician_supplicants,
         .num_supplicants = ARRAY_SIZE(magician_supplicants),
 };
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 7399fb34da4e..851ec2d9b699 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -23,9 +23,10 @@
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/backlight.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -110,9 +111,9 @@ static unsigned long mainstone_pin_config[] = {
         GPIO45_AC97_SYSCLK,
 
         /* Keypad */
-        GPIO93_KP_DKIN_0        | WAKEUP_ON_LEVEL_HIGH,
-        GPIO94_KP_DKIN_1        | WAKEUP_ON_LEVEL_HIGH,
-        GPIO95_KP_DKIN_2        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO93_KP_DKIN_0,
+        GPIO94_KP_DKIN_1,
+        GPIO95_KP_DKIN_2,
         GPIO100_KP_MKIN_0       | WAKEUP_ON_LEVEL_HIGH,
         GPIO101_KP_MKIN_1       | WAKEUP_ON_LEVEL_HIGH,
         GPIO102_KP_MKIN_2       | WAKEUP_ON_LEVEL_HIGH,
@@ -240,11 +241,19 @@ static struct resource smc91x_resources[] = {
         }
 };
 
+static struct smc91x_platdata mainstone_smc91x_info = {
+        .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+                  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = 0,
         .num_resources  = ARRAY_SIZE(smc91x_resources),
         .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &mainstone_smc91x_info,
+        },
 };
 
 static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
@@ -280,12 +289,6 @@ static pxa2xx_audio_ops_t mst_audio_ops = {
         .resume         = mst_audio_resume,
 };
 
-static struct platform_device mst_audio_device = {
-        .name           = "pxa2xx-ac97",
-        .id             = -1,
-        .dev            = { .platform_data = &mst_audio_ops },
-};
-
 static struct resource flash_resources[] = {
         [0] = {
                 .start  = PXA_CS0_PHYS,
@@ -349,56 +352,27 @@ static struct platform_device mst_flash_device[2] = {
         },
 };
 
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-static int mainstone_backlight_update_status(struct backlight_device *bl)
-{
-        int brightness = bl->props.brightness;
-
-        if (bl->props.power != FB_BLANK_UNBLANK ||
-            bl->props.fb_blank != FB_BLANK_UNBLANK)
-                brightness = 0;
-
-        if (brightness != 0)
-                pxa_set_cken(CKEN_PWM0, 1);
-
-        PWM_CTRL0 = 0;
-        PWM_PWDUTY0 = brightness;
-        PWM_PERVAL0 = bl->props.max_brightness;
-
-        if (brightness == 0)
-                pxa_set_cken(CKEN_PWM0, 0);
-        return 0; /* pointless return value */
-}
-
-static int mainstone_backlight_get_brightness(struct backlight_device *bl)
-{
-        return PWM_PWDUTY0;
-}
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data mainstone_backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = 1023,
+        .dft_brightness = 1023,
+        .pwm_period_ns  = 78770,
+};
 
-static /*const*/ struct backlight_ops mainstone_backlight_ops = {
-        .update_status  = mainstone_backlight_update_status,
-        .get_brightness = mainstone_backlight_get_brightness,
+static struct platform_device mainstone_backlight_device = {
+        .name           = "pwm-backlight",
+        .dev            = {
+                .parent = &pxa27x_device_pwm0.dev,
+                .platform_data = &mainstone_backlight_data,
+        },
 };
 
 static void __init mainstone_backlight_register(void)
 {
-        struct backlight_device *bl;
-
-        bl = backlight_device_register("mainstone-bl", &pxa_device_fb.dev,
-                                       NULL, &mainstone_backlight_ops);
-        if (IS_ERR(bl)) {
-                printk(KERN_ERR "mainstone: unable to register backlight: %ld\n",
-                       PTR_ERR(bl));
-                return;
-        }
-
-        /*
-         * broken design - register-then-setup interfaces are
-         * utterly broken by definition.
-         */
-        bl->props.max_brightness = 1023;
-        bl->props.brightness = 1023;
-        backlight_update_status(bl);
+        int ret = platform_device_register(&mainstone_backlight_device);
+        if (ret)
+                printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
 }
 #else
 #define mainstone_backlight_register()  do { } while (0)
@@ -490,6 +464,7 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
         } else if (mode & IR_FIRMODE) {
                 MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
         }
+        pxa2xx_transceiver_mode(dev, mode);
         if (mode & IR_OFF) {
                 MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
         } else {
@@ -528,7 +503,6 @@ static struct platform_device mst_gpio_keys_device = {
 
 static struct platform_device *platform_devices[] __initdata = {
         &smc91x_device,
-        &mst_audio_device,
         &mst_flash_device[0],
         &mst_flash_device[1],
         &mst_gpio_keys_device,
@@ -549,7 +523,7 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = {
         .init           = mainstone_ohci_init,
 };
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int mainstone_matrix_keys[] = {
         KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
         KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
@@ -638,6 +612,7 @@ static void __init mainstone_init(void)
         pxa_set_ficp_info(&mainstone_ficp_platform_data);
         pxa_set_ohci_info(&mainstone_ohci_platform_data);
         pxa_set_i2c_info(NULL);
+        pxa_set_ac97_info(&mst_audio_ops);
 
         mainstone_init_keypad();
 }
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 22097a1707cc..fd4545eab803 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -20,6 +20,7 @@
 
 #include <asm/arch/hardware.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mfp-pxa2xx.h>
 
 #include "generic.h"
@@ -38,6 +39,28 @@ struct gpio_desc {
 
 static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
 
+static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
+{
+        unsigned mask = GPIO_bit(gpio);
+
+        /* low power state */
+        switch (lpm) {
+        case MFP_LPM_DRIVE_HIGH:
+                PGSR(gpio) |= mask;
+                break;
+        case MFP_LPM_DRIVE_LOW:
+                PGSR(gpio) &= ~mask;
+                break;
+        case MFP_LPM_INPUT:
+                break;
+        default:
+                pr_warning("%s: invalid low power state for GPIO%d\n",
+                                __func__, gpio);
+                return -EINVAL;
+        }
+        return 0;
+}
+
 static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 {
         unsigned long gafr, mask = GPIO_bit(gpio);
@@ -56,21 +79,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
         else
                 GPDR(gpio) &= ~mask;
 
-        /* low power state */
-        switch (c & MFP_LPM_STATE_MASK) {
-        case MFP_LPM_DRIVE_HIGH:
-                PGSR(gpio) |= mask;
-                break;
-        case MFP_LPM_DRIVE_LOW:
-                PGSR(gpio) &= ~mask;
-                break;
-        case MFP_LPM_INPUT:
-                break;
-        default:
-                pr_warning("%s: invalid low power state for GPIO%d\n",
-                                __func__, gpio);
+        if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
                 return -EINVAL;
-        }
 
         /* give early warning if MFP_LPM_CAN_WAKEUP is set on the
          * configurations of those pins not able to wakeup
@@ -90,6 +100,18 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
         return 0;
 }
 
+static inline int __mfp_validate(int mfp)
+{
+        int gpio = mfp_to_gpio(mfp);
+
+        if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
+                pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+                return -1;
+        }
+
+        return gpio;
+}
+
 void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 {
         unsigned long flags;
@@ -98,13 +120,9 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 
         for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
 
-                gpio = mfp_to_gpio(MFP_PIN(*c));
-
-                if (!gpio_desc[gpio].valid) {
-                        pr_warning("%s: GPIO%d is invalid pin\n",
-                                __func__, gpio);
+                gpio = __mfp_validate(MFP_PIN(*c));
+                if (gpio < 0)
                         continue;
-                }
 
                 local_irq_save(flags);
 
@@ -115,6 +133,20 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
         }
 }
 
+void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
+{
+        unsigned long flags;
+        int gpio;
+
+        gpio = __mfp_validate(mfp);
+        if (gpio < 0)
+                return;
+
+        local_irq_save(flags);
+        __mfp_config_lpm(gpio, lpm);
+        local_irq_restore(flags);
+}
+
 int gpio_set_wake(unsigned int gpio, unsigned int on)
 {
         struct gpio_desc *d;
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
new file mode 100644
index 000000000000..408657a24f8c
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -0,0 +1,416 @@
+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author:     Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *              Alex Osborne <ato@meshy.org>
+ *              Cristiano P. <cristianop@users.sourceforge.net>
+ *              Jan Herman <2hp@seznam.cz>
+ *              Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/audio.h>
+#include <asm/arch/palmtx.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+        /* MMC */
+        GPIO32_MMC_CLK,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+        GPIO112_MMC_CMD,
+
+        /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+
+        /* IrDA */
+        GPIO46_FICP_RXD,
+        GPIO47_FICP_TXD,
+
+        /* PWM */
+        GPIO16_PWM0_OUT,
+
+        /* USB */
+        GPIO13_GPIO,
+
+        /* PCMCIA */
+        GPIO48_nPOE,
+        GPIO49_nPWE,
+        GPIO50_nPIOR,
+        GPIO51_nPIOW,
+        GPIO85_nPCE_1,
+        GPIO54_nPCE_2,
+        GPIO79_PSKTSEL,
+        GPIO55_nPREG,
+        GPIO56_nPWAIT,
+        GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
+                                void *data)
+{
+        int err = 0;
+
+        /* Setup an interrupt for detecting card insert/remove events */
+        err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
+                        IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+                        IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+                        "SD/MMC card detect", data);
+        if (err) {
+                printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+                                __func__);
+                return err;
+        }
+
+        err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
+        if (err)
+                goto pwr_err;
+
+        err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
+        if (err)
+                goto ro_err;
+
+        printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+        return 0;
+
+ro_err:
+        gpio_free(GPIO_NR_PALMTX_SD_POWER);
+pwr_err:
+        free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+        return err;
+}
+
+static void palmtx_mci_exit(struct device *dev, void *data)
+{
+        gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+        gpio_free(GPIO_NR_PALMTX_SD_POWER);
+        free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+}
+
+static void palmtx_mci_power(struct device *dev, unsigned int vdd)
+{
+        struct pxamci_platform_data *p_d = dev->platform_data;
+        gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmtx_mci_get_ro(struct device *dev)
+{
+        return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmtx_mci_platform_data = {
+        .ocr_mask       = MMC_VDD_32_33 | MMC_VDD_33_34,
+        .setpower       = palmtx_mci_power,
+        .get_ro         = palmtx_mci_get_ro,
+        .init           = palmtx_mci_init,
+        .exit           = palmtx_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmtx_matrix_keys[] = {
+        KEY(0, 0, KEY_POWER),
+        KEY(0, 1, KEY_F1),
+        KEY(0, 2, KEY_ENTER),
+
+        KEY(1, 0, KEY_F2),
+        KEY(1, 1, KEY_F3),
+        KEY(1, 2, KEY_F4),
+
+        KEY(2, 0, KEY_UP),
+        KEY(2, 2, KEY_DOWN),
+
+        KEY(3, 0, KEY_RIGHT),
+        KEY(3, 2, KEY_LEFT),
+
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+        .matrix_key_rows        = 4,
+        .matrix_key_cols        = 3,
+        .matrix_key_map         = palmtx_matrix_keys,
+        .matrix_key_map_size    = ARRAY_SIZE(palmtx_matrix_keys),
+
+        .debounce_interval      = 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+        {KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+        .buttons        = palmtx_pxa_buttons,
+        .nbuttons       = ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+        .name   = "gpio-keys",
+        .id     = -1,
+        .dev    = {
+                .platform_data = &palmtx_pxa_keys_data,
+        },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtx_backlight_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
+        if (ret)
+                goto err;
+        ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
+        if (ret)
+                goto err2;
+
+        return 0;
+err2:
+        gpio_free(GPIO_NR_PALMTX_BL_POWER);
+err:
+        return ret;
+}
+
+static int palmtx_backlight_notify(int brightness)
+{
+        gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
+        gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
+        return brightness;
+}
+
+static void palmtx_backlight_exit(struct device *dev)
+{
+        gpio_free(GPIO_NR_PALMTX_BL_POWER);
+        gpio_free(GPIO_NR_PALMTX_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtx_backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = PALMTX_MAX_INTENSITY,
+        .dft_brightness = PALMTX_MAX_INTENSITY,
+        .pwm_period_ns  = PALMTX_PERIOD_NS,
+        .init           = palmtx_backlight_init,
+        .notify         = palmtx_backlight_notify,
+        .exit           = palmtx_backlight_exit,
+};
+
+static struct platform_device palmtx_backlight = {
+        .name   = "pwm-backlight",
+        .dev    = {
+                .parent         = &pxa27x_device_pwm0.dev,
+                .platform_data  = &palmtx_backlight_data,
+        },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
+{
+        gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
+        pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+        .transceiver_cap        = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+        .transceiver_mode       = palmtx_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static void palmtx_udc_command(int cmd)
+{
+        gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
+        udelay(50);
+        gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
+}
+
+static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+        .gpio_vbus              = GPIO_NR_PALMTX_USB_DETECT_N,
+        .gpio_vbus_inverted     = 1,
+        .udc_command            = palmtx_udc_command,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
+        if (ret)
+                goto err_cs_ac;
+
+        ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+        if (ret)
+                goto err_cs_usb;
+
+        return 0;
+
+err_cs_usb:
+        gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+err_cs_ac:
+        return ret;
+}
+
+static int palmtx_is_ac_online(void)
+{
+        return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static int palmtx_is_usb_online(void)
+{
+        return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+        gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
+        gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static char *palmtx_supplicants[] = {
+        "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+        .init            = power_supply_init,
+        .is_ac_online    = palmtx_is_ac_online,
+        .is_usb_online   = palmtx_is_usb_online,
+        .exit            = power_supply_exit,
+        .supplied_to     = palmtx_supplicants,
+        .num_supplicants = ARRAY_SIZE(palmtx_supplicants),
+};
+
+static struct platform_device power_supply = {
+        .name = "pda-power",
+        .id   = -1,
+        .dev  = {
+                .platform_data = &power_supply_info,
+        },
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtx_lcd_modes[] = {
+{
+        .pixclock       = 57692,
+        .xres           = 320,
+        .yres           = 480,
+        .bpp            = 16,
+
+        .left_margin    = 32,
+        .right_margin   = 1,
+        .upper_margin   = 7,
+        .lower_margin   = 1,
+
+        .hsync_len      = 4,
+        .vsync_len      = 1,
+},
+};
+
+static struct pxafb_mach_info palmtx_lcd_screen = {
+        .modes          = palmtx_lcd_modes,
+        .num_modes      = ARRAY_SIZE(palmtx_lcd_modes),
+        .lcd_conn       = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+        &palmtx_pxa_keys,
+#endif
+        &palmtx_backlight,
+        &power_supply,
+};
+
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+        .virtual        = PALMTX_PCMCIA_VIRT,
+        .pfn            = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+        .length         = PALMTX_PCMCIA_SIZE,
+        .type           = MT_DEVICE
+},
+};
+
+static void __init palmtx_map_io(void)
+{
+        pxa_map_io();
+        iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+
+        set_pxa_fb_info(&palmtx_lcd_screen);
+        pxa_set_mci_info(&palmtx_mci_platform_data);
+        pxa_set_udc_info(&palmtx_udc_info);
+        pxa_set_ac97_info(NULL);
+        pxa_set_ficp_info(&palmtx_ficp_platform_data);
+        pxa_set_keypad_info(&palmtx_keypad_platform_data);
+
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+        .phys_io        = PALMTX_PHYS_IO_START,
+        .io_pg_offst    = io_p2v(0x40000000),
+        .boot_params    = 0xa0000100,
+        .map_io         = palmtx_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = palmtx_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 3b945eb0aee3..377f3be8ce57 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -24,7 +24,9 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
 #include <linux/leds.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/arch/hardware.h>
@@ -108,6 +110,32 @@ static struct platform_device smc91x_device = {
         .resource       = smc91x_resources,
 };
 
+/*
+ * SPI host and devices
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+        .num_chipselect = 1,
+};
+
+static struct max7301_platform_data max7301_info = {
+        .base = -1,
+};
+
+/* bus_num must match id in pxa2xx_set_spi_info() call */
+static struct spi_board_info spi_board_info[] __initdata = {
+        {
+                .modalias       = "max7301",
+                .platform_data  = &max7301_info,
+                .max_speed_hz   = 13000000,
+                .bus_num        = 1,
+                .chip_select    = 0,
+                .mode           = SPI_MODE_0,
+        },
+};
+
+/*
+ * NOR flash
+ */
 static struct physmap_flash_data pcm027_flash_data = {
         .width  = 4,
 };
@@ -190,6 +218,9 @@ static void __init pcm027_init(void)
 #ifdef CONFIG_MACH_PCM990_BASEBOARD
         pcm990_baseboard_init();
 #endif
+
+        pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+        spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
 static void __init pcm027_map_io(void)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 49d951db0f3d..30023b00e476 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/ide.h>
 #include <linux/i2c.h>
+#include <linux/pwm_backlight.h>
 
 #include <media/soc_camera.h>
 
@@ -32,13 +33,120 @@
 #include <asm/arch/camera.h>
 #include <asm/mach/map.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/audio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pcm990_baseboard.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mfp-pxa27x.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+        /* MMC */
+        GPIO32_MMC_CLK,
+        GPIO112_MMC_CMD,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+        /* USB */
+        GPIO88_USBH1_PWR,
+        GPIO89_USBH1_PEN,
+        /* PWM0 */
+        GPIO16_PWM0_OUT,
+};
 
 /*
- * The PCM-990 development baseboard uses PCM-027's hardeware in the
+ * pcm990_lcd_power - control power supply to the LCD
+ * @on: 0 = switch off, 1 = switch on
+ *
+ * Called by the pxafb driver
+ */
+#ifndef CONFIG_PCM990_DISPLAY_NONE
+static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+        if (on) {
+                /* enable LCD-Latches
+                 * power on LCD
+                 */
+                __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) =
+                        PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON;
+        } else {
+                /* disable LCD-Latches
+                 * power off LCD
+                 */
+                __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = 0x00;
+        }
+}
+#endif
+
+#if defined(CONFIG_PCM990_DISPLAY_SHARP)
+static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
+        .pixclock               = 28000,
+        .xres                   = 640,
+        .yres                   = 480,
+        .bpp                    = 16,
+        .hsync_len              = 20,
+        .left_margin            = 103,
+        .right_margin           = 47,
+        .vsync_len              = 6,
+        .upper_margin           = 28,
+        .lower_margin           = 5,
+        .sync                   = 0,
+        .cmap_greyscale         = 0,
+};
+
+static struct pxafb_mach_info pcm990_fbinfo __initdata = {
+        .modes                  = &fb_info_sharp_lq084v1dg21,
+        .num_modes              = 1,
+        .lccr0                  = LCCR0_PAS,
+        .lccr3                  = LCCR3_PCP,
+        .pxafb_lcd_power        = pcm990_lcd_power,
+};
+#elif defined(CONFIG_PCM990_DISPLAY_NEC)
+struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
+        .pixclock               = 39720,
+        .xres                   = 640,
+        .yres                   = 480,
+        .bpp                    = 16,
+        .hsync_len              = 32,
+        .left_margin            = 16,
+        .right_margin           = 48,
+        .vsync_len              = 2,
+        .upper_margin           = 12,
+        .lower_margin           = 17,
+        .sync                   = 0,
+        .cmap_greyscale         = 0,
+};
+
+static struct pxafb_mach_info pcm990_fbinfo __initdata = {
+        .modes                  = &fb_info_nec_nl6448bc20_18d,
+        .num_modes              = 1,
+        .lccr0                  = LCCR0_Act,
+        .lccr3                  = LCCR3_PixFlEdg,
+        .pxafb_lcd_power        = pcm990_lcd_power,
+};
+#endif
+
+static struct platform_pwm_backlight_data pcm990_backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = 1023,
+        .dft_brightness = 1023,
+        .pwm_period_ns  = 78770,
+};
+
+static struct platform_device pcm990_backlight_device = {
+        .name           = "pwm-backlight",
+        .dev            = {
+                .parent = &pxa27x_device_pwm0.dev,
+                .platform_data = &pcm990_backlight_data,
+        },
+};
+
+/*
+ * The PCM-990 development baseboard uses PCM-027's hardware in the
  * following way:
  *
  * - LCD support is in use
@@ -185,16 +293,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 {
         int err;
 
-        /*
-         * enable GPIO for PXA27x MMC controller
-         */
-        pxa_gpio_mode(GPIO32_MMCCLK_MD);
-        pxa_gpio_mode(GPIO112_MMCCMD_MD);
-        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
         err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
                              "MMC card detect", data);
         if (err)
@@ -241,8 +339,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
  */
 static int pcm990_ohci_init(struct device *dev)
 {
-        pxa_gpio_mode(PCM990_USB_OVERCURRENT);
-        pxa_gpio_mode(PCM990_USB_PWR_EN);
         /*
          * disable USB port 2 and 3
          * power sense is active low
@@ -269,23 +365,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = {
  * PXA27x Camera specific stuff
  */
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+        /* CIF */
+        GPIO98_CIF_DD_0,
+        GPIO105_CIF_DD_1,
+        GPIO104_CIF_DD_2,
+        GPIO103_CIF_DD_3,
+        GPIO95_CIF_DD_4,
+        GPIO94_CIF_DD_5,
+        GPIO93_CIF_DD_6,
+        GPIO108_CIF_DD_7,
+        GPIO107_CIF_DD_8,
+        GPIO106_CIF_DD_9,
+        GPIO42_CIF_MCLK,
+        GPIO45_CIF_PCLK,
+        GPIO43_CIF_FV,
+        GPIO44_CIF_LV,
+};
+
 static int pcm990_pxacamera_init(struct device *dev)
 {
-        pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
-        pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
-        pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
-        pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
-        pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
-        pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
-        pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
-        pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
-        pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
-        pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
-        pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
-        pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
-        pxa_gpio_mode(GPIO43_CIF_FV_MD);
-        pxa_gpio_mode(GPIO44_CIF_LV_MD);
-
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
         return 0;
 }
 
@@ -333,36 +433,6 @@ static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
 
 /*
- * AC97 support
- * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ
- */
-static struct resource pxa27x_ac97_resources[] = {
-        [0] = {
-                .start  = 0x40500000,
-                .end    = 0x40500000 + 0xfff,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = IRQ_AC97,
-                .end    = IRQ_AC97,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static u64 pxa_ac97_dmamask = 0xffffffffUL;
-
-static struct platform_device pxa27x_device_ac97 = {
-        .name           = "pxa2xx-ac97",
-        .id             = -1,
-        .dev            = {
-                .dma_mask = &pxa_ac97_dmamask,
-                .coherent_dma_mask = 0xffffffff,
-        },
-        .num_resources  = ARRAY_SIZE(pxa27x_ac97_resources),
-        .resource       = pxa27x_ac97_resources,
-};
-
-/*
  * enable generic access to the base board control CPLDs U6 and U7
  */
 static struct map_desc pcm990_io_desc[] __initdata = {
@@ -387,13 +457,18 @@ static struct map_desc pcm990_io_desc[] __initdata = {
  */
 void __init pcm990_baseboard_init(void)
 {
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
         /* register CPLD access */
-        iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+        iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
 
         /* register CPLD's IRQ controller */
         pcm990_init_irq();
 
-        platform_device_register(&pxa27x_device_ac97);
+#ifndef CONFIG_PCM990_DISPLAY_NONE
+        set_pxa_fb_info(&pcm990_fbinfo);
+#endif
+        platform_device_register(&pcm990_backlight_device);
 
         /* MMC */
         pxa_set_mci_info(&pcm990_mci_platform_data);
@@ -402,13 +477,13 @@ void __init pcm990_baseboard_init(void)
         pxa_set_ohci_info(&pcm990_ohci_platform_data);
 
         pxa_set_i2c_info(NULL);
+        pxa_set_ac97_info(NULL);
 
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
         pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
-        i2c_register_board_info(0, pcm990_i2c_devices,
-                ARRAY_SIZE(pcm990_i2c_devices));
+        i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
 #endif
 
-        printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+        printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
 }
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 0b30f25cff3c..39612cfa0b4d 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -32,6 +32,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
@@ -266,6 +267,7 @@ static void poodle_irda_transceiver_mode(struct device *dev, int mode)
         } else {
                 GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
         }
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
new file mode 100644
index 000000000000..ce28cd9fed16
--- /dev/null
+++ b/arch/arm/mach-pxa/pwm.c
@@ -0,0 +1,319 @@
+/*
+ * linux/arch/arm/mach-pxa/pwm.c
+ *
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 2008-02-13   initial version
+ *              eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+#include <asm/arch/pxa-regs.h>
+
+/* PWM registers and bits definitions */
+#define PWMCR           (0x00)
+#define PWMDCR          (0x04)
+#define PWMPCR          (0x08)
+
+#define PWMCR_SD        (1 << 6)
+#define PWMDCR_FD       (1 << 10)
+
+struct pwm_device {
+        struct list_head        node;
+        struct platform_device *pdev;
+
+        const char      *label;
+        struct clk      *clk;
+        int             clk_enabled;
+        void __iomem    *mmio_base;
+
+        unsigned int    use_count;
+        unsigned int    pwm_id;
+};
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+        unsigned long long c;
+        unsigned long period_cycles, prescale, pv, dc;
+
+        if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+                return -EINVAL;
+
+        c = clk_get_rate(pwm->clk);
+        c = c * period_ns;
+        do_div(c, 1000000000);
+        period_cycles = c;
+
+        if (period_cycles < 0)
+                period_cycles = 1;
+        prescale = (period_cycles - 1) / 1024;
+        pv = period_cycles / (prescale + 1) - 1;
+
+        if (prescale > 63)
+                return -EINVAL;
+
+        if (duty_ns == period_ns)
+                dc = PWMDCR_FD;
+        else
+                dc = (pv + 1) * duty_ns / period_ns;
+
+        /* NOTE: the clock to PWM has to be enabled first
+         * before writing to the registers
+         */
+        clk_enable(pwm->clk);
+        __raw_writel(prescale, pwm->mmio_base + PWMCR);
+        __raw_writel(dc, pwm->mmio_base + PWMDCR);
+        __raw_writel(pv, pwm->mmio_base + PWMPCR);
+        clk_disable(pwm->clk);
+
+        return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+        int rc = 0;
+
+        if (!pwm->clk_enabled) {
+                rc = clk_enable(pwm->clk);
+                if (!rc)
+                        pwm->clk_enabled = 1;
+        }
+        return rc;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+        if (pwm->clk_enabled) {
+                clk_disable(pwm->clk);
+                pwm->clk_enabled = 0;
+        }
+}
+EXPORT_SYMBOL(pwm_disable);
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+        struct pwm_device *pwm;
+        int found = 0;
+
+        mutex_lock(&pwm_lock);
+
+        list_for_each_entry(pwm, &pwm_list, node) {
+                if (pwm->pwm_id == pwm_id) {
+                        found = 1;
+                        break;
+                }
+        }
+
+        if (found) {
+                if (pwm->use_count == 0) {
+                        pwm->use_count++;
+                        pwm->label = label;
+                } else
+                        pwm = ERR_PTR(-EBUSY);
+        } else
+                pwm = ERR_PTR(-ENOENT);
+
+        mutex_unlock(&pwm_lock);
+        return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+        mutex_lock(&pwm_lock);
+
+        if (pwm->use_count) {
+                pwm->use_count--;
+                pwm->label = NULL;
+        } else
+                pr_warning("PWM device already freed\n");
+
+        mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static inline void __add_pwm(struct pwm_device *pwm)
+{
+        mutex_lock(&pwm_lock);
+        list_add_tail(&pwm->node, &pwm_list);
+        mutex_unlock(&pwm_lock);
+}
+
+static struct pwm_device *pwm_probe(struct platform_device *pdev,
+                unsigned int pwm_id, struct pwm_device *parent_pwm)
+{
+        struct pwm_device *pwm;
+        struct resource *r;
+        int ret = 0;
+
+        pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+        if (pwm == NULL) {
+                dev_err(&pdev->dev, "failed to allocate memory\n");
+                return ERR_PTR(-ENOMEM);
+        }
+
+        pwm->clk = clk_get(&pdev->dev, "PWMCLK");
+        if (IS_ERR(pwm->clk)) {
+                ret = PTR_ERR(pwm->clk);
+                goto err_free;
+        }
+        pwm->clk_enabled = 0;
+
+        pwm->use_count = 0;
+        pwm->pwm_id = pwm_id;
+        pwm->pdev = pdev;
+
+        if (parent_pwm != NULL) {
+                /* registers for the second PWM has offset of 0x10 */
+                pwm->mmio_base = parent_pwm->mmio_base + 0x10;
+                __add_pwm(pwm);
+                return pwm;
+        }
+
+        r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (r == NULL) {
+                dev_err(&pdev->dev, "no memory resource defined\n");
+                ret = -ENODEV;
+                goto err_free_clk;
+        }
+
+        r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+        if (r == NULL) {
+                dev_err(&pdev->dev, "failed to request memory resource\n");
+                ret = -EBUSY;
+                goto err_free_clk;
+        }
+
+        pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+        if (pwm->mmio_base == NULL) {
+                dev_err(&pdev->dev, "failed to ioremap() registers\n");
+                ret = -ENODEV;
+                goto err_free_mem;
+        }
+
+        __add_pwm(pwm);
+        platform_set_drvdata(pdev, pwm);
+        return pwm;
+
+err_free_mem:
+        release_mem_region(r->start, r->end - r->start + 1);
+err_free_clk:
+        clk_put(pwm->clk);
+err_free:
+        kfree(pwm);
+        return ERR_PTR(ret);
+}
+
+static int __devinit pxa25x_pwm_probe(struct platform_device *pdev)
+{
+        struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
+
+        if (IS_ERR(pwm))
+                return PTR_ERR(pwm);
+
+        return 0;
+}
+
+static int __devinit pxa27x_pwm_probe(struct platform_device *pdev)
+{
+        struct pwm_device *pwm;
+
+        pwm = pwm_probe(pdev, pdev->id, NULL);
+        if (IS_ERR(pwm))
+                return PTR_ERR(pwm);
+
+        pwm = pwm_probe(pdev, pdev->id + 2, pwm);
+        if (IS_ERR(pwm))
+                return PTR_ERR(pwm);
+
+        return 0;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+        struct pwm_device *pwm;
+        struct resource *r;
+
+        pwm = platform_get_drvdata(pdev);
+        if (pwm == NULL)
+                return -ENODEV;
+
+        mutex_lock(&pwm_lock);
+        list_del(&pwm->node);
+        mutex_unlock(&pwm_lock);
+
+        iounmap(pwm->mmio_base);
+
+        r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        release_mem_region(r->start, r->end - r->start + 1);
+
+        clk_put(pwm->clk);
+        kfree(pwm);
+        return 0;
+}
+
+static struct platform_driver pxa25x_pwm_driver = {
+        .driver         = {
+                .name   = "pxa25x-pwm",
+        },
+        .probe          = pxa25x_pwm_probe,
+        .remove         = __devexit_p(pwm_remove),
+};
+
+static struct platform_driver pxa27x_pwm_driver = {
+        .driver         = {
+                .name   = "pxa27x-pwm",
+        },
+        .probe          = pxa27x_pwm_probe,
+        .remove         = __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+        int ret = 0;
+
+        ret = platform_driver_register(&pxa25x_pwm_driver);
+        if (ret) {
+                printk(KERN_ERR "failed to register pxa25x_pwm_driver\n");
+                return ret;
+        }
+
+        ret = platform_driver_register(&pxa27x_pwm_driver);
+        if (ret) {
+                printk(KERN_ERR "failed to register pxa27x_pwm_driver\n");
+                return ret;
+        }
+
+        return ret;
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+        platform_driver_unregister(&pxa25x_pwm_driver);
+        platform_driver_unregister(&pxa27x_pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index e5b417d14bb0..c5b845b935bb 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -26,6 +26,7 @@
 #include <asm/hardware.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mfp-pxa25x.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/dma.h>
@@ -108,6 +109,52 @@ static const struct clkops clk_pxa25x_lcd_ops = {
         .getrate        = clk_pxa25x_lcd_getrate,
 };
 
+static unsigned long gpio12_config_32k[] = {
+        GPIO12_32KHz,
+};
+
+static unsigned long gpio12_config_gpio[] = {
+        GPIO12_GPIO,
+};
+
+static void clk_gpio12_enable(struct clk *clk)
+{
+        pxa2xx_mfp_config(gpio12_config_32k, 1);
+}
+
+static void clk_gpio12_disable(struct clk *clk)
+{
+        pxa2xx_mfp_config(gpio12_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio12_ops = {
+        .enable         = clk_gpio12_enable,
+        .disable        = clk_gpio12_disable,
+};
+
+static unsigned long gpio11_config_3m6[] = {
+        GPIO11_3_6MHz,
+};
+
+static unsigned long gpio11_config_gpio[] = {
+        GPIO11_GPIO,
+};
+
+static void clk_gpio11_enable(struct clk *clk)
+{
+        pxa2xx_mfp_config(gpio11_config_3m6, 1);
+}
+
+static void clk_gpio11_disable(struct clk *clk)
+{
+        pxa2xx_mfp_config(gpio11_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio11_ops = {
+        .enable         = clk_gpio11_enable,
+        .disable        = clk_gpio11_disable,
+};
+
 /*
  * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
@@ -117,29 +164,40 @@ static struct clk pxa25x_hwuart_clk =
         INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev)
 ;
 
+/*
+ * PXA 2xx clock declarations. Order is important (see aliases below)
+ * Please be careful not to disrupt the ordering.
+ */
 static struct clk pxa25x_clks[] = {
         INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
         INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev),
         INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
         INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
-        INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev),
+        INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
+        INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
+        INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
         INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
         INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
 
         INIT_CKEN("SSPCLK",  SSP, 3686400, 0, &pxa25x_device_ssp.dev),
         INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev),
         INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev),
+        INIT_CKEN("PWMCLK", PWM0, 3686400, 0, &pxa25x_device_pwm0.dev),
+        INIT_CKEN("PWMCLK", PWM1, 3686400, 0, &pxa25x_device_pwm1.dev),
 
         INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
 
         /*
-        INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
-        INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
         INIT_CKEN("I2SCLK",  I2S,  14745600, 0, NULL),
         */
         INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
 };
 
+static struct clk pxa2xx_clk_aliases[] = {
+        INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
+        INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
+};
+
 #ifdef CONFIG_PM
 
 #define SAVE(x)         sleep_save[SLEEP_SAVE_##x] = x
@@ -260,7 +318,7 @@ void __init pxa25x_init_irq(void)
 }
 
 static struct platform_device *pxa25x_devices[] __initdata = {
-        &pxa_device_udc,
+        &pxa25x_device_udc,
         &pxa_device_ffuart,
         &pxa_device_btuart,
         &pxa_device_stuart,
@@ -269,6 +327,8 @@ static struct platform_device *pxa25x_devices[] __initdata = {
         &pxa25x_device_ssp,
         &pxa25x_device_nssp,
         &pxa25x_device_assp,
+        &pxa25x_device_pwm0,
+        &pxa25x_device_pwm1,
 };
 
 static struct sys_device pxa25x_sysdev[] = {
@@ -284,7 +344,7 @@ static int __init pxa25x_init(void)
         int i, ret = 0;
 
         /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-        if (cpu_is_pxa25x())
+        if (cpu_is_pxa255())
                 clks_register(&pxa25x_hwuart_clk, 1);
 
         if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
@@ -308,9 +368,11 @@ static int __init pxa25x_init(void)
         }
 
         /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-        if (cpu_is_pxa25x())
+        if (cpu_is_pxa255())
                 ret = platform_device_register(&pxa_device_hwuart);
 
+        clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
+
         return ret;
 }
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 7e945836e129..d5d14ea33f27 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -146,7 +146,7 @@ static struct clk pxa27x_clks[] = {
 
         INIT_CKEN("I2SCLK",  I2S,  14682000, 0, &pxa_device_i2s.dev),
         INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
-        INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa_device_udc.dev),
+        INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa27x_device_udc.dev),
         INIT_CKEN("MMCCLK",  MMC,  19500000, 0, &pxa_device_mci.dev),
         INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),
 
@@ -157,12 +157,13 @@ static struct clk pxa27x_clks[] = {
         INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
         INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
         INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
+        INIT_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev),
+        INIT_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev),
 
         INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
         INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL),
 
         /*
-        INIT_CKEN("PWMCLK",  PWM0, 13000000, 0, NULL),
         INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
         INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
         INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
@@ -349,11 +350,14 @@ struct platform_device pxa27x_device_i2c_power = {
 
 void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 {
+        local_irq_disable();
+        PCFR |= PCFR_PI2CEN;
+        local_irq_enable();
         pxa27x_device_i2c_power.dev.platform_data = info;
 }
 
 static struct platform_device *devices[] __initdata = {
-        &pxa_device_udc,
+        &pxa27x_device_udc,
         &pxa_device_ffuart,
         &pxa_device_btuart,
         &pxa_device_stuart,
@@ -363,6 +367,8 @@ static struct platform_device *devices[] __initdata = {
         &pxa27x_device_ssp1,
         &pxa27x_device_ssp2,
         &pxa27x_device_ssp3,
+        &pxa27x_device_pwm0,
+        &pxa27x_device_pwm1,
 };
 
 static struct sys_device pxa27x_sysdev[] = {
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
new file mode 100644
index 000000000000..d4f6415e8413
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa2xx.c
+ *
+ * code specific to pxa2xx
+ *
+ * Copyright (C) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include <asm/arch/mfp-pxa2xx.h>
+#include <asm/arch/mfp-pxa25x.h>
+#include <asm/arch/irda.h>
+
+static unsigned long pxa2xx_mfp_fir[] = {
+        GPIO46_FICP_RXD,
+        GPIO47_FICP_TXD,
+};
+
+static unsigned long pxa2xx_mfp_sir[] = {
+        GPIO46_STUART_RXD,
+        GPIO47_STUART_TXD,
+};
+
+static unsigned long pxa2xx_mfp_off[] = {
+        GPIO46_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
+};
+
+void pxa2xx_transceiver_mode(struct device *dev, int mode)
+{
+        if (mode & IR_OFF) {
+                pxa2xx_mfp_config(pxa2xx_mfp_off, ARRAY_SIZE(pxa2xx_mfp_off));
+        } else if (mode & IR_SIRMODE) {
+                pxa2xx_mfp_config(pxa2xx_mfp_sir, ARRAY_SIZE(pxa2xx_mfp_sir));
+        } else if (mode & IR_FIRMODE) {
+                pxa2xx_mfp_config(pxa2xx_mfp_fir, ARRAY_SIZE(pxa2xx_mfp_fir));
+        } else
+                BUG();
+}
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 0a0d3877f212..da92e9733886 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -15,10 +15,16 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
 #include <asm/arch/mfp-pxa300.h>
 
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
 static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 
         MFP_ADDR_X(GPIO0,   GPIO2,   0x00b4),
@@ -79,15 +85,26 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
         MFP_ADDR_END,
 };
 
+static struct clk common_clks[] = {
+        PXA3xx_CKEN("NANDCLK", NAND, 156000000, 0, &pxa3xx_device_nand.dev),
+};
+
+static struct clk pxa310_clks[] = {
+        PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+};
+
 static int __init pxa300_init(void)
 {
         if (cpu_is_pxa300() || cpu_is_pxa310()) {
                 pxa3xx_init_mfp();
                 pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+                clks_register(ARRAY_AND_SIZE(common_clks));
         }
 
-        if (cpu_is_pxa310())
+        if (cpu_is_pxa310()) {
                 pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+                clks_register(ARRAY_AND_SIZE(pxa310_clks));
+        }
 
         return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 74128eb8f8d0..c557c23a1efe 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -15,11 +15,17 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/arch/mfp.h>
+#include <asm/arch/pxa3xx-regs.h>
 #include <asm/arch/mfp-pxa320.h>
 
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
 static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 
         MFP_ADDR_X(GPIO0,  GPIO4,   0x0124),
@@ -74,16 +80,17 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
         MFP_ADDR_END,
 };
 
-static void __init pxa320_init_mfp(void)
-{
-        pxa3xx_init_mfp();
-        pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
-}
+static struct clk pxa320_clks[] = {
+        PXA3xx_CKEN("NANDCLK", NAND, 104000000, 0, &pxa3xx_device_nand.dev),
+};
 
 static int __init pxa320_init(void)
 {
-        if (cpu_is_pxa320())
-                pxa320_init_mfp();
+        if (cpu_is_pxa320()) {
+                pxa3xx_init_mfp();
+                pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+                clks_register(ARRAY_AND_SIZE(pxa320_clks));
+        }
 
         return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 644550bfa330..f491025a0c82 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -144,7 +144,7 @@ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
         return hsio_clk;
 }
 
-static void clk_pxa3xx_cken_enable(struct clk *clk)
+void clk_pxa3xx_cken_enable(struct clk *clk)
 {
         unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -154,7 +154,7 @@ static void clk_pxa3xx_cken_enable(struct clk *clk)
                 CKENB |= mask;
 }
 
-static void clk_pxa3xx_cken_disable(struct clk *clk)
+void clk_pxa3xx_cken_disable(struct clk *clk)
 {
         unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -164,7 +164,7 @@ static void clk_pxa3xx_cken_disable(struct clk *clk)
                 CKENB &= ~mask;
 }
 
-static const struct clkops clk_pxa3xx_cken_ops = {
+const struct clkops clk_pxa3xx_cken_ops = {
         .enable         = clk_pxa3xx_cken_enable,
         .disable        = clk_pxa3xx_cken_disable,
 };
@@ -196,24 +196,6 @@ static const struct clkops clk_pout_ops = {
         .disable        = clk_pout_disable,
 };
 
-#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)  \
-        {                                               \
-                .name   = _name,                        \
-                .dev    = _dev,                         \
-                .ops    = &clk_pxa3xx_cken_ops,         \
-                .rate   = _rate,                        \
-                .cken   = CKEN_##_cken,                 \
-                .delay  = _delay,                       \
-        }
-
-#define PXA3xx_CK(_name, _cken, _ops, _dev)             \
-        {                                               \
-                .name   = _name,                        \
-                .dev    = _dev,                         \
-                .ops    = _ops,                         \
-                .cken   = CKEN_##_cken,                 \
-        }
-
 static struct clk pxa3xx_clks[] = {
         {
                 .name           = "CLK_POUT",
@@ -231,7 +213,7 @@ static struct clk pxa3xx_clks[] = {
         PXA3xx_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
 
         PXA3xx_CKEN("I2CCLK", I2C,  32842000, 0, &pxa_device_i2c.dev),
-        PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa_device_udc.dev),
+        PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa27x_device_udc.dev),
         PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
         PXA3xx_CKEN("KBDCLK", KEYPAD,  32768, 0, &pxa27x_device_keypad.dev),
 
@@ -239,10 +221,11 @@ static struct clk pxa3xx_clks[] = {
         PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
         PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
         PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev),
+        PXA3xx_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev),
+        PXA3xx_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev),
 
         PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
         PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
-        PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
 };
 
 #ifdef CONFIG_PM
@@ -520,7 +503,7 @@ void __init pxa3xx_init_irq(void)
  */
 
 static struct platform_device *devices[] __initdata = {
-        &pxa_device_udc,
+/*      &pxa_device_udc,        The UDC driver is PXA25x only */
         &pxa_device_ffuart,
         &pxa_device_btuart,
         &pxa_device_stuart,
@@ -530,6 +513,8 @@ static struct platform_device *devices[] __initdata = {
         &pxa27x_device_ssp2,
         &pxa27x_device_ssp3,
         &pxa3xx_device_ssp4,
+        &pxa27x_device_pwm0,
+        &pxa27x_device_pwm1,
 };
 
 static struct sys_device pxa3xx_sysdev[] = {
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
new file mode 100644
index 000000000000..9503897d049c
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -0,0 +1,190 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa930.c
+ *
+ * Code specific to PXA930
+ *
+ * Copyright (C) 2007-2008 Marvell Internation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp-pxa930.h>
+
+static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+
+        MFP_ADDR(GPIO0, 0x02e0),
+        MFP_ADDR(GPIO1, 0x02dc),
+        MFP_ADDR(GPIO2, 0x02e8),
+        MFP_ADDR(GPIO3, 0x02d8),
+        MFP_ADDR(GPIO4, 0x02e4),
+        MFP_ADDR(GPIO5, 0x02ec),
+        MFP_ADDR(GPIO6, 0x02f8),
+        MFP_ADDR(GPIO7, 0x02fc),
+        MFP_ADDR(GPIO8, 0x0300),
+        MFP_ADDR(GPIO9, 0x02d4),
+        MFP_ADDR(GPIO10, 0x02f4),
+        MFP_ADDR(GPIO11, 0x02f0),
+        MFP_ADDR(GPIO12, 0x0304),
+        MFP_ADDR(GPIO13, 0x0310),
+        MFP_ADDR(GPIO14, 0x0308),
+        MFP_ADDR(GPIO15, 0x030c),
+        MFP_ADDR(GPIO16, 0x04e8),
+        MFP_ADDR(GPIO17, 0x04f4),
+        MFP_ADDR(GPIO18, 0x04f8),
+        MFP_ADDR(GPIO19, 0x04fc),
+        MFP_ADDR(GPIO20, 0x0518),
+        MFP_ADDR(GPIO21, 0x051c),
+        MFP_ADDR(GPIO22, 0x04ec),
+        MFP_ADDR(GPIO23, 0x0500),
+        MFP_ADDR(GPIO24, 0x04f0),
+        MFP_ADDR(GPIO25, 0x0504),
+        MFP_ADDR(GPIO26, 0x0510),
+        MFP_ADDR(GPIO27, 0x0514),
+        MFP_ADDR(GPIO28, 0x0520),
+        MFP_ADDR(GPIO29, 0x0600),
+        MFP_ADDR(GPIO30, 0x0618),
+        MFP_ADDR(GPIO31, 0x0610),
+        MFP_ADDR(GPIO32, 0x060c),
+        MFP_ADDR(GPIO33, 0x061c),
+        MFP_ADDR(GPIO34, 0x0620),
+        MFP_ADDR(GPIO35, 0x0628),
+        MFP_ADDR(GPIO36, 0x062c),
+        MFP_ADDR(GPIO37, 0x0630),
+        MFP_ADDR(GPIO38, 0x0634),
+        MFP_ADDR(GPIO39, 0x0638),
+        MFP_ADDR(GPIO40, 0x063c),
+        MFP_ADDR(GPIO41, 0x0614),
+        MFP_ADDR(GPIO42, 0x0624),
+        MFP_ADDR(GPIO43, 0x0608),
+        MFP_ADDR(GPIO44, 0x0604),
+        MFP_ADDR(GPIO45, 0x050c),
+        MFP_ADDR(GPIO46, 0x0508),
+        MFP_ADDR(GPIO47, 0x02bc),
+        MFP_ADDR(GPIO48, 0x02b4),
+        MFP_ADDR(GPIO49, 0x02b8),
+        MFP_ADDR(GPIO50, 0x02c8),
+        MFP_ADDR(GPIO51, 0x02c0),
+        MFP_ADDR(GPIO52, 0x02c4),
+        MFP_ADDR(GPIO53, 0x02d0),
+        MFP_ADDR(GPIO54, 0x02cc),
+        MFP_ADDR(GPIO55, 0x029c),
+        MFP_ADDR(GPIO56, 0x02a0),
+        MFP_ADDR(GPIO57, 0x0294),
+        MFP_ADDR(GPIO58, 0x0298),
+        MFP_ADDR(GPIO59, 0x02a4),
+        MFP_ADDR(GPIO60, 0x02a8),
+        MFP_ADDR(GPIO61, 0x02b0),
+        MFP_ADDR(GPIO62, 0x02ac),
+        MFP_ADDR(GPIO63, 0x0640),
+        MFP_ADDR(GPIO64, 0x065c),
+        MFP_ADDR(GPIO65, 0x0648),
+        MFP_ADDR(GPIO66, 0x0644),
+        MFP_ADDR(GPIO67, 0x0674),
+        MFP_ADDR(GPIO68, 0x0658),
+        MFP_ADDR(GPIO69, 0x0654),
+        MFP_ADDR(GPIO70, 0x0660),
+        MFP_ADDR(GPIO71, 0x0668),
+        MFP_ADDR(GPIO72, 0x0664),
+        MFP_ADDR(GPIO73, 0x0650),
+        MFP_ADDR(GPIO74, 0x066c),
+        MFP_ADDR(GPIO75, 0x064c),
+        MFP_ADDR(GPIO76, 0x0670),
+        MFP_ADDR(GPIO77, 0x0678),
+        MFP_ADDR(GPIO78, 0x067c),
+        MFP_ADDR(GPIO79, 0x0694),
+        MFP_ADDR(GPIO80, 0x069c),
+        MFP_ADDR(GPIO81, 0x06a0),
+        MFP_ADDR(GPIO82, 0x06a4),
+        MFP_ADDR(GPIO83, 0x0698),
+        MFP_ADDR(GPIO84, 0x06bc),
+        MFP_ADDR(GPIO85, 0x06b4),
+        MFP_ADDR(GPIO86, 0x06b0),
+        MFP_ADDR(GPIO87, 0x06c0),
+        MFP_ADDR(GPIO88, 0x06c4),
+        MFP_ADDR(GPIO89, 0x06ac),
+        MFP_ADDR(GPIO90, 0x0680),
+        MFP_ADDR(GPIO91, 0x0684),
+        MFP_ADDR(GPIO92, 0x0688),
+        MFP_ADDR(GPIO93, 0x0690),
+        MFP_ADDR(GPIO94, 0x068c),
+        MFP_ADDR(GPIO95, 0x06a8),
+        MFP_ADDR(GPIO96, 0x06b8),
+        MFP_ADDR(GPIO97, 0x0410),
+        MFP_ADDR(GPIO98, 0x0418),
+        MFP_ADDR(GPIO99, 0x041c),
+        MFP_ADDR(GPIO100, 0x0414),
+        MFP_ADDR(GPIO101, 0x0408),
+        MFP_ADDR(GPIO102, 0x0324),
+        MFP_ADDR(GPIO103, 0x040c),
+        MFP_ADDR(GPIO104, 0x0400),
+        MFP_ADDR(GPIO105, 0x0328),
+        MFP_ADDR(GPIO106, 0x0404),
+
+        MFP_ADDR(nXCVREN, 0x0204),
+        MFP_ADDR(DF_CLE_nOE, 0x020c),
+        MFP_ADDR(DF_nADV1_ALE, 0x0218),
+        MFP_ADDR(DF_SCLK_E, 0x0214),
+        MFP_ADDR(DF_SCLK_S, 0x0210),
+        MFP_ADDR(nBE0, 0x021c),
+        MFP_ADDR(nBE1, 0x0220),
+        MFP_ADDR(DF_nADV2_ALE, 0x0224),
+        MFP_ADDR(DF_INT_RnB, 0x0228),
+        MFP_ADDR(DF_nCS0, 0x022c),
+        MFP_ADDR(DF_nCS1, 0x0230),
+        MFP_ADDR(nLUA, 0x0254),
+        MFP_ADDR(nLLA, 0x0258),
+        MFP_ADDR(DF_nWE, 0x0234),
+        MFP_ADDR(DF_nRE_nOE, 0x0238),
+        MFP_ADDR(DF_ADDR0, 0x024c),
+        MFP_ADDR(DF_ADDR1, 0x0250),
+        MFP_ADDR(DF_ADDR2, 0x025c),
+        MFP_ADDR(DF_ADDR3, 0x0260),
+        MFP_ADDR(DF_IO0, 0x023c),
+        MFP_ADDR(DF_IO1, 0x0240),
+        MFP_ADDR(DF_IO2, 0x0244),
+        MFP_ADDR(DF_IO3, 0x0248),
+        MFP_ADDR(DF_IO4, 0x0264),
+        MFP_ADDR(DF_IO5, 0x0268),
+        MFP_ADDR(DF_IO6, 0x026c),
+        MFP_ADDR(DF_IO7, 0x0270),
+        MFP_ADDR(DF_IO8, 0x0274),
+        MFP_ADDR(DF_IO9, 0x0278),
+        MFP_ADDR(DF_IO10, 0x027c),
+        MFP_ADDR(DF_IO11, 0x0280),
+        MFP_ADDR(DF_IO12, 0x0284),
+        MFP_ADDR(DF_IO13, 0x0288),
+        MFP_ADDR(DF_IO14, 0x028c),
+        MFP_ADDR(DF_IO15, 0x0290),
+
+        MFP_ADDR(GSIM_UIO, 0x0314),
+        MFP_ADDR(GSIM_UCLK, 0x0318),
+        MFP_ADDR(GSIM_UDET, 0x031c),
+        MFP_ADDR(GSIM_nURST, 0x0320),
+
+        MFP_ADDR(PMIC_INT, 0x06c8),
+
+        MFP_ADDR(RDY, 0x0200),
+
+        MFP_ADDR_END,
+};
+
+static int __init pxa930_init(void)
+{
+        if (cpu_is_pxa930()) {
+                pxa3xx_init_mfp();
+                pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+        }
+
+        return 0;
+}
+
+core_initcall(pxa930_init);
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
new file mode 100644
index 000000000000..9d39dea57ce2
--- /dev/null
+++ b/arch/arm/mach-pxa/reset.c
@@ -0,0 +1,96 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <asm/io.h>
+#include <asm/proc-fns.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+
+static void do_hw_reset(void);
+
+static int reset_gpio = -1;
+
+int init_gpio_reset(int gpio)
+{
+        int rc;
+
+        rc = gpio_request(gpio, "reset generator");
+        if (rc) {
+                printk(KERN_ERR "Can't request reset_gpio\n");
+                goto out;
+        }
+
+        rc = gpio_direction_input(gpio);
+        if (rc) {
+                printk(KERN_ERR "Can't configure reset_gpio for input\n");
+                gpio_free(gpio);
+                goto out;
+        }
+
+out:
+        if (!rc)
+                reset_gpio = gpio;
+
+        return rc;
+}
+
+/*
+ * Trigger GPIO reset.
+ * This covers various types of logic connecting gpio pin
+ * to RESET pins (nRESET or GPIO_RESET):
+ */
+static void do_gpio_reset(void)
+{
+        BUG_ON(reset_gpio == -1);
+
+        /* drive it low */
+        gpio_direction_output(reset_gpio, 0);
+        mdelay(2);
+        /* rising edge or drive high */
+        gpio_set_value(reset_gpio, 1);
+        mdelay(2);
+        /* falling edge */
+        gpio_set_value(reset_gpio, 0);
+
+        /* give it some time */
+        mdelay(10);
+
+        WARN_ON(1);
+        /* fallback */
+        do_hw_reset();
+}
+
+static void do_hw_reset(void)
+{
+        /* Initialize the watchdog and let it fire */
+        OWER = OWER_WME;
+        OSSR = OSSR_M3;
+        OSMR3 = OSCR + 368640;  /* ... in 100 ms */
+}
+
+void arch_reset(char mode)
+{
+        if (cpu_is_pxa2xx())
+                RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+        switch (mode) {
+        case 's':
+                /* Jump into ROM at address 0 */
+                cpu_reset(0);
+                break;
+        case 'h':
+                do_hw_reset();
+                break;
+        case 'g':
+                do_gpio_reset();
+                break;
+        }
+}
+
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
new file mode 100644
index 000000000000..d02bc6f8bb93
--- /dev/null
+++ b/arch/arm/mach-pxa/saar.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/saar.c
+ *
+ *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* SAAR MFP configurations */
+static mfp_cfg_t saar_mfp_cfg[] __initdata = {
+        /* Ethernet */
+        DF_nCS1_nCS3,
+        GPIO97_GPIO,
+};
+
+#define SAAR_ETH_PHYS   (0x14000000)
+
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .start  = (SAAR_ETH_PHYS + 0x300),
+                .end    = (SAAR_ETH_PHYS + 0xfffff),
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+                .end    = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+        }
+};
+
+static struct smc91x_platdata saar_smc91x_info = {
+        .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &saar_smc91x_info,
+        },
+};
+
+static void __init saar_init(void)
+{
+        /* initialize MFP configurations */
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
+
+        platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
+        /* Maintainer: Eric Miao <eric.miao@marvell.com> */
+        .phys_io        = 0x40000000,
+        .boot_params    = 0xa0000100,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa3xx_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = saar_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index e7d0fcd9b43f..762249c03ded 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -38,6 +38,7 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/pxa27x-udc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
@@ -450,6 +451,7 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode)
                 set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
         else
                 reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
 #ifdef CONFIG_MACH_AKITA
@@ -459,6 +461,7 @@ static void akita_irda_transceiver_mode(struct device *dev, int mode)
                 akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
         else
                 akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+        pxa2xx_transceiver_mode(dev, mode);
 }
 #endif
 
@@ -529,11 +532,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void spitz_poweroff(void)
 {
-        pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
-        GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
-
-        mdelay(1000);
-        arm_machine_restart('h');
+        arm_machine_restart('g');
 }
 
 static void spitz_restart(char mode)
@@ -547,6 +546,7 @@ static void spitz_restart(char mode)
 
 static void __init common_init(void)
 {
+        init_gpio_reset(SPITZ_GPIO_ON_RESET);
         pm_power_off = spitz_poweroff;
         arm_pm_restart = spitz_restart;
 
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 23f050feb208..360354084ae4 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -26,6 +26,7 @@
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/spitz.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
@@ -207,7 +208,9 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
         .read_devdata     = spitzpm_read_devdata,
         .charger_wakeup   = spitz_charger_wakeup,
         .should_wakeup    = spitz_should_wakeup,
+#ifdef CONFIG_BACKLIGHT_CORGI
         .backlight_limit  = corgibl_limit_intensity,
+#endif
         .charge_on_volt   = SHARPSL_CHARGE_ON_VOLT,
         .charge_on_temp   = SHARPSL_CHARGE_ON_TEMP,
         .charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
@@ -229,6 +232,10 @@ static int __devinit spitzpm_init(void)
 {
         int ret;
 
+        if (!machine_is_spitz() && !machine_is_akita()
+                        && !machine_is_borzoi())
+                return -ENODEV;
+
         spitzpm_device = platform_device_alloc("sharpsl-pm", -1);
         if (!spitzpm_device)
                 return -ENOMEM;
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 0bb31982fb6f..89f38683787e 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -14,13 +14,6 @@
  *  IO-based SSP applications and allows easy port setup for DMA access.
  *
  *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- *
- *  Revision history:
- *   22nd Aug 2003 Initial version.
- *   20th Dec 2004 Added ssp_config for changing port config without
- *                 closing the port.
- *    4th Aug 2005 Added option to disable irq handler registration and
- *                 cleaned up irq and clock detection.
  */
 
 #include <linux/module.h>
@@ -285,7 +278,7 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
                         goto out_region;
                 dev->irq = ssp->irq;
         } else
-                dev->irq = 0;
+                dev->irq = NO_IRQ;
 
         /* turn on SSP port clock */
         clk_enable(ssp->clk);
@@ -306,7 +299,8 @@ void ssp_exit(struct ssp_dev *dev)
         struct ssp_device *ssp = dev->ssp;
 
         ssp_disable(dev);
-        free_irq(dev->irq, dev);
+        if (dev->irq != NO_IRQ)
+                free_irq(dev->irq, dev);
         clk_disable(ssp->clk);
         ssp_free(ssp);
 }
@@ -360,6 +354,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
                 dev_err(&pdev->dev, "failed to allocate memory");
                 return -ENOMEM;
         }
+        ssp->pdev = pdev;
 
         ssp->clk = clk_get(&pdev->dev, "SSPCLK");
         if (IS_ERR(ssp->clk)) {
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 167412e6bec8..40bb70eff3fe 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -14,6 +14,7 @@
 #include <asm/hardware.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 
                 .text
 
@@ -35,20 +36,20 @@ ENTRY(pxa_cpu_standby)
 
 #ifdef CONFIG_PXA3xx
 
-#define MDCNFG          0x0000
-#define MDCNFG_DMCEN    (1 << 30)
-#define DDR_HCAL        0x0060
-#define DDR_HCAL_HCRNG  0x1f
-#define DDR_HCAL_HCPROG (1 << 28)
-#define DDR_HCAL_HCEN   (1 << 31)
-#define DMCIER          0x0070
-#define DMCIER_EDLP     (1 << 29)
-#define DMCISR          0x0078
-#define RCOMP           0x0100
-#define RCOMP_SWEVAL    (1 << 31)
+#define PXA3_MDCNFG             0x0000
+#define PXA3_MDCNFG_DMCEN       (1 << 30)
+#define PXA3_DDR_HCAL           0x0060
+#define PXA3_DDR_HCAL_HCRNG     0x1f
+#define PXA3_DDR_HCAL_HCPROG    (1 << 28)
+#define PXA3_DDR_HCAL_HCEN      (1 << 31)
+#define PXA3_DMCIER             0x0070
+#define PXA3_DMCIER_EDLP        (1 << 29)
+#define PXA3_DMCISR             0x0078
+#define PXA3_RCOMP              0x0100
+#define PXA3_RCOMP_SWEVAL       (1 << 31)
 
 ENTRY(pm_enter_standby_start)
-        mov     r1, #0xf6000000         @ DMEMC_REG_BASE (MDCNFG)
+        mov     r1, #0xf6000000                 @ DMEMC_REG_BASE (PXA3_MDCNFG)
         add     r1, r1, #0x00100000
 
         /*
@@ -59,54 +60,54 @@ ENTRY(pm_enter_standby_start)
          * This also means that only the dynamic memory controller
          * can be reliably accessed in the code following standby.
          */
-        ldr     r2, [r1]                @ Dummy read MDCNFG
+        ldr     r2, [r1]                        @ Dummy read PXA3_MDCNFG
 
         mcr     p14, 0, r0, c7, c0, 0
         .rept   8
         nop
         .endr
 
-        ldr     r0, [r1, #DDR_HCAL]     @ Clear (and wait for) HCEN
-        bic     r0, r0, #DDR_HCAL_HCEN
-        str     r0, [r1, #DDR_HCAL]
-1:      ldr     r0, [r1, #DDR_HCAL]
-        tst     r0, #DDR_HCAL_HCEN
+        ldr     r0, [r1, #PXA3_DDR_HCAL]        @ Clear (and wait for) HCEN
+        bic     r0, r0, #PXA3_DDR_HCAL_HCEN
+        str     r0, [r1, #PXA3_DDR_HCAL]
+1:      ldr     r0, [r1, #PXA3_DDR_HCAL]
+        tst     r0, #PXA3_DDR_HCAL_HCEN
         bne     1b
 
-        ldr     r0, [r1, #RCOMP]        @ Initiate RCOMP
-        orr     r0, r0, #RCOMP_SWEVAL
-        str     r0, [r1, #RCOMP]
+        ldr     r0, [r1, #PXA3_RCOMP]           @ Initiate RCOMP
+        orr     r0, r0, #PXA3_RCOMP_SWEVAL
+        str     r0, [r1, #PXA3_RCOMP]
 
-        mov     r0, #~0                 @ Clear interrupts
-        str     r0, [r1, #DMCISR]
+        mov     r0, #~0                         @ Clear interrupts
+        str     r0, [r1, #PXA3_DMCISR]
 
-        ldr     r0, [r1, #DMCIER]       @ set DMIER[EDLP]
-        orr     r0, r0, #DMCIER_EDLP
-        str     r0, [r1, #DMCIER]
+        ldr     r0, [r1, #PXA3_DMCIER]          @ set DMIER[EDLP]
+        orr     r0, r0, #PXA3_DMCIER_EDLP
+        str     r0, [r1, #PXA3_DMCIER]
 
-        ldr     r0, [r1, #DDR_HCAL]     @ clear HCRNG, set HCPROG, HCEN
-        bic     r0, r0, #DDR_HCAL_HCRNG
-        orr     r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG
-        str     r0, [r1, #DDR_HCAL]
+        ldr     r0, [r1, #PXA3_DDR_HCAL]        @ clear HCRNG, set HCPROG, HCEN
+        bic     r0, r0, #PXA3_DDR_HCAL_HCRNG
+        orr     r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG
+        str     r0, [r1, #PXA3_DDR_HCAL]
 
-1:      ldr     r0, [r1, #DMCISR]
-        tst     r0, #DMCIER_EDLP
+1:      ldr     r0, [r1, #PXA3_DMCISR]
+        tst     r0, #PXA3_DMCIER_EDLP
         beq     1b
 
-        ldr     r0, [r1, #MDCNFG]       @ set MDCNFG[DMCEN]
-        orr     r0, r0, #MDCNFG_DMCEN
-        str     r0, [r1, #MDCNFG]
-1:      ldr     r0, [r1, #MDCNFG]
-        tst     r0, #MDCNFG_DMCEN
+        ldr     r0, [r1, #PXA3_MDCNFG]          @ set PXA3_MDCNFG[DMCEN]
+        orr     r0, r0, #PXA3_MDCNFG_DMCEN
+        str     r0, [r1, #PXA3_MDCNFG]
+1:      ldr     r0, [r1, #PXA3_MDCNFG]
+        tst     r0, #PXA3_MDCNFG_DMCEN
         beq     1b
 
-        ldr     r0, [r1, #DDR_HCAL]     @ set DDR_HCAL[HCRNG]
+        ldr     r0, [r1, #PXA3_DDR_HCAL]        @ set PXA3_DDR_HCAL[HCRNG]
         orr     r0, r0, #2 @ HCRNG
-        str     r0, [r1, #DDR_HCAL]
+        str     r0, [r1, #PXA3_DDR_HCAL]
 
-        ldr     r0, [r1, #DMCIER]       @ Clear the interrupt
+        ldr     r0, [r1, #PXA3_DMCIER]          @ Clear the interrupt
         bic     r0, r0, #0x20000000
-        str     r0, [r1, #DMCIER]
+        str     r0, [r1, #PXA3_DMCIER]
 
         mov     pc, lr
 ENTRY(pm_enter_standby_end)
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
new file mode 100644
index 000000000000..ac283507e423
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb.c
+ *
+ *  Support for the Marvell PXA930 Evaluation Board
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Tavor EVB MFP configurations */
+static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
+        /* Ethernet */
+        DF_nCS1_nCS3,
+        GPIO47_GPIO,
+};
+
+#define TAVOREVB_ETH_PHYS       (0x14000000)
+
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .start  = (TAVOREVB_ETH_PHYS + 0x300),
+                .end    = (TAVOREVB_ETH_PHYS + 0xfffff),
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+                .end    = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+        }
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+        .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &tavorevb_smc91x_info,
+        },
+};
+
+static void __init tavorevb_init(void)
+{
+        /* initialize MFP configurations */
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+
+        platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
+        /* Maintainer: Eric Miao <eric.miao@marvell.com> */
+        .phys_io        = 0x40000000,
+        .boot_params    = 0xa0000100,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa3xx_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = tavorevb_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
new file mode 100644
index 000000000000..7d8505466e54
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -0,0 +1,150 @@
+/*
+ * Bluetooth built-in chip control
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+#include <asm/arch/tosa_bt.h>
+
+static void tosa_bt_on(struct tosa_bt_data *data)
+{
+        gpio_set_value(data->gpio_reset, 0);
+        gpio_set_value(data->gpio_pwr, 1);
+        gpio_set_value(data->gpio_reset, 1);
+        mdelay(20);
+        gpio_set_value(data->gpio_reset, 0);
+}
+
+static void tosa_bt_off(struct tosa_bt_data *data)
+{
+        gpio_set_value(data->gpio_reset, 1);
+        mdelay(10);
+        gpio_set_value(data->gpio_pwr, 0);
+        gpio_set_value(data->gpio_reset, 0);
+}
+
+static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+{
+        pr_info("BT_RADIO going: %s\n",
+                        state == RFKILL_STATE_ON ? "on" : "off");
+
+        if (state == RFKILL_STATE_ON) {
+                pr_info("TOSA_BT: going ON\n");
+                tosa_bt_on(data);
+        } else {
+                pr_info("TOSA_BT: going OFF\n");
+                tosa_bt_off(data);
+        }
+        return 0;
+}
+
+static int tosa_bt_probe(struct platform_device *dev)
+{
+        int rc;
+        struct rfkill *rfk;
+
+        struct tosa_bt_data *data = dev->dev.platform_data;
+
+        rc = gpio_request(data->gpio_reset, "Bluetooth reset");
+        if (rc)
+                goto err_reset;
+        rc = gpio_direction_output(data->gpio_reset, 0);
+        if (rc)
+                goto err_reset_dir;
+        rc = gpio_request(data->gpio_pwr, "Bluetooth power");
+        if (rc)
+                goto err_pwr;
+        rc = gpio_direction_output(data->gpio_pwr, 0);
+        if (rc)
+                goto err_pwr_dir;
+
+        rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+        if (!rfk) {
+                rc = -ENOMEM;
+                goto err_rfk_alloc;
+        }
+
+        rfk->name = "tosa-bt";
+        rfk->toggle_radio = tosa_bt_toggle_radio;
+        rfk->data = data;
+#ifdef CONFIG_RFKILL_LEDS
+        rfk->led_trigger.name = "tosa-bt";
+#endif
+
+        rc = rfkill_register(rfk);
+        if (rc)
+                goto err_rfkill;
+
+        platform_set_drvdata(dev, rfk);
+
+        return 0;
+
+err_rfkill:
+        if (rfk)
+                rfkill_free(rfk);
+        rfk = NULL;
+err_rfk_alloc:
+        tosa_bt_off(data);
+err_pwr_dir:
+        gpio_free(data->gpio_pwr);
+err_pwr:
+err_reset_dir:
+        gpio_free(data->gpio_reset);
+err_reset:
+        return rc;
+}
+
+static int __devexit tosa_bt_remove(struct platform_device *dev)
+{
+        struct tosa_bt_data *data = dev->dev.platform_data;
+        struct rfkill *rfk = platform_get_drvdata(dev);
+
+        platform_set_drvdata(dev, NULL);
+
+        if (rfk)
+                rfkill_unregister(rfk);
+        rfk = NULL;
+
+        tosa_bt_off(data);
+
+        gpio_free(data->gpio_pwr);
+        gpio_free(data->gpio_reset);
+
+        return 0;
+}
+
+static struct platform_driver tosa_bt_driver = {
+        .probe = tosa_bt_probe,
+        .remove = __devexit_p(tosa_bt_remove),
+
+        .driver = {
+                .name = "tosa-bt",
+                .owner = THIS_MODULE,
+        },
+};
+
+
+static int __init tosa_bt_init(void)
+{
+        return platform_driver_register(&tosa_bt_driver);
+}
+
+static void __exit tosa_bt_exit(void)
+{
+        platform_driver_unregister(&tosa_bt_driver);
+}
+
+module_init(tosa_bt_init);
+module_exit(tosa_bt_exit);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ab4a9f579913..fea17ce6b55f 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -18,30 +18,31 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
 #include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <linux/pm.h>
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
+#include <linux/rfkill.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mfp-pxa25x.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/i2c.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
+#include <asm/arch/tosa_bt.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/arch/tosa.h>
 
 #include <asm/hardware/scoop.h>
@@ -86,7 +87,7 @@ static unsigned long tosa_pin_config[] = {
         GPIO6_MMC_CLK,
         GPIO8_MMC_CS0,
         GPIO9_GPIO, /* Detect */
-        // GPIO10 nSD_INT
+        GPIO10_GPIO, /* nSD_INT */
 
         /* CF */
         GPIO13_GPIO, /* CD_IRQ */
@@ -124,34 +125,34 @@ static unsigned long tosa_pin_config[] = {
         GPIO44_BTUART_CTS,
         GPIO45_BTUART_RTS,
 
-        /* IrDA */
-        GPIO46_STUART_RXD,
-        GPIO47_STUART_TXD,
-
         /* Keybd */
-        GPIO58_GPIO,
-        GPIO59_GPIO,
-        GPIO60_GPIO,
-        GPIO61_GPIO,
-        GPIO62_GPIO,
-        GPIO63_GPIO,
-        GPIO64_GPIO,
-        GPIO65_GPIO,
-        GPIO66_GPIO,
-        GPIO67_GPIO,
-        GPIO68_GPIO,
-        GPIO69_GPIO,
-        GPIO70_GPIO,
-        GPIO71_GPIO,
-        GPIO72_GPIO,
-        GPIO73_GPIO,
-        GPIO74_GPIO,
-        GPIO75_GPIO,
+        GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
 
         /* SPI */
         GPIO81_SSP2_CLK_OUT,
         GPIO82_SSP2_FRM_OUT,
         GPIO83_SSP2_TXD,
+
+        /* IrDA is managed in other way */
+        GPIO46_GPIO,
+        GPIO47_GPIO,
 };
 
 /*
@@ -249,6 +250,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 
         tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
+        err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
+        if (err) {
+                printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
+                goto err_gpio_detect;
+        }
+        err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
+        if (err)
+                goto err_gpio_detect_dir;
+
         err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
                           IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
                                 "MMC/SD card detect", data);
@@ -257,7 +267,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
                 goto err_irq;
         }
 
-        err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp");
+        err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
         if (err) {
                 printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
                 goto err_gpio_wp;
@@ -266,7 +276,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
         if (err)
                 goto err_gpio_wp_dir;
 
-        err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr");
+        err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
         if (err) {
                 printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
                 goto err_gpio_pwr;
@@ -275,8 +285,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
         if (err)
                 goto err_gpio_pwr_dir;
 
+        err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
+        if (err) {
+                printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+                goto err_gpio_int;
+        }
+        err = gpio_direction_input(TOSA_GPIO_nSD_INT);
+        if (err)
+                goto err_gpio_int_dir;
+
         return 0;
 
+err_gpio_int_dir:
+        gpio_free(TOSA_GPIO_nSD_INT);
+err_gpio_int:
 err_gpio_pwr_dir:
         gpio_free(TOSA_GPIO_PWR_ON);
 err_gpio_pwr:
@@ -285,6 +307,9 @@ err_gpio_wp_dir:
 err_gpio_wp:
         free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
 err_irq:
+err_gpio_detect_dir:
+        gpio_free(TOSA_GPIO_nSD_DETECT);
+err_gpio_detect:
         return err;
 }
 
@@ -306,9 +331,11 @@ static int tosa_mci_get_ro(struct device *dev)
 
 static void tosa_mci_exit(struct device *dev, void *data)
 {
+        gpio_free(TOSA_GPIO_nSD_INT);
         gpio_free(TOSA_GPIO_PWR_ON);
         gpio_free(TOSA_GPIO_SD_WP);
         free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+        gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
@@ -322,29 +349,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = {
 /*
  * Irda
  */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+        if (mode & IR_OFF) {
+                gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
+                pxa2xx_transceiver_mode(dev, mode);
+                gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+        } else {
+                pxa2xx_transceiver_mode(dev, mode);
+                gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
+        }
+}
+
 static int tosa_irda_startup(struct device *dev)
 {
         int ret;
 
+        ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
+        if (ret)
+                goto err_tx;
+        ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+        if (ret)
+                goto err_tx_dir;
+
         ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
         if (ret)
-                return ret;
+                goto err_pwr;
 
         ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
         if (ret)
-                gpio_free(TOSA_GPIO_IR_POWERDWN);
+                goto err_pwr_dir;
 
-        return ret;
-        }
+        tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
 
-static void tosa_irda_shutdown(struct device *dev)
-{
+        return 0;
+
+err_pwr_dir:
         gpio_free(TOSA_GPIO_IR_POWERDWN);
+err_pwr:
+err_tx_dir:
+        gpio_free(TOSA_GPIO_IRDA_TX);
+err_tx:
+        return ret;
 }
 
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+static void tosa_irda_shutdown(struct device *dev)
 {
-        gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF));
+        tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+        gpio_free(TOSA_GPIO_IR_POWERDWN);
+        gpio_free(TOSA_GPIO_IRDA_TX);
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
@@ -355,6 +408,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 };
 
 /*
+ * Tosa AC IN
+ */
+static int tosa_power_init(struct device *dev)
+{
+        int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
+        if (ret)
+                goto err_gpio_req;
+
+        ret = gpio_direction_input(TOSA_GPIO_AC_IN);
+        if (ret)
+                goto err_gpio_in;
+
+        return 0;
+
+err_gpio_in:
+        gpio_free(TOSA_GPIO_AC_IN);
+err_gpio_req:
+        return ret;
+}
+
+static void tosa_power_exit(struct device *dev)
+{
+        gpio_free(TOSA_GPIO_AC_IN);
+}
+
+static int tosa_power_ac_online(void)
+{
+        return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
+}
+
+static char *tosa_ac_supplied_to[] = {
+        "main-battery",
+        "backup-battery",
+        "jacket-battery",
+};
+
+static struct pda_power_pdata tosa_power_data = {
+        .init                   = tosa_power_init,
+        .is_ac_online           = tosa_power_ac_online,
+        .exit                   = tosa_power_exit,
+        .supplied_to            = tosa_ac_supplied_to,
+        .num_supplicants        = ARRAY_SIZE(tosa_ac_supplied_to),
+};
+
+static struct resource tosa_power_resource[] = {
+        {
+                .name           = "ac",
+                .start          = gpio_to_irq(TOSA_GPIO_AC_IN),
+                .end            = gpio_to_irq(TOSA_GPIO_AC_IN),
+                .flags          = IORESOURCE_IRQ |
+                                  IORESOURCE_IRQ_HIGHEDGE |
+                                  IORESOURCE_IRQ_LOWEDGE,
+        },
+};
+
+static struct platform_device tosa_power_device = {
+        .name                   = "pda-power",
+        .id                     = -1,
+        .dev.platform_data      = &tosa_power_data,
+        .resource               = tosa_power_resource,
+        .num_resources          = ARRAY_SIZE(tosa_power_resource),
+};
+
+/*
  * Tosa Keyboard
  */
 static struct platform_device tosakbd_device = {
@@ -439,7 +556,7 @@ static struct gpio_led tosa_gpio_leds[] = {
         },
         {
                 .name                   = "tosa:blue:bluetooth",
-                .default_trigger        = "none",
+                .default_trigger        = "tosa-bt",
                 .gpio                   = TOSA_GPIO_BT_LED,
         },
 };
@@ -457,21 +574,184 @@ static struct platform_device tosaled_device = {
         },
 };
 
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+        [0] = {
+                .start  = TOSA_LCDC_PHYS,
+                .end    = TOSA_LCDC_PHYS + 0x3ffffff,
+                .flags  = IORESOURCE_MEM,
+        },
+
+        [1] = {
+                .start  = TOSA_IRQ_GPIO_TC6393XB_INT,
+                .end    = TOSA_IRQ_GPIO_TC6393XB_INT,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+        int rc;
+
+        rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+        if (rc)
+                goto err_req_pclr;
+        rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+        if (rc)
+                goto err_req_suspend;
+        rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+        if (rc)
+                goto err_req_l3v;
+        rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+        if (rc)
+                goto err_dir_l3v;
+        rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+        if (rc)
+                goto err_dir_suspend;
+        rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+        if (rc)
+                goto err_dir_pclr;
+
+        mdelay(1);
+
+        gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+        mdelay(10);
+
+        gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+        gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+        return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+        gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+        gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+        gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+        return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+        gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+        gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+        gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+        return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+        gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+        mdelay(10);
+        gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+        mdelay(10);
+
+        return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+        gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+        gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+        return 0;
+}
+
+static struct mtd_partition tosa_nand_partition[] = {
+        {
+                .name   = "smf",
+                .offset = 0,
+                .size   = 7 * 1024 * 1024,
+        },
+        {
+                .name   = "root",
+                .offset = MTDPART_OFS_APPEND,
+                .size   = 28 * 1024 * 1024,
+        },
+        {
+                .name   = "home",
+                .offset = MTDPART_OFS_APPEND,
+                .size   = MTDPART_SIZ_FULL,
+        },
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
+        .options        = 0,
+        .offs           = 4,
+        .len            = 2,
+        .pattern        = scan_ff_pattern
+};
+
+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
+        .num_partitions = ARRAY_SIZE(tosa_nand_partition),
+        .partition      = tosa_nand_partition,
+        .badblock_pattern = &tosa_tc6393xb_nand_bbt,
+};
+
+static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+        .scr_pll2cr     = 0x0cc1,
+        .scr_gper       = 0x3300,
+        .scr_gpo_dsr    =
+                TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+        .scr_gpo_doecr  =
+                TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+
+        .irq_base       = IRQ_BOARD_START,
+        .gpio_base      = TOSA_TC6393XB_GPIO_BASE,
+
+        .enable         = tosa_tc6393xb_enable,
+        .disable        = tosa_tc6393xb_disable,
+        .suspend        = tosa_tc6393xb_suspend,
+        .resume         = tosa_tc6393xb_resume,
+
+        .nand_data      = &tosa_tc6393xb_nand_config,
+};
+
+
+static struct platform_device tc6393xb_device = {
+        .name   = "tc6393xb",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &tosa_tc6393xb_setup,
+        },
+        .num_resources  = ARRAY_SIZE(tc6393xb_resources),
+        .resource       = tc6393xb_resources,
+};
+
+static struct tosa_bt_data tosa_bt_data = {
+        .gpio_pwr       = TOSA_GPIO_BT_PWR_EN,
+        .gpio_reset     = TOSA_GPIO_BT_RESET,
+};
+
+static struct platform_device tosa_bt_device = {
+        .name   = "tosa-bt",
+        .id     = -1,
+        .dev.platform_data = &tosa_bt_data,
+};
+
+
 static struct platform_device *devices[] __initdata = {
         &tosascoop_device,
         &tosascoop_jc_device,
+        &tc6393xb_device,
+        &tosa_power_device,
         &tosakbd_device,
         &tosa_gpio_keys_device,
         &tosaled_device,
+        &tosa_bt_device,
 };
 
 static void tosa_poweroff(void)
 {
-        gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
-        gpio_set_value(TOSA_GPIO_ON_RESET, 1);
-
-        mdelay(1000);
-        arm_machine_restart('h');
+        arm_machine_restart('g');
 }
 
 static void tosa_restart(char mode)
@@ -485,10 +765,14 @@ static void tosa_restart(char mode)
 
 static void __init tosa_init(void)
 {
+        int dummy;
+
         pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
         gpio_set_wake(MFP_PIN_GPIO1, 1);
         /* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
+        init_gpio_reset(TOSA_GPIO_ON_RESET);
+
         pm_power_off = tosa_poweroff;
         arm_pm_restart = tosa_restart;
 
@@ -497,6 +781,10 @@ static void __init tosa_init(void)
         /* enable batt_fault */
         PMCR = 0x01;
 
+        dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
+        dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
+        dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+
         pxa_set_mci_info(&tosa_mci_platform_data);
         pxa_set_udc_info(&udc_info);
         pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 931885d86b91..dee7bf36f013 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -41,6 +41,7 @@
 #include <asm/mach/flash.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/trizeps4.h>
 #include <asm/arch/audio.h>
@@ -175,19 +176,10 @@ static struct platform_device uart_devices = {
         .resource       = NULL,
 };
 
-/********************************************************************************************
- * PXA270 ac97 sound codec
- ********************************************************************************************/
-static struct platform_device ac97_audio_device = {
-        .name           = "pxa2xx-ac97",
-        .id             = -1,
-};
-
 static struct platform_device * trizeps4_devices[] __initdata = {
         &flash_device,
         &uart_devices,
         &dm9000_device,
-        &ac97_audio_device,
 };
 
 #ifdef CONFIG_MACH_TRIZEPS4_CONXS
@@ -262,6 +254,7 @@ static void board_irda_mode(struct device *dev, int mode)
                 /* Fast mode */
                 trizeps_conxs_ircr |= ConXS_IRCR_MODE;
         }
+        pxa2xx_transceiver_mode(dev, mode);
         if (mode & IR_OFF) {
                 trizeps_conxs_ircr |= ConXS_IRCR_SD;
         } else {
@@ -438,6 +431,7 @@ static void __init trizeps4_init(void)
         pxa_set_mci_info(&trizeps4_mci_platform_data);
         pxa_set_ficp_info(&trizeps4_ficp_platform_data);
         pxa_set_ohci_info(&trizeps4_ohci_platform_data);
+        pxa_set_ac97_info(NULL);
 }
 
 static void __init trizeps4_map_io(void)
@@ -487,6 +481,7 @@ static void __init trizeps4_map_io(void)
         ConXS_BCR = trizeps_conxs_bcr;
 #endif
 
+#warning FIXME - accessing PM registers directly is deprecated
         PWER  = 0x00000002;
         PFER  = 0x00000000;
         PRER  = 0x00000002;
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 4a0028087ea6..8fca6d890b7d 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -18,23 +18,29 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware.h>
+#include <asm/arch/audio.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/zylonite.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
 
+#include "devices.h"
 #include "generic.h"
 
 #define MAX_SLOTS       3
 struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
 
-int gpio_backlight;
 int gpio_eth_irq;
+int gpio_debug_led1;
+int gpio_debug_led2;
 
 int wm9713_irq;
 
@@ -54,18 +60,72 @@ static struct resource smc91x_resources[] = {
         }
 };
 
+static struct smc91x_platdata zylonite_smc91x_info = {
+        .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+                  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = 0,
         .num_resources  = ARRAY_SIZE(smc91x_resources),
         .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &zylonite_smc91x_info,
+        },
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static void zylonite_backlight_power(int on)
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led zylonite_debug_leds[] = {
+        [0] = {
+                .name                   = "zylonite:yellow:1",
+                .default_trigger        = "heartbeat",
+        },
+        [1] = {
+                .name                   = "zylonite:yellow:2",
+                .default_trigger        = "default-on",
+        },
+};
+
+static struct gpio_led_platform_data zylonite_debug_leds_info = {
+        .leds           = zylonite_debug_leds,
+        .num_leds       = ARRAY_SIZE(zylonite_debug_leds),
+};
+
+static struct platform_device zylonite_device_leds = {
+        .name           = "leds-gpio",
+        .id             = -1,
+        .dev            = {
+                .platform_data = &zylonite_debug_leds_info,
+        }
+};
+
+static void __init zylonite_init_leds(void)
 {
-        gpio_set_value(gpio_backlight, on);
+        zylonite_debug_leds[0].gpio = gpio_debug_led1;
+        zylonite_debug_leds[1].gpio = gpio_debug_led2;
+
+        platform_device_register(&zylonite_device_leds);
 }
+#else
+static inline void zylonite_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data zylonite_backlight_data = {
+        .pwm_id         = 3,
+        .max_brightness = 100,
+        .dft_brightness = 100,
+        .pwm_period_ns  = 10000,
+};
+
+static struct platform_device zylonite_backlight_device = {
+        .name           = "pwm-backlight",
+        .dev            = {
+                .parent = &pxa27x_device_pwm1.dev,
+                .platform_data  = &zylonite_backlight_data,
+        },
+};
 
 static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
         .pixclock               = 110000,
@@ -98,7 +158,6 @@ static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
 static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
         .num_modes              = 1,
         .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-        .pxafb_backlight_power  = zylonite_backlight_power,
 };
 
 static struct pxafb_mode_info sharp_ls037_modes[] = {
@@ -134,13 +193,11 @@ static struct pxafb_mach_info zylonite_sharp_lcd_info = {
         .modes                  = sharp_ls037_modes,
         .num_modes              = 2,
         .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-        .pxafb_backlight_power  = zylonite_backlight_power,
 };
 
 static void __init zylonite_init_lcd(void)
 {
-        /* backlight GPIO: output, default on */
-        gpio_direction_output(gpio_backlight, 1);
+        platform_device_register(&zylonite_backlight_device);
 
         if (lcd_id & 0x20) {
                 set_pxa_fb_info(&zylonite_sharp_lcd_info);
@@ -250,7 +307,7 @@ static void __init zylonite_init_mmc(void)
 static inline void zylonite_init_mmc(void) {}
 #endif
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int zylonite_matrix_key_map[] = {
         /* KEY(row, col, key_code) */
         KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
@@ -315,6 +372,57 @@ static void __init zylonite_init_keypad(void)
 static inline void zylonite_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition zylonite_nand_partitions[] = {
+        [0] = {
+                .name        = "Bootloader",
+                .offset      = 0,
+                .size        = 0x060000,
+                .mask_flags  = MTD_WRITEABLE, /* force read-only */
+        },
+        [1] = {
+                .name        = "Kernel",
+                .offset      = 0x060000,
+                .size        = 0x200000,
+                .mask_flags  = MTD_WRITEABLE, /* force read-only */
+        },
+        [2] = {
+                .name        = "Filesystem",
+                .offset      = 0x0260000,
+                .size        = 0x3000000,     /* 48M - rootfs */
+        },
+        [3] = {
+                .name        = "MassStorage",
+                .offset      = 0x3260000,
+                .size        = 0x3d40000,
+        },
+        [4] = {
+                .name        = "BBT",
+                .offset      = 0x6FA0000,
+                .size        = 0x80000,
+                .mask_flags  = MTD_WRITEABLE,  /* force read-only */
+        },
+        /* NOTE: we reserve some blocks at the end of the NAND flash for
+         * bad block management, and the max number of relocation blocks
+         * differs on different platforms. Please take care with it when
+         * defining the partition table.
+         */
+};
+
+static struct pxa3xx_nand_platform_data zylonite_nand_info = {
+        .enable_arbiter = 1,
+        .parts          = zylonite_nand_partitions,
+        .nr_parts       = ARRAY_SIZE(zylonite_nand_partitions),
+};
+
+static void __init zylonite_init_nand(void)
+{
+        pxa3xx_set_nand_info(&zylonite_nand_info);
+}
+#else
+static inline void zylonite_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init zylonite_init(void)
 {
         /* board-processor specific initialization */
@@ -329,9 +437,12 @@ static void __init zylonite_init(void)
         smc91x_resources[1].end   = gpio_to_irq(gpio_eth_irq);
         platform_device_register(&smc91x_device);
 
+        pxa_set_ac97_info(NULL);
         zylonite_init_lcd();
         zylonite_init_mmc();
         zylonite_init_keypad();
+        zylonite_init_nand();
+        zylonite_init_leds();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 324fb9daae28..b28d46e081d3 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -16,9 +16,12 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
 
 #include <asm/gpio.h>
 #include <asm/arch/mfp-pxa300.h>
+#include <asm/arch/i2c.h>
 #include <asm/arch/zylonite.h>
 
 #include "generic.h"
@@ -50,6 +53,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
         GPIO75_LCD_BIAS,
         GPIO76_LCD_VSYNC,
         GPIO127_LCD_CS_N,
+        GPIO20_PWM3_OUT,        /* backlight */
 
         /* BTUART */
         GPIO111_UART2_RTS,
@@ -108,6 +112,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
         GPIO12_MMC2_DAT3,
         GPIO13_MMC2_CLK,
         GPIO14_MMC2_CMD,
+
+        /* Standard I2C */
+        GPIO21_I2C_SCL,
+        GPIO22_I2C_SDA,
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -191,6 +199,39 @@ static void __init zylonite_detect_lcd_panel(void)
                 pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
 }
 
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static struct pca953x_platform_data gpio_exp[] = {
+        [0] = {
+                .gpio_base      = 128,
+        },
+        [1] = {
+                .gpio_base      = 144,
+        },
+};
+
+struct i2c_board_info zylonite_i2c_board_info[] = {
+        {
+                .type           = "pca9539",
+                .addr           = 0x74,
+                .platform_data  = &gpio_exp[0],
+                .irq            = IRQ_GPIO(18),
+        }, {
+                .type           = "pca9539",
+                .addr           = 0x75,
+                .platform_data  = &gpio_exp[1],
+                .irq            = IRQ_GPIO(19),
+        },
+};
+
+static void __init zylonite_init_i2c(void)
+{
+        pxa_set_i2c_info(NULL);
+        i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
+}
+#else
+static inline void zylonite_init_i2c(void) {}
+#endif
+
 void __init zylonite_pxa300_init(void)
 {
         if (cpu_is_pxa300() || cpu_is_pxa310()) {
@@ -200,15 +241,14 @@ void __init zylonite_pxa300_init(void)
                 /* detect LCD panel */
                 zylonite_detect_lcd_panel();
 
-                /* GPIO pin assignment */
-                gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
-
                 /* MMC card detect & write protect for controller 0 */
                 zylonite_mmc_slot[0].gpio_cd  = EXT_GPIO(0);
                 zylonite_mmc_slot[0].gpio_wp  = EXT_GPIO(2);
 
                 /* WM9713 IRQ */
                 wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+                zylonite_init_i2c();
         }
 
         if (cpu_is_pxa300()) {
@@ -224,4 +264,8 @@ void __init zylonite_pxa300_init(void)
                 zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
                 zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
         }
+
+        /* GPIOs for Debug LEDs */
+        gpio_debug_led1 = EXT_GPIO(25);
+        gpio_debug_led2 = EXT_GPIO(26);
 }
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 193d07903b06..2b7fba7a2921 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -49,6 +49,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
         GPIO15_2_LCD_LCLK,
         GPIO16_2_LCD_PCLK,
         GPIO17_2_LCD_BIAS,
+        GPIO14_PWM3_OUT,        /* backlight */
 
         /* FFUART */
         GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
@@ -115,6 +116,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
         GPIO27_MMC2_DAT3,
         GPIO28_MMC2_CLK,
         GPIO29_MMC2_CMD,
+
+        /* Debug LEDs */
+        GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
+        GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
 };
 
 #define NUM_LCD_DETECT_PINS     7
@@ -187,8 +192,9 @@ void __init zylonite_pxa320_init(void)
                 zylonite_detect_lcd_panel();
 
                 /* GPIO pin assignment */
-                gpio_backlight  = mfp_to_gpio(MFP_PIN_GPIO14);
                 gpio_eth_irq    = mfp_to_gpio(MFP_PIN_GPIO9);
+                gpio_debug_led1 = mfp_to_gpio(MFP_PIN_GPIO1_2);
+                gpio_debug_led2 = mfp_to_gpio(MFP_PIN_GPIO4_2);
 
                 /* MMC card detect & write protect for controller 0 */
                 zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index cd3dc0834b3b..99fdc736698c 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -37,6 +37,17 @@ config S3C2410_CLOCK
         help
           Clock code for the S3C2410, and similar processors
 
+config SIMTEC_NOR
+        bool
+        help
+          Internal node to specify machine has simtec NOR mapping
+
+config MACH_BAST_IDE
+        bool
+        select HAVE_PATA_PLATFORM
+        help
+          Internal node for machines with an BAST style IDE
+          interface
 
 menu "S3C2410 Machines"
 
@@ -61,15 +72,18 @@ config PM_H1940
           Internal node for H1940 and related PM
 
 config MACH_N30
-        bool "Acer N30"
+        bool "Acer N30 family"
         select CPU_S3C2410
         help
-          Say Y here if you are using the Acer N30
+          Say Y here if you want suppt for the Acer N30, Acer N35,
+          Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
 
 config ARCH_BAST
         bool "Simtec Electronics BAST (EB2410ITX)"
         select CPU_S3C2410
         select PM_SIMTEC if PM
+        select SIMTEC_NOR
+        select MACH_BAST_IDE
         select ISA
         help
           Say Y here if you are using the Simtec Electronics EB2410ITX
@@ -107,6 +121,8 @@ config MACH_TCT_HAMMER
 config MACH_VR1000
         bool "Thorcom VR1000"
         select PM_SIMTEC if PM
+        select SIMTEC_NOR
+        select MACH_BAST_IDE
         select CPU_S3C2410
         help
           Say Y here if you are using the Thorcom VR1000 board.
@@ -118,4 +134,3 @@ config MACH_QT2410
            Say Y here if you are using the Armzone QT2410
 
 endmenu
-
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index cabc13ce09e4..00f31f8c4e78 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -30,3 +30,11 @@ obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
 obj-$(CONFIG_MACH_TCT_HAMMER)   += mach-tct_hammer.o
 obj-$(CONFIG_MACH_VR1000)       += mach-vr1000.o usb-simtec.o
 obj-$(CONFIG_MACH_QT2410)       += mach-qt2410.o
+
+# Common bits of machine support
+
+obj-$(CONFIG_SIMTEC_NOR)        += nor-simtec.o
+
+# machine additions
+
+obj-$(CONFIG_MACH_BAST_IDE)     += bast-ide.o
diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c2410/bast-ide.c
new file mode 100644
index 000000000000..df95fe37cdc8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/bast-ide.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/mach-s3c2410/bast-ide.c
+ *
+ * Copyright 2007 Simtec Electronics
+ *      http://www.simtec.co.uk/products/EB2410ITX/
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/bast-map.h>
+#include <asm/arch/bast-irq.h>
+
+/* IDE ports */
+
+static struct pata_platform_info bast_ide_platdata = {
+        .ioport_shift   = 5,
+};
+
+#define IDE_CS  S3C2410_CS5
+
+static struct resource bast_ide0_resource[] = {
+        [0]     = {
+                .start  = IDE_CS + BAST_PA_IDEPRI,
+                .end    = IDE_CS + BAST_PA_IDEPRI + (8 * 0x20) - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1]     = {
+                .start  = IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20) ,
+                .end    = IDE_CS + BAST_PA_IDEPRIAUX + (7 * 0x20) - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [2]     = {
+                .start  = IRQ_IDE0,
+                .end    = IRQ_IDE0,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bast_device_ide0 = {
+        .name           = "pata_platform",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(bast_ide0_resource),
+        .resource       = bast_ide0_resource,
+        .dev            = {
+                .platform_data = &bast_ide_platdata,
+                .coherent_dma_mask = ~0,
+        }
+
+};
+
+static struct resource bast_ide1_resource[] = {
+        [0]     = {
+                .start  = IDE_CS + BAST_PA_IDESEC,
+                .end    = IDE_CS + BAST_PA_IDESEC + (8 * 0x20) - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1]     = {
+                .start  = IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20),
+                .end    = IDE_CS + BAST_PA_IDESECAUX + (7 * 0x20) - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [2]     = {
+                .start  = IRQ_IDE1,
+                .end    = IRQ_IDE1,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bast_device_ide1 = {
+        .name           = "pata_platform",
+        .id             = 1,
+        .num_resources  = ARRAY_SIZE(bast_ide1_resource),
+        .resource       = bast_ide1_resource,
+        .dev            = {
+                .platform_data = &bast_ide_platdata,
+                .coherent_dma_mask = ~0,
+        }
+};
+
+static struct platform_device *bast_ide_devices[] __initdata = {
+        &bast_device_ide0,
+        &bast_device_ide1,
+};
+
+static __init int bast_ide_init(void)
+{
+        if (machine_is_bast() || machine_is_vr1000())
+                return platform_add_devices(bast_ide_devices,
+                                            ARRAY_SIZE(bast_ide_devices));
+
+        return 0;
+}
+
+fs_initcall(bast_ide_init);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 27f63d5d3a7b..965f27129707 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-bast.c
  *
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2005,2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -20,6 +20,8 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/dm9000.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
 
 #include <net/ax88796.h>
 
@@ -56,7 +58,9 @@
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
+
 #include "usb-simtec.h"
+#include "nor-simtec.h"
 
 #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
 
@@ -134,37 +138,21 @@ static struct map_desc bast_iodesc[] __initdata = {
   { VA_C2(BAST_VA_ISAIO),   PA_CS2(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C2(BAST_VA_ISAMEM),  PA_CS2(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
   { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-  { VA_C2(BAST_VA_IDEPRI),  PA_CS3(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
-  { VA_C2(BAST_VA_IDESEC),  PA_CS3(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
-  { VA_C2(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C2(BAST_VA_IDESECAUX), PA_CS3(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
 
   /* slow, word */
   { VA_C3(BAST_VA_ISAIO),   PA_CS3(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C3(BAST_VA_ISAMEM),  PA_CS3(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
   { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-  { VA_C3(BAST_VA_IDEPRI),  PA_CS3(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
-  { VA_C3(BAST_VA_IDESEC),  PA_CS3(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
-  { VA_C3(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C3(BAST_VA_IDESECAUX), PA_CS3(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
 
   /* fast, byte */
   { VA_C4(BAST_VA_ISAIO),   PA_CS4(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C4(BAST_VA_ISAMEM),  PA_CS4(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
   { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-  { VA_C4(BAST_VA_IDEPRI),  PA_CS5(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
-  { VA_C4(BAST_VA_IDESEC),  PA_CS5(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
-  { VA_C4(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C4(BAST_VA_IDESECAUX), PA_CS5(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
 
   /* fast, word */
   { VA_C5(BAST_VA_ISAIO),   PA_CS5(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C5(BAST_VA_ISAMEM),  PA_CS5(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
   { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-  { VA_C5(BAST_VA_IDEPRI),  PA_CS5(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
-  { VA_C5(BAST_VA_IDESEC),  PA_CS5(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
-  { VA_C5(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C5(BAST_VA_IDESECAUX), PA_CS5(BAST_PA_IDESECAUX), SZ_1M, MT_DEVICE },
 };
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
@@ -218,23 +206,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
         }
 };
 
-/* NOR Flash on BAST board */
-
-static struct resource bast_nor_resource[] = {
-        [0] = {
-                .start = S3C2410_CS1 + 0x4000000,
-                .end   = S3C2410_CS1 + 0x4000000 + (32*1024*1024) - 1,
-                .flags = IORESOURCE_MEM,
-        }
-};
-
-static struct platform_device bast_device_nor = {
-        .name           = "bast-nor",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(bast_nor_resource),
-        .resource       = bast_nor_resource,
-};
-
 /* NAND Flash on BAST board */
 
 #ifdef CONFIG_PM
@@ -374,7 +345,7 @@ static struct resource bast_dm9k_resource[] = {
         [2] = {
                 .start = IRQ_DM9000,
                 .end   = IRQ_DM9000,
-                .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
         }
 
 };
@@ -564,6 +535,18 @@ static struct s3c2410fb_mach_info __initdata bast_fb_info = {
         .default_display = 1,
 };
 
+/* I2C devices fitted. */
+
+static struct i2c_board_info bast_i2c_devs[] __initdata = {
+        {
+                I2C_BOARD_INFO("tlv320aic23", 0x1a),
+        }, {
+                I2C_BOARD_INFO("simtec-pmu", 0x6b),
+        }, {
+                I2C_BOARD_INFO("ch7013", 0x75),
+        },
+};
+
 /* Standard BAST devices */
 
 static struct platform_device *bast_devices[] __initdata = {
@@ -573,7 +556,6 @@ static struct platform_device *bast_devices[] __initdata = {
         &s3c_device_i2c,
         &s3c_device_rtc,
         &s3c_device_nand,
-        &bast_device_nor,
         &bast_device_dm9k,
         &bast_device_asix,
         &bast_device_axpp,
@@ -622,6 +604,11 @@ static void __init bast_init(void)
 
         s3c24xx_fb_set_platdata(&bast_fb_info);
         platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
+
+        i2c_register_board_info(0, bast_i2c_devs,
+                                ARRAY_SIZE(bast_i2c_devs));
+
+        nor_simtec_init();
 }
 
 MACHINE_START(BAST, "Simtec-BAST")
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 621f548da610..43c2e915c5bf 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -1,9 +1,10 @@
-/* linux/arch/arm/mach-s3c2410/mach-n30.c
+/* Machine specific code for the Acer n30, Acer N35, Navman PiN 570,
+ * Yakumo AlphaX and Airis NC05 PDAs.
  *
  * Copyright (c) 2003-2005 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *
- * Copyright (c) 2005 Christer Weinigel <christer@weinigel.se>
+ * Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se>
  *
  * There is a wiki with more information about the n30 port at
  * http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
@@ -11,36 +12,42 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
+
 #include <linux/delay.h>
-#include <linux/serial_core.h>
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/kthread.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <linux/serial_core.h>
+#include <linux/timer.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/fb.h>
+#include <asm/arch/leds-gpio.h>
 #include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
 #include <asm/plat-s3c/iic.h>
+#include <asm/plat-s3c/regs-serial.h>
 
-#include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/udc.h>
 
 static struct map_desc n30_iodesc[] __initdata = {
         /* nothing here yet */
@@ -64,7 +71,8 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = {
                 .ulcon       = 0x43,
                 .ufcon       = 0x51,
         },
-        /* The BlueTooth controller is connected to port 2 */
+        /* On the N30 the bluetooth controller is connected here.
+         * On the N35 and variants the GPS receiver is connected here. */
         [2] = {
                 .hwport      = 2,
                 .flags       = 0,
@@ -74,13 +82,260 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = {
         },
 };
 
+static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+        switch (cmd) {
+        case S3C2410_UDC_P_ENABLE :
+                s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+                break;
+        case S3C2410_UDC_P_DISABLE :
+                s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+                break;
+        case S3C2410_UDC_P_RESET :
+                break;
+        default:
+                break;
+        }
+}
+
+static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
+        .udc_command            = n30_udc_pullup,
+        .vbus_pin               = S3C2410_GPG1,
+        .vbus_pin_inverted      = 0,
+};
+
+static struct gpio_keys_button n30_buttons[] = {
+        {
+                .gpio           = S3C2410_GPF0,
+                .code           = KEY_POWER,
+                .desc           = "Power",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPG9,
+                .code           = KEY_UP,
+                .desc           = "Thumbwheel Up",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPG8,
+                .code           = KEY_DOWN,
+                .desc           = "Thumbwheel Down",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPG7,
+                .code           = KEY_ENTER,
+                .desc           = "Thumbwheel Press",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPF7,
+                .code           = KEY_HOMEPAGE,
+                .desc           = "Home",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPF6,
+                .code           = KEY_CALENDAR,
+                .desc           = "Calendar",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPF5,
+                .code           = KEY_ADDRESSBOOK,
+                .desc           = "Contacts",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPF4,
+                .code           = KEY_MAIL,
+                .desc           = "Mail",
+                .active_low     = 0,
+        },
+};
+
+static struct gpio_keys_platform_data n30_button_data = {
+        .buttons        = n30_buttons,
+        .nbuttons       = ARRAY_SIZE(n30_buttons),
+};
+
+static struct platform_device n30_button_device = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &n30_button_data,
+        }
+};
+
+static struct gpio_keys_button n35_buttons[] = {
+        {
+                .gpio           = S3C2410_GPF0,
+                .code           = KEY_POWER,
+                .desc           = "Power",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPG9,
+                .code           = KEY_UP,
+                .desc           = "Joystick Up",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPG8,
+                .code           = KEY_DOWN,
+                .desc           = "Joystick Down",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPG6,
+                .code           = KEY_DOWN,
+                .desc           = "Joystick Left",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPG5,
+                .code           = KEY_DOWN,
+                .desc           = "Joystick Right",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPG7,
+                .code           = KEY_ENTER,
+                .desc           = "Joystick Press",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPF7,
+                .code           = KEY_HOMEPAGE,
+                .desc           = "Home",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPF6,
+                .code           = KEY_CALENDAR,
+                .desc           = "Calendar",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPF5,
+                .code           = KEY_ADDRESSBOOK,
+                .desc           = "Contacts",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPF4,
+                .code           = KEY_MAIL,
+                .desc           = "Mail",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPF3,
+                .code           = SW_RADIO,
+                .desc           = "GPS Antenna",
+                .active_low     = 0,
+        },
+        {
+                .gpio           = S3C2410_GPG2,
+                .code           = SW_HEADPHONE_INSERT,
+                .desc           = "Headphone",
+                .active_low     = 0,
+        },
+};
+
+static struct gpio_keys_platform_data n35_button_data = {
+        .buttons        = n35_buttons,
+        .nbuttons       = ARRAY_SIZE(n35_buttons),
+};
+
+static struct platform_device n35_button_device = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .num_resources  = 0,
+        .dev            = {
+                .platform_data  = &n35_button_data,
+        }
+};
+
+/* This is the bluetooth LED on the device. */
+static struct s3c24xx_led_platdata n30_blue_led_pdata = {
+        .name           = "blue_led",
+        .gpio           = S3C2410_GPG6,
+        .def_trigger    = "",
+};
+
+/* This LED is driven by the battery microcontroller, and is blinking
+ * red, blinking green or solid green when the battery is low,
+ * charging or full respectively.  By driving GPD9 low, it's possible
+ * to force the LED to blink red, so call that warning LED.  */
+static struct s3c24xx_led_platdata n30_warning_led_pdata = {
+        .name           = "warning_led",
+        .flags          = S3C24XX_LEDF_ACTLOW,
+        .gpio           = S3C2410_GPD9,
+        .def_trigger    = "",
+};
+
+static struct platform_device n30_blue_led = {
+        .name           = "s3c24xx_led",
+        .id             = 1,
+        .dev            = {
+                .platform_data  = &n30_blue_led_pdata,
+        },
+};
+
+static struct platform_device n30_warning_led = {
+        .name           = "s3c24xx_led",
+        .id             = 2,
+        .dev            = {
+                .platform_data  = &n30_warning_led_pdata,
+        },
+};
+
+static struct s3c2410fb_display n30_display __initdata = {
+        .type           = S3C2410_LCDCON1_TFT,
+        .width          = 240,
+        .height         = 320,
+        .pixclock       = 170000,
+
+        .xres           = 240,
+        .yres           = 320,
+        .bpp            = 16,
+        .left_margin    = 3,
+        .right_margin   = 40,
+        .hsync_len      = 40,
+        .upper_margin   = 2,
+        .lower_margin   = 3,
+        .vsync_len      = 2,
+
+        .lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME,
+};
+
+static struct s3c2410fb_mach_info n30_fb_info __initdata = {
+        .displays       = &n30_display,
+        .num_displays   = 1,
+        .default_display = 0,
+        .lpcsel         = 0x06,
+};
+
 static struct platform_device *n30_devices[] __initdata = {
+        &s3c_device_lcd,
+        &s3c_device_wdt,
+        &s3c_device_i2c,
+        &s3c_device_iis,
         &s3c_device_usb,
+        &s3c_device_usbgadget,
+        &n30_button_device,
+        &n30_blue_led,
+        &n30_warning_led,
+};
+
+static struct platform_device *n35_devices[] __initdata = {
         &s3c_device_lcd,
         &s3c_device_wdt,
         &s3c_device_i2c,
         &s3c_device_iis,
         &s3c_device_usbgadget,
+        &n35_button_device,
 };
 
 static struct s3c2410_platform_i2c n30_i2ccfg = {
@@ -90,9 +345,148 @@ static struct s3c2410_platform_i2c n30_i2ccfg = {
         .max_freq       = 10*1000,
 };
 
+/* Lots of hardcoded stuff, but it sets up the hardware in a useful
+ * state so that we can boot Linux directly from flash. */
+static void __init n30_hwinit(void)
+{
+        /* GPA0-11 special functions -- unknown what they do
+         * GPA12 N30 special function -- unknown what it does
+         *       N35/PiN output -- unknown what it does
+         *
+         * A12 is nGCS1 on the N30 and an output on the N35/PiN.  I
+         * don't think it does anything useful on the N30, so I ought
+         * to make it an output there too since it always driven to 0
+         * as far as I can tell. */
+        if (machine_is_n30())
+                __raw_writel(0x007fffff, S3C2410_GPACON);
+        if (machine_is_n35())
+                __raw_writel(0x007fefff, S3C2410_GPACON);
+        __raw_writel(0x00000000, S3C2410_GPADAT);
+
+        /* GPB0 TOUT0 backlight level
+         * GPB1 output 1=backlight on
+         * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled
+         * GPB3 output USB D+ pull up 0=disabled, 1=enabled
+         * GPB4 N30 output -- unknown function
+         *      N30/PiN GPS control 0=GPS enabled, 1=GPS disabled
+         * GPB5 output -- unknown function
+         * GPB6 input -- unknown function
+         * GPB7 output -- unknown function
+         * GPB8 output -- probably LCD driver enable
+         * GPB9 output -- probably LCD VSYNC driver enable
+         * GPB10 output -- probably LCD HSYNC driver enable
+         */
+        __raw_writel(0x00154556, S3C2410_GPBCON);
+        __raw_writel(0x00000750, S3C2410_GPBDAT);
+        __raw_writel(0x00000073, S3C2410_GPBUP);
+
+        /* GPC0 input RS232 DCD/DSR/RI
+         * GPC1 LCD
+         * GPC2 output RS232 DTR?
+         * GPC3 input RS232 DCD/DSR/RI
+         * GPC4 LCD
+         * GPC5 output 0=NAND write enabled, 1=NAND write protect
+         * GPC6 input -- unknown function
+         * GPC7 input charger status 0=charger connected
+         *      this input can be triggered by power on the USB device
+         *      port too, but will go back to disconnected soon after.
+         * GPC8 N30/N35 output -- unknown function, always driven to 1
+         *      PiN input -- unknown function, always read as 1
+         *      Make it an input with a pull up for all models.
+         * GPC9-15 LCD
+         */
+        __raw_writel(0xaaa80618, S3C2410_GPCCON);
+        __raw_writel(0x0000014c, S3C2410_GPCDAT);
+        __raw_writel(0x0000fef2, S3C2410_GPCUP);
+
+        /* GPD0 input -- unknown function
+         * GPD1-D7 LCD
+         * GPD8 N30 output -- unknown function
+         *      N35/PiN output 1=GPS LED on
+         * GPD9 output 0=power led blinks red, 1=normal power led function
+         * GPD10 output -- unknown function
+         * GPD11-15 LCD drivers
+         */
+        __raw_writel(0xaa95aaa4, S3C2410_GPDCON);
+        __raw_writel(0x00000601, S3C2410_GPDDAT);
+        __raw_writel(0x0000fbfe, S3C2410_GPDUP);
+
+        /* GPE0-4 I2S audio bus
+         * GPE5-10 SD/MMC bus
+         * E11-13 outputs -- unknown function, probably power management
+         * E14-15 I2C bus connected to the battery controller
+         */
+        __raw_writel(0xa56aaaaa, S3C2410_GPECON);
+        __raw_writel(0x0000efc5, S3C2410_GPEDAT);
+        __raw_writel(0x0000f81f, S3C2410_GPEUP);
+
+        /* GPF0  input 0=power button pressed
+         * GPF1  input SD/MMC switch 0=card present
+         * GPF2  N30 1=reset button pressed (inverted compared to the rest)
+         *       N35/PiN 0=reset button pressed
+         * GPF3  N30/PiN input -- unknown function
+         *       N35 input GPS antenna position, 0=antenna closed, 1=open
+         * GPF4  input 0=button 4 pressed
+         * GPF5  input 0=button 3 pressed
+         * GPF6  input 0=button 2 pressed
+         * GPF7  input 0=button 1 pressed
+         */
+        __raw_writel(0x0000aaaa, S3C2410_GPFCON);
+        __raw_writel(0x00000000, S3C2410_GPFDAT);
+        __raw_writel(0x000000ff, S3C2410_GPFUP);
+
+        /* GPG0  input RS232 DCD/DSR/RI
+         * GPG1  input 1=USB gadget port has power from a host
+         * GPG2  N30 input -- unknown function
+         *       N35/PiN input 0=headphones plugged in, 1=not plugged in
+         * GPG3  N30 output -- unknown function
+         *       N35/PiN input with unknown function
+         * GPG4  N30 output 0=MMC enabled, 1=MMC disabled
+         * GPG5  N30 output 0=BlueTooth chip disabled, 1=enabled
+         *       N35/PiN input joystick right
+         * GPG6  N30 output 0=blue led on, 1=off
+         *       N35/PiN input joystick left
+         * GPG7  input 0=thumbwheel pressed
+         * GPG8  input 0=thumbwheel down
+         * GPG9  input 0=thumbwheel up
+         * GPG10 input SD/MMC write protect switch
+         * GPG11 N30 input -- unknown function
+         *       N35 output 0=GPS antenna powered, 1=not powered
+         *       PiN output -- unknown function
+         * GPG12-15 touch screen functions
+         *
+         * The pullups differ between the models, so enable all
+         * pullups that are enabled on any of the models.
+         */
+        if (machine_is_n30())
+                __raw_writel(0xff0a956a, S3C2410_GPGCON);
+        if (machine_is_n35())
+                __raw_writel(0xff4aa92a, S3C2410_GPGCON);
+        __raw_writel(0x0000e800, S3C2410_GPGDAT);
+        __raw_writel(0x0000f86f, S3C2410_GPGUP);
+
+        /* GPH0/1/2/3 RS232 serial port
+         * GPH4/5 IrDA serial port
+         * GPH6/7  N30 BlueTooth serial port
+         *         N35/PiN GPS receiver
+         * GPH8 input -- unknown function
+         * GPH9 CLKOUT0 HCLK -- unknown use
+         * GPH10 CLKOUT1 FCLK -- unknown use
+         *
+         * The pull ups for H6/H7 are enabled on N30 but not on the
+         * N35/PiN.  I suppose is useful for a budget model of the N30
+         * with no bluetooh.  It doesn't hurt to have the pull ups
+         * enabled on the N35, so leave them enabled for all models.
+         */
+        __raw_writel(0x0028aaaa, S3C2410_GPHCON);
+        __raw_writel(0x000005ef, S3C2410_GPHDAT);
+        __raw_writel(0x0000063f, S3C2410_GPHUP);
+}
+
 static void __init n30_map_io(void)
 {
         s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
+        n30_hwinit();
         s3c24xx_init_clocks(0);
         s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
 }
@@ -106,7 +500,9 @@ static void __init n30_init_irq(void)
 
 static void __init n30_init(void)
 {
+        s3c24xx_fb_set_platdata(&n30_fb_info);
         s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
+        s3c24xx_udc_set_platdata(&n30_udc_cfg);
 
         /* Turn off suspend on both USB ports, and switch the
          * selectable USB port to USB device mode. */
@@ -115,7 +511,32 @@ static void __init n30_init(void)
                               S3C2410_MISCCR_USBSUSPND0 |
                               S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-        platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
+        if (machine_is_n30()) {
+                /* Turn off suspend on both USB ports, and switch the
+                 * selectable USB port to USB device mode. */
+                s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+                                      S3C2410_MISCCR_USBSUSPND0 |
+                                      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+                platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
+        }
+
+        if (machine_is_n35()) {
+                /* Turn off suspend and switch the selectable USB port
+                 * to USB device mode.  Turn on suspend for the host
+                 * port since it is not connected on the N35.
+                 *
+                 * Actually, the host port is available at some pads
+                 * on the back of the device, so it would actually be
+                 * possible to add a USB device inside the N35 if you
+                 * are willing to do some hardware modifications. */
+                s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+                                      S3C2410_MISCCR_USBSUSPND0 |
+                                      S3C2410_MISCCR_USBSUSPND1,
+                                      S3C2410_MISCCR_USBSUSPND1);
+
+                platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
+        }
 }
 
 MACHINE_START(N30, "Acer-N30")
@@ -131,9 +552,14 @@ MACHINE_START(N30, "Acer-N30")
         .map_io         = n30_map_io,
 MACHINE_END
 
-/*
-    Local variables:
-        compile-command: "make ARCH=arm CROSS_COMPILE=/usr/local/arm/3.3.2/bin/arm-linux- -k -C ../../.."
-        c-basic-offset: 8
-    End:
-*/
+MACHINE_START(N35, "Acer-N35")
+        /* Maintainer: Christer Weinigel <christer@weinigel.se>
+        */
+        .phys_io        = S3C2410_PA_UART,
+        .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .timer          = &s3c24xx_timer,
+        .init_machine   = n30_init,
+        .init_irq       = n30_init_irq,
+        .map_io         = n30_map_io,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 4c4b5c4207c4..9a0965ac5e11 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-vr1000.c
  *
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2005,2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * Machine support for Thorcom VR1000 board. Designed for Thorcom by
@@ -19,6 +19,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/dm9000.h>
+#include <linux/i2c.h>
 
 #include <linux/serial.h>
 #include <linux/tty.h>
@@ -46,7 +47,9 @@
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
+
 #include "usb-simtec.h"
+#include "nor-simtec.h"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -97,34 +100,6 @@ static struct map_desc vr1000_iodesc[] __initdata = {
           .length       = SZ_1M,
           .type         = MT_DEVICE,
   },
-
-  /* peripheral space... one for each of fast/slow/byte/16bit */
-  /* note, ide is only decoded in word space, even though some registers
-   * are only 8bit */
-
-  /* slow, byte */
-  { VA_C2(VR1000_VA_IDEPRI),  PA_CS3(VR1000_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
-  { VA_C2(VR1000_VA_IDESEC),  PA_CS3(VR1000_PA_IDESEC),   SZ_1M,  MT_DEVICE },
-  { VA_C2(VR1000_VA_IDEPRIAUX), PA_CS3(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C2(VR1000_VA_IDESECAUX), PA_CS3(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
-
-  /* slow, word */
-  { VA_C3(VR1000_VA_IDEPRI),  PA_CS3(VR1000_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
-  { VA_C3(VR1000_VA_IDESEC),  PA_CS3(VR1000_PA_IDESEC),   SZ_1M,  MT_DEVICE },
-  { VA_C3(VR1000_VA_IDEPRIAUX), PA_CS3(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C3(VR1000_VA_IDESECAUX), PA_CS3(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
-
-  /* fast, byte */
-  { VA_C4(VR1000_VA_IDEPRI),  PA_CS5(VR1000_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
-  { VA_C4(VR1000_VA_IDESEC),  PA_CS5(VR1000_PA_IDESEC),   SZ_1M,  MT_DEVICE },
-  { VA_C4(VR1000_VA_IDEPRIAUX), PA_CS5(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C4(VR1000_VA_IDESECAUX), PA_CS5(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
-
-  /* fast, word */
-  { VA_C5(VR1000_VA_IDEPRI),  PA_CS5(VR1000_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
-  { VA_C5(VR1000_VA_IDESEC),  PA_CS5(VR1000_PA_IDESEC),   SZ_1M,  MT_DEVICE },
-  { VA_C5(VR1000_VA_IDEPRIAUX), PA_CS5(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE },
-  { VA_C5(VR1000_VA_IDESECAUX), PA_CS5(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE },
 };
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
@@ -230,23 +205,6 @@ static struct platform_device serial_device = {
         },
 };
 
-/* MTD NOR Flash */
-
-static struct resource vr1000_nor_resource[] = {
-        [0] = {
-                .start  = S3C2410_CS1 + 0x4000000,
-                .end    = S3C2410_CS1 + 0x4000000 + SZ_16M - 1,
-                .flags  = IORESOURCE_MEM,
-        }
-};
-
-static struct platform_device vr1000_nor = {
-        .name           = "bast-nor",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(vr1000_nor_resource),
-        .resource       = vr1000_nor_resource,
-};
-
 /* DM9000 ethernet devices */
 
 static struct resource vr1000_dm9k0_resource[] = {
@@ -263,7 +221,7 @@ static struct resource vr1000_dm9k0_resource[] = {
         [2] = {
                 .start = IRQ_VR1000_DM9000A,
                 .end   = IRQ_VR1000_DM9000A,
-                .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
         }
 
 };
@@ -282,7 +240,7 @@ static struct resource vr1000_dm9k1_resource[] = {
         [2] = {
                 .start = IRQ_VR1000_DM9000N,
                 .end   = IRQ_VR1000_DM9000N,
-                .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
         }
 };
 
@@ -358,6 +316,18 @@ static struct platform_device vr1000_led3 = {
         },
 };
 
+/* I2C devices. */
+
+static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
+        {
+                I2C_BOARD_INFO("tlv320aic23", 0x1a),
+        }, {
+                I2C_BOARD_INFO("tmp101", 0x48),
+        }, {
+                I2C_BOARD_INFO("m41st87", 0x68),
+        },
+};
+
 /* devices for this board */
 
 static struct platform_device *vr1000_devices[] __initdata = {
@@ -367,7 +337,6 @@ static struct platform_device *vr1000_devices[] __initdata = {
         &s3c_device_i2c,
         &s3c_device_adc,
         &serial_device,
-        &vr1000_nor,
         &vr1000_dm9k0,
         &vr1000_dm9k1,
         &vr1000_led1,
@@ -416,6 +385,11 @@ static void __init vr1000_map_io(void)
 static void __init vr1000_init(void)
 {
         platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
+
+        i2c_register_board_info(0, vr1000_i2c_devs,
+                                ARRAY_SIZE(vr1000_i2c_devs));
+
+        nor_simtec_init();
 }
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
new file mode 100644
index 000000000000..f44e21b9c3ba
--- /dev/null
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/mach-s3c2410/nor-simtec.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec NOR mapping
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/bast-map.h>
+#include <asm/arch/bast-cpld.h>
+
+
+static void simtec_nor_vpp(struct map_info *map, int vpp)
+{
+        unsigned int val;
+        unsigned long flags;
+
+        local_irq_save(flags);
+        val = __raw_readb(BAST_VA_CTRL3);
+
+        printk(KERN_DEBUG "%s(%d)\n", __func__, vpp);
+
+        if (vpp)
+                val |= BAST_CPLD_CTRL3_ROMWEN;
+        else
+                val &= ~BAST_CPLD_CTRL3_ROMWEN;
+
+        __raw_writeb(val, BAST_VA_CTRL3);
+        local_irq_restore(flags);
+}
+
+struct physmap_flash_data simtec_nor_pdata = {
+        .width          = 2,
+        .set_vpp        = simtec_nor_vpp,
+        .nr_parts       = 0,
+};
+
+static struct resource simtec_nor_resource[] = {
+        [0] = {
+                .start = S3C2410_CS1 + 0x4000000,
+                .end   = S3C2410_CS1 + 0x4000000 + SZ_8M - 1,
+                .flags = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device simtec_device_nor = {
+        .name           = "physmap-flash",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(simtec_nor_resource),
+        .resource       = simtec_nor_resource,
+        .dev            = {
+                .platform_data = &simtec_nor_pdata,
+        },
+};
+
+void __init nor_simtec_init(void)
+{
+        int ret;
+
+        ret = platform_device_register(&simtec_device_nor);
+        if (ret < 0)
+                printk(KERN_ERR "failed to register physmap-flash device\n");
+        else
+                simtec_nor_vpp(NULL, 1);
+}
diff --git a/arch/arm/mach-s3c2410/nor-simtec.h b/arch/arm/mach-s3c2410/nor-simtec.h
new file mode 100644
index 000000000000..f619c1e0d0c8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/nor-simtec.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s3c2410/nor-simtec.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec NOR mapping
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void nor_simtec_init(void);
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 0b43431d4b75..c59a9d2ee9a6 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -34,6 +34,16 @@ config S3C2412_PM
 
 menu "S3C2412 Machines"
 
+config MACH_JIVE
+        bool "Logitech Jive"
+        select CPU_S3C2412
+        help
+          Say Y here if you are using the Logitech Jive.
+
+config MACH_JIVE_SHOW_BOOTLOADER
+        bool "Allow access to bootloader partitions in MTD"
+        depends on MACH_JIVE && EXPERIMENTAL
+
 config MACH_SMDK2413
         bool "SMDK2413"
         select CPU_S3C2412
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 267f3348301e..20918d5dc6a9 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -18,5 +18,6 @@ obj-$(CONFIG_S3C2412_PM)	+= pm.o sleep.o
 
 # Machine support
 
+obj-$(CONFIG_MACH_JIVE)         += mach-jive.o
 obj-$(CONFIG_MACH_SMDK2413)     += mach-smdk2413.o
 obj-$(CONFIG_MACH_VSTMS)        += mach-vstms.o
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 2697a65ba727..1157b5a16263 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -631,6 +631,17 @@ static struct clk_init clks_src[] __initdata = {
                 .bit    = S3C2412_CLKSRC_USBCLK_HCLK,
                 .src_0  = &clk_usysclk,
                 .src_1  = &clk_h,
+        /* here we assume  OM[4] select xtal */
+        }, {
+                .clk    = &clk_erefclk,
+                .bit    = S3C2412_CLKSRC_EREFCLK_EXTCLK,
+                .src_0  = &clk_xtal,
+                .src_1  = &clk_ext,
+        }, {
+                .clk    = &clk_urefclk,
+                .bit    = S3C2412_CLKSRC_UREFCLK_EXTCLK,
+                .src_0  = &clk_xtal,
+                .src_1  = &clk_ext,
         },
 };
 
@@ -666,8 +677,6 @@ static void __init s3c2412_clk_initparents(void)
 static struct clk *clks[] __initdata = {
         &clk_ext,
         &clk_usb_bus,
-        &clk_erefclk,
-        &clk_urefclk,
         &clk_mrefclk,
         &clk_armclk,
 };
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
new file mode 100644
index 000000000000..7f5924713485
--- /dev/null
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -0,0 +1,687 @@
+/* linux/arch/arm/mach-s3c2410/mach-jive.c
+ *
+ * Copyright 2007 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#include <video/ili9320.h>
+
+#include <linux/spi/spi.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/plat-s3c/nand.h>
+#include <asm/plat-s3c/iic.h>
+
+#include <asm/arch/regs-power.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/spi-gpio.h>
+#include <asm/arch/fb.h>
+
+#include <asm/mach-types.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/udc.h>
+
+static struct map_desc jive_iodesc[] __initdata = {
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg jive_uartcfgs[] = {
+        [0] = {
+                .hwport      = 0,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        },
+        [1] = {
+                .hwport      = 1,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        },
+        [2] = {
+                .hwport      = 2,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        }
+};
+
+/* Jive flash assignment
+ *
+ * 0x00000000-0x00028000 : uboot
+ * 0x00028000-0x0002c000 : uboot env
+ * 0x0002c000-0x00030000 : spare
+ * 0x00030000-0x00200000 : zimage A
+ * 0x00200000-0x01600000 : cramfs A
+ * 0x01600000-0x017d0000 : zimage B
+ * 0x017d0000-0x02bd0000 : cramfs B
+ * 0x02bd0000-0x03fd0000 : yaffs
+ */
+static struct mtd_partition jive_imageA_nand_part[] = {
+
+#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
+        /* Don't allow access to the bootloader from linux */
+        {
+                .name           = "uboot",
+                .offset         = 0,
+                .size           = (160 * SZ_1K),
+                .mask_flags     = MTD_WRITEABLE, /* force read-only */
+        },
+
+        /* spare */
+        {
+                .name           = "spare",
+                .offset         = (176 * SZ_1K),
+                .size           = (16 * SZ_1K),
+        },
+#endif
+
+        /* booted images */
+        {
+                .name           = "kernel (ro)",
+                .offset         = (192 * SZ_1K),
+                .size           = (SZ_2M) - (192 * SZ_1K),
+                .mask_flags     = MTD_WRITEABLE, /* force read-only */
+        }, {
+                .name           = "root (ro)",
+                .offset         = (SZ_2M),
+                .size           = (20 * SZ_1M),
+                .mask_flags     = MTD_WRITEABLE, /* force read-only */
+        },
+
+        /* yaffs */
+        {
+                .name           = "yaffs",
+                .offset         = (44 * SZ_1M),
+                .size           = (20 * SZ_1M),
+        },
+
+        /* bootloader environment */
+        {
+                .name           = "env",
+                .offset         = (160 * SZ_1K),
+                .size           = (16 * SZ_1K),
+        },
+
+        /* upgrade images */
+        {
+                .name           = "zimage",
+                .offset         = (22 * SZ_1M),
+                .size           = (2 * SZ_1M) - (192 * SZ_1K),
+        }, {
+                .name           = "cramfs",
+                .offset         = (24 * SZ_1M) - (192*SZ_1K),
+                .size           = (20 * SZ_1M),
+        },
+};
+
+static struct mtd_partition jive_imageB_nand_part[] = {
+
+#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
+        /* Don't allow access to the bootloader from linux */
+        {
+                .name           = "uboot",
+                .offset         = 0,
+                .size           = (160 * SZ_1K),
+                .mask_flags     = MTD_WRITEABLE, /* force read-only */
+        },
+
+        /* spare */
+        {
+                .name           = "spare",
+                .offset         = (176 * SZ_1K),
+                .size           = (16 * SZ_1K),
+        },
+#endif
+
+        /* booted images */
+        {
+                .name           = "kernel (ro)",
+                .offset         = (22 * SZ_1M),
+                .size           = (2 * SZ_1M) - (192 * SZ_1K),
+                .mask_flags     = MTD_WRITEABLE, /* force read-only */
+        },
+        {
+                .name           = "root (ro)",
+                .offset         = (24 * SZ_1M) - (192 * SZ_1K),
+                .size           = (20 * SZ_1M),
+                .mask_flags     = MTD_WRITEABLE, /* force read-only */
+        },
+
+        /* yaffs */
+        {
+                .name           = "yaffs",
+                .offset         = (44 * SZ_1M),
+                .size           = (20 * SZ_1M),
+        },
+
+        /* bootloader environment */
+        {
+                .name           = "env",
+                .offset         = (160 * SZ_1K),
+                .size           = (16 * SZ_1K),
+        },
+
+        /* upgrade images */
+        {
+                .name           = "zimage",
+                .offset         = (192 * SZ_1K),
+                .size           = (2 * SZ_1M) - (192 * SZ_1K),
+        }, {
+                .name           = "cramfs",
+                .offset         = (2 * SZ_1M),
+                .size           = (20 * SZ_1M),
+        },
+};
+
+static struct s3c2410_nand_set jive_nand_sets[] = {
+        [0] = {
+                .name           = "flash",
+                .nr_chips       = 1,
+                .nr_partitions  = ARRAY_SIZE(jive_imageA_nand_part),
+                .partitions     = jive_imageA_nand_part,
+        },
+};
+
+static struct s3c2410_platform_nand jive_nand_info = {
+        /* set taken from osiris nand timings, possibly still conservative */
+        .tacls          = 30,
+        .twrph0         = 55,
+        .twrph1         = 40,
+        .sets           = jive_nand_sets,
+        .nr_sets        = ARRAY_SIZE(jive_nand_sets),
+};
+
+static int __init jive_mtdset(char *options)
+{
+        struct s3c2410_nand_set *nand = &jive_nand_sets[0];
+        unsigned long set;
+
+        if (options == NULL || options[0] == '\0')
+                return 0;
+
+        if (strict_strtoul(options, 10, &set)) {
+                printk(KERN_ERR "failed to parse mtdset=%s\n", options);
+                return 0;
+        }
+
+        switch (set) {
+        case 1:
+                nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
+                nand->partitions = jive_imageB_nand_part;
+        case 0:
+                /* this is already setup in the nand info */
+                break;
+        default:
+                printk(KERN_ERR "Unknown mtd set %ld specified,"
+                       "using default.", set);
+        }
+
+        return 0;
+}
+
+/* parse the mtdset= option given to the kernel command line */
+__setup("mtdset=", jive_mtdset);
+
+/* LCD timing and setup */
+
+#define LCD_XRES         (240)
+#define LCD_YRES         (320)
+#define LCD_LEFT_MARGIN  (12)
+#define LCD_RIGHT_MARGIN (12)
+#define LCD_LOWER_MARGIN (12)
+#define LCD_UPPER_MARGIN (12)
+#define LCD_VSYNC        (2)
+#define LCD_HSYNC        (2)
+
+#define LCD_REFRESH      (60)
+
+#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
+#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
+
+struct s3c2410fb_display jive_vgg2432a4_display[] = {
+        [0] = {
+                .width          = LCD_XRES,
+                .height         = LCD_YRES,
+                .xres           = LCD_XRES,
+                .yres           = LCD_YRES,
+                .left_margin    = LCD_LEFT_MARGIN,
+                .right_margin   = LCD_RIGHT_MARGIN,
+                .upper_margin   = LCD_UPPER_MARGIN,
+                .lower_margin   = LCD_LOWER_MARGIN,
+                .hsync_len      = LCD_HSYNC,
+                .vsync_len      = LCD_VSYNC,
+
+                .pixclock       = (1000000000000LL /
+                                   (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
+
+                .bpp            = 16,
+                .type           = (S3C2410_LCDCON1_TFT16BPP |
+                                   S3C2410_LCDCON1_TFT),
+
+                .lcdcon5        = (S3C2410_LCDCON5_FRM565 |
+                                   S3C2410_LCDCON5_INVVLINE |
+                                   S3C2410_LCDCON5_INVVFRAME |
+                                   S3C2410_LCDCON5_INVVDEN |
+                                   S3C2410_LCDCON5_PWREN),
+        },
+};
+
+/* todo - put into gpio header */
+
+#define S3C2410_GPCCON_MASK(x)  (3 << ((x) * 2))
+#define S3C2410_GPDCON_MASK(x)  (3 << ((x) * 2))
+
+struct s3c2410fb_mach_info jive_lcd_config = {
+        .displays        = jive_vgg2432a4_display,
+        .num_displays    = ARRAY_SIZE(jive_vgg2432a4_display),
+        .default_display = 0,
+
+        /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
+         * and disable the pull down resistors on pins we are using for LCD
+         * data. */
+
+        .gpcup          = (0xf << 1) | (0x3f << 10),
+
+        .gpccon         = (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
+                           S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
+                           S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
+                           S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
+                           S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
+
+        .gpccon_mask    = (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
+                           S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
+                           S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
+                           S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
+                           S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+
+        .gpdup          = (0x3f << 2) | (0x3f << 10),
+
+        .gpdcon         = (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
+                           S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
+                           S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
+                           S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
+                           S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
+                           S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
+
+        .gpdcon_mask    = (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
+                           S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
+                           S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
+                           S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
+                           S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
+                           S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+};
+
+/* ILI9320 support. */
+
+static void jive_lcm_reset(unsigned int set)
+{
+        printk(KERN_DEBUG "%s(%d)\n", __func__, set);
+
+        s3c2410_gpio_setpin(S3C2410_GPG13, set);
+        s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+}
+
+#undef LCD_UPPER_MARGIN
+#define LCD_UPPER_MARGIN 2
+
+static struct ili9320_platdata jive_lcm_config = {
+        .hsize          = LCD_XRES,
+        .vsize          = LCD_YRES,
+
+        .reset          = jive_lcm_reset,
+        .suspend        = ILI9320_SUSPEND_DEEP,
+
+        .entry_mode     = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
+        .display2       = (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
+                           ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
+        .display3       = 0x0,
+        .display4       = 0x0,
+        .rgb_if1        = (ILI9320_RGBIF1_RIM_RGB18 |
+                           ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
+        .rgb_if2        = ILI9320_RGBIF2_DPL,
+        .interface2     = 0x0,
+        .interface3     = 0x3,
+        .interface4     = (ILI9320_INTERFACE4_RTNE(16) |
+                           ILI9320_INTERFACE4_DIVE(1)),
+        .interface5     = 0x0,
+        .interface6     = 0x0,
+};
+
+/* LCD SPI support */
+
+static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
+{
+        s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
+}
+
+static struct s3c2410_spigpio_info jive_lcd_spi = {
+        .bus_num        = 0,
+        .pin_clk        = S3C2410_GPG8,
+        .pin_mosi       = S3C2410_GPB8,
+        .chip_select    = jive_lcd_spi_chipselect,
+};
+
+static struct platform_device jive_device_lcdspi = {
+        .name           = "s3c24xx-spi-gpio",
+        .id             = 1,
+        .num_resources  = 0,
+        .dev.platform_data = &jive_lcd_spi,
+};
+
+/* WM8750 audio code SPI definition */
+
+static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
+{
+        s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
+}
+
+static struct s3c2410_spigpio_info jive_wm8750_spi = {
+        .bus_num        = 2,
+        .pin_clk        = S3C2410_GPB4,
+        .pin_mosi       = S3C2410_GPB9,
+        .chip_select    = jive_wm8750_chipselect,
+};
+
+static struct platform_device jive_device_wm8750 = {
+        .name           = "s3c24xx-spi-gpio",
+        .id             = 2,
+        .num_resources  = 0,
+        .dev.platform_data = &jive_wm8750_spi,
+};
+
+/* JIVE SPI devices. */
+
+static struct spi_board_info __initdata jive_spi_devs[] = {
+        [0] = {
+                .modalias       = "VGG2432A4",
+                .bus_num        = 1,
+                .chip_select    = 0,
+                .mode           = SPI_MODE_3,   /* CPOL=1, CPHA=1 */
+                .max_speed_hz   = 100000,
+                .platform_data  = &jive_lcm_config,
+        }, {
+                .modalias       = "WM8750",
+                .bus_num        = 2,
+                .chip_select    = 0,
+                .mode           = SPI_MODE_0,   /* CPOL=0, CPHA=0 */
+                .max_speed_hz   = 100000,
+        },
+};
+
+/* I2C bus and device configuration. */
+
+static struct s3c2410_platform_i2c jive_i2c_cfg = {
+        .max_freq       = 80 * 1000,
+        .bus_freq       = 50 * 1000,
+        .flags          = S3C_IICFLG_FILTER,
+        .sda_delay      = 2,
+};
+
+static struct i2c_board_info jive_i2c_devs[] = {
+        [0] = {
+                I2C_BOARD_INFO("lis302dl", 0x1c),
+                .irq    = IRQ_EINT14,
+        },
+};
+
+/* The platform devices being used. */
+
+static struct platform_device *jive_devices[] __initdata = {
+        &s3c_device_usb,
+        &s3c_device_rtc,
+        &s3c_device_wdt,
+        &s3c_device_i2c,
+        &s3c_device_lcd,
+        &jive_device_lcdspi,
+        &jive_device_wm8750,
+        &s3c_device_nand,
+        &s3c_device_usbgadget,
+};
+
+static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
+        .vbus_pin       = S3C2410_GPG1,         /* detect is on GPG1 */
+};
+
+/* Jive power management device */
+
+#ifdef CONFIG_PM
+static int jive_pm_suspend(struct sys_device *sd, pm_message_t state)
+{
+        /* Write the magic value u-boot uses to check for resume into
+         * the INFORM0 register, and ensure INFORM1 is set to the
+         * correct address to resume from. */
+
+        __raw_writel(0x2BED, S3C2412_INFORM0);
+        __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2412_INFORM1);
+
+        return 0;
+}
+
+static int jive_pm_resume(struct sys_device *sd)
+{
+        __raw_writel(0x0, S3C2412_INFORM0);
+        return 0;
+}
+
+#else
+#define jive_pm_suspend NULL
+#define jive_pm_resume NULL
+#endif
+
+static struct sysdev_class jive_pm_sysclass = {
+        .name           = "jive-pm",
+        .suspend        = jive_pm_suspend,
+        .resume         = jive_pm_resume,
+};
+
+static struct sys_device jive_pm_sysdev = {
+        .cls            = &jive_pm_sysclass,
+};
+
+static void __init jive_map_io(void)
+{
+        s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
+        s3c24xx_init_clocks(12000000);
+        s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+}
+
+static void jive_power_off(void)
+{
+        printk(KERN_INFO "powering system down...\n");
+
+        s3c2410_gpio_setpin(S3C2410_GPC5, 1);
+        s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+}
+
+static void __init jive_machine_init(void)
+{
+        /* register system devices for managing low level suspend */
+
+        sysdev_class_register(&jive_pm_sysclass);
+        sysdev_register(&jive_pm_sysdev);
+
+        /* write our sleep configurations for the IO. Pull down all unused
+         * IO, ensure that we have turned off all peripherals we do not
+         * need, and configure the ones we do need. */
+
+        /* Port B sleep */
+
+        __raw_writel(S3C2412_SLPCON_IN(0)   |
+                     S3C2412_SLPCON_PULL(1) |
+                     S3C2412_SLPCON_HIGH(2) |
+                     S3C2412_SLPCON_PULL(3) |
+                     S3C2412_SLPCON_PULL(4) |
+                     S3C2412_SLPCON_PULL(5) |
+                     S3C2412_SLPCON_PULL(6) |
+                     S3C2412_SLPCON_HIGH(7) |
+                     S3C2412_SLPCON_PULL(8) |
+                     S3C2412_SLPCON_PULL(9) |
+                     S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
+
+        /* Port C sleep */
+
+        __raw_writel(S3C2412_SLPCON_PULL(0) |
+                     S3C2412_SLPCON_PULL(1) |
+                     S3C2412_SLPCON_PULL(2) |
+                     S3C2412_SLPCON_PULL(3) |
+                     S3C2412_SLPCON_PULL(4) |
+                     S3C2412_SLPCON_PULL(5) |
+                     S3C2412_SLPCON_LOW(6)  |
+                     S3C2412_SLPCON_PULL(6) |
+                     S3C2412_SLPCON_PULL(7) |
+                     S3C2412_SLPCON_PULL(8) |
+                     S3C2412_SLPCON_PULL(9) |
+                     S3C2412_SLPCON_PULL(10) |
+                     S3C2412_SLPCON_PULL(11) |
+                     S3C2412_SLPCON_PULL(12) |
+                     S3C2412_SLPCON_PULL(13) |
+                     S3C2412_SLPCON_PULL(14) |
+                     S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
+
+        /* Port D sleep */
+
+        __raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
+
+        /* Port F sleep */
+
+        __raw_writel(S3C2412_SLPCON_LOW(0)  |
+                     S3C2412_SLPCON_LOW(1)  |
+                     S3C2412_SLPCON_LOW(2)  |
+                     S3C2412_SLPCON_EINT(3) |
+                     S3C2412_SLPCON_EINT(4) |
+                     S3C2412_SLPCON_EINT(5) |
+                     S3C2412_SLPCON_EINT(6) |
+                     S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
+
+        /* Port G sleep */
+
+        __raw_writel(S3C2412_SLPCON_IN(0)    |
+                     S3C2412_SLPCON_IN(1)    |
+                     S3C2412_SLPCON_IN(2)    |
+                     S3C2412_SLPCON_IN(3)    |
+                     S3C2412_SLPCON_IN(4)    |
+                     S3C2412_SLPCON_IN(5)    |
+                     S3C2412_SLPCON_IN(6)    |
+                     S3C2412_SLPCON_IN(7)    |
+                     S3C2412_SLPCON_PULL(8)  |
+                     S3C2412_SLPCON_PULL(9)  |
+                     S3C2412_SLPCON_IN(10)   |
+                     S3C2412_SLPCON_PULL(11) |
+                     S3C2412_SLPCON_PULL(12) |
+                     S3C2412_SLPCON_PULL(13) |
+                     S3C2412_SLPCON_IN(14)   |
+                     S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
+
+        /* Port H sleep */
+
+        __raw_writel(S3C2412_SLPCON_PULL(0) |
+                     S3C2412_SLPCON_PULL(1) |
+                     S3C2412_SLPCON_PULL(2) |
+                     S3C2412_SLPCON_PULL(3) |
+                     S3C2412_SLPCON_PULL(4) |
+                     S3C2412_SLPCON_PULL(5) |
+                     S3C2412_SLPCON_PULL(6) |
+                     S3C2412_SLPCON_IN(7)   |
+                     S3C2412_SLPCON_IN(8)   |
+                     S3C2412_SLPCON_PULL(9) |
+                     S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
+
+        /* initialise the power management now we've setup everything. */
+
+        s3c2410_pm_init();
+
+        s3c_device_nand.dev.platform_data = &jive_nand_info;
+
+        /* initialise the spi */
+
+        s3c2410_gpio_setpin(S3C2410_GPG13, 0);
+        s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+
+        s3c2410_gpio_setpin(S3C2410_GPB7, 1);
+        s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
+
+        s3c2410_gpio_setpin(S3C2410_GPB6, 0);
+        s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
+
+        s3c2410_gpio_setpin(S3C2410_GPG8, 1);
+        s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
+
+        /* initialise the WM8750 spi */
+
+        s3c2410_gpio_setpin(S3C2410_GPH10, 1);
+        s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
+
+        /* Turn off suspend on both USB ports, and switch the
+         * selectable USB port to USB device mode. */
+
+        s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+                              S3C2410_MISCCR_USBSUSPND0 |
+                              S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+        s3c24xx_udc_set_platdata(&jive_udc_cfg);
+        s3c24xx_fb_set_platdata(&jive_lcd_config);
+
+        spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
+
+        s3c_device_i2c.dev.platform_data = &jive_i2c_cfg;
+        i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
+
+        pm_power_off = jive_power_off;
+
+        platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
+}
+
+MACHINE_START(JIVE, "JIVE")
+        /* Maintainer: Ben Dooks <ben@fluff.org> */
+        .phys_io        = S3C2410_PA_UART,
+        .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+
+        .init_irq       = s3c24xx_init_irq,
+        .map_io         = jive_map_io,
+        .init_machine   = jive_machine_init,
+        .timer          = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index f1915bd61d15..25de042ab996 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -29,6 +29,7 @@ config MACH_ANUBIS
         bool "Simtec Electronics ANUBIS"
         select CPU_S3C2440
         select PM_SIMTEC if PM
+        select HAVE_PATA_PLATFORM
         help
           Say Y here if you are using the Simtec Electronics ANUBIS
           development system
@@ -67,6 +68,11 @@ config SMDK2440_CPU2440
         default y if ARCH_S3C2440
         select CPU_S3C2440
 
+config MACH_AT2440EVB
+        bool "Avantech AT2440EVB development board"
+        select CPU_S3C2440
+        help
+          Say Y here if you are using the AT2440EVB development board
 
 endmenu
 
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index c81ed6248dcb..0b4440e79b90 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
 obj-$(CONFIG_MACH_RX3715)       += mach-rx3715.o
 obj-$(CONFIG_ARCH_S3C2440)      += mach-smdk2440.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
+obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 47258915a2f9..09af8b23500b 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-anubis.c
  *
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2005,2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
  *
@@ -17,6 +17,8 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
 
 #include <linux/sm501.h>
 #include <linux/sm501-regs.h>
@@ -241,14 +243,18 @@ static struct s3c2410_platform_nand anubis_nand_info = {
 
 /* IDE channels */
 
+struct pata_platform_info anubis_ide_platdata = {
+        .ioport_shift   = 5,
+};
+
 static struct resource anubis_ide0_resource[] = {
         {
                 .start  = S3C2410_CS3,
                 .end    = S3C2410_CS3 + (8*32) - 1,
                 .flags  = IORESOURCE_MEM,
         }, {
-                .start  = S3C2410_CS3 + (1<<26),
-                .end    = S3C2410_CS3 + (1<<26) + (8*32) - 1,
+                .start  = S3C2410_CS3 + (1<<26) + (6*32),
+                .end    = S3C2410_CS3 + (1<<26) + (7*32) - 1,
                 .flags  = IORESOURCE_MEM,
         }, {
                 .start  = IRQ_IDE0,
@@ -258,10 +264,14 @@ static struct resource anubis_ide0_resource[] = {
 };
 
 static struct platform_device anubis_device_ide0 = {
-        .name           = "simtec-ide",
+        .name           = "pata_platform",
         .id             = 0,
         .num_resources  = ARRAY_SIZE(anubis_ide0_resource),
         .resource       = anubis_ide0_resource,
+        .dev    = {
+                .platform_data = &anubis_ide_platdata,
+                .coherent_dma_mask = ~0,
+        },
 };
 
 static struct resource anubis_ide1_resource[] = {
@@ -270,8 +280,8 @@ static struct resource anubis_ide1_resource[] = {
                 .end    = S3C2410_CS4 + (8*32) - 1,
                 .flags  = IORESOURCE_MEM,
         }, {
-                .start  = S3C2410_CS4 + (1<<26),
-                .end    = S3C2410_CS4 + (1<<26) + (8*32) - 1,
+                .start  = S3C2410_CS4 + (1<<26) + (6*32),
+                .end    = S3C2410_CS4 + (1<<26) + (7*32) - 1,
                 .flags  = IORESOURCE_MEM,
         }, {
                 .start  = IRQ_IDE0,
@@ -280,12 +290,15 @@ static struct resource anubis_ide1_resource[] = {
         },
 };
 
-
 static struct platform_device anubis_device_ide1 = {
-        .name           = "simtec-ide",
+        .name           = "pata_platform",
         .id             = 1,
         .num_resources  = ARRAY_SIZE(anubis_ide1_resource),
         .resource       = anubis_ide1_resource,
+        .dev    = {
+                .platform_data = &anubis_ide_platdata,
+                .coherent_dma_mask = ~0,
+        },
 };
 
 /* Asix AX88796 10/100 ethernet controller */
@@ -409,6 +422,15 @@ static struct clk *anubis_clocks[] = {
         &s3c24xx_uclk,
 };
 
+/* I2C devices. */
+
+static struct i2c_board_info anubis_i2c_devs[] __initdata = {
+        {
+                I2C_BOARD_INFO("tps65011", 0x48),
+                .irq    = IRQ_EINT20,
+        }
+};
+
 static void __init anubis_map_io(void)
 {
         /* initialise the clocks */
@@ -448,6 +470,9 @@ static void __init anubis_map_io(void)
 static void __init anubis_init(void)
 {
         platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
+
+        i2c_register_board_info(0, anubis_i2c_devs,
+                                ARRAY_SIZE(anubis_i2c_devs));
 }
 
 
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
new file mode 100644
index 000000000000..f5e3c7f27639
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -0,0 +1,198 @@
+/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c
+ *
+ * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
+ *      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
+ *      and modifications by SBZ <sbz@spgui.org> and
+ *      Weibing <http://weibing.blogbus.com>
+ *
+ * For product information, visit http://www.arm9e.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/dm9000.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/plat-s3c/nand.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static struct map_desc at2440evb_iodesc[] __initdata = {
+        /* Nothing here */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c24xx_uart_clksrc at2440evb_serial_clocks[] = {
+        [0] = {
+                .name           = "uclk",
+                .divisor        = 1,
+                .min_baud       = 0,
+                .max_baud       = 0,
+        },
+        [1] = {
+                .name           = "pclk",
+                .divisor        = 1,
+                .min_baud       = 0,
+                .max_baud       = 0,
+        }
+};
+
+
+static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
+        [0] = {
+                .hwport      = 0,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+                .clocks      = at2440evb_serial_clocks,
+                .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
+        },
+        [1] = {
+                .hwport      = 1,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+                .clocks      = at2440evb_serial_clocks,
+                .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
+        },
+};
+
+/* NAND Flash on AT2440EVB board */
+
+static struct mtd_partition at2440evb_default_nand_part[] = {
+        [0] = {
+                .name   = "Boot Agent",
+                .size   = SZ_256K,
+                .offset = 0,
+        },
+        [1] = {
+                .name   = "Kernel",
+                .size   = SZ_2M,
+                .offset = SZ_256K,
+        },
+        [2] = {
+                .name   = "Root",
+                .offset = SZ_256K + SZ_2M,
+                .size   = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct s3c2410_nand_set at2440evb_nand_sets[] = {
+        [0] = {
+                .name           = "nand",
+                .nr_chips       = 1,
+                .nr_partitions  = ARRAY_SIZE(at2440evb_default_nand_part),
+                .partitions     = at2440evb_default_nand_part,
+        },
+};
+
+static struct s3c2410_platform_nand at2440evb_nand_info = {
+        .tacls          = 25,
+        .twrph0         = 55,
+        .twrph1         = 40,
+        .nr_sets        = ARRAY_SIZE(at2440evb_nand_sets),
+        .sets           = at2440evb_nand_sets,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource at2440evb_dm9k_resource[] = {
+        [0] = {
+                .start = S3C2410_CS3,
+                .end   = S3C2410_CS3 + 3,
+                .flags = IORESOURCE_MEM
+        },
+        [1] = {
+                .start = S3C2410_CS3 + 4,
+                .end   = S3C2410_CS3 + 7,
+                .flags = IORESOURCE_MEM
+        },
+        [2] = {
+                .start = IRQ_EINT7,
+                .end   = IRQ_EINT7,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+        }
+};
+
+static struct dm9000_plat_data at2440evb_dm9k_pdata = {
+        .flags          = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device at2440evb_device_eth = {
+        .name           = "dm9000",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(at2440evb_dm9k_resource),
+        .resource       = at2440evb_dm9k_resource,
+        .dev            = {
+                .platform_data  = &at2440evb_dm9k_pdata,
+        },
+};
+
+static struct platform_device *at2440evb_devices[] __initdata = {
+        &s3c_device_usb,
+        &s3c_device_wdt,
+        &s3c_device_adc,
+        &s3c_device_i2c,
+        &s3c_device_rtc,
+        &s3c_device_nand,
+        &at2440evb_device_eth,
+};
+
+static void __init at2440evb_map_io(void)
+{
+        s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
+
+        s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
+        s3c24xx_init_clocks(16934400);
+        s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+}
+
+static void __init at2440evb_init(void)
+{
+        platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
+}
+
+
+MACHINE_START(AT2440EVB, "AT2440EVB")
+        .phys_io        = S3C2410_PA_UART,
+        .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .map_io         = at2440evb_map_io,
+        .init_machine   = at2440evb_init,
+        .init_irq       = s3c24xx_init_irq,
+        .timer          = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 8a8acdbd072d..af996b0e91e8 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-osiris.c
  *
- * Copyright (c) 2005 Simtec Electronics
+ * Copyright (c) 2005,2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
  *
@@ -19,6 +19,7 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/clk.h>
+#include <linux/i2c.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -322,6 +323,15 @@ static struct sys_device osiris_pm_sysdev = {
         .cls            = &osiris_pm_sysclass,
 };
 
+/* I2C devices fitted. */
+
+static struct i2c_board_info osiris_i2c_devs[] __initdata = {
+        {
+                I2C_BOARD_INFO("tps65011", 0x48),
+                .irq    = IRQ_EINT20,
+        },
+};
+
 /* Standard Osiris devices */
 
 static struct platform_device *osiris_devices[] __initdata = {
@@ -388,6 +398,9 @@ static void __init osiris_init(void)
         sysdev_class_register(&osiris_pm_sysclass);
         sysdev_register(&osiris_pm_sysdev);
 
+        i2c_register_board_info(0, osiris_i2c_devs,
+                                ARRAY_SIZE(osiris_i2c_devs));
+
         platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
 };
 
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index b42f956738d0..17f064fabdaf 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -81,7 +81,7 @@ static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
         else
                 clkcon &= ~clocks;
 
-        __raw_writel(clkcon, S3C2443_HCLKCON);
+        __raw_writel(clkcon, S3C2443_PCLKCON);
 
         return 0;
 }
@@ -221,7 +221,6 @@ static struct clk clk_mdivclk = {
         .get_rate       = s3c2443_getrate_mdivclk,
 };
 
-
 static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
 {
         unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
@@ -249,6 +248,46 @@ static struct clk clk_msysclk = {
         .set_parent     = s3c2443_setparent_msysclk,
 };
 
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+*/
+
+static struct clk clk_armdiv = {
+        .name           = "armdiv",
+        .id             = -1,
+        .parent         = &clk_msysclk,
+};
+
+/* armclk
+ *
+ * this is the clock fed into the ARM core itself, either from
+ * armdiv or from hclk.
+ */
+
+static int s3c2443_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+        unsigned long clkdiv0;
+
+        clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+
+        if (parent == &clk_armdiv)
+                clkdiv0 &= ~S3C2443_CLKDIV0_DVS;
+        else if (parent == &clk_h)
+                clkdiv0 |= S3C2443_CLKDIV0_DVS;
+        else
+                return -EINVAL;
+
+        __raw_writel(clkdiv0, S3C2443_CLKDIV0);
+        return 0;
+}
+
+static struct clk clk_arm = {
+        .name           = "armclk",
+        .id             = -1,
+        .set_parent     = s3c2443_setparent_armclk,
+};
 
 /* esysclk
  *
@@ -639,6 +678,29 @@ static struct clk clk_display = {
         .round_rate     = s3c2443_roundrate_clksrc256,
 };
 
+/* prediv
+ *
+ * this divides the msysclk down to pass to h/p/etc.
+ */
+
+static unsigned long s3c2443_prediv_getrate(struct clk *clk)
+{
+        unsigned long rate = clk_get_rate(clk->parent);
+        unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+
+        clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
+        clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+
+        return rate / (clkdiv0 + 1);
+}
+
+static struct clk clk_prediv = {
+        .name           = "prediv",
+        .id             = -1,
+        .parent         = &clk_msysclk,
+        .get_rate       = s3c2443_prediv_getrate,
+};
+
 /* standard clock definitions */
 
 static struct clk init_clocks_disable[] = {
@@ -887,6 +949,15 @@ static void __init s3c2443_clk_initparents(void)
         }
 
         clk_init_set_parent(&clk_msysclk, parent);
+
+        /* arm */
+
+        if (__raw_readl(S3C2443_CLKDIV0) & S3C2443_CLKDIV0_DVS)
+                parent = &clk_h;
+        else
+                parent = &clk_armdiv;
+
+        clk_init_set_parent(&clk_arm, parent);
 }
 
 /* armdiv divisor table */
@@ -909,10 +980,9 @@ static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
         return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
 }
 
-static inline unsigned long s3c2443_get_prediv(unsigned long clkcon0)
+static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
 {
-        clkcon0 &= S3C2443_CLKDIV0_PREDIV_MASK;
-        clkcon0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+        clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
 
         return clkcon0 + 1;
 }
@@ -936,6 +1006,9 @@ static struct clk *clks[] __initdata = {
         &clk_hsspi,
         &clk_hsmmc_div,
         &clk_hsmmc,
+        &clk_armdiv,
+        &clk_arm,
+        &clk_prediv,
 };
 
 void __init s3c2443_init_clocks(int xtal)
@@ -951,10 +1024,16 @@ void __init s3c2443_init_clocks(int xtal)
         int ret;
         int ptr;
 
+        /* s3c2443 parents h and p clocks from prediv */
+        clk_h.parent = &clk_prediv;
+        clk_p.parent = &clk_prediv;
+
         pll = s3c2443_get_mpll(mpllcon, xtal);
+        clk_msysclk.rate = pll;
 
         fclk = pll / s3c2443_fclk_div(clkdiv0);
-        hclk = fclk / s3c2443_get_prediv(clkdiv0);
+        hclk = s3c2443_prediv_getrate(&clk_prediv);
+        hclk = hclk / s3c2443_get_hdiv(clkdiv0);
         hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1);
         pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
 
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index fc97fe57ee6f..b5809c51d13f 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -103,7 +103,7 @@ static void clk_gpio27_disable(void)
 }
 
 static struct clk clk_gpio27 = {
-        .name           = "GPIO27_CLK",
+        .name           = "SA1111_CLK",
         .rate           = 3686400,
         .enable         = clk_gpio27_enable,
         .disable        = clk_gpio27_disable,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 33ed048502a3..3a6c8ec34cd9 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -180,8 +180,21 @@ config CPU_ARM925T
 # ARM926T
 config CPU_ARM926T
         bool "Support ARM926T processor"
-        depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
-        default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
+        depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || \
+                MACH_VERSATILE_AB || ARCH_OMAP730 || \
+                ARCH_OMAP16XX || MACH_REALVIEW_EB || \
+                ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
+                ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
+                ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
+                ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
+                ARCH_NS9XXX || ARCH_DAVINCI
+        default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \
+                ARCH_OMAP730 || ARCH_OMAP16XX || \
+                ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
+                ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
+                ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
+                ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
+                ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
         select CPU_32v5
         select CPU_ABRT_EV5TJ
         select CPU_PABRT_NOIFAR
@@ -365,7 +378,7 @@ config CPU_XSC3
 # Feroceon
 config CPU_FEROCEON
         bool
-        depends on ARCH_ORION5X
+        depends on ARCH_ORION5X || ARCH_LOKI || ARCH_KIRKWOOD || ARCH_MV78XX0
         default y
         select CPU_32v5
         select CPU_ABRT_EV5T
@@ -373,7 +386,7 @@ config CPU_FEROCEON
         select CPU_CACHE_VIVT
         select CPU_CP15_MMU
         select CPU_COPY_FEROCEON if MMU
-        select CPU_TLB_V4WBI if MMU
+        select CPU_TLB_FEROCEON if MMU
 
 config CPU_FEROCEON_OLD_ID
         bool "Accept early Feroceon cores with an ARM926 ID"
@@ -551,6 +564,11 @@ config CPU_TLB_V4WBI
           ARM Architecture Version 4 TLB with writeback cache and invalidate
           instruction cache entry.
 
+config CPU_TLB_FEROCEON
+        bool
+        help
+          Feroceon TLB (v4wbi with non-outer-cachable page table walks).
+
 config CPU_TLB_V6
         bool
 
@@ -709,6 +727,14 @@ config OUTER_CACHE
         bool
         default n
 
+config CACHE_FEROCEON_L2
+        bool "Enable the Feroceon L2 cache controller"
+        depends on ARCH_KIRKWOOD || ARCH_MV78XX0
+        default y
+        select OUTER_CACHE
+        help
+          This option enables the Feroceon L2 cache controller.
+
 config CACHE_L2X0
         bool "Enable the L2x0 outer cache controller"
         depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 32b2d2d213a6..2e27a8c8372b 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_CPU_TLB_V3)	+= tlb-v3.o
 obj-$(CONFIG_CPU_TLB_V4WT)      += tlb-v4.o
 obj-$(CONFIG_CPU_TLB_V4WB)      += tlb-v4wb.o
 obj-$(CONFIG_CPU_TLB_V4WBI)     += tlb-v4wbi.o
+obj-$(CONFIG_CPU_TLB_FEROCEON)  += tlb-v4wbi.o  # reuse v4wbi TLB functions
 obj-$(CONFIG_CPU_TLB_V6)        += tlb-v6.o
 obj-$(CONFIG_CPU_TLB_V7)        += tlb-v7.o
 
@@ -73,4 +74,7 @@ obj-$(CONFIG_CPU_FEROCEON)	+= proc-feroceon.o
 obj-$(CONFIG_CPU_V6)            += proc-v6.o
 obj-$(CONFIG_CPU_V7)            += proc-v7.o
 
+obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)        += cache-l2x0.o
+obj-$(CONFIG_CACHE_XSC3L2)      += cache-xsc3l2.o
+
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
new file mode 100644
index 000000000000..20eec4ba173f
--- /dev/null
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -0,0 +1,318 @@
+/*
+ * arch/arm/mm/cache-feroceon-l2.c - Feroceon L2 cache controller support
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * References:
+ * - Unified Layer 2 Cache for Feroceon CPU Cores,
+ *   Document ID MV-S104858-00, Rev. A, October 23 2007.
+ */
+
+#include <linux/init.h>
+#include <asm/cacheflush.h>
+#include <asm/plat-orion/cache-feroceon-l2.h>
+
+
+/*
+ * Low-level cache maintenance operations.
+ *
+ * As well as the regular 'clean/invalidate/flush L2 cache line by
+ * MVA' instructions, the Feroceon L2 cache controller also features
+ * 'clean/invalidate L2 range by MVA' operations.
+ *
+ * Cache range operations are initiated by writing the start and
+ * end addresses to successive cp15 registers, and process every
+ * cache line whose first byte address lies in the inclusive range
+ * [start:end].
+ *
+ * The cache range operations stall the CPU pipeline until completion.
+ *
+ * The range operations require two successive cp15 writes, in
+ * between which we don't want to be preempted.
+ */
+static inline void l2_clean_pa(unsigned long addr)
+{
+        __asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
+}
+
+static inline void l2_clean_mva_range(unsigned long start, unsigned long end)
+{
+        unsigned long flags;
+
+        /*
+         * Make sure 'start' and 'end' reference the same page, as
+         * L2 is PIPT and range operations only do a TLB lookup on
+         * the start address.
+         */
+        BUG_ON((start ^ end) & ~(PAGE_SIZE - 1));
+
+        raw_local_irq_save(flags);
+        __asm__("mcr p15, 1, %0, c15, c9, 4" : : "r" (start));
+        __asm__("mcr p15, 1, %0, c15, c9, 5" : : "r" (end));
+        raw_local_irq_restore(flags);
+}
+
+static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
+{
+        l2_clean_mva_range(__phys_to_virt(start), __phys_to_virt(end));
+}
+
+static inline void l2_clean_inv_pa(unsigned long addr)
+{
+        __asm__("mcr p15, 1, %0, c15, c10, 3" : : "r" (addr));
+}
+
+static inline void l2_inv_pa(unsigned long addr)
+{
+        __asm__("mcr p15, 1, %0, c15, c11, 3" : : "r" (addr));
+}
+
+static inline void l2_inv_mva_range(unsigned long start, unsigned long end)
+{
+        unsigned long flags;
+
+        /*
+         * Make sure 'start' and 'end' reference the same page, as
+         * L2 is PIPT and range operations only do a TLB lookup on
+         * the start address.
+         */
+        BUG_ON((start ^ end) & ~(PAGE_SIZE - 1));
+
+        raw_local_irq_save(flags);
+        __asm__("mcr p15, 1, %0, c15, c11, 4" : : "r" (start));
+        __asm__("mcr p15, 1, %0, c15, c11, 5" : : "r" (end));
+        raw_local_irq_restore(flags);
+}
+
+static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
+{
+        l2_inv_mva_range(__phys_to_virt(start), __phys_to_virt(end));
+}
+
+
+/*
+ * Linux primitives.
+ *
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive, while the hardware cache range operations use
+ * inclusive start and end addresses.
+ */
+#define CACHE_LINE_SIZE         32
+#define MAX_RANGE_SIZE          1024
+
+static int l2_wt_override;
+
+static unsigned long calc_range_end(unsigned long start, unsigned long end)
+{
+        unsigned long range_end;
+
+        BUG_ON(start & (CACHE_LINE_SIZE - 1));
+        BUG_ON(end & (CACHE_LINE_SIZE - 1));
+
+        /*
+         * Try to process all cache lines between 'start' and 'end'.
+         */
+        range_end = end;
+
+        /*
+         * Limit the number of cache lines processed at once,
+         * since cache range operations stall the CPU pipeline
+         * until completion.
+         */
+        if (range_end > start + MAX_RANGE_SIZE)
+                range_end = start + MAX_RANGE_SIZE;
+
+        /*
+         * Cache range operations can't straddle a page boundary.
+         */
+        if (range_end > (start | (PAGE_SIZE - 1)) + 1)
+                range_end = (start | (PAGE_SIZE - 1)) + 1;
+
+        return range_end;
+}
+
+static void feroceon_l2_inv_range(unsigned long start, unsigned long end)
+{
+        /*
+         * Clean and invalidate partial first cache line.
+         */
+        if (start & (CACHE_LINE_SIZE - 1)) {
+                l2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+                start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+        }
+
+        /*
+         * Clean and invalidate partial last cache line.
+         */
+        if (end & (CACHE_LINE_SIZE - 1)) {
+                l2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+                end &= ~(CACHE_LINE_SIZE - 1);
+        }
+
+        /*
+         * Invalidate all full cache lines between 'start' and 'end'.
+         */
+        while (start != end) {
+                unsigned long range_end = calc_range_end(start, end);
+                l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE);
+                start = range_end;
+        }
+
+        dsb();
+}
+
+static void feroceon_l2_clean_range(unsigned long start, unsigned long end)
+{
+        /*
+         * If L2 is forced to WT, the L2 will always be clean and we
+         * don't need to do anything here.
+         */
+        if (!l2_wt_override) {
+                start &= ~(CACHE_LINE_SIZE - 1);
+                end = (end + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
+                while (start != end) {
+                        unsigned long range_end = calc_range_end(start, end);
+                        l2_clean_pa_range(start, range_end - CACHE_LINE_SIZE);
+                        start = range_end;
+                }
+        }
+
+        dsb();
+}
+
+static void feroceon_l2_flush_range(unsigned long start, unsigned long end)
+{
+        start &= ~(CACHE_LINE_SIZE - 1);
+        end = (end + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
+        while (start != end) {
+                unsigned long range_end = calc_range_end(start, end);
+                if (!l2_wt_override)
+                        l2_clean_pa_range(start, range_end - CACHE_LINE_SIZE);
+                l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE);
+                start = range_end;
+        }
+
+        dsb();
+}
+
+
+/*
+ * Routines to disable and re-enable the D-cache and I-cache at run
+ * time.  These are necessary because the L2 cache can only be enabled
+ * or disabled while the L1 Dcache and Icache are both disabled.
+ */
+static void __init invalidate_and_disable_dcache(void)
+{
+        u32 cr;
+
+        cr = get_cr();
+        if (cr & CR_C) {
+                unsigned long flags;
+
+                raw_local_irq_save(flags);
+                flush_cache_all();
+                set_cr(cr & ~CR_C);
+                raw_local_irq_restore(flags);
+        }
+}
+
+static void __init enable_dcache(void)
+{
+        u32 cr;
+
+        cr = get_cr();
+        if (!(cr & CR_C))
+                set_cr(cr | CR_C);
+}
+
+static void __init __invalidate_icache(void)
+{
+        int dummy;
+
+        __asm__ __volatile__("mcr p15, 0, %0, c7, c5, 0\n" : "=r" (dummy));
+}
+
+static void __init invalidate_and_disable_icache(void)
+{
+        u32 cr;
+
+        cr = get_cr();
+        if (cr & CR_I) {
+                set_cr(cr & ~CR_I);
+                __invalidate_icache();
+        }
+}
+
+static void __init enable_icache(void)
+{
+        u32 cr;
+
+        cr = get_cr();
+        if (!(cr & CR_I))
+                set_cr(cr | CR_I);
+}
+
+static inline u32 read_extra_features(void)
+{
+        u32 u;
+
+        __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
+
+        return u;
+}
+
+static inline void write_extra_features(u32 u)
+{
+        __asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
+}
+
+static void __init disable_l2_prefetch(void)
+{
+        u32 u;
+
+        /*
+         * Read the CPU Extra Features register and verify that the
+         * Disable L2 Prefetch bit is set.
+         */
+        u = read_extra_features();
+        if (!(u & 0x01000000)) {
+                printk(KERN_INFO "Feroceon L2: Disabling L2 prefetch.\n");
+                write_extra_features(u | 0x01000000);
+        }
+}
+
+static void __init enable_l2(void)
+{
+        u32 u;
+
+        u = read_extra_features();
+        if (!(u & 0x00400000)) {
+                printk(KERN_INFO "Feroceon L2: Enabling L2\n");
+
+                invalidate_and_disable_dcache();
+                invalidate_and_disable_icache();
+                write_extra_features(u | 0x00400000);
+                enable_icache();
+                enable_dcache();
+        }
+}
+
+void __init feroceon_l2_init(int __l2_wt_override)
+{
+        l2_wt_override = __l2_wt_override;
+
+        disable_l2_prefetch();
+
+        outer_cache.inv_range = feroceon_l2_inv_range;
+        outer_cache.clean_range = feroceon_l2_clean_range;
+        outer_cache.flush_range = feroceon_l2_flush_range;
+
+        enable_l2();
+
+        printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n",
+                         l2_wt_override ? ", in WT override mode" : "");
+}
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 44558d5f9313..fbfa26058442 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -144,13 +144,17 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
         page = pfn_to_page(pfn);
         mapping = page_mapping(page);
         if (mapping) {
+#ifndef CONFIG_SMP
                 int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
 
                 if (dirty)
                         __flush_dcache_page(mapping, page);
+#endif
 
                 if (cache_is_vivt())
                         make_coherent(mapping, vma, addr, pfn);
+                else if (vma->vm_flags & VM_EXEC)
+                        __flush_icache_all();
         }
 }
 
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 9df507d36e0b..029ee65fda2b 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -199,6 +199,8 @@ void flush_dcache_page(struct page *page)
                 __flush_dcache_page(mapping, page);
                 if (mapping && cache_is_vivt())
                         __flush_dcache_aliases(mapping, page);
+                else if (mapping)
+                        __flush_icache_all();
         }
 }
 EXPORT_SYMBOL(flush_dcache_page);
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index a02c1712b52d..f2e5884c513a 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -44,11 +44,31 @@
  */
 #define CACHE_DLINESIZE 32
 
+        .bss
+        .align 3
+__cache_params_loc:
+        .space  8
+
         .text
+__cache_params:
+        .word   __cache_params_loc
+
 /*
  * cpu_feroceon_proc_init()
  */
 ENTRY(cpu_feroceon_proc_init)
+        mrc     p15, 0, r0, c0, c0, 1           @ read cache type register
+        ldr     r1, __cache_params
+        mov     r2, #(16 << 5)
+        tst     r0, #(1 << 16)                  @ get way
+        mov     r0, r0, lsr #18                 @ get cache size order
+        movne   r3, #((4 - 1) << 30)            @ 4-way
+        and     r0, r0, #0xf
+        moveq   r3, #0                          @ 1-way
+        mov     r2, r2, lsl r0                  @ actual cache size
+        movne   r2, r2, lsr #2                  @ turned into # of sets
+        sub     r2, r2, #(1 << 5)
+        stmia   r1, {r2, r3}
         mov     pc, lr
 
 /*
@@ -59,6 +79,13 @@ ENTRY(cpu_feroceon_proc_fin)
         mov     ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
         msr     cpsr_c, ip
         bl      feroceon_flush_kern_cache_all
+
+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+        mov     r0, #0
+        mcr     p15, 1, r0, c15, c9, 0          @ clean L2
+        mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+#endif
+
         mrc     p15, 0, r0, c1, c0, 0           @ ctrl register
         bic     r0, r0, #0x1000                 @ ...i............
         bic     r0, r0, #0x000e                 @ ............wca.
@@ -117,11 +144,19 @@ ENTRY(feroceon_flush_user_cache_all)
  */
 ENTRY(feroceon_flush_kern_cache_all)
         mov     r2, #VM_EXEC
-        mov     ip, #0
+
 __flush_whole_cache:
-1:      mrc     p15, 0, r15, c7, c14, 3         @ test,clean,invalidate
-        bne     1b
+        ldr     r1, __cache_params
+        ldmia   r1, {r1, r3}
+1:      orr     ip, r1, r3
+2:      mcr     p15, 0, ip, c7, c14, 2          @ clean + invalidate D set/way
+        subs    ip, ip, #(1 << 30)              @ next way
+        bcs     2b
+        subs    r1, r1, #(1 << 5)               @ next set
+        bcs     1b
+
         tst     r2, #VM_EXEC
+        mov     ip, #0
         mcrne   p15, 0, ip, c7, c5, 0           @ invalidate I cache
         mcrne   p15, 0, ip, c7, c10, 4          @ drain WB
         mov     pc, lr
@@ -138,7 +173,6 @@ __flush_whole_cache:
  */
         .align  5
 ENTRY(feroceon_flush_user_cache_range)
-        mov     ip, #0
         sub     r3, r1, r0                      @ calculate total size
         cmp     r3, #CACHE_DLIMIT
         bgt     __flush_whole_cache
@@ -152,6 +186,7 @@ ENTRY(feroceon_flush_user_cache_range)
         cmp     r0, r1
         blo     1b
         tst     r2, #VM_EXEC
+        mov     ip, #0
         mcrne   p15, 0, ip, c7, c10, 4          @ drain WB
         mov     pc, lr
 
@@ -209,6 +244,20 @@ ENTRY(feroceon_flush_kern_dcache_page)
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
         mov     pc, lr
 
+        .align  5
+ENTRY(feroceon_range_flush_kern_dcache_page)
+        mrs     r2, cpsr
+        add     r1, r0, #PAGE_SZ - CACHE_DLINESIZE      @ top addr is inclusive
+        orr     r3, r2, #PSR_I_BIT
+        msr     cpsr_c, r3                      @ disable interrupts
+        mcr     p15, 5, r0, c15, c15, 0         @ D clean/inv range start
+        mcr     p15, 5, r1, c15, c15, 1         @ D clean/inv range top
+        msr     cpsr_c, r2                      @ restore interrupts
+        mov     r0, #0
+        mcr     p15, 0, r0, c7, c5, 0           @ invalidate I cache
+        mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+        mov     pc, lr
+
 /*
  *      dma_inv_range(start, end)
  *
@@ -225,10 +274,10 @@ ENTRY(feroceon_flush_kern_dcache_page)
         .align  5
 ENTRY(feroceon_dma_inv_range)
         tst     r0, #CACHE_DLINESIZE - 1
+        bic     r0, r0, #CACHE_DLINESIZE - 1
         mcrne   p15, 0, r0, c7, c10, 1          @ clean D entry
         tst     r1, #CACHE_DLINESIZE - 1
         mcrne   p15, 0, r1, c7, c10, 1          @ clean D entry
-        bic     r0, r0, #CACHE_DLINESIZE - 1
 1:      mcr     p15, 0, r0, c7, c6, 1           @ invalidate D entry
         add     r0, r0, #CACHE_DLINESIZE
         cmp     r0, r1
@@ -236,6 +285,22 @@ ENTRY(feroceon_dma_inv_range)
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
         mov     pc, lr
 
+        .align  5
+ENTRY(feroceon_range_dma_inv_range)
+        mrs     r2, cpsr
+        tst     r0, #CACHE_DLINESIZE - 1
+        mcrne   p15, 0, r0, c7, c10, 1          @ clean D entry
+        tst     r1, #CACHE_DLINESIZE - 1
+        mcrne   p15, 0, r1, c7, c10, 1          @ clean D entry
+        cmp     r1, r0
+        subne   r1, r1, #1                      @ top address is inclusive
+        orr     r3, r2, #PSR_I_BIT
+        msr     cpsr_c, r3                      @ disable interrupts
+        mcr     p15, 5, r0, c15, c14, 0         @ D inv range start
+        mcr     p15, 5, r1, c15, c14, 1         @ D inv range top
+        msr     cpsr_c, r2                      @ restore interrupts
+        mov     pc, lr
+
 /*
  *      dma_clean_range(start, end)
  *
@@ -256,6 +321,19 @@ ENTRY(feroceon_dma_clean_range)
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
         mov     pc, lr
 
+        .align  5
+ENTRY(feroceon_range_dma_clean_range)
+        mrs     r2, cpsr
+        cmp     r1, r0
+        subne   r1, r1, #1                      @ top address is inclusive
+        orr     r3, r2, #PSR_I_BIT
+        msr     cpsr_c, r3                      @ disable interrupts
+        mcr     p15, 5, r0, c15, c13, 0         @ D clean range start
+        mcr     p15, 5, r1, c15, c13, 1         @ D clean range top
+        msr     cpsr_c, r2                      @ restore interrupts
+        mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+        mov     pc, lr
+
 /*
  *      dma_flush_range(start, end)
  *
@@ -274,6 +352,19 @@ ENTRY(feroceon_dma_flush_range)
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
         mov     pc, lr
 
+        .align  5
+ENTRY(feroceon_range_dma_flush_range)
+        mrs     r2, cpsr
+        cmp     r1, r0
+        subne   r1, r1, #1                      @ top address is inclusive
+        orr     r3, r2, #PSR_I_BIT
+        msr     cpsr_c, r3                      @ disable interrupts
+        mcr     p15, 5, r0, c15, c15, 0         @ D clean/inv range start
+        mcr     p15, 5, r1, c15, c15, 1         @ D clean/inv range top
+        msr     cpsr_c, r2                      @ restore interrupts
+        mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+        mov     pc, lr
+
 ENTRY(feroceon_cache_fns)
         .long   feroceon_flush_kern_cache_all
         .long   feroceon_flush_user_cache_all
@@ -285,12 +376,33 @@ ENTRY(feroceon_cache_fns)
         .long   feroceon_dma_clean_range
         .long   feroceon_dma_flush_range
 
+ENTRY(feroceon_range_cache_fns)
+        .long   feroceon_flush_kern_cache_all
+        .long   feroceon_flush_user_cache_all
+        .long   feroceon_flush_user_cache_range
+        .long   feroceon_coherent_kern_range
+        .long   feroceon_coherent_user_range
+        .long   feroceon_range_flush_kern_dcache_page
+        .long   feroceon_range_dma_inv_range
+        .long   feroceon_range_dma_clean_range
+        .long   feroceon_range_dma_flush_range
+
         .align  5
 ENTRY(cpu_feroceon_dcache_clean_area)
+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+        mov     r2, r0
+        mov     r3, r1
+#endif
 1:      mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
         add     r0, r0, #CACHE_DLINESIZE
         subs    r1, r1, #CACHE_DLINESIZE
         bhi     1b
+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+1:      mcr     p15, 1, r2, c15, c9, 1          @ clean L2 entry
+        add     r2, r2, #CACHE_DLINESIZE
+        subs    r3, r3, #CACHE_DLINESIZE
+        bhi     1b
+#endif
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
         mov     pc, lr
 
@@ -306,16 +418,25 @@ ENTRY(cpu_feroceon_dcache_clean_area)
         .align  5
 ENTRY(cpu_feroceon_switch_mm)
 #ifdef CONFIG_MMU
-        mov     ip, #0
-@ && 'Clean & Invalidate whole DCache'
-1:      mrc     p15, 0, r15, c7, c14, 3         @ test,clean,invalidate
-        bne     1b
-        mcr     p15, 0, ip, c7, c5, 0           @ invalidate I cache
-        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        /*
+         * Note: we wish to call __flush_whole_cache but we need to preserve
+         * lr to do so.  The only way without touching main memory is to
+         * use r2 which is normally used to test the VM_EXEC flag, and
+         * compensate locally for the skipped ops if it is not set.
+         */
+        mov     r2, lr                          @ abuse r2 to preserve lr
+        bl      __flush_whole_cache
+        @ if r2 contains the VM_EXEC bit then the next 2 ops are done already
+        tst     r2, #VM_EXEC
+        mcreq   p15, 0, ip, c7, c5, 0           @ invalidate I cache
+        mcreq   p15, 0, ip, c7, c10, 4          @ drain WB
+
         mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
-#endif
+        mov     pc, r2
+#else
         mov     pc, lr
+#endif
 
 /*
  * cpu_feroceon_set_pte_ext(ptep, pte, ext)
@@ -345,6 +466,9 @@ ENTRY(cpu_feroceon_set_pte_ext)
         str     r2, [r0]                        @ hardware version
         mov     r0, r0
         mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
+#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+        mcr     p15, 1, r0, c15, c9, 1          @ clean L2 entry
+#endif
         mcr     p15, 0, r0, c7, c10, 4          @ drain WB
 #endif
         mov     pc, lr
@@ -369,14 +493,15 @@ __feroceon_setup:
         .size   __feroceon_setup, . - __feroceon_setup
 
         /*
-         *  R
-         * .RVI ZFRS BLDP WCAM
-         * .011 0001 ..11 0101
+         *      B
+         *  R   P
+         * .RVI UFRS BLDP WCAM
+         * .011 .001 ..11 0101
          *
          */
         .type   feroceon_crval, #object
 feroceon_crval:
-        crval   clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134
+        crval   clear=0x0000773f, mmuset=0x00003135, ucset=0x00001134
 
         __INITDATA
 
@@ -414,6 +539,21 @@ cpu_feroceon_name:
         .asciz  "Feroceon"
         .size   cpu_feroceon_name, . - cpu_feroceon_name
 
+        .type   cpu_88fr531_name, #object
+cpu_88fr531_name:
+        .asciz  "Feroceon 88FR531-vd"
+        .size   cpu_88fr531_name, . - cpu_88fr531_name
+
+        .type   cpu_88fr571_name, #object
+cpu_88fr571_name:
+        .asciz  "Feroceon 88FR571-vd"
+        .size   cpu_88fr571_name, . - cpu_88fr571_name
+
+        .type   cpu_88fr131_name, #object
+cpu_88fr131_name:
+        .asciz  "Feroceon 88FR131"
+        .size   cpu_88fr131_name, . - cpu_88fr131_name
+
         .align
 
         .section ".proc.info.init", #alloc, #execinstr
@@ -421,15 +561,15 @@ cpu_feroceon_name:
 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
         .type   __feroceon_old_id_proc_info,#object
 __feroceon_old_id_proc_info:
-        .long   0x41069260
-        .long   0xfffffff0
-        .long   PMD_TYPE_SECT | \
+        .long   0x41009260
+        .long   0xff00fff0
+        .long   PMD_TYPE_SECT | \
                 PMD_SECT_BUFFERABLE | \
                 PMD_SECT_CACHEABLE | \
                 PMD_BIT4 | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
-        .long   PMD_TYPE_SECT | \
+        .long   PMD_TYPE_SECT | \
                 PMD_BIT4 | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
@@ -445,17 +585,17 @@ __feroceon_old_id_proc_info:
         .size   __feroceon_old_id_proc_info, . - __feroceon_old_id_proc_info
 #endif
 
-        .type   __feroceon_proc_info,#object
-__feroceon_proc_info:
+        .type   __88fr531_proc_info,#object
+__88fr531_proc_info:
         .long   0x56055310
         .long   0xfffffff0
-        .long   PMD_TYPE_SECT | \
+        .long   PMD_TYPE_SECT | \
                 PMD_SECT_BUFFERABLE | \
                 PMD_SECT_CACHEABLE | \
                 PMD_BIT4 | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
-        .long   PMD_TYPE_SECT | \
+        .long   PMD_TYPE_SECT | \
                 PMD_BIT4 | \
                 PMD_SECT_AP_WRITE | \
                 PMD_SECT_AP_READ
@@ -463,9 +603,59 @@ __feroceon_proc_info:
         .long   cpu_arch_name
         .long   cpu_elf_name
         .long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
-        .long   cpu_feroceon_name
+        .long   cpu_88fr531_name
         .long   feroceon_processor_functions
         .long   v4wbi_tlb_fns
         .long   feroceon_user_fns
         .long   feroceon_cache_fns
-        .size   __feroceon_proc_info, . - __feroceon_proc_info
+        .size   __88fr531_proc_info, . - __88fr531_proc_info
+
+        .type   __88fr571_proc_info,#object
+__88fr571_proc_info:
+        .long   0x56155710
+        .long   0xfffffff0
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_BUFFERABLE | \
+                PMD_SECT_CACHEABLE | \
+                PMD_BIT4 | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_BIT4 | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
+        b       __feroceon_setup
+        .long   cpu_arch_name
+        .long   cpu_elf_name
+        .long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+        .long   cpu_88fr571_name
+        .long   feroceon_processor_functions
+        .long   v4wbi_tlb_fns
+        .long   feroceon_user_fns
+        .long   feroceon_range_cache_fns
+        .size   __88fr571_proc_info, . - __88fr571_proc_info
+
+        .type   __88fr131_proc_info,#object
+__88fr131_proc_info:
+        .long   0x56251310
+        .long   0xfffffff0
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_BUFFERABLE | \
+                PMD_SECT_CACHEABLE | \
+                PMD_BIT4 | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
+        .long   PMD_TYPE_SECT | \
+                PMD_BIT4 | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
+        b       __feroceon_setup
+        .long   cpu_arch_name
+        .long   cpu_elf_name
+        .long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+        .long   cpu_88fr131_name
+        .long   feroceon_processor_functions
+        .long   v4wbi_tlb_fns
+        .long   feroceon_user_fns
+        .long   feroceon_range_cache_fns
+        .size   __88fr131_proc_info, . - __88fr131_proc_info
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 74fae6045650..4458705021e0 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -201,7 +201,7 @@ static int em_call_function(int (*fn)(void))
         data.ret = 0;
 
         preempt_disable();
-        smp_call_function(em_func, &data, 1, 1);
+        smp_call_function(em_func, &data, 1);
         em_func(&data);
         preempt_enable();
 
diff --git a/arch/arm/plat-iop/gpio.c b/arch/arm/plat-iop/gpio.c
index eda436083417..640e498c12ef 100644
--- a/arch/arm/plat-iop/gpio.c
+++ b/arch/arm/plat-iop/gpio.c
@@ -11,6 +11,10 @@
  */
 
 #include <linux/device.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
 #include <asm/hardware/iop3xx.h>
 
 void gpio_line_config(int line, int direction)
@@ -46,3 +50,42 @@ void gpio_line_set(int line, int value)
         local_irq_restore(flags);
 }
 EXPORT_SYMBOL(gpio_line_set);
+
+static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+        gpio_line_config(gpio, GPIO_IN);
+        return 0;
+}
+
+static int iop3xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
+{
+        gpio_line_set(gpio, level);
+        gpio_line_config(gpio, GPIO_OUT);
+        return 0;
+}
+
+static int iop3xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+        return gpio_line_get(gpio);
+}
+
+static void iop3xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+        gpio_line_set(gpio, value);
+}
+
+static struct gpio_chip iop3xx_chip = {
+        .label                  = "iop3xx",
+        .direction_input        = iop3xx_gpio_direction_input,
+        .get                    = iop3xx_gpio_get_value,
+        .direction_output       = iop3xx_gpio_direction_output,
+        .set                    = iop3xx_gpio_set_value,
+        .base                   = 0,
+        .ngpio                  = IOP3XX_N_GPIOS,
+};
+
+static int __init iop3xx_gpio_setup(void)
+{
+        return gpiochip_add(&iop3xx_chip);
+}
+arch_initcall(iop3xx_gpio_setup);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index bb6e12738fb3..e14eaad11dd5 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -3,9 +3,14 @@ if ARCH_MXC
 menu "Freescale MXC Implementations"
 
 choice
-        prompt "MXC/iMX System Type"
+        prompt "MXC/iMX Base Type"
         default ARCH_MX3
 
+config ARCH_MX2
+        bool "MX2-based"
+        help
+          This enables support for systems based on the Freescale i.MX2 family
+
 config ARCH_MX3
         bool "MX3-based"
         help
@@ -13,6 +18,7 @@ config ARCH_MX3
 
 endchoice
 
+source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 
 endmenu
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index f96dc0362068..db66e9ae8414 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,4 +3,6 @@
 #
 
 # Common support
-obj-y := irq.o
+obj-y := irq.o clock.o gpio.o time.o
+
+obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
new file mode 100644
index 000000000000..1aa86fd60d71
--- /dev/null
+++ b/arch/arm/plat-mxc/clock.c
@@ -0,0 +1,331 @@
+/*
+ * Based on arch/arm/plat-omap/clock.c
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+/* #define DEBUG */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/proc_fs.h>
+#include <linux/semaphore.h>
+#include <linux/string.h>
+#include <linux/version.h>
+
+#include <asm/arch/clock.h>
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+/*-------------------------------------------------------------------------
+ * Standard clock functions defined in include/linux/clk.h
+ *-------------------------------------------------------------------------*/
+
+/*
+ * Retrieve a clock by name.
+ *
+ * Note that we first try to use device id on the bus
+ * and clock name. If this fails, we try to use "<name>.<id>". If this fails,
+ * we try to use clock name only.
+ * The reference count to the clock's module owner ref count is incremented.
+ */
+struct clk *clk_get(struct device *dev, const char *id)
+{
+        struct clk *p, *clk = ERR_PTR(-ENOENT);
+        int idno;
+        const char *str;
+
+        if (id == NULL)
+                return clk;
+
+        if (dev == NULL || dev->bus != &platform_bus_type)
+                idno = -1;
+        else
+                idno = to_platform_device(dev)->id;
+
+        mutex_lock(&clocks_mutex);
+
+        list_for_each_entry(p, &clocks, node) {
+                if (p->id == idno &&
+                    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+                        clk = p;
+                        goto found;
+                }
+        }
+
+        str = strrchr(id, '.');
+        if (str) {
+                int cnt = str - id;
+                str++;
+                idno = simple_strtol(str, NULL, 10);
+                list_for_each_entry(p, &clocks, node) {
+                        if (p->id == idno &&
+                            strlen(p->name) == cnt &&
+                            strncmp(id, p->name, cnt) == 0 &&
+                            try_module_get(p->owner)) {
+                                clk = p;
+                                goto found;
+                        }
+                }
+        }
+
+        list_for_each_entry(p, &clocks, node) {
+                if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+                        clk = p;
+                        goto found;
+                }
+        }
+
+        printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id);
+
+found:
+        mutex_unlock(&clocks_mutex);
+
+        return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+static void __clk_disable(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return;
+
+        __clk_disable(clk->parent);
+        __clk_disable(clk->secondary);
+
+        if (!(--clk->usecount) && clk->disable)
+                clk->disable(clk);
+}
+
+static int __clk_enable(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return -EINVAL;
+
+        __clk_enable(clk->parent);
+        __clk_enable(clk->secondary);
+
+        if (clk->usecount++ == 0 && clk->enable)
+                clk->enable(clk);
+
+        return 0;
+}
+
+/* This function increments the reference count on the clock and enables the
+ * clock if not already enabled. The parent clock tree is recursively enabled
+ */
+int clk_enable(struct clk *clk)
+{
+        int ret = 0;
+
+        if (clk == NULL || IS_ERR(clk))
+                return -EINVAL;
+
+        mutex_lock(&clocks_mutex);
+        ret = __clk_enable(clk);
+        mutex_unlock(&clocks_mutex);
+
+        return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/* This function decrements the reference count on the clock and disables
+ * the clock when reference count is 0. The parent clock tree is
+ * recursively disabled
+ */
+void clk_disable(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return;
+
+        mutex_lock(&clocks_mutex);
+        __clk_disable(clk);
+        mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Retrieve the *current* clock rate. If the clock itself
+ * does not provide a special calculation routine, ask
+ * its parent and so on, until one is able to return
+ * a valid clock rate
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return 0UL;
+
+        if (clk->get_rate)
+                return clk->get_rate(clk);
+
+        return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* Decrement the clock's module reference count */
+void clk_put(struct clk *clk)
+{
+        if (clk && !IS_ERR(clk))
+                module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+/* Round the requested clock rate to the nearest supported
+ * rate that is less than or equal to the requested rate.
+ * This is dependent on the clock's current parent.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+        if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
+                return 0;
+
+        return clk->round_rate(clk, rate);
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+/* Set the clock to the requested clock rate. The rate must
+ * match a supported rate exactly based on what clk_round_rate returns
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+        int ret = -EINVAL;
+
+        if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
+                return ret;
+
+        mutex_lock(&clocks_mutex);
+        ret = clk->set_rate(clk, rate);
+        mutex_unlock(&clocks_mutex);
+
+        return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/* Set the clock's parent to another clock source */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+        int ret = -EINVAL;
+
+        if (clk == NULL || IS_ERR(clk) || parent == NULL ||
+            IS_ERR(parent) || clk->set_parent == NULL)
+                return ret;
+
+        mutex_lock(&clocks_mutex);
+        ret = clk->set_parent(clk, parent);
+        if (ret == 0)
+                clk->parent = parent;
+        mutex_unlock(&clocks_mutex);
+
+        return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/* Retrieve the clock's parent clock source */
+struct clk *clk_get_parent(struct clk *clk)
+{
+        struct clk *ret = NULL;
+
+        if (clk == NULL || IS_ERR(clk))
+                return ret;
+
+        return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * Add a new clock to the clock tree.
+ */
+int clk_register(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return -EINVAL;
+
+        mutex_lock(&clocks_mutex);
+        list_add(&clk->node, &clocks);
+        mutex_unlock(&clocks_mutex);
+
+        return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+/* Remove a clock from the clock tree */
+void clk_unregister(struct clk *clk)
+{
+        if (clk == NULL || IS_ERR(clk))
+                return;
+
+        mutex_lock(&clocks_mutex);
+        list_del(&clk->node);
+        mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+#ifdef CONFIG_PROC_FS
+static int mxc_clock_read_proc(char *page, char **start, off_t off,
+                                int count, int *eof, void *data)
+{
+        struct clk *clkp;
+        char *p = page;
+        int len;
+
+        list_for_each_entry(clkp, &clocks, node) {
+                p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id,
+                                clk_get_rate(clkp), clkp->usecount);
+                if (clkp->parent)
+                        p += sprintf(p, ", %s-%d\n", clkp->parent->name,
+                                     clkp->parent->id);
+                else
+                        p += sprintf(p, "\n");
+        }
+
+        len = (p - page) - off;
+        if (len < 0)
+                len = 0;
+
+        *eof = (len <= count) ? 1 : 0;
+        *start = page + off;
+
+        return len;
+}
+
+static int __init mxc_setup_proc_entry(void)
+{
+        struct proc_dir_entry *res;
+
+        res = create_proc_read_entry("cpu/clocks", 0, NULL,
+                                     mxc_clock_read_proc, NULL);
+        if (!res) {
+                printk(KERN_ERR "Failed to create proc/cpu/clocks\n");
+                return -ENOMEM;
+        }
+        return 0;
+}
+
+late_initcall(mxc_setup_proc_entry);
+#endif
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
new file mode 100644
index 000000000000..4a7736717d86
--- /dev/null
+++ b/arch/arm/plat-mxc/gpio.c
@@ -0,0 +1,253 @@
+/*
+ * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * Based on code from Freescale,
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <asm/hardware.h>
+#include <asm-generic/bug.h>
+
+static struct mxc_gpio_port *mxc_gpio_ports;
+static int gpio_table_size;
+
+/* Note: This driver assumes 32 GPIOs are handled in one register */
+
+static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
+{
+        __raw_writel(1 << index, port->base + GPIO_ISR);
+}
+
+static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
+                                int enable)
+{
+        u32 l;
+
+        l = __raw_readl(port->base + GPIO_IMR);
+        l = (l & (~(1 << index))) | (!!enable << index);
+        __raw_writel(l, port->base + GPIO_IMR);
+}
+
+static void gpio_ack_irq(u32 irq)
+{
+        u32 gpio = irq_to_gpio(irq);
+        _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
+}
+
+static void gpio_mask_irq(u32 irq)
+{
+        u32 gpio = irq_to_gpio(irq);
+        _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
+}
+
+static void gpio_unmask_irq(u32 irq)
+{
+        u32 gpio = irq_to_gpio(irq);
+        _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
+}
+
+static int gpio_set_irq_type(u32 irq, u32 type)
+{
+        u32 gpio = irq_to_gpio(irq);
+        struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
+        u32 bit, val;
+        int edge;
+        void __iomem *reg = port->base;
+
+        switch (type) {
+        case IRQT_RISING:
+                edge = GPIO_INT_RISE_EDGE;
+                break;
+        case IRQT_FALLING:
+                edge = GPIO_INT_FALL_EDGE;
+                break;
+        case IRQT_LOW:
+                edge = GPIO_INT_LOW_LEV;
+                break;
+        case IRQT_HIGH:
+                edge = GPIO_INT_HIGH_LEV;
+                break;
+        default:        /* this includes IRQT_BOTHEDGE */
+                return -EINVAL;
+        }
+
+        reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+        bit = gpio & 0xf;
+        val = __raw_readl(reg) & ~(0x3 << (bit << 1));
+        __raw_writel(val | (edge << (bit << 1)), reg);
+        _clear_gpio_irqstatus(port, gpio & 0x1f);
+
+        return 0;
+}
+
+/* handle n interrupts in one status register */
+static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
+{
+        u32 gpio_irq_no;
+
+        gpio_irq_no = port->virtual_irq_start;
+        for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+
+                if ((irq_stat & 1) == 0)
+                        continue;
+
+                BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+                irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
+                                &irq_desc[gpio_irq_no]);
+        }
+}
+
+#ifdef CONFIG_ARCH_MX3
+/* MX3 has one interrupt *per* gpio port */
+static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+        u32 irq_stat;
+        struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
+
+        irq_stat = __raw_readl(port->base + GPIO_ISR) &
+                        __raw_readl(port->base + GPIO_IMR);
+        BUG_ON(!irq_stat);
+        mxc_gpio_irq_handler(port, irq_stat);
+}
+#endif
+
+#ifdef CONFIG_ARCH_MX2
+/* MX2 has one interrupt *for all* gpio ports */
+static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+        int i;
+        u32 irq_msk, irq_stat;
+        struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
+
+        /* walk through all interrupt status registers */
+        for (i = 0; i < gpio_table_size; i++) {
+                irq_msk = __raw_readl(port[i].base + GPIO_IMR);
+                if (!irq_msk)
+                        continue;
+
+                irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
+                if (irq_stat)
+                        mxc_gpio_irq_handler(&port[i], irq_stat);
+        }
+}
+#endif
+
+static struct irq_chip gpio_irq_chip = {
+        .ack = gpio_ack_irq,
+        .mask = gpio_mask_irq,
+        .unmask = gpio_unmask_irq,
+        .set_type = gpio_set_irq_type,
+};
+
+static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
+                                int dir)
+{
+        struct mxc_gpio_port *port =
+                container_of(chip, struct mxc_gpio_port, chip);
+        u32 l;
+
+        l = __raw_readl(port->base + GPIO_GDIR);
+        if (dir)
+                l |= 1 << offset;
+        else
+                l &= ~(1 << offset);
+        __raw_writel(l, port->base + GPIO_GDIR);
+}
+
+static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+        struct mxc_gpio_port *port =
+                container_of(chip, struct mxc_gpio_port, chip);
+        void __iomem *reg = port->base + GPIO_DR;
+        u32 l;
+
+        l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset);
+        __raw_writel(l, reg);
+}
+
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+        struct mxc_gpio_port *port =
+                container_of(chip, struct mxc_gpio_port, chip);
+
+        return (__raw_readl(port->base + GPIO_DR) >> offset) & 1;
+}
+
+static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+        _set_gpio_direction(chip, offset, 0);
+        return 0;
+}
+
+static int mxc_gpio_direction_output(struct gpio_chip *chip,
+                                     unsigned offset, int value)
+{
+        _set_gpio_direction(chip, offset, 1);
+        mxc_gpio_set(chip, offset, value);
+        return 0;
+}
+
+int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
+{
+        int i, j;
+
+        /* save for local usage */
+        mxc_gpio_ports = port;
+        gpio_table_size = cnt;
+
+        printk(KERN_INFO "MXC GPIO hardware\n");
+
+        for (i = 0; i < cnt; i++) {
+                /* disable the interrupt and clear the status */
+                __raw_writel(0, port[i].base + GPIO_IMR);
+                __raw_writel(~0, port[i].base + GPIO_ISR);
+                for (j = port[i].virtual_irq_start;
+                        j < port[i].virtual_irq_start + 32; j++) {
+                        set_irq_chip(j, &gpio_irq_chip);
+                        set_irq_handler(j, handle_edge_irq);
+                        set_irq_flags(j, IRQF_VALID);
+                }
+
+                /* register gpio chip */
+                port[i].chip.direction_input = mxc_gpio_direction_input;
+                port[i].chip.direction_output = mxc_gpio_direction_output;
+                port[i].chip.get = mxc_gpio_get;
+                port[i].chip.set = mxc_gpio_set;
+                port[i].chip.base = i * 32;
+                port[i].chip.ngpio = 32;
+
+                /* its a serious configuration bug when it fails */
+                BUG_ON( gpiochip_add(&port[i].chip) < 0 );
+
+#ifdef CONFIG_ARCH_MX3
+                /* setup one handler for each entry */
+                set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
+                set_irq_data(port[i].irq, &port[i]);
+#endif
+        }
+
+#ifdef CONFIG_ARCH_MX2
+        /* setup one handler for all GPIO interrupts */
+        set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
+        set_irq_data(port[0].irq, port);
+#endif
+        return 0;
+}
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
new file mode 100644
index 000000000000..1985571eb40c
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -0,0 +1,156 @@
+/*
+ *  arch/arm/mach-mxc/generic.c
+ *
+ *  author: Sascha Hauer
+ *  Created: april 20th, 2004
+ *  Copyright: Synertronixx GmbH
+ *
+ *  Common code for i.MX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware.h>
+#include <asm/mach/map.h>
+#include <asm/arch/iomux-mx1-mx2.h>
+
+void mxc_gpio_mode(int gpio_mode)
+{
+        unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+        unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
+        unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
+        unsigned int tmp;
+
+        /* Pullup enable */
+        tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port));
+        if (gpio_mode & GPIO_PUEN)
+                tmp |= (1 << pin);
+        else
+                tmp &= ~(1 << pin);
+        __raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port));
+
+        /* Data direction */
+        tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port));
+        if (gpio_mode & GPIO_OUT)
+                tmp |= 1 << pin;
+        else
+                tmp &= ~(1 << pin);
+        __raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port));
+
+        /* Primary / alternate function */
+        tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port));
+        if (gpio_mode & GPIO_AF)
+                tmp |= (1 << pin);
+        else
+                tmp &= ~(1 << pin);
+        __raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port));
+
+        /* use as gpio? */
+        tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port));
+        if (gpio_mode & (GPIO_PF | GPIO_AF))
+                tmp &= ~(1 << pin);
+        else
+                tmp |= (1 << pin);
+        __raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port));
+
+        if (pin < 16) {
+                tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port));
+                tmp &= ~(3 << (pin * 2));
+                tmp |= (ocr << (pin * 2));
+                __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port));
+
+                tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port));
+                tmp &= ~(3 << (pin * 2));
+                tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
+                __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port));
+
+                tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port));
+                tmp &= ~(3 << (pin * 2));
+                tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
+                __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port));
+        } else {
+                pin -= 16;
+
+                tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port));
+                tmp &= ~(3 << (pin * 2));
+                tmp |= (ocr << (pin * 2));
+                __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port));
+
+                tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port));
+                tmp &= ~(3 << (pin * 2));
+                tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
+                __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port));
+
+                tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port));
+                tmp &= ~(3 << (pin * 2));
+                tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
+                __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port));
+        }
+}
+EXPORT_SYMBOL(mxc_gpio_mode);
+
+int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+                                int alloc_mode, const char *label)
+{
+        const int *p = pin_list;
+        int i;
+        unsigned gpio;
+        unsigned mode;
+
+        for (i = 0; i < count; i++) {
+                gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+                mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+                if (gpio >= (GPIO_PORT_MAX + 1) * 32)
+                        goto setup_error;
+
+                if (alloc_mode & MXC_GPIO_ALLOC_MODE_RELEASE)
+                        gpio_free(gpio);
+                else if (!(alloc_mode & MXC_GPIO_ALLOC_MODE_NO_ALLOC))
+                        if (gpio_request(gpio, label)
+                           && !(alloc_mode & MXC_GPIO_ALLOC_MODE_TRY_ALLOC))
+                                goto setup_error;
+
+                if (!(alloc_mode & (MXC_GPIO_ALLOC_MODE_ALLOC_ONLY |
+                                    MXC_GPIO_ALLOC_MODE_RELEASE)))
+                        mxc_gpio_mode(gpio | mode);
+
+                p++;
+        }
+        return 0;
+
+setup_error:
+        if (alloc_mode & (MXC_GPIO_ALLOC_MODE_NO_ALLOC |
+            MXC_GPIO_ALLOC_MODE_TRY_ALLOC))
+                return -EINVAL;
+
+        while (p != pin_list) {
+                p--;
+                gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+                gpio_free(gpio);
+        }
+
+        return -EINVAL;
+}
+EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
+
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 2ad5a6917b3f..1fbe01da6925 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -1,24 +1,59 @@
 /*
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
  */
 
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <asm/hardware.h>
+#include <linux/irq.h>
 #include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
 #include <asm/arch/common.h>
 
+#define AVIC_BASE               IO_ADDRESS(AVIC_BASE_ADDR)
+#define AVIC_INTCNTL            (AVIC_BASE + 0x00)      /* int control reg */
+#define AVIC_NIMASK             (AVIC_BASE + 0x04)      /* int mask reg */
+#define AVIC_INTENNUM           (AVIC_BASE + 0x08)      /* int enable number reg */
+#define AVIC_INTDISNUM          (AVIC_BASE + 0x0C)      /* int disable number reg */
+#define AVIC_INTENABLEH         (AVIC_BASE + 0x10)      /* int enable reg high */
+#define AVIC_INTENABLEL         (AVIC_BASE + 0x14)      /* int enable reg low */
+#define AVIC_INTTYPEH           (AVIC_BASE + 0x18)      /* int type reg high */
+#define AVIC_INTTYPEL           (AVIC_BASE + 0x1C)      /* int type reg low */
+#define AVIC_NIPRIORITY7        (AVIC_BASE + 0x20)      /* norm int priority lvl7 */
+#define AVIC_NIPRIORITY6        (AVIC_BASE + 0x24)      /* norm int priority lvl6 */
+#define AVIC_NIPRIORITY5        (AVIC_BASE + 0x28)      /* norm int priority lvl5 */
+#define AVIC_NIPRIORITY4        (AVIC_BASE + 0x2C)      /* norm int priority lvl4 */
+#define AVIC_NIPRIORITY3        (AVIC_BASE + 0x30)      /* norm int priority lvl3 */
+#define AVIC_NIPRIORITY2        (AVIC_BASE + 0x34)      /* norm int priority lvl2 */
+#define AVIC_NIPRIORITY1        (AVIC_BASE + 0x38)      /* norm int priority lvl1 */
+#define AVIC_NIPRIORITY0        (AVIC_BASE + 0x3C)      /* norm int priority lvl0 */
+#define AVIC_NIVECSR            (AVIC_BASE + 0x40)      /* norm int vector/status */
+#define AVIC_FIVECSR            (AVIC_BASE + 0x44)      /* fast int vector/status */
+#define AVIC_INTSRCH            (AVIC_BASE + 0x48)      /* int source reg high */
+#define AVIC_INTSRCL            (AVIC_BASE + 0x4C)      /* int source reg low */
+#define AVIC_INTFRCH            (AVIC_BASE + 0x50)      /* int force reg high */
+#define AVIC_INTFRCL            (AVIC_BASE + 0x54)      /* int force reg low */
+#define AVIC_NIPNDH             (AVIC_BASE + 0x58)      /* norm int pending high */
+#define AVIC_NIPNDL             (AVIC_BASE + 0x5C)      /* norm int pending low */
+#define AVIC_FIPNDH             (AVIC_BASE + 0x60)      /* fast int pending high */
+#define AVIC_FIPNDL             (AVIC_BASE + 0x64)      /* fast int pending low */
+
+#define SYSTEM_PREV_REG         IO_ADDRESS(IIM_BASE_ADDR + 0x20)
+#define SYSTEM_SREV_REG         IO_ADDRESS(IIM_BASE_ADDR + 0x24)
+#define IIM_PROD_REV_SH         3
+#define IIM_PROD_REV_LEN        5
+
 /* Disable interrupt number "irq" in the AVIC */
 static void mxc_mask_irq(unsigned int irq)
 {
@@ -32,7 +67,7 @@ static void mxc_unmask_irq(unsigned int irq)
 }
 
 static struct irq_chip mxc_avic_chip = {
-        .mask_ack = mxc_mask_irq,
+        .ack = mxc_mask_irq,
         .mask = mxc_mask_irq,
         .unmask = mxc_unmask_irq,
 };
@@ -71,5 +106,8 @@ void __init mxc_init_irq(void)
         reg |= (0xF << 28);
         __raw_writel(reg, AVIC_NIPRIORITY6);
 
+        /* init architectures chained interrupt handler */
+        mxc_register_gpios();
+
         printk(KERN_INFO "MXC IRQ initialized\n");
 }
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
new file mode 100644
index 000000000000..3bf86343fdf4
--- /dev/null
+++ b/arch/arm/plat-mxc/time.c
@@ -0,0 +1,228 @@
+/*
+ *  linux/arch/arm/plat-mxc/time.c
+ *
+ *  Copyright (C) 2000-2001 Deep Blue Solutions
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
+ *  Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/mach/time.h>
+#include <asm/arch/common.h>
+#include <asm/arch/mxc_timer.h>
+
+static struct clock_event_device clockevent_mxc;
+static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+/* clock source for the timer */
+static struct clk *timer_clk;
+
+/* clock source */
+
+static cycle_t mxc_get_cycles(void)
+{
+        return __raw_readl(TIMER_BASE + MXC_TCN);
+}
+
+static struct clocksource clocksource_mxc = {
+        .name           = "mxc_timer1",
+        .rating         = 200,
+        .read           = mxc_get_cycles,
+        .mask           = CLOCKSOURCE_MASK(32),
+        .shift          = 20,
+        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init mxc_clocksource_init(void)
+{
+        unsigned int clock;
+
+        clock = clk_get_rate(timer_clk);
+
+        clocksource_mxc.mult = clocksource_hz2mult(clock,
+                                        clocksource_mxc.shift);
+        clocksource_register(&clocksource_mxc);
+
+        return 0;
+}
+
+/* clock event */
+
+static int mxc_set_next_event(unsigned long evt,
+                              struct clock_event_device *unused)
+{
+        unsigned long tcmp;
+
+        tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
+        __raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
+
+        return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
+                                -ETIME : 0;
+}
+
+#ifdef DEBUG
+static const char *clock_event_mode_label[] = {
+        [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
+        [CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
+        [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
+        [CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
+};
+#endif /* DEBUG */
+
+static void mxc_set_mode(enum clock_event_mode mode,
+                                struct clock_event_device *evt)
+{
+        unsigned long flags;
+
+        /*
+         * The timer interrupt generation is disabled at least
+         * for enough time to call mxc_set_next_event()
+         */
+        local_irq_save(flags);
+
+        /* Disable interrupt in GPT module */
+        gpt_irq_disable();
+
+        if (mode != clockevent_mode) {
+                /* Set event time into far-far future */
+                __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
+                                TIMER_BASE + MXC_TCMP);
+                /* Clear pending interrupt */
+                gpt_irq_acknowledge();
+        }
+
+#ifdef DEBUG
+        printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n",
+                clock_event_mode_label[clockevent_mode],
+                clock_event_mode_label[mode]);
+#endif /* DEBUG */
+
+        /* Remember timer mode */
+        clockevent_mode = mode;
+        local_irq_restore(flags);
+
+        switch (mode) {
+        case CLOCK_EVT_MODE_PERIODIC:
+                printk(KERN_ERR"mxc_set_mode: Periodic mode is not "
+                                "supported for i.MX\n");
+                break;
+        case CLOCK_EVT_MODE_ONESHOT:
+        /*
+         * Do not put overhead of interrupt enable/disable into
+         * mxc_set_next_event(), the core has about 4 minutes
+         * to call mxc_set_next_event() or shutdown clock after
+         * mode switching
+         */
+                local_irq_save(flags);
+                gpt_irq_enable();
+                local_irq_restore(flags);
+                break;
+        case CLOCK_EVT_MODE_SHUTDOWN:
+        case CLOCK_EVT_MODE_UNUSED:
+        case CLOCK_EVT_MODE_RESUME:
+                /* Left event sources disabled, no more interrupts appear */
+                break;
+        }
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
+{
+        struct clock_event_device *evt = &clockevent_mxc;
+        uint32_t tstat;
+
+        tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
+
+        gpt_irq_acknowledge();
+
+        evt->event_handler(evt);
+
+        return IRQ_HANDLED;
+}
+
+static struct irqaction mxc_timer_irq = {
+        .name           = "i.MX Timer Tick",
+        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+        .handler        = mxc_timer_interrupt,
+};
+
+static struct clock_event_device clockevent_mxc = {
+        .name           = "mxc_timer1",
+        .features       = CLOCK_EVT_FEAT_ONESHOT,
+        .shift          = 32,
+        .set_mode       = mxc_set_mode,
+        .set_next_event = mxc_set_next_event,
+        .rating         = 200,
+};
+
+static int __init mxc_clockevent_init(void)
+{
+        unsigned int clock;
+
+        clock = clk_get_rate(timer_clk);
+
+        clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC,
+                                        clockevent_mxc.shift);
+        clockevent_mxc.max_delta_ns =
+                        clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
+        clockevent_mxc.min_delta_ns =
+                        clockevent_delta2ns(0xff, &clockevent_mxc);
+
+        clockevent_mxc.cpumask = cpumask_of_cpu(0);
+
+        clockevents_register_device(&clockevent_mxc);
+
+        return 0;
+}
+
+void __init mxc_timer_init(const char *clk_timer)
+{
+        timer_clk = clk_get(NULL, clk_timer);
+        if (!timer_clk) {
+                printk(KERN_ERR"Cannot determine timer clock. Giving up.\n");
+                return;
+        }
+
+        clk_enable(timer_clk);
+
+        /*
+         * Initialise to a known state (all timers off, and timing reset)
+         */
+        __raw_writel(0, TIMER_BASE + MXC_TCTL);
+        __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
+
+        __raw_writel(TCTL_FRR | /* free running */
+                     TCTL_VAL | /* set clocksource and arch specific bits */
+                     TCTL_TEN,  /* start the timer */
+                     TIMER_BASE + MXC_TCTL);
+
+        /* init and register the timer to the framework */
+        mxc_clocksource_init();
+        mxc_clockevent_init();
+
+        /* Make irqs happen */
+        setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
+}
+
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index bc639a30d6d1..2c4051cc79a1 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o \
+obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
          usb.o fb.o
 obj-m :=
 obj-n :=
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 2db5580048d8..c2e741de0203 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/plat-omap/clock.c
  *
- *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Copyright (C) 2004 - 2008 Nokia corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
  *  Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
@@ -22,6 +22,7 @@
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
+#include <linux/debugfs.h>
 
 #include <asm/io.h>
 
@@ -33,41 +34,6 @@ static DEFINE_SPINLOCK(clockfw_lock);
 
 static struct clk_functions *arch_clock;
 
-#ifdef CONFIG_PM_DEBUG
-
-static void print_parents(struct clk *clk)
-{
-        struct clk *p;
-        int printed = 0;
-
-        list_for_each_entry(p, &clocks, node) {
-                if (p->parent == clk && p->usecount) {
-                        if (!clk->usecount && !printed) {
-                                printk("MISMATCH: %s\n", clk->name);
-                                printed = 1;
-                        }
-                        printk("\t%-15s\n", p->name);
-                }
-        }
-}
-
-void clk_print_usecounts(void)
-{
-        unsigned long flags;
-        struct clk *p;
-
-        spin_lock_irqsave(&clockfw_lock, flags);
-        list_for_each_entry(p, &clocks, node) {
-                if (p->usecount)
-                        printk("%-15s: %d\n", p->name, p->usecount);
-                print_parents(p);
-
-        }
-        spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-
-#endif
-
 /*-------------------------------------------------------------------------
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
@@ -446,3 +412,93 @@ int __init clk_init(struct clk_functions * custom_clocks)
         return 0;
 }
 
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ *      debugfs support to trace clock tree hierarchy and attributes
+ */
+static struct dentry *clk_debugfs_root;
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+        int err;
+        struct dentry *d, *child;
+        struct clk *pa = c->parent;
+        char s[255];
+        char *p = s;
+
+        p += sprintf(p, "%s", c->name);
+        if (c->id != 0)
+                sprintf(p, ":%d", c->id);
+        d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
+        if (IS_ERR(d))
+                return PTR_ERR(d);
+        c->dent = d;
+
+        d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+        if (IS_ERR(d)) {
+                err = PTR_ERR(d);
+                goto err_out;
+        }
+        d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+        if (IS_ERR(d)) {
+                err = PTR_ERR(d);
+                goto err_out;
+        }
+        d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+        if (IS_ERR(d)) {
+                err = PTR_ERR(d);
+                goto err_out;
+        }
+        return 0;
+
+err_out:
+        d = c->dent;
+        list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+                debugfs_remove(child);
+        debugfs_remove(c->dent);
+        return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+        int err;
+        struct clk *pa = c->parent;
+
+        if (pa && !pa->dent) {
+                err = clk_debugfs_register(pa);
+                if (err)
+                        return err;
+        }
+
+        if (!c->dent) {
+                err = clk_debugfs_register_one(c);
+                if (err)
+                        return err;
+        }
+        return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+        struct clk *c;
+        struct dentry *d;
+        int err;
+
+        d = debugfs_create_dir("clock", NULL);
+        if (IS_ERR(d))
+                return PTR_ERR(d);
+        clk_debugfs_root = d;
+
+        list_for_each_entry(c, &clocks, node) {
+                err = clk_debugfs_register(c);
+                if (err)
+                        goto err_out;
+        }
+        return 0;
+err_out:
+        debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
+        return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index bd1cef2c3c14..8d04929a3c75 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -26,6 +26,7 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
+#include <asm/arch/common.h>
 #include <asm/arch/board.h>
 #include <asm/arch/control.h>
 #include <asm/arch/mux.h>
@@ -241,30 +242,70 @@ arch_initcall(omap_init_clocksource_32k);
 
 /* Global address base setup code */
 
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+static struct omap_globals *omap2_globals;
+
+static void __init __omap2_set_globals(void)
+{
+        omap2_set_globals_memory(omap2_globals);
+        omap2_set_globals_control(omap2_globals);
+        omap2_set_globals_prcm(omap2_globals);
+}
+
+#endif
+
 #if defined(CONFIG_ARCH_OMAP2420)
+
+static struct omap_globals omap242x_globals = {
+        .tap    = (__force void __iomem *)OMAP2_IO_ADDRESS(0x48014000),
+        .sdrc   = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
+        .sms    = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
+        .ctrl   = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
+        .prm    = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
+        .cm     = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
+};
+
 void __init omap2_set_globals_242x(void)
 {
-        omap2_sdrc_base = OMAP2420_SDRC_BASE;
-        omap2_sms_base = OMAP2420_SMS_BASE;
-        omap_ctrl_base_set(OMAP2420_CTRL_BASE);
+        omap2_globals = &omap242x_globals;
+        __omap2_set_globals();
 }
 #endif
 
 #if defined(CONFIG_ARCH_OMAP2430)
+
+static struct omap_globals omap243x_globals = {
+        .tap    = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4900a000),
+        .sdrc   = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
+        .sms    = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
+        .ctrl   = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
+        .prm    = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
+        .cm     = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
+};
+
 void __init omap2_set_globals_243x(void)
 {
-        omap2_sdrc_base = OMAP243X_SDRC_BASE;
-        omap2_sms_base = OMAP243X_SMS_BASE;
-        omap_ctrl_base_set(OMAP243X_CTRL_BASE);
+        omap2_globals = &omap243x_globals;
+        __omap2_set_globals();
 }
 #endif
 
 #if defined(CONFIG_ARCH_OMAP3430)
+
+static struct omap_globals omap343x_globals = {
+        .tap    = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4830A000),
+        .sdrc   = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
+        .sms    = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
+        .ctrl   = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
+        .prm    = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
+        .cm     = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
+};
+
 void __init omap2_set_globals_343x(void)
 {
-        omap2_sdrc_base = OMAP343X_SDRC_BASE;
-        omap2_sms_base = OMAP343X_SMS_BASE;
-        omap_ctrl_base_set(OMAP343X_CTRL_BASE);
+        omap2_globals = &omap343x_globals;
+        __omap2_set_globals();
 }
 #endif
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 4a53f9ba6c43..81002b722da1 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -24,6 +24,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/menelaus.h>
+#include <asm/arch/mcbsp.h>
 
 #if     defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
@@ -145,6 +146,53 @@ static inline void omap_init_kp(void) {}
 #endif
 
 /*-------------------------------------------------------------------------*/
+#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
+
+static struct platform_device **omap_mcbsp_devices;
+
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+                                        int size)
+{
+        int i;
+
+        if (size > OMAP_MAX_MCBSP_COUNT) {
+                printk(KERN_WARNING "Registered too many McBSPs platform_data."
+                        " Using maximum (%d) available.\n",
+                        OMAP_MAX_MCBSP_COUNT);
+                size = OMAP_MAX_MCBSP_COUNT;
+        }
+
+        omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+                                     GFP_KERNEL);
+        if (!omap_mcbsp_devices) {
+                printk(KERN_ERR "Could not register McBSP devices\n");
+                return;
+        }
+
+        for (i = 0; i < size; i++) {
+                struct platform_device *new_mcbsp;
+                int ret;
+
+                new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+                if (!new_mcbsp)
+                        continue;
+                new_mcbsp->dev.platform_data = &config[i];
+                ret = platform_device_add(new_mcbsp);
+                if (ret) {
+                        platform_device_put(new_mcbsp);
+                        continue;
+                }
+                omap_mcbsp_devices[i] = new_mcbsp;
+        }
+}
+
+#else
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+                                        int size)
+{  }
+#endif
+
+/*-------------------------------------------------------------------------*/
 
 #if     defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 39c637b0ffea..fac8e994f588 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/plat-omap/dma.c
  *
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  * Author: Juha Yrjölä <juha.yrjola@nokia.com>
  * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
  * Graphics DMA and LCD DMA graphics tranformations
@@ -25,11 +25,11 @@
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>
 #include <asm/dma.h>
-#include <asm/io.h>
 
 #include <asm/arch/tc.h>
 
@@ -43,13 +43,13 @@ enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
 enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
 #endif
 
-#define OMAP_DMA_ACTIVE         0x01
-#define OMAP_DMA_CCR_EN         (1 << 7)
+#define OMAP_DMA_ACTIVE                 0x01
+#define OMAP_DMA_CCR_EN                 (1 << 7)
 #define OMAP2_DMA_CSR_CLEAR_MASK        0xffe
 
-#define OMAP_FUNC_MUX_ARM_BASE  (0xfffe1000 + 0xec)
+#define OMAP_FUNC_MUX_ARM_BASE          (0xfffe1000 + 0xec)
 
-static int enable_1510_mode = 0;
+static int enable_1510_mode;
 
 struct omap_dma_lch {
         int next_lch;
@@ -57,7 +57,7 @@ struct omap_dma_lch {
         u16 saved_csr;
         u16 enabled_irqs;
         const char *dev_name;
-        void (* callback)(int lch, u16 ch_status, void *data);
+        void (*callback)(int lch, u16 ch_status, void *data);
         void *data;
 
 #ifndef CONFIG_ARCH_OMAP1
@@ -72,7 +72,6 @@ struct omap_dma_lch {
         long flags;
 };
 
-#ifndef CONFIG_ARCH_OMAP1
 struct dma_link_info {
         int *linked_dmach_q;
         int no_of_lchs_linked;
@@ -86,7 +85,9 @@ struct dma_link_info {
 
 };
 
-static struct dma_link_info dma_linked_lch[OMAP_LOGICAL_DMA_CH_COUNT];
+static struct dma_link_info *dma_linked_lch;
+
+#ifndef CONFIG_ARCH_OMAP1
 
 /* Chain handling macros */
 #define OMAP_DMA_CHAIN_QINIT(chain_id)                                  \
@@ -119,12 +120,15 @@ static struct dma_link_info dma_linked_lch[OMAP_LOGICAL_DMA_CH_COUNT];
                 dma_linked_lch[chain_id].q_count++; \
         } while (0)
 #endif
+
+static int dma_lch_count;
 static int dma_chan_count;
 
 static spinlock_t dma_chan_lock;
-static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT];
+static struct omap_dma_lch *dma_chan;
+static void __iomem *omap_dma_base;
 
-static const u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
+static const u8 omap1_dma_irq[OMAP1_LOGICAL_DMA_CH_COUNT] = {
         INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
         INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
         INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
@@ -139,6 +143,24 @@ static inline void omap_enable_channel_irq(int lch);
 #define REVISIT_24XX()          printk(KERN_ERR "FIXME: no %s on 24xx\n", \
                                                 __func__);
 
+#define dma_read(reg)                                                   \
+({                                                                      \
+        u32 __val;                                                      \
+        if (cpu_class_is_omap1())                                       \
+                __val = __raw_readw(omap_dma_base + OMAP1_DMA_##reg);   \
+        else                                                            \
+                __val = __raw_readl(omap_dma_base + OMAP_DMA4_##reg);   \
+        __val;                                                          \
+})
+
+#define dma_write(val, reg)                                             \
+({                                                                      \
+        if (cpu_class_is_omap1())                                       \
+                __raw_writew((u16)(val), omap_dma_base + OMAP1_DMA_##reg); \
+        else                                                            \
+                __raw_writel((val), omap_dma_base + OMAP_DMA4_##reg);   \
+})
+
 #ifdef CONFIG_ARCH_OMAP15XX
 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
 int omap_dma_in_1510_mode(void)
@@ -173,13 +195,14 @@ static inline void set_gdma_dev(int req, int dev)
 #define set_gdma_dev(req, dev)  do {} while (0)
 #endif
 
+/* Omap1 only */
 static void clear_lch_regs(int lch)
 {
         int i;
-        u32 lch_base = OMAP_DMA_BASE + lch * 0x40;
+        void __iomem *lch_base = omap_dma_base + OMAP1_DMA_CH_BASE(lch);
 
         for (i = 0; i < 0x2c; i += 2)
-                omap_writew(0, lch_base + i);
+                __raw_writew(0, lch_base + i);
 }
 
 void omap_set_dma_priority(int lch, int dst_port, int priority)
@@ -212,33 +235,49 @@ void omap_set_dma_priority(int lch, int dst_port, int priority)
         }
 
         if (cpu_class_is_omap2()) {
+                u32 ccr;
+
+                ccr = dma_read(CCR(lch));
                 if (priority)
-                        OMAP_DMA_CCR_REG(lch) |= (1 << 6);
+                        ccr |= (1 << 6);
                 else
-                        OMAP_DMA_CCR_REG(lch) &= ~(1 << 6);
+                        ccr &= ~(1 << 6);
+                dma_write(ccr, CCR(lch));
         }
 }
+EXPORT_SYMBOL(omap_set_dma_priority);
 
 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
                                   int frame_count, int sync_mode,
                                   int dma_trigger, int src_or_dst_synch)
 {
-        OMAP_DMA_CSDP_REG(lch) &= ~0x03;
-        OMAP_DMA_CSDP_REG(lch) |= data_type;
+        u32 l;
+
+        l = dma_read(CSDP(lch));
+        l &= ~0x03;
+        l |= data_type;
+        dma_write(l, CSDP(lch));
 
         if (cpu_class_is_omap1()) {
-                OMAP_DMA_CCR_REG(lch) &= ~(1 << 5);
+                u16 ccr;
+
+                ccr = dma_read(CCR(lch));
+                ccr &= ~(1 << 5);
                 if (sync_mode == OMAP_DMA_SYNC_FRAME)
-                        OMAP_DMA_CCR_REG(lch) |= 1 << 5;
+                        ccr |= 1 << 5;
+                dma_write(ccr, CCR(lch));
 
-                OMAP1_DMA_CCR2_REG(lch) &= ~(1 << 2);
+                ccr = dma_read(CCR2(lch));
+                ccr &= ~(1 << 2);
                 if (sync_mode == OMAP_DMA_SYNC_BLOCK)
-                        OMAP1_DMA_CCR2_REG(lch) |= 1 << 2;
+                        ccr |= 1 << 2;
+                dma_write(ccr, CCR2(lch));
         }
 
         if (cpu_class_is_omap2() && dma_trigger) {
-                u32 val = OMAP_DMA_CCR_REG(lch);
+                u32 val;
 
+                val = dma_read(CCR(lch));
                 val &= ~(3 << 19);
                 if (dma_trigger > 63)
                         val |= 1 << 20;
@@ -263,12 +302,13 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
                 else
                         val &= ~(1 << 24);      /* dest synch */
 
-                OMAP_DMA_CCR_REG(lch) = val;
+                dma_write(val, CCR(lch));
         }
 
-        OMAP_DMA_CEN_REG(lch) = elem_count;
-        OMAP_DMA_CFN_REG(lch) = frame_count;
+        dma_write(elem_count, CEN(lch));
+        dma_write(frame_count, CFN(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_transfer_params);
 
 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 {
@@ -281,7 +321,9 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
                 return;
         }
 
-        w = OMAP1_DMA_CCR2_REG(lch) & ~0x03;
+        w = dma_read(CCR2(lch));
+        w &= ~0x03;
+
         switch (mode) {
         case OMAP_DMA_CONSTANT_FILL:
                 w |= 0x01;
@@ -294,52 +336,81 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
         default:
                 BUG();
         }
-        OMAP1_DMA_CCR2_REG(lch) = w;
+        dma_write(w, CCR2(lch));
 
-        w = OMAP1_DMA_LCH_CTRL_REG(lch) & ~0x0f;
+        w = dma_read(LCH_CTRL(lch));
+        w &= ~0x0f;
         /* Default is channel type 2D */
         if (mode) {
-                OMAP1_DMA_COLOR_L_REG(lch) = (u16)color;
-                OMAP1_DMA_COLOR_U_REG(lch) = (u16)(color >> 16);
+                dma_write((u16)color, COLOR_L(lch));
+                dma_write((u16)(color >> 16), COLOR_U(lch));
                 w |= 1;         /* Channel type G */
         }
-        OMAP1_DMA_LCH_CTRL_REG(lch) = w;
+        dma_write(w, LCH_CTRL(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_color_mode);
 
 void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
 {
         if (cpu_class_is_omap2()) {
-                OMAP_DMA_CSDP_REG(lch) &= ~(0x3 << 16);
-                OMAP_DMA_CSDP_REG(lch) |= (mode << 16);
+                u32 csdp;
+
+                csdp = dma_read(CSDP(lch));
+                csdp &= ~(0x3 << 16);
+                csdp |= (mode << 16);
+                dma_write(csdp, CSDP(lch));
+        }
+}
+EXPORT_SYMBOL(omap_set_dma_write_mode);
+
+void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
+{
+        if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+                u32 l;
+
+                l = dma_read(LCH_CTRL(lch));
+                l &= ~0x7;
+                l |= mode;
+                dma_write(l, LCH_CTRL(lch));
         }
 }
+EXPORT_SYMBOL(omap_set_dma_channel_mode);
 
 /* Note that src_port is only for omap1 */
 void omap_set_dma_src_params(int lch, int src_port, int src_amode,
                              unsigned long src_start,
                              int src_ei, int src_fi)
 {
+        u32 l;
+
         if (cpu_class_is_omap1()) {
-                OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 2);
-                OMAP_DMA_CSDP_REG(lch) |= src_port << 2;
+                u16 w;
+
+                w = dma_read(CSDP(lch));
+                w &= ~(0x1f << 2);
+                w |= src_port << 2;
+                dma_write(w, CSDP(lch));
         }
 
-        OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 12);
-        OMAP_DMA_CCR_REG(lch) |= src_amode << 12;
+        l = dma_read(CCR(lch));
+        l &= ~(0x03 << 12);
+        l |= src_amode << 12;
+        dma_write(l, CCR(lch));
 
         if (cpu_class_is_omap1()) {
-                OMAP1_DMA_CSSA_U_REG(lch) = src_start >> 16;
-                OMAP1_DMA_CSSA_L_REG(lch) = src_start;
+                dma_write(src_start >> 16, CSSA_U(lch));
+                dma_write((u16)src_start, CSSA_L(lch));
         }
 
         if (cpu_class_is_omap2())
-                OMAP2_DMA_CSSA_REG(lch) = src_start;
+                dma_write(src_start, CSSA(lch));
 
-        OMAP_DMA_CSEI_REG(lch) = src_ei;
-        OMAP_DMA_CSFI_REG(lch) = src_fi;
+        dma_write(src_ei, CSEI(lch));
+        dma_write(src_fi, CSFI(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_src_params);
 
-void omap_set_dma_params(int lch, struct omap_dma_channel_params * params)
+void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
 {
         omap_set_dma_transfer_params(lch, params->data_type,
                                      params->elem_count, params->frame_count,
@@ -356,28 +427,37 @@ void omap_set_dma_params(int lch, struct omap_dma_channel_params * params)
                 omap_dma_set_prio_lch(lch, params->read_prio,
                                       params->write_prio);
 }
+EXPORT_SYMBOL(omap_set_dma_params);
 
 void omap_set_dma_src_index(int lch, int eidx, int fidx)
 {
-        if (cpu_class_is_omap2()) {
-                REVISIT_24XX();
+        if (cpu_class_is_omap2())
                 return;
-        }
-        OMAP_DMA_CSEI_REG(lch) = eidx;
-        OMAP_DMA_CSFI_REG(lch) = fidx;
+
+        dma_write(eidx, CSEI(lch));
+        dma_write(fidx, CSFI(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_src_index);
 
 void omap_set_dma_src_data_pack(int lch, int enable)
 {
-        OMAP_DMA_CSDP_REG(lch) &= ~(1 << 6);
+        u32 l;
+
+        l = dma_read(CSDP(lch));
+        l &= ~(1 << 6);
         if (enable)
-                OMAP_DMA_CSDP_REG(lch) |= (1 << 6);
+                l |= (1 << 6);
+        dma_write(l, CSDP(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_src_data_pack);
 
 void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 {
         unsigned int burst = 0;
-        OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
+        u32 l;
+
+        l = dma_read(CSDP(lch));
+        l &= ~(0x03 << 7);
 
         switch (burst_mode) {
         case OMAP_DMA_DATA_BURST_DIS:
@@ -408,55 +488,73 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
         default:
                 BUG();
         }
-        OMAP_DMA_CSDP_REG(lch) |= (burst << 7);
+
+        l |= (burst << 7);
+        dma_write(l, CSDP(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
 
 /* Note that dest_port is only for OMAP1 */
 void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
                               unsigned long dest_start,
                               int dst_ei, int dst_fi)
 {
+        u32 l;
+
         if (cpu_class_is_omap1()) {
-                OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 9);
-                OMAP_DMA_CSDP_REG(lch) |= dest_port << 9;
+                l = dma_read(CSDP(lch));
+                l &= ~(0x1f << 9);
+                l |= dest_port << 9;
+                dma_write(l, CSDP(lch));
         }
 
-        OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 14);
-        OMAP_DMA_CCR_REG(lch) |= dest_amode << 14;
+        l = dma_read(CCR(lch));
+        l &= ~(0x03 << 14);
+        l |= dest_amode << 14;
+        dma_write(l, CCR(lch));
 
         if (cpu_class_is_omap1()) {
-                OMAP1_DMA_CDSA_U_REG(lch) = dest_start >> 16;
-                OMAP1_DMA_CDSA_L_REG(lch) = dest_start;
+                dma_write(dest_start >> 16, CDSA_U(lch));
+                dma_write(dest_start, CDSA_L(lch));
         }
 
         if (cpu_class_is_omap2())
-                OMAP2_DMA_CDSA_REG(lch) = dest_start;
+                dma_write(dest_start, CDSA(lch));
 
-        OMAP_DMA_CDEI_REG(lch) = dst_ei;
-        OMAP_DMA_CDFI_REG(lch) = dst_fi;
+        dma_write(dst_ei, CDEI(lch));
+        dma_write(dst_fi, CDFI(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_dest_params);
 
 void omap_set_dma_dest_index(int lch, int eidx, int fidx)
 {
-        if (cpu_class_is_omap2()) {
-                REVISIT_24XX();
+        if (cpu_class_is_omap2())
                 return;
-        }
-        OMAP_DMA_CDEI_REG(lch) = eidx;
-        OMAP_DMA_CDFI_REG(lch) = fidx;
+
+        dma_write(eidx, CDEI(lch));
+        dma_write(fidx, CDFI(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_dest_index);
 
 void omap_set_dma_dest_data_pack(int lch, int enable)
 {
-        OMAP_DMA_CSDP_REG(lch) &= ~(1 << 13);
+        u32 l;
+
+        l = dma_read(CSDP(lch));
+        l &= ~(1 << 13);
         if (enable)
-                OMAP_DMA_CSDP_REG(lch) |= 1 << 13;
+                l |= 1 << 13;
+        dma_write(l, CSDP(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
 
 void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 {
         unsigned int burst = 0;
-        OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
+        u32 l;
+
+        l = dma_read(CSDP(lch));
+        l &= ~(0x03 << 14);
 
         switch (burst_mode) {
         case OMAP_DMA_DATA_BURST_DIS:
@@ -486,8 +584,10 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
                 BUG();
                 return;
         }
-        OMAP_DMA_CSDP_REG(lch) |= (burst << 14);
+        l |= (burst << 14);
+        dma_write(l, CSDP(lch));
 }
+EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
 
 static inline void omap_enable_channel_irq(int lch)
 {
@@ -495,62 +595,74 @@ static inline void omap_enable_channel_irq(int lch)
 
         /* Clear CSR */
         if (cpu_class_is_omap1())
-                status = OMAP_DMA_CSR_REG(lch);
+                status = dma_read(CSR(lch));
         else if (cpu_class_is_omap2())
-                OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
+                dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
 
         /* Enable some nice interrupts. */
-        OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
+        dma_write(dma_chan[lch].enabled_irqs, CICR(lch));
 }
 
 static void omap_disable_channel_irq(int lch)
 {
         if (cpu_class_is_omap2())
-                OMAP_DMA_CICR_REG(lch) = 0;
+                dma_write(0, CICR(lch));
 }
 
 void omap_enable_dma_irq(int lch, u16 bits)
 {
         dma_chan[lch].enabled_irqs |= bits;
 }
+EXPORT_SYMBOL(omap_enable_dma_irq);
 
 void omap_disable_dma_irq(int lch, u16 bits)
 {
         dma_chan[lch].enabled_irqs &= ~bits;
 }
+EXPORT_SYMBOL(omap_disable_dma_irq);
 
 static inline void enable_lnk(int lch)
 {
+        u32 l;
+
+        l = dma_read(CLNK_CTRL(lch));
+
         if (cpu_class_is_omap1())
-                OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 14);
+                l &= ~(1 << 14);
 
         /* Set the ENABLE_LNK bits */
         if (dma_chan[lch].next_lch != -1)
-                OMAP_DMA_CLNK_CTRL_REG(lch) =
-                        dma_chan[lch].next_lch | (1 << 15);
+                l = dma_chan[lch].next_lch | (1 << 15);
 
 #ifndef CONFIG_ARCH_OMAP1
-        if (dma_chan[lch].next_linked_ch != -1)
-                OMAP_DMA_CLNK_CTRL_REG(lch) =
-                        dma_chan[lch].next_linked_ch | (1 << 15);
+        if (cpu_class_is_omap2())
+                if (dma_chan[lch].next_linked_ch != -1)
+                        l = dma_chan[lch].next_linked_ch | (1 << 15);
 #endif
+
+        dma_write(l, CLNK_CTRL(lch));
 }
 
 static inline void disable_lnk(int lch)
 {
+        u32 l;
+
+        l = dma_read(CLNK_CTRL(lch));
+
         /* Disable interrupts */
         if (cpu_class_is_omap1()) {
-                OMAP_DMA_CICR_REG(lch) = 0;
+                dma_write(0, CICR(lch));
                 /* Set the STOP_LNK bit */
-                OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14;
+                l |= 1 << 14;
         }
 
         if (cpu_class_is_omap2()) {
                 omap_disable_channel_irq(lch);
                 /* Clear the ENABLE_LNK bit */
-                OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15);
+                l &= ~(1 << 15);
         }
 
+        dma_write(l, CLNK_CTRL(lch));
         dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 
@@ -561,13 +673,13 @@ static inline void omap2_enable_irq_lch(int lch)
         if (!cpu_class_is_omap2())
                 return;
 
-        val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
+        val = dma_read(IRQENABLE_L0);
         val |= 1 << lch;
-        omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
+        dma_write(val, IRQENABLE_L0);
 }
 
 int omap_request_dma(int dev_id, const char *dev_name,
-                     void (* callback)(int lch, u16 ch_status, void *data),
+                     void (*callback)(int lch, u16 ch_status, void *data),
                      void *data, int *dma_ch_out)
 {
         int ch, free_ch = -1;
@@ -600,10 +712,14 @@ int omap_request_dma(int dev_id, const char *dev_name,
         chan->dev_name = dev_name;
         chan->callback = callback;
         chan->data = data;
+
 #ifndef CONFIG_ARCH_OMAP1
-        chan->chain_id = -1;
-        chan->next_linked_ch = -1;
+        if (cpu_class_is_omap2()) {
+                chan->chain_id = -1;
+                chan->next_linked_ch = -1;
+        }
 #endif
+
         chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 
         if (cpu_class_is_omap1())
@@ -618,26 +734,28 @@ int omap_request_dma(int dev_id, const char *dev_name,
                         set_gdma_dev(free_ch + 1, dev_id);
                         dev_id = free_ch + 1;
                 }
-                /* Disable the 1510 compatibility mode and set the sync device
-                 * id. */
-                OMAP_DMA_CCR_REG(free_ch) = dev_id | (1 << 10);
+                /*
+                 * Disable the 1510 compatibility mode and set the sync device
+                 * id.
+                 */
+                dma_write(dev_id | (1 << 10), CCR(free_ch));
         } else if (cpu_is_omap730() || cpu_is_omap15xx()) {
-                OMAP_DMA_CCR_REG(free_ch) = dev_id;
+                dma_write(dev_id, CCR(free_ch));
         }
 
         if (cpu_class_is_omap2()) {
                 omap2_enable_irq_lch(free_ch);
-
                 omap_enable_channel_irq(free_ch);
                 /* Clear the CSR register and IRQ status register */
-                OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
-                omap_writel(1 << free_ch, OMAP_DMA4_IRQSTATUS_L0);
+                dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(free_ch));
+                dma_write(1 << free_ch, IRQSTATUS_L0);
         }
 
         *dma_ch_out = free_ch;
 
         return 0;
 }
+EXPORT_SYMBOL(omap_request_dma);
 
 void omap_free_dma(int lch)
 {
@@ -645,11 +763,12 @@ void omap_free_dma(int lch)
 
         spin_lock_irqsave(&dma_chan_lock, flags);
         if (dma_chan[lch].dev_id == -1) {
-                printk("omap_dma: trying to free nonallocated DMA channel %d\n",
+                pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
                        lch);
                 spin_unlock_irqrestore(&dma_chan_lock, flags);
                 return;
         }
+
         dma_chan[lch].dev_id = -1;
         dma_chan[lch].next_lch = -1;
         dma_chan[lch].callback = NULL;
@@ -657,30 +776,31 @@ void omap_free_dma(int lch)
 
         if (cpu_class_is_omap1()) {
                 /* Disable all DMA interrupts for the channel. */
-                OMAP_DMA_CICR_REG(lch) = 0;
+                dma_write(0, CICR(lch));
                 /* Make sure the DMA transfer is stopped. */
-                OMAP_DMA_CCR_REG(lch) = 0;
+                dma_write(0, CCR(lch));
         }
 
         if (cpu_class_is_omap2()) {
                 u32 val;
                 /* Disable interrupts */
-                val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
+                val = dma_read(IRQENABLE_L0);
                 val &= ~(1 << lch);
-                omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
+                dma_write(val, IRQENABLE_L0);
 
                 /* Clear the CSR register and IRQ status register */
-                OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
-                omap_writel(1 << lch, OMAP_DMA4_IRQSTATUS_L0);
+                dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
+                dma_write(1 << lch, IRQSTATUS_L0);
 
                 /* Disable all DMA interrupts for the channel. */
-                OMAP_DMA_CICR_REG(lch) = 0;
+                dma_write(0, CICR(lch));
 
                 /* Make sure the DMA transfer is stopped. */
-                OMAP_DMA_CCR_REG(lch) = 0;
+                dma_write(0, CCR(lch));
                 omap_clear_dma(lch);
         }
 }
+EXPORT_SYMBOL(omap_free_dma);
 
 /**
  * @brief omap_dma_set_global_params : Set global priority settings for dma
@@ -708,7 +828,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
         reg = (arb_rate & 0xff) << 16;
         reg |= (0xff & max_fifo_depth);
 
-        omap_writel(reg, OMAP_DMA4_GCR_REG);
+        dma_write(reg, GCR);
 }
 EXPORT_SYMBOL(omap_dma_set_global_params);
 
@@ -725,20 +845,21 @@ int
 omap_dma_set_prio_lch(int lch, unsigned char read_prio,
                       unsigned char write_prio)
 {
-        u32 w;
+        u32 l;
 
-        if (unlikely((lch < 0 || lch >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+        if (unlikely((lch < 0 || lch >= dma_lch_count))) {
                 printk(KERN_ERR "Invalid channel id\n");
                 return -EINVAL;
         }
-        w = OMAP_DMA_CCR_REG(lch);
-        w &= ~((1 << 6) | (1 << 26));
+        l = dma_read(CCR(lch));
+        l &= ~((1 << 6) | (1 << 26));
         if (cpu_is_omap2430() || cpu_is_omap34xx())
-                w |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
+                l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
         else
-                w |= ((read_prio & 0x1) << 6);
+                l |= ((read_prio & 0x1) << 6);
+
+        dma_write(l, CCR(lch));
 
-        OMAP_DMA_CCR_REG(lch) = w;
         return 0;
 }
 EXPORT_SYMBOL(omap_dma_set_prio_lch);
@@ -754,28 +875,34 @@ void omap_clear_dma(int lch)
         local_irq_save(flags);
 
         if (cpu_class_is_omap1()) {
-                int status;
-                OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
+                u32 l;
+
+                l = dma_read(CCR(lch));
+                l &= ~OMAP_DMA_CCR_EN;
+                dma_write(l, CCR(lch));
 
                 /* Clear pending interrupts */
-                status = OMAP_DMA_CSR_REG(lch);
+                l = dma_read(CSR(lch));
         }
 
         if (cpu_class_is_omap2()) {
                 int i;
-                u32 lch_base = OMAP_DMA4_BASE + lch * 0x60 + 0x80;
+                void __iomem *lch_base = omap_dma_base + OMAP_DMA4_CH_BASE(lch);
                 for (i = 0; i < 0x44; i += 4)
-                        omap_writel(0, lch_base + i);
+                        __raw_writel(0, lch_base + i);
         }
 
         local_irq_restore(flags);
 }
+EXPORT_SYMBOL(omap_clear_dma);
 
 void omap_start_dma(int lch)
 {
+        u32 l;
+
         if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
                 int next_lch, cur_lch;
-                char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
+                char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
 
                 dma_chan_link_map[lch] = 1;
                 /* Set the link register of the first channel */
@@ -799,27 +926,34 @@ void omap_start_dma(int lch)
                 } while (next_lch != -1);
         } else if (cpu_class_is_omap2()) {
                 /* Errata: Need to write lch even if not using chaining */
-                OMAP_DMA_CLNK_CTRL_REG(lch) = lch;
+                dma_write(lch, CLNK_CTRL(lch));
         }
 
         omap_enable_channel_irq(lch);
 
-        /* Errata: On ES2.0 BUFFERING disable must be set.
-         * This will always fail on ES1.0 */
-        if (cpu_is_omap24xx()) {
-                OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
-        }
+        l = dma_read(CCR(lch));
+
+        /*
+         * Errata: On ES2.0 BUFFERING disable must be set.
+         * This will always fail on ES1.0
+         */
+        if (cpu_is_omap24xx())
+                l |= OMAP_DMA_CCR_EN;
 
-        OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
+        l |= OMAP_DMA_CCR_EN;
+        dma_write(l, CCR(lch));
 
         dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 }
+EXPORT_SYMBOL(omap_start_dma);
 
 void omap_stop_dma(int lch)
 {
+        u32 l;
+
         if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
                 int next_lch, cur_lch = lch;
-                char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
+                char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
 
                 memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
                 do {
@@ -840,18 +974,22 @@ void omap_stop_dma(int lch)
 
         /* Disable all interrupts on the channel */
         if (cpu_class_is_omap1())
-                OMAP_DMA_CICR_REG(lch) = 0;
+                dma_write(0, CICR(lch));
+
+        l = dma_read(CCR(lch));
+        l &= ~OMAP_DMA_CCR_EN;
+        dma_write(l, CCR(lch));
 
-        OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
         dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
+EXPORT_SYMBOL(omap_stop_dma);
 
 /*
  * Allows changing the DMA callback function or data. This may be needed if
  * the driver shares a single DMA channel for multiple dma triggers.
  */
 int omap_set_dma_callback(int lch,
-                          void (* callback)(int lch, u16 ch_status, void *data),
+                          void (*callback)(int lch, u16 ch_status, void *data),
                           void *data)
 {
         unsigned long flags;
@@ -871,6 +1009,7 @@ int omap_set_dma_callback(int lch,
 
         return 0;
 }
+EXPORT_SYMBOL(omap_set_dma_callback);
 
 /*
  * Returns current physical source address for the given DMA channel.
@@ -884,15 +1023,24 @@ dma_addr_t omap_get_dma_src_pos(int lch)
 {
         dma_addr_t offset = 0;
 
-        if (cpu_class_is_omap1())
-                offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) |
-                                       (OMAP1_DMA_CSSA_U_REG(lch) << 16));
+        if (cpu_is_omap15xx())
+                offset = dma_read(CPC(lch));
+        else
+                offset = dma_read(CSAC(lch));
 
-        if (cpu_class_is_omap2())
-                offset = OMAP_DMA_CSAC_REG(lch);
+        /*
+         * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+         * read before the DMA controller finished disabling the channel.
+         */
+        if (!cpu_is_omap15xx() && offset == 0)
+                offset = dma_read(CSAC(lch));
+
+        if (cpu_class_is_omap1())
+                offset |= (dma_read(CSSA_U(lch)) << 16);
 
         return offset;
 }
+EXPORT_SYMBOL(omap_get_dma_src_pos);
 
 /*
  * Returns current physical destination address for the given DMA channel.
@@ -906,25 +1054,30 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
 {
         dma_addr_t offset = 0;
 
-        if (cpu_class_is_omap1())
-                offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) |
-                                       (OMAP1_DMA_CDSA_U_REG(lch) << 16));
+        if (cpu_is_omap15xx())
+                offset = dma_read(CPC(lch));
+        else
+                offset = dma_read(CDAC(lch));
 
-        if (cpu_class_is_omap2())
-                offset = OMAP_DMA_CDAC_REG(lch);
+        /*
+         * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+         * read before the DMA controller finished disabling the channel.
+         */
+        if (!cpu_is_omap15xx() && offset == 0)
+                offset = dma_read(CDAC(lch));
+
+        if (cpu_class_is_omap1())
+                offset |= (dma_read(CDSA_U(lch)) << 16);
 
         return offset;
 }
+EXPORT_SYMBOL(omap_get_dma_dst_pos);
 
-/*
- * Returns current source transfer counting for the given DMA channel.
- * Can be used to monitor the progress of a transfer inside a block.
- * It must be called with disabled interrupts.
- */
-int omap_get_dma_src_addr_counter(int lch)
+int omap_get_dma_active_status(int lch)
 {
-        return (dma_addr_t) OMAP_DMA_CSAC_REG(lch);
+        return (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN) != 0;
 }
+EXPORT_SYMBOL(omap_get_dma_active_status);
 
 int omap_dma_running(void)
 {
@@ -936,7 +1089,7 @@ int omap_dma_running(void)
                         return 1;
 
         for (lch = 0; lch < dma_chan_count; lch++)
-                if (OMAP_DMA_CCR_REG(lch) & OMAP_DMA_CCR_EN)
+                if (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN)
                         return 1;
 
         return 0;
@@ -947,7 +1100,7 @@ int omap_dma_running(void)
  * For this DMA link to start, you still need to start (see omap_start_dma)
  * the first one. That will fire up the entire queue.
  */
-void omap_dma_link_lch (int lch_head, int lch_queue)
+void omap_dma_link_lch(int lch_head, int lch_queue)
 {
         if (omap_dma_in_1510_mode()) {
                 printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
@@ -964,11 +1117,12 @@ void omap_dma_link_lch (int lch_head, int lch_queue)
 
         dma_chan[lch_head].next_lch = lch_queue;
 }
+EXPORT_SYMBOL(omap_dma_link_lch);
 
 /*
  * Once the DMA queue is stopped, we can destroy it.
  */
-void omap_dma_unlink_lch (int lch_head, int lch_queue)
+void omap_dma_unlink_lch(int lch_head, int lch_queue)
 {
         if (omap_dma_in_1510_mode()) {
                 printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
@@ -983,7 +1137,6 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue)
                 dump_stack();
         }
 
-
         if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
             (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
                 printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
@@ -993,12 +1146,15 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue)
 
         dma_chan[lch_head].next_lch = -1;
 }
+EXPORT_SYMBOL(omap_dma_unlink_lch);
+
+/*----------------------------------------------------------------------------*/
 
 #ifndef CONFIG_ARCH_OMAP1
 /* Create chain of DMA channesls */
 static void create_dma_lch_chain(int lch_head, int lch_queue)
 {
-        u32 w;
+        u32 l;
 
         /* Check if this is the first link in chain */
         if (dma_chan[lch_head].next_linked_ch == -1) {
@@ -1018,15 +1174,15 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
                                         lch_queue;
         }
 
-        w = OMAP_DMA_CLNK_CTRL_REG(lch_head);
-        w &= ~(0x1f);
-        w |= lch_queue;
-        OMAP_DMA_CLNK_CTRL_REG(lch_head) = w;
+        l = dma_read(CLNK_CTRL(lch_head));
+        l &= ~(0x1f);
+        l |= lch_queue;
+        dma_write(l, CLNK_CTRL(lch_head));
 
-        w = OMAP_DMA_CLNK_CTRL_REG(lch_queue);
-        w &= ~(0x1f);
-        w |= (dma_chan[lch_queue].next_linked_ch);
-        OMAP_DMA_CLNK_CTRL_REG(lch_queue) = w;
+        l = dma_read(CLNK_CTRL(lch_queue));
+        l &= ~(0x1f);
+        l |= (dma_chan[lch_queue].next_linked_ch);
+        dma_write(l, CLNK_CTRL(lch_queue));
 }
 
 /**
@@ -1061,7 +1217,7 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
         }
 
         if (unlikely((no_of_chans < 1
-                        || no_of_chans > OMAP_LOGICAL_DMA_CH_COUNT))) {
+                        || no_of_chans > dma_lch_count))) {
                 printk(KERN_ERR "Invalid Number of channels requested\n");
                 return -EINVAL;
         }
@@ -1116,6 +1272,7 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
                 for (i = 0; i < (no_of_chans - 1); i++)
                         create_dma_lch_chain(channels[i], channels[i + 1]);
         }
+
         return 0;
 }
 EXPORT_SYMBOL(omap_request_dma_chain);
@@ -1138,7 +1295,7 @@ int omap_modify_dma_chain_params(int chain_id,
 
         /* Check for input params */
         if (unlikely((chain_id < 0
-                        || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+                        || chain_id >= dma_lch_count))) {
                 printk(KERN_ERR "Invalid chain id\n");
                 return -EINVAL;
         }
@@ -1158,6 +1315,7 @@ int omap_modify_dma_chain_params(int chain_id,
                  */
                 omap_set_dma_params(channels[i], &params);
         }
+
         return 0;
 }
 EXPORT_SYMBOL(omap_modify_dma_chain_params);
@@ -1176,7 +1334,7 @@ int omap_free_dma_chain(int chain_id)
         u32 i;
 
         /* Check for input params */
-        if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+        if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
                 printk(KERN_ERR "Invalid chain id\n");
                 return -EINVAL;
         }
@@ -1201,6 +1359,7 @@ int omap_free_dma_chain(int chain_id)
         dma_linked_lch[chain_id].linked_dmach_q = NULL;
         dma_linked_lch[chain_id].chain_mode = -1;
         dma_linked_lch[chain_id].chain_state = -1;
+
         return (0);
 }
 EXPORT_SYMBOL(omap_free_dma_chain);
@@ -1216,7 +1375,7 @@ EXPORT_SYMBOL(omap_free_dma_chain);
 int omap_dma_chain_status(int chain_id)
 {
         /* Check for input params */
-        if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+        if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
                 printk(KERN_ERR "Invalid chain id\n");
                 return -EINVAL;
         }
@@ -1231,6 +1390,7 @@ int omap_dma_chain_status(int chain_id)
 
         if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
                 return OMAP_DMA_CHAIN_INACTIVE;
+
         return OMAP_DMA_CHAIN_ACTIVE;
 }
 EXPORT_SYMBOL(omap_dma_chain_status);
@@ -1253,11 +1413,13 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
                         int elem_count, int frame_count, void *callbk_data)
 {
         int *channels;
-        u32 w, lch;
+        u32 l, lch;
         int start_dma = 0;
 
-        /* if buffer size is less than 1 then there is
-         * no use of starting the chain */
+        /*
+         * if buffer size is less than 1 then there is
+         * no use of starting the chain
+         */
         if (elem_count < 1) {
                 printk(KERN_ERR "Invalid buffer size\n");
                 return -EINVAL;
@@ -1265,7 +1427,7 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 
         /* Check for input params */
         if (unlikely((chain_id < 0
-                        || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+                        || chain_id >= dma_lch_count))) {
                 printk(KERN_ERR "Invalid chain id\n");
                 return -EINVAL;
         }
@@ -1294,20 +1456,24 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 
         /* Set the params to the free channel */
         if (src_start != 0)
-                OMAP2_DMA_CSSA_REG(lch) = src_start;
+                dma_write(src_start, CSSA(lch));
         if (dest_start != 0)
-                OMAP2_DMA_CDSA_REG(lch) = dest_start;
+                dma_write(dest_start, CDSA(lch));
 
         /* Write the buffer size */
-        OMAP_DMA_CEN_REG(lch) = elem_count;
-        OMAP_DMA_CFN_REG(lch) = frame_count;
+        dma_write(elem_count, CEN(lch));
+        dma_write(frame_count, CFN(lch));
 
-        /* If the chain is dynamically linked,
-         * then we may have to start the chain if its not active */
+        /*
+         * If the chain is dynamically linked,
+         * then we may have to start the chain if its not active
+         */
         if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {
 
-                /* In Dynamic chain, if the chain is not started,
-                 * queue the channel */
+                /*
+                 * In Dynamic chain, if the chain is not started,
+                 * queue the channel
+                 */
                 if (dma_linked_lch[chain_id].chain_state ==
                                                 DMA_CHAIN_NOTSTARTED) {
                         /* Enable the link in previous channel */
@@ -1317,8 +1483,10 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
                         dma_chan[lch].state = DMA_CH_QUEUED;
                 }
 
-                /* Chain is already started, make sure its active,
-                 * if not then start the chain */
+                /*
+                 * Chain is already started, make sure its active,
+                 * if not then start the chain
+                 */
                 else {
                         start_dma = 1;
 
@@ -1327,8 +1495,8 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
                                 enable_lnk(dma_chan[lch].prev_linked_ch);
                                 dma_chan[lch].state = DMA_CH_QUEUED;
                                 start_dma = 0;
-                                if (0 == ((1 << 7) & (OMAP_DMA_CCR_REG
-                                        (dma_chan[lch].prev_linked_ch)))) {
+                                if (0 == ((1 << 7) & dma_read(
+                                        CCR(dma_chan[lch].prev_linked_ch)))) {
                                         disable_lnk(dma_chan[lch].
                                                     prev_linked_ch);
                                         pr_debug("\n prev ch is stopped\n");
@@ -1344,27 +1512,28 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
                         }
                         omap_enable_channel_irq(lch);
 
-                        w = OMAP_DMA_CCR_REG(lch);
+                        l = dma_read(CCR(lch));
 
-                        if ((0 == (w & (1 << 24))))
-                                w &= ~(1 << 25);
+                        if ((0 == (l & (1 << 24))))
+                                l &= ~(1 << 25);
                         else
-                                w |= (1 << 25);
+                                l |= (1 << 25);
                         if (start_dma == 1) {
-                                if (0 == (w & (1 << 7))) {
-                                        w |= (1 << 7);
+                                if (0 == (l & (1 << 7))) {
+                                        l |= (1 << 7);
                                         dma_chan[lch].state = DMA_CH_STARTED;
                                         pr_debug("starting %d\n", lch);
-                                        OMAP_DMA_CCR_REG(lch) = w;
+                                        dma_write(l, CCR(lch));
                                 } else
                                         start_dma = 0;
                         } else {
-                                if (0 == (w & (1 << 7)))
-                                        OMAP_DMA_CCR_REG(lch) = w;
+                                if (0 == (l & (1 << 7)))
+                                        dma_write(l, CCR(lch));
                         }
                         dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
                 }
         }
+
         return 0;
 }
 EXPORT_SYMBOL(omap_dma_chain_a_transfer);
@@ -1380,9 +1549,9 @@ EXPORT_SYMBOL(omap_dma_chain_a_transfer);
 int omap_start_dma_chain_transfers(int chain_id)
 {
         int *channels;
-        u32 w, i;
+        u32 l, i;
 
-        if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+        if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
                 printk(KERN_ERR "Invalid chain id\n");
                 return -EINVAL;
         }
@@ -1404,18 +1573,19 @@ int omap_start_dma_chain_transfers(int chain_id)
                 omap_enable_channel_irq(channels[0]);
         }
 
-        w = OMAP_DMA_CCR_REG(channels[0]);
-        w |= (1 << 7);
+        l = dma_read(CCR(channels[0]));
+        l |= (1 << 7);
         dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
         dma_chan[channels[0]].state = DMA_CH_STARTED;
 
-        if ((0 == (w & (1 << 24))))
-                w &= ~(1 << 25);
+        if ((0 == (l & (1 << 24))))
+                l &= ~(1 << 25);
         else
-                w |= (1 << 25);
-        OMAP_DMA_CCR_REG(channels[0]) = w;
+                l |= (1 << 25);
+        dma_write(l, CCR(channels[0]));
 
         dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
+
         return 0;
 }
 EXPORT_SYMBOL(omap_start_dma_chain_transfers);
@@ -1431,11 +1601,11 @@ EXPORT_SYMBOL(omap_start_dma_chain_transfers);
 int omap_stop_dma_chain_transfers(int chain_id)
 {
         int *channels;
-        u32 w, i;
+        u32 l, i;
         u32 sys_cf;
 
         /* Check for input params */
-        if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+        if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
                 printk(KERN_ERR "Invalid chain id\n");
                 return -EINVAL;
         }
@@ -1447,21 +1617,22 @@ int omap_stop_dma_chain_transfers(int chain_id)
         }
         channels = dma_linked_lch[chain_id].linked_dmach_q;
 
-        /* DMA Errata:
+        /*
+         * DMA Errata:
          * Special programming model needed to disable DMA before end of block
          */
-        sys_cf = omap_readl(OMAP_DMA4_OCP_SYSCONFIG);
-        w = sys_cf;
+        sys_cf = dma_read(OCP_SYSCONFIG);
+        l = sys_cf;
         /* Middle mode reg set no Standby */
-        w &= ~((1 << 12)|(1 << 13));
-        omap_writel(w, OMAP_DMA4_OCP_SYSCONFIG);
+        l &= ~((1 << 12)|(1 << 13));
+        dma_write(l, OCP_SYSCONFIG);
 
         for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
 
                 /* Stop the Channel transmission */
-                w = OMAP_DMA_CCR_REG(channels[i]);
-                w &= ~(1 << 7);
-                OMAP_DMA_CCR_REG(channels[i]) = w;
+                l = dma_read(CCR(channels[i]));
+                l &= ~(1 << 7);
+                dma_write(l, CCR(channels[i]));
 
                 /* Disable the link in all the channels */
                 disable_lnk(channels[i]);
@@ -1474,7 +1645,8 @@ int omap_stop_dma_chain_transfers(int chain_id)
         OMAP_DMA_CHAIN_QINIT(chain_id);
 
         /* Errata - put in the old value */
-        omap_writel(sys_cf, OMAP_DMA4_OCP_SYSCONFIG);
+        dma_write(sys_cf, OCP_SYSCONFIG);
+
         return 0;
 }
 EXPORT_SYMBOL(omap_stop_dma_chain_transfers);
@@ -1497,7 +1669,7 @@ int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
         int *channels;
 
         /* Check for input params */
-        if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+        if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
                 printk(KERN_ERR "Invalid chain id\n");
                 return -EINVAL;
         }
@@ -1515,8 +1687,8 @@ int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
         /* Get the current channel */
         lch = channels[dma_linked_lch[chain_id].q_head];
 
-        *ei = OMAP2_DMA_CCEN_REG(lch);
-        *fi = OMAP2_DMA_CCFN_REG(lch);
+        *ei = dma_read(CCEN(lch));
+        *fi = dma_read(CCFN(lch));
 
         return 0;
 }
@@ -1537,7 +1709,7 @@ int omap_get_dma_chain_dst_pos(int chain_id)
         int *channels;
 
         /* Check for input params */
-        if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+        if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
                 printk(KERN_ERR "Invalid chain id\n");
                 return -EINVAL;
         }
@@ -1553,7 +1725,7 @@ int omap_get_dma_chain_dst_pos(int chain_id)
         /* Get the current channel */
         lch = channels[dma_linked_lch[chain_id].q_head];
 
-        return (OMAP_DMA_CDAC_REG(lch));
+        return dma_read(CDAC(lch));
 }
 EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
 
@@ -1571,7 +1743,7 @@ int omap_get_dma_chain_src_pos(int chain_id)
         int *channels;
 
         /* Check for input params */
-        if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
+        if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
                 printk(KERN_ERR "Invalid chain id\n");
                 return -EINVAL;
         }
@@ -1587,10 +1759,10 @@ int omap_get_dma_chain_src_pos(int chain_id)
         /* Get the current channel */
         lch = channels[dma_linked_lch[chain_id].q_head];
 
-        return (OMAP_DMA_CSAC_REG(lch));
+        return dma_read(CSAC(lch));
 }
 EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
-#endif
+#endif  /* ifndef CONFIG_ARCH_OMAP1 */
 
 /*----------------------------------------------------------------------------*/
 
@@ -1598,13 +1770,13 @@ EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
 
 static int omap1_dma_handle_ch(int ch)
 {
-        u16 csr;
+        u32 csr;
 
         if (enable_1510_mode && ch >= 6) {
                 csr = dma_chan[ch].saved_csr;
                 dma_chan[ch].saved_csr = 0;
         } else
-                csr = OMAP_DMA_CSR_REG(ch);
+                csr = dma_read(CSR(ch));
         if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
                 dma_chan[ch + 6].saved_csr = csr >> 7;
                 csr &= 0x7f;
@@ -1626,6 +1798,7 @@ static int omap1_dma_handle_ch(int ch)
                 dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
         if (likely(dma_chan[ch].callback != NULL))
                 dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
+
         return 1;
 }
 
@@ -1656,12 +1829,13 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 
 static int omap2_dma_handle_ch(int ch)
 {
-        u32 status = OMAP_DMA_CSR_REG(ch);
+        u32 status = dma_read(CSR(ch));
 
         if (!status) {
                 if (printk_ratelimit())
-                        printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n", ch);
-                omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
+                        printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
+                                ch);
+                dma_write(1 << ch, IRQSTATUS_L0);
                 return 0;
         }
         if (unlikely(dma_chan[ch].dev_id == -1)) {
@@ -1684,14 +1858,14 @@ static int omap2_dma_handle_ch(int ch)
                 printk(KERN_INFO "DMA misaligned error with device %d\n",
                        dma_chan[ch].dev_id);
 
-        OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
-        omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
+        dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
+        dma_write(1 << ch, IRQSTATUS_L0);
 
         /* If the ch is not chained then chain_id will be -1 */
         if (dma_chan[ch].chain_id != -1) {
                 int chain_id = dma_chan[ch].chain_id;
                 dma_chan[ch].state = DMA_CH_NOTSTARTED;
-                if (OMAP_DMA_CLNK_CTRL_REG(ch) & (1 << 15))
+                if (dma_read(CLNK_CTRL(ch)) & (1 << 15))
                         dma_chan[dma_chan[ch].next_linked_ch].state =
                                                         DMA_CH_STARTED;
                 if (dma_linked_lch[chain_id].chain_mode ==
@@ -1701,13 +1875,13 @@ static int omap2_dma_handle_ch(int ch)
                 if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
                         OMAP_DMA_CHAIN_INCQHEAD(chain_id);
 
-                status = OMAP_DMA_CSR_REG(ch);
+                status = dma_read(CSR(ch));
         }
 
         if (likely(dma_chan[ch].callback != NULL))
                 dma_chan[ch].callback(ch, status, dma_chan[ch].data);
 
-        OMAP_DMA_CSR_REG(ch) = status;
+        dma_write(status, CSR(ch));
 
         return 0;
 }
@@ -1718,13 +1892,13 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
         u32 val;
         int i;
 
-        val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
+        val = dma_read(IRQSTATUS_L0);
         if (val == 0) {
                 if (printk_ratelimit())
                         printk(KERN_WARNING "Spurious DMA IRQ\n");
                 return IRQ_HANDLED;
         }
-        for (i = 0; i < OMAP_LOGICAL_DMA_CH_COUNT && val != 0; i++) {
+        for (i = 0; i < dma_lch_count && val != 0; i++) {
                 if (val & 1)
                         omap2_dma_handle_ch(i);
                 val >>= 1;
@@ -1748,7 +1922,7 @@ static struct irqaction omap24xx_dma_irq;
 static struct lcd_dma_info {
         spinlock_t lock;
         int reserved;
-        void (* callback)(u16 status, void *data);
+        void (*callback)(u16 status, void *data);
         void *cb_data;
 
         int active;
@@ -1770,6 +1944,7 @@ void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
         lcd_dma.xres = fb_xres;
         lcd_dma.yres = fb_yres;
 }
+EXPORT_SYMBOL(omap_set_lcd_dma_b1);
 
 void omap_set_lcd_dma_src_port(int port)
 {
@@ -1780,12 +1955,13 @@ void omap_set_lcd_dma_ext_controller(int external)
 {
         lcd_dma.ext_ctrl = external;
 }
+EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
 
 void omap_set_lcd_dma_single_transfer(int single)
 {
         lcd_dma.single_transfer = single;
 }
-
+EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
 
 void omap_set_lcd_dma_b1_rotation(int rotate)
 {
@@ -1796,6 +1972,7 @@ void omap_set_lcd_dma_b1_rotation(int rotate)
         }
         lcd_dma.rotate = rotate;
 }
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
 
 void omap_set_lcd_dma_b1_mirror(int mirror)
 {
@@ -1805,6 +1982,7 @@ void omap_set_lcd_dma_b1_mirror(int mirror)
         }
         lcd_dma.mirror = mirror;
 }
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 
 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 {
@@ -1815,6 +1993,7 @@ void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
         }
         lcd_dma.vxres = vxres;
 }
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
 
 void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
 {
@@ -1825,6 +2004,7 @@ void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
         lcd_dma.xscale = xscale;
         lcd_dma.yscale = yscale;
 }
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
 
 static void set_b1_regs(void)
 {
@@ -1855,8 +2035,11 @@ static void set_b1_regs(void)
         xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
         yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
         BUG_ON(vxres < lcd_dma.xres);
-#define PIXADDR(x,y) (lcd_dma.addr + ((y) * vxres * yscale + (x) * xscale) * es)
+
+#define PIXADDR(x, y) (lcd_dma.addr +                                   \
+                ((y) * vxres * yscale + (x) * xscale) * es)
 #define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
+
         switch (lcd_dma.rotate) {
         case 0:
                 if (!lcd_dma.mirror) {
@@ -1865,8 +2048,8 @@ static void set_b1_regs(void)
                         /* 1510 DMA requires the bottom address to be 2 more
                          * than the actual last memory access location. */
                         if (omap_dma_in_1510_mode() &&
-                            lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
-                                bottom += 2;
+                                lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
+                                        bottom += 2;
                         ei = PIXSTEP(0, 0, 1, 0);
                         fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
                 } else {
@@ -1993,7 +2176,7 @@ static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
         return IRQ_HANDLED;
 }
 
-int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
+int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
                          void *data)
 {
         spin_lock_irq(&lcd_dma.lock);
@@ -2019,6 +2202,7 @@ int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
 
         return 0;
 }
+EXPORT_SYMBOL(omap_request_lcd_dma);
 
 void omap_free_lcd_dma(void)
 {
@@ -2035,12 +2219,14 @@ void omap_free_lcd_dma(void)
         lcd_dma.reserved = 0;
         spin_unlock(&lcd_dma.lock);
 }
+EXPORT_SYMBOL(omap_free_lcd_dma);
 
 void omap_enable_lcd_dma(void)
 {
         u16 w;
 
-        /* Set the Enable bit only if an external controller is
+        /*
+         * Set the Enable bit only if an external controller is
          * connected. Otherwise the OMAP internal controller will
          * start the transfer when it gets enabled.
          */
@@ -2057,6 +2243,7 @@ void omap_enable_lcd_dma(void)
         w |= 1 << 7;
         omap_writew(w, OMAP1610_DMA_LCD_CCR);
 }
+EXPORT_SYMBOL(omap_enable_lcd_dma);
 
 void omap_setup_lcd_dma(void)
 {
@@ -2072,16 +2259,18 @@ void omap_setup_lcd_dma(void)
                 u16 w;
 
                 w = omap_readw(OMAP1610_DMA_LCD_CCR);
-                /* If DMA was already active set the end_prog bit to have
+                /*
+                 * If DMA was already active set the end_prog bit to have
                  * the programmed register set loaded into the active
                  * register set.
                  */
                 w |= 1 << 11;           /* End_prog */
                 if (!lcd_dma.single_transfer)
-                        w |= (3 << 8);  /* Auto_init, repeat */
+                        w |= (3 << 8);  /* Auto_init, repeat */
                 omap_writew(w, OMAP1610_DMA_LCD_CCR);
         }
 }
+EXPORT_SYMBOL(omap_setup_lcd_dma);
 
 void omap_stop_lcd_dma(void)
 {
@@ -2099,6 +2288,7 @@ void omap_stop_lcd_dma(void)
         w &= ~(1 << 8);
         omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 }
+EXPORT_SYMBOL(omap_stop_lcd_dma);
 
 /*----------------------------------------------------------------------------*/
 
@@ -2106,27 +2296,55 @@ static int __init omap_init_dma(void)
 {
         int ch, r;
 
+        if (cpu_class_is_omap1()) {
+                omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP1_DMA_BASE);
+                dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
+        } else if (cpu_is_omap24xx()) {
+                omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP24XX_DMA4_BASE);
+                dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+        } else if (cpu_is_omap34xx()) {
+                omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP34XX_DMA4_BASE);
+                dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+        } else {
+                pr_err("DMA init failed for unsupported omap\n");
+                return -ENODEV;
+        }
+
+        dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
+                                GFP_KERNEL);
+        if (!dma_chan)
+                return -ENOMEM;
+
+        if (cpu_class_is_omap2()) {
+                dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
+                                                dma_lch_count, GFP_KERNEL);
+                if (!dma_linked_lch) {
+                        kfree(dma_chan);
+                        return -ENOMEM;
+                }
+        }
+
         if (cpu_is_omap15xx()) {
                 printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
                 dma_chan_count = 9;
                 enable_1510_mode = 1;
         } else if (cpu_is_omap16xx() || cpu_is_omap730()) {
                 printk(KERN_INFO "OMAP DMA hardware version %d\n",
-                       omap_readw(OMAP_DMA_HW_ID));
+                       dma_read(HW_ID));
                 printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
-                       (omap_readw(OMAP_DMA_CAPS_0_U) << 16) |
-                       omap_readw(OMAP_DMA_CAPS_0_L),
-                       (omap_readw(OMAP_DMA_CAPS_1_U) << 16) |
-                       omap_readw(OMAP_DMA_CAPS_1_L),
-                       omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3),
-                       omap_readw(OMAP_DMA_CAPS_4));
+                       (dma_read(CAPS_0_U) << 16) |
+                       dma_read(CAPS_0_L),
+                       (dma_read(CAPS_1_U) << 16) |
+                       dma_read(CAPS_1_L),
+                       dma_read(CAPS_2), dma_read(CAPS_3),
+                       dma_read(CAPS_4));
                 if (!enable_1510_mode) {
                         u16 w;
 
                         /* Disable OMAP 3.0/3.1 compatibility mode. */
-                        w = omap_readw(OMAP_DMA_GSCR);
+                        w = dma_read(GSCR);
                         w |= 1 << 3;
-                        omap_writew(w, OMAP_DMA_GSCR);
+                        dma_write(w, GSCR);
                         dma_chan_count = 16;
                 } else
                         dma_chan_count = 9;
@@ -2139,19 +2357,17 @@ static int __init omap_init_dma(void)
                         omap_writew(w, OMAP1610_DMA_LCD_CTRL);
                 }
         } else if (cpu_class_is_omap2()) {
-                u8 revision = omap_readb(OMAP_DMA4_REVISION);
+                u8 revision = dma_read(REVISION) & 0xff;
                 printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
                        revision >> 4, revision & 0xf);
-                dma_chan_count = OMAP_LOGICAL_DMA_CH_COUNT;
+                dma_chan_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
         } else {
                 dma_chan_count = 0;
                 return 0;
         }
 
-        memset(&lcd_dma, 0, sizeof(lcd_dma));
         spin_lock_init(&lcd_dma.lock);
         spin_lock_init(&dma_chan_lock);
-        memset(&dma_chan, 0, sizeof(dma_chan));
 
         for (ch = 0; ch < dma_chan_count; ch++) {
                 omap_clear_dma(ch);
@@ -2162,8 +2378,10 @@ static int __init omap_init_dma(void)
                         continue;
 
                 if (cpu_class_is_omap1()) {
-                        /* request_irq() doesn't like dev_id (ie. ch) being
-                         * zero, so we have to kludge around this. */
+                        /*
+                         * request_irq() doesn't like dev_id (ie. ch) being
+                         * zero, so we have to kludge around this.
+                         */
                         r = request_irq(omap1_dma_irq[ch],
                                         omap1_dma_irq_handler, 0, "DMA",
                                         (void *) (ch + 1));
@@ -2208,48 +2426,4 @@ static int __init omap_init_dma(void)
 
 arch_initcall(omap_init_dma);
 
-EXPORT_SYMBOL(omap_get_dma_src_pos);
-EXPORT_SYMBOL(omap_get_dma_dst_pos);
-EXPORT_SYMBOL(omap_get_dma_src_addr_counter);
-EXPORT_SYMBOL(omap_clear_dma);
-EXPORT_SYMBOL(omap_set_dma_priority);
-EXPORT_SYMBOL(omap_request_dma);
-EXPORT_SYMBOL(omap_free_dma);
-EXPORT_SYMBOL(omap_start_dma);
-EXPORT_SYMBOL(omap_stop_dma);
-EXPORT_SYMBOL(omap_set_dma_callback);
-EXPORT_SYMBOL(omap_enable_dma_irq);
-EXPORT_SYMBOL(omap_disable_dma_irq);
-
-EXPORT_SYMBOL(omap_set_dma_transfer_params);
-EXPORT_SYMBOL(omap_set_dma_color_mode);
-EXPORT_SYMBOL(omap_set_dma_write_mode);
-
-EXPORT_SYMBOL(omap_set_dma_src_params);
-EXPORT_SYMBOL(omap_set_dma_src_index);
-EXPORT_SYMBOL(omap_set_dma_src_data_pack);
-EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
-
-EXPORT_SYMBOL(omap_set_dma_dest_params);
-EXPORT_SYMBOL(omap_set_dma_dest_index);
-EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
-EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
-
-EXPORT_SYMBOL(omap_set_dma_params);
-
-EXPORT_SYMBOL(omap_dma_link_lch);
-EXPORT_SYMBOL(omap_dma_unlink_lch);
-
-EXPORT_SYMBOL(omap_request_lcd_dma);
-EXPORT_SYMBOL(omap_free_lcd_dma);
-EXPORT_SYMBOL(omap_enable_lcd_dma);
-EXPORT_SYMBOL(omap_setup_lcd_dma);
-EXPORT_SYMBOL(omap_stop_lcd_dma);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1);
-EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
-EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 302ad8dff2cb..f22506af0e67 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -38,34 +38,113 @@
 #include <asm/arch/irqs.h>
 
 /* register offsets */
-#define OMAP_TIMER_ID_REG               0x00
-#define OMAP_TIMER_OCP_CFG_REG          0x10
-#define OMAP_TIMER_SYS_STAT_REG         0x14
-#define OMAP_TIMER_STAT_REG             0x18
-#define OMAP_TIMER_INT_EN_REG           0x1c
-#define OMAP_TIMER_WAKEUP_EN_REG        0x20
-#define OMAP_TIMER_CTRL_REG             0x24
-#define OMAP_TIMER_COUNTER_REG          0x28
-#define OMAP_TIMER_LOAD_REG             0x2c
-#define OMAP_TIMER_TRIGGER_REG          0x30
-#define OMAP_TIMER_WRITE_PEND_REG       0x34
-#define OMAP_TIMER_MATCH_REG            0x38
-#define OMAP_TIMER_CAPTURE_REG          0x3c
-#define OMAP_TIMER_IF_CTRL_REG          0x40
-
-/* timer control reg bits */
-#define OMAP_TIMER_CTRL_GPOCFG          (1 << 14)
-#define OMAP_TIMER_CTRL_CAPTMODE        (1 << 13)
-#define OMAP_TIMER_CTRL_PT              (1 << 12)
-#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH   (0x1 << 8)
-#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW   (0x2 << 8)
-#define OMAP_TIMER_CTRL_TCM_BOTHEDGES   (0x3 << 8)
-#define OMAP_TIMER_CTRL_SCPWM           (1 << 7)
-#define OMAP_TIMER_CTRL_CE              (1 << 6)        /* compare enable */
-#define OMAP_TIMER_CTRL_PRE             (1 << 5)        /* prescaler enable */
-#define OMAP_TIMER_CTRL_PTV_SHIFT       2               /* how much to shift the prescaler value */
-#define OMAP_TIMER_CTRL_AR              (1 << 1)        /* auto-reload enable */
-#define OMAP_TIMER_CTRL_ST              (1 << 0)        /* start timer */
+#define _OMAP_TIMER_ID_OFFSET           0x00
+#define _OMAP_TIMER_OCP_CFG_OFFSET      0x10
+#define _OMAP_TIMER_SYS_STAT_OFFSET     0x14
+#define _OMAP_TIMER_STAT_OFFSET         0x18
+#define _OMAP_TIMER_INT_EN_OFFSET       0x1c
+#define _OMAP_TIMER_WAKEUP_EN_OFFSET    0x20
+#define _OMAP_TIMER_CTRL_OFFSET         0x24
+#define         OMAP_TIMER_CTRL_GPOCFG          (1 << 14)
+#define         OMAP_TIMER_CTRL_CAPTMODE        (1 << 13)
+#define         OMAP_TIMER_CTRL_PT              (1 << 12)
+#define         OMAP_TIMER_CTRL_TCM_LOWTOHIGH   (0x1 << 8)
+#define         OMAP_TIMER_CTRL_TCM_HIGHTOLOW   (0x2 << 8)
+#define         OMAP_TIMER_CTRL_TCM_BOTHEDGES   (0x3 << 8)
+#define         OMAP_TIMER_CTRL_SCPWM           (1 << 7)
+#define         OMAP_TIMER_CTRL_CE              (1 << 6) /* compare enable */
+#define         OMAP_TIMER_CTRL_PRE             (1 << 5) /* prescaler enable */
+#define         OMAP_TIMER_CTRL_PTV_SHIFT       2 /* prescaler value shift */
+#define         OMAP_TIMER_CTRL_POSTED          (1 << 2)
+#define         OMAP_TIMER_CTRL_AR              (1 << 1) /* auto-reload enable */
+#define         OMAP_TIMER_CTRL_ST              (1 << 0) /* start timer */
+#define _OMAP_TIMER_COUNTER_OFFSET      0x28
+#define _OMAP_TIMER_LOAD_OFFSET         0x2c
+#define _OMAP_TIMER_TRIGGER_OFFSET      0x30
+#define _OMAP_TIMER_WRITE_PEND_OFFSET   0x34
+#define         WP_NONE                 0       /* no write pending bit */
+#define         WP_TCLR                 (1 << 0)
+#define         WP_TCRR                 (1 << 1)
+#define         WP_TLDR                 (1 << 2)
+#define         WP_TTGR                 (1 << 3)
+#define         WP_TMAR                 (1 << 4)
+#define         WP_TPIR                 (1 << 5)
+#define         WP_TNIR                 (1 << 6)
+#define         WP_TCVR                 (1 << 7)
+#define         WP_TOCR                 (1 << 8)
+#define         WP_TOWR                 (1 << 9)
+#define _OMAP_TIMER_MATCH_OFFSET        0x38
+#define _OMAP_TIMER_CAPTURE_OFFSET      0x3c
+#define _OMAP_TIMER_IF_CTRL_OFFSET      0x40
+#define _OMAP_TIMER_CAPTURE2_OFFSET             0x44    /* TCAR2, 34xx only */
+#define _OMAP_TIMER_TICK_POS_OFFSET             0x48    /* TPIR, 34xx only */
+#define _OMAP_TIMER_TICK_NEG_OFFSET             0x4c    /* TNIR, 34xx only */
+#define _OMAP_TIMER_TICK_COUNT_OFFSET           0x50    /* TCVR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET    0x54    /* TOCR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET  0x58    /* TOWR, 34xx only */
+
+/* register offsets with the write pending bit encoded */
+#define WPSHIFT                                 16
+
+#define OMAP_TIMER_ID_REG                       (_OMAP_TIMER_ID_OFFSET \
+                                                        | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_OCP_CFG_REG                  (_OMAP_TIMER_OCP_CFG_OFFSET \
+                                                        | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_SYS_STAT_REG                 (_OMAP_TIMER_SYS_STAT_OFFSET \
+                                                        | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_STAT_REG                     (_OMAP_TIMER_STAT_OFFSET \
+                                                        | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_INT_EN_REG                   (_OMAP_TIMER_INT_EN_OFFSET \
+                                                        | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_WAKEUP_EN_REG                (_OMAP_TIMER_WAKEUP_EN_OFFSET \
+                                                        | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CTRL_REG                     (_OMAP_TIMER_CTRL_OFFSET \
+                                                        | (WP_TCLR << WPSHIFT))
+
+#define OMAP_TIMER_COUNTER_REG                  (_OMAP_TIMER_COUNTER_OFFSET \
+                                                        | (WP_TCRR << WPSHIFT))
+
+#define OMAP_TIMER_LOAD_REG                     (_OMAP_TIMER_LOAD_OFFSET \
+                                                        | (WP_TLDR << WPSHIFT))
+
+#define OMAP_TIMER_TRIGGER_REG                  (_OMAP_TIMER_TRIGGER_OFFSET \
+                                                        | (WP_TTGR << WPSHIFT))
+
+#define OMAP_TIMER_WRITE_PEND_REG               (_OMAP_TIMER_WRITE_PEND_OFFSET \
+                                                        | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_MATCH_REG                    (_OMAP_TIMER_MATCH_OFFSET \
+                                                        | (WP_TMAR << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE_REG                  (_OMAP_TIMER_CAPTURE_OFFSET \
+                                                        | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_IF_CTRL_REG                  (_OMAP_TIMER_IF_CTRL_OFFSET \
+                                                        | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE2_REG                 (_OMAP_TIMER_CAPTURE2_OFFSET \
+                                                        | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_TICK_POS_REG                 (_OMAP_TIMER_TICK_POS_OFFSET \
+                                                        | (WP_TPIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_NEG_REG                 (_OMAP_TIMER_TICK_NEG_OFFSET \
+                                                        | (WP_TNIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_COUNT_REG               (_OMAP_TIMER_TICK_COUNT_OFFSET \
+                                                        | (WP_TCVR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_SET_REG                                \
+                (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG                              \
+                (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
 
 struct omap_dm_timer {
         unsigned long phys_base;
@@ -76,6 +155,7 @@ struct omap_dm_timer {
         void __iomem *io_base;
         unsigned reserved:1;
         unsigned enabled:1;
+        unsigned posted:1;
 };
 
 #ifdef CONFIG_ARCH_OMAP1
@@ -181,16 +261,34 @@ static struct clk **dm_source_clocks;
 
 static spinlock_t dm_timer_lock;
 
-static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
+/*
+ * Reads timer registers in posted and non-posted mode. The posted mode bit
+ * is encoded in reg. Note that in posted mode write pending bit must be
+ * checked. Otherwise a read of a non completed write will produce an error.
+ */
+static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg)
 {
-        return readl(timer->io_base + reg);
+        if (timer->posted)
+                while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
+                                & (reg >> WPSHIFT))
+                        cpu_relax();
+        return readl(timer->io_base + (reg & 0xff));
 }
 
-static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
+/*
+ * Writes timer registers in posted and non-posted mode. The posted mode bit
+ * is encoded in reg. Note that in posted mode the write pending bit must be
+ * checked. Otherwise a write on a register which has a pending write will be
+ * lost.
+ */
+static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
+                                                u32 value)
 {
-        writel(value, timer->io_base + reg);
-        while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG))
-                ;
+        if (timer->posted)
+                while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
+                                & (reg >> WPSHIFT))
+                        cpu_relax();
+        writel(value, timer->io_base + (reg & 0xff));
 }
 
 static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
@@ -217,17 +315,23 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
         }
         omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
 
-        /* Set to smart-idle mode */
         l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
-        l |= 0x02 << 3;
-
-        if (cpu_class_is_omap2() && timer == &dm_timers[0]) {
-                /* Enable wake-up only for GPT1 on OMAP2 CPUs*/
+        l |= 0x02 << 3;  /* Set to smart-idle mode */
+        l |= 0x2 << 8;   /* Set clock activity to perserve f-clock on idle */
+
+        /*
+         * Enable wake-up only for GPT1 on OMAP2 CPUs.
+         * FIXME: All timers should have wake-up enabled and clear
+         * PRCM status.
+         */
+        if (cpu_class_is_omap2() && (timer == &dm_timers[0]))
                 l |= 1 << 2;
-                /* Non-posted mode */
-                omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0);
-        }
         omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
+
+        /* Match hardware reset default of posted mode */
+        omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
+                        OMAP_TIMER_CTRL_POSTED);
+        timer->posted = 1;
 }
 
 static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
@@ -434,9 +538,32 @@ void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
                 l &= ~OMAP_TIMER_CTRL_AR;
         omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
         omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+
+        /* REVISIT: hw feature, ttgr overtaking tldr? */
+        while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)))
+                cpu_relax();
+
         omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 }
 
+/* Optimized set_load which removes costly spin wait in timer_start */
+void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
+                            unsigned int load)
+{
+        u32 l;
+
+        l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+        if (autoreload)
+                l |= OMAP_TIMER_CTRL_AR;
+        else
+                l &= ~OMAP_TIMER_CTRL_AR;
+        l |= OMAP_TIMER_CTRL_ST;
+
+        omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load);
+        omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+        omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
 void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
                              unsigned int match)
 {
@@ -451,7 +578,6 @@ void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
         omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
 }
 
-
 void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
                            int toggle, int trigger)
 {
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 6f33f58bca45..ff1413eae0b8 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -334,7 +334,7 @@ static int omap_mbox_init(struct omap_mbox *mbox)
         }
 
         mbox->dev.class = &omap_mbox_class;
-        strlcpy(mbox->dev.bus_id, mbox->name, KOBJ_NAME_LEN);
+        dev_set_name(&mbox->dev, "%s", mbox->name);
         dev_set_drvdata(&mbox->dev, mbox);
 
         ret = device_register(&mbox->dev);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 9cf83c4da9fa..c7f74064696c 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -15,95 +15,66 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/wait.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/io.h>
 
 #include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/dsp_common.h>
 #include <asm/arch/mcbsp.h>
 
-#ifdef CONFIG_MCBSP_DEBUG
-#define DBG(x...)       printk(x)
-#else
-#define DBG(x...)                       do { } while (0)
-#endif
-
-struct omap_mcbsp {
-        u32                          io_base;
-        u8                           id;
-        u8                           free;
-        omap_mcbsp_word_length       rx_word_length;
-        omap_mcbsp_word_length       tx_word_length;
-
-        omap_mcbsp_io_type_t         io_type; /* IRQ or poll */
-        /* IRQ based TX/RX */
-        int                          rx_irq;
-        int                          tx_irq;
-
-        /* DMA stuff */
-        u8                           dma_rx_sync;
-        short                        dma_rx_lch;
-        u8                           dma_tx_sync;
-        short                        dma_tx_lch;
-
-        /* Completion queues */
-        struct completion            tx_irq_completion;
-        struct completion            rx_irq_completion;
-        struct completion            tx_dma_completion;
-        struct completion            rx_dma_completion;
-
-        spinlock_t                   lock;
-};
-
 static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
-#ifdef CONFIG_ARCH_OMAP1
-static struct clk *mcbsp_dsp_ck = 0;
-static struct clk *mcbsp_api_ck = 0;
-static struct clk *mcbsp_dspxor_ck = 0;
-#endif
-#ifdef CONFIG_ARCH_OMAP2
-static struct clk *mcbsp1_ick = 0;
-static struct clk *mcbsp1_fck = 0;
-static struct clk *mcbsp2_ick = 0;
-static struct clk *mcbsp2_fck = 0;
-#endif
+
+#define omap_mcbsp_check_valid_id(id)   (mcbsp[id].pdata && \
+                                        mcbsp[id].pdata->ops && \
+                                        mcbsp[id].pdata->ops->check && \
+                                        (mcbsp[id].pdata->ops->check(id) == 0))
 
 static void omap_mcbsp_dump_reg(u8 id)
 {
-        DBG("**** MCBSP%d regs ****\n", mcbsp[id].id);
-        DBG("DRR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2));
-        DBG("DRR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1));
-        DBG("DXR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2));
-        DBG("DXR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1));
-        DBG("SPCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2));
-        DBG("SPCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1));
-        DBG("RCR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2));
-        DBG("RCR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1));
-        DBG("XCR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2));
-        DBG("XCR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1));
-        DBG("SRGR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2));
-        DBG("SRGR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1));
-        DBG("PCR0:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0));
-        DBG("***********************\n");
+        dev_dbg(mcbsp[id].dev, "**** McBSP%d regs ****\n", mcbsp[id].id);
+        dev_dbg(mcbsp[id].dev, "DRR2:  0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2));
+        dev_dbg(mcbsp[id].dev, "DRR1:  0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1));
+        dev_dbg(mcbsp[id].dev, "DXR2:  0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2));
+        dev_dbg(mcbsp[id].dev, "DXR1:  0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1));
+        dev_dbg(mcbsp[id].dev, "SPCR2: 0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2));
+        dev_dbg(mcbsp[id].dev, "SPCR1: 0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1));
+        dev_dbg(mcbsp[id].dev, "RCR2:  0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2));
+        dev_dbg(mcbsp[id].dev, "RCR1:  0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1));
+        dev_dbg(mcbsp[id].dev, "XCR2:  0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2));
+        dev_dbg(mcbsp[id].dev, "XCR1:  0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1));
+        dev_dbg(mcbsp[id].dev, "SRGR2: 0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2));
+        dev_dbg(mcbsp[id].dev, "SRGR1: 0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1));
+        dev_dbg(mcbsp[id].dev, "PCR0:  0x%04x\n",
+                        OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0));
+        dev_dbg(mcbsp[id].dev, "***********************\n");
 }
 
 static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 {
         struct omap_mcbsp *mcbsp_tx = dev_id;
 
-        DBG("TX IRQ callback : 0x%x\n",
-            OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+        dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
+                OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
 
         complete(&mcbsp_tx->tx_irq_completion);
+
         return IRQ_HANDLED;
 }
 
@@ -111,10 +82,11 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 {
         struct omap_mcbsp *mcbsp_rx = dev_id;
 
-        DBG("RX IRQ callback : 0x%x\n",
-            OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+        dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
+                OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
 
         complete(&mcbsp_rx->rx_irq_completion);
+
         return IRQ_HANDLED;
 }
 
@@ -122,8 +94,8 @@ static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
 {
         struct omap_mcbsp *mcbsp_dma_tx = data;
 
-        DBG("TX DMA callback : 0x%x\n",
-            OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
+        dev_dbg(mcbsp_dma_tx->dev, "TX DMA callback : 0x%x\n",
+                OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
 
         /* We can free the channels */
         omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
@@ -136,8 +108,8 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
 {
         struct omap_mcbsp *mcbsp_dma_rx = data;
 
-        DBG("RX DMA callback : 0x%x\n",
-            OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
+        dev_dbg(mcbsp_dma_rx->dev, "RX DMA callback : 0x%x\n",
+                OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
 
         /* We can free the channels */
         omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
@@ -146,19 +118,24 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
         complete(&mcbsp_dma_rx->rx_dma_completion);
 }
 
-
 /*
  * omap_mcbsp_config simply write a config to the
  * appropriate McBSP.
  * You either call this function or set the McBSP registers
  * by yourself before calling omap_mcbsp_start().
  */
-
-void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config)
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 {
-        u32 io_base = mcbsp[id].io_base;
+        u32 io_base;
+
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+                return;
+        }
 
-        DBG("OMAP-McBSP: McBSP%d  io_base: 0x%8x\n", id+1, io_base);
+        io_base = mcbsp[id].io_base;
+        dev_dbg(mcbsp[id].dev, "Configuring McBSP%d  io_base: 0x%8x\n",
+                        mcbsp[id].id, io_base);
 
         /* We write the given config */
         OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2);
@@ -173,83 +150,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config
         OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
         OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
 }
-
-
-
-static int omap_mcbsp_check(unsigned int id)
-{
-        if (cpu_is_omap730()) {
-                if (id > OMAP_MAX_MCBSP_COUNT - 1) {
-                       printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
-                       return -1;
-                }
-                return 0;
-        }
-
-        if (cpu_is_omap15xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) {
-                if (id > OMAP_MAX_MCBSP_COUNT) {
-                        printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
-                        return -1;
-                }
-                return 0;
-        }
-
-        return -1;
-}
-
-#ifdef CONFIG_ARCH_OMAP1
-static void omap_mcbsp_dsp_request(void)
-{
-        if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
-                int ret;
-
-                ret = omap_dsp_request_mem();
-                if (ret < 0) {
-                        printk(KERN_ERR "Could not get dsp memory: %i\n", ret);
-                        return;
-                }
-
-                clk_enable(mcbsp_dsp_ck);
-                clk_enable(mcbsp_api_ck);
-
-                /* enable 12MHz clock to mcbsp 1 & 3 */
-                clk_enable(mcbsp_dspxor_ck);
-
-                /*
-                 * DSP external peripheral reset
-                 * FIXME: This should be moved to dsp code
-                 */
-                __raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1,
-                             DSP_RSTCT2);
-        }
-}
-
-static void omap_mcbsp_dsp_free(void)
-{
-        if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
-                omap_dsp_release_mem();
-                clk_disable(mcbsp_dspxor_ck);
-                clk_disable(mcbsp_dsp_ck);
-                clk_disable(mcbsp_api_ck);
-        }
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-static void omap2_mcbsp2_mux_setup(void)
-{
-        if (cpu_is_omap2420()) {
-                omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
-                omap_cfg_reg(R14_24XX_MCBSP2_FSX);
-                omap_cfg_reg(W15_24XX_MCBSP2_DR);
-                omap_cfg_reg(V15_24XX_MCBSP2_DX);
-                omap_cfg_reg(V14_24XX_GPIO117);
-        }
-        /*
-         * Need to add MUX settings for OMAP 2430 SDP
-         */
-}
-#endif
+EXPORT_SYMBOL(omap_mcbsp_config);
 
 /*
  * We can choose between IRQ based or polled IO.
@@ -257,13 +158,16 @@ static void omap2_mcbsp2_mux_setup(void)
  */
 int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type)
 {
-        if (omap_mcbsp_check(id) < 0)
-                return -EINVAL;
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+                return -ENODEV;
+        }
 
         spin_lock(&mcbsp[id].lock);
 
         if (!mcbsp[id].free) {
-                printk (KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n", id + 1);
+                dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n",
+                        mcbsp[id].id);
                 spin_unlock(&mcbsp[id].lock);
                 return -EINVAL;
         }
@@ -274,38 +178,26 @@ int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type)
 
         return 0;
 }
+EXPORT_SYMBOL(omap_mcbsp_set_io_type);
 
 int omap_mcbsp_request(unsigned int id)
 {
         int err;
 
-        if (omap_mcbsp_check(id) < 0)
-                return -EINVAL;
-
-#ifdef CONFIG_ARCH_OMAP1
-        /*
-         * On 1510, 1610 and 1710, McBSP1 and McBSP3
-         * are DSP public peripherals.
-         */
-        if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
-                omap_mcbsp_dsp_request();
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-        if (cpu_is_omap24xx()) {
-                if (id == OMAP_MCBSP1) {
-                        clk_enable(mcbsp1_ick);
-                        clk_enable(mcbsp1_fck);
-                } else {
-                        clk_enable(mcbsp2_ick);
-                        clk_enable(mcbsp2_fck);
-                }
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+                return -ENODEV;
         }
-#endif
+
+        if (mcbsp[id].pdata->ops->request)
+                mcbsp[id].pdata->ops->request(id);
+
+        clk_enable(mcbsp[id].clk);
 
         spin_lock(&mcbsp[id].lock);
         if (!mcbsp[id].free) {
-                printk (KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n", id + 1);
+                dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n",
+                        mcbsp[id].id);
                 spin_unlock(&mcbsp[id].lock);
                 return -1;
         }
@@ -315,24 +207,23 @@ int omap_mcbsp_request(unsigned int id)
 
         if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) {
                 /* We need to get IRQs here */
-                err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler, 0,
-                                  "McBSP",
-                                  (void *) (&mcbsp[id]));
+                err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler,
+                                        0, "McBSP", (void *) (&mcbsp[id]));
                 if (err != 0) {
-                        printk(KERN_ERR "OMAP-McBSP: Unable to request TX IRQ %d for McBSP%d\n",
-                               mcbsp[id].tx_irq, mcbsp[id].id);
+                        dev_err(mcbsp[id].dev, "Unable to request TX IRQ %d "
+                                        "for McBSP%d\n", mcbsp[id].tx_irq,
+                                        mcbsp[id].id);
                         return err;
                 }
 
                 init_completion(&(mcbsp[id].tx_irq_completion));
 
-
-                err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler, 0,
-                                  "McBSP",
-                                  (void *) (&mcbsp[id]));
+                err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler,
+                                        0, "McBSP", (void *) (&mcbsp[id]));
                 if (err != 0) {
-                        printk(KERN_ERR "OMAP-McBSP: Unable to request RX IRQ %d for McBSP%d\n",
-                               mcbsp[id].rx_irq, mcbsp[id].id);
+                        dev_err(mcbsp[id].dev, "Unable to request RX IRQ %d "
+                                        "for McBSP%d\n", mcbsp[id].rx_irq,
+                                        mcbsp[id].id);
                         free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
                         return err;
                 }
@@ -341,36 +232,25 @@ int omap_mcbsp_request(unsigned int id)
         }
 
         return 0;
-
 }
+EXPORT_SYMBOL(omap_mcbsp_request);
 
 void omap_mcbsp_free(unsigned int id)
 {
-        if (omap_mcbsp_check(id) < 0)
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
                 return;
-
-#ifdef CONFIG_ARCH_OMAP1
-        if (cpu_class_is_omap1()) {
-                if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
-                        omap_mcbsp_dsp_free();
         }
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-        if (cpu_is_omap24xx()) {
-                if (id == OMAP_MCBSP1) {
-                        clk_disable(mcbsp1_ick);
-                        clk_disable(mcbsp1_fck);
-                } else {
-                        clk_disable(mcbsp2_ick);
-                        clk_disable(mcbsp2_fck);
-                }
-        }
-#endif
+
+        if (mcbsp[id].pdata->ops->free)
+                mcbsp[id].pdata->ops->free(id);
+
+        clk_disable(mcbsp[id].clk);
 
         spin_lock(&mcbsp[id].lock);
         if (mcbsp[id].free) {
-                printk (KERN_ERR "OMAP-McBSP: McBSP%d was not reserved\n", id + 1);
+                dev_err(mcbsp[id].dev, "McBSP%d was not reserved\n",
+                        mcbsp[id].id);
                 spin_unlock(&mcbsp[id].lock);
                 return;
         }
@@ -384,6 +264,7 @@ void omap_mcbsp_free(unsigned int id)
                 free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
         }
 }
+EXPORT_SYMBOL(omap_mcbsp_free);
 
 /*
  * Here we start the McBSP, by enabling the sample
@@ -395,13 +276,15 @@ void omap_mcbsp_start(unsigned int id)
         u32 io_base;
         u16 w;
 
-        if (omap_mcbsp_check(id) < 0)
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
                 return;
+        }
 
         io_base = mcbsp[id].io_base;
 
-        mcbsp[id].rx_word_length = ((OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7);
-        mcbsp[id].tx_word_length = ((OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7);
+        mcbsp[id].rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
+        mcbsp[id].tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
 
         /* Start the sample generator */
         w = OMAP_MCBSP_READ(io_base, SPCR2);
@@ -422,20 +305,22 @@ void omap_mcbsp_start(unsigned int id)
 
         /* Dump McBSP Regs */
         omap_mcbsp_dump_reg(id);
-
 }
+EXPORT_SYMBOL(omap_mcbsp_start);
 
 void omap_mcbsp_stop(unsigned int id)
 {
         u32 io_base;
         u16 w;
 
-        if (omap_mcbsp_check(id) < 0)
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
                 return;
+        }
 
         io_base = mcbsp[id].io_base;
 
-        /* Reset transmitter */
+        /* Reset transmitter */
         w = OMAP_MCBSP_READ(io_base, SPCR2);
         OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
 
@@ -447,12 +332,19 @@ void omap_mcbsp_stop(unsigned int id)
         w = OMAP_MCBSP_READ(io_base, SPCR2);
         OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
 }
-
+EXPORT_SYMBOL(omap_mcbsp_stop);
 
 /* polled mcbsp i/o operations */
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 {
-        u32 base = mcbsp[id].io_base;
+        u32 base;
+
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+                return -ENODEV;
+        }
+
+        base = mcbsp[id].io_base;
         writew(buf, base + OMAP_MCBSP_REG_DXR1);
         /* if frame sync error - clear the error */
         if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
@@ -474,18 +366,27 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
                                        (XRST),
                                        base + OMAP_MCBSP_REG_SPCR2);
                                 udelay(10);
-                                printk(KERN_ERR
-                                       " Could not write to McBSP Register\n");
+                                dev_err(mcbsp[id].dev, "Could not write to"
+                                        " McBSP%d Register\n", mcbsp[id].id);
                                 return -2;
                         }
                 }
         }
+
         return 0;
 }
+EXPORT_SYMBOL(omap_mcbsp_pollwrite);
 
-int omap_mcbsp_pollread(unsigned int id, u16 * buf)
+int omap_mcbsp_pollread(unsigned int id, u16 *buf)
 {
-        u32 base = mcbsp[id].io_base;
+        u32 base;
+
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+                return -ENODEV;
+        }
+
+        base = mcbsp[id].io_base;
         /* if frame sync error - clear the error */
         if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
                 /* clear error */
@@ -506,15 +407,17 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf)
                                        (RRST),
                                        base + OMAP_MCBSP_REG_SPCR1);
                                 udelay(10);
-                                printk(KERN_ERR
-                                       " Could not read from McBSP Register\n");
+                                dev_err(mcbsp[id].dev, "Could not read from"
+                                        " McBSP%d Register\n", mcbsp[id].id);
                                 return -2;
                         }
                 }
         }
         *buf = readw(base + OMAP_MCBSP_REG_DRR1);
+
         return 0;
 }
+EXPORT_SYMBOL(omap_mcbsp_pollread);
 
 /*
  * IRQ based word transmission.
@@ -522,12 +425,15 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf)
 void omap_mcbsp_xmit_word(unsigned int id, u32 word)
 {
         u32 io_base;
-        omap_mcbsp_word_length word_length = mcbsp[id].tx_word_length;
+        omap_mcbsp_word_length word_length;
 
-        if (omap_mcbsp_check(id) < 0)
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
                 return;
+        }
 
         io_base = mcbsp[id].io_base;
+        word_length = mcbsp[id].tx_word_length;
 
         wait_for_completion(&(mcbsp[id].tx_irq_completion));
 
@@ -535,16 +441,20 @@ void omap_mcbsp_xmit_word(unsigned int id, u32 word)
                 OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
         OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff);
 }
+EXPORT_SYMBOL(omap_mcbsp_xmit_word);
 
 u32 omap_mcbsp_recv_word(unsigned int id)
 {
         u32 io_base;
         u16 word_lsb, word_msb = 0;
-        omap_mcbsp_word_length word_length = mcbsp[id].rx_word_length;
+        omap_mcbsp_word_length word_length;
 
-        if (omap_mcbsp_check(id) < 0)
-                return -EINVAL;
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+                return -ENODEV;
+        }
 
+        word_length = mcbsp[id].rx_word_length;
         io_base = mcbsp[id].io_base;
 
         wait_for_completion(&(mcbsp[id].rx_irq_completion));
@@ -555,15 +465,24 @@ u32 omap_mcbsp_recv_word(unsigned int id)
 
         return (word_lsb | (word_msb << 16));
 }
-
+EXPORT_SYMBOL(omap_mcbsp_recv_word);
 
 int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 {
-        u32 io_base = mcbsp[id].io_base;
-        omap_mcbsp_word_length tx_word_length = mcbsp[id].tx_word_length;
-        omap_mcbsp_word_length rx_word_length = mcbsp[id].rx_word_length;
+        u32 io_base;
+        omap_mcbsp_word_length tx_word_length;
+        omap_mcbsp_word_length rx_word_length;
         u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
 
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+                return -ENODEV;
+        }
+
+        io_base = mcbsp[id].io_base;
+        tx_word_length = mcbsp[id].tx_word_length;
+        rx_word_length = mcbsp[id].rx_word_length;
+
         if (tx_word_length != rx_word_length)
                 return -EINVAL;
 
@@ -577,7 +496,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
                         udelay(10);
                         OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
                         udelay(10);
-                        printk("McBSP transmitter not ready\n");
+                        dev_err(mcbsp[id].dev, "McBSP%d transmitter not "
+                                "ready\n", mcbsp[id].id);
                         return -EAGAIN;
                 }
         }
@@ -597,7 +517,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
                         udelay(10);
                         OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
                         udelay(10);
-                        printk("McBSP receiver not ready\n");
+                        dev_err(mcbsp[id].dev, "McBSP%d receiver not "
+                                "ready\n", mcbsp[id].id);
                         return -EAGAIN;
                 }
         }
@@ -609,14 +530,24 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 
         return 0;
 }
+EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
 
-int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
+int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 {
-        u32 io_base = mcbsp[id].io_base, clock_word = 0;
-        omap_mcbsp_word_length tx_word_length = mcbsp[id].tx_word_length;
-        omap_mcbsp_word_length rx_word_length = mcbsp[id].rx_word_length;
+        u32 io_base, clock_word = 0;
+        omap_mcbsp_word_length tx_word_length;
+        omap_mcbsp_word_length rx_word_length;
         u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
 
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+                return -ENODEV;
+        }
+
+        io_base = mcbsp[id].io_base;
+        tx_word_length = mcbsp[id].tx_word_length;
+        rx_word_length = mcbsp[id].rx_word_length;
+
         if (tx_word_length != rx_word_length)
                 return -EINVAL;
 
@@ -630,7 +561,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
                         udelay(10);
                         OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
                         udelay(10);
-                        printk("McBSP transmitter not ready\n");
+                        dev_err(mcbsp[id].dev, "McBSP%d transmitter not "
+                                "ready\n", mcbsp[id].id);
                         return -EAGAIN;
                 }
         }
@@ -650,7 +582,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
                         udelay(10);
                         OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
                         udelay(10);
-                        printk("McBSP receiver not ready\n");
+                        dev_err(mcbsp[id].dev, "McBSP%d receiver not "
+                                "ready\n", mcbsp[id].id);
                         return -EAGAIN;
                 }
         }
@@ -664,7 +597,7 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
 
         return 0;
 }
-
+EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll);
 
 /*
  * Simple DMA based buffer rx/tx routines.
@@ -673,25 +606,32 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word)
  * For anything fancier, you should use your own customized DMA
  * routines and callbacks.
  */
-int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length)
+int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
+                                unsigned int length)
 {
         int dma_tx_ch;
         int src_port = 0;
         int dest_port = 0;
         int sync_dev = 0;
 
-        if (omap_mcbsp_check(id) < 0)
-                return -EINVAL;
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+                return -ENODEV;
+        }
 
-        if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX", omap_mcbsp_tx_dma_callback,
-                             &mcbsp[id],
-                             &dma_tx_ch)) {
-                printk("OMAP-McBSP: Unable to request DMA channel for McBSP%d TX. Trying IRQ based TX\n", id+1);
+        if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX",
+                                omap_mcbsp_tx_dma_callback,
+                                &mcbsp[id],
+                                &dma_tx_ch)) {
+                dev_err(mcbsp[id].dev, " Unable to request DMA channel for "
+                                "McBSP%d TX. Trying IRQ based TX\n",
+                                mcbsp[id].id);
                 return -EAGAIN;
         }
         mcbsp[id].dma_tx_lch = dma_tx_ch;
 
-        DBG("TX DMA on channel %d\n", dma_tx_ch);
+        dev_err(mcbsp[id].dev, "McBSP%d TX DMA on channel %d\n", mcbsp[id].id,
+                dma_tx_ch);
 
         init_completion(&(mcbsp[id].tx_dma_completion));
 
@@ -699,7 +639,7 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
                 src_port = OMAP_DMA_PORT_TIPB;
                 dest_port = OMAP_DMA_PORT_EMIFF;
         }
-        if (cpu_is_omap24xx())
+        if (cpu_class_is_omap2())
                 sync_dev = mcbsp[id].dma_tx_sync;
 
         omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch,
@@ -722,29 +662,37 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
 
         omap_start_dma(mcbsp[id].dma_tx_lch);
         wait_for_completion(&(mcbsp[id].tx_dma_completion));
+
         return 0;
 }
+EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
 
-
-int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length)
+int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
+                                unsigned int length)
 {
         int dma_rx_ch;
         int src_port = 0;
         int dest_port = 0;
         int sync_dev = 0;
 
-        if (omap_mcbsp_check(id) < 0)
-                return -EINVAL;
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+                return -ENODEV;
+        }
 
-        if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX", omap_mcbsp_rx_dma_callback,
-                             &mcbsp[id],
-                             &dma_rx_ch)) {
-                printk("Unable to request DMA channel for McBSP%d RX. Trying IRQ based RX\n", id+1);
+        if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX",
+                                omap_mcbsp_rx_dma_callback,
+                                &mcbsp[id],
+                                &dma_rx_ch)) {
+                dev_err(mcbsp[id].dev, "Unable to request DMA channel for "
+                                "McBSP%d RX. Trying IRQ based RX\n",
+                                mcbsp[id].id);
                 return -EAGAIN;
         }
         mcbsp[id].dma_rx_lch = dma_rx_ch;
 
-        DBG("RX DMA on channel %d\n", dma_rx_ch);
+        dev_err(mcbsp[id].dev, "McBSP%d RX DMA on channel %d\n", mcbsp[id].id,
+                dma_rx_ch);
 
         init_completion(&(mcbsp[id].rx_dma_completion));
 
@@ -752,14 +700,14 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
                 src_port = OMAP_DMA_PORT_TIPB;
                 dest_port = OMAP_DMA_PORT_EMIFF;
         }
-        if (cpu_is_omap24xx())
+        if (cpu_class_is_omap2())
                 sync_dev = mcbsp[id].dma_rx_sync;
 
         omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch,
-                                     OMAP_DMA_DATA_TYPE_S16,
-                                     length >> 1, 1,
-                                     OMAP_DMA_SYNC_ELEMENT,
-         sync_dev, 0);
+                                        OMAP_DMA_DATA_TYPE_S16,
+                                        length >> 1, 1,
+                                        OMAP_DMA_SYNC_ELEMENT,
+                                        sync_dev, 0);
 
         omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
                                 src_port,
@@ -768,16 +716,17 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
                                 0, 0);
 
         omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
-                                 dest_port,
-                                 OMAP_DMA_AMODE_POST_INC,
-                                 buffer,
-                                 0, 0);
+                                        dest_port,
+                                        OMAP_DMA_AMODE_POST_INC,
+                                        buffer,
+                                        0, 0);
 
         omap_start_dma(mcbsp[id].dma_rx_lch);
         wait_for_completion(&(mcbsp[id].rx_dma_completion));
+
         return 0;
 }
-
+EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
 
 /*
  * SPI wrapper.
@@ -785,12 +734,15 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
  * this wrapper just need an omap_mcbsp_spi_cfg structure as an input.
  * Once this is done, you can call omap_mcbsp_start().
  */
-void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg)
+void omap_mcbsp_set_spi_mode(unsigned int id,
+                                const struct omap_mcbsp_spi_cfg *spi_cfg)
 {
         struct omap_mcbsp_reg_cfg mcbsp_cfg;
 
-        if (omap_mcbsp_check(id) < 0)
+        if (!omap_mcbsp_check_valid_id(id)) {
+                printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
                 return;
+        }
 
         memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
 
@@ -798,7 +750,7 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *
         mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0));
         mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0));
 
-        /* Clock stop mode */
+        /* Clock stop mode */
         if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY)
                 mcbsp_cfg.spcr1 |= (1 << 12);
         else
@@ -827,13 +779,12 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *
 
         if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) {
                 mcbsp_cfg.pcr0 |= CLKXM;
-                mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div -1);
+                mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div - 1);
                 mcbsp_cfg.pcr0 |= FSXM;
                 mcbsp_cfg.srgr2 &= ~FSGM;
                 mcbsp_cfg.xcr2 |= XDATDLY(1);
                 mcbsp_cfg.rcr2 |= RDATDLY(1);
-        }
-        else {
+        } else {
                 mcbsp_cfg.pcr0 &= ~CLKXM;
                 mcbsp_cfg.srgr1 |= CLKGDV(1);
                 mcbsp_cfg.pcr0 &= ~FSXM;
@@ -846,199 +797,99 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *
 
         omap_mcbsp_config(id, &mcbsp_cfg);
 }
-
+EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
 
 /*
  * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
  * 730 has only 2 McBSP, and both of them are MPU peripherals.
  */
-struct omap_mcbsp_info {
-        u32 virt_base;
-        u8 dma_rx_sync, dma_tx_sync;
-        u16 rx_irq, tx_irq;
-};
+static int __init omap_mcbsp_probe(struct platform_device *pdev)
+{
+        struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
+        int id = pdev->id - 1;
+        int ret = 0;
 
-#ifdef CONFIG_ARCH_OMAP730
-static const struct omap_mcbsp_info mcbsp_730[] = {
-        [0] = { .virt_base = io_p2v(OMAP730_MCBSP1_BASE),
-                .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
-                .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
-                .rx_irq = INT_730_McBSP1RX,
-                .tx_irq = INT_730_McBSP1TX },
-        [1] = { .virt_base = io_p2v(OMAP730_MCBSP2_BASE),
-                .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
-                .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
-                .rx_irq = INT_730_McBSP2RX,
-                .tx_irq = INT_730_McBSP2TX },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static const struct omap_mcbsp_info mcbsp_1510[] = {
-        [0] = { .virt_base = OMAP1510_MCBSP1_BASE,
-                .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
-                .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
-                .rx_irq = INT_McBSP1RX,
-                .tx_irq = INT_McBSP1TX },
-        [1] = { .virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
-                .dma_rx_sync = OMAP_DMA_MCBSP2_RX,
-                .dma_tx_sync = OMAP_DMA_MCBSP2_TX,
-                .rx_irq = INT_1510_SPI_RX,
-                .tx_irq = INT_1510_SPI_TX },
-        [2] = { .virt_base = OMAP1510_MCBSP3_BASE,
-                .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
-                .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
-                .rx_irq = INT_McBSP3RX,
-                .tx_irq = INT_McBSP3TX },
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static const struct omap_mcbsp_info mcbsp_1610[] = {
-        [0] = { .virt_base = OMAP1610_MCBSP1_BASE,
-                .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
-                .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
-                .rx_irq = INT_McBSP1RX,
-                .tx_irq = INT_McBSP1TX },
-        [1] = { .virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
-                .dma_rx_sync = OMAP_DMA_MCBSP2_RX,
-                .dma_tx_sync = OMAP_DMA_MCBSP2_TX,
-                .rx_irq = INT_1610_McBSP2_RX,
-                .tx_irq = INT_1610_McBSP2_TX },
-        [2] = { .virt_base = OMAP1610_MCBSP3_BASE,
-                .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
-                .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
-                .rx_irq = INT_McBSP3RX,
-                .tx_irq = INT_McBSP3TX },
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP24XX)
-static const struct omap_mcbsp_info mcbsp_24xx[] = {
-        [0] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
-                .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
-                .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
-                .rx_irq = INT_24XX_MCBSP1_IRQ_RX,
-                .tx_irq = INT_24XX_MCBSP1_IRQ_TX,
-                },
-        [1] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
-                .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
-                .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
-                .rx_irq = INT_24XX_MCBSP2_IRQ_RX,
-                .tx_irq = INT_24XX_MCBSP2_IRQ_TX,
-                },
-};
-#endif
+        if (!pdata) {
+                dev_err(&pdev->dev, "McBSP device initialized without"
+                                "platform data\n");
+                ret = -EINVAL;
+                goto exit;
+        }
+
+        dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id);
+
+        if (id >= OMAP_MAX_MCBSP_COUNT) {
+                dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id);
+                ret = -EINVAL;
+                goto exit;
+        }
+
+        spin_lock_init(&mcbsp[id].lock);
+        mcbsp[id].id = id + 1;
+        mcbsp[id].free = 1;
+        mcbsp[id].dma_tx_lch = -1;
+        mcbsp[id].dma_rx_lch = -1;
+
+        mcbsp[id].io_base = pdata->virt_base;
+        /* Default I/O is IRQ based */
+        mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO;
+        mcbsp[id].tx_irq = pdata->tx_irq;
+        mcbsp[id].rx_irq = pdata->rx_irq;
+        mcbsp[id].dma_rx_sync = pdata->dma_rx_sync;
+        mcbsp[id].dma_tx_sync = pdata->dma_tx_sync;
+
+        if (pdata->clk_name)
+                mcbsp[id].clk = clk_get(&pdev->dev, pdata->clk_name);
+        if (IS_ERR(mcbsp[id].clk)) {
+                mcbsp[id].free = 0;
+                dev_err(&pdev->dev,
+                        "Invalid clock configuration for McBSP%d.\n",
+                        mcbsp[id].id);
+                ret = -EINVAL;
+                goto exit;
+        }
+
+        mcbsp[id].pdata = pdata;
+        mcbsp[id].dev = &pdev->dev;
+        platform_set_drvdata(pdev, &mcbsp[id]);
+
+exit:
+        return ret;
+}
 
-static int __init omap_mcbsp_init(void)
+static int omap_mcbsp_remove(struct platform_device *pdev)
 {
-        int mcbsp_count = 0, i;
-        static const struct omap_mcbsp_info *mcbsp_info;
+        struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
 
-        printk("Initializing OMAP McBSP system\n");
+        platform_set_drvdata(pdev, NULL);
+        if (mcbsp) {
 
-#ifdef CONFIG_ARCH_OMAP1
-        mcbsp_dsp_ck = clk_get(0, "dsp_ck");
-        if (IS_ERR(mcbsp_dsp_ck)) {
-                printk(KERN_ERR "mcbsp: could not acquire dsp_ck handle.\n");
-                return PTR_ERR(mcbsp_dsp_ck);
-        }
-        mcbsp_api_ck = clk_get(0, "api_ck");
-        if (IS_ERR(mcbsp_api_ck)) {
-                printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n");
-                return PTR_ERR(mcbsp_api_ck);
-        }
-        mcbsp_dspxor_ck = clk_get(0, "dspxor_ck");
-        if (IS_ERR(mcbsp_dspxor_ck)) {
-                printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n");
-                return PTR_ERR(mcbsp_dspxor_ck);
-        }
-#endif
-#ifdef CONFIG_ARCH_OMAP2
-        mcbsp1_ick = clk_get(0, "mcbsp1_ick");
-        if (IS_ERR(mcbsp1_ick)) {
-                printk(KERN_ERR "mcbsp: could not acquire mcbsp1_ick handle.\n");
-                return PTR_ERR(mcbsp1_ick);
-        }
-        mcbsp1_fck = clk_get(0, "mcbsp1_fck");
-        if (IS_ERR(mcbsp1_fck)) {
-                printk(KERN_ERR "mcbsp: could not acquire mcbsp1_fck handle.\n");
-                return PTR_ERR(mcbsp1_fck);
-        }
-        mcbsp2_ick = clk_get(0, "mcbsp2_ick");
-        if (IS_ERR(mcbsp2_ick)) {
-                printk(KERN_ERR "mcbsp: could not acquire mcbsp2_ick handle.\n");
-                return PTR_ERR(mcbsp2_ick);
-        }
-        mcbsp2_fck = clk_get(0, "mcbsp2_fck");
-        if (IS_ERR(mcbsp2_fck)) {
-                printk(KERN_ERR "mcbsp: could not acquire mcbsp2_fck handle.\n");
-                return PTR_ERR(mcbsp2_fck);
-        }
-#endif
+                if (mcbsp->pdata && mcbsp->pdata->ops &&
+                                mcbsp->pdata->ops->free)
+                        mcbsp->pdata->ops->free(mcbsp->id);
 
-#ifdef CONFIG_ARCH_OMAP730
-        if (cpu_is_omap730()) {
-                mcbsp_info = mcbsp_730;
-                mcbsp_count = ARRAY_SIZE(mcbsp_730);
-        }
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-        if (cpu_is_omap15xx()) {
-                mcbsp_info = mcbsp_1510;
-                mcbsp_count = ARRAY_SIZE(mcbsp_1510);
-        }
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-        if (cpu_is_omap16xx()) {
-                mcbsp_info = mcbsp_1610;
-                mcbsp_count = ARRAY_SIZE(mcbsp_1610);
-        }
-#endif
-#if defined(CONFIG_ARCH_OMAP24XX)
-        if (cpu_is_omap24xx()) {
-                mcbsp_info = mcbsp_24xx;
-                mcbsp_count = ARRAY_SIZE(mcbsp_24xx);
-                omap2_mcbsp2_mux_setup();
-        }
-#endif
-        for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) {
-                if (i >= mcbsp_count) {
-                        mcbsp[i].io_base = 0;
-                        mcbsp[i].free = 0;
-                        continue;
-                }
-                mcbsp[i].id = i + 1;
-                mcbsp[i].free = 1;
-                mcbsp[i].dma_tx_lch = -1;
-                mcbsp[i].dma_rx_lch = -1;
-
-                mcbsp[i].io_base = mcbsp_info[i].virt_base;
-                mcbsp[i].io_type = OMAP_MCBSP_IRQ_IO; /* Default I/O is IRQ based */
-                mcbsp[i].tx_irq = mcbsp_info[i].tx_irq;
-                mcbsp[i].rx_irq = mcbsp_info[i].rx_irq;
-                mcbsp[i].dma_rx_sync = mcbsp_info[i].dma_rx_sync;
-                mcbsp[i].dma_tx_sync = mcbsp_info[i].dma_tx_sync;
-                spin_lock_init(&mcbsp[i].lock);
+                clk_disable(mcbsp->clk);
+                clk_put(mcbsp->clk);
+
+                mcbsp->clk = NULL;
+                mcbsp->free = 0;
+                mcbsp->dev = NULL;
         }
 
         return 0;
 }
 
-arch_initcall(omap_mcbsp_init);
+static struct platform_driver omap_mcbsp_driver = {
+        .probe          = omap_mcbsp_probe,
+        .remove         = omap_mcbsp_remove,
+        .driver         = {
+                .name   = "omap-mcbsp",
+        },
+};
+
+int __init omap_mcbsp_init(void)
+{
+        /* Register the McBSP driver */
+        return platform_driver_register(&omap_mcbsp_driver);
+}
 
-EXPORT_SYMBOL(omap_mcbsp_config);
-EXPORT_SYMBOL(omap_mcbsp_request);
-EXPORT_SYMBOL(omap_mcbsp_set_io_type);
-EXPORT_SYMBOL(omap_mcbsp_free);
-EXPORT_SYMBOL(omap_mcbsp_start);
-EXPORT_SYMBOL(omap_mcbsp_stop);
-EXPORT_SYMBOL(omap_mcbsp_pollread);
-EXPORT_SYMBOL(omap_mcbsp_pollwrite);
-EXPORT_SYMBOL(omap_mcbsp_xmit_word);
-EXPORT_SYMBOL(omap_mcbsp_recv_word);
-EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
-EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
-EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
-EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll);
-EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 1f23f0459e5f..554ee58e1294 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -10,6 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#undef DEBUG
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -24,25 +25,43 @@
 #include <asm/arch/sram.h>
 #include <asm/arch/board.h>
 
+#include <asm/arch/control.h>
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+# include "../mach-omap2/prm.h"
+# include "../mach-omap2/cm.h"
+# include "../mach-omap2/sdrc.h"
+#endif
+
 #define OMAP1_SRAM_PA           0x20000000
-#define OMAP1_SRAM_VA           0xd0000000
+#define OMAP1_SRAM_VA           VMALLOC_END
 #define OMAP2_SRAM_PA           0x40200000
 #define OMAP2_SRAM_PUB_PA       0x4020f800
-#define OMAP2_SRAM_VA           0xd0000000
-#define OMAP2_SRAM_PUB_VA       0xd0000800
-
-#if defined(CONFIG_ARCH_OMAP24XX)
+#define OMAP2_SRAM_VA           VMALLOC_END
+#define OMAP2_SRAM_PUB_VA       (VMALLOC_END + 0x800)
+#define OMAP3_SRAM_PA           0x40200000
+#define OMAP3_SRAM_VA           0xd7000000
+#define OMAP3_SRAM_PUB_PA       0x40208000
+#define OMAP3_SRAM_PUB_VA       0xd7008000
+
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ      0x00
 #else
 #define SRAM_BOOTLOADER_SZ      0x80
 #endif
 
-#define VA_REQINFOPERM0         IO_ADDRESS(0x68005048)
-#define VA_READPERM0            IO_ADDRESS(0x68005050)
-#define VA_WRITEPERM0           IO_ADDRESS(0x68005058)
-#define VA_CONTROL_STAT         IO_ADDRESS(0x480002F8)
+#define OMAP24XX_VA_REQINFOPERM0        IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0           IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0          IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0        IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0           IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0          IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2         IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0         IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT        IO_ADDRESS(0x480022F0)
+
 #define GP_DEVICE               0x300
-#define TYPE_MASK               0x700
 
 #define ROUND_DOWN(value,boundary)      ((value) & (~((boundary)-1)))
 
@@ -68,14 +87,21 @@ static int is_sram_locked(void)
         int type = 0;
 
         if (cpu_is_omap242x())
-                type = __raw_readl(VA_CONTROL_STAT) & TYPE_MASK;
+                type = system_rev & OMAP2_DEVICETYPE_MASK;
 
         if (type == GP_DEVICE) {
                 /* RAMFW: R/W access to all initiators for all qualifier sets */
                 if (cpu_is_omap242x()) {
-                        __raw_writel(0xFF, VA_REQINFOPERM0); /* all q-vects */
-                        __raw_writel(0xCFDE, VA_READPERM0);  /* all i-read */
-                        __raw_writel(0xCFDE, VA_WRITEPERM0); /* all i-write */
+                        __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
+                        __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
+                        __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
+                }
+                if (cpu_is_omap34xx()) {
+                        __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+                        __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
+                        __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+                        __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
+                        __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
                 }
                 return 0;
         } else
@@ -92,18 +118,30 @@ void __init omap_detect_sram(void)
 {
         unsigned long reserved;
 
-        if (cpu_is_omap24xx()) {
+        if (cpu_class_is_omap2()) {
                 if (is_sram_locked()) {
-                        omap_sram_base = OMAP2_SRAM_PUB_VA;
-                        omap_sram_start = OMAP2_SRAM_PUB_PA;
-                        omap_sram_size = 0x800; /* 2K */
+                        if (cpu_is_omap34xx()) {
+                                omap_sram_base = OMAP3_SRAM_PUB_VA;
+                                omap_sram_start = OMAP3_SRAM_PUB_PA;
+                                omap_sram_size = 0x8000; /* 32K */
+                        } else {
+                                omap_sram_base = OMAP2_SRAM_PUB_VA;
+                                omap_sram_start = OMAP2_SRAM_PUB_PA;
+                                omap_sram_size = 0x800; /* 2K */
+                        }
                 } else {
-                        omap_sram_base = OMAP2_SRAM_VA;
-                        omap_sram_start = OMAP2_SRAM_PA;
-                        if (cpu_is_omap242x())
-                                omap_sram_size = 0xa0000; /* 640K */
-                        else if (cpu_is_omap243x())
+                        if (cpu_is_omap34xx()) {
+                                omap_sram_base = OMAP3_SRAM_VA;
+                                omap_sram_start = OMAP3_SRAM_PA;
                                 omap_sram_size = 0x10000; /* 64K */
+                        } else {
+                                omap_sram_base = OMAP2_SRAM_VA;
+                                omap_sram_start = OMAP2_SRAM_PA;
+                                if (cpu_is_omap242x())
+                                        omap_sram_size = 0xa0000; /* 640K */
+                                else if (cpu_is_omap243x())
+                                        omap_sram_size = 0x10000; /* 64K */
+                        }
                 }
         } else {
                 omap_sram_base = OMAP1_SRAM_VA;
@@ -157,6 +195,13 @@ void __init omap_map_sram(void)
                 omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
         }
 
+        if (cpu_is_omap34xx()) {
+                omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA;
+                base = OMAP3_SRAM_PA;
+                base = ROUND_DOWN(base, PAGE_SIZE);
+                omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+        }
+
         omap_sram_io_desc[0].length = 1024 * 1024;      /* Use section desc */
         iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
@@ -191,6 +236,7 @@ void * omap_sram_push(void * start, unsigned long size)
         omap_sram_ceil -= size;
         omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
         memcpy((void *)omap_sram_ceil, start, size);
+        flush_icache_range((unsigned long)start, (unsigned long)(start + size));
 
         return (void *)omap_sram_ceil;
 }
@@ -214,8 +260,9 @@ void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
 
 int __init omap1_sram_init(void)
 {
-        _omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock,
-                                                    sram_reprogram_clock_sz);
+        _omap_sram_reprogram_clock =
+                        omap_sram_push(omap1_sram_reprogram_clock,
+                                        omap1_sram_reprogram_clock_sz);
 
         return 0;
 }
@@ -224,7 +271,7 @@ int __init omap1_sram_init(void)
 #define omap1_sram_init()       do {} while (0)
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 
 static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
                               u32 base_cs, u32 force_unlock);
@@ -259,19 +306,109 @@ u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
 
         return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
 }
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+int __init omap242x_sram_init(void)
+{
+        _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
+                                        omap242x_sram_ddr_init_sz);
+
+        _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
+                                            omap242x_sram_reprogram_sdrc_sz);
+
+        _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
+                                         omap242x_sram_set_prcm_sz);
+
+        return 0;
+}
+#else
+static inline int omap242x_sram_init(void)
+{
+        return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+int __init omap243x_sram_init(void)
+{
+        _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
+                                        omap243x_sram_ddr_init_sz);
+
+        _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
+                                            omap243x_sram_reprogram_sdrc_sz);
+
+        _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
+                                         omap243x_sram_set_prcm_sz);
+
+        return 0;
+}
+#else
+static inline int omap243x_sram_init(void)
+{
+        return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+
+static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level);
+u32 omap2_sram_reprogram_gpmc(u32 perf_level)
+{
+        if (!_omap2_sram_reprogram_gpmc)
+                omap_sram_error();
+
+        return _omap2_sram_reprogram_gpmc(perf_level);
+}
+
+static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n,
+                                                u32 freqsel, u32 m2);
+u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2)
+{
+        if (!_omap2_sram_configure_core_dpll)
+                omap_sram_error();
+
+        return _omap2_sram_configure_core_dpll(m, n, freqsel, m2);
+}
 
-int __init omap2_sram_init(void)
+/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
+void restore_sram_functions(void)
 {
-        _omap2_sram_ddr_init = omap_sram_push(sram_ddr_init, sram_ddr_init_sz);
+        omap_sram_ceil = omap_sram_base + omap_sram_size;
 
-        _omap2_sram_reprogram_sdrc = omap_sram_push(sram_reprogram_sdrc,
-                                                    sram_reprogram_sdrc_sz);
-        _omap2_set_prcm = omap_sram_push(sram_set_prcm, sram_set_prcm_sz);
+        _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
+                omap34xx_sram_reprogram_gpmc_sz);
+
+        _omap2_sram_configure_core_dpll =
+                        omap_sram_push(omap34xx_sram_configure_core_dpll,
+                                        omap34xx_sram_configure_core_dpll_sz);
+}
+
+int __init omap34xx_sram_init(void)
+{
+        _omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init,
+                                        omap34xx_sram_ddr_init_sz);
+
+        _omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc,
+                                        omap34xx_sram_reprogram_sdrc_sz);
+
+        _omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm,
+                                        omap34xx_sram_set_prcm_sz);
+
+        _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
+                                        omap34xx_sram_reprogram_gpmc_sz);
+
+        _omap2_sram_configure_core_dpll =
+                                omap_sram_push(omap34xx_sram_configure_core_dpll,
+                                        omap34xx_sram_configure_core_dpll_sz);
 
         return 0;
 }
 #else
-#define omap2_sram_init()       do {} while (0)
+static inline int omap34xx_sram_init(void)
+{
+        return 0;
+}
 #endif
 
 int __init omap_sram_init(void)
@@ -279,10 +416,14 @@ int __init omap_sram_init(void)
         omap_detect_sram();
         omap_map_sram();
 
-        if (!cpu_is_omap24xx())
+        if (!(cpu_class_is_omap2()))
                 omap1_sram_init();
-        else
-                omap2_sram_init();
+        else if (cpu_is_omap242x())
+                omap242x_sram_init();
+        else if (cpu_is_omap2430())
+                omap243x_sram_init();
+        else if (cpu_is_omap34xx())
+                omap34xx_sram_init();
 
         return 0;
 }
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index a619475c4b76..2699c16d4da0 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -1,4 +1,4 @@
-/*
+ /*
  * arch/arm/plat-omap/usb.c -- platform level USB initialization
  *
  * Copyright (C) 2004 Texas Instruments, Inc.
@@ -156,8 +156,12 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 
         if (nwires == 0) {
                 if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+                        u32 l;
+
                         /* pulldown D+/D- */
-                        USB_TRANSCEIVER_CTRL_REG &= ~(3 << 1);
+                        l = omap_readl(USB_TRANSCEIVER_CTRL);
+                        l &= ~(3 << 1);
+                        omap_writel(l, USB_TRANSCEIVER_CTRL);
                 }
                 return 0;
         }
@@ -171,6 +175,8 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 
         /* internal transceiver (unavailable on 17xx, 24xx) */
         if (!cpu_class_is_omap2() && nwires == 2) {
+                u32 l;
+
                 // omap_cfg_reg(P9_USB_DP);
                 // omap_cfg_reg(R8_USB_DM);
 
@@ -185,9 +191,11 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
                  *  - OTG support on this port not yet written
                  */
 
-                USB_TRANSCEIVER_CTRL_REG &= ~(7 << 4);
+                l = omap_readl(USB_TRANSCEIVER_CTRL);
+                l &= ~(7 << 4);
                 if (!is_device)
-                        USB_TRANSCEIVER_CTRL_REG |= (3 << 1);
+                        l |= (3 << 1);
+                omap_writel(l, USB_TRANSCEIVER_CTRL);
 
                 return 3 << 16;
         }
@@ -217,8 +225,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
          * with VBUS switching and overcurrent detection.
          */
 
-        if (cpu_class_is_omap1() && nwires != 6)
-                USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R;
+        if (cpu_class_is_omap1() && nwires != 6) {
+                u32 l;
+
+                l = omap_readl(USB_TRANSCEIVER_CTRL);
+                l &= ~CONF_USB2_UNI_R;
+                omap_writel(l, USB_TRANSCEIVER_CTRL);
+        }
 
         switch (nwires) {
         case 3:
@@ -238,9 +251,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
                         omap_cfg_reg(K20_24XX_USB0_VM);
                         omap2_usb_devconf_set(0, USB_UNIDIR);
                 } else {
+                        u32 l;
+
                         omap_cfg_reg(AA9_USB0_VP);
                         omap_cfg_reg(R9_USB0_VM);
-                        USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R;
+                        l = omap_readl(USB_TRANSCEIVER_CTRL);
+                        l |= CONF_USB2_UNI_R;
+                        omap_writel(l, USB_TRANSCEIVER_CTRL);
                 }
                 break;
         default:
@@ -254,8 +271,13 @@ static u32 __init omap_usb1_init(unsigned nwires)
 {
         u32     syscon1 = 0;
 
-        if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6)
-                USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB1_UNI_R;
+        if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
+                u32 l;
+
+                l = omap_readl(USB_TRANSCEIVER_CTRL);
+                l &= ~CONF_USB1_UNI_R;
+                omap_writel(l, USB_TRANSCEIVER_CTRL);
+        }
         if (cpu_is_omap24xx())
                 omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
 
@@ -316,8 +338,13 @@ static u32 __init omap_usb1_init(unsigned nwires)
                 syscon1 = 3;
                 omap_cfg_reg(USB1_VP);
                 omap_cfg_reg(USB1_VM);
-                if (!cpu_is_omap15xx())
-                        USB_TRANSCEIVER_CTRL_REG |= CONF_USB1_UNI_R;
+                if (!cpu_is_omap15xx()) {
+                        u32 l;
+
+                        l = omap_readl(USB_TRANSCEIVER_CTRL);
+                        l |= CONF_USB1_UNI_R;
+                        omap_writel(l, USB_TRANSCEIVER_CTRL);
+                }
                 break;
         default:
 bad:
@@ -340,8 +367,13 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
         if (alt_pingroup || nwires == 0)
                 return 0;
 
-        if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6)
-                USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R;
+        if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
+                u32 l;
+
+                l = omap_readl(USB_TRANSCEIVER_CTRL);
+                l &= ~CONF_USB2_UNI_R;
+                omap_writel(l, USB_TRANSCEIVER_CTRL);
+        }
 
         /* external transceiver */
         if (cpu_is_omap15xx()) {
@@ -410,9 +442,13 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
                         omap_cfg_reg(USB2_VP);
                         omap_cfg_reg(USB2_VM);
                 } else {
+                        u32 l;
+
                         omap_cfg_reg(AA9_USB2_VP);
                         omap_cfg_reg(R9_USB2_VM);
-                        USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R;
+                        l = omap_readl(USB_TRANSCEIVER_CTRL);
+                        l |= CONF_USB2_UNI_R;
+                        omap_writel(l, USB_TRANSCEIVER_CTRL);
                 }
                 break;
         default:
@@ -531,10 +567,6 @@ static struct platform_device otg_device = {
 
 /*-------------------------------------------------------------------------*/
 
-#define ULPD_CLOCK_CTRL_REG     __REG16(ULPD_CLOCK_CTRL)
-#define ULPD_SOFT_REQ_REG       __REG16(ULPD_SOFT_REQ)
-
-
 // FIXME correct answer depends on hmc_mode,
 // as does (on omap1) any nonzero value for config->otg port number
 #ifdef  CONFIG_USB_GADGET_OMAP
@@ -550,17 +582,17 @@ static struct platform_device otg_device = {
 void __init
 omap_otg_init(struct omap_usb_config *config)
 {
-        u32             syscon = OTG_SYSCON_1_REG & 0xffff;
+        u32             syscon;
         int             status;
         int             alt_pingroup = 0;
 
         /* NOTE:  no bus or clock setup (yet?) */
 
-        syscon = OTG_SYSCON_1_REG & 0xffff;
+        syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
         if (!(syscon & OTG_RESET_DONE))
                 pr_debug("USB resets not complete?\n");
 
-        // OTG_IRQ_EN_REG = 0;
+        //omap_writew(0, OTG_IRQ_EN);
 
         /* pin muxing and transceiver pinouts */
         if (config->pins[0] > 2)        /* alt pingroup 2 */
@@ -568,8 +600,8 @@ omap_otg_init(struct omap_usb_config *config)
         syscon |= omap_usb0_init(config->pins[0], is_usb0_device(config));
         syscon |= omap_usb1_init(config->pins[1]);
         syscon |= omap_usb2_init(config->pins[2], alt_pingroup);
-        pr_debug("OTG_SYSCON_1_REG = %08x\n", syscon);
-        OTG_SYSCON_1_REG = syscon;
+        pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+        omap_writel(syscon, OTG_SYSCON_1);
 
         syscon = config->hmc_mode;
         syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
@@ -578,9 +610,10 @@ omap_otg_init(struct omap_usb_config *config)
                 syscon |= OTG_EN;
 #endif
         if (cpu_class_is_omap1())
-                pr_debug("USB_TRANSCEIVER_CTRL_REG = %03x\n", USB_TRANSCEIVER_CTRL_REG);
-        pr_debug("OTG_SYSCON_2_REG = %08x\n", syscon);
-        OTG_SYSCON_2_REG = syscon;
+                pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
+                         omap_readl(USB_TRANSCEIVER_CTRL));
+        pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
+        omap_writel(syscon, OTG_SYSCON_2);
 
         printk("USB: hmc %d", config->hmc_mode);
         if (!alt_pingroup)
@@ -597,12 +630,19 @@ omap_otg_init(struct omap_usb_config *config)
         printk("\n");
 
         if (cpu_class_is_omap1()) {
+                u16 w;
+
                 /* leave USB clocks/controllers off until needed */
-                ULPD_SOFT_REQ_REG &= ~SOFT_USB_CLK_REQ;
-                ULPD_CLOCK_CTRL_REG &= ~USB_MCLK_EN;
-                ULPD_CLOCK_CTRL_REG |= DIS_USB_PVCI_CLK;
+                w = omap_readw(ULPD_SOFT_REQ);
+                w &= ~SOFT_USB_CLK_REQ;
+                omap_writew(w, ULPD_SOFT_REQ);
+
+                w = omap_readw(ULPD_CLOCK_CTRL);
+                w &= ~USB_MCLK_EN;
+                w |= DIS_USB_PVCI_CLK;
+                omap_writew(w, ULPD_CLOCK_CTRL);
         }
-        syscon = OTG_SYSCON_1_REG;
+        syscon = omap_readl(OTG_SYSCON_1);
         syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
 
 #ifdef  CONFIG_USB_GADGET_OMAP
@@ -639,8 +679,8 @@ omap_otg_init(struct omap_usb_config *config)
                         pr_debug("can't register OTG device, %d\n", status);
         }
 #endif
-        pr_debug("OTG_SYSCON_1_REG = %08x\n", syscon);
-        OTG_SYSCON_1_REG = syscon;
+        pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+        omap_writel(syscon, OTG_SYSCON_1);
 
         status = 0;
 }
@@ -653,18 +693,19 @@ static inline void omap_otg_init(struct omap_usb_config *config) {}
 
 #ifdef  CONFIG_ARCH_OMAP15XX
 
-#define ULPD_DPLL_CTRL_REG      __REG16(ULPD_DPLL_CTRL)
+/* ULPD_DPLL_CTRL */
 #define DPLL_IOB                (1 << 13)
 #define DPLL_PLL_ENABLE         (1 << 4)
 #define DPLL_LOCK               (1 << 0)
 
-#define ULPD_APLL_CTRL_REG      __REG16(ULPD_APLL_CTRL)
+/* ULPD_APLL_CTRL */
 #define APLL_NDPLL_SWITCH       (1 << 0)
 
 
 static void __init omap_1510_usb_init(struct omap_usb_config *config)
 {
         unsigned int val;
+        u16 w;
 
         omap_usb0_init(config->pins[0], is_usb0_device(config));
         omap_usb1_init(config->pins[1]);
@@ -685,12 +726,22 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
         printk("\n");
 
         /* use DPLL for 48 MHz function clock */
-        pr_debug("APLL %04x DPLL %04x REQ %04x\n", ULPD_APLL_CTRL_REG,
-                        ULPD_DPLL_CTRL_REG, ULPD_SOFT_REQ_REG);
-        ULPD_APLL_CTRL_REG &= ~APLL_NDPLL_SWITCH;
-        ULPD_DPLL_CTRL_REG |= DPLL_IOB | DPLL_PLL_ENABLE;
-        ULPD_SOFT_REQ_REG |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
-        while (!(ULPD_DPLL_CTRL_REG & DPLL_LOCK))
+        pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
+                        omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
+
+        w = omap_readw(ULPD_APLL_CTRL);
+        w &= ~APLL_NDPLL_SWITCH;
+        omap_writew(w, ULPD_APLL_CTRL);
+
+        w = omap_readw(ULPD_DPLL_CTRL);
+        w |= DPLL_IOB | DPLL_PLL_ENABLE;
+        omap_writew(w, ULPD_DPLL_CTRL);
+
+        w = omap_readw(ULPD_SOFT_REQ);
+        w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
+        omap_writew(w, ULPD_SOFT_REQ);
+
+        while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
                 cpu_relax();
 
 #ifdef  CONFIG_USB_GADGET_OMAP
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index c5b669d234bc..fe66a1835169 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -36,8 +36,8 @@ static void orion_irq_unmask(u32 irq)
 
 static struct irq_chip orion_irq_chip = {
         .name           = "orion_irq",
-        .ack            = orion_irq_mask,
         .mask           = orion_irq_mask,
+        .mask_ack       = orion_irq_mask,
         .unmask         = orion_irq_unmask,
 };
 
@@ -59,6 +59,7 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
                 set_irq_chip(irq, &orion_irq_chip);
                 set_irq_chip_data(irq, maskaddr);
                 set_irq_handler(irq, handle_level_irq);
+                irq_desc[irq].status |= IRQ_LEVEL;
                 set_irq_flags(irq, IRQF_VALID);
         }
 }
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index abfda53f1800..ca32c60e14d7 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -39,6 +39,7 @@
 #define PCIE_CONF_DATA_OFF      0x18fc
 #define PCIE_MASK_OFF           0x1910
 #define PCIE_CTRL_OFF           0x1a00
+#define  PCIE_CTRL_X1_MODE              0x0001
 #define PCIE_STAT_OFF           0x1a04
 #define  PCIE_STAT_DEV_OFFS             20
 #define  PCIE_STAT_DEV_MASK             0x1f
@@ -62,6 +63,11 @@ int orion_pcie_link_up(void __iomem *base)
         return !(readl(base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
 }
 
+int __init orion_pcie_x4_mode(void __iomem *base)
+{
+        return !(readl(base + PCIE_CTRL_OFF) & PCIE_CTRL_X1_MODE);
+}
+
 int orion_pcie_get_local_bus_nr(void __iomem *base)
 {
         u32 stat = readl(base + PCIE_STAT_OFF);
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 28b5285446e8..93c4ef9f0067 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -74,7 +74,7 @@ orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
         /*
          * Clear and enable clockevent timer interrupt.
          */
-        writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+        writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
 
         u = readl(BRIDGE_MASK);
         u |= BRIDGE_INT_TIMER1;
@@ -138,7 +138,7 @@ orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
                 /*
                  * ACK pending timer interrupt.
                  */
-                writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+                writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
 
         }
         local_irq_restore(flags);
@@ -159,7 +159,7 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
         /*
          * ACK timer interrupt and call event handler.
          */
-        writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+        writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
         orion_clkevt.event_handler(&orion_clkevt);
 
         return IRQ_HANDLED;
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index b66fb3c4e228..5e28c217b8c2 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,6 +9,7 @@ config PLAT_S3C24XX
         depends on ARCH_S3C2410
         default y if ARCH_S3C2410
         select NO_IOPORT
+        select HAVE_GPIO_LIB
         help
           Base platform code for any Samsung S3C24XX device
 
@@ -20,6 +21,13 @@ config CPU_S3C244X
         help
           Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
 
+config S3C24XX_PWM
+        bool "PWM device support"
+        select HAVE_PWM
+        help
+          Support for exporting the PWM timer blocks via the pwm device
+          system.
+
 config PM_SIMTEC
         bool
         help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 131d20237dd7..d82767b2b833 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -16,8 +16,10 @@ obj-y				+= cpu.o
 obj-y                           += irq.o
 obj-y                           += devs.o
 obj-y                           += gpio.o
+obj-y                           += gpiolib.o
 obj-y                           += time.o
 obj-y                           += clock.o
+obj-y                           += pwm-clock.o
 
 # Architecture dependant builds
 
@@ -27,5 +29,6 @@ obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
 obj-$(CONFIG_PM_SIMTEC)         += pm-simtec.o
 obj-$(CONFIG_PM)                += pm.o
 obj-$(CONFIG_PM)                += sleep.o
+obj-$(CONFIG_HAVE_PWM)          += pwm.o
 obj-$(CONFIG_S3C2410_DMA)       += dma.o
 obj-$(CONFIG_MACH_SMDK)         += common-smdk.o
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index e546e933b3f7..eea3b32ff798 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -495,106 +495,6 @@ struct platform_device s3c_device_spi1 = {
 
 EXPORT_SYMBOL(s3c_device_spi1);
 
-/* pwm timer blocks */
-
-static struct resource s3c_timer0_resource[] = {
-        [0] = {
-                .start = S3C24XX_PA_TIMER + 0x0C,
-                .end   = S3C24XX_PA_TIMER + 0x0C + 0xB,
-                .flags = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start = IRQ_TIMER0,
-                .end   = IRQ_TIMER0,
-                .flags = IORESOURCE_IRQ,
-        }
-
-};
-
-struct platform_device s3c_device_timer0 = {
-        .name             = "s3c2410-timer",
-        .id               = 0,
-        .num_resources    = ARRAY_SIZE(s3c_timer0_resource),
-        .resource         = s3c_timer0_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer0);
-
-/* timer 1 */
-
-static struct resource s3c_timer1_resource[] = {
-        [0] = {
-                .start = S3C24XX_PA_TIMER + 0x18,
-                .end   = S3C24XX_PA_TIMER + 0x23,
-                .flags = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start = IRQ_TIMER1,
-                .end   = IRQ_TIMER1,
-                .flags = IORESOURCE_IRQ,
-        }
-
-};
-
-struct platform_device s3c_device_timer1 = {
-        .name             = "s3c2410-timer",
-        .id               = 1,
-        .num_resources    = ARRAY_SIZE(s3c_timer1_resource),
-        .resource         = s3c_timer1_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer1);
-
-/* timer 2 */
-
-static struct resource s3c_timer2_resource[] = {
-        [0] = {
-                .start = S3C24XX_PA_TIMER + 0x24,
-                .end   = S3C24XX_PA_TIMER + 0x2F,
-                .flags = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start = IRQ_TIMER2,
-                .end   = IRQ_TIMER2,
-                .flags = IORESOURCE_IRQ,
-        }
-
-};
-
-struct platform_device s3c_device_timer2 = {
-        .name             = "s3c2410-timer",
-        .id               = 2,
-        .num_resources    = ARRAY_SIZE(s3c_timer2_resource),
-        .resource         = s3c_timer2_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer2);
-
-/* timer 3 */
-
-static struct resource s3c_timer3_resource[] = {
-        [0] = {
-                .start = S3C24XX_PA_TIMER + 0x30,
-                .end   = S3C24XX_PA_TIMER + 0x3B,
-                .flags = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start = IRQ_TIMER3,
-                .end   = IRQ_TIMER3,
-                .flags = IORESOURCE_IRQ,
-        }
-
-};
-
-struct platform_device s3c_device_timer3 = {
-        .name             = "s3c2410-timer",
-        .id               = 3,
-        .num_resources    = ARRAY_SIZE(s3c_timer3_resource),
-        .resource         = s3c_timer3_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer3);
-
 #ifdef CONFIG_CPU_S3C2440
 
 /* Camif Controller */
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
new file mode 100644
index 000000000000..825d8d0c5ca2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -0,0 +1,259 @@
+/* linux/arch/arm/plat-s3c24xx/gpiolib.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-gpio.h>
+
+struct s3c24xx_gpio_chip {
+        struct gpio_chip        chip;
+        void __iomem            *base;
+};
+
+static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc)
+{
+        return container_of(gpc, struct s3c24xx_gpio_chip, chip);
+}
+
+/* these routines are exported for use by other parts of the platform
+ * and system support, but are not intended to be used directly by the
+ * drivers themsevles.
+ */
+
+int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+        struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+        void __iomem *base = ourchip->base;
+        unsigned long flags;
+        unsigned long con;
+
+        local_irq_save(flags);
+
+        con = __raw_readl(base + 0x00);
+        con &= ~(3 << (offset * 2));
+        con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
+
+        __raw_writel(con, base + 0x00);
+
+        local_irq_restore(flags);
+        return 0;
+}
+
+int s3c24xx_gpiolib_output(struct gpio_chip *chip,
+                                  unsigned offset, int value)
+{
+        struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+        void __iomem *base = ourchip->base;
+        unsigned long flags;
+        unsigned long dat;
+        unsigned long con;
+
+        local_irq_save(flags);
+
+        dat = __raw_readl(base + 0x04);
+        dat &= ~(1 << offset);
+        if (value)
+                dat |= 1 << offset;
+        __raw_writel(dat, base + 0x04);
+
+        con = __raw_readl(base + 0x00);
+        con &= ~(3 << (offset * 2));
+        con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
+
+        __raw_writel(con, base + 0x00);
+        __raw_writel(dat, base + 0x04);
+
+        local_irq_restore(flags);
+        return 0;
+}
+
+void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+        struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+        void __iomem *base = ourchip->base;
+        unsigned long flags;
+        unsigned long dat;
+
+        local_irq_save(flags);
+
+        dat = __raw_readl(base + 0x04);
+        dat &= ~(1 << offset);
+        if (value)
+                dat |= 1 << offset;
+        __raw_writel(dat, base + 0x04);
+
+        local_irq_restore(flags);
+}
+
+int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+        struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+        unsigned long val;
+
+        val = __raw_readl(ourchip->base + 0x04);
+        val >>= offset;
+        val &= 1;
+
+        return val;
+}
+
+static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
+{
+        return -EINVAL;
+}
+
+static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
+                                        unsigned offset, int value)
+{
+        struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+        void __iomem *base = ourchip->base;
+        unsigned long flags;
+        unsigned long dat;
+        unsigned long con;
+
+        local_irq_save(flags);
+
+        con = __raw_readl(base + 0x00);
+        dat = __raw_readl(base + 0x04);
+
+        dat &= ~(1 << offset);
+        if (value)
+                dat |= 1 << offset;
+
+        __raw_writel(dat, base + 0x04);
+
+        con &= ~(1 << offset);
+
+        __raw_writel(con, base + 0x00);
+        __raw_writel(dat, base + 0x04);
+
+        local_irq_restore(flags);
+        return 0;
+}
+
+
+struct s3c24xx_gpio_chip gpios[] = {
+        [0] = {
+                .base   = S3C24XX_GPIO_BASE(S3C2410_GPA0),
+                .chip   = {
+                        .base                   = S3C2410_GPA0,
+                        .owner                  = THIS_MODULE,
+                        .label                  = "GPIOA",
+                        .ngpio                  = 24,
+                        .direction_input        = s3c24xx_gpiolib_banka_input,
+                        .direction_output       = s3c24xx_gpiolib_banka_output,
+                        .set                    = s3c24xx_gpiolib_set,
+                        .get                    = s3c24xx_gpiolib_get,
+                },
+        },
+        [1] = {
+                .base   = S3C24XX_GPIO_BASE(S3C2410_GPB0),
+                .chip   = {
+                        .base                   = S3C2410_GPB0,
+                        .owner                  = THIS_MODULE,
+                        .label                  = "GPIOB",
+                        .ngpio                  = 16,
+                        .direction_input        = s3c24xx_gpiolib_input,
+                        .direction_output       = s3c24xx_gpiolib_output,
+                        .set                    = s3c24xx_gpiolib_set,
+                        .get                    = s3c24xx_gpiolib_get,
+                },
+        },
+        [2] = {
+                .base   = S3C24XX_GPIO_BASE(S3C2410_GPC0),
+                .chip   = {
+                        .base                   = S3C2410_GPC0,
+                        .owner                  = THIS_MODULE,
+                        .label                  = "GPIOC",
+                        .ngpio                  = 16,
+                        .direction_input        = s3c24xx_gpiolib_input,
+                        .direction_output       = s3c24xx_gpiolib_output,
+                        .set                    = s3c24xx_gpiolib_set,
+                        .get                    = s3c24xx_gpiolib_get,
+                },
+        },
+        [3] = {
+                .base   = S3C24XX_GPIO_BASE(S3C2410_GPD0),
+                .chip   = {
+                        .base                   = S3C2410_GPD0,
+                        .owner                  = THIS_MODULE,
+                        .label                  = "GPIOD",
+                        .ngpio                  = 16,
+                        .direction_input        = s3c24xx_gpiolib_input,
+                        .direction_output       = s3c24xx_gpiolib_output,
+                        .set                    = s3c24xx_gpiolib_set,
+                        .get                    = s3c24xx_gpiolib_get,
+                },
+        },
+        [4] = {
+                .base   = S3C24XX_GPIO_BASE(S3C2410_GPE0),
+                .chip   = {
+                        .base                   = S3C2410_GPE0,
+                        .label                  = "GPIOE",
+                        .owner                  = THIS_MODULE,
+                        .ngpio                  = 16,
+                        .direction_input        = s3c24xx_gpiolib_input,
+                        .direction_output       = s3c24xx_gpiolib_output,
+                        .set                    = s3c24xx_gpiolib_set,
+                        .get                    = s3c24xx_gpiolib_get,
+                },
+        },
+        [5] = {
+                .base   = S3C24XX_GPIO_BASE(S3C2410_GPF0),
+                .chip   = {
+                        .base                   = S3C2410_GPF0,
+                        .owner                  = THIS_MODULE,
+                        .label                  = "GPIOF",
+                        .ngpio                  = 8,
+                        .direction_input        = s3c24xx_gpiolib_input,
+                        .direction_output       = s3c24xx_gpiolib_output,
+                        .set                    = s3c24xx_gpiolib_set,
+                        .get                    = s3c24xx_gpiolib_get,
+                },
+        },
+        [6] = {
+                .base   = S3C24XX_GPIO_BASE(S3C2410_GPG0),
+                .chip   = {
+                        .base                   = S3C2410_GPG0,
+                        .owner                  = THIS_MODULE,
+                        .label                  = "GPIOG",
+                        .ngpio                  = 10,
+                        .direction_input        = s3c24xx_gpiolib_input,
+                        .direction_output       = s3c24xx_gpiolib_output,
+                        .set                    = s3c24xx_gpiolib_set,
+                        .get                    = s3c24xx_gpiolib_get,
+                },
+        },
+};
+
+static __init int s3c24xx_gpiolib_init(void)
+{
+        struct s3c24xx_gpio_chip *chip = gpios;
+        int gpn;
+
+        for (gpn = 0; gpn < ARRAY_SIZE(gpios); gpn++, chip++)
+                gpiochip_add(&chip->chip);
+
+        return 0;
+}
+
+arch_initcall(s3c24xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
new file mode 100644
index 000000000000..2cda3e3c6786
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -0,0 +1,437 @@
+/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Copyright (c) 2007, 2008 Ben Dooks
+ *      Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/plat-s3c/regs-timer.h>
+
+/* Each of the timers 0 through 5 go through the following
+ * clock tree, with the inputs depending on the timers.
+ *
+ * pclk ---- [ prescaler 0 ] -+---> timer 0
+ *                            +---> timer 1
+ *
+ * pclk ---- [ prescaler 1 ] -+---> timer 2
+ *                            +---> timer 3
+ *                            \---> timer 4
+ *
+ * Which are fed into the timers as so:
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ *                                     [mux] -> timer 0
+ * tclk 0 ------------------------------/
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ *                                     [mux] -> timer 1
+ * tclk 0 ------------------------------/
+ *
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ *                                     [mux] -> timer 2
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ *                                     [mux] -> timer 3
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8, 16 ] --\
+ *                                     [mux] -> timer 4
+ * tclk 1 ------------------------------/
+ *
+ * Since the mux and the divider are tied together in the
+ * same register space, it is impossible to set the parent
+ * and the rate at the same time. To avoid this, we add an
+ * intermediate 'prescaled-and-divided' clock to select
+ * as the parent for the timer input clock called tdiv.
+ *
+ * prescaled clk --> pwm-tdiv ---\
+ *                             [ mux ] --> timer X
+ * tclk -------------------------/
+*/
+
+static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
+{
+        unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+        if (clk->id == 1) {
+                tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
+                tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
+        } else {
+                tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
+        }
+
+        return clk_get_rate(clk->parent) / (tcfg0 + 1);
+}
+
+/* TODO - add set rate calls. */
+
+struct clk clk_timer_scaler[] = {
+        [0]     = {
+                .name           = "pwm-scaler0",
+                .id             = -1,
+                .get_rate       = clk_pwm_scaler_getrate,
+        },
+        [1]     = {
+                .name           = "pwm-scaler1",
+                .id             = -1,
+                .get_rate       = clk_pwm_scaler_getrate,
+        },
+};
+
+struct clk clk_timer_tclk[] = {
+        [0]     = {
+                .name           = "pwm-tclk0",
+                .id             = -1,
+        },
+        [1]     = {
+                .name           = "pwm-tclk1",
+                .id             = -1,
+        },
+};
+
+struct pwm_tdiv_clk {
+        struct clk      clk;
+        unsigned int    divisor;
+};
+
+static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
+{
+        return container_of(clk, struct pwm_tdiv_clk, clk);
+}
+
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+        return 1 << (1 + tcfg1);
+}
+
+static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
+{
+        unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+        unsigned int divisor;
+
+        tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+        tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+        if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+                divisor = to_tdiv(clk)->divisor;
+        else
+                divisor = tcfg_to_divisor(tcfg1);
+
+        return clk_get_rate(clk->parent) / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
+                                             unsigned long rate)
+{
+        unsigned long parent_rate;
+        unsigned long divisor;
+
+        parent_rate = clk_get_rate(clk->parent);
+        divisor = parent_rate / rate;
+
+        if (divisor <= 2)
+                divisor = 2;
+        else if (divisor <= 4)
+                divisor = 4;
+        else if (divisor <= 8)
+                divisor = 8;
+        else
+                divisor = 16;
+
+        return parent_rate / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
+{
+        unsigned long bits;
+
+        switch (divclk->divisor) {
+        case 2:
+                bits = S3C2410_TCFG1_MUX_DIV2;
+                break;
+        case 4:
+                bits = S3C2410_TCFG1_MUX_DIV4;
+                break;
+        case 8:
+                bits = S3C2410_TCFG1_MUX_DIV8;
+                break;
+        case 16:
+        default:
+                bits = S3C2410_TCFG1_MUX_DIV16;
+                break;
+        }
+
+        return bits;
+}
+
+static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
+{
+        unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+        unsigned long bits = clk_pwm_tdiv_bits(divclk);
+        unsigned long flags;
+        unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
+
+        local_irq_save(flags);
+
+        tcfg1 = __raw_readl(S3C2410_TCFG1);
+        tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+        tcfg1 |= bits << shift;
+        __raw_writel(tcfg1, S3C2410_TCFG1);
+
+        local_irq_restore(flags);
+}
+
+static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
+{
+        struct pwm_tdiv_clk *divclk = to_tdiv(clk);
+        unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+        unsigned long parent_rate = clk_get_rate(clk->parent);
+        unsigned long divisor;
+
+        tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+        tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+        rate = clk_round_rate(clk, rate);
+        divisor = parent_rate / rate;
+
+        if (divisor > 16)
+                return -EINVAL;
+
+        divclk->divisor = divisor;
+
+        /* Update the current MUX settings if we are currently
+         * selected as the clock source for this clock. */
+
+        if (tcfg1 != S3C2410_TCFG1_MUX_TCLK)
+                clk_pwm_tdiv_update(divclk);
+
+        return 0;
+}
+
+struct pwm_tdiv_clk clk_timer_tdiv[] = {
+        [0]     = {
+                .clk    = {
+                        .name           = "pwm-tdiv",
+                        .parent         = &clk_timer_scaler[0],
+                        .get_rate       = clk_pwm_tdiv_get_rate,
+                        .set_rate       = clk_pwm_tdiv_set_rate,
+                        .round_rate     = clk_pwm_tdiv_round_rate,
+                },
+        },
+        [1]     = {
+                .clk    = {
+                        .name           = "pwm-tdiv",
+                        .parent         = &clk_timer_scaler[0],
+                        .get_rate       = clk_pwm_tdiv_get_rate,
+                        .set_rate       = clk_pwm_tdiv_set_rate,
+                        .round_rate     = clk_pwm_tdiv_round_rate,
+                }
+        },
+        [2]     = {
+                .clk    = {
+                        .name           = "pwm-tdiv",
+                        .parent         = &clk_timer_scaler[1],
+                        .get_rate       = clk_pwm_tdiv_get_rate,
+                        .set_rate       = clk_pwm_tdiv_set_rate,
+                        .round_rate     = clk_pwm_tdiv_round_rate,
+                },
+        },
+        [3]     = {
+                .clk    = {
+                        .name           = "pwm-tdiv",
+                        .parent         = &clk_timer_scaler[1],
+                        .get_rate       = clk_pwm_tdiv_get_rate,
+                        .set_rate       = clk_pwm_tdiv_set_rate,
+                        .round_rate     = clk_pwm_tdiv_round_rate,
+                },
+        },
+        [4]     = {
+                .clk    = {
+                        .name           = "pwm-tdiv",
+                        .parent         = &clk_timer_scaler[1],
+                        .get_rate       = clk_pwm_tdiv_get_rate,
+                        .set_rate       = clk_pwm_tdiv_set_rate,
+                        .round_rate     = clk_pwm_tdiv_round_rate,
+                },
+        },
+};
+
+static int __init clk_pwm_tdiv_register(unsigned int id)
+{
+        struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
+        unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+
+        tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+        tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+        divclk->clk.id = id;
+        divclk->divisor = tcfg_to_divisor(tcfg1);
+
+        return s3c24xx_register_clock(&divclk->clk);
+}
+
+static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
+{
+        return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
+}
+
+static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
+{
+        return &clk_timer_tdiv[id].clk;
+}
+
+static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
+{
+        unsigned int id = clk->id;
+        unsigned long tcfg1;
+        unsigned long flags;
+        unsigned long bits;
+        unsigned long shift = S3C2410_TCFG1_SHIFT(id);
+
+        if (parent == s3c24xx_pwmclk_tclk(id))
+                bits = S3C2410_TCFG1_MUX_TCLK << shift;
+        else if (parent == s3c24xx_pwmclk_tdiv(id))
+                bits = clk_pwm_tdiv_bits(to_tdiv(clk)) << shift;
+        else
+                return -EINVAL;
+
+        clk->parent = parent;
+
+        local_irq_save(flags);
+
+        tcfg1 = __raw_readl(S3C2410_TCFG1);
+        tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+        __raw_writel(tcfg1 | bits, S3C2410_TCFG1);
+
+        local_irq_restore(flags);
+
+        return 0;
+}
+
+static struct clk clk_tin[] = {
+        [0]     = {
+                .name           = "pwm-tin",
+                .id             = 0,
+                .set_parent     = clk_pwm_tin_set_parent,
+        },
+        [1]     = {
+                .name           = "pwm-tin",
+                .id             = 1,
+                .set_parent     = clk_pwm_tin_set_parent,
+        },
+        [2]     = {
+                .name           = "pwm-tin",
+                .id             = 2,
+                .set_parent     = clk_pwm_tin_set_parent,
+        },
+        [3]     = {
+                .name           = "pwm-tin",
+                .id             = 3,
+                .set_parent     = clk_pwm_tin_set_parent,
+        },
+        [4]     = {
+                .name           = "pwm-tin",
+                .id             = 4,
+                .set_parent     = clk_pwm_tin_set_parent,
+        },
+};
+
+static __init int clk_pwm_tin_register(struct clk *pwm)
+{
+        unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+        unsigned int id = pwm->id;
+
+        struct clk *parent;
+        int ret;
+
+        ret = s3c24xx_register_clock(pwm);
+        if (ret < 0)
+                return ret;
+
+        tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+        tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+        if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+                parent = s3c24xx_pwmclk_tclk(id);
+        else
+                parent = s3c24xx_pwmclk_tdiv(id);
+
+        return clk_set_parent(pwm, parent);
+}
+
+static __init int s3c24xx_pwmclk_init(void)
+{
+        struct clk *clk_timers;
+        unsigned int clk;
+        int ret;
+
+        clk_timers = clk_get(NULL, "timers");
+        if (IS_ERR(clk_timers)) {
+                printk(KERN_ERR "%s: no parent clock\n", __func__);
+                return -EINVAL;
+        }
+
+        for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
+                clk_timer_scaler[clk].parent = clk_timers;
+                ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
+                if (ret < 0) {
+                        printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
+                        goto err;
+                }
+        }
+
+        for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
+                ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
+                if (ret < 0) {
+                        printk(KERN_ERR "error adding pww tclk%d\n", clk);
+                        goto err;
+                }
+        }
+
+        for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
+                ret = clk_pwm_tdiv_register(clk);
+                if (ret < 0) {
+                        printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
+                        goto err;
+                }
+        }
+
+        for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
+                ret = clk_pwm_tin_register(&clk_tin[clk]);
+                if (ret < 0) {
+                        printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
+                        goto err;
+                }
+        }
+
+        return 0;
+
+ err:
+        return ret;
+}
+
+arch_initcall(s3c24xx_pwmclk_init);
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
new file mode 100644
index 000000000000..18c4bdc49a05
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -0,0 +1,402 @@
+/* arch/arm/plat-s3c24xx/pwm.c
+ *
+ * Copyright (c) 2007 Ben Dooks
+ * Copyright (c) 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * S3C24XX PWM device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/plat-s3c/regs-timer.h>
+
+struct pwm_device {
+        struct list_head         list;
+        struct platform_device  *pdev;
+
+        struct clk              *clk_div;
+        struct clk              *clk;
+        const char              *label;
+
+        unsigned int             period_ns;
+        unsigned int             duty_ns;
+
+        unsigned char            tcon_base;
+        unsigned char            running;
+        unsigned char            use_count;
+        unsigned char            pwm_id;
+};
+
+#define pwm_dbg(_pwm, msg...) dev_info(&(_pwm)->pdev->dev, msg)
+
+static struct clk *clk_scaler[2];
+
+/* Standard setup for a timer block. */
+
+#define TIMER_RESOURCE_SIZE (1)
+
+#define TIMER_RESOURCE(_tmr, _irq)                      \
+        (struct resource [TIMER_RESOURCE_SIZE]) {       \
+                [0] = {                                 \
+                        .start  = _irq,                 \
+                        .end    = _irq,                 \
+                        .flags  = IORESOURCE_IRQ        \
+                }                                       \
+        }
+
+#define DEFINE_TIMER(_tmr_no, _irq)                     \
+        .name           = "s3c24xx-pwm",                \
+        .id             = _tmr_no,                      \
+        .num_resources  = TIMER_RESOURCE_SIZE,          \
+        .resource       = TIMER_RESOURCE(_tmr_no, _irq),        \
+
+/* since we already have an static mapping for the timer, we do not
+ * bother setting any IO resource for the base.
+ */
+
+struct platform_device s3c_device_timer[] = {
+        [0] = { DEFINE_TIMER(0, IRQ_TIMER0) },
+        [1] = { DEFINE_TIMER(1, IRQ_TIMER1) },
+        [2] = { DEFINE_TIMER(2, IRQ_TIMER2) },
+        [3] = { DEFINE_TIMER(3, IRQ_TIMER3) },
+        [4] = { DEFINE_TIMER(4, IRQ_TIMER4) },
+};
+
+static inline int pwm_is_tdiv(struct pwm_device *pwm)
+{
+        return clk_get_parent(pwm->clk) == pwm->clk_div;
+}
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+        struct pwm_device *pwm;
+        int found = 0;
+
+        mutex_lock(&pwm_lock);
+
+        list_for_each_entry(pwm, &pwm_list, list) {
+                if (pwm->pwm_id == pwm_id) {
+                        found = 1;
+                        break;
+                }
+        }
+
+        if (found) {
+                if (pwm->use_count == 0) {
+                        pwm->use_count = 1;
+                        pwm->label = label;
+                } else
+                        pwm = ERR_PTR(-EBUSY);
+        } else
+                pwm = ERR_PTR(-ENOENT);
+
+        mutex_unlock(&pwm_lock);
+        return pwm;
+}
+
+EXPORT_SYMBOL(pwm_request);
+
+
+void pwm_free(struct pwm_device *pwm)
+{
+        mutex_lock(&pwm_lock);
+
+        if (pwm->use_count) {
+                pwm->use_count--;
+                pwm->label = NULL;
+        } else
+                printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
+
+        mutex_unlock(&pwm_lock);
+}
+
+EXPORT_SYMBOL(pwm_free);
+
+#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
+#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
+#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
+#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
+
+int pwm_enable(struct pwm_device *pwm)
+{
+        unsigned long flags;
+        unsigned long tcon;
+
+        local_irq_save(flags);
+
+        tcon = __raw_readl(S3C2410_TCON);
+        tcon |= pwm_tcon_start(pwm);
+        __raw_writel(tcon, S3C2410_TCON);
+
+        local_irq_restore(flags);
+
+        pwm->running = 1;
+        return 0;
+}
+
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+        unsigned long flags;
+        unsigned long tcon;
+
+        local_irq_save(flags);
+
+        tcon = __raw_readl(S3C2410_TCON);
+        tcon &= ~pwm_tcon_start(pwm);
+        __raw_writel(tcon, S3C2410_TCON);
+
+        local_irq_restore(flags);
+
+        pwm->running = 0;
+}
+
+EXPORT_SYMBOL(pwm_disable);
+
+unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+{
+        unsigned long tin_parent_rate;
+        unsigned int div;
+
+        tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
+        pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
+
+        for (div = 2; div <= 16; div *= 2) {
+                if ((tin_parent_rate / (div << 16)) < freq)
+                        return tin_parent_rate / div;
+        }
+
+        return tin_parent_rate / 16;
+}
+
+#define NS_IN_HZ (1000000000UL)
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+        unsigned long tin_rate;
+        unsigned long tin_ns;
+        unsigned long period;
+        unsigned long flags;
+        unsigned long tcon;
+        unsigned long tcnt;
+        long tcmp;
+
+        /* We currently avoid using 64bit arithmetic by using the
+         * fact that anything faster than 1Hz is easily representable
+         * by 32bits. */
+
+        if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
+                return -ERANGE;
+
+        if (duty_ns > period_ns)
+                return -EINVAL;
+
+        if (period_ns == pwm->period_ns &&
+            duty_ns == pwm->duty_ns)
+                return 0;
+
+        /* The TCMP and TCNT can be read without a lock, they're not
+         * shared between the timers. */
+
+        tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
+        tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
+
+        period = NS_IN_HZ / period_ns;
+
+        pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
+                duty_ns, period_ns, period);
+
+        /* Check to see if we are changing the clock rate of the PWM */
+
+        if (pwm->period_ns != period_ns) {
+                if (pwm_is_tdiv(pwm)) {
+                        tin_rate = pwm_calc_tin(pwm, period);
+                        clk_set_rate(pwm->clk_div, tin_rate);
+                } else
+                        tin_rate = clk_get_rate(pwm->clk);
+
+                pwm->period_ns = period_ns;
+
+                pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
+
+                tin_ns = NS_IN_HZ / tin_rate;
+                tcnt = period_ns / tin_ns;
+        } else
+                tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
+
+        /* Note, counters count down */
+
+        tcmp = duty_ns / tin_ns;
+        tcmp = tcnt - tcmp;
+
+        pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
+
+        if (tcmp < 0)
+                tcmp = 0;
+
+        /* Update the PWM register block. */
+
+        local_irq_save(flags);
+
+        __raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
+        __raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
+
+        tcon = __raw_readl(S3C2410_TCON);
+        tcon |= pwm_tcon_manulupdate(pwm);
+        tcon |= pwm_tcon_autoreload(pwm);
+        __raw_writel(tcon, S3C2410_TCON);
+
+        tcon &= ~pwm_tcon_manulupdate(pwm);
+        __raw_writel(tcon, S3C2410_TCON);
+
+        local_irq_restore(flags);
+
+        return 0;
+}
+
+EXPORT_SYMBOL(pwm_config);
+
+static int pwm_register(struct pwm_device *pwm)
+{
+        pwm->duty_ns = -1;
+        pwm->period_ns = -1;
+
+        mutex_lock(&pwm_lock);
+        list_add_tail(&pwm->list, &pwm_list);
+        mutex_unlock(&pwm_lock);
+
+        return 0;
+}
+
+static int s3c_pwm_probe(struct platform_device *pdev)
+{
+        struct device *dev = &pdev->dev;
+        struct pwm_device *pwm;
+        unsigned long flags;
+        unsigned long tcon;
+        unsigned int id = pdev->id;
+        int ret;
+
+        if (id == 4) {
+                dev_err(dev, "TIMER4 is currently not supported\n");
+                return -ENXIO;
+        }
+
+        pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+        if (pwm == NULL) {
+                dev_err(dev, "failed to allocate pwm_device\n");
+                return -ENOMEM;
+        }
+
+        pwm->pdev = pdev;
+        pwm->pwm_id = id;
+
+        /* calculate base of control bits in TCON */
+        pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
+
+        pwm->clk = clk_get(dev, "pwm-tin");
+        if (IS_ERR(pwm->clk)) {
+                dev_err(dev, "failed to get pwm tin clk\n");
+                ret = PTR_ERR(pwm->clk);
+                goto err_alloc;
+        }
+
+        pwm->clk_div = clk_get(dev, "pwm-tdiv");
+        if (IS_ERR(pwm->clk_div)) {
+                dev_err(dev, "failed to get pwm tdiv clk\n");
+                ret = PTR_ERR(pwm->clk_div);
+                goto err_clk_tin;
+        }
+
+        local_irq_save(flags);
+
+        tcon = __raw_readl(S3C2410_TCON);
+        tcon |= pwm_tcon_invert(pwm);
+        __raw_writel(tcon, S3C2410_TCON);
+
+        local_irq_restore(flags);
+
+
+        ret = pwm_register(pwm);
+        if (ret) {
+                dev_err(dev, "failed to register pwm\n");
+                goto err_clk_tdiv;
+        }
+
+        pwm_dbg(pwm, "config bits %02x\n",
+                (__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
+
+        dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
+                 clk_get_rate(pwm->clk),
+                 clk_get_rate(pwm->clk_div),
+                 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
+
+        platform_set_drvdata(pdev, pwm);
+        return 0;
+
+ err_clk_tdiv:
+        clk_put(pwm->clk_div);
+
+ err_clk_tin:
+        clk_put(pwm->clk);
+
+ err_alloc:
+        kfree(pwm);
+        return ret;
+}
+
+static int s3c_pwm_remove(struct platform_device *pdev)
+{
+        struct pwm_device *pwm = platform_get_drvdata(pdev);
+
+        clk_put(pwm->clk_div);
+        clk_put(pwm->clk);
+        kfree(pwm);
+
+        return 0;
+}
+
+static struct platform_driver s3c_pwm_driver = {
+        .driver         = {
+                .name   = "s3c24xx-pwm",
+                .owner  = THIS_MODULE,
+        },
+        .probe          = s3c_pwm_probe,
+        .remove         = __devexit_p(s3c_pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+        int ret;
+
+        clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
+        clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
+
+        if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
+                printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
+                return -EINVAL;
+        }
+
+        ret = platform_driver_register(&s3c_pwm_driver);
+        if (ret)
+                printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
+
+        return ret;
+}
+
+arch_initcall(pwm_init);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 207a8b5a0c4a..8b8f564c3aa2 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Apr 19 11:23:38 2008
+# Last update: Sun Jul 13 12:04:05 2008
 #
 # machine_is_xxx        CONFIG_xxxx             MACH_TYPE_xxx           number
 #
@@ -560,7 +560,6 @@ husky			MACH_HUSKY		HUSKY			543
 boxer                   MACH_BOXER              BOXER                   544
 shepherd                MACH_SHEPHERD           SHEPHERD                545
 aml42800aa              MACH_AML42800AA         AML42800AA              546
-ml674001                MACH_MACH_TYPE_ML674001 MACH_TYPE_ML674001      547
 lpc2294                 MACH_LPC2294            LPC2294                 548
 switchgrass             MACH_SWITCHGRASS        SWITCHGRASS             549
 ens_cmu                 MACH_ENS_CMU            ENS_CMU                 550
@@ -748,7 +747,6 @@ anubis			MACH_ANUBIS		ANUBIS			734
 ite8152                 MACH_ITE8152            ITE8152                 735
 lpc3xxx                 MACH_LPC3XXX            LPC3XXX                 736
 puppeteer               MACH_PUPPETEER          PUPPETEER               737
-vt001                   MACH_MACH_VADATECH      MACH_VADATECH           738
 e570                    MACH_E570               E570                    739
 x50                     MACH_X50                X50                     740
 recon                   MACH_RECON              RECON                   741
@@ -839,7 +837,7 @@ ccxp270			MACH_CCXP		CCXP			825
 omap_gsample            MACH_OMAP_GSAMPLE       OMAP_GSAMPLE            826
 realview_eb             MACH_REALVIEW_EB        REALVIEW_EB             827
 samoa                   MACH_SAMOA              SAMOA                   828
-t3xscale                MACH_T3XSCALE           T3XSCALE                829
+palmt3                  MACH_PALMT3             PALMT3                  829
 i878                    MACH_I878               I878                    830
 borzoi                  MACH_BORZOI             BORZOI                  831
 gecko                   MACH_GECKO              GECKO                   832
@@ -895,7 +893,7 @@ mio8390			MACH_MIO8390		MIO8390			881
 omi_board               MACH_OMI_BOARD          OMI_BOARD               882
 mx21civ                 MACH_MX21CIV            MX21CIV                 883
 mahi_cdac               MACH_MAHI_CDAC          MAHI_CDAC               884
-xscale_palmtx           MACH_XSCALE_PALMTX      XSCALE_PALMTX           885
+palmtx                  MACH_PALMTX             PALMTX                  885
 s3c2413                 MACH_S3C2413            S3C2413                 887
 samsys_ep0              MACH_SAMSYS_EP0         SAMSYS_EP0              888
 wg302v1                 MACH_WG302V1            WG302V1                 889
@@ -918,7 +916,7 @@ nxdb500			MACH_NXDB500		NXDB500			905
 apf9328                 MACH_APF9328            APF9328                 906
 omap_wipoq              MACH_OMAP_WIPOQ         OMAP_WIPOQ              907
 omap_twip               MACH_OMAP_TWIP          OMAP_TWIP               908
-xscale_treo650          MACH_XSCALE_PALMTREO650 XSCALE_PALMTREO650      909
+palmtreo650             MACH_PALMTREO650        PALMTREO650             909
 acumen                  MACH_ACUMEN             ACUMEN                  910
 xp100                   MACH_XP100              XP100                   911
 fs2410                  MACH_FS2410             FS2410                  912
@@ -926,8 +924,8 @@ pxa270_cerf		MACH_PXA270_CERF	PXA270_CERF		913
 sq2ftlpalm              MACH_SQ2FTLPALM         SQ2FTLPALM              914
 bsemserver              MACH_BSEMSERVER         BSEMSERVER              915
 netclient               MACH_NETCLIENT          NETCLIENT               916
-xscale_palmtt5          MACH_XSCALE_PALMTT5     XSCALE_PALMTT5          917
-xscale_palmtc           MACH_OMAP_PALMTC        OMAP_PALMTC             918
+palmt5                  MACH_PALMT5             PALMT5                  917
+palmtc                  MACH_PALMTC             PALMTC                  918
 omap_apollon            MACH_OMAP_APOLLON       OMAP_APOLLON            919
 mxc30030evb             MACH_MXC30030EVB        MXC30030EVB             920
 rea_2d                  MACH_REA_2D             REA_2D                  921
@@ -1220,7 +1218,6 @@ empca400		MACH_EMPCA400		EMPCA400		1211
 em7210                  MACH_EM7210             EM7210                  1212
 htchermes               MACH_HTCHERMES          HTCHERMES               1213
 eti_c1                  MACH_ETI_C1             ETI_C1                  1214
-mach_dep2410            MACH_MACH_DEP2410       MACH_DEP2410            1215
 ac100                   MACH_AC100              AC100                   1216
 sneetch                 MACH_SNEETCH            SNEETCH                 1217
 studentmate             MACH_STUDENTMATE        STUDENTMATE             1218
@@ -1421,10 +1418,10 @@ looxc550		MACH_LOOXC550		LOOXC550		1417
 cnty_titan              MACH_CNTY_TITAN         CNTY_TITAN              1418
 app3xx                  MACH_APP3XX             APP3XX                  1419
 sideoatsgrama           MACH_SIDEOATSGRAMA      SIDEOATSGRAMA           1420
-xscale_palmt700p        MACH_XSCALE_PALMT700P   XSCALE_PALMT700P        1421
-xscale_palmt700w        MACH_XSCALE_PALMT700W   XSCALE_PALMT700W        1422
-xscale_palmt750         MACH_XSCALE_PALMT750    XSCALE_PALMT750         1423
-xscale_palmt755p        MACH_XSCALE_PALMT755P   XSCALE_PALMT755P        1424
+palmtreo700p            MACH_PALMTREO700P       PALMTREO700P            1421
+palmtreo700w            MACH_PALMTREO700W       PALMTREO700W            1422
+palmtreo750             MACH_PALMTREO750        PALMTREO750             1423
+palmtreo755p            MACH_PALMTREO755P       PALMTREO755P            1424
 ezreganut9200           MACH_EZREGANUT9200      EZREGANUT9200           1425
 sarge                   MACH_SARGE              SARGE                   1426
 a696                    MACH_A696               A696                    1427
@@ -1463,7 +1460,7 @@ artemis			MACH_ARTEMIS		ARTEMIS			1462
 htctitan                MACH_HTCTITAN           HTCTITAN                1463
 qranium                 MACH_QRANIUM            QRANIUM                 1464
 adx_wsc2                MACH_ADX_WSC2           ADX_WSC2                1465
-adx_medcom              MACH_ADX_MEDINET        ADX_MEDINET             1466
+adx_medcom              MACH_ADX_MEDCOM         ADX_MEDCOM              1466
 bboard                  MACH_BBOARD             BBOARD                  1467
 cambria                 MACH_CAMBRIA            CAMBRIA                 1468
 mt7xxx                  MACH_MT7XXX             MT7XXX                  1469
@@ -1519,7 +1516,7 @@ wp188			MACH_WP188		WP188			1518
 corsica                 MACH_CORSICA            CORSICA                 1519
 bigeye                  MACH_BIGEYE             BIGEYE                  1520
 tll5000                 MACH_TLL5000            TLL5000                 1522
-hni270                  MACH_HNI_X270           HNI_X270                1523
+bebot                   MACH_BEBOT              BEBOT                   1523
 qong                    MACH_QONG               QONG                    1524
 tcompact                MACH_TCOMPACT           TCOMPACT                1525
 puma5                   MACH_PUMA5              PUMA5                   1526
@@ -1636,7 +1633,6 @@ awlug4lcu		MACH_AWLUG4LCU		AWLUG4LCU		1637
 palermoc                MACH_PALERMOC           PALERMOC                1638
 omap_ldp                MACH_OMAP_LDP           OMAP_LDP                1639
 ip500                   MACH_IP500              IP500                   1640
-mx35ads                 MACH_MACH_MX35ADS       MACH_MX35ADS            1641
 ase2                    MACH_ASE2               ASE2                    1642
 mx35evb                 MACH_MX35EVB            MX35EVB                 1643
 aml_m8050               MACH_AML_M8050          AML_M8050               1644
@@ -1647,7 +1643,7 @@ badger			MACH_BADGER		BADGER			1648
 trizeps4wl              MACH_TRIZEPS4WL         TRIZEPS4WL              1649
 trizeps5                MACH_TRIZEPS5           TRIZEPS5                1650
 marlin                  MACH_MARLIN             MARLIN                  1651
-ts7800                  MACH_TS7800             TS7800                  1652
+ts78xx                  MACH_TS78XX             TS78XX                  1652
 hpipaq214               MACH_HPIPAQ214          HPIPAQ214               1653
 at572d940dcm            MACH_AT572D940DCM       AT572D940DCM            1654
 ne1board                MACH_NE1BOARD           NE1BOARD                1655
@@ -1720,3 +1716,107 @@ htc_kaiser		MACH_HTC_KAISER		HTC_KAISER		1724
 lg_ks20                 MACH_LG_KS20            LG_KS20                 1725
 hhgps                   MACH_HHGPS              HHGPS                   1726
 nokia_n810_wimax        MACH_NOKIA_N810_WIMAX   NOKIA_N810_WIMAX        1727
+insight                 MACH_INSIGHT            INSIGHT                 1728
+sapphire                MACH_SAPPHIRE           SAPPHIRE                1729
+csb637xo                MACH_CSB637XO           CSB637XO                1730
+evisiong                MACH_EVISIONG           EVISIONG                1731
+stmp37xx                MACH_STMP37XX           STMP37XX                1732
+stmp378x                MACH_STMP38XX           STMP38XX                1733
+tnt                     MACH_TNT                TNT                     1734
+tbxt                    MACH_TBXT               TBXT                    1735
+playmate                MACH_PLAYMATE           PLAYMATE                1736
+pns10                   MACH_PNS10              PNS10                   1737
+eznavi                  MACH_EZNAVI             EZNAVI                  1738
+ps4000                  MACH_PS4000             PS4000                  1739
+ezx_a780                MACH_EZX_A780           EZX_A780                1740
+ezx_e680                MACH_EZX_E680           EZX_E680                1741
+ezx_a1200               MACH_EZX_A1200          EZX_A1200               1742
+ezx_e6                  MACH_EZX_E6             EZX_E6                  1743
+ezx_e2                  MACH_EZX_E2             EZX_E2                  1744
+ezx_a910                MACH_EZX_A910           EZX_A910                1745
+cwmx31                  MACH_CWMX31             CWMX31                  1746
+sl2312                  MACH_SL2312             SL2312                  1747
+blenny                  MACH_BLENNY             BLENNY                  1748
+ds107                   MACH_DS107              DS107                   1749
+dsx07                   MACH_DSX07              DSX07                   1750
+picocom1                MACH_PICOCOM1           PICOCOM1                1751
+lynx_wolverine          MACH_LYNX_WOLVERINE     LYNX_WOLVERINE          1752
+ubisys_p9_sc19          MACH_UBISYS_P9_SC19     UBISYS_P9_SC19          1753
+kratos_low              MACH_KRATOS_LOW         KRATOS_LOW              1754
+m700                    MACH_M700               M700                    1755
+edmini_v2               MACH_EDMINI_V2          EDMINI_V2               1756
+zipit2                  MACH_ZIPIT2             ZIPIT2                  1757
+hslfemtocell            MACH_HSLFEMTOCELL       HSLFEMTOCELL            1758
+daintree_at91           MACH_DAINTREE_AT91      DAINTREE_AT91           1759
+sg560usb                MACH_SG560USB           SG560USB                1760
+omap3_pandora           MACH_OMAP3_PANDORA      OMAP3_PANDORA           1761
+usr8200                 MACH_USR8200            USR8200                 1762
+s1s65k                  MACH_S1S65K             S1S65K                  1763
+s2s65a                  MACH_S2S65A             S2S65A                  1764
+icore                   MACH_ICORE              ICORE                   1765
+mss2                    MACH_MSS2               MSS2                    1766
+belmont                 MACH_BELMONT            BELMONT                 1767
+asusp525                MACH_ASUSP525           ASUSP525                1768
+lb88rc8480              MACH_LB88RC8480         LB88RC8480              1769
+hipxa                   MACH_HIPXA              HIPXA                   1770
+mx25_3ds                MACH_MX25_3DS           MX25_3DS                1771
+m800                    MACH_M800               M800                    1772
+omap3530_lv_som         MACH_OMAP3530_LV_SOM    OMAP3530_LV_SOM         1773
+prima_evb               MACH_PRIMA_EVB          PRIMA_EVB               1774
+mx31bt1                 MACH_MX31BT1            MX31BT1                 1775
+atlas4_evb              MACH_ATLAS4_EVB         ATLAS4_EVB              1776
+mx31cicada              MACH_MX31CICADA         MX31CICADA              1777
+mi424wr                 MACH_MI424WR            MI424WR                 1778
+axs_ultrax              MACH_AXS_ULTRAX         AXS_ULTRAX              1779
+at572d940deb            MACH_AT572D940DEB       AT572D940DEB            1780
+davinci_da8xx_evm       MACH_DAVINCI_DA8XX_EVM  DAVINCI_DA8XX_EVM       1781
+ep9302                  MACH_EP9302             EP9302                  1782
+at572d940hfeb           MACH_AT572D940HFEB      AT572D940HFEB           1783
+cybook3                 MACH_CYBOOK3            CYBOOK3                 1784
+wdg002                  MACH_WDG002             WDG002                  1785
+sg560adsl               MACH_SG560ADSL          SG560ADSL               1786
+nextio_n2800_ica        MACH_NEXTIO_N2800_ICA   NEXTIO_N2800_ICA        1787
+marvell_newdb           MACH_MARVELL_NEWDB      MARVELL_NEWDB           1789
+vandihud                MACH_VANDIHUD           VANDIHUD                1790
+magx_e8                 MACH_MAGX_E8            MAGX_E8                 1791
+magx_z6                 MACH_MAGX_Z6            MAGX_Z6                 1792
+magx_v8                 MACH_MAGX_V8            MAGX_V8                 1793
+magx_u9                 MACH_MAGX_U9            MAGX_U9                 1794
+toughcf08               MACH_TOUGHCF08          TOUGHCF08               1795
+zw4400                  MACH_ZW4400             ZW4400                  1796
+marat91                 MACH_MARAT91            MARAT91                 1797
+overo                   MACH_OVERO              OVERO                   1798
+at2440evb               MACH_AT2440EVB          AT2440EVB               1799
+neocore926              MACH_NEOCORE926         NEOCORE926              1800
+wnr854t                 MACH_WNR854T            WNR854T                 1801
+imx27                   MACH_IMX27              IMX27                   1802
+moose_db                MACH_MOOSE_DB           MOOSE_DB                1803
+fab4                    MACH_FAB4               FAB4                    1804
+htcdiamond              MACH_HTCDIAMOND         HTCDIAMOND              1805
+fiona                   MACH_FIONA              FIONA                   1806
+mxc30030_x              MACH_MXC30030_X         MXC30030_X              1807
+bmp1000                 MACH_BMP1000            BMP1000                 1808
+logi9200                MACH_LOGI9200           LOGI9200                1809
+tqma31                  MACH_TQMA31             TQMA31                  1810
+ccw9p9215js             MACH_CCW9P9215JS        CCW9P9215JS             1811
+rd88f5181l_ge           MACH_RD88F5181L_GE      RD88F5181L_GE           1812
+sifmain                 MACH_SIFMAIN            SIFMAIN                 1813
+sam9_l9261              MACH_SAM9_L9261         SAM9_L9261              1814
+cc9m2443js              MACH_CC9M2443JS         CC9M2443JS              1815
+xaria300                MACH_XARIA300           XARIA300                1816
+it9200                  MACH_IT9200             IT9200                  1817
+rd88f5181l_fxo          MACH_RD88F5181L_FXO     RD88F5181L_FXO          1818
+kriss_sensor            MACH_KRISS_SENSOR       KRISS_SENSOR            1819
+pilz_pmi5               MACH_PILZ_PMI5          PILZ_PMI5               1820
+jade                    MACH_JADE               JADE                    1821
+ks8695_softplc          MACH_KS8695_SOFTPLC     KS8695_SOFTPLC          1822
+gprisc4                 MACH_GPRISC4            GPRISC4                 1823
+stamp9260               MACH_STAMP9260          STAMP9260               1824
+smdk6430                MACH_SMDK6430           SMDK6430                1825
+smdkc100                MACH_SMDKC100           SMDKC100                1826
+tavorevb                MACH_TAVOREVB           TAVOREVB                1827
+saar                    MACH_SAAR               SAAR                    1828
+deister_eyecam          MACH_DEISTER_EYECAM     DEISTER_EYECAM          1829
+at91sam9m10ek           MACH_AT91SAM9M10EK      AT91SAM9M10EK           1830
+linkstation_produo      MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO      1831
+hit_b0                  MACH_HIT_B0             HIT_B0                  1832
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 32455c633f1c..c0d2c9bb952b 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -352,7 +352,7 @@ static int __init vfp_init(void)
         else if (vfpsid & FPSID_NODOUBLE) {
                 printk("no double precision support\n");
         } else {
-                smp_call_function(vfp_enable, NULL, 1, 1);
+                smp_call_function(vfp_enable, NULL, 1);
 
                 VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;  /* Extract the architecture version */
                 printk("implementor %02x architecture %d part %02x variant %x rev %x\n",