Merge branch 'x86/urgent' of into irq/sparseirq

Reason: Pull in the latest io_apic bugfixes

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

28 files changed, 220 insertions, 75 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 553b7cf17bfb..88c97bc7a6f5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -271,7 +271,6 @@ config ARCH_AT91
         bool "Atmel AT91"
         select ARCH_REQUIRE_GPIOLIB
         select HAVE_CLK
-        select ARCH_USES_GETTIMEOFFSET
         help
           This enables support for systems based on the Atmel AT91RM9200,
           AT91SAM9 and AT91CAP9 processors.
@@ -1051,6 +1050,32 @@ config ARM_ERRATA_460075
           ACTLR register. Note that setting specific bits in the ACTLR register
           may not be available in non-secure mode.
 
+config ARM_ERRATA_742230
+        bool "ARM errata: DMB operation may be faulty"
+        depends on CPU_V7 && SMP
+        help
+          This option enables the workaround for the 742230 Cortex-A9
+          (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
+          between two write operations may not ensure the correct visibility
+          ordering of the two writes. This workaround sets a specific bit in
+          the diagnostic register of the Cortex-A9 which causes the DMB
+          instruction to behave as a DSB, ensuring the correct behaviour of
+          the two writes.
+
+config ARM_ERRATA_742231
+        bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
+        depends on CPU_V7 && SMP
+        help
+          This option enables the workaround for the 742231 Cortex-A9
+          (r2p0..r2p2) erratum. Under certain conditions, specific to the
+          Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
+          accessing some data located in the same cache line, may get corrupted
+          data due to bad handling of the address hazard when the line gets
+          replaced from one of the CPUs at the same time as another CPU is
+          accessing it. This workaround sets specific bits in the diagnostic
+          register of the Cortex-A9 which reduces the linefill issuing
+          capabilities of the processor.
+
 config PL310_ERRATA_588369
         bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
         depends on CACHE_L2X0 && ARCH_OMAP4
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index b23f6bc46cfa..65a7c1c588a9 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -116,5 +116,5 @@ CFLAGS_font.o := -Dstatic=
 $(obj)/font.c: $(FONTC)
         $(call cmd,shipped)
 
-$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
+$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
         @sed "$(SEDFLAGS)" < $< > $@
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 7974baacafce..1bec96e85196 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -271,6 +271,14 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
                 ((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
 }
 
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+        if (mask >= PHYS_OFFSET + SZ_64M - 1)
+                return 0;
+
+        return -EIO;
+}
+
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
         it8152_io.start = IT8152_IO_BASE + 0x12000;
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index ab68cf1ef80f..e90b167ea848 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -317,6 +317,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
 #define pgprot_dmacoherent(prot) \
         __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+                                     unsigned long size, pgprot_t vma_prot);
 #else
 #define pgprot_dmacoherent(prot) \
         __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 1b560825e1cf..7885722bdf4e 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -48,6 +48,8 @@ work_pending:
         beq     no_work_pending
         mov     r0, sp                          @ 'regs'
         mov     r2, why                         @ 'syscall'
+        tst     r1, #_TIF_SIGPENDING            @ delivering a signal?
+        movne   why, #0                         @ prevent further restarts
         bl      do_notify_resume
         b       ret_slow_syscall                @ Check work again
 
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 5e71ccd5e7d3..1276babf84d5 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -426,7 +426,7 @@ static struct i2c_gpio_platform_data pdata_i2c0 = {
         .sda_is_open_drain      = 1,
         .scl_pin                = AT91_PIN_PA21,
         .scl_is_open_drain      = 1,
-        .udelay                 = 2,            /* ~100 kHz */
+        .udelay                 = 5,            /* ~100 kHz */
 };
 
 static struct platform_device at91sam9g45_twi0_device = {
@@ -440,7 +440,7 @@ static struct i2c_gpio_platform_data pdata_i2c1 = {
         .sda_is_open_drain      = 1,
         .scl_pin                = AT91_PIN_PB11,
         .scl_is_open_drain      = 1,
-        .udelay                 = 2,            /* ~100 kHz */
+        .udelay                 = 5,            /* ~100 kHz */
 };
 
 static struct platform_device at91sam9g45_twi1_device = {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 3d996b659ff4..9be261beae7d 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -769,8 +769,7 @@ static struct map_desc dm355_io_desc[] = {
                 .virtual        = SRAM_VIRT,
                 .pfn            = __phys_to_pfn(0x00010000),
                 .length         = SZ_32K,
-                /* MT_MEMORY_NONCACHED requires supersection alignment */
-                .type           = MT_DEVICE,
+                .type           = MT_MEMORY_NONCACHED,
         },
 };
 
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 6b6f4c643709..7781e35daec3 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -969,8 +969,7 @@ static struct map_desc dm365_io_desc[] = {
                 .virtual        = SRAM_VIRT,
                 .pfn            = __phys_to_pfn(0x00010000),
                 .length         = SZ_32K,
-                /* MT_MEMORY_NONCACHED requires supersection alignment */
-                .type           = MT_DEVICE,
+                .type           = MT_MEMORY_NONCACHED,
         },
 };
 
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 40fec315c99a..5e5b0a7831fb 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -653,8 +653,7 @@ static struct map_desc dm644x_io_desc[] = {
                 .virtual        = SRAM_VIRT,
                 .pfn            = __phys_to_pfn(0x00008000),
                 .length         = SZ_16K,
-                /* MT_MEMORY_NONCACHED requires supersection alignment */
-                .type           = MT_DEVICE,
+                .type           = MT_MEMORY_NONCACHED,
         },
 };
 
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index e4a3df1872ac..26e8a9c7f50b 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -737,8 +737,7 @@ static struct map_desc dm646x_io_desc[] = {
                 .virtual        = SRAM_VIRT,
                 .pfn            = __phys_to_pfn(0x00010000),
                 .length         = SZ_32K,
-                /* MT_MEMORY_NONCACHED requires supersection alignment */
-                .type           = MT_DEVICE,
+                .type           = MT_MEMORY_NONCACHED,
         },
 };
 
diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
index 3b3e4721ce2e..eb4936ff90ad 100644
--- a/arch/arm/mach-dove/include/mach/io.h
+++ b/arch/arm/mach-dove/include/mach/io.h
@@ -13,8 +13,8 @@
 
 #define IO_SPACE_LIMIT          0xffffffff
 
-#define __io(a)  ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
-                                   DOVE_PCIE0_IO_VIRT_BASE))
-#define __mem_pci(a)            (a)
+#define __io(a)         ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
+                                                 DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a)    (a)
 
 #endif
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 61cd4d64b985..24498a932ba6 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -503,6 +503,14 @@ struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
         return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
 }
 
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+        if (mask >= SZ_64M - 1)
+                return 0;
+
+        return -EIO;
+}
+
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
index f91ca6d4fbe8..8138371c406e 100644
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -26,6 +26,8 @@
 #define PCIBIOS_MAX_MEM         0x4BFFFFFF
 #endif
 
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
+
 #define pcibios_assign_all_busses()     1
 
 /* Register locations and bits */
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 93fc2ec95e76..6e924b398919 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -38,7 +38,7 @@
 
 #define KIRKWOOD_PCIE1_IO_PHYS_BASE     0xf3000000
 #define KIRKWOOD_PCIE1_IO_VIRT_BASE     0xfef00000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE      0x00000000
+#define KIRKWOOD_PCIE1_IO_BUS_BASE      0x00100000
 #define KIRKWOOD_PCIE1_IO_SIZE          SZ_1M
 
 #define KIRKWOOD_PCIE_IO_PHYS_BASE      0xf2000000
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 55e7f00836b7..513ad3102d7c 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -117,7 +117,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp)
          * IORESOURCE_IO
          */
         pp->res[0].name = "PCIe 0 I/O Space";
-        pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+        pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
         pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
         pp->res[0].flags = IORESOURCE_IO;
 
@@ -139,7 +139,7 @@ static void __init pcie1_ioresources_init(struct pcie_port *pp)
          * IORESOURCE_IO
          */
         pp->res[0].name = "PCIe 1 I/O Space";
-        pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE;
+        pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
         pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
         pp->res[0].flags = IORESOURCE_IO;
 
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
index 4f5b0e0ce6cf..1a8a25edb1b4 100644
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -9,6 +9,8 @@
 #ifndef __ASM_MACH_SYSTEM_H
 #define __ASM_MACH_SYSTEM_H
 
+#include <mach/cputype.h>
+
 static inline void arch_idle(void)
 {
         cpu_do_idle();
@@ -16,6 +18,9 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-        cpu_reset(0);
+        if (cpu_is_pxa168())
+                cpu_reset(0xffff0000);
+        else
+                cpu_reset(0);
 }
 #endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 50d5939a78f1..58093d9e07be 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -312,8 +312,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
         freqs.cpu = policy->cpu;
 
         if (freq_debug)
-                pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
-                         "(SDRAM %d Mhz)\n",
+                pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
                          freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
                          (new_freq_mem / 2000) : (new_freq_mem / 1000));
 
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 7f64d24cd564..814f1458a06a 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -264,23 +264,35 @@
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
  * == 0x3 for pxa300/pxa310/pxa320
  */
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
 #define __cpu_is_pxa2xx(id)                             \
         ({                                              \
                 unsigned int _id = (id) >> 13 & 0x7;    \
                 _id <= 0x2;                             \
          })
+#else
+#define __cpu_is_pxa2xx(id)     (0)
+#endif
 
+#ifdef CONFIG_PXA3xx
 #define __cpu_is_pxa3xx(id)                             \
         ({                                              \
                 unsigned int _id = (id) >> 13 & 0x7;    \
                 _id == 0x3;                             \
          })
+#else
+#define __cpu_is_pxa3xx(id)     (0)
+#endif
 
+#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
 #define __cpu_is_pxa93x(id)                             \
         ({                                              \
                 unsigned int _id = (id) >> 4 & 0xfff;   \
                 _id == 0x683 || _id == 0x693;           \
          })
+#else
+#define __cpu_is_pxa93x(id)     (0)
+#endif
 
 #define cpu_is_pxa2xx()                                 \
         ({                                              \
@@ -309,7 +321,7 @@ extern unsigned long get_clock_tick_rate(void);
 #define PCIBIOS_MIN_IO          0
 #define PCIBIOS_MIN_MEM         0
 #define pcibios_assign_all_busses()     1
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
 #endif
 
-
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
index 262691fb97d8..fdca3be47d9b 100644
--- a/arch/arm/mach-pxa/include/mach/io.h
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -6,6 +6,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <mach/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 77ad6d34ab5b..405b92a29793 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -469,9 +469,13 @@ static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
         },
 };
 
+static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
+        .use_pio        = 1,
+};
+
 void __init palm27x_pmic_init(void)
 {
         i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
-        pxa27x_set_i2c_power_info(NULL);
+        pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
 }
 #endif
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index c9b747cedea8..37d6173bbb66 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -240,6 +240,7 @@ static void __init vpac270_onenand_init(void) {}
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static struct pxamci_platform_data vpac270_mci_platform_data = {
         .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
+        .gpio_power             = -1,
         .gpio_card_detect       = GPIO53_VPAC270_SD_DETECT_N,
         .gpio_card_ro           = GPIO52_VPAC270_SD_READONLY,
         .detect_delay_ms        = 200,
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index 7b1fc984abb6..d5a71abcbaea 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -273,6 +273,9 @@ extern void gpio_pullup(unsigned gpio, int value);
 extern int gpio_get_value(unsigned gpio);
 extern void gpio_set_value(unsigned gpio, int value);
 
+#define gpio_get_value_cansleep gpio_get_value
+#define gpio_set_value_cansleep gpio_set_value
+
 /* wrappers to sleep-enable the previous two functions */
 static inline unsigned gpio_to_irq(unsigned gpio)
 {
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 577df6cccb08..efb127022d42 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -227,7 +227,13 @@ static void ct_ca9x4_init(void)
         int i;
 
 #ifdef CONFIG_CACHE_L2X0
-        l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
+        void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC);
+
+        /* set RAM latencies to 1 cycle for this core tile. */
+        writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+        writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+        l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
 #endif
 
         clkdev_add_table(lookups, ARRAY_SIZE(lookups));
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index d073b64ae87e..724ba3bce72c 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -885,8 +885,23 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
         if (ai_usermode & UM_SIGNAL)
                 force_sig(SIGBUS, current);
-        else
-                set_cr(cr_no_alignment);
+        else {
+                /*
+                 * We're about to disable the alignment trap and return to
+                 * user space.  But if an interrupt occurs before actually
+                 * reaching user space, then the IRQ vector entry code will
+                 * notice that we were still in kernel space and therefore
+                 * the alignment trap won't be re-enabled in that case as it
+                 * is presumed to be always on from kernel space.
+                 * Let's prevent that race by disabling interrupts here (they
+                 * are disabled on the way back to user space anyway in
+                 * entry-common.S) and disable the alignment trap only if
+                 * there is no work pending for this thread.
+                 */
+                raw_local_irq_disable();
+                if (!(current_thread_info()->flags & _TIF_WORK_MASK))
+                        set_cr(cr_no_alignment);
+        }
 
         return 0;
 }
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 6e1c4f6a2b3f..6a3a2d0cd6db 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -15,6 +15,7 @@
 #include <linux/nodemask.h>
 #include <linux/memblock.h>
 #include <linux/sort.h>
+#include <linux/fs.h>
 
 #include <asm/cputype.h>
 #include <asm/sections.h>
@@ -246,6 +247,9 @@ static struct mem_type mem_types[] = {
                 .domain    = DOMAIN_USER,
         },
         [MT_MEMORY] = {
+                .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+                                L_PTE_USER | L_PTE_EXEC,
+                .prot_l1   = PMD_TYPE_TABLE,
                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
                 .domain    = DOMAIN_KERNEL,
         },
@@ -254,6 +258,9 @@ static struct mem_type mem_types[] = {
                 .domain    = DOMAIN_KERNEL,
         },
         [MT_MEMORY_NONCACHED] = {
+                .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+                                L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
+                .prot_l1   = PMD_TYPE_TABLE,
                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
                 .domain    = DOMAIN_KERNEL,
         },
@@ -411,9 +418,12 @@ static void __init build_mem_type_table(void)
          * Enable CPU-specific coherency if supported.
          * (Only available on XSC3 at the moment.)
          */
-        if (arch_is_coherent() && cpu_is_xsc3())
+        if (arch_is_coherent() && cpu_is_xsc3()) {
                 mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-
+                mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
+                mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+                mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
+        }
         /*
          * ARMv6 and above have extended page tables.
          */
@@ -438,7 +448,9 @@ static void __init build_mem_type_table(void)
                 mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
                 mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
                 mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+                mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
                 mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+                mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
 #endif
         }
 
@@ -475,6 +487,8 @@ static void __init build_mem_type_table(void)
         mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
         mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
         mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
+        mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
+        mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
         mem_types[MT_ROM].prot_sect |= cp->pmd;
 
         switch (cp->pmd) {
@@ -498,6 +512,19 @@ static void __init build_mem_type_table(void)
         }
 }
 
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+                              unsigned long size, pgprot_t vma_prot)
+{
+        if (!pfn_valid(pfn))
+                return pgprot_noncached(vma_prot);
+        else if (file->f_flags & O_SYNC)
+                return pgprot_writecombine(vma_prot);
+        return vma_prot;
+}
+EXPORT_SYMBOL(phys_mem_access_prot);
+#endif
+
 #define vectors_base()  (vectors_high() ? 0xffff0000 : 0)
 
 static void __init *early_alloc(unsigned long sz)
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 6a8506d99ee9..7563ff0141bd 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -186,13 +186,14 @@ cpu_v7_name:
  *      It is assumed that:
  *      - cache type register is implemented
  */
-__v7_setup:
+__v7_ca9mp_setup:
 #ifdef CONFIG_SMP
         mrc     p15, 0, r0, c1, c0, 1
         tst     r0, #(1 << 6)                   @ SMP/nAMP mode enabled?
         orreq   r0, r0, #(1 << 6) | (1 << 0)    @ Enable SMP/nAMP mode and
         mcreq   p15, 0, r0, c1, c0, 1           @ TLB ops broadcasting
 #endif
+__v7_setup:
         adr     r12, __v7_setup_stack           @ the local stack
         stmia   r12, {r0-r5, r7, r9, r11, lr}
         bl      v7_flush_dcache_all
@@ -201,11 +202,16 @@ __v7_setup:
         mrc     p15, 0, r0, c0, c0, 0           @ read main ID register
         and     r10, r0, #0xff000000            @ ARM?
         teq     r10, #0x41000000
-        bne     2f
+        bne     3f
         and     r5, r0, #0x00f00000             @ variant
         and     r6, r0, #0x0000000f             @ revision
-        orr     r0, r6, r5, lsr #20-4           @ combine variant and revision
+        orr     r6, r6, r5, lsr #20-4           @ combine variant and revision
+        ubfx    r0, r0, #4, #12                 @ primary part number
 
+        /* Cortex-A8 Errata */
+        ldr     r10, =0x00000c08                @ Cortex-A8 primary part number
+        teq     r0, r10
+        bne     2f
 #ifdef CONFIG_ARM_ERRATA_430973
         teq     r5, #0x00100000                 @ only present in r1p*
         mrceq   p15, 0, r10, c1, c0, 1          @ read aux control register
@@ -213,21 +219,42 @@ __v7_setup:
         mcreq   p15, 0, r10, c1, c0, 1          @ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_458693
-        teq     r0, #0x20                       @ only present in r2p0
+        teq     r6, #0x20                       @ only present in r2p0
         mrceq   p15, 0, r10, c1, c0, 1          @ read aux control register
         orreq   r10, r10, #(1 << 5)             @ set L1NEON to 1
         orreq   r10, r10, #(1 << 9)             @ set PLDNOP to 1
         mcreq   p15, 0, r10, c1, c0, 1          @ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_460075
-        teq     r0, #0x20                       @ only present in r2p0
+        teq     r6, #0x20                       @ only present in r2p0
         mrceq   p15, 1, r10, c9, c0, 2          @ read L2 cache aux ctrl register
         tsteq   r10, #1 << 22
         orreq   r10, r10, #(1 << 22)            @ set the Write Allocate disable bit
         mcreq   p15, 1, r10, c9, c0, 2          @ write the L2 cache aux ctrl register
 #endif
+        b       3f
+
+        /* Cortex-A9 Errata */
+2:      ldr     r10, =0x00000c09                @ Cortex-A9 primary part number
+        teq     r0, r10
+        bne     3f
+#ifdef CONFIG_ARM_ERRATA_742230
+        cmp     r6, #0x22                       @ only present up to r2p2
+        mrcle   p15, 0, r10, c15, c0, 1         @ read diagnostic register
+        orrle   r10, r10, #1 << 4               @ set bit #4
+        mcrle   p15, 0, r10, c15, c0, 1         @ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_742231
+        teq     r6, #0x20                       @ present in r2p0
+        teqne   r6, #0x21                       @ present in r2p1
+        teqne   r6, #0x22                       @ present in r2p2
+        mrceq   p15, 0, r10, c15, c0, 1         @ read diagnostic register
+        orreq   r10, r10, #1 << 12              @ set bit #12
+        orreq   r10, r10, #1 << 22              @ set bit #22
+        mcreq   p15, 0, r10, c15, c0, 1         @ write diagnostic register
+#endif
 
-2:      mov     r10, #0
+3:      mov     r10, #0
 #ifdef HARVARD_CACHE
         mcr     p15, 0, r10, c7, c5, 0          @ I+BTB cache invalidate
 #endif
@@ -323,6 +350,29 @@ cpu_elf_name:
 
         .section ".proc.info.init", #alloc, #execinstr
 
+        .type   __v7_ca9mp_proc_info, #object
+__v7_ca9mp_proc_info:
+        .long   0x410fc090              @ Required ID value
+        .long   0xff0ffff0              @ Mask for ID
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ | \
+                PMD_FLAGS
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_XN | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
+        b       __v7_ca9mp_setup
+        .long   cpu_arch_name
+        .long   cpu_elf_name
+        .long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+        .long   cpu_v7_name
+        .long   v7_processor_functions
+        .long   v7wbi_tlb_fns
+        .long   v6_user_fns
+        .long   v7_cache_fns
+        .size   __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+
         /*
          * Match any ARMv7 processor core.
          */
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index ea3ca86c5283..aedf9c1d645e 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-nomadik/timer.c
+ *  linux/arch/arm/plat-nomadik/timer.c
  *
  * Copyright (C) 2008 STMicroelectronics
  * Copyright (C) 2010 Alessandro Rubini
@@ -75,7 +75,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
                 cr = readl(mtu_base + MTU_CR(1));
                 writel(0, mtu_base + MTU_LR(1));
                 writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
-                writel(0x2, mtu_base + MTU_IMSC);
+                writel(1 << 1, mtu_base + MTU_IMSC);
                 break;
         case CLOCK_EVT_MODE_SHUTDOWN:
         case CLOCK_EVT_MODE_UNUSED:
@@ -131,25 +131,23 @@ void __init nmdk_timer_init(void)
 {
         unsigned long rate;
         struct clk *clk0;
-        struct clk *clk1;
-        u32 cr;
+        u32 cr = MTU_CRn_32BITS;
 
         clk0 = clk_get_sys("mtu0", NULL);
         BUG_ON(IS_ERR(clk0));
 
-        clk1 = clk_get_sys("mtu1", NULL);
-        BUG_ON(IS_ERR(clk1));
-
         clk_enable(clk0);
-        clk_enable(clk1);
 
         /*
-         * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
-         * use a divide-by-16 counter if it's more than 16MHz
+         * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
+         * for ux500.
+         * Use a divide-by-16 counter if the tick rate is more than 32MHz.
+         * At 32 MHz, the timer (with 32 bit counter) can be programmed
+         * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
+         * with 16 gives too low timer resolution.
          */
-        cr = MTU_CRn_32BITS;;
         rate = clk_get_rate(clk0);
-        if (rate > 16 << 20) {
+        if (rate > 32000000) {
                 rate /= 16;
                 cr |= MTU_CRn_PRESCALE_16;
         } else {
@@ -170,15 +168,8 @@ void __init nmdk_timer_init(void)
                 pr_err("timer: failed to initialize clock source %s\n",
                        nmdk_clksrc.name);
 
-        /* Timer 1 is used for events, fix according to rate */
-        cr = MTU_CRn_32BITS;
-        rate = clk_get_rate(clk1);
-        if (rate > 16 << 20) {
-                rate /= 16;
-                cr |= MTU_CRn_PRESCALE_16;
-        } else {
-                cr |= MTU_CRn_PRESCALE_1;
-        }
+        /* Timer 1 is used for events */
+
         clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
 
         writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 226b2e858d6c..10b3b4c63372 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -220,20 +220,7 @@ void __init omap_map_sram(void)
         if (omap_sram_size == 0)
                 return;
 
-        if (cpu_is_omap24xx()) {
-                omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
-
-                base = OMAP2_SRAM_PA;
-                base = ROUND_DOWN(base, PAGE_SIZE);
-                omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-        }
-
         if (cpu_is_omap34xx()) {
-                omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA;
-                base = OMAP3_SRAM_PA;
-                base = ROUND_DOWN(base, PAGE_SIZE);
-                omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-
                 /*
                  * SRAM must be marked as non-cached on OMAP3 since the
                  * CORE DPLL M2 divider change code (in SRAM) runs with the
@@ -244,13 +231,11 @@ void __init omap_map_sram(void)
                 omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
         }
 
-        if (cpu_is_omap44xx()) {
-                omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
-                base = OMAP4_SRAM_PA;
-                base = ROUND_DOWN(base, PAGE_SIZE);
-                omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-        }
-        omap_sram_io_desc[0].length = 1024 * 1024;      /* Use section desc */
+        omap_sram_io_desc[0].virtual = omap_sram_base;
+        base = omap_sram_start;
+        base = ROUND_DOWN(base, PAGE_SIZE);
+        omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+        omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
         iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
         printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",