ARM: OMAP: Fix gpio by switching to generic gpio calls, v2

Fix compile by removing remaining omap specific gpio
calls. Based on earlier patches by Jarkko Nikula.

Also remove old GPIO key code, there is already a patch
to do this with gpio_keys.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

4 files changed, 10 insertions, 72 deletions

diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 8171fe0ca082..09a242261a3d 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -423,9 +423,9 @@ static void __init omap_sx1_init(void)
 
         /* turn on USB power */
         /* sx1_setusbpower(1); cant do it here because i2c is not ready */
-        omap_request_gpio(1);   /* A_IRDA_OFF */
-        omap_request_gpio(11);  /* A_SWITCH */
-        omap_request_gpio(15);  /* A_USB_ON */
+        gpio_request(1, "A_IRDA_OFF");
+        gpio_request(11, "A_SWITCH");
+        gpio_request(15, "A_USB_ON");
         gpio_direction_output(1, 1);    /*A_IRDA_OFF = 1 */
         gpio_direction_output(11, 0);   /*A_SWITCH = 0 */
         gpio_direction_output(15, 0);   /*A_USB_ON = 0 */
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index bf1e5d32c2a3..0a7b24ba1652 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -22,8 +22,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/onenand.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/err.h>
@@ -282,65 +280,16 @@ static void __init apollon_led_init(void)
 {
         /* LED0 - AA10 */
         omap_cfg_reg(AA10_242X_GPIO13);
-        omap_request_gpio(LED0_GPIO13);
-        omap_set_gpio_direction(LED0_GPIO13, 0);
-        omap_set_gpio_dataout(LED0_GPIO13, 0);
+        gpio_request(LED0_GPIO13, "LED0");
+        gpio_direction_output(LED0_GPIO13, 0);
         /* LED1  - AA6 */
         omap_cfg_reg(AA6_242X_GPIO14);
-        omap_request_gpio(LED1_GPIO14);
-        omap_set_gpio_direction(LED1_GPIO14, 0);
-        omap_set_gpio_dataout(LED1_GPIO14, 0);
+        gpio_request(LED1_GPIO14, "LED1");
+        gpio_direction_output(LED1_GPIO14, 0);
         /* LED2  - AA4 */
         omap_cfg_reg(AA4_242X_GPIO15);
-        omap_request_gpio(LED2_GPIO15);
-        omap_set_gpio_direction(LED2_GPIO15, 0);
-        omap_set_gpio_dataout(LED2_GPIO15, 0);
-}
-
-static irqreturn_t apollon_sw_interrupt(int irq, void *ignored)
-{
-        static unsigned int led0, led1, led2;
-
-        if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
-                omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
-        else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
-                omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
-        else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
-                omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);
-
-        return IRQ_HANDLED;
-}
-
-static void __init apollon_sw_init(void)
-{
-        /* Enter SW - Y11 */
-        omap_cfg_reg(Y11_242X_GPIO16);
-        omap_request_gpio(SW_ENTER_GPIO16);
-        gpio_direction_input(SW_ENTER_GPIO16);
-        /* Up SW - AA12 */
-        omap_cfg_reg(AA12_242X_GPIO17);
-        omap_request_gpio(SW_UP_GPIO17);
-        gpio_direction_input(SW_UP_GPIO17);
-        /* Down SW - AA8 */
-        omap_cfg_reg(AA8_242X_GPIO58);
-        omap_request_gpio(SW_DOWN_GPIO58);
-        gpio_direction_input(SW_DOWN_GPIO58);
-
-        set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
-        if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
-                                IRQF_SHARED, "enter sw",
-                                &apollon_sw_interrupt))
-                return;
-        set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
-        if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
-                                IRQF_SHARED, "up sw",
-                                &apollon_sw_interrupt))
-                return;
-        set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
-        if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
-                                IRQF_SHARED, "down sw",
-                                &apollon_sw_interrupt))
-                return;
+        gpio_request(LED2_GPIO15, "LED2");
+        gpio_direction_output(LED2_GPIO15, 0);
 }
 
 static void __init apollon_usb_init(void)
@@ -357,7 +306,6 @@ static void __init omap_apollon_init(void)
         u32 v;
 
         apollon_led_init();
-        apollon_sw_init();
         apollon_flash_init();
         apollon_usb_init();
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index aa6972781e4a..f6a13451d1fd 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -88,7 +88,7 @@ static inline void __init ldp_init_smc911x(void)
 
         ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
 
-        if (omap_request_gpio(eth_gpio) < 0) {
+        if (gpio_request(eth_gpio, "smc911x irq") < 0) {
                 printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
                                 eth_gpio);
                 return;
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 04e68e88f134..8d9dfe314387 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -87,16 +87,6 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable);
 #include <linux/errno.h>
 #include <asm-generic/gpio.h>
 
-static inline int omap_request_gpio(int gpio)
-{
-        return gpio_request(gpio, "FIXME");
-}
-
-static inline void omap_free_gpio(int gpio)
-{
-        gpio_free(gpio);
-}
-
 static inline int gpio_get_value(unsigned gpio)
 {
         return __gpio_get_value(gpio);