Merge branch 'for-2.6.36' into for-2.6.37

Fairly simple conflicts, the most serious ones are the i.MX ones which I
suspect now need another rename.

Conflicts:
	arch/arm/mach-mx2/clock_imx27.c
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-omap2/board-rx51-peripherals.c
	arch/arm/mach-omap2/board-zoom2.c
	sound/soc/fsl/mpc5200_dma.c
	sound/soc/fsl/mpc5200_dma.h
	sound/soc/fsl/mpc8610_hpcd.c
	sound/soc/pxa/spitz.c

28 files changed, 684 insertions, 144 deletions

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 2753fb3e4f73..7c0bde781167 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -6,7 +6,7 @@
 
 config PLAT_SAMSUNG
         bool
-        depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
+        depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
         select NO_IOPORT
         default y
         help
@@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2
         help
           Compile in platform device definitions for HSMMC channel 2
 
+config S3C_DEV_HSMMC3
+        bool
+        help
+          Compile in platform device definitions for HSMMC channel 3
+
 config S3C_DEV_HWMON
         bool
         help
@@ -216,6 +221,11 @@ config SAMSUNG_DEV_ADC
         help
           Compile in platform device definition for ADC controller
 
+config SAMSUNG_DEV_IDE
+        bool
+        help
+          Compile in platform device definitions for IDE
+
 config S3C64XX_DEV_SPI
         bool
         help
@@ -227,6 +237,11 @@ config SAMSUNG_DEV_TS
         help
             Common in platform device definitions for touchscreen device
 
+config SAMSUNG_DEV_KEYPAD
+        bool
+        help
+          Compile in platform device definitions for keypad
+
 # DMA
 
 config S3C_DMA
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index b1d82cc5e716..4d8ff923207a 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -12,7 +12,7 @@ obj-				:=
 # Objects we always build independent of SoC choice
 
 obj-y                           += init.o
-obj-y                           += time.o
+obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
 obj-y                           += clock.o
 obj-y                           += pwm-clock.o
 obj-y                           += gpio.o
@@ -30,9 +30,12 @@ obj-$(CONFIG_S3C_ADC)	+= adc.o
 
 # devices
 
+obj-y                           += platformdata.o
+
 obj-$(CONFIG_S3C_DEV_HSMMC)     += dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)    += dev-hsmmc1.o
 obj-$(CONFIG_S3C_DEV_HSMMC2)    += dev-hsmmc2.o
+obj-$(CONFIG_S3C_DEV_HSMMC3)    += dev-hsmmc3.o
 obj-$(CONFIG_S3C_DEV_HWMON)     += dev-hwmon.o
 obj-y                           += dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)      += dev-i2c1.o
@@ -47,7 +50,9 @@ obj-$(CONFIG_S3C_DEV_ONENAND)	+= dev-onenand.o
 obj-$(CONFIG_S3C_DEV_RTC)       += dev-rtc.o
 
 obj-$(CONFIG_SAMSUNG_DEV_ADC)   += dev-adc.o
+obj-$(CONFIG_SAMSUNG_DEV_IDE)   += dev-ide.o
 obj-$(CONFIG_SAMSUNG_DEV_TS)    += dev-ts.o
+obj-$(CONFIG_SAMSUNG_DEV_KEYPAD)        += dev-keypad.o
 
 # DMA support
 
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 8bf79f3efdfb..90a20512d68d 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -391,7 +391,7 @@ void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
                 (clkp->enable)(clkp, 0);
 }
 
-/* initalise all the clocks */
+/* initialise all the clocks */
 
 int __init s3c24xx_register_baseclocks(unsigned long xtal)
 {
diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index 4c05b39810e2..b0f93f11e281 100644
--- a/arch/arm/plat-samsung/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
@@ -60,6 +60,11 @@ void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
         struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
 
         set->max_width = pd->max_width;
+        set->cd_type = pd->cd_type;
+        set->ext_cd_init = pd->ext_cd_init;
+        set->ext_cd_cleanup = pd->ext_cd_cleanup;
+        set->ext_cd_gpio = pd->ext_cd_gpio;
+        set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
 
         if (pd->cfg_gpio)
                 set->cfg_gpio = pd->cfg_gpio;
diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index e49bc4cd0ee6..1504fd802865 100644
--- a/arch/arm/plat-samsung/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
@@ -60,6 +60,11 @@ void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
         struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
 
         set->max_width = pd->max_width;
+        set->cd_type = pd->cd_type;
+        set->ext_cd_init = pd->ext_cd_init;
+        set->ext_cd_cleanup = pd->ext_cd_cleanup;
+        set->ext_cd_gpio = pd->ext_cd_gpio;
+        set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
 
         if (pd->cfg_gpio)
                 set->cfg_gpio = pd->cfg_gpio;
diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index 824580bc0e06..b28ef173444d 100644
--- a/arch/arm/plat-samsung/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
@@ -61,6 +61,11 @@ void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
         struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
 
         set->max_width = pd->max_width;
+        set->cd_type = pd->cd_type;
+        set->ext_cd_init = pd->ext_cd_init;
+        set->ext_cd_cleanup = pd->ext_cd_cleanup;
+        set->ext_cd_gpio = pd->ext_cd_gpio;
+        set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
 
         if (pd->cfg_gpio)
                 set->cfg_gpio = pd->cfg_gpio;
diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c
new file mode 100644
index 000000000000..85aaf0f2842f
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-hsmmc3.c
@@ -0,0 +1,77 @@
+/* linux/arch/arm/plat-samsung/dev-hsmmc3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Based on arch/arm/plat-samsung/dev-hsmmc1.c
+ *
+ * Samsung device definition for hsmmc device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+
+#define S3C_SZ_HSMMC    (0x1000)
+
+static struct resource s3c_hsmmc3_resource[] = {
+        [0] = {
+                .start  = S3C_PA_HSMMC3,
+                .end    = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_MMC3,
+                .end    = IRQ_MMC3,
+                .flags  = IORESOURCE_IRQ,
+        }
+};
+
+static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
+        .max_width      = 4,
+        .host_caps      = (MMC_CAP_4_BIT_DATA |
+                           MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc3 = {
+        .name           = "s3c-sdhci",
+        .id             = 3,
+        .num_resources  = ARRAY_SIZE(s3c_hsmmc3_resource),
+        .resource       = s3c_hsmmc3_resource,
+        .dev            = {
+                .dma_mask               = &s3c_device_hsmmc3_dmamask,
+                .coherent_dma_mask      = 0xffffffffUL,
+                .platform_data          = &s3c_hsmmc3_def_platdata,
+        },
+};
+
+void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+        struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
+
+        set->max_width = pd->max_width;
+        set->cd_type = pd->cd_type;
+        set->ext_cd_init = pd->ext_cd_init;
+        set->ext_cd_cleanup = pd->ext_cd_cleanup;
+        set->ext_cd_gpio = pd->ext_cd_gpio;
+        set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+        if (pd->cfg_gpio)
+                set->cfg_gpio = pd->cfg_gpio;
+        if (pd->cfg_card)
+                set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-samsung/dev-ide.c b/arch/arm/plat-samsung/dev-ide.c
new file mode 100644
index 000000000000..b497982795a7
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-ide.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-samsung/dev-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Samsung CF-ATA device definition.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/ata.h>
+#include <plat/devs.h>
+
+static struct resource s3c_cfcon_resource[] = {
+        [0] = {
+                .start  = SAMSUNG_PA_CFCON,
+                .end    = SAMSUNG_PA_CFCON + SZ_16K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_CFCON,
+                .end    = IRQ_CFCON,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device s3c_device_cfcon = {
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(s3c_cfcon_resource),
+        .resource       = s3c_cfcon_resource,
+};
+
+void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
+{
+        s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
+                         &s3c_device_cfcon);
+}
diff --git a/arch/arm/plat-samsung/dev-keypad.c b/arch/arm/plat-samsung/dev-keypad.c
new file mode 100644
index 000000000000..677c2d731b65
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-keypad.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/arm/plat-samsung/dev-keypad.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/keypad.h>
+
+static struct resource samsung_keypad_resources[] = {
+        [0] = {
+                .start  = SAMSUNG_PA_KEYPAD,
+                .end    = SAMSUNG_PA_KEYPAD + 0x20 - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_KEYPAD,
+                .end    = IRQ_KEYPAD,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device samsung_device_keypad = {
+        .name           = "samsung-keypad",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(samsung_keypad_resources),
+        .resource       = samsung_keypad_resources,
+};
+
+void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
+{
+        struct samsung_keypad_platdata *npd;
+
+        npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
+                        &samsung_device_keypad);
+
+        if (!npd->cfg_gpio)
+                npd->cfg_gpio = samsung_keypad_cfg_gpio;
+}
diff --git a/arch/arm/plat-samsung/dev-wdt.c b/arch/arm/plat-samsung/dev-wdt.c
index 5efca87cddbd..019b5b8cf14c 100644
--- a/arch/arm/plat-samsung/dev-wdt.c
+++ b/arch/arm/plat-samsung/dev-wdt.c
@@ -21,7 +21,7 @@
 static struct resource s3c_wdt_resource[] = {
         [0] = {
                 .start  = S3C_PA_WDT,
-                .end    = S3C_PA_WDT + SZ_1M - 1,
+                .end    = S3C_PA_WDT + SZ_1K,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c
index 8a8ba8bc1d96..c354089254fc 100644
--- a/arch/arm/plat-samsung/gpiolib.c
+++ b/arch/arm/plat-samsung/gpiolib.c
@@ -18,7 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <mach/gpio.h>
+#include <linux/gpio.h>
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
diff --git a/arch/arm/plat-samsung/include/plat/adc-core.h b/arch/arm/plat-samsung/include/plat/adc-core.h
new file mode 100644
index 000000000000..a281568d5856
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/adc-core.h
@@ -0,0 +1,28 @@
+/* linux/arch/arm/plat-samsung/include/plat/adc-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com/
+ *
+ * Samsung ADC Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ADC_CORE_H
+#define __ASM_PLAT_ADC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_adc_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_ADC
+        s3c_device_adc.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ADC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/ata-core.h b/arch/arm/plat-samsung/include/plat/ata-core.h
new file mode 100644
index 000000000000..f5a4ec7141b1
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/ata-core.h
@@ -0,0 +1,28 @@
+/* linux/arch/arm/plat-samsung/include/plat/ata-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Samsung CF-ATA Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_CORE_H
+#define __ASM_PLAT_ATA_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+*/
+
+/* re-define device name depending on support. */
+static inline void s3c_cfcon_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_IDE
+        s3c_device_cfcon.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ATA_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/ata.h b/arch/arm/plat-samsung/include/plat/ata.h
new file mode 100644
index 000000000000..2a3855a8372a
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/ata.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-samsung/include/plat/ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Samsung CF-ATA platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_H
+#define __ASM_PLAT_ATA_H __FILE__
+
+/**
+ * struct s3c_ide_platdata - S3C IDE driver platform data.
+ * @setup_gpio: Setup the external GPIO pins to the right state for data
+ * transfer in true-ide mode.
+ */
+struct s3c_ide_platdata {
+        void (*setup_gpio)(void);
+};
+
+/*
+ * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
+ * @pdata: Platform data for IDE driver.
+ */
+extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
+
+/* architecture-specific IDE configuration */
+extern void s3c64xx_ide_setup_gpio(void);
+extern void s5pc100_ide_setup_gpio(void);
+extern void s5pv210_ide_setup_gpio(void);
+
+#endif /*__ASM_PLAT_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 9ea6786d459d..a9fecd615de4 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -56,6 +56,8 @@ extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
 extern struct platform_device s3c_device_hsmmc2;
+extern struct platform_device s3c_device_hsmmc3;
+extern struct platform_device s3c_device_cfcon;
 
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
@@ -102,6 +104,12 @@ extern struct platform_device s5pc100_device_iis0;
 extern struct platform_device s5pc100_device_iis1;
 extern struct platform_device s5pc100_device_iis2;
 
+extern struct platform_device samsung_device_keypad;
+
+extern struct platform_device s5p_device_fimc0;
+extern struct platform_device s5p_device_fimc1;
+extern struct platform_device s5p_device_fimc2;
+
 /* s3c2440 specific devices */
 
 #ifdef CONFIG_CPU_S3C2440
@@ -110,3 +118,15 @@ extern struct platform_device s3c_device_camif;
 extern struct platform_device s3c_device_ac97;
 
 #endif
+
+/**
+ * s3c_set_platdata() - helper for setting platform data
+ * @pd: The default platform data for this device.
+ * @pdsize: The size of the platform data.
+ * @pdev: Pointer to the device to fill in.
+ *
+ * This helper replaces a number of calls that copy and then set the
+ * platform data of the device.
+ */
+extern void *s3c_set_platdata(void *pd, size_t pdsize,
+                              struct platform_device *pdev);
diff --git a/arch/arm/plat-samsung/include/plat/fb-core.h b/arch/arm/plat-samsung/include/plat/fb-core.h
new file mode 100644
index 000000000000..bca383efcf6d
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/fb-core.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/plat-samsung/include/plat/fb-core.h
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *      Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Samsung framebuffer driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PLAT_FB_CORE_H
+#define __ASM_PLAT_FB_CORE_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name depending on support. */
+static inline void s3c_fb_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_FB
+        s3c_device_fb.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_FB_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 27d3b497b55b..cb3ca3adc685 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -42,6 +42,7 @@ struct s3c_fb_pd_win {
  * @setup_gpio: Setup the external GPIO pins to the right state to transfer
  *              the data from the display system to the connected display
  *              device.
+ * @default_win: default window layer number to be used for UI layer.
  * @vidcon0: The base vidcon0 values to control the panel data format.
  * @vidcon1: The base vidcon1 values to control the panel data output.
  * @win: The setup data for each hardware window, or NULL for unused.
@@ -58,6 +59,8 @@ struct s3c_fb_platdata {
 
         struct s3c_fb_pd_win    *win[S3C_FB_MAX_WIN];
 
+        u32                      default_win;
+
         u32                      vidcon0;
         u32                      vidcon1;
 };
diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h
new file mode 100644
index 000000000000..81a3bfeeccad
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/fimc-core.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-samsung/include/plat/fimc-core.h
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *      Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Samsung camera interface driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_FIMC_CORE_H
+#define __ASM_PLAT_FIMC_CORE_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name to differentiate the subsystem in various SoCs. */
+static inline void s3c_fimc_setname(int id, char *name)
+{
+        switch (id) {
+#ifdef CONFIG_S5P_DEV_FIMC0
+        case 0:
+                s5p_device_fimc0.name = name;
+                break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC1
+        case 1:
+                s5p_device_fimc1.name = name;
+                break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC2
+        case 2:
+                s5p_device_fimc2.name = name;
+                break;
+#endif
+        }
+}
+
+#endif /* __ASM_PLAT_FIMC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/keypad-core.h b/arch/arm/plat-samsung/include/plat/keypad-core.h
new file mode 100644
index 000000000000..d513e1b3a31e
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/keypad-core.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/plat-samsung/include/plat/keypad-core.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Samsung keypad controller core function
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_KEYPAD_CORE_H
+#define __ASM_ARCH_KEYPAD_CORE_H
+
+/* These function are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void samsung_keypad_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
+        samsung_device_keypad.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_KEYPAD_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-samsung/include/plat/keypad.h
new file mode 100644
index 000000000000..b59a6483cd8a
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/keypad.h
@@ -0,0 +1,56 @@
+/*
+ * Samsung Platform - Keypad platform data definitions
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_KEYPAD_H
+#define __PLAT_SAMSUNG_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+#define SAMSUNG_MAX_ROWS        8
+#define SAMSUNG_MAX_COLS        8
+
+/**
+ * struct samsung_keypad_platdata - Platform device data for Samsung Keypad.
+ * @keymap_data: pointer to &matrix_keymap_data.
+ * @rows: number of keypad row supported.
+ * @cols: number of keypad col supported.
+ * @no_autorepeat: disable key autorepeat.
+ * @wakeup: controls whether the device should be set up as wakeup source.
+ * @cfg_gpio: configure the GPIO.
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio.
+ */
+struct samsung_keypad_platdata {
+        const struct matrix_keymap_data *keymap_data;
+        unsigned int rows;
+        unsigned int cols;
+        bool no_autorepeat;
+        bool wakeup;
+
+        void (*cfg_gpio)(unsigned int rows, unsigned int cols);
+};
+
+/**
+ * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with Samsung Keypad device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
+
+/* defined by architecture to configure gpio. */
+extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
+
+#endif /* __PLAT_SAMSUNG_KEYPAD_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-ata.h b/arch/arm/plat-samsung/include/plat/regs-ata.h
new file mode 100644
index 000000000000..f5df92fdae26
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-ata.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/plat-samsung/include/plat/regs-ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Samsung CF-ATA register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_REGS_ATA_H
+#define __ASM_PLAT_REGS_ATA_H __FILE__
+
+#define S3C_CFATA_REG(x)        (x)
+
+#define S3C_CFATA_MUX           S3C_CFATA_REG(0x0)
+
+#define S3C_ATA_CTRL            S3C_CFATA_REG(0x0)
+#define S3C_ATA_STATUS          S3C_CFATA_REG(0x4)
+#define S3C_ATA_CMD             S3C_CFATA_REG(0x8)
+#define S3C_ATA_SWRST           S3C_CFATA_REG(0xc)
+#define S3C_ATA_IRQ             S3C_CFATA_REG(0x10)
+#define S3C_ATA_IRQ_MSK         S3C_CFATA_REG(0x14)
+#define S3C_ATA_CFG             S3C_CFATA_REG(0x18)
+
+#define S3C_ATA_MDMA_TIME       S3C_CFATA_REG(0x28)
+#define S3C_ATA_PIO_TIME        S3C_CFATA_REG(0x2c)
+#define S3C_ATA_UDMA_TIME       S3C_CFATA_REG(0x30)
+#define S3C_ATA_XFR_NUM         S3C_CFATA_REG(0x34)
+#define S3C_ATA_XFR_CNT         S3C_CFATA_REG(0x38)
+#define S3C_ATA_TBUF_START      S3C_CFATA_REG(0x3c)
+#define S3C_ATA_TBUF_SIZE       S3C_CFATA_REG(0x40)
+#define S3C_ATA_SBUF_START      S3C_CFATA_REG(0x44)
+#define S3C_ATA_SBUF_SIZE       S3C_CFATA_REG(0x48)
+#define S3C_ATA_CADR_TBUF       S3C_CFATA_REG(0x4c)
+#define S3C_ATA_CADR_SBUF       S3C_CFATA_REG(0x50)
+#define S3C_ATA_PIO_DTR         S3C_CFATA_REG(0x54)
+#define S3C_ATA_PIO_FED         S3C_CFATA_REG(0x58)
+#define S3C_ATA_PIO_SCR         S3C_CFATA_REG(0x5c)
+#define S3C_ATA_PIO_LLR         S3C_CFATA_REG(0x60)
+#define S3C_ATA_PIO_LMR         S3C_CFATA_REG(0x64)
+#define S3C_ATA_PIO_LHR         S3C_CFATA_REG(0x68)
+#define S3C_ATA_PIO_DVR         S3C_CFATA_REG(0x6c)
+#define S3C_ATA_PIO_CSD         S3C_CFATA_REG(0x70)
+#define S3C_ATA_PIO_DAD         S3C_CFATA_REG(0x74)
+#define S3C_ATA_PIO_READY       S3C_CFATA_REG(0x78)
+#define S3C_ATA_PIO_RDATA       S3C_CFATA_REG(0x7c)
+
+#define S3C_CFATA_MUX_TRUEIDE   0x01
+
+#define S3C_ATA_CFG_SWAP        0x40
+#define S3C_ATA_CFG_IORDYEN     0x02
+
+#endif /* __ASM_PLAT_REGS_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-fb-v4.h b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
index 0f43599248ad..4c3647f80057 100644
--- a/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
@@ -40,16 +40,10 @@
 
 /* OSD1 and OSD4 do not have register D */
 
-#define VIDOSD_A(_win)                          (0x40 + ((_win) * 16))
-#define VIDOSD_B(_win)                          (0x44 + ((_win) * 16))
-#define VIDOSD_C(_win)                          (0x48 + ((_win) * 16))
-#define VIDOSD_D(_win)                          (0x4C + ((_win) * 16))
-
+#define VIDOSD_BASE                             (0x40)
 
 #define VIDINTCON0                              (0x130)
 
-#define WxKEYCONy(_win, _con)                   ((0x140 + ((_win) * 8)) + ((_con) * 4))
-
 /* WINCONx */
 
 #define WINCONx_CSCWIDTH_MASK                   (0x3 << 26)
@@ -143,76 +137,6 @@
 #define WPALCON_W2PAL_16BPP_A555                (1 << 6)
 
 
-/* system specific implementation code for palette sizes, and other
- * information that changes depending on which architecture is being
- * compiled.
-*/
-
-/* return true if window _win has OSD register D */
-#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
-
-static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
-{
-        if (win < 2)
-                return 256;
-        if (win < 4)
-                return 16;
-        if (win == 4)
-                return 4;
-
-        BUG();  /* shouldn't get here */
-}
-
-static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
-{
-        /* all windows can do 1/2 bpp */
-
-        if ((bpp == 25 || bpp == 19) && win == 0)
-                return 0;       /* win 0 does not have 19 or 25bpp modes */
-
-        if (bpp == 4 && win == 4)
-                return 0;
-
-        if (bpp == 8 && (win >= 3))
-                return 0;       /* win 3/4 cannot do 8bpp in any mode */
-
-        return 1;
-}
-
-static inline int s3c_fb_pal_is16(unsigned int window)
-{
-        return window > 1;
-}
-
-struct s3c_fb_palette {
-        struct fb_bitfield      r;
-        struct fb_bitfield      g;
-        struct fb_bitfield      b;
-        struct fb_bitfield      a;
-};
-
-static inline void s3c_fb_init_palette(unsigned int window,
-                                       struct s3c_fb_palette *palette)
-{
-        if (window < 2) {
-                /* Windows 0/1 are 8/8/8 or A/8/8/8 */
-                palette->r.offset = 16;
-                palette->r.length = 8;
-                palette->g.offset = 8;
-                palette->g.length = 8;
-                palette->b.offset = 0;
-                palette->b.length = 8;
-        } else {
-                /* currently we assume RGB 5/6/5 */
-                palette->r.offset = 11;
-                palette->r.length = 5;
-                palette->g.offset = 5;
-                palette->g.length = 6;
-                palette->b.offset = 0;
-                palette->b.length = 5;
-        }
-}
-
 /* Notes on per-window bpp settings
  *
  * Value        Win0     Win1     Win2     Win3     Win 4
diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h
index 0ef806e50344..8f39aa5b26ea 100644
--- a/arch/arm/plat-samsung/include/plat/regs-fb.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
@@ -112,6 +112,13 @@
 #define VIDCON2_ORGYCbCr                        (1 << 8)
 #define VIDCON2_YUVORDCrCb                      (1 << 7)
 
+/* PRTCON (S3C6410, S5PC100)
+ * Might not be present in the S3C6410 documentation,
+ * but tests prove it's there almost for sure; shouldn't hurt in any case.
+ */
+#define PRTCON                                  (0x0c)
+#define PRTCON_PROTECT                          (1 << 11)
+
 /* VIDTCON0 */
 
 #define VIDTCON0_VBPDE_MASK                     (0xff << 24)
@@ -173,6 +180,7 @@
 #define WINCONx_BITSWP                          (1 << 18)
 #define WINCONx_BYTSWP                          (1 << 17)
 #define WINCONx_HAWSWP                          (1 << 16)
+#define WINCONx_WSWP                            (1 << 15)
 #define WINCONx_BURSTLEN_MASK                   (0x3 << 9)
 #define WINCONx_BURSTLEN_SHIFT                  (9)
 #define WINCONx_BURSTLEN_16WORD                 (0x0 << 9)
@@ -212,6 +220,13 @@
 #define WINCON1_BPPMODE_25BPP_A1888             (0xd << 2)
 #define WINCON1_BPPMODE_28BPP_A4888             (0xd << 2)
 
+/* S5PV210 */
+#define SHADOWCON                               (0x34)
+#define SHADOWCON_WINx_PROTECT(_win)            (1 << (10 + (_win)))
+/* DMA channels (all windows) */
+#define SHADOWCON_CHx_ENABLE(_win)              (1 << (_win))
+/* Local input channels (windows 0-2) */
+#define SHADOWCON_CHx_LOCAL_ENABLE(_win)        (1 << (5 + (_win)))
 
 #define VIDOSDxA_TOPLEFT_X_MASK                 (0x7ff << 11)
 #define VIDOSDxA_TOPLEFT_X_SHIFT                (11)
@@ -291,11 +306,12 @@
 #define VIDINTCON0_FRAMESEL0_ACTIVE             (0x2 << 15)
 #define VIDINTCON0_FRAMESEL0_FRONTPORCH         (0x3 << 15)
 
-#define VIDINTCON0_FRAMESEL1                    (1 << 14)
-#define VIDINTCON0_FRAMESEL1_NONE               (0x0 << 14)
-#define VIDINTCON0_FRAMESEL1_BACKPORCH          (0x1 << 14)
-#define VIDINTCON0_FRAMESEL1_VSYNC              (0x2 << 14)
-#define VIDINTCON0_FRAMESEL1_FRONTPORCH         (0x3 << 14)
+#define VIDINTCON0_FRAMESEL1                    (1 << 13)
+#define VIDINTCON0_FRAMESEL1_MASK               (0x3 << 13)
+#define VIDINTCON0_FRAMESEL1_NONE               (0x0 << 13)
+#define VIDINTCON0_FRAMESEL1_BACKPORCH          (0x1 << 13)
+#define VIDINTCON0_FRAMESEL1_VSYNC              (0x2 << 13)
+#define VIDINTCON0_FRAMESEL1_FRONTPORCH         (0x3 << 13)
 
 #define VIDINTCON0_INT_FRAME                    (1 << 12)
 #define VIDINTCON0_FIFIOSEL_MASK                (0x7f << 5)
@@ -321,6 +337,10 @@
 #define VIDINTCON1_INT_FIFO                     (1 << 0)
 
 /* Window colour-key control registers */
+#define WKEYCON                                 (0x140) /* 6410,V210 */
+
+#define WKEYCON0                                (0x00)
+#define WKEYCON1                                (0x04)
 
 #define WxKEYCON0_KEYBL_EN                      (1 << 26)
 #define WxKEYCON0_KEYEN_F                       (1 << 25)
diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
index 65c190d142dd..30b7cc14cef5 100644
--- a/arch/arm/plat-samsung/include/plat/regs-rtc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h
@@ -14,6 +14,9 @@
 #define __ASM_ARCH_REGS_RTC_H __FILE__
 
 #define S3C2410_RTCREG(x) (x)
+#define S3C2410_INTP            S3C2410_RTCREG(0x30)
+#define S3C2410_INTP_ALM        (1 << 1)
+#define S3C2410_INTP_TIC        (1 << 0)
 
 #define S3C2410_RTCCON        S3C2410_RTCREG(0x40)
 #define S3C2410_RTCCON_RTCEN  (1<<0)
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index a6eba8496b24..788837e99cb3 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -259,6 +259,8 @@ struct s3c2410_uartcfg {
         unsigned short     flags;
         upf_t              uart_flags;   /* default uart flags */
 
+        unsigned int       has_fracval;
+
         unsigned long      ucon;         /* value of ucon for port */
         unsigned long      ulcon;        /* value of ulcon for port */
         unsigned long      ufcon;        /* value of ufcon for port */
diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
index 8d18d9d4d148..dc90f5ede88f 100644
--- a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
+++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
@@ -226,6 +226,7 @@
 
 #define S3C_DIEPMSK                             S3C_HSOTG_REG(0x810)
 
+#define S3C_DIEPMSK_TxFIFOEmpty                 (1 << 7)
 #define S3C_DIEPMSK_INEPNakEffMsk               (1 << 6)
 #define S3C_DIEPMSK_INTknEPMisMsk               (1 << 5)
 #define S3C_DIEPMSK_INTknTXFEmpMsk              (1 << 4)
@@ -371,6 +372,7 @@
 
 #define S3C_DIEPDMA(_a)                         S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
 #define S3C_DOEPDMA(_a)                         S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
+#define S3C_DTXFSTS(_a)                         S3C_HSOTG_REG(0x918 + ((_a) * 0x20))
 
 #define S3C_EPFIFO(_a)                          S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))
 
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 13f9fb20900a..30844c263d03 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -20,10 +20,31 @@ struct mmc_host;
 struct mmc_card;
 struct mmc_ios;
 
+enum cd_types {
+        S3C_SDHCI_CD_INTERNAL,  /* use mmc internal CD line */
+        S3C_SDHCI_CD_EXTERNAL,  /* use external callback */
+        S3C_SDHCI_CD_GPIO,      /* use external gpio pin for CD line */
+        S3C_SDHCI_CD_NONE,      /* no CD line, use polling to detect card */
+        S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
+};
+
 /**
  * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
  * @max_width: The maximum number of data bits supported.
  * @host_caps: Standard MMC host capabilities bit field.
+ * @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @ext_cd_init: Initialize external card detect subsystem. Called on
+ *               sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ *               notify_func argument is a callback to the sdhci-s3c driver
+ *               that triggers the card detection event. Callback arguments:
+ *               dev is pointer to platform device of the host controller,
+ *               state is new state of the card (0 - removed, 1 - inserted).
+ * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
+ *               sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ *               notify_func argument is the same callback as for ext_cd_init.
+ * @ext_cd_gpio: gpio pin used for external CD line, valid only if
+ *               cd_type == S3C_SDHCI_CD_GPIO
+ * @ext_cd_gpio_invert: invert values for external CD gpio line
  * @cfg_gpio: Configure the GPIO for a specific card bit-width
  * @cfg_card: Configure the interface for a specific card and speed. This
  *            is necessary the controllers and/or GPIO blocks require the
@@ -37,9 +58,17 @@ struct mmc_ios;
 struct s3c_sdhci_platdata {
         unsigned int    max_width;
         unsigned int    host_caps;
+        enum cd_types   cd_type;
 
         char            **clocks;       /* set of clock sources */
 
+        int             ext_cd_gpio;
+        bool            ext_cd_gpio_invert;
+        int     (*ext_cd_init)(void (*notify_func)(struct platform_device *,
+                                                   int state));
+        int     (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
+                                                      int state));
+
         void    (*cfg_gpio)(struct platform_device *dev, int width);
         void    (*cfg_card)(struct platform_device *dev,
                             void __iomem *regbase,
@@ -58,6 +87,7 @@ struct s3c_sdhci_platdata {
 extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
 extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
 extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd);
 
 /* Default platform data, exported so that per-cpu initialisation can
  * set the correct one when there are more than one cpu type selected.
@@ -66,6 +96,7 @@ extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
 extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
 
 /* Helper function availablity */
 
@@ -78,13 +109,13 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
 
-/* S3C6400 SDHCI setup */
+/* S3C64XX SDHCI setup */
 
 #ifdef CONFIG_S3C64XX_SETUP_SDHCI
 extern char *s3c64xx_hsmmc_clksrcs[4];
 
-#ifdef CONFIG_S3C_DEV_HSMMC
 extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
                                          void __iomem *r,
                                          struct mmc_ios *ios,
@@ -92,82 +123,70 @@ extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
 
 static inline void s3c6400_default_sdhci0(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC
         s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
         s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
         s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
 }
 
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-#endif  /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s3c6400_default_sdhci1(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC1
         s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
         s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
         s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
 
-#ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s3c6400_default_sdhci2(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC2
         s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
         s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
         s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6400_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-
-/* S3C6410 SDHCI setup */
 
 extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
                                          void __iomem *r,
                                          struct mmc_ios *ios,
                                          struct mmc_card *card);
 
-#ifdef CONFIG_S3C_DEV_HSMMC
 static inline void s3c6410_default_sdhci0(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC
         s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
         s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
         s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6410_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
 
-#ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s3c6410_default_sdhci1(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC1
         s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
         s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
         s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
 
-#ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s3c6410_default_sdhci2(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC2
         s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
         s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
         s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6410_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
 
 #else
 static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void) { }
+static inline void s3c6410_default_sdhci2(void) { }
 static inline void s3c6400_default_sdhci0(void) { }
 static inline void s3c6400_default_sdhci1(void) { }
+static inline void s3c6400_default_sdhci2(void) { }
 
 #endif /* CONFIG_S3C64XX_SETUP_SDHCI */
 
@@ -181,48 +200,42 @@ extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
                                            struct mmc_ios *ios,
                                            struct mmc_card *card);
 
-#ifdef CONFIG_S3C_DEV_HSMMC
 static inline void s5pc100_default_sdhci0(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC
         s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
         s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
         s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
 }
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
 
-#ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s5pc100_default_sdhci1(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC1
         s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
         s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
         s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
 }
-#else
-static inline void s5pc100_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
 
-#ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s5pc100_default_sdhci2(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC2
         s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
         s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
         s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
 }
-#else
-static inline void s5pc100_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
 
 #else
 static inline void s5pc100_default_sdhci0(void) { }
 static inline void s5pc100_default_sdhci1(void) { }
 static inline void s5pc100_default_sdhci2(void) { }
+
 #endif /* CONFIG_S5PC100_SETUP_SDHCI */
 
+/* S5PV210 SDHCI setup */
 
-/* S5PC110 SDHCI setup */
 #ifdef CONFIG_S5PV210_SETUP_SDHCI
 extern char *s5pv210_hsmmc_clksrcs[4];
 
@@ -231,46 +244,48 @@ extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
                                            struct mmc_ios *ios,
                                            struct mmc_card *card);
 
-#ifdef CONFIG_S3C_DEV_HSMMC
 static inline void s5pv210_default_sdhci0(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC
         s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
         s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
         s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
 
-#ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s5pv210_default_sdhci1(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC1
         s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
         s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
         s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s5pv210_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
 
-#ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s5pv210_default_sdhci2(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC2
         s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
         s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
         s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv210_default_sdhci3(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC3
+        s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+        s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
+        s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s5pv210_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
 
 #else
 static inline void s5pv210_default_sdhci0(void) { }
 static inline void s5pv210_default_sdhci1(void) { }
 static inline void s5pv210_default_sdhci2(void) { }
-#endif /* CONFIG_S5PC100_SETUP_SDHCI */
-
-
+static inline void s5pv210_default_sdhci3(void) { }
 
+#endif /* CONFIG_S5PV210_SETUP_SDHCI */
 
 #endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
new file mode 100644
index 000000000000..7cf2e1e3b20f
--- /dev/null
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-samsung/platformdata.c
+ *
+ * Copyright 2010 Ben Dooks <ben-linux <at> fluff.org>
+ *
+ * Helper for platform data setting
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+
+void __init *s3c_set_platdata(void *pd, size_t pdsize,
+                              struct platform_device *pdev)
+{
+        void *npd;
+
+        if (!pd) {
+                /* too early to use dev_name(), may not be registered */
+                printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
+                return NULL;
+        }
+
+        npd = kmemdup(pd, pdsize, GFP_KERNEL);
+        if (!npd) {
+                printk(KERN_ERR "%s: cannot clone platform data\n", pdev->name);
+                return NULL;
+        }
+
+        pdev->dev.platform_data = npd;
+        return npd;
+}