ARM: SAMSUNG: Move plat-s3c Kconfig entries to plat-samsung and plat-s3c24xx

Move the Kconfig entries from plat-s3c to plat-samsung and plat-s3c24xx
as necessary. The S3C_BOOT entries and the DMA configuration can go to
plat-samsung. The low-level UART configurations are currently S3C2XX
specific and can go to plat-s3c24xx.

Eliminating plat-s3c from the build process will be submitted seperately.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 59 insertions, 0 deletions

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 72da6461db12..93bd89385f59 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -13,6 +13,43 @@ config PLAT_SAMSUNG
 
 if PLAT_SAMSUNG
 
+# boot configurations
+
+comment "Boot options"
+
+config S3C_BOOT_WATCHDOG
+        bool "S3C Initialisation watchdog"
+        depends on S3C2410_WATCHDOG
+        help
+          Say y to enable the watchdog during the kernel decompression
+          stage. If the kernel fails to uncompress, then the watchdog
+          will trigger a reset and the system should restart.
+
+config S3C_BOOT_ERROR_RESET
+        bool "S3C Reboot on decompression error"
+        help
+          Say y here to use the watchdog to reset the system if the
+          kernel decompressor detects an error during decompression.
+
+config S3C_BOOT_UART_FORCE_FIFO
+       bool "Force UART FIFO on during boot process"
+       default y
+       help
+         Say Y here to force the UART FIFOs on during the kernel
+         uncompressor
+
+
+config S3C_LOWLEVEL_UART_PORT
+        int "S3C UART to use for low-level messages"
+        default 0
+        help
+          Choice of which UART port to use for the low-level messages,
+          such as the `Uncompressing...` at start time. The value of
+          this configuration should be between zero and two. The port
+          must have been initialised by the boot-loader before use.
+
+# clock options
+
 config SAMSUNG_CLKSRC
         bool
         help
@@ -81,6 +118,21 @@ config SAMSUNG_GPIO_EXTRA
           provides. This allows expanding the GPIO space for use with
           GPIO expanders.
 
+config S3C_GPIO_SPACE
+        int "Space between gpio banks"
+        default 0
+        help
+          Add a number of spare GPIO entries between each bank for debugging
+          purposes. This allows any problems where an counter overflows from
+          one bank to another to be caught, at the expense of using a little
+          more memory.
+
+config S3C_GPIO_TRACK
+        bool
+        help
+          Internal configuration option to enable the s3c specific gpio
+          chip tracking if the platform requires it.
+
 # ADC driver
 
 config S3C_ADC
@@ -138,6 +190,13 @@ config S3C64XX_DEV_SPI
           Compile in platform device definitions for S3C64XX's type
           SPI controllers.
 
+# DMA
+
+config S3C_DMA
+        bool
+        help
+          Internal configuration for S3C DMA core
+
 comment "Power management"
 
 config SAMSUNG_PM_DEBUG