[ARM] S3C24XX: Additional include moves

Continue moving the include files into arch/arm

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

3 files changed, 255 insertions, 0 deletions

diff --git a/arch/arm/plat-s3c/include/plat/map.h b/arch/arm/plat-s3c/include/plat/map.h
new file mode 100644
index 000000000000..b84289d32a54
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/map.h
@@ -0,0 +1,40 @@
+/* linux/include/asm-arm/plat-s3c/map.h
+ *
+ * Copyright 2003, 2007 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - Memory map definitions (virtual addresses)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_H
+#define __ASM_PLAT_MAP_H __FILE__
+
+/* Fit all our registers in at 0xF4000000 upwards, trying to use as
+ * little of the VA space as possible so vmalloc and friends have a
+ * better chance of getting memory.
+ *
+ * we try to ensure stuff like the IRQ registers are available for
+ * an single MOVS instruction (ie, only 8 bits of set data)
+ */
+
+#define S3C_ADDR_BASE   (0xF4000000)
+
+#ifndef __ASSEMBLY__
+#define S3C_ADDR(x)     ((void __iomem __force *)S3C_ADDR_BASE + (x))
+#else
+#define S3C_ADDR(x)     (S3C_ADDR_BASE + (x))
+#endif
+
+#define S3C_VA_IRQ      S3C_ADDR(0x00000000)    /* irq controller(s) */
+#define S3C_VA_SYS      S3C_ADDR(0x00100000)    /* system control */
+#define S3C_VA_MEM      S3C_ADDR(0x00200000)    /* system control */
+#define S3C_VA_TIMER    S3C_ADDR(0x00300000)    /* timer block */
+#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000)    /* watchdog */
+#define S3C_VA_UART     S3C_ADDR(0x01000000)    /* UART */
+
+#endif /* __ASM_PLAT_MAP_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-adc.h b/arch/arm/plat-s3c/include/plat/regs-adc.h
new file mode 100644
index 000000000000..4323cccc86cd
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-adc.h
@@ -0,0 +1,60 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
+ *
+ * Copyright (c) 2004 Shannon Holland <holland@loser.net>
+ *
+ * This program is free software; yosu can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 ADC registers
+*/
+
+#ifndef __ASM_ARCH_REGS_ADC_H
+#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
+
+#define S3C2410_ADCREG(x) (x)
+
+#define S3C2410_ADCCON     S3C2410_ADCREG(0x00)
+#define S3C2410_ADCTSC     S3C2410_ADCREG(0x04)
+#define S3C2410_ADCDLY     S3C2410_ADCREG(0x08)
+#define S3C2410_ADCDAT0    S3C2410_ADCREG(0x0C)
+#define S3C2410_ADCDAT1    S3C2410_ADCREG(0x10)
+
+
+/* ADCCON Register Bits */
+#define S3C2410_ADCCON_ECFLG            (1<<15)
+#define S3C2410_ADCCON_PRSCEN           (1<<14)
+#define S3C2410_ADCCON_PRSCVL(x)        (((x)&0xFF)<<6)
+#define S3C2410_ADCCON_PRSCVLMASK       (0xFF<<6)
+#define S3C2410_ADCCON_SELMUX(x)        (((x)&0x7)<<3)
+#define S3C2410_ADCCON_MUXMASK          (0x7<<3)
+#define S3C2410_ADCCON_STDBM            (1<<2)
+#define S3C2410_ADCCON_READ_START       (1<<1)
+#define S3C2410_ADCCON_ENABLE_START     (1<<0)
+#define S3C2410_ADCCON_STARTMASK        (0x3<<0)
+
+
+/* ADCTSC Register Bits */
+#define S3C2410_ADCTSC_YM_SEN           (1<<7)
+#define S3C2410_ADCTSC_YP_SEN           (1<<6)
+#define S3C2410_ADCTSC_XM_SEN           (1<<5)
+#define S3C2410_ADCTSC_XP_SEN           (1<<4)
+#define S3C2410_ADCTSC_PULL_UP_DISABLE  (1<<3)
+#define S3C2410_ADCTSC_AUTO_PST         (1<<2)
+#define S3C2410_ADCTSC_XY_PST(x)        (((x)&0x3)<<0)
+
+/* ADCDAT0 Bits */
+#define S3C2410_ADCDAT0_UPDOWN          (1<<15)
+#define S3C2410_ADCDAT0_AUTO_PST        (1<<14)
+#define S3C2410_ADCDAT0_XY_PST          (0x3<<12)
+#define S3C2410_ADCDAT0_XPDATA_MASK     (0x03FF)
+
+/* ADCDAT1 Bits */
+#define S3C2410_ADCDAT1_UPDOWN          (1<<15)
+#define S3C2410_ADCDAT1_AUTO_PST        (1<<14)
+#define S3C2410_ADCDAT1_XY_PST          (0x3<<12)
+#define S3C2410_ADCDAT1_YPDATA_MASK     (0x03FF)
+
+#endif /* __ASM_ARCH_REGS_ADC_H */
+
+
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
new file mode 100644
index 000000000000..4df006b9cc10
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
@@ -0,0 +1,155 @@
+/* linux/include/asm-arm/plat-s3c/uncompress.h
+ *
+ * Copyright 2003, 2007 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_UNCOMPRESS_H
+#define __ASM_PLAT_UNCOMPRESS_H
+
+typedef unsigned int upf_t;     /* cannot include linux/serial_core.h */
+
+/* uart setup */
+
+static unsigned int fifo_mask;
+static unsigned int fifo_max;
+
+/* forward declerations */
+
+static void arch_detect_cpu(void);
+
+/* defines for UART registers */
+
+#include <plat/regs-serial.h>
+#include <asm/plat-s3c/regs-watchdog.h>
+
+/* working in physical space... */
+#undef S3C2410_WDOGREG
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
+
+/* how many bytes we allow into the FIFO at a time in FIFO mode */
+#define FIFO_MAX         (14)
+
+#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT)
+
+static __inline__ void
+uart_wr(unsigned int reg, unsigned int val)
+{
+        volatile unsigned int *ptr;
+
+        ptr = (volatile unsigned int *)(reg + uart_base);
+        *ptr = val;
+}
+
+static __inline__ unsigned int
+uart_rd(unsigned int reg)
+{
+        volatile unsigned int *ptr;
+
+        ptr = (volatile unsigned int *)(reg + uart_base);
+        return *ptr;
+}
+
+/* we can deal with the case the UARTs are being run
+ * in FIFO mode, so that we don't hold up our execution
+ * waiting for tx to happen...
+*/
+
+static void putc(int ch)
+{
+        if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
+                int level;
+
+                while (1) {
+                        level = uart_rd(S3C2410_UFSTAT);
+                        level &= fifo_mask;
+
+                        if (level < fifo_max)
+                                break;
+                }
+
+        } else {
+                /* not using fifos */
+
+                while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
+                        barrier();
+        }
+
+        /* write byte to transmission register */
+        uart_wr(S3C2410_UTXH, ch);
+}
+
+static inline void flush(void)
+{
+}
+
+#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+
+/* CONFIG_S3C_BOOT_WATCHDOG
+ *
+ * Simple boot-time watchdog setup, to reboot the system if there is
+ * any problem with the boot process
+*/
+
+#ifdef CONFIG_S3C_BOOT_WATCHDOG
+
+#define WDOG_COUNT (0xff00)
+
+static inline void arch_decomp_wdog(void)
+{
+        __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+}
+
+static void arch_decomp_wdog_start(void)
+{
+        __raw_writel(WDOG_COUNT, S3C2410_WTDAT);
+        __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+        __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+}
+
+#else
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+#ifdef CONFIG_S3C_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+        putstr("\n\n");
+        putstr(x);
+        putstr("\n\n -- System resetting\n");
+
+        __raw_writel(0x4000, S3C2410_WTDAT);
+        __raw_writel(0x4000, S3C2410_WTCNT);
+        __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+        while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
+static void error(char *err);
+
+static void
+arch_decomp_setup(void)
+{
+        /* we may need to setup the uart(s) here if we are not running
+         * on an BAST... the BAST will have left the uarts configured
+         * after calling linux.
+         */
+
+        arch_detect_cpu();
+        arch_decomp_wdog_start();
+}
+
+
+#endif /* __ASM_PLAT_UNCOMPRESS_H */