[ARM] S3C64XX: Add UARTdevice definitions

Add resources and information for the UART deviecs
on the S3C64XX CPUs.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 34 insertions, 1 deletions

diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index 592a56354551..0f207ab2df28 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -15,12 +15,45 @@
  * the ISA space, so that the PC104 has them to itself
  * and we don't end up having to do horrible things to the
  * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
  */
 
-#define S3C_IRQ_OFFSET  (16)
+#define S3C_IRQ_OFFSET  (32)
 
 #define S3C_IRQ(x)      ((x) + S3C_IRQ_OFFSET)
 
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0       (16)
+#define IRQ_S3CUART_BASE1       (20)
+#define IRQ_S3CUART_BASE2       (24)
+#define IRQ_S3CUART_BASE3       (28)
+
+#define UART_IRQ_RXD            (0)
+#define UART_IRQ_ERR            (1)
+#define UART_IRQ_TXD            (2)
+#define UART_IRQ_MODEM          (3)
+
+#define IRQ_S3CUART_RX0         (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0         (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0        (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1         (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1         (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1        (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2         (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2         (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2        (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3         (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3         (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3        (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
 /* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
  * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
  * which we place after the pair of VICs. */