[ARM] S3C: Move time.c to arch/arm/plat-s3c

Move time.c to arch/arm/plat-s3c
to be shared with the S3C64XX implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 260 insertions, 0 deletions

diff --git a/arch/arm/plat-s3c/time.c b/arch/arm/plat-s3c/time.c
new file mode 100644
index 000000000000..c6861a05a291
--- /dev/null
+++ b/arch/arm/plat-s3c/time.c
@@ -0,0 +1,260 @@
+/* linux/arch/arm/plat-s3c24xx/time.c
+ *
+ * Copyright (C) 2003-2005 Simtec Electronics
+ *      Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+
+#include <asm/irq.h>
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <mach/regs-irq.h>
+#include <asm/mach/time.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+static unsigned long timer_startval;
+static unsigned long timer_usec_ticks;
+
+#define TIMER_USEC_SHIFT 16
+
+/* we use the shifted arithmetic to work out the ratio of timer ticks
+ * to usecs, as often the peripheral clock is not a nice even multiple
+ * of 1MHz.
+ *
+ * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
+ * for the current HZ value of 200 without producing overflows.
+ *
+ * Original patch by Dimitry Andric, updated by Ben Dooks
+*/
+
+
+/* timer_mask_usec_ticks
+ *
+ * given a clock and divisor, make the value to pass into timer_ticks_to_usec
+ * to scale the ticks into usecs
+*/
+
+static inline unsigned long
+timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
+{
+        unsigned long den = pclk / 1000;
+
+        return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
+}
+
+/* timer_ticks_to_usec
+ *
+ * convert timer ticks to usec.
+*/
+
+static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
+{
+        unsigned long res;
+
+        res = ticks * timer_usec_ticks;
+        res += 1 << (TIMER_USEC_SHIFT - 4);     /* round up slightly */
+
+        return res >> TIMER_USEC_SHIFT;
+}
+
+/***
+ * Returns microsecond  since last clock interrupt.  Note that interrupts
+ * will have been disabled by do_gettimeoffset()
+ * IRQs are disabled before entering here from do_gettimeofday()
+ */
+
+#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
+
+static unsigned long s3c2410_gettimeoffset (void)
+{
+        unsigned long tdone;
+        unsigned long irqpend;
+        unsigned long tval;
+
+        /* work out how many ticks have gone since last timer interrupt */
+
+        tval =  __raw_readl(S3C2410_TCNTO(4));
+        tdone = timer_startval - tval;
+
+        /* check to see if there is an interrupt pending */
+
+        irqpend = __raw_readl(S3C2410_SRCPND);
+        if (irqpend & SRCPND_TIMER4) {
+                /* re-read the timer, and try and fix up for the missed
+                 * interrupt. Note, the interrupt may go off before the
+                 * timer has re-loaded from wrapping.
+                 */
+
+                tval =  __raw_readl(S3C2410_TCNTO(4));
+                tdone = timer_startval - tval;
+
+                if (tval != 0)
+                        tdone += timer_startval;
+        }
+
+        return timer_ticks_to_usec(tdone);
+}
+
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t
+s3c2410_timer_interrupt(int irq, void *dev_id)
+{
+        timer_tick();
+        return IRQ_HANDLED;
+}
+
+static struct irqaction s3c2410_timer_irq = {
+        .name           = "S3C2410 Timer Tick",
+        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+        .handler        = s3c2410_timer_interrupt,
+};
+
+#define use_tclk1_12() ( \
+        machine_is_bast()       || \
+        machine_is_vr1000()     || \
+        machine_is_anubis()     || \
+        machine_is_osiris())
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ *
+ * Currently we only use timer4, as it is the only timer which has no
+ * other function that can be exploited externally
+ */
+static void s3c2410_timer_setup (void)
+{
+        unsigned long tcon;
+        unsigned long tcnt;
+        unsigned long tcfg1;
+        unsigned long tcfg0;
+
+        tcnt = 0xffff;  /* default value for tcnt */
+
+        /* read the current timer configuration bits */
+
+        tcon = __raw_readl(S3C2410_TCON);
+        tcfg1 = __raw_readl(S3C2410_TCFG1);
+        tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+        /* configure the system for whichever machine is in use */
+
+        if (use_tclk1_12()) {
+                /* timer is at 12MHz, scaler is 1 */
+                timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
+                tcnt = 12000000 / HZ;
+
+                tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
+                tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
+        } else {
+                unsigned long pclk;
+                struct clk *clk;
+
+                /* for the h1940 (and others), we use the pclk from the core
+                 * to generate the timer values. since values around 50 to
+                 * 70MHz are not values we can directly generate the timer
+                 * value from, we need to pre-scale and divide before using it.
+                 *
+                 * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
+                 * (8.45 ticks per usec)
+                 */
+
+                /* this is used as default if no other timer can be found */
+
+                clk = clk_get(NULL, "timers");
+                if (IS_ERR(clk))
+                        panic("failed to get clock for system timer");
+
+                clk_enable(clk);
+
+                pclk = clk_get_rate(clk);
+
+                /* configure clock tick */
+
+                timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
+
+                tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
+                tcfg1 |= S3C2410_TCFG1_MUX4_DIV2;
+
+                tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
+                tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT;
+
+                tcnt = (pclk / 6) / HZ;
+        }
+
+        /* timers reload after counting zero, so reduce the count by 1 */
+
+        tcnt--;
+
+        printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
+               tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
+
+        /* check to see if timer is within 16bit range... */
+        if (tcnt > 0xffff) {
+                panic("setup_timer: HZ is too small, cannot configure timer!");
+                return;
+        }
+
+        __raw_writel(tcfg1, S3C2410_TCFG1);
+        __raw_writel(tcfg0, S3C2410_TCFG0);
+
+        timer_startval = tcnt;
+        __raw_writel(tcnt, S3C2410_TCNTB(4));
+
+        /* ensure timer is stopped... */
+
+        tcon &= ~(7<<20);
+        tcon |= S3C2410_TCON_T4RELOAD;
+        tcon |= S3C2410_TCON_T4MANUALUPD;
+
+        __raw_writel(tcon, S3C2410_TCON);
+        __raw_writel(tcnt, S3C2410_TCNTB(4));
+        __raw_writel(tcnt, S3C2410_TCMPB(4));
+
+        /* start the timer running */
+        tcon |= S3C2410_TCON_T4START;
+        tcon &= ~S3C2410_TCON_T4MANUALUPD;
+        __raw_writel(tcon, S3C2410_TCON);
+}
+
+static void __init s3c2410_timer_init(void)
+{
+        s3c2410_timer_setup();
+        setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
+}
+
+struct sys_timer s3c24xx_timer = {
+        .init           = s3c2410_timer_init,
+        .offset         = s3c2410_gettimeoffset,
+        .resume         = s3c2410_timer_setup
+};