Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (77 commits)
  spi/omap: Fix DMA API usage in OMAP MCSPI driver
  spi/imx: correct the test on platform_get_irq() return value
  spi/topcliff: Typo fix threhold to threshold
  spi/dw_spi Typo change diable to disable.
  spi/fsl_espi: change the read behaviour of the SPIRF
  spi/mpc52xx-psc-spi: move probe/remove to proper sections
  spi/dw_spi: add DMA support
  spi/dw_spi: change to EXPORT_SYMBOL_GPL for exported APIs
  spi/dw_spi: Fix too short timeout in spi polling loop
  spi/pl022: convert running variable
  spi/pl022: convert busy flag to a bool
  spi/pl022: pass the returned sglen to the DMA engine
  spi/pl022: map the buffers on the DMA engine
  spi/topcliff_pch: Fix data transfer issue
  spi/imx: remove autodetection
  spi/pxa2xx: pass of_node to spi device and set a parent device
  spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes.
  spi/pxa2xx: Add chipselect support for Sodaville
  spi/pxa2xx: Consider CE4100's FIFO depth
  spi/pxa2xx: Add CE4100 support
  ...

1 files changed, 0 insertions, 186 deletions

diff --git a/arch/arm/plat-pxa/include/plat/ssp.h b/arch/arm/plat-pxa/include/plat/ssp.h
deleted file mode 100644
index fe43150690ed..000000000000
--- a/arch/arm/plat-pxa/include/plat/ssp.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *  ssp.h
- *
- *  Copyright (C) 2003 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver supports the following PXA CPU/SSP ports:-
- *
- *       PXA250     SSP
- *       PXA255     SSP, NSSP
- *       PXA26x     SSP, NSSP, ASSP
- *       PXA27x     SSP1, SSP2, SSP3
- *       PXA3xx     SSP1, SSP2, SSP3, SSP4
- */
-
-#ifndef __ASM_ARCH_SSP_H
-#define __ASM_ARCH_SSP_H
-
-#include <linux/list.h>
-#include <linux/io.h>
-
-/*
- * SSP Serial Port Registers
- * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
- * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
- */
-
-#define SSCR0           (0x00)  /* SSP Control Register 0 */
-#define SSCR1           (0x04)  /* SSP Control Register 1 */
-#define SSSR            (0x08)  /* SSP Status Register */
-#define SSITR           (0x0C)  /* SSP Interrupt Test Register */
-#define SSDR            (0x10)  /* SSP Data Write/Data Read Register */
-
-#define SSTO            (0x28)  /* SSP Time Out Register */
-#define SSPSP           (0x2C)  /* SSP Programmable Serial Protocol */
-#define SSTSA           (0x30)  /* SSP Tx Timeslot Active */
-#define SSRSA           (0x34)  /* SSP Rx Timeslot Active */
-#define SSTSS           (0x38)  /* SSP Timeslot Status */
-#define SSACD           (0x3C)  /* SSP Audio Clock Divider */
-#define SSACDD          (0x40)  /* SSP Audio Clock Dither Divider */
-
-/* Common PXA2xx bits first */
-#define SSCR0_DSS       (0x0000000f)    /* Data Size Select (mask) */
-#define SSCR0_DataSize(x)  ((x) - 1)    /* Data Size Select [4..16] */
-#define SSCR0_FRF       (0x00000030)    /* FRame Format (mask) */
-#define SSCR0_Motorola  (0x0 << 4)      /* Motorola's Serial Peripheral Interface (SPI) */
-#define SSCR0_TI        (0x1 << 4)      /* Texas Instruments' Synchronous Serial Protocol (SSP) */
-#define SSCR0_National  (0x2 << 4)      /* National Microwire */
-#define SSCR0_ECS       (1 << 6)        /* External clock select */
-#define SSCR0_SSE       (1 << 7)        /* Synchronous Serial Port Enable */
-#define SSCR0_SCR(x)    ((x) << 8)      /* Serial Clock Rate (mask) */
-
-/* PXA27x, PXA3xx */
-#define SSCR0_EDSS      (1 << 20)       /* Extended data size select */
-#define SSCR0_NCS       (1 << 21)       /* Network clock select */
-#define SSCR0_RIM       (1 << 22)       /* Receive FIFO overrrun interrupt mask */
-#define SSCR0_TUM       (1 << 23)       /* Transmit FIFO underrun interrupt mask */
-#define SSCR0_FRDC      (0x07000000)    /* Frame rate divider control (mask) */
-#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)  /* Time slots per frame [1..8] */
-#define SSCR0_FPCKE     (1 << 29)       /* FIFO packing enable */
-#define SSCR0_ACS       (1 << 30)       /* Audio clock select */
-#define SSCR0_MOD       (1 << 31)       /* Mode (normal or network) */
-
-
-#define SSCR1_RIE       (1 << 0)        /* Receive FIFO Interrupt Enable */
-#define SSCR1_TIE       (1 << 1)        /* Transmit FIFO Interrupt Enable */
-#define SSCR1_LBM       (1 << 2)        /* Loop-Back Mode */
-#define SSCR1_SPO       (1 << 3)        /* Motorola SPI SSPSCLK polarity setting */
-#define SSCR1_SPH       (1 << 4)        /* Motorola SPI SSPSCLK phase setting */
-#define SSCR1_MWDS      (1 << 5)        /* Microwire Transmit Data Size */
-#define SSCR1_TFT       (0x000003c0)    /* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
-#define SSCR1_RFT       (0x00003c00)    /* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
-
-#define SSSR_TNF        (1 << 2)        /* Transmit FIFO Not Full */
-#define SSSR_RNE        (1 << 3)        /* Receive FIFO Not Empty */
-#define SSSR_BSY        (1 << 4)        /* SSP Busy */
-#define SSSR_TFS        (1 << 5)        /* Transmit FIFO Service Request */
-#define SSSR_RFS        (1 << 6)        /* Receive FIFO Service Request */
-#define SSSR_ROR        (1 << 7)        /* Receive FIFO Overrun */
-
-
-/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
-#define SSCR0_TISSP             (1 << 4)        /* TI Sync Serial Protocol */
-#define SSCR0_PSP               (3 << 4)        /* PSP - Programmable Serial Protocol */
-#define SSCR1_TTELP             (1 << 31)       /* TXD Tristate Enable Last Phase */
-#define SSCR1_TTE               (1 << 30)       /* TXD Tristate Enable */
-#define SSCR1_EBCEI             (1 << 29)       /* Enable Bit Count Error interrupt */
-#define SSCR1_SCFR              (1 << 28)       /* Slave Clock free Running */
-#define SSCR1_ECRA              (1 << 27)       /* Enable Clock Request A */
-#define SSCR1_ECRB              (1 << 26)       /* Enable Clock request B */
-#define SSCR1_SCLKDIR           (1 << 25)       /* Serial Bit Rate Clock Direction */
-#define SSCR1_SFRMDIR           (1 << 24)       /* Frame Direction */
-#define SSCR1_RWOT              (1 << 23)       /* Receive Without Transmit */
-#define SSCR1_TRAIL             (1 << 22)       /* Trailing Byte */
-#define SSCR1_TSRE              (1 << 21)       /* Transmit Service Request Enable */
-#define SSCR1_RSRE              (1 << 20)       /* Receive Service Request Enable */
-#define SSCR1_TINTE             (1 << 19)       /* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE             (1 << 18)       /* Peripheral Trailing Byte Interupt Enable */
-#define SSCR1_IFS               (1 << 16)       /* Invert Frame Signal */
-#define SSCR1_STRF              (1 << 15)       /* Select FIFO or EFWR */
-#define SSCR1_EFWR              (1 << 14)       /* Enable FIFO Write/Read */
-
-#define SSSR_BCE                (1 << 23)       /* Bit Count Error */
-#define SSSR_CSS                (1 << 22)       /* Clock Synchronisation Status */
-#define SSSR_TUR                (1 << 21)       /* Transmit FIFO Under Run */
-#define SSSR_EOC                (1 << 20)       /* End Of Chain */
-#define SSSR_TINT               (1 << 19)       /* Receiver Time-out Interrupt */
-#define SSSR_PINT               (1 << 18)       /* Peripheral Trailing Byte Interrupt */
-
-
-#define SSPSP_SCMODE(x)         ((x) << 0)      /* Serial Bit Rate Clock Mode */
-#define SSPSP_SFRMP             (1 << 2)        /* Serial Frame Polarity */
-#define SSPSP_ETDS              (1 << 3)        /* End of Transfer data State */
-#define SSPSP_STRTDLY(x)        ((x) << 4)      /* Start Delay */
-#define SSPSP_DMYSTRT(x)        ((x) << 7)      /* Dummy Start */
-#define SSPSP_SFRMDLY(x)        ((x) << 9)      /* Serial Frame Delay */
-#define SSPSP_SFRMWDTH(x)       ((x) << 16)     /* Serial Frame Width */
-#define SSPSP_DMYSTOP(x)        ((x) << 23)     /* Dummy Stop */
-#define SSPSP_FSRT              (1 << 25)       /* Frame Sync Relative Timing */
-
-/* PXA3xx */
-#define SSPSP_EDMYSTRT(x)       ((x) << 26)     /* Extended Dummy Start */
-#define SSPSP_EDMYSTOP(x)       ((x) << 28)     /* Extended Dummy Stop */
-#define SSPSP_TIMING_MASK       (0x7f8001f0)
-
-#define SSACD_SCDB              (1 << 3)        /* SSPSYSCLK Divider Bypass */
-#define SSACD_ACPS(x)           ((x) << 4)      /* Audio clock PLL select */
-#define SSACD_ACDS(x)           ((x) << 0)      /* Audio clock divider select */
-#define SSACD_SCDX8             (1 << 7)        /* SYSCLK division ratio select */
-
-enum pxa_ssp_type {
-        SSP_UNDEFINED = 0,
-        PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
-        PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
-        PXA27x_SSP,
-        PXA168_SSP,
-};
-
-struct ssp_device {
-        struct platform_device *pdev;
-        struct list_head        node;
-
-        struct clk      *clk;
-        void __iomem    *mmio_base;
-        unsigned long   phys_base;
-
-        const char      *label;
-        int             port_id;
-        int             type;
-        int             use_count;
-        int             irq;
-        int             drcmr_rx;
-        int             drcmr_tx;
-};
-
-/**
- * pxa_ssp_write_reg - Write to a SSP register
- *
- * @dev: SSP device to access
- * @reg: Register to write to
- * @val: Value to be written.
- */
-static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
-{
-        __raw_writel(val, dev->mmio_base + reg);
-}
-
-/**
- * pxa_ssp_read_reg - Read from a SSP register
- *
- * @dev: SSP device to access
- * @reg: Register to read from
- */
-static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
-{
-        return __raw_readl(dev->mmio_base + reg);
-}
-
-struct ssp_device *pxa_ssp_request(int port, const char *label);
-void pxa_ssp_free(struct ssp_device *);
-#endif /* __ASM_ARCH_SSP_H */