Merge branch '2_6_32_for_next' of git://git.pwsan.com/linux-2.6 into for-next

10 files changed, 1903 insertions, 1 deletions

diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ab9f9efc9b62..64b3f52bd9b2 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -187,6 +187,19 @@ config OMAP_SERIAL_WAKE
           to data on the serial RX line. This allows you to wake the
           system from serial console.
 
+choice
+        prompt "OMAP PM layer selection"
+        depends on ARCH_OMAP
+        default OMAP_PM_NOOP
+
+config OMAP_PM_NONE
+        bool "No PM layer"
+
+config OMAP_PM_NOOP
+        bool "No-op/debug PM layer"
+
+endchoice
+
 endmenu
 
 endif
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 769a4c200364..98f01910c2cf 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -12,6 +12,10 @@ obj-  :=
 # OCPI interconnect support for 1710, 1610 and 5912
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
+# omap_device support (OMAP2+ only at the moment)
+obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
+
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
 obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o
@@ -26,3 +30,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
 
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
\ No newline at end of file
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index e8c327a45a55..bf880e966d3b 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -488,7 +488,7 @@ static int __init clk_debugfs_init(void)
         }
         return 0;
 err_out:
-        debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
+        debugfs_remove_recursive(clk_debugfs_root);
         return err;
 }
 late_initcall(clk_debugfs_init);
diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/mach/omap-pm.h
new file mode 100644
index 000000000000..3ee41d711492
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap-pm.h
@@ -0,0 +1,301 @@
+/*
+ * omap-pm.h - OMAP power management interface
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
+ * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
+ * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
+ * Richard Woodruff
+ */
+
+#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
+#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
+
+#include <linux/device.h>
+#include <linux/cpufreq.h>
+
+#include "powerdomain.h"
+
+/**
+ * struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU
+ * @rate: target clock rate
+ * @opp_id: OPP ID
+ * @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP
+ *
+ * Operating performance point data.  Can vary by OMAP chip and board.
+ */
+struct omap_opp {
+        unsigned long rate;
+        u8 opp_id;
+        u16 min_vdd;
+};
+
+extern struct omap_opp *mpu_opps;
+extern struct omap_opp *dsp_opps;
+extern struct omap_opp *l3_opps;
+
+/*
+ * agent_id values for use with omap_pm_set_min_bus_tput():
+ *
+ * OCP_INITIATOR_AGENT is only valid for devices that can act as
+ * initiators -- it represents the device's L3 interconnect
+ * connection.  OCP_TARGET_AGENT represents the device's L4
+ * interconnect connection.
+ */
+#define OCP_TARGET_AGENT                1
+#define OCP_INITIATOR_AGENT             2
+
+/**
+ * omap_pm_if_early_init - OMAP PM init code called before clock fw init
+ * @mpu_opp_table: array ptr to struct omap_opp for MPU
+ * @dsp_opp_table: array ptr to struct omap_opp for DSP
+ * @l3_opp_table : array ptr to struct omap_opp for CORE
+ *
+ * Initialize anything that must be configured before the clock
+ * framework starts.  The "_if_" is to avoid name collisions with the
+ * PM idle-loop code.
+ */
+int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
+                                 struct omap_opp *dsp_opp_table,
+                                 struct omap_opp *l3_opp_table);
+
+/**
+ * omap_pm_if_init - OMAP PM init code called after clock fw init
+ *
+ * The main initialization code.  OPP tables are passed in here.  The
+ * "_if_" is to avoid name collisions with the PM idle-loop code.
+ */
+int __init omap_pm_if_init(void);
+
+/**
+ * omap_pm_if_exit - OMAP PM exit code
+ *
+ * Exit code; currently unused.  The "_if_" is to avoid name
+ * collisions with the PM idle-loop code.
+ */
+void omap_pm_if_exit(void);
+
+/*
+ * Device-driver-originated constraints (via board-*.c files, platform_data)
+ */
+
+
+/**
+ * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
+ * @dev: struct device * requesting the constraint
+ * @t: maximum MPU wakeup latency in microseconds
+ *
+ * Request that the maximum interrupt latency for the MPU to be no
+ * greater than 't' microseconds. "Interrupt latency" in this case is
+ * defined as the elapsed time from the occurrence of a hardware or
+ * timer interrupt to the time when the device driver's interrupt
+ * service routine has been entered by the MPU.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the MPU powerdomain into, and
+ * possibly the CORE powerdomain as well, since interrupt handling
+ * code currently runs from SDRAM.  Advanced PM or board*.c code may
+ * also configure interrupt controller priorities, OCP bus priorities,
+ * CPU speed(s), etc.
+ *
+ * This function will not affect device wakeup latency, e.g., time
+ * elapsed from when a device driver enables a hardware device with
+ * clk_enable(), to when the device is ready for register access or
+ * other use.  To control this device wakeup latency, use
+ * set_max_dev_wakeup_lat()
+ *
+ * Multiple calls to set_max_mpu_wakeup_lat() will replace the
+ * previous t value.  To remove the latency target for the MPU, call
+ * with t = -1.
+ *
+ * No return value.
+ */
+void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
+ * @dev: struct device * requesting the constraint
+ * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
+ * @r: minimum throughput (in KiB/s)
+ *
+ * Request that the minimum data throughput on the OCP interconnect
+ * attached to device 'dev' interconnect agent 'tbus_id' be no less
+ * than 'r' KiB/s.
+ *
+ * It is expected that the OMAP PM or bus code will use this
+ * information to set the interconnect clock to run at the lowest
+ * possible speed that satisfies all current system users.  The PM or
+ * bus code will adjust the estimate based on its model of the bus, so
+ * device driver authors should attempt to specify an accurate
+ * quantity for their device use case, and let the PM or bus code
+ * overestimate the numbers as necessary to handle request/response
+ * latency, other competing users on the system, etc.  On OMAP2/3, if
+ * a driver requests a minimum L4 interconnect speed constraint, the
+ * code will also need to add an minimum L3 interconnect speed
+ * constraint,
+ *
+ * Multiple calls to set_min_bus_tput() will replace the previous rate
+ * value for this device.  To remove the interconnect throughput
+ * restriction for this device, call with r = 0.
+ *
+ * No return value.
+ */
+void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
+
+
+/**
+ * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
+ * @dev: struct device *
+ * @t: maximum device wakeup latency in microseconds
+ *
+ * Request that the maximum amount of time necessary for a device to
+ * become accessible after its clocks are enabled should be no greater
+ * than 't' microseconds.  Specifically, this represents the time from
+ * when a device driver enables device clocks with clk_enable(), to
+ * when the register reads and writes on the device will succeed.
+ * This function should be called before clk_disable() is called,
+ * since the power state transition decision may be made during
+ * clk_disable().
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the powerdomain enclosing this
+ * device into.
+ *
+ * Multiple calls to set_max_dev_wakeup_lat() will replace the
+ * previous wakeup latency values for this device.  To remove the wakeup
+ * latency restriction for this device, call with t = -1.
+ *
+ * No return value.
+ */
+void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency
+ * @dev: struct device *
+ * @t: maximum DMA transfer start latency in microseconds
+ *
+ * Request that the maximum system DMA transfer start latency for this
+ * device 'dev' should be no greater than 't' microseconds.  "DMA
+ * transfer start latency" here is defined as the elapsed time from
+ * when a device (e.g., McBSP) requests that a system DMA transfer
+ * start or continue, to the time at which data starts to flow into
+ * that device from the system DMA controller.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the CORE powerdomain into.
+ *
+ * Since system DMA transfers may not involve the MPU, this function
+ * will not affect MPU wakeup latency.  Use set_max_cpu_lat() to do
+ * so.  Similarly, this function will not affect device wakeup latency
+ * -- use set_max_dev_wakeup_lat() to affect that.
+ *
+ * Multiple calls to set_max_sdma_lat() will replace the previous t
+ * value for this device.  To remove the maximum DMA latency for this
+ * device, call with t = -1.
+ *
+ * No return value.
+ */
+void omap_pm_set_max_sdma_lat(struct device *dev, long t);
+
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+/**
+ * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table
+ *
+ * Intended for use by DSPBridge.  Returns an array of OPP->DSP clock
+ * frequency entries.  The final item in the array should have .rate =
+ * .opp_id = 0.
+ */
+const struct omap_opp *omap_pm_dsp_get_opp_table(void);
+
+/**
+ * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge
+ * @opp_id: target DSP OPP ID
+ *
+ * Set a minimum OPP ID for the DSP.  This is intended to be called
+ * only from the DSP Bridge MPU-side driver.  Unfortunately, the only
+ * information that code receives from the DSP/BIOS load estimator is the
+ * target OPP ID; hence, this interface.  No return value.
+ */
+void omap_pm_dsp_set_min_opp(u8 opp_id);
+
+/**
+ * omap_pm_dsp_get_opp - report the current DSP OPP ID
+ *
+ * Report the current OPP for the DSP.  Since on OMAP3, the DSP and
+ * MPU share a single voltage domain, the OPP ID returned back may
+ * represent a higher DSP speed than the OPP requested via
+ * omap_pm_dsp_set_min_opp().
+ *
+ * Returns the current VDD1 OPP ID, or 0 upon error.
+ */
+u8 omap_pm_dsp_get_opp(void);
+
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+/**
+ * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr
+ *
+ * Provide a frequency table usable by CPUFreq for the current chip/board.
+ * Returns a pointer to a struct cpufreq_frequency_table array or NULL
+ * upon error.
+ */
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void);
+
+/**
+ * omap_pm_cpu_set_freq - set the current minimum MPU frequency
+ * @f: MPU frequency in Hz
+ *
+ * Set the current minimum CPU frequency.  The actual CPU frequency
+ * used could end up higher if the DSP requested a higher OPP.
+ * Intended to be called by plat-omap/cpu_omap.c:omap_target().  No
+ * return value.
+ */
+void omap_pm_cpu_set_freq(unsigned long f);
+
+/**
+ * omap_pm_cpu_get_freq - report the current CPU frequency
+ *
+ * Returns the current MPU frequency, or 0 upon error.
+ */
+unsigned long omap_pm_cpu_get_freq(void);
+
+
+/*
+ * Device context loss tracking
+ */
+
+/**
+ * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
+ * @dev: struct device *
+ *
+ * This function returns the number of times that the device @dev has
+ * lost its internal context.  This generally occurs on a powerdomain
+ * transition to OFF.  Drivers use this as an optimization to avoid restoring
+ * context if the device hasn't lost it.  To use, drivers should initially
+ * call this in their context save functions and store the result.  Early in
+ * the driver's context restore function, the driver should call this function
+ * again, and compare the result to the stored counter.  If they differ, the
+ * driver must restore device context.   If the number of context losses
+ * exceeds the maximum positive integer, the function will wrap to 0 and
+ * continue counting.  Returns the number of context losses for this device,
+ * or -EINVAL upon error.
+ */
+int omap_pm_get_dev_context_loss_count(struct device *dev);
+
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/omap_device.h b/arch/arm/plat-omap/include/mach/omap_device.h
new file mode 100644
index 000000000000..bd0e136db337
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap_device.h
@@ -0,0 +1,141 @@
+/*
+ * omap_device headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Eventually this type of functionality should either be
+ * a) implemented via arch-specific pointers in platform_device
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_device
+ *
+ * omap_device differs from omap_hwmod in that it includes external
+ * (e.g., board- and system-level) integration details.  omap_hwmod
+ * stores hardware data that is invariant for a given OMAP chip.
+ *
+ * To do:
+ * - GPIO integration
+ * - regulator integration
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/omap_hwmod.h>
+
+/* omap_device._state values */
+#define OMAP_DEVICE_STATE_UNKNOWN       0
+#define OMAP_DEVICE_STATE_ENABLED       1
+#define OMAP_DEVICE_STATE_IDLE          2
+#define OMAP_DEVICE_STATE_SHUTDOWN      3
+
+/**
+ * struct omap_device - omap_device wrapper for platform_devices
+ * @pdev: platform_device
+ * @hwmods: (one .. many per omap_device)
+ * @hwmods_cnt: ARRAY_SIZE() of @hwmods
+ * @pm_lats: ptr to an omap_device_pm_latency table
+ * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
+ * @pm_lat_level: array index of the last odpl entry executed - -1 if never
+ * @dev_wakeup_lat: dev wakeup latency in microseconds
+ * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM
+ * @_state: one of OMAP_DEVICE_STATE_* (see above)
+ * @flags: device flags
+ *
+ * Integrates omap_hwmod data into Linux platform_device.
+ *
+ * Field names beginning with underscores are for the internal use of
+ * the omap_device code.
+ *
+ */
+struct omap_device {
+        struct platform_device          pdev;
+        struct omap_hwmod               **hwmods;
+        struct omap_device_pm_latency   *pm_lats;
+        u32                             dev_wakeup_lat;
+        u32                             _dev_wakeup_lat_limit;
+        u8                              pm_lats_cnt;
+        s8                              pm_lat_level;
+        u8                              hwmods_cnt;
+        u8                              _state;
+};
+
+/* Device driver interface (call via platform_data fn ptrs) */
+
+int omap_device_enable(struct platform_device *pdev);
+int omap_device_idle(struct platform_device *pdev);
+int omap_device_shutdown(struct platform_device *pdev);
+
+/* Core code interface */
+
+int omap_device_count_resources(struct omap_device *od);
+int omap_device_fill_resources(struct omap_device *od, struct resource *res);
+
+struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+                                      struct omap_hwmod *oh, void *pdata,
+                                      int pdata_len,
+                                      struct omap_device_pm_latency *pm_lats,
+                                      int pm_lats_cnt);
+
+struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+                                         struct omap_hwmod **oh, int oh_cnt,
+                                         void *pdata, int pdata_len,
+                                         struct omap_device_pm_latency *pm_lats,
+                                         int pm_lats_cnt);
+
+int omap_device_register(struct omap_device *od);
+
+/* OMAP PM interface */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+                             u32 new_wakeup_lat_limit);
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
+
+/* Other */
+
+int omap_device_idle_hwmods(struct omap_device *od);
+int omap_device_enable_hwmods(struct omap_device *od);
+
+int omap_device_disable_clocks(struct omap_device *od);
+int omap_device_enable_clocks(struct omap_device *od);
+
+
+/*
+ * Entries should be kept in latency order ascending
+ *
+ * deact_lat is the maximum number of microseconds required to complete
+ * deactivate_func() at the device's slowest OPP.
+ *
+ * act_lat is the maximum number of microseconds required to complete
+ * activate_func() at the device's slowest OPP.
+ *
+ * This will result in some suboptimal power management decisions at fast
+ * OPPs, but avoids having to recompute all device power management decisions
+ * if the system shifts from a fast OPP to a slow OPP (in order to meet
+ * latency requirements).
+ *
+ * XXX should deactivate_func/activate_func() take platform_device pointers
+ * rather than omap_device pointers?
+ */
+struct omap_device_pm_latency {
+        u32 deactivate_lat;
+        int (*deactivate_func)(struct omap_device *od);
+        u32 activate_lat;
+        int (*activate_func)(struct omap_device *od);
+};
+
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/omap_hwmod.h b/arch/arm/plat-omap/include/mach/omap_hwmod.h
new file mode 100644
index 000000000000..1f79c20e2929
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap_hwmod.h
@@ -0,0 +1,447 @@
+/*
+ * omap_hwmod macros, structures
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Created in collaboration with (alphabetical order): Benoit Cousson,
+ * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
+ * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These headers and macros are used to define OMAP on-chip module
+ * data and their integration with other OMAP modules and Linux.
+ *
+ * References:
+ * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
+ * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
+ * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
+ * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
+ * - Open Core Protocol Specification 2.2
+ *
+ * To do:
+ * - add interconnect error log structures
+ * - add pinmuxing
+ * - init_conn_id_bit (CONNID_BIT_VECTOR)
+ * - implement default hwmod SMS/SDRC flags?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+
+#include <mach/cpu.h>
+
+struct omap_device;
+
+/* OCP SYSCONFIG bit shifts/masks */
+#define SYSC_MIDLEMODE_SHIFT            12
+#define SYSC_MIDLEMODE_MASK             (0x3 << SYSC_MIDLEMODE_SHIFT)
+#define SYSC_CLOCKACTIVITY_SHIFT        8
+#define SYSC_CLOCKACTIVITY_MASK         (0x3 << SYSC_CLOCKACTIVITY_SHIFT)
+#define SYSC_SIDLEMODE_SHIFT            3
+#define SYSC_SIDLEMODE_MASK             (0x3 << SYSC_SIDLEMODE_SHIFT)
+#define SYSC_ENAWAKEUP_SHIFT            2
+#define SYSC_ENAWAKEUP_MASK             (1 << SYSC_ENAWAKEUP_SHIFT)
+#define SYSC_SOFTRESET_SHIFT            1
+#define SYSC_SOFTRESET_MASK             (1 << SYSC_SOFTRESET_SHIFT)
+
+/* OCP SYSSTATUS bit shifts/masks */
+#define SYSS_RESETDONE_SHIFT            0
+#define SYSS_RESETDONE_MASK             (1 << SYSS_RESETDONE_SHIFT)
+
+/* Master standby/slave idle mode flags */
+#define HWMOD_IDLEMODE_FORCE            (1 << 0)
+#define HWMOD_IDLEMODE_NO               (1 << 1)
+#define HWMOD_IDLEMODE_SMART            (1 << 2)
+
+
+/**
+ * struct omap_hwmod_dma_info - MPU address space handled by the hwmod
+ * @name: name of the DMA channel (module local name)
+ * @dma_ch: DMA channel ID
+ *
+ * @name should be something short, e.g., "tx" or "rx".  It is for use
+ * by platform_get_resource_byname().  It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_dma_info {
+        const char      *name;
+        u16             dma_ch;
+};
+
+/**
+ * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
+ * @role: "sys", "32k", "tv", etc -- for use in clk_get()
+ * @clkdev_dev_id: opt clock: clkdev dev_id string
+ * @clkdev_con_id: opt clock: clkdev con_id string
+ * @_clk: pointer to the struct clk (filled in at runtime)
+ *
+ * The module's interface clock and main functional clock should not
+ * be added as optional clocks.
+ */
+struct omap_hwmod_opt_clk {
+        const char      *role;
+        const char      *clkdev_dev_id;
+        const char      *clkdev_con_id;
+        struct clk      *_clk;
+};
+
+
+/* omap_hwmod_omap2_firewall.flags bits */
+#define OMAP_FIREWALL_L3                (1 << 0)
+#define OMAP_FIREWALL_L4                (1 << 1)
+
+/**
+ * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
+ * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
+ * @l4_fw_region: L4 firewall region ID
+ * @l4_prot_group: L4 protection group ID
+ * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
+ */
+struct omap_hwmod_omap2_firewall {
+        u8 l3_perm_bit;
+        u8 l4_fw_region;
+        u8 l4_prot_group;
+        u8 flags;
+};
+
+
+/*
+ * omap_hwmod_addr_space.flags bits
+ *
+ * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
+ * ADDR_TYPE_RT: Address space contains module register target data.
+ */
+#define ADDR_MAP_ON_INIT        (1 << 0)
+#define ADDR_TYPE_RT            (1 << 1)
+
+/**
+ * struct omap_hwmod_addr_space - MPU address space handled by the hwmod
+ * @pa_start: starting physical address
+ * @pa_end: ending physical address
+ * @flags: (see omap_hwmod_addr_space.flags macros above)
+ *
+ * Address space doesn't necessarily follow physical interconnect
+ * structure.  GPMC is one example.
+ */
+struct omap_hwmod_addr_space {
+        u32 pa_start;
+        u32 pa_end;
+        u8 flags;
+};
+
+
+/*
+ * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
+ * interface to interact with the hwmod.  Used to add sleep dependencies
+ * when the module is enabled or disabled.
+ */
+#define OCP_USER_MPU                    (1 << 0)
+#define OCP_USER_SDMA                   (1 << 1)
+
+/* omap_hwmod_ocp_if.flags bits */
+#define OCPIF_HAS_IDLEST                (1 << 0)
+#define OCPIF_SWSUP_IDLE                (1 << 1)
+#define OCPIF_CAN_BURST                 (1 << 2)
+
+/**
+ * struct omap_hwmod_ocp_if - OCP interface data
+ * @master: struct omap_hwmod that initiates OCP transactions on this link
+ * @slave: struct omap_hwmod that responds to OCP transactions on this link
+ * @addr: address space associated with this link
+ * @clkdev_dev_id: interface clock: clkdev dev_id string
+ * @clkdev_con_id: interface clock: clkdev con_id string
+ * @_clk: pointer to the interface struct clk (filled in at runtime)
+ * @fw: interface firewall data
+ * @addr_cnt: ARRAY_SIZE(@addr)
+ * @width: OCP data width
+ * @thread_cnt: number of threads
+ * @max_burst_len: maximum burst length in @width sized words (0 if unlimited)
+ * @user: initiators using this interface (see OCP_USER_* macros above)
+ * @flags: OCP interface flags (see OCPIF_* macros above)
+ *
+ * It may also be useful to add a tag_cnt field for OCP2.x devices.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod_ocp_if {
+        struct omap_hwmod               *master;
+        struct omap_hwmod               *slave;
+        struct omap_hwmod_addr_space    *addr;
+        const char                      *clkdev_dev_id;
+        const char                      *clkdev_con_id;
+        struct clk                      *_clk;
+        union {
+                struct omap_hwmod_omap2_firewall omap2;
+        }                               fw;
+        u8                              addr_cnt;
+        u8                              width;
+        u8                              thread_cnt;
+        u8                              max_burst_len;
+        u8                              user;
+        u8                              flags;
+};
+
+
+/* Macros for use in struct omap_hwmod_sysconfig */
+
+/* Flags for use in omap_hwmod_sysconfig.idlemodes */
+#define MASTER_STANDBY_SHIFT    2
+#define SLAVE_IDLE_SHIFT        0
+#define SIDLE_FORCE             (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
+#define SIDLE_NO                (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART             (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
+#define MSTANDBY_FORCE          (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_NO             (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_SMART          (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
+
+/* omap_hwmod_sysconfig.sysc_flags capability flags */
+#define SYSC_HAS_AUTOIDLE       (1 << 0)
+#define SYSC_HAS_SOFTRESET      (1 << 1)
+#define SYSC_HAS_ENAWAKEUP      (1 << 2)
+#define SYSC_HAS_EMUFREE        (1 << 3)
+#define SYSC_HAS_CLOCKACTIVITY  (1 << 4)
+#define SYSC_HAS_SIDLEMODE      (1 << 5)
+#define SYSC_HAS_MIDLEMODE      (1 << 6)
+#define SYSS_MISSING            (1 << 7)
+
+/* omap_hwmod_sysconfig.clockact flags */
+#define CLOCKACT_TEST_BOTH      0x0
+#define CLOCKACT_TEST_MAIN      0x1
+#define CLOCKACT_TEST_ICLK      0x2
+#define CLOCKACT_TEST_NONE      0x3
+
+/**
+ * struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data
+ * @rev_offs: IP block revision register offset (from module base addr)
+ * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
+ * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
+ * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
+ * @clockact: the default value of the module CLOCKACTIVITY bits
+ *
+ * @clockact describes to the module which clocks are likely to be
+ * disabled when the PRCM issues its idle request to the module.  Some
+ * modules have separate clockdomains for the interface clock and main
+ * functional clock, and can check whether they should acknowledge the
+ * idle request based on the internal module functionality that has
+ * been associated with the clocks marked in @clockact.  This field is
+ * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
+ *
+ */
+struct omap_hwmod_sysconfig {
+        u16 rev_offs;
+        u16 sysc_offs;
+        u16 syss_offs;
+        u8 idlemodes;
+        u8 sysc_flags;
+        u8 clockact;
+};
+
+/**
+ * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM
+ * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
+ * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
+ * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
+ * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
+ * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
+ *
+ * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
+ * WKEN, GRPSEL registers.  In an ideal world, no extra information
+ * would be needed for IDLEST information, but alas, there are some
+ * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
+ * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
+ */
+struct omap_hwmod_omap2_prcm {
+        s16 module_offs;
+        u8 prcm_reg_id;
+        u8 module_bit;
+        u8 idlest_reg_id;
+        u8 idlest_idle_bit;
+        u8 idlest_stdby_bit;
+};
+
+
+/**
+ * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
+ * @device_offs: device register offset from @module_offs
+ * @submodule_wkdep_bit: bit shift of the WKDEP range
+ */
+struct omap_hwmod_omap4_prcm {
+        u32 module_offs;
+        u16 device_offs;
+        u8 submodule_wkdep_bit;
+};
+
+
+/*
+ * omap_hwmod.flags definitions
+ *
+ * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
+ *     of idle, rather than relying on module smart-idle
+ * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
+ *     of standby, rather than relying on module smart-standby
+ * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
+ *     SDRAM controller, etc.
+ * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
+ *     controller, etc.
+ * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ */
+#define HWMOD_SWSUP_SIDLE                       (1 << 0)
+#define HWMOD_SWSUP_MSTANDBY                    (1 << 1)
+#define HWMOD_INIT_NO_RESET                     (1 << 2)
+#define HWMOD_INIT_NO_IDLE                      (1 << 3)
+#define HWMOD_SET_DEFAULT_CLOCKACT              (1 << 4)
+
+/*
+ * omap_hwmod._int_flags definitions
+ * These are for internal use only and are managed by the omap_hwmod code.
+ *
+ * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
+ * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
+ * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
+ */
+#define _HWMOD_NO_MPU_PORT                      (1 << 0)
+#define _HWMOD_WAKEUP_ENABLED                   (1 << 1)
+#define _HWMOD_SYSCONFIG_LOADED                 (1 << 2)
+
+/*
+ * omap_hwmod._state definitions
+ *
+ * INITIALIZED: reset (optionally), initialized, enabled, disabled
+ *              (optionally)
+ *
+ *
+ */
+#define _HWMOD_STATE_UNKNOWN                    0
+#define _HWMOD_STATE_REGISTERED                 1
+#define _HWMOD_STATE_CLKS_INITED                2
+#define _HWMOD_STATE_INITIALIZED                3
+#define _HWMOD_STATE_ENABLED                    4
+#define _HWMOD_STATE_IDLE                       5
+#define _HWMOD_STATE_DISABLED                   6
+
+/**
+ * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
+ * @name: name of the hwmod
+ * @od: struct omap_device currently associated with this hwmod (internal use)
+ * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
+ * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
+ * @prcm: PRCM data pertaining to this hwmod
+ * @clkdev_dev_id: main clock: clkdev dev_id string
+ * @clkdev_con_id: main clock: clkdev con_id string
+ * @_clk: pointer to the main struct clk (filled in at runtime)
+ * @opt_clks: other device clocks that drivers can request (0..*)
+ * @masters: ptr to array of OCP ifs that this hwmod can initiate on
+ * @slaves: ptr to array of OCP ifs that this hwmod can respond on
+ * @sysconfig: device SYSCONFIG/SYSSTATUS register data
+ * @dev_attr: arbitrary device attributes that can be passed to the driver
+ * @_sysc_cache: internal-use hwmod flags
+ * @_rt_va: cached register target start address (internal use)
+ * @_mpu_port_index: cached MPU register target slave ID (internal use)
+ * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
+ * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
+ * @mpu_irqs_cnt: number of @mpu_irqs
+ * @sdma_chs_cnt: number of @sdma_chs
+ * @opt_clks_cnt: number of @opt_clks
+ * @master_cnt: number of @master entries
+ * @slaves_cnt: number of @slave entries
+ * @response_lat: device OCP response latency (in interface clock cycles)
+ * @_int_flags: internal-use hwmod flags
+ * @_state: internal-use hwmod state
+ * @flags: hwmod flags (documented below)
+ * @omap_chip: OMAP chips this hwmod is present on
+ * @node: list node for hwmod list (internal use)
+ *
+ * @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main
+ * clock," which for our purposes is defined as "the functional clock needed
+ * for register accesses to complete."  Modules may not have a main clock if
+ * the interface clock also serves as a main clock.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod {
+        const char                      *name;
+        struct omap_device              *od;
+        u8                              *mpu_irqs;
+        struct omap_hwmod_dma_info      *sdma_chs;
+        union {
+                struct omap_hwmod_omap2_prcm omap2;
+                struct omap_hwmod_omap4_prcm omap4;
+        }                               prcm;
+        const char                      *clkdev_dev_id;
+        const char                      *clkdev_con_id;
+        struct clk                      *_clk;
+        struct omap_hwmod_opt_clk       *opt_clks;
+        struct omap_hwmod_ocp_if        **masters; /* connect to *_IA */
+        struct omap_hwmod_ocp_if        **slaves;  /* connect to *_TA */
+        struct omap_hwmod_sysconfig     *sysconfig;
+        void                            *dev_attr;
+        u32                             _sysc_cache;
+        void __iomem                    *_rt_va;
+        struct list_head                node;
+        u16                             flags;
+        u8                              _mpu_port_index;
+        u8                              msuspendmux_reg_id;
+        u8                              msuspendmux_shift;
+        u8                              response_lat;
+        u8                              mpu_irqs_cnt;
+        u8                              sdma_chs_cnt;
+        u8                              opt_clks_cnt;
+        u8                              masters_cnt;
+        u8                              slaves_cnt;
+        u8                              hwmods_cnt;
+        u8                              _int_flags;
+        u8                              _state;
+        const struct omap_chip_id       omap_chip;
+};
+
+int omap_hwmod_init(struct omap_hwmod **ohs);
+int omap_hwmod_register(struct omap_hwmod *oh);
+int omap_hwmod_unregister(struct omap_hwmod *oh);
+struct omap_hwmod *omap_hwmod_lookup(const char *name);
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh));
+int omap_hwmod_late_init(void);
+
+int omap_hwmod_enable(struct omap_hwmod *oh);
+int omap_hwmod_idle(struct omap_hwmod *oh);
+int omap_hwmod_shutdown(struct omap_hwmod *oh);
+
+int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
+int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
+
+int omap_hwmod_reset(struct omap_hwmod *oh);
+void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
+
+void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs);
+u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs);
+
+int omap_hwmod_count_resources(struct omap_hwmod *oh);
+int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+
+struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
+
+int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
+                                 struct omap_hwmod *init_oh);
+int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
+                                 struct omap_hwmod *init_oh);
+
+int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
+
+int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
+int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 93f70d2cbce1..1c09c78a48f2 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -21,19 +21,28 @@
 /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
 
 #define SDRC_SYSCONFIG          0x010
+#define SDRC_CS_CFG             0x040
+#define SDRC_SHARING            0x044
+#define SDRC_ERR_TYPE           0x04C
 #define SDRC_DLLA_CTRL          0x060
 #define SDRC_DLLA_STATUS        0x064
 #define SDRC_DLLB_CTRL          0x068
 #define SDRC_DLLB_STATUS        0x06C
 #define SDRC_POWER              0x070
+#define SDRC_MCFG_0             0x080
 #define SDRC_MR_0               0x084
+#define SDRC_EMR2_0             0x08c
 #define SDRC_ACTIM_CTRL_A_0     0x09c
 #define SDRC_ACTIM_CTRL_B_0     0x0a0
 #define SDRC_RFR_CTRL_0         0x0a4
+#define SDRC_MANUAL_0           0x0a8
+#define SDRC_MCFG_1             0x0B0
 #define SDRC_MR_1               0x0B4
+#define SDRC_EMR2_1             0x0BC
 #define SDRC_ACTIM_CTRL_A_1     0x0C4
 #define SDRC_ACTIM_CTRL_B_1     0x0C8
 #define SDRC_RFR_CTRL_1         0x0D4
+#define SDRC_MANUAL_1           0x0D8
 
 /*
  * These values represent the number of memory clock cycles between
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index def0529c75eb..e249186d26e2 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
+#include <linux/init.h>
+
 #if defined(CONFIG_ARCH_OMAP1)
 /* OMAP1 serial ports */
 #define OMAP_UART1_BASE         0xfffb0000
@@ -53,6 +55,7 @@
                         })
 
 #ifndef __ASSEMBLER__
+extern void __init omap_serial_early_init(void);
 extern void omap_serial_init(void);
 extern int omap_uart_can_sleep(void);
 extern void omap_uart_check_wakeup(void);
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
new file mode 100644
index 000000000000..e98f0a2a6c26
--- /dev/null
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -0,0 +1,296 @@
+/*
+ * omap-pm-noop.c - OMAP power management interface - dummy version
+ *
+ * This code implements the OMAP power management interface to
+ * drivers, CPUIdle, CPUFreq, and DSP Bridge.  It is strictly for
+ * debug/demonstration use, as it does nothing but printk() whenever a
+ * function is called (when DEBUG is defined, below)
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order):
+ * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan
+ * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+
+/* Interface documentation is in mach/omap-pm.h */
+#include <mach/omap-pm.h>
+
+#include <mach/powerdomain.h>
+
+struct omap_opp *dsp_opps;
+struct omap_opp *mpu_opps;
+struct omap_opp *l3_opps;
+
+/*
+ * Device-driver-originated constraints (via board-*.c files)
+ */
+
+void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
+{
+        if (!dev || t < -1) {
+                WARN_ON(1);
+                return;
+        };
+
+        if (t == -1)
+                pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
+                         "dev %s\n", dev_name(dev));
+        else
+                pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
+                         "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+        /*
+         * For current Linux, this needs to map the MPU to a
+         * powerdomain, then go through the list of current max lat
+         * constraints on the MPU and find the smallest.  If
+         * the latency constraint has changed, the code should
+         * recompute the state to enter for the next powerdomain
+         * state.
+         *
+         * TI CDP code can call constraint_set here.
+         */
+}
+
+void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
+{
+        if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
+            agent_id != OCP_TARGET_AGENT)) {
+                WARN_ON(1);
+                return;
+        };
+
+        if (r == 0)
+                pr_debug("OMAP PM: remove min bus tput constraint: "
+                         "dev %s for agent_id %d\n", dev_name(dev), agent_id);
+        else
+                pr_debug("OMAP PM: add min bus tput constraint: "
+                         "dev %s for agent_id %d: rate %ld KiB\n",
+                         dev_name(dev), agent_id, r);
+
+        /*
+         * This code should model the interconnect and compute the
+         * required clock frequency, convert that to a VDD2 OPP ID, then
+         * set the VDD2 OPP appropriately.
+         *
+         * TI CDP code can call constraint_set here on the VDD2 OPP.
+         */
+}
+
+void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
+{
+        if (!dev || t < -1) {
+                WARN_ON(1);
+                return;
+        };
+
+        if (t == -1)
+                pr_debug("OMAP PM: remove max device latency constraint: "
+                         "dev %s\n", dev_name(dev));
+        else
+                pr_debug("OMAP PM: add max device latency constraint: "
+                         "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+        /*
+         * For current Linux, this needs to map the device to a
+         * powerdomain, then go through the list of current max lat
+         * constraints on that powerdomain and find the smallest.  If
+         * the latency constraint has changed, the code should
+         * recompute the state to enter for the next powerdomain
+         * state.  Conceivably, this code should also determine
+         * whether to actually disable the device clocks or not,
+         * depending on how long it takes to re-enable the clocks.
+         *
+         * TI CDP code can call constraint_set here.
+         */
+}
+
+void omap_pm_set_max_sdma_lat(struct device *dev, long t)
+{
+        if (!dev || t < -1) {
+                WARN_ON(1);
+                return;
+        };
+
+        if (t == -1)
+                pr_debug("OMAP PM: remove max DMA latency constraint: "
+                         "dev %s\n", dev_name(dev));
+        else
+                pr_debug("OMAP PM: add max DMA latency constraint: "
+                         "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+        /*
+         * For current Linux PM QOS params, this code should scan the
+         * list of maximum CPU and DMA latencies and select the
+         * smallest, then set cpu_dma_latency pm_qos_param
+         * accordingly.
+         *
+         * For future Linux PM QOS params, with separate CPU and DMA
+         * latency params, this code should just set the dma_latency param.
+         *
+         * TI CDP code can call constraint_set here.
+         */
+
+}
+
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+const struct omap_opp *omap_pm_dsp_get_opp_table(void)
+{
+        pr_debug("OMAP PM: DSP request for OPP table\n");
+
+        /*
+         * Return DSP frequency table here:  The final item in the
+         * array should have .rate = .opp_id = 0.
+         */
+
+        return NULL;
+}
+
+void omap_pm_dsp_set_min_opp(u8 opp_id)
+{
+        if (opp_id == 0) {
+                WARN_ON(1);
+                return;
+        }
+
+        pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id);
+
+        /*
+         *
+         * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we
+         * can just test to see which is higher, the CPU's desired OPP
+         * ID or the DSP's desired OPP ID, and use whichever is
+         * highest.
+         *
+         * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP
+         * rate is keyed on MPU speed, not the OPP ID.  So we need to
+         * map the OPP ID to the MPU speed for use with clk_set_rate()
+         * if it is higher than the current OPP clock rate.
+         *
+         */
+}
+
+
+u8 omap_pm_dsp_get_opp(void)
+{
+        pr_debug("OMAP PM: DSP requests current DSP OPP ID\n");
+
+        /*
+         * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock
+         *
+         * CDP12.14+:
+         * Call clk_get_rate() on the OPP custom clock, map that to an
+         * OPP ID using the tables defined in board-*.c/chip-*.c files.
+         */
+
+        return 0;
+}
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void)
+{
+        pr_debug("OMAP PM: CPUFreq request for frequency table\n");
+
+        /*
+         * Return CPUFreq frequency table here: loop over
+         * all VDD1 clkrates, pull out the mpu_ck frequencies, build
+         * table
+         */
+
+        return NULL;
+}
+
+void omap_pm_cpu_set_freq(unsigned long f)
+{
+        if (f == 0) {
+                WARN_ON(1);
+                return;
+        }
+
+        pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n",
+                 f);
+
+        /*
+         * For l-o dev tree, determine whether MPU freq or DSP OPP id
+         * freq is higher.  Find the OPP ID corresponding to the
+         * higher frequency.  Call clk_round_rate() and clk_set_rate()
+         * on the OPP custom clock.
+         *
+         * CDP should just be able to set the VDD1 OPP clock rate here.
+         */
+}
+
+unsigned long omap_pm_cpu_get_freq(void)
+{
+        pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n");
+
+        /*
+         * Call clk_get_rate() on the mpu_ck.
+         */
+
+        return 0;
+}
+
+/*
+ * Device context loss tracking
+ */
+
+int omap_pm_get_dev_context_loss_count(struct device *dev)
+{
+        if (!dev) {
+                WARN_ON(1);
+                return -EINVAL;
+        };
+
+        pr_debug("OMAP PM: returning context loss count for dev %s\n",
+                 dev_name(dev));
+
+        /*
+         * Map the device to the powerdomain.  Return the powerdomain
+         * off counter.
+         */
+
+        return 0;
+}
+
+
+/* Should be called before clk framework init */
+int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
+                                 struct omap_opp *dsp_opp_table,
+                                 struct omap_opp *l3_opp_table)
+{
+        mpu_opps = mpu_opp_table;
+        dsp_opps = dsp_opp_table;
+        l3_opps = l3_opp_table;
+        return 0;
+}
+
+/* Must be called after clock framework is initialized */
+int __init omap_pm_if_init(void)
+{
+        return 0;
+}
+
+void omap_pm_if_exit(void)
+{
+        /* Deallocate CPUFreq frequency table here */
+}
+
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
new file mode 100644
index 000000000000..2c409fc6dd21
--- /dev/null
+++ b/arch/arm/plat-omap/omap_device.c
@@ -0,0 +1,687 @@
+/*
+ * omap_device implementation
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code provides a consistent interface for OMAP device drivers
+ * to control power management and interconnect properties of their
+ * devices.
+ *
+ * In the medium- to long-term, this code should either be
+ * a) implemented via arch-specific pointers in platform_data
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_data func pointers
+ *
+ *
+ * Guidelines for usage by driver authors:
+ *
+ * 1. These functions are intended to be used by device drivers via
+ * function pointers in struct platform_data.  As an example,
+ * omap_device_enable() should be passed to the driver as
+ *
+ * struct foo_driver_platform_data {
+ * ...
+ *      int (*device_enable)(struct platform_device *pdev);
+ * ...
+ * }
+ *
+ * Note that the generic "device_enable" name is used, rather than
+ * "omap_device_enable".  This is so other architectures can pass in their
+ * own enable/disable functions here.
+ *
+ * This should be populated during device setup:
+ *
+ * ...
+ * pdata->device_enable = omap_device_enable;
+ * ...
+ *
+ * 2. Drivers should first check to ensure the function pointer is not null
+ * before calling it, as in:
+ *
+ * if (pdata->device_enable)
+ *     pdata->device_enable(pdev);
+ *
+ * This allows other architectures that don't use similar device_enable()/
+ * device_shutdown() functions to execute normally.
+ *
+ * ...
+ *
+ * Suggested usage by device drivers:
+ *
+ * During device initialization:
+ * device_enable()
+ *
+ * During device idle:
+ * (save remaining device context if necessary)
+ * device_idle();
+ *
+ * During device resume:
+ * device_enable();
+ * (restore context if necessary)
+ *
+ * During device shutdown:
+ * device_shutdown()
+ * (device must be reinitialized at this point to use it again)
+ *
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/omap_device.h>
+#include <mach/omap_hwmod.h>
+
+/* These parameters are passed to _omap_device_{de,}activate() */
+#define USE_WAKEUP_LAT                  0
+#define IGNORE_WAKEUP_LAT               1
+
+/* XXX this should be moved into a separate file */
+#if defined(CONFIG_ARCH_OMAP2420)
+# define OMAP_32KSYNCT_BASE             0x48004000
+#elif defined(CONFIG_ARCH_OMAP2430)
+# define OMAP_32KSYNCT_BASE             0x49020000
+#elif defined(CONFIG_ARCH_OMAP3430)
+# define OMAP_32KSYNCT_BASE             0x48320000
+#else
+# error Unknown OMAP device
+#endif
+
+/* Private functions */
+
+/**
+ * _read_32ksynct - read the OMAP 32K sync timer
+ *
+ * Returns the current value of the 32KiHz synchronization counter.
+ * XXX this should be generalized to simply read the system clocksource.
+ * XXX this should be moved to a separate synctimer32k.c file
+ */
+static u32 _read_32ksynct(void)
+{
+        if (!cpu_class_is_omap2())
+                BUG();
+
+        return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010));
+}
+
+/**
+ * _omap_device_activate - increase device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: increase to latency target (0) or full readiness (1)?
+ *
+ * Increase readiness of omap_device @od (thus decreasing device
+ * wakeup latency, but consuming more power).  If @ignore_lat is
+ * IGNORE_WAKEUP_LAT, make the omap_device fully active.  Otherwise,
+ * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
+ * latency is greater than the requested maximum wakeup latency, step
+ * backwards in the omap_device_pm_latency table to ensure the
+ * device's maximum wakeup latency is less than or equal to the
+ * requested maximum wakeup latency.  Returns 0.
+ */
+static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
+{
+        u32 a, b;
+
+        pr_debug("omap_device: %s: activating\n", od->pdev.name);
+
+        while (od->pm_lat_level > 0) {
+                struct omap_device_pm_latency *odpl;
+                int act_lat = 0;
+
+                od->pm_lat_level--;
+
+                odpl = od->pm_lats + od->pm_lat_level;
+
+                if (!ignore_lat &&
+                    (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
+                        break;
+
+                a = _read_32ksynct();
+
+                /* XXX check return code */
+                odpl->activate_func(od);
+
+                b = _read_32ksynct();
+
+                act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+
+                pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
+                         "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat);
+
+                WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
+                     "activate step %d took longer than expected (%d > %d)\n",
+                     od->pdev.name, od->pdev.id, od->pm_lat_level,
+                     act_lat, odpl->activate_lat);
+
+                od->dev_wakeup_lat -= odpl->activate_lat;
+        }
+
+        return 0;
+}
+
+/**
+ * _omap_device_deactivate - decrease device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: decrease to latency target (0) or full inactivity (1)?
+ *
+ * Decrease readiness of omap_device @od (thus increasing device
+ * wakeup latency, but conserving power).  If @ignore_lat is
+ * IGNORE_WAKEUP_LAT, make the omap_device fully inactive.  Otherwise,
+ * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
+ * latency is less than the requested maximum wakeup latency, step
+ * forwards in the omap_device_pm_latency table to ensure the device's
+ * maximum wakeup latency is less than or equal to the requested
+ * maximum wakeup latency.  Returns 0.
+ */
+static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
+{
+        u32 a, b;
+
+        pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+
+        while (od->pm_lat_level < od->pm_lats_cnt) {
+                struct omap_device_pm_latency *odpl;
+                int deact_lat = 0;
+
+                odpl = od->pm_lats + od->pm_lat_level;
+
+                if (!ignore_lat &&
+                    ((od->dev_wakeup_lat + odpl->activate_lat) >
+                     od->_dev_wakeup_lat_limit))
+                        break;
+
+                a = _read_32ksynct();
+
+                /* XXX check return code */
+                odpl->deactivate_func(od);
+
+                b = _read_32ksynct();
+
+                deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+
+                pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
+                         "%d usec\n", od->pdev.name, od->pm_lat_level,
+                         deact_lat);
+
+                WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
+                     "deactivate step %d took longer than expected (%d > %d)\n",
+                     od->pdev.name, od->pdev.id, od->pm_lat_level,
+                     deact_lat, odpl->deactivate_lat);
+
+                od->dev_wakeup_lat += odpl->activate_lat;
+
+                od->pm_lat_level++;
+        }
+
+        return 0;
+}
+
+static inline struct omap_device *_find_by_pdev(struct platform_device *pdev)
+{
+        return container_of(pdev, struct omap_device, pdev);
+}
+
+
+/* Public functions for use by core code */
+
+/**
+ * omap_device_count_resources - count number of struct resource entries needed
+ * @od: struct omap_device *
+ *
+ * Count the number of struct resource entries needed for this
+ * omap_device @od.  Used by omap_device_build_ss() to determine how
+ * much memory to allocate before calling
+ * omap_device_fill_resources().  Returns the count.
+ */
+int omap_device_count_resources(struct omap_device *od)
+{
+        struct omap_hwmod *oh;
+        int c = 0;
+        int i;
+
+        for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+                c += omap_hwmod_count_resources(oh);
+
+        pr_debug("omap_device: %s: counted %d total resources across %d "
+                 "hwmods\n", od->pdev.name, c, od->hwmods_cnt);
+
+        return c;
+}
+
+/**
+ * omap_device_fill_resources - fill in array of struct resource
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the resource data for this omap_device @od.  Used by
+ * omap_device_build_ss() after calling omap_device_count_resources().
+ * Ideally this function would not be needed at all.  If omap_device
+ * replaces platform_device, then we can specify our own
+ * get_resource()/ get_irq()/etc functions that use the underlying
+ * omap_hwmod information.  Or if platform_device is extended to use
+ * subarchitecture-specific function pointers, the various
+ * platform_device functions can simply call omap_device internal
+ * functions to get device resources.  Hacking around the existing
+ * platform_device code wastes memory.  Returns 0.
+ */
+int omap_device_fill_resources(struct omap_device *od, struct resource *res)
+{
+        struct omap_hwmod *oh;
+        int c = 0;
+        int i, r;
+
+        for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) {
+                r = omap_hwmod_fill_resources(oh, res);
+                res += r;
+                c += r;
+        }
+
+        return 0;
+}
+
+/**
+ * omap_device_build - build and register an omap_device with one omap_hwmod
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for building and registering a single
+ * omap_device record, which in turn builds and registers a
+ * platform_device record.  See omap_device_build_ss() for more
+ * information.  Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
+ * passes along the return value of omap_device_build_ss().
+ */
+struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+                                      struct omap_hwmod *oh, void *pdata,
+                                      int pdata_len,
+                                      struct omap_device_pm_latency *pm_lats,
+                                      int pm_lats_cnt)
+{
+        struct omap_hwmod *ohs[] = { oh };
+
+        if (!oh)
+                return ERR_PTR(-EINVAL);
+
+        return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
+                                    pdata_len, pm_lats, pm_lats_cnt);
+}
+
+/**
+ * omap_device_build_ss - build and register an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for building and registering an omap_device
+ * subsystem record.  Subsystem records consist of multiple
+ * omap_hwmods.  This function in turn builds and registers a
+ * platform_device record.  Returns an ERR_PTR() on error, or passes
+ * along the return value of omap_device_register().
+ */
+struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+                                         struct omap_hwmod **ohs, int oh_cnt,
+                                         void *pdata, int pdata_len,
+                                         struct omap_device_pm_latency *pm_lats,
+                                         int pm_lats_cnt)
+{
+        int ret = -ENOMEM;
+        struct omap_device *od;
+        char *pdev_name2;
+        struct resource *res = NULL;
+        int res_count;
+        struct omap_hwmod **hwmods;
+
+        if (!ohs || oh_cnt == 0 || !pdev_name)
+                return ERR_PTR(-EINVAL);
+
+        if (!pdata && pdata_len > 0)
+                return ERR_PTR(-EINVAL);
+
+        pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
+                 oh_cnt);
+
+        od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+        if (!od)
+                return ERR_PTR(-ENOMEM);
+
+        od->hwmods_cnt = oh_cnt;
+
+        hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
+                         GFP_KERNEL);
+        if (!hwmods)
+                goto odbs_exit1;
+
+        memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
+        od->hwmods = hwmods;
+
+        pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL);
+        if (!pdev_name2)
+                goto odbs_exit2;
+        strcpy(pdev_name2, pdev_name);
+
+        od->pdev.name = pdev_name2;
+        od->pdev.id = pdev_id;
+
+        res_count = omap_device_count_resources(od);
+        if (res_count > 0) {
+                res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
+                if (!res)
+                        goto odbs_exit3;
+        }
+        omap_device_fill_resources(od, res);
+
+        od->pdev.num_resources = res_count;
+        od->pdev.resource = res;
+
+        platform_device_add_data(&od->pdev, pdata, pdata_len);
+
+        od->pm_lats = pm_lats;
+        od->pm_lats_cnt = pm_lats_cnt;
+
+        ret = omap_device_register(od);
+        if (ret)
+                goto odbs_exit4;
+
+        return od;
+
+odbs_exit4:
+        kfree(res);
+odbs_exit3:
+        kfree(pdev_name2);
+odbs_exit2:
+        kfree(hwmods);
+odbs_exit1:
+        kfree(od);
+
+        pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
+
+        return ERR_PTR(ret);
+}
+
+/**
+ * omap_device_register - register an omap_device with one omap_hwmod
+ * @od: struct omap_device * to register
+ *
+ * Register the omap_device structure.  This currently just calls
+ * platform_device_register() on the underlying platform_device.
+ * Returns the return value of platform_device_register().
+ */
+int omap_device_register(struct omap_device *od)
+{
+        pr_debug("omap_device: %s: registering\n", od->pdev.name);
+
+        return platform_device_register(&od->pdev);
+}
+
+
+/* Public functions for use by device drivers through struct platform_data */
+
+/**
+ * omap_device_enable - fully activate an omap_device
+ * @od: struct omap_device * to activate
+ *
+ * Do whatever is necessary for the hwmods underlying omap_device @od
+ * to be accessible and ready to operate.  This generally involves
+ * enabling clocks, setting SYSCONFIG registers; and in the future may
+ * involve remuxing pins.  Device drivers should call this function
+ * (through platform_data function pointers) where they would normally
+ * enable clocks, etc.  Returns -EINVAL if called when the omap_device
+ * is already enabled, or passes along the return value of
+ * _omap_device_activate().
+ */
+int omap_device_enable(struct platform_device *pdev)
+{
+        int ret;
+        struct omap_device *od;
+
+        od = _find_by_pdev(pdev);
+
+        if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+                WARN(1, "omap_device: %s.%d: omap_device_enable() called from "
+                     "invalid state\n", od->pdev.name, od->pdev.id);
+                return -EINVAL;
+        }
+
+        /* Enable everything if we're enabling this device from scratch */
+        if (od->_state == OMAP_DEVICE_STATE_UNKNOWN)
+                od->pm_lat_level = od->pm_lats_cnt;
+
+        ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
+
+        od->dev_wakeup_lat = 0;
+        od->_dev_wakeup_lat_limit = INT_MAX;
+        od->_state = OMAP_DEVICE_STATE_ENABLED;
+
+        return ret;
+}
+
+/**
+ * omap_device_idle - idle an omap_device
+ * @od: struct omap_device * to idle
+ *
+ * Idle omap_device @od by calling as many .deactivate_func() entries
+ * in the omap_device's pm_lats table as is possible without exceeding
+ * the device's maximum wakeup latency limit, pm_lat_limit.  Device
+ * drivers should call this function (through platform_data function
+ * pointers) where they would normally disable clocks after operations
+ * complete, etc..  Returns -EINVAL if the omap_device is not
+ * currently enabled, or passes along the return value of
+ * _omap_device_deactivate().
+ */
+int omap_device_idle(struct platform_device *pdev)
+{
+        int ret;
+        struct omap_device *od;
+
+        od = _find_by_pdev(pdev);
+
+        if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
+                WARN(1, "omap_device: %s.%d: omap_device_idle() called from "
+                     "invalid state\n", od->pdev.name, od->pdev.id);
+                return -EINVAL;
+        }
+
+        ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
+
+        od->_state = OMAP_DEVICE_STATE_IDLE;
+
+        return ret;
+}
+
+/**
+ * omap_device_shutdown - shut down an omap_device
+ * @od: struct omap_device * to shut down
+ *
+ * Shut down omap_device @od by calling all .deactivate_func() entries
+ * in the omap_device's pm_lats table and then shutting down all of
+ * the underlying omap_hwmods.  Used when a device is being "removed"
+ * or a device driver is being unloaded.  Returns -EINVAL if the
+ * omap_device is not currently enabled or idle, or passes along the
+ * return value of _omap_device_deactivate().
+ */
+int omap_device_shutdown(struct platform_device *pdev)
+{
+        int ret, i;
+        struct omap_device *od;
+        struct omap_hwmod *oh;
+
+        od = _find_by_pdev(pdev);
+
+        if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
+            od->_state != OMAP_DEVICE_STATE_IDLE) {
+                WARN(1, "omap_device: %s.%d: omap_device_shutdown() called "
+                     "from invalid state\n", od->pdev.name, od->pdev.id);
+                return -EINVAL;
+        }
+
+        ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);
+
+        for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+                omap_hwmod_shutdown(oh);
+
+        od->_state = OMAP_DEVICE_STATE_SHUTDOWN;
+
+        return ret;
+}
+
+/**
+ * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
+ * @od: struct omap_device *
+ *
+ * When a device's maximum wakeup latency limit changes, call some of
+ * the .activate_func or .deactivate_func function pointers in the
+ * omap_device's pm_lats array to ensure that the device's maximum
+ * wakeup latency is less than or equal to the new latency limit.
+ * Intended to be called by OMAP PM code whenever a device's maximum
+ * wakeup latency limit changes (e.g., via
+ * omap_pm_set_dev_wakeup_lat()).  Returns 0 if nothing needs to be
+ * done (e.g., if the omap_device is not currently idle, or if the
+ * wakeup latency is already current with the new limit) or passes
+ * along the return value of _omap_device_deactivate() or
+ * _omap_device_activate().
+ */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+                             u32 new_wakeup_lat_limit)
+{
+        int ret = -EINVAL;
+        struct omap_device *od;
+
+        od = _find_by_pdev(pdev);
+
+        if (new_wakeup_lat_limit == od->dev_wakeup_lat)
+                return 0;
+
+        od->_dev_wakeup_lat_limit = new_wakeup_lat_limit;
+
+        if (od->_state != OMAP_DEVICE_STATE_IDLE)
+                return 0;
+        else if (new_wakeup_lat_limit > od->dev_wakeup_lat)
+                ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
+        else if (new_wakeup_lat_limit < od->dev_wakeup_lat)
+                ret = _omap_device_activate(od, USE_WAKEUP_LAT);
+
+        return ret;
+}
+
+/**
+ * omap_device_get_pwrdm - return the powerdomain * associated with @od
+ * @od: struct omap_device *
+ *
+ * Return the powerdomain associated with the first underlying
+ * omap_hwmod for this omap_device.  Intended for use by core OMAP PM
+ * code.  Returns NULL on error or a struct powerdomain * upon
+ * success.
+ */
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
+{
+        /*
+         * XXX Assumes that all omap_hwmod powerdomains are identical.
+         * This may not necessarily be true.  There should be a sanity
+         * check in here to WARN() if any difference appears.
+         */
+        if (!od->hwmods_cnt)
+                return NULL;
+
+        return omap_hwmod_get_pwrdm(od->hwmods[0]);
+}
+
+/*
+ * Public functions intended for use in omap_device_pm_latency
+ * .activate_func and .deactivate_func function pointers
+ */
+
+/**
+ * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods
+ * @od: struct omap_device *od
+ *
+ * Enable all underlying hwmods.  Returns 0.
+ */
+int omap_device_enable_hwmods(struct omap_device *od)
+{
+        struct omap_hwmod *oh;
+        int i;
+
+        for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+                omap_hwmod_enable(oh);
+
+        /* XXX pass along return value here? */
+        return 0;
+}
+
+/**
+ * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
+ * @od: struct omap_device *od
+ *
+ * Idle all underlying hwmods.  Returns 0.
+ */
+int omap_device_idle_hwmods(struct omap_device *od)
+{
+        struct omap_hwmod *oh;
+        int i;
+
+        for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+                omap_hwmod_idle(oh);
+
+        /* XXX pass along return value here? */
+        return 0;
+}
+
+/**
+ * omap_device_disable_clocks - disable all main and interface clocks
+ * @od: struct omap_device *od
+ *
+ * Disable the main functional clock and interface clock for all of the
+ * omap_hwmods associated with the omap_device.  Returns 0.
+ */
+int omap_device_disable_clocks(struct omap_device *od)
+{
+        struct omap_hwmod *oh;
+        int i;
+
+        for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+                omap_hwmod_disable_clocks(oh);
+
+        /* XXX pass along return value here? */
+        return 0;
+}
+
+/**
+ * omap_device_enable_clocks - enable all main and interface clocks
+ * @od: struct omap_device *od
+ *
+ * Enable the main functional clock and interface clock for all of the
+ * omap_hwmods associated with the omap_device.  Returns 0.
+ */
+int omap_device_enable_clocks(struct omap_device *od)
+{
+        struct omap_hwmod *oh;
+        int i;
+
+        for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+                omap_hwmod_enable_clocks(oh);
+
+        /* XXX pass along return value here? */
+        return 0;
+}