[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

88 files changed, 7775 insertions, 48 deletions

diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index c2e741de0203..23a070599993 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -26,7 +26,7 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 6a955296e8c1..f4dff423ae7c 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -19,20 +19,20 @@
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/sdrc.h"
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 3c8ef1ac5f3d..ae1de308aaad 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -21,7 +21,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 7228ef8534b7..5b73bb274452 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -13,11 +13,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index a47695c3171a..9422dee7de84 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -13,13 +13,13 @@
 #include <linux/leds.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 9b4240b9d65f..187e3d8bfdfe 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -14,17 +14,17 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
+#include <mach/mcbsp.h>
 
 #if     defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 69450d61cf4f..a63b644ad305 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -28,10 +28,10 @@
 #include <linux/io.h>
 
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/tc.h>
+#include <mach/tc.h>
 
 #undef DEBUG
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 30b6f2c9cb33..743a4abcd85d 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -32,10 +32,10 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/hardware.h>
+#include <mach/dmtimer.h>
 #include <asm/io.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 /* register offsets */
 #define _OMAP_TIMER_ID_OFFSET           0x00
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index b0b3c5419b0a..17a92a31e746 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -28,13 +28,13 @@
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/omapfb.h>
+#include <mach/board.h>
+#include <mach/sram.h>
+#include <mach/omapfb.h>
 
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7112b5db4a36..3e76ee2bc731 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -18,10 +18,10 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
 #include <asm/mach/irq.h>
 
 #include <asm/io.h>
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 647ed5971c60..0e6d147ab6f8 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,7 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #define OMAP_I2C_SIZE           0x3f
 #define OMAP1_I2C_BASE          0xfffb3800
diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h
new file mode 100644
index 000000000000..5ccedac77526
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/aic23.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/plat-omap/include/mach/aic23.h
+ *
+ * Hardware definitions for TI TLV320AIC23 audio codec
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_AIC23_H
+#define __ASM_ARCH_AIC23_H
+
+// Codec TLV320AIC23
+#define LEFT_LINE_VOLUME_ADDR           0x00
+#define RIGHT_LINE_VOLUME_ADDR          0x01
+#define LEFT_CHANNEL_VOLUME_ADDR        0x02
+#define RIGHT_CHANNEL_VOLUME_ADDR       0x03
+#define ANALOG_AUDIO_CONTROL_ADDR       0x04
+#define DIGITAL_AUDIO_CONTROL_ADDR      0x05
+#define POWER_DOWN_CONTROL_ADDR         0x06
+#define DIGITAL_AUDIO_FORMAT_ADDR       0x07
+#define SAMPLE_RATE_CONTROL_ADDR        0x08
+#define DIGITAL_INTERFACE_ACT_ADDR      0x09
+#define RESET_CONTROL_ADDR              0x0F
+
+// Left (right) line input volume control register
+#define LRS_ENABLED                     0x0100
+#define LIM_MUTED                       0x0080
+#define LIV_DEFAULT                     0x0017
+#define LIV_MAX                         0x001f
+#define LIV_MIN                         0x0000
+
+// Left (right) channel headphone volume control register
+#define LZC_ON                          0x0080
+#define LHV_DEFAULT                     0x0079
+#define LHV_MAX                         0x007f
+#define LHV_MIN                         0x0000
+
+// Analog audio path control register
+#define STA_REG(x)                      ((x)<<6)
+#define STE_ENABLED                     0x0020
+#define DAC_SELECTED                    0x0010
+#define BYPASS_ON                       0x0008
+#define INSEL_MIC                       0x0004
+#define MICM_MUTED                      0x0002
+#define MICB_20DB                       0x0001
+
+// Digital audio path control register
+#define DACM_MUTE                       0x0008
+#define DEEMP_32K                       0x0002
+#define DEEMP_44K                       0x0004
+#define DEEMP_48K                       0x0006
+#define ADCHP_ON                        0x0001
+
+// Power control down register
+#define DEVICE_POWER_OFF                0x0080
+#define CLK_OFF                         0x0040
+#define OSC_OFF                         0x0020
+#define OUT_OFF                         0x0010
+#define DAC_OFF                         0x0008
+#define ADC_OFF                         0x0004
+#define MIC_OFF                         0x0002
+#define LINE_OFF                        0x0001
+
+// Digital audio interface register
+#define MS_MASTER                       0x0040
+#define LRSWAP_ON                       0x0020
+#define LRP_ON                          0x0010
+#define IWL_16                          0x0000
+#define IWL_20                          0x0004
+#define IWL_24                          0x0008
+#define IWL_32                          0x000C
+#define FOR_I2S                         0x0002
+#define FOR_DSP                         0x0003
+
+// Sample rate control register
+#define CLKOUT_HALF                     0x0080
+#define CLKIN_HALF                      0x0040
+#define BOSR_384fs                      0x0002 // BOSR_272fs when in USB mode
+#define USB_CLK_ON                      0x0001
+#define SR_MASK                         0xf
+#define CLKOUT_SHIFT                    7
+#define CLKIN_SHIFT                     6
+#define SR_SHIFT                        2
+#define BOSR_SHIFT                      1
+
+// Digital interface register
+#define ACT_ON                          0x0001
+
+#define TLV320AIC23ID1                  (0x1a)  // cs low
+#define TLV320AIC23ID2                  (0x1b)  // cs high
+
+void aic23_power_up(void);
+void aic23_power_down(void);
+
+#endif /* __ASM_ARCH_AIC23_H */
diff --git a/arch/arm/plat-omap/include/mach/blizzard.h b/arch/arm/plat-omap/include/mach/blizzard.h
new file mode 100644
index 000000000000..8d160f171372
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/blizzard.h
@@ -0,0 +1,12 @@
+#ifndef _BLIZZARD_H
+#define _BLIZZARD_H
+
+struct blizzard_platform_data {
+        void            (*power_up)(struct device *dev);
+        void            (*power_down)(struct device *dev);
+        unsigned long   (*get_clock_rate)(struct device *dev);
+
+        unsigned        te_connected : 1;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
new file mode 100644
index 000000000000..cf1dc0223949
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-2430sdp.h
+ *
+ * Hardware definitions for TI OMAP2430 SDP board.
+ *
+ * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_2430SDP_H
+#define __ASM_ARCH_OMAP_2430SDP_H
+
+/* Placeholder for 2430SDP specific defines */
+#define OMAP24XX_ETHR_START              0x08000300
+#define OMAP24XX_ETHR_GPIO_IRQ          149
+#define SDP2430_CS0_BASE                0x04000000
+
+#define TWL4030_IRQNUM                  INT_24XX_SYS_NIRQ
+
+#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/mach/board-ams-delta.h
new file mode 100644
index 000000000000..51b102dc906b
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-ams-delta.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
+#define __ASM_ARCH_OMAP_AMS_DELTA_H
+
+#if defined (CONFIG_MACH_AMS_DELTA)
+
+#define AMS_DELTA_LATCH1_PHYS           0x01000000
+#define AMS_DELTA_LATCH1_VIRT           0xEA000000
+#define AMS_DELTA_MODEM_PHYS            0x04000000
+#define AMS_DELTA_MODEM_VIRT            0xEB000000
+#define AMS_DELTA_LATCH2_PHYS           0x08000000
+#define AMS_DELTA_LATCH2_VIRT           0xEC000000
+
+#define AMS_DELTA_LATCH1_LED_CAMERA     0x01
+#define AMS_DELTA_LATCH1_LED_ADVERT     0x02
+#define AMS_DELTA_LATCH1_LED_EMAIL      0x04
+#define AMS_DELTA_LATCH1_LED_HANDSFREE  0x08
+#define AMS_DELTA_LATCH1_LED_VOICEMAIL  0x10
+#define AMS_DELTA_LATCH1_LED_VOICE      0x20
+
+#define AMS_DELTA_LATCH2_LCD_VBLEN      0x0001
+#define AMS_DELTA_LATCH2_LCD_NDISP      0x0002
+#define AMS_DELTA_LATCH2_NAND_NCE       0x0004
+#define AMS_DELTA_LATCH2_NAND_NRE       0x0008
+#define AMS_DELTA_LATCH2_NAND_NWP       0x0010
+#define AMS_DELTA_LATCH2_NAND_NWE       0x0020
+#define AMS_DELTA_LATCH2_NAND_ALE       0x0040
+#define AMS_DELTA_LATCH2_NAND_CLE       0x0080
+#define AMD_DELTA_LATCH2_KEYBRD_PWR     0x0100
+#define AMD_DELTA_LATCH2_KEYBRD_DATA    0x0200
+#define AMD_DELTA_LATCH2_SCARD_RSTIN    0x0400
+#define AMD_DELTA_LATCH2_SCARD_CMDVCC   0x0800
+#define AMS_DELTA_LATCH2_MODEM_NRESET   0x1000
+#define AMS_DELTA_LATCH2_MODEM_CODEC    0x2000
+
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA  0
+#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK   1
+#define AMS_DELTA_GPIO_PIN_MODEM_IRQ    2
+#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH  4
+#define AMS_DELTA_GPIO_PIN_SCARD_NOFF   6
+#define AMS_DELTA_GPIO_PIN_SCARD_IO     7
+#define AMS_DELTA_GPIO_PIN_CONFIG       11
+#define AMS_DELTA_GPIO_PIN_NAND_RB      12
+
+#ifndef __ASSEMBLY__
+void ams_delta_latch1_write(u8 mask, u8 value);
+void ams_delta_latch2_write(u16 mask, u16 value);
+#endif
+
+#endif /* CONFIG_MACH_AMS_DELTA */
+
+#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
new file mode 100644
index 000000000000..d6f2a8e963d5
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-apollon.h
+ *
+ * Hardware definitions for Samsung OMAP24XX Apollon board.
+ *
+ * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_APOLLON_H
+#define __ASM_ARCH_OMAP_APOLLON_H
+
+extern void apollon_mmc_init(void);
+
+/* Placeholder for APOLLON specific defines */
+#define APOLLON_ETHR_GPIO_IRQ           74
+
+#endif /*  __ASM_ARCH_OMAP_APOLLON_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-fsample.h b/arch/arm/plat-omap/include/mach/board-fsample.h
new file mode 100644
index 000000000000..cb3c5ae12776
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-fsample.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-fsample.h
+ *
+ * Board-specific goodies for TI F-Sample.
+ *
+ * Copyright (C) 2006 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
+#define __ASM_ARCH_OMAP_FSAMPLE_H
+
+/* fsample is pretty close to p2-sample */
+#include <mach/board-perseus2.h>
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE    0xE8100000
+#define FSAMPLE_CPLD_SIZE    SZ_4K
+#define FSAMPLE_CPLD_START   0x05080000
+
+#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET         0
+#define FSAMPLE_CPLD_BIT_LCD_RESET        1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
+#define FSAMPLE_CPLD_BIT_OTG_RESET        9
+
+#define fsample_cpld_set(bit) \
+    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/plat-omap/include/mach/board-h2.h
new file mode 100644
index 000000000000..2a050e9be65f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h2.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h2.h
+ *
+ * Hardware definitions for TI OMAP1610 H2 board.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H2_H
+#define __ASM_ARCH_OMAP_H2_H
+
+/* Placeholder for H2 specific defines */
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define OMAP1610_ETHR_START             0x04000300
+
+extern void h2_mmc_init(void);
+extern void h2_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /*  __ASM_ARCH_OMAP_H2_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h
new file mode 100644
index 000000000000..14909dc7858a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h3.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h3.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_H3_H
+#define __ASM_ARCH_OMAP_H3_H
+
+/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
+#define OMAP1710_ETHR_START             0x04000300
+
+extern void h3_mmc_init(void);
+extern void h3_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
new file mode 100644
index 000000000000..1470cd3e519b
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h4.h
+ *
+ * Hardware definitions for TI OMAP1610 H4 board.
+ *
+ * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H4_H
+#define __ASM_ARCH_OMAP_H4_H
+
+/* Placeholder for H4 specific defines */
+#define OMAP24XX_ETHR_GPIO_IRQ          92
+#endif /*  __ASM_ARCH_OMAP_H4_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-innovator.h b/arch/arm/plat-omap/include/mach/board-innovator.h
new file mode 100644
index 000000000000..5ae3e79b9f9c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-innovator.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-innovator.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
+#define __ASM_ARCH_OMAP_INNOVATOR_H
+
+#if defined (CONFIG_ARCH_OMAP15XX)
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE                       D256M_1X16_4B
+#endif
+
+#define OMAP1510P1_IMIF_PRI_VALUE               0x00
+#define OMAP1510P1_EMIFS_PRI_VALUE              0x00
+#define OMAP1510P1_EMIFF_PRI_VALUE              0x00
+
+#ifndef __ASSEMBLY__
+void fpga_write(unsigned char val, int reg);
+unsigned char fpga_read(int reg);
+#endif
+
+#endif /* CONFIG_ARCH_OMAP15XX */
+
+#if defined (CONFIG_ARCH_OMAP16XX)
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START        0x04000300
+
+#endif /* CONFIG_ARCH_OMAP1610 */
+#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
diff --git a/arch/arm/plat-omap/include/mach/board-nokia.h b/arch/arm/plat-omap/include/mach/board-nokia.h
new file mode 100644
index 000000000000..2abbe001af8c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-nokia.h
@@ -0,0 +1,54 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board-nokia.h
+ *
+ *  Information structures for Nokia-specific board config data
+ *
+ *  Copyright (C) 2005  Nokia Corporation
+ */
+
+#ifndef _OMAP_BOARD_NOKIA_H
+#define _OMAP_BOARD_NOKIA_H
+
+#include <linux/types.h>
+
+#define OMAP_TAG_NOKIA_BT       0x4e01
+#define OMAP_TAG_WLAN_CX3110X   0x4e02
+#define OMAP_TAG_CBUS           0x4e03
+#define OMAP_TAG_EM_ASIC_BB5    0x4e04
+
+
+#define BT_CHIP_CSR             1
+#define BT_CHIP_TI              2
+
+#define BT_SYSCLK_12            1
+#define BT_SYSCLK_38_4          2
+
+struct omap_bluetooth_config {
+        u8    chip_type;
+        u8    bt_wakeup_gpio;
+        u8    host_wakeup_gpio;
+        u8    reset_gpio;
+        u8    bt_uart;
+        u8    bd_addr[6];
+        u8    bt_sysclk;
+};
+
+struct omap_wlan_cx3110x_config {
+        u8  chip_type;
+        s16 power_gpio;
+        s16 irq_gpio;
+        s16 spi_cs_gpio;
+};
+
+struct omap_cbus_config {
+        s16 clk_gpio;
+        s16 dat_gpio;
+        s16 sel_gpio;
+};
+
+struct omap_em_asic_bb5_config {
+        s16 retu_irq_gpio;
+        s16 tahvo_irq_gpio;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-osk.h b/arch/arm/plat-omap/include/mach/board-osk.h
new file mode 100644
index 000000000000..3850cb1f220a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-osk.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-osk.h
+ *
+ * Hardware definitions for TI OMAP5912 OSK board.
+ *
+ * Written by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_OSK_H
+#define __ASM_ARCH_OMAP_OSK_H
+
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START             0x04800300
+
+/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE               (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#       define OSK_TPS_GPIO_USB_PWR_EN  (OSK_TPS_GPIO_BASE + 0)
+#       define OSK_TPS_GPIO_LED_D3      (OSK_TPS_GPIO_BASE + 1)
+#       define OSK_TPS_GPIO_LAN_RESET   (OSK_TPS_GPIO_BASE + 2)
+#       define OSK_TPS_GPIO_DSP_PWR_EN  (OSK_TPS_GPIO_BASE + 3)
+#       define OSK_TPS_GPIO_LED_D9      (OSK_TPS_GPIO_BASE + 4)
+#       define OSK_TPS_GPIO_LED_D2      (OSK_TPS_GPIO_BASE + 5)
+
+#endif /*  __ASM_ARCH_OMAP_OSK_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-palmte.h b/arch/arm/plat-omap/include/mach/board-palmte.h
new file mode 100644
index 000000000000..6906cdebbcfb
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmte.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmte.h
+ *
+ * Hardware definitions for the Palm Tungsten E device.
+ *
+ * Maintainters :       http://palmtelinux.sf.net
+ *                      palmtelinux-developpers@lists.sf.net
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMTE_H
+#define __OMAP_BOARD_PALMTE_H
+
+#define PALMTE_USBDETECT_GPIO   0
+#define PALMTE_USB_OR_DC_GPIO   1
+#define PALMTE_TSC_GPIO         4
+#define PALMTE_PINTDAV_GPIO     6
+#define PALMTE_MMC_WP_GPIO      8
+#define PALMTE_MMC_POWER_GPIO   9
+#define PALMTE_HDQ_GPIO         11
+#define PALMTE_HEADPHONES_GPIO  14
+#define PALMTE_SPEAKER_GPIO     15
+#define PALMTE_DC_GPIO          OMAP_MPUIO(2)
+#define PALMTE_MMC_SWITCH_GPIO  OMAP_MPUIO(4)
+#define PALMTE_MMC1_GPIO        OMAP_MPUIO(6)
+#define PALMTE_MMC2_GPIO        OMAP_MPUIO(7)
+#define PALMTE_MMC3_GPIO        OMAP_MPUIO(11)
+
+#endif  /* __OMAP_BOARD_PALMTE_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmtt.h b/arch/arm/plat-omap/include/mach/board-palmtt.h
new file mode 100644
index 000000000000..e79f382b5931
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmtt.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmte.h
+ *
+ * Hardware definitions for the Palm Tungsten|T device.
+ *
+ * Maintainters :       Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMTT_H
+#define __OMAP_BOARD_PALMTT_H
+
+#define PALMTT_USBDETECT_GPIO   0
+#define PALMTT_CABLE_GPIO       1
+#define PALMTT_LED_GPIO         3
+#define PALMTT_PENIRQ_GPIO      6
+#define PALMTT_MMC_WP_GPIO      8
+#define PALMTT_HDQ_GPIO         11
+
+#endif  /* __OMAP_BOARD_PALMTT_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmz71.h b/arch/arm/plat-omap/include/mach/board-palmz71.h
new file mode 100644
index 000000000000..b1d7d579b313
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmz71.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmz71.h
+ *
+ * Hardware definitions for the Palm Zire71 device.
+ *
+ * Maintainters :       Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMZ71_H
+#define __OMAP_BOARD_PALMZ71_H
+
+#define PALMZ71_USBDETECT_GPIO  0
+#define PALMZ71_PENIRQ_GPIO     6
+#define PALMZ71_MMC_WP_GPIO     8
+#define PALMZ71_HDQ_GPIO        11
+
+#define PALMZ71_HOTSYNC_GPIO    OMAP_MPUIO(1)
+#define PALMZ71_CABLE_GPIO      OMAP_MPUIO(2)
+#define PALMZ71_SLIDER_GPIO     OMAP_MPUIO(3)
+#define PALMZ71_MMC_IN_GPIO     OMAP_MPUIO(4)
+
+#endif  /* __OMAP_BOARD_PALMZ71_H */
diff --git a/arch/arm/plat-omap/include/mach/board-perseus2.h b/arch/arm/plat-omap/include/mach/board-perseus2.h
new file mode 100644
index 000000000000..c06c3d717d57
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-perseus2.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board-perseus2.h
+ *
+ *  Copyright 2003 by Texas Instruments Incorporated
+ *    OMAP730 / Perseus2 support by Jean Pihet
+ *
+ * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
+ * Author: RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
+#define __ASM_ARCH_OMAP_PERSEUS2_H
+
+#include <mach/fpga.h>
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE               D256M_1X16_4B
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-sx1.h b/arch/arm/plat-omap/include/mach/board-sx1.h
new file mode 100644
index 000000000000..355adbdaae33
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-sx1.h
@@ -0,0 +1,52 @@
+/*
+ * Siemens SX1 board definitions
+ *
+ * Copyright: Vovan888 at gmail com
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
+#define __ASM_ARCH_SX1_I2C_CHIPS_H
+
+#define SOFIA_MAX_LIGHT_VAL     0x2B
+
+#define SOFIA_I2C_ADDR          0x32
+/* Sofia reg 3 bits masks */
+#define SOFIA_POWER1_REG        0x03
+
+#define SOFIA_USB_POWER         0x01
+#define SOFIA_MMC_POWER         0x04
+#define SOFIA_BLUETOOTH_POWER   0x08
+#define SOFIA_MMILIGHT_POWER    0x20
+
+#define SOFIA_POWER2_REG        0x04
+#define SOFIA_BACKLIGHT_REG     0x06
+#define SOFIA_KEYLIGHT_REG      0x07
+#define SOFIA_DIMMING_REG       0x09
+
+
+/* Function Prototypes for SX1 devices control on I2C bus */
+
+int sx1_setbacklight(u8 backlight);
+int sx1_getbacklight(u8 *backlight);
+int sx1_setkeylight(u8 keylight);
+int sx1_getkeylight(u8 *keylight);
+
+int sx1_setmmipower(u8 onoff);
+int sx1_setusbpower(u8 onoff);
+int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
+int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
+
+/* MMC prototypes */
+
+extern void sx1_mmc_init(void);
+extern void sx1_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h
new file mode 100644
index 000000000000..ed6d346ee123
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-voiceblue.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Hardware definitions for OMAP5910 based VoiceBlue board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VOICEBLUE_H
+#define __ASM_ARCH_VOICEBLUE_H
+
+extern void voiceblue_wdt_enable(void);
+extern void voiceblue_wdt_disable(void);
+extern void voiceblue_wdt_ping(void);
+extern void voiceblue_reset(void);
+
+#endif /*  __ASM_ARCH_VOICEBLUE_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
new file mode 100644
index 000000000000..54445642f35d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -0,0 +1,186 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004  Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/types.h>
+
+#include <mach/gpio-switch.h>
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK          0x4f01
+#define OMAP_TAG_MMC            0x4f02
+#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
+#define OMAP_TAG_USB            0x4f04
+#define OMAP_TAG_LCD            0x4f05
+#define OMAP_TAG_GPIO_SWITCH    0x4f06
+#define OMAP_TAG_UART           0x4f07
+#define OMAP_TAG_FBMEM          0x4f08
+#define OMAP_TAG_STI_CONSOLE    0x4f09
+#define OMAP_TAG_CAMERA_SENSOR  0x4f0a
+
+#define OMAP_TAG_BOOT_REASON    0x4f80
+#define OMAP_TAG_FLASH_PART     0x4f81
+#define OMAP_TAG_VERSION_STR    0x4f82
+
+struct omap_clock_config {
+        /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+        u8 system_clock_type;
+};
+
+struct omap_mmc_conf {
+        unsigned enabled:1;
+        /* nomux means "standard" muxing is wrong on this board, and that
+         * board-specific code handled it before common init logic.
+         */
+        unsigned nomux:1;
+        /* switch pin can be for card detect (default) or card cover */
+        unsigned cover:1;
+        /* 4 wire signaling is optional, and is only used for SD/SDIO */
+        unsigned wire4:1;
+        s16 power_pin;
+        s16 switch_pin;
+        s16 wp_pin;
+};
+
+struct omap_mmc_config {
+        struct omap_mmc_conf mmc[2];
+};
+
+struct omap_serial_console_config {
+        u8 console_uart;
+        u32 console_speed;
+};
+
+struct omap_sti_console_config {
+        unsigned enable:1;
+        u8 channel;
+};
+
+struct omap_camera_sensor_config {
+        u16 reset_gpio;
+        int (*power_on)(void * data);
+        int (*power_off)(void * data);
+};
+
+struct omap_usb_config {
+        /* Configure drivers according to the connectors on your board:
+         *  - "A" connector (rectagular)
+         *      ... for host/OHCI use, set "register_host".
+         *  - "B" connector (squarish) or "Mini-B"
+         *      ... for device/gadget use, set "register_dev".
+         *  - "Mini-AB" connector (very similar to Mini-B)
+         *      ... for OTG use as device OR host, initialize "otg"
+         */
+        unsigned        register_host:1;
+        unsigned        register_dev:1;
+        u8              otg;    /* port number, 1-based:  usb1 == 2 */
+
+        u8              hmc_mode;
+
+        /* implicitly true if otg:  host supports remote wakeup? */
+        u8              rwc;
+
+        /* signaling pins used to talk to transceiver on usbN:
+         *  0 == usbN unused
+         *  2 == usb0-only, using internal transceiver
+         *  3 == 3 wire bidirectional
+         *  4 == 4 wire bidirectional
+         *  6 == 6 wire unidirectional (or TLL)
+         */
+        u8              pins[3];
+};
+
+struct omap_lcd_config {
+        char panel_name[16];
+        char ctrl_name[16];
+        s16  nreset_gpio;
+        u8   data_lines;
+};
+
+struct device;
+struct fb_info;
+struct omap_backlight_config {
+        int default_intensity;
+        int (*set_power)(struct device *dev, int state);
+        int (*check_fb)(struct fb_info *fb);
+};
+
+struct omap_fbmem_config {
+        u32 start;
+        u32 size;
+};
+
+struct omap_pwm_led_platform_data {
+        const char *name;
+        int intensity_timer;
+        int blink_timer;
+        void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
+};
+
+/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
+struct omap_gpio_switch_config {
+        char name[12];
+        u16 gpio;
+        int flags:4;
+        int type:4;
+        int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+        /* Bit field of UARTs present; bit 0 --> UART1 */
+        unsigned int enabled_uarts;
+};
+
+
+struct omap_flash_part_config {
+        char part_table[0];
+};
+
+struct omap_boot_reason_config {
+        char reason_str[12];
+};
+
+struct omap_version_config {
+        char component[12];
+        char version[12];
+};
+
+
+#include <mach/board-nokia.h>
+
+struct omap_board_config_entry {
+        u16 tag;
+        u16 len;
+        u8  data[0];
+};
+
+struct omap_board_config_kernel {
+        u16 tag;
+        const void *data;
+};
+
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+        ((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+        ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
new file mode 100644
index 000000000000..92f7c7238fcd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/plat-omap/include/mach/clock.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_CLOCK_H
+#define __ARCH_ARM_OMAP_CLOCK_H
+
+struct module;
+struct clk;
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+struct clksel_rate {
+        u8                      div;
+        u32                     val;
+        u8                      flags;
+};
+
+struct clksel {
+        struct clk               *parent;
+        const struct clksel_rate *rates;
+};
+
+struct dpll_data {
+        void __iomem            *mult_div1_reg;
+        u32                     mult_mask;
+        u32                     div1_mask;
+        u16                     last_rounded_m;
+        u8                      last_rounded_n;
+        unsigned long           last_rounded_rate;
+        unsigned int            rate_tolerance;
+        u16                     max_multiplier;
+        u8                      max_divider;
+        u32                     max_tolerance;
+#  if defined(CONFIG_ARCH_OMAP3)
+        u8                      modes;
+        void __iomem            *control_reg;
+        u32                     enable_mask;
+        u8                      auto_recal_bit;
+        u8                      recal_en_bit;
+        u8                      recal_st_bit;
+        void __iomem            *autoidle_reg;
+        u32                     autoidle_mask;
+        void __iomem            *idlest_reg;
+        u8                      idlest_bit;
+#  endif
+};
+
+#endif
+
+struct clk {
+        struct list_head        node;
+        struct module           *owner;
+        const char              *name;
+        int                     id;
+        struct clk              *parent;
+        unsigned long           rate;
+        __u32                   flags;
+        void __iomem            *enable_reg;
+        __u8                    enable_bit;
+        __s8                    usecount;
+        void                    (*recalc)(struct clk *);
+        int                     (*set_rate)(struct clk *, unsigned long);
+        long                    (*round_rate)(struct clk *, unsigned long);
+        void                    (*init)(struct clk *);
+        int                     (*enable)(struct clk *);
+        void                    (*disable)(struct clk *);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+        u8                      fixed_div;
+        void __iomem            *clksel_reg;
+        u32                     clksel_mask;
+        const struct clksel     *clksel;
+        struct dpll_data        *dpll_data;
+#else
+        __u8                    rate_offset;
+        __u8                    src_offset;
+#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+        struct dentry           *dent;  /* For visible tree hierarchy */
+#endif
+};
+
+struct cpufreq_frequency_table;
+
+struct clk_functions {
+        int             (*clk_enable)(struct clk *clk);
+        void            (*clk_disable)(struct clk *clk);
+        long            (*clk_round_rate)(struct clk *clk, unsigned long rate);
+        int             (*clk_set_rate)(struct clk *clk, unsigned long rate);
+        int             (*clk_set_parent)(struct clk *clk, struct clk *parent);
+        struct clk *    (*clk_get_parent)(struct clk *clk);
+        void            (*clk_allow_idle)(struct clk *clk);
+        void            (*clk_deny_idle)(struct clk *clk);
+        void            (*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+        void            (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
+};
+
+extern unsigned int mpurate;
+
+extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern void followparent_recalc(struct clk * clk);
+extern void clk_allow_idle(struct clk *clk);
+extern void clk_deny_idle(struct clk *clk);
+extern int clk_get_usecount(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+
+/* Clock flags */
+#define RATE_CKCTL              (1 << 0)        /* Main fixed ratio clocks */
+#define RATE_FIXED              (1 << 1)        /* Fixed clock rate */
+#define RATE_PROPAGATES         (1 << 2)        /* Program children too */
+#define VIRTUAL_CLOCK           (1 << 3)        /* Composite clock from table */
+#define ALWAYS_ENABLED          (1 << 4)        /* Clock cannot be disabled */
+#define ENABLE_REG_32BIT        (1 << 5)        /* Use 32-bit access */
+#define VIRTUAL_IO_ADDRESS      (1 << 6)        /* Clock in virtual address */
+#define CLOCK_IDLE_CONTROL      (1 << 7)
+#define CLOCK_NO_IDLE_PARENT    (1 << 8)
+#define DELAYED_APP             (1 << 9)        /* Delay application of clock */
+#define CONFIG_PARTICIPANT      (1 << 10)       /* Fundamental clock */
+#define ENABLE_ON_INIT          (1 << 11)       /* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
+/* bits 13-20 are currently free */
+#define CLOCK_IN_OMAP310        (1 << 21)
+#define CLOCK_IN_OMAP730        (1 << 22)
+#define CLOCK_IN_OMAP1510       (1 << 23)
+#define CLOCK_IN_OMAP16XX       (1 << 24)
+#define CLOCK_IN_OMAP242X       (1 << 25)
+#define CLOCK_IN_OMAP243X       (1 << 26)
+#define CLOCK_IN_OMAP343X       (1 << 27)       /* clocks common to all 343X */
+#define PARENT_CONTROLS_CLOCK   (1 << 28)
+#define CLOCK_IN_OMAP3430ES1    (1 << 29)       /* 3430ES1 clocks only */
+#define CLOCK_IN_OMAP3430ES2    (1 << 30)       /* 3430ES2 clocks only */
+
+/* Clksel_rate flags */
+#define DEFAULT_RATE            (1 << 0)
+#define RATE_IN_242X            (1 << 1)
+#define RATE_IN_243X            (1 << 2)
+#define RATE_IN_343X            (1 << 3)        /* rates common to all 343X */
+#define RATE_IN_3430ES2         (1 << 4)        /* 3430ES2 rates only */
+
+#define RATE_IN_24XX            (RATE_IN_242X | RATE_IN_243X)
+
+
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
+#define CORE_CLK_SRC_32K                0
+#define CORE_CLK_SRC_DPLL               1
+#define CORE_CLK_SRC_DPLL_X2            2
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
new file mode 100644
index 000000000000..06093112b665
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/plat-omap/include/mach/common.h
+ *
+ * Header for code common to all OMAP machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
+#define __ARCH_ARM_MACH_OMAP_COMMON_H
+
+#include <linux/i2c.h>
+
+struct sys_timer;
+
+extern void omap_map_common_io(void);
+extern struct sys_timer omap_timer;
+extern void omap_serial_init(void);
+#ifdef CONFIG_I2C_OMAP
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+                                 struct i2c_board_info const *info,
+                                 unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+                                 struct i2c_board_info const *info,
+                                 unsigned len)
+{
+        return 0;
+}
+#endif
+
+/* IO bases for various OMAP processors */
+struct omap_globals {
+        void __iomem    *tap;           /* Control module ID code */
+        void __iomem    *sdrc;          /* SDRAM Controller */
+        void __iomem    *sms;           /* SDRAM Memory Scheduler */
+        void __iomem    *ctrl;          /* System Control Module */
+        void __iomem    *prm;           /* Power and Reset Management */
+        void __iomem    *cm;            /* Clock Management */
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_343x(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_memory(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
new file mode 100644
index 000000000000..e3fd62d9a995
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -0,0 +1,189 @@
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
+/*
+ * arch/arm/plat-omap/include/mach/control.h
+ *
+ * OMAP2/3 System Control Module definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+#define OMAP242X_CTRL_REGADDR(reg)                                      \
+        (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)                                      \
+        (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)                                      \
+        (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+
+/*
+ * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
+ * OMAP24XX and OMAP34XX.
+ */
+
+/* Control submodule offsets */
+
+#define OMAP2_CONTROL_INTERFACE         0x000
+#define OMAP2_CONTROL_PADCONFS          0x030
+#define OMAP2_CONTROL_GENERAL           0x270
+#define OMAP343X_CONTROL_MEM_WKUP       0x600
+#define OMAP343X_CONTROL_PADCONFS_WKUP  0xa00
+#define OMAP343X_CONTROL_GENERAL_WKUP   0xa60
+
+/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
+
+#define OMAP2_CONTROL_SYSCONFIG         (OMAP2_CONTROL_INTERFACE + 0x10)
+
+/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
+#define OMAP2_CONTROL_DEVCONF0          (OMAP2_CONTROL_GENERAL + 0x0004)
+#define OMAP2_CONTROL_MSUSPENDMUX_0     (OMAP2_CONTROL_GENERAL + 0x0020)
+#define OMAP2_CONTROL_MSUSPENDMUX_1     (OMAP2_CONTROL_GENERAL + 0x0024)
+#define OMAP2_CONTROL_MSUSPENDMUX_2     (OMAP2_CONTROL_GENERAL + 0x0028)
+#define OMAP2_CONTROL_MSUSPENDMUX_3     (OMAP2_CONTROL_GENERAL + 0x002c)
+#define OMAP2_CONTROL_MSUSPENDMUX_4     (OMAP2_CONTROL_GENERAL + 0x0030)
+#define OMAP2_CONTROL_MSUSPENDMUX_5     (OMAP2_CONTROL_GENERAL + 0x0034)
+#define OMAP2_CONTROL_SEC_CTRL          (OMAP2_CONTROL_GENERAL + 0x0040)
+#define OMAP2_CONTROL_RPUB_KEY_H_0      (OMAP2_CONTROL_GENERAL + 0x0090)
+#define OMAP2_CONTROL_RPUB_KEY_H_1      (OMAP2_CONTROL_GENERAL + 0x0094)
+#define OMAP2_CONTROL_RPUB_KEY_H_2      (OMAP2_CONTROL_GENERAL + 0x0098)
+#define OMAP2_CONTROL_RPUB_KEY_H_3      (OMAP2_CONTROL_GENERAL + 0x009c)
+
+/* 242x-only CONTROL_GENERAL register offsets */
+#define OMAP242X_CONTROL_DEVCONF        OMAP2_CONTROL_DEVCONF0 /* match TRM */
+#define OMAP242X_CONTROL_OCM_RAM_PERM   (OMAP2_CONTROL_GENERAL + 0x0068)
+
+/* 243x-only CONTROL_GENERAL register offsets */
+/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
+#define OMAP243X_CONTROL_DEVCONF1       (OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP243X_CONTROL_CSIRXFE        (OMAP2_CONTROL_GENERAL + 0x007c)
+#define OMAP243X_CONTROL_IVA2_BOOTADDR  (OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP243X_CONTROL_IVA2_BOOTMOD   (OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP243X_CONTROL_IVA2_GEMCFG    (OMAP2_CONTROL_GENERAL + 0x0198)
+
+/* 24xx-only CONTROL_GENERAL register offsets */
+#define OMAP24XX_CONTROL_DEBOBS         (OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP24XX_CONTROL_EMU_SUPPORT    (OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP24XX_CONTROL_SEC_TEST       (OMAP2_CONTROL_GENERAL + 0x0044)
+#define OMAP24XX_CONTROL_PSA_CTRL       (OMAP2_CONTROL_GENERAL + 0x0048)
+#define OMAP24XX_CONTROL_PSA_CMD        (OMAP2_CONTROL_GENERAL + 0x004c)
+#define OMAP24XX_CONTROL_PSA_VALUE      (OMAP2_CONTROL_GENERAL + 0x0050)
+#define OMAP24XX_CONTROL_SEC_EMU        (OMAP2_CONTROL_GENERAL + 0x0060)
+#define OMAP24XX_CONTROL_SEC_TAP        (OMAP2_CONTROL_GENERAL + 0x0064)
+#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD        (OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD  (OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD   (OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP24XX_CONTROL_SEC_STATUS             (OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP24XX_CONTROL_SEC_ERR_STATUS         (OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP24XX_CONTROL_STATUS                 (OMAP2_CONTROL_GENERAL + 0x0088)
+#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c)
+#define OMAP24XX_CONTROL_RAND_KEY_0     (OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP24XX_CONTROL_RAND_KEY_1     (OMAP2_CONTROL_GENERAL + 0x00a4)
+#define OMAP24XX_CONTROL_RAND_KEY_2     (OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP24XX_CONTROL_RAND_KEY_3     (OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP24XX_CONTROL_CUST_KEY_0     (OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP24XX_CONTROL_CUST_KEY_1     (OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP24XX_CONTROL_TEST_KEY_0     (OMAP2_CONTROL_GENERAL + 0x00c0)
+#define OMAP24XX_CONTROL_TEST_KEY_1     (OMAP2_CONTROL_GENERAL + 0x00c4)
+#define OMAP24XX_CONTROL_TEST_KEY_2     (OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP24XX_CONTROL_TEST_KEY_3     (OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP24XX_CONTROL_TEST_KEY_4     (OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP24XX_CONTROL_TEST_KEY_5     (OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP24XX_CONTROL_TEST_KEY_6     (OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP24XX_CONTROL_TEST_KEY_7     (OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP24XX_CONTROL_TEST_KEY_8     (OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP24XX_CONTROL_TEST_KEY_9     (OMAP2_CONTROL_GENERAL + 0x00e4)
+
+/* 34xx-only CONTROL_GENERAL register offsets */
+#define OMAP343X_CONTROL_PADCONF_OFF    (OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP343X_CONTROL_MEM_DFTRW0     (OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP343X_CONTROL_MEM_DFTRW1     (OMAP2_CONTROL_GENERAL + 0x000c)
+#define OMAP343X_CONTROL_DEVCONF1       (OMAP2_CONTROL_GENERAL + 0x0068)
+#define OMAP343X_CONTROL_CSIRXFE                (OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP343X_CONTROL_SEC_STATUS             (OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS         (OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG   (OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP343X_CONTROL_STATUS                 (OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP343X_CONTROL_RPUB_KEY_H_4   (OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP343X_CONTROL_RAND_KEY_0     (OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP343X_CONTROL_RAND_KEY_1     (OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP343X_CONTROL_RAND_KEY_2     (OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP343X_CONTROL_RAND_KEY_3     (OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP343X_CONTROL_TEST_KEY_0     (OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP343X_CONTROL_TEST_KEY_1     (OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP343X_CONTROL_TEST_KEY_2     (OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP343X_CONTROL_TEST_KEY_3     (OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP343X_CONTROL_TEST_KEY_4     (OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP343X_CONTROL_TEST_KEY_5     (OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP343X_CONTROL_TEST_KEY_6     (OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP343X_CONTROL_TEST_KEY_7     (OMAP2_CONTROL_GENERAL + 0x00e4)
+#define OMAP343X_CONTROL_TEST_KEY_8     (OMAP2_CONTROL_GENERAL + 0x00e8)
+#define OMAP343X_CONTROL_TEST_KEY_9     (OMAP2_CONTROL_GENERAL + 0x00ec)
+#define OMAP343X_CONTROL_TEST_KEY_10    (OMAP2_CONTROL_GENERAL + 0x00f0)
+#define OMAP343X_CONTROL_TEST_KEY_11    (OMAP2_CONTROL_GENERAL + 0x00f4)
+#define OMAP343X_CONTROL_TEST_KEY_12    (OMAP2_CONTROL_GENERAL + 0x00f8)
+#define OMAP343X_CONTROL_TEST_KEY_13    (OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_IVA2_BOOTADDR  (OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD   (OMAP2_CONTROL_GENERAL + 0x0194)
+
+/*
+ * REVISIT: This list of registers is not comprehensive - there are more
+ * that should be added.
+ */
+
+/*
+ * Control module register bit defines - these should eventually go into
+ * their own regbits file.  Some of these will be complicated, depending
+ * on the device type (general-purpose, emulator, test, secure, bad, other)
+ * and the security mode (secure, non-secure, don't care)
+ */
+/* CONTROL_DEVCONF0 bits */
+#define OMAP24XX_USBSTANDBYCTRL         (1 << 15)
+#define OMAP2_MCBSP2_CLKS_MASK          (1 << 6)
+#define OMAP2_MCBSP1_CLKS_MASK          (1 << 2)
+
+/* CONTROL_DEVCONF1 bits */
+#define OMAP2_MCBSP5_CLKS_MASK          (1 << 4) /* > 242x */
+#define OMAP2_MCBSP4_CLKS_MASK          (1 << 2) /* > 242x */
+#define OMAP2_MCBSP3_CLKS_MASK          (1 << 0) /* > 242x */
+
+/* CONTROL_STATUS bits */
+#define OMAP2_DEVICETYPE_MASK           (0x7 << 8)
+#define OMAP2_SYSBOOT_5_MASK            (1 << 5)
+#define OMAP2_SYSBOOT_4_MASK            (1 << 4)
+#define OMAP2_SYSBOOT_3_MASK            (1 << 3)
+#define OMAP2_SYSBOOT_2_MASK            (1 << 2)
+#define OMAP2_SYSBOOT_1_MASK            (1 << 1)
+#define OMAP2_SYSBOOT_0_MASK            (1 << 0)
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+extern void __iomem *omap_ctrl_base_get(void);
+extern u8 omap_ctrl_readb(u16 offset);
+extern u16 omap_ctrl_readw(u16 offset);
+extern u32 omap_ctrl_readl(u16 offset);
+extern void omap_ctrl_writeb(u8 val, u16 offset);
+extern void omap_ctrl_writew(u16 val, u16 offset);
+extern void omap_ctrl_writel(u32 val, u16 offset);
+#else
+#define omap_ctrl_base_get()            0
+#define omap_ctrl_readb(x)              0
+#define omap_ctrl_readw(x)              0
+#define omap_ctrl_readl(x)              0
+#define omap_ctrl_writeb(x, y)          WARN_ON(1)
+#define omap_ctrl_writew(x, y)          WARN_ON(1)
+#define omap_ctrl_writel(x, y)          WARN_ON(1)
+#endif
+#endif  /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_CONTROL_H */
+
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
new file mode 100644
index 000000000000..05aee0eda34f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -0,0 +1,402 @@
+/*
+ * arch/arm/plat-omap/include/mach/cpu.h
+ *
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+struct omap_chip_id {
+        u8 oc;
+};
+
+#define OMAP_CHIP_INIT(x)       { .oc = x }
+
+extern unsigned int system_rev;
+
+#define omap2_cpu_rev()         ((system_rev >> 12) & 0x0f)
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+#  error "OMAP1 and OMAP2 can't be selected at the same time"
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2420
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap3430
+# endif
+#endif
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():    True for OMAP730
+ * cpu_is_omap15xx():   True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx():   True for OMAP1610, OMAP5912 and OMAP1710
+ * cpu_is_omap24xx():   True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x():   True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x():   True for OMAP2430
+ * cpu_is_omap343x():   True for OMAP3430
+ */
+#define GET_OMAP_CLASS  ((system_rev >> 24) & 0xff)
+
+#define IS_OMAP_CLASS(class, id)                        \
+static inline int is_omap ##class (void)                \
+{                                                       \
+        return (GET_OMAP_CLASS == (id)) ? 1 : 0;        \
+}
+
+#define GET_OMAP_SUBCLASS       ((system_rev >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)                  \
+static inline int is_omap ##subclass (void)             \
+{                                                       \
+        return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;     \
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+
+#define cpu_is_omap7xx()                0
+#define cpu_is_omap15xx()               0
+#define cpu_is_omap16xx()               0
+#define cpu_is_omap24xx()               0
+#define cpu_is_omap242x()               0
+#define cpu_is_omap243x()               0
+#define cpu_is_omap34xx()               0
+#define cpu_is_omap343x()               0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()              is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()             is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()             is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()              1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()             1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()             1
+# endif
+#endif
+
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  undef  cpu_is_omap242x
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap24xx()             is_omap24xx()
+#  define cpu_is_omap242x()             is_omap242x()
+#  define cpu_is_omap243x()             is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+#  undef  cpu_is_omap34xx
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap34xx()             is_omap34xx()
+#  define cpu_is_omap343x()             is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()             1
+# endif
+# if defined(CONFIG_ARCH_OMAP2420)
+#  undef  cpu_is_omap242x
+#  define cpu_is_omap242x()             1
+# endif
+# if defined(CONFIG_ARCH_OMAP2430)
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap243x()             1
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+#  undef  cpu_is_omap34xx
+#  define cpu_is_omap34xx()             1
+# endif
+# if defined(CONFIG_ARCH_OMAP3430)
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap343x()             1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap330():    True for OMAP330
+ * cpu_is_omap730():    True for OMAP730
+ * cpu_is_omap1510():   True for OMAP1510
+ * cpu_is_omap1610():   True for OMAP1610
+ * cpu_is_omap1611():   True for OMAP1611
+ * cpu_is_omap5912():   True for OMAP5912
+ * cpu_is_omap1621():   True for OMAP1621
+ * cpu_is_omap1710():   True for OMAP1710
+ * cpu_is_omap2420():   True for OMAP2420
+ * cpu_is_omap2422():   True for OMAP2422
+ * cpu_is_omap2423():   True for OMAP2423
+ * cpu_is_omap2430():   True for OMAP2430
+ * cpu_is_omap3430():   True for OMAP3430
+ */
+#define GET_OMAP_TYPE   ((system_rev >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)                          \
+static inline int is_omap ##type (void)                 \
+{                                                       \
+        return (GET_OMAP_TYPE == (id)) ? 1 : 0;         \
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+
+#define cpu_is_omap310()                0
+#define cpu_is_omap730()                0
+#define cpu_is_omap1510()               0
+#define cpu_is_omap1610()               0
+#define cpu_is_omap5912()               0
+#define cpu_is_omap1611()               0
+#define cpu_is_omap1621()               0
+#define cpu_is_omap1710()               0
+#define cpu_is_omap2420()               0
+#define cpu_is_omap2422()               0
+#define cpu_is_omap2423()               0
+#define cpu_is_omap2430()               0
+#define cpu_is_omap3430()               0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
+#  define cpu_is_omap730()              is_omap730()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
+#  define cpu_is_omap730()              1
+# endif
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 330 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()               is_omap310()
+# define cpu_is_omap1510()              is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
+# define cpu_is_omap1610()              is_omap1610()
+# define cpu_is_omap1611()              is_omap1611()
+# define cpu_is_omap5912()              is_omap5912()
+# define cpu_is_omap1621()              is_omap1621()
+# define cpu_is_omap1710()              is_omap1710()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP24XX)
+# undef  cpu_is_omap2420
+# undef  cpu_is_omap2422
+# undef  cpu_is_omap2423
+# undef  cpu_is_omap2430
+# define cpu_is_omap2420()              is_omap2420()
+# define cpu_is_omap2422()              is_omap2422()
+# define cpu_is_omap2423()              is_omap2423()
+# define cpu_is_omap2430()              is_omap2430()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+# undef cpu_is_omap3430
+# define cpu_is_omap3430()              is_omap3430()
+#endif
+
+/* Macros to detect if we have OMAP1 or OMAP2 */
+#define cpu_class_is_omap1()    (cpu_is_omap730() || cpu_is_omap15xx() || \
+                                cpu_is_omap16xx())
+#define cpu_class_is_omap2()    (cpu_is_omap24xx() || cpu_is_omap34xx())
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+/*
+ * Macros to detect silicon revision of OMAP2/3 processors.
+ * is_sil_rev_greater_than:     true if passed cpu type & its rev is greater.
+ * is_sil_rev_lesser_than:      true if passed cpu type & its rev is lesser.
+ * is_sil_rev_equal_to:         true if passed cpu type & its rev is equal.
+ * get_sil_rev:                 return the silicon rev value.
+ */
+#define get_sil_omap_type(rev)  ((rev & 0xffff0000) >> 16)
+#define get_sil_revision(rev)   ((rev & 0x0000f000) >> 12)
+
+#define is_sil_rev_greater_than(rev) \
+                ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+                (get_sil_revision(system_rev) > get_sil_revision(rev)))
+
+#define is_sil_rev_less_than(rev) \
+                ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+                (get_sil_revision(system_rev) < get_sil_revision(rev)))
+
+#define is_sil_rev_equal_to(rev) \
+                ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+                (get_sil_revision(system_rev) == get_sil_revision(rev)))
+
+#define get_sil_rev() \
+                get_sil_revision(system_rev)
+
+/* Various silicon macros defined here */
+#define OMAP2420_REV_ES1_0      0x24200000
+#define OMAP2420_REV_ES2_0      0x24201000
+#define OMAP2430_REV_ES1_0      0x24300000
+#define OMAP3430_REV_ES1_0      0x34300000
+#define OMAP3430_REV_ES2_0      0x34301000
+#define OMAP3430_REV_ES2_1      0x34302000
+#define OMAP3430_REV_ES2_2      0x34303000
+
+/*
+ * omap_chip bits
+ *
+ * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
+ * valid on all chips of that type.  CHIP_IS_OMAP3430ES{1,2} indicates
+ * something that is only valid on that particular ES revision.
+ *
+ * These bits may be ORed together to indicate structures that are
+ * available on multiple chip types.
+ *
+ * To test whether a particular structure matches the current OMAP chip type,
+ * use omap_chip_is().
+ *
+ */
+#define CHIP_IS_OMAP2420       (1 << 0)
+#define CHIP_IS_OMAP2430       (1 << 1)
+#define CHIP_IS_OMAP3430       (1 << 2)
+#define CHIP_IS_OMAP3430ES1    (1 << 3)
+#define CHIP_IS_OMAP3430ES2    (1 << 4)
+
+#define CHIP_IS_OMAP24XX       (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+int omap_chip_is(struct omap_chip_id oci);
+
+
+/*
+ * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define DEVICE_TYPE_TEST        0
+#define DEVICE_TYPE_EMU         1
+#define DEVICE_TYPE_SEC         2
+#define DEVICE_TYPE_GP          3
+#define DEVICE_TYPE_BAD         4
+
+#define get_device_type()       ((system_rev & 0x700) >> 8)
+#define is_device_type_test()   (get_device_type() == DEVICE_TYPE_TEST)
+#define is_device_type_emu()    (get_device_type() == DEVICE_TYPE_EMU)
+#define is_device_type_sec()    (get_device_type() == DEVICE_TYPE_SEC)
+#define is_device_type_gp()     (get_device_type() == DEVICE_TYPE_GP)
+#define is_device_type_bad()    (get_device_type() == DEVICE_TYPE_BAD)
+
+void omap2_check_revision(void);
+
+#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
new file mode 100644
index 000000000000..1b0039bdeb4e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -0,0 +1,58 @@
+/* arch/arm/plat-omap/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+                .macro  addruart,rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1                 @ MMU enabled?
+#ifdef CONFIG_ARCH_OMAP1
+                moveq   \rx, #0xff000000        @ physical base address
+                movne   \rx, #0xfe000000        @ virtual base
+                orr     \rx, \rx, #0x00fb0000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+                orr     \rx, \rx, #0x00009000   @ UART 3
+#endif
+#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
+                orr     \rx, \rx, #0x00000800   @ UART 2 & 3
+#endif
+
+#elif  CONFIG_ARCH_OMAP2
+                moveq   \rx, #0x48000000        @ physical base address
+                movne   \rx, #0xd8000000        @ virtual base
+                orr     \rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+                add     \rx, \rx, #0x00002000   @ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+                add     \rx, \rx, #0x00004000   @ UART 3
+#endif
+#endif
+                .endm
+
+                .macro  senduart,rd,rx
+                strb    \rd, [\rx]
+                .endm
+
+                .macro  busyuart,rd,rx
+1001:           ldrb    \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends
+                and     \rd, \rd, #0x60
+                teq     \rd, #0x60
+                beq     1002f
+                ldrb    \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only
+                and     \rd, \rd, #0x60
+                teq     \rd, #0x60
+                bne     1001b
+1002:
+                .endm
+
+                .macro  waituart,rd,rx
+                .endm
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
new file mode 100644
index 000000000000..54fe9665b182
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -0,0 +1,570 @@
+/*
+ *  arch/arm/plat-omap/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Hardware registers for omap1 */
+#define OMAP1_DMA_BASE                  (0xfffed800)
+
+#define OMAP1_DMA_GCR                   0x400
+#define OMAP1_DMA_GSCR                  0x404
+#define OMAP1_DMA_GRST                  0x408
+#define OMAP1_DMA_HW_ID                 0x442
+#define OMAP1_DMA_PCH2_ID               0x444
+#define OMAP1_DMA_PCH0_ID               0x446
+#define OMAP1_DMA_PCH1_ID               0x448
+#define OMAP1_DMA_PCHG_ID               0x44a
+#define OMAP1_DMA_PCHD_ID               0x44c
+#define OMAP1_DMA_CAPS_0_U              0x44e
+#define OMAP1_DMA_CAPS_0_L              0x450
+#define OMAP1_DMA_CAPS_1_U              0x452
+#define OMAP1_DMA_CAPS_1_L              0x454
+#define OMAP1_DMA_CAPS_2                0x456
+#define OMAP1_DMA_CAPS_3                0x458
+#define OMAP1_DMA_CAPS_4                0x45a
+#define OMAP1_DMA_PCH2_SR               0x460
+#define OMAP1_DMA_PCH0_SR               0x480
+#define OMAP1_DMA_PCH1_SR               0x482
+#define OMAP1_DMA_PCHD_SR               0x4c0
+
+/* Hardware registers for omap2 and omap3 */
+#define OMAP24XX_DMA4_BASE              (L4_24XX_BASE + 0x56000)
+#define OMAP34XX_DMA4_BASE              (L4_34XX_BASE + 0x56000)
+
+#define OMAP_DMA4_REVISION              0x00
+#define OMAP_DMA4_GCR                   0x78
+#define OMAP_DMA4_IRQSTATUS_L0          0x08
+#define OMAP_DMA4_IRQSTATUS_L1          0x0c
+#define OMAP_DMA4_IRQSTATUS_L2          0x10
+#define OMAP_DMA4_IRQSTATUS_L3          0x14
+#define OMAP_DMA4_IRQENABLE_L0          0x18
+#define OMAP_DMA4_IRQENABLE_L1          0x1c
+#define OMAP_DMA4_IRQENABLE_L2          0x20
+#define OMAP_DMA4_IRQENABLE_L3          0x24
+#define OMAP_DMA4_SYSSTATUS             0x28
+#define OMAP_DMA4_OCP_SYSCONFIG         0x2c
+#define OMAP_DMA4_CAPS_0                0x64
+#define OMAP_DMA4_CAPS_2                0x6c
+#define OMAP_DMA4_CAPS_3                0x70
+#define OMAP_DMA4_CAPS_4                0x74
+
+#define OMAP1_LOGICAL_DMA_CH_COUNT      17
+#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT  32      /* REVISIT: Is this 32 + 2? */
+
+/* Common channel specific registers for omap1 */
+#define OMAP1_DMA_CH_BASE(n)            (0x40 * (n) + 0x00)
+#define OMAP1_DMA_CSDP(n)               (0x40 * (n) + 0x00)
+#define OMAP1_DMA_CCR(n)                (0x40 * (n) + 0x02)
+#define OMAP1_DMA_CICR(n)               (0x40 * (n) + 0x04)
+#define OMAP1_DMA_CSR(n)                (0x40 * (n) + 0x06)
+#define OMAP1_DMA_CEN(n)                (0x40 * (n) + 0x10)
+#define OMAP1_DMA_CFN(n)                (0x40 * (n) + 0x12)
+#define OMAP1_DMA_CSFI(n)               (0x40 * (n) + 0x14)
+#define OMAP1_DMA_CSEI(n)               (0x40 * (n) + 0x16)
+#define OMAP1_DMA_CPC(n)                (0x40 * (n) + 0x18)     /* 15xx only */
+#define OMAP1_DMA_CSAC(n)               (0x40 * (n) + 0x18)
+#define OMAP1_DMA_CDAC(n)               (0x40 * (n) + 0x1a)
+#define OMAP1_DMA_CDEI(n)               (0x40 * (n) + 0x1c)
+#define OMAP1_DMA_CDFI(n)               (0x40 * (n) + 0x1e)
+#define OMAP1_DMA_CLNK_CTRL(n)          (0x40 * (n) + 0x28)
+
+/* Common channel specific registers for omap2 */
+#define OMAP_DMA4_CH_BASE(n)            (0x60 * (n) + 0x80)
+#define OMAP_DMA4_CCR(n)                (0x60 * (n) + 0x80)
+#define OMAP_DMA4_CLNK_CTRL(n)          (0x60 * (n) + 0x84)
+#define OMAP_DMA4_CICR(n)               (0x60 * (n) + 0x88)
+#define OMAP_DMA4_CSR(n)                (0x60 * (n) + 0x8c)
+#define OMAP_DMA4_CSDP(n)               (0x60 * (n) + 0x90)
+#define OMAP_DMA4_CEN(n)                (0x60 * (n) + 0x94)
+#define OMAP_DMA4_CFN(n)                (0x60 * (n) + 0x98)
+#define OMAP_DMA4_CSEI(n)               (0x60 * (n) + 0xa4)
+#define OMAP_DMA4_CSFI(n)               (0x60 * (n) + 0xa8)
+#define OMAP_DMA4_CDEI(n)               (0x60 * (n) + 0xac)
+#define OMAP_DMA4_CDFI(n)               (0x60 * (n) + 0xb0)
+#define OMAP_DMA4_CSAC(n)               (0x60 * (n) + 0xb4)
+#define OMAP_DMA4_CDAC(n)               (0x60 * (n) + 0xb8)
+
+/* Channel specific registers only on omap1 */
+#define OMAP1_DMA_CSSA_L(n)             (0x40 * (n) + 0x08)
+#define OMAP1_DMA_CSSA_U(n)             (0x40 * (n) + 0x0a)
+#define OMAP1_DMA_CDSA_L(n)             (0x40 * (n) + 0x0c)
+#define OMAP1_DMA_CDSA_U(n)             (0x40 * (n) + 0x0e)
+#define OMAP1_DMA_COLOR_L(n)            (0x40 * (n) + 0x20)
+#define OMAP1_DMA_COLOR_U(n)            (0x40 * (n) + 0x22)
+#define OMAP1_DMA_CCR2(n)               (0x40 * (n) + 0x24)
+#define OMAP1_DMA_LCH_CTRL(n)           (0x40 * (n) + 0x2a)     /* not on 15xx */
+#define OMAP1_DMA_CCEN(n)               0
+#define OMAP1_DMA_CCFN(n)               0
+
+/* Channel specific registers only on omap2 */
+#define OMAP_DMA4_CSSA(n)               (0x60 * (n) + 0x9c)
+#define OMAP_DMA4_CDSA(n)               (0x60 * (n) + 0xa0)
+#define OMAP_DMA4_CCEN(n)               (0x60 * (n) + 0xbc)
+#define OMAP_DMA4_CCFN(n)               (0x60 * (n) + 0xc0)
+#define OMAP_DMA4_COLOR(n)              (0x60 * (n) + 0xc4)
+
+/* Dummy defines to keep multi-omap compiles happy */
+#define OMAP1_DMA_REVISION              0
+#define OMAP1_DMA_IRQSTATUS_L0          0
+#define OMAP1_DMA_IRQENABLE_L0          0
+#define OMAP1_DMA_OCP_SYSCONFIG         0
+#define OMAP_DMA4_HW_ID                 0
+#define OMAP_DMA4_CAPS_0_L              0
+#define OMAP_DMA4_CAPS_0_U              0
+#define OMAP_DMA4_CAPS_1_L              0
+#define OMAP_DMA4_CAPS_1_U              0
+#define OMAP_DMA4_GSCR                  0
+#define OMAP_DMA4_CPC(n)                0
+
+#define OMAP_DMA4_LCH_CTRL(n)           0
+#define OMAP_DMA4_COLOR_L(n)            0
+#define OMAP_DMA4_COLOR_U(n)            0
+#define OMAP_DMA4_CCR2(n)               0
+#define OMAP1_DMA_CSSA(n)               0
+#define OMAP1_DMA_CDSA(n)               0
+#define OMAP_DMA4_CSSA_L(n)             0
+#define OMAP_DMA4_CSSA_U(n)             0
+#define OMAP_DMA4_CDSA_L(n)             0
+#define OMAP_DMA4_CDSA_U(n)             0
+
+/*----------------------------------------------------------------------------*/
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE              0
+#define OMAP_DMA_MCSI1_TX               1
+#define OMAP_DMA_MCSI1_RX               2
+#define OMAP_DMA_I2C_RX                 3
+#define OMAP_DMA_I2C_TX                 4
+#define OMAP_DMA_EXT_NDMA_REQ           5
+#define OMAP_DMA_EXT_NDMA_REQ2          6
+#define OMAP_DMA_UWIRE_TX               7
+#define OMAP_DMA_MCBSP1_TX              8
+#define OMAP_DMA_MCBSP1_RX              9
+#define OMAP_DMA_MCBSP3_TX              10
+#define OMAP_DMA_MCBSP3_RX              11
+#define OMAP_DMA_UART1_TX               12
+#define OMAP_DMA_UART1_RX               13
+#define OMAP_DMA_UART2_TX               14
+#define OMAP_DMA_UART2_RX               15
+#define OMAP_DMA_MCBSP2_TX              16
+#define OMAP_DMA_MCBSP2_RX              17
+#define OMAP_DMA_UART3_TX               18
+#define OMAP_DMA_UART3_RX               19
+#define OMAP_DMA_CAMERA_IF_RX           20
+#define OMAP_DMA_MMC_TX                 21
+#define OMAP_DMA_MMC_RX                 22
+#define OMAP_DMA_NAND                   23
+#define OMAP_DMA_IRQ_LCD_LINE           24
+#define OMAP_DMA_MEMORY_STICK           25
+#define OMAP_DMA_USB_W2FC_RX0           26
+#define OMAP_DMA_USB_W2FC_RX1           27
+#define OMAP_DMA_USB_W2FC_RX2           28
+#define OMAP_DMA_USB_W2FC_TX0           29
+#define OMAP_DMA_USB_W2FC_TX1           30
+#define OMAP_DMA_USB_W2FC_TX2           31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN          32
+#define OMAP_DMA_SPI_TX                 33
+#define OMAP_DMA_SPI_RX                 34
+#define OMAP_DMA_CRYPTO_HASH            35
+#define OMAP_DMA_CCP_ATTN               36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY     37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0      38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0      39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1      40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1      41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2      42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2      43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3      44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3      45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4      46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4      47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5      48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5      49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6      50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6      51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7      52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7      53
+#define OMAP_DMA_MMC2_TX                54
+#define OMAP_DMA_MMC2_RX                55
+#define OMAP_DMA_CRYPTO_DES_OUT         56
+
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE          0
+#define OMAP24XX_DMA_XTI_DMA            1       /* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0        2       /* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1        3       /* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC               4       /* S_DMA_3 */
+#define OMAP24XX_DMA_GFX                5       /* S_DMA_4 */
+#define OMAP24XX_DMA_DSS                6       /* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX           7       /* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2        7       /* S_DMA_6 */
+#define OMAP24XX_DMA_CWT                8       /* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX             9       /* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX             10      /* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX             11      /* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX             12      /* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX         13      /* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX         13      /* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2        14      /* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3        15      /* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4        16      /* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD          17      /* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR          18      /* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD       19      /* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR       20      /* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD       21      /* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR       22      /* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD       23      /* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR       24      /* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD       25      /* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR       26      /* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3        14      /* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0           15      /* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0           16      /* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX          17      /* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX          18      /* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX          19      /* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX          20      /* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX          21      /* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX          22      /* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1           23      /* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1           24      /* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4        25      /* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5        26      /* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX            25      /* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX            26      /* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX            27      /* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX            28      /* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX            29      /* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX            30      /* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX          31      /* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX          32      /* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX          33      /* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX          34      /* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0           35      /* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0           36      /* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1           37      /* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1           38      /* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2           39      /* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2           40      /* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3           41      /* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3           42      /* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0           43      /* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0           44      /* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1           45      /* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1           46      /* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX            47      /* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX            48      /* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX           49      /* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX           50      /* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX           51      /* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX           52      /* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX           53      /* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX           54      /* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0       55      /* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0       56      /* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1       57      /* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1       58      /* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2       59      /* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2       60      /* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX            61      /* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX            62      /* S_DMA_61 */
+#define OMAP24XX_DMA_MS                 63      /* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5        64      /* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6        64      /* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3        64      /* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX            65      /* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX            66      /* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX            67      /* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX            68      /* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX         69      /* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0           70      /* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0           71      /* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0               72      /* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1               73      /* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2               74      /* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3               75      /* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX            77      /* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX            78      /* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX            79      /* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX            80      /* S_DMA_79 */
+
+/*----------------------------------------------------------------------------*/
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE           (0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL           (OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L       (OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U       (OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L       (OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U       (OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE           (0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP           (OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR            (OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL           (OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L       (OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U       (OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L       (OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U       (OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L       (OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U       (OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L       (OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U       (OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1      (OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L    (OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1      (OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1      (OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL       (OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U    (OMAP1610_DMA_LCD_BASE + 0xf4)
+
+#define OMAP1_DMA_TOUT_IRQ              (1 << 0)
+#define OMAP_DMA_DROP_IRQ               (1 << 1)
+#define OMAP_DMA_HALF_IRQ               (1 << 2)
+#define OMAP_DMA_FRAME_IRQ              (1 << 3)
+#define OMAP_DMA_LAST_IRQ               (1 << 4)
+#define OMAP_DMA_BLOCK_IRQ              (1 << 5)
+#define OMAP1_DMA_SYNC_IRQ              (1 << 6)
+#define OMAP2_DMA_PKT_IRQ               (1 << 7)
+#define OMAP2_DMA_TRANS_ERR_IRQ         (1 << 8)
+#define OMAP2_DMA_SECURE_ERR_IRQ        (1 << 9)
+#define OMAP2_DMA_SUPERVISOR_ERR_IRQ    (1 << 10)
+#define OMAP2_DMA_MISALIGNED_ERR_IRQ    (1 << 11)
+
+#define OMAP_DMA_DATA_TYPE_S8           0x00
+#define OMAP_DMA_DATA_TYPE_S16          0x01
+#define OMAP_DMA_DATA_TYPE_S32          0x02
+
+#define OMAP_DMA_SYNC_ELEMENT           0x00
+#define OMAP_DMA_SYNC_FRAME             0x01
+#define OMAP_DMA_SYNC_BLOCK             0x02
+#define OMAP_DMA_SYNC_PACKET            0x03
+
+#define OMAP_DMA_SRC_SYNC               0x01
+#define OMAP_DMA_DST_SYNC               0x00
+
+#define OMAP_DMA_PORT_EMIFF             0x00
+#define OMAP_DMA_PORT_EMIFS             0x01
+#define OMAP_DMA_PORT_OCP_T1            0x02
+#define OMAP_DMA_PORT_TIPB              0x03
+#define OMAP_DMA_PORT_OCP_T2            0x04
+#define OMAP_DMA_PORT_MPUI              0x05
+
+#define OMAP_DMA_AMODE_CONSTANT         0x00
+#define OMAP_DMA_AMODE_POST_INC         0x01
+#define OMAP_DMA_AMODE_SINGLE_IDX       0x02
+#define OMAP_DMA_AMODE_DOUBLE_IDX       0x03
+
+#define DMA_DEFAULT_FIFO_DEPTH          0x10
+#define DMA_DEFAULT_ARB_RATE            0x01
+/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
+#define DMA_THREAD_RESERVE_NORM         (0x00 << 12) /* Def */
+#define DMA_THREAD_RESERVE_ONET         (0x01 << 12)
+#define DMA_THREAD_RESERVE_TWOT         (0x02 << 12)
+#define DMA_THREAD_RESERVE_THREET       (0x03 << 12)
+#define DMA_THREAD_FIFO_NONE            (0x00 << 14) /* Def */
+#define DMA_THREAD_FIFO_75              (0x01 << 14)
+#define DMA_THREAD_FIFO_25              (0x02 << 14)
+#define DMA_THREAD_FIFO_50              (0x03 << 14)
+
+/* Chaining modes*/
+#ifndef CONFIG_ARCH_OMAP1
+#define OMAP_DMA_STATIC_CHAIN           0x1
+#define OMAP_DMA_DYNAMIC_CHAIN          0x2
+#define OMAP_DMA_CHAIN_ACTIVE           0x1
+#define OMAP_DMA_CHAIN_INACTIVE         0x0
+#endif
+
+#define DMA_CH_PRIO_HIGH                0x1
+#define DMA_CH_PRIO_LOW                 0x0 /* Def */
+
+/* LCD DMA block numbers */
+enum {
+        OMAP_LCD_DMA_B1_TOP,
+        OMAP_LCD_DMA_B1_BOTTOM,
+        OMAP_LCD_DMA_B2_TOP,
+        OMAP_LCD_DMA_B2_BOTTOM
+};
+
+enum omap_dma_burst_mode {
+        OMAP_DMA_DATA_BURST_DIS = 0,
+        OMAP_DMA_DATA_BURST_4,
+        OMAP_DMA_DATA_BURST_8,
+        OMAP_DMA_DATA_BURST_16,
+};
+
+enum end_type {
+        OMAP_DMA_LITTLE_ENDIAN = 0,
+        OMAP_DMA_BIG_ENDIAN
+};
+
+enum omap_dma_color_mode {
+        OMAP_DMA_COLOR_DIS = 0,
+        OMAP_DMA_CONSTANT_FILL,
+        OMAP_DMA_TRANSPARENT_COPY
+};
+
+enum omap_dma_write_mode {
+        OMAP_DMA_WRITE_NON_POSTED = 0,
+        OMAP_DMA_WRITE_POSTED,
+        OMAP_DMA_WRITE_LAST_NON_POSTED
+};
+
+enum omap_dma_channel_mode {
+        OMAP_DMA_LCH_2D = 0,
+        OMAP_DMA_LCH_G,
+        OMAP_DMA_LCH_P,
+        OMAP_DMA_LCH_PD
+};
+
+struct omap_dma_channel_params {
+        int data_type;          /* data type 8,16,32 */
+        int elem_count;         /* number of elements in a frame */
+        int frame_count;        /* number of frames in a element */
+
+        int src_port;           /* Only on OMAP1 REVISIT: Is this needed? */
+        int src_amode;          /* constant, post increment, indexed,
+                                        double indexed */
+        unsigned long src_start;        /* source address : physical */
+        int src_ei;             /* source element index */
+        int src_fi;             /* source frame index */
+
+        int dst_port;           /* Only on OMAP1 REVISIT: Is this needed? */
+        int dst_amode;          /* constant, post increment, indexed,
+                                        double indexed */
+        unsigned long dst_start;        /* source address : physical */
+        int dst_ei;             /* source element index */
+        int dst_fi;             /* source frame index */
+
+        int trigger;            /* trigger attached if the channel is
+                                        synchronized */
+        int sync_mode;          /* sycn on element, frame , block or packet */
+        int src_or_dst_synch;   /* source synch(1) or destination synch(0) */
+
+        int ie;                 /* interrupt enabled */
+
+        unsigned char read_prio;/* read priority */
+        unsigned char write_prio;/* write priority */
+
+#ifndef CONFIG_ARCH_OMAP1
+        enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
+#endif
+};
+
+
+extern void omap_set_dma_priority(int lch, int dst_port, int priority);
+extern int omap_request_dma(int dev_id, const char *dev_name,
+                        void (*callback)(int lch, u16 ch_status, void *data),
+                        void *data, int *dma_ch);
+extern void omap_enable_dma_irq(int ch, u16 irq_bits);
+extern void omap_disable_dma_irq(int ch, u16 irq_bits);
+extern void omap_free_dma(int ch);
+extern void omap_start_dma(int lch);
+extern void omap_stop_dma(int lch);
+extern void omap_set_dma_transfer_params(int lch, int data_type,
+                                         int elem_count, int frame_count,
+                                         int sync_mode,
+                                         int dma_trigger, int src_or_dst_synch);
+extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
+                                    u32 color);
+extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
+extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
+
+extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+                                    unsigned long src_start,
+                                    int src_ei, int src_fi);
+extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_src_data_pack(int lch, int enable);
+extern void omap_set_dma_src_burst_mode(int lch,
+                                        enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+                                     unsigned long dest_start,
+                                     int dst_ei, int dst_fi);
+extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_dest_data_pack(int lch, int enable);
+extern void omap_set_dma_dest_burst_mode(int lch,
+                                         enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_params(int lch,
+                                struct omap_dma_channel_params *params);
+
+extern void omap_dma_link_lch(int lch_head, int lch_queue);
+extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
+
+extern int omap_set_dma_callback(int lch,
+                        void (*callback)(int lch, u16 ch_status, void *data),
+                        void *data);
+extern dma_addr_t omap_get_dma_src_pos(int lch);
+extern dma_addr_t omap_get_dma_dst_pos(int lch);
+extern void omap_clear_dma(int lch);
+extern int omap_get_dma_active_status(int lch);
+extern int omap_dma_running(void);
+extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
+                                       int tparams);
+extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
+                                 unsigned char write_prio);
+extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
+extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
+extern int omap_get_dma_index(int lch, int *ei, int *fi);
+
+/* Chaining APIs */
+#ifndef CONFIG_ARCH_OMAP1
+extern int omap_request_dma_chain(int dev_id, const char *dev_name,
+                                  void (*callback) (int chain_id, u16 ch_status,
+                                                    void *data),
+                                  int *chain_id, int no_of_chans,
+                                  int chain_mode,
+                                  struct omap_dma_channel_params params);
+extern int omap_free_dma_chain(int chain_id);
+extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
+                                     int dest_start, int elem_count,
+                                     int frame_count, void *callbk_data);
+extern int omap_start_dma_chain_transfers(int chain_id);
+extern int omap_stop_dma_chain_transfers(int chain_id);
+extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
+extern int omap_get_dma_chain_dst_pos(int chain_id);
+extern int omap_get_dma_chain_src_pos(int chain_id);
+
+extern int omap_modify_dma_chain_params(int chain_id,
+                                        struct omap_dma_channel_params params);
+extern int omap_dma_chain_status(int chain_id);
+#endif
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+                                void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+                                int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h
new file mode 100644
index 000000000000..6dc703138210
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dmtimer.h
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/plat-omap/include/mach/dmtimer.h
+ *
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * PWM and clock framwork support by Timo Teras.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_DMTIMER_H
+#define __ASM_ARCH_DMTIMER_H
+
+/* clock sources */
+#define OMAP_TIMER_SRC_SYS_CLK                  0x00
+#define OMAP_TIMER_SRC_32_KHZ                   0x01
+#define OMAP_TIMER_SRC_EXT_CLK                  0x02
+
+/* timer interrupt enable bits */
+#define OMAP_TIMER_INT_CAPTURE                  (1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW                 (1 << 1)
+#define OMAP_TIMER_INT_MATCH                    (1 << 0)
+
+/* trigger types */
+#define OMAP_TIMER_TRIGGER_NONE                 0x00
+#define OMAP_TIMER_TRIGGER_OVERFLOW             0x01
+#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02
+
+struct omap_dm_timer;
+struct clk;
+
+int omap_dm_timer_init(void);
+
+struct omap_dm_timer *omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
+void omap_dm_timer_free(struct omap_dm_timer *timer);
+void omap_dm_timer_enable(struct omap_dm_timer *timer);
+void omap_dm_timer_disable(struct omap_dm_timer *timer);
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
+
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
+
+void omap_dm_timer_trigger(struct omap_dm_timer *timer);
+void omap_dm_timer_start(struct omap_dm_timer *timer);
+void omap_dm_timer_stop(struct omap_dm_timer *timer);
+
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
+void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
+void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
+
+int omap_dm_timers_active(void);
+
+
+#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/arch/arm/plat-omap/include/mach/dsp_common.h b/arch/arm/plat-omap/include/mach/dsp_common.h
new file mode 100644
index 000000000000..da97736f3efa
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dsp_common.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1)
+ *
+ * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved.
+ *
+ * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef ASM_ARCH_DSP_COMMON_H
+#define ASM_ARCH_DSP_COMMON_H
+
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK)
+extern void omap_dsp_request_mpui(void);
+extern void omap_dsp_release_mpui(void);
+extern int omap_dsp_request_mem(void);
+extern int omap_dsp_release_mem(void);
+#else
+static inline int omap_dsp_request_mem(void)
+{
+        return 0;
+}
+#define omap_dsp_release_mem()  do {} while (0)
+#endif
+
+#endif /* ASM_ARCH_DSP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h
new file mode 100644
index 000000000000..9e62cf030270
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/eac.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/plat-omap/include/mach2/eac.h
+ *
+ * Defines for Enhanced Audio Controller
+ *
+ * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
+#define __ASM_ARM_ARCH_OMAP2_EAC_H
+
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <sound/core.h>
+
+/* master codec clock source */
+#define EAC_MCLK_EXT_MASK       0x100
+enum eac_mclk_src {
+        EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
+        EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
+        EAC_MCLK_EXT_12288000,
+        EAC_MCLK_EXT_2x11289600,
+        EAC_MCLK_EXT_2x12288000,
+};
+
+/* codec port interface mode */
+enum eac_codec_mode {
+        EAC_CODEC_PCM,
+        EAC_CODEC_AC97,
+        EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
+        EAC_CODEC_I2S_SLAVE,
+};
+
+/* configuration structure for I2S mode */
+struct eac_i2s_conf {
+        /* if enabled, then first data slot (left channel) is signaled as
+         * positive level of frame sync EAC.AC_FS */
+        unsigned        polarity_changed_mode:1;
+        /* if enabled, then serial data starts one clock cycle after the
+         * of EAC.AC_FS for first audio slot */
+        unsigned        sync_delay_enable:1;
+};
+
+/* configuration structure for EAC codec port */
+struct eac_codec {
+        enum eac_mclk_src       mclk_src;
+
+        enum eac_codec_mode     codec_mode;
+        union {
+                struct eac_i2s_conf     i2s;
+        } codec_conf;
+
+        int             default_rate; /* audio sampling rate */
+
+        int             (* set_power)(void *private_data, int dac, int adc);
+        int             (* register_controls)(void *private_data,
+                                              struct snd_card *card);
+        const char      *short_name;
+
+        void            *private_data;
+};
+
+/* structure for passing platform dependent data to the EAC driver */
+struct eac_platform_data {
+        int     (* init)(struct device *eac_dev);
+        void    (* cleanup)(struct device *eac_dev);
+        /* these callbacks are used to configure & control external MCLK
+         * source. NULL if not used */
+        int     (* enable_ext_clocks)(struct device *eac_dev);
+        void    (* disable_ext_clocks)(struct device *eac_dev);
+};
+
+extern void omap_init_eac(struct eac_platform_data *pdata);
+
+extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
+extern void eac_unregister_codec(struct device *eac_dev);
+
+extern int eac_set_mode(struct device *eac_dev, int play, int rec);
+
+#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
new file mode 100644
index 000000000000..d4e9043bf201
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/plat-omap/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+#if defined(CONFIG_ARCH_OMAP730) && \
+        (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP730 doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730)
+#define INT_IH2_IRQ             INT_730_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ             INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ             INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ             INT_1510_IH2_IRQ
+#endif
+
+                .macro  disable_fiq
+                .endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
+
+                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+                ldr     \base, =IO_ADDRESS(OMAP_IH1_BASE)
+                ldr     \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
+                ldr     \tmp, [\base, #IRQ_MIR_REG_OFFSET]
+                mov     \irqstat, #0xffffffff
+                bic     \tmp, \irqstat, \tmp
+                tst     \irqnr, \tmp
+                beq     1510f
+
+                ldr     \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+                cmp     \irqnr, #0
+                ldreq   \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+                cmpeq   \irqnr, #INT_IH2_IRQ
+                ldreq   \base, =IO_ADDRESS(OMAP_IH2_BASE)
+                ldreq   \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+                addeqs  \irqnr, \irqnr, #32
+1510:
+                .endm
+
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#include <mach/omap24xx.h>
+
+                .macro  disable_fiq
+                .endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
+
+                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+                ldr     \base, =OMAP2_VA_IC_BASE
+                ldr     \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
+                cmp     \irqnr, #0x0
+                bne     2222f
+                ldr     \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
+                cmp     \irqnr, #0x0
+                bne     2222f
+                ldr     \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
+                cmp     \irqnr, #0x0
+2222:
+                ldrne   \irqnr, [\base, #IRQ_SIR_IRQ]
+
+                .endm
+
+                .macro  irq_prio_table
+                .endm
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h
new file mode 100644
index 000000000000..c92e4b42b289
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/fpga.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/plat-omap/include/mach/fpga.h
+ *
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
+extern void omap1510_fpga_init_irq(void);
+#else
+#define omap1510_fpga_init_irq()        (0)
+#endif
+
+#define fpga_read(reg)                  __raw_readb(reg)
+#define fpga_write(val, reg)            __raw_writeb(val, reg)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE              0xE8000000      /* VA */
+#define H2P2_DBG_FPGA_SIZE              SZ_4K           /* SIZE */
+#define H2P2_DBG_FPGA_START             0x04000000      /* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START        (H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV          (H2P2_DBG_FPGA_BASE + 0x10)     /* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV         (H2P2_DBG_FPGA_BASE + 0x12)     /* Board Revision */
+#define H2P2_DBG_FPGA_GPIO              (H2P2_DBG_FPGA_BASE + 0x14)     /* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS              (H2P2_DBG_FPGA_BASE + 0x16)     /* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS       (H2P2_DBG_FPGA_BASE + 0x18)     /* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS        (H2P2_DBG_FPGA_BASE + 0x1A)     /* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET         (H2P2_DBG_FPGA_BASE + 0x1C)     /* LAN Reset line */
+
+/* NOTE:  most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+        /* offset 0x00 */
+        u16             smc91x[8];
+        /* offset 0x10 */
+        u16             fpga_rev;
+        u16             board_rev;
+        u16             gpio_outputs;
+        u16             leds;
+        /* offset 0x18 */
+        u16             misc_inputs;
+        u16             lan_status;
+        u16             lan_reset;
+        u16             reserved0;
+        /* offset 0x20 */
+        u16             ps2_data;
+        u16             ps2_ctrl;
+        /* plus also 4 rs232 ports ... */
+};
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN         (1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER         (1 << 14)
+#define H2P2_DBG_FPGA_LED_RED           (1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE          (1 << 12)
+/*  cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER        (1 << 0)        // A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE   11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK   ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER              (1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE               (1 << 1)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE                      0xE8000000      /* Virtual */
+#define OMAP1510_FPGA_SIZE                      SZ_4K
+#define OMAP1510_FPGA_START                     0x08000000      /* Physical */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW                   (OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH                  (OMAP1510_FPGA_BASE + 0x1)
+
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL         (OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT                 (OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI                  (OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER                     (OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO                    (OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI                    (OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO                    (OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI                    (OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET                (OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST                       (OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO                     (OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP                       (OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO                   (OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1                     (OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2                     (OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS           (OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV                 (OMAP1510_FPGA_BASE + 0x18)
+#define OMAP1510P1_PPT_DATA                     (OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS                   (OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL                  (OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN               (OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO                     (OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO            (OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI            (OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO               (OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI               (OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO               (OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI               (OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL          (OMAP1510_FPGA_BASE + 0x20c)
+#define INNOVATOR_FPGA_EXP_CONTROL              (OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2                     (OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2                     (OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START                (OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE               0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0                (1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN               (1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN               (1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0               (1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1               (1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK             (1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK              (1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0            (1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK  (1<<0)  /* output */
+#define OMAP1510_FPGA_HID_MOSI  (1<<1)  /* output */
+#define OMAP1510_FPGA_HID_nSS   (1<<2)  /* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS (1<<3)  /* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO  (1<<4)  /* input */
+#define OMAP1510_FPGA_HID_ATN   (1<<5)  /* input  0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd (1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA               (IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN           (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK           (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2              (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3              (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4              (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5              (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6              (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7              (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8              (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9              (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10             (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11             (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12             (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER              (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1          (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2          (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS            (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17             (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM           (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A         (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B         (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD            (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22             (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23             (OMAP_FPGA_IRQ_BASE + 23)
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/gpio-switch.h b/arch/arm/plat-omap/include/mach/gpio-switch.h
new file mode 100644
index 000000000000..10da0e07c0cf
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpio-switch.h
@@ -0,0 +1,54 @@
+/*
+ * GPIO switch definitions
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H
+#define __ASM_ARCH_OMAP_GPIO_SWITCH_H
+
+#include <linux/types.h>
+
+/* Cover:
+ *      high -> closed
+ *      low  -> open
+ * Connection:
+ *      high -> connected
+ *      low  -> disconnected
+ * Activity:
+ *      high -> active
+ *      low  -> inactive
+ *
+ */
+#define OMAP_GPIO_SWITCH_TYPE_COVER             0x0000
+#define OMAP_GPIO_SWITCH_TYPE_CONNECTION        0x0001
+#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY          0x0002
+#define OMAP_GPIO_SWITCH_FLAG_INVERTED          0x0001
+#define OMAP_GPIO_SWITCH_FLAG_OUTPUT            0x0002
+
+struct omap_gpio_switch {
+        const char *name;
+        s16 gpio;
+        unsigned flags:4;
+        unsigned type:4;
+
+        /* Time in ms to debounce when transitioning from
+         * inactive state to active state. */
+        u16 debounce_rising;
+        /* Same for transition from active to inactive state. */
+        u16 debounce_falling;
+
+        /* notify board-specific code about state changes */
+        void (* notify)(void *data, int state);
+        void *notify_data;
+};
+
+/* Call at init time only */
+extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
+                                        int count);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
new file mode 100644
index 000000000000..94ce2780e8ee
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpio.h
+ *
+ * OMAP GPIO handling defines and functions
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_H
+#define __ASM_ARCH_OMAP_GPIO_H
+
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+#define OMAP_MPUIO_BASE                 (void __iomem *)0xfffb5000
+
+#ifdef CONFIG_ARCH_OMAP730
+#define OMAP_MPUIO_INPUT_LATCH          0x00
+#define OMAP_MPUIO_OUTPUT               0x02
+#define OMAP_MPUIO_IO_CNTL              0x04
+#define OMAP_MPUIO_KBR_LATCH            0x08
+#define OMAP_MPUIO_KBC                  0x0a
+#define OMAP_MPUIO_GPIO_EVENT_MODE      0x0c
+#define OMAP_MPUIO_GPIO_INT_EDGE        0x0e
+#define OMAP_MPUIO_KBD_INT              0x10
+#define OMAP_MPUIO_GPIO_INT             0x12
+#define OMAP_MPUIO_KBD_MASKIT           0x14
+#define OMAP_MPUIO_GPIO_MASKIT          0x16
+#define OMAP_MPUIO_GPIO_DEBOUNCING      0x18
+#define OMAP_MPUIO_LATCH                0x1a
+#else
+#define OMAP_MPUIO_INPUT_LATCH          0x00
+#define OMAP_MPUIO_OUTPUT               0x04
+#define OMAP_MPUIO_IO_CNTL              0x08
+#define OMAP_MPUIO_KBR_LATCH            0x10
+#define OMAP_MPUIO_KBC                  0x14
+#define OMAP_MPUIO_GPIO_EVENT_MODE      0x18
+#define OMAP_MPUIO_GPIO_INT_EDGE        0x1c
+#define OMAP_MPUIO_KBD_INT              0x20
+#define OMAP_MPUIO_GPIO_INT             0x24
+#define OMAP_MPUIO_KBD_MASKIT           0x28
+#define OMAP_MPUIO_GPIO_MASKIT          0x2c
+#define OMAP_MPUIO_GPIO_DEBOUNCING      0x30
+#define OMAP_MPUIO_LATCH                0x34
+#endif
+
+#define OMAP34XX_NR_GPIOS               6
+
+#define OMAP_MPUIO(nr)          (OMAP_MAX_GPIO_LINES + (nr))
+#define OMAP_GPIO_IS_MPUIO(nr)  ((nr) >= OMAP_MAX_GPIO_LINES)
+
+#define OMAP_GPIO_IRQ(nr)       (OMAP_GPIO_IS_MPUIO(nr) ? \
+                                 IH_MPUIO_BASE + ((nr) & 0x0f) : \
+                                 IH_GPIO_BASE + (nr))
+
+extern int omap_gpio_init(void);        /* Call from board init only */
+extern int omap_request_gpio(int gpio);
+extern void omap_free_gpio(int gpio);
+extern void omap_set_gpio_direction(int gpio, int is_input);
+extern void omap_set_gpio_dataout(int gpio, int enable);
+extern int omap_get_gpio_datain(int gpio);
+extern void omap_set_gpio_debounce(int gpio, int enable);
+extern void omap_set_gpio_debounce_time(int gpio, int enable);
+
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls, using the new infrastructure
+ * which lets us plug in FPGA, I2C, and other implementations.
+ * *
+ * The original OMAP-specfic calls should eventually be removed.
+ */
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+        return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+        __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+        return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+        if (gpio < (OMAP_MAX_GPIO_LINES + 16))
+                return OMAP_GPIO_IRQ(gpio);
+        return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+        if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
+                return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
+        return irq - IH_GPIO_BASE;
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h
new file mode 100644
index 000000000000..90444a0d6b1a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpioexpander.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpioexpander.h
+ *
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
+#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
+
+/* Function Prototypes for GPIO Expander functions */
+
+#ifdef CONFIG_GPIOEXPANDER_OMAP
+int read_gpio_expa(u8 *, int);
+int write_gpio_expa(u8 , int);
+#else
+static inline int read_gpio_expa(u8 *val, int addr)
+{
+        return 0;
+}
+static inline int write_gpio_expa(u8 val, int addr)
+{
+        return 0;
+}
+#endif
+
+#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
new file mode 100644
index 000000000000..6a8e07ffc2d0
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -0,0 +1,96 @@
+/*
+ * General-Purpose Memory Controller for OMAP2
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_GPMC_H
+#define __OMAP2_GPMC_H
+
+#define GPMC_CS_CONFIG1         0x00
+#define GPMC_CS_CONFIG2         0x04
+#define GPMC_CS_CONFIG3         0x08
+#define GPMC_CS_CONFIG4         0x0c
+#define GPMC_CS_CONFIG5         0x10
+#define GPMC_CS_CONFIG6         0x14
+#define GPMC_CS_CONFIG7         0x18
+#define GPMC_CS_NAND_COMMAND    0x1c
+#define GPMC_CS_NAND_ADDRESS    0x20
+#define GPMC_CS_NAND_DATA       0x24
+
+#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
+#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
+#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
+#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
+#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
+#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
+#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
+#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
+#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
+#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
+#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
+#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
+#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(1)
+#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
+#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
+#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
+#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
+#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
+#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
+
+/*
+ * Note that all values in this struct are in nanoseconds, while
+ * the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+        /* Minimum clock period for synchronous mode */
+        u16 sync_clk;
+
+        /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+        u16 cs_on;              /* Assertion time */
+        u16 cs_rd_off;          /* Read deassertion time */
+        u16 cs_wr_off;          /* Write deassertion time */
+
+        /* ADV signal timings corresponding to GPMC_CONFIG3 */
+        u16 adv_on;             /* Assertion time */
+        u16 adv_rd_off;         /* Read deassertion time */
+        u16 adv_wr_off;         /* Write deassertion time */
+
+        /* WE signals timings corresponding to GPMC_CONFIG4 */
+        u16 we_on;              /* WE assertion time */
+        u16 we_off;             /* WE deassertion time */
+
+        /* OE signals timings corresponding to GPMC_CONFIG4 */
+        u16 oe_on;              /* OE assertion time */
+        u16 oe_off;             /* OE deassertion time */
+
+        /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+        u16 page_burst_access;  /* Multiple access word delay */
+        u16 access;             /* Start-cycle to first data valid delay */
+        u16 rd_cycle;           /* Total read cycle time */
+        u16 wr_cycle;           /* Total write cycle time */
+};
+
+extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
+extern unsigned long gpmc_get_fclk_period(void);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern u32 gpmc_cs_read_reg(int cs, int idx);
+extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
+extern void gpmc_cs_free(int cs);
+extern int gpmc_cs_set_reserved(int cs, int reserved);
+extern int gpmc_cs_reserved(int cs);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
new file mode 100644
index 000000000000..07f5d7f21528
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -0,0 +1,355 @@
+/*
+ * arch/arm/plat-omap/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *       file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <mach/cpu.h>
+#endif
+#include <mach/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *       files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE    (0xfffec500)
+#define OMAP_MPU_TIMER2_BASE    (0xfffec600)
+#define OMAP_MPU_TIMER3_BASE    (0xfffec700)
+#define MPU_TIMER_FREE          (1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE  (1 << 5)
+#define MPU_TIMER_AR            (1 << 1)
+#define MPU_TIMER_ST            (1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE         (0xfffece00)
+#define ARM_CKCTL               (CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1             (CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2             (CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT              (CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1              (CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2              (CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST               (CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3             (CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF                1
+#define CK_IDLEF                2
+#define CK_ENABLEF              4
+#define CK_SELECTF              8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL                (0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     (0xe1008000)
+#define DSP_CKCTL               (DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1             (DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2             (DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2              (DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE           (0xfffe0800)
+#define ULPD_IT_STATUS          (ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3        (ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL         (ULPD_REG_BASE + 0x30)
+#       define DIS_USB_PVCI_CLK         (1 << 5)        /* no USB/FAC synch */
+#       define USB_MCLK_EN              (1 << 4)        /* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ           (ULPD_REG_BASE + 0x34)
+#       define SOFT_UDC_REQ             (1 << 4)
+#       define SOFT_USB_CLK_REQ         (1 << 3)
+#       define SOFT_DPLL_REQ            (1 << 0)
+#define ULPD_DPLL_CTRL          (ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ         (ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL          (ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL         (ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG       (ULPD_REG_BASE + 0x68)
+#       define DIS_MMC2_DPLL_REQ        (1 << 11)
+#       define DIS_MMC1_DPLL_REQ        (1 << 10)
+#       define DIS_UART3_DPLL_REQ       (1 << 9)
+#       define DIS_UART2_DPLL_REQ       (1 << 8)
+#       define DIS_UART1_DPLL_REQ       (1 << 7)
+#       define DIS_USB_HOST_DPLL_REQ    (1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL       (ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL       (ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE  (0xfffec800)
+#define OMAP_WDT_TIMER          (OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM       (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM       (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE     (OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE           0xfffecb00
+#define OMAP_IH2_BASE           0xfffe0000
+
+#define OMAP_IH1_ITR            (OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR            (OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ        (OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ        (OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL        (OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0           (OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR            (OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR            (OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR            (OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ        (OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ        (OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL        (OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0           (OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR            (OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET      0x00
+#define IRQ_MIR_REG_OFFSET      0x04
+#define IRQ_SIR_IRQ_REG_OFFSET  0x10
+#define IRQ_SIR_FIQ_REG_OFFSET  0x14
+#define IRQ_CONTROL_REG_OFFSET  0x18
+#define IRQ_ISR_REG_OFFSET      0x9c
+#define IRQ_ILR0_REG_OFFSET     0x1c
+#define IRQ_GMR_REG_OFFSET      0xa0
+
+#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0         0xfffe1080
+#define MOD_CONF_CTRL_1         0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0         0xfffe1000
+#define FUNC_MUX_CTRL_1         0xfffe1004
+#define FUNC_MUX_CTRL_2         0xfffe1008
+#define COMP_MODE_CTRL_0        0xfffe100c
+#define FUNC_MUX_CTRL_3         0xfffe1010
+#define FUNC_MUX_CTRL_4         0xfffe1014
+#define FUNC_MUX_CTRL_5         0xfffe1018
+#define FUNC_MUX_CTRL_6         0xfffe101C
+#define FUNC_MUX_CTRL_7         0xfffe1020
+#define FUNC_MUX_CTRL_8         0xfffe1024
+#define FUNC_MUX_CTRL_9         0xfffe1028
+#define FUNC_MUX_CTRL_A         0xfffe102C
+#define FUNC_MUX_CTRL_B         0xfffe1030
+#define FUNC_MUX_CTRL_C         0xfffe1034
+#define FUNC_MUX_CTRL_D         0xfffe1038
+#define PULL_DWN_CTRL_0         0xfffe1040
+#define PULL_DWN_CTRL_1         0xfffe1044
+#define PULL_DWN_CTRL_2         0xfffe1048
+#define PULL_DWN_CTRL_3         0xfffe104c
+#define PULL_DWN_CTRL_4         0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E         0xfffe1090
+#define FUNC_MUX_CTRL_F         0xfffe1094
+#define FUNC_MUX_CTRL_10        0xfffe1098
+#define FUNC_MUX_CTRL_11        0xfffe109c
+#define FUNC_MUX_CTRL_12        0xfffe10a0
+#define PU_PD_SEL_0             0xfffe10b4
+#define PU_PD_SEL_1             0xfffe10b8
+#define PU_PD_SEL_2             0xfffe10bc
+#define PU_PD_SEL_3             0xfffe10c0
+#define PU_PD_SEL_4             0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE      0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE           0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL            (TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE          0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL           (TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE                       (0xfffec900)
+#define MPUI_CTRL                       (MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR                 (MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA                 (MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG                 (MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG                 (MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS                 (MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG            (MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG             (MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE                  0xfffbd000
+#define OMAP_LPG2_BASE                  0xfffbd800
+#define OMAP_LPG1_LCR                   (OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR                   (OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR                   (OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR                   (OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE                   0xfffb5800
+#define OMAP_PWL_ENABLE                 (OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE             (OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap730.h"
+#include "omap1510.h"
+#include "omap24xx.h"
+#include "omap16xx.h"
+#include "omap34xx.h"
+
+#ifndef __ASSEMBLER__
+
+/*
+ * ---------------------------------------------------------------------------
+ * Board specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#include "board-innovator.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H2
+#include "board-h2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#include "board-perseus2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_FSAMPLE
+#include "board-fsample.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H3
+#include "board-h3.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H4
+#include "board-h4.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_2430SDP
+#include "board-2430sdp.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_APOLLON
+#include "board-apollon.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_OSK
+#include "board-osk.h"
+#endif
+
+#ifdef CONFIG_MACH_VOICEBLUE
+#include "board-voiceblue.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+#include "board-palmte.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMZ71
+#include "board-palmz71.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMTT
+#include "board-palmtt.h"
+#endif
+
+#ifdef CONFIG_MACH_SX1
+#include "board-sx1.h"
+#endif
+
+#endif /* !__ASSEMBLER__ */
+
+#endif  /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
new file mode 100644
index 000000000000..577f492f2d3c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
@@ -0,0 +1,12 @@
+#ifndef _HWA742_H
+#define _HWA742_H
+
+struct hwa742_platform_data {
+        void            (*power_up)(struct device *dev);
+        void            (*power_down)(struct device *dev);
+        unsigned long   (*get_clock_rate)(struct device *dev);
+
+        unsigned        te_connected:1;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
new file mode 100644
index 000000000000..2a30b7d88cde
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/plat-omap/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997  RMK     Created.
+ *  07-04-1999  RMK     Major cleanup
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)                 ((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a)            (a)
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define PCIO_BASE       0
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+#define IO_PHYS         0xFFFB0000
+#define IO_OFFSET       0x01000000      /* Virtual IO = 0xfefb0000 */
+#define IO_SIZE         0x40000
+#define IO_VIRT         (IO_PHYS - IO_OFFSET)
+#define IO_ADDRESS(pa)  ((pa) - IO_OFFSET)
+#define OMAP1_IO_ADDRESS(pa)    ((pa) - IO_OFFSET)
+#define io_p2v(pa)      ((pa) - IO_OFFSET)
+#define io_v2p(va)      ((va) + IO_OFFSET)
+
+#elif defined(CONFIG_ARCH_OMAP2)
+
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS    L3_24XX_BASE    /* 0x68000000 */
+#define L3_24XX_VIRT    0xf8000000
+#define L3_24XX_SIZE    SZ_1M           /* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS    L4_24XX_BASE    /* 0x48000000 */
+#define L4_24XX_VIRT    0xd8000000
+#define L4_24XX_SIZE    SZ_1M           /* 1MB of 128MB used, want 1MB sect */
+
+#ifdef CONFIG_ARCH_OMAP2430
+#define L4_WK_243X_PHYS         L4_WK_243X_BASE         /* 0x49000000 */
+#define L4_WK_243X_VIRT         0xd9000000
+#define L4_WK_243X_SIZE         SZ_1M
+#define OMAP243X_GPMC_PHYS      OMAP243X_GPMC_BASE      /* 0x49000000 */
+#define OMAP243X_GPMC_VIRT      0xFE000000
+#define OMAP243X_GPMC_SIZE      SZ_1M
+#define OMAP243X_SDRC_PHYS      OMAP243X_SDRC_BASE
+#define OMAP243X_SDRC_VIRT      0xFD000000
+#define OMAP243X_SDRC_SIZE      SZ_1M
+#define OMAP243X_SMS_PHYS       OMAP243X_SMS_BASE
+#define OMAP243X_SMS_VIRT       0xFC000000
+#define OMAP243X_SMS_SIZE       SZ_1M
+
+#endif
+
+#define IO_OFFSET       0x90000000
+#define IO_ADDRESS(pa)  ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa)    ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
+#define io_p2v(pa)      ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
+#define io_v2p(va)      ((va) - IO_OFFSET)      /* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_24XX_PHYS       OMAP2420_DSP_MEM_BASE   /* 0x58000000 */
+#define DSP_MEM_24XX_VIRT       0xe0000000
+#define DSP_MEM_24XX_SIZE       0x28000
+#define DSP_IPI_24XX_PHYS       OMAP2420_DSP_IPI_BASE   /* 0x59000000 */
+#define DSP_IPI_24XX_VIRT       0xe1000000
+#define DSP_IPI_24XX_SIZE       SZ_4K
+#define DSP_MMU_24XX_PHYS       OMAP2420_DSP_MMU_BASE   /* 0x5a000000 */
+#define DSP_MMU_24XX_VIRT       0xe2000000
+#define DSP_MMU_24XX_SIZE       SZ_4K
+
+#elif defined(CONFIG_ARCH_OMAP3)
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS            L3_34XX_BASE    /* 0x68000000 */
+#define L3_34XX_VIRT            0xf8000000
+#define L3_34XX_SIZE            SZ_1M   /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS            L4_34XX_BASE    /* 0x48000000 */
+#define L4_34XX_VIRT            0xd8000000
+#define L4_34XX_SIZE            SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_WK_34XX_PHYS         L4_WK_34XX_BASE /* 0x48300000 */
+#define L4_WK_34XX_VIRT         0xd8300000
+#define L4_WK_34XX_SIZE         SZ_1M
+
+#define L4_PER_34XX_PHYS        L4_PER_34XX_BASE /* 0x49000000 */
+#define L4_PER_34XX_VIRT        0xd9000000
+#define L4_PER_34XX_SIZE        SZ_1M
+
+#define L4_EMU_34XX_PHYS        L4_EMU_34XX_BASE /* 0x54000000 */
+#define L4_EMU_34XX_VIRT        0xe4000000
+#define L4_EMU_34XX_SIZE        SZ_64M
+
+#define OMAP34XX_GPMC_PHYS      OMAP34XX_GPMC_BASE /* 0x6E000000 */
+#define OMAP34XX_GPMC_VIRT      0xFE000000
+#define OMAP34XX_GPMC_SIZE      SZ_1M
+
+#define OMAP343X_SMS_PHYS       OMAP343X_SMS_BASE /* 0x6C000000 */
+#define OMAP343X_SMS_VIRT       0xFC000000
+#define OMAP343X_SMS_SIZE       SZ_1M
+
+#define OMAP343X_SDRC_PHYS      OMAP343X_SDRC_BASE /* 0x6D000000 */
+#define OMAP343X_SDRC_VIRT      0xFD000000
+#define OMAP343X_SDRC_SIZE      SZ_1M
+
+
+#define IO_OFFSET               0x90000000
+#define IO_ADDRESS(pa)          ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa)    ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_p2v(pa)              ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)              ((va) - IO_OFFSET)/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_34XX_PHYS       OMAP34XX_DSP_MEM_BASE   /* 0x58000000 */
+#define DSP_MEM_34XX_VIRT       0xe0000000
+#define DSP_MEM_34XX_SIZE       0x28000
+#define DSP_IPI_34XX_PHYS       OMAP34XX_DSP_IPI_BASE   /* 0x59000000 */
+#define DSP_IPI_34XX_VIRT       0xe1000000
+#define DSP_IPI_34XX_SIZE       SZ_4K
+#define DSP_MMU_34XX_PHYS       OMAP34XX_DSP_MMU_BASE   /* 0x5a000000 */
+#define DSP_MMU_34XX_VIRT       0xe2000000
+#define DSP_MMU_34XX_SIZE       SZ_4K
+
+#endif
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Functions to access the OMAP IO region
+ *
+ * NOTE: - Use omap_read/write[bwl] for physical register addresses
+ *       - Use __raw_read/write[bwl]() for virtual register addresses
+ *       - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
+ *       - DO NOT use hardcoded virtual addresses to allow changing the
+ *         IO address space again if needed
+ */
+#define omap_readb(a)           (*(volatile unsigned char  *)IO_ADDRESS(a))
+#define omap_readw(a)           (*(volatile unsigned short *)IO_ADDRESS(a))
+#define omap_readl(a)           (*(volatile unsigned int   *)IO_ADDRESS(a))
+
+#define omap_writeb(v,a)        (*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
+#define omap_writew(v,a)        (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
+#define omap_writel(v,a)        (*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
+
+extern void omap1_map_common_io(void);
+extern void omap1_init_common_hw(void);
+
+extern void omap2_map_common_io(void);
+extern void omap2_init_common_hw(void);
+
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h
new file mode 100644
index 000000000000..8372a00d8e0b
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/irda.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irda.h
+ *
+ *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_SEL          1       /* Selects IrDA */
+#define IR_SIRMODE      2
+#define IR_FIRMODE      4
+#define IR_MIRMODE      8
+
+struct omap_irda_config {
+        int transceiver_cap;
+        int (*transceiver_mode)(struct device *dev, int mode);
+        int (*select_irda)(struct device *dev, int state);
+        /* Very specific to the needs of some platforms (h3,h4)
+         * having calls which can sleep in irda_set_speed.
+         */
+        struct delayed_work gpio_expa;
+        int rx_channel;
+        int tx_channel;
+        unsigned long dest_start;
+        unsigned long src_start;
+        int tx_trigger;
+        int rx_trigger;
+        int mode;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
new file mode 100644
index 000000000000..17248bbf3f27
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -0,0 +1,332 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *       are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA              1
+#define INT_FIQ                 3
+#define INT_RTDX                6
+#define INT_DSP_MMU_ABORT       7
+#define INT_HOST                8
+#define INT_ABORT               9
+#define INT_BRIDGE_PRIV         13
+#define INT_GPIO_BANK1          14
+#define INT_UART3               15
+#define INT_TIMER3              16
+#define INT_DMA_CH0_6           19
+#define INT_DMA_CH1_7           20
+#define INT_DMA_CH2_8           21
+#define INT_DMA_CH3             22
+#define INT_DMA_CH4             23
+#define INT_DMA_CH5             24
+#define INT_DMA_LCD             25
+#define INT_TIMER1              26
+#define INT_WD_TIMER            27
+#define INT_BRIDGE_PUB          28
+#define INT_TIMER2              30
+#define INT_LCD_CTRL            31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ        0
+#define INT_1510_RES2           2
+#define INT_1510_SPI_TX         4
+#define INT_1510_SPI_RX         5
+#define INT_1510_DSP_MAILBOX1   10
+#define INT_1510_DSP_MAILBOX2   11
+#define INT_1510_RES12          12
+#define INT_1510_LB_MMU         17
+#define INT_1510_RES18          18
+#define INT_1510_LOCAL_BUS      29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ        0
+#define INT_1610_IH2_FIQ        2
+#define INT_1610_McBSP2_TX      4
+#define INT_1610_McBSP2_RX      5
+#define INT_1610_DSP_MAILBOX1   10
+#define INT_1610_DSP_MAILBOX2   11
+#define INT_1610_LCD_LINE       12
+#define INT_1610_GPTIMER1       17
+#define INT_1610_GPTIMER2       18
+#define INT_1610_SSR_FIFO_0     29
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_730_IH2_FIQ         0
+#define INT_730_IH2_IRQ         1
+#define INT_730_USB_NON_ISO     2
+#define INT_730_USB_ISO         3
+#define INT_730_ICR             4
+#define INT_730_EAC             5
+#define INT_730_GPIO_BANK1      6
+#define INT_730_GPIO_BANK2      7
+#define INT_730_GPIO_BANK3      8
+#define INT_730_McBSP2TX        10
+#define INT_730_McBSP2RX        11
+#define INT_730_McBSP2RX_OVF    12
+#define INT_730_LCD_LINE        14
+#define INT_730_GSM_PROTECT     15
+#define INT_730_TIMER3          16
+#define INT_730_GPIO_BANK5      17
+#define INT_730_GPIO_BANK6      18
+#define INT_730_SPGIO_WR        29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE                32
+
+#define INT_KEYBOARD            (1 + IH2_BASE)
+#define INT_uWireTX             (2 + IH2_BASE)
+#define INT_uWireRX             (3 + IH2_BASE)
+#define INT_I2C                 (4 + IH2_BASE)
+#define INT_MPUIO               (5 + IH2_BASE)
+#define INT_USB_HHC_1           (6 + IH2_BASE)
+#define INT_McBSP3TX            (10 + IH2_BASE)
+#define INT_McBSP3RX            (11 + IH2_BASE)
+#define INT_McBSP1TX            (12 + IH2_BASE)
+#define INT_McBSP1RX            (13 + IH2_BASE)
+#define INT_UART1               (14 + IH2_BASE)
+#define INT_UART2               (15 + IH2_BASE)
+#define INT_BT_MCSI1TX          (16 + IH2_BASE)
+#define INT_BT_MCSI1RX          (17 + IH2_BASE)
+#define INT_USB_W2FC            (20 + IH2_BASE)
+#define INT_1WIRE               (21 + IH2_BASE)
+#define INT_OS_TIMER            (22 + IH2_BASE)
+#define INT_MMC                 (23 + IH2_BASE)
+#define INT_GAUGE_32K           (24 + IH2_BASE)
+#define INT_RTC_TIMER           (25 + IH2_BASE)
+#define INT_RTC_ALARM           (26 + IH2_BASE)
+#define INT_MEM_STICK           (27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU        (28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO     (31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC            (0 + IH2_BASE)
+#define INT_1610_USB_HHC_2      (7 + IH2_BASE)
+#define INT_1610_USB_OTG        (8 + IH2_BASE)
+#define INT_1610_SoSSI          (9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH    (19 + IH2_BASE)
+#define INT_1610_DSP_MMU        (28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF    (31 + IH2_BASE)
+#define INT_1610_STI            (32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP     (33 + IH2_BASE)
+#define INT_1610_GPTIMER3       (34 + IH2_BASE)
+#define INT_1610_GPTIMER4       (35 + IH2_BASE)
+#define INT_1610_GPTIMER5       (36 + IH2_BASE)
+#define INT_1610_GPTIMER6       (37 + IH2_BASE)
+#define INT_1610_GPTIMER7       (38 + IH2_BASE)
+#define INT_1610_GPTIMER8       (39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2     (40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3     (41 + IH2_BASE)
+#define INT_1610_MMC2           (42 + IH2_BASE)
+#define INT_1610_CF             (43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ    (46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4     (48 + IH2_BASE)
+#define INT_1610_SPI            (49 + IH2_BASE)
+#define INT_1610_DMA_CH6        (53 + IH2_BASE)
+#define INT_1610_DMA_CH7        (54 + IH2_BASE)
+#define INT_1610_DMA_CH8        (55 + IH2_BASE)
+#define INT_1610_DMA_CH9        (56 + IH2_BASE)
+#define INT_1610_DMA_CH10       (57 + IH2_BASE)
+#define INT_1610_DMA_CH11       (58 + IH2_BASE)
+#define INT_1610_DMA_CH12       (59 + IH2_BASE)
+#define INT_1610_DMA_CH13       (60 + IH2_BASE)
+#define INT_1610_DMA_CH14       (61 + IH2_BASE)
+#define INT_1610_DMA_CH15       (62 + IH2_BASE)
+#define INT_1610_NAND           (63 + IH2_BASE)
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_730_HW_ERRORS       (0 + IH2_BASE)
+#define INT_730_NFIQ_PWR_FAIL   (1 + IH2_BASE)
+#define INT_730_CFCD            (2 + IH2_BASE)
+#define INT_730_CFIREQ          (3 + IH2_BASE)
+#define INT_730_I2C             (4 + IH2_BASE)
+#define INT_730_PCC             (5 + IH2_BASE)
+#define INT_730_MPU_EXT_NIRQ    (6 + IH2_BASE)
+#define INT_730_SPI_100K_1      (7 + IH2_BASE)
+#define INT_730_SYREN_SPI       (8 + IH2_BASE)
+#define INT_730_VLYNQ           (9 + IH2_BASE)
+#define INT_730_GPIO_BANK4      (10 + IH2_BASE)
+#define INT_730_McBSP1TX        (11 + IH2_BASE)
+#define INT_730_McBSP1RX        (12 + IH2_BASE)
+#define INT_730_McBSP1RX_OF     (13 + IH2_BASE)
+#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_730_UART_MODEM_1    (15 + IH2_BASE)
+#define INT_730_MCSI            (16 + IH2_BASE)
+#define INT_730_uWireTX         (17 + IH2_BASE)
+#define INT_730_uWireRX         (18 + IH2_BASE)
+#define INT_730_SMC_CD          (19 + IH2_BASE)
+#define INT_730_SMC_IREQ        (20 + IH2_BASE)
+#define INT_730_HDQ_1WIRE       (21 + IH2_BASE)
+#define INT_730_TIMER32K        (22 + IH2_BASE)
+#define INT_730_MMC_SDIO        (23 + IH2_BASE)
+#define INT_730_UPLD            (24 + IH2_BASE)
+#define INT_730_USB_HHC_1       (27 + IH2_BASE)
+#define INT_730_USB_HHC_2       (28 + IH2_BASE)
+#define INT_730_USB_GENI        (29 + IH2_BASE)
+#define INT_730_USB_OTG         (30 + IH2_BASE)
+#define INT_730_CAMERA_IF       (31 + IH2_BASE)
+#define INT_730_RNG             (32 + IH2_BASE)
+#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_730_DBB_RF_EN       (34 + IH2_BASE)
+#define INT_730_MPUIO_KEYPAD    (35 + IH2_BASE)
+#define INT_730_SHA1_MD5        (36 + IH2_BASE)
+#define INT_730_SPI_100K_2      (37 + IH2_BASE)
+#define INT_730_RNG_IDLE        (38 + IH2_BASE)
+#define INT_730_MPUIO           (39 + IH2_BASE)
+#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF        (40 + IH2_BASE)
+#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_730_LLPC_OE_RISING  (42 + IH2_BASE)
+#define INT_730_LLPC_VSYNC      (43 + IH2_BASE)
+#define INT_730_WAKE_UP_REQ     (46 + IH2_BASE)
+#define INT_730_DMA_CH6         (53 + IH2_BASE)
+#define INT_730_DMA_CH7         (54 + IH2_BASE)
+#define INT_730_DMA_CH8         (55 + IH2_BASE)
+#define INT_730_DMA_CH9         (56 + IH2_BASE)
+#define INT_730_DMA_CH10        (57 + IH2_BASE)
+#define INT_730_DMA_CH11        (58 + IH2_BASE)
+#define INT_730_DMA_CH12        (59 + IH2_BASE)
+#define INT_730_DMA_CH13        (60 + IH2_BASE)
+#define INT_730_DMA_CH14        (61 + IH2_BASE)
+#define INT_730_DMA_CH15        (62 + IH2_BASE)
+#define INT_730_NAND            (63 + IH2_BASE)
+
+#define INT_24XX_SYS_NIRQ       7
+#define INT_24XX_SDMA_IRQ0      12
+#define INT_24XX_SDMA_IRQ1      13
+#define INT_24XX_SDMA_IRQ2      14
+#define INT_24XX_SDMA_IRQ3      15
+#define INT_24XX_CAM_IRQ        24
+#define INT_24XX_DSS_IRQ        25
+#define INT_24XX_MAIL_U0_MPU    26
+#define INT_24XX_DSP_UMA        27
+#define INT_24XX_DSP_MMU        28
+#define INT_24XX_GPIO_BANK1     29
+#define INT_24XX_GPIO_BANK2     30
+#define INT_24XX_GPIO_BANK3     31
+#define INT_24XX_GPIO_BANK4     32
+#define INT_24XX_GPIO_BANK5     33
+#define INT_24XX_MAIL_U3_MPU    34
+#define INT_24XX_GPTIMER1       37
+#define INT_24XX_GPTIMER2       38
+#define INT_24XX_GPTIMER3       39
+#define INT_24XX_GPTIMER4       40
+#define INT_24XX_GPTIMER5       41
+#define INT_24XX_GPTIMER6       42
+#define INT_24XX_GPTIMER7       43
+#define INT_24XX_GPTIMER8       44
+#define INT_24XX_GPTIMER9       45
+#define INT_24XX_GPTIMER10      46
+#define INT_24XX_GPTIMER11      47
+#define INT_24XX_GPTIMER12      48
+#define INT_24XX_I2C1_IRQ       56
+#define INT_24XX_I2C2_IRQ       57
+#define INT_24XX_MCBSP1_IRQ_TX  59
+#define INT_24XX_MCBSP1_IRQ_RX  60
+#define INT_24XX_MCBSP2_IRQ_TX  62
+#define INT_24XX_MCBSP2_IRQ_RX  63
+#define INT_24XX_UART1_IRQ      72
+#define INT_24XX_UART2_IRQ      73
+#define INT_24XX_UART3_IRQ      74
+#define INT_24XX_USB_IRQ_GEN    75
+#define INT_24XX_USB_IRQ_NISO   76
+#define INT_24XX_USB_IRQ_ISO    77
+#define INT_24XX_USB_IRQ_HGEN   78
+#define INT_24XX_USB_IRQ_HSOF   79
+#define INT_24XX_USB_IRQ_OTG    80
+#define INT_24XX_MMC_IRQ        83
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES     192
+#define IH_GPIO_BASE            (128 + IH2_BASE)
+#define IH_MPUIO_BASE           (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END            (IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define OMAP_FPGA_IRQ_BASE      (OMAP_IRQ_END)
+#ifdef  CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS       24
+#else
+#define OMAP_FPGA_NR_IRQS       0
+#endif
+#define OMAP_FPGA_IRQ_END       (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
+#define TWL4030_IRQ_BASE        (OMAP_FPGA_IRQ_END)
+#ifdef  CONFIG_TWL4030_CORE
+#define TWL4030_BASE_NR_IRQS    8
+#define TWL4030_PWR_NR_IRQS     8
+#else
+#define TWL4030_BASE_NR_IRQS    0
+#define TWL4030_PWR_NR_IRQS     0
+#endif
+#define TWL4030_IRQ_END         (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
+#define TWL4030_PWR_IRQ_BASE    TWL4030_IRQ_END
+#define TWL4030_PWR_IRQ_END     (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
+
+/* External TWL4030 gpio interrupts are optional */
+#define TWL4030_GPIO_IRQ_BASE   TWL4030_PWR_IRQ_END
+#ifdef  CONFIG_TWL4030_GPIO
+#define TWL4030_GPIO_NR_IRQS    18
+#else
+#define TWL4030_GPIO_NR_IRQS    0
+#endif
+#define TWL4030_GPIO_IRQ_END    (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
+
+/* Total number of interrupts depends on the enabled blocks above */
+#define NR_IRQS                 TWL4030_GPIO_IRQ_END
+
+#define OMAP_IRQ_BIT(irq)       (1 << ((irq) % 32))
+
+#ifndef __ASSEMBLY__
+extern void omap_init_irq(void);
+#endif
+
+#include <mach/hardware.h>
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
new file mode 100644
index 000000000000..232923aaf61d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/plat-omap/include/mach/keypad.h
+ *
+ *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_KEYPAD_H
+#define ASMARM_ARCH_KEYPAD_H
+
+struct omap_kp_platform_data {
+        int rows;
+        int cols;
+        int *keymap;
+        unsigned int keymapsize;
+        unsigned int rep:1;
+        unsigned long delay;
+        unsigned int dbounce:1;
+        /* specific to OMAP242x*/
+        unsigned int *row_gpios;
+        unsigned int *col_gpios;
+};
+
+/* Group (0..3) -- when multiple keys are pressed, only the
+ * keys pressed in the same group are considered as pressed. This is
+ * in order to workaround certain crappy HW designs that produce ghost
+ * keypresses. */
+#define GROUP_0         (0 << 16)
+#define GROUP_1         (1 << 16)
+#define GROUP_2         (2 << 16)
+#define GROUP_3         (3 << 16)
+#define GROUP_MASK      GROUP_3
+
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/mach/lcd_mipid.h
new file mode 100644
index 000000000000..f8fbc4801e52
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/lcd_mipid.h
@@ -0,0 +1,24 @@
+#ifndef __LCD_MIPID_H
+#define __LCD_MIPID_H
+
+enum mipid_test_num {
+        MIPID_TEST_RGB_LINES,
+};
+
+enum mipid_test_result {
+        MIPID_TEST_SUCCESS,
+        MIPID_TEST_INVALID,
+        MIPID_TEST_FAILED,
+};
+
+#ifdef __KERNEL__
+
+struct mipid_platform_data {
+        int     nreset_gpio;
+        int     data_lines;
+        void    (*shutdown)(struct mipid_platform_data *pdata);
+};
+
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/mach/led.h
new file mode 100644
index 000000000000..25e451e7e2fd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/led.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/plat-omap/include/mach/led.h
+ *
+ *  Copyright (C) 2006 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_LED_H
+#define ASMARM_ARCH_LED_H
+
+struct omap_led_config {
+        struct led_classdev     cdev;
+        s16                     gpio;
+};
+
+struct omap_led_platform_data {
+        s16                     nr_leds;
+        struct omap_led_config  *leds;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h
new file mode 100644
index 000000000000..7cbed9332e16
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mailbox.h
@@ -0,0 +1,73 @@
+/* mailbox.h */
+
+#ifndef MAILBOX_H
+#define MAILBOX_H
+
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/blkdev.h>
+
+typedef u32 mbox_msg_t;
+typedef void (mbox_receiver_t)(mbox_msg_t msg);
+struct omap_mbox;
+
+typedef int __bitwise omap_mbox_irq_t;
+#define IRQ_TX ((__force omap_mbox_irq_t) 1)
+#define IRQ_RX ((__force omap_mbox_irq_t) 2)
+
+typedef int __bitwise omap_mbox_type_t;
+#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1)
+#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2)
+
+struct omap_mbox_ops {
+        omap_mbox_type_t        type;
+        int             (*startup)(struct omap_mbox *mbox);
+        void            (*shutdown)(struct omap_mbox *mbox);
+        /* fifo */
+        mbox_msg_t      (*fifo_read)(struct omap_mbox *mbox);
+        void            (*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg);
+        int             (*fifo_empty)(struct omap_mbox *mbox);
+        int             (*fifo_full)(struct omap_mbox *mbox);
+        /* irq */
+        void            (*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+        void            (*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+        void            (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+        int             (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+};
+
+struct omap_mbox_queue {
+        spinlock_t              lock;
+        struct request_queue    *queue;
+        struct work_struct      work;
+        int     (*callback)(void *);
+        struct omap_mbox        *mbox;
+};
+
+struct omap_mbox {
+        char                    *name;
+        unsigned int            irq;
+
+        struct omap_mbox_queue  *txq, *rxq;
+
+        struct omap_mbox_ops    *ops;
+
+        mbox_msg_t              seq_snd, seq_rcv;
+
+        struct device           dev;
+
+        struct omap_mbox        *next;
+        void                    *priv;
+
+        void                    (*err_notify)(void);
+};
+
+int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *);
+void omap_mbox_init_seq(struct omap_mbox *);
+
+struct omap_mbox *omap_mbox_get(const char *);
+void omap_mbox_put(struct omap_mbox *);
+
+int omap_mbox_register(struct omap_mbox *);
+int omap_mbox_unregister(struct omap_mbox *);
+
+#endif /* MAILBOX_H */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
new file mode 100644
index 000000000000..6eb44a92871d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -0,0 +1,380 @@
+/*
+ * arch/arm/plat-omap/include/mach/mcbsp.h
+ *
+ * Defines for Multi-Channel Buffered Serial Port
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#define __ASM_ARCH_OMAP_MCBSP_H
+
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
+#include <mach/clock.h>
+
+#define OMAP730_MCBSP1_BASE     0xfffb1000
+#define OMAP730_MCBSP2_BASE     0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE    0xe1011800
+#define OMAP1510_MCBSP2_BASE    0xfffb1000
+#define OMAP1510_MCBSP3_BASE    0xe1017000
+
+#define OMAP1610_MCBSP1_BASE    0xe1011800
+#define OMAP1610_MCBSP2_BASE    0xfffb1000
+#define OMAP1610_MCBSP3_BASE    0xe1017000
+
+#define OMAP24XX_MCBSP1_BASE    0x48074000
+#define OMAP24XX_MCBSP2_BASE    0x48076000
+
+#define OMAP34XX_MCBSP1_BASE    0x48074000
+#define OMAP34XX_MCBSP2_BASE    0x49022000
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
+
+#define OMAP_MCBSP_REG_DRR2     0x00
+#define OMAP_MCBSP_REG_DRR1     0x02
+#define OMAP_MCBSP_REG_DXR2     0x04
+#define OMAP_MCBSP_REG_DXR1     0x06
+#define OMAP_MCBSP_REG_SPCR2    0x08
+#define OMAP_MCBSP_REG_SPCR1    0x0a
+#define OMAP_MCBSP_REG_RCR2     0x0c
+#define OMAP_MCBSP_REG_RCR1     0x0e
+#define OMAP_MCBSP_REG_XCR2     0x10
+#define OMAP_MCBSP_REG_XCR1     0x12
+#define OMAP_MCBSP_REG_SRGR2    0x14
+#define OMAP_MCBSP_REG_SRGR1    0x16
+#define OMAP_MCBSP_REG_MCR2     0x18
+#define OMAP_MCBSP_REG_MCR1     0x1a
+#define OMAP_MCBSP_REG_RCERA    0x1c
+#define OMAP_MCBSP_REG_RCERB    0x1e
+#define OMAP_MCBSP_REG_XCERA    0x20
+#define OMAP_MCBSP_REG_XCERB    0x22
+#define OMAP_MCBSP_REG_PCR0     0x24
+#define OMAP_MCBSP_REG_RCERC    0x26
+#define OMAP_MCBSP_REG_RCERD    0x28
+#define OMAP_MCBSP_REG_XCERC    0x2A
+#define OMAP_MCBSP_REG_XCERD    0x2C
+#define OMAP_MCBSP_REG_RCERE    0x2E
+#define OMAP_MCBSP_REG_RCERF    0x30
+#define OMAP_MCBSP_REG_XCERE    0x32
+#define OMAP_MCBSP_REG_XCERF    0x34
+#define OMAP_MCBSP_REG_RCERG    0x36
+#define OMAP_MCBSP_REG_RCERH    0x38
+#define OMAP_MCBSP_REG_XCERG    0x3A
+#define OMAP_MCBSP_REG_XCERH    0x3C
+
+#define OMAP_MAX_MCBSP_COUNT    3
+#define MAX_MCBSP_CLOCKS        3
+
+#define AUDIO_MCBSP_DATAWRITE   (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD    (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP             OMAP_MCBSP1
+#define AUDIO_DMA_TX            OMAP_DMA_MCBSP1_TX
+#define AUDIO_DMA_RX            OMAP_DMA_MCBSP1_RX
+
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#define OMAP_MCBSP_REG_DRR2     0x00
+#define OMAP_MCBSP_REG_DRR1     0x04
+#define OMAP_MCBSP_REG_DXR2     0x08
+#define OMAP_MCBSP_REG_DXR1     0x0C
+#define OMAP_MCBSP_REG_SPCR2    0x10
+#define OMAP_MCBSP_REG_SPCR1    0x14
+#define OMAP_MCBSP_REG_RCR2     0x18
+#define OMAP_MCBSP_REG_RCR1     0x1C
+#define OMAP_MCBSP_REG_XCR2     0x20
+#define OMAP_MCBSP_REG_XCR1     0x24
+#define OMAP_MCBSP_REG_SRGR2    0x28
+#define OMAP_MCBSP_REG_SRGR1    0x2C
+#define OMAP_MCBSP_REG_MCR2     0x30
+#define OMAP_MCBSP_REG_MCR1     0x34
+#define OMAP_MCBSP_REG_RCERA    0x38
+#define OMAP_MCBSP_REG_RCERB    0x3C
+#define OMAP_MCBSP_REG_XCERA    0x40
+#define OMAP_MCBSP_REG_XCERB    0x44
+#define OMAP_MCBSP_REG_PCR0     0x48
+#define OMAP_MCBSP_REG_RCERC    0x4C
+#define OMAP_MCBSP_REG_RCERD    0x50
+#define OMAP_MCBSP_REG_XCERC    0x54
+#define OMAP_MCBSP_REG_XCERD    0x58
+#define OMAP_MCBSP_REG_RCERE    0x5C
+#define OMAP_MCBSP_REG_RCERF    0x60
+#define OMAP_MCBSP_REG_XCERE    0x64
+#define OMAP_MCBSP_REG_XCERF    0x68
+#define OMAP_MCBSP_REG_RCERG    0x6C
+#define OMAP_MCBSP_REG_RCERH    0x70
+#define OMAP_MCBSP_REG_XCERG    0x74
+#define OMAP_MCBSP_REG_XCERH    0x78
+
+#define OMAP_MAX_MCBSP_COUNT    2
+#define MAX_MCBSP_CLOCKS        2
+
+#define AUDIO_MCBSP_DATAWRITE   (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD    (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP             OMAP_MCBSP2
+#define AUDIO_DMA_TX            OMAP24XX_DMA_MCBSP2_TX
+#define AUDIO_DMA_RX            OMAP24XX_DMA_MCBSP2_RX
+
+#endif
+
+#define OMAP_MCBSP_READ(base, reg)              __raw_readw((base) + OMAP_MCBSP_REG_##reg)
+#define OMAP_MCBSP_WRITE(base, reg, val)        __raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
+
+
+/************************** McBSP SPCR1 bit definitions ***********************/
+#define RRST                    0x0001
+#define RRDY                    0x0002
+#define RFULL                   0x0004
+#define RSYNC_ERR               0x0008
+#define RINTM(value)            ((value)<<4)    /* bits 4:5 */
+#define ABIS                    0x0040
+#define DXENA                   0x0080
+#define CLKSTP(value)           ((value)<<11)   /* bits 11:12 */
+#define RJUST(value)            ((value)<<13)   /* bits 13:14 */
+#define DLB                     0x8000
+
+/************************** McBSP SPCR2 bit definitions ***********************/
+#define XRST            0x0001
+#define XRDY            0x0002
+#define XEMPTY          0x0004
+#define XSYNC_ERR       0x0008
+#define XINTM(value)    ((value)<<4)            /* bits 4:5 */
+#define GRST            0x0040
+#define FRST            0x0080
+#define SOFT            0x0100
+#define FREE            0x0200
+
+/************************** McBSP PCR bit definitions *************************/
+#define CLKRP           0x0001
+#define CLKXP           0x0002
+#define FSRP            0x0004
+#define FSXP            0x0008
+#define DR_STAT         0x0010
+#define DX_STAT         0x0020
+#define CLKS_STAT       0x0040
+#define SCLKME          0x0080
+#define CLKRM           0x0100
+#define CLKXM           0x0200
+#define FSRM            0x0400
+#define FSXM            0x0800
+#define RIOEN           0x1000
+#define XIOEN           0x2000
+#define IDLE_EN         0x4000
+
+/************************** McBSP RCR1 bit definitions ************************/
+#define RWDLEN1(value)          ((value)<<5)    /* Bits 5:7 */
+#define RFRLEN1(value)          ((value)<<8)    /* Bits 8:14 */
+
+/************************** McBSP XCR1 bit definitions ************************/
+#define XWDLEN1(value)          ((value)<<5)    /* Bits 5:7 */
+#define XFRLEN1(value)          ((value)<<8)    /* Bits 8:14 */
+
+/*************************** McBSP RCR2 bit definitions ***********************/
+#define RDATDLY(value)          (value)         /* Bits 0:1 */
+#define RFIG                    0x0004
+#define RCOMPAND(value)         ((value)<<3)    /* Bits 3:4 */
+#define RWDLEN2(value)          ((value)<<5)    /* Bits 5:7 */
+#define RFRLEN2(value)          ((value)<<8)    /* Bits 8:14 */
+#define RPHASE                  0x8000
+
+/*************************** McBSP XCR2 bit definitions ***********************/
+#define XDATDLY(value)          (value)         /* Bits 0:1 */
+#define XFIG                    0x0004
+#define XCOMPAND(value)         ((value)<<3)    /* Bits 3:4 */
+#define XWDLEN2(value)          ((value)<<5)    /* Bits 5:7 */
+#define XFRLEN2(value)          ((value)<<8)    /* Bits 8:14 */
+#define XPHASE                  0x8000
+
+/************************* McBSP SRGR1 bit definitions ************************/
+#define CLKGDV(value)           (value)         /* Bits 0:7 */
+#define FWID(value)             ((value)<<8)    /* Bits 8:15 */
+
+/************************* McBSP SRGR2 bit definitions ************************/
+#define FPER(value)             (value)         /* Bits 0:11 */
+#define FSGM                    0x1000
+#define CLKSM                   0x2000
+#define CLKSP                   0x4000
+#define GSYNC                   0x8000
+
+/************************* McBSP MCR1 bit definitions *************************/
+#define RMCM                    0x0001
+#define RCBLK(value)            ((value)<<2)    /* Bits 2:4 */
+#define RPABLK(value)           ((value)<<5)    /* Bits 5:6 */
+#define RPBBLK(value)           ((value)<<7)    /* Bits 7:8 */
+
+/************************* McBSP MCR2 bit definitions *************************/
+#define XMCM(value)             (value)         /* Bits 0:1 */
+#define XCBLK(value)            ((value)<<2)    /* Bits 2:4 */
+#define XPABLK(value)           ((value)<<5)    /* Bits 5:6 */
+#define XPBBLK(value)           ((value)<<7)    /* Bits 7:8 */
+
+
+/* we don't do multichannel for now */
+struct omap_mcbsp_reg_cfg {
+        u16 spcr2;
+        u16 spcr1;
+        u16 rcr2;
+        u16 rcr1;
+        u16 xcr2;
+        u16 xcr1;
+        u16 srgr2;
+        u16 srgr1;
+        u16 mcr2;
+        u16 mcr1;
+        u16 pcr0;
+        u16 rcerc;
+        u16 rcerd;
+        u16 xcerc;
+        u16 xcerd;
+        u16 rcere;
+        u16 rcerf;
+        u16 xcere;
+        u16 xcerf;
+        u16 rcerg;
+        u16 rcerh;
+        u16 xcerg;
+        u16 xcerh;
+};
+
+typedef enum {
+        OMAP_MCBSP1 = 0,
+        OMAP_MCBSP2,
+        OMAP_MCBSP3,
+} omap_mcbsp_id;
+
+typedef int __bitwise omap_mcbsp_io_type_t;
+#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1)
+#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2)
+
+typedef enum {
+        OMAP_MCBSP_WORD_8 = 0,
+        OMAP_MCBSP_WORD_12,
+        OMAP_MCBSP_WORD_16,
+        OMAP_MCBSP_WORD_20,
+        OMAP_MCBSP_WORD_24,
+        OMAP_MCBSP_WORD_32,
+} omap_mcbsp_word_length;
+
+typedef enum {
+        OMAP_MCBSP_CLK_RISING = 0,
+        OMAP_MCBSP_CLK_FALLING,
+} omap_mcbsp_clk_polarity;
+
+typedef enum {
+        OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
+        OMAP_MCBSP_FS_ACTIVE_LOW,
+} omap_mcbsp_fs_polarity;
+
+typedef enum {
+        OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
+        OMAP_MCBSP_CLK_STP_MODE_DELAY,
+} omap_mcbsp_clk_stp_mode;
+
+
+/******* SPI specific mode **********/
+typedef enum {
+        OMAP_MCBSP_SPI_MASTER = 0,
+        OMAP_MCBSP_SPI_SLAVE,
+} omap_mcbsp_spi_mode;
+
+struct omap_mcbsp_spi_cfg {
+        omap_mcbsp_spi_mode             spi_mode;
+        omap_mcbsp_clk_polarity         rx_clock_polarity;
+        omap_mcbsp_clk_polarity         tx_clock_polarity;
+        omap_mcbsp_fs_polarity          fsx_polarity;
+        u8                              clk_div;
+        omap_mcbsp_clk_stp_mode         clk_stp_mode;
+        omap_mcbsp_word_length          word_length;
+};
+
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+        void (*request)(unsigned int);
+        void (*free)(unsigned int);
+        int (*check)(unsigned int);
+};
+
+struct omap_mcbsp_platform_data {
+        u32 virt_base;
+        u8 dma_rx_sync, dma_tx_sync;
+        u16 rx_irq, tx_irq;
+        struct omap_mcbsp_ops *ops;
+        char const *clk_name;
+};
+
+struct omap_mcbsp {
+        struct device *dev;
+        u32 io_base;
+        u8 id;
+        u8 free;
+        omap_mcbsp_word_length rx_word_length;
+        omap_mcbsp_word_length tx_word_length;
+
+        omap_mcbsp_io_type_t io_type; /* IRQ or poll */
+        /* IRQ based TX/RX */
+        int rx_irq;
+        int tx_irq;
+
+        /* DMA stuff */
+        u8 dma_rx_sync;
+        short dma_rx_lch;
+        u8 dma_tx_sync;
+        short dma_tx_lch;
+
+        /* Completion queues */
+        struct completion tx_irq_completion;
+        struct completion rx_irq_completion;
+        struct completion tx_dma_completion;
+        struct completion rx_dma_completion;
+
+        /* Protect the field .free, while checking if the mcbsp is in use */
+        spinlock_t lock;
+        struct omap_mcbsp_platform_data *pdata;
+        struct clk *clk;
+};
+
+int omap_mcbsp_init(void);
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+                                        int size);
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+int omap_mcbsp_request(unsigned int id);
+void omap_mcbsp_free(unsigned int id);
+void omap_mcbsp_start(unsigned int id);
+void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_xmit_word(unsigned int id, u32 word);
+u32 omap_mcbsp_recv_word(unsigned int id);
+
+int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
+int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
+
+
+/* SPI specific API */
+void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
+
+/* Polled read/write functions */
+int omap_mcbsp_pollread(unsigned int id, u16 * buf);
+int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mcspi.h b/arch/arm/plat-omap/include/mach/mcspi.h
new file mode 100644
index 000000000000..1254e4945b6f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mcspi.h
@@ -0,0 +1,15 @@
+#ifndef _OMAP2_MCSPI_H
+#define _OMAP2_MCSPI_H
+
+struct omap2_mcspi_platform_config {
+        unsigned short  num_cs;
+};
+
+struct omap2_mcspi_device_config {
+        unsigned turbo_mode:1;
+
+        /* Do we want one channel enabled at the same time? */
+        unsigned single_channel:1;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
new file mode 100644
index 000000000000..037486c5f4a4
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/plat-omap/include/mach/memory.h
+ *
+ * Memory map for OMAP-1510 and 1610
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#if defined(CONFIG_ARCH_OMAP1)
+#define PHYS_OFFSET             UL(0x10000000)
+#elif defined(CONFIG_ARCH_OMAP2)
+#define PHYS_OFFSET             UL(0x80000000)
+#endif
+
+/*
+ * Conversion between SDRAM and fake PCI bus, used by USB
+ * NOTE: Physical address must be converted to Local Bus address
+ *       on OMAP-1510 only
+ */
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ */
+#define __virt_to_bus(x)        __virt_to_phys(x)
+#define __bus_to_virt(x)        __phys_to_virt(x)
+
+/*
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET      UL(0x30000000)
+
+#define virt_to_lbus(x)         ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x)         ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev)     (cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
+
+#define __arch_page_to_dma(dev, page)   ({is_lbus_device(dev) ? \
+                                        (dma_addr_t)virt_to_lbus(page_address(page)) : \
+                                        (dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr)   ({is_lbus_device(dev) ? \
+                                        lbus_to_virt(addr) : \
+                                        __bus_to_virt(addr);})
+
+#define __arch_virt_to_dma(dev, addr)   ({is_lbus_device(dev) ? \
+                                        virt_to_lbus(addr) : \
+                                        __virt_to_bus(addr);})
+
+#endif  /* CONFIG_ARCH_OMAP15XX */
+
+/* Override the ARM default */
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+
+#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
+#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
+#endif
+
+#define CONSISTENT_DMA_SIZE \
+        (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
+
+#endif
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/mach/menelaus.h
new file mode 100644
index 000000000000..3122bf68c7ce
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/menelaus.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/plat-omap/include/mach/menelaus.h
+ *
+ * Functions to access Menelaus power management chip
+ */
+
+#ifndef __ASM_ARCH_MENELAUS_H
+#define __ASM_ARCH_MENELAUS_H
+
+struct device;
+
+struct menelaus_platform_data {
+        int (* late_init)(struct device *dev);
+};
+
+extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
+                                          void *data);
+extern void menelaus_unregister_mmc_callback(void);
+extern int menelaus_set_mmc_opendrain(int slot, int enable);
+extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on);
+
+extern int menelaus_set_vmem(unsigned int mV);
+extern int menelaus_set_vio(unsigned int mV);
+extern int menelaus_set_vmmc(unsigned int mV);
+extern int menelaus_set_vaux(unsigned int mV);
+extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
+extern int menelaus_set_slot_sel(int enable);
+extern int menelaus_get_slot_pin_states(void);
+extern int menelaus_set_vcore_sw(unsigned int mV);
+extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
+
+#define EN_VPLL_SLEEP   (1 << 7)
+#define EN_VMMC_SLEEP   (1 << 6)
+#define EN_VAUX_SLEEP   (1 << 5)
+#define EN_VIO_SLEEP    (1 << 4)
+#define EN_VMEM_SLEEP   (1 << 3)
+#define EN_DC3_SLEEP    (1 << 2)
+#define EN_DC2_SLEEP    (1 << 1)
+#define EN_VC_SLEEP     (1 << 0)
+
+extern int menelaus_set_regulator_sleep(int enable, u32 val);
+
+#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
+#define omap_has_menelaus()     1
+#else
+#define omap_has_menelaus()     0
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
new file mode 100644
index 000000000000..fc15d13058fc
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -0,0 +1,74 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_MMC_H
+#define __OMAP2_MMC_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/board.h>
+
+#define OMAP_MMC_MAX_SLOTS      2
+
+struct omap_mmc_platform_data {
+        struct omap_mmc_conf    conf;
+
+        /* number of slots on board */
+        unsigned nr_slots:2;
+
+        /* set if your board has components or wiring that limits the
+         * maximum frequency on the MMC bus */
+        unsigned int max_freq;
+
+        /* switch the bus to a new slot */
+        int (* switch_slot)(struct device *dev, int slot);
+        /* initialize board-specific MMC functionality, can be NULL if
+         * not supported */
+        int (* init)(struct device *dev);
+        void (* cleanup)(struct device *dev);
+        void (* shutdown)(struct device *dev);
+
+        /* To handle board related suspend/resume functionality for MMC */
+        int (*suspend)(struct device *dev, int slot);
+        int (*resume)(struct device *dev, int slot);
+
+        struct omap_mmc_slot_data {
+                int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
+                int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
+                int (* get_ro)(struct device *dev, int slot);
+
+                /* return MMC cover switch state, can be NULL if not supported.
+                 *
+                 * possible return values:
+                 *   0 - open
+                 *   1 - closed
+                 */
+                int (* get_cover_state)(struct device *dev, int slot);
+
+                const char *name;
+                u32 ocr_mask;
+
+                /* Card detection IRQs */
+                int card_detect_irq;
+                int (* card_detect)(int irq);
+
+                unsigned int ban_openended:1;
+
+        } slots[OMAP_MMC_MAX_SLOTS];
+};
+
+extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
+
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
new file mode 100644
index 000000000000..5cee7e16a1b4
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -0,0 +1,61 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions.
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
+ *
+ * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2.  This program is
+ * licensed "as is" without any warranty of any kind, whether express or
+ * implied.
+ */
+
+#ifndef __ARCH_OMAP_MTD_XIP_H__
+#define __ARCH_OMAP_MTD_XIP_H__
+
+#include <mach/hardware.h>
+#define OMAP_MPU_TIMER_BASE     (0xfffec500)
+#define OMAP_MPU_TIMER_OFFSET   0x100
+
+typedef struct {
+        u32 cntl;                       /* CNTL_TIMER, R/W */
+        u32 load_tim;                   /* LOAD_TIM,   W */
+        u32 read_tim;                   /* READ_TIM,   R */
+} xip_omap_mpu_timer_regs_t;
+
+#define xip_omap_mpu_timer_base(n)                                      \
+((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +  \
+        (n)*OMAP_MPU_TIMER_OFFSET))
+
+static inline unsigned long xip_omap_mpu_timer_read(int nr)
+{
+        volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
+        return timer->read_tim;
+}
+
+#define xip_irqpending()        \
+        (omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
+#define xip_currtime()          (~xip_omap_mpu_timer_read(0))
+
+/*
+ * It's permitted to do approxmation for xip_elapsed_since macro
+ * (see linux/mtd/xip.h)
+ */
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#define xip_elapsed_since(x)    (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
+#else
+#define xip_elapsed_since(x)    (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
+#endif
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
+
+#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
new file mode 100644
index 000000000000..614b2c1327c7
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -0,0 +1,615 @@
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *       For example, W8_1610_MMC2_DAT0, where:
+ *       - W8        = ball
+ *       - 1610      = 1510 or 1610, none if common for both 1510 and 1610
+ *       - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA            0       /* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA        0       /* No pull-down control needed */
+
+#ifdef  CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+                                        .mux_reg = FUNC_MUX_CTRL_##reg, \
+                                        .mask_offset = mode_offset, \
+                                        .mask = mode,
+
+#define PULL_REG(reg, bit, status)      .pull_name = "PULL_DWN_CTRL_"#reg, \
+                                        .pull_reg = PULL_DWN_CTRL_##reg, \
+                                        .pull_bit = bit, \
+                                        .pull_val = status,
+
+#define PU_PD_REG(reg, status)          .pu_pd_name = "PU_PD_SEL_"#reg, \
+                                        .pu_pd_reg = PU_PD_SEL_##reg, \
+                                        .pu_pd_val = status,
+
+#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
+                                        .mux_reg = OMAP730_IO_CONF_##reg, \
+                                        .mask_offset = mode_offset, \
+                                        .mask = mode,
+
+#define PULL_REG_730(reg, bit, status)  .pull_name = "OMAP730_IO_CONF_"#reg, \
+                                        .pull_reg = OMAP730_IO_CONF_##reg, \
+                                        .pull_bit = bit, \
+                                        .pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+                                        .mask_offset = mode_offset, \
+                                        .mask = mode,
+
+#define PULL_REG(reg, bit, status)      .pull_reg = PULL_DWN_CTRL_##reg, \
+                                        .pull_bit = bit, \
+                                        .pull_val = status,
+
+#define PU_PD_REG(reg, status)          .pu_pd_reg = PU_PD_SEL_##reg, \
+                                        .pu_pd_val = status,
+
+#define MUX_REG_730(reg, mode_offset, mode) \
+                                        .mux_reg = OMAP730_IO_CONF_##reg, \
+                                        .mask_offset = mode_offset, \
+                                        .mask = mode,
+
+#define PULL_REG_730(reg, bit, status)  .pull_reg = OMAP730_IO_CONF_##reg, \
+                                        .pull_bit = bit, \
+                                        .pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,       \
+                pull_reg, pull_bit, pull_status,        \
+                pu_pd_reg, pu_pd_status, debug_status)  \
+{                                                       \
+        .name =  desc,                                  \
+        .debug = debug_status,                          \
+        MUX_REG(mux_reg, mode_offset, mode)             \
+        PULL_REG(pull_reg, pull_bit, pull_status)       \
+        PU_PD_REG(pu_pd_reg, pu_pd_status)              \
+},
+
+
+/*
+ * OMAP730 has a slightly different config for the pin mux.
+ * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,   \
+                   pull_bit, pull_status, debug_status)\
+{                                                       \
+        .name =  desc,                                  \
+        .debug = debug_status,                          \
+        MUX_REG_730(mux_reg, mode_offset, mode)         \
+        PULL_REG_730(mux_reg, pull_bit, pull_status)    \
+        PU_PD_REG(NA, 0)                \
+},
+
+#define MUX_CFG_24XX(desc, reg_offset, mode,                    \
+                                pull_en, pull_mode, dbg)        \
+{                                                               \
+        .name           = desc,                                 \
+        .debug          = dbg,                                  \
+        .mux_reg        = reg_offset,                           \
+        .mask           = mode,                                 \
+        .pull_val       = pull_en,                              \
+        .pu_pd_val      = pull_mode,                            \
+},
+
+
+#define PULL_DISABLED   0
+#define PULL_ENABLED    1
+
+#define PULL_DOWN       0
+#define PULL_UP         1
+
+struct pin_config {
+        char *name;
+        unsigned char busy;
+        unsigned char debug;
+
+        const char *mux_reg_name;
+        const unsigned int mux_reg;
+        const unsigned char mask_offset;
+        const unsigned char mask;
+
+        const char *pull_name;
+        const unsigned int pull_reg;
+        const unsigned char pull_val;
+        const unsigned char pull_bit;
+
+        const char *pu_pd_name;
+        const unsigned int pu_pd_reg;
+        const unsigned char pu_pd_val;
+};
+
+enum omap730_index {
+        /* OMAP 730 keyboard */
+        E2_730_KBR0,
+        J7_730_KBR1,
+        E1_730_KBR2,
+        F3_730_KBR3,
+        D2_730_KBR4,
+        C2_730_KBC0,
+        D3_730_KBC1,
+        E4_730_KBC2,
+        F4_730_KBC3,
+        E3_730_KBC4,
+
+        /* USB */
+        AA17_730_USB_DM,
+        W16_730_USB_PU_EN,
+        W17_730_USB_VBUSI,
+};
+
+enum omap1xxx_index {
+        /* UART1 (BT_UART_GATING)*/
+        UART1_TX = 0,
+        UART1_RTS,
+
+        /* UART2 (COM_UART_GATING)*/
+        UART2_TX,
+        UART2_RX,
+        UART2_CTS,
+        UART2_RTS,
+
+        /* UART3 (GIGA_UART_GATING) */
+        UART3_TX,
+        UART3_RX,
+        UART3_CTS,
+        UART3_RTS,
+        UART3_CLKREQ,
+        UART3_BCLK,     /* 12MHz clock out */
+        Y15_1610_UART3_RTS,
+
+        /* PWT & PWL */
+        PWT,
+        PWL,
+
+        /* USB master generic */
+        R18_USB_VBUS,
+        R18_1510_USB_GPIO0,
+        W4_USB_PUEN,
+        W4_USB_CLKO,
+        W4_USB_HIGHZ,
+        W4_GPIO58,
+
+        /* USB1 master */
+        USB1_SUSP,
+        USB1_SEO,
+        W13_1610_USB1_SE0,
+        USB1_TXEN,
+        USB1_TXD,
+        USB1_VP,
+        USB1_VM,
+        USB1_RCV,
+        USB1_SPEED,
+        R13_1610_USB1_SPEED,
+        R13_1710_USB1_SE0,
+
+        /* USB2 master */
+        USB2_SUSP,
+        USB2_VP,
+        USB2_TXEN,
+        USB2_VM,
+        USB2_RCV,
+        USB2_SEO,
+        USB2_TXD,
+
+        /* OMAP-1510 GPIO */
+        R18_1510_GPIO0,
+        R19_1510_GPIO1,
+        M14_1510_GPIO2,
+
+        /* OMAP1610 GPIO */
+        P18_1610_GPIO3,
+        Y15_1610_GPIO17,
+
+        /* OMAP-1710 GPIO */
+        R18_1710_GPIO0,
+        V2_1710_GPIO10,
+        N21_1710_GPIO14,
+        W15_1710_GPIO40,
+
+        /* MPUIO */
+        MPUIO2,
+        N15_1610_MPUIO2,
+        MPUIO4,
+        MPUIO5,
+        T20_1610_MPUIO5,
+        W11_1610_MPUIO6,
+        V10_1610_MPUIO7,
+        W11_1610_MPUIO9,
+        V10_1610_MPUIO10,
+        W10_1610_MPUIO11,
+        E20_1610_MPUIO13,
+        U20_1610_MPUIO14,
+        E19_1610_MPUIO15,
+
+        /* MCBSP2 */
+        MCBSP2_CLKR,
+        MCBSP2_CLKX,
+        MCBSP2_DR,
+        MCBSP2_DX,
+        MCBSP2_FSR,
+        MCBSP2_FSX,
+
+        /* MCBSP3 */
+        MCBSP3_CLKX,
+
+        /* Misc ballouts */
+        BALLOUT_V8_ARMIO3,
+        N20_HDQ,
+
+        /* OMAP-1610 MMC2 */
+        W8_1610_MMC2_DAT0,
+        V8_1610_MMC2_DAT1,
+        W15_1610_MMC2_DAT2,
+        R10_1610_MMC2_DAT3,
+        Y10_1610_MMC2_CLK,
+        Y8_1610_MMC2_CMD,
+        V9_1610_MMC2_CMDDIR,
+        V5_1610_MMC2_DATDIR0,
+        W19_1610_MMC2_DATDIR1,
+        R18_1610_MMC2_CLKIN,
+
+        /* OMAP-1610 External Trace Interface */
+        M19_1610_ETM_PSTAT0,
+        L15_1610_ETM_PSTAT1,
+        L18_1610_ETM_PSTAT2,
+        L19_1610_ETM_D0,
+        J19_1610_ETM_D6,
+        J18_1610_ETM_D7,
+
+        /* OMAP16XX GPIO */
+        P20_1610_GPIO4,
+        V9_1610_GPIO7,
+        W8_1610_GPIO9,
+        N20_1610_GPIO11,
+        N19_1610_GPIO13,
+        P10_1610_GPIO22,
+        V5_1610_GPIO24,
+        AA20_1610_GPIO_41,
+        W19_1610_GPIO48,
+        M7_1610_GPIO62,
+        V14_16XX_GPIO37,
+        R9_16XX_GPIO18,
+        L14_16XX_GPIO49,
+
+        /* OMAP-1610 uWire */
+        V19_1610_UWIRE_SCLK,
+        U18_1610_UWIRE_SDI,
+        W21_1610_UWIRE_SDO,
+        N14_1610_UWIRE_CS0,
+        P15_1610_UWIRE_CS3,
+        N15_1610_UWIRE_CS1,
+
+        /* OMAP-1610 SPI */
+        U19_1610_SPIF_SCK,
+        U18_1610_SPIF_DIN,
+        P20_1610_SPIF_DIN,
+        W21_1610_SPIF_DOUT,
+        R18_1610_SPIF_DOUT,
+        N14_1610_SPIF_CS0,
+        N15_1610_SPIF_CS1,
+        T19_1610_SPIF_CS2,
+        P15_1610_SPIF_CS3,
+
+        /* OMAP-1610 Flash */
+        L3_1610_FLASH_CS2B_OE,
+        M8_1610_FLASH_CS2B_WE,
+
+        /* First MMC */
+        MMC_CMD,
+        MMC_DAT1,
+        MMC_DAT2,
+        MMC_DAT0,
+        MMC_CLK,
+        MMC_DAT3,
+
+        /* OMAP-1710 MMC CMDDIR and DATDIR0 */
+        M15_1710_MMC_CLKI,
+        P19_1710_MMC_CMDDIR,
+        P20_1710_MMC_DATDIR0,
+
+        /* OMAP-1610 USB0 alternate pin configuration */
+        W9_USB0_TXEN,
+        AA9_USB0_VP,
+        Y5_USB0_RCV,
+        R9_USB0_VM,
+        V6_USB0_TXD,
+        W5_USB0_SE0,
+        V9_USB0_SPEED,
+        V9_USB0_SUSP,
+
+        /* USB2 */
+        W9_USB2_TXEN,
+        AA9_USB2_VP,
+        Y5_USB2_RCV,
+        R9_USB2_VM,
+        V6_USB2_TXD,
+        W5_USB2_SE0,
+
+        /* 16XX UART */
+        R13_1610_UART1_TX,
+        V14_16XX_UART1_RX,
+        R14_1610_UART1_CTS,
+        AA15_1610_UART1_RTS,
+        R9_16XX_UART2_RX,
+        L14_16XX_UART3_RX,
+
+        /* I2C OMAP-1610 */
+        I2C_SCL,
+        I2C_SDA,
+
+        /* Keypad */
+        F18_1610_KBC0,
+        D20_1610_KBC1,
+        D19_1610_KBC2,
+        E18_1610_KBC3,
+        C21_1610_KBC4,
+        G18_1610_KBR0,
+        F19_1610_KBR1,
+        H14_1610_KBR2,
+        E20_1610_KBR3,
+        E19_1610_KBR4,
+        N19_1610_KBR5,
+
+        /* Power management */
+        T20_1610_LOW_PWR,
+
+        /* MCLK Settings */
+        V5_1710_MCLK_ON,
+        V5_1710_MCLK_OFF,
+        R10_1610_MCLK_ON,
+        R10_1610_MCLK_OFF,
+
+        /* CompactFlash controller */
+        P11_1610_CF_CD2,
+        R11_1610_CF_IOIS16,
+        V10_1610_CF_IREQ,
+        W10_1610_CF_RESET,
+        W11_1610_CF_CD1,
+
+        /* parallel camera */
+        J15_1610_CAM_LCLK,
+        J18_1610_CAM_D7,
+        J19_1610_CAM_D6,
+        J14_1610_CAM_D5,
+        K18_1610_CAM_D4,
+        K19_1610_CAM_D3,
+        K15_1610_CAM_D2,
+        K14_1610_CAM_D1,
+        L19_1610_CAM_D0,
+        L18_1610_CAM_VS,
+        L15_1610_CAM_HS,
+        M19_1610_CAM_RSTZ,
+        Y15_1610_CAM_OUTCLK,
+
+        /* serial camera */
+        H19_1610_CAM_EXCLK,
+        Y12_1610_CCP_CLKP,
+        W13_1610_CCP_CLKM,
+        W14_1610_CCP_DATAP,
+        Y14_1610_CCP_DATAM,
+
+};
+
+enum omap24xx_index {
+        /* 24xx I2C */
+        M19_24XX_I2C1_SCL,
+        L15_24XX_I2C1_SDA,
+        J15_24XX_I2C2_SCL,
+        H19_24XX_I2C2_SDA,
+
+        /* 24xx Menelaus interrupt */
+        W19_24XX_SYS_NIRQ,
+
+        /* 24xx clock */
+        W14_24XX_SYS_CLKOUT,
+
+        /* 24xx GPMC chipselects, wait pin monitoring */
+        E2_GPMC_NCS2,
+        L2_GPMC_NCS7,
+        L3_GPMC_WAIT0,
+        N7_GPMC_WAIT1,
+        M1_GPMC_WAIT2,
+        P1_GPMC_WAIT3,
+
+        /* 242X McBSP */
+        Y15_24XX_MCBSP2_CLKX,
+        R14_24XX_MCBSP2_FSX,
+        W15_24XX_MCBSP2_DR,
+        V15_24XX_MCBSP2_DX,
+
+        /* 24xx GPIO */
+        M21_242X_GPIO11,
+        P21_242X_GPIO12,
+        AA10_242X_GPIO13,
+        AA6_242X_GPIO14,
+        AA4_242X_GPIO15,
+        Y11_242X_GPIO16,
+        AA12_242X_GPIO17,
+        AA8_242X_GPIO58,
+        Y20_24XX_GPIO60,
+        W4__24XX_GPIO74,
+        N15_24XX_GPIO85,
+        M15_24XX_GPIO92,
+        P20_24XX_GPIO93,
+        P18_24XX_GPIO95,
+        M18_24XX_GPIO96,
+        L14_24XX_GPIO97,
+        J15_24XX_GPIO99,
+        V14_24XX_GPIO117,
+        P14_24XX_GPIO125,
+
+        /* 242x DBG GPIO */
+        V4_242X_GPIO49,
+        W2_242X_GPIO50,
+        U4_242X_GPIO51,
+        V3_242X_GPIO52,
+        V2_242X_GPIO53,
+        V6_242X_GPIO53,
+        T4_242X_GPIO54,
+        Y4_242X_GPIO54,
+        T3_242X_GPIO55,
+        U2_242X_GPIO56,
+
+        /* 24xx external DMA requests */
+        AA10_242X_DMAREQ0,
+        AA6_242X_DMAREQ1,
+        E4_242X_DMAREQ2,
+        G4_242X_DMAREQ3,
+        D3_242X_DMAREQ4,
+        E3_242X_DMAREQ5,
+
+        /* UART3 */
+        K15_24XX_UART3_TX,
+        K14_24XX_UART3_RX,
+
+        /* MMC/SDIO */
+        G19_24XX_MMC_CLKO,
+        H18_24XX_MMC_CMD,
+        F20_24XX_MMC_DAT0,
+        H14_24XX_MMC_DAT1,
+        E19_24XX_MMC_DAT2,
+        D19_24XX_MMC_DAT3,
+        F19_24XX_MMC_DAT_DIR0,
+        E20_24XX_MMC_DAT_DIR1,
+        F18_24XX_MMC_DAT_DIR2,
+        E18_24XX_MMC_DAT_DIR3,
+        G18_24XX_MMC_CMD_DIR,
+        H15_24XX_MMC_CLKI,
+
+        /* Full speed USB */
+        J20_24XX_USB0_PUEN,
+        J19_24XX_USB0_VP,
+        K20_24XX_USB0_VM,
+        J18_24XX_USB0_RCV,
+        K19_24XX_USB0_TXEN,
+        J14_24XX_USB0_SE0,
+        K18_24XX_USB0_DAT,
+
+        N14_24XX_USB1_SE0,
+        W12_24XX_USB1_SE0,
+        P15_24XX_USB1_DAT,
+        R13_24XX_USB1_DAT,
+        W20_24XX_USB1_TXEN,
+        P13_24XX_USB1_TXEN,
+        V19_24XX_USB1_RCV,
+        V12_24XX_USB1_RCV,
+
+        AA10_24XX_USB2_SE0,
+        Y11_24XX_USB2_DAT,
+        AA12_24XX_USB2_TXEN,
+        AA6_24XX_USB2_RCV,
+        AA4_24XX_USB2_TLLSE0,
+
+        /* Keypad GPIO*/
+        T19_24XX_KBR0,
+        R19_24XX_KBR1,
+        V18_24XX_KBR2,
+        M21_24XX_KBR3,
+        E5__24XX_KBR4,
+        M18_24XX_KBR5,
+        R20_24XX_KBC0,
+        M14_24XX_KBC1,
+        H19_24XX_KBC2,
+        V17_24XX_KBC3,
+        P21_24XX_KBC4,
+        L14_24XX_KBC5,
+        N19_24XX_KBC6,
+
+        /* 24xx Menelaus Keypad GPIO */
+        B3__24XX_KBR5,
+        AA4_24XX_KBC2,
+        B13_24XX_KBC6,
+
+        /* 2430 USB */
+        AD9_2430_USB0_PUEN,
+        Y11_2430_USB0_VP,
+        AD7_2430_USB0_VM,
+        AE7_2430_USB0_RCV,
+        AD4_2430_USB0_TXEN,
+        AF9_2430_USB0_SE0,
+        AE6_2430_USB0_DAT,
+        AD24_2430_USB1_SE0,
+        AB24_2430_USB1_RCV,
+        Y25_2430_USB1_TXEN,
+        AA26_2430_USB1_DAT,
+
+        /* 2430 HS-USB */
+        AD9_2430_USB0HS_DATA3,
+        Y11_2430_USB0HS_DATA4,
+        AD7_2430_USB0HS_DATA5,
+        AE7_2430_USB0HS_DATA6,
+        AD4_2430_USB0HS_DATA2,
+        AF9_2430_USB0HS_DATA0,
+        AE6_2430_USB0HS_DATA1,
+        AE8_2430_USB0HS_CLK,
+        AD8_2430_USB0HS_DIR,
+        AE5_2430_USB0HS_STP,
+        AE9_2430_USB0HS_NXT,
+        AC7_2430_USB0HS_DATA7,
+
+        /* 2430 McBSP */
+        AC10_2430_MCBSP2_FSX,
+        AD16_2430_MCBSP2_CLX,
+        AE13_2430_MCBSP2_DX,
+        AD13_2430_MCBSP2_DR,
+        AC10_2430_MCBSP2_FSX_OFF,
+        AD16_2430_MCBSP2_CLX_OFF,
+        AE13_2430_MCBSP2_DX_OFF,
+        AD13_2430_MCBSP2_DR_OFF,
+
+};
+
+struct omap_mux_cfg {
+        struct pin_config       *pins;
+        unsigned long           size;
+        int                     (*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef  CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap2_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap2_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/mach/nand.h
new file mode 100644
index 000000000000..631a7bed1eef
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/nand.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/mach/nand.h
+ *
+ * Copyright (C) 2006 Micron Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/partitions.h>
+
+struct omap_nand_platform_data {
+        unsigned int            options;
+        int                     cs;
+        int                     gpio_irq;
+        struct mtd_partition    *parts;
+        int                     nr_parts;
+        int                     (*nand_setup)(void __iomem *);
+        int                     (*dev_ready)(struct omap_nand_platform_data *);
+        int                     dma_channel;
+        void __iomem            *gpmc_cs_baseaddr;
+        void __iomem            *gpmc_baseaddr;
+};
diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/mach/omap-alsa.h
new file mode 100644
index 000000000000..bdf30a0f87f2
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap-alsa.h
@@ -0,0 +1,123 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap-alsa.h
+ *
+ * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
+ *
+ * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
+ *
+ * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
+ * Written by Daniel Petrini, David Cohen, Anderson Briglia
+ *            {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History
+ *  -------
+ *
+ *  2005/07/25 INdT-10LE Kernel Team -  Alsa driver for omap osk,
+ *                                      original version based in sa1100 driver
+ *                                      and omap oss driver.
+ */
+
+#ifndef __OMAP_ALSA_H
+#define __OMAP_ALSA_H
+
+#include <mach/dma.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <mach/mcbsp.h>
+#include <linux/platform_device.h>
+
+#define DMA_BUF_SIZE    (1024 * 8)
+
+/*
+ * Buffer management for alsa and dma
+ */
+struct audio_stream {
+        char *id;               /* identification string */
+        int stream_id;          /* numeric identification */
+        int dma_dev;            /* dma number of that device */
+        int *lch;               /* Chain of channels this stream is linked to */
+        char started;           /* to store if the chain was started or not */
+        int dma_q_head;         /* DMA Channel Q Head */
+        int dma_q_tail;         /* DMA Channel Q Tail */
+        char dma_q_count;       /* DMA Channel Q Count */
+        int active:1;           /* we are using this stream for transfer now */
+        int period;             /* current transfer period */
+        int periods;            /* current count of periods registerd in the DMA engine */
+        spinlock_t dma_lock;    /* for locking in DMA operations */
+        struct snd_pcm_substream *stream;       /* the pcm stream */
+        unsigned linked:1;      /* dma channels linked */
+        int offset;             /* store start position of the last period in the alsa buffer */
+        int (*hw_start)(void);  /* interface to start HW interface, e.g. McBSP */
+        int (*hw_stop)(void);   /* interface to stop HW interface, e.g. McBSP */
+};
+
+/*
+ * Alsa card structure for aic23
+ */
+struct snd_card_omap_codec {
+        struct snd_card *card;
+        struct snd_pcm *pcm;
+        long samplerate;
+        struct audio_stream s[2];       /* playback & capture */
+};
+
+/* Codec specific information and function pointers.
+ * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
+ * are responsible for defining the function pointers.
+ */
+struct omap_alsa_codec_config {
+        char    *name;
+        struct  omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
+        struct  snd_pcm_hw_constraint_list *hw_constraints_rates;
+        struct  snd_pcm_hardware *snd_omap_alsa_playback;
+        struct  snd_pcm_hardware *snd_omap_alsa_capture;
+        void    (*codec_configure_dev)(void);
+        void    (*codec_set_samplerate)(long);
+        void    (*codec_clock_setup)(void);
+        int     (*codec_clock_on)(void);
+        int     (*codec_clock_off)(void);
+        int     (*get_default_samplerate)(void);
+};
+
+/*********** Mixer function prototypes *************************/
+int snd_omap_mixer(struct snd_card_omap_codec *);
+void snd_omap_init_mixer(void);
+
+#ifdef CONFIG_PM
+void snd_omap_suspend_mixer(void);
+void snd_omap_resume_mixer(void);
+#endif
+
+int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
+int snd_omap_alsa_remove(struct platform_device *pdev);
+#ifdef CONFIG_PM
+int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
+int snd_omap_alsa_resume(struct platform_device *pdev);
+#else
+#define snd_omap_alsa_suspend   NULL
+#define snd_omap_alsa_resume    NULL
+#endif
+
+void callback_omap_alsa_sound_dma(void *);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
new file mode 100644
index 000000000000..505a38af8b22
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -0,0 +1,48 @@
+/* arch/arm/plat-omap/include/mach/omap1510.h
+ *
+ * Hardware definitions for TI OMAP1510 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP1510_DSP_BASE       0xE0000000
+#define OMAP1510_DSP_SIZE       0x28000
+#define OMAP1510_DSP_START      0xE0000000
+
+#define OMAP1510_DSPREG_BASE    0xE1000000
+#define OMAP1510_DSPREG_SIZE    SZ_128K
+#define OMAP1510_DSPREG_START   0xE1000000
+
+#endif /*  __ASM_ARCH_OMAP15XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
new file mode 100644
index 000000000000..c6c93afb2788
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -0,0 +1,197 @@
+/* arch/arm/plat-omap/include/mach/omap16xx.h
+ *
+ * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP16XX_H
+#define __ASM_ARCH_OMAP16XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP16XX_DSP_BASE       0xE0000000
+#define OMAP16XX_DSP_SIZE       0x28000
+#define OMAP16XX_DSP_START      0xE0000000
+
+#define OMAP16XX_DSPREG_BASE    0xE1000000
+#define OMAP16XX_DSPREG_SIZE    SZ_128K
+#define OMAP16XX_DSPREG_START   0xE1000000
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH2_0_BASE         (0xfffe0000)
+#define OMAP_IH2_1_BASE         (0xfffe0100)
+#define OMAP_IH2_2_BASE         (0xfffe0200)
+#define OMAP_IH2_3_BASE         (0xfffe0300)
+
+#define OMAP_IH2_0_ITR          (OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR          (OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ      (OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ      (OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL      (OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0         (OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR          (OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR          (OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR          (OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ      (OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ      (OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL      (OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1         (OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR          (OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR          (OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR          (OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ      (OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ      (OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL      (OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2         (OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR          (OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR          (OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR          (OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ      (OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ      (OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL      (OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3         (OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR          (OMAP_IH2_3_BASE + 0x9c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_ARM_IDLECT3    (CLKGEN_REG_BASE + 0x24)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV6   (1 << 8)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV7   (1 << 9)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV8   (1 << 10)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV9   (1 << 11)
+#define OMAP16XX_SUBLVDS_CONF_VALID     (1 << 13)
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP1610_RESET_CONTROL  0xfffe1140
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_SWITCH_BASE                 (0xfffbc800)
+#define OMAP16XX_MMCSD2_SSW_MPU_CONF    (TIPB_SWITCH_BASE + 0x160)
+
+/* UART3 Registers Maping through MPU bus */
+#define UART3_RHR               (OMAP_UART3_BASE + 0)
+#define UART3_THR               (OMAP_UART3_BASE + 0)
+#define UART3_DLL               (OMAP_UART3_BASE + 0)
+#define UART3_IER               (OMAP_UART3_BASE + 4)
+#define UART3_DLH               (OMAP_UART3_BASE + 4)
+#define UART3_IIR               (OMAP_UART3_BASE + 8)
+#define UART3_FCR               (OMAP_UART3_BASE + 8)
+#define UART3_EFR               (OMAP_UART3_BASE + 8)
+#define UART3_LCR               (OMAP_UART3_BASE + 0x0C)
+#define UART3_MCR               (OMAP_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1        (OMAP_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2        (OMAP_UART3_BASE + 0x14)
+#define UART3_LSR               (OMAP_UART3_BASE + 0x14)
+#define UART3_TCR               (OMAP_UART3_BASE + 0x18)
+#define UART3_MSR               (OMAP_UART3_BASE + 0x18)
+#define UART3_XOFF1             (OMAP_UART3_BASE + 0x18)
+#define UART3_XOFF2             (OMAP_UART3_BASE + 0x1C)
+#define UART3_SPR               (OMAP_UART3_BASE + 0x1C)
+#define UART3_TLR               (OMAP_UART3_BASE + 0x1C)
+#define UART3_MDR1              (OMAP_UART3_BASE + 0x20)
+#define UART3_MDR2              (OMAP_UART3_BASE + 0x24)
+#define UART3_SFLSR             (OMAP_UART3_BASE + 0x28)
+#define UART3_TXFLL             (OMAP_UART3_BASE + 0x28)
+#define UART3_RESUME            (OMAP_UART3_BASE + 0x2C)
+#define UART3_TXFLH             (OMAP_UART3_BASE + 0x2C)
+#define UART3_SFREGL            (OMAP_UART3_BASE + 0x30)
+#define UART3_RXFLL             (OMAP_UART3_BASE + 0x30)
+#define UART3_SFREGH            (OMAP_UART3_BASE + 0x34)
+#define UART3_RXFLH             (OMAP_UART3_BASE + 0x34)
+#define UART3_BLR               (OMAP_UART3_BASE + 0x38)
+#define UART3_ACREG             (OMAP_UART3_BASE + 0x3C)
+#define UART3_DIV16             (OMAP_UART3_BASE + 0x3C)
+#define UART3_SCR               (OMAP_UART3_BASE + 0x40)
+#define UART3_SSR               (OMAP_UART3_BASE + 0x44)
+#define UART3_EBLR              (OMAP_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL       (OMAP_UART3_BASE + 0x4C)
+#define UART3_MVR               (OMAP_UART3_BASE + 0x50)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* 32-bit Watchdog timer in OMAP 16XX */
+#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
+#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
+#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
+#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
+#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
+#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
+#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
+#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
+#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
+#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
+
+#define WCLR_PRE_SHIFT         5
+#define WCLR_PTV_SHIFT         2
+
+#define WWPS_W_PEND_WSPR       (1 << 4)
+#define WWPS_W_PEND_WTGR       (1 << 3)
+#define WWPS_W_PEND_WLDR       (1 << 2)
+#define WWPS_W_PEND_WCRR       (1 << 1)
+#define WWPS_W_PEND_WCLR       (1 << 0)
+
+#define WSPR_ENABLE_0          (0x0000bbbb)
+#define WSPR_ENABLE_1          (0x00004444)
+#define WSPR_DISABLE_0         (0x0000aaaa)
+#define WSPR_DISABLE_1         (0x00005555)
+
+/* Mailbox */
+#define OMAP16XX_MAILBOX_BASE   (0xfffcf000)
+
+#endif /*  __ASM_ARCH_OMAP16XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
new file mode 100644
index 000000000000..bb8319d66e9f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -0,0 +1,107 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap24xx.h
+ *
+ * This file contains the processor specific definitions
+ * of the TI OMAP24XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP24XX_H
+#define __ASM_ARCH_OMAP24XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers. Note also that some of these defines are needed
+ * for omap1 to compile without adding ifdefs.
+ */
+
+#define L4_24XX_BASE            0x48000000
+#define L4_WK_243X_BASE         0x49000000
+#define L3_24XX_BASE            0x68000000
+
+/* interrupt controller */
+#define OMAP24XX_IC_BASE        (L4_24XX_BASE + 0xfe000)
+#define OMAP24XX_IVA_INTC_BASE  0x40000000
+#define IRQ_SIR_IRQ             0x0040
+
+#define OMAP2420_CTRL_BASE      L4_24XX_BASE
+#define OMAP2420_32KSYNCT_BASE  (L4_24XX_BASE + 0x4000)
+#define OMAP2420_PRCM_BASE      (L4_24XX_BASE + 0x8000)
+#define OMAP2420_CM_BASE        (L4_24XX_BASE + 0x8000)
+#define OMAP2420_PRM_BASE       OMAP2420_CM_BASE
+#define OMAP2420_SDRC_BASE      (L3_24XX_BASE + 0x9000)
+#define OMAP2420_SMS_BASE       0x68008000
+
+#define OMAP2430_32KSYNCT_BASE  (L4_WK_243X_BASE + 0x20000)
+#define OMAP2430_PRCM_BASE      (L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_CM_BASE        (L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_PRM_BASE       OMAP2430_CM_BASE
+
+#define OMAP243X_SMS_BASE       0x6C000000
+#define OMAP243X_SDRC_BASE      0x6D000000
+#define OMAP243X_GPMC_BASE      0x6E000000
+#define OMAP243X_SCM_BASE       (L4_WK_243X_BASE + 0x2000)
+#define OMAP243X_CTRL_BASE      OMAP243X_SCM_BASE
+#define OMAP243X_HS_BASE        (L4_24XX_BASE + 0x000ac000)
+
+/* DSP SS */
+#define OMAP2420_DSP_BASE       0x58000000
+#define OMAP2420_DSP_MEM_BASE   (OMAP2420_DSP_BASE + 0x0)
+#define OMAP2420_DSP_IPI_BASE   (OMAP2420_DSP_BASE + 0x1000000)
+#define OMAP2420_DSP_MMU_BASE   (OMAP2420_DSP_BASE + 0x2000000)
+
+#define OMAP243X_DSP_BASE       0x5C000000
+#define OMAP243X_DSP_MEM_BASE   (OMAP243X_DSP_BASE + 0x0)
+#define OMAP243X_DSP_MMU_BASE   (OMAP243X_DSP_BASE + 0x1000000)
+
+/* Mailbox */
+#define OMAP24XX_MAILBOX_BASE   (L4_24XX_BASE + 0x94000)
+
+/* Camera */
+#define OMAP24XX_CAMERA_BASE    (L4_24XX_BASE + 0x52000)
+
+/* Security */
+#define OMAP24XX_SEC_BASE       (L4_24XX_BASE + 0xA0000)
+#define OMAP24XX_SEC_RNG_BASE   (OMAP24XX_SEC_BASE + 0x0000)
+#define OMAP24XX_SEC_DES_BASE   (OMAP24XX_SEC_BASE + 0x2000)
+#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
+#define OMAP24XX_SEC_AES_BASE   (OMAP24XX_SEC_BASE + 0x6000)
+#define OMAP24XX_SEC_PKA_BASE   (OMAP24XX_SEC_BASE + 0x8000)
+
+#if defined(CONFIG_ARCH_OMAP2420)
+
+#define OMAP2_32KSYNCT_BASE     OMAP2420_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE         OMAP2420_PRCM_BASE
+#define OMAP2_CM_BASE           OMAP2420_CM_BASE
+#define OMAP2_PRM_BASE          OMAP2420_PRM_BASE
+#define OMAP2_VA_IC_BASE        IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#elif defined(CONFIG_ARCH_OMAP2430)
+
+#define OMAP2_32KSYNCT_BASE     OMAP2430_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE         OMAP2430_PRCM_BASE
+#define OMAP2_CM_BASE           OMAP2430_CM_BASE
+#define OMAP2_PRM_BASE          OMAP2430_PRM_BASE
+#define OMAP2_VA_IC_BASE        IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#endif
+
+#endif /* __ASM_ARCH_OMAP24XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
new file mode 100644
index 000000000000..8e0479fff05a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -0,0 +1,72 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap34xx.h
+ *
+ * This file contains the processor specific definitions of the TI OMAP34XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_OMAP34XX_H
+#define __ASM_ARCH_OMAP34XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+
+#define L4_34XX_BASE            0x48000000
+#define L4_WK_34XX_BASE         0x48300000
+#define L4_WK_OMAP_BASE         L4_WK_34XX_BASE
+#define L4_PER_34XX_BASE        0x49000000
+#define L4_PER_OMAP_BASE        L4_PER_34XX_BASE
+#define L4_EMU_34XX_BASE        0x54000000
+#define L4_EMU_BASE             L4_EMU_34XX_BASE
+#define L3_34XX_BASE            0x68000000
+#define L3_OMAP_BASE            L3_34XX_BASE
+
+#define OMAP3430_32KSYNCT_BASE  0x48320000
+#define OMAP3430_CM_BASE        0x48004800
+#define OMAP3430_PRM_BASE       0x48306800
+#define OMAP343X_SMS_BASE       0x6C000000
+#define OMAP343X_SDRC_BASE      0x6D000000
+#define OMAP34XX_GPMC_BASE      0x6E000000
+#define OMAP343X_SCM_BASE       0x48002000
+#define OMAP343X_CTRL_BASE      OMAP343X_SCM_BASE
+
+#define OMAP34XX_IC_BASE        0x48200000
+#define OMAP34XX_IVA_INTC_BASE  0x40000000
+#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
+#define OMAP34XX_HSUSB_HOST_BASE        (L4_34XX_BASE + 0x64000)
+#define OMAP34XX_USBTLL_BASE    (L4_34XX_BASE + 0x62000)
+
+
+#if defined(CONFIG_ARCH_OMAP3430)
+
+#define OMAP2_32KSYNCT_BASE             OMAP3430_32KSYNCT_BASE
+#define OMAP2_CM_BASE                   OMAP3430_CM_BASE
+#define OMAP2_PRM_BASE                  OMAP3430_PRM_BASE
+#define OMAP2_VA_IC_BASE                IO_ADDRESS(OMAP34XX_IC_BASE)
+
+#endif
+
+#define OMAP34XX_DSP_BASE       0x58000000
+#define OMAP34XX_DSP_MEM_BASE   (OMAP34XX_DSP_BASE + 0x0)
+#define OMAP34XX_DSP_IPI_BASE   (OMAP34XX_DSP_BASE + 0x1000000)
+#define OMAP34XX_DSP_MMU_BASE   (OMAP34XX_DSP_BASE + 0x2000000)
+#endif /* __ASM_ARCH_OMAP34XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/mach/omap730.h
new file mode 100644
index 000000000000..14272bc1a6fd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap730.h
@@ -0,0 +1,102 @@
+/* arch/arm/plat-omap/include/mach/omap730.h
+ *
+ * Hardware definitions for TI OMAP730 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP730_H
+#define __ASM_ARCH_OMAP730_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP730_DSP_BASE        0xE0000000
+#define OMAP730_DSP_SIZE        0x50000
+#define OMAP730_DSP_START       0xE0000000
+
+#define OMAP730_DSPREG_BASE     0xE1000000
+#define OMAP730_DSPREG_SIZE     SZ_128K
+#define OMAP730_DSPREG_START    0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_CONFIG_BASE     0xfffe1000
+#define OMAP730_IO_CONF_0       0xfffe1070
+#define OMAP730_IO_CONF_1       0xfffe1074
+#define OMAP730_IO_CONF_2       0xfffe1078
+#define OMAP730_IO_CONF_3       0xfffe107c
+#define OMAP730_IO_CONF_4       0xfffe1080
+#define OMAP730_IO_CONF_5       0xfffe1084
+#define OMAP730_IO_CONF_6       0xfffe1088
+#define OMAP730_IO_CONF_7       0xfffe108c
+#define OMAP730_IO_CONF_8       0xfffe1090
+#define OMAP730_IO_CONF_9       0xfffe1094
+#define OMAP730_IO_CONF_10      0xfffe1098
+#define OMAP730_IO_CONF_11      0xfffe109c
+#define OMAP730_IO_CONF_12      0xfffe10a0
+#define OMAP730_IO_CONF_13      0xfffe10a4
+
+#define OMAP730_MODE_1          0xfffe1010
+#define OMAP730_MODE_2          0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP730_MODE2_OFFSET    0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_FLASH_CFG_0     0xfffecc10
+#define OMAP730_FLASH_ACFG_0    0xfffecc50
+#define OMAP730_FLASH_CFG_1     0xfffecc14
+#define OMAP730_FLASH_ACFG_1    0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_ICR_BASE        0xfffbb800
+#define OMAP730_DSP_M_CTL       0xfffbb804
+#define OMAP730_DSP_MMU_BASE    0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_PCC_UPLD_CTRL_BASE      (0xfffe0900)
+#define OMAP730_PCC_UPLD_CTRL           (OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP730_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
new file mode 100644
index 000000000000..cae037d13079
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -0,0 +1,395 @@
+/*
+ * File: arch/arm/plat-omap/include/mach/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAPFB_H
+#define __OMAPFB_H
+
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)    _IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)    _IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)   _IOWR('O', num, dtype)
+#define OMAP_IO(num)            _IO('O', num)
+
+#define OMAPFB_MIRROR           OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX         OMAP_IO(37)
+#define OMAPFB_VSYNC            OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE  OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS         OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE  OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST         OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST        OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY    OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY    OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE      OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE      OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW    OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM        OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM        OMAP_IOW(56, struct omapfb_mem_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK        0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK           0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK          0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE       0x00001000
+#define OMAPFB_CAPS_TEARSYNC            0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM  0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE         0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE        0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY      0x00040000
+#define OMAPFB_CAPS_SET_BACKLIGHT       0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK              0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE       0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC     0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC  0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY       0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY      0x1000
+
+#define OMAPFB_EVENT_READY      1
+#define OMAPFB_EVENT_DISABLED   2
+
+#define OMAPFB_MEMTYPE_SDRAM            0
+#define OMAPFB_MEMTYPE_SRAM             1
+#define OMAPFB_MEMTYPE_MAX              1
+
+enum omapfb_color_format {
+        OMAPFB_COLOR_RGB565 = 0,
+        OMAPFB_COLOR_YUV422,
+        OMAPFB_COLOR_YUV420,
+        OMAPFB_COLOR_CLUT_8BPP,
+        OMAPFB_COLOR_CLUT_4BPP,
+        OMAPFB_COLOR_CLUT_2BPP,
+        OMAPFB_COLOR_CLUT_1BPP,
+        OMAPFB_COLOR_RGB444,
+        OMAPFB_COLOR_YUY422,
+};
+
+struct omapfb_update_window {
+        __u32 x, y;
+        __u32 width, height;
+        __u32 format;
+        __u32 out_x, out_y;
+        __u32 out_width, out_height;
+        __u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+        __u32 x, y;
+        __u32 width, height;
+        __u32 format;
+};
+
+enum omapfb_plane {
+        OMAPFB_PLANE_GFX = 0,
+        OMAPFB_PLANE_VID1,
+        OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+        OMAPFB_CHANNEL_OUT_LCD = 0,
+        OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+        __u32 pos_x;
+        __u32 pos_y;
+        __u8  enabled;
+        __u8  channel_out;
+        __u8  mirror;
+        __u8  reserved1;
+        __u32 out_width;
+        __u32 out_height;
+        __u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+        __u32 size;
+        __u8  type;
+        __u8  reserved[3];
+};
+
+struct omapfb_caps {
+        __u32 ctrl;
+        __u32 plane_color;
+        __u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+        OMAPFB_COLOR_KEY_DISABLED = 0,
+        OMAPFB_COLOR_KEY_GFX_DST,
+        OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+        __u8  channel_out;
+        __u32 background;
+        __u32 trans_key;
+        __u8  key_type;
+};
+
+enum omapfb_update_mode {
+        OMAPFB_UPDATE_DISABLED = 0,
+        OMAPFB_AUTO_UPDATE,
+        OMAPFB_MANUAL_UPDATE
+};
+
+#ifdef __KERNEL__
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/mutex.h>
+
+#include <mach/board.h>
+
+#define OMAP_LCDC_INV_VSYNC             0x0001
+#define OMAP_LCDC_INV_HSYNC             0x0002
+#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
+#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
+#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
+#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
+
+#define OMAP_LCDC_SIGNAL_MASK           0x003f
+
+#define OMAP_LCDC_PANEL_TFT             0x0100
+
+#define OMAPFB_PLANE_XRES_MIN           8
+#define OMAPFB_PLANE_YRES_MIN           8
+
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM                1
+#else
+#define OMAPFB_PLANE_NUM                3
+#endif
+
+struct omapfb_device;
+
+struct lcd_panel {
+        const char      *name;
+        int             config;         /* TFT/STN, signal inversion */
+        int             bpp;            /* Pixel format in fb mem */
+        int             data_lines;     /* Lines on LCD HW interface */
+
+        int             x_res, y_res;
+        int             pixel_clock;    /* In kHz */
+        int             hsw;            /* Horizontal synchronization
+                                           pulse width */
+        int             hfp;            /* Horizontal front porch */
+        int             hbp;            /* Horizontal back porch */
+        int             vsw;            /* Vertical synchronization
+                                           pulse width */
+        int             vfp;            /* Vertical front porch */
+        int             vbp;            /* Vertical back porch */
+        int             acb;            /* ac-bias pin frequency */
+        int             pcd;            /* pixel clock divider.
+                                           Obsolete use pixel_clock instead */
+
+        int             (*init)         (struct lcd_panel *panel,
+                                         struct omapfb_device *fbdev);
+        void            (*cleanup)      (struct lcd_panel *panel);
+        int             (*enable)       (struct lcd_panel *panel);
+        void            (*disable)      (struct lcd_panel *panel);
+        unsigned long   (*get_caps)     (struct lcd_panel *panel);
+        int             (*set_bklight_level)(struct lcd_panel *panel,
+                                             unsigned int level);
+        unsigned int    (*get_bklight_level)(struct lcd_panel *panel);
+        unsigned int    (*get_bklight_max)  (struct lcd_panel *panel);
+        int             (*run_test)     (struct lcd_panel *panel, int test_num);
+};
+
+struct extif_timings {
+        int cs_on_time;
+        int cs_off_time;
+        int we_on_time;
+        int we_off_time;
+        int re_on_time;
+        int re_off_time;
+        int we_cycle_time;
+        int re_cycle_time;
+        int cs_pulse_width;
+        int access_time;
+
+        int clk_div;
+
+        u32 tim[5];             /* set by extif->convert_timings */
+
+        int converted;
+};
+
+struct lcd_ctrl_extif {
+        int  (*init)            (struct omapfb_device *fbdev);
+        void (*cleanup)         (void);
+        void (*get_clk_info)    (u32 *clk_period, u32 *max_clk_div);
+        unsigned long (*get_max_tx_rate)(void);
+        int  (*convert_timings) (struct extif_timings *timings);
+        void (*set_timings)     (const struct extif_timings *timings);
+        void (*set_bits_per_cycle)(int bpc);
+        void (*write_command)   (const void *buf, unsigned int len);
+        void (*read_data)       (void *buf, unsigned int len);
+        void (*write_data)      (const void *buf, unsigned int len);
+        void (*transfer_area)   (int width, int height,
+                                 void (callback)(void * data), void *data);
+        int  (*setup_tearsync)  (unsigned pin_cnt,
+                                 unsigned hs_pulse_time, unsigned vs_pulse_time,
+                                 int hs_pol_inv, int vs_pol_inv, int div);
+        int  (*enable_tearsync) (int enable, unsigned line);
+
+        unsigned long           max_transmit_size;
+};
+
+struct omapfb_notifier_block {
+        struct notifier_block   nb;
+        void                    *data;
+        int                     plane_idx;
+};
+
+typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
+                                          unsigned long event,
+                                          void *fbi);
+
+struct omapfb_mem_region {
+        dma_addr_t      paddr;
+        void            *vaddr;
+        unsigned long   size;
+        u8              type;           /* OMAPFB_PLANE_MEM_* */
+        unsigned        alloc:1;        /* allocated by the driver */
+        unsigned        map:1;          /* kernel mapped by the driver */
+};
+
+struct omapfb_mem_desc {
+        int                             region_cnt;
+        struct omapfb_mem_region        region[OMAPFB_PLANE_NUM];
+};
+
+struct lcd_ctrl {
+        const char      *name;
+        void            *data;
+
+        int             (*init)           (struct omapfb_device *fbdev,
+                                           int ext_mode,
+                                           struct omapfb_mem_desc *req_md);
+        void            (*cleanup)        (void);
+        void            (*bind_client)    (struct omapfb_notifier_block *nb);
+        void            (*get_caps)       (int plane, struct omapfb_caps *caps);
+        int             (*set_update_mode)(enum omapfb_update_mode mode);
+        enum omapfb_update_mode (*get_update_mode)(void);
+        int             (*setup_plane)    (int plane, int channel_out,
+                                           unsigned long offset,
+                                           int screen_width,
+                                           int pos_x, int pos_y, int width,
+                                           int height, int color_mode);
+        int             (*setup_mem)      (int plane, size_t size,
+                                           int mem_type, unsigned long *paddr);
+        int             (*mmap)           (struct fb_info *info,
+                                           struct vm_area_struct *vma);
+        int             (*set_scale)      (int plane,
+                                           int orig_width, int orig_height,
+                                           int out_width, int out_height);
+        int             (*enable_plane)   (int plane, int enable);
+        int             (*update_window)  (struct fb_info *fbi,
+                                           struct omapfb_update_window *win,
+                                           void (*callback)(void *),
+                                           void *callback_data);
+        void            (*sync)           (void);
+        void            (*suspend)        (void);
+        void            (*resume)         (void);
+        int             (*run_test)       (int test_num);
+        int             (*setcolreg)      (u_int regno, u16 red, u16 green,
+                                           u16 blue, u16 transp,
+                                           int update_hw_mem);
+        int             (*set_color_key)  (struct omapfb_color_key *ck);
+        int             (*get_color_key)  (struct omapfb_color_key *ck);
+};
+
+enum omapfb_state {
+        OMAPFB_DISABLED = 0,
+        OMAPFB_SUSPENDED= 99,
+        OMAPFB_ACTIVE   = 100
+};
+
+struct omapfb_plane_struct {
+        int                             idx;
+        struct omapfb_plane_info        info;
+        enum omapfb_color_format        color_mode;
+        struct omapfb_device            *fbdev;
+};
+
+struct omapfb_device {
+        int                     state;
+        int                     ext_lcdc;               /* Using external
+                                                           LCD controller */
+        struct mutex            rqueue_mutex;
+
+        int                     palette_size;
+        u32                     pseudo_palette[17];
+
+        struct lcd_panel        *panel;                 /* LCD panel */
+        struct lcd_ctrl         *ctrl;                  /* LCD controller */
+        struct lcd_ctrl         *int_ctrl;              /* internal LCD ctrl */
+        struct lcd_ctrl_extif   *ext_if;                /* LCD ctrl external
+                                                           interface */
+        struct device           *dev;
+        struct fb_var_screeninfo        new_var;        /* for mode changes */
+
+        struct omapfb_mem_desc          mem_desc;
+        struct fb_info                  *fb_info[OMAPFB_PLANE_NUM];
+};
+
+struct omapfb_platform_data {
+        struct omap_lcd_config          lcd;
+        struct omapfb_mem_desc          mem_desc;
+        void                            *ctrl_platform_data;
+};
+
+#ifdef CONFIG_ARCH_OMAP1
+extern struct lcd_ctrl omap1_lcd_ctrl;
+#else
+extern struct lcd_ctrl omap2_disp_ctrl;
+#endif
+
+extern void omapfb_register_panel(struct lcd_panel *panel);
+extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+extern void omapfb_notify_clients(struct omapfb_device *fbdev,
+                                  unsigned long event);
+extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
+                                   omapfb_notifier_callback_t callback,
+                                   void *callback_data);
+extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
+extern int  omapfb_update_window_async(struct fb_info *fbi,
+                                       struct omapfb_update_window *win,
+                                       void (*callback)(void *),
+                                       void *callback_data);
+
+/* in arch/arm/plat-omap/fb.c */
+extern void omapfb_set_ctrl_platform_data(void *pdata);
+
+#endif /* __KERNEL__ */
+
+#endif /* __OMAPFB_H */
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
new file mode 100644
index 000000000000..d57f20226b28
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-omap/include/mach/onenand.h
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/partitions.h>
+
+struct omap_onenand_platform_data {
+        int                     cs;
+        int                     gpio_irq;
+        struct mtd_partition    *parts;
+        int                     nr_parts;
+        int                     (*onenand_setup)(void __iomem *);
+        int                     dma_channel;
+};
diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/mach/param.h
new file mode 100644
index 000000000000..1eb4dc326979
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/param.h
@@ -0,0 +1,8 @@
+/*
+ *  arch/arm/plat-omap/include/mach/param.h
+ *
+ */
+
+#ifdef CONFIG_OMAP_32K_TIMER_HZ
+#define HZ      CONFIG_OMAP_32K_TIMER_HZ
+#endif
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
new file mode 100644
index 000000000000..bfa09325a5ff
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -0,0 +1,356 @@
+/*
+ * arch/arm/plat-omap/include/mach/pm.h
+ *
+ * Header file for OMAP Power Management Routines
+ *
+ * Author: MontaVista Software, Inc.
+ *         support@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_PM_H
+#define __ASM_ARCH_OMAP_PM_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Register and offset definitions to be used in PM assembler code
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_ASM_BASE             io_p2v(0xfffece00)
+#define ARM_IDLECT1_ASM_OFFSET          0x04
+#define ARM_IDLECT2_ASM_OFFSET          0x08
+
+#define TCMIF_ASM_BASE                  io_p2v(0xfffecc00)
+#define EMIFS_CONFIG_ASM_OFFSET         0x0c
+#define EMIFF_SDRAM_CONFIG_ASM_OFFSET   0x20
+
+/*
+ * ----------------------------------------------------------------------------
+ * Power management bitmasks
+ * ----------------------------------------------------------------------------
+ */
+#define IDLE_WAIT_CYCLES                0x00000fff
+#define PERIPHERAL_ENABLE               0x2
+
+#define SELF_REFRESH_MODE               0x0c000001
+#define IDLE_EMIFS_REQUEST              0xc
+#define MODEM_32K_EN                    0x1
+#define PER_EN                          0x1
+
+#define CPU_SUSPEND_SIZE                200
+#define ULPD_LOW_PWR_EN                 0x0001
+#define ULPD_DEEP_SLEEP_TRANSITION_EN   0x0010
+#define ULPD_SETUP_ANALOG_CELL_3_VAL    0
+#define ULPD_POWER_CTRL_REG_VAL         0x0219
+
+#define DSP_IDLE_DELAY                  10
+#define DSP_IDLE                        0x0040
+#define DSP_RST                         0x0004
+#define DSP_ENABLE                      0x0002
+#define SUFFICIENT_DSP_RESET_TIME       1000
+#define DEFAULT_MPUI_CONFIG             0x05cf
+#define ENABLE_XORCLK                   0x2
+#define DSP_CLOCK_ENABLE                0x2000
+#define DSP_IDLE_MODE                   0x2
+#define TC_IDLE_REQUEST                 (0x0000000c)
+
+#define IRQ_LEVEL2                      (1<<0)
+#define IRQ_KEYBOARD                    (1<<1)
+#define IRQ_UART2                       (1<<15)
+
+#define PDE_BIT                         0x08
+#define PWD_EN_BIT                      0x04
+#define EN_PERCK_BIT                    0x04
+
+#define OMAP1510_DEEP_SLEEP_REQUEST     0x0ec7
+#define OMAP1510_BIG_SLEEP_REQUEST      0x0cc5
+#define OMAP1510_IDLE_LOOP_REQUEST      0x0c00
+#define OMAP1510_IDLE_CLOCK_DOMAINS     0x2
+
+/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
+#define OMAP1610_IDLECT1_SLEEP_VAL      0x13c7
+#define OMAP1610_IDLECT2_SLEEP_VAL      0x09c7
+#define OMAP1610_IDLECT3_VAL            0x3f
+#define OMAP1610_IDLECT3_SLEEP_ORMASK   0x2c
+#define OMAP1610_IDLECT3                0xfffece24
+#define OMAP1610_IDLE_LOOP_REQUEST      0x0400
+
+#define OMAP730_IDLECT1_SLEEP_VAL       0x16c7
+#define OMAP730_IDLECT2_SLEEP_VAL       0x09c7
+#define OMAP730_IDLECT3_VAL             0x3f
+#define OMAP730_IDLECT3         0xfffece24
+#define OMAP730_IDLE_LOOP_REQUEST       0x0C00
+
+#if     !defined(CONFIG_ARCH_OMAP730) && \
+        !defined(CONFIG_ARCH_OMAP15XX) && \
+        !defined(CONFIG_ARCH_OMAP16XX) && \
+        !defined(CONFIG_ARCH_OMAP24XX)
+#error "Power management for this processor not implemented yet"
+#endif
+
+#ifndef __ASSEMBLER__
+
+#include <linux/clk.h>
+
+extern void prevent_idle_sleep(void);
+extern void allow_idle_sleep(void);
+
+/**
+ * clk_deny_idle - Prevents the clock from being idled during MPU idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+/**
+ * clk_allow_idle - Counters previous clk_deny_idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+extern void omap_pm_idle(void);
+extern void omap_pm_suspend(void);
+extern void omap730_cpu_suspend(unsigned short, unsigned short);
+extern void omap1510_cpu_suspend(unsigned short, unsigned short);
+extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
+extern void omap730_idle_loop_suspend(void);
+extern void omap1510_idle_loop_suspend(void);
+extern void omap1610_idle_loop_suspend(void);
+extern void omap24xx_idle_loop_suspend(void);
+
+extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap1510_cpu_suspend_sz;
+extern unsigned int omap1610_cpu_suspend_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap730_idle_loop_suspend_sz;
+extern unsigned int omap1510_idle_loop_suspend_sz;
+extern unsigned int omap1610_idle_loop_suspend_sz;
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+extern void omap_serial_wake_trigger(int enable);
+#else
+#define omap_serial_wakeup_init()       {}
+#define omap_serial_wake_trigger(x)     {}
+#endif  /* CONFIG_OMAP_SERIAL_WAKE */
+
+#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
+#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
+#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
+
+#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
+#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
+#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
+
+#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
+#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
+#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
+
+#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
+#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
+
+#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
+#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
+
+#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
+#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
+
+#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
+#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+
+/*
+ * List of global OMAP registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+
+enum arm_save_state {
+        ARM_SLEEP_SAVE_START = 0,
+        /*
+         * MPU control registers 32 bits
+         */
+        ARM_SLEEP_SAVE_ARM_CKCTL,
+        ARM_SLEEP_SAVE_ARM_IDLECT1,
+        ARM_SLEEP_SAVE_ARM_IDLECT2,
+        ARM_SLEEP_SAVE_ARM_IDLECT3,
+        ARM_SLEEP_SAVE_ARM_EWUPCT,
+        ARM_SLEEP_SAVE_ARM_RSTCT1,
+        ARM_SLEEP_SAVE_ARM_RSTCT2,
+        ARM_SLEEP_SAVE_ARM_SYSST,
+        ARM_SLEEP_SAVE_SIZE
+};
+
+enum dsp_save_state {
+        DSP_SLEEP_SAVE_START = 0,
+        /*
+         * DSP registers 16 bits
+         */
+        DSP_SLEEP_SAVE_DSP_IDLECT2,
+        DSP_SLEEP_SAVE_SIZE
+};
+
+enum ulpd_save_state {
+        ULPD_SLEEP_SAVE_START = 0,
+        /*
+         * ULPD registers 16 bits
+         */
+        ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
+        ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
+        ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
+        ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
+        ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
+        ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
+        ULPD_SLEEP_SAVE_SIZE
+};
+
+enum mpui1510_save_state {
+        MPUI1510_SLEEP_SAVE_START = 0,
+        /*
+         * MPUI registers 32 bits
+         */
+        MPUI1510_SLEEP_SAVE_MPUI_CTRL,
+        MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+        MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+        MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
+        MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+        MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
+        MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
+        MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
+#if defined(CONFIG_ARCH_OMAP15XX)
+        MPUI1510_SLEEP_SAVE_SIZE
+#else
+        MPUI1510_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui730_save_state {
+        MPUI730_SLEEP_SAVE_START = 0,
+        /*
+         * MPUI registers 32 bits
+         */
+        MPUI730_SLEEP_SAVE_MPUI_CTRL,
+        MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+        MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+        MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
+        MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+        MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
+        MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
+        MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
+        MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730)
+        MPUI730_SLEEP_SAVE_SIZE
+#else
+        MPUI730_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui1610_save_state {
+        MPUI1610_SLEEP_SAVE_START = 0,
+        /*
+         * MPUI registers 32 bits
+         */
+        MPUI1610_SLEEP_SAVE_MPUI_CTRL,
+        MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+        MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+        MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
+        MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+        MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
+        MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
+        MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
+        MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
+        MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
+        MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
+#if defined(CONFIG_ARCH_OMAP16XX)
+        MPUI1610_SLEEP_SAVE_SIZE
+#else
+        MPUI1610_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum omap24xx_save_state {
+        OMAP24XX_SLEEP_SAVE_START = 0,
+        OMAP24XX_SLEEP_SAVE_INTC_MIR0,
+        OMAP24XX_SLEEP_SAVE_INTC_MIR1,
+        OMAP24XX_SLEEP_SAVE_INTC_MIR2,
+
+        OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
+        OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
+        OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
+        OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
+
+        OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
+        OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
+        OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
+        OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
+        OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
+
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
+        OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
+
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
+        OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
+
+        OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
+        OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
+        OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
+        OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
+        OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
+        OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
+        OMAP24XX_SLEEP_SAVE_GPIO3_OE,
+        OMAP24XX_SLEEP_SAVE_GPIO4_OE,
+        OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
+        OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
+        OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
+        OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
+        OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
+        OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
+        OMAP24XX_SLEEP_SAVE_SIZE
+};
+
+#endif /* ASSEMBLER */
+#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
new file mode 100644
index 000000000000..56eba0fd6f6a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/plat-omap/include/mach/prcm.h
+ *
+ * Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
+#define __ASM_ARM_ARCH_DPM_PRCM_H
+
+u32 omap_prcm_get_reset_sources(void);
+
+#endif
+
+
+
+
+
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
new file mode 100644
index 000000000000..787b7acec546
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -0,0 +1,75 @@
+#ifndef ____ASM_ARCH_SDRC_H
+#define ____ASM_ARCH_SDRC_H
+
+/*
+ * OMAP2/3 SDRC/SMS register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG          0x010
+#define SDRC_DLLA_CTRL          0x060
+#define SDRC_DLLA_STATUS        0x064
+#define SDRC_DLLB_CTRL          0x068
+#define SDRC_DLLB_STATUS        0x06C
+#define SDRC_POWER              0x070
+#define SDRC_MR_0               0x084
+#define SDRC_RFR_CTRL_0         0x0a4
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz    (0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz    (0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz    (0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz    (0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS    (0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+
+#define OMAP242X_SMS_REGADDR(reg)       (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)       (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)       (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG           0x010
+/* REVISIT: fill in other SMS registers here */
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
new file mode 100644
index 000000000000..cc6bfa51ccb5
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/plat-omap/include/mach/serial.h
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#if defined(CONFIG_ARCH_OMAP1)
+/* OMAP1 serial ports */
+#define OMAP_UART1_BASE         0xfffb0000
+#define OMAP_UART2_BASE         0xfffb0800
+#define OMAP_UART3_BASE         0xfffb9800
+#elif defined(CONFIG_ARCH_OMAP2)
+/* OMAP2 serial ports */
+#define OMAP_UART1_BASE         0x4806a000
+#define OMAP_UART2_BASE         0x4806c000
+#define OMAP_UART3_BASE         0x4806e000
+#endif
+
+#define OMAP_MAX_NR_PORTS       3
+#define OMAP1510_BASE_BAUD      (12000000/16)
+#define OMAP16XX_BASE_BAUD      (48000000/16)
+
+#define is_omap_port(p) ({int __ret = 0;                        \
+                        if (p == IO_ADDRESS(OMAP_UART1_BASE) || \
+                            p == IO_ADDRESS(OMAP_UART2_BASE) || \
+                            p == IO_ADDRESS(OMAP_UART3_BASE))   \
+                                __ret = 1;                      \
+                        __ret;                                  \
+                        })
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
new file mode 100644
index 000000000000..e09323449981
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/plat-omap/include/mach/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
+
+extern int __init omap_sram_init(void);
+extern void * omap_sram_push(void * start, unsigned long size);
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+                                u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+                                      u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
+
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+                                                u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+                                                int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+                                                u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+                                                u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+                                                int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+                                                u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
new file mode 100644
index 000000000000..06a28c7b98de
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * Copied from arch/arm/mach-sa1100/include/mach/system.h
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <linux/clk.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+#ifndef CONFIG_MACH_VOICEBLUE
+#define voiceblue_reset()               do {} while (0)
+#endif
+
+extern void omap_prcm_arch_reset(char mode);
+
+static inline void arch_idle(void)
+{
+        cpu_do_idle();
+}
+
+static inline void omap1_arch_reset(char mode)
+{
+        /*
+         * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+         * "Global Software Reset Affects Traffic Controller Frequency".
+         */
+        if (cpu_is_omap5912()) {
+                omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
+                                 DPLL_CTL);
+                omap_writew(0x8, ARM_RSTCT1);
+        }
+
+        if (machine_is_voiceblue())
+                voiceblue_reset();
+        else
+                omap_writew(1, ARM_RSTCT1);
+}
+
+static inline void arch_reset(char mode)
+{
+        if (!cpu_is_omap24xx())
+                omap1_arch_reset(mode);
+        else
+                omap_prcm_arch_reset(mode);
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/mach/tc.h
new file mode 100644
index 000000000000..d2fcd789bb9a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/tc.h
@@ -0,0 +1,106 @@
+/*
+ * arch/arm/plat-omap/include/mach/tc.h
+ *
+ * OMAP Traffic Controller
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_TC_H
+#define __ASM_ARCH_TC_H
+
+#define TCMIF_BASE              0xfffecc00
+#define OMAP_TC_OCPT1_PRIOR     (TCMIF_BASE + 0x00)
+#define OMAP_TC_EMIFS_PRIOR     (TCMIF_BASE + 0x04)
+#define OMAP_TC_EMIFF_PRIOR     (TCMIF_BASE + 0x08)
+#define EMIFS_CONFIG            (TCMIF_BASE + 0x0c)
+#define EMIFS_CS0_CONFIG        (TCMIF_BASE + 0x10)
+#define EMIFS_CS1_CONFIG        (TCMIF_BASE + 0x14)
+#define EMIFS_CS2_CONFIG        (TCMIF_BASE + 0x18)
+#define EMIFS_CS3_CONFIG        (TCMIF_BASE + 0x1c)
+#define EMIFF_SDRAM_CONFIG      (TCMIF_BASE + 0x20)
+#define EMIFF_MRS               (TCMIF_BASE + 0x24)
+#define TC_TIMEOUT1             (TCMIF_BASE + 0x28)
+#define TC_TIMEOUT2             (TCMIF_BASE + 0x2c)
+#define TC_TIMEOUT3             (TCMIF_BASE + 0x30)
+#define TC_ENDIANISM            (TCMIF_BASE + 0x34)
+#define EMIFF_SDRAM_CONFIG_2    (TCMIF_BASE + 0x3c)
+#define EMIF_CFG_DYNAMIC_WS     (TCMIF_BASE + 0x40)
+#define EMIFS_ACS0              (TCMIF_BASE + 0x50)
+#define EMIFS_ACS1              (TCMIF_BASE + 0x54)
+#define EMIFS_ACS2              (TCMIF_BASE + 0x58)
+#define EMIFS_ACS3              (TCMIF_BASE + 0x5c)
+#define OMAP_TC_OCPT2_PRIOR     (TCMIF_BASE + 0xd0)
+
+/* external EMIFS chipselect regions */
+#define OMAP_CS0_PHYS           0x00000000
+#define OMAP_CS0_SIZE           SZ_64M
+
+#define OMAP_CS1_PHYS           0x04000000
+#define OMAP_CS1_SIZE           SZ_64M
+
+#define OMAP_CS1A_PHYS          OMAP_CS1_PHYS
+#define OMAP_CS1A_SIZE          SZ_32M
+
+#define OMAP_CS1B_PHYS          (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
+#define OMAP_CS1B_SIZE          SZ_32M
+
+#define OMAP_CS2_PHYS           0x08000000
+#define OMAP_CS2_SIZE           SZ_64M
+
+#define OMAP_CS2A_PHYS          OMAP_CS2_PHYS
+#define OMAP_CS2A_SIZE          SZ_32M
+
+#define OMAP_CS2B_PHYS          (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
+#define OMAP_CS2B_SIZE          SZ_32M
+
+#define OMAP_CS3_PHYS           0x0c000000
+#define OMAP_CS3_SIZE           SZ_64M
+
+#ifndef __ASSEMBLER__
+
+/* EMIF Slow Interface Configuration Register */
+#define OMAP_EMIFS_CONFIG_FR            (1 << 4)
+#define OMAP_EMIFS_CONFIG_PDE           (1 << 3)
+#define OMAP_EMIFS_CONFIG_PWD_EN        (1 << 2)
+#define OMAP_EMIFS_CONFIG_BM            (1 << 1)
+#define OMAP_EMIFS_CONFIG_WP            (1 << 0)
+
+#define EMIFS_CCS(n)            (EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n)            (EMIFS_ACS0 + (4 * (n)))
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear.  Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0_phys(void)
+{
+        return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+                        ?  OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+        return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+                        ? 0 : OMAP_CS3_PHYS;
+}
+
+#endif  /* __ASSEMBLER__ */
+
+#endif  /* __ASM_ARCH_TC_H */
diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/mach/timex.h
new file mode 100644
index 000000000000..6d35767bc48f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/timex.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-omap/include/mach/timex.h
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author:  Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
+#define __ASM_ARCH_OMAP_TIMEX_H
+
+/*
+ * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
+ * and that's why the CLOCK_TICK_RATE is not 32768.
+ */
+#ifdef CONFIG_OMAP_32K_TIMER
+#define CLOCK_TICK_RATE         (CONFIG_OMAP_32K_TIMER_HZ)
+#else
+#define CLOCK_TICK_RATE         (HZ * 100000UL)
+#endif
+
+#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h
new file mode 100644
index 000000000000..0814c5f210c3
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/uncompress.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <mach/serial.h>
+
+unsigned int system_rev;
+
+#define UART_OMAP_MDR1          0x08    /* mode definition register */
+#define OMAP_ID_730             0x355F
+#define ID_MASK                 0x7fff
+#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
+#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+
+static void putc(int c)
+{
+        volatile u8 * uart = 0;
+        int shift = 2;
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+        return;
+#endif
+
+#ifdef CONFIG_ARCH_OMAP
+#ifdef  CONFIG_OMAP_LL_DEBUG_UART3
+        uart = (volatile u8 *)(OMAP_UART3_BASE);
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
+        uart = (volatile u8 *)(OMAP_UART2_BASE);
+#else
+        uart = (volatile u8 *)(OMAP_UART1_BASE);
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+        /* Determine which serial port to use */
+        do {
+                /* MMU is not on, so cpu_is_omapXXXX() won't work here */
+                unsigned int omap_id = omap_get_id();
+
+                if (omap_id == OMAP_ID_730)
+                        shift = 0;
+
+                if (check_port(uart, shift))
+                        break;
+                /* Silent boot if no serial ports are enabled. */
+                return;
+        } while (0);
+#endif /* CONFIG_ARCH_OMAP1 */
+#endif
+
+        /*
+         * Now, xmit each character
+         */
+        while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+                barrier();
+        uart[UART_TX << shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
new file mode 100644
index 000000000000..a56a610950c2
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -0,0 +1,141 @@
+// include/asm-arm/mach-omap/usb.h
+
+#ifndef __ASM_ARCH_OMAP_USB_H
+#define __ASM_ARCH_OMAP_USB_H
+
+#include <mach/board.h>
+
+/*-------------------------------------------------------------------------*/
+
+#define OMAP1_OTG_BASE                  0xfffb0400
+#define OMAP1_UDC_BASE                  0xfffb4000
+#define OMAP1_OHCI_BASE                 0xfffba000
+
+#define OMAP2_OHCI_BASE                 0x4805e000
+#define OMAP2_UDC_BASE                  0x4805e200
+#define OMAP2_OTG_BASE                  0x4805e300
+
+#ifdef CONFIG_ARCH_OMAP1
+
+#define OTG_BASE                        OMAP1_OTG_BASE
+#define UDC_BASE                        OMAP1_UDC_BASE
+#define OMAP_OHCI_BASE                  OMAP1_OHCI_BASE
+
+#else
+
+#define OTG_BASE                        OMAP2_OTG_BASE
+#define UDC_BASE                        OMAP2_UDC_BASE
+#define OMAP_OHCI_BASE                  OMAP2_OHCI_BASE
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REV                         (OTG_BASE + 0x00)
+#define OTG_SYSCON_1                    (OTG_BASE + 0x04)
+#       define   USB2_TRX_MODE(w)       (((w)>>24)&0x07)
+#       define   USB1_TRX_MODE(w)       (((w)>>20)&0x07)
+#       define   USB0_TRX_MODE(w)       (((w)>>16)&0x07)
+#       define   OTG_IDLE_EN            (1 << 15)
+#       define   HST_IDLE_EN            (1 << 14)
+#       define   DEV_IDLE_EN            (1 << 13)
+#       define   OTG_RESET_DONE         (1 << 2)
+#       define   OTG_SOFT_RESET         (1 << 1)
+#define OTG_SYSCON_2                    (OTG_BASE + 0x08)
+#       define   OTG_EN                 (1 << 31)
+#       define   USBX_SYNCHRO           (1 << 30)
+#       define   OTG_MST16              (1 << 29)
+#       define   SRP_GPDATA             (1 << 28)
+#       define   SRP_GPDVBUS            (1 << 27)
+#       define   SRP_GPUVBUS(w)         (((w)>>24)&0x07)
+#       define   A_WAIT_VRISE(w)        (((w)>>20)&0x07)
+#       define   B_ASE_BRST(w)          (((w)>>16)&0x07)
+#       define   SRP_DPW                (1 << 14)
+#       define   SRP_DATA               (1 << 13)
+#       define   SRP_VBUS               (1 << 12)
+#       define   OTG_PADEN              (1 << 10)
+#       define   HMC_PADEN              (1 << 9)
+#       define   UHOST_EN               (1 << 8)
+#       define   HMC_TLLSPEED           (1 << 7)
+#       define   HMC_TLLATTACH          (1 << 6)
+#       define   OTG_HMC(w)             (((w)>>0)&0x3f)
+#define OTG_CTRL                        (OTG_BASE + 0x0c)
+#       define   OTG_USB2_EN            (1 << 29)
+#       define   OTG_USB2_DP            (1 << 28)
+#       define   OTG_USB2_DM            (1 << 27)
+#       define   OTG_USB1_EN            (1 << 26)
+#       define   OTG_USB1_DP            (1 << 25)
+#       define   OTG_USB1_DM            (1 << 24)
+#       define   OTG_USB0_EN            (1 << 23)
+#       define   OTG_USB0_DP            (1 << 22)
+#       define   OTG_USB0_DM            (1 << 21)
+#       define   OTG_ASESSVLD           (1 << 20)
+#       define   OTG_BSESSEND           (1 << 19)
+#       define   OTG_BSESSVLD           (1 << 18)
+#       define   OTG_VBUSVLD            (1 << 17)
+#       define   OTG_ID                 (1 << 16)
+#       define   OTG_DRIVER_SEL         (1 << 15)
+#       define   OTG_A_SETB_HNPEN       (1 << 12)
+#       define   OTG_A_BUSREQ           (1 << 11)
+#       define   OTG_B_HNPEN            (1 << 9)
+#       define   OTG_B_BUSREQ           (1 << 8)
+#       define   OTG_BUSDROP            (1 << 7)
+#       define   OTG_PULLDOWN           (1 << 5)
+#       define   OTG_PULLUP             (1 << 4)
+#       define   OTG_DRV_VBUS           (1 << 3)
+#       define   OTG_PD_VBUS            (1 << 2)
+#       define   OTG_PU_VBUS            (1 << 1)
+#       define   OTG_PU_ID              (1 << 0)
+#define OTG_IRQ_EN                      (OTG_BASE + 0x10)       /* 16-bit */
+#       define   DRIVER_SWITCH          (1 << 15)
+#       define   A_VBUS_ERR             (1 << 13)
+#       define   A_REQ_TMROUT           (1 << 12)
+#       define   A_SRP_DETECT           (1 << 11)
+#       define   B_HNP_FAIL             (1 << 10)
+#       define   B_SRP_TMROUT           (1 << 9)
+#       define   B_SRP_DONE             (1 << 8)
+#       define   B_SRP_STARTED          (1 << 7)
+#       define   OPRT_CHG               (1 << 0)
+#define OTG_IRQ_SRC                     (OTG_BASE + 0x14)       /* 16-bit */
+        // same bits as in IRQ_EN
+#define OTG_OUTCTRL                     (OTG_BASE + 0x18)       /* 16-bit */
+#       define   OTGVPD                 (1 << 14)
+#       define   OTGVPU                 (1 << 13)
+#       define   OTGPUID                (1 << 12)
+#       define   USB2VDR                (1 << 10)
+#       define   USB2PDEN               (1 << 9)
+#       define   USB2PUEN               (1 << 8)
+#       define   USB1VDR                (1 << 6)
+#       define   USB1PDEN               (1 << 5)
+#       define   USB1PUEN               (1 << 4)
+#       define   USB0VDR                (1 << 2)
+#       define   USB0PDEN               (1 << 1)
+#       define   USB0PUEN               (1 << 0)
+#define OTG_TEST                        (OTG_BASE + 0x20)       /* 16-bit */
+#define OTG_VENDOR_CODE                 (OTG_BASE + 0xfc)       /* 16-bit */
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP1 */
+#define USB_TRANSCEIVER_CTRL            (0xfffe1000 + 0x0064)
+#       define  CONF_USB2_UNI_R         (1 << 8)
+#       define  CONF_USB1_UNI_R         (1 << 7)
+#       define  CONF_USB_PORT0_R(x)     (((x)>>4)&0x7)
+#       define  CONF_USB0_ISOLATE_R     (1 << 3)
+#       define  CONF_USB_PWRDN_DM_R     (1 << 2)
+#       define  CONF_USB_PWRDN_DP_R     (1 << 1)
+
+/* OMAP2 */
+#       define  USB_UNIDIR                      0x0
+#       define  USB_UNIDIR_TLL                  0x1
+#       define  USB_BIDIR                       0x2
+#       define  USB_BIDIR_TLL                   0x3
+#       define  USBTXWRMODEI(port, x)   ((x) << (22 - (port * 2)))
+#       define  USBT2TLL5PI             (1 << 17)
+#       define  USB0PUENACTLOI          (1 << 16)
+#       define  USBSTANDBYCTRL          (1 << 15)
+
+#endif  /* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
new file mode 100644
index 000000000000..dc104cd96197
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/plat-omap/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index ff1413eae0b8..1d7aec1a691a 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -31,7 +31,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/arch/mailbox.h>
+#include <mach/mailbox.h>
 #include "mailbox.h"
 
 static struct omap_mbox *mboxes;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index c7f74064696c..d0844050f2d2 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,8 +24,8 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mcbsp.h>
 
 static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
 
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 6f3f459731c8..847df208c46c 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -28,7 +28,7 @@
 #include <asm/system.h>
 #include <asm/io.h>
 #include <linux/spinlock.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index 005261a4e720..8bdbf979a257 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -33,7 +33,7 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #define OCPI_BASE               0xfffec320
 #define OCPI_FAULT              (OCPI_BASE + 0x00)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 554ee58e1294..ac67eeb6ca6a 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -22,10 +22,10 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/sram.h>
-#include <asm/arch/board.h>
+#include <mach/sram.h>
+#include <mach/board.h>
 
-#include <asm/arch/control.h>
+#include <mach/control.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 359912ffed7f..777485e0636b 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -31,12 +31,12 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
 
 #ifdef CONFIG_ARCH_OMAP1