[PATCH] ARM: 2812/1: OMAP update 7c/11: Move arch-omap to plat-omap

Patch from Tony Lindgren

This patch move common OMAP code from arch-omap to plat-omap
directory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 163 insertions, 0 deletions

diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
new file mode 100644
index 000000000000..cbecd10d0b6c
--- /dev/null
+++ b/arch/arm/plat-omap/mux.c
@@ -0,0 +1,163 @@
+/*
+ * linux/arch/arm/plat-omap/mux.c
+ *
+ * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
+ *
+ * Copyright (C) 2003 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+#define __MUX_C__
+#include <asm/arch/mux.h>
+
+#ifdef CONFIG_OMAP_MUX
+
+/*
+ * Sets the Omap MUX and PULL_DWN registers based on the table
+ */
+int __init_or_module
+omap_cfg_reg(const reg_cfg_t reg_cfg)
+{
+        static DEFINE_SPINLOCK(mux_spin_lock);
+
+        unsigned long flags;
+        reg_cfg_set *cfg;
+        unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
+                pull_orig = 0, pull = 0;
+        unsigned int mask, warn = 0;
+
+        if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) {
+                printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg);
+                return -EINVAL;
+        }
+
+        cfg = &reg_cfg_table[reg_cfg];
+
+        /*
+         * We do a pretty long section here with lock on, but pin muxing
+         * should only happen on driver init for each driver, so it's not time
+         * critical.
+         */
+        spin_lock_irqsave(&mux_spin_lock, flags);
+
+        /* Check the mux register in question */
+        if (cfg->mux_reg) {
+                unsigned        tmp1, tmp2;
+
+                reg_orig = omap_readl(cfg->mux_reg);
+
+                /* The mux registers always seem to be 3 bits long */
+                mask = (0x7 << cfg->mask_offset);
+                tmp1 = reg_orig & mask;
+                reg = reg_orig & ~mask;
+
+                tmp2 = (cfg->mask << cfg->mask_offset);
+                reg |= tmp2;
+
+                if (tmp1 != tmp2)
+                        warn = 1;
+
+                omap_writel(reg, cfg->mux_reg);
+        }
+
+        /* Check for pull up or pull down selection on 1610 */
+        if (!cpu_is_omap1510()) {
+                if (cfg->pu_pd_reg && cfg->pull_val) {
+                        pu_pd_orig = omap_readl(cfg->pu_pd_reg);
+                        mask = 1 << cfg->pull_bit;
+
+                        if (cfg->pu_pd_val) {
+                                if (!(pu_pd_orig & mask))
+                                        warn = 1;
+                                /* Use pull up */
+                                pu_pd = pu_pd_orig | mask;
+                        } else {
+                                if (pu_pd_orig & mask)
+                                        warn = 1;
+                                /* Use pull down */
+                                pu_pd = pu_pd_orig & ~mask;
+                        }
+                        omap_writel(pu_pd, cfg->pu_pd_reg);
+                }
+        }
+
+        /* Check for an associated pull down register */
+        if (cfg->pull_reg) {
+                pull_orig = omap_readl(cfg->pull_reg);
+                mask = 1 << cfg->pull_bit;
+
+                if (cfg->pull_val) {
+                        if (pull_orig & mask)
+                                warn = 1;
+                        /* Low bit = pull enabled */
+                        pull = pull_orig & ~mask;
+                } else {
+                        if (!(pull_orig & mask))
+                                warn = 1;
+                        /* High bit = pull disabled */
+                        pull = pull_orig | mask;
+                }
+
+                omap_writel(pull, cfg->pull_reg);
+        }
+
+        if (warn) {
+#ifdef CONFIG_OMAP_MUX_WARNINGS
+                printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+        }
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+        if (cfg->debug || warn) {
+                printk("MUX: Setting register %s\n", cfg->name);
+                printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+                       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
+
+                if (!cpu_is_omap1510()) {
+                        if (cfg->pu_pd_reg && cfg->pull_val) {
+                                printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+                                       cfg->pu_pd_name, cfg->pu_pd_reg,
+                                       pu_pd_orig, pu_pd);
+                        }
+                }
+
+                if (cfg->pull_reg)
+                        printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+                               cfg->pull_name, cfg->pull_reg, pull_orig, pull);
+        }
+#endif
+
+        spin_unlock_irqrestore(&mux_spin_lock, flags);
+
+#ifdef CONFIG_OMAP_MUX_ERRORS
+        return warn ? -ETXTBSY : 0;
+#else
+        return 0;
+#endif
+}
+
+EXPORT_SYMBOL(omap_cfg_reg);
+
+#endif  /* CONFIG_OMAP_MUX */