omap: headers: Move remaining headers from include/mach to include/plat

Move the remaining headers under plat-omap/include/mach
to plat-omap/include/plat. Also search and replace the
files using these headers to include using the right path.

This was done with:

#!/bin/bash
mach_dir_old="arch/arm/plat-omap/include/mach"
plat_dir_new="arch/arm/plat-omap/include/plat"
headers=$(cd $mach_dir_old && ls *.h)
omap_dirs="arch/arm/*omap*/ \
drivers/video/omap \
sound/soc/omap"
other_files="drivers/leds/leds-ams-delta.c \
drivers/mfd/menelaus.c \
drivers/mfd/twl4030-core.c \
drivers/mtd/nand/ams-delta.c"

for header in $headers; do
	old="#include <mach\/$header"
	new="#include <plat\/$header"
	for dir in $omap_dirs; do
		find $dir -type f -name \*.[chS] | \
			xargs sed -i "s/$old/$new/"
	done
	find drivers/ -type f -name \*omap*.[chS] | \
		xargs sed -i "s/$old/$new/"
	for file in $other_files; do
		sed -i "s/$old/$new/" $file
	done
done

for header in $(ls $mach_dir_old/*.h); do
	git mv $header $plat_dir_new/
done

Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 143 insertions, 0 deletions

diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
new file mode 100644
index 000000000000..7b58a5f78ce4
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -0,0 +1,143 @@
+#ifndef ____ASM_ARCH_SDRC_H
+#define ____ASM_ARCH_SDRC_H
+
+/*
+ * OMAP2/3 SDRC/SMS register definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Tony Lindgren
+ * Paul Walmsley
+ * Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG          0x010
+#define SDRC_CS_CFG             0x040
+#define SDRC_SHARING            0x044
+#define SDRC_ERR_TYPE           0x04C
+#define SDRC_DLLA_CTRL          0x060
+#define SDRC_DLLA_STATUS        0x064
+#define SDRC_DLLB_CTRL          0x068
+#define SDRC_DLLB_STATUS        0x06C
+#define SDRC_POWER              0x070
+#define SDRC_MCFG_0             0x080
+#define SDRC_MR_0               0x084
+#define SDRC_EMR2_0             0x08c
+#define SDRC_ACTIM_CTRL_A_0     0x09c
+#define SDRC_ACTIM_CTRL_B_0     0x0a0
+#define SDRC_RFR_CTRL_0         0x0a4
+#define SDRC_MANUAL_0           0x0a8
+#define SDRC_MCFG_1             0x0B0
+#define SDRC_MR_1               0x0B4
+#define SDRC_EMR2_1             0x0BC
+#define SDRC_ACTIM_CTRL_A_1     0x0C4
+#define SDRC_ACTIM_CTRL_B_1     0x0C8
+#define SDRC_RFR_CTRL_1         0x0D4
+#define SDRC_MANUAL_1           0x0D8
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz    (0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz    (0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz    (0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz    (0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS    (0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+#define OMAP242X_SMS_REGADDR(reg)                                       \
+                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)                                       \
+                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)                                       \
+                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG           0x010
+/* REVISIT: fill in other SMS registers here */
+
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip.  These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files.  The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+        unsigned long rate;
+        u32 actim_ctrla;
+        u32 actim_ctrlb;
+        u32 rfr_ctrl;
+        u32 mr;
+};
+
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+                            struct omap_sdrc_params *sdrc_cs1);
+int omap2_sdrc_get_params(unsigned long r,
+                          struct omap_sdrc_params **sdrc_cs0,
+                          struct omap_sdrc_params **sdrc_cs1);
+
+#ifdef CONFIG_ARCH_OMAP2
+
+struct memory_timings {
+        u32 m_type;             /* ddr = 1, sdr = 0 */
+        u32 dll_mode;           /* use lock mode = 1, unlock mode = 0 */
+        u32 slow_dll_ctrl;      /* unlock mode, dll value for slow speed */
+        u32 fast_dll_ctrl;      /* unlock mode, dll value for fast speed */
+        u32 base_cs;            /* base chip select to use for calculations */
+};
+
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
+
+#endif  /* CONFIG_ARCH_OMAP2 */
+
+#endif  /* __ASSEMBLER__ */
+
+#endif