OMAP7XX: Rename all the rest of the omap730 references in omap1 core

This patch is part of a series which removes references to omap730 in code
which is shared with omap850, replacing them with references to omap7xx.

This updates all the remaining omap730 references in miscellaneous local
variables, macros and similar.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>

1 files changed, 46 insertions, 46 deletions

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 22f6e689f5c0..b0c73613a4e9 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -68,20 +68,20 @@
 #define OMAP1610_GPIO_SET_DATAOUT       0x00f0
 
 /*
- * OMAP730 specific GPIO registers
+ * OMAP7XX specific GPIO registers
  */
-#define OMAP730_GPIO1_BASE              OMAP1_IO_ADDRESS(0xfffbc000)
-#define OMAP730_GPIO2_BASE              OMAP1_IO_ADDRESS(0xfffbc800)
-#define OMAP730_GPIO3_BASE              OMAP1_IO_ADDRESS(0xfffbd000)
-#define OMAP730_GPIO4_BASE              OMAP1_IO_ADDRESS(0xfffbd800)
-#define OMAP730_GPIO5_BASE              OMAP1_IO_ADDRESS(0xfffbe000)
-#define OMAP730_GPIO6_BASE              OMAP1_IO_ADDRESS(0xfffbe800)
-#define OMAP730_GPIO_DATA_INPUT         0x00
-#define OMAP730_GPIO_DATA_OUTPUT        0x04
-#define OMAP730_GPIO_DIR_CONTROL        0x08
-#define OMAP730_GPIO_INT_CONTROL        0x0c
-#define OMAP730_GPIO_INT_MASK           0x10
-#define OMAP730_GPIO_INT_STATUS         0x14
+#define OMAP7XX_GPIO1_BASE              OMAP1_IO_ADDRESS(0xfffbc000)
+#define OMAP7XX_GPIO2_BASE              OMAP1_IO_ADDRESS(0xfffbc800)
+#define OMAP7XX_GPIO3_BASE              OMAP1_IO_ADDRESS(0xfffbd000)
+#define OMAP7XX_GPIO4_BASE              OMAP1_IO_ADDRESS(0xfffbd800)
+#define OMAP7XX_GPIO5_BASE              OMAP1_IO_ADDRESS(0xfffbe000)
+#define OMAP7XX_GPIO6_BASE              OMAP1_IO_ADDRESS(0xfffbe800)
+#define OMAP7XX_GPIO_DATA_INPUT         0x00
+#define OMAP7XX_GPIO_DATA_OUTPUT        0x04
+#define OMAP7XX_GPIO_DIR_CONTROL        0x08
+#define OMAP7XX_GPIO_INT_CONTROL        0x0c
+#define OMAP7XX_GPIO_INT_MASK           0x10
+#define OMAP7XX_GPIO_INT_STATUS         0x14
 
 #define OMAP1_MPUIO_VBASE               OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
 
@@ -199,7 +199,7 @@ struct gpio_bank {
 #define METHOD_MPUIO            0
 #define METHOD_GPIO_1510        1
 #define METHOD_GPIO_1610        2
-#define METHOD_GPIO_730         3
+#define METHOD_GPIO_7XX         3
 #define METHOD_GPIO_24XX        5
 
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -220,14 +220,14 @@ static struct gpio_bank gpio_bank_1510[2] = {
 #endif
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-static struct gpio_bank gpio_bank_730[7] = {
+static struct gpio_bank gpio_bank_7xx[7] = {
         { OMAP1_MPUIO_VBASE,    INT_7XX_MPUIO,      IH_MPUIO_BASE,      METHOD_MPUIO },
-        { OMAP730_GPIO1_BASE,  INT_7XX_GPIO_BANK1,  IH_GPIO_BASE,       METHOD_GPIO_730 },
-        { OMAP730_GPIO2_BASE,  INT_7XX_GPIO_BANK2,  IH_GPIO_BASE + 32,  METHOD_GPIO_730 },
-        { OMAP730_GPIO3_BASE,  INT_7XX_GPIO_BANK3,  IH_GPIO_BASE + 64,  METHOD_GPIO_730 },
-        { OMAP730_GPIO4_BASE,  INT_7XX_GPIO_BANK4,  IH_GPIO_BASE + 96,  METHOD_GPIO_730 },
-        { OMAP730_GPIO5_BASE,  INT_7XX_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_730 },
-        { OMAP730_GPIO6_BASE,  INT_7XX_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_730 },
+        { OMAP7XX_GPIO1_BASE,  INT_7XX_GPIO_BANK1,  IH_GPIO_BASE,       METHOD_GPIO_7XX },
+        { OMAP7XX_GPIO2_BASE,  INT_7XX_GPIO_BANK2,  IH_GPIO_BASE + 32,  METHOD_GPIO_7XX },
+        { OMAP7XX_GPIO3_BASE,  INT_7XX_GPIO_BANK3,  IH_GPIO_BASE + 64,  METHOD_GPIO_7XX },
+        { OMAP7XX_GPIO4_BASE,  INT_7XX_GPIO_BANK4,  IH_GPIO_BASE + 96,  METHOD_GPIO_7XX },
+        { OMAP7XX_GPIO5_BASE,  INT_7XX_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_7XX },
+        { OMAP7XX_GPIO6_BASE,  INT_7XX_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_7XX },
 };
 #endif
 
@@ -373,8 +373,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
                 break;
 #endif
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-        case METHOD_GPIO_730:
-                reg += OMAP730_GPIO_DIR_CONTROL;
+        case METHOD_GPIO_7XX:
+                reg += OMAP7XX_GPIO_DIR_CONTROL;
                 break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -435,8 +435,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
                 break;
 #endif
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-        case METHOD_GPIO_730:
-                reg += OMAP730_GPIO_DATA_OUTPUT;
+        case METHOD_GPIO_7XX:
+                reg += OMAP7XX_GPIO_DATA_OUTPUT;
                 l = __raw_readl(reg);
                 if (enable)
                         l |= 1 << gpio;
@@ -493,8 +493,8 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
                 break;
 #endif
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-        case METHOD_GPIO_730:
-                reg += OMAP730_GPIO_DATA_INPUT;
+        case METHOD_GPIO_7XX:
+                reg += OMAP7XX_GPIO_DATA_INPUT;
                 break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -539,8 +539,8 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
                 break;
 #endif
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-        case METHOD_GPIO_730:
-                reg += OMAP730_GPIO_DATA_OUTPUT;
+        case METHOD_GPIO_7XX:
+                reg += OMAP7XX_GPIO_DATA_OUTPUT;
                 break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
@@ -743,8 +743,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
                 break;
 #endif
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-        case METHOD_GPIO_730:
-                reg += OMAP730_GPIO_INT_CONTROL;
+        case METHOD_GPIO_7XX:
+                reg += OMAP7XX_GPIO_INT_CONTROL;
                 l = __raw_readl(reg);
                 if (trigger & IRQ_TYPE_EDGE_RISING)
                         l |= 1 << gpio;
@@ -831,8 +831,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
                 break;
 #endif
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-        case METHOD_GPIO_730:
-                reg += OMAP730_GPIO_INT_STATUS;
+        case METHOD_GPIO_7XX:
+                reg += OMAP7XX_GPIO_INT_STATUS;
                 break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -900,8 +900,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
                 break;
 #endif
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-        case METHOD_GPIO_730:
-                reg += OMAP730_GPIO_INT_MASK;
+        case METHOD_GPIO_7XX:
+                reg += OMAP7XX_GPIO_INT_MASK;
                 mask = 0xffffffff;
                 inv = 1;
                 break;
@@ -966,8 +966,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
                 break;
 #endif
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-        case METHOD_GPIO_730:
-                reg += OMAP730_GPIO_INT_MASK;
+        case METHOD_GPIO_7XX:
+                reg += OMAP7XX_GPIO_INT_MASK;
                 l = __raw_readl(reg);
                 if (enable)
                         l &= ~(gpio_mask);
@@ -1161,8 +1161,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
                 isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
 #endif
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-        if (bank->method == METHOD_GPIO_730)
-                isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
+        if (bank->method == METHOD_GPIO_7XX)
+                isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         if (bank->method == METHOD_GPIO_24XX)
@@ -1431,8 +1431,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
         case METHOD_GPIO_1610:
                 reg += OMAP1610_GPIO_DIRECTION;
                 break;
-        case METHOD_GPIO_730:
-                reg += OMAP730_GPIO_DIR_CONTROL;
+        case METHOD_GPIO_7XX:
+                reg += OMAP7XX_GPIO_DIR_CONTROL;
                 break;
         case METHOD_GPIO_24XX:
                 reg += OMAP24XX_GPIO_OE;
@@ -1603,7 +1603,7 @@ static int __init _omap_gpio_init(void)
         if (cpu_is_omap7xx()) {
                 printk(KERN_INFO "OMAP7XX GPIO hardware\n");
                 gpio_bank_count = 7;
-                gpio_bank = gpio_bank_730;
+                gpio_bank = gpio_bank_7xx;
         }
 #endif
 #ifdef CONFIG_ARCH_OMAP24XX
@@ -1664,11 +1664,11 @@ static int __init _omap_gpio_init(void)
                         __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
                         __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
                 }
-                if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
-                        __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
-                        __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
+                if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
+                        __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK);
+                        __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS);
 
-                        gpio_count = 32; /* 730 has 32-bit GPIOs */
+                        gpio_count = 32; /* 7xx has 32-bit GPIOs */
                 }
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \