pinctrl/nomadik: implement pin configuration

This implements the pin configuration interface for the
Nomadik pin controller.

As part of the exercise we add a bit in the pin_cfg_t for
the Nomadik pinctrl driver that indicates if the pin should
be forced into GPIO mode. This is not done to go behind the
back of the GPIO subsystem, but to ensure that default modes
can be set by hogs on boot and system suspend/resume states.
It was used implicitly by the old code defining all config
settings and modes in a single config word but we now have
a split between pinmux and pinconf leading to the need to
have this.

We also add a bit for explicitly setting sleepmode of the
pin. This was previously handled by custom calls with the
_sleep() suffix, but we now have one single interface into
the configuration so we replace this with a bit indicating
that the pin shall be configured into sleep mode.

Some of the configuration can be refactored later to use
less custom fields on the pin_cfg_t but we are currently
leaving the old function calls in place so we stay
compatible.

ChangeLog v1->v2:
- Drop a hunk changing pinmuxing for GPIO and move it
  over to the preceding pinmux patch.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 13 insertions, 0 deletions

diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
index c015133a7ad3..9c949c7c98a7 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -124,6 +124,19 @@ typedef unsigned long pin_cfg_t;
 #define PIN_LOWEMI_DISABLED     (0 << PIN_LOWEMI_SHIFT)
 #define PIN_LOWEMI_ENABLED      (1 << PIN_LOWEMI_SHIFT)
 
+#define PIN_GPIOMODE_SHIFT      26
+#define PIN_GPIOMODE_MASK       (0x1 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE(x)         (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_DISABLED   (0 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_ENABLED    (1 << PIN_GPIOMODE_SHIFT)
+
+#define PIN_SLEEPMODE_SHIFT     27
+#define PIN_SLEEPMODE_MASK      (0x1 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE(x)        (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_DISABLED  (0 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_ENABLED   (1 << PIN_SLEEPMODE_SHIFT)
+
+
 /* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
 #define PIN_INPUT_PULLDOWN      (PIN_DIR_INPUT | PIN_PULL_DOWN)
 #define PIN_INPUT_PULLUP        (PIN_DIR_INPUT | PIN_PULL_UP)