ARM: 6153/1: nomadik MTU to use dynamic shift and mult assignment

This removes the hard-coded shift values for the MTU timer, since
the different platforms using this has very different running
frequencies doing this dynamically is a better idea. Also take
this opportunity to make a more through shutdown of the MTU
clockevent when requested.

Acked-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 10 insertions, 4 deletions

diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 08aaa4a7f65f..ea3ca86c5283 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -42,7 +42,6 @@ static struct clocksource nmdk_clksrc = {
         .rating         = 200,
         .read           = nmdk_read_timer_dummy,
         .mask           = CLOCKSOURCE_MASK(32),
-        .shift          = 20,
         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -82,6 +81,12 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
         case CLOCK_EVT_MODE_UNUSED:
                 /* disable irq */
                 writel(0, mtu_base + MTU_IMSC);
+                /* disable timer */
+                cr = readl(mtu_base + MTU_CR(1));
+                cr &= ~MTU_CRn_ENA;
+                writel(cr, mtu_base + MTU_CR(1));
+                /* load some high default value */
+                writel(0xffffffff, mtu_base + MTU_LR(1));
                 break;
         case CLOCK_EVT_MODE_RESUME:
                 break;
@@ -98,7 +103,6 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
 static struct clock_event_device nmdk_clkevt = {
         .name           = "mtu_1",
         .features       = CLOCK_EVT_FEAT_ONESHOT,
-        .shift          = 32,
         .rating         = 200,
         .set_mode       = nmdk_clkevt_mode,
         .set_next_event = nmdk_clkevt_next,
@@ -151,6 +155,7 @@ void __init nmdk_timer_init(void)
         } else {
                 cr |= MTU_CRn_PRESCALE_1;
         }
+        clocksource_calc_mult_shift(&nmdk_clksrc, rate, MTU_MIN_RANGE);
 
         /* Timer 0 is the free running clocksource */
         writel(cr, mtu_base + MTU_CR(0));
@@ -158,7 +163,6 @@ void __init nmdk_timer_init(void)
         writel(0, mtu_base + MTU_BGLR(0));
         writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 
-        nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
         /* Now the scheduling clock is ready */
         nmdk_clksrc.read = nmdk_read_timer;
 
@@ -175,8 +179,10 @@ void __init nmdk_timer_init(void)
         } else {
                 cr |= MTU_CRn_PRESCALE_1;
         }
+        clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
+
         writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
-        nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+
         nmdk_clkevt.max_delta_ns =
                 clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
         nmdk_clkevt.min_delta_ns =