[ARM] Always mark ARMv6 PTWs outer cacheable

Other platforms other than SMP may have an outer cache.  For these, we
also need to mark the page table walks outer cacheable.  Since marking
the walks always outer cacheable apparantly has no side effects, we
might as well always mark them so.

However, we continue to only mark PTWs shared if we have SMP enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 8 insertions, 6 deletions

diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 7b1843befb9c..d78c0ae7c2c2 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -30,6 +30,12 @@
 #define TTB_RGN_WT      (2 << 3)
 #define TTB_RGN_WB      (3 << 3)
 
+#ifndef CONFIG_SMP
+#define TTB_FLAGS       TTB_RGN_WBWA
+#else
+#define TTB_FLAGS       TTB_RGN_WBWA|TTB_S
+#endif
+
 ENTRY(cpu_v6_proc_init)
         mov     pc, lr
 
@@ -92,9 +98,7 @@ ENTRY(cpu_v6_switch_mm)
 #ifdef CONFIG_MMU
         mov     r2, #0
         ldr     r1, [r1, #MM_CONTEXT_ID]        @ get mm->context.id
-#ifdef CONFIG_SMP
-        orr     r0, r0, #TTB_RGN_WBWA|TTB_S     @ mark PTWs shared, outer cacheable
-#endif
+        orr     r0, r0, #TTB_FLAGS
         mcr     p15, 0, r2, c7, c5, 6           @ flush BTAC/BTB
         mcr     p15, 0, r2, c7, c10, 4          @ drain write buffer
         mcr     p15, 0, r0, c2, c0, 0           @ set TTB 0
@@ -204,9 +208,7 @@ __v6_setup:
 #ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7, 0           @ invalidate I + D TLBs
         mcr     p15, 0, r0, c2, c0, 2           @ TTB control register
-#ifdef CONFIG_SMP
-        orr     r4, r4, #TTB_RGN_WBWA|TTB_S     @ mark PTWs shared, outer cacheable
-#endif
+        orr     r4, r4, #TTB_FLAGS
         mcr     p15, 0, r4, c2, c0, 1           @ load TTB1
 #endif /* CONFIG_MMU */
         adr     r5, v6_crval