[ARM] nommu: provide a way for correct control register value selection

Most MMU-based CPUs have a restriction on the setting of the data cache
enable and mmu enable bits in the control register, whereby if the data
cache is enabled, the MMU must also be enabled.  Enabling the data
cache without the MMU is an invalid combination.

However, there are CPUs where the data cache can be enabled without the
MMU.

In order to allow these CPUs to take advantage of that, provide a
method whereby each proc-*.S file defines the control regsiter value
for use with nommu (with the MMU disabled.)  Later on, when we add
support for enabling the MMU on these devices, we can adjust the
"crval" macro to also enable the data cache for nommu.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 11 insertions, 8 deletions

diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 8d32e21fe151..2303790dc3ff 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -426,23 +426,26 @@ __xsc3_setup:
         orr     r0, r0, #(1 << 10)              @ enable L2 for LLR cache
 #endif
         mcr     p15, 0, r0, c1, c0, 1           @ set auxiliary control reg
+
+        adr     r5, xsc3_crval
+        ldmia   r5, {r5, r6}
         mrc     p15, 0, r0, c1, c0, 0           @ get control register
-        bic     r0, r0, #0x0002                 @ .... .... .... ..A.
-        orr     r0, r0, #0x0005                 @ .... .... .... .C.M
+        bic     r0, r0, r5                      @ .... .... .... ..A.
+        orr     r0, r0, r6                      @ .... .... .... .C.M
 #if BTB_ENABLE
-        bic     r0, r0, #0x0200                 @ .... ..R. .... ....
-        orr     r0, r0, #0x3900                 @ ..VI Z..S .... ....
-#else
-        bic     r0, r0, #0x0a00                 @ .... Z.R. .... ....
-        orr     r0, r0, #0x3100                 @ ..VI ...S .... ....
+        orr     r0, r0, #0x00000800             @ ..VI Z..S .... ....
 #endif
 #if L2_CACHE_ENABLE
-        orr     r0, r0, #0x4000000              @ L2 enable
+        orr     r0, r0, #0x04000000             @ L2 enable
 #endif
         mov     pc, lr
 
         .size   __xsc3_setup, . - __xsc3_setup
 
+        .type   xsc3_crval, #object
+xsc3_crval:
+        crval   clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100
+
         __INITDATA
 
 /*