ARM: Factor out common code from cpu_proc_fin()

All implementations of cpu_proc_fin() start by disabling interrupts
and then flush caches.  Rather than have every processors proc_fin()
implementation do this, move it out into generic code - and move the
cache flush past setup_mm_for_reboot() (so it can benefit from having
caches still enabled.)

This allows cpu_proc_fin() to become independent of the L1/L2 cache
types, and eventually move the L2 cache flushing into the L2 support
code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 1 insertions, 9 deletions

diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 8be81992645d..86f80aa56216 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -69,19 +69,11 @@ ENTRY(cpu_arm920_proc_init)
  * cpu_arm920_proc_fin()
  */
 ENTRY(cpu_arm920_proc_fin)
-        stmfd   sp!, {lr}
-        mov     ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-        msr     cpsr_c, ip
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-        bl      arm920_flush_kern_cache_all
-#else
-        bl      v4wt_flush_kern_cache_all
-#endif
         mrc     p15, 0, r0, c1, c0, 0           @ ctrl register
         bic     r0, r0, #0x1000                 @ ...i............
         bic     r0, r0, #0x000e                 @ ............wca.
         mcr     p15, 0, r0, c1, c0, 0           @ disable caches
-        ldmfd   sp!, {pc}
+        mov     pc, lr
 
 /*
  * cpu_arm920_reset(loc)