Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 530 insertions, 0 deletions

diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
new file mode 100644
index 000000000000..1f325231b9e4
--- /dev/null
+++ b/arch/arm/mm/proc-arm1020.S
@@ -0,0 +1,530 @@
+/*
+ *  linux/arch/arm/mm/proc-arm1020.S: MMU functions for ARM1020
+ *
+ *  Copyright (C) 2000 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the arm1020.
+ *
+ *  CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
+ */
+#include <linux/linkage.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+#include <asm/hardware.h>
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions.  Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#define MAX_AREA_SIZE   32768
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS 16
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES  64
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ */
+#define CACHE_DLIMIT    32768
+
+        .text
+/*
+ * cpu_arm1020_proc_init()
+ */
+ENTRY(cpu_arm1020_proc_init)
+        mov     pc, lr
+
+/*
+ * cpu_arm1020_proc_fin()
+ */
+ENTRY(cpu_arm1020_proc_fin)
+        stmfd   sp!, {lr}
+        mov     ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+        msr     cpsr_c, ip
+        bl      arm1020_flush_kern_cache_all
+        mrc     p15, 0, r0, c1, c0, 0           @ ctrl register
+        bic     r0, r0, #0x1000                 @ ...i............
+        bic     r0, r0, #0x000e                 @ ............wca.
+        mcr     p15, 0, r0, c1, c0, 0           @ disable caches
+        ldmfd   sp!, {pc}
+
+/*
+ * cpu_arm1020_reset(loc)
+ *
+ * Perform a soft reset of the system.  Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+        .align  5
+ENTRY(cpu_arm1020_reset)
+        mov     ip, #0
+        mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+        mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
+        bic     ip, ip, #0x000f                 @ ............wcam
+        bic     ip, ip, #0x1100                 @ ...i...s........
+        mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
+        mov     pc, r0
+
+/*
+ * cpu_arm1020_do_idle()
+ */
+        .align  5
+ENTRY(cpu_arm1020_do_idle)
+        mcr     p15, 0, r0, c7, c0, 4           @ Wait for interrupt
+        mov     pc, lr
+
+/* ================================= CACHE ================================ */
+
+        .align  5
+/*
+ *      flush_user_cache_all()
+ *
+ *      Invalidate all cache entries in a particular address
+ *      space.
+ */
+ENTRY(arm1020_flush_user_cache_all)
+        /* FALLTHROUGH */
+/*
+ *      flush_kern_cache_all()
+ *
+ *      Clean and invalidate the entire cache.
+ */
+ENTRY(arm1020_flush_kern_cache_all)
+        mov     r2, #VM_EXEC
+        mov     ip, #0
+__flush_whole_cache:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        mov     r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
+1:      orr     r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2:      mcr     p15, 0, r3, c7, c14, 2          @ clean+invalidate D index
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        subs    r3, r3, #1 << 26
+        bcs     2b                              @ entries 63 to 0
+        subs    r1, r1, #1 << 5
+        bcs     1b                              @ segments 15 to 0
+#endif
+        tst     r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+        mcrne   p15, 0, ip, c7, c5, 0           @ invalidate I cache
+#endif
+        mcrne   p15, 0, ip, c7, c10, 4          @ drain WB
+        mov     pc, lr
+
+/*
+ *      flush_user_cache_range(start, end, flags)
+ *
+ *      Invalidate a range of cache entries in the specified
+ *      address space.
+ *
+ *      - start - start address (inclusive)
+ *      - end   - end address (exclusive)
+ *      - flags - vm_flags for this space
+ */
+ENTRY(arm1020_flush_user_cache_range)
+        mov     ip, #0
+        sub     r3, r1, r0                      @ calculate total size
+        cmp     r3, #CACHE_DLIMIT
+        bhs     __flush_whole_cache
+
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+        mcr     p15, 0, ip, c7, c10, 4
+1:      mcr     p15, 0, r0, c7, c14, 1          @ clean+invalidate D entry
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        add     r0, r0, #CACHE_DLINESIZE
+        cmp     r0, r1
+        blo     1b
+#endif
+        tst     r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+        mcrne   p15, 0, ip, c7, c5, 0           @ invalidate I cache
+#endif
+        mcrne   p15, 0, ip, c7, c10, 4          @ drain WB
+        mov     pc, lr
+
+/*
+ *      coherent_kern_range(start, end)
+ *
+ *      Ensure coherency between the Icache and the Dcache in the
+ *      region described by start.  If you have non-snooping
+ *      Harvard caches, you need to implement this function.
+ *
+ *      - start - virtual start address
+ *      - end   - virtual end address
+ */
+ENTRY(arm1020_coherent_kern_range)
+        /* FALLTRHOUGH */
+
+/*
+ *      coherent_user_range(start, end)
+ *
+ *      Ensure coherency between the Icache and the Dcache in the
+ *      region described by start.  If you have non-snooping
+ *      Harvard caches, you need to implement this function.
+ *
+ *      - start - virtual start address
+ *      - end   - virtual end address
+ */
+ENTRY(arm1020_coherent_user_range)
+        mov     ip, #0
+        bic     r0, r0, #CACHE_DLINESIZE - 1
+        mcr     p15, 0, ip, c7, c10, 4
+1:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+        mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#endif
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+        mcr     p15, 0, r0, c7, c5, 1           @ invalidate I entry
+#endif
+        add     r0, r0, #CACHE_DLINESIZE
+        cmp     r0, r1
+        blo     1b
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        mov     pc, lr
+
+/*
+ *      flush_kern_dcache_page(void *page)
+ *
+ *      Ensure no D cache aliasing occurs, either with itself or
+ *      the I cache
+ *
+ *      - page  - page aligned address
+ */
+ENTRY(arm1020_flush_kern_dcache_page)
+        mov     ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+        add     r1, r0, #PAGE_SZ
+1:      mcr     p15, 0, r0, c7, c14, 1          @ clean+invalidate D entry
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        add     r0, r0, #CACHE_DLINESIZE
+        cmp     r0, r1
+        blo     1b
+#endif
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        mov     pc, lr
+
+/*
+ *      dma_inv_range(start, end)
+ *
+ *      Invalidate (discard) the specified virtual address range.
+ *      May not write back any entries.  If 'start' or 'end'
+ *      are not cache line aligned, those lines must be written
+ *      back.
+ *
+ *      - start - virtual start address
+ *      - end   - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm1020_dma_inv_range)
+        mov     ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+        tst     r0, #CACHE_DLINESIZE - 1
+        bic     r0, r0, #CACHE_DLINESIZE - 1
+        mcrne   p15, 0, ip, c7, c10, 4
+        mcrne   p15, 0, r0, c7, c10, 1          @ clean D entry
+        mcrne   p15, 0, ip, c7, c10, 4          @ drain WB
+        tst     r1, #CACHE_DLINESIZE - 1
+        mcrne   p15, 0, ip, c7, c10, 4
+        mcrne   p15, 0, r1, c7, c10, 1          @ clean D entry
+        mcrne   p15, 0, ip, c7, c10, 4          @ drain WB
+1:      mcr     p15, 0, r0, c7, c6, 1           @ invalidate D entry
+        add     r0, r0, #CACHE_DLINESIZE
+        cmp     r0, r1
+        blo     1b
+#endif
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        mov     pc, lr
+
+/*
+ *      dma_clean_range(start, end)
+ *
+ *      Clean the specified virtual address range.
+ *
+ *      - start - virtual start address
+ *      - end   - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(arm1020_dma_clean_range)
+        mov     ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+        bic     r0, r0, #CACHE_DLINESIZE - 1
+1:      mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        add     r0, r0, #CACHE_DLINESIZE
+        cmp     r0, r1
+        blo     1b
+#endif
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        mov     pc, lr
+
+/*
+ *      dma_flush_range(start, end)
+ *
+ *      Clean and invalidate the specified virtual address range.
+ *
+ *      - start - virtual start address
+ *      - end   - virtual end address
+ */
+ENTRY(arm1020_dma_flush_range)
+        mov     ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+        bic     r0, r0, #CACHE_DLINESIZE - 1
+        mcr     p15, 0, ip, c7, c10, 4
+1:      mcr     p15, 0, r0, c7, c14, 1          @ clean+invalidate D entry
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        add     r0, r0, #CACHE_DLINESIZE
+        cmp     r0, r1
+        blo     1b
+#endif
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        mov     pc, lr
+
+ENTRY(arm1020_cache_fns)
+        .long   arm1020_flush_kern_cache_all
+        .long   arm1020_flush_user_cache_all
+        .long   arm1020_flush_user_cache_range
+        .long   arm1020_coherent_kern_range
+        .long   arm1020_coherent_user_range
+        .long   arm1020_flush_kern_dcache_page
+        .long   arm1020_dma_inv_range
+        .long   arm1020_dma_clean_range
+        .long   arm1020_dma_flush_range
+
+        .align  5
+ENTRY(cpu_arm1020_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+        mov     ip, #0
+1:      mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
+        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+        add     r0, r0, #CACHE_DLINESIZE
+        subs    r1, r1, #CACHE_DLINESIZE
+        bhi     1b
+#endif
+        mov     pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm1020_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+        .align  5
+ENTRY(cpu_arm1020_switch_mm)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+        mcr     p15, 0, r3, c7, c10, 4
+        mov     r1, #0xF                        @ 16 segments
+1:      mov     r3, #0x3F                       @ 64 entries
+2:      mov     ip, r3, LSL #26                 @ shift up entry
+        orr     ip, ip, r1, LSL #5              @ shift in/up index
+        mcr     p15, 0, ip, c7, c14, 2          @ Clean & Inval DCache entry
+        mov     ip, #0
+        mcr     p15, 0, ip, c7, c10, 4
+        subs    r3, r3, #1
+        cmp     r3, #0
+        bge     2b                              @ entries 3F to 0
+        subs    r1, r1, #1
+        cmp     r1, #0
+        bge     1b                              @ segments 15 to 0
+
+#endif
+        mov     r1, #0
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+        mcr     p15, 0, r1, c7, c5, 0           @ invalidate I cache
+#endif
+        mcr     p15, 0, r1, c7, c10, 4          @ drain WB
+        mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
+        mcr     p15, 0, r1, c8, c7, 0           @ invalidate I & D TLBs
+        mov     pc, lr
+        
+/*
+ * cpu_arm1020_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+        .align  5
+ENTRY(cpu_arm1020_set_pte)
+        str     r1, [r0], #-2048                @ linux version
+
+        eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+        bic     r2, r1, #PTE_SMALL_AP_MASK
+        bic     r2, r2, #PTE_TYPE_MASK
+        orr     r2, r2, #PTE_TYPE_SMALL
+
+        tst     r1, #L_PTE_USER                 @ User?
+        orrne   r2, r2, #PTE_SMALL_AP_URO_SRW
+
+        tst     r1, #L_PTE_WRITE | L_PTE_DIRTY  @ Write and Dirty?
+        orreq   r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+        tst     r1, #L_PTE_PRESENT | L_PTE_YOUNG        @ Present and Young?
+        movne   r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+        eor     r3, r1, #0x0a                   @ C & small page?
+        tst     r3, #0x0b
+        biceq   r2, r2, #4
+#endif
+        str     r2, [r0]                        @ hardware version
+        mov     r0, r0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+        mcr     p15, 0, r0, c7, c10, 4
+        mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
+#endif
+        mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+        mov     pc, lr
+
+        __INIT
+
+        .type   __arm1020_setup, #function
+__arm1020_setup:
+        mov     r0, #0
+        mcr     p15, 0, r0, c7, c7              @ invalidate I,D caches on v4
+        mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer on v4
+        mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
+        mrc     p15, 0, r0, c1, c0              @ get control register v4
+        ldr     r5, arm1020_cr1_clear
+        bic     r0, r0, r5
+        ldr     r5, arm1020_cr1_set
+        orr     r0, r0, r5
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+        orr     r0, r0, #0x4000                 @ .R.. .... .... ....
+#endif
+        mov     pc, lr
+        .size   __arm1020_setup, . - __arm1020_setup
+
+        /*
+         *  R
+         * .RVI ZFRS BLDP WCAM
+         * .0.1 1001 ..11 0101  /* FIXME: why no V bit? */
+         */
+        .type   arm1020_cr1_clear, #object
+        .type   arm1020_cr1_set, #object
+arm1020_cr1_clear:
+        .word   0x593f
+arm1020_cr1_set:
+        .word   0x1935
+
+        __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *           come through these
+ */
+        .type   arm1020_processor_functions, #object
+arm1020_processor_functions:
+        .word   v4t_early_abort
+        .word   cpu_arm1020_proc_init
+        .word   cpu_arm1020_proc_fin
+        .word   cpu_arm1020_reset
+        .word   cpu_arm1020_do_idle
+        .word   cpu_arm1020_dcache_clean_area
+        .word   cpu_arm1020_switch_mm
+        .word   cpu_arm1020_set_pte
+        .size   arm1020_processor_functions, . - arm1020_processor_functions
+
+        .section ".rodata"
+
+        .type   cpu_arch_name, #object
+cpu_arch_name:
+        .asciz  "armv5t"
+        .size   cpu_arch_name, . - cpu_arch_name
+
+        .type   cpu_elf_name, #object
+cpu_elf_name:
+        .asciz  "v5"
+        .size   cpu_elf_name, . - cpu_elf_name
+
+        .type   cpu_arm1020_name, #object
+cpu_arm1020_name:
+        .ascii  "ARM1020"
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+        .ascii  "i"
+#endif
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+        .ascii  "d"
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+        .ascii  "(wt)"
+#else
+        .ascii  "(wb)"
+#endif
+#endif
+#ifndef CONFIG_CPU_BPREDICT_DISABLE
+        .ascii  "B"
+#endif
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+        .ascii  "RR"
+#endif
+        .ascii  "\0"
+        .size   cpu_arm1020_name, . - cpu_arm1020_name
+
+        .align
+
+        .section ".proc.info", #alloc, #execinstr
+
+        .type   __arm1020_proc_info,#object
+__arm1020_proc_info:
+        .long   0x4104a200                      @ ARM 1020T (Architecture v5T)
+        .long   0xff0ffff0
+        .long   PMD_TYPE_SECT | \
+                PMD_SECT_AP_WRITE | \
+                PMD_SECT_AP_READ
+        b       __arm1020_setup
+        .long   cpu_arch_name
+        .long   cpu_elf_name
+        .long   HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
+        .long   cpu_arm1020_name
+        .long   arm1020_processor_functions
+        .long   v4wbi_tlb_fns
+        .long   v4wb_user_fns
+        .long   arm1020_cache_fns
+        .size   __arm1020_proc_info, . - __arm1020_proc_info