aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-u300
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@stericsson.com>2009-04-23 16:15:04 -0400
committerRussell King <rmk+kernel@arm.linux.org.uk>2009-04-28 17:44:09 -0400
commitbd41b99d4661e775ff152f2842782c43dbb30a59 (patch)
tree3cbf711bd296286ea57235baba79ececd253edb9 /arch/arm/mach-u300
parentfa59440d0c7b5a2bcdc9e35f25fdac693e54c86a (diff)
[ARM] 5471/2: U300 GPIO and PADMUX support
This adds GPIO and PADMUX headers and implementation for the U300 platform. This is an implementation in isolation that depend on later patches in this series to plug into the framework. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-u300')
-rw-r--r--arch/arm/mach-u300/gpio.c701
-rw-r--r--arch/arm/mach-u300/include/mach/gpio.h290
-rw-r--r--arch/arm/mach-u300/padmux.c58
-rw-r--r--arch/arm/mach-u300/padmux.h19
4 files changed, 1068 insertions, 0 deletions
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
new file mode 100644
index 000000000000..2d5ae8ecb8c8
--- /dev/null
+++ b/arch/arm/mach-u300/gpio.c
@@ -0,0 +1,701 @@
1/*
2 *
3 * arch/arm/mach-u300/gpio.c
4 *
5 *
6 * Copyright (C) 2007-2009 ST-Ericsson AB
7 * License terms: GNU General Public License (GPL) version 2
8 * U300 GPIO module.
9 * This can driver either of the two basic GPIO cores
10 * available in the U300 platforms:
11 * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
12 * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
13 * Notice that you also have inline macros in <asm-arch/gpio.h>
14 * Author: Linus Walleij <linus.walleij@stericsson.com>
15 * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
16 *
17 */
18#include <linux/module.h>
19#include <linux/interrupt.h>
20#include <linux/delay.h>
21#include <linux/errno.h>
22#include <linux/io.h>
23#include <linux/clk.h>
24#include <linux/err.h>
25#include <linux/platform_device.h>
26#include <linux/gpio.h>
27
28/* Need access to SYSCON registers for PADmuxing */
29#include <mach/syscon.h>
30
31#include "padmux.h"
32
33/* Reference to GPIO block clock */
34static struct clk *clk;
35
36/* Memory resource */
37static struct resource *memres;
38static void __iomem *virtbase;
39
40struct u300_gpio_port {
41 const char *name;
42 int irq;
43 int number;
44};
45
46
47static struct u300_gpio_port gpio_ports[] = {
48 {
49 .name = "gpio0",
50 .number = 0,
51 },
52 {
53 .name = "gpio1",
54 .number = 1,
55 },
56 {
57 .name = "gpio2",
58 .number = 2,
59 },
60#ifdef U300_COH901571_3
61 {
62 .name = "gpio3",
63 .number = 3,
64 },
65 {
66 .name = "gpio4",
67 .number = 4,
68 },
69#ifdef CONFIG_MACH_U300_BS335
70 {
71 .name = "gpio5",
72 .number = 5,
73 },
74 {
75 .name = "gpio6",
76 .number = 6,
77 },
78#endif
79#endif
80
81};
82
83
84#ifdef U300_COH901571_3
85
86/* Default input value */
87#define DEFAULT_OUTPUT_LOW 0
88#define DEFAULT_OUTPUT_HIGH 1
89
90/* GPIO Pull-Up status */
91#define DISABLE_PULL_UP 0
92#define ENABLE_PULL_UP 1
93
94#define GPIO_NOT_USED 0
95#define GPIO_IN 1
96#define GPIO_OUT 2
97
98struct u300_gpio_configuration_data {
99 unsigned char pin_usage;
100 unsigned char default_output_value;
101 unsigned char pull_up;
102};
103
104/* Initial configuration */
105const struct u300_gpio_configuration_data
106u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
107#ifdef CONFIG_MACH_U300_BS335
108 /* Port 0, pins 0-7 */
109 {
110 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
111 {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
112 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
113 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
114 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
115 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
116 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
117 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
118 },
119 /* Port 1, pins 0-7 */
120 {
121 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
122 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
123 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
124 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
125 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
126 {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
127 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
128 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
129 },
130 /* Port 2, pins 0-7 */
131 {
132 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
133 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
134 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
135 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
136 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
137 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
138 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
139 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
140 },
141 /* Port 3, pins 0-7 */
142 {
143 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
144 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
145 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
146 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
147 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
148 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
149 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
150 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
151 },
152 /* Port 4, pins 0-7 */
153 {
154 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
155 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
156 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
157 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
158 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
159 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
160 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
161 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
162 },
163 /* Port 5, pins 0-7 */
164 {
165 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
166 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
167 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
168 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
169 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
170 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
171 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
172 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
173 },
174 /* Port 6, pind 0-7 */
175 {
176 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
177 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
178 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
179 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
180 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
181 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
182 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
183 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
184 }
185#endif
186
187#ifdef CONFIG_MACH_U300_BS365
188 /* Port 0, pins 0-7 */
189 {
190 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
191 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
192 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
193 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
194 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
195 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
196 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
197 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
198 },
199 /* Port 1, pins 0-7 */
200 {
201 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
202 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
203 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
204 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
205 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
206 {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
207 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
208 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
209 },
210 /* Port 2, pins 0-7 */
211 {
212 {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
213 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
214 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
215 {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
216 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
217 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
218 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
219 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
220 },
221 /* Port 3, pins 0-7 */
222 {
223 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
224 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
225 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
226 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
227 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
228 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
229 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
230 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
231 },
232 /* Port 4, pins 0-7 */
233 {
234 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
235 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
236 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
237 {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
238 /* These 4 pins doesn't exist on DB3210 */
239 {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
240 {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
241 {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
242 {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
243 }
244#endif
245};
246#endif
247
248
249/* No users == we can power down GPIO */
250static int gpio_users;
251
252struct gpio_struct {
253 int (*callback)(void *);
254 void *data;
255 int users;
256};
257
258static struct gpio_struct gpio_pin[U300_GPIO_MAX];
259
260/*
261 * Let drivers register callback in order to get notified when there is
262 * an interrupt on the gpio pin
263 */
264int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
265{
266 if (gpio_pin[gpio].callback)
267 printk(KERN_WARNING "GPIO: %s: WARNING: callback already " \
268 "registered for gpio pin#%d\n", __func__, gpio);
269 gpio_pin[gpio].callback = func;
270 gpio_pin[gpio].data = data;
271
272 return 0;
273}
274EXPORT_SYMBOL(gpio_register_callback);
275
276int gpio_unregister_callback(unsigned gpio)
277{
278 if (!gpio_pin[gpio].callback)
279 printk(KERN_WARNING "GPIO: %s: WARNING: callback already " \
280 "unregistered for gpio pin#%d\n", __func__, gpio);
281 gpio_pin[gpio].callback = NULL;
282 gpio_pin[gpio].data = NULL;
283
284 return 0;
285}
286EXPORT_SYMBOL(gpio_unregister_callback);
287
288int gpio_request(unsigned gpio, const char *label)
289{
290 if (gpio_pin[gpio].users)
291 return -EINVAL;
292 else
293 gpio_pin[gpio].users++;
294
295 gpio_users++;
296
297 return 0;
298}
299EXPORT_SYMBOL(gpio_request);
300
301void gpio_free(unsigned gpio)
302{
303 gpio_users--;
304 gpio_pin[gpio].users--;
305 if (unlikely(gpio_pin[gpio].users < 0)) {
306 printk(KERN_WARNING "GPIO: Warning: gpio#%d release mismatch\n",
307 gpio);
308 gpio_pin[gpio].users = 0;
309 }
310
311 return;
312}
313EXPORT_SYMBOL(gpio_free);
314
315/* This returns zero or nonzero */
316int gpio_get_value(unsigned gpio)
317{
318 return readl(virtbase + U300_GPIO_PXPDIR +
319 PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
320}
321EXPORT_SYMBOL(gpio_get_value);
322
323/*
324 * We hope that the compiler will optimize away the unused branch
325 * in case "value" is a constant
326 */
327void gpio_set_value(unsigned gpio, int value)
328{
329 u32 val;
330 unsigned long flags;
331
332 local_irq_save(flags);
333 if (value) {
334 /* set */
335 val = readl(virtbase + U300_GPIO_PXPDOR +
336 PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
337 & (1 << (gpio & 0x07));
338 writel(val | (1 << (gpio & 0x07)), virtbase +
339 U300_GPIO_PXPDOR +
340 PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
341 } else {
342 /* clear */
343 val = readl(virtbase + U300_GPIO_PXPDOR +
344 PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
345 & (1 << (gpio & 0x07));
346 writel(val & ~(1 << (gpio & 0x07)), virtbase +
347 U300_GPIO_PXPDOR +
348 PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
349 }
350 local_irq_restore(flags);
351}
352EXPORT_SYMBOL(gpio_set_value);
353
354int gpio_direction_input(unsigned gpio)
355{
356 unsigned long flags;
357 u32 val;
358
359 if (gpio > U300_GPIO_MAX)
360 return -EINVAL;
361
362 local_irq_save(flags);
363 val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
364 U300_GPIO_PORTX_SPACING);
365 /* Mask out this pin*/
366 val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
367 /* This is not needed since it sets the bits to zero.*/
368 /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
369 writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
370 U300_GPIO_PORTX_SPACING);
371 local_irq_restore(flags);
372 return 0;
373}
374EXPORT_SYMBOL(gpio_direction_input);
375
376int gpio_direction_output(unsigned gpio, int value)
377{
378 unsigned long flags;
379 u32 val;
380
381 if (gpio > U300_GPIO_MAX)
382 return -EINVAL;
383
384 local_irq_save(flags);
385 val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
386 U300_GPIO_PORTX_SPACING);
387 /* Mask out this pin */
388 val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
389 /*
390 * FIXME: configure for push/pull, open drain or open source per pin
391 * in setup. The current driver will only support push/pull.
392 */
393 val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
394 << ((gpio & 0x07) << 1));
395 writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
396 U300_GPIO_PORTX_SPACING);
397 gpio_set_value(gpio, value);
398 local_irq_restore(flags);
399 return 0;
400}
401EXPORT_SYMBOL(gpio_direction_output);
402
403/*
404 * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
405 */
406void enable_irq_on_gpio_pin(unsigned gpio, int edge)
407{
408 u32 val;
409 unsigned long flags;
410 local_irq_save(flags);
411
412 val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
413 U300_GPIO_PORTX_SPACING);
414 val |= (1 << (gpio & 0x07));
415 writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
416 U300_GPIO_PORTX_SPACING);
417 val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
418 U300_GPIO_PORTX_SPACING);
419 if (edge)
420 val |= (1 << (gpio & 0x07));
421 else
422 val &= ~(1 << (gpio & 0x07));
423 writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
424 U300_GPIO_PORTX_SPACING);
425 local_irq_restore(flags);
426}
427EXPORT_SYMBOL(enable_irq_on_gpio_pin);
428
429void disable_irq_on_gpio_pin(unsigned gpio)
430{
431 u32 val;
432 unsigned long flags;
433
434 local_irq_save(flags);
435 val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
436 U300_GPIO_PORTX_SPACING);
437 val &= ~(1 << (gpio & 0x07));
438 writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
439 U300_GPIO_PORTX_SPACING);
440 local_irq_restore(flags);
441}
442EXPORT_SYMBOL(disable_irq_on_gpio_pin);
443
444/* Enable (value == 0) or disable (value == 1) internal pullup */
445void gpio_pullup(unsigned gpio, int value)
446{
447 u32 val;
448 unsigned long flags;
449
450 local_irq_save(flags);
451 if (value) {
452 val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
453 U300_GPIO_PORTX_SPACING);
454 writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
455 PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
456 } else {
457 val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
458 U300_GPIO_PORTX_SPACING);
459 writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
460 PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
461 }
462 local_irq_restore(flags);
463}
464EXPORT_SYMBOL(gpio_pullup);
465
466static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
467{
468 struct u300_gpio_port *port = dev_id;
469 u32 val;
470 int pin;
471
472 /* Read event register */
473 val = readl(virtbase + U300_GPIO_PXIEV + port->number *
474 U300_GPIO_PORTX_SPACING);
475 /* Mask with enable register */
476 val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
477 U300_GPIO_PORTX_SPACING);
478 /* Mask relevant bits */
479 val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
480 /* ACK IRQ (clear event) */
481 writel(val, virtbase + U300_GPIO_PXIEV + port->number *
482 U300_GPIO_PORTX_SPACING);
483 /* Print message */
484 while (val != 0) {
485 unsigned gpio;
486
487 pin = __ffs(val);
488 /* mask off this pin */
489 val &= ~(1 << pin);
490 gpio = (port->number << 3) + pin;
491
492 if (gpio_pin[gpio].callback)
493 (void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
494 else
495 printk(KERN_DEBUG "GPIO: Stray GPIO IRQ on line %d\n",
496 gpio);
497 }
498 return IRQ_HANDLED;
499}
500
501static void gpio_set_initial_values(void)
502{
503#ifdef U300_COH901571_3
504 int i, j;
505 unsigned long flags;
506 u32 val;
507
508 /* Write default values to all pins */
509 for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
510 val = 0;
511 for (j = 0; j < 8; j++)
512 val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
513 local_irq_save(flags);
514 writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
515 local_irq_restore(flags);
516 }
517
518 /*
519 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
520 * to output and 'GPIO_IN' to input for each port. And initalize
521 * default value on outputs.
522 */
523 for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
524 for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
525 local_irq_save(flags);
526 val = readl(virtbase + U300_GPIO_PXPCR +
527 i * U300_GPIO_PORTX_SPACING);
528 /* Mask out this pin */
529 val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
530
531 if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
532 val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
533 writel(val, virtbase + U300_GPIO_PXPCR +
534 i * U300_GPIO_PORTX_SPACING);
535 local_irq_restore(flags);
536 }
537 }
538
539 /* Enable or disable the internal pull-ups in the GPIO ASIC block */
540 for (i = 0; i < U300_GPIO_MAX; i++) {
541 val = 0;
542 for (j = 0; j < 8; j++)
543 val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j;
544 local_irq_save(flags);
545 writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
546 local_irq_restore(flags);
547 }
548#endif
549}
550
551static int __devinit gpio_probe(struct platform_device *pdev)
552{
553 u32 val;
554 int err = 0;
555 int i;
556 int num_irqs;
557
558 memset(gpio_pin, 0, sizeof(gpio_pin));
559
560 /* Get GPIO clock */
561 clk = clk_get(&pdev->dev, NULL);
562 if (IS_ERR(clk)) {
563 err = PTR_ERR(clk);
564 printk(KERN_ERR "GPIO: could not get GPIO clock\n");
565 goto err_no_clk;
566 }
567 err = clk_enable(clk);
568 if (err) {
569 printk(KERN_ERR "GPIO: could not enable GPIO clock\n");
570 goto err_no_clk_enable;
571 }
572
573 memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
574 if (!memres)
575 goto err_no_resource;
576
577 if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller")
578 == NULL) {
579 err = -ENODEV;
580 goto err_no_ioregion;
581 }
582
583 virtbase = ioremap(memres->start, memres->end - memres->start + 1);
584 if (!virtbase) {
585 err = -ENOMEM;
586 goto err_no_ioremap;
587 }
588
589#ifdef U300_COH901335
590 printk(KERN_INFO "GPIO: Initializing GPIO Controller COH 901 335\n");
591 /* Turn on the GPIO block */
592 writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
593#endif
594
595#ifdef U300_COH901571_3
596 printk(KERN_INFO "GPIO: Initializing GPIO Controller COH 901 571/3\n");
597 val = readl(virtbase + U300_GPIO_CR);
598 printk(KERN_INFO "GPIO: COH901571/3 block version: %d, " \
599 "number of cores: %d\n",
600 ((val & 0x0000FE00) >> 9),
601 ((val & 0x000001FC) >> 2));
602 writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
603#endif
604
605 /* Set up some padmuxing here */
606#ifdef CONFIG_MMC
607 pmx_set_mission_mode_mmc();
608#endif
609#ifdef CONFIG_SPI_PL022
610 pmx_set_mission_mode_spi();
611#endif
612
613 gpio_set_initial_values();
614
615 for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
616
617 gpio_ports[num_irqs].irq =
618 platform_get_irq_byname(pdev,
619 gpio_ports[num_irqs].name);
620
621 err = request_irq(gpio_ports[num_irqs].irq,
622 gpio_irq_handler, IRQF_DISABLED,
623 gpio_ports[num_irqs].name,
624 &gpio_ports[num_irqs]);
625 if (err) {
626 printk(KERN_CRIT "GPIO: Cannot allocate IRQ for %s!\n",
627 gpio_ports[num_irqs].name);
628 goto err_no_irq;
629 }
630 /* Turns off PortX_irq_force */
631 writel(0x0, virtbase + U300_GPIO_PXIFR +
632 num_irqs * U300_GPIO_PORTX_SPACING);
633 }
634 printk(KERN_INFO "GPIO: U300 gpio module loaded\n");
635
636 return 0;
637
638 err_no_irq:
639 for (i = 0; i < num_irqs; i++)
640 free_irq(gpio_ports[i].irq, &gpio_ports[i]);
641 iounmap(virtbase);
642 err_no_ioremap:
643 release_mem_region(memres->start, memres->end - memres->start);
644 err_no_ioregion:
645 err_no_resource:
646 clk_disable(clk);
647 err_no_clk_enable:
648 clk_put(clk);
649 err_no_clk:
650 printk(KERN_INFO "GPIO: module ERROR:%d\n", err);
651 return err;
652}
653
654static int __devexit gpio_remove(struct platform_device *pdev)
655{
656 int i;
657
658 /* Turn off the GPIO block */
659 writel(0x00000000U, virtbase + U300_GPIO_CR);
660 for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
661 free_irq(gpio_ports[i].irq, &gpio_ports[i]);
662 iounmap(virtbase);
663 release_mem_region(memres->start, memres->end - memres->start);
664 clk_disable(clk);
665 clk_put(clk);
666 return 0;
667}
668
669static struct platform_driver gpio_driver = {
670 .driver = {
671 .name = "u300-gpio",
672 },
673 .probe = gpio_probe,
674 .remove = __devexit_p(gpio_remove),
675};
676
677
678static int __init u300_gpio_init(void)
679{
680 return platform_driver_register(&gpio_driver);
681}
682
683static void __exit u300_gpio_exit(void)
684{
685 platform_driver_unregister(&gpio_driver);
686}
687
688arch_initcall(u300_gpio_init);
689module_exit(u300_gpio_exit);
690
691MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
692
693#ifdef U300_COH901571_3
694MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
695#endif
696
697#ifdef U300_COH901335
698MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
699#endif
700
701MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
new file mode 100644
index 000000000000..c8174128d7eb
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -0,0 +1,290 @@
1/*
2 *
3 * arch/arm/mach-u300/include/mach/gpio.h
4 *
5 *
6 * Copyright (C) 2007-2009 ST-Ericsson AB
7 * License terms: GNU General Public License (GPL) version 2
8 * GPIO block resgister definitions and inline macros for
9 * U300 GPIO COH 901 335 or COH 901 571/3
10 * Author: Linus Walleij <linus.walleij@stericsson.com>
11 */
12
13#ifndef __MACH_U300_GPIO_H
14#define __MACH_U300_GPIO_H
15
16#include <linux/kernel.h>
17#include <linux/io.h>
18#include <mach/hardware.h>
19#include <asm/irq.h>
20
21/* Switch type depending on platform/chip variant */
22#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
23#define U300_COH901335
24#endif
25#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
26#define U300_COH901571_3
27#endif
28
29/* Get base address for regs here */
30#include "u300-regs.h"
31/* IRQ numbers */
32#include "irqs.h"
33
34/*
35 * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
36 * used for anything, and often is. The event/enable etc figures are for
37 * the lowermost pin (pin 0 on each port), shift this left to match your
38 * pin if you're gonna use these values.
39 */
40#ifdef U300_COH901335
41#define U300_GPIO_PORTX_SPACING (0x1C)
42/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
43#define U300_GPIO_PXPDIR (0x00)
44#define U300_GPIO_PXPDOR (0x00)
45/* Port X Pin Config Register 32bit (R/W) */
46#define U300_GPIO_PXPCR (0x04)
47#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
48#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
49#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
50#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
51#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
52#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
53#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
54/* Port X Interrupt Event Register 32bit (R/W) */
55#define U300_GPIO_PXIEV (0x08)
56#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
57#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
58/* Port X Interrupt Enable Register 32bit (R/W) */
59#define U300_GPIO_PXIEN (0x0C)
60#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
61#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
62/* Port X Interrupt Force Register 32bit (R/W) */
63#define U300_GPIO_PXIFR (0x10)
64#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
65#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
66/* Port X Interrupt Config Register 32bit (R/W) */
67#define U300_GPIO_PXICR (0x14)
68#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
69#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
70#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
71#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
72/* Port X Pull-up Enable Register 32bit (R/W) */
73#define U300_GPIO_PXPER (0x18)
74#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
75#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
76/* Control Register 32bit (R/W) */
77#define U300_GPIO_CR (0x54)
78#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
79/* three ports of 8 bits each = GPIO pins 0..23 */
80#define U300_GPIO_NUM_PORTS 3
81#define U300_GPIO_PINS_PER_PORT 8
82#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
83#endif
84
85#ifdef U300_COH901571_3
86/*
87 * Control Register 32bit (R/W)
88 * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
89 * gives the number of GPIO pins.
90 * bit 8-2 (mask 0x000001FC) contains the core version ID.
91 */
92#define U300_GPIO_CR (0x00)
93#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
94#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
95#define U300_GPIO_PORTX_SPACING (0x30)
96/* Port X Pin Data INPUT Register 32bit (R/W) */
97#define U300_GPIO_PXPDIR (0x04)
98/* Port X Pin Data OUTPUT Register 32bit (R/W) */
99#define U300_GPIO_PXPDOR (0x08)
100/* Port X Pin Config Register 32bit (R/W) */
101#define U300_GPIO_PXPCR (0x0C)
102#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
103#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
104#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
105#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
106#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
107#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
108#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
109/* Port X Pull-up Enable Register 32bit (R/W) */
110#define U300_GPIO_PXPER (0x10)
111#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
112#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
113/* Port X Interrupt Event Register 32bit (R/W) */
114#define U300_GPIO_PXIEV (0x14)
115#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
116#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
117/* Port X Interrupt Enable Register 32bit (R/W) */
118#define U300_GPIO_PXIEN (0x18)
119#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
120#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
121/* Port X Interrupt Force Register 32bit (R/W) */
122#define U300_GPIO_PXIFR (0x1C)
123#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
124#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
125/* Port X Interrupt Config Register 32bit (R/W) */
126#define U300_GPIO_PXICR (0x20)
127#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
128#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
129#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
130#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
131#ifdef CONFIG_MACH_U300_BS335
132/* seven ports of 8 bits each = GPIO pins 0..55 */
133#define U300_GPIO_NUM_PORTS 7
134#else
135/* five ports of 8 bits each = GPIO pins 0..39 */
136#define U300_GPIO_NUM_PORTS 5
137#endif
138#define U300_GPIO_PINS_PER_PORT 8
139#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
140#endif
141
142/*
143 * Individual pin assignments for the B26/S26. Notice that the
144 * actual usage of these pins depends on the PAD MUX settings, that
145 * is why the same number can potentially appear several times.
146 * In the reference design each pin is only used for one purpose.
147 * These were determined by inspecting the B26/S26 schematic:
148 * 2/1911-ROA 128 1603
149 */
150#ifdef CONFIG_MACH_U300_BS2X
151#define U300_GPIO_PIN_UART_RX 0
152#define U300_GPIO_PIN_UART_TX 1
153#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
154#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
155#define U300_GPIO_PIN_CAM_SLEEP 4
156#define U300_GPIO_PIN_CAM_REG_EN 5
157#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
158#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
159
160#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
161#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
162#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
163#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
164#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
165#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
166#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
167#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
168
169#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
170#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
171#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
172#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
173#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
174#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
175#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
176#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
177#endif
178
179/*
180 * Individual pin assignments for the B330/S330 and B365/S365.
181 * Notice that the actual usage of these pins depends on the
182 * PAD MUX settings, that is why the same number can potentially
183 * appear several times. In the reference design each pin is only
184 * used for one purpose. These were determined by inspecting the
185 * S365 schematic.
186 */
187#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
188 defined(CONFIG_MACH_U300_BS335)
189#define U300_GPIO_PIN_UART_RX 0
190#define U300_GPIO_PIN_UART_TX 1
191#define U300_GPIO_PIN_UART_CTS 2
192#define U300_GPIO_PIN_UART_RTS 3
193#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
194#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
195#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
196#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
197
198#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
199#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
200#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
201#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
202#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
203#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
204#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
205#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
206
207#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
208#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
209#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
210#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
211#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
212#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
213#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
214#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
215
216#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
217#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
218#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
219#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
220#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
221#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
222#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
223#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
224
225#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
226#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
227#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
228#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
229#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
230#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
231#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
232#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
233
234#ifdef CONFIG_MACH_U300_BS335
235
236#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
237#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
238#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
239#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
240#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
241#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
242#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
243#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
244
245#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
246#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
247#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
248#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
249#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
250#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
251#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
252#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
253#endif
254
255#endif
256
257/* translates a pin number to a port number */
258#define PIN_TO_PORT(val) (val >> 3)
259
260/* These can be found in arch/arm/mach-u300/gpio.c */
261extern int gpio_request(unsigned gpio, const char *label);
262extern void gpio_free(unsigned gpio);
263extern int gpio_direction_input(unsigned gpio);
264extern int gpio_direction_output(unsigned gpio, int value);
265extern int gpio_register_callback(unsigned gpio,
266 int (*func)(void *arg),
267 void *);
268extern int gpio_unregister_callback(unsigned gpio);
269extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
270extern void disable_irq_on_gpio_pin(unsigned gpio);
271extern void gpio_pullup(unsigned gpio, int value);
272extern int gpio_get_value(unsigned gpio);
273extern void gpio_set_value(unsigned gpio, int value);
274
275/* wrappers to sleep-enable the previous two functions */
276static inline unsigned gpio_to_irq(unsigned gpio)
277{
278 return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
279}
280
281static inline unsigned irq_to_gpio(unsigned irq)
282{
283 /*
284 * FIXME: This is no 1-1 mapping at all, it points to the
285 * whole block of 8 pins.
286 */
287 return (irq - IRQ_U300_GPIO_PORT0) << 3;
288}
289
290#endif
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
new file mode 100644
index 000000000000..f3664564f086
--- /dev/null
+++ b/arch/arm/mach-u300/padmux.c
@@ -0,0 +1,58 @@
1/*
2 *
3 * arch/arm/mach-u300/padmux.c
4 *
5 *
6 * Copyright (C) 2009 ST-Ericsson AB
7 * License terms: GNU General Public License (GPL) version 2
8 * U300 PADMUX functions
9 * Author: Linus Walleij <linus.walleij@stericsson.com>
10 *
11 */
12#include <linux/io.h>
13#include <linux/err.h>
14#include <mach/u300-regs.h>
15#include <mach/syscon.h>
16
17#include "padmux.h"
18
19/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
20void pmx_set_mission_mode_mmc(void)
21{
22 u16 val;
23
24 val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
25 val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
26 writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
27 val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
28 val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
29 val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
30 writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
31}
32
33void pmx_set_mission_mode_spi(void)
34{
35 u16 val;
36
37 /* Set up padmuxing so the SPI port and its chipselects are active */
38 val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
39 /*
40 * Activate the SPI port (disable the use of these pins for generic
41 * GPIO, DSP, AAIF
42 */
43 val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
44 val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
45 /*
46 * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
47 * things also)
48 */
49 val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
50 val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
51 /*
52 * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
53 * things also)
54 */
55 val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
56 val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
57 writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
58}
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
new file mode 100644
index 000000000000..8c2099ac5046
--- /dev/null
+++ b/arch/arm/mach-u300/padmux.h
@@ -0,0 +1,19 @@
1/*
2 *
3 * arch/arm/mach-u300/padmux.h
4 *
5 *
6 * Copyright (C) 2009 ST-Ericsson AB
7 * License terms: GNU General Public License (GPL) version 2
8 * U300 PADMUX API
9 * Author: Linus Walleij <linus.walleij@stericsson.com>
10 *
11 */
12
13#ifndef __MACH_U300_PADMUX_H
14#define __MACH_U300_PADMUX_H
15
16void pmx_set_mission_mode_mmc(void);
17void pmx_set_mission_mode_spi(void);
18
19#endif
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-29 23:13:02 -0500