ARM: u300: localize GPIO assignments

Move the GPIO assignments for the U300 variants down to a local
header file in the mach-u300 directory. There is no point in
broadcasting this across the entire kernel.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 114 insertions, 0 deletions

diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h
new file mode 100644
index 000000000000..847dc25300c6
--- /dev/null
+++ b/arch/arm/mach-u300/u300-gpio.h
@@ -0,0 +1,114 @@
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX           0
+#define U300_GPIO_PIN_UART_TX           1
+#define U300_GPIO_PIN_GPIO02            2  /* Unrouted */
+#define U300_GPIO_PIN_GPIO03            3  /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP         4
+#define U300_GPIO_PIN_CAM_REG_EN        5
+#define U300_GPIO_PIN_GPIO06            6  /* Unrouted */
+#define U300_GPIO_PIN_GPIO07            7  /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08            8  /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09            9  /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE          10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET        11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD            12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE         13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14            14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15            15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16            16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17            17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18            18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19            19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20            20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21            21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22            22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23            23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+    defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX           0
+#define U300_GPIO_PIN_UART_TX           1
+#define U300_GPIO_PIN_UART_CTS          2
+#define U300_GPIO_PIN_UART_RTS          3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY  4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05            5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD             6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07            7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08            8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09            9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10            10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET        11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD            12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY   13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14            14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15            15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16            16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE          17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18            18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19            19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20            20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21            21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22            22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23            23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24            24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25            25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26            26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27            27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28            28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29            29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30            30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31            31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32            32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33            33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34            34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35            35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36            36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37            37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38            38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39            39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40            40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41            41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42            42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43            43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44            44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45            45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46            46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47            47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48            48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49            49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50            50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51            51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52            52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53            53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54            54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55            55 /* Unrouted */
+#endif
+
+#endif