Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (272 commits)
  Fix soc_common PCMCIA configuration
  ARM: 5827/1: SA1100: h3100/h3600: emit messages on failed gpio_request
  ARM: 5826/1: SA1100: h3100/h3600: always build htc-egpio driver
  ARM: 5825/1: SA1100: h3600: update defconfig
  ARM: 5824/1: SA1100: reuse h3600 PCMCIA driver on h3100
  ARM: 5823/1: SA1100: h3100/h3600: add support for gpio-keys
  ARM: 5822/1: SA1100: h3100/h3600: clean up #includes
  ARM: 5821/1: SA1100: h3100/h3600: revise copyright boilerplates
  ARM: 5820/1: SA1100: h3100/h3600: split h3600.c
  ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.h
  ARM: 5818/1: SA1100: h3100/h3600: drop old GPIO definitions
  ARM: 5817/1: SA1100: h3100/h3600: configure all unused gpios as inputs
  ARM: 5816/1: SA1100: h3600: remove IRQ_GPIO_* definitions
  ARM: 5815/1: SA1100: h3100/h3600: remove now unused assign_h3600_egpio handlers
  ARM: 5814/1: SA1100: h3100/h3600: convert all users of assign_h3600_egpio to gpiolib
  ARM: 5813/1: SA1100: h3100/h3600: add htc-egpio driver
  ARM: 5812/1: SA1100: h3100/h3600: separate machine-specific LCD helpers
  ARM: 5811/2: pcmcia: convert sa1100_h3600 driver to gpiolib
  ARM: 5799/1: SA1100: h3600: stop setting direction for LCD pins
  ARM: 5798/1: SA1100: h3600: remove unused cruft from h3600.h
  ...

1 files changed, 88 insertions, 0 deletions

diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
new file mode 100644
index 000000000000..9c53f01c62eb
--- /dev/null
+++ b/arch/arm/mach-u300/regulator.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-u300/regulator.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Handle board-bound regulators and board power not related
+ * to any devices.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+/* Those are just for writing in syscon */
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+/*
+ * Regulators that power the board and chip and which are
+ * not copuled to specific drivers are hogged in these
+ * instances.
+ */
+static struct regulator *main_power_15;
+
+/*
+ * This function is used from pm.h to shut down the system by
+ * resetting all regulators in turn and then disable regulator
+ * LDO D (main power).
+ */
+void u300_pm_poweroff(void)
+{
+        sigset_t old, all;
+
+        sigfillset(&all);
+        if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+                /* Disable LDO D to shut down the system */
+                if (main_power_15)
+                        regulator_disable(main_power_15);
+                else
+                        pr_err("regulator not available to shut down system\n");
+                (void) sigprocmask(SIG_SETMASK, &old, NULL);
+        }
+        return;
+}
+
+/*
+ * Hog the regulators needed to power up the board.
+ */
+static int __init u300_init_boardpower(void)
+{
+        int err;
+        u32 val;
+
+        pr_info("U300: setting up board power\n");
+        main_power_15 = regulator_get(NULL, "vana15");
+        if (IS_ERR(main_power_15)) {
+                pr_err("could not get vana15");
+                return PTR_ERR(main_power_15);
+        }
+        err = regulator_enable(main_power_15);
+        if (err) {
+                pr_err("could not enable vana15\n");
+                return err;
+        }
+
+        /*
+         * On U300 a special system controller register pulls up the DC
+         * until the vana15 (LDO D) regulator comes up. At this point, all
+         * regulators are set and we do not need power control via
+         * DC ON anymore. This function will likely be moved whenever
+         * the rest of the U300 power management is implemented.
+         */
+        pr_info("U300: disable system controller pull-up\n");
+        val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+        val &= ~U300_SYSCON_PMCR_DCON_ENABLE;
+        writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+
+        /* Register globally exported PM poweroff hook */
+        pm_power_off = u300_pm_poweroff;
+
+        return 0;
+}
+
+/*
+ * So at module init time we hog the regulator!
+ */
+module_init(u300_init_boardpower);