ARM: mach-shmobile: ap4evb: Add HDMI sound support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 45 insertions, 1 deletions

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 46ca4d4abf91..32d9e2816e56 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -565,12 +565,50 @@ static struct platform_device *qhd_devices[] __initdata = {
 
 /* FSI */
 #define IRQ_FSI         evt2irq(0x1840)
+
+static int fsi_set_rate(int is_porta, int rate)
+{
+        struct clk *fsib_clk;
+        struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+        int ret;
+
+        /* set_rate is not needed if port A */
+        if (is_porta)
+                return 0;
+
+        fsib_clk = clk_get(NULL, "fsib_clk");
+        if (IS_ERR(fsib_clk))
+                return -EINVAL;
+
+        switch (rate) {
+        case 48000:
+                clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
+                clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
+                ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+                break;
+        default:
+                pr_err("unsupported rate in FSI2 port B\n");
+                ret = -EINVAL;
+                break;
+        }
+
+        clk_put(fsib_clk);
+
+        return ret;
+}
+
 static struct sh_fsi_platform_info fsi_info = {
         .porta_flags = SH_FSI_BRS_INV |
                        SH_FSI_OUT_SLAVE_MODE |
                        SH_FSI_IN_SLAVE_MODE |
                        SH_FSI_OFMT(PCM) |
                        SH_FSI_IFMT(PCM),
+
+        .portb_flags = SH_FSI_BRS_INV |
+                       SH_FSI_BRM_INV |
+                       SH_FSI_LRS_INV |
+                       SH_FSI_OFMT(SPDIF),
+        .set_rate = fsi_set_rate,
 };
 
 static struct resource fsi_resources[] = {
@@ -634,6 +672,7 @@ static struct platform_device lcdc1_device = {
 static struct sh_mobile_hdmi_info hdmi_info = {
         .lcd_chan = &sh_mobile_lcdc1_info.ch[0],
         .lcd_dev = &lcdc1_device.dev,
+        .flags = HDMI_SND_SRC_SPDIF,
 };
 
 static struct resource hdmi_resources[] = {
@@ -992,6 +1031,7 @@ static void __init ap4evb_map_io(void)
 
 #define GPIO_PORT9CR    0xE6051009
 #define GPIO_PORT10CR   0xE605100A
+#define USCCR1          0xE6058144
 static void __init ap4evb_init(void)
 {
         u32 srcr4;
@@ -1062,7 +1102,7 @@ static void __init ap4evb_init(void)
         /* setup USB phy */
         __raw_writew(0x8a0a, 0xE6058130);       /* USBCR2 */
 
-        /* enable FSI2 */
+        /* enable FSI2 port A (ak4643) */
         gpio_request(GPIO_FN_FSIAIBT,   NULL);
         gpio_request(GPIO_FN_FSIAILR,   NULL);
         gpio_request(GPIO_FN_FSIAISLD,  NULL);
@@ -1079,6 +1119,10 @@ static void __init ap4evb_init(void)
         gpio_request(GPIO_PORT41, NULL);
         gpio_direction_input(GPIO_PORT41);
 
+        /* setup FSI2 port B (HDMI) */
+        gpio_request(GPIO_FN_FSIBCK, NULL);
+        __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
+
         /* set SPU2 clock to 119.6 MHz */
         clk = clk_get(NULL, "spu_clk");
         if (!IS_ERR(clk)) {