aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-sa1100/h3600.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/arm/mach-sa1100/h3600.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/arm/mach-sa1100/h3600.c')
-rw-r--r--arch/arm/mach-sa1100/h3600.c892
1 files changed, 892 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
new file mode 100644
index 000000000000..9788d3aefa73
--- /dev/null
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -0,0 +1,892 @@
1/*
2 * Hardware definitions for Compaq iPAQ H3xxx Handheld Computers
3 *
4 * Copyright 2000,1 Compaq Computer Corporation.
5 *
6 * Use consistent with the GNU GPL is permitted,
7 * provided that this copyright notice is
8 * preserved in its entirety in all copies and derived works.
9 *
10 * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
11 * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
12 * FITNESS FOR ANY PARTICULAR PURPOSE.
13 *
14 * Author: Jamey Hicks.
15 *
16 * History:
17 *
18 * 2001-10-?? Andrew Christian Added support for iPAQ H3800
19 * and abstracted EGPIO interface.
20 *
21 */
22#include <linux/config.h>
23#include <linux/module.h>
24#include <linux/init.h>
25#include <linux/kernel.h>
26#include <linux/tty.h>
27#include <linux/pm.h>
28#include <linux/device.h>
29#include <linux/mtd/mtd.h>
30#include <linux/mtd/partitions.h>
31#include <linux/serial_core.h>
32
33#include <asm/irq.h>
34#include <asm/hardware.h>
35#include <asm/mach-types.h>
36#include <asm/setup.h>
37
38#include <asm/mach/irq.h>
39#include <asm/mach/arch.h>
40#include <asm/mach/flash.h>
41#include <asm/mach/irda.h>
42#include <asm/mach/map.h>
43#include <asm/mach/serial_sa1100.h>
44
45#include <asm/arch/h3600.h>
46
47#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
48#include <asm/arch/h3600_gpio.h>
49#endif
50
51#ifdef CONFIG_SA1100_H3800
52#include <asm/arch/h3600_asic.h>
53#endif
54
55#include "generic.h"
56
57struct ipaq_model_ops ipaq_model_ops;
58EXPORT_SYMBOL(ipaq_model_ops);
59
60static struct mtd_partition h3xxx_partitions[] = {
61 {
62 .name = "H3XXX boot firmware",
63 .size = 0x00040000,
64 .offset = 0,
65 .mask_flags = MTD_WRITEABLE, /* force read-only */
66 }, {
67#ifdef CONFIG_MTD_2PARTS_IPAQ
68 .name = "H3XXX root jffs2",
69 .size = MTDPART_SIZ_FULL,
70 .offset = 0x00040000,
71#else
72 .name = "H3XXX kernel",
73 .size = 0x00080000,
74 .offset = 0x00040000,
75 }, {
76 .name = "H3XXX params",
77 .size = 0x00040000,
78 .offset = 0x000C0000,
79 }, {
80#ifdef CONFIG_JFFS2_FS
81 .name = "H3XXX root jffs2",
82 .size = MTDPART_SIZ_FULL,
83 .offset = 0x00100000,
84#else
85 .name = "H3XXX initrd",
86 .size = 0x00100000,
87 .offset = 0x00100000,
88 }, {
89 .name = "H3XXX root cramfs",
90 .size = 0x00300000,
91 .offset = 0x00200000,
92 }, {
93 .name = "H3XXX usr cramfs",
94 .size = 0x00800000,
95 .offset = 0x00500000,
96 }, {
97 .name = "H3XXX usr local",
98 .size = MTDPART_SIZ_FULL,
99 .offset = 0x00d00000,
100#endif
101#endif
102 }
103};
104
105static void h3xxx_set_vpp(int vpp)
106{
107 assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, vpp);
108}
109
110static struct flash_platform_data h3xxx_flash_data = {
111 .map_name = "cfi_probe",
112 .set_vpp = h3xxx_set_vpp,
113 .parts = h3xxx_partitions,
114 .nr_parts = ARRAY_SIZE(h3xxx_partitions),
115};
116
117static struct resource h3xxx_flash_resource = {
118 .start = SA1100_CS0_PHYS,
119 .end = SA1100_CS0_PHYS + SZ_32M - 1,
120 .flags = IORESOURCE_MEM,
121};
122
123/*
124 * This turns the IRDA power on or off on the Compaq H3600
125 */
126static int h3600_irda_set_power(struct device *dev, unsigned int state)
127{
128 assign_h3600_egpio( IPAQ_EGPIO_IR_ON, state );
129
130 return 0;
131}
132
133static void h3600_irda_set_speed(struct device *dev, int speed)
134{
135 if (speed < 4000000) {
136 clr_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
137 } else {
138 set_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
139 }
140}
141
142static struct irda_platform_data h3600_irda_data = {
143 .set_power = h3600_irda_set_power,
144 .set_speed = h3600_irda_set_speed,
145};
146
147static void h3xxx_mach_init(void)
148{
149 sa11x0_set_flash_data(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
150 sa11x0_set_irda_data(&h3600_irda_data);
151}
152
153/*
154 * low-level UART features
155 */
156
157static void h3600_uart_set_mctrl(struct uart_port *port, u_int mctrl)
158{
159 if (port->mapbase == _Ser3UTCR0) {
160 if (mctrl & TIOCM_RTS)
161 GPCR = GPIO_H3600_COM_RTS;
162 else
163 GPSR = GPIO_H3600_COM_RTS;
164 }
165}
166
167static u_int h3600_uart_get_mctrl(struct uart_port *port)
168{
169 u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
170
171 if (port->mapbase == _Ser3UTCR0) {
172 int gplr = GPLR;
173 /* DCD and CTS bits are inverted in GPLR by RS232 transceiver */
174 if (gplr & GPIO_H3600_COM_DCD)
175 ret &= ~TIOCM_CD;
176 if (gplr & GPIO_H3600_COM_CTS)
177 ret &= ~TIOCM_CTS;
178 }
179
180 return ret;
181}
182
183static void h3600_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
184{
185 if (port->mapbase == _Ser2UTCR0) { /* TODO: REMOVE THIS */
186 assign_h3600_egpio(IPAQ_EGPIO_IR_ON, !state);
187 } else if (port->mapbase == _Ser3UTCR0) {
188 assign_h3600_egpio(IPAQ_EGPIO_RS232_ON, !state);
189 }
190}
191
192/*
193 * Enable/Disable wake up events for this serial port.
194 * Obviously, we only support this on the normal COM port.
195 */
196static int h3600_uart_set_wake(struct uart_port *port, u_int enable)
197{
198 int err = -EINVAL;
199
200 if (port->mapbase == _Ser3UTCR0) {
201 if (enable)
202 PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
203 else
204 PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
205 err = 0;
206 }
207 return err;
208}
209
210static struct sa1100_port_fns h3600_port_fns __initdata = {
211 .set_mctrl = h3600_uart_set_mctrl,
212 .get_mctrl = h3600_uart_get_mctrl,
213 .pm = h3600_uart_pm,
214 .set_wake = h3600_uart_set_wake,
215};
216
217/*
218 * helper for sa1100fb
219 */
220static void h3xxx_lcd_power(int enable)
221{
222 assign_h3600_egpio(IPAQ_EGPIO_LCD_POWER, enable);
223}
224
225static struct map_desc h3600_io_desc[] __initdata = {
226 /* virtual physical length type */
227 { H3600_BANK_2_VIRT, SA1100_CS2_PHYS, 0x02800000, MT_DEVICE }, /* static memory bank 2 CS#2 */
228 { H3600_BANK_4_VIRT, SA1100_CS4_PHYS, 0x00800000, MT_DEVICE }, /* static memory bank 4 CS#4 */
229 { H3600_EGPIO_VIRT, H3600_EGPIO_PHYS, 0x01000000, MT_DEVICE }, /* EGPIO 0 CS#5 */
230};
231
232/*
233 * Common map_io initialization
234 */
235
236static void __init h3xxx_map_io(void)
237{
238 sa1100_map_io();
239 iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
240
241 sa1100_register_uart_fns(&h3600_port_fns);
242 sa1100_register_uart(0, 3); /* Common serial port */
243// sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
244
245 /* Ensure those pins are outputs and driving low */
246 PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
247 PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
248
249 /* Configure suspend conditions */
250 PGSR = 0;
251 PWER = PWER_GPIO0 | PWER_RTC;
252 PCFR = PCFR_OPDE;
253 PSDR = 0;
254
255 sa1100fb_lcd_power = h3xxx_lcd_power;
256}
257
258static __inline__ void do_blank(int setp)
259{
260 if (ipaq_model_ops.blank_callback)
261 ipaq_model_ops.blank_callback(1-setp);
262}
263
264/************************* H3100 *************************/
265
266#ifdef CONFIG_SA1100_H3100
267
268#define H3100_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT)
269static unsigned int h3100_egpio = 0;
270
271static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
272{
273 unsigned int egpio = 0;
274 long gpio = 0;
275 unsigned long flags;
276
277 switch (x) {
278 case IPAQ_EGPIO_LCD_POWER:
279 egpio |= EGPIO_H3600_LCD_ON;
280 gpio |= GPIO_H3100_LCD_3V_ON;
281 do_blank(setp);
282 break;
283 case IPAQ_EGPIO_LCD_ENABLE:
284 break;
285 case IPAQ_EGPIO_CODEC_NRESET:
286 egpio |= EGPIO_H3600_CODEC_NRESET;
287 break;
288 case IPAQ_EGPIO_AUDIO_ON:
289 gpio |= GPIO_H3100_AUD_PWR_ON
290 | GPIO_H3100_AUD_ON;
291 break;
292 case IPAQ_EGPIO_QMUTE:
293 gpio |= GPIO_H3100_QMUTE;
294 break;
295 case IPAQ_EGPIO_OPT_NVRAM_ON:
296 egpio |= EGPIO_H3600_OPT_NVRAM_ON;
297 break;
298 case IPAQ_EGPIO_OPT_ON:
299 egpio |= EGPIO_H3600_OPT_ON;
300 break;
301 case IPAQ_EGPIO_CARD_RESET:
302 egpio |= EGPIO_H3600_CARD_RESET;
303 break;
304 case IPAQ_EGPIO_OPT_RESET:
305 egpio |= EGPIO_H3600_OPT_RESET;
306 break;
307 case IPAQ_EGPIO_IR_ON:
308 gpio |= GPIO_H3100_IR_ON;
309 break;
310 case IPAQ_EGPIO_IR_FSEL:
311 gpio |= GPIO_H3100_IR_FSEL;
312 break;
313 case IPAQ_EGPIO_RS232_ON:
314 egpio |= EGPIO_H3600_RS232_ON;
315 break;
316 case IPAQ_EGPIO_VPP_ON:
317 egpio |= EGPIO_H3600_VPP_ON;
318 break;
319 }
320
321 if (egpio || gpio) {
322 local_irq_save(flags);
323 if (setp) {
324 h3100_egpio |= egpio;
325 GPSR = gpio;
326 } else {
327 h3100_egpio &= ~egpio;
328 GPCR = gpio;
329 }
330 H3100_EGPIO = h3100_egpio;
331 local_irq_restore(flags);
332 }
333}
334
335static unsigned long h3100_read_egpio(void)
336{
337 return h3100_egpio;
338}
339
340static int h3100_pm_callback(int req)
341{
342 if (ipaq_model_ops.pm_callback_aux)
343 return ipaq_model_ops.pm_callback_aux(req);
344 return 0;
345}
346
347static struct ipaq_model_ops h3100_model_ops __initdata = {
348 .generic_name = "3100",
349 .control = h3100_control_egpio,
350 .read = h3100_read_egpio,
351 .pm_callback = h3100_pm_callback
352};
353
354#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \
355 | GPIO_H3100_GPIO3 \
356 | GPIO_H3100_QMUTE \
357 | GPIO_H3100_LCD_3V_ON \
358 | GPIO_H3100_AUD_ON \
359 | GPIO_H3100_AUD_PWR_ON \
360 | GPIO_H3100_IR_ON \
361 | GPIO_H3100_IR_FSEL)
362
363static void __init h3100_map_io(void)
364{
365 h3xxx_map_io();
366
367 /* Initialize h3100-specific values here */
368 GPCR = 0x0fffffff; /* All outputs are set low by default */
369 GPDR = GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
370 GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
371 GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
372 H3100_DIRECT_EGPIO;
373
374 /* Older bootldrs put GPIO2-9 in alternate mode on the
375 assumption that they are used for video */
376 GAFR &= ~H3100_DIRECT_EGPIO;
377
378 H3100_EGPIO = h3100_egpio;
379 ipaq_model_ops = h3100_model_ops;
380}
381
382MACHINE_START(H3100, "Compaq iPAQ H3100")
383 BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
384 BOOT_PARAMS(0xc0000100)
385 MAPIO(h3100_map_io)
386 INITIRQ(sa1100_init_irq)
387 .timer = &sa1100_timer,
388 .init_machine = h3xxx_mach_init,
389MACHINE_END
390
391#endif /* CONFIG_SA1100_H3100 */
392
393/************************* H3600 *************************/
394
395#ifdef CONFIG_SA1100_H3600
396
397#define H3600_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT)
398static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON;
399
400static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
401{
402 unsigned int egpio = 0;
403 unsigned long flags;
404
405 switch (x) {
406 case IPAQ_EGPIO_LCD_POWER:
407 egpio |= EGPIO_H3600_LCD_ON |
408 EGPIO_H3600_LCD_PCI |
409 EGPIO_H3600_LCD_5V_ON |
410 EGPIO_H3600_LVDD_ON;
411 do_blank(setp);
412 break;
413 case IPAQ_EGPIO_LCD_ENABLE:
414 break;
415 case IPAQ_EGPIO_CODEC_NRESET:
416 egpio |= EGPIO_H3600_CODEC_NRESET;
417 break;
418 case IPAQ_EGPIO_AUDIO_ON:
419 egpio |= EGPIO_H3600_AUD_AMP_ON |
420 EGPIO_H3600_AUD_PWR_ON;
421 break;
422 case IPAQ_EGPIO_QMUTE:
423 egpio |= EGPIO_H3600_QMUTE;
424 break;
425 case IPAQ_EGPIO_OPT_NVRAM_ON:
426 egpio |= EGPIO_H3600_OPT_NVRAM_ON;
427 break;
428 case IPAQ_EGPIO_OPT_ON:
429 egpio |= EGPIO_H3600_OPT_ON;
430 break;
431 case IPAQ_EGPIO_CARD_RESET:
432 egpio |= EGPIO_H3600_CARD_RESET;
433 break;
434 case IPAQ_EGPIO_OPT_RESET:
435 egpio |= EGPIO_H3600_OPT_RESET;
436 break;
437 case IPAQ_EGPIO_IR_ON:
438 egpio |= EGPIO_H3600_IR_ON;
439 break;
440 case IPAQ_EGPIO_IR_FSEL:
441 egpio |= EGPIO_H3600_IR_FSEL;
442 break;
443 case IPAQ_EGPIO_RS232_ON:
444 egpio |= EGPIO_H3600_RS232_ON;
445 break;
446 case IPAQ_EGPIO_VPP_ON:
447 egpio |= EGPIO_H3600_VPP_ON;
448 break;
449 }
450
451 if (egpio) {
452 local_irq_save(flags);
453 if (setp)
454 h3600_egpio |= egpio;
455 else
456 h3600_egpio &= ~egpio;
457 H3600_EGPIO = h3600_egpio;
458 local_irq_restore(flags);
459 }
460}
461
462static unsigned long h3600_read_egpio(void)
463{
464 return h3600_egpio;
465}
466
467static int h3600_pm_callback(int req)
468{
469 if (ipaq_model_ops.pm_callback_aux)
470 return ipaq_model_ops.pm_callback_aux(req);
471 return 0;
472}
473
474static struct ipaq_model_ops h3600_model_ops __initdata = {
475 .generic_name = "3600",
476 .control = h3600_control_egpio,
477 .read = h3600_read_egpio,
478 .pm_callback = h3600_pm_callback
479};
480
481static void __init h3600_map_io(void)
482{
483 h3xxx_map_io();
484
485 /* Initialize h3600-specific values here */
486
487 GPCR = 0x0fffffff; /* All outputs are set low by default */
488 GPDR = GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
489 GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
490 GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
491 GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
492 GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
493
494 H3600_EGPIO = h3600_egpio; /* Maintains across sleep? */
495 ipaq_model_ops = h3600_model_ops;
496}
497
498MACHINE_START(H3600, "Compaq iPAQ H3600")
499 BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
500 BOOT_PARAMS(0xc0000100)
501 MAPIO(h3600_map_io)
502 INITIRQ(sa1100_init_irq)
503 .timer = &sa1100_timer,
504 .init_machine = h3xxx_mach_init,
505MACHINE_END
506
507#endif /* CONFIG_SA1100_H3600 */
508
509#ifdef CONFIG_SA1100_H3800
510
511#define SET_ASIC1(x) \
512 do {if (setp) { H3800_ASIC1_GPIO_OUT |= (x); } else { H3800_ASIC1_GPIO_OUT &= ~(x); }} while(0)
513
514#define SET_ASIC2(x) \
515 do {if (setp) { H3800_ASIC2_GPIOPIOD |= (x); } else { H3800_ASIC2_GPIOPIOD &= ~(x); }} while(0)
516
517#define CLEAR_ASIC1(x) \
518 do {if (setp) { H3800_ASIC1_GPIO_OUT &= ~(x); } else { H3800_ASIC1_GPIO_OUT |= (x); }} while(0)
519
520#define CLEAR_ASIC2(x) \
521 do {if (setp) { H3800_ASIC2_GPIOPIOD &= ~(x); } else { H3800_ASIC2_GPIOPIOD |= (x); }} while(0)
522
523
524/*
525 On screen enable, we get
526
527 h3800_video_power_on(1)
528 LCD controller starts
529 h3800_video_lcd_enable(1)
530
531 On screen disable, we get
532
533 h3800_video_lcd_enable(0)
534 LCD controller stops
535 h3800_video_power_on(0)
536*/
537
538
539static void h3800_video_power_on(int setp)
540{
541 if (setp) {
542 H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_ON;
543 msleep(30);
544 H3800_ASIC1_GPIO_OUT |= GPIO1_VGL_ON;
545 msleep(5);
546 H3800_ASIC1_GPIO_OUT |= GPIO1_VGH_ON;
547 msleep(50);
548 H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_5V_ON;
549 msleep(5);
550 } else {
551 msleep(5);
552 H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_5V_ON;
553 msleep(50);
554 H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGL_ON;
555 msleep(5);
556 H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGH_ON;
557 msleep(100);
558 H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_ON;
559 }
560}
561
562static void h3800_video_lcd_enable(int setp)
563{
564 if (setp) {
565 msleep(17); // Wait one from before turning on
566 H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_PCI;
567 } else {
568 H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_PCI;
569 msleep(30); // Wait before turning off
570 }
571}
572
573
574static void h3800_control_egpio(enum ipaq_egpio_type x, int setp)
575{
576 switch (x) {
577 case IPAQ_EGPIO_LCD_POWER:
578 h3800_video_power_on(setp);
579 break;
580 case IPAQ_EGPIO_LCD_ENABLE:
581 h3800_video_lcd_enable(setp);
582 break;
583 case IPAQ_EGPIO_CODEC_NRESET:
584 case IPAQ_EGPIO_AUDIO_ON:
585 case IPAQ_EGPIO_QMUTE:
586 printk("%s: error - should not be called\n", __FUNCTION__);
587 break;
588 case IPAQ_EGPIO_OPT_NVRAM_ON:
589 SET_ASIC2(GPIO2_OPT_ON_NVRAM);
590 break;
591 case IPAQ_EGPIO_OPT_ON:
592 SET_ASIC2(GPIO2_OPT_ON);
593 break;
594 case IPAQ_EGPIO_CARD_RESET:
595 SET_ASIC2(GPIO2_OPT_PCM_RESET);
596 break;
597 case IPAQ_EGPIO_OPT_RESET:
598 SET_ASIC2(GPIO2_OPT_RESET);
599 break;
600 case IPAQ_EGPIO_IR_ON:
601 CLEAR_ASIC1(GPIO1_IR_ON_N);
602 break;
603 case IPAQ_EGPIO_IR_FSEL:
604 break;
605 case IPAQ_EGPIO_RS232_ON:
606 SET_ASIC1(GPIO1_RS232_ON);
607 break;
608 case IPAQ_EGPIO_VPP_ON:
609 H3800_ASIC2_FlashWP_VPP_ON = setp;
610 break;
611 }
612}
613
614static unsigned long h3800_read_egpio(void)
615{
616 return H3800_ASIC1_GPIO_OUT | (H3800_ASIC2_GPIOPIOD << 16);
617}
618
619/* We need to fix ASIC2 GPIO over suspend/resume. At the moment,
620 it doesn't appear that ASIC1 GPIO has the same problem */
621
622static int h3800_pm_callback(int req)
623{
624 static u16 asic1_data;
625 static u16 asic2_data;
626 int result = 0;
627
628 printk("%s %d\n", __FUNCTION__, req);
629
630 switch (req) {
631 case PM_RESUME:
632 MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000; /* Set MSC2 correctly */
633
634 H3800_ASIC2_GPIOPIOD = asic2_data;
635 H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
636 | GPIO2_SD_DETECT
637 | GPIO2_EAR_IN_N
638 | GPIO2_USB_DETECT_N
639 | GPIO2_SD_CON_SLT;
640
641 H3800_ASIC1_GPIO_OUT = asic1_data;
642
643 if (ipaq_model_ops.pm_callback_aux)
644 result = ipaq_model_ops.pm_callback_aux(req);
645 break;
646
647 case PM_SUSPEND:
648 if (ipaq_model_ops.pm_callback_aux &&
649 ((result = ipaq_model_ops.pm_callback_aux(req)) != 0))
650 return result;
651
652 asic1_data = H3800_ASIC1_GPIO_OUT;
653 asic2_data = H3800_ASIC2_GPIOPIOD;
654 break;
655 default:
656 printk("%s: unrecognized PM callback\n", __FUNCTION__);
657 break;
658 }
659 return result;
660}
661
662static struct ipaq_model_ops h3800_model_ops __initdata = {
663 .generic_name = "3800",
664 .control = h3800_control_egpio,
665 .read = h3800_read_egpio,
666 .pm_callback = h3800_pm_callback
667};
668
669#define MAX_ASIC_ISR_LOOPS 20
670
671/* The order of these is important - see #include <asm/arch/irqs.h> */
672static u32 kpio_irq_mask[] = {
673 KPIO_KEY_ALL,
674 KPIO_SPI_INT,
675 KPIO_OWM_INT,
676 KPIO_ADC_INT,
677 KPIO_UART_0_INT,
678 KPIO_UART_1_INT,
679 KPIO_TIMER_0_INT,
680 KPIO_TIMER_1_INT,
681 KPIO_TIMER_2_INT
682};
683
684static u32 gpio_irq_mask[] = {
685 GPIO2_PEN_IRQ,
686 GPIO2_SD_DETECT,
687 GPIO2_EAR_IN_N,
688 GPIO2_USB_DETECT_N,
689 GPIO2_SD_CON_SLT,
690};
691
692static void h3800_IRQ_demux(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
693{
694 int i;
695
696 if (0) printk("%s: interrupt received\n", __FUNCTION__);
697
698 desc->chip->ack(irq);
699
700 for (i = 0; i < MAX_ASIC_ISR_LOOPS && (GPLR & GPIO_H3800_ASIC); i++) {
701 u32 irq;
702 int j;
703
704 /* KPIO */
705 irq = H3800_ASIC2_KPIINTFLAG;
706 if (0) printk("%s KPIO 0x%08X\n", __FUNCTION__, irq);
707 for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
708 if (irq & kpio_irq_mask[j])
709 do_edge_IRQ(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j, regs);
710
711 /* GPIO2 */
712 irq = H3800_ASIC2_GPIINTFLAG;
713 if (0) printk("%s GPIO 0x%08X\n", __FUNCTION__, irq);
714 for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
715 if (irq & gpio_irq_mask[j])
716 do_edge_IRQ(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j , regs);
717 }
718
719 if (i >= MAX_ASIC_ISR_LOOPS)
720 printk("%s: interrupt processing overrun\n", __FUNCTION__);
721
722 /* For level-based interrupts */
723 desc->chip->unmask(irq);
724
725}
726
727static struct irqaction h3800_irq = {
728 .name = "h3800_asic",
729 .handler = h3800_IRQ_demux,
730 .flags = SA_INTERRUPT,
731};
732
733u32 kpio_int_shadow = 0;
734
735
736/* mask_ack <- IRQ is first serviced.
737 mask <- IRQ is disabled.
738 unmask <- IRQ is enabled
739
740 The INTCLR registers are poorly documented. I believe that writing
741 a "1" to the register clears the specific interrupt, but the documentation
742 indicates writing a "0" clears the interrupt. In any case, they shouldn't
743 be read (that's the INTFLAG register)
744 */
745
746static void h3800_mask_ack_kpio_irq(unsigned int irq)
747{
748 u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
749 kpio_int_shadow &= ~mask;
750 H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
751 H3800_ASIC2_KPIINTCLR = mask;
752}
753
754static void h3800_mask_kpio_irq(unsigned int irq)
755{
756 u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
757 kpio_int_shadow &= ~mask;
758 H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
759}
760
761static void h3800_unmask_kpio_irq(unsigned int irq)
762{
763 u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
764 kpio_int_shadow |= mask;
765 H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
766}
767
768static void h3800_mask_ack_gpio_irq(unsigned int irq)
769{
770 u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
771 H3800_ASIC2_GPIINTSTAT &= ~mask;
772 H3800_ASIC2_GPIINTCLR = mask;
773}
774
775static void h3800_mask_gpio_irq(unsigned int irq)
776{
777 u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
778 H3800_ASIC2_GPIINTSTAT &= ~mask;
779 }
780
781static void h3800_unmask_gpio_irq(unsigned int irq)
782{
783 u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
784 H3800_ASIC2_GPIINTSTAT |= mask;
785}
786
787static void __init h3800_init_irq(void)
788{
789 int i;
790
791 /* Initialize standard IRQs */
792 sa1100_init_irq();
793
794 /* Disable all IRQs and set up clock */
795 H3800_ASIC2_KPIINTSTAT = 0; /* Disable all interrupts */
796 H3800_ASIC2_GPIINTSTAT = 0;
797
798 H3800_ASIC2_KPIINTCLR = 0; /* Clear all KPIO interrupts */
799 H3800_ASIC2_GPIINTCLR = 0; /* Clear all GPIO interrupts */
800
801// H3800_ASIC2_KPIINTCLR = 0xffff; /* Clear all KPIO interrupts */
802// H3800_ASIC2_GPIINTCLR = 0xffff; /* Clear all GPIO interrupts */
803
804 H3800_ASIC2_CLOCK_Enable |= ASIC2_CLOCK_EX0; /* 32 kHZ crystal on */
805 H3800_ASIC2_INTR_ClockPrescale |= ASIC2_INTCPS_SET;
806 H3800_ASIC2_INTR_ClockPrescale = ASIC2_INTCPS_CPS(0x0e) | ASIC2_INTCPS_SET;
807 H3800_ASIC2_INTR_TimerSet = 1;
808
809#if 0
810 for (i = 0; i < H3800_KPIO_IRQ_COUNT; i++) {
811 int irq = i + H3800_KPIO_IRQ_START;
812 irq_desc[irq].valid = 1;
813 irq_desc[irq].probe_ok = 1;
814 set_irq_chip(irq, &h3800_kpio_irqchip);
815 }
816
817 for (i = 0; i < H3800_GPIO_IRQ_COUNT; i++) {
818 int irq = i + H3800_GPIO_IRQ_START;
819 irq_desc[irq].valid = 1;
820 irq_desc[irq].probe_ok = 1;
821 set_irq_chip(irq, &h3800_gpio_irqchip);
822 }
823#endif
824 set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING);
825 set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, &h3800_IRQ_demux);
826}
827
828
829#define ASIC1_OUTPUTS 0x7fff /* First 15 bits are used */
830
831static void __init h3800_map_io(void)
832{
833 h3xxx_map_io();
834
835 /* Add wakeup on AC plug/unplug */
836 PWER |= PWER_GPIO12;
837
838 /* Initialize h3800-specific values here */
839 GPCR = 0x0fffffff; /* All outputs are set low by default */
840 GAFR = GPIO_H3800_CLK_OUT |
841 GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
842 GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
843 GPDR = GPIO_H3800_CLK_OUT |
844 GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
845 GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
846 GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
847 GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
848 TUCR = TUCR_3_6864MHz; /* Seems to be used only for the Bluetooth UART */
849
850 /* Fix the memory bus */
851 MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000;
852
853 /* Set up ASIC #1 */
854 H3800_ASIC1_GPIO_DIR = ASIC1_OUTPUTS; /* All outputs */
855 H3800_ASIC1_GPIO_MASK = ASIC1_OUTPUTS; /* No interrupts */
856 H3800_ASIC1_GPIO_SLEEP_MASK = ASIC1_OUTPUTS;
857 H3800_ASIC1_GPIO_SLEEP_DIR = ASIC1_OUTPUTS;
858 H3800_ASIC1_GPIO_SLEEP_OUT = GPIO1_EAR_ON_N;
859 H3800_ASIC1_GPIO_BATT_FAULT_DIR = ASIC1_OUTPUTS;
860 H3800_ASIC1_GPIO_BATT_FAULT_OUT = GPIO1_EAR_ON_N;
861
862 H3800_ASIC1_GPIO_OUT = GPIO1_IR_ON_N
863 | GPIO1_RS232_ON
864 | GPIO1_EAR_ON_N;
865
866 /* Set up ASIC #2 */
867 H3800_ASIC2_GPIOPIOD = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
868 H3800_ASIC2_GPOBFSTAT = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
869
870 H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
871 | GPIO2_SD_DETECT
872 | GPIO2_EAR_IN_N
873 | GPIO2_USB_DETECT_N
874 | GPIO2_SD_CON_SLT;
875
876 /* TODO : Set sleep states & battery fault states */
877
878 /* Clear VPP Enable */
879 H3800_ASIC2_FlashWP_VPP_ON = 0;
880 ipaq_model_ops = h3800_model_ops;
881}
882
883MACHINE_START(H3800, "Compaq iPAQ H3800")
884 BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
885 BOOT_PARAMS(0xc0000100)
886 MAPIO(h3800_map_io)
887 INITIRQ(h3800_init_irq)
888 .timer = &sa1100_timer,
889 .init_machine = h3xxx_mach_init,
890MACHINE_END
891
892#endif /* CONFIG_SA1100_H3800 */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-26 08:41:35 -0500