Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 192 insertions, 0 deletions

diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
new file mode 100644
index 000000000000..99287890d396
--- /dev/null
+++ b/arch/arm/mach-sa1100/collie.c
@@ -0,0 +1,192 @@
+/*
+ * linux/arch/arm/mach-sa1100/collie.c
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * This file contains all Collie-specific tweaks.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ChangeLog:
+ *  03-06-2004 John Lenz <jelenz@wisc.edu>
+ *  06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
+ *  04-16-2001 Lineo Japan,Inc. ...
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/timer.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/arch/collie.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/serial_sa1100.h>
+
+#include <asm/hardware/scoop.h>
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/locomo.h>
+
+#include "generic.h"
+
+static struct resource collie_scoop_resources[] = {
+        [0] = {
+                .start          = 0x40800000,
+                .end            = 0x40800fff,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+static struct scoop_config collie_scoop_setup = {
+        .io_dir         = COLLIE_SCOOP_IO_DIR,
+        .io_out         = COLLIE_SCOOP_IO_OUT,
+};
+
+struct platform_device colliescoop_device = {
+        .name           = "sharp-scoop",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &collie_scoop_setup,
+        },
+        .num_resources  = ARRAY_SIZE(collie_scoop_resources),
+        .resource       = collie_scoop_resources,
+};
+
+
+static struct resource locomo_resources[] = {
+        [0] = {
+                .start          = 0x40000000,
+                .end            = 0x40001fff,
+                .flags          = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start          = IRQ_GPIO25,
+                .end            = IRQ_GPIO25,
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device locomo_device = {
+        .name           = "locomo",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(locomo_resources),
+        .resource       = locomo_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+        &locomo_device,
+        &colliescoop_device,
+};
+
+static struct mtd_partition collie_partitions[] = {
+        {
+                .name           = "bootloader",
+                .offset         = 0,
+                .size           = 0x000C0000,
+                .mask_flags     = MTD_WRITEABLE
+        }, {
+                .name           = "kernel",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 0x00100000,
+        }, {
+                .name           = "rootfs",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 0x00e20000,
+        }
+};
+
+static void collie_set_vpp(int vpp)
+{
+        write_scoop_reg(SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN);
+        if (vpp) {
+                write_scoop_reg(SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN);
+        } else {
+                write_scoop_reg(SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
+        }
+}
+
+static struct flash_platform_data collie_flash_data = {
+        .map_name       = "cfi_probe",
+        .set_vpp        = collie_set_vpp,
+        .parts          = collie_partitions,
+        .nr_parts       = ARRAY_SIZE(collie_partitions),
+};
+
+static struct resource collie_flash_resources[] = {
+        {
+                .start  = SA1100_CS0_PHYS,
+                .end    = SA1100_CS0_PHYS + SZ_32M - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+static void __init collie_init(void)
+{
+        int ret = 0;
+
+        /* cpu initialize */
+        GAFR = ( GPIO_SSP_TXD | \
+                 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
+                 GPIO_32_768kHz );
+
+        GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
+                 GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
+                 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
+                 GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
+        GPLR = GPIO_GPIO18;
+
+        // PPC pin setting
+        PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
+                 PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
+                 PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
+
+        PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
+
+        GAFR |= GPIO_32_768kHz;
+        GPDR |= GPIO_32_768kHz;
+        TUCR  = TUCR_32_768kHz;
+
+        ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+        if (ret) {
+                printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
+        }
+
+        sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources,
+                              ARRAY_SIZE(collie_flash_resources));
+
+        sharpsl_save_param();
+}
+
+static struct map_desc collie_io_desc[] __initdata = {
+        /* virtual     physical    length      type */
+        {0xe8000000, 0x00000000, 0x02000000, MT_DEVICE},        /* 32M main flash (cs0) */
+        {0xea000000, 0x08000000, 0x02000000, MT_DEVICE},        /* 32M boot flash (cs1) */
+};
+
+static void __init collie_map_io(void)
+{
+        sa1100_map_io();
+        iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
+}
+
+MACHINE_START(COLLIE, "Sharp-Collie")
+        BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
+        MAPIO(collie_map_io)
+        INITIRQ(sa1100_init_irq)
+        .timer          = &sa1100_timer,
+        .init_machine   = collie_init,
+MACHINE_END