ARM: S5PV210: add Aquila board

Add basic support for Samsung Aquila board. This board is based
on S5PC110 SoC.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 100 insertions, 0 deletions

diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
new file mode 100644
index 000000000000..6a1db39d931e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -0,0 +1,100 @@
+/* linux/arch/arm/mach-s5pv210/mach-aquila.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT    (S3C2410_UCON_TXILEVEL |        \
+                                 S3C2410_UCON_RXILEVEL |        \
+                                 S3C2410_UCON_TXIRQMODE |       \
+                                 S3C2410_UCON_RXIRQMODE |       \
+                                 S3C2410_UCON_RXFIFO_TOI |      \
+                                 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT   S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT   (S3C2410_UFCON_FIFOMODE |       \
+                                 S5PV210_UFCON_TXTRIG4 |        \
+                                 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+        [0] = {
+                .hwport         = 0,
+                .flags          = 0,
+                .ucon           = S5PV210_UCON_DEFAULT,
+                .ulcon          = S5PV210_ULCON_DEFAULT,
+                .ufcon          = S5PV210_UFCON_DEFAULT,
+        },
+        [1] = {
+                .hwport         = 1,
+                .flags          = 0,
+                .ucon           = S5PV210_UCON_DEFAULT,
+                .ulcon          = S5PV210_ULCON_DEFAULT,
+                .ufcon          = S5PV210_UFCON_DEFAULT,
+        },
+        [2] = {
+                .hwport         = 2,
+                .flags          = 0,
+                .ucon           = S5PV210_UCON_DEFAULT,
+                .ulcon          = S5PV210_ULCON_DEFAULT,
+                .ufcon          = S5PV210_UFCON_DEFAULT,
+        },
+        [3] = {
+                .hwport         = 3,
+                .flags          = 0,
+                .ucon           = S5PV210_UCON_DEFAULT,
+                .ulcon          = S5PV210_ULCON_DEFAULT,
+                .ufcon          = S5PV210_UFCON_DEFAULT,
+        },
+};
+
+static struct platform_device *aquila_devices[] __initdata = {
+};
+
+static void __init aquila_map_io(void)
+{
+        s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+        s3c24xx_init_clocks(24000000);
+        s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init aquila_machine_init(void)
+{
+        platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
+}
+
+MACHINE_START(AQUILA, "Aquila")
+        /* Maintainers:
+           Marek Szyprowski <m.szyprowski@samsung.com>
+           Kyungmin Park <kyungmin.park@samsung.com> */
+        .phys_io        = S3C_PA_UART & 0xfff00000,
+        .io_pg_offst    = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+        .boot_params    = S5P_PA_SDRAM + 0x100,
+        .init_irq       = s5pv210_init_irq,
+        .map_io         = aquila_map_io,
+        .init_machine   = aquila_machine_init,
+        .timer          = &s3c24xx_timer,
+MACHINE_END