ARM: S3C24XX: Add HSSPI setup callback for s3c64xx-spi driver

This lets the s3c64xx-spi driver know the specifics of the controller-
variant and also setups the gpios and the misccr bit.

This setup is valid for all S3C24XX SoCs containing a HSSPI controller
(i.e. S3C2416/2450 and S3C2443)

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

1 files changed, 39 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c
new file mode 100644
index 000000000000..5712c85f39b1
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/setup-spi.c
@@ -0,0 +1,39 @@
+/*
+ * HS-SPI device setup for S3C2443/S3C2416
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *              http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+        .fifo_lvl_mask  = 0x7f,
+        .rx_lvl_offset  = 13,
+        .tx_st_done     = 21,
+        .high_speed     = 1,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+{
+        /* enable hsspi bit in misccr */
+        s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+        s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+                              S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+        return 0;
+}
+#endif