[ARM] 4325/1: S3C24XX: remove s3c24xx_board

Remove the use of struct s3c24xx_board as
this is just as easily done by using the
platform device registration functions to
make the initialisation sequence easier.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 6 insertions, 7 deletions

diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 6d551d88330b..5e61f2166c76 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -116,12 +116,6 @@ static struct platform_device *nexcoder_devices[] __initdata = {
         &nexcoder_device_nor,
 };
 
-static struct s3c24xx_board nexcoder_board __initdata = {
-        .devices       = nexcoder_devices,
-        .devices_count = ARRAY_SIZE(nexcoder_devices),
-};
-
-
 static void __init nexcoder_sensorboard_init(void)
 {
         // Initialize SCCB bus
@@ -142,10 +136,14 @@ static void __init nexcoder_map_io(void)
         s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
         s3c24xx_init_clocks(0);
         s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
-        s3c24xx_set_board(&nexcoder_board);
+
         nexcoder_sensorboard_init();
 }
 
+static void __init nexcoder_init(void)
+{
+        platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
+};
 
 MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
         /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
@@ -153,6 +151,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
         .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
         .boot_params    = S3C2410_SDRAM_PA + 0x100,
         .map_io         = nexcoder_map_io,
+        .init_machine   = nexcoder_init,
         .init_irq       = s3c24xx_init_irq,
         .timer          = &s3c24xx_timer,
 MACHINE_END