[ARM] S3C24XX: GPIO: Change to macros for GPIO numbering

Prepare to remove the large number of S3C2410_GPxn defines
by moving to S3C2410_GPx(n) in arch/arm.

The following perl was used to change the files:

    perl -pi~ -e 's/S3C2410_GP([A-Z])([0-9]+)([^_^0-9])/S3C2410_GP\1\(\2\)\3/g'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 4 insertions, 4 deletions

diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 753aaedae551..9a5e43419722 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -85,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
         switch (cmd)
         {
                 case S3C2410_UDC_P_ENABLE :
-                        s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+                        s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
                         break;
                 case S3C2410_UDC_P_DISABLE :
-                        s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+                        s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
                         break;
                 case S3C2410_UDC_P_RESET :
                         break;
@@ -135,8 +135,8 @@ static void __init smdk2413_machine_init(void)
 {       /* Turn off suspend on both USB ports, and switch the
          * selectable USB port to USB device mode. */
 
-        s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-        s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+        s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+        s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
 
         s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
                               S3C2410_MISCCR_USBSUSPND0 |