[ARM] S3C24XX: GPIO: Remove pin specific input and output defines

The use of S3C2410_GP[A-Z]x_INP and S3C2410_GP[A-Z]x_OUTP are
very rare and are taking up large amounts of space in the
regs-gpio.h header.

The GPIO layer has had generic input and out defines called
S3C2410_GPIO_INPUT and S3C2410_GPIO_OUTPUT for a while which work
for all S3C24XX GPIOs.

Do the following replacements:

   S3C2410_GP[A-Z][0-9]*_\OUTP => S3C2410_GPIO_OUTPUT
   S3C2410_GP[A-Z][0-9]*_\INP  => /S3C2410_GPIO_INPUT
   S3C2410_GPA[0-9]*_OUT       => S3C2410_GPIO_OUTPUT

to remove any usages of these and prepare the header for
the removal of these.

The following command was used to acheive this:

find . -type f -writable ! -name regs-gpio.h ! -name "*~" | xargs sed -i~ -e 's/S3C2410_GP[A-Z][0-9]*_\OUTP/S3C2410_GPIO_OUTPUT/g' -e 's/S3C2410_GP[A-Z][0-9]*_\INP/S3C2410_GPIO_INPUT/g' -e 's/S3C2410_GPA[0-9]*_OUT/S3C2410_GPIO_OUTPUT/g'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 1 insertions, 1 deletions

diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5a6bc56f186b..1f332b38f15b 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -89,7 +89,7 @@ static int __init h1940bt_probe(struct platform_device *pdev)
         /* Configures BT serial port GPIOs */
         s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
         s3c2410_gpio_pullup(S3C2410_GPH0, 1);
-        s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
+        s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPIO_OUTPUT);
         s3c2410_gpio_pullup(S3C2410_GPH1, 1);
         s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
         s3c2410_gpio_pullup(S3C2410_GPH2, 1);