Merge branch 'for-rmk-realview' of git://linux-arm.org/linux-2.6 into devel

9 files changed, 208 insertions, 13 deletions

diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 8d699fd324d0..268d7701fa9b 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -49,16 +49,14 @@
 #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
 #define REALVIEW_EB11MP_SCU_BASE        0x10100000      /* SCU registers */
 #define REALVIEW_EB11MP_GIC_CPU_BASE    0x10100100      /* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE        0x10100700
-#define REALVIEW_EB11MP_TWD_SIZE        0x00000100
+#define REALVIEW_EB11MP_TWD_BASE        0x10100600
 #define REALVIEW_EB11MP_GIC_DIST_BASE   0x10101000      /* Generic interrupt controller distributor */
 #define REALVIEW_EB11MP_L220_BASE       0x10102000      /* L220 registers */
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1   0xD8            /* Register offset for MPCore sysctl */
 #else
 #define REALVIEW_EB11MP_SCU_BASE        0x1F000000      /* SCU registers */
 #define REALVIEW_EB11MP_GIC_CPU_BASE    0x1F000100      /* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE        0x1F000700
-#define REALVIEW_EB11MP_TWD_SIZE        0x00000100
+#define REALVIEW_EB11MP_TWD_BASE        0x1F000600
 #define REALVIEW_EB11MP_GIC_DIST_BASE   0x1F001000      /* Generic interrupt controller distributor */
 #define REALVIEW_EB11MP_L220_BASE       0x1F002000      /* L220 registers */
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1   0x74            /* Register offset for MPCore sysctl */
@@ -163,7 +161,7 @@
 #define NR_IRQS                 NR_IRQS_EB
 #endif
 
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
         && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
 #undef MAX_GIC_NR
 #define MAX_GIC_NR              NR_GIC_EB11MP
@@ -177,6 +175,7 @@
 #define REALVIEW_EB_PROC_ARM9           0x02000000
 #define REALVIEW_EB_PROC_ARM11          0x04000000
 #define REALVIEW_EB_PROC_ARM11MP        0x06000000
+#define REALVIEW_EB_PROC_A9MP           0x0C000000
 
 #define check_eb_proc(proc_type)                                                \
         ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)     \
@@ -188,4 +187,13 @@
 #define core_tile_eb11mp()      0
 #endif
 
+#ifdef CONFIG_REALVIEW_EB_A9MP
+#define core_tile_a9mp()        check_eb_proc(REALVIEW_EB_PROC_A9MP)
+#else
+#define core_tile_a9mp()        0
+#endif
+
+#define machine_is_realview_eb_mp() \
+        (machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp()))
+
 #endif  /* __ASM_ARCH_BOARD_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index ecd80e58631e..53ea0e7a1267 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -77,8 +77,7 @@
  */
 #define REALVIEW_TC11MP_SCU_BASE                0x1F000000      /* IRQ, Test chip */
 #define REALVIEW_TC11MP_GIC_CPU_BASE            0x1F000100      /* Test chip interrupt controller CPU interface */
-#define REALVIEW_TC11MP_TWD_BASE                0x1F000700
-#define REALVIEW_TC11MP_TWD_SIZE                0x00000100
+#define REALVIEW_TC11MP_TWD_BASE                0x1F000600
 #define REALVIEW_TC11MP_GIC_DIST_BASE           0x1F001000      /* Test chip interrupt controller distributor */
 #define REALVIEW_TC11MP_L220_BASE               0x1F002000      /* L220 registers */
 
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
new file mode 100644
index 000000000000..c8bed8f58bab
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -0,0 +1,152 @@
+/*
+ * include/asm-arm/arch-realview/board-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PBA8_H
+#define __ASM_ARCH_BOARD_PBA8_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PBA8_UART0_BASE                0x10009000      /* UART 0 */
+#define REALVIEW_PBA8_UART1_BASE                0x1000A000      /* UART 1 */
+#define REALVIEW_PBA8_UART2_BASE                0x1000B000      /* UART 2 */
+#define REALVIEW_PBA8_UART3_BASE                0x1000C000      /* UART 3 */
+#define REALVIEW_PBA8_SSP_BASE                  0x1000D000      /* Synchronous Serial Port */
+#define REALVIEW_PBA8_WATCHDOG0_BASE            0x1000F000      /* Watchdog 0 */
+#define REALVIEW_PBA8_WATCHDOG_BASE             0x10010000      /* watchdog interface */
+#define REALVIEW_PBA8_TIMER0_1_BASE             0x10011000      /* Timer 0 and 1 */
+#define REALVIEW_PBA8_TIMER2_3_BASE             0x10012000      /* Timer 2 and 3 */
+#define REALVIEW_PBA8_GPIO0_BASE                0x10013000      /* GPIO port 0 */
+#define REALVIEW_PBA8_RTC_BASE                  0x10017000      /* Real Time Clock */
+#define REALVIEW_PBA8_TIMER4_5_BASE             0x10018000      /* Timer 4/5 */
+#define REALVIEW_PBA8_TIMER6_7_BASE             0x10019000      /* Timer 6/7 */
+#define REALVIEW_PBA8_SCTL_BASE                 0x1001A000      /* System Controller */
+#define REALVIEW_PBA8_CLCD_BASE                 0x10020000      /* CLCD */
+#define REALVIEW_PBA8_ONB_SRAM_BASE             0x10060000      /* On-board SRAM */
+#define REALVIEW_PBA8_DMC_BASE                  0x100E0000      /* DMC configuration */
+#define REALVIEW_PBA8_SMC_BASE                  0x100E1000      /* SMC configuration */
+#define REALVIEW_PBA8_CAN_BASE                  0x100E2000      /* CAN bus */
+#define REALVIEW_PBA8_CF_BASE                   0x18000000      /* Compact flash */
+#define REALVIEW_PBA8_CF_MEM_BASE               0x18003000      /* SMC for Compact flash */
+#define REALVIEW_PBA8_GIC_CPU_BASE              0x1E000000      /* Generic interrupt controller CPU interface */
+#define REALVIEW_PBA8_FLASH0_BASE               0x40000000
+#define REALVIEW_PBA8_FLASH0_SIZE               SZ_64M
+#define REALVIEW_PBA8_FLASH1_BASE               0x44000000
+#define REALVIEW_PBA8_FLASH1_SIZE               SZ_64M
+#define REALVIEW_PBA8_ETH_BASE                  0x4E000000      /* Ethernet */
+#define REALVIEW_PBA8_USB_BASE                  0x4F000000      /* USB */
+#define REALVIEW_PBA8_GIC_DIST_BASE             0x1E001000      /* Generic interrupt controller distributor */
+#define REALVIEW_PBA8_LT_BASE                   0xC0000000      /* Logic Tile expansion */
+#define REALVIEW_PBA8_SDRAM6_BASE               0x70000000      /* SDRAM bank 6 256MB */
+#define REALVIEW_PBA8_SDRAM7_BASE               0x80000000      /* SDRAM bank 7 256MB */
+
+#define REALVIEW_PBA8_SYS_PLD_CTRL1             0x74
+
+/*
+ * PBA8 PCI regions
+ */
+#define REALVIEW_PBA8_PCI_BASE                  0x90040000      /* PCI-X Unit base */
+#define REALVIEW_PBA8_PCI_IO_BASE               0x90050000      /* IO Region on AHB */
+#define REALVIEW_PBA8_PCI_MEM_BASE              0xA0000000      /* MEM Region on AHB */
+
+#define REALVIEW_PBA8_PCI_BASE_SIZE             0x10000         /* 16 Kb */
+#define REALVIEW_PBA8_PCI_IO_SIZE               0x1000          /* 4 Kb */
+#define REALVIEW_PBA8_PCI_MEM_SIZE              0x20000000      /* 512 MB */
+
+/*
+ * Irqs
+ */
+#define IRQ_PBA8_GIC_START                      32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT     (IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE     (IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE    (IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG       (IRQ_PBA8_GIC_START + 0)        /* Watchdog timer */
+#define IRQ_PBA8_SOFT           (IRQ_PBA8_GIC_START + 1)        /* Software interrupt */
+#define IRQ_PBA8_COMMRx         (IRQ_PBA8_GIC_START + 2)        /* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx         (IRQ_PBA8_GIC_START + 3)        /* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1       (IRQ_PBA8_GIC_START + 4)        /* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3       (IRQ_PBA8_GIC_START + 5)        /* Timer 2/3 */
+#define IRQ_PBA8_GPIO0          (IRQ_PBA8_GIC_START + 6)        /* GPIO 0 */
+#define IRQ_PBA8_GPIO1          (IRQ_PBA8_GIC_START + 7)        /* GPIO 1 */
+#define IRQ_PBA8_GPIO2          (IRQ_PBA8_GIC_START + 8)        /* GPIO 2 */
+                                                                /* 9 reserved */
+#define IRQ_PBA8_RTC            (IRQ_PBA8_GIC_START + 10)       /* Real Time Clock */
+#define IRQ_PBA8_SSP            (IRQ_PBA8_GIC_START + 11)       /* Synchronous Serial Port */
+#define IRQ_PBA8_UART0          (IRQ_PBA8_GIC_START + 12)       /* UART 0 on development chip */
+#define IRQ_PBA8_UART1          (IRQ_PBA8_GIC_START + 13)       /* UART 1 on development chip */
+#define IRQ_PBA8_UART2          (IRQ_PBA8_GIC_START + 14)       /* UART 2 on development chip */
+#define IRQ_PBA8_UART3          (IRQ_PBA8_GIC_START + 15)       /* UART 3 on development chip */
+#define IRQ_PBA8_SCI            (IRQ_PBA8_GIC_START + 16)       /* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A         (IRQ_PBA8_GIC_START + 17)       /* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B         (IRQ_PBA8_GIC_START + 18)       /* Multimedia Card 0B */
+#define IRQ_PBA8_AACI           (IRQ_PBA8_GIC_START + 19)       /* Audio Codec */
+#define IRQ_PBA8_KMI0           (IRQ_PBA8_GIC_START + 20)       /* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1           (IRQ_PBA8_GIC_START + 21)       /* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD        (IRQ_PBA8_GIC_START + 22)       /* Character LCD */
+#define IRQ_PBA8_CLCD           (IRQ_PBA8_GIC_START + 23)       /* CLCD controller */
+#define IRQ_PBA8_DMAC           (IRQ_PBA8_GIC_START + 24)       /* DMA controller */
+#define IRQ_PBA8_PWRFAIL        (IRQ_PBA8_GIC_START + 25)       /* Power failure */
+#define IRQ_PBA8_PISMO          (IRQ_PBA8_GIC_START + 26)       /* PISMO interface */
+#define IRQ_PBA8_DoC            (IRQ_PBA8_GIC_START + 27)       /* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH            (IRQ_PBA8_GIC_START + 28)       /* Ethernet controller */
+#define IRQ_PBA8_USB            (IRQ_PBA8_GIC_START + 29)       /* USB controller */
+#define IRQ_PBA8_TSPEN          (IRQ_PBA8_GIC_START + 30)       /* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD         (IRQ_PBA8_GIC_START + 31)       /* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0           (IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1           (IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2           (IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3           (IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC            -1
+#define IRQ_PBA8_SCTL           -1
+
+#define NR_GIC_PBA8             1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8            (IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS                 NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR              NR_GIC_PBA8
+#endif
+
+#endif  /* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif  /* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 7196bcadff0c..92dbcb9e1792 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -8,15 +8,36 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
-*/
+ */
+
+#if defined(CONFIG_MACH_REALVIEW_EB) || \
+    defined(CONFIG_MACH_REALVIEW_PB11MP) || \
+    defined(CONFIG_MACH_REALVIEW_PBA8)
+#ifndef DEBUG_LL_UART_OFFSET
+#define DEBUG_LL_UART_OFFSET    0x00009000
+#elif DEBUG_LL_UART_OFFSET != 0x00009000
+#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
+#endif
+#endif
+
+#ifdef CONFIG_MACH_REALVIEW_PB1176
+#ifndef DEBUG_LL_UART_OFFSET
+#define DEBUG_LL_UART_OFFSET    0x0010c000
+#elif DEBUG_LL_UART_OFFSET != 0x0010c000
+#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
+#endif
+#endif
+
+#ifndef DEBUG_LL_UART_OFFSET
+#error "Unknown RealView platform"
+#endif
 
                 .macro  addruart,rx
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
                 moveq   \rx,      #0x10000000
-                movne   \rx,      #0xf0000000   @ virtual base
-                orr     \rx, \rx, #0x00009000
+                movne   \rx,      #0xfb000000   @ virtual base
+                orr     \rx, \rx, #DEBUG_LL_UART_OFFSET
                 .endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
index 79a93b3dfca9..b42c14f89acb 100644
--- a/arch/arm/mach-realview/include/mach/hardware.h
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -25,7 +25,14 @@
 #include <asm/sizes.h>
 
 /* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)           (((x) & 0x0fffffff) + 0xf0000000)
+/*
+ * Statically mapped addresses:
+ *
+ * 10xx xxxx -> fbxx xxxx
+ * 1exx xxxx -> fdxx xxxx
+ * 1fxx xxxx -> fexx xxxx
+ */
+#define IO_ADDRESS(x)           (((x) & 0x03ffffff) + 0xfb000000)
 #define __io_address(n)         __io(IO_ADDRESS(n))
 
 #endif
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
index 02a918529db3..fe5cb987aa21 100644
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -25,6 +25,7 @@
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
 #include <mach/board-pb1176.h>
+#include <mach/board-pba8.h>
 
 #define IRQ_LOCALTIMER          29
 #define IRQ_LOCALWDOG           30
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 65a0742094f7..293c30025e7e 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -23,6 +23,10 @@
 /*
  * Physical DRAM offset.
  */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+#define PHYS_OFFSET             UL(0x70000000)
+#else
 #define PHYS_OFFSET             UL(0x00000000)
+#endif
 
 #endif
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
index 79f50f218e77..415d634d52ab 100644
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -23,6 +23,7 @@
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
 #include <mach/board-pb1176.h>
+#include <mach/board-pba8.h>
 
 #define AMBA_UART_DR(base)      (*(volatile unsigned char *)((base) + 0x00))
 #define AMBA_UART_LCRH(base)    (*(volatile unsigned char *)((base) + 0x2c))
@@ -40,6 +41,8 @@ static inline unsigned long get_uart_base(void)
                 return REALVIEW_PB11MP_UART0_BASE;
         else if (machine_is_realview_pb1176())
                 return REALVIEW_PB1176_UART0_BASE;
+        else if (machine_is_realview_pba8())
+                return REALVIEW_PBA8_UART0_BASE;
         else
                 return 0;
 }
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
index 48cbcc873db2..fe0de1b507ac 100644
--- a/arch/arm/mach-realview/include/mach/vmalloc.h
+++ b/arch/arm/mach-realview/include/mach/vmalloc.h
@@ -18,4 +18,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END             (PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END             0xf8000000