Merge http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm into for-rmk

137 files changed, 12786 insertions, 792 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 914bb33dab92..e8ee7ec9ff6d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,18 +16,24 @@ config CPU_PXA310
 config CPU_PXA320
         bool "PXA320 (codename Monahans-P)"
 
+config CPU_PXA930
+        bool "PXA930 (codename Tavor-P)"
+
 endmenu
 
 endif
 
-menu "Select target boards"
-
 config ARCH_GUMSTIX
         bool "Gumstix XScale boards"
         help
           Say Y here if you intend to run this kernel on a
           Gumstix Full Function Minature Computer.
 
+config MACH_GUMSTIX_F
+        bool "Basix, Connex, ws-200ax, ws-400ax systems"
+        depends on ARCH_GUMSTIX
+        select PXA25x
+
 config ARCH_LUBBOCK
         bool "Intel DBPXA250 Development Platform"
         select PXA25x
@@ -58,6 +64,57 @@ config PXA_SHARPSL
           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
           handheld computer.
 
+config MACH_POODLE
+        bool "Enable Sharp SL-5600 (Poodle) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select SHARP_LOCOMO
+        select PXA_SSP
+
+config MACH_CORGI
+        bool "Enable Sharp SL-C700 (Corgi) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+        bool "Enable Sharp SL-C750 (Shepherd) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+        bool "Enable Sharp SL-C760 (Husky) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select PXA_SHARP_C7xx
+
+config MACH_AKITA
+        bool "Enable Sharp SL-1000 (Akita) Support"
+        depends on PXA_SHARPSL
+        select PXA27x
+        select PXA_SHARP_Cxx00
+        select MACH_SPITZ
+        select I2C
+        select I2C_PXA
+
+config MACH_SPITZ
+        bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+        depends on PXA_SHARPSL
+        select PXA27x
+        select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+        bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+        depends on PXA_SHARPSL
+        select PXA27x
+        select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+        bool "Enable Sharp SL-6000x (Tosa) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+
 config ARCH_PXA_ESERIES
         bool "PXA based Toshiba e-series PDAs"
         select PXA25x
@@ -70,10 +127,19 @@ config MACH_E330
           Say Y here if you intend to run this kernel on a Toshiba
           e330 family PDA.
 
+config MACH_E350
+        bool "Toshiba e350"
+        default y
+        depends on ARCH_PXA_ESERIES
+        help
+          Say Y here if you intend to run this kernel on a Toshiba
+          e350 family PDA.
+
 config MACH_E740
         bool "Toshiba e740"
         default y
         depends on ARCH_PXA_ESERIES
+        select FB_W100
         help
           Say Y here if you intend to run this kernel on a Toshiba
           e740 family PDA.
@@ -82,6 +148,7 @@ config MACH_E750
         bool "Toshiba e750"
         default y
         depends on ARCH_PXA_ESERIES
+        select FB_W100
         help
           Say Y here if you intend to run this kernel on a Toshiba
           e750 family PDA.
@@ -98,6 +165,7 @@ config MACH_E800
         bool "Toshiba e800"
         default y
         depends on ARCH_PXA_ESERIES
+        select FB_W100
         help
           Say Y here if you intend to run this kernel on a Toshiba
           e800 family PDA.
@@ -106,6 +174,10 @@ config MACH_TRIZEPS4
         bool "Keith und Koep Trizeps4 DIMM-Module"
         select PXA27x
 
+config MACH_TRIZEPS4_CONXS
+        bool "ConXS Eval Board"
+        depends on MACH_TRIZEPS4
+
 config MACH_EM_X270
         bool "CompuLab EM-x270 platform"
         select PXA27x
@@ -115,7 +187,7 @@ config MACH_COLIBRI
         select PXA27x
 
 config MACH_ZYLONITE
-        bool "PXA3xx Development Platform"
+        bool "PXA3xx Development Platform (aka Zylonite)"
         select PXA3xx
         select HAVE_PWM
 
@@ -124,6 +196,16 @@ config MACH_LITTLETON
         select PXA3xx
         select PXA_SSP
 
+config MACH_TAVOREVB
+        bool "PXA930 Evaluation Board (aka TavorEVB)"
+        select PXA3xx
+        select PXA930
+
+config MACH_SAAR
+        bool "PXA930 Handheld Platform (aka SAAR)"
+        select PXA3xx
+        select PXA930
+
 config MACH_ARMCORE
         bool "CompuLab CM-X270 modules"
         select PXA27x
@@ -131,7 +213,6 @@ config MACH_ARMCORE
 
 config MACH_MAGICIAN
         bool "Enable HTC Magician Support"
-        depends on ARCH_PXA
         select PXA27x
         select IWMMXT
 
@@ -139,18 +220,26 @@ config MACH_PCM027
         bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
         select PXA27x
         select IWMMXT
+        select PXA_SSP
 
-endmenu
+config ARCH_PXA_PALM
+        bool "PXA based Palm PDAs"
+        select HAVE_PWM
 
-choice
-        prompt "Used baseboard"
-        depends on MACH_PCM027
+config MACH_PALMTX
+        bool "Palm T|X"
+        default y
+        depends on ARCH_PXA_PALM
+        select PXA27x
+        select IWMMXT
+        help
+          Say Y here if you intend to run this kernel on a Palm T|X
+          handheld computer.
 
 config MACH_PCM990_BASEBOARD
         bool "PHYTEC PCM-990 development board"
         select HAVE_PWM
-
-endchoice
+        depends on MACH_PCM027
 
 choice
         prompt "display on pcm990"
@@ -167,88 +256,45 @@ config PCM990_DISPLAY_NONE
 
 endchoice
 
-if ARCH_GUMSTIX
-
-choice
-        prompt "Select target Gumstix board"
-
-config MACH_GUMSTIX_F
-        bool "Basix, Connex, ws-200ax, ws-400ax systems"
-        select PXA25x
-
-endchoice
-
-endif
 
+config PXA_EZX
+        bool "Motorola EZX Platform"
+        select PXA27x
+        select IWMMXT
+        select HAVE_PWM
 
-if MACH_TRIZEPS4
+config MACH_EZX_A780
+        bool "Motorola EZX A780"
+        default y
+        depends on PXA_EZX
 
-choice
-        prompt "Select base board for Trizeps 4 module"
+config MACH_EZX_E680
+        bool "Motorola EZX E680"
+        default y
+        depends on PXA_EZX
 
-config MACH_TRIZEPS4_CONXS
-        bool "ConXS Eval Board"
+config MACH_EZX_A1200
+        bool "Motorola EZX A1200"
+        default y
+        depends on PXA_EZX
 
-config MACH_TRIZEPS4_ANY
-        bool "another Board"
+config MACH_EZX_A910
+        bool "Motorola EZX A910"
+        default y
+        depends on PXA_EZX
 
-endchoice
+config MACH_EZX_E6
+        bool "Motorola EZX E6"
+        default y
+        depends on PXA_EZX
 
-endif
+config MACH_EZX_E2
+        bool "Motorola EZX E2"
+        default y
+        depends on PXA_EZX
 
 endmenu
 
-config MACH_POODLE
-        bool "Enable Sharp SL-5600 (Poodle) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-        select SHARP_LOCOMO
-        select PXA_SSP
-
-config MACH_CORGI
-        bool "Enable Sharp SL-C700 (Corgi) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-        select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-        bool "Enable Sharp SL-C750 (Shepherd) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-        select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-        bool "Enable Sharp SL-C760 (Husky) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-        select PXA_SHARP_C7xx
-
-config MACH_AKITA
-        bool "Enable Sharp SL-1000 (Akita) Support"
-        depends on PXA_SHARPSL
-        select PXA27x
-        select PXA_SHARP_Cxx00
-        select MACH_SPITZ
-        select I2C
-        select I2C_PXA
-
-config MACH_SPITZ
-        bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-        depends on PXA_SHARPSL
-        select PXA27x
-        select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-        bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-        depends on PXA_SHARPSL
-        select PXA27x
-        select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-        bool "Enable Sharp SL-6000x (Tosa) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-
 config PXA25x
         bool
         help
@@ -288,4 +334,13 @@ config PXA_PWM
         default BACKLIGHT_PWM
         help
           Enable support for PXA2xx/PXA3xx PWM controllers
+
+config TOSA_BT
+        tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+        depends on MACH_TOSA
+        select RFKILL
+        help
+          This is a simple driver that is able to control
+          the state of built in bluetooth chip on tosa.
+
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c4dfbe87fc4e..99ecbe7f8506 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -4,7 +4,7 @@
 
 # Common support (must be linked before board specific support)
 obj-y                           += clock.o devices.o generic.o irq.o dma.o \
-                                   time.o gpio.o
+                                   time.o gpio.o reset.o
 obj-$(CONFIG_PM)                += pm.o sleep.o standby.o
 obj-$(CONFIG_CPU_FREQ)          += cpu-pxa.o
 
@@ -18,6 +18,7 @@ obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)            += mfp-pxa3xx.o pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)        += pxa300.o
 obj-$(CONFIG_CPU_PXA320)        += pxa320.o
+obj-$(CONFIG_CPU_PXA930)        += pxa930.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)      += gumstix.o
@@ -36,7 +37,12 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)         += tosa.o
 obj-$(CONFIG_MACH_EM_X270)      += em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)     += magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)  += eseries.o
+obj-$(CONFIG_ARCH_PXA_ESERIES)  += eseries.o eseries_udc.o
+obj-$(CONFIG_MACH_E740)         += e740_lcd.o
+obj-$(CONFIG_MACH_E750)         += e750_lcd.o
+obj-$(CONFIG_MACH_E400)         += e400_lcd.o
+obj-$(CONFIG_MACH_E800)         += e800_lcd.o
+obj-$(CONFIG_MACH_PALMTX)       += palmtx.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y                         += zylonite.o
@@ -44,8 +50,11 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-$(CONFIG_CPU_PXA320)      += zylonite_pxa320.o
 endif
 obj-$(CONFIG_MACH_LITTLETON)    += littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)     += tavorevb.o
+obj-$(CONFIG_MACH_SAAR)         += saar.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -59,3 +68,5 @@ obj-$(CONFIG_LEDS)		+= $(led-y)
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif
+
+obj-$(CONFIG_TOSA_BT)           += tosa-bt.o
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
index 254892ac30cd..5c67b188a3ba 100644
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ b/arch/arm/mach-pxa/akita-ioexp.c
@@ -19,7 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
-#include <asm/arch/akita.h>
+#include <mach/akita.h>
 
 /* MAX7310 Regiser Map */
 #define MAX7310_INPUT    0x00
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index b4d04955dcb0..c01eea88f787 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,9 +12,9 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/hardware.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -101,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
 EXPORT_SYMBOL(clk_get_rate);
 
 
-static void clk_gpio27_enable(struct clk *clk)
-{
-        pxa_gpio_mode(GPIO11_3_6MHz_MD);
-}
-
-static void clk_gpio27_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_gpio27_ops = {
-        .enable         = clk_gpio27_enable,
-        .disable        = clk_gpio27_disable,
-};
-
-
 void clk_cken_enable(struct clk *clk)
 {
         CKEN |= 1 << clk->cken;
@@ -131,14 +116,6 @@ const struct clkops clk_cken_ops = {
         .disable        = clk_cken_disable,
 };
 
-static struct clk common_clks[] = {
-        {
-                .name           = "GPIO27_CLK",
-                .ops            = &clk_gpio27_ops,
-                .rate           = 3686400,
-        },
-};
-
 void clks_register(struct clk *clks, size_t num)
 {
         int i;
@@ -148,10 +125,3 @@ void clks_register(struct clk *clks, size_t num)
                 list_add(&clks[i].node, &clocks);
         mutex_unlock(&clocks_mutex);
 }
-
-static int __init clk_init(void)
-{
-        clks_register(common_clks, ARRAY_SIZE(common_clks));
-        return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 83cbfaba485d..1ec8f9178aaf 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -47,9 +47,42 @@ struct clk {
                 .other  = _other,                       \
         }
 
+#define INIT_CLK(_name, _ops, _rate, _delay, _dev)      \
+        {                                               \
+                .name   = _name,                        \
+                .dev    = _dev,                         \
+                .ops    = _ops,                         \
+                .rate   = _rate,                        \
+                .delay  = _delay,                       \
+        }
+
 extern const struct clkops clk_cken_ops;
 
 void clk_cken_enable(struct clk *clk);
 void clk_cken_disable(struct clk *clk);
 
+#ifdef CONFIG_PXA3xx
+#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)  \
+        {                                               \
+                .name   = _name,                        \
+                .dev    = _dev,                         \
+                .ops    = &clk_pxa3xx_cken_ops,         \
+                .rate   = _rate,                        \
+                .cken   = CKEN_##_cken,                 \
+                .delay  = _delay,                       \
+        }
+
+#define PXA3xx_CK(_name, _cken, _ops, _dev)             \
+        {                                               \
+                .name   = _name,                        \
+                .dev    = _dev,                         \
+                .ops    = _ops,                         \
+                .cken   = CKEN_##_cken,                 \
+        }
+
+extern const struct clkops clk_pxa3xx_cken_ops;
+extern void clk_pxa3xx_cken_enable(struct clk *);
+extern void clk_pxa3xx_cken_disable(struct clk *);
+#endif
+
 void clks_register(struct clk *clks, size_t num);
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 319c9ff3ab9a..2d5bcea1e520 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -5,7 +5,7 @@
  *
  * Bits taken from various places.
  *
- * Copyright (C) 2007 Compulab, Ltd.
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,16 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <asm/arch/cm-x270.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
 
-unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+unsigned long it8152_base_address;
+static int cmx270_it8152_irq_gpio;
 
 /*
  * Only first 64MB of memory can be accessed via PCI.
@@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
         unsigned int sz = SZ_64M >> PAGE_SHIFT;
 
         if (machine_is_armcore()) {
-                pr_info("Adjusting zones for CM-x270\n");
+                pr_info("Adjusting zones for CM-X270\n");
 
                 /*
                  * Only adjust if > 64M on current system
@@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
         /* clear our parent irq */
-        GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+        GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
 
         it8152_irq_demux(irq, desc);
 }
 
-void __cmx270_pci_init_irq(void)
+void __cmx270_pci_init_irq(int irq_gpio)
 {
         it8152_init_irq();
-        pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
-        set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
 
-        set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
-                                cmx270_it8152_irq_demux);
+        cmx270_it8152_irq_gpio = irq_gpio;
+
+        set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
+
+        set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
 }
 
 #ifdef CONFIG_PM
@@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
         /*
           Here comes the ugly part. The routing is baseboard specific,
-          but defining a platform for each possible base of CM-x270 is
-          unrealistic. Here we keep mapping for ATXBase and SB-x270.
+          but defining a platform for each possible base of CM-X270 is
+          unrealistic. Here we keep mapping for ATXBase and SB-X270.
         */
         /* ATXBASE PCI slot */
         if (slot == 7)
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
index ffe37b66f9a0..48f532f4cb51 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ b/arch/arm/mach-pxa/cm-x270-pci.h
@@ -1,13 +1,13 @@
-extern void __cmx270_pci_init_irq(void);
+extern void __cmx270_pci_init_irq(int irq_gpio);
 extern void __cmx270_pci_suspend(void);
 extern void __cmx270_pci_resume(void);
 
 #ifdef CONFIG_PCI
-#define cmx270_pci_init_irq __cmx270_pci_init_irq
-#define cmx270_pci_suspend __cmx270_pci_suspend
-#define cmx270_pci_resume __cmx270_pci_resume
+#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
+#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
+#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
 #else
-#define cmx270_pci_init_irq() do {} while (0)
-#define cmx270_pci_suspend() do {} while (0)
-#define cmx270_pci_resume() do {} while (0)
+#define cmx270_pci_init_irq(x) do {} while (0)
+#define cmx270_pci_suspend(x) do {} while (0)
+#define cmx270_pci_resume(x) do {} while (0)
 #endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 01b9964acec1..af003a269534 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-pxa/cm-x270.c
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -9,44 +9,156 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/types.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
 #include <linux/platform_device.h>
-#include <linux/irq.h>
 #include <linux/sysdev.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-#include <linux/serial_8250.h>
-
 #include <video/mbxfb.h>
+#include <linux/leds.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/cm-x270.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/bitfield.h>
 
 #include <asm/hardware/it8152.h>
 
 #include "generic.h"
 #include "cm-x270-pci.h"
 
+/* virtual addresses for statically mapped regions */
+#define CMX270_VIRT_BASE        (0xe8000000)
+#define CMX270_IT8152_VIRT      (CMX270_VIRT_BASE)
+
 #define RTC_PHYS_BASE           (PXA_CS1_PHYS + (5 << 22))
 #define DM9000_PHYS_BASE        (PXA_CS1_PHYS + (6 << 22))
 
-static struct resource cmx270_dm9k_resource[] = {
+/* GPIO IRQ usage */
+#define GPIO10_ETHIRQ           (10)
+#define GPIO22_IT8152_IRQ       (22)
+#define GPIO83_MMC_IRQ          (83)
+#define GPIO95_GFXIRQ           (95)
+
+#define CMX270_ETHIRQ           IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX270_IT8152_IRQ       IRQ_GPIO(GPIO22_IT8152_IRQ)
+#define CMX270_MMC_IRQ          IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_GFXIRQ           IRQ_GPIO(GPIO95_GFXIRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER       (105)
+
+static unsigned long cmx270_pin_config[] = {
+        /* AC'97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+        GPIO98_AC97_SYSCLK,
+        GPIO113_AC97_nRESET,
+
+        /* BTUART */
+        GPIO42_BTUART_RXD,
+        GPIO43_BTUART_TXD,
+        GPIO44_BTUART_CTS,
+        GPIO45_BTUART_RTS,
+
+        /* STUART */
+        GPIO46_STUART_RXD,
+        GPIO47_STUART_TXD,
+
+        /* MCI controller */
+        GPIO32_MMC_CLK,
+        GPIO112_MMC_CMD,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+
+        /* LCD */
+        GPIO58_LCD_LDD_0,
+        GPIO59_LCD_LDD_1,
+        GPIO60_LCD_LDD_2,
+        GPIO61_LCD_LDD_3,
+        GPIO62_LCD_LDD_4,
+        GPIO63_LCD_LDD_5,
+        GPIO64_LCD_LDD_6,
+        GPIO65_LCD_LDD_7,
+        GPIO66_LCD_LDD_8,
+        GPIO67_LCD_LDD_9,
+        GPIO68_LCD_LDD_10,
+        GPIO69_LCD_LDD_11,
+        GPIO70_LCD_LDD_12,
+        GPIO71_LCD_LDD_13,
+        GPIO72_LCD_LDD_14,
+        GPIO73_LCD_LDD_15,
+        GPIO74_LCD_FCLK,
+        GPIO75_LCD_LCLK,
+        GPIO76_LCD_PCLK,
+        GPIO77_LCD_BIAS,
+
+        /* I2C */
+        GPIO117_I2C_SCL,
+        GPIO118_I2C_SDA,
+
+        /* SSP1 */
+        GPIO23_SSP1_SCLK,
+        GPIO24_SSP1_SFRM,
+        GPIO25_SSP1_TXD,
+        GPIO26_SSP1_RXD,
+
+        /* SSP2 */
+        GPIO19_SSP2_SCLK,
+        GPIO14_SSP2_SFRM,
+        GPIO87_SSP2_TXD,
+        GPIO88_SSP2_RXD,
+
+        /* PC Card */
+        GPIO48_nPOE,
+        GPIO49_nPWE,
+        GPIO50_nPIOR,
+        GPIO51_nPIOW,
+        GPIO85_nPCE_1,
+        GPIO54_nPCE_2,
+        GPIO55_nPREG,
+        GPIO56_nPWAIT,
+        GPIO57_nIOIS16,
+
+        /* SDRAM and local bus */
+        GPIO15_nCS_1,
+        GPIO78_nCS_2,
+        GPIO79_nCS_3,
+        GPIO80_nCS_4,
+        GPIO33_nCS_5,
+        GPIO49_nPWE,
+        GPIO18_RDY,
+
+        /* GPIO */
+        GPIO0_GPIO      | WAKEUP_ON_EDGE_BOTH,
+        GPIO105_GPIO    | MFP_LPM_DRIVE_HIGH,   /* MMC/SD power */
+        GPIO53_GPIO,                            /* PC card reset */
+
+        /* NAND controls */
+        GPIO11_GPIO     | MFP_LPM_DRIVE_HIGH,   /* NAND CE# */
+        GPIO89_GPIO,                            /* NAND Ready/Busy */
+
+        /* interrupts */
+        GPIO10_GPIO,    /* DM9000 interrupt */
+        GPIO83_GPIO,    /* MMC card detect */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx270_dm9000_resource[] = {
         [0] = {
                 .start = DM9000_PHYS_BASE,
                 .end   = DM9000_PHYS_BASE + 4,
@@ -64,31 +176,45 @@ static struct resource cmx270_dm9k_resource[] = {
         }
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data cmx270_dm9k_platdata = {
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
         .flags          = DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device cmx270_device_dm9k = {
+static struct platform_device cmx270_dm9000_device = {
         .name           = "dm9000",
         .id             = 0,
-        .num_resources  = ARRAY_SIZE(cmx270_dm9k_resource),
-        .resource       = cmx270_dm9k_resource,
+        .num_resources  = ARRAY_SIZE(cmx270_dm9000_resource),
+        .resource       = cmx270_dm9000_resource,
         .dev            = {
-                .platform_data = &cmx270_dm9k_platdata,
+                .platform_data = &cmx270_dm9000_platdata,
         }
 };
 
-/* touchscreen controller */
+static void __init cmx270_init_dm9000(void)
+{
+        platform_device_register(&cmx270_dm9000_device);
+}
+#else
+static inline void cmx270_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
 static struct platform_device cmx270_ts_device = {
         .name           = "ucb1400_ts",
         .id             = -1,
 };
 
-/* RTC */
+static void __init cmx270_init_touchscreen(void)
+{
+        platform_device_register(&cmx270_ts_device);
+}
+#else
+static inline void cmx270_init_touchscreen(void) {}
+#endif
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource cmx270_v3020_resource[] = {
         [0] = {
                 .start = RTC_PHYS_BASE,
@@ -111,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
         }
 };
 
-/*
- * CM-X270 LEDs
- */
+static void __init cmx270_init_rtc(void)
+{
+        platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx270_init_rtc(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx270_leds[] = {
+        [0] = {
+                .name = "cm-x270:red",
+                .default_trigger = "nand-disk",
+                .gpio = 93,
+                .active_low = 1,
+        },
+        [1] = {
+                .name = "cm-x270:green",
+                .default_trigger = "heartbeat",
+                .gpio = 94,
+                .active_low = 1,
+        },
+};
+
+static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
+        .num_leds = ARRAY_SIZE(cmx270_leds),
+        .leds = cmx270_leds,
+};
+
 static struct platform_device cmx270_led_device = {
-        .name           = "cm-x270-led",
+        .name           = "leds-gpio",
         .id             = -1,
+        .dev            = {
+                .platform_data = &cmx270_gpio_led_pdata,
+        },
 };
 
+static void __init cmx270_init_leds(void)
+{
+        platform_device_register(&cmx270_led_device);
+}
+#else
+static inline void cmx270_init_leds(void) {}
+#endif
+
 /* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
 static u64 fb_dma_mask = ~(u64)0;
 
 static struct resource cmx270_2700G_resource[] = {
         /* frame buffer memory including ODFB and External SDRAM */
         [0] = {
-                .start = MARATHON_PHYS,
-                .end   = MARATHON_PHYS + 0x02000000,
+                .start = PXA_CS2_PHYS,
+                .end   = PXA_CS2_PHYS + 0x01ffffff,
                 .flags = IORESOURCE_MEM,
         },
         /* Marathon registers */
         [1] = {
-                .start = MARATHON_PHYS + 0x03fe0000,
-                .end   = MARATHON_PHYS + 0x03ffffff,
+                .start = PXA_CS2_PHYS + 0x03fe0000,
+                .end   = PXA_CS2_PHYS + 0x03ffffff,
                 .flags = IORESOURCE_MEM,
         },
 };
@@ -200,43 +365,15 @@ static struct platform_device cmx270_2700G = {
         .id             = -1,
 };
 
-static u64 ata_dma_mask = ~(u64)0;
-
-static struct platform_device cmx270_ata = {
-        .name = "pata_cm_x270",
-        .id = -1,
-        .dev            = {
-                .dma_mask       = &ata_dma_mask,
-                .coherent_dma_mask = 0xffffffff,
-        },
-};
-
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-        &cmx270_device_dm9k,
-        &cmx270_rtc_device,
-        &cmx270_2700G,
-        &cmx270_led_device,
-        &cmx270_ts_device,
-        &cmx270_ata,
-};
-
-/* Map PCI companion and IDE/General Purpose CS statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
-        [0] = { /* IDE/general purpose space */
-                .virtual        = CMX270_IDE104_VIRT,
-                .pfn            = __phys_to_pfn(CMX270_IDE104_PHYS),
-                .length         = SZ_64M - SZ_8M,
-                .type           = MT_DEVICE
-        },
-        [1] = { /* PCI bridge */
-                .virtual        = CMX270_IT8152_VIRT,
-                .pfn            = __phys_to_pfn(CMX270_IT8152_PHYS),
-                .length         = SZ_64M,
-                .type           = MT_DEVICE
-        },
-};
+static void __init cmx270_init_2700G(void)
+{
+        platform_device_register(&cmx270_2700G);
+}
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
 
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /*
   Display definitions
   keep these for backwards compatibility, although symbolic names (as
@@ -446,7 +583,16 @@ static int __init cmx270_set_display(char *str)
 */
 __setup("monitor=", cmx270_set_display);
 
+static void __init cmx270_init_display(void)
+{
+        set_pxa_fb_info(cmx270_display);
+}
+#else
+static inline void cmx270_init_display(void) {}
+#endif
+
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int cmx270_ohci_init(struct device *dev)
 {
         /* Set the Power Control Polarity Low */
@@ -461,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
         .init           = cmx270_ohci_init,
 };
 
+static void __init cmx270_init_ohci(void)
+{
+        pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
 
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int cmx270_mci_init(struct device *dev,
                            irq_handler_t cmx270_detect_int,
                            void *data)
 {
         int err;
 
-        /*
-         * setup GPIO for PXA27x MMC controller
-         */
-        pxa_gpio_mode(GPIO32_MMCCLK_MD);
-        pxa_gpio_mode(GPIO112_MMCCMD_MD);
-        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-        /* SB-X270 uses GPIO105 as SD power enable */
-        pxa_gpio_mode(105 | GPIO_OUT);
+        err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
+        if (err) {
+                dev_warn(dev, "power gpio unavailable\n");
+                return err;
+        }
 
-        /* card detect IRQ on GPIO 83 */
-        pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
+        gpio_direction_output(GPIO105_MMC_POWER, 0);
 
         err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
                           IRQF_DISABLED | IRQF_TRIGGER_FALLING,
                           "MMC card detect", data);
-        if (err)
-                printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
-                       " request MMC card detect IRQ\n");
+        if (err) {
+                gpio_free(GPIO105_MMC_POWER);
+                dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
+                        " request MMC card detect IRQ\n");
+        }
 
         return err;
 }
@@ -499,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
         struct pxamci_platform_data *p_d = dev->platform_data;
 
         if ((1 << vdd) & p_d->ocr_mask) {
-                printk(KERN_DEBUG "%s: on\n", __func__);
-                GPCR(105) = GPIO_bit(105);
+                dev_dbg(dev, "power on\n");
+                gpio_set_value(GPIO105_MMC_POWER, 0);
         } else {
-                GPSR(105) = GPIO_bit(105);
-                printk(KERN_DEBUG "%s: off\n", __func__);
+                gpio_set_value(GPIO105_MMC_POWER, 1);
+                dev_dbg(dev, "power off\n");
         }
 }
 
 static void cmx270_mci_exit(struct device *dev, void *data)
 {
         free_irq(CMX270_MMC_IRQ, data);
+        gpio_free(GPIO105_MMC_POWER);
 }
 
 static struct pxamci_platform_data cmx270_mci_platform_data = {
@@ -519,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
         .exit           = cmx270_mci_exit,
 };
 
+static void __init cmx270_init_mmc(void)
+{
+        pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
 #ifdef CONFIG_PM
 static unsigned long sleep_save_msc[10];
 
@@ -580,53 +737,63 @@ static int __init cmx270_pm_init(void)
 static int __init cmx270_pm_init(void) { return 0; }
 #endif
 
-static void __init cmx270_init(void)
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx270_init_ac97(void)
 {
-        cmx270_pm_init();
-
-        set_pxa_fb_info(cmx270_display);
-
-        /* register CM-X270 platform devices */
-        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
         pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx270_init_ac97(void) {}
+#endif
 
-        /* set MCI and OHCI platform parameters */
-        pxa_set_mci_info(&cmx270_mci_platform_data);
-        pxa_set_ohci_info(&cmx270_ohci_platform_data);
-
-        /* This enables the STUART */
-        pxa_gpio_mode(GPIO46_STRXD_MD);
-        pxa_gpio_mode(GPIO47_STTXD_MD);
+static void __init cmx270_init(void)
+{
+        cmx270_pm_init();
 
-        /* This enables the BTUART  */
-        pxa_gpio_mode(GPIO42_BTRXD_MD);
-        pxa_gpio_mode(GPIO43_BTTXD_MD);
-        pxa_gpio_mode(GPIO44_BTCTS_MD);
-        pxa_gpio_mode(GPIO45_BTRTS_MD);
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+
+        cmx270_init_dm9000();
+        cmx270_init_rtc();
+        cmx270_init_display();
+        cmx270_init_mmc();
+        cmx270_init_ohci();
+        cmx270_init_ac97();
+        cmx270_init_touchscreen();
+        cmx270_init_leds();
+        cmx270_init_2700G();
 }
 
 static void __init cmx270_init_irq(void)
 {
         pxa27x_init_irq();
 
+        cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
+}
 
-        cmx270_pci_init_irq();
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx270_io_desc[] __initdata = {
+        [0] = { /* PCI bridge */
+                .virtual        = CMX270_IT8152_VIRT,
+                .pfn            = __phys_to_pfn(PXA_CS4_PHYS),
+                .length         = SZ_64M,
+                .type           = MT_DEVICE
+        },
+};
 
-        /* Setup interrupt for dm9000 */
-        pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
-        set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
+static void __init cmx270_map_io(void)
+{
+        pxa_map_io();
+        iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 
-        /* Setup interrupt for 2700G */
-        pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
-        set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
+        it8152_base_address = CMX270_IT8152_VIRT;
 }
-
+#else
 static void __init cmx270_map_io(void)
 {
         pxa_map_io();
-        iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 }
-
+#endif
 
 MACHINE_START(ARMCORE, "Compulab CM-x270")
         .boot_params    = 0xa0000100,
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 574839d7c132..abce13c846c5 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -21,16 +21,16 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/colibri.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/colibri.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b37671b71886..123a950db466 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -35,14 +35,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/corgi.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -465,6 +465,7 @@ static void corgi_irda_transceiver_mode(struct device *dev, int mode)
                 GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
         else
                 GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 9328df37afd1..311baf149b07 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -20,12 +20,12 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/corgi.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
+#include <mach/akita.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index e91c0f26c412..35bbfccd2df3 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -20,14 +20,14 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/corgi.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index eccc45d21f75..8e2f2215c4ba 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -16,13 +16,13 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/regs-ssp.h>
 #include "sharpsl.h"
 
 static DEFINE_SPINLOCK(corgi_ssp_lock);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
index fb9ba1ab2826..6f5569bac131 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -37,9 +37,9 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #ifdef DEBUG
 static unsigned int freq_debug;
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index a6f2390ce662..35736fc08634 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,17 +4,19 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/camera.h>
-#include <asm/arch/audio.h>
+#include <mach/gpio.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/camera.h>
+#include <mach/audio.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -830,4 +832,63 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
         pxa_register_device(&pxa3xx_device_mci3, info);
 }
 
+static struct resource pxa3xx_resources_nand[] = {
+        [0] = {
+                .start  = 0x43100000,
+                .end    = 0x43100053,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_NAND,
+                .end    = IRQ_NAND,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                /* DRCMR for Data DMA */
+                .start  = 97,
+                .end    = 97,
+                .flags  = IORESOURCE_DMA,
+        },
+        [3] = {
+                /* DRCMR for Command DMA */
+                .start  = 99,
+                .end    = 99,
+                .flags  = IORESOURCE_DMA,
+        },
+};
+
+static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_nand = {
+        .name           = "pxa3xx-nand",
+        .id             = -1,
+        .dev            = {
+                .dma_mask = &pxa3xx_nand_dma_mask,
+                .coherent_dma_mask = DMA_BIT_MASK(32),
+        },
+        .num_resources  = ARRAY_SIZE(pxa3xx_resources_nand),
+        .resource       = pxa3xx_resources_nand,
+};
+
+void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
+{
+        pxa_register_device(&pxa3xx_device_nand, info);
+}
 #endif /* CONFIG_PXA3xx */
+
+/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
+ * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+{
+        struct platform_device *pd;
+
+        pd = platform_device_alloc("pxa2xx-spi", id);
+        if (pd == NULL) {
+                printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+                       id);
+                return;
+        }
+
+        pd->dev.platform_data = info;
+        platform_device_add(pd);
+}
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index b852eb18daa5..887c738f5911 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -31,4 +31,6 @@ extern struct platform_device pxa25x_device_pwm1;
 extern struct platform_device pxa27x_device_pwm0;
 extern struct platform_device pxa27x_device_pwm1;
 
+extern struct platform_device pxa3xx_device_nand;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 3215316d7b06..c0be17e0ab82 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -20,10 +20,10 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 struct dma_channel {
         char *name;
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
new file mode 100644
index 000000000000..263884165f57
--- /dev/null
+++ b/arch/arm/mach-pxa/e400_lcd.c
@@ -0,0 +1,56 @@
+/*
+ * e400_lcd.c
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach-types.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxafb.h>
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+        .pixclock       = 140703,
+        .xres           = 240,
+        .yres           = 320,
+        .bpp            = 16,
+        .hsync_len      = 4,
+        .left_margin    = 28,
+        .right_margin   = 8,
+        .vsync_len      = 3,
+        .upper_margin   = 5,
+        .lower_margin   = 6,
+        .sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+        .modes          = &e400_pxafb_mode_info,
+        .num_modes      = 1,
+        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+        .lccr3          = 0,
+        .pxafb_backlight_power  = NULL,
+};
+
+static int __init e400_lcd_init(void)
+{
+        if (!machine_is_e400())
+                return -ENODEV;
+
+        set_pxa_fb_info(&e400_pxafb_mach_info);
+        return 0;
+}
+
+module_init(e400_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e400 lcd driver");
+MODULE_LICENSE("GPLv2");
+
diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c
new file mode 100644
index 000000000000..26bd599af178
--- /dev/null
+++ b/arch/arm/mach-pxa/e740_lcd.c
@@ -0,0 +1,123 @@
+/* e740_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+/*
+**potential** shutdown routine - to be investigated
+devmem2 0x0c010528 w 0xff3fff00
+devmem2 0x0c010190 w 0x7FFF8000
+devmem2 0x0c0101b0 w 0x00FF0000
+devmem2 0x0c01008c w 0x00000000
+devmem2 0x0c010080 w 0x000000bf
+devmem2 0x0c010098 w 0x00000015
+devmem2 0x0c010088 w 0x4b000204
+devmem2 0x0c010098 w 0x0000001d
+*/
+
+static struct w100_gen_regs e740_lcd_regs = {
+        .lcd_format =            0x00008023,
+        .lcdd_cntl1 =            0x0f000000,
+        .lcdd_cntl2 =            0x0003ffff,
+        .genlcd_cntl1 =          0x00ffff03,
+        .genlcd_cntl2 =          0x003c0f03,
+        .genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+        .xres            = 240,
+        .yres            = 320,
+        .left_margin     = 20,
+        .right_margin    = 28,
+        .upper_margin    = 9,
+        .lower_margin    = 8,
+        .crtc_ss         = 0x80140013,
+        .crtc_ls         = 0x81150110,
+        .crtc_gs         = 0x80050005,
+        .crtc_vpos_gs    = 0x000a0009,
+        .crtc_rev        = 0x0040010a,
+        .crtc_dclk       = 0xa906000a,
+        .crtc_gclk       = 0x80050108,
+        .crtc_goe        = 0x80050108,
+        .pll_freq        = 57,
+        .pixclk_divider         = 4,
+        .pixclk_divider_rotated = 4,
+        .pixclk_src     = CLK_SRC_XTAL,
+        .sysclk_divider  = 1,
+        .sysclk_src     = CLK_SRC_PLL,
+        .crtc_ps1_active =       0x41060010,
+};
+
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+        .init_data1 = 0x21002103,
+        .gpio_dir1  = 0xffffdeff,
+        .gpio_oe1   = 0x03c00643,
+        .init_data2 = 0x003f003f,
+        .gpio_dir2  = 0xffffffff,
+        .gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+        .modelist   = &e740_lcd_mode,
+        .num_modes  = 1,
+        .regs       = &e740_lcd_regs,
+        .gpio       = &e740_w100_gpio_info,
+        .xtal_freq = 14318000,
+        .xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+        [0] = {
+                .start          = 0x0c000000,
+                .end            = 0x0cffffff,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e740_fb_device = {
+        .name           = "w100fb",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &e740_fb_info,
+        },
+        .num_resources  = ARRAY_SIZE(e740_fb_resources),
+        .resource       = e740_fb_resources,
+};
+
+static int e740_lcd_init(void)
+{
+        int ret;
+
+        if (!machine_is_e740())
+                return -ENODEV;
+
+        return platform_device_register(&e740_fb_device);
+}
+
+module_init(e740_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e740 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750_lcd.c
new file mode 100644
index 000000000000..75edc3b5390f
--- /dev/null
+++ b/arch/arm/mach-pxa/e750_lcd.c
@@ -0,0 +1,109 @@
+/* e750_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e750_lcd_regs = {
+        .lcd_format =            0x00008003,
+        .lcdd_cntl1 =            0x00000000,
+        .lcdd_cntl2 =            0x0003ffff,
+        .genlcd_cntl1 =          0x00fff003,
+        .genlcd_cntl2 =          0x003c0f03,
+        .genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+        .xres            = 240,
+        .yres            = 320,
+        .left_margin     = 21,
+        .right_margin    = 22,
+        .upper_margin    = 5,
+        .lower_margin    = 4,
+        .crtc_ss         = 0x80150014,
+        .crtc_ls         = 0x8014000d,
+        .crtc_gs         = 0xc1000005,
+        .crtc_vpos_gs    = 0x00020147,
+        .crtc_rev        = 0x0040010a,
+        .crtc_dclk       = 0xa1700030,
+        .crtc_gclk       = 0x80cc0015,
+        .crtc_goe        = 0x80cc0015,
+        .crtc_ps1_active = 0x61060017,
+        .pll_freq        = 57,
+        .pixclk_divider         = 4,
+        .pixclk_divider_rotated = 4,
+        .pixclk_src     = CLK_SRC_XTAL,
+        .sysclk_divider  = 1,
+        .sysclk_src     = CLK_SRC_PLL,
+};
+
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+        .init_data1 = 0x01192f1b,
+        .gpio_dir1  = 0xd5ffdeff,
+        .gpio_oe1   = 0x000020bf,
+        .init_data2 = 0x010f010f,
+        .gpio_dir2  = 0xffffffff,
+        .gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+        .modelist   = &e750_lcd_mode,
+        .num_modes  = 1,
+        .regs       = &e750_lcd_regs,
+        .gpio       = &e750_w100_gpio_info,
+        .xtal_freq  = 14318000,
+        .xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+        [0] = {
+                .start          = 0x0c000000,
+                .end            = 0x0cffffff,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e750_fb_device = {
+        .name           = "w100fb",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &e750_fb_info,
+        },
+        .num_resources  = ARRAY_SIZE(e750_fb_resources),
+        .resource       = e750_fb_resources,
+};
+
+static int e750_lcd_init(void)
+{
+        if (!machine_is_e750())
+                return -ENODEV;
+
+        return platform_device_register(&e750_fb_device);
+}
+
+module_init(e750_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e750 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800_lcd.c
new file mode 100644
index 000000000000..e6aeab0ebc22
--- /dev/null
+++ b/arch/arm/mach-pxa/e800_lcd.c
@@ -0,0 +1,159 @@
+/* e800_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e800_lcd_regs = {
+        .lcd_format =            0x00008003,
+        .lcdd_cntl1 =            0x02a00000,
+        .lcdd_cntl2 =            0x0003ffff,
+        .genlcd_cntl1 =          0x000ff2a3,
+        .genlcd_cntl2 =          0x000002a3,
+        .genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+        [0] = {
+                .xres            = 480,
+                .yres            = 640,
+                .left_margin     = 52,
+                .right_margin    = 148,
+                .upper_margin    = 2,
+                .lower_margin    = 6,
+                .crtc_ss         = 0x80350034,
+                .crtc_ls         = 0x802b0026,
+                .crtc_gs         = 0x80160016,
+                .crtc_vpos_gs    = 0x00020003,
+                .crtc_rev        = 0x0040001d,
+                .crtc_dclk       = 0xe0000000,
+                .crtc_gclk       = 0x82a50049,
+                .crtc_goe        = 0x80ee001c,
+                .crtc_ps1_active = 0x00000000,
+                .pll_freq        = 128,
+                .pixclk_divider         = 4,
+                .pixclk_divider_rotated = 6,
+                .pixclk_src     = CLK_SRC_PLL,
+                .sysclk_divider  = 0,
+                .sysclk_src     = CLK_SRC_PLL,
+        },
+        [1] = {
+                .xres            = 240,
+                .yres            = 320,
+                .left_margin     = 15,
+                .right_margin    = 88,
+                .upper_margin    = 0,
+                .lower_margin    = 7,
+                .crtc_ss         = 0xd010000f,
+                .crtc_ls         = 0x80070003,
+                .crtc_gs         = 0x80000000,
+                .crtc_vpos_gs    = 0x01460147,
+                .crtc_rev        = 0x00400003,
+                .crtc_dclk       = 0xa1700030,
+                .crtc_gclk       = 0x814b0008,
+                .crtc_goe        = 0x80cc0015,
+                .crtc_ps1_active = 0x00000000,
+                .pll_freq        = 100,
+                .pixclk_divider         = 6, /* Wince uses 14 which gives a 7MHz pclk. */
+                .pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+                .pixclk_src     = CLK_SRC_PLL,
+                .sysclk_divider  = 0,
+                .sysclk_src     = CLK_SRC_PLL,
+        }
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+        .init_data1 = 0xc13fc019,
+        .gpio_dir1  = 0x3e40df7f,
+        .gpio_oe1   = 0x003c3000,
+        .init_data2 = 0x00000000,
+        .gpio_dir2  = 0x00000000,
+        .gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+        .ext_cntl        = 0x09640011,
+        .sdram_mode_reg  = 0x00600021,
+        .ext_timing_cntl = 0x10001545,
+        .io_cntl         = 0x7ddd7333,
+        .size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+        unsigned long tmp;
+
+        tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+        if (par->mode->xres == 480)
+                tmp |= 0x100;
+        else
+                tmp &= ~0x100;
+        w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+        .change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+        .modelist   = e800_lcd_mode,
+        .num_modes  = 2,
+        .regs       = &e800_lcd_regs,
+        .gpio       = &e800_w100_gpio_info,
+        .mem        = &e800_w100_mem_info,
+        .tg         = &e800_tg_info,
+        .xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+        [0] = {
+                .start          = 0x0c000000,
+                .end            = 0x0cffffff,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e800_fb_device = {
+        .name           = "w100fb",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &e800_fb_info,
+        },
+        .num_resources  = ARRAY_SIZE(e800_fb_resources),
+        .resource       = e800_fb_resources,
+};
+
+static int e800_lcd_init(void)
+{
+        if (!machine_is_e800())
+                return -ENODEV;
+
+        return platform_device_register(&e800_fb_device);
+}
+
+module_init(e800_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e800 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 1bf680749928..7a0a681a5847 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1,7 +1,7 @@
 /*
- * Support for CompuLab EM-x270 platform
+ * Support for CompuLab EM-X270 platform
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,31 +14,159 @@
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa27x-udc.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 
 /* GPIO IRQ usage */
-#define EM_X270_MMC_PD          (105)
-#define EM_X270_ETHIRQ          IRQ_GPIO(41)
-#define EM_X270_MMC_IRQ         IRQ_GPIO(13)
+#define GPIO41_ETHIRQ           (41)
+#define GPIO13_MMC_CD           (13)
+#define EM_X270_ETHIRQ          IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_MMC_CD          IRQ_GPIO(GPIO13_MMC_CD)
+
+/* NAND control GPIOs */
+#define GPIO11_NAND_CS  (11)
+#define GPIO56_NAND_RB  (56)
+
+static unsigned long em_x270_pin_config[] = {
+        /* AC'97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+        GPIO98_AC97_SYSCLK,
+        GPIO113_AC97_nRESET,
+
+        /* BTUART */
+        GPIO42_BTUART_RXD,
+        GPIO43_BTUART_TXD,
+        GPIO44_BTUART_CTS,
+        GPIO45_BTUART_RTS,
+
+        /* STUART */
+        GPIO46_STUART_RXD,
+        GPIO47_STUART_TXD,
+
+        /* MCI controller */
+        GPIO32_MMC_CLK,
+        GPIO112_MMC_CMD,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+
+        /* LCD */
+        GPIO58_LCD_LDD_0,
+        GPIO59_LCD_LDD_1,
+        GPIO60_LCD_LDD_2,
+        GPIO61_LCD_LDD_3,
+        GPIO62_LCD_LDD_4,
+        GPIO63_LCD_LDD_5,
+        GPIO64_LCD_LDD_6,
+        GPIO65_LCD_LDD_7,
+        GPIO66_LCD_LDD_8,
+        GPIO67_LCD_LDD_9,
+        GPIO68_LCD_LDD_10,
+        GPIO69_LCD_LDD_11,
+        GPIO70_LCD_LDD_12,
+        GPIO71_LCD_LDD_13,
+        GPIO72_LCD_LDD_14,
+        GPIO73_LCD_LDD_15,
+        GPIO74_LCD_FCLK,
+        GPIO75_LCD_LCLK,
+        GPIO76_LCD_PCLK,
+        GPIO77_LCD_BIAS,
+
+        /* QCI */
+        GPIO84_CIF_FV,
+        GPIO25_CIF_LV,
+        GPIO53_CIF_MCLK,
+        GPIO54_CIF_PCLK,
+        GPIO81_CIF_DD_0,
+        GPIO55_CIF_DD_1,
+        GPIO51_CIF_DD_2,
+        GPIO50_CIF_DD_3,
+        GPIO52_CIF_DD_4,
+        GPIO48_CIF_DD_5,
+        GPIO17_CIF_DD_6,
+        GPIO12_CIF_DD_7,
+
+        /* I2C */
+        GPIO117_I2C_SCL,
+        GPIO118_I2C_SDA,
+
+        /* Keypad */
+        GPIO100_KP_MKIN_0       | WAKEUP_ON_LEVEL_HIGH,
+        GPIO101_KP_MKIN_1       | WAKEUP_ON_LEVEL_HIGH,
+        GPIO102_KP_MKIN_2       | WAKEUP_ON_LEVEL_HIGH,
+        GPIO34_KP_MKIN_3        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO39_KP_MKIN_4        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO99_KP_MKIN_5        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO91_KP_MKIN_6        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO36_KP_MKIN_7        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO103_KP_MKOUT_0,
+        GPIO104_KP_MKOUT_1,
+        GPIO105_KP_MKOUT_2,
+        GPIO106_KP_MKOUT_3,
+        GPIO107_KP_MKOUT_4,
+        GPIO108_KP_MKOUT_5,
+        GPIO96_KP_MKOUT_6,
+        GPIO22_KP_MKOUT_7,
+
+        /* SSP1 */
+        GPIO26_SSP1_RXD,
+        GPIO23_SSP1_SCLK,
+        GPIO24_SSP1_SFRM,
+        GPIO57_SSP1_TXD,
+
+        /* SSP2 */
+        GPIO19_SSP2_SCLK,
+        GPIO14_SSP2_SFRM,
+        GPIO89_SSP2_TXD,
+        GPIO88_SSP2_RXD,
+
+        /* SDRAM and local bus */
+        GPIO15_nCS_1,
+        GPIO78_nCS_2,
+        GPIO79_nCS_3,
+        GPIO80_nCS_4,
+        GPIO49_nPWE,
+        GPIO18_RDY,
+
+        /* GPIO */
+        GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+        /* power controls */
+        GPIO20_GPIO     | MFP_LPM_DRIVE_LOW,    /* GPRS_PWEN */
+        GPIO115_GPIO    | MFP_LPM_DRIVE_LOW,    /* WLAN_PWEN */
+
+        /* NAND controls */
+        GPIO11_GPIO     | MFP_LPM_DRIVE_HIGH,   /* NAND CE# */
+        GPIO56_GPIO,                            /* NAND Ready/Busy */
+
+        /* interrupts */
+        GPIO13_GPIO,    /* MMC card detect */
+        GPIO41_GPIO,    /* DM9000 interrupt */
+};
 
-static struct resource em_x270_dm9k_resource[] = {
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
         [0] = {
                 .start = PXA_CS2_PHYS,
                 .end   = PXA_CS2_PHYS + 3,
@@ -56,32 +184,30 @@ static struct resource em_x270_dm9k_resource[] = {
         }
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data em_x270_dm9k_platdata = {
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
         .flags          = DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device em_x270_dm9k = {
+static struct platform_device em_x270_dm9000 = {
         .name           = "dm9000",
         .id             = 0,
-        .num_resources  = ARRAY_SIZE(em_x270_dm9k_resource),
-        .resource       = em_x270_dm9k_resource,
+        .num_resources  = ARRAY_SIZE(em_x270_dm9000_resource),
+        .resource       = em_x270_dm9000_resource,
         .dev            = {
-                .platform_data = &em_x270_dm9k_platdata,
+                .platform_data = &em_x270_dm9000_platdata,
         }
 };
 
-/* WM9712 touchscreen controller. Hopefully the driver will make it to
- * the mainstream sometime */
-static struct platform_device em_x270_ts = {
-        .name           = "wm97xx-ts",
-        .id             = -1,
-};
+static void __init em_x270_init_dm9000(void)
+{
+        platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
 
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource em_x270_v3020_resource[] = {
         [0] = {
                 .start = PXA_CS4_PHYS,
@@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = {
         }
 };
 
-/* NAND flash */
-#define GPIO_NAND_CS    (11)
-#define GPIO_NAND_RB    (56)
+static void __init em_x270_init_rtc(void)
+{
+        platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
 
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static inline void nand_cs_on(void)
 {
-        GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+        gpio_set_value(GPIO11_NAND_CS, 0);
 }
 
 static void nand_cs_off(void)
 {
         dsb();
 
-        GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+        gpio_set_value(GPIO11_NAND_CS, 1);
 }
 
 /* hardware specific access to control-lines */
@@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
         dsb();
 
-        return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+        return gpio_get_value(GPIO56_NAND_RB);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = {
         }
 };
 
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-        &em_x270_dm9k,
-        &em_x270_ts,
-        &em_x270_rtc,
-        &em_x270_nand,
-};
+static void __init em_x270_init_nand(void)
+{
+        int err;
 
+        err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+        if (err) {
+                pr_warning("EM-X270: failed to request NAND CS gpio\n");
+                return;
+        }
+
+        gpio_direction_output(GPIO11_NAND_CS, 1);
+
+        err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+        if (err) {
+                pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+                gpio_free(GPIO11_NAND_CS);
+                return;
+        }
+
+        gpio_direction_input(GPIO56_NAND_RB);
+
+        platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
 
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
 {
         /* Set the Power Control Polarity Low */
@@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
         .init           = em_x270_ohci_init,
 };
 
+static void __init em_x270_init_ohci(void)
+{
+        pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
 
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int em_x270_mci_init(struct device *dev,
                             irq_handler_t em_x270_detect_int,
                             void *data)
 {
-        int err;
-
-        /* setup GPIO for PXA27x MMC controller */
-        pxa_gpio_mode(GPIO32_MMCCLK_MD);
-        pxa_gpio_mode(GPIO112_MMCCMD_MD);
-        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-        /* EM-X270 uses GPIO13 as SD power enable */
-        pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
-
-        err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
-                          IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-                          "MMC card detect", data);
+        int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
+                              IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+                              "MMC card detect", data);
         if (err) {
                 printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
                        __func__, err);
@@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-        free_irq(EM_X270_MMC_IRQ, data);
+        int irq = gpio_to_irq(GPIO13_MMC_CD);
+        free_irq(irq, data);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
@@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
         .exit           = em_x270_mci_exit,
 };
 
+static void __init em_x270_init_mmc(void)
+{
+        pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
 /* LCD 480x640 */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info em_x270_lcd_mode = {
         .pixclock       = 50000,
         .bpp            = 16,
@@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
 static struct pxafb_mach_info em_x270_lcd = {
         .modes          = &em_x270_lcd_mode,
         .num_modes      = 1,
-        .cmap_inverse   = 0,
-        .cmap_static    = 0,
-        .lccr0          = LCCR0_PAS,
-        .lccr3          = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+        .lcd_conn       = LCD_COLOR_TFT_16BPP,
 };
-
-static void __init em_x270_init(void)
+static void __init em_x270_init_lcd(void)
 {
-        /* setup LCD */
         set_pxa_fb_info(&em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
 
-        /* register EM-X270 platform devices */
-        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init em_x270_init_ac97(void)
+{
         pxa_set_ac97_info(NULL);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int em_x270_matrix_keys[] = {
+        KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+        KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+        KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
 
-        /* set MCI and OHCI platform parameters */
-        pxa_set_mci_info(&em_x270_mci_platform_data);
-        pxa_set_ohci_info(&em_x270_ohci_platform_data);
+struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+        /* code map for the matrix keys */
+        .matrix_key_rows        = 3,
+        .matrix_key_cols        = 3,
+        .matrix_key_map         = em_x270_matrix_keys,
+        .matrix_key_map_size    = ARRAY_SIZE(em_x270_matrix_keys),
+};
+
+static void __init em_x270_init_keypad(void)
+{
+        pxa_set_keypad_info(&em_x270_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
 
-        /* setup STUART GPIOs */
-        pxa_gpio_mode(GPIO46_STRXD_MD);
-        pxa_gpio_mode(GPIO47_STTXD_MD);
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+        [0] = {
+                .desc   = "sleep/wakeup",
+                .code   = KEY_SUSPEND,
+                .type   = EV_PWR,
+                .gpio   = 1,
+                .wakeup = 1,
+        },
+};
 
-        /* setup BTUART GPIOs */
-        pxa_gpio_mode(GPIO42_BTRXD_MD);
-        pxa_gpio_mode(GPIO43_BTTXD_MD);
-        pxa_gpio_mode(GPIO44_BTCTS_MD);
-        pxa_gpio_mode(GPIO45_BTRTS_MD);
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+        .buttons        = gpio_keys_button,
+        .nbuttons       = 1,
+};
 
-        /* Setup interrupt for dm9000 */
-        set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+static struct platform_device em_x270_gpio_keys = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &em_x270_gpio_keys_data,
+        },
+};
+
+static void __init em_x270_init_gpio_keys(void)
+{
+        platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
+
+static void __init em_x270_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+        em_x270_init_dm9000();
+        em_x270_init_rtc();
+        em_x270_init_nand();
+        em_x270_init_lcd();
+        em_x270_init_mmc();
+        em_x270_init_ohci();
+        em_x270_init_keypad();
+        em_x270_init_gpio_keys();
+        em_x270_init_ac97();
 }
 
-MACHINE_START(EM_X270, "Compulab EM-x270")
+MACHINE_START(EM_X270, "Compulab EM-X270")
         .boot_params    = 0xa0000100,
         .phys_io        = 0x40000000,
         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index ee0ae93c876a..03942450885b 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -14,10 +14,10 @@
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
-#include <generic.h>
+#include "generic.h"
 
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
@@ -47,6 +47,19 @@ MACHINE_START(E330, "Toshiba e330")
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_E350
+MACHINE_START(E350, "Toshiba e350")
+        /* Maintainer: Ian Molton (spyro@f2s.com) */
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa25x_init_irq,
+        .fixup          = eseries_fixup,
+        .timer = &pxa_timer,
+MACHINE_END
+#endif
+
 #ifdef CONFIG_MACH_E740
 MACHINE_START(E740, "Toshiba e740")
         /* Maintainer: Ian Molton (spyro@f2s.com) */
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
new file mode 100644
index 000000000000..d622c04c0d44
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries_udc.c
@@ -0,0 +1,57 @@
+/*
+ * UDC functions for the Toshiba e-series PDAs
+ *
+ * Copyright (c) Ian Molton 2003
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <mach/udc.h>
+#include <mach/eseries-gpio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/domain.h>
+
+/* local PXA generic code */
+#include "generic.h"
+
+static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+        .gpio_vbus   = GPIO_E7XX_USB_DISC,
+        .gpio_pullup = GPIO_E7XX_USB_PULLUP,
+        .gpio_pullup_inverted = 1
+};
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+        .gpio_vbus   = GPIO_E800_USB_DISC,
+        .gpio_pullup = GPIO_E800_USB_PULLUP,
+        .gpio_pullup_inverted = 1
+};
+
+static int __init eseries_udc_init(void)
+{
+        if (machine_is_e330() || machine_is_e350() ||
+            machine_is_e740() || machine_is_e750() ||
+            machine_is_e400())
+                pxa_set_udc_info(&e7xx_udc_mach_info);
+        else if (machine_is_e800())
+                pxa_set_udc_info(&e800_udc_mach_info);
+
+        return 0;
+}
+
+module_init(eseries_udc_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("eseries UDC support");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
new file mode 100644
index 000000000000..cc3d850cc0b6
--- /dev/null
+++ b/arch/arm/mach-pxa/ezx.c
@@ -0,0 +1,220 @@
+/*
+ *  ezx.c - Common code for the EZX platform.
+ *
+ *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ *                2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ *                2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/setup.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
+
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = 1023,
+        .dft_brightness = 1023,
+        .pwm_period_ns  = 78770,
+};
+
+static struct platform_device ezx_backlight_device = {
+        .name           = "pwm-backlight",
+        .dev            = {
+                .parent = &pxa27x_device_pwm0.dev,
+                .platform_data = &ezx_backlight_data,
+        },
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+        .pixclock               = 150000,
+        .xres                   = 240,
+        .yres                   = 320,
+        .bpp                    = 16,
+        .hsync_len              = 10,
+        .left_margin            = 20,
+        .right_margin           = 10,
+        .vsync_len              = 2,
+        .upper_margin           = 3,
+        .lower_margin           = 2,
+        .sync                   = 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 = {
+        .modes          = &mode_ezx_old,
+        .num_modes      = 1,
+        .lcd_conn       = LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+        .pixclock               = 192308,
+        .xres                   = 240,
+        .yres                   = 320,
+        .bpp                    = 32,
+        .depth                  = 18,
+        .hsync_len              = 10,
+        .left_margin            = 20,
+        .right_margin           = 10,
+        .vsync_len              = 2,
+        .upper_margin           = 3,
+        .lower_margin           = 2,
+        .sync                   = 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 = {
+        .modes          = &mode_72r89803y01,
+        .num_modes      = 1,
+        .lcd_conn       = LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *devices[] __initdata = {
+        &ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata = {
+        /* PWM backlight */
+        GPIO16_PWM0_OUT,
+
+        /* BTUART */
+        GPIO42_BTUART_RXD,
+        GPIO43_BTUART_TXD,
+        GPIO44_BTUART_CTS,
+        GPIO45_BTUART_RTS,
+
+        /* STUART */
+        GPIO46_STUART_RXD,
+        GPIO47_STUART_TXD,
+
+        /* For A780 support (connected with Neptune GSM chip) */
+        GPIO30_USB_P3_2,        /* ICL_TXENB */
+        GPIO31_USB_P3_6,        /* ICL_VPOUT */
+        GPIO90_USB_P3_5,        /* ICL_VPIN */
+        GPIO91_USB_P3_1,        /* ICL_XRXD */
+        GPIO56_USB_P3_4,        /* ICL_VMOUT */
+        GPIO113_USB_P3_3,       /* /ICL_VMIN */
+};
+
+static void __init ezx_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+        pxa_set_i2c_info(NULL);
+        if (machine_is_ezx_a780() || machine_is_ezx_e680())
+                set_pxa_fb_info(&ezx_fb_info_1);
+        else
+                set_pxa_fb_info(&ezx_fb_info_2);
+
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
+                char **cmdline, struct meminfo *mi)
+{
+        /* We have two ram chips. First one with 32MB at 0xA0000000 and a second
+         * 16MB one at 0xAC000000
+         */
+        mi->nr_banks = 2;
+        mi->bank[0].start = 0xa0000000;
+        mi->bank[0].node = 0;
+        mi->bank[0].size = (32*1024*1024);
+        mi->bank[1].start = 0xac000000;
+        mi->bank[1].node = 1;
+        mi->bank[1].size = (16*1024*1024);
+}
+
+#ifdef CONFIG_MACH_EZX_A780
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .fixup                  = ezx_fixup,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = &ezx_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index ca053226fba0..ceaed0076366 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -20,15 +20,25 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 
+void clear_reset_status(unsigned int mask)
+{
+        if (cpu_is_pxa2xx())
+                pxa2xx_clear_reset_status(mask);
+
+        if (cpu_is_pxa3xx())
+                pxa3xx_clear_reset_status(mask);
+}
+
 /*
  * Get the clock frequency as reflected by CCCR and the turbo flag.
  * We assume these values have been applied via a fcs.
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 5bb7ae757831..041c048320e4 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -47,12 +47,20 @@ extern unsigned pxa27x_get_memclk_frequency_10khz(void);
 #define pxa27x_get_memclk_frequency_10khz()     (0)
 #endif
 
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+extern void pxa2xx_clear_reset_status(unsigned int);
+#else
+static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
+#endif
+
 #ifdef CONFIG_PXA3xx
 extern unsigned pxa3xx_get_clk_frequency_khz(int);
 extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
+extern void pxa3xx_clear_reset_status(unsigned int);
 #else
 #define pxa3xx_get_clk_frequency_khz(x)         (0)
 #define pxa3xx_get_memclk_frequency_10khz()     (0)
+static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 #endif
 
 extern struct sysdev_class pxa_irq_sysclass;
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 7d3e16970be0..07acc1b23857 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -18,10 +18,10 @@
 #include <linux/sysdev.h>
 
 #include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index bdf239754037..c0092472fa58 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -34,13 +34,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/gumstix.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/gumstix.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 2637633f9166..5aa0270d5605 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -25,18 +25,18 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/idp.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/idp.h>
+#include <mach/pxafb.h>
+#include <mach/bitfield.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/include/mach/akita.h b/arch/arm/mach-pxa/include/mach/akita.h
new file mode 100644
index 000000000000..5d8cc1d9cb10
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/akita.h
@@ -0,0 +1,32 @@
+/*
+ * Hardware specific definitions for SL-C1000 (Akita)
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/* Akita IO Expander GPIOs */
+
+#define AKITA_IOEXP_RESERVED_7      (1 << 7)
+#define AKITA_IOEXP_IR_ON           (1 << 6)
+#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)
+#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)
+#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)
+#define AKITA_IOEXP_MIC_BIAS        (1 << 2)
+#define AKITA_IOEXP_RESERVED_1      (1 << 1)
+#define AKITA_IOEXP_RESERVED_0      (1 << 0)
+
+/* Direction Bitfield  0=output  1=input */
+#define AKITA_IOEXP_IO_DIR      0
+/* Default Values */
+#define AKITA_IOEXP_IO_OUT      (AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP)
+
+extern struct platform_device akitaioexp_device;
+
+void akita_set_ioexp(struct device *dev, unsigned char bitmask);
+void akita_reset_ioexp(struct device *dev, unsigned char bitmask);
+
diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
new file mode 100644
index 000000000000..f82f96dd1053
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/audio.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_ARCH_AUDIO_H__
+#define __ASM_ARCH_AUDIO_H__
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+typedef struct {
+        int (*startup)(struct snd_pcm_substream *, void *);
+        void (*shutdown)(struct snd_pcm_substream *, void *);
+        void (*suspend)(void *);
+        void (*resume)(void *);
+        void *priv;
+} pxa2xx_audio_ops_t;
+
+extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h
new file mode 100644
index 000000000000..f1f0e3387d9c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/bitfield.h
@@ -0,0 +1,113 @@
+/*
+ *      FILE            bitfield.h
+ *
+ *      Version         1.1
+ *      Author          Copyright (c) Marc A. Viredaz, 1998
+ *                      DEC Western Research Laboratory, Palo Alto, CA
+ *      Date            April 1998 (April 1997)
+ *      System          Advanced RISC Machine (ARM)
+ *      Language        C or ARM Assembly
+ *      Purpose         Definition of macros to operate on bit fields.
+ */
+
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data)     ((unsigned long) (Data))
+#else
+#define UData(Data)     (Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ *    The macro "Fld" encodes a bit field, given its size and its shift value
+ *    with respect to bit 0.
+ *
+ * Note
+ *    A more intuitive way to encode bit fields would have been to use their
+ *    mask. However, extracting size and shift value information from a bit
+ *    field's mask is cumbersome and might break the assembler (255-character
+ *    line-size limit).
+ *
+ * Input
+ *    Size              Size of the bit field, in number of bits.
+ *    Shft              Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ *    Fld               Encoded bit field.
+ */
+
+#define Fld(Size, Shft) (((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ *    the size, shift value, mask, aligned mask, and first bit of a
+ *    bit field.
+ *
+ * Input
+ *    Field             Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FSize             Size of the bit field, in number of bits.
+ *    FShft             Shift value of the bit field with respect to bit 0.
+ *    FMsk              Mask for the bit field.
+ *    FAlnMsk           Mask for the bit field, aligned on bit 0.
+ *    F1stBit           First bit of the bit field.
+ */
+
+#define FSize(Field)    ((Field) >> 16)
+#define FShft(Field)    ((Field) & 0x0000FFFF)
+#define FMsk(Field)     (((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field)  ((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field)  (UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ *    The macro "FInsrt" inserts a value into a bit field by shifting the
+ *    former appropriately.
+ *
+ * Input
+ *    Value             Bit-field value.
+ *    Field             Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FInsrt            Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+                        (UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ *    The macro "FExtr" extracts the value of a bit field by masking and
+ *    shifting it appropriately.
+ *
+ * Input
+ *    Data              Data containing the bit-field to be extracted.
+ *    Field             Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FExtr             Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+                        ((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
new file mode 100644
index 000000000000..39516ced8b1f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/camera.h
@@ -0,0 +1,48 @@
+/*
+    camera.h - PXA camera driver header file
+
+    Copyright (C) 2003, Intel Corporation
+    Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define PXA_CAMERA_MASTER       1
+#define PXA_CAMERA_DATAWIDTH_4  2
+#define PXA_CAMERA_DATAWIDTH_5  4
+#define PXA_CAMERA_DATAWIDTH_8  8
+#define PXA_CAMERA_DATAWIDTH_9  0x10
+#define PXA_CAMERA_DATAWIDTH_10 0x20
+#define PXA_CAMERA_PCLK_EN      0x40
+#define PXA_CAMERA_MCLK_EN      0x80
+#define PXA_CAMERA_PCP          0x100
+#define PXA_CAMERA_HSP          0x200
+#define PXA_CAMERA_VSP          0x400
+
+struct pxacamera_platform_data {
+        int (*init)(struct device *);
+        int (*power)(struct device *, int);
+        int (*reset)(struct device *, int);
+
+        unsigned long flags;
+        unsigned long mclk_10khz;
+};
+
+extern void pxa_set_camera_info(struct pxacamera_platform_data *);
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
new file mode 100644
index 000000000000..2ae373fb5675
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -0,0 +1,19 @@
+#ifndef _COLIBRI_H_
+#define _COLIBRI_H_
+
+/* physical memory regions */
+#define COLIBRI_FLASH_PHYS      (PXA_CS0_PHYS)  /* Flash region */
+#define COLIBRI_ETH_PHYS        (PXA_CS2_PHYS)  /* Ethernet DM9000 region */
+#define COLIBRI_SDRAM_BASE      0xa0000000      /* SDRAM region */
+
+/* virtual memory regions */
+#define COLIBRI_DISK_VIRT       0xF0000000      /* Disk On Chip region */
+
+/* size of flash */
+#define COLIBRI_FLASH_SIZE      0x02000000      /* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000             114
+#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000)
+
+#endif /* _COLIBRI_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
new file mode 100644
index 000000000000..bf856503baf6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -0,0 +1,109 @@
+/*
+ * Hardware specific definitions for SL-C7xx series of PDAs
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_CORGI_H
+#define __ASM_ARCH_CORGI_H  1
+
+
+/*
+ * Corgi (Non Standard) GPIO Definitions
+ */
+#define CORGI_GPIO_KEY_INT                      (0)     /* Keyboard Interrupt */
+#define CORGI_GPIO_AC_IN                        (1) /* Charger Detection */
+#define CORGI_GPIO_WAKEUP                       (3) /* System wakeup notification? */
+#define CORGI_GPIO_AK_INT                       (4)     /* Headphone Jack Control Interrupt */
+#define CORGI_GPIO_TP_INT                       (5)     /* Touch Panel Interrupt */
+#define CORGI_GPIO_nSD_WP                       (7) /* SD Write Protect? */
+#define CORGI_GPIO_nSD_DETECT           (9) /* MMC/SD Card Detect */
+#define CORGI_GPIO_nSD_INT                      (10) /* SD Interrupt for SDIO? */
+#define CORGI_GPIO_MAIN_BAT_LOW         (11) /* Main Battery Low Notification */
+#define CORGI_GPIO_BAT_COVER            (11) /* Battery Cover Detect */
+#define CORGI_GPIO_LED_ORANGE           (13) /* Orange LED Control */
+#define CORGI_GPIO_CF_CD                        (14) /* Compact Flash Card Detect */
+#define CORGI_GPIO_CHRG_FULL            (16) /* Charging Complete Notification */
+#define CORGI_GPIO_CF_IRQ                       (17) /* Compact Flash Interrupt */
+#define CORGI_GPIO_LCDCON_CS            (19) /* LCD Control Chip Select */
+#define CORGI_GPIO_MAX1111_CS           (20) /* MAX1111 Chip Select */
+#define CORGI_GPIO_ADC_TEMP_ON          (21) /* Select battery voltage or temperature */
+#define CORGI_GPIO_IR_ON                        (22) /* Enable IR Transciever */
+#define CORGI_GPIO_ADS7846_CS           (24) /* ADS7846 Chip Select */
+#define CORGI_GPIO_SD_PWR                       (33) /* MMC/SD Power */
+#define CORGI_GPIO_CHRG_ON                      (38) /* Enable battery Charging */
+#define CORGI_GPIO_DISCHARGE_ON         (42) /* Enable battery Discharge */
+#define CORGI_GPIO_CHRG_UKN                     (43) /* Unknown Charging (Bypass Control?) */
+#define CORGI_GPIO_HSYNC                        (44) /* LCD HSync Pulse */
+#define CORGI_GPIO_USB_PULLUP           (45) /* USB show presence to host */
+
+
+/*
+ * Corgi Keyboard Definitions
+ */
+#define CORGI_KEY_STROBE_NUM            (12)
+#define CORGI_KEY_SENSE_NUM                     (8)
+#define CORGI_GPIO_ALL_STROBE_BIT       (0x00003ffc)
+#define CORGI_GPIO_HIGH_SENSE_BIT       (0xfc000000)
+#define CORGI_GPIO_HIGH_SENSE_RSHIFT    (26)
+#define CORGI_GPIO_LOW_SENSE_BIT        (0x00000003)
+#define CORGI_GPIO_LOW_SENSE_LSHIFT     (6)
+#define CORGI_GPIO_STROBE_BIT(a)        GPIO_bit(66+(a))
+#define CORGI_GPIO_SENSE_BIT(a)         GPIO_bit(58+(a))
+#define CORGI_GAFR_ALL_STROBE_BIT       (0x0ffffff0)
+#define CORGI_GAFR_HIGH_SENSE_BIT       (0xfff00000)
+#define CORGI_GAFR_LOW_SENSE_BIT        (0x0000000f)
+#define CORGI_GPIO_KEY_SENSE(a)         (58+(a))
+#define CORGI_GPIO_KEY_STROBE(a)        (66+(a))
+
+
+/*
+ * Corgi Interrupts
+ */
+#define CORGI_IRQ_GPIO_KEY_INT          IRQ_GPIO(0)
+#define CORGI_IRQ_GPIO_AC_IN            IRQ_GPIO(1)
+#define CORGI_IRQ_GPIO_WAKEUP           IRQ_GPIO(3)
+#define CORGI_IRQ_GPIO_AK_INT           IRQ_GPIO(4)
+#define CORGI_IRQ_GPIO_TP_INT           IRQ_GPIO(5)
+#define CORGI_IRQ_GPIO_nSD_DETECT       IRQ_GPIO(9)
+#define CORGI_IRQ_GPIO_nSD_INT          IRQ_GPIO(10)
+#define CORGI_IRQ_GPIO_MAIN_BAT_LOW     IRQ_GPIO(11)
+#define CORGI_IRQ_GPIO_CF_CD            IRQ_GPIO(14)
+#define CORGI_IRQ_GPIO_CHRG_FULL        IRQ_GPIO(16)    /* Battery fully charged */
+#define CORGI_IRQ_GPIO_CF_IRQ           IRQ_GPIO(17)
+#define CORGI_IRQ_GPIO_KEY_SENSE(a)     IRQ_GPIO(58+(a))        /* Keyboard Sense lines */
+
+
+/*
+ * Corgi SCOOP GPIOs and Config
+ */
+#define CORGI_SCP_LED_GREEN             SCOOP_GPCR_PA11
+#define CORGI_SCP_SWA                   SCOOP_GPCR_PA12  /* Hinge Switch A */
+#define CORGI_SCP_SWB                   SCOOP_GPCR_PA13  /* Hinge Switch B */
+#define CORGI_SCP_MUTE_L                SCOOP_GPCR_PA14
+#define CORGI_SCP_MUTE_R                SCOOP_GPCR_PA15
+#define CORGI_SCP_AKIN_PULLUP   SCOOP_GPCR_PA16
+#define CORGI_SCP_APM_ON                SCOOP_GPCR_PA17
+#define CORGI_SCP_BACKLIGHT_CONT        SCOOP_GPCR_PA18
+#define CORGI_SCP_MIC_BIAS              SCOOP_GPCR_PA19
+
+#define CORGI_SCOOP_IO_DIR      ( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
+                        CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
+                        CORGI_SCP_MIC_BIAS )
+#define CORGI_SCOOP_IO_OUT      ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
+
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device corgiscoop_device;
+extern struct platform_device corgissp_device;
+
+#endif /* __ASM_ARCH_CORGI_H  */
+
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
new file mode 100644
index 000000000000..55d6a175ab19
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -0,0 +1,25 @@
+/* arch/arm/mach-pxa/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include "hardware.h"
+
+                .macro  addruart,rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1                 @ MMU enabled?
+                moveq   \rx, #0x40000000                @ physical
+                movne   \rx, #io_p2v(0x40000000)        @ virtual
+                orr     \rx, \rx, #0x00100000
+                .endm
+
+#define UART_SHIFT      2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
new file mode 100644
index 000000000000..955bfe606067
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/dma.h
+ *
+ *  Author:     Nicolas Pitre
+ *  Created:    Jun 15, 2001
+ *  Copyright:  MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+        volatile u32 ddadr;     /* Points to the next descriptor + flags */
+        volatile u32 dsadr;     /* DSADR value for the current transfer */
+        volatile u32 dtadr;     /* DTADR value for the current transfer */
+        volatile u32 dcmd;      /* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+        DMA_PRIO_HIGH = 0,
+        DMA_PRIO_MEDIUM = 1,
+        DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define HAVE_ARCH_PCI_SET_DMA_MASK      1
+#endif
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int num_ch);
+
+int pxa_request_dma (char *name,
+                         pxa_dma_prio prio,
+                         void (*irq_handler)(int, void *),
+                         void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
new file mode 100644
index 000000000000..de16c12d5232
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-pxa/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PXA-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+                .macro  disable_fiq
+                .endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
+
+                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+                mrc     p15, 0, \tmp, c0, c0, 0         @ CPUID
+                mov     \tmp, \tmp, lsr #13
+                and     \tmp, \tmp, #0x7                @ Core G
+                cmp     \tmp, #1
+                bhi     1004f
+
+                mov     \base, #io_p2v(0x40000000)      @ IIR Ctl = 0x40d00000
+                add     \base, \base, #0x00d00000
+                ldr     \irqstat, [\base, #0]           @ ICIP
+                ldr     \irqnr, [\base, #4]             @ ICMR
+                b       1002f
+
+1004:
+                mrc     p6, 0, \irqstat, c6, c0, 0      @ ICIP2
+                mrc     p6, 0, \irqnr, c7, c0, 0        @ ICMR2
+                ands    \irqnr, \irqstat, \irqnr
+                beq     1003f
+                rsb     \irqstat, \irqnr, #0
+                and     \irqstat, \irqstat, \irqnr
+                clz     \irqnr, \irqstat
+                rsb     \irqnr, \irqnr, #31
+                add     \irqnr, \irqnr, #32
+                b       1001f
+1003:
+                mrc     p6, 0, \irqstat, c0, c0, 0      @ ICIP
+                mrc     p6, 0, \irqnr, c1, c0, 0        @ ICMR
+1002:
+                ands    \irqnr, \irqstat, \irqnr
+                beq     1001f
+                rsb     \irqstat, \irqnr, #0
+                and     \irqstat, \irqstat, \irqnr
+                clz     \irqnr, \irqstat
+                rsb     \irqnr, \irqnr, #31
+1001:
+                .endm
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
new file mode 100644
index 000000000000..4c90b1310270
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -0,0 +1,50 @@
+/*
+ *  eseries-gpio.h
+ *
+ *  Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+/* e-series power button */
+#define GPIO_ESERIES_POWERBTN     0
+
+/* UDC GPIO definitions */
+#define GPIO_E7XX_USB_DISC       13
+#define GPIO_E7XX_USB_PULLUP      3
+
+#define GPIO_E800_USB_DISC        4
+#define GPIO_E800_USB_PULLUP     84
+
+/* e740 PCMCIA GPIO definitions */
+/* Note: PWR1 seems to be inverted */
+#define GPIO_E740_PCMCIA_CD0      8
+#define GPIO_E740_PCMCIA_CD1     44
+#define GPIO_E740_PCMCIA_RDY0    11
+#define GPIO_E740_PCMCIA_RDY1     6
+#define GPIO_E740_PCMCIA_RST0    27
+#define GPIO_E740_PCMCIA_RST1    24
+#define GPIO_E740_PCMCIA_PWR0    20
+#define GPIO_E740_PCMCIA_PWR1    23
+
+/* e750 PCMCIA GPIO definitions */
+#define GPIO_E750_PCMCIA_CD0      8
+#define GPIO_E750_PCMCIA_RDY0    12
+#define GPIO_E750_PCMCIA_RST0    27
+#define GPIO_E750_PCMCIA_PWR0    20
+
+/* e800 PCMCIA GPIO definitions */
+#define GPIO_E800_PCMCIA_RST0    69
+#define GPIO_E800_PCMCIA_RST1    72
+#define GPIO_E800_PCMCIA_PWR0    20
+#define GPIO_E800_PCMCIA_PWR1    73
+
+/* e7xx IrDA power control */
+#define GPIO_E7XX_IR_ON          38
+
+/* ASIC related GPIOs */
+#define GPIO_ESERIES_TMIO_IRQ        5
+#define GPIO_E800_ANGELX_IRQ      8
diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h
new file mode 100644
index 000000000000..f2a93d5e31d3
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h
@@ -0,0 +1,27 @@
+/*
+ *  eseries-irq.h
+ *
+ *  Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
+#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
+
+#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
+#define ANGELX_ST0_IRQ  IRQ_ANGELX(1)
+#define ANGELX_CD0_IRQ  IRQ_ANGELX(2)
+#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
+#define ANGELX_ST1_IRQ  IRQ_ANGELX(4)
+#define ANGELX_CD1_IRQ  IRQ_ANGELX(5)
+
+#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
+#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
+
+#define TMIO_SD_IRQ     IRQ_TMIO(1)
+#define TMIO_USB_IRQ    IRQ_TMIO(2)
+
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
new file mode 100644
index 000000000000..2c538d8c362d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-pxa/include/mach/gpio.h
+ *
+ * PXA GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_PXA_GPIO_H
+#define __ASM_ARCH_PXA_GPIO_H
+
+#include <mach/pxa-regs.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <asm-generic/gpio.h>
+
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space.
+ */
+#define NR_BUILTIN_GPIO 128
+
+static inline int gpio_get_value(unsigned gpio)
+{
+        if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
+                return GPLR(gpio) & GPIO_bit(gpio);
+        else
+                return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+        if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
+                if (value)
+                        GPSR(gpio) = GPIO_bit(gpio);
+                else
+                        GPCR(gpio) = GPIO_bit(gpio);
+        } else {
+                __gpio_set_value(gpio, value);
+        }
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio)       IRQ_GPIO(gpio)
+#define irq_to_gpio(irq)        IRQ_TO_GPIO(irq)
+
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
new file mode 100644
index 000000000000..42ee1956750e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -0,0 +1,96 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/gumstix.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* BTRESET - Reset line to Bluetooth module, active low signal. */
+#define GPIO_GUMSTIX_BTRESET          7
+#define GPIO_GUMSTIX_BTRESET_MD         (GPIO_GUMSTIX_BTRESET | GPIO_OUT)
+
+
+/*
+GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
+interrupt signal for determining cable presence. On the original gumstix,
+this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+this moves to GPIO17 and GPIO37. */
+
+/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
+has detected a cable insertion; driven low otherwise. */
+
+#ifdef CONFIG_ARCH_GUMSTIX_ORIG
+
+#define GPIO_GUMSTIX_USB_GPIOn          81
+#define GPIO_GUMSTIX_USB_GPIOx          83
+
+#else
+
+#define GPIO_GUMSTIX_USB_GPIOn          35
+#define GPIO_GUMSTIX_USB_GPIOx          41
+
+#endif
+
+/* usb state change */
+#define GUMSTIX_USB_INTR_IRQ            IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
+
+#define GPIO_GUMSTIX_USB_GPIOn_MD       (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
+#define GPIO_GUMSTIX_USB_GPIOx_CON_MD   (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
+#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD   (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
+
+/*
+ * SD/MMC definitions
+ */
+#define GUMSTIX_GPIO_nSD_WP             22 /* SD Write Protect */
+#define GUMSTIX_GPIO_nSD_DETECT         11 /* MMC/SD Card Detect */
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
+
+/*
+ * SMC Ethernet definitions
+ * ETH_RST provides a hardware reset line to the ethernet chip
+ * ETH is the IRQ line in from the ethernet chip to the PXA
+ */
+#define GPIO_GUMSTIX_ETH0_RST           80
+#define GPIO_GUMSTIX_ETH0_RST_MD        (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
+#define GPIO_GUMSTIX_ETH1_RST           52
+#define GPIO_GUMSTIX_ETH1_RST_MD        (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
+
+#define GPIO_GUMSTIX_ETH0               36
+#define GPIO_GUMSTIX_ETH0_MD            (GPIO_GUMSTIX_ETH0 | GPIO_IN)
+#define GUMSTIX_ETH0_IRQ                IRQ_GPIO(GPIO_GUMSTIX_ETH0)
+#define GPIO_GUMSTIX_ETH1               27
+#define GPIO_GUMSTIX_ETH1_MD            (GPIO_GUMSTIX_ETH1 | GPIO_IN)
+#define GUMSTIX_ETH1_IRQ                IRQ_GPIO(GPIO_GUMSTIX_ETH1)
+
+
+/* CF reset line */
+#define GPIO8_RESET                     8
+
+/* CF slot 0 */
+#define GPIO4_nBVD1                     4
+#define GPIO4_nSTSCHG                   GPIO4_nBVD1
+#define GPIO11_nCD                      11
+#define GPIO26_PRDY_nBSY                26
+#define GUMSTIX_S0_nSTSCHG_IRQ          IRQ_GPIO(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nCD_IRQ              IRQ_GPIO(GPIO11_nCD)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ        IRQ_GPIO(GPIO26_PRDY_nBSY)
+
+/* CF slot 1 */
+#define GPIO18_nBVD1                    18
+#define GPIO18_nSTSCHG                  GPIO18_nBVD1
+#define GPIO36_nCD                      36
+#define GPIO27_PRDY_nBSY                27
+#define GUMSTIX_S1_nSTSCHG_IRQ          IRQ_GPIO(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nCD_IRQ              IRQ_GPIO(GPIO36_nCD)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ        IRQ_GPIO(GPIO27_PRDY_nBSY)
+
+/* CF GPIO line modes */
+#define GPIO4_nSTSCHG_MD                (GPIO4_nSTSCHG | GPIO_IN)
+#define GPIO8_RESET_MD                  (GPIO8_RESET | GPIO_OUT)
+#define GPIO11_nCD_MD                   (GPIO11_nCD | GPIO_IN)
+#define GPIO18_nSTSCHG_MD               (GPIO18_nSTSCHG | GPIO_IN)
+#define GPIO26_PRDY_nBSY_MD             (GPIO26_PRDY_nBSY | GPIO_IN)
+#define GPIO27_PRDY_nBSY_MD             (GPIO27_PRDY_nBSY | GPIO_IN)
+#define GPIO36_nCD_MD                   (GPIO36_nCD | GPIO_IN)
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
new file mode 100644
index 000000000000..e89df4d0d239
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -0,0 +1,235 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/hardware.h
+ *
+ *  Author:     Nicolas Pitre
+ *  Created:    Jun 15, 2001
+ *  Copyright:  MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * We requires absolute addresses.
+ */
+#define PCIO_BASE               0
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0         0xff000000
+#define UNCACHED_ADDR           UNCACHED_PHYS_0
+
+/*
+ * Intel PXA2xx internal register mapping:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x)       (*((volatile u32 *)io_p2v(x)))
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+   especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y)    \
+        (*(volatile u32 *)((u32)&__REG(x) + (y)))
+
+# define __PREG(x)      (io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x)       io_p2v(x)
+# define __PREG(x)      io_v2p(x)
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PXA25x
+#define __cpu_is_pxa21x(id)                             \
+        ({                                              \
+                unsigned int _id = (id) >> 4 & 0xf3f;   \
+                _id == 0x212;                           \
+        })
+
+#define __cpu_is_pxa255(id)                             \
+        ({                                              \
+                unsigned int _id = (id) >> 4 & 0xfff;   \
+                _id == 0x2d0;                           \
+         })
+
+#define __cpu_is_pxa25x(id)                             \
+        ({                                              \
+                unsigned int _id = (id) >> 4 & 0xfff;   \
+                _id == 0x2d0 || _id == 0x290;           \
+        })
+#else
+#define __cpu_is_pxa21x(id)     (0)
+#define __cpu_is_pxa255(id)     (0)
+#define __cpu_is_pxa25x(id)     (0)
+#endif
+
+#ifdef CONFIG_PXA27x
+#define __cpu_is_pxa27x(id)                             \
+        ({                                              \
+                unsigned int _id = (id) >> 4 & 0xfff;   \
+                _id == 0x411;                           \
+        })
+#else
+#define __cpu_is_pxa27x(id)     (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA300
+#define __cpu_is_pxa300(id)                             \
+        ({                                              \
+                unsigned int _id = (id) >> 4 & 0xfff;   \
+                _id == 0x688;                           \
+         })
+#else
+#define __cpu_is_pxa300(id)     (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA310
+#define __cpu_is_pxa310(id)                             \
+        ({                                              \
+                unsigned int _id = (id) >> 4 & 0xfff;   \
+                _id == 0x689;                           \
+         })
+#else
+#define __cpu_is_pxa310(id)     (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+#define __cpu_is_pxa320(id)                             \
+        ({                                              \
+                unsigned int _id = (id) >> 4 & 0xfff;   \
+                _id == 0x603 || _id == 0x682;           \
+         })
+#else
+#define __cpu_is_pxa320(id)     (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define __cpu_is_pxa930(id)                             \
+        ({                                              \
+                unsigned int _id = (id) >> 4 & 0xfff;   \
+                _id == 0x683;           \
+         })
+#else
+#define __cpu_is_pxa930(id)     (0)
+#endif
+
+#define cpu_is_pxa21x()                                 \
+        ({                                              \
+                __cpu_is_pxa21x(read_cpuid_id());       \
+        })
+
+#define cpu_is_pxa255()                                 \
+        ({                                              \
+                __cpu_is_pxa255(read_cpuid_id());       \
+        })
+
+#define cpu_is_pxa25x()                                 \
+        ({                                              \
+                __cpu_is_pxa25x(read_cpuid_id());       \
+        })
+
+#define cpu_is_pxa27x()                                 \
+        ({                                              \
+                __cpu_is_pxa27x(read_cpuid_id());       \
+        })
+
+#define cpu_is_pxa300()                                 \
+        ({                                              \
+                __cpu_is_pxa300(read_cpuid_id());       \
+         })
+
+#define cpu_is_pxa310()                                 \
+        ({                                              \
+                __cpu_is_pxa310(read_cpuid_id());       \
+         })
+
+#define cpu_is_pxa320()                                 \
+        ({                                              \
+                __cpu_is_pxa320(read_cpuid_id());       \
+         })
+
+#define cpu_is_pxa930()                                 \
+        ({                                              \
+                unsigned int id = read_cpuid(CPUID_ID); \
+                __cpu_is_pxa930(id);                    \
+         })
+
+/*
+ * CPUID Core Generation Bit
+ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
+ * == 0x3 for pxa300/pxa310/pxa320
+ */
+#define __cpu_is_pxa2xx(id)                             \
+        ({                                              \
+                unsigned int _id = (id) >> 13 & 0x7;    \
+                _id <= 0x2;                             \
+         })
+
+#define __cpu_is_pxa3xx(id)                             \
+        ({                                              \
+                unsigned int _id = (id) >> 13 & 0x7;    \
+                _id == 0x3;                             \
+         })
+
+#define cpu_is_pxa2xx()                                 \
+        ({                                              \
+                __cpu_is_pxa2xx(read_cpuid_id());       \
+         })
+
+#define cpu_is_pxa3xx()                                 \
+        ({                                              \
+                __cpu_is_pxa3xx(read_cpuid_id());       \
+         })
+
+/*
+ * Handy routine to set GPIO alternate functions
+ */
+extern int pxa_gpio_mode( int gpio_mode );
+
+/*
+ * Return GPIO level, nonzero means high, zero is low
+ */
+extern int pxa_gpio_get_value(unsigned gpio);
+
+/*
+ * Set output GPIO level
+ */
+extern void pxa_gpio_set_value(unsigned gpio, int value);
+
+/*
+ * return current memory and LCD clock frequency in units of 10kHz
+ */
+extern unsigned int get_memclk_frequency_10khz(void);
+
+#endif
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define PCIBIOS_MIN_IO          0
+#define PCIBIOS_MIN_MEM         0
+#define pcibios_assign_all_busses()     1
+#endif
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
new file mode 100644
index 000000000000..80596b013443
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/i2c.h
@@ -0,0 +1,77 @@
+/*
+ *  i2c_pxa.h
+ *
+ *  Copyright (C) 2002 Intrinsyc Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#ifndef _I2C_PXA_H_
+#define _I2C_PXA_H_
+
+#if 0
+#define DEF_TIMEOUT             3
+#else
+/* need a longer timeout if we're dealing with the fact we may well be
+ * looking at a multi-master environment
+*/
+#define DEF_TIMEOUT             32
+#endif
+
+#define BUS_ERROR               (-EREMOTEIO)
+#define XFER_NAKED              (-ECONNREFUSED)
+#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
+
+/* ICR initialize bit values
+*
+*  15. FM       0 (100 Khz operation)
+*  14. UR       0 (No unit reset)
+*  13. SADIE    0 (Disables the unit from interrupting on slave addresses
+*                                       matching its slave address)
+*  12. ALDIE    0 (Disables the unit from interrupt when it loses arbitration
+*                                       in master mode)
+*  11. SSDIE    0 (Disables interrupts from a slave stop detected, in slave mode)
+*  10. BEIE     1 (Enable interrupts from detected bus errors, no ACK sent)
+*  9.  IRFIE    1 (Enable interrupts from full buffer received)
+*  8.  ITEIE    1 (Enables the I2C unit to interrupt when transmit buffer empty)
+*  7.  GCD      1 (Disables i2c unit response to general call messages as a slave)
+*  6.  IUE      0 (Disable unit until we change settings)
+*  5.  SCLE     1 (Enables the i2c clock output for master mode (drives SCL)
+*  4.  MA       0 (Only send stop with the ICR stop bit)
+*  3.  TB       0 (We are not transmitting a byte initially)
+*  2.  ACKNAK   0 (Send an ACK after the unit receives a byte)
+*  1.  STOP     0 (Do not send a STOP)
+*  0.  START    0 (Do not send a START)
+*
+*/
+#define I2C_ICR_INIT    (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+
+/* I2C status register init values
+ *
+ * 10. BED      1 (Clear bus error detected)
+ * 9.  SAD      1 (Clear slave address detected)
+ * 7.  IRF      1 (Clear IDBR Receive Full)
+ * 6.  ITE      1 (Clear IDBR Transmit Empty)
+ * 5.  ALD      1 (Clear Arbitration Loss Detected)
+ * 4.  SSD      1 (Clear Slave Stop Detected)
+ */
+#define I2C_ISR_INIT    0x7FF  /* status register init */
+
+struct i2c_slave_client;
+
+struct i2c_pxa_platform_data {
+        unsigned int            slave_addr;
+        struct i2c_slave_client *slave;
+        unsigned int            class;
+        int                     use_pio;
+};
+
+extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
+
+#ifdef CONFIG_PXA27x
+extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
new file mode 100644
index 000000000000..5eff96fcc944
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -0,0 +1,199 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/idp.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
+ *
+ * 2001-09-13: Cliff Brake <cbrake@accelent.com>
+ *             Initial code
+ *
+ * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
+ *             <http://www.vibren.com> <http://bec-systems.com>
+ *             Changes for 2.6 kernel.
+ */
+
+
+/*
+ * Note: this file must be safe to include in assembly files
+ *
+ * Support for the Vibren PXA255 IDP requires rev04 or later
+ * IDP hardware.
+ */
+
+
+#define IDP_FLASH_PHYS          (PXA_CS0_PHYS)
+#define IDP_ALT_FLASH_PHYS      (PXA_CS1_PHYS)
+#define IDP_MEDIAQ_PHYS         (PXA_CS3_PHYS)
+#define IDP_IDE_PHYS            (PXA_CS5_PHYS + 0x03000000)
+#define IDP_ETH_PHYS            (PXA_CS5_PHYS + 0x03400000)
+#define IDP_COREVOLT_PHYS       (PXA_CS5_PHYS + 0x03800000)
+#define IDP_CPLD_PHYS           (PXA_CS5_PHYS + 0x03C00000)
+
+
+/*
+ * virtual memory map
+ */
+
+#define IDP_COREVOLT_VIRT       (0xf0000000)
+#define IDP_COREVOLT_SIZE       (1*1024*1024)
+
+#define IDP_CPLD_VIRT           (IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
+#define IDP_CPLD_SIZE           (1*1024*1024)
+
+#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
+#error Your custom IO space is getting a bit large !!
+#endif
+
+#define CPLD_P2V(x)             ((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
+#define CPLD_V2P(x)             ((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __CPLD_REG(x)         (*((volatile unsigned long *)CPLD_P2V(x)))
+#else
+#  define __CPLD_REG(x)         CPLD_P2V(x)
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
+
+#define _IDP_CPLD_REV                   (IDP_CPLD_PHYS + 0x00)
+#define _IDP_CPLD_PERIPH_PWR            (IDP_CPLD_PHYS + 0x04)
+#define _IDP_CPLD_LED_CONTROL           (IDP_CPLD_PHYS + 0x08)
+#define _IDP_CPLD_KB_COL_HIGH           (IDP_CPLD_PHYS + 0x0C)
+#define _IDP_CPLD_KB_COL_LOW            (IDP_CPLD_PHYS + 0x10)
+#define _IDP_CPLD_PCCARD_EN             (IDP_CPLD_PHYS + 0x14)
+#define _IDP_CPLD_GPIOH_DIR             (IDP_CPLD_PHYS + 0x18)
+#define _IDP_CPLD_GPIOH_VALUE           (IDP_CPLD_PHYS + 0x1C)
+#define _IDP_CPLD_GPIOL_DIR             (IDP_CPLD_PHYS + 0x20)
+#define _IDP_CPLD_GPIOL_VALUE           (IDP_CPLD_PHYS + 0x24)
+#define _IDP_CPLD_PCCARD_PWR            (IDP_CPLD_PHYS + 0x28)
+#define _IDP_CPLD_MISC_CTRL             (IDP_CPLD_PHYS + 0x2C)
+#define _IDP_CPLD_LCD                   (IDP_CPLD_PHYS + 0x30)
+#define _IDP_CPLD_FLASH_WE              (IDP_CPLD_PHYS + 0x34)
+
+#define _IDP_CPLD_KB_ROW                (IDP_CPLD_PHYS + 0x50)
+#define _IDP_CPLD_PCCARD0_STATUS        (IDP_CPLD_PHYS + 0x54)
+#define _IDP_CPLD_PCCARD1_STATUS        (IDP_CPLD_PHYS + 0x58)
+#define _IDP_CPLD_MISC_STATUS           (IDP_CPLD_PHYS + 0x5C)
+
+/* FPGA register virtual addresses */
+
+#define IDP_CPLD_REV                    __CPLD_REG(_IDP_CPLD_REV)
+#define IDP_CPLD_PERIPH_PWR             __CPLD_REG(_IDP_CPLD_PERIPH_PWR)
+#define IDP_CPLD_LED_CONTROL            __CPLD_REG(_IDP_CPLD_LED_CONTROL)
+#define IDP_CPLD_KB_COL_HIGH            __CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
+#define IDP_CPLD_KB_COL_LOW             __CPLD_REG(_IDP_CPLD_KB_COL_LOW)
+#define IDP_CPLD_PCCARD_EN              __CPLD_REG(_IDP_CPLD_PCCARD_EN)
+#define IDP_CPLD_GPIOH_DIR              __CPLD_REG(_IDP_CPLD_GPIOH_DIR)
+#define IDP_CPLD_GPIOH_VALUE            __CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
+#define IDP_CPLD_GPIOL_DIR              __CPLD_REG(_IDP_CPLD_GPIOL_DIR)
+#define IDP_CPLD_GPIOL_VALUE            __CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
+#define IDP_CPLD_PCCARD_PWR             __CPLD_REG(_IDP_CPLD_PCCARD_PWR)
+#define IDP_CPLD_MISC_CTRL              __CPLD_REG(_IDP_CPLD_MISC_CTRL)
+#define IDP_CPLD_LCD                    __CPLD_REG(_IDP_CPLD_LCD)
+#define IDP_CPLD_FLASH_WE               __CPLD_REG(_IDP_CPLD_FLASH_WE)
+
+#define IDP_CPLD_KB_ROW                 __CPLD_REG(_IDP_CPLD_KB_ROW)
+#define IDP_CPLD_PCCARD0_STATUS         __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
+#define IDP_CPLD_PCCARD1_STATUS         __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
+#define IDP_CPLD_MISC_STATUS            __CPLD_REG(_IDP_CPLD_MISC_STATUS)
+
+
+/*
+ * Bit masks for various registers
+ */
+
+// IDP_CPLD_PCCARD_PWR
+#define PCC0_PWR0       (1 << 0)
+#define PCC0_PWR1       (1 << 1)
+#define PCC0_PWR2       (1 << 2)
+#define PCC0_PWR3       (1 << 3)
+#define PCC1_PWR0       (1 << 4)
+#define PCC1_PWR1       (1 << 5)
+#define PCC1_PWR2       (1 << 6)
+#define PCC1_PWR3       (1 << 7)
+
+// IDP_CPLD_PCCARD_EN
+#define PCC0_RESET      (1 << 6)
+#define PCC1_RESET      (1 << 7)
+#define PCC0_ENABLE     (1 << 0)
+#define PCC1_ENABLE     (1 << 1)
+
+// IDP_CPLD_PCCARDx_STATUS
+#define _PCC_WRPROT     (1 << 7) // 7-4 read as low true
+#define _PCC_RESET      (1 << 6)
+#define _PCC_IRQ        (1 << 5)
+#define _PCC_INPACK     (1 << 4)
+#define PCC_BVD2        (1 << 3)
+#define PCC_BVD1        (1 << 2)
+#define PCC_VS2         (1 << 1)
+#define PCC_VS1         (1 << 0)
+
+#define PCC_DETECT(x)   (GPLR(7 + (x)) & GPIO_bit(7 + (x)))
+
+/* A listing of interrupts used by external hardware devices */
+
+#define TOUCH_PANEL_IRQ                 IRQ_GPIO(5)
+#define IDE_IRQ                         IRQ_GPIO(21)
+
+#define TOUCH_PANEL_IRQ_EDGE            IRQ_TYPE_EDGE_FALLING
+
+#define ETHERNET_IRQ                    IRQ_GPIO(4)
+#define ETHERNET_IRQ_EDGE               IRQ_TYPE_EDGE_RISING
+
+#define IDE_IRQ_EDGE                    IRQ_TYPE_EDGE_RISING
+
+#define PCMCIA_S0_CD_VALID              IRQ_GPIO(7)
+#define PCMCIA_S0_CD_VALID_EDGE         IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S1_CD_VALID              IRQ_GPIO(8)
+#define PCMCIA_S1_CD_VALID_EDGE         IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S0_RDYINT                IRQ_GPIO(19)
+#define PCMCIA_S1_RDYINT                IRQ_GPIO(22)
+
+
+/*
+ * Macros for LED Driver
+ */
+
+/* leds 0 = ON */
+#define IDP_HB_LED      (1<<5)
+#define IDP_BUSY_LED    (1<<6)
+
+#define IDP_LEDS_MASK   (IDP_HB_LED | IDP_BUSY_LED)
+
+/*
+ * macros for MTD driver
+ */
+
+#define FLASH_WRITE_PROTECT_DISABLE()   ((IDP_CPLD_FLASH_WE) &= ~(0x1))
+#define FLASH_WRITE_PROTECT_ENABLE()    ((IDP_CPLD_FLASH_WE) |= (0x1))
+
+/*
+ * macros for matrix keyboard driver
+ */
+
+#define KEYBD_MATRIX_NUMBER_INPUTS      7
+#define KEYBD_MATRIX_NUMBER_OUTPUTS     14
+
+#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC        FALSE
+#define KEYBD_MATRIX_INVERT_INPUT_LOGIC         FALSE
+
+#define KEYBD_MATRIX_SETTLING_TIME_US                   100
+#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT         2
+
+#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
+{\
+        IDP_CPLD_KB_COL_LOW = outputs;\
+        IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
+}
+
+#define KEYBD_MATRIX_GET_INPUTS(inputs) \
+{\
+        inputs = (IDP_CPLD_KB_ROW & 0x7f);\
+}
+
+
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
new file mode 100644
index 000000000000..600fd4f76603
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pxa/include/mach/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)                 ((void __iomem *)(a))
+#define __mem_pci(a)            (a)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
new file mode 100644
index 000000000000..0a50c3c763df
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/irda.h
@@ -0,0 +1,23 @@
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_OFF          1
+#define IR_SIRMODE      2
+#define IR_FIRMODE      4
+
+struct pxaficp_platform_data {
+        int transceiver_cap;
+        void (*transceiver_mode)(struct device *dev, int mode);
+        int (*startup)(struct device *dev);
+        void (*shutdown)(struct device *dev);
+};
+
+extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+void pxa2xx_transceiver_mode(struct device *dev, int mode);
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
new file mode 100644
index 000000000000..32772bc6925c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -0,0 +1,264 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/irqs.h
+ *
+ *  Author:     Nicolas Pitre
+ *  Created:    Jun 15, 2001
+ *  Copyright:  MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#define PXA_IRQ(x)      (x)
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_SSP3        PXA_IRQ(0)      /* SSP3 service request */
+#define IRQ_MSL         PXA_IRQ(1)      /* MSL Interface interrupt */
+#define IRQ_USBH2       PXA_IRQ(2)      /* USB Host interrupt 1 (OHCI) */
+#define IRQ_USBH1       PXA_IRQ(3)      /* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_KEYPAD      PXA_IRQ(4)      /* Key pad controller */
+#define IRQ_MEMSTK      PXA_IRQ(5)      /* Memory Stick interrupt */
+#define IRQ_PWRI2C      PXA_IRQ(6)      /* Power I2C interrupt */
+#endif
+
+#define IRQ_HWUART      PXA_IRQ(7)      /* HWUART Transmit/Receive/Error (PXA26x) */
+#define IRQ_OST_4_11    PXA_IRQ(7)      /* OS timer 4-11 matches (PXA27x) */
+#define IRQ_GPIO0       PXA_IRQ(8)      /* GPIO0 Edge Detect */
+#define IRQ_GPIO1       PXA_IRQ(9)      /* GPIO1 Edge Detect */
+#define IRQ_GPIO_2_x    PXA_IRQ(10)     /* GPIO[2-x] Edge Detect */
+#define IRQ_USB         PXA_IRQ(11)     /* USB Service */
+#define IRQ_PMU         PXA_IRQ(12)     /* Performance Monitoring Unit */
+#define IRQ_I2S         PXA_IRQ(13)     /* I2S Interrupt */
+#define IRQ_AC97        PXA_IRQ(14)     /* AC97 Interrupt */
+#define IRQ_ASSP        PXA_IRQ(15)     /* Audio SSP Service Request (PXA25x) */
+#define IRQ_USIM        PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
+#define IRQ_NSSP        PXA_IRQ(16)     /* Network SSP Service Request (PXA25x) */
+#define IRQ_SSP2        PXA_IRQ(16)     /* SSP2 interrupt (PXA27x) */
+#define IRQ_LCD         PXA_IRQ(17)     /* LCD Controller Service Request */
+#define IRQ_I2C         PXA_IRQ(18)     /* I2C Service Request */
+#define IRQ_ICP         PXA_IRQ(19)     /* ICP Transmit/Receive/Error */
+#define IRQ_STUART      PXA_IRQ(20)     /* STUART Transmit/Receive/Error */
+#define IRQ_BTUART      PXA_IRQ(21)     /* BTUART Transmit/Receive/Error */
+#define IRQ_FFUART      PXA_IRQ(22)     /* FFUART Transmit/Receive/Error*/
+#define IRQ_MMC         PXA_IRQ(23)     /* MMC Status/Error Detection */
+#define IRQ_SSP         PXA_IRQ(24)     /* SSP Service Request */
+#define IRQ_DMA         PXA_IRQ(25)     /* DMA Channel Service Request */
+#define IRQ_OST0        PXA_IRQ(26)     /* OS Timer match 0 */
+#define IRQ_OST1        PXA_IRQ(27)     /* OS Timer match 1 */
+#define IRQ_OST2        PXA_IRQ(28)     /* OS Timer match 2 */
+#define IRQ_OST3        PXA_IRQ(29)     /* OS Timer match 3 */
+#define IRQ_RTC1Hz      PXA_IRQ(30)     /* RTC HZ Clock Tick */
+#define IRQ_RTCAlrm     PXA_IRQ(31)     /* RTC Alarm */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_TPM         PXA_IRQ(32)     /* TPM interrupt */
+#define IRQ_CAMERA      PXA_IRQ(33)     /* Camera Interface */
+#endif
+
+#ifdef CONFIG_PXA3xx
+#define IRQ_SSP4        PXA_IRQ(13)     /* SSP4 service request */
+#define IRQ_CIR         PXA_IRQ(34)     /* Consumer IR */
+#define IRQ_TSI         PXA_IRQ(36)     /* Touch Screen Interface (PXA320) */
+#define IRQ_USIM2       PXA_IRQ(38)     /* USIM2 Controller */
+#define IRQ_GRPHICS     PXA_IRQ(39)     /* Graphics Controller */
+#define IRQ_MMC2        PXA_IRQ(41)     /* MMC2 Controller */
+#define IRQ_1WIRE       PXA_IRQ(44)     /* 1-Wire Controller */
+#define IRQ_NAND        PXA_IRQ(45)     /* NAND Controller */
+#define IRQ_USB2        PXA_IRQ(46)     /* USB 2.0 Device Controller */
+#define IRQ_WAKEUP0     PXA_IRQ(49)     /* EXT_WAKEUP0 */
+#define IRQ_WAKEUP1     PXA_IRQ(50)     /* EXT_WAKEUP1 */
+#define IRQ_DMEMC       PXA_IRQ(51)     /* Dynamic Memory Controller */
+#define IRQ_MMC3        PXA_IRQ(55)     /* MMC3 Controller (PXA310) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE       (64)
+#define PXA_GPIO_IRQ_NUM        (128)
+
+#define GPIO_2_x_TO_IRQ(x)      (PXA_GPIO_IRQ_BASE + (x))
+#define IRQ_GPIO(x)     (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+
+#define IRQ_TO_GPIO_2_x(i)      ((i) - PXA_GPIO_IRQ_BASE)
+#define IRQ_TO_GPIO(i)  (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.
+ */
+#define IRQ_BOARD_START         (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+#define IRQ_BOARD_END           (IRQ_BOARD_START + 16)
+
+#define IRQ_SA1111_START        (IRQ_BOARD_END)
+#define IRQ_GPAIN0              (IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1              (IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2              (IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3              (IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0              (IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1              (IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2              (IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3              (IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4              (IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5              (IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0              (IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1              (IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2              (IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3              (IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4              (IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5              (IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6              (IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7              (IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT             (IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT             (IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT        (IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT             (IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT             (IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT        (IRQ_BOARD_END + 23)
+#define SSPXMTINT               (IRQ_BOARD_END + 24)
+#define SSPRCVINT               (IRQ_BOARD_END + 25)
+#define SSPROR                  (IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA          (IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA          (IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB          (IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB          (IRQ_BOARD_END + 35)
+#define AUDTFSR                 (IRQ_BOARD_END + 36)
+#define AUDRFSR                 (IRQ_BOARD_END + 37)
+#define AUDTUR                  (IRQ_BOARD_END + 38)
+#define AUDROR                  (IRQ_BOARD_END + 39)
+#define AUDDTS                  (IRQ_BOARD_END + 40)
+#define AUDRDD                  (IRQ_BOARD_END + 41)
+#define AUDSTO                  (IRQ_BOARD_END + 42)
+#define IRQ_USBPWR              (IRQ_BOARD_END + 43)
+#define IRQ_HCIM                (IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC          (IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP           (IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR           (IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME     (IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT       (IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT       (IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID         (IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID         (IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG      (IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG      (IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START        (IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY          (IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0        (IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1        (IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2        (IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3        (IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4        (IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5        (IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6        (IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7        (IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8        (IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9        (IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10       (IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11       (IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12       (IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13       (IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14       (IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15       (IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT           (IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR      (IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW      (IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_OVRN     (IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND     (IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS                 (IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS                 (IRQ_LOCOMO_SPI_TEND + 1)
+#elif defined(CONFIG_ARCH_LUBBOCK) || \
+      defined(CONFIG_MACH_LOGICPD_PXA270) || \
+      defined(CONFIG_MACH_TOSA) || \
+      defined(CONFIG_MACH_MAINSTONE) || \
+      defined(CONFIG_MACH_PCM027) || \
+      defined(CONFIG_MACH_MAGICIAN)
+#define NR_IRQS                 (IRQ_BOARD_END)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define NR_IRQS                 (IRQ_BOARD_START + 32)
+#else
+#define NR_IRQS                 (IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs.  Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define LUBBOCK_IRQ(x)          (IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ          LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ      LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ         LUBBOCK_IRQ(2)  /* usb connect */
+#define LUBBOCK_ETH_IRQ         LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ     LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ          LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ    LUBBOCK_IRQ(6)  /* usb disconnect */
+#define LUBBOCK_LAST_IRQ        LUBBOCK_IRQ(6)
+
+#define LPD270_IRQ(x)           (IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ         LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ     LPD270_IRQ(3)
+#define LPD270_AC97_IRQ         LPD270_IRQ(4)
+
+#define MAINSTONE_IRQ(x)        (IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ       MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ      MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ      MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ  MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ      MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ       MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ     MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ     MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ     MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ        MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ     MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ        MAINSTONE_IRQ(15)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE     (IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE    (IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE      (IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE     (IRQ_BOARD_START + 3)
+
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
+
+/* ITE8152 irqs */
+/* add IT8152 IRQs beyond BOARD_END */
+#ifdef CONFIG_PCI_HOST_ITE8152
+#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT     9
+#define IT8152_LP_IRQ_COUNT     16
+#define IT8152_PD_IRQ_COUNT     15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
+#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+
+#if NR_IRQS < (IT8152_LAST_IRQ+1)
+#undef NR_IRQS
+#define NR_IRQS (IT8152_LAST_IRQ+1)
+#endif
+
+#endif /* CONFIG_PCI_HOST_ITE8152 */
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
new file mode 100644
index 000000000000..79d209b826f4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_ZYLONITE_H
+#define __ASM_ARCH_ZYLONITE_H
+
+#define LITTLETON_ETH_PHYS      0x30000000
+
+#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
new file mode 100644
index 000000000000..f89fb715266b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-pxa/include/mach/lpd270.h
+ *
+ * Author:      Lennert Buytenhek
+ * Created:     Feb 10, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_LPD270_H
+#define __ASM_ARCH_LPD270_H
+
+#define LPD270_CPLD_PHYS        PXA_CS2_PHYS
+#define LPD270_CPLD_VIRT        0xf0000000
+#define LPD270_CPLD_SIZE        0x00100000
+
+#define LPD270_ETH_PHYS         (PXA_CS2_PHYS + 0x01000000)
+
+/* CPLD registers  */
+#define LPD270_CPLD_REG(x)      ((unsigned long)(LPD270_CPLD_VIRT + (x)))
+#define LPD270_CONTROL          LPD270_CPLD_REG(0x00)
+#define LPD270_PERIPHERAL0      LPD270_CPLD_REG(0x04)
+#define LPD270_PERIPHERAL1      LPD270_CPLD_REG(0x08)
+#define LPD270_CPLD_REVISION    LPD270_CPLD_REG(0x14)
+#define LPD270_EEPROM_SPI_ITF   LPD270_CPLD_REG(0x20)
+#define LPD270_MODE_PINS        LPD270_CPLD_REG(0x24)
+#define LPD270_EGPIO            LPD270_CPLD_REG(0x30)
+#define LPD270_INT_MASK         LPD270_CPLD_REG(0x40)
+#define LPD270_INT_STATUS       LPD270_CPLD_REG(0x50)
+
+#define LPD270_INT_AC97         (1 << 4)  /* AC'97 CODEC IRQ */
+#define LPD270_INT_ETHERNET     (1 << 3)  /* Ethernet controller IRQ */
+#define LPD270_INT_USBC         (1 << 2)  /* USB client cable detection IRQ */
+
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
new file mode 100644
index 000000000000..4cb24154a5a8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/lubbock.h
+ *
+ *  Author:     Nicolas Pitre
+ *  Created:    Jun 15, 2001
+ *  Copyright:  MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define LUBBOCK_ETH_PHYS        PXA_CS3_PHYS
+
+#define LUBBOCK_FPGA_PHYS       PXA_CS2_PHYS
+#define LUBBOCK_FPGA_VIRT       (0xf0000000)
+#define LUB_P2V(x)              ((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
+#define LUB_V2P(x)              ((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __LUB_REG(x)          (*((volatile unsigned long *)LUB_P2V(x)))
+#else
+#  define __LUB_REG(x)          LUB_P2V(x)
+#endif
+
+/* FPGA register virtual addresses */
+#define LUB_WHOAMI              __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
+#define LUB_HEXLED              __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
+#define LUB_DISC_BLNK_LED       __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
+#define LUB_CONF_SWITCHES       __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
+#define LUB_USER_SWITCHES       __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
+#define LUB_MISC_WR             __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+#define LUB_MISC_RD             __LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
+#define LUB_IRQ_MASK_EN         __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
+#define LUB_IRQ_SET_CLR         __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
+#define LUB_GP                  __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
+
+#ifndef __ASSEMBLY__
+extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
new file mode 100644
index 000000000000..38d68d99f585
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -0,0 +1,117 @@
+/*
+ * GPIO and IRQ definitions for HTC Magician PDA phones
+ *
+ * Copyright (c) 2007 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MAGICIAN_H_
+#define _MAGICIAN_H_
+
+#include <mach/irqs.h>
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_MAGICIAN_KEY_POWER                0
+#define GPIO9_MAGICIAN_UNKNOWN                  9
+#define GPIO10_MAGICIAN_GSM_IRQ                 10
+#define GPIO11_MAGICIAN_GSM_OUT1                11
+#define GPIO13_MAGICIAN_CPLD_IRQ                13
+#define GPIO18_MAGICIAN_UNKNOWN                 18
+#define GPIO22_MAGICIAN_VIBRA_EN                22
+#define GPIO26_MAGICIAN_GSM_POWER               26
+#define GPIO27_MAGICIAN_USBC_PUEN               27
+#define GPIO30_MAGICIAN_nCHARGE_EN              30
+#define GPIO37_MAGICIAN_KEY_HANGUP              37
+#define GPIO38_MAGICIAN_KEY_CONTACTS            38
+#define GPIO40_MAGICIAN_GSM_OUT2                40
+#define GPIO48_MAGICIAN_UNKNOWN                 48
+#define GPIO56_MAGICIAN_UNKNOWN                 56
+#define GPIO57_MAGICIAN_CAM_RESET               57
+#define GPIO75_MAGICIAN_SAMSUNG_POWER           75
+#define GPIO83_MAGICIAN_nIR_EN                  83
+#define GPIO86_MAGICIAN_GSM_RESET               86
+#define GPIO87_MAGICIAN_GSM_SELECT              87
+#define GPIO90_MAGICIAN_KEY_CALENDAR            90
+#define GPIO91_MAGICIAN_KEY_CAMERA              91
+#define GPIO93_MAGICIAN_KEY_UP                  93
+#define GPIO94_MAGICIAN_KEY_DOWN                94
+#define GPIO95_MAGICIAN_KEY_LEFT                95
+#define GPIO96_MAGICIAN_KEY_RIGHT               96
+#define GPIO97_MAGICIAN_KEY_ENTER               97
+#define GPIO98_MAGICIAN_KEY_RECORD              98
+#define GPIO99_MAGICIAN_HEADPHONE_IN            99
+#define GPIO100_MAGICIAN_KEY_VOL_UP             100
+#define GPIO101_MAGICIAN_KEY_VOL_DOWN           101
+#define GPIO102_MAGICIAN_KEY_PHONE              102
+#define GPIO103_MAGICIAN_LED_KP                 103
+#define GPIO104_MAGICIAN_LCD_POWER_1            104
+#define GPIO105_MAGICIAN_LCD_POWER_2            105
+#define GPIO106_MAGICIAN_LCD_POWER_3            106
+#define GPIO107_MAGICIAN_DS1WM_IRQ              107
+#define GPIO108_MAGICIAN_GSM_READY              108
+#define GPIO114_MAGICIAN_UNKNOWN                114
+#define GPIO115_MAGICIAN_nPEN_IRQ               115
+#define GPIO116_MAGICIAN_nCAM_EN                116
+#define GPIO119_MAGICIAN_UNKNOWN                119
+#define GPIO120_MAGICIAN_UNKNOWN                120
+
+/*
+ * CPLD IRQs
+ */
+
+#define IRQ_MAGICIAN_SD         (IRQ_BOARD_START + 0)
+#define IRQ_MAGICIAN_EP         (IRQ_BOARD_START + 1)
+#define IRQ_MAGICIAN_BT         (IRQ_BOARD_START + 2)
+#define IRQ_MAGICIAN_AC         (IRQ_BOARD_START + 3)
+
+/*
+ * CPLD EGPIOs
+ */
+
+#define MAGICIAN_EGPIO_BASE                     0x80 /* GPIO_BOARD_START */
+#define MAGICIAN_EGPIO(reg,bit) \
+        (MAGICIAN_EGPIO_BASE + 8*reg + bit)
+
+/* output */
+
+#define EGPIO_MAGICIAN_TOPPOLY_POWER            MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER                MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET                MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER                MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER                MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER                 MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0                  MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1                  MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER                MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET              MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER              MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER                 MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER                 MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC               MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL      MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP                MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2                MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_CHARGE_EN                MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_GSM_POWER                MAGICIAN_EGPIO(2, 7)
+
+/* input */
+
+#define EGPIO_MAGICIAN_CABLE_STATE_AC           MAGICIAN_EGPIO(4, 0)
+#define EGPIO_MAGICIAN_CABLE_STATE_USB          MAGICIAN_EGPIO(4, 1)
+
+#define EGPIO_MAGICIAN_BOARD_ID0                MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1                MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2                MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT               MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY             MAGICIAN_EGPIO(5, 4)
+
+#define EGPIO_MAGICIAN_EP_INSERT                MAGICIAN_EGPIO(6, 1)
+
+#endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
new file mode 100644
index 000000000000..3461c4302ff4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -0,0 +1,120 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/mainstone.h
+ *
+ *  Author:     Nicolas Pitre
+ *  Created:    Nov 14, 2002
+ *  Copyright:  MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_MAINSTONE_H
+#define ASM_ARCH_MAINSTONE_H
+
+#define MST_ETH_PHYS            PXA_CS4_PHYS
+
+#define MST_FPGA_PHYS           PXA_CS2_PHYS
+#define MST_FPGA_VIRT           (0xf0000000)
+#define MST_P2V(x)              ((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
+#define MST_V2P(x)              ((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __MST_REG(x)           (*((volatile unsigned long *)MST_P2V(x)))
+#else
+# define __MST_REG(x)           MST_P2V(x)
+#endif
+
+/* board level registers in the FPGA */
+
+#define MST_LEDDAT1             __MST_REG(0x08000010)
+#define MST_LEDDAT2             __MST_REG(0x08000014)
+#define MST_LEDCTRL             __MST_REG(0x08000040)
+#define MST_GPSWR               __MST_REG(0x08000060)
+#define MST_MSCWR1              __MST_REG(0x08000080)
+#define MST_MSCWR2              __MST_REG(0x08000084)
+#define MST_MSCWR3              __MST_REG(0x08000088)
+#define MST_MSCRD               __MST_REG(0x08000090)
+#define MST_INTMSKENA           __MST_REG(0x080000c0)
+#define MST_INTSETCLR           __MST_REG(0x080000d0)
+#define MST_PCMCIA0             __MST_REG(0x080000e0)
+#define MST_PCMCIA1             __MST_REG(0x080000e4)
+
+#define MST_MSCWR1_CAMERA_ON    (1 << 15)  /* Camera interface power control */
+#define MST_MSCWR1_CAMERA_SEL   (1 << 14)  /* Camera interface mux control */
+#define MST_MSCWR1_LCD_CTL      (1 << 13)  /* General-purpose LCD control */
+#define MST_MSCWR1_MS_ON        (1 << 12)  /* Memory Stick power control */
+#define MST_MSCWR1_MMC_ON       (1 << 11)  /* MultiMediaCard* power control */
+#define MST_MSCWR1_MS_SEL       (1 << 10)  /* SD/MS multiplexer control */
+#define MST_MSCWR1_BB_SEL       (1 << 9)   /* PCMCIA/Baseband multiplexer */
+#define MST_MSCWR1_BT_ON        (1 << 8)   /* Bluetooth UART transceiver */
+#define MST_MSCWR1_BTDTR        (1 << 7)   /* Bluetooth UART DTR */
+
+#define MST_MSCWR1_IRDA_MASK    (3 << 5)   /* IrDA transceiver mode */
+#define MST_MSCWR1_IRDA_FULL    (0 << 5)   /* full distance power */
+#define MST_MSCWR1_IRDA_OFF     (1 << 5)   /* shutdown */
+#define MST_MSCWR1_IRDA_MED     (2 << 5)   /* 2/3 distance power */
+#define MST_MSCWR1_IRDA_LOW     (3 << 5)   /* 1/3 distance power */
+
+#define MST_MSCWR1_IRDA_FIR     (1 << 4)   /* IrDA transceiver SIR/FIR */
+#define MST_MSCWR1_GREENLED     (1 << 3)   /* LED D1 control */
+#define MST_MSCWR1_PDC_CTL      (1 << 2)   /* reserved */
+#define MST_MSCWR1_MTR_ON       (1 << 1)   /* Silent alert motor */
+#define MST_MSCWR1_SYSRESET     (1 << 0)   /* System reset */
+
+#define MST_MSCWR2_USB_OTG_RST  (1 << 6)   /* USB On The Go reset */
+#define MST_MSCWR2_USB_OTG_SEL  (1 << 5)   /* USB On The Go control */
+#define MST_MSCWR2_nUSBC_SC     (1 << 4)   /* USB client soft connect control */
+#define MST_MSCWR2_I2S_SPKROFF  (1 << 3)   /* I2S CODEC amplifier control */
+#define MST_MSCWR2_AC97_SPKROFF (1 << 2)   /* AC97 CODEC amplifier control */
+#define MST_MSCWR2_RADIO_PWR    (1 << 1)   /* Radio module power control */
+#define MST_MSCWR2_RADIO_WAKE   (1 << 0)   /* Radio module wake-up signal */
+
+#define MST_MSCWR3_GPIO_RESET_EN        (1 << 2) /* Enable GPIO Reset */
+#define MST_MSCWR3_GPIO_RESET           (1 << 1) /* Initiate a GPIO Reset */
+#define MST_MSCWR3_COMMS_SW_RESET       (1 << 0) /* Communications Processor Reset Control */
+
+#define MST_MSCRD_nPENIRQ       (1 << 9)   /* ADI7873* nPENIRQ signal */
+#define MST_MSCRD_nMEMSTK_CD    (1 << 8)   /* Memory Stick detection signal */
+#define MST_MSCRD_nMMC_CD       (1 << 7)   /* SD/MMC card detection signal */
+#define MST_MSCRD_nUSIM_CD      (1 << 6)   /* USIM card detection signal */
+#define MST_MSCRD_USB_CBL       (1 << 5)   /* USB client cable status */
+#define MST_MSCRD_TS_BUSY       (1 << 4)   /* ADI7873 busy */
+#define MST_MSCRD_BTDSR         (1 << 3)   /* Bluetooth UART DSR */
+#define MST_MSCRD_BTRI          (1 << 2)   /* Bluetooth UART Ring Indicator */
+#define MST_MSCRD_BTDCD         (1 << 1)   /* Bluetooth UART DCD */
+#define MST_MSCRD_nMMC_WP       (1 << 0)   /* SD/MMC write-protect status */
+
+#define MST_INT_S1_IRQ          (1 << 15)  /* PCMCIA socket 1 IRQ */
+#define MST_INT_S1_STSCHG       (1 << 14)  /* PCMCIA socket 1 status changed */
+#define MST_INT_S1_CD           (1 << 13)  /* PCMCIA socket 1 card detection */
+#define MST_INT_S0_IRQ          (1 << 11)  /* PCMCIA socket 0 IRQ */
+#define MST_INT_S0_STSCHG       (1 << 10)  /* PCMCIA socket 0 status changed */
+#define MST_INT_S0_CD           (1 << 9)   /* PCMCIA socket 0 card detection */
+#define MST_INT_nEXBRD_INT      (1 << 7)   /* Expansion board IRQ */
+#define MST_INT_MSINS           (1 << 6)   /* Memory Stick* detection */
+#define MST_INT_PENIRQ          (1 << 5)   /* ADI7873* touch-screen IRQ */
+#define MST_INT_AC97            (1 << 4)   /* AC'97 CODEC IRQ */
+#define MST_INT_ETHERNET        (1 << 3)   /* Ethernet controller IRQ */
+#define MST_INT_USBC            (1 << 2)   /* USB client cable detection IRQ */
+#define MST_INT_USIM            (1 << 1)   /* USIM card detection IRQ */
+#define MST_INT_MMC             (1 << 0)   /* MMC/SD card detection IRQ */
+
+#define MST_PCMCIA_nIRQ         (1 << 10)  /* IRQ / ready signal */
+#define MST_PCMCIA_nSPKR_BVD2   (1 << 9)   /* VDD sense / digital speaker */
+#define MST_PCMCIA_nSTSCHG_BVD1 (1 << 8)   /* VDD sense / card status changed */
+#define MST_PCMCIA_nVS2         (1 << 7)   /* VSS voltage sense */
+#define MST_PCMCIA_nVS1         (1 << 6)   /* VSS voltage sense */
+#define MST_PCMCIA_nCD          (1 << 5)   /* Card detection signal */
+#define MST_PCMCIA_RESET        (1 << 4)   /* Card reset signal */
+#define MST_PCMCIA_PWR_MASK     (0x000f)   /* MAX1602 power-supply controls */
+
+#define MST_PCMCIA_PWR_VPP_0    0x0        /* voltage VPP = 0V */
+#define MST_PCMCIA_PWR_VPP_120  0x2        /* voltage VPP = 12V*/
+#define MST_PCMCIA_PWR_VPP_VCC  0x1        /* voltage VPP = VCC */
+#define MST_PCMCIA_PWR_VCC_0    0x0        /* voltage VCC = 0V */
+#define MST_PCMCIA_PWR_VCC_33   0x8        /* voltage VCC = 3.3V */
+#define MST_PCMCIA_PWR_VCC_50   0x4        /* voltage VCC = 5.0V */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
new file mode 100644
index 000000000000..552eb7fa6579
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/memory.h
+ *
+ * Author:      Nicolas Pitre
+ * Copyright:   (C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     UL(0xa0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)         __virt_to_phys(x)
+#define __bus_to_virt(x)         __phys_to_virt(x)
+
+/*
+ * The nodes are matched with the physical SDRAM banks as follows:
+ *
+ *      node 0:  0xa0000000-0xa3ffffff  -->  0xc0000000-0xc3ffffff
+ *      node 1:  0xa4000000-0xa7ffffff  -->  0xc4000000-0xc7ffffff
+ *      node 2:  0xa8000000-0xabffffff  -->  0xc8000000-0xcbffffff
+ *      node 3:  0xac000000-0xafffffff  -->  0xcc000000-0xcfffffff
+ *
+ * This needs a node mem size of 26 bits.
+ */
+#define NODE_MEM_SIZE_BITS      26
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+void cmx270_pci_adjust_zones(int node, unsigned long *size,
+                             unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+        cmx270_pci_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD       (PHYS_OFFSET + SZ_64M - 1)
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
new file mode 100644
index 000000000000..6c8e72238bfd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -0,0 +1,161 @@
+#ifndef __ASM_ARCH_MFP_PXA25X_H
+#define __ASM_ARCH_MFP_PXA25X_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO2_GPIO              MFP_CFG_IN(GPIO2, AF0)
+#define GPIO3_GPIO              MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO              MFP_CFG_IN(GPIO4, AF0)
+#define GPIO5_GPIO              MFP_CFG_IN(GPIO5, AF0)
+#define GPIO6_GPIO              MFP_CFG_IN(GPIO6, AF0)
+#define GPIO7_GPIO              MFP_CFG_IN(GPIO7, AF0)
+#define GPIO8_GPIO              MFP_CFG_IN(GPIO8, AF0)
+
+#define GPIO1_RST               MFP_CFG_IN(GPIO1, AF1)
+
+/* Crystal and Clock Signals */
+#define GPIO10_RTCCLK           MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO70_RTC_CLK          MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
+#define GPIO7_48MHz             MFP_CFG_OUT(GPIO7,  AF1, DRIVE_LOW)
+#define GPIO11_3_6MHz           MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO71_3_6MHz           MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
+#define GPIO12_32KHz            MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+#define GPIO72_32kHz            MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO15_nCS_1            MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2            MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3            MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4            MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5            MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO18_RDY              MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0           MFP_CFG_IN(GPIO20, AF1)
+#define GPIO19_DREQ_1           MFP_CFG_IN(GPIO19, AF1)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO13_MBGNT            MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
+#define GPIO73_MBGNT            MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
+#define GPIO14_MBREQ            MFP_CFG_IN(GPIO14, AF1)
+#define GPIO66_MBREQ            MFP_CFG_IN(GPIO66, AF1)
+
+/* PC CARD */
+#define GPIO52_nPCE_1           MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
+#define GPIO53_nPCE_2           MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
+#define GPIO55_nPREG            MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR            MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW            MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE             MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE             MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16          MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT           MFP_CFG_IN(GPIO56, AF1)
+#define GPIO54_nPSKTSEL         MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+
+/* FFUART */
+#define GPIO34_FFUART_RXD       MFP_CFG_IN(GPIO34, AF1)
+#define GPIO35_FFUART_CTS       MFP_CFG_IN(GPIO35, AF1)
+#define GPIO36_FFUART_DCD       MFP_CFG_IN(GPIO36, AF1)
+#define GPIO37_FFUART_DSR       MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI        MFP_CFG_IN(GPIO38, AF1)
+#define GPIO39_FFUART_TXD       MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR       MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS       MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO42_BTUART_RXD       MFP_CFG_IN(GPIO42, AF1)
+#define GPIO43_BTUART_TXD       MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+#define GPIO44_BTUART_CTS       MFP_CFG_IN(GPIO44, AF1)
+#define GPIO45_BTUART_RTS       MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD       MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD       MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* HWUART */
+#define GPIO42_HWUART_RXD       MFP_CFG_IN(GPIO42, AF3)
+#define GPIO43_HWUART_TXD       MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
+#define GPIO44_HWUART_CTS       MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_HWUART_RTS       MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
+#define GPIO48_HWUART_TXD       MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
+#define GPIO49_HWUART_RXD       MFP_CFG_IN(GPIO49, AF1)
+#define GPIO50_HWUART_CTS       MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_HWUART_RTS       MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO46_FICP_RXD         MFP_CFG_IN(GPIO46, AF1)
+#define GPIO47_FICP_TXD         MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1 */
+#define GPIO16_PWM0_OUT         MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT         MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO28_AC97_BITCLK      MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0  MFP_CFG_IN(GPIO29, AF1)
+#define GPIO30_AC97_SDATA_OUT   MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO31_AC97_SYNC        MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO32_AC97_SDATA_IN_1  MFP_CFG_IN(GPIO32, AF1)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN    MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT   MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN     MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT    MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC         MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO32_I2S_SYSCLK       MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK        MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM        MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
+#define GPIO25_SSP1_TXD         MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO26_SSP1_RXD         MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_EXTCLK      MFP_CFG_IN(GPIO27, AF1)
+
+/* SSP 2 - NSSP */
+#define GPIO81_SSP2_CLK_OUT     MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO81_SSP2_CLK_IN      MFP_CFG_IN(GPIO81, AF1)
+#define GPIO82_SSP2_FRM_OUT     MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
+#define GPIO82_SSP2_FRM_IN      MFP_CFG_IN(GPIO82, AF1)
+#define GPIO83_SSP2_TXD         MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
+#define GPIO83_SSP2_RXD         MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_SSP2_TXD         MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
+#define GPIO84_SSP2_RXD         MFP_CFG_IN(GPIO84, AF2)
+
+/* MMC */
+#define GPIO6_MMC_CLK           MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
+#define GPIO8_MMC_CS0           MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
+#define GPIO9_MMC_CS1           MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
+#define GPIO34_MMC_CS0          MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
+#define GPIO39_MMC_CS1          MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO53_MMC_CLK          MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_MMC_CLK          MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
+#define GPIO69_MMC_CLK          MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
+#define GPIO67_MMC_CS0          MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
+#define GPIO68_MMC_CS1          MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0        MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1        MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2        MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3        MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4        MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5        MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6        MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7        MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8        MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9        MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10       MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11       MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12       MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13       MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14       MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15       MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK         MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK         MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK         MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_ACBIAS       MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+
+#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
new file mode 100644
index 000000000000..122bdbd53182
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -0,0 +1,433 @@
+#ifndef __ASM_ARCH_MFP_PXA27X_H
+#define __ASM_ARCH_MFP_PXA27X_H
+
+/*
+ * NOTE:  for those special-function bidirectional GPIOs, as described
+ * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
+ * alternative is preserved, the direction is actually selected by the
+ * specific controller, and this should work in most cases.
+ */
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO85_GPIO             MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO             MFP_CFG_IN(GPIO86, AF0)
+#define GPIO87_GPIO             MFP_CFG_IN(GPIO87, AF0)
+#define GPIO88_GPIO             MFP_CFG_IN(GPIO88, AF0)
+#define GPIO89_GPIO             MFP_CFG_IN(GPIO89, AF0)
+#define GPIO90_GPIO             MFP_CFG_IN(GPIO90, AF0)
+#define GPIO91_GPIO             MFP_CFG_IN(GPIO91, AF0)
+#define GPIO92_GPIO             MFP_CFG_IN(GPIO92, AF0)
+#define GPIO93_GPIO             MFP_CFG_IN(GPIO93, AF0)
+#define GPIO94_GPIO             MFP_CFG_IN(GPIO94, AF0)
+#define GPIO95_GPIO             MFP_CFG_IN(GPIO95, AF0)
+#define GPIO96_GPIO             MFP_CFG_IN(GPIO96, AF0)
+#define GPIO97_GPIO             MFP_CFG_IN(GPIO97, AF0)
+#define GPIO98_GPIO             MFP_CFG_IN(GPIO98, AF0)
+#define GPIO99_GPIO             MFP_CFG_IN(GPIO99, AF0)
+#define GPIO100_GPIO            MFP_CFG_IN(GPIO100, AF0)
+#define GPIO101_GPIO            MFP_CFG_IN(GPIO101, AF0)
+#define GPIO102_GPIO            MFP_CFG_IN(GPIO102, AF0)
+#define GPIO103_GPIO            MFP_CFG_IN(GPIO103, AF0)
+#define GPIO104_GPIO            MFP_CFG_IN(GPIO104, AF0)
+#define GPIO105_GPIO            MFP_CFG_IN(GPIO105, AF0)
+#define GPIO106_GPIO            MFP_CFG_IN(GPIO106, AF0)
+#define GPIO107_GPIO            MFP_CFG_IN(GPIO107, AF0)
+#define GPIO108_GPIO            MFP_CFG_IN(GPIO108, AF0)
+#define GPIO109_GPIO            MFP_CFG_IN(GPIO109, AF0)
+#define GPIO110_GPIO            MFP_CFG_IN(GPIO110, AF0)
+#define GPIO111_GPIO            MFP_CFG_IN(GPIO111, AF0)
+#define GPIO112_GPIO            MFP_CFG_IN(GPIO112, AF0)
+#define GPIO113_GPIO            MFP_CFG_IN(GPIO113, AF0)
+#define GPIO114_GPIO            MFP_CFG_IN(GPIO114, AF0)
+#define GPIO115_GPIO            MFP_CFG_IN(GPIO115, AF0)
+#define GPIO116_GPIO            MFP_CFG_IN(GPIO116, AF0)
+#define GPIO117_GPIO            MFP_CFG_IN(GPIO117, AF0)
+#define GPIO118_GPIO            MFP_CFG_IN(GPIO118, AF0)
+#define GPIO119_GPIO            MFP_CFG_IN(GPIO119, AF0)
+#define GPIO120_GPIO            MFP_CFG_IN(GPIO120, AF0)
+
+/* Crystal and Clock Signals */
+#define GPIO9_HZ_CLK            MFP_CFG_OUT(GPIO9,  AF1, DRIVE_LOW)
+#define GPIO10_HZ_CLK           MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO11_48_MHz           MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
+#define GPIO12_48_MHz           MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
+#define GPIO13_CLK_EXT          MFP_CFG_IN(GPIO13, AF1)
+
+/* OS Timer Signals */
+#define GPIO11_EXT_SYNC_0       MFP_CFG_IN(GPIO11, AF1)
+#define GPIO12_EXT_SYNC_1       MFP_CFG_IN(GPIO12, AF1)
+#define GPIO9_CHOUT_0           MFP_CFG_OUT(GPIO9,  AF3, DRIVE_LOW)
+#define GPIO10_CHOUT_1          MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
+#define GPIO11_CHOUT_0          MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO12_CHOUT_1          MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO20_nSDCS_2          MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
+#define GPIO21_nSDCS_3          MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
+#define GPIO15_nCS_1            MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2            MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3            MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4            MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5            MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO21_DVAL_0           MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
+#define GPIO116_DVAL_0          MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
+#define GPIO33_DVAL_1           MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
+#define GPIO96_DVAL_1           MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
+#define GPIO18_RDY              MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0           MFP_CFG_IN(GPIO20, AF1)
+#define GPIO115_DREQ_0          MFP_CFG_IN(GPIO115, AF1)
+#define GPIO80_DREQ_1           MFP_CFG_IN(GPIO80, AF1)
+#define GPIO97_DREQ_1           MFP_CFG_IN(GPIO97, AF2)
+#define GPIO85_DREQ_2           MFP_CFG_IN(GPIO85, AF2)
+#define GPIO100_DREQ_2          MFP_CFG_IN(GPIO100, AF2)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO20_MBREQ            MFP_CFG_IN(GPIO20, AF2)
+#define GPIO80_MBREQ            MFP_CFG_IN(GPIO80, AF2)
+#define GPIO96_MBREQ            MFP_CFG_IN(GPIO96, AF2)
+#define GPIO115_MBREQ           MFP_CFG_IN(GPIO115, AF3)
+#define GPIO21_MBGNT            MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
+#define GPIO33_MBGNT            MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
+#define GPIO97_MBGNT            MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
+#define GPIO116_MBGNT           MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
+
+/* PC CARD */
+#define GPIO15_nPCE_1           MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO85_nPCE_1           MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
+#define GPIO86_nPCE_1           MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
+#define GPIO102_nPCE_1          MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
+#define GPIO54_nPCE_2           MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+#define GPIO78_nPCE_2           MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
+#define GPIO87_nPCE_2           MFP_CFG_IN(GPIO87, AF1)
+#define GPIO55_nPREG            MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR            MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW            MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE             MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE             MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16          MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT           MFP_CFG_IN(GPIO56, AF1)
+#define GPIO79_PSKTSEL          MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL         MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
+
+/* I2C */
+#define GPIO117_I2C_SCL         MFP_CFG_IN(GPIO117, AF1)
+#define GPIO118_I2C_SDA         MFP_CFG_IN(GPIO118, AF1)
+
+/* FFUART */
+#define GPIO9_FFUART_CTS        MFP_CFG_IN(GPIO9, AF3)
+#define GPIO26_FFUART_CTS       MFP_CFG_IN(GPIO26, AF3)
+#define GPIO35_FFUART_CTS       MFP_CFG_IN(GPIO35, AF1)
+#define GPIO100_FFUART_CTS      MFP_CFG_IN(GPIO100, AF3)
+#define GPIO10_FFUART_DCD       MFP_CFG_IN(GPIO10, AF1)
+#define GPIO36_FFUART_DCD       MFP_CFG_IN(GPIO36, AF1)
+#define GPIO33_FFUART_DSR       MFP_CFG_IN(GPIO33, AF2)
+#define GPIO37_FFUART_DSR       MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI        MFP_CFG_IN(GPIO38, AF1)
+#define GPIO89_FFUART_RI        MFP_CFG_IN(GPIO89, AF3)
+#define GPIO19_FFUART_RXD       MFP_CFG_IN(GPIO19, AF3)
+#define GPIO33_FFUART_RXD       MFP_CFG_IN(GPIO33, AF1)
+#define GPIO34_FFUART_RXD       MFP_CFG_IN(GPIO34, AF1)
+#define GPIO41_FFUART_RXD       MFP_CFG_IN(GPIO41, AF1)
+#define GPIO53_FFUART_RXD       MFP_CFG_IN(GPIO53, AF1)
+#define GPIO85_FFUART_RXD       MFP_CFG_IN(GPIO85, AF1)
+#define GPIO96_FFUART_RXD       MFP_CFG_IN(GPIO96, AF3)
+#define GPIO102_FFUART_RXD      MFP_CFG_IN(GPIO102, AF3)
+#define GPIO16_FFUART_TXD       MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
+#define GPIO37_FFUART_TXD       MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
+#define GPIO39_FFUART_TXD       MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_TXD       MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO99_FFUART_TXD       MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
+#define GPIO27_FFUART_RTS       MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS       MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_RTS       MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
+#define GPIO98_FFUART_RTS       MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR       MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO82_FFUART_DTR       MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO44_BTUART_CTS       MFP_CFG_IN(GPIO44, AF1)
+#define GPIO42_BTUART_RXD       MFP_CFG_IN(GPIO42, AF1)
+#define GPIO45_BTUART_RTS       MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+#define GPIO43_BTUART_TXD       MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD       MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD       MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO42_FICP_RXD         MFP_CFG_IN(GPIO42, AF2)
+#define GPIO46_FICP_RXD         MFP_CFG_IN(GPIO46, AF1)
+#define GPIO43_FICP_TXD         MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
+#define GPIO47_FICP_TXD         MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1/2/3 */
+#define GPIO11_PWM2_OUT         MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
+#define GPIO12_PWM3_OUT         MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
+#define GPIO16_PWM0_OUT         MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT         MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+#define GPIO38_PWM1_OUT         MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
+#define GPIO46_PWM2_OUT         MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
+#define GPIO47_PWM3_OUT         MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
+#define GPIO79_PWM2_OUT         MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
+#define GPIO80_PWM3_OUT         MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
+#define GPIO115_PWM1_OUT        MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO31_AC97_SYNC        MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO94_AC97_SYNC        MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
+#define GPIO30_AC97_SDATA_OUT   MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO93_AC97_SDATA_OUT   MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
+#define GPIO45_AC97_SYSCLK      MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
+#define GPIO89_AC97_SYSCLK      MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
+#define GPIO98_AC97_SYSCLK      MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
+#define GPIO95_AC97_nRESET      MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
+#define GPIO113_AC97_nRESET     MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
+#define GPIO28_AC97_BITCLK      MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0  MFP_CFG_IN(GPIO29, AF1)
+#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2)
+#define GPIO99_AC97_SDATA_IN_1  MFP_CFG_IN(GPIO99, AF2)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN    MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT   MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN     MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT    MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC         MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO113_I2S_SYSCLK      MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK        MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO29_SSP1_SCLK        MFP_CFG_IN(GPIO29, AF3)
+#define GPIO27_SSP1_SYSCLK      MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
+#define GPIO53_SSP1_SYSCLK      MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM        MFP_CFG_IN(GPIO24, AF2)
+#define GPIO28_SSP1_SFRM        MFP_CFG_IN(GPIO28, AF3)
+#define GPIO25_SSP1_TXD         MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO57_SSP1_TXD         MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
+#define GPIO26_SSP1_RXD         MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_SCLKEN      MFP_CFG_IN(GPIO27, AF2)
+
+/* SSP 2 */
+#define GPIO19_SSP2_SCLK        MFP_CFG_IN(GPIO19, AF1)
+#define GPIO22_SSP2_SCLK        MFP_CFG_IN(GPIO22, AF3)
+#define GPIO29_SSP2_SCLK        MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
+#define GPIO36_SSP2_SCLK        MFP_CFG_IN(GPIO36, AF2)
+#define GPIO50_SSP2_SCLK        MFP_CFG_IN(GPIO50, AF3)
+#define GPIO22_SSP2_SYSCLK      MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
+#define GPIO14_SSP2_SFRM        MFP_CFG_IN(GPIO14, AF2)
+#define GPIO37_SSP2_SFRM        MFP_CFG_IN(GPIO37, AF2)
+#define GPIO87_SSP2_SFRM        MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
+#define GPIO88_SSP2_SFRM        MFP_CFG_IN(GPIO88, AF3)
+#define GPIO13_SSP2_TXD         MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
+#define GPIO38_SSP2_TXD         MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
+#define GPIO87_SSP2_TXD         MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
+#define GPIO89_SSP2_TXD         MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
+#define GPIO11_SSP2_RXD         MFP_CFG_IN(GPIO11, AF2)
+#define GPIO29_SSP2_RXD         MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
+#define GPIO40_SSP2_RXD         MFP_CFG_IN(GPIO40, AF1)
+#define GPIO86_SSP2_RXD         MFP_CFG_IN(GPIO86, AF1)
+#define GPIO88_SSP2_RXD         MFP_CFG_IN(GPIO88, AF2)
+#define GPIO22_SSP2_EXTCLK      MFP_CFG_IN(GPIO22, AF1)
+#define GPIO27_SSP2_EXTCLK      MFP_CFG_IN(GPIO27, AF1)
+#define GPIO22_SSP2_SCLKEN      MFP_CFG_IN(GPIO22, AF2)
+#define GPIO23_SSP2_SCLKEN      MFP_CFG_IN(GPIO23, AF2)
+
+/* SSP 3 */
+#define GPIO34_SSP3_SCLK        MFP_CFG_IN(GPIO34, AF3)
+#define GPIO40_SSP3_SCLK        MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
+#define GPIO52_SSP3_SCLK        MFP_CFG_IN(GPIO52, AF2)
+#define GPIO84_SSP3_SCLK        MFP_CFG_IN(GPIO84, AF1)
+#define GPIO45_SSP3_SYSCLK      MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
+#define GPIO35_SSP3_SFRM        MFP_CFG_IN(GPIO35, AF3)
+#define GPIO39_SSP3_SFRM        MFP_CFG_IN(GPIO39, AF3)
+#define GPIO83_SSP3_SFRM        MFP_CFG_IN(GPIO83, AF1)
+#define GPIO35_SSP3_TXD         MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
+#define GPIO38_SSP3_TXD         MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
+#define GPIO81_SSP3_TXD         MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO41_SSP3_RXD         MFP_CFG_IN(GPIO41, AF3)
+#define GPIO82_SSP3_RXD         MFP_CFG_IN(GPIO82, AF1)
+#define GPIO89_SSP3_RXD         MFP_CFG_IN(GPIO89, AF1)
+
+/* MMC */
+#define GPIO32_MMC_CLK          MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
+#define GPIO92_MMC_DAT_0        MFP_CFG_IN(GPIO92, AF1)
+#define GPIO109_MMC_DAT_1       MFP_CFG_IN(GPIO109, AF1)
+#define GPIO110_MMC_DAT_2       MFP_CFG_IN(GPIO110, AF1)
+#define GPIO111_MMC_DAT_3       MFP_CFG_IN(GPIO111, AF1)
+#define GPIO112_MMC_CMD         MFP_CFG_IN(GPIO112, AF1)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0        MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1        MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2        MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3        MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4        MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5        MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6        MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7        MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8        MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9        MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10       MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11       MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12       MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13       MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14       MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15       MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO86_LCD_LDD_16       MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
+#define GPIO87_LCD_LDD_17       MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK         MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK         MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK         MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS         MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO14_LCD_VSYNC        MFP_CFG_IN(GPIO14, AF1)
+#define GPIO19_LCD_CS           MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
+
+/* Keypad */
+#define GPIO93_KP_DKIN_0        MFP_CFG_IN(GPIO93, AF1)
+#define GPIO94_KP_DKIN_1        MFP_CFG_IN(GPIO94, AF1)
+#define GPIO95_KP_DKIN_2        MFP_CFG_IN(GPIO95, AF1)
+#define GPIO96_KP_DKIN_3        MFP_CFG_IN(GPIO96, AF1)
+#define GPIO97_KP_DKIN_4        MFP_CFG_IN(GPIO97, AF1)
+#define GPIO98_KP_DKIN_5        MFP_CFG_IN(GPIO98, AF1)
+#define GPIO99_KP_DKIN_6        MFP_CFG_IN(GPIO99, AF1)
+#define GPIO13_KP_KDIN_7        MFP_CFG_IN(GPIO13, AF2)
+#define GPIO100_KP_MKIN_0       MFP_CFG_IN(GPIO100, AF1)
+#define GPIO101_KP_MKIN_1       MFP_CFG_IN(GPIO101, AF1)
+#define GPIO102_KP_MKIN_2       MFP_CFG_IN(GPIO102, AF1)
+#define GPIO34_KP_MKIN_3        MFP_CFG_IN(GPIO34, AF2)
+#define GPIO37_KP_MKIN_3        MFP_CFG_IN(GPIO37, AF3)
+#define GPIO97_KP_MKIN_3        MFP_CFG_IN(GPIO97, AF3)
+#define GPIO98_KP_MKIN_4        MFP_CFG_IN(GPIO98, AF3)
+#define GPIO38_KP_MKIN_4        MFP_CFG_IN(GPIO38, AF2)
+#define GPIO39_KP_MKIN_4        MFP_CFG_IN(GPIO39, AF1)
+#define GPIO16_KP_MKIN_5        MFP_CFG_IN(GPIO16, AF1)
+#define GPIO90_KP_MKIN_5        MFP_CFG_IN(GPIO90, AF1)
+#define GPIO99_KP_MKIN_5        MFP_CFG_IN(GPIO99, AF3)
+#define GPIO17_KP_MKIN_6        MFP_CFG_IN(GPIO17, AF1)
+#define GPIO91_KP_MKIN_6        MFP_CFG_IN(GPIO91, AF1)
+#define GPIO95_KP_MKIN_6        MFP_CFG_IN(GPIO95, AF3)
+#define GPIO13_KP_MKIN_7        MFP_CFG_IN(GPIO13, AF3)
+#define GPIO36_KP_MKIN_7        MFP_CFG_IN(GPIO36, AF3)
+#define GPIO103_KP_MKOUT_0      MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_1      MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_2      MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
+#define GPIO106_KP_MKOUT_3      MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
+#define GPIO107_KP_MKOUT_4      MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
+#define GPIO108_KP_MKOUT_5      MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
+#define GPIO35_KP_MKOUT_6       MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
+#define GPIO22_KP_MKOUT_7       MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
+#define GPIO40_KP_MKOUT_6       MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
+#define GPIO41_KP_MKOUT_7       MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
+#define GPIO96_KP_MKOUT_6       MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
+
+/* USB P3 */
+#define GPIO10_USB_P3_5         MFP_CFG_IN(GPIO10, AF3)
+#define GPIO11_USB_P3_1         MFP_CFG_IN(GPIO11, AF3)
+#define GPIO30_USB_P3_2         MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_USB_P3_6         MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#define GPIO56_USB_P3_4         MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO86_USB_P3_5         MFP_CFG_IN(GPIO86, AF3)
+#define GPIO87_USB_P3_1         MFP_CFG_IN(GPIO87, AF3)
+#define GPIO90_USB_P3_5         MFP_CFG_IN(GPIO90, AF2)
+#define GPIO91_USB_P3_1         MFP_CFG_IN(GPIO91, AF2)
+#define GPIO113_USB_P3_3        MFP_CFG_IN(GPIO113, AF3)
+
+/* USB P2 */
+#define GPIO34_USB_P2_2         MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
+#define GPIO35_USB_P2_1         MFP_CFG_IN(GPIO35, AF2)
+#define GPIO36_USB_P2_4         MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
+#define GPIO37_USB_P2_8         MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
+#define GPIO38_USB_P2_3         MFP_CFG_IN(GPIO38, AF3)
+#define GPIO39_USB_P2_6         MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO40_USB_P2_5         MFP_CFG_IN(GPIO40, AF3)
+#define GPIO41_USB_P2_7         MFP_CFG_IN(GPIO41, AF2)
+#define GPIO53_USB_P2_3         MFP_CFG_IN(GPIO53, AF2)
+
+/* USB Host Port 1/2 */
+#define GPIO88_USBH1_PWR        MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_USBH1_PEN        MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
+#define GPIO119_USBH2_PWR       MFP_CFG_IN(GPIO119, AF1)
+#define GPIO120_USBH2_PEN       MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
+
+/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
+#define GPIO115_CIF_DD_3        MFP_CFG_IN(GPIO115, AF2)
+#define GPIO116_CIF_DD_2        MFP_CFG_IN(GPIO116, AF1)
+#define GPIO12_CIF_DD_7         MFP_CFG_IN(GPIO12, AF2)
+#define GPIO17_CIF_DD_6         MFP_CFG_IN(GPIO17, AF2)
+#define GPIO23_CIF_MCLK         MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
+#define GPIO24_CIF_FV           MFP_CFG_IN(GPIO24, AF1)
+#define GPIO25_CIF_LV           MFP_CFG_IN(GPIO25, AF1)
+#define GPIO26_CIF_PCLK         MFP_CFG_IN(GPIO26, AF2)
+#define GPIO27_CIF_DD_0         MFP_CFG_IN(GPIO27, AF3)
+#define GPIO42_CIF_MCLK         MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
+#define GPIO43_CIF_FV           MFP_CFG_IN(GPIO43, AF3)
+#define GPIO44_CIF_LV           MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_CIF_PCLK         MFP_CFG_IN(GPIO45, AF3)
+#define GPIO47_CIF_DD_0         MFP_CFG_IN(GPIO47, AF1)
+#define GPIO48_CIF_DD_5         MFP_CFG_IN(GPIO48, AF1)
+#define GPIO50_CIF_DD_3         MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_CIF_DD_2         MFP_CFG_IN(GPIO51, AF1)
+#define GPIO52_CIF_DD_4         MFP_CFG_IN(GPIO52, AF1)
+#define GPIO53_CIF_MCLK         MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
+#define GPIO54_CIF_PCLK         MFP_CFG_IN(GPIO54, AF3)
+#define GPIO55_CIF_DD_1         MFP_CFG_IN(GPIO55, AF1)
+#define GPIO81_CIF_DD_0         MFP_CFG_IN(GPIO81, AF2)
+#define GPIO82_CIF_DD_5         MFP_CFG_IN(GPIO82, AF3)
+#define GPIO83_CIF_DD_4         MFP_CFG_IN(GPIO83, AF3)
+#define GPIO84_CIF_FV           MFP_CFG_IN(GPIO84, AF3)
+#define GPIO85_CIF_LV           MFP_CFG_IN(GPIO85, AF3)
+#define GPIO90_CIF_DD_4         MFP_CFG_IN(GPIO90, AF3)
+#define GPIO91_CIF_DD_5         MFP_CFG_IN(GPIO91, AF3)
+#define GPIO93_CIF_DD_6         MFP_CFG_IN(GPIO93, AF2)
+#define GPIO94_CIF_DD_5         MFP_CFG_IN(GPIO94, AF2)
+#define GPIO95_CIF_DD_4         MFP_CFG_IN(GPIO95, AF2)
+#define GPIO98_CIF_DD_0         MFP_CFG_IN(GPIO98, AF2)
+#define GPIO103_CIF_DD_3        MFP_CFG_IN(GPIO103, AF1)
+#define GPIO104_CIF_DD_2        MFP_CFG_IN(GPIO104, AF1)
+#define GPIO105_CIF_DD_1        MFP_CFG_IN(GPIO105, AF1)
+#define GPIO106_CIF_DD_9        MFP_CFG_IN(GPIO106, AF1)
+#define GPIO107_CIF_DD_8        MFP_CFG_IN(GPIO107, AF1)
+#define GPIO108_CIF_DD_7        MFP_CFG_IN(GPIO108, AF1)
+#define GPIO114_CIF_DD_1        MFP_CFG_IN(GPIO114, AF1)
+
+/* Universal Subscriber ID Interface */
+#define GPIO114_UVS0            MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
+#define GPIO115_nUVS1           MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
+#define GPIO116_nUVS2           MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
+#define GPIO14_UCLK             MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
+#define GPIO91_UCLK             MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
+#define GPIO19_nURST            MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
+#define GPIO90_nURST            MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
+#define GPIO116_UDET            MFP_CFG_IN(GPIO116, AF3)
+#define GPIO114_UEN             MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
+#define GPIO115_UEN             MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
+
+/* Mobile Scalable Link (MSL) Interface */
+#define GPIO81_BB_OB_DAT_0      MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
+#define GPIO48_BB_OB_DAT_1      MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
+#define GPIO50_BB_OB_DAT_2      MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
+#define GPIO51_BB_OB_DAT_3      MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
+#define GPIO52_BB_OB_CLK        MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
+#define GPIO53_BB_OB_STB        MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_BB_OB_WAIT       MFP_CFG_IN(GPIO54, AF2)
+#define GPIO82_BB_IB_DAT_0      MFP_CFG_IN(GPIO82, AF2)
+#define GPIO55_BB_IB_DAT_1      MFP_CFG_IN(GPIO55, AF2)
+#define GPIO56_BB_IB_DAT_2      MFP_CFG_IN(GPIO56, AF2)
+#define GPIO57_BB_IB_DAT_3      MFP_CFG_IN(GPIO57, AF2)
+#define GPIO83_BB_IB_CLK        MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_BB_IB_STB        MFP_CFG_IN(GPIO84, AF2)
+#define GPIO85_BB_IB_WAIT       MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
+
+/* Memory Stick Host Controller */
+#define GPIO92_MSBS             MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
+#define GPIO109_MSSDIO          MFP_CFG_IN(GPIO109, AF2)
+#define GPIO112_nMSINS          MFP_CFG_IN(GPIO112, AF2)
+#define GPIO32_MSSCLK           MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+extern int keypad_set_wake(unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
new file mode 100644
index 000000000000..3e9211591e20
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -0,0 +1,133 @@
+#ifndef __ASM_ARCH_MFP_PXA2XX_H
+#define __ASM_ARCH_MFP_PXA2XX_H
+
+#include <mach/mfp.h>
+
+/*
+ * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
+ *
+ *  MFP_PIN(x)
+ *  MFP_AFx
+ *  MFP_LPM_DRIVE_{LOW, HIGH}
+ *  MFP_LPM_EDGE_x
+ *
+ * other MFP_x bit definitions will be ignored
+ *
+ * and adds the below two bits specifically for pxa2xx:
+ *
+ * bit     23 - Input/Output (PXA2xx specific)
+ * bit     24 - Wakeup Enable(PXA2xx specific)
+ */
+
+#define MFP_DIR_IN              (0x0 << 23)
+#define MFP_DIR_OUT             (0x1 << 23)
+#define MFP_DIR_MASK            (0x1 << 23)
+#define MFP_DIR(x)              (((x) >> 23) & 0x1)
+
+#define MFP_LPM_CAN_WAKEUP      (0x1 << 24)
+#define WAKEUP_ON_EDGE_RISE     (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
+#define WAKEUP_ON_EDGE_FALL     (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
+#define WAKEUP_ON_EDGE_BOTH     (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
+
+/* specifically for enabling wakeup on keypad GPIOs */
+#define WAKEUP_ON_LEVEL_HIGH    (MFP_LPM_CAN_WAKEUP)
+
+#define MFP_CFG_IN(pin, af)             \
+        ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+         (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
+
+/* NOTE:  pins configured as output _must_ provide a low power state,
+ * and this state should help to minimize the power dissipation.
+ */
+#define MFP_CFG_OUT(pin, af, state)     \
+        ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+         (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Common configurations for pxa25x and pxa27x
+ *
+ * Note: pins configured as GPIO are always initialized to input
+ * so not to cause any side effect
+ */
+#define GPIO0_GPIO      MFP_CFG_IN(GPIO0, AF0)
+#define GPIO1_GPIO      MFP_CFG_IN(GPIO1, AF0)
+#define GPIO9_GPIO      MFP_CFG_IN(GPIO9, AF0)
+#define GPIO10_GPIO     MFP_CFG_IN(GPIO10, AF0)
+#define GPIO11_GPIO     MFP_CFG_IN(GPIO11, AF0)
+#define GPIO12_GPIO     MFP_CFG_IN(GPIO12, AF0)
+#define GPIO13_GPIO     MFP_CFG_IN(GPIO13, AF0)
+#define GPIO14_GPIO     MFP_CFG_IN(GPIO14, AF0)
+#define GPIO15_GPIO     MFP_CFG_IN(GPIO15, AF0)
+#define GPIO16_GPIO     MFP_CFG_IN(GPIO16, AF0)
+#define GPIO17_GPIO     MFP_CFG_IN(GPIO17, AF0)
+#define GPIO18_GPIO     MFP_CFG_IN(GPIO18, AF0)
+#define GPIO19_GPIO     MFP_CFG_IN(GPIO19, AF0)
+#define GPIO20_GPIO     MFP_CFG_IN(GPIO20, AF0)
+#define GPIO21_GPIO     MFP_CFG_IN(GPIO21, AF0)
+#define GPIO22_GPIO     MFP_CFG_IN(GPIO22, AF0)
+#define GPIO23_GPIO     MFP_CFG_IN(GPIO23, AF0)
+#define GPIO24_GPIO     MFP_CFG_IN(GPIO24, AF0)
+#define GPIO25_GPIO     MFP_CFG_IN(GPIO25, AF0)
+#define GPIO26_GPIO     MFP_CFG_IN(GPIO26, AF0)
+#define GPIO27_GPIO     MFP_CFG_IN(GPIO27, AF0)
+#define GPIO28_GPIO     MFP_CFG_IN(GPIO28, AF0)
+#define GPIO29_GPIO     MFP_CFG_IN(GPIO29, AF0)
+#define GPIO30_GPIO     MFP_CFG_IN(GPIO30, AF0)
+#define GPIO31_GPIO     MFP_CFG_IN(GPIO31, AF0)
+#define GPIO32_GPIO     MFP_CFG_IN(GPIO32, AF0)
+#define GPIO33_GPIO     MFP_CFG_IN(GPIO33, AF0)
+#define GPIO34_GPIO     MFP_CFG_IN(GPIO34, AF0)
+#define GPIO35_GPIO     MFP_CFG_IN(GPIO35, AF0)
+#define GPIO36_GPIO     MFP_CFG_IN(GPIO36, AF0)
+#define GPIO37_GPIO     MFP_CFG_IN(GPIO37, AF0)
+#define GPIO38_GPIO     MFP_CFG_IN(GPIO38, AF0)
+#define GPIO39_GPIO     MFP_CFG_IN(GPIO39, AF0)
+#define GPIO40_GPIO     MFP_CFG_IN(GPIO40, AF0)
+#define GPIO41_GPIO     MFP_CFG_IN(GPIO41, AF0)
+#define GPIO42_GPIO     MFP_CFG_IN(GPIO42, AF0)
+#define GPIO43_GPIO     MFP_CFG_IN(GPIO43, AF0)
+#define GPIO44_GPIO     MFP_CFG_IN(GPIO44, AF0)
+#define GPIO45_GPIO     MFP_CFG_IN(GPIO45, AF0)
+#define GPIO46_GPIO     MFP_CFG_IN(GPIO46, AF0)
+#define GPIO47_GPIO     MFP_CFG_IN(GPIO47, AF0)
+#define GPIO48_GPIO     MFP_CFG_IN(GPIO48, AF0)
+#define GPIO49_GPIO     MFP_CFG_IN(GPIO49, AF0)
+#define GPIO50_GPIO     MFP_CFG_IN(GPIO50, AF0)
+#define GPIO51_GPIO     MFP_CFG_IN(GPIO51, AF0)
+#define GPIO52_GPIO     MFP_CFG_IN(GPIO52, AF0)
+#define GPIO53_GPIO     MFP_CFG_IN(GPIO53, AF0)
+#define GPIO54_GPIO     MFP_CFG_IN(GPIO54, AF0)
+#define GPIO55_GPIO     MFP_CFG_IN(GPIO55, AF0)
+#define GPIO56_GPIO     MFP_CFG_IN(GPIO56, AF0)
+#define GPIO57_GPIO     MFP_CFG_IN(GPIO57, AF0)
+#define GPIO58_GPIO     MFP_CFG_IN(GPIO58, AF0)
+#define GPIO59_GPIO     MFP_CFG_IN(GPIO59, AF0)
+#define GPIO60_GPIO     MFP_CFG_IN(GPIO60, AF0)
+#define GPIO61_GPIO     MFP_CFG_IN(GPIO61, AF0)
+#define GPIO62_GPIO     MFP_CFG_IN(GPIO62, AF0)
+#define GPIO63_GPIO     MFP_CFG_IN(GPIO63, AF0)
+#define GPIO64_GPIO     MFP_CFG_IN(GPIO64, AF0)
+#define GPIO65_GPIO     MFP_CFG_IN(GPIO65, AF0)
+#define GPIO66_GPIO     MFP_CFG_IN(GPIO66, AF0)
+#define GPIO67_GPIO     MFP_CFG_IN(GPIO67, AF0)
+#define GPIO68_GPIO     MFP_CFG_IN(GPIO68, AF0)
+#define GPIO69_GPIO     MFP_CFG_IN(GPIO69, AF0)
+#define GPIO70_GPIO     MFP_CFG_IN(GPIO70, AF0)
+#define GPIO71_GPIO     MFP_CFG_IN(GPIO71, AF0)
+#define GPIO72_GPIO     MFP_CFG_IN(GPIO72, AF0)
+#define GPIO73_GPIO     MFP_CFG_IN(GPIO73, AF0)
+#define GPIO74_GPIO     MFP_CFG_IN(GPIO74, AF0)
+#define GPIO75_GPIO     MFP_CFG_IN(GPIO75, AF0)
+#define GPIO76_GPIO     MFP_CFG_IN(GPIO76, AF0)
+#define GPIO77_GPIO     MFP_CFG_IN(GPIO77, AF0)
+#define GPIO78_GPIO     MFP_CFG_IN(GPIO78, AF0)
+#define GPIO79_GPIO     MFP_CFG_IN(GPIO79, AF0)
+#define GPIO80_GPIO     MFP_CFG_IN(GPIO80, AF0)
+#define GPIO81_GPIO     MFP_CFG_IN(GPIO81, AF0)
+#define GPIO82_GPIO     MFP_CFG_IN(GPIO82, AF0)
+#define GPIO83_GPIO     MFP_CFG_IN(GPIO83, AF0)
+#define GPIO84_GPIO     MFP_CFG_IN(GPIO84, AF0)
+
+extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
+extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
+extern int gpio_set_wake(unsigned int gpio, unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
new file mode 100644
index 000000000000..bc1fb33a6e70
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -0,0 +1,575 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+ *
+ * PXA300/PXA310 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA300_H
+#define __ASM_ARCH_MFP_PXA300_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO             MFP_CFG(GPIO46, AF1)
+#define GPIO49_GPIO             MFP_CFG(GPIO49, AF3)
+#define GPIO50_GPIO             MFP_CFG(GPIO50, AF2)
+#define GPIO51_GPIO             MFP_CFG(GPIO51, AF3)
+#define GPIO52_GPIO             MFP_CFG(GPIO52, AF3)
+#define GPIO56_GPIO             MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO             MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO             MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO             MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO             MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO             MFP_CFG(GPIO62, AF0)
+
+#ifdef CONFIG_CPU_PXA310
+#define GPIO7_2_GPIO            MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO            MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO            MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO           MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO           MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO           MFP_CFG(GPIO12_2, AF0)
+#endif
+
+/* Chip Select */
+#define GPIO2_nCS3              MFP_CFG(GPIO2,  AF1)
+
+/* AC97 */
+#define GPIO23_AC97_nACRESET    MFP_CFG(GPIO23, AF1)
+#define GPIO24_AC97_SYSCLK      MFP_CFG(GPIO24, AF1)
+#define GPIO29_AC97_BITCLK      MFP_CFG(GPIO29, AF1)
+#define GPIO25_AC97_SDATA_IN_0  MFP_CFG(GPIO25, AF1)
+#define GPIO26_AC97_SDATA_IN_1  MFP_CFG(GPIO26, AF1)
+#define GPIO17_AC97_SDATA_IN_2  MFP_CFG(GPIO17, AF3)
+#define GPIO21_AC97_SDATA_IN_2  MFP_CFG(GPIO21, AF2)
+#define GPIO18_AC97_SDATA_IN_3  MFP_CFG(GPIO18, AF3)
+#define GPIO22_AC97_SDATA_IN_3  MFP_CFG(GPIO22, AF2)
+#define GPIO27_AC97_SDATA_OUT   MFP_CFG(GPIO27, AF1)
+#define GPIO28_AC97_SYNC        MFP_CFG(GPIO28, AF1)
+
+/* I2C */
+#define GPIO21_I2C_SCL          MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
+#define GPIO22_I2C_SDA          MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO39_CI_DD_0          MFP_CFG_DRV(GPIO39, AF1, DS04X)
+#define GPIO40_CI_DD_1          MFP_CFG_DRV(GPIO40, AF1, DS04X)
+#define GPIO41_CI_DD_2          MFP_CFG_DRV(GPIO41, AF1, DS04X)
+#define GPIO42_CI_DD_3          MFP_CFG_DRV(GPIO42, AF1, DS04X)
+#define GPIO43_CI_DD_4          MFP_CFG_DRV(GPIO43, AF1, DS04X)
+#define GPIO44_CI_DD_5          MFP_CFG_DRV(GPIO44, AF1, DS04X)
+#define GPIO45_CI_DD_6          MFP_CFG_DRV(GPIO45, AF1, DS04X)
+#define GPIO46_CI_DD_7          MFP_CFG_DRV(GPIO46, AF0, DS04X)
+#define GPIO47_CI_DD_8          MFP_CFG_DRV(GPIO47, AF1, DS04X)
+#define GPIO48_CI_DD_9          MFP_CFG_DRV(GPIO48, AF1, DS04X)
+#define GPIO52_CI_HSYNC         MFP_CFG_DRV(GPIO52, AF0, DS04X)
+#define GPIO51_CI_VSYNC         MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO49_CI_MCLK          MFP_CFG_DRV(GPIO49, AF0, DS04X)
+#define GPIO50_CI_PCLK          MFP_CFG_DRV(GPIO50, AF0, DS04X)
+
+/* KEYPAD */
+#define GPIO3_KP_DKIN_6         MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
+#define GPIO4_KP_DKIN_7         MFP_CFG_LPM(GPIO4,   AF2, FLOAT)
+#define GPIO16_KP_DKIN_6        MFP_CFG_LPM(GPIO16,  AF6, FLOAT)
+#define GPIO83_KP_DKIN_2        MFP_CFG_LPM(GPIO83,  AF5, FLOAT)
+#define GPIO84_KP_DKIN_1        MFP_CFG_LPM(GPIO84,  AF5, FLOAT)
+#define GPIO85_KP_DKIN_0        MFP_CFG_LPM(GPIO85,  AF3, FLOAT)
+#define GPIO86_KP_DKIN_1        MFP_CFG_LPM(GPIO86,  AF3, FLOAT)
+#define GPIO87_KP_DKIN_2        MFP_CFG_LPM(GPIO87,  AF3, FLOAT)
+#define GPIO88_KP_DKIN_3        MFP_CFG_LPM(GPIO88,  AF3, FLOAT)
+#define GPIO89_KP_DKIN_3        MFP_CFG_LPM(GPIO89,  AF3, FLOAT)
+#define GPIO107_KP_DKIN_0       MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_1       MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_2       MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_3       MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_4       MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_5       MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+#define GPIO113_KP_DKIN_6       MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_7       MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_0       MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_1       MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_2       MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_3       MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_4       MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_5       MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6       MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5       MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4       MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3       MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO127_KP_DKIN_0       MFP_CFG_LPM(GPIO127, AF5, FLOAT)
+#define GPIO0_2_KP_DKIN_0       MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+#define GPIO1_2_KP_DKIN_1       MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
+#define GPIO2_2_KP_DKIN_6       MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_7       MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_1       MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+#define GPIO5_2_KP_DKIN_0       MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
+
+#define GPIO5_KP_MKIN_0         MFP_CFG_LPM(GPIO5,   AF2, FLOAT)
+#define GPIO6_KP_MKIN_1         MFP_CFG_LPM(GPIO6,   AF2, FLOAT)
+#define GPIO9_KP_MKIN_6         MFP_CFG_LPM(GPIO9,   AF3, FLOAT)
+#define GPIO10_KP_MKIN_7        MFP_CFG_LPM(GPIO10,  AF3, FLOAT)
+#define GPIO70_KP_MKIN_6        MFP_CFG_LPM(GPIO70,  AF3, FLOAT)
+#define GPIO71_KP_MKIN_7        MFP_CFG_LPM(GPIO71,  AF3, FLOAT)
+#define GPIO100_KP_MKIN_6       MFP_CFG_LPM(GPIO100, AF7, FLOAT)
+#define GPIO101_KP_MKIN_7       MFP_CFG_LPM(GPIO101, AF7, FLOAT)
+#define GPIO112_KP_MKIN_6       MFP_CFG_LPM(GPIO112, AF4, FLOAT)
+#define GPIO113_KP_MKIN_7       MFP_CFG_LPM(GPIO113, AF4, FLOAT)
+#define GPIO115_KP_MKIN_0       MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_1       MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_2       MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_3       MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_4       MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_5       MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+#define GPIO125_KP_MKIN_2       MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO2_2_KP_MKIN_6       MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
+#define GPIO3_2_KP_MKIN_7       MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
+
+#define GPIO7_KP_MKOUT_5        MFP_CFG_LPM(GPIO7,   AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5       MFP_CFG_LPM(GPIO11,  AF3, DRIVE_HIGH)
+#define GPIO12_KP_MKOUT_6       MFP_CFG_LPM(GPIO12,  AF3, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_7       MFP_CFG_LPM(GPIO13,  AF3, DRIVE_HIGH)
+#define GPIO19_KP_MKOUT_4       MFP_CFG_LPM(GPIO19,  AF3, DRIVE_HIGH)
+#define GPIO20_KP_MKOUT_5       MFP_CFG_LPM(GPIO20,  AF3, DRIVE_HIGH)
+#define GPIO38_KP_MKOUT_5       MFP_CFG_LPM(GPIO38,  AF5, DRIVE_HIGH)
+#define GPIO53_KP_MKOUT_6       MFP_CFG_LPM(GPIO53,  AF5, DRIVE_HIGH)
+#define GPIO78_KP_MKOUT_7       MFP_CFG_LPM(GPIO78,  AF5, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_0       MFP_CFG_LPM(GPIO85,  AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_1       MFP_CFG_LPM(GPIO86,  AF2, DRIVE_HIGH)
+#define GPIO87_KP_MKOUT_2       MFP_CFG_LPM(GPIO87,  AF2, DRIVE_HIGH)
+#define GPIO88_KP_MKOUT_3       MFP_CFG_LPM(GPIO88,  AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_6      MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_7      MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
+#define GPIO121_KP_MKOUT_0      MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1      MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2      MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3      MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4      MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_7      MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_6      MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+#define GPIO4_2_KP_MKOUT_5      MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
+#define GPIO6_2_KP_MKOUT_7      MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO54_LCD_LDD_0        MFP_CFG_DRV(GPIO54, AF1, DS01X)
+#define GPIO55_LCD_LDD_1        MFP_CFG_DRV(GPIO55, AF1, DS01X)
+#define GPIO56_LCD_LDD_2        MFP_CFG_DRV(GPIO56, AF1, DS01X)
+#define GPIO57_LCD_LDD_3        MFP_CFG_DRV(GPIO57, AF1, DS01X)
+#define GPIO58_LCD_LDD_4        MFP_CFG_DRV(GPIO58, AF1, DS01X)
+#define GPIO59_LCD_LDD_5        MFP_CFG_DRV(GPIO59, AF1, DS01X)
+#define GPIO60_LCD_LDD_6        MFP_CFG_DRV(GPIO60, AF1, DS01X)
+#define GPIO61_LCD_LDD_7        MFP_CFG_DRV(GPIO61, AF1, DS01X)
+#define GPIO62_LCD_LDD_8        MFP_CFG_DRV(GPIO62, AF1, DS01X)
+#define GPIO63_LCD_LDD_9        MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_10       MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_11       MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_12       MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_13       MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_14       MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_15       MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_16       MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_17       MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO62_LCD_CS_N         MFP_CFG_DRV(GPIO62, AF2, DS01X)
+#define GPIO72_LCD_FCLK         MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_LCLK         MFP_CFG_DRV(GPIO73, AF1, DS01X)
+#define GPIO74_LCD_PCLK         MFP_CFG_DRV(GPIO74, AF1, DS02X)
+#define GPIO75_LCD_BIAS         MFP_CFG_DRV(GPIO75, AF1, DS01X)
+#define GPIO76_LCD_VSYNC        MFP_CFG_DRV(GPIO76, AF2, DS01X)
+
+#define GPIO15_LCD_CS_N         MFP_CFG_DRV(GPIO15,  AF2, DS01X)
+#define GPIO127_LCD_CS_N        MFP_CFG_DRV(GPIO127, AF1, DS01X)
+#define GPIO63_LCD_VSYNC        MFP_CFG_DRV(GPIO63,  AF2, DS01X)
+
+/* Mini-LCD */
+#define GPIO72_MLCD_FCLK        MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_LCLK        MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO54_MLCD_LDD_0       MFP_CFG_DRV(GPIO54, AF7, DS08X)
+#define GPIO55_MLCD_LDD_1       MFP_CFG_DRV(GPIO55, AF7, DS08X)
+#define GPIO56_MLCD_LDD_2       MFP_CFG_DRV(GPIO56, AF7, DS08X)
+#define GPIO57_MLCD_LDD_3       MFP_CFG_DRV(GPIO57, AF7, DS08X)
+#define GPIO58_MLCD_LDD_4       MFP_CFG_DRV(GPIO58, AF7, DS08X)
+#define GPIO59_MLCD_LDD_5       MFP_CFG_DRV(GPIO59, AF7, DS08X)
+#define GPIO60_MLCD_LDD_6       MFP_CFG_DRV(GPIO60, AF7, DS08X)
+#define GPIO61_MLCD_LDD_7       MFP_CFG_DRV(GPIO61, AF7, DS08X)
+#define GPIO62_MLCD_LDD_8       MFP_CFG_DRV(GPIO62, AF7, DS08X)
+#define GPIO63_MLCD_LDD_9       MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_LDD_10      MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_LDD_11      MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_LDD_12      MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_LDD_13      MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_LDD_14      MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_LDD_15      MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO74_MLCD_PCLK        MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO75_MLCD_BIAS        MFP_CFG_DRV(GPIO75, AF2, DS08X)
+
+/* MMC1 */
+#define GPIO7_MMC1_CLK          MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_CMD          MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO14_MMC1_CMD         MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
+#define GPIO15_MMC1_CMD         MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
+#define GPIO3_MMC1_DAT0         MFP_CFG_LPM(GPIO3,  AF4, DRIVE_HIGH)
+#define GPIO4_MMC1_DAT1         MFP_CFG_LPM(GPIO4,  AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT2         MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT3         MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+
+/* MMC2 */
+#define GPIO9_MMC2_DAT0         MFP_CFG_LPM(GPIO9,  AF4, PULL_HIGH)
+#define GPIO10_MMC2_DAT1        MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
+#define GPIO11_MMC2_DAT2        MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
+#define GPIO12_MMC2_DAT3        MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
+#define GPIO13_MMC2_CLK         MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
+#define GPIO14_MMC2_CMD         MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT0        MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT1        MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+#define GPIO79_MMC2_DAT2        MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_DAT3        MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+#define GPIO81_MMC2_CLK         MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
+#define GPIO82_MMC2_CMD         MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
+
+/* SSP1 */
+#define GPIO89_SSP1_EXTCLK      MFP_CFG(GPIO89, AF1)
+#define GPIO90_SSP1_SYSCLK      MFP_CFG(GPIO90, AF1)
+#define GPIO15_SSP1_SCLK        MFP_CFG(GPIO15, AF6)
+#define GPIO16_SSP1_FRM         MFP_CFG(GPIO16, AF2)
+#define GPIO33_SSP1_SCLK        MFP_CFG(GPIO33, AF5)
+#define GPIO34_SSP1_FRM         MFP_CFG(GPIO34, AF5)
+#define GPIO85_SSP1_SCLK        MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_FRM         MFP_CFG(GPIO86, AF1)
+#define GPIO18_SSP1_TXD         MFP_CFG(GPIO18, AF7)
+#define GPIO18_SSP1_RXD         MFP_CFG(GPIO18, AF2)
+#define GPIO20_SSP1_TXD         MFP_CFG(GPIO20, AF2)
+#define GPIO20_SSP1_RXD         MFP_CFG(GPIO20, AF7)
+#define GPIO35_SSP1_TXD         MFP_CFG(GPIO35, AF5)
+#define GPIO35_SSP1_RXD         MFP_CFG(GPIO35, AF4)
+#define GPIO36_SSP1_TXD         MFP_CFG(GPIO36, AF5)
+#define GPIO36_SSP1_RXD         MFP_CFG(GPIO36, AF6)
+#define GPIO87_SSP1_TXD         MFP_CFG(GPIO87, AF1)
+#define GPIO87_SSP1_RXD         MFP_CFG(GPIO87, AF6)
+#define GPIO88_SSP1_TXD         MFP_CFG(GPIO88, AF6)
+#define GPIO88_SSP1_RXD         MFP_CFG(GPIO88, AF1)
+
+/* SSP2 */
+#define GPIO29_SSP2_EXTCLK      MFP_CFG(GPIO29, AF2)
+#define GPIO23_SSP2_SCLK        MFP_CFG(GPIO23, AF2)
+#define GPIO17_SSP2_FRM         MFP_CFG(GPIO17, AF2)
+#define GPIO25_SSP2_SCLK        MFP_CFG(GPIO25, AF2)
+#define GPIO26_SSP2_FRM         MFP_CFG(GPIO26, AF2)
+#define GPIO33_SSP2_SCLK        MFP_CFG(GPIO33, AF6)
+#define GPIO34_SSP2_FRM         MFP_CFG(GPIO34, AF6)
+#define GPIO64_SSP2_SCLK        MFP_CFG(GPIO64, AF2)
+#define GPIO65_SSP2_FRM         MFP_CFG(GPIO65, AF2)
+#define GPIO19_SSP2_TXD         MFP_CFG(GPIO19, AF2)
+#define GPIO19_SSP2_RXD         MFP_CFG(GPIO19, AF7)
+#define GPIO24_SSP2_TXD         MFP_CFG(GPIO24, AF5)
+#define GPIO24_SSP2_RXD         MFP_CFG(GPIO24, AF4)
+#define GPIO27_SSP2_TXD         MFP_CFG(GPIO27, AF2)
+#define GPIO27_SSP2_RXD         MFP_CFG(GPIO27, AF5)
+#define GPIO28_SSP2_TXD         MFP_CFG(GPIO28, AF5)
+#define GPIO28_SSP2_RXD         MFP_CFG(GPIO28, AF2)
+#define GPIO35_SSP2_TXD         MFP_CFG(GPIO35, AF7)
+#define GPIO35_SSP2_RXD         MFP_CFG(GPIO35, AF6)
+#define GPIO66_SSP2_TXD         MFP_CFG(GPIO66, AF4)
+#define GPIO66_SSP2_RXD         MFP_CFG(GPIO66, AF2)
+#define GPIO67_SSP2_TXD         MFP_CFG(GPIO67, AF2)
+#define GPIO67_SSP2_RXD         MFP_CFG(GPIO67, AF4)
+#define GPIO36_SSP2_TXD         MFP_CFG(GPIO36, AF7)
+
+/* SSP3 */
+#define GPIO69_SSP3_FRM         MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
+#define GPIO68_SSP3_SCLK        MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
+#define GPIO92_SSP3_FRM         MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_SCLK        MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
+#define GPIO70_SSP3_TXD         MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO70_SSP3_RXD         MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD         MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD         MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
+#define GPIO93_SSP3_TXD         MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
+#define GPIO93_SSP3_RXD         MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
+#define GPIO94_SSP3_TXD         MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
+#define GPIO94_SSP3_RXD         MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+
+/* SSP4 */
+#define GPIO95_SSP4_SCLK        MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_FRM         MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO97_SSP4_TXD         MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
+#define GPIO97_SSP4_RXD         MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
+#define GPIO98_SSP4_TXD         MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
+#define GPIO98_SSP4_RXD         MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
+
+/* UART1 */
+#define GPIO32_UART1_CTS        MFP_CFG_LPM(GPIO32,  AF2, FLOAT)
+#define GPIO37_UART1_CTS        MFP_CFG_LPM(GPIO37,  AF4, FLOAT)
+#define GPIO79_UART1_CTS        MFP_CFG_LPM(GPIO79,  AF1, FLOAT)
+#define GPIO84_UART1_CTS        MFP_CFG_LPM(GPIO84,  AF3, FLOAT)
+#define GPIO101_UART1_CTS       MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO106_UART1_CTS       MFP_CFG_LPM(GPIO106, AF6, FLOAT)
+
+#define GPIO32_UART1_RTS        MFP_CFG_LPM(GPIO32,  AF4, FLOAT)
+#define GPIO37_UART1_RTS        MFP_CFG_LPM(GPIO37,  AF2, FLOAT)
+#define GPIO79_UART1_RTS        MFP_CFG_LPM(GPIO79,  AF3, FLOAT)
+#define GPIO84_UART1_RTS        MFP_CFG_LPM(GPIO84,  AF1, FLOAT)
+#define GPIO101_UART1_RTS       MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO106_UART1_RTS       MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+
+#define GPIO34_UART1_DSR        MFP_CFG_LPM(GPIO34,  AF2, FLOAT)
+#define GPIO36_UART1_DSR        MFP_CFG_LPM(GPIO36,  AF4, FLOAT)
+#define GPIO81_UART1_DSR        MFP_CFG_LPM(GPIO81,  AF1, FLOAT)
+#define GPIO83_UART1_DSR        MFP_CFG_LPM(GPIO83,  AF3, FLOAT)
+#define GPIO103_UART1_DSR       MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO105_UART1_DSR       MFP_CFG_LPM(GPIO105, AF6, FLOAT)
+
+#define GPIO34_UART1_DTR        MFP_CFG_LPM(GPIO34,  AF4, FLOAT)
+#define GPIO36_UART1_DTR        MFP_CFG_LPM(GPIO36,  AF2, FLOAT)
+#define GPIO81_UART1_DTR        MFP_CFG_LPM(GPIO81,  AF3, FLOAT)
+#define GPIO83_UART1_DTR        MFP_CFG_LPM(GPIO83,  AF1, FLOAT)
+#define GPIO103_UART1_DTR       MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO105_UART1_DTR       MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+
+#define GPIO35_UART1_RI         MFP_CFG_LPM(GPIO35,  AF2, FLOAT)
+#define GPIO82_UART1_RI         MFP_CFG_LPM(GPIO82,  AF1, FLOAT)
+#define GPIO104_UART1_RI        MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+
+#define GPIO33_UART1_DCD        MFP_CFG_LPM(GPIO33,  AF2, FLOAT)
+#define GPIO80_UART1_DCD        MFP_CFG_LPM(GPIO80,  AF1, FLOAT)
+#define GPIO102_UART1_DCD       MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+#define GPIO30_UART1_RXD        MFP_CFG_LPM(GPIO30,  AF2, FLOAT)
+#define GPIO31_UART1_RXD        MFP_CFG_LPM(GPIO31,  AF4, FLOAT)
+#define GPIO77_UART1_RXD        MFP_CFG_LPM(GPIO77,  AF1, FLOAT)
+#define GPIO78_UART1_RXD        MFP_CFG_LPM(GPIO78,  AF3, FLOAT)
+#define GPIO99_UART1_RXD        MFP_CFG_LPM(GPIO99,  AF1, FLOAT)
+#define GPIO100_UART1_RXD       MFP_CFG_LPM(GPIO100, AF6, FLOAT)
+#define GPIO102_UART1_RXD       MFP_CFG_LPM(GPIO102, AF6, FLOAT)
+#define GPIO104_UART1_RXD       MFP_CFG_LPM(GPIO104, AF4, FLOAT)
+
+#define GPIO30_UART1_TXD        MFP_CFG_LPM(GPIO30,  AF4, FLOAT)
+#define GPIO31_UART1_TXD        MFP_CFG_LPM(GPIO31,  AF2, FLOAT)
+#define GPIO77_UART1_TXD        MFP_CFG_LPM(GPIO77,  AF3, FLOAT)
+#define GPIO78_UART1_TXD        MFP_CFG_LPM(GPIO78,  AF1, FLOAT)
+#define GPIO99_UART1_TXD        MFP_CFG_LPM(GPIO99,  AF6, FLOAT)
+#define GPIO100_UART1_TXD       MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO102_UART1_TXD       MFP_CFG_LPM(GPIO102, AF4, FLOAT)
+
+/* UART2 */
+#define GPIO15_UART2_CTS        MFP_CFG_LPM(GPIO15,  AF3, FLOAT)
+#define GPIO16_UART2_CTS        MFP_CFG_LPM(GPIO16,  AF5, FLOAT)
+#define GPIO111_UART2_CTS       MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO114_UART2_CTS       MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+
+#define GPIO15_UART2_RTS        MFP_CFG_LPM(GPIO15,  AF4, FLOAT)
+#define GPIO16_UART2_RTS        MFP_CFG_LPM(GPIO16,  AF4, FLOAT)
+#define GPIO114_UART2_RTS       MFP_CFG_LPM(GPIO114, AF3, FLOAT)
+#define GPIO111_UART2_RTS       MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+#define GPIO18_UART2_RXD        MFP_CFG_LPM(GPIO18,  AF5, FLOAT)
+#define GPIO19_UART2_RXD        MFP_CFG_LPM(GPIO19,  AF4, FLOAT)
+#define GPIO112_UART2_RXD       MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO113_UART2_RXD       MFP_CFG_LPM(GPIO113, AF3, FLOAT)
+
+#define GPIO18_UART2_TXD        MFP_CFG_LPM(GPIO18,  AF4, FLOAT)
+#define GPIO19_UART2_TXD        MFP_CFG_LPM(GPIO19,  AF5, FLOAT)
+#define GPIO112_UART2_TXD       MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO113_UART2_TXD       MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO91_UART3_CTS        MFP_CFG_LPM(GPIO91,  AF2, FLOAT)
+#define GPIO92_UART3_CTS        MFP_CFG_LPM(GPIO92,  AF4, FLOAT)
+#define GPIO107_UART3_CTS       MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_CTS       MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+#define GPIO91_UART3_RTS        MFP_CFG_LPM(GPIO91,  AF4, FLOAT)
+#define GPIO92_UART3_RTS        MFP_CFG_LPM(GPIO92,  AF2, FLOAT)
+#define GPIO107_UART3_RTS       MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO108_UART3_RTS       MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+
+#define GPIO7_UART3_RXD         MFP_CFG_LPM(GPIO7,   AF2, FLOAT)
+#define GPIO8_UART3_RXD         MFP_CFG_LPM(GPIO8,   AF6, FLOAT)
+#define GPIO93_UART3_RXD        MFP_CFG_LPM(GPIO93,  AF4, FLOAT)
+#define GPIO94_UART3_RXD        MFP_CFG_LPM(GPIO94,  AF2, FLOAT)
+#define GPIO109_UART3_RXD       MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO110_UART3_RXD       MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+
+#define GPIO7_UART3_TXD         MFP_CFG_LPM(GPIO7,   AF6, FLOAT)
+#define GPIO8_UART3_TXD         MFP_CFG_LPM(GPIO8,   AF2, FLOAT)
+#define GPIO93_UART3_TXD        MFP_CFG_LPM(GPIO93,  AF2, FLOAT)
+#define GPIO94_UART3_TXD        MFP_CFG_LPM(GPIO94,  AF4, FLOAT)
+#define GPIO109_UART3_TXD       MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO110_UART3_TXD       MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+
+/* USB Host */
+#define GPIO0_2_USBH_PEN        MFP_CFG(GPIO0_2, AF1)
+#define GPIO1_2_USBH_PWR        MFP_CFG(GPIO1_2, AF1)
+
+/* USB P3 */
+#define GPIO77_USB_P3_1         MFP_CFG(GPIO77,  AF2)
+#define GPIO78_USB_P3_2         MFP_CFG(GPIO78,  AF2)
+#define GPIO79_USB_P3_3         MFP_CFG(GPIO79,  AF2)
+#define GPIO80_USB_P3_4         MFP_CFG(GPIO80,  AF2)
+#define GPIO81_USB_P3_5         MFP_CFG(GPIO81,  AF2)
+#define GPIO82_USB_P3_6         MFP_CFG(GPIO82,  AF2)
+
+/* PWM */
+#define GPIO17_PWM0_OUT         MFP_CFG(GPIO17, AF1)
+#define GPIO18_PWM1_OUT         MFP_CFG(GPIO18, AF1)
+#define GPIO19_PWM2_OUT         MFP_CFG(GPIO19, AF1)
+#define GPIO20_PWM3_OUT         MFP_CFG(GPIO20, AF1)
+
+/* CIR */
+#define GPIO8_CIR_OUT           MFP_CFG(GPIO8, AF5)
+#define GPIO16_CIR_OUT          MFP_CFG(GPIO16, AF3)
+
+#define GPIO20_OW_DQ_IN         MFP_CFG(GPIO20, AF5)
+#define GPIO126_OW_DQ           MFP_CFG(GPIO126, AF2)
+
+#define GPIO0_DF_RDY            MFP_CFG(GPIO0, AF1)
+#define GPIO7_CLK_BYPASS_XSC    MFP_CFG(GPIO7, AF7)
+#define GPIO17_EXT_SYNC_MVT_0   MFP_CFG(GPIO17, AF6)
+#define GPIO18_EXT_SYNC_MVT_1   MFP_CFG(GPIO18, AF6)
+#define GPIO19_OST_CHOUT_MVT_0  MFP_CFG(GPIO19, AF6)
+#define GPIO20_OST_CHOUT_MVT_1  MFP_CFG(GPIO20, AF6)
+#define GPIO49_48M_CLK          MFP_CFG(GPIO49, AF2)
+#define GPIO126_EXT_CLK         MFP_CFG(GPIO126, AF3)
+#define GPIO127_CLK_BYPASS_GB   MFP_CFG(GPIO127, AF7)
+#define GPIO71_EXT_MATCH_MVT    MFP_CFG(GPIO71, AF6)
+
+#define GPIO3_uIO_IN            MFP_CFG(GPIO3, AF1)
+
+#define GPIO4_uSIM_CARD_STATE   MFP_CFG(GPIO4, AF1)
+#define GPIO5_uSIM_uCLK         MFP_CFG(GPIO5, AF1)
+#define GPIO6_uSIM_uRST         MFP_CFG(GPIO6, AF1)
+#define GPIO16_uSIM_UVS_0       MFP_CFG(GPIO16, AF1)
+
+#define GPIO9_SCIO              MFP_CFG(GPIO9, AF1)
+#define GPIO20_RTC_MVT          MFP_CFG(GPIO20, AF4)
+#define GPIO126_RTC_MVT         MFP_CFG(GPIO126, AF1)
+
+/*
+ * PXA300 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA300
+#define GPIO99_USB_P2_2         MFP_CFG(GPIO99, AF2)
+#define GPIO99_USB_P2_5         MFP_CFG(GPIO99, AF3)
+#define GPIO99_USB_P2_6         MFP_CFG(GPIO99, AF4)
+#define GPIO100_USB_P2_2        MFP_CFG(GPIO100, AF4)
+#define GPIO100_USB_P2_5        MFP_CFG(GPIO100, AF5)
+#define GPIO101_USB_P2_1        MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_4        MFP_CFG(GPIO102, AF2)
+#define GPIO104_USB_P2_3        MFP_CFG(GPIO104, AF2)
+#define GPIO105_USB_P2_5        MFP_CFG(GPIO105, AF2)
+#define GPIO100_USB_P2_6        MFP_CFG(GPIO100, AF2)
+#define GPIO106_USB_P2_7        MFP_CFG(GPIO106, AF2)
+#define GPIO103_USB_P2_8        MFP_CFG(GPIO103, AF2)
+
+/* U2D UTMI */
+#define GPIO38_UTM_CLK          MFP_CFG(GPIO38,  AF1)
+#define GPIO26_U2D_RXERROR      MFP_CFG(GPIO26,  AF3)
+#define GPIO50_U2D_RXERROR      MFP_CFG(GPIO50,  AF1)
+#define GPIO89_U2D_RXERROR      MFP_CFG(GPIO89,  AF5)
+#define GPIO24_UTM_RXVALID      MFP_CFG(GPIO24,  AF3)
+#define GPIO48_UTM_RXVALID      MFP_CFG(GPIO48,  AF2)
+#define GPIO87_UTM_RXVALID      MFP_CFG(GPIO87,  AF5)
+#define GPIO25_UTM_RXACTIVE     MFP_CFG(GPIO25,  AF3)
+#define GPIO47_UTM_RXACTIVE     MFP_CFG(GPIO47,  AF2)
+#define GPIO49_UTM_RXACTIVE     MFP_CFG(GPIO49,  AF1)
+#define GPIO88_UTM_RXACTIVE     MFP_CFG(GPIO88,  AF5)
+#define GPIO53_UTM_TXREADY      MFP_CFG(GPIO53,  AF1)
+#define GPIO67_UTM_LINESTATE_0  MFP_CFG(GPIO67,  AF3)
+#define GPIO92_UTM_LINESTATE_0  MFP_CFG(GPIO92,  AF3)
+#define GPIO104_UTM_LINESTATE_0 MFP_CFG(GPIO104, AF3)
+#define GPIO109_UTM_LINESTATE_0 MFP_CFG(GPIO109, AF4)
+#define GPIO68_UTM_LINESTATE_1  MFP_CFG(GPIO68,  AF3)
+#define GPIO93_UTM_LINESTATE_1  MFP_CFG(GPIO93,  AF3)
+#define GPIO105_UTM_LINESTATE_1 MFP_CFG(GPIO105, AF3)
+#define GPIO27_U2D_OPMODE_0     MFP_CFG(GPIO27,  AF4)
+#define GPIO51_U2D_OPMODE_0     MFP_CFG(GPIO51,  AF2)
+#define GPIO90_U2D_OPMODE_0     MFP_CFG(GPIO90,  AF7)
+#define GPIO28_U2D_OPMODE_1     MFP_CFG(GPIO28,  AF4)
+#define GPIO52_U2D_OPMODE_1     MFP_CFG(GPIO52,  AF2)
+#define GPIO106_U2D_OPMODE_1    MFP_CFG(GPIO106, AF3)
+#define GPIO110_U2D_OPMODE_1    MFP_CFG(GPIO110, AF5)
+#define GPIO76_U2D_RESET        MFP_CFG(GPIO76,  AF1)
+#define GPIO95_U2D_RESET        MFP_CFG(GPIO95,  AF2)
+#define GPIO100_U2D_RESET       MFP_CFG(GPIO100, AF3)
+#define GPIO66_U2D_SUSPEND      MFP_CFG(GPIO66,  AF3)
+#define GPIO98_U2D_SUSPEND      MFP_CFG(GPIO98,  AF2)
+#define GPIO103_U2D_SUSPEND     MFP_CFG(GPIO103, AF3)
+#define GPIO65_U2D_TERM_SEL     MFP_CFG(GPIO65,  AF5)
+#define GPIO97_U2D_TERM_SEL     MFP_CFG(GPIO97,  AF3)
+#define GPIO102_U2D_TERM_SEL    MFP_CFG(GPIO102, AF5)
+#define GPIO29_U2D_TXVALID      MFP_CFG(GPIO29,  AF3)
+#define GPIO52_U2D_TXVALID      MFP_CFG(GPIO52,  AF4)
+#define GPIO69_U2D_TXVALID      MFP_CFG(GPIO69,  AF3)
+#define GPIO85_U2D_TXVALID      MFP_CFG(GPIO85,  AF7)
+#define GPIO64_U2D_XCVR_SEL     MFP_CFG(GPIO64,  AF5)
+#define GPIO96_U2D_XCVR_SEL     MFP_CFG(GPIO96,  AF3)
+#define GPIO101_U2D_XCVR_SEL    MFP_CFG(GPIO101, AF5)
+#define GPIO30_UTM_PHYDATA_0    MFP_CFG(GPIO30,  AF3)
+#define GPIO31_UTM_PHYDATA_1    MFP_CFG(GPIO31,  AF3)
+#define GPIO32_UTM_PHYDATA_2    MFP_CFG(GPIO32,  AF3)
+#define GPIO33_UTM_PHYDATA_3    MFP_CFG(GPIO33,  AF3)
+#define GPIO34_UTM_PHYDATA_4    MFP_CFG(GPIO34,  AF3)
+#define GPIO35_UTM_PHYDATA_5    MFP_CFG(GPIO35,  AF3)
+#define GPIO36_UTM_PHYDATA_6    MFP_CFG(GPIO36,  AF3)
+#define GPIO37_UTM_PHYDATA_7    MFP_CFG(GPIO37,  AF3)
+#define GPIO39_UTM_PHYDATA_0    MFP_CFG(GPIO39,  AF3)
+#define GPIO40_UTM_PHYDATA_1    MFP_CFG(GPIO40,  AF3)
+#define GPIO41_UTM_PHYDATA_2    MFP_CFG(GPIO41,  AF3)
+#define GPIO42_UTM_PHYDATA_3    MFP_CFG(GPIO42,  AF3)
+#define GPIO43_UTM_PHYDATA_4    MFP_CFG(GPIO43,  AF3)
+#define GPIO44_UTM_PHYDATA_5    MFP_CFG(GPIO44,  AF3)
+#define GPIO45_UTM_PHYDATA_6    MFP_CFG(GPIO45,  AF3)
+#define GPIO46_UTM_PHYDATA_7    MFP_CFG(GPIO46,  AF3)
+#endif /* CONFIG_CPU_PXA300 */
+
+/*
+ * PXA310 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA310
+/* USB P2 */
+#define GPIO36_USB_P2_1         MFP_CFG(GPIO36, AF1)
+#define GPIO30_USB_P2_2         MFP_CFG(GPIO30, AF1)
+#define GPIO35_USB_P2_3         MFP_CFG(GPIO35, AF1)
+#define GPIO32_USB_P2_4         MFP_CFG(GPIO32, AF1)
+#define GPIO34_USB_P2_5         MFP_CFG(GPIO34, AF1)
+#define GPIO31_USB_P2_6         MFP_CFG(GPIO31, AF1)
+
+/* MMC1 */
+#define GPIO24_MMC1_CMD         MFP_CFG(GPIO24, AF3)
+#define GPIO29_MMC1_DAT0        MFP_CFG(GPIO29, AF3)
+
+/* MMC3 */
+#define GPIO103_MMC3_CLK        MFP_CFG(GPIO103, AF2)
+#define GPIO105_MMC3_CMD        MFP_CFG(GPIO105, AF2)
+#define GPIO11_2_MMC3_CLK       MFP_CFG(GPIO11_2, AF1)
+#define GPIO12_2_MMC3_CMD       MFP_CFG(GPIO12_2, AF1)
+#define GPIO7_2_MMC3_DAT0       MFP_CFG(GPIO7_2, AF1)
+#define GPIO8_2_MMC3_DAT1       MFP_CFG(GPIO8_2, AF1)
+#define GPIO9_2_MMC3_DAT2       MFP_CFG(GPIO9_2, AF1)
+#define GPIO10_2_MMC3_DAT3      MFP_CFG(GPIO10_2, AF1)
+
+/* ULPI */
+#define GPIO38_ULPI_CLK         MFP_CFG(GPIO38, AF1)
+#define GPIO30_ULPI_DATA_OUT_0  MFP_CFG(GPIO30, AF3)
+#define GPIO31_ULPI_DATA_OUT_1  MFP_CFG(GPIO31, AF3)
+#define GPIO32_ULPI_DATA_OUT_2  MFP_CFG(GPIO32, AF3)
+#define GPIO33_ULPI_DATA_OUT_3  MFP_CFG(GPIO33, AF3)
+#define GPIO34_ULPI_DATA_OUT_4  MFP_CFG(GPIO34, AF3)
+#define GPIO35_ULPI_DATA_OUT_5  MFP_CFG(GPIO35, AF3)
+#define GPIO36_ULPI_DATA_OUT_6  MFP_CFG(GPIO36, AF3)
+#define GPIO37_ULPI_DATA_OUT_7  MFP_CFG(GPIO37, AF3)
+#define GPIO33_ULPI_OTG_INTR    MFP_CFG(GPIO33, AF1)
+
+#define ULPI_DIR        MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
+#define ULPI_NXT        MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
+#define ULPI_STP        MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#endif /* CONFIG_CPU_PXA310 */
+
+#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
new file mode 100644
index 000000000000..74990510cf34
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -0,0 +1,447 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+ *
+ * PXA320 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA320_H
+#define __ASM_ARCH_MFP_PXA320_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO             MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO             MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO             MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO             MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO             MFP_CFG(GPIO52, AF0)
+
+#define GPIO7_2_GPIO            MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO            MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO            MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO           MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO           MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO           MFP_CFG(GPIO12_2, AF0)
+#define GPIO13_2_GPIO           MFP_CFG(GPIO13_2, AF0)
+#define GPIO14_2_GPIO           MFP_CFG(GPIO14_2, AF0)
+#define GPIO15_2_GPIO           MFP_CFG(GPIO15_2, AF0)
+#define GPIO16_2_GPIO           MFP_CFG(GPIO16_2, AF0)
+#define GPIO17_2_GPIO           MFP_CFG(GPIO17_2, AF0)
+
+/* Chip Select */
+#define GPIO4_nCS3              MFP_CFG(GPIO4, AF1)
+
+/* AC97 */
+#define GPIO34_AC97_SYSCLK      MFP_CFG(GPIO34, AF1)
+#define GPIO39_AC97_BITCLK      MFP_CFG(GPIO39, AF1)
+#define GPIO40_AC97_nACRESET    MFP_CFG(GPIO40, AF1)
+#define GPIO35_AC97_SDATA_IN_0  MFP_CFG(GPIO35, AF1)
+#define GPIO36_AC97_SDATA_IN_1  MFP_CFG(GPIO36, AF1)
+#define GPIO32_AC97_SDATA_IN_2  MFP_CFG(GPIO32, AF2)
+#define GPIO33_AC97_SDATA_IN_3  MFP_CFG(GPIO33, AF2)
+#define GPIO11_AC97_SDATA_IN_2  MFP_CFG(GPIO11, AF3)
+#define GPIO12_AC97_SDATA_IN_3  MFP_CFG(GPIO12, AF3)
+#define GPIO37_AC97_SDATA_OUT   MFP_CFG(GPIO37, AF1)
+#define GPIO38_AC97_SYNC        MFP_CFG(GPIO38, AF1)
+
+/* I2C */
+#define GPIO32_I2C_SCL          MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
+#define GPIO33_I2C_SDA          MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO49_CI_DD_0          MFP_CFG_DRV(GPIO49, AF1, DS04X)
+#define GPIO50_CI_DD_1          MFP_CFG_DRV(GPIO50, AF1, DS04X)
+#define GPIO51_CI_DD_2          MFP_CFG_DRV(GPIO51, AF1, DS04X)
+#define GPIO52_CI_DD_3          MFP_CFG_DRV(GPIO52, AF1, DS04X)
+#define GPIO53_CI_DD_4          MFP_CFG_DRV(GPIO53, AF1, DS04X)
+#define GPIO54_CI_DD_5          MFP_CFG_DRV(GPIO54, AF1, DS04X)
+#define GPIO55_CI_DD_6          MFP_CFG_DRV(GPIO55, AF1, DS04X)
+#define GPIO56_CI_DD_7          MFP_CFG_DRV(GPIO56, AF0, DS04X)
+#define GPIO57_CI_DD_8          MFP_CFG_DRV(GPIO57, AF1, DS04X)
+#define GPIO58_CI_DD_9          MFP_CFG_DRV(GPIO58, AF1, DS04X)
+#define GPIO59_CI_MCLK          MFP_CFG_DRV(GPIO59, AF0, DS04X)
+#define GPIO60_CI_PCLK          MFP_CFG_DRV(GPIO60, AF0, DS04X)
+#define GPIO61_CI_HSYNC         MFP_CFG_DRV(GPIO61, AF0, DS04X)
+#define GPIO62_CI_VSYNC         MFP_CFG_DRV(GPIO62, AF0, DS04X)
+
+#define GPIO31_CIR_OUT          MFP_CFG(GPIO31, AF5)
+
+#define GPIO0_2_CLK_EXT         MFP_CFG(GPIO0_2, AF3)
+#define GPIO0_DRQ               MFP_CFG(GPIO0, AF2)
+#define GPIO11_EXT_SYNC0        MFP_CFG(GPIO11, AF5)
+#define GPIO12_EXT_SYNC1        MFP_CFG(GPIO12, AF6)
+#define GPIO0_2_HZ_CLK          MFP_CFG(GPIO0_2, AF1)
+#define GPIO14_HZ_CLK           MFP_CFG(GPIO14, AF4)
+#define GPIO30_ICP_RXD          MFP_CFG(GPIO30, AF1)
+#define GPIO31_ICP_TXD          MFP_CFG(GPIO31, AF1)
+
+#define GPIO83_KP_DKIN_0        MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO84_KP_DKIN_1        MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO85_KP_DKIN_2        MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_3        MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+
+#define GPIO105_KP_DKIN_0       MFP_CFG_LPM(GPIO105, AF2, FLOAT)
+#define GPIO106_KP_DKIN_1       MFP_CFG_LPM(GPIO106, AF2, FLOAT)
+#define GPIO107_KP_DKIN_2       MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_3       MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_4       MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_5       MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_6       MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_7       MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+
+#define GPIO113_KP_DKIN_0       MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_1       MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_2       MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_3       MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_4       MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_5       MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_6       MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_7       MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+
+#define GPIO127_KP_DKIN_0       MFP_CFG_LPM(GPIO127, AF2, FLOAT)
+#define GPIO126_KP_DKIN_1       MFP_CFG_LPM(GPIO126, AF2, FLOAT)
+
+#define GPIO2_2_KP_DKIN_0       MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_1       MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO125_KP_DKIN_2       MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3       MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4       MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5       MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6       MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_7       MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+
+#define GPIO113_KP_MKIN_0       MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+#define GPIO114_KP_MKIN_1       MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+#define GPIO115_KP_MKIN_2       MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_3       MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_4       MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_5       MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_6       MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_7       MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+
+#define GPIO83_KP_MKOUT_0       MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO84_KP_MKOUT_1       MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_2       MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_3       MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_4       MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO14_KP_MKOUT_5       MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
+
+#define GPIO121_KP_MKOUT_0      MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1      MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2      MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3      MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4      MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_5      MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
+#define GPIO127_KP_MKOUT_6      MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_7      MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO6_2_LCD_LDD_0       MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
+#define GPIO7_2_LCD_LDD_1       MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
+#define GPIO8_2_LCD_LDD_2       MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
+#define GPIO9_2_LCD_LDD_3       MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
+#define GPIO10_2_LCD_LDD_4      MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
+#define GPIO11_2_LCD_LDD_5      MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
+#define GPIO12_2_LCD_LDD_6      MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
+#define GPIO13_2_LCD_LDD_7      MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
+#define GPIO63_LCD_LDD_8        MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_9        MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_10       MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_11       MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_12       MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_13       MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_14       MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_15       MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_16       MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO72_LCD_LDD_17       MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_CS_N         MFP_CFG_DRV(GPIO73, AF2, DS01X)
+#define GPIO74_LCD_VSYNC        MFP_CFG_DRV(GPIO74, AF2, DS01X)
+#define GPIO14_2_LCD_FCLK       MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
+#define GPIO15_2_LCD_LCLK       MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
+#define GPIO16_2_LCD_PCLK       MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
+#define GPIO17_2_LCD_BIAS       MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
+#define GPIO64_LCD_VSYNC        MFP_CFG_DRV(GPIO64, AF2, DS01X)
+#define GPIO63_LCD_CS_N         MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+#define GPIO6_2_MLCD_DD_0       MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
+#define GPIO7_2_MLCD_DD_1       MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
+#define GPIO8_2_MLCD_DD_2       MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
+#define GPIO9_2_MLCD_DD_3       MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
+#define GPIO10_2_MLCD_DD_4      MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
+#define GPIO11_2_MLCD_DD_5      MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
+#define GPIO12_2_MLCD_DD_6      MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
+#define GPIO13_2_MLCD_DD_7      MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
+#define GPIO63_MLCD_DD_8        MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_DD_9        MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_DD_10       MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_DD_11       MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_DD_12       MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_DD_13       MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_DD_14       MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO70_MLCD_DD_15       MFP_CFG_DRV(GPIO70, AF7, DS08X)
+#define GPIO71_MLCD_DD_16       MFP_CFG_DRV(GPIO71, AF7, DS08X)
+#define GPIO72_MLCD_DD_17       MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_CS          MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO74_MLCD_VSYNC       MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO14_2_MLCD_FCLK      MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
+#define GPIO15_2_MLCD_LCLK      MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
+#define GPIO16_2_MLCD_PCLK      MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
+#define GPIO17_2_MLCD_BIAS      MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
+
+/* MMC1 */
+#define GPIO9_MMC1_CMD          MFP_CFG_LPM(GPIO9,  AF4, DRIVE_HIGH)
+#define GPIO22_MMC1_CLK         MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
+#define GPIO23_MMC1_CMD         MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
+#define GPIO30_MMC1_CLK         MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
+#define GPIO31_MMC1_CMD         MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT0         MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT1         MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+#define GPIO7_MMC1_DAT2         MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_DAT3         MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO18_MMC1_DAT0        MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
+#define GPIO19_MMC1_DAT1        MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
+#define GPIO20_MMC1_DAT2        MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
+#define GPIO21_MMC1_DAT3        MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
+
+#define GPIO28_MMC2_CLK         MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
+#define GPIO29_MMC2_CMD         MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
+#define GPIO30_MMC2_CLK         MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
+#define GPIO31_MMC2_CMD         MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
+#define GPIO79_MMC2_CLK         MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_CMD         MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+
+#define GPIO5_MMC2_DAT0         MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
+#define GPIO6_MMC2_DAT1         MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
+#define GPIO7_MMC2_DAT2         MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
+#define GPIO8_MMC2_DAT3         MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
+#define GPIO24_MMC2_DAT0        MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
+#define GPIO75_MMC2_DAT0        MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
+#define GPIO25_MMC2_DAT1        MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
+#define GPIO76_MMC2_DAT1        MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
+#define GPIO26_MMC2_DAT2        MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT2        MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO27_MMC2_DAT3        MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT3        MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+
+/* 1-Wire */
+#define GPIO14_ONE_WIRE         MFP_CFG_LPM(GPIO14,  AF5, FLOAT)
+#define GPIO0_2_ONE_WIRE        MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+
+/* SSP1 */
+#define GPIO87_SSP1_EXTCLK      MFP_CFG(GPIO87, AF1)
+#define GPIO88_SSP1_SYSCLK      MFP_CFG(GPIO88, AF1)
+#define GPIO83_SSP1_SCLK        MFP_CFG(GPIO83, AF1)
+#define GPIO84_SSP1_SFRM        MFP_CFG(GPIO84, AF1)
+#define GPIO85_SSP1_RXD         MFP_CFG(GPIO85, AF6)
+#define GPIO85_SSP1_TXD         MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_RXD         MFP_CFG(GPIO86, AF1)
+#define GPIO86_SSP1_TXD         MFP_CFG(GPIO86, AF6)
+
+/* SSP2 */
+#define GPIO39_SSP2_EXTCLK      MFP_CFG(GPIO39, AF2)
+#define GPIO40_SSP2_SYSCLK      MFP_CFG(GPIO40, AF2)
+#define GPIO12_SSP2_SCLK        MFP_CFG(GPIO12, AF2)
+#define GPIO35_SSP2_SCLK        MFP_CFG(GPIO35, AF2)
+#define GPIO36_SSP2_SFRM        MFP_CFG(GPIO36, AF2)
+#define GPIO37_SSP2_RXD         MFP_CFG(GPIO37, AF5)
+#define GPIO37_SSP2_TXD         MFP_CFG(GPIO37, AF2)
+#define GPIO38_SSP2_RXD         MFP_CFG(GPIO38, AF2)
+#define GPIO38_SSP2_TXD         MFP_CFG(GPIO38, AF5)
+
+#define GPIO69_SSP3_SCLK        MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM         MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK        MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM         MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD         MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD         MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
+#define GPIO72_SSP3_RXD         MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
+#define GPIO72_SSP3_TXD         MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_RXD         MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
+#define GPIO91_SSP3_TXD         MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
+#define GPIO92_SSP3_RXD         MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
+#define GPIO92_SSP3_TXD         MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
+
+#define GPIO93_SSP4_SCLK        MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
+#define GPIO94_SSP4_FRM         MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
+#define GPIO94_SSP4_RXD         MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
+#define GPIO95_SSP4_RXD         MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
+#define GPIO95_SSP4_TXD         MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_RXD         MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO96_SSP4_TXD         MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
+
+/* UART1 */
+#define GPIO41_UART1_RXD        MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO41_UART1_TXD        MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_UART1_RXD        MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+#define GPIO42_UART1_TXD        MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO97_UART1_RXD        MFP_CFG_LPM(GPIO97, AF1, FLOAT)
+#define GPIO97_UART1_TXD        MFP_CFG_LPM(GPIO97, AF6, FLOAT)
+#define GPIO98_UART1_RXD        MFP_CFG_LPM(GPIO98, AF6, FLOAT)
+#define GPIO98_UART1_TXD        MFP_CFG_LPM(GPIO98, AF1, FLOAT)
+#define GPIO43_UART1_CTS        MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO43_UART1_RTS        MFP_CFG_LPM(GPIO43, AF4, FLOAT)
+#define GPIO48_UART1_CTS        MFP_CFG_LPM(GPIO48, AF4, FLOAT)
+#define GPIO48_UART1_RTS        MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO99_UART1_CTS        MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO99_UART1_RTS        MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO104_UART1_CTS       MFP_CFG_LPM(GPIO104, AF6, FLOAT)
+#define GPIO104_UART1_RTS       MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+#define GPIO45_UART1_DTR        MFP_CFG_LPM(GPIO45, AF4, FLOAT)
+#define GPIO45_UART1_DSR        MFP_CFG_LPM(GPIO45, AF2, FLOAT)
+#define GPIO47_UART1_DTR        MFP_CFG_LPM(GPIO47, AF2, FLOAT)
+#define GPIO47_UART1_DSR        MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO101_UART1_DTR       MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO101_UART1_DSR       MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO103_UART1_DTR       MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO103_UART1_DSR       MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO44_UART1_DCD        MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO100_UART1_DCD       MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO46_UART1_RI         MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO102_UART1_RI        MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+/* UART2 */
+#define GPIO109_UART2_CTS       MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO109_UART2_RTS       MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO112_UART2_CTS       MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO112_UART2_RTS       MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO110_UART2_RXD       MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+#define GPIO110_UART2_TXD       MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+#define GPIO111_UART2_RXD       MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO111_UART2_TXD       MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO89_UART3_CTS        MFP_CFG_LPM(GPIO89, AF2, FLOAT)
+#define GPIO89_UART3_RTS        MFP_CFG_LPM(GPIO89, AF4, FLOAT)
+#define GPIO90_UART3_CTS        MFP_CFG_LPM(GPIO90, AF4, FLOAT)
+#define GPIO90_UART3_RTS        MFP_CFG_LPM(GPIO90, AF2, FLOAT)
+#define GPIO105_UART3_CTS       MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+#define GPIO105_UART3_RTS       MFP_CFG_LPM(GPIO105, AF3, FLOAT)
+#define GPIO106_UART3_CTS       MFP_CFG_LPM(GPIO106, AF3, FLOAT)
+#define GPIO106_UART3_RTS       MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+#define GPIO30_UART3_RXD        MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO30_UART3_TXD        MFP_CFG_LPM(GPIO30, AF6, FLOAT)
+#define GPIO31_UART3_RXD        MFP_CFG_LPM(GPIO31, AF6, FLOAT)
+#define GPIO31_UART3_TXD        MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO91_UART3_RXD        MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO91_UART3_TXD        MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_RXD        MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO92_UART3_TXD        MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_RXD       MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO107_UART3_TXD       MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_RXD       MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+#define GPIO108_UART3_TXD       MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+
+/* USB 2.0 UTMI */
+#define GPIO10_UTM_CLK          MFP_CFG(GPIO10, AF1)
+#define GPIO36_U2D_RXERROR      MFP_CFG(GPIO36, AF3)
+#define GPIO60_U2D_RXERROR      MFP_CFG(GPIO60, AF1)
+#define GPIO87_U2D_RXERROR      MFP_CFG(GPIO87, AF5)
+#define GPIO34_UTM_RXVALID      MFP_CFG(GPIO34, AF3)
+#define GPIO58_UTM_RXVALID      MFP_CFG(GPIO58, AF2)
+#define GPIO85_UTM_RXVALID      MFP_CFG(GPIO85, AF5)
+#define GPIO35_UTM_RXACTIVE     MFP_CFG(GPIO35, AF3)
+#define GPIO59_UTM_RXACTIVE     MFP_CFG(GPIO59, AF1)
+#define GPIO86_UTM_RXACTIVE     MFP_CFG(GPIO86, AF5)
+#define GPIO73_UTM_TXREADY      MFP_CFG(GPIO73, AF1)
+#define GPIO68_UTM_LINESTATE_0  MFP_CFG(GPIO68, AF3)
+#define GPIO90_UTM_LINESTATE_0  MFP_CFG(GPIO90, AF3)
+#define GPIO102_UTM_LINESTATE_0 MFP_CFG(GPIO102, AF3)
+#define GPIO107_UTM_LINESTATE_0 MFP_CFG(GPIO107, AF4)
+#define GPIO69_UTM_LINESTATE_1  MFP_CFG(GPIO69, AF3)
+#define GPIO91_UTM_LINESTATE_1  MFP_CFG(GPIO91, AF3)
+#define GPIO103_UTM_LINESTATE_1 MFP_CFG(GPIO103, AF3)
+
+#define GPIO41_U2D_PHYDATA_0    MFP_CFG(GPIO41, AF3)
+#define GPIO42_U2D_PHYDATA_1    MFP_CFG(GPIO42, AF3)
+#define GPIO43_U2D_PHYDATA_2    MFP_CFG(GPIO43, AF3)
+#define GPIO44_U2D_PHYDATA_3    MFP_CFG(GPIO44, AF3)
+#define GPIO45_U2D_PHYDATA_4    MFP_CFG(GPIO45, AF3)
+#define GPIO46_U2D_PHYDATA_5    MFP_CFG(GPIO46, AF3)
+#define GPIO47_U2D_PHYDATA_6    MFP_CFG(GPIO47, AF3)
+#define GPIO48_U2D_PHYDATA_7    MFP_CFG(GPIO48, AF3)
+
+#define GPIO49_U2D_PHYDATA_0    MFP_CFG(GPIO49, AF3)
+#define GPIO50_U2D_PHYDATA_1    MFP_CFG(GPIO50, AF3)
+#define GPIO51_U2D_PHYDATA_2    MFP_CFG(GPIO51, AF3)
+#define GPIO52_U2D_PHYDATA_3    MFP_CFG(GPIO52, AF3)
+#define GPIO53_U2D_PHYDATA_4    MFP_CFG(GPIO53, AF3)
+#define GPIO54_U2D_PHYDATA_5    MFP_CFG(GPIO54, AF3)
+#define GPIO55_U2D_PHYDATA_6    MFP_CFG(GPIO55, AF3)
+#define GPIO56_U2D_PHYDATA_7    MFP_CFG(GPIO56, AF3)
+
+#define GPIO37_U2D_OPMODE0      MFP_CFG(GPIO37, AF4)
+#define GPIO61_U2D_OPMODE0      MFP_CFG(GPIO61, AF2)
+#define GPIO88_U2D_OPMODE0      MFP_CFG(GPIO88, AF7)
+
+#define GPIO38_U2D_OPMODE1      MFP_CFG(GPIO38, AF4)
+#define GPIO62_U2D_OPMODE1      MFP_CFG(GPIO62, AF2)
+#define GPIO104_U2D_OPMODE1     MFP_CFG(GPIO104, AF4)
+#define GPIO108_U2D_OPMODE1     MFP_CFG(GPIO108, AF5)
+
+#define GPIO74_U2D_RESET        MFP_CFG(GPIO74, AF1)
+#define GPIO93_U2D_RESET        MFP_CFG(GPIO93, AF2)
+#define GPIO98_U2D_RESET        MFP_CFG(GPIO98, AF3)
+
+#define GPIO67_U2D_SUSPEND      MFP_CFG(GPIO67, AF3)
+#define GPIO96_U2D_SUSPEND      MFP_CFG(GPIO96, AF2)
+#define GPIO101_U2D_SUSPEND     MFP_CFG(GPIO101, AF3)
+
+#define GPIO66_U2D_TERM_SEL     MFP_CFG(GPIO66, AF5)
+#define GPIO95_U2D_TERM_SEL     MFP_CFG(GPIO95, AF3)
+#define GPIO97_U2D_TERM_SEL     MFP_CFG(GPIO97, AF7)
+#define GPIO100_U2D_TERM_SEL    MFP_CFG(GPIO100, AF5)
+
+#define GPIO39_U2D_TXVALID      MFP_CFG(GPIO39, AF4)
+#define GPIO70_U2D_TXVALID      MFP_CFG(GPIO70, AF5)
+#define GPIO83_U2D_TXVALID      MFP_CFG(GPIO83, AF7)
+
+#define GPIO65_U2D_XCVR_SEL     MFP_CFG(GPIO65, AF5)
+#define GPIO94_U2D_XCVR_SEL     MFP_CFG(GPIO94, AF3)
+#define GPIO99_U2D_XCVR_SEL     MFP_CFG(GPIO99, AF5)
+
+/* USB Host 1.1 */
+#define GPIO2_2_USBH_PEN        MFP_CFG(GPIO2_2, AF1)
+#define GPIO3_2_USBH_PWR        MFP_CFG(GPIO3_2, AF1)
+
+/* USB P2 */
+#define GPIO97_USB_P2_2         MFP_CFG(GPIO97, AF2)
+#define GPIO97_USB_P2_6         MFP_CFG(GPIO97, AF4)
+#define GPIO98_USB_P2_2         MFP_CFG(GPIO98, AF4)
+#define GPIO98_USB_P2_6         MFP_CFG(GPIO98, AF2)
+#define GPIO99_USB_P2_1         MFP_CFG(GPIO99, AF2)
+#define GPIO100_USB_P2_4        MFP_CFG(GPIO100, AF2)
+#define GPIO101_USB_P2_8        MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_3        MFP_CFG(GPIO102, AF2)
+#define GPIO103_USB_P2_5        MFP_CFG(GPIO103, AF2)
+#define GPIO104_USB_P2_7        MFP_CFG(GPIO104, AF2)
+
+/* USB P3 */
+#define GPIO75_USB_P3_1         MFP_CFG(GPIO75, AF2)
+#define GPIO76_USB_P3_2         MFP_CFG(GPIO76, AF2)
+#define GPIO77_USB_P3_3         MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_4         MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_5         MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_6         MFP_CFG(GPIO80, AF2)
+
+#define GPIO13_CHOUT0           MFP_CFG(GPIO13, AF6)
+#define GPIO14_CHOUT1           MFP_CFG(GPIO14, AF6)
+
+#define GPIO2_RDY               MFP_CFG(GPIO2, AF1)
+#define GPIO5_NPIOR             MFP_CFG(GPIO5, AF3)
+
+#define GPIO11_PWM0_OUT         MFP_CFG(GPIO11, AF1)
+#define GPIO12_PWM1_OUT         MFP_CFG(GPIO12, AF1)
+#define GPIO13_PWM2_OUT         MFP_CFG(GPIO13, AF1)
+#define GPIO14_PWM3_OUT         MFP_CFG(GPIO14, AF1)
+
+#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
new file mode 100644
index 000000000000..1f6b35c015d0
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
@@ -0,0 +1,252 @@
+#ifndef __ASM_ARCH_MFP_PXA3XX_H
+#define __ASM_ARCH_MFP_PXA3XX_H
+
+#define MFPR_BASE       (0x40e10000)
+#define MFPR_SIZE       (PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL           (0x1 << 15)
+#define MFPR_PULLUP_EN          (0x1 << 14)
+#define MFPR_PULLDOWN_EN        (0x1 << 13)
+#define MFPR_SLEEP_SEL          (0x1 << 9)
+#define MFPR_SLEEP_OE_N         (0x1 << 7)
+#define MFPR_EDGE_CLEAR         (0x1 << 6)
+#define MFPR_EDGE_FALL_EN       (0x1 << 5)
+#define MFPR_EDGE_RISE_EN       (0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x)      ((x) << 8)
+#define MFPR_DRIVE(x)           (((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x)          (((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE          (0)
+#define MFPR_EDGE_RISE          (MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL          (MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH          (MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0          0
+ * Pull hi (1)      1          X(1)        1           0          0
+ * Pull lo (0)      1          X(0)        0           1          0
+ * Z (float)        1          X(0)        0           0          0
+ */
+#define MFPR_LPM_INPUT          (0)
+#define MFPR_LPM_DRIVE_LOW      (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH     (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW       (MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH      (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT          (MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK           (0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior,  the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition       pull_sel  pullup_en  pulldown_en
+ * MFPR_PULL_NONE       0         0        0
+ * MFPR_PULL_LOW        1         0        1
+ * MFPR_PULL_HIGH       1         1        0
+ * MFPR_PULL_BOTH       1         1        1
+ */
+#define MFPR_PULL_NONE          (0)
+#define MFPR_PULL_LOW           (MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH          (MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH          (MFPR_PULL_SEL | MFPR_PULLUP_EN)
+
+/* PXA3xx common MFP configurations - processor specific ones defined
+ * in mfp-pxa300.h and mfp-pxa320.h
+ */
+#define GPIO0_GPIO              MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO              MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO              MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO              MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO              MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO              MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO              MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO              MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO              MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO              MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO             MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO             MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO             MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO             MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO             MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO             MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO             MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO             MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO             MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO             MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO             MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO             MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO             MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO             MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO             MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO             MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO             MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO             MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO             MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO             MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO             MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO             MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO             MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO             MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO             MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO             MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO             MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO             MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO             MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO             MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO             MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO             MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO             MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO             MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO             MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO             MFP_CFG(GPIO45, AF0)
+
+#define GPIO47_GPIO             MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO             MFP_CFG(GPIO48, AF0)
+
+#define GPIO53_GPIO             MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO             MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO             MFP_CFG(GPIO55, AF0)
+
+#define GPIO57_GPIO             MFP_CFG(GPIO57, AF0)
+
+#define GPIO63_GPIO             MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO             MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO             MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO             MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO             MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO             MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO             MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO             MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO             MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO             MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO             MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO             MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO             MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO             MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO             MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO             MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO             MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO             MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO             MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO             MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO             MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO             MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO             MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO             MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO             MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO             MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO             MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO             MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO             MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO             MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO             MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO             MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO             MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO             MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO             MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO             MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO             MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO            MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO            MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO            MFP_CFG(GPIO102, AF0)
+#define GPIO103_GPIO            MFP_CFG(GPIO103, AF0)
+#define GPIO104_GPIO            MFP_CFG(GPIO104, AF0)
+#define GPIO105_GPIO            MFP_CFG(GPIO105, AF0)
+#define GPIO106_GPIO            MFP_CFG(GPIO106, AF0)
+#define GPIO107_GPIO            MFP_CFG(GPIO107, AF0)
+#define GPIO108_GPIO            MFP_CFG(GPIO108, AF0)
+#define GPIO109_GPIO            MFP_CFG(GPIO109, AF0)
+#define GPIO110_GPIO            MFP_CFG(GPIO110, AF0)
+#define GPIO111_GPIO            MFP_CFG(GPIO111, AF0)
+#define GPIO112_GPIO            MFP_CFG(GPIO112, AF0)
+#define GPIO113_GPIO            MFP_CFG(GPIO113, AF0)
+#define GPIO114_GPIO            MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO            MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO            MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO            MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO            MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO            MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO            MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO            MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO            MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO            MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO            MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO            MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO            MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO            MFP_CFG(GPIO127, AF0)
+
+#define GPIO0_2_GPIO            MFP_CFG(GPIO0_2, AF0)
+#define GPIO1_2_GPIO            MFP_CFG(GPIO1_2, AF0)
+#define GPIO2_2_GPIO            MFP_CFG(GPIO2_2, AF0)
+#define GPIO3_2_GPIO            MFP_CFG(GPIO3_2, AF0)
+#define GPIO4_2_GPIO            MFP_CFG(GPIO4_2, AF0)
+#define GPIO5_2_GPIO            MFP_CFG(GPIO5_2, AF0)
+#define GPIO6_2_GPIO            MFP_CFG(GPIO6_2, AF0)
+
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by pxa3xx_mfp_init_addr()
+ *
+ * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
+ * structure, which represents a range of MFP pins from "start" to
+ * "end", with the offset begining at "offset", to define a single
+ * pin, let "end" = -1
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR()   to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct pxa3xx_mfp_addr_map {
+        unsigned int    start;
+        unsigned int    end;
+        unsigned long   offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+        { MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+        { MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END    { MFP_PIN_INVALID, 0 }
+
+/*
+ * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
+ * to the MFPR register
+ */
+unsigned long pxa3xx_mfp_read(int mfp);
+void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
+
+/*
+ * pxa3xx_mfp_config - configure the MFPR registers
+ *
+ * used by board specific initialization code
+ */
+void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num);
+
+/*
+ * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
+ * index and MFPR register offset
+ *
+ * used by processor specific code
+ */
+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
+void __init pxa3xx_init_mfp(void);
+#endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
new file mode 100644
index 000000000000..fabd9b4df827
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -0,0 +1,491 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+ *
+ * PXA930 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA9xx_H
+#define __ASM_ARCH_MFP_PXA9xx_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO             MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO             MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO             MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO             MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO             MFP_CFG(GPIO52, AF0)
+#define GPIO56_GPIO             MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO             MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO             MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO             MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO             MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO             MFP_CFG(GPIO62, AF0)
+
+#define GSIM_UCLK_GPIO_79       MFP_CFG(GSIM_UCLK, AF0)
+#define GSIM_UIO_GPIO_80        MFP_CFG(GSIM_UIO, AF0)
+#define GSIM_nURST_GPIO_81      MFP_CFG(GSIM_nURST, AF0)
+#define GSIM_UDET_GPIO_82       MFP_CFG(GSIM_UDET, AF0)
+
+#define DF_IO15_GPIO_28         MFP_CFG(DF_IO15, AF0)
+#define DF_IO14_GPIO_29         MFP_CFG(DF_IO14, AF0)
+#define DF_IO13_GPIO_30         MFP_CFG(DF_IO13, AF0)
+#define DF_IO12_GPIO_31         MFP_CFG(DF_IO12, AF0)
+#define DF_IO11_GPIO_32         MFP_CFG(DF_IO11, AF0)
+#define DF_IO10_GPIO_33         MFP_CFG(DF_IO10, AF0)
+#define DF_IO9_GPIO_34          MFP_CFG(DF_IO9, AF0)
+#define DF_IO8_GPIO_35          MFP_CFG(DF_IO8, AF0)
+#define DF_IO7_GPIO_36          MFP_CFG(DF_IO7, AF0)
+#define DF_IO6_GPIO_37          MFP_CFG(DF_IO6, AF0)
+#define DF_IO5_GPIO_38          MFP_CFG(DF_IO5, AF0)
+#define DF_IO4_GPIO_39          MFP_CFG(DF_IO4, AF0)
+#define DF_IO3_GPIO_40          MFP_CFG(DF_IO3, AF0)
+#define DF_IO2_GPIO_41          MFP_CFG(DF_IO2, AF0)
+#define DF_IO1_GPIO_42          MFP_CFG(DF_IO1, AF0)
+#define DF_IO0_GPIO_43          MFP_CFG(DF_IO0, AF0)
+#define DF_nCS0_GPIO_44         MFP_CFG(DF_nCS0, AF0)
+#define DF_nCS1_GPIO_45         MFP_CFG(DF_nCS1, AF0)
+#define DF_nWE_GPIO_46          MFP_CFG(DF_nWE, AF0)
+#define DF_nRE_nOE_GPIO_47      MFP_CFG(DF_nRE_nOE, AF0)
+#define DF_CLE_nOE_GPIO_48      MFP_CFG(DF_CLE_nOE, AF0)
+#define DF_nADV1_ALE_GPIO_49    MFP_CFG(DF_nADV1_ALE, AF0)
+#define DF_nADV2_ALE_GPIO_50    MFP_CFG(DF_nADV2_ALE, AF0)
+#define DF_INT_RnB_GPIO_51      MFP_CFG(DF_INT_RnB, AF0)
+#define DF_SCLK_E_GPIO_52       MFP_CFG(DF_SCLK_E, AF0)
+
+#define DF_ADDR0_GPIO_53        MFP_CFG(DF_ADDR0, AF0)
+#define DF_ADDR1_GPIO_54        MFP_CFG(DF_ADDR1, AF0)
+#define DF_ADDR2_GPIO_55        MFP_CFG(DF_ADDR2, AF0)
+#define DF_ADDR3_GPIO_56        MFP_CFG(DF_ADDR3, AF0)
+#define nXCVREN_GPIO_57         MFP_CFG(nXCVREN, AF0)
+#define nLUA_GPIO_58            MFP_CFG(nLUA, AF0)
+#define nLLA_GPIO_59            MFP_CFG(nLLA, AF0)
+#define nBE0_GPIO_60            MFP_CFG(nBE0, AF0)
+#define nBE1_GPIO_61            MFP_CFG(nBE1, AF0)
+#define RDY_GPIO_62             MFP_CFG(RDY, AF0)
+
+/* Chip Select */
+#define DF_nCS0_nCS2            MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
+#define DF_nCS1_nCS3            MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
+
+/* AC97 */
+#define GPIO83_BAC97_SYSCLK     MFP_CFG(GPIO83, AF3)
+#define GPIO84_BAC97_SDATA_IN0  MFP_CFG(GPIO84, AF3)
+#define GPIO85_BAC97_BITCLK     MFP_CFG(GPIO85, AF3)
+#define GPIO86_BAC97_nRESET     MFP_CFG(GPIO86, AF3)
+#define GPIO87_BAC97_SYNC       MFP_CFG(GPIO87, AF3)
+#define GPIO88_BAC97_SDATA_OUT  MFP_CFG(GPIO88, AF3)
+
+/* I2C */
+#define GPIO39_CI2C_SCL         MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
+#define GPIO40_CI2C_SDA         MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
+
+#define GPIO51_CI2C_SCL         MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
+#define GPIO52_CI2C_SDA         MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
+
+#define GPIO63_CI2C_SCL         MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
+#define GPIO64_CI2C_SDA         MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
+
+#define GPIO77_CI2C_SCL         MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
+#define GPIO78_CI2C_SDA         MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
+
+#define GPIO89_CI2C_SCL         MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
+#define GPIO90_CI2C_SDA         MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
+
+#define GPIO95_CI2C_SCL         MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_CI2C_SDA         MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+
+#define GPIO97_CI2C_SCL         MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
+#define GPIO98_CI2C_SDA         MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
+
+/* QCI */
+#define GPIO63_CI_DD_9          MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
+#define GPIO64_CI_DD_8          MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
+#define GPIO65_CI_DD_7          MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
+#define GPIO66_CI_DD_6          MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
+#define GPIO67_CI_DD_5          MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
+#define GPIO68_CI_DD_4          MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
+#define GPIO69_CI_DD_3          MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
+#define GPIO70_CI_DD_2          MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
+#define GPIO71_CI_DD_1          MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
+#define GPIO72_CI_DD_0          MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
+#define GPIO73_CI_HSYNC         MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
+#define GPIO74_CI_VSYNC         MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
+#define GPIO75_CI_MCLK          MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
+#define GPIO76_CI_PCLK          MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
+
+/* KEYPAD */
+#define GPIO4_KP_DKIN_4         MFP_CFG_LPM(GPIO4, AF3, FLOAT)
+#define GPIO5_KP_DKIN_5         MFP_CFG_LPM(GPIO5, AF3, FLOAT)
+#define GPIO6_KP_DKIN_6         MFP_CFG_LPM(GPIO6, AF3, FLOAT)
+#define GPIO7_KP_DKIN_7         MFP_CFG_LPM(GPIO7, AF3, FLOAT)
+#define GPIO8_KP_DKIN_4         MFP_CFG_LPM(GPIO8, AF3, FLOAT)
+#define GPIO9_KP_DKIN_5         MFP_CFG_LPM(GPIO9, AF3, FLOAT)
+#define GPIO10_KP_DKIN_6        MFP_CFG_LPM(GPIO10, AF3, FLOAT)
+#define GPIO11_KP_DKIN_7        MFP_CFG_LPM(GPIO11, AF3, FLOAT)
+
+#define GPIO12_KP_DKIN_0        MFP_CFG_LPM(GPIO12, AF2, FLOAT)
+#define GPIO13_KP_DKIN_1        MFP_CFG_LPM(GPIO13, AF2, FLOAT)
+#define GPIO14_KP_DKIN_2        MFP_CFG_LPM(GPIO14, AF2, FLOAT)
+#define GPIO15_KP_DKIN_3        MFP_CFG_LPM(GPIO15, AF2, FLOAT)
+
+#define GPIO41_KP_DKIN_0        MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO42_KP_DKIN_1        MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO43_KP_DKIN_2        MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO44_KP_DKIN_3        MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO41_KP_DKIN_4        MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_KP_DKIN_5        MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+
+#define GPIO0_KP_MKIN_0         MFP_CFG_LPM(GPIO0, AF1, FLOAT)
+#define GPIO2_KP_MKIN_1         MFP_CFG_LPM(GPIO2, AF1, FLOAT)
+#define GPIO4_KP_MKIN_2         MFP_CFG_LPM(GPIO4, AF1, FLOAT)
+#define GPIO6_KP_MKIN_3         MFP_CFG_LPM(GPIO6, AF1, FLOAT)
+#define GPIO8_KP_MKIN_4         MFP_CFG_LPM(GPIO8, AF1, FLOAT)
+#define GPIO10_KP_MKIN_5        MFP_CFG_LPM(GPIO10, AF1, FLOAT)
+#define GPIO12_KP_MKIN_6        MFP_CFG_LPM(GPIO12, AF1, FLOAT)
+#define GPIO14_KP_MKIN_7        MFP_CFG(GPIO14, AF1)
+#define GPIO35_KP_MKIN_5        MFP_CFG(GPIO35, AF4)
+
+#define GPIO1_KP_MKOUT_0        MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
+#define GPIO3_KP_MKOUT_1        MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
+#define GPIO5_KP_MKOUT_2        MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
+#define GPIO7_KP_MKOUT_3        MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
+#define GPIO9_KP_MKOUT_4        MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5       MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_6       MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
+#define GPIO15_KP_MKOUT_7       MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO36_KP_MKOUT_5       MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO17_LCD_FCLK_RD      MFP_CFG(GPIO17, AF1)
+#define GPIO18_LCD_LCLK_A0      MFP_CFG(GPIO18, AF1)
+#define GPIO19_LCD_PCLK_WR      MFP_CFG(GPIO19, AF1)
+#define GPIO20_LCD_BIAS         MFP_CFG(GPIO20, AF1)
+#define GPIO21_LCD_CS           MFP_CFG(GPIO21, AF1)
+#define GPIO22_LCD_CS2          MFP_CFG(GPIO22, AF2)
+#define GPIO22_LCD_VSYNC        MFP_CFG(GPIO22, AF1)
+#define GPIO23_LCD_DD0          MFP_CFG(GPIO23, AF1)
+#define GPIO24_LCD_DD1          MFP_CFG(GPIO24, AF1)
+#define GPIO25_LCD_DD2          MFP_CFG(GPIO25, AF1)
+#define GPIO26_LCD_DD3          MFP_CFG(GPIO26, AF1)
+#define GPIO27_LCD_DD4          MFP_CFG(GPIO27, AF1)
+#define GPIO28_LCD_DD5          MFP_CFG(GPIO28, AF1)
+#define GPIO29_LCD_DD6          MFP_CFG(GPIO29, AF1)
+#define GPIO30_LCD_DD7          MFP_CFG(GPIO30, AF1)
+#define GPIO31_LCD_DD8          MFP_CFG(GPIO31, AF1)
+#define GPIO32_LCD_DD9          MFP_CFG(GPIO32, AF1)
+#define GPIO33_LCD_DD10         MFP_CFG(GPIO33, AF1)
+#define GPIO34_LCD_DD11         MFP_CFG(GPIO34, AF1)
+#define GPIO35_LCD_DD12         MFP_CFG(GPIO35, AF1)
+#define GPIO36_LCD_DD13         MFP_CFG(GPIO36, AF1)
+#define GPIO37_LCD_DD14         MFP_CFG(GPIO37, AF1)
+#define GPIO38_LCD_DD15         MFP_CFG(GPIO38, AF1)
+#define GPIO39_LCD_DD16         MFP_CFG(GPIO39, AF1)
+#define GPIO40_LCD_DD17         MFP_CFG(GPIO40, AF1)
+#define GPIO41_LCD_CS2          MFP_CFG(GPIO41, AF3)
+#define GPIO42_LCD_VSYNC2       MFP_CFG(GPIO42, AF3)
+#define GPIO44_LCD_DD7          MFP_CFG(GPIO44, AF1)
+
+/* Mini-LCD */
+#define GPIO17_MLCD_FCLK        MFP_CFG(GPIO17, AF3)
+#define GPIO18_MLCD_LCLK        MFP_CFG(GPIO18, AF3)
+#define GPIO19_MLCD_PCLK        MFP_CFG(GPIO19, AF3)
+#define GPIO20_MLCD_BIAS        MFP_CFG(GPIO20, AF3)
+#define GPIO23_MLCD_DD0         MFP_CFG(GPIO23, AF3)
+#define GPIO24_MLCD_DD1         MFP_CFG(GPIO24, AF3)
+#define GPIO25_MLCD_DD2         MFP_CFG(GPIO25, AF3)
+#define GPIO26_MLCD_DD3         MFP_CFG(GPIO26, AF3)
+#define GPIO27_MLCD_DD4         MFP_CFG(GPIO27, AF3)
+#define GPIO28_MLCD_DD5         MFP_CFG(GPIO28, AF3)
+#define GPIO29_MLCD_DD6         MFP_CFG(GPIO29, AF3)
+#define GPIO30_MLCD_DD7         MFP_CFG(GPIO30, AF3)
+#define GPIO31_MLCD_DD8         MFP_CFG(GPIO31, AF3)
+#define GPIO32_MLCD_DD9         MFP_CFG(GPIO32, AF3)
+#define GPIO33_MLCD_DD10        MFP_CFG(GPIO33, AF3)
+#define GPIO34_MLCD_DD11        MFP_CFG(GPIO34, AF3)
+#define GPIO35_MLCD_DD12        MFP_CFG(GPIO35, AF3)
+#define GPIO36_MLCD_DD13        MFP_CFG(GPIO36, AF3)
+#define GPIO37_MLCD_DD14        MFP_CFG(GPIO37, AF3)
+#define GPIO38_MLCD_DD15        MFP_CFG(GPIO38, AF3)
+#define GPIO44_MLCD_DD7         MFP_CFG(GPIO44, AF5)
+
+/* MMC1 */
+#define GPIO10_MMC1_DAT3        MFP_CFG(GPIO10, AF4)
+#define GPIO11_MMC1_DAT2        MFP_CFG(GPIO11, AF4)
+#define GPIO12_MMC1_DAT1        MFP_CFG(GPIO12, AF4)
+#define GPIO13_MMC1_DAT0        MFP_CFG(GPIO13, AF4)
+#define GPIO14_MMC1_CMD         MFP_CFG(GPIO14, AF4)
+#define GPIO15_MMC1_CLK         MFP_CFG(GPIO15, AF4)
+#define GPIO55_MMC1_CMD         MFP_CFG(GPIO55, AF3)
+#define GPIO56_MMC1_CLK         MFP_CFG(GPIO56, AF3)
+#define GPIO57_MMC1_DAT0        MFP_CFG(GPIO57, AF3)
+#define GPIO58_MMC1_DAT1        MFP_CFG(GPIO58, AF3)
+#define GPIO59_MMC1_DAT2        MFP_CFG(GPIO59, AF3)
+#define GPIO60_MMC1_DAT3        MFP_CFG(GPIO60, AF3)
+
+#define DF_ADDR0_MMC1_CLK       MFP_CFG(DF_ADDR0, AF2)
+#define DF_ADDR1_MMC1_CMD       MFP_CFG(DF_ADDR1, AF2)
+#define DF_ADDR2_MMC1_DAT0      MFP_CFG(DF_ADDR2, AF2)
+#define DF_ADDR3_MMC1_DAT1      MFP_CFG(DF_ADDR3, AF3)
+#define nXCVREN_MMC1_DAT2       MFP_CFG(nXCVREN, AF2)
+
+/* MMC2 */
+#define GPIO31_MMC2_CMD         MFP_CFG(GPIO31, AF7)
+#define GPIO32_MMC2_CLK         MFP_CFG(GPIO32, AF7)
+#define GPIO33_MMC2_DAT0        MFP_CFG(GPIO33, AF7)
+#define GPIO34_MMC2_DAT1        MFP_CFG(GPIO34, AF7)
+#define GPIO35_MMC2_DAT2        MFP_CFG(GPIO35, AF7)
+#define GPIO36_MMC2_DAT3        MFP_CFG(GPIO36, AF7)
+
+#define GPIO101_MMC2_DAT3       MFP_CFG(GPIO101, AF1)
+#define GPIO102_MMC2_DAT2       MFP_CFG(GPIO102, AF1)
+#define GPIO103_MMC2_DAT1       MFP_CFG(GPIO103, AF1)
+#define GPIO104_MMC2_DAT0       MFP_CFG(GPIO104, AF1)
+#define GPIO105_MMC2_CMD        MFP_CFG(GPIO105, AF1)
+#define GPIO106_MMC2_CLK        MFP_CFG(GPIO106, AF1)
+
+#define DF_IO10_MMC2_DAT3       MFP_CFG(DF_IO10, AF3)
+#define DF_IO11_MMC2_DAT2       MFP_CFG(DF_IO11, AF3)
+#define DF_IO12_MMC2_DAT1       MFP_CFG(DF_IO12, AF3)
+#define DF_IO13_MMC2_DAT0       MFP_CFG(DF_IO13, AF3)
+#define DF_IO14_MMC2_CLK        MFP_CFG(DF_IO14, AF3)
+#define DF_IO15_MMC2_CMD        MFP_CFG(DF_IO15, AF3)
+
+/* BSSP1 */
+#define GPIO12_BSSP1_CLK        MFP_CFG(GPIO12, AF3)
+#define GPIO13_BSSP1_FRM        MFP_CFG(GPIO13, AF3)
+#define GPIO14_BSSP1_RXD        MFP_CFG(GPIO14, AF3)
+#define GPIO15_BSSP1_TXD        MFP_CFG(GPIO15, AF3)
+#define GPIO97_BSSP1_CLK        MFP_CFG(GPIO97, AF5)
+#define GPIO98_BSSP1_FRM        MFP_CFG(GPIO98, AF5)
+
+/* BSSP2 */
+#define GPIO84_BSSP2_SDATA_IN   MFP_CFG(GPIO84, AF1)
+#define GPIO85_BSSP2_BITCLK     MFP_CFG(GPIO85, AF1)
+#define GPIO86_BSSP2_SYSCLK     MFP_CFG(GPIO86, AF1)
+#define GPIO87_BSSP2_SYNC       MFP_CFG(GPIO87, AF1)
+#define GPIO88_BSSP2_DATA_OUT   MFP_CFG(GPIO88, AF1)
+#define GPIO86_BSSP2_SDATA_IN   MFP_CFG(GPIO86, AF4)
+
+/* BSSP3 */
+#define GPIO79_BSSP3_CLK        MFP_CFG(GPIO79, AF1)
+#define GPIO80_BSSP3_FRM        MFP_CFG(GPIO80, AF1)
+#define GPIO81_BSSP3_TXD        MFP_CFG(GPIO81, AF1)
+#define GPIO82_BSSP3_RXD        MFP_CFG(GPIO82, AF1)
+#define GPIO83_BSSP3_SYSCLK     MFP_CFG(GPIO83, AF1)
+
+/* BSSP4 */
+#define GPIO43_BSSP4_CLK        MFP_CFG(GPIO43, AF4)
+#define GPIO44_BSSP4_FRM        MFP_CFG(GPIO44, AF4)
+#define GPIO45_BSSP4_TXD        MFP_CFG(GPIO45, AF4)
+#define GPIO46_BSSP4_RXD        MFP_CFG(GPIO46, AF4)
+
+#define GPIO51_BSSP4_CLK        MFP_CFG(GPIO51, AF4)
+#define GPIO52_BSSP4_FRM        MFP_CFG(GPIO52, AF4)
+#define GPIO53_BSSP4_TXD        MFP_CFG(GPIO53, AF4)
+#define GPIO54_BSSP4_RXD        MFP_CFG(GPIO54, AF4)
+
+/* GSSP1 */
+#define GPIO79_GSSP1_CLK        MFP_CFG(GPIO79, AF2)
+#define GPIO80_GSSP1_FRM        MFP_CFG(GPIO80, AF2)
+#define GPIO81_GSSP1_TXD        MFP_CFG(GPIO81, AF2)
+#define GPIO82_GSSP1_RXD        MFP_CFG(GPIO82, AF2)
+#define GPIO83_GSSP1_SYSCLK     MFP_CFG(GPIO83, AF2)
+
+#define GPIO93_GSSP1_CLK        MFP_CFG(GPIO93, AF4)
+#define GPIO94_GSSP1_FRM        MFP_CFG(GPIO94, AF4)
+#define GPIO95_GSSP1_TXD        MFP_CFG(GPIO95, AF4)
+#define GPIO96_GSSP1_RXD        MFP_CFG(GPIO96, AF4)
+
+/* GSSP2 */
+#define GPIO47_GSSP2_CLK        MFP_CFG(GPIO47, AF4)
+#define GPIO48_GSSP2_FRM        MFP_CFG(GPIO48, AF4)
+#define GPIO49_GSSP2_RXD        MFP_CFG(GPIO49, AF4)
+#define GPIO50_GSSP2_TXD        MFP_CFG(GPIO50, AF4)
+
+#define GPIO69_GSSP2_CLK        MFP_CFG(GPIO69, AF4)
+#define GPIO70_GSSP2_FRM        MFP_CFG(GPIO70, AF4)
+#define GPIO71_GSSP2_RXD        MFP_CFG(GPIO71, AF4)
+#define GPIO72_GSSP2_TXD        MFP_CFG(GPIO72, AF4)
+
+#define GPIO84_GSSP2_RXD        MFP_CFG(GPIO84, AF2)
+#define GPIO85_GSSP2_CLK        MFP_CFG(GPIO85, AF2)
+#define GPIO86_GSSP2_SYSCLK     MFP_CFG(GPIO86, AF2)
+#define GPIO87_GSSP2_FRM        MFP_CFG(GPIO87, AF2)
+#define GPIO88_GSSP2_TXD        MFP_CFG(GPIO88, AF2)
+#define GPIO86_GSSP2_RXD        MFP_CFG(GPIO86, AF5)
+
+#define GPIO103_GSSP2_CLK       MFP_CFG(GPIO103, AF2)
+#define GPIO104_GSSP2_FRM       MFP_CFG(GPIO104, AF2)
+#define GPIO105_GSSP2_RXD       MFP_CFG(GPIO105, AF2)
+#define GPIO106_GSSP2_TXD       MFP_CFG(GPIO106, AF2)
+
+/* UART1 - FFUART */
+#define GPIO47_UART1_DSR_N      MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART1_DTR_N      MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART1_RI         MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART1_DCD        MFP_CFG(GPIO50, AF1)
+#define GPIO51_UART1_CTS        MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART1_RTS        MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART1_RXD        MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART1_TXD        MFP_CFG(GPIO54, AF1)
+
+#define GPIO63_UART1_TXD        MFP_CFG(GPIO63, AF2)
+#define GPIO64_UART1_RXD        MFP_CFG(GPIO64, AF2)
+#define GPIO65_UART1_DSR        MFP_CFG(GPIO65, AF2)
+#define GPIO66_UART1_DTR        MFP_CFG(GPIO66, AF2)
+#define GPIO67_UART1_RI         MFP_CFG(GPIO67, AF2)
+#define GPIO68_UART1_DCD        MFP_CFG(GPIO68, AF2)
+#define GPIO69_UART1_CTS        MFP_CFG(GPIO69, AF2)
+#define GPIO70_UART1_RTS        MFP_CFG(GPIO70, AF2)
+
+/* UART2 - BTUART */
+#define GPIO91_UART2_RXD        MFP_CFG(GPIO91, AF1)
+#define GPIO92_UART2_TXD        MFP_CFG(GPIO92, AF1)
+#define GPIO93_UART2_CTS        MFP_CFG(GPIO93, AF1)
+#define GPIO94_UART2_RTS        MFP_CFG(GPIO94, AF1)
+
+/* UART3 - STUART */
+#define GPIO43_UART3_RTS        MFP_CFG(GPIO43, AF3)
+#define GPIO44_UART3_CTS        MFP_CFG(GPIO44, AF3)
+#define GPIO45_UART3_RXD        MFP_CFG(GPIO45, AF3)
+#define GPIO46_UART3_TXD        MFP_CFG(GPIO46, AF3)
+
+#define GPIO75_UART3_RTS        MFP_CFG(GPIO75, AF5)
+#define GPIO76_UART3_CTS        MFP_CFG(GPIO76, AF5)
+#define GPIO77_UART3_TXD        MFP_CFG(GPIO77, AF5)
+#define GPIO78_UART3_RXD        MFP_CFG(GPIO78, AF5)
+
+/* DFI */
+#define DF_IO0_DF_IO0           MFP_CFG(DF_IO0, AF2)
+#define DF_IO1_DF_IO1           MFP_CFG(DF_IO1, AF2)
+#define DF_IO2_DF_IO2           MFP_CFG(DF_IO2, AF2)
+#define DF_IO3_DF_IO3           MFP_CFG(DF_IO3, AF2)
+#define DF_IO4_DF_IO4           MFP_CFG(DF_IO4, AF2)
+#define DF_IO5_DF_IO5           MFP_CFG(DF_IO5, AF2)
+#define DF_IO6_DF_IO6           MFP_CFG(DF_IO6, AF2)
+#define DF_IO7_DF_IO7           MFP_CFG(DF_IO7, AF2)
+#define DF_IO8_DF_IO8           MFP_CFG(DF_IO8, AF2)
+#define DF_IO9_DF_IO9           MFP_CFG(DF_IO9, AF2)
+#define DF_IO10_DF_IO10         MFP_CFG(DF_IO10, AF2)
+#define DF_IO11_DF_IO11         MFP_CFG(DF_IO11, AF2)
+#define DF_IO12_DF_IO12         MFP_CFG(DF_IO12, AF2)
+#define DF_IO13_DF_IO13         MFP_CFG(DF_IO13, AF2)
+#define DF_IO14_DF_IO14         MFP_CFG(DF_IO14, AF2)
+#define DF_IO15_DF_IO15         MFP_CFG(DF_IO15, AF2)
+#define DF_nADV1_ALE_DF_nADV1   MFP_CFG(DF_nADV1_ALE, AF2)
+#define DF_nADV2_ALE_DF_nADV2   MFP_CFG(DF_nADV2_ALE, AF2)
+#define DF_nCS0_DF_nCS0         MFP_CFG(DF_nCS0, AF2)
+#define DF_nCS1_DF_nCS1         MFP_CFG(DF_nCS1, AF2)
+#define DF_nRE_nOE_DF_nOE       MFP_CFG(DF_nRE_nOE, AF2)
+#define DF_nWE_DF_nWE           MFP_CFG(DF_nWE, AF2)
+
+/* DFI - NAND */
+#define DF_CLE_nOE_ND_CLE       MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
+#define DF_INT_RnB_ND_INT_RnB   MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
+#define DF_IO0_ND_IO0           MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
+#define DF_IO1_ND_IO1           MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
+#define DF_IO2_ND_IO2           MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
+#define DF_IO3_ND_IO3           MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
+#define DF_IO4_ND_IO4           MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
+#define DF_IO5_ND_IO5           MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
+#define DF_IO6_ND_IO6           MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
+#define DF_IO7_ND_IO7           MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
+#define DF_IO8_ND_IO8           MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
+#define DF_IO9_ND_IO9           MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
+#define DF_IO10_ND_IO10         MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
+#define DF_IO11_ND_IO11         MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
+#define DF_IO12_ND_IO12         MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
+#define DF_IO13_ND_IO13         MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
+#define DF_IO14_ND_IO14         MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
+#define DF_IO15_ND_IO15         MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
+#define DF_nADV1_ALE_ND_ALE     MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
+#define DF_nADV2_ALE_ND_ALE     MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
+#define DF_nADV2_ALE_nCS3       MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
+#define DF_nCS0_ND_nCS0         MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
+#define DF_nCS1_ND_nCS1         MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
+#define DF_nRE_nOE_ND_nRE       MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
+#define DF_nWE_ND_nWE           MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
+
+/* PWM */
+#define GPIO41_PWM0             MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
+#define GPIO42_PWM1             MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
+#define GPIO43_PWM3             MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
+#define GPIO20_PWM0             MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
+#define GPIO21_PWM2             MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
+#define GPIO22_PWM3             MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+
+/* CIR */
+#define GPIO46_CIR_OUT          MFP_CFG(GPIO46, AF1)
+#define GPIO77_CIR_OUT          MFP_CFG(GPIO77, AF3)
+
+/* USB P2 */
+#define GPIO0_USB_P2_7          MFP_CFG(GPIO0, AF3)
+#define GPIO15_USB_P2_7         MFP_CFG(GPIO15, AF5)
+#define GPIO16_USB_P2_7         MFP_CFG(GPIO16, AF2)
+#define GPIO48_USB_P2_7         MFP_CFG(GPIO48, AF7)
+#define GPIO49_USB_P2_7         MFP_CFG(GPIO49, AF6)
+#define DF_IO9_USB_P2_7         MFP_CFG(DF_IO9, AF3)
+
+#define GPIO48_USB_P2_8         MFP_CFG(GPIO48, AF2)
+#define GPIO50_USB_P2_7         MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
+#define GPIO51_USB_P2_5         MFP_CFG(GPIO51, AF2)
+#define GPIO47_USB_P2_4         MFP_CFG(GPIO47, AF2)
+#define GPIO53_USB_P2_3         MFP_CFG(GPIO53, AF2)
+#define GPIO54_USB_P2_6         MFP_CFG(GPIO54, AF2)
+#define GPIO49_USB_P2_2         MFP_CFG(GPIO49, AF2)
+#define GPIO52_USB_P2_1         MFP_CFG(GPIO52, AF2)
+
+#define GPIO63_USB_P2_8         MFP_CFG(GPIO63, AF3)
+#define GPIO64_USB_P2_7         MFP_CFG(GPIO64, AF3)
+#define GPIO65_USB_P2_6         MFP_CFG(GPIO65, AF3)
+#define GPIO66_USG_P2_5         MFP_CFG(GPIO66, AF3)
+#define GPIO67_USB_P2_4         MFP_CFG(GPIO67, AF3)
+#define GPIO68_USB_P2_3         MFP_CFG(GPIO68, AF3)
+#define GPIO69_USB_P2_2         MFP_CFG(GPIO69, AF3)
+#define GPIO70_USB_P2_1         MFP_CFG(GPIO70, AF3)
+
+/* ULPI */
+#define GPIO31_USB_ULPI_D0      MFP_CFG(GPIO31, AF4)
+#define GPIO30_USB_ULPI_D1      MFP_CFG(GPIO30, AF7)
+#define GPIO33_USB_ULPI_D2      MFP_CFG(GPIO33, AF5)
+#define GPIO34_USB_ULPI_D3      MFP_CFG(GPIO34, AF5)
+#define GPIO35_USB_ULPI_D4      MFP_CFG(GPIO35, AF5)
+#define GPIO36_USB_ULPI_D5      MFP_CFG(GPIO36, AF5)
+#define GPIO41_USB_ULPI_D6      MFP_CFG(GPIO41, AF5)
+#define GPIO42_USB_ULPI_D7      MFP_CFG(GPIO42, AF5)
+#define GPIO37_USB_ULPI_DIR     MFP_CFG(GPIO37, AF4)
+#define GPIO38_USB_ULPI_CLK     MFP_CFG(GPIO38, AF4)
+#define GPIO39_USB_ULPI_STP     MFP_CFG(GPIO39, AF4)
+#define GPIO40_USB_ULPI_NXT     MFP_CFG(GPIO40, AF4)
+
+#define GPIO3_CLK26MOUTDMD      MFP_CFG(GPIO3, AF3)
+#define GPIO40_CLK26MOUTDMD     MFP_CFG(GPIO40, AF7)
+#define GPIO94_CLK26MOUTDMD     MFP_CFG(GPIO94, AF5)
+#define GPIO104_CLK26MOUTDMD    MFP_CFG(GPIO104, AF4)
+#define DF_ADDR1_CLK26MOUTDMD   MFP_CFG(DF_ADDR2, AF3)
+#define DF_ADDR3_CLK26MOUTDMD   MFP_CFG(DF_ADDR3, AF3)
+
+#define GPIO14_CLK26MOUT        MFP_CFG(GPIO14, AF5)
+#define GPIO38_CLK26MOUT        MFP_CFG(GPIO38, AF7)
+#define GPIO92_CLK26MOUT        MFP_CFG(GPIO92, AF5)
+#define GPIO105_CLK26MOUT       MFP_CFG(GPIO105, AF4)
+
+#define GPIO2_CLK13MOUTDMD      MFP_CFG(GPIO2, AF3)
+#define GPIO39_CLK13MOUTDMD     MFP_CFG(GPIO39, AF7)
+#define GPIO50_CLK13MOUTDMD     MFP_CFG(GPIO50, AF3)
+#define GPIO93_CLK13MOUTDMD     MFP_CFG(GPIO93, AF5)
+#define GPIO103_CLK13MOUTDMD    MFP_CFG(GPIO103, AF4)
+#define DF_ADDR2_CLK13MOUTDMD   MFP_CFG(DF_ADDR2, AF3)
+
+/* 1 wire */
+#define GPIO95_OW_DQ_IN         MFP_CFG(GPIO95, AF5)
+
+#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
new file mode 100644
index 000000000000..8769567b389b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -0,0 +1,319 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp.h
+ *
+ * Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ *            initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+#define mfp_to_gpio(m)  ((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+        MFP_PIN_INVALID = -1,
+
+        MFP_PIN_GPIO0 = 0,
+        MFP_PIN_GPIO1,
+        MFP_PIN_GPIO2,
+        MFP_PIN_GPIO3,
+        MFP_PIN_GPIO4,
+        MFP_PIN_GPIO5,
+        MFP_PIN_GPIO6,
+        MFP_PIN_GPIO7,
+        MFP_PIN_GPIO8,
+        MFP_PIN_GPIO9,
+        MFP_PIN_GPIO10,
+        MFP_PIN_GPIO11,
+        MFP_PIN_GPIO12,
+        MFP_PIN_GPIO13,
+        MFP_PIN_GPIO14,
+        MFP_PIN_GPIO15,
+        MFP_PIN_GPIO16,
+        MFP_PIN_GPIO17,
+        MFP_PIN_GPIO18,
+        MFP_PIN_GPIO19,
+        MFP_PIN_GPIO20,
+        MFP_PIN_GPIO21,
+        MFP_PIN_GPIO22,
+        MFP_PIN_GPIO23,
+        MFP_PIN_GPIO24,
+        MFP_PIN_GPIO25,
+        MFP_PIN_GPIO26,
+        MFP_PIN_GPIO27,
+        MFP_PIN_GPIO28,
+        MFP_PIN_GPIO29,
+        MFP_PIN_GPIO30,
+        MFP_PIN_GPIO31,
+        MFP_PIN_GPIO32,
+        MFP_PIN_GPIO33,
+        MFP_PIN_GPIO34,
+        MFP_PIN_GPIO35,
+        MFP_PIN_GPIO36,
+        MFP_PIN_GPIO37,
+        MFP_PIN_GPIO38,
+        MFP_PIN_GPIO39,
+        MFP_PIN_GPIO40,
+        MFP_PIN_GPIO41,
+        MFP_PIN_GPIO42,
+        MFP_PIN_GPIO43,
+        MFP_PIN_GPIO44,
+        MFP_PIN_GPIO45,
+        MFP_PIN_GPIO46,
+        MFP_PIN_GPIO47,
+        MFP_PIN_GPIO48,
+        MFP_PIN_GPIO49,
+        MFP_PIN_GPIO50,
+        MFP_PIN_GPIO51,
+        MFP_PIN_GPIO52,
+        MFP_PIN_GPIO53,
+        MFP_PIN_GPIO54,
+        MFP_PIN_GPIO55,
+        MFP_PIN_GPIO56,
+        MFP_PIN_GPIO57,
+        MFP_PIN_GPIO58,
+        MFP_PIN_GPIO59,
+        MFP_PIN_GPIO60,
+        MFP_PIN_GPIO61,
+        MFP_PIN_GPIO62,
+        MFP_PIN_GPIO63,
+        MFP_PIN_GPIO64,
+        MFP_PIN_GPIO65,
+        MFP_PIN_GPIO66,
+        MFP_PIN_GPIO67,
+        MFP_PIN_GPIO68,
+        MFP_PIN_GPIO69,
+        MFP_PIN_GPIO70,
+        MFP_PIN_GPIO71,
+        MFP_PIN_GPIO72,
+        MFP_PIN_GPIO73,
+        MFP_PIN_GPIO74,
+        MFP_PIN_GPIO75,
+        MFP_PIN_GPIO76,
+        MFP_PIN_GPIO77,
+        MFP_PIN_GPIO78,
+        MFP_PIN_GPIO79,
+        MFP_PIN_GPIO80,
+        MFP_PIN_GPIO81,
+        MFP_PIN_GPIO82,
+        MFP_PIN_GPIO83,
+        MFP_PIN_GPIO84,
+        MFP_PIN_GPIO85,
+        MFP_PIN_GPIO86,
+        MFP_PIN_GPIO87,
+        MFP_PIN_GPIO88,
+        MFP_PIN_GPIO89,
+        MFP_PIN_GPIO90,
+        MFP_PIN_GPIO91,
+        MFP_PIN_GPIO92,
+        MFP_PIN_GPIO93,
+        MFP_PIN_GPIO94,
+        MFP_PIN_GPIO95,
+        MFP_PIN_GPIO96,
+        MFP_PIN_GPIO97,
+        MFP_PIN_GPIO98,
+        MFP_PIN_GPIO99,
+        MFP_PIN_GPIO100,
+        MFP_PIN_GPIO101,
+        MFP_PIN_GPIO102,
+        MFP_PIN_GPIO103,
+        MFP_PIN_GPIO104,
+        MFP_PIN_GPIO105,
+        MFP_PIN_GPIO106,
+        MFP_PIN_GPIO107,
+        MFP_PIN_GPIO108,
+        MFP_PIN_GPIO109,
+        MFP_PIN_GPIO110,
+        MFP_PIN_GPIO111,
+        MFP_PIN_GPIO112,
+        MFP_PIN_GPIO113,
+        MFP_PIN_GPIO114,
+        MFP_PIN_GPIO115,
+        MFP_PIN_GPIO116,
+        MFP_PIN_GPIO117,
+        MFP_PIN_GPIO118,
+        MFP_PIN_GPIO119,
+        MFP_PIN_GPIO120,
+        MFP_PIN_GPIO121,
+        MFP_PIN_GPIO122,
+        MFP_PIN_GPIO123,
+        MFP_PIN_GPIO124,
+        MFP_PIN_GPIO125,
+        MFP_PIN_GPIO126,
+        MFP_PIN_GPIO127,
+        MFP_PIN_GPIO0_2,
+        MFP_PIN_GPIO1_2,
+        MFP_PIN_GPIO2_2,
+        MFP_PIN_GPIO3_2,
+        MFP_PIN_GPIO4_2,
+        MFP_PIN_GPIO5_2,
+        MFP_PIN_GPIO6_2,
+        MFP_PIN_GPIO7_2,
+        MFP_PIN_GPIO8_2,
+        MFP_PIN_GPIO9_2,
+        MFP_PIN_GPIO10_2,
+        MFP_PIN_GPIO11_2,
+        MFP_PIN_GPIO12_2,
+        MFP_PIN_GPIO13_2,
+        MFP_PIN_GPIO14_2,
+        MFP_PIN_GPIO15_2,
+        MFP_PIN_GPIO16_2,
+        MFP_PIN_GPIO17_2,
+
+        MFP_PIN_ULPI_STP,
+        MFP_PIN_ULPI_NXT,
+        MFP_PIN_ULPI_DIR,
+
+        MFP_PIN_nXCVREN,
+        MFP_PIN_DF_CLE_nOE,
+        MFP_PIN_DF_nADV1_ALE,
+        MFP_PIN_DF_SCLK_E,
+        MFP_PIN_DF_SCLK_S,
+        MFP_PIN_nBE0,
+        MFP_PIN_nBE1,
+        MFP_PIN_DF_nADV2_ALE,
+        MFP_PIN_DF_INT_RnB,
+        MFP_PIN_DF_nCS0,
+        MFP_PIN_DF_nCS1,
+        MFP_PIN_nLUA,
+        MFP_PIN_nLLA,
+        MFP_PIN_DF_nWE,
+        MFP_PIN_DF_ALE_nWE,
+        MFP_PIN_DF_nRE_nOE,
+        MFP_PIN_DF_ADDR0,
+        MFP_PIN_DF_ADDR1,
+        MFP_PIN_DF_ADDR2,
+        MFP_PIN_DF_ADDR3,
+        MFP_PIN_DF_IO0,
+        MFP_PIN_DF_IO1,
+        MFP_PIN_DF_IO2,
+        MFP_PIN_DF_IO3,
+        MFP_PIN_DF_IO4,
+        MFP_PIN_DF_IO5,
+        MFP_PIN_DF_IO6,
+        MFP_PIN_DF_IO7,
+        MFP_PIN_DF_IO8,
+        MFP_PIN_DF_IO9,
+        MFP_PIN_DF_IO10,
+        MFP_PIN_DF_IO11,
+        MFP_PIN_DF_IO12,
+        MFP_PIN_DF_IO13,
+        MFP_PIN_DF_IO14,
+        MFP_PIN_DF_IO15,
+
+        /* additional pins on PXA930 */
+        MFP_PIN_GSIM_UIO,
+        MFP_PIN_GSIM_UCLK,
+        MFP_PIN_GSIM_UDET,
+        MFP_PIN_GSIM_nURST,
+        MFP_PIN_PMIC_INT,
+        MFP_PIN_RDY,
+
+        MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ *                alternate function = 0,
+ *                drive strength = fast 3mA (MFP_DS03X)
+ *                low power mode = default
+ *                edge detection = none
+ *
+ * MFP_CFG      - default MFPR value with alternate function
+ * MFP_CFG_DRV  - default MFPR value with alternate function and
+ *                pin drive strength
+ * MFP_CFG_LPM  - default MFPR value with alternate function and
+ *                low power mode
+ * MFP_CFG_X    - default MFPR value with alternate function,
+ *                pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x)              ((x) & 0x3ff)
+
+#define MFP_AF0                 (0x0 << 10)
+#define MFP_AF1                 (0x1 << 10)
+#define MFP_AF2                 (0x2 << 10)
+#define MFP_AF3                 (0x3 << 10)
+#define MFP_AF4                 (0x4 << 10)
+#define MFP_AF5                 (0x5 << 10)
+#define MFP_AF6                 (0x6 << 10)
+#define MFP_AF7                 (0x7 << 10)
+#define MFP_AF_MASK             (0x7 << 10)
+#define MFP_AF(x)               (((x) >> 10) & 0x7)
+
+#define MFP_DS01X               (0x0 << 13)
+#define MFP_DS02X               (0x1 << 13)
+#define MFP_DS03X               (0x2 << 13)
+#define MFP_DS04X               (0x3 << 13)
+#define MFP_DS06X               (0x4 << 13)
+#define MFP_DS08X               (0x5 << 13)
+#define MFP_DS10X               (0x6 << 13)
+#define MFP_DS13X               (0x7 << 13)
+#define MFP_DS_MASK             (0x7 << 13)
+#define MFP_DS(x)               (((x) >> 13) & 0x7)
+
+#define MFP_LPM_INPUT           (0x0 << 16)
+#define MFP_LPM_DRIVE_LOW       (0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH      (0x2 << 16)
+#define MFP_LPM_PULL_LOW        (0x3 << 16)
+#define MFP_LPM_PULL_HIGH       (0x4 << 16)
+#define MFP_LPM_FLOAT           (0x5 << 16)
+#define MFP_LPM_STATE_MASK      (0x7 << 16)
+#define MFP_LPM_STATE(x)        (((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE       (0x0 << 19)
+#define MFP_LPM_EDGE_RISE       (0x1 << 19)
+#define MFP_LPM_EDGE_FALL       (0x2 << 19)
+#define MFP_LPM_EDGE_BOTH       (0x3 << 19)
+#define MFP_LPM_EDGE_MASK       (0x3 << 19)
+#define MFP_LPM_EDGE(x)         (((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE           (0x0 << 21)
+#define MFP_PULL_LOW            (0x1 << 21)
+#define MFP_PULL_HIGH           (0x2 << 21)
+#define MFP_PULL_BOTH           (0x3 << 21)
+#define MFP_PULL_MASK           (0x3 << 21)
+#define MFP_PULL(x)             (((x) >> 21) & 0x3)
+
+#define MFP_CFG_DEFAULT         (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
+                                 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af)                \
+        ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+         (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv)       \
+        ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+         (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm)       \
+        ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+         (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm)    \
+        ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+         (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
new file mode 100644
index 000000000000..6d1304c9270f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mmc.h
@@ -0,0 +1,23 @@
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+#include <linux/interrupt.h>
+
+struct device;
+struct mmc_host;
+
+struct pxamci_platform_data {
+        unsigned int ocr_mask;                  /* available voltages */
+        unsigned long detect_delay;             /* delay in jiffies before detecting cards after interrupt */
+        int (*init)(struct device *, irq_handler_t , void *);
+        int (*get_ro)(struct device *);
+        void (*setpower)(struct device *, unsigned int);
+        void (*exit)(struct device *, void *);
+};
+
+extern void pxa_set_mci_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
new file mode 100644
index 000000000000..351f32f13ce4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -0,0 +1,37 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ * 
+ * Author:      Nicolas Pitre
+ * Created:     Nov 2, 2004
+ * Copyright:   (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
+ */
+
+#ifndef __ARCH_PXA_MTD_XIP_H__
+#define __ARCH_PXA_MTD_XIP_H__
+
+#include <mach/pxa-regs.h>
+
+#define xip_irqpending()        (ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime()          (OSCR)
+#define xip_elapsed_since(x)    (signed)((OSCR - (x)) / 4)
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
+
+#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
new file mode 100644
index 000000000000..e848a47128cd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/ohci.h
@@ -0,0 +1,20 @@
+#ifndef ASMARM_ARCH_OHCI_H
+#define ASMARM_ARCH_OHCI_H
+
+struct device;
+
+struct pxaohci_platform_data {
+        int (*init)(struct device *);
+        void (*exit)(struct device *);
+
+        int port_mode;
+#define PMM_NPS_MODE           1
+#define PMM_GLOBAL_MODE        2
+#define PMM_PERPORT_MODE       3
+
+        int power_budget;
+};
+
+extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
new file mode 100644
index 000000000000..1e8bccbda510
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -0,0 +1,106 @@
+/*
+ * GPIOs and interrupts for Palm T|X Handheld Computer
+ *
+ * Based on palmld-gpio.h by Alex Osborne
+ *
+ * Authors:     Marek Vasut <marek.vasut@gmail.com>
+ *              Cristiano P. <cristianop@users.sourceforge.net>
+ *              Jan Herman <2hp@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTX_H_
+#define _INCLUDE_PALMTX_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTX_GPIO_RESET               1
+
+#define GPIO_NR_PALMTX_POWER_DETECT             12 /* 90 */
+#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N         10
+#define GPIO_NR_PALMTX_EARPHONE_DETECT          107
+
+/* SD/MMC */
+#define GPIO_NR_PALMTX_SD_DETECT_N              14
+#define GPIO_NR_PALMTX_SD_POWER                 114 /* probably */
+#define GPIO_NR_PALMTX_SD_READONLY              115 /* probably */
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMTX_WM9712_IRQ               27
+
+/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMTX_IR_DISABLE               40
+
+/* USB */
+#define GPIO_NR_PALMTX_USB_DETECT_N             13
+#define GPIO_NR_PALMTX_USB_POWER                95
+#define GPIO_NR_PALMTX_USB_PULLUP               93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTX_BL_POWER                 84
+#define GPIO_NR_PALMTX_LCD_POWER                96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMTX_BORDER_SWITCH            98
+#define GPIO_NR_PALMTX_BORDER_SELECT            22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMTX_BT_POWER                 17
+#define GPIO_NR_PALMTX_BT_RESET                 83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMTX_PCMCIA_POWER1            94
+#define GPIO_NR_PALMTX_PCMCIA_POWER2            108
+#define GPIO_NR_PALMTX_PCMCIA_RESET             79
+#define GPIO_NR_PALMTX_PCMCIA_READY             116
+
+/* NAND Flash ... this GPIO may be incorrect! */
+#define GPIO_NR_PALMTX_NAND_BUFFER_DIR          79
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMTX_SD_DETECT_N     IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N)
+#define IRQ_GPIO_PALMTX_WM9712_IRQ      IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ)
+#define IRQ_GPIO_PALMTX_USB_DETECT      IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT)
+#define IRQ_GPIO_PALMTX_GPIO_RESET      IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses  */
+#define PALMTX_PCMCIA_PHYS      0x28000000
+#define PALMTX_PCMCIA_VIRT      0xf0000000
+#define PALMTX_PCMCIA_SIZE      0x100000
+
+#define PALMTX_PHYS_RAM_START   0xa0000000
+#define PALMTX_PHYS_IO_START    0x40000000
+
+#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS    /* ChipSelect 0 */
+#define PALMTX_PHYS_NAND_START  PXA_CS1_PHYS    /* ChipSelect 1 */
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME                 21
+
+
+/* BATTERY */
+#define PALMTX_BAT_MAX_VOLTAGE          4000    /* 4.00v current voltage */
+#define PALMTX_BAT_MIN_VOLTAGE          3550    /* 3.55v critical voltage */
+#define PALMTX_BAT_MAX_CURRENT          0       /* unknokn */
+#define PALMTX_BAT_MIN_CURRENT          0       /* unknown */
+#define PALMTX_BAT_MAX_CHARGE           1       /* unknown */
+#define PALMTX_BAT_MIN_CHARGE           1       /* unknown */
+#define PALMTX_MAX_LIFE_MINS            360     /* on-life in minutes */
+
+#define PALMTX_BAT_MEASURE_DELAY        (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTX_MAX_INTENSITY            0xFE
+#define PALMTX_DEFAULT_INTENSITY        0x7E
+#define PALMTX_LIMIT_MASK               0x7F
+#define PALMTX_PRESCALER                0x3F
+#define PALMTX_PERIOD_NS                3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
new file mode 100644
index 000000000000..4dcd2e8baa61
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm027.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Definitions of CPU card resources only
+ */
+
+/* I2C RTC */
+#define PCM027_RTC_IRQ_GPIO     0
+#define PCM027_RTC_IRQ          IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ_EDGE     IRQ_TYPE_EDGE_FALLING
+#define ADR_PCM027_RTC          0x51    /* I2C address */
+
+/* I2C EEPROM */
+#define ADR_PCM027_EEPROM       0x54    /* I2C address */
+
+/* Ethernet chip (SMSC91C111) */
+#define PCM027_ETH_IRQ_GPIO     52
+#define PCM027_ETH_IRQ          IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ_EDGE     IRQ_TYPE_EDGE_RISING
+#define PCM027_ETH_PHYS         PXA_CS5_PHYS
+#define PCM027_ETH_SIZE         (1*1024*1024)
+
+/* CAN controller SJA1000 (unsupported yet) */
+#define PCM027_CAN_IRQ_GPIO     114
+#define PCM027_CAN_IRQ          IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ_EDGE     IRQ_TYPE_EDGE_FALLING
+#define PCM027_CAN_PHYS         0x22000000
+#define PCM027_CAN_SIZE         0x100
+
+/* SPI GPIO expander (unsupported yet) */
+#define PCM027_EGPIO_IRQ_GPIO   27
+#define PCM027_EGPIO_IRQ        IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ_EDGE   IRQ_TYPE_EDGE_FALLING
+#define PCM027_EGPIO_CS         24
+/*
+ * TODO: Switch this pin from dedicated usage to GPIO if
+ * more than the MAX7301 device is connected to this SPI bus
+ */
+#define PCM027_EGPIO_CS_MODE    GPIO24_SFRM_MD
+
+/* Flash memory */
+#define PCM027_FLASH_PHYS       0x00000000
+#define PCM027_FLASH_SIZE       0x02000000
+
+/* onboard LEDs connected to GPIO */
+#define PCM027_LED_CPU          90
+#define PCM027_LED_HEARD_BEAT   91
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own basebaord init function and call it from
+ * inside pcm027_init(). This example here is for the developmen board.
+ * Refer pcm990-baseboard.c
+ */
+extern void pcm990_baseboard_init(void);
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
new file mode 100644
index 000000000000..8a4383b776d7
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -0,0 +1,275 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <mach/pcm027.h>
+
+/*
+ * definitions relevant only when the PCM-990
+ * development base board is in use
+ */
+
+/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
+#define PCM990_CTRL_INT_IRQ_GPIO        9
+#define PCM990_CTRL_INT_IRQ             IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
+#define PCM990_CTRL_INT_IRQ_EDGE        IRQ_TYPE_EDGE_RISING
+#define PCM990_CTRL_PHYS                PXA_CS1_PHYS    /* 16-Bit */
+#define PCM990_CTRL_BASE                0xea000000
+#define PCM990_CTRL_SIZE                (1*1024*1024)
+
+#define PCM990_CTRL_PWR_IRQ_GPIO        14
+#define PCM990_CTRL_PWR_IRQ             IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
+#define PCM990_CTRL_PWR_IRQ_EDGE        IRQ_TYPE_EDGE_RISING
+
+/* visible CPLD (U7) registers */
+#define PCM990_CTRL_REG0        0x0000  /* RESET REGISTER */
+#define PCM990_CTRL_SYSRES      0x0001  /* System RESET REGISTER */
+#define PCM990_CTRL_RESOUT      0x0002  /* RESETOUT Enable REGISTER */
+#define PCM990_CTRL_RESGPIO     0x0004  /* RESETGPIO Enable REGISTER */
+
+#define PCM990_CTRL_REG1        0x0002  /* Power REGISTER */
+#define PCM990_CTRL_5VOFF       0x0001  /* Disable  5V Regulators */
+#define PCM990_CTRL_CANPWR      0x0004  /* Enable CANPWR ADUM */
+#define PCM990_CTRL_PM_5V       0x0008  /* Read 5V OK */
+
+#define PCM990_CTRL_REG2        0x0004  /* LED REGISTER */
+#define PCM990_CTRL_LEDPWR      0x0001  /* POWER LED enable */
+#define PCM990_CTRL_LEDBAS      0x0002  /* BASIS LED enable */
+#define PCM990_CTRL_LEDUSR      0x0004  /* USER LED enable */
+
+#define PCM990_CTRL_REG3        0x0006  /* LCD CTRL REGISTER 3 */
+#define PCM990_CTRL_LCDPWR      0x0001  /* RW LCD Power on */
+#define PCM990_CTRL_LCDON       0x0002  /* RW LCD Latch on */
+#define PCM990_CTRL_LCDPOS1     0x0004  /* RW POS 1 */
+#define PCM990_CTRL_LCDPOS2     0x0008  /* RW POS 2 */
+
+#define PCM990_CTRL_REG4        0x0008  /* MMC1 CTRL REGISTER 4 */
+#define PCM990_CTRL_MMC1PWR     0x0001 /* RW MMC1 Power on */
+
+#define PCM990_CTRL_REG5        0x000A  /* MMC2 CTRL REGISTER 5 */
+#define PCM990_CTRL_MMC2PWR     0x0001  /* RW MMC2 Power on */
+#define PCM990_CTRL_MMC2LED     0x0002  /* RW MMC2 LED */
+#define PCM990_CTRL_MMC2DE      0x0004  /* R MMC2 Card detect */
+#define PCM990_CTRL_MMC2WP      0x0008  /* R MMC2 Card write protect */
+
+#define PCM990_CTRL_REG6        0x000C  /* Interrupt Clear REGISTER */
+#define PCM990_CTRL_INTC0       0x0001  /* Clear Reg BT Detect */
+#define PCM990_CTRL_INTC1       0x0002  /* Clear Reg FR RI */
+#define PCM990_CTRL_INTC2       0x0004  /* Clear Reg MMC1 Detect */
+#define PCM990_CTRL_INTC3       0x0008  /* Clear Reg PM_5V off */
+
+#define PCM990_CTRL_REG7        0x000E  /* Interrupt Enable REGISTER */
+#define PCM990_CTRL_ENAINT0     0x0001  /* Enable Int BT Detect */
+#define PCM990_CTRL_ENAINT1     0x0002  /* Enable Int FR RI */
+#define PCM990_CTRL_ENAINT2     0x0004  /* Enable Int MMC1 Detect */
+#define PCM990_CTRL_ENAINT3     0x0008  /* Enable Int PM_5V off */
+
+#define PCM990_CTRL_REG8        0x0014  /* Uart REGISTER */
+#define PCM990_CTRL_FFSD        0x0001  /* BT Uart Enable */
+#define PCM990_CTRL_BTSD        0x0002  /* FF Uart Enable */
+#define PCM990_CTRL_FFRI        0x0004  /* FF Uart RI detect */
+#define PCM990_CTRL_BTRX        0x0008  /* BT Uart Rx detect */
+
+#define PCM990_CTRL_REG9        0x0010  /* AC97 Flash REGISTER */
+#define PCM990_CTRL_FLWP        0x0001  /* pC Flash Write Protect */
+#define PCM990_CTRL_FLDIS       0x0002  /* pC Flash Disable */
+#define PCM990_CTRL_AC97ENA     0x0004  /* Enable AC97 Expansion */
+
+#define PCM990_CTRL_REG10       0x0012  /* GPS-REGISTER */
+#define PCM990_CTRL_GPSPWR      0x0004  /* GPS-Modul Power on */
+#define PCM990_CTRL_GPSENA      0x0008  /* GPS-Modul Enable */
+
+#define PCM990_CTRL_REG11       0x0014  /* Accu REGISTER */
+#define PCM990_CTRL_ACENA       0x0001  /* Charge Enable */
+#define PCM990_CTRL_ACSEL       0x0002  /* Charge Akku -> DC Enable */
+#define PCM990_CTRL_ACPRES      0x0004  /* DC Present */
+#define PCM990_CTRL_ACALARM     0x0008  /* Error Akku */
+
+#define PCM990_CTRL_P2V(x)      ((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
+#define PCM990_CTRL_V2P(x)      ((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __PCM990_CTRL_REG(x) \
+                (*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
+#else
+#  define __PCM990_CTRL_REG(x)  PCM990_CTRL_P2V(x)
+#endif
+
+#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL0    __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
+#define PCM990_CTRL1    __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
+#define PCM990_CTRL2    __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
+#define PCM990_CTRL3    __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
+#define PCM990_CTRL4    __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
+#define PCM990_CTRL5    __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
+#define PCM990_CTRL6    __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL7    __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_CTRL8    __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
+#define PCM990_CTRL9    __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
+#define PCM990_CTRL10   __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
+#define PCM990_CTRL11   __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
+
+
+/*
+ * IDE
+ */
+#define PCM990_IDE_IRQ_GPIO     13
+#define PCM990_IDE_IRQ          IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
+#define PCM990_IDE_IRQ_EDGE     IRQ_TYPE_EDGE_RISING
+#define PCM990_IDE_PLD_PHYS     0x20000000      /* 16 bit wide */
+#define PCM990_IDE_PLD_BASE     0xee000000
+#define PCM990_IDE_PLD_SIZE     (1*1024*1024)
+
+/* visible CPLD (U6) registers */
+#define PCM990_IDE_PLD_REG0     0x1000  /* OFFSET IDE REGISTER 0 */
+#define PCM990_IDE_PM5V         0x0004  /* R System VCC_5V */
+#define PCM990_IDE_STBY         0x0008  /* R System StandBy */
+
+#define PCM990_IDE_PLD_REG1     0x1002  /* OFFSET IDE REGISTER 1 */
+#define PCM990_IDE_IDEMODE      0x0001  /* R TrueIDE Mode */
+#define PCM990_IDE_DMAENA       0x0004  /* RW DMA Enable */
+#define PCM990_IDE_DMA1_0       0x0008  /* RW 1=DREQ1 0=DREQ0 */
+
+#define PCM990_IDE_PLD_REG2     0x1004  /* OFFSET IDE REGISTER 2 */
+#define PCM990_IDE_RESENA       0x0001  /* RW IDE Reset Bit enable */
+#define PCM990_IDE_RES          0x0002  /* RW IDE Reset Bit */
+#define PCM990_IDE_RDY          0x0008  /* RDY */
+
+#define PCM990_IDE_PLD_REG3     0x1006  /* OFFSET IDE REGISTER 3 */
+#define PCM990_IDE_IDEOE        0x0001  /* RW Latch on Databus */
+#define PCM990_IDE_IDEON        0x0002  /* RW Latch on Control Address */
+#define PCM990_IDE_IDEIN        0x0004  /* RW Latch on Interrupt usw. */
+
+#define PCM990_IDE_PLD_REG4     0x1008  /* OFFSET IDE REGISTER 4 */
+#define PCM990_IDE_PWRENA       0x0001  /* RW IDE Power enable */
+#define PCM990_IDE_5V           0x0002  /* R IDE Power 5V */
+#define PCM990_IDE_PWG          0x0008  /* R IDE Power is on */
+
+#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
+#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
+
+#ifndef __ASSEMBLY__
+# define  __PCM990_IDE_PLD_REG(x) \
+        (*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
+#else
+# define  __PCM990_IDE_PLD_REG(x)       PCM990_IDE_PLD_P2V(x)
+#endif
+
+#define PCM990_IDE0 \
+        __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
+#define PCM990_IDE1 \
+        __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
+#define PCM990_IDE2 \
+        __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
+#define PCM990_IDE3 \
+        __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
+#define PCM990_IDE4 \
+        __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
+
+/*
+ * Compact Flash
+ */
+#define PCM990_CF_IRQ_GPIO      11
+#define PCM990_CF_IRQ           IRQ_GPIO(PCM990_CF_IRQ_GPIO)
+#define PCM990_CF_IRQ_EDGE      IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_CD_GPIO       12
+#define PCM990_CF_CD            IRQ_GPIO(PCM990_CF_CD_GPIO)
+#define PCM990_CF_CD_EDGE       IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_PLD_PHYS      0x30000000      /* 16 bit wide */
+#define PCM990_CF_PLD_BASE      0xef000000
+#define PCM990_CF_PLD_SIZE      (1*1024*1024)
+#define PCM990_CF_PLD_P2V(x)    ((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
+#define PCM990_CF_PLD_V2P(x)    ((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
+
+/* visible CPLD (U6) registers */
+#define PCM990_CF_PLD_REG0      0x1000  /* OFFSET CF REGISTER 0 */
+#define PCM990_CF_REG0_LED      0x0001  /* RW LED on */
+#define PCM990_CF_REG0_BLK      0x0002  /* RW LED flash when access */
+#define PCM990_CF_REG0_PM5V     0x0004  /* R System VCC_5V enable */
+#define PCM990_CF_REG0_STBY     0x0008  /* R System StandBy */
+
+#define PCM990_CF_PLD_REG1      0x1002  /* OFFSET CF REGISTER 1 */
+#define PCM990_CF_REG1_IDEMODE  0x0001  /* RW CF card run as TrueIDE */
+#define PCM990_CF_REG1_CF0      0x0002  /* RW CF card at ADDR 0x28000000 */
+
+#define PCM990_CF_PLD_REG2      0x1004  /* OFFSET CF REGISTER 2 */
+#define PCM990_CF_REG2_RES      0x0002  /* RW CF RESET BIT */
+#define PCM990_CF_REG2_RDYENA   0x0004  /* RW Enable CF_RDY */
+#define PCM990_CF_REG2_RDY      0x0008  /* R CF_RDY auf PWAIT */
+
+#define PCM990_CF_PLD_REG3      0x1006  /* OFFSET CF REGISTER 3 */
+#define PCM990_CF_REG3_CFOE     0x0001  /* RW Latch on Databus */
+#define PCM990_CF_REG3_CFON     0x0002  /* RW Latch on Control Address */
+#define PCM990_CF_REG3_CFIN     0x0004  /* RW Latch on Interrupt usw. */
+#define PCM990_CF_REG3_CFCD     0x0008  /* RW Latch on CD1/2 VS1/2 usw */
+
+#define PCM990_CF_PLD_REG4      0x1008  /* OFFSET CF REGISTER 4 */
+#define PCM990_CF_REG4_PWRENA   0x0001  /* RW CF Power on (CD1/2 = "00") */
+#define PCM990_CF_REG4_5_3V     0x0002  /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
+#define PCM990_CF_REG4_3B       0x0004  /* RW 3.0V Backup from VCC (5_3V=0) */
+#define PCM990_CF_REG4_PWG      0x0008  /* R CF-Power is on */
+
+#define PCM990_CF_PLD_REG5      0x100A  /* OFFSET CF REGISTER 5 */
+#define PCM990_CF_REG5_BVD1     0x0001  /* R CF /BVD1 */
+#define PCM990_CF_REG5_BVD2     0x0002  /* R CF /BVD2 */
+#define PCM990_CF_REG5_VS1      0x0004  /* R CF /VS1 */
+#define PCM990_CF_REG5_VS2      0x0008  /* R CF /VS2 */
+
+#define PCM990_CF_PLD_REG6      0x100C  /* OFFSET CF REGISTER 6 */
+#define PCM990_CF_REG6_CD1      0x0001  /* R CF Card_Detect1 */
+#define PCM990_CF_REG6_CD2      0x0002  /* R CF Card_Detect2 */
+
+#ifndef __ASSEMBLY__
+#  define  __PCM990_CF_PLD_REG(x) \
+        (*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
+#else
+#  define  __PCM990_CF_PLD_REG(x)       PCM990_CF_PLD_P2V(x)
+#endif
+
+#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
+#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
+#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
+#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
+#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
+#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
+#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
+
+/*
+ * Wolfson AC97 Touch
+ */
+#define PCM990_AC97_IRQ_GPIO    10
+#define PCM990_AC97_IRQ         IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
+#define PCM990_AC97_IRQ_EDGE    IRQ_TYPE_EDGE_RISING
+
+/*
+ * MMC phyCORE
+ */
+#define PCM990_MMC0_IRQ_GPIO    9
+#define PCM990_MMC0_IRQ         IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
+#define PCM990_MMC0_IRQ_EDGE    IRQ_TYPE_EDGE_FALLING
+
+/*
+ * USB phyCore
+ */
+#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
+#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
new file mode 100644
index 000000000000..261e5bc958db
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/suspend.h>
+
+struct pxa_cpu_pm_fns {
+        int     save_count;
+        void    (*save)(unsigned long *);
+        void    (*restore)(unsigned long *);
+        int     (*valid)(suspend_state_t state);
+        void    (*enter)(suspend_state_t state);
+};
+
+extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
+
+/* sleep.S */
+extern void pxa25x_cpu_suspend(unsigned int);
+extern void pxa27x_cpu_suspend(unsigned int);
+extern void pxa_cpu_resume(void);
+
+extern int pxa_pm_enter(suspend_state_t state);
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
new file mode 100644
index 000000000000..8956afe8195e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-pxa/include/mach/poodle.h
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on:
+ *   arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * ChangeLog:
+ *   04-06-2001 Lineo Japan, Inc.
+ *   04-16-2001 SHARP Corporation
+ *   Update to 2.6 John Lenz
+ */
+#ifndef __ASM_ARCH_POODLE_H
+#define __ASM_ARCH_POODLE_H  1
+
+/*
+ * GPIOs
+ */
+/* PXA GPIOs */
+#define POODLE_GPIO_ON_KEY              (0)
+#define POODLE_GPIO_AC_IN               (1)
+#define POODLE_GPIO_CO                  16
+#define POODLE_GPIO_TP_INT              (5)
+#define POODLE_GPIO_WAKEUP              (11)    /* change battery */
+#define POODLE_GPIO_GA_INT              (10)
+#define POODLE_GPIO_IR_ON               (22)
+#define POODLE_GPIO_HP_IN               (4)
+#define POODLE_GPIO_CF_IRQ              (17)
+#define POODLE_GPIO_CF_CD               (14)
+#define POODLE_GPIO_CF_STSCHG           (14)
+#define POODLE_GPIO_SD_PWR              (33)
+#define POODLE_GPIO_SD_PWR1             (3)
+#define POODLE_GPIO_nSD_CLK             (6)
+#define POODLE_GPIO_nSD_WP              (7)
+#define POODLE_GPIO_nSD_INT             (8)
+#define POODLE_GPIO_nSD_DETECT          (9)
+#define POODLE_GPIO_MAIN_BAT_LOW        (13)
+#define POODLE_GPIO_BAT_COVER           (13)
+#define POODLE_GPIO_USB_PULLUP          (20)
+#define POODLE_GPIO_ADC_TEMP_ON         (21)
+#define POODLE_GPIO_BYPASS_ON           (36)
+#define POODLE_GPIO_CHRG_ON             (38)
+#define POODLE_GPIO_CHRG_FULL           (16)
+#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
+
+/* PXA GPIOs */
+#define POODLE_IRQ_GPIO_ON_KEY          IRQ_GPIO(0)
+#define POODLE_IRQ_GPIO_AC_IN           IRQ_GPIO(1)
+#define POODLE_IRQ_GPIO_HP_IN           IRQ_GPIO(4)
+#define POODLE_IRQ_GPIO_CO              IRQ_GPIO(16)
+#define POODLE_IRQ_GPIO_TP_INT          IRQ_GPIO(5)
+#define POODLE_IRQ_GPIO_WAKEUP          IRQ_GPIO(11)
+#define POODLE_IRQ_GPIO_GA_INT          IRQ_GPIO(10)
+#define POODLE_IRQ_GPIO_CF_IRQ          IRQ_GPIO(17)
+#define POODLE_IRQ_GPIO_CF_CD           IRQ_GPIO(14)
+#define POODLE_IRQ_GPIO_nSD_INT         IRQ_GPIO(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT      IRQ_GPIO(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW    IRQ_GPIO(13)
+
+/* SCOOP GPIOs */
+#define POODLE_SCOOP_CHARGE_ON  SCOOP_GPCR_PA11
+#define POODLE_SCOOP_CP401      SCOOP_GPCR_PA13
+#define POODLE_SCOOP_VPEN       SCOOP_GPCR_PA18
+#define POODLE_SCOOP_L_PCLK     SCOOP_GPCR_PA20
+#define POODLE_SCOOP_L_LCLK     SCOOP_GPCR_PA21
+#define POODLE_SCOOP_HS_OUT     SCOOP_GPCR_PA22
+
+#define POODLE_SCOOP_IO_DIR     ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
+#define POODLE_SCOOP_IO_OUT     ( 0 )
+
+extern struct platform_device poodle_locomo_device;
+
+#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
new file mode 100644
index 000000000000..12288ca3cbb2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -0,0 +1,1070 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxa-regs.h
+ *
+ *  Author:     Nicolas Pitre
+ *  Created:    Jun 15, 2001
+ *  Copyright:  MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA_REGS_H
+#define __PXA_REGS_H
+
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS    0x00000000
+#define PXA_CS1_PHYS    0x04000000
+#define PXA_CS2_PHYS    0x08000000
+#define PXA_CS3_PHYS    0x0C000000
+#define PXA_CS4_PHYS    0x10000000
+#define PXA_CS5_PHYS    0x14000000
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp     0x04000000      /* PCMCIA Partition Space [byte]   */
+#define PCMCIASp        (4*PCMCIAPrtSp) /* PCMCIA Space [byte]             */
+#define PCMCIAIOSp      PCMCIAPrtSp     /* PCMCIA I/O Space [byte]         */
+#define PCMCIAAttrSp    PCMCIAPrtSp     /* PCMCIA Attribute Space [byte]   */
+#define PCMCIAMemSp     PCMCIAPrtSp     /* PCMCIA Memory Space [byte]      */
+
+#define PCMCIA0Sp       PCMCIASp        /* PCMCIA 0 Space [byte]           */
+#define PCMCIA0IOSp     PCMCIAIOSp      /* PCMCIA 0 I/O Space [byte]       */
+#define PCMCIA0AttrSp   PCMCIAAttrSp    /* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp    PCMCIAMemSp     /* PCMCIA 0 Memory Space [byte]    */
+
+#define PCMCIA1Sp       PCMCIASp        /* PCMCIA 1 Space [byte]           */
+#define PCMCIA1IOSp     PCMCIAIOSp      /* PCMCIA 1 I/O Space [byte]       */
+#define PCMCIA1AttrSp   PCMCIAAttrSp    /* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp    PCMCIAMemSp     /* PCMCIA 1 Memory Space [byte]    */
+
+#define _PCMCIA(Nb)                     /* PCMCIA [0..1]                   */ \
+                        (0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb)   _PCMCIA (Nb)    /* PCMCIA I/O [0..1]               */
+#define _PCMCIAAttr(Nb)                 /* PCMCIA Attribute [0..1]         */ \
+                        (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb)                  /* PCMCIA Memory [0..1]            */ \
+                        (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0        _PCMCIA (0)     /* PCMCIA 0                        */
+#define _PCMCIA0IO      _PCMCIAIO (0)   /* PCMCIA 0 I/O                    */
+#define _PCMCIA0Attr    _PCMCIAAttr (0) /* PCMCIA 0 Attribute              */
+#define _PCMCIA0Mem     _PCMCIAMem (0)  /* PCMCIA 0 Memory                 */
+
+#define _PCMCIA1        _PCMCIA (1)     /* PCMCIA 1                        */
+#define _PCMCIA1IO      _PCMCIAIO (1)   /* PCMCIA 1 I/O                    */
+#define _PCMCIA1Attr    _PCMCIAAttr (1) /* PCMCIA 1 Attribute              */
+#define _PCMCIA1Mem     _PCMCIAMem (1)  /* PCMCIA 1 Memory                 */
+
+
+
+/*
+ * DMA Controller
+ */
+
+#define DCSR0           __REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
+#define DCSR1           __REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
+#define DCSR2           __REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
+#define DCSR3           __REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
+#define DCSR4           __REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
+#define DCSR5           __REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
+#define DCSR6           __REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
+#define DCSR7           __REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
+#define DCSR8           __REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
+#define DCSR9           __REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
+#define DCSR10          __REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
+#define DCSR11          __REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
+#define DCSR12          __REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
+#define DCSR13          __REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
+#define DCSR14          __REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
+#define DCSR15          __REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
+
+#define DCSR(x)         __REG2(0x40000000, (x) << 2)
+
+#define DCSR_RUN        (1 << 31)       /* Run Bit (read / write) */
+#define DCSR_NODESC     (1 << 30)       /* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN  (1 << 29)       /* Stop Interrupt Enable (read / write) */
+#ifdef CONFIG_PXA27x
+#define DCSR_EORIRQEN   (1 << 28)       /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN   (1 << 27)       /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN  (1 << 26)       /* STOP on an EOR */
+#define DCSR_SETCMPST   (1 << 25)       /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST   (1 << 24)       /* Clear Descriptor Compare Status */
+#define DCSR_CMPST      (1 << 10)       /* The Descriptor Compare Status */
+#define DCSR_EORINTR    (1 << 9)        /* The end of Receive */
+#endif
+#define DCSR_REQPEND    (1 << 8)        /* Request Pending (read-only) */
+#define DCSR_STOPSTATE  (1 << 3)        /* Stop State (read-only) */
+#define DCSR_ENDINTR    (1 << 2)        /* End Interrupt (read / write) */
+#define DCSR_STARTINTR  (1 << 1)        /* Start Interrupt (read / write) */
+#define DCSR_BUSERR     (1 << 0)        /* Bus Error Interrupt (read / write) */
+
+#define DALGN           __REG(0x400000a0)  /* DMA Alignment Register */
+#define DINT            __REG(0x400000f0)  /* DMA Interrupt Register */
+
+#define DRCMR(n)        (*(((n) < 64) ? \
+                        &__REG2(0x40000100, ((n) & 0x3f) << 2) : \
+                        &__REG2(0x40001100, ((n) & 0x3f) << 2)))
+
+#define DRCMR0          __REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
+#define DRCMR1          __REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
+#define DRCMR2          __REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
+#define DRCMR3          __REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
+#define DRCMR4          __REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
+#define DRCMR5          __REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
+#define DRCMR6          __REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
+#define DRCMR7          __REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
+#define DRCMR8          __REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
+#define DRCMR9          __REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
+#define DRCMR10         __REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
+#define DRCMR11         __REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
+#define DRCMR12         __REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
+#define DRCMR13         __REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
+#define DRCMR14         __REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
+#define DRCMR15         __REG(0x4000013c)  /* Request to Channel Map Register for SSP2 receive Request */
+#define DRCMR16         __REG(0x40000140)  /* Request to Channel Map Register for SSP2 transmit Request */
+#define DRCMR17         __REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
+#define DRCMR18         __REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
+#define DRCMR19         __REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
+#define DRCMR20         __REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
+#define DRCMR21         __REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
+#define DRCMR22         __REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
+#define DRCMR23         __REG(0x4000015c)  /* Reserved */
+#define DRCMR24         __REG(0x40000160)  /* Reserved */
+#define DRCMR25         __REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
+#define DRCMR26         __REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
+#define DRCMR27         __REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
+#define DRCMR28         __REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
+#define DRCMR29         __REG(0x40000174)  /* Reserved */
+#define DRCMR30         __REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
+#define DRCMR31         __REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
+#define DRCMR32         __REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
+#define DRCMR33         __REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
+#define DRCMR34         __REG(0x40000188)  /* Reserved */
+#define DRCMR35         __REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
+#define DRCMR36         __REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
+#define DRCMR37         __REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
+#define DRCMR38         __REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
+#define DRCMR39         __REG(0x4000019C)  /* Reserved */
+#define DRCMR66         __REG(0x40001108)  /* Request to Channel Map Register for SSP3 receive Request */
+#define DRCMR67         __REG(0x4000110C)  /* Request to Channel Map Register for SSP3 transmit Request */
+#define DRCMR68         __REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
+#define DRCMR69         __REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
+#define DRCMR70         __REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */
+
+#define DRCMRRXSADR     DRCMR2
+#define DRCMRTXSADR     DRCMR3
+#define DRCMRRXBTRBR    DRCMR4
+#define DRCMRTXBTTHR    DRCMR5
+#define DRCMRRXFFRBR    DRCMR6
+#define DRCMRTXFFTHR    DRCMR7
+#define DRCMRRXMCDR     DRCMR8
+#define DRCMRRXMODR     DRCMR9
+#define DRCMRTXMODR     DRCMR10
+#define DRCMRRXPCDR     DRCMR11
+#define DRCMRTXPCDR     DRCMR12
+#define DRCMRRXSSDR     DRCMR13
+#define DRCMRTXSSDR     DRCMR14
+#define DRCMRRXSS2DR   DRCMR15
+#define DRCMRTXSS2DR   DRCMR16
+#define DRCMRRXICDR     DRCMR17
+#define DRCMRTXICDR     DRCMR18
+#define DRCMRRXSTRBR    DRCMR19
+#define DRCMRTXSTTHR    DRCMR20
+#define DRCMRRXMMC      DRCMR21
+#define DRCMRTXMMC      DRCMR22
+#define DRCMRRXSS3DR   DRCMR66
+#define DRCMRTXSS3DR   DRCMR67
+#define DRCMRUDC(x)     DRCMR((x) + 24)
+
+#define DRCMR_MAPVLD    (1 << 7)        /* Map Valid (read / write) */
+#define DRCMR_CHLNUM    0x1f            /* mask for Channel Number (read / write) */
+
+#define DDADR0          __REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
+#define DSADR0          __REG(0x40000204)  /* DMA Source Address Register Channel 0 */
+#define DTADR0          __REG(0x40000208)  /* DMA Target Address Register Channel 0 */
+#define DCMD0           __REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
+#define DDADR1          __REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
+#define DSADR1          __REG(0x40000214)  /* DMA Source Address Register Channel 1 */
+#define DTADR1          __REG(0x40000218)  /* DMA Target Address Register Channel 1 */
+#define DCMD1           __REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
+#define DDADR2          __REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
+#define DSADR2          __REG(0x40000224)  /* DMA Source Address Register Channel 2 */
+#define DTADR2          __REG(0x40000228)  /* DMA Target Address Register Channel 2 */
+#define DCMD2           __REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
+#define DDADR3          __REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
+#define DSADR3          __REG(0x40000234)  /* DMA Source Address Register Channel 3 */
+#define DTADR3          __REG(0x40000238)  /* DMA Target Address Register Channel 3 */
+#define DCMD3           __REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
+#define DDADR4          __REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
+#define DSADR4          __REG(0x40000244)  /* DMA Source Address Register Channel 4 */
+#define DTADR4          __REG(0x40000248)  /* DMA Target Address Register Channel 4 */
+#define DCMD4           __REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
+#define DDADR5          __REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
+#define DSADR5          __REG(0x40000254)  /* DMA Source Address Register Channel 5 */
+#define DTADR5          __REG(0x40000258)  /* DMA Target Address Register Channel 5 */
+#define DCMD5           __REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
+#define DDADR6          __REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
+#define DSADR6          __REG(0x40000264)  /* DMA Source Address Register Channel 6 */
+#define DTADR6          __REG(0x40000268)  /* DMA Target Address Register Channel 6 */
+#define DCMD6           __REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
+#define DDADR7          __REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
+#define DSADR7          __REG(0x40000274)  /* DMA Source Address Register Channel 7 */
+#define DTADR7          __REG(0x40000278)  /* DMA Target Address Register Channel 7 */
+#define DCMD7           __REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
+#define DDADR8          __REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
+#define DSADR8          __REG(0x40000284)  /* DMA Source Address Register Channel 8 */
+#define DTADR8          __REG(0x40000288)  /* DMA Target Address Register Channel 8 */
+#define DCMD8           __REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
+#define DDADR9          __REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
+#define DSADR9          __REG(0x40000294)  /* DMA Source Address Register Channel 9 */
+#define DTADR9          __REG(0x40000298)  /* DMA Target Address Register Channel 9 */
+#define DCMD9           __REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
+#define DDADR10         __REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
+#define DSADR10         __REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
+#define DTADR10         __REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
+#define DCMD10          __REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
+#define DDADR11         __REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
+#define DSADR11         __REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
+#define DTADR11         __REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
+#define DCMD11          __REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
+#define DDADR12         __REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
+#define DSADR12         __REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
+#define DTADR12         __REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
+#define DCMD12          __REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
+#define DDADR13         __REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
+#define DSADR13         __REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
+#define DTADR13         __REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
+#define DCMD13          __REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
+#define DDADR14         __REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
+#define DSADR14         __REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
+#define DTADR14         __REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
+#define DCMD14          __REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
+#define DDADR15         __REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
+#define DSADR15         __REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
+#define DTADR15         __REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
+#define DCMD15          __REG(0x400002fc)  /* DMA Command Address Register Channel 15 */
+
+#define DDADR(x)        __REG2(0x40000200, (x) << 4)
+#define DSADR(x)        __REG2(0x40000204, (x) << 4)
+#define DTADR(x)        __REG2(0x40000208, (x) << 4)
+#define DCMD(x)         __REG2(0x4000020c, (x) << 4)
+
+#define DDADR_DESCADDR  0xfffffff0      /* Address of next descriptor (mask) */
+#define DDADR_STOP      (1 << 0)        /* Stop (read / write) */
+
+#define DCMD_INCSRCADDR (1 << 31)       /* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30)       /* Target Address Increment Setting. */
+#define DCMD_FLOWSRC    (1 << 29)       /* Flow Control by the source. */
+#define DCMD_FLOWTRG    (1 << 28)       /* Flow Control by the target. */
+#define DCMD_STARTIRQEN (1 << 22)       /* Start Interrupt Enable */
+#define DCMD_ENDIRQEN   (1 << 21)       /* End Interrupt Enable */
+#define DCMD_ENDIAN     (1 << 18)       /* Device Endian-ness. */
+#define DCMD_BURST8     (1 << 16)       /* 8 byte burst */
+#define DCMD_BURST16    (2 << 16)       /* 16 byte burst */
+#define DCMD_BURST32    (3 << 16)       /* 32 byte burst */
+#define DCMD_WIDTH1     (1 << 14)       /* 1 byte width */
+#define DCMD_WIDTH2     (2 << 14)       /* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4     (3 << 14)       /* 4 byte width (Word) */
+#define DCMD_LENGTH     0x01fff         /* length mask (max = 8K - 1) */
+
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART          FFRBR
+#define FFRBR           __REG(0x40100000)  /* Receive Buffer Register (read only) */
+#define FFTHR           __REG(0x40100000)  /* Transmit Holding Register (write only) */
+#define FFIER           __REG(0x40100004)  /* Interrupt Enable Register (read/write) */
+#define FFIIR           __REG(0x40100008)  /* Interrupt ID Register (read only) */
+#define FFFCR           __REG(0x40100008)  /* FIFO Control Register (write only) */
+#define FFLCR           __REG(0x4010000C)  /* Line Control Register (read/write) */
+#define FFMCR           __REG(0x40100010)  /* Modem Control Register (read/write) */
+#define FFLSR           __REG(0x40100014)  /* Line Status Register (read only) */
+#define FFMSR           __REG(0x40100018)  /* Modem Status Register (read only) */
+#define FFSPR           __REG(0x4010001C)  /* Scratch Pad Register (read/write) */
+#define FFISR           __REG(0x40100020)  /* Infrared Selection Register (read/write) */
+#define FFDLL           __REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH           __REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART          BTRBR
+#define BTRBR           __REG(0x40200000)  /* Receive Buffer Register (read only) */
+#define BTTHR           __REG(0x40200000)  /* Transmit Holding Register (write only) */
+#define BTIER           __REG(0x40200004)  /* Interrupt Enable Register (read/write) */
+#define BTIIR           __REG(0x40200008)  /* Interrupt ID Register (read only) */
+#define BTFCR           __REG(0x40200008)  /* FIFO Control Register (write only) */
+#define BTLCR           __REG(0x4020000C)  /* Line Control Register (read/write) */
+#define BTMCR           __REG(0x40200010)  /* Modem Control Register (read/write) */
+#define BTLSR           __REG(0x40200014)  /* Line Status Register (read only) */
+#define BTMSR           __REG(0x40200018)  /* Modem Status Register (read only) */
+#define BTSPR           __REG(0x4020001C)  /* Scratch Pad Register (read/write) */
+#define BTISR           __REG(0x40200020)  /* Infrared Selection Register (read/write) */
+#define BTDLL           __REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH           __REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART          STRBR
+#define STRBR           __REG(0x40700000)  /* Receive Buffer Register (read only) */
+#define STTHR           __REG(0x40700000)  /* Transmit Holding Register (write only) */
+#define STIER           __REG(0x40700004)  /* Interrupt Enable Register (read/write) */
+#define STIIR           __REG(0x40700008)  /* Interrupt ID Register (read only) */
+#define STFCR           __REG(0x40700008)  /* FIFO Control Register (write only) */
+#define STLCR           __REG(0x4070000C)  /* Line Control Register (read/write) */
+#define STMCR           __REG(0x40700010)  /* Modem Control Register (read/write) */
+#define STLSR           __REG(0x40700014)  /* Line Status Register (read only) */
+#define STMSR           __REG(0x40700018)  /* Reserved */
+#define STSPR           __REG(0x4070001C)  /* Scratch Pad Register (read/write) */
+#define STISR           __REG(0x40700020)  /* Infrared Selection Register (read/write) */
+#define STDLL           __REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH           __REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Hardware UART (HWUART) */
+#define HWUART          HWRBR
+#define HWRBR           __REG(0x41600000)  /* Receive Buffer Register (read only) */
+#define HWTHR           __REG(0x41600000)  /* Transmit Holding Register (write only) */
+#define HWIER           __REG(0x41600004)  /* Interrupt Enable Register (read/write) */
+#define HWIIR           __REG(0x41600008)  /* Interrupt ID Register (read only) */
+#define HWFCR           __REG(0x41600008)  /* FIFO Control Register (write only) */
+#define HWLCR           __REG(0x4160000C)  /* Line Control Register (read/write) */
+#define HWMCR           __REG(0x41600010)  /* Modem Control Register (read/write) */
+#define HWLSR           __REG(0x41600014)  /* Line Status Register (read only) */
+#define HWMSR           __REG(0x41600018)  /* Modem Status Register (read only) */
+#define HWSPR           __REG(0x4160001C)  /* Scratch Pad Register (read/write) */
+#define HWISR           __REG(0x41600020)  /* Infrared Selection Register (read/write) */
+#define HWFOR           __REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
+#define HWABR           __REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
+#define HWACR           __REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
+#define HWDLL           __REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH           __REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE        (1 << 7)        /* DMA Requests Enable */
+#define IER_UUE         (1 << 6)        /* UART Unit Enable */
+#define IER_NRZE        (1 << 5)        /* NRZ coding Enable */
+#define IER_RTIOE       (1 << 4)        /* Receiver Time Out Interrupt Enable */
+#define IER_MIE         (1 << 3)        /* Modem Interrupt Enable */
+#define IER_RLSE        (1 << 2)        /* Receiver Line Status Interrupt Enable */
+#define IER_TIE         (1 << 1)        /* Transmit Data request Interrupt Enable */
+#define IER_RAVIE       (1 << 0)        /* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1     (1 << 7)        /* FIFO Mode Enable Status */
+#define IIR_FIFOES0     (1 << 6)        /* FIFO Mode Enable Status */
+#define IIR_TOD         (1 << 3)        /* Time Out Detected */
+#define IIR_IID2        (1 << 2)        /* Interrupt Source Encoded */
+#define IIR_IID1        (1 << 1)        /* Interrupt Source Encoded */
+#define IIR_IP          (1 << 0)        /* Interrupt Pending (active low) */
+
+#define FCR_ITL2        (1 << 7)        /* Interrupt Trigger Level */
+#define FCR_ITL1        (1 << 6)        /* Interrupt Trigger Level */
+#define FCR_RESETTF     (1 << 2)        /* Reset Transmitter FIFO */
+#define FCR_RESETRF     (1 << 1)        /* Reset Receiver FIFO */
+#define FCR_TRFIFOE     (1 << 0)        /* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1       (0)
+#define FCR_ITL_8       (FCR_ITL1)
+#define FCR_ITL_16      (FCR_ITL2)
+#define FCR_ITL_32      (FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB        (1 << 7)        /* Divisor Latch Access Bit */
+#define LCR_SB          (1 << 6)        /* Set Break */
+#define LCR_STKYP       (1 << 5)        /* Sticky Parity */
+#define LCR_EPS         (1 << 4)        /* Even Parity Select */
+#define LCR_PEN         (1 << 3)        /* Parity Enable */
+#define LCR_STB         (1 << 2)        /* Stop Bit */
+#define LCR_WLS1        (1 << 1)        /* Word Length Select */
+#define LCR_WLS0        (1 << 0)        /* Word Length Select */
+
+#define LSR_FIFOE       (1 << 7)        /* FIFO Error Status */
+#define LSR_TEMT        (1 << 6)        /* Transmitter Empty */
+#define LSR_TDRQ        (1 << 5)        /* Transmit Data Request */
+#define LSR_BI          (1 << 4)        /* Break Interrupt */
+#define LSR_FE          (1 << 3)        /* Framing Error */
+#define LSR_PE          (1 << 2)        /* Parity Error */
+#define LSR_OE          (1 << 1)        /* Overrun Error */
+#define LSR_DR          (1 << 0)        /* Data Ready */
+
+#define MCR_LOOP        (1 << 4)
+#define MCR_OUT2        (1 << 3)        /* force MSR_DCD in loopback mode */
+#define MCR_OUT1        (1 << 2)        /* force MSR_RI in loopback mode */
+#define MCR_RTS         (1 << 1)        /* Request to Send */
+#define MCR_DTR         (1 << 0)        /* Data Terminal Ready */
+
+#define MSR_DCD         (1 << 7)        /* Data Carrier Detect */
+#define MSR_RI          (1 << 6)        /* Ring Indicator */
+#define MSR_DSR         (1 << 5)        /* Data Set Ready */
+#define MSR_CTS         (1 << 4)        /* Clear To Send */
+#define MSR_DDCD        (1 << 3)        /* Delta Data Carrier Detect */
+#define MSR_TERI        (1 << 2)        /* Trailing Edge Ring Indicator */
+#define MSR_DDSR        (1 << 1)        /* Delta Data Set Ready */
+#define MSR_DCTS        (1 << 0)        /* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
+#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
+#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
+#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
+#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
+
+
+/*
+ * I2C registers
+ */
+
+#define IBMR            __REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
+#define IDBR            __REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
+#define ICR             __REG(0x40301690)  /* I2C Control Register - ICR */
+#define ISR             __REG(0x40301698)  /* I2C Status Register - ISR */
+#define ISAR            __REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
+
+#define PWRIBMR    __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
+#define PWRIDBR    __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
+#define PWRICR __REG(0x40f00190)  /* Power I2C Control Register - ICR */
+#define PWRISR __REG(0x40f00198)  /* Power I2C Status Register - ISR */
+#define PWRISAR    __REG(0x40f001A0)  /*Power I2C Slave Address Register-ISAR */
+
+#define ICR_START       (1 << 0)           /* start bit */
+#define ICR_STOP        (1 << 1)           /* stop bit */
+#define ICR_ACKNAK      (1 << 2)           /* send ACK(0) or NAK(1) */
+#define ICR_TB          (1 << 3)           /* transfer byte bit */
+#define ICR_MA          (1 << 4)           /* master abort */
+#define ICR_SCLE        (1 << 5)           /* master clock enable */
+#define ICR_IUE         (1 << 6)           /* unit enable */
+#define ICR_GCD         (1 << 7)           /* general call disable */
+#define ICR_ITEIE       (1 << 8)           /* enable tx interrupts */
+#define ICR_IRFIE       (1 << 9)           /* enable rx interrupts */
+#define ICR_BEIE        (1 << 10)          /* enable bus error ints */
+#define ICR_SSDIE       (1 << 11)          /* slave STOP detected int enable */
+#define ICR_ALDIE       (1 << 12)          /* enable arbitration interrupt */
+#define ICR_SADIE       (1 << 13)          /* slave address detected int enable */
+#define ICR_UR          (1 << 14)          /* unit reset */
+
+#define ISR_RWM         (1 << 0)           /* read/write mode */
+#define ISR_ACKNAK      (1 << 1)           /* ack/nak status */
+#define ISR_UB          (1 << 2)           /* unit busy */
+#define ISR_IBB         (1 << 3)           /* bus busy */
+#define ISR_SSD         (1 << 4)           /* slave stop detected */
+#define ISR_ALD         (1 << 5)           /* arbitration loss detected */
+#define ISR_ITE         (1 << 6)           /* tx buffer empty */
+#define ISR_IRF         (1 << 7)           /* rx buffer full */
+#define ISR_GCAD        (1 << 8)           /* general call address detected */
+#define ISR_SAD         (1 << 9)           /* slave address detected */
+#define ISR_BED         (1 << 10)          /* bus error no ACK/NAK */
+
+
+/*
+ * Serial Audio Controller
+ */
+
+#define SACR0           __REG(0x40400000)  /* Global Control Register */
+#define SACR1           __REG(0x40400004)  /* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0           __REG(0x4040000C)  /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR           __REG(0x40400014)  /* Serial Audio Interrupt Mask Register */
+#define SAICR           __REG(0x40400018)  /* Serial Audio Interrupt Clear Register */
+#define SADIV           __REG(0x40400060)  /* Audio Clock Divider Register. */
+#define SADR            __REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
+
+#define SACR0_RFTH(x)   ((x) << 12)     /* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x)   ((x) << 8)      /* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_STRF      (1 << 5)        /* FIFO Select for EFWR Special Function */
+#define SACR0_EFWR      (1 << 4)        /* Enable EFWR Function  */
+#define SACR0_RST       (1 << 3)        /* FIFO, i2s Register Reset */
+#define SACR0_BCKD      (1 << 2)        /* Bit Clock Direction */
+#define SACR0_ENB       (1 << 0)        /* Enable I2S Link */
+#define SACR1_ENLBF     (1 << 5)        /* Enable Loopback */
+#define SACR1_DRPL      (1 << 4)        /* Disable Replaying Function */
+#define SACR1_DREC      (1 << 3)        /* Disable Recording Function */
+#define SACR1_AMSL      (1 << 0)        /* Specify Alternate Mode */
+
+#define SASR0_I2SOFF    (1 << 7)        /* Controller Status */
+#define SASR0_ROR       (1 << 6)        /* Rx FIFO Overrun */
+#define SASR0_TUR       (1 << 5)        /* Tx FIFO Underrun */
+#define SASR0_RFS       (1 << 4)        /* Rx FIFO Service Request */
+#define SASR0_TFS       (1 << 3)        /* Tx FIFO Service Request */
+#define SASR0_BSY       (1 << 2)        /* I2S Busy */
+#define SASR0_RNE       (1 << 1)        /* Rx FIFO Not Empty */
+#define SASR0_TNF       (1 << 0)        /* Tx FIFO Not Empty */
+
+#define SAICR_ROR       (1 << 6)        /* Clear Rx FIFO Overrun Interrupt */
+#define SAICR_TUR       (1 << 5)        /* Clear Tx FIFO Underrun Interrupt */
+
+#define SAIMR_ROR       (1 << 6)        /* Enable Rx FIFO Overrun Condition Interrupt */
+#define SAIMR_TUR       (1 << 5)        /* Enable Tx FIFO Underrun Condition Interrupt */
+#define SAIMR_RFS       (1 << 4)        /* Enable Rx FIFO Service Interrupt */
+#define SAIMR_TFS       (1 << 3)        /* Enable Tx FIFO Service Interrupt */
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR            __REG(0x40500000)  /* PCM Out Control Register */
+#define POCR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */
+#define POCR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */
+
+#define PICR            __REG(0x40500004)  /* PCM In Control Register */
+#define PICR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */
+#define PICR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */
+
+#define MCCR            __REG(0x40500008)  /* Mic In Control Register */
+#define MCCR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */
+
+#define GCR             __REG(0x4050000C)  /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB      (1 << 31)       /* Internal clock enable */
+#endif
+#define GCR_nDMAEN      (1 << 24)       /* non DMA Enable */
+#define GCR_CDONE_IE    (1 << 19)       /* Command Done Interrupt Enable */
+#define GCR_SDONE_IE    (1 << 18)       /* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN  (1 << 9)        /* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN  (1 << 8)        /* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN  (1 << 5)        /* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN  (1 << 4)        /* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF  (1 << 3)        /* AC-link Shut Off */
+#define GCR_WARM_RST    (1 << 2)        /* AC97 Warm Reset */
+#define GCR_COLD_RST    (1 << 1)        /* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE         (1 << 0)        /* Codec GPI Interrupt Enable */
+
+#define POSR            __REG(0x40500010)  /* PCM Out Status Register */
+#define POSR_FIFOE      (1 << 4)        /* FIFO error */
+#define POSR_FSR        (1 << 2)        /* FIFO Service Request */
+
+#define PISR            __REG(0x40500014)  /* PCM In Status Register */
+#define PISR_FIFOE      (1 << 4)        /* FIFO error */
+#define PISR_EOC        (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR        (1 << 2)        /* FIFO Service Request */
+
+#define MCSR            __REG(0x40500018)  /* Mic In Status Register */
+#define MCSR_FIFOE      (1 << 4)        /* FIFO error */
+#define MCSR_EOC        (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR        (1 << 2)        /* FIFO Service Request */
+
+#define GSR             __REG(0x4050001C)  /* Global Status Register */
+#define GSR_CDONE       (1 << 19)       /* Command Done */
+#define GSR_SDONE       (1 << 18)       /* Status Done */
+#define GSR_RDCS        (1 << 15)       /* Read Completion Status */
+#define GSR_BIT3SLT12   (1 << 14)       /* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12   (1 << 13)       /* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12   (1 << 12)       /* Bit 1 of slot 12 */
+#define GSR_SECRES      (1 << 11)       /* Secondary Resume Interrupt */
+#define GSR_PRIRES      (1 << 10)       /* Primary Resume Interrupt */
+#define GSR_SCR         (1 << 9)        /* Secondary Codec Ready */
+#define GSR_PCR         (1 << 8)        /*  Primary Codec Ready */
+#define GSR_MCINT       (1 << 7)        /* Mic In Interrupt */
+#define GSR_POINT       (1 << 6)        /* PCM Out Interrupt */
+#define GSR_PIINT       (1 << 5)        /* PCM In Interrupt */
+#define GSR_ACOFFD      (1 << 3)        /* AC-link Shut Off Done */
+#define GSR_MOINT       (1 << 2)        /* Modem Out Interrupt */
+#define GSR_MIINT       (1 << 1)        /* Modem In Interrupt */
+#define GSR_GSCI        (1 << 0)        /* Codec GPI Status Change Interrupt */
+
+#define CAR             __REG(0x40500020)  /* CODEC Access Register */
+#define CAR_CAIP        (1 << 0)        /* Codec Access In Progress */
+
+#define PCDR            __REG(0x40500040)  /* PCM FIFO Data Register */
+#define MCDR            __REG(0x40500060)  /* Mic-in FIFO Data Register */
+
+#define MOCR            __REG(0x40500100)  /* Modem Out Control Register */
+#define MOCR_FEIE       (1 << 3)        /* FIFO Error */
+#define MOCR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */
+
+#define MICR            __REG(0x40500108)  /* Modem In Control Register */
+#define MICR_FEIE       (1 << 3)        /* FIFO Error */
+#define MICR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */
+
+#define MOSR            __REG(0x40500110)  /* Modem Out Status Register */
+#define MOSR_FIFOE      (1 << 4)        /* FIFO error */
+#define MOSR_FSR        (1 << 2)        /* FIFO Service Request */
+
+#define MISR            __REG(0x40500118)  /* Modem In Status Register */
+#define MISR_FIFOE      (1 << 4)        /* FIFO error */
+#define MISR_EOC        (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR        (1 << 2)        /* FIFO Service Request */
+
+#define MODR            __REG(0x40500140)  /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE    __REG(0x40500200)  /* Primary Audio Codec */
+#define SAC_REG_BASE    __REG(0x40500300)  /* Secondary Audio Codec */
+#define PMC_REG_BASE    __REG(0x40500400)  /* Primary Modem Codec */
+#define SMC_REG_BASE    __REG(0x40500500)  /* Secondary Modem Codec */
+
+
+/*
+ * Fast Infrared Communication Port
+ */
+
+#define FICP            __REG(0x40800000)  /* Start of FICP area */
+#define ICCR0           __REG(0x40800000)  /* ICP Control Register 0 */
+#define ICCR1           __REG(0x40800004)  /* ICP Control Register 1 */
+#define ICCR2           __REG(0x40800008)  /* ICP Control Register 2 */
+#define ICDR            __REG(0x4080000c)  /* ICP Data Register */
+#define ICSR0           __REG(0x40800014)  /* ICP Status Register 0 */
+#define ICSR1           __REG(0x40800018)  /* ICP Status Register 1 */
+
+#define ICCR0_AME       (1 << 7)        /* Address match enable */
+#define ICCR0_TIE       (1 << 6)        /* Transmit FIFO interrupt enable */
+#define ICCR0_RIE       (1 << 5)        /* Recieve FIFO interrupt enable */
+#define ICCR0_RXE       (1 << 4)        /* Receive enable */
+#define ICCR0_TXE       (1 << 3)        /* Transmit enable */
+#define ICCR0_TUS       (1 << 2)        /* Transmit FIFO underrun select */
+#define ICCR0_LBM       (1 << 1)        /* Loopback mode */
+#define ICCR0_ITR       (1 << 0)        /* IrDA transmission */
+
+#define ICCR2_RXP       (1 << 3)        /* Receive Pin Polarity select */
+#define ICCR2_TXP       (1 << 2)        /* Transmit Pin Polarity select */
+#define ICCR2_TRIG      (3 << 0)        /* Receive FIFO Trigger threshold */
+#define ICCR2_TRIG_8    (0 << 0)        /*      >= 8 bytes */
+#define ICCR2_TRIG_16   (1 << 0)        /*      >= 16 bytes */
+#define ICCR2_TRIG_32   (2 << 0)        /*      >= 32 bytes */
+
+#ifdef CONFIG_PXA27x
+#define ICSR0_EOC       (1 << 6)        /* DMA End of Descriptor Chain */
+#endif
+#define ICSR0_FRE       (1 << 5)        /* Framing error */
+#define ICSR0_RFS       (1 << 4)        /* Receive FIFO service request */
+#define ICSR0_TFS       (1 << 3)        /* Transnit FIFO service request */
+#define ICSR0_RAB       (1 << 2)        /* Receiver abort */
+#define ICSR0_TUR       (1 << 1)        /* Trunsmit FIFO underun */
+#define ICSR0_EIF       (1 << 0)        /* End/Error in FIFO */
+
+#define ICSR1_ROR       (1 << 6)        /* Receiver FIFO underrun  */
+#define ICSR1_CRE       (1 << 5)        /* CRC error */
+#define ICSR1_EOF       (1 << 4)        /* End of frame */
+#define ICSR1_TNF       (1 << 3)        /* Transmit FIFO not full */
+#define ICSR1_RNE       (1 << 2)        /* Receive FIFO not empty */
+#define ICSR1_TBY       (1 << 1)        /* Tramsmiter busy flag */
+#define ICSR1_RSY       (1 << 0)        /* Recevier synchronized flag */
+
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR            __REG(0x40900000)  /* RTC Count Register */
+#define RTAR            __REG(0x40900004)  /* RTC Alarm Register */
+#define RTSR            __REG(0x40900008)  /* RTC Status Register */
+#define RTTR            __REG(0x4090000C)  /* RTC Timer Trim Register */
+#define PIAR            __REG(0x40900038)  /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE       (1 << 15)       /* Periodic interrupt count enable */
+#define RTSR_PIALE      (1 << 14)       /* Periodic interrupt Alarm enable */
+#define RTSR_HZE        (1 << 3)        /* HZ interrupt enable */
+#define RTSR_ALE        (1 << 2)        /* RTC alarm interrupt enable */
+#define RTSR_HZ         (1 << 1)        /* HZ rising-edge detected */
+#define RTSR_AL         (1 << 0)        /* RTC alarm detected */
+
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0           __REG(0x40A00000)  /* */
+#define OSMR1           __REG(0x40A00004)  /* */
+#define OSMR2           __REG(0x40A00008)  /* */
+#define OSMR3           __REG(0x40A0000C)  /* */
+#define OSMR4           __REG(0x40A00080)  /* */
+#define OSCR            __REG(0x40A00010)  /* OS Timer Counter Register */
+#define OSCR4           __REG(0x40A00040)  /* OS Timer Counter Register */
+#define OMCR4           __REG(0x40A000C0)  /* */
+#define OSSR            __REG(0x40A00014)  /* OS Timer Status Register */
+#define OWER            __REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
+#define OIER            __REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3         (1 << 3)        /* Match status channel 3 */
+#define OSSR_M2         (1 << 2)        /* Match status channel 2 */
+#define OSSR_M1         (1 << 1)        /* Match status channel 1 */
+#define OSSR_M0         (1 << 0)        /* Match status channel 0 */
+
+#define OWER_WME        (1 << 0)        /* Watchdog Match Enable */
+
+#define OIER_E3         (1 << 3)        /* Interrupt enable channel 3 */
+#define OIER_E2         (1 << 2)        /* Interrupt enable channel 2 */
+#define OIER_E1         (1 << 1)        /* Interrupt enable channel 1 */
+#define OIER_E0         (1 << 0)        /* Interrupt enable channel 0 */
+
+
+/*
+ * Pulse Width Modulator
+ */
+
+#define PWM_CTRL0       __REG(0x40B00000)  /* PWM 0 Control Register */
+#define PWM_PWDUTY0     __REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
+#define PWM_PERVAL0     __REG(0x40B00008)  /* PWM 0 Period Control Register */
+
+#define PWM_CTRL1       __REG(0x40C00000)  /* PWM 1Control Register */
+#define PWM_PWDUTY1     __REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
+#define PWM_PERVAL1     __REG(0x40C00008)  /* PWM 1 Period Control Register */
+
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP            __REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
+#define ICMR            __REG(0x40D00004)  /* Interrupt Controller Mask Register */
+#define ICLR            __REG(0x40D00008)  /* Interrupt Controller Level Register */
+#define ICFP            __REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
+#define ICPR            __REG(0x40D00010)  /* Interrupt Controller Pending Register */
+#define ICCR            __REG(0x40D00014)  /* Interrupt Controller Control Register */
+
+#define ICIP2           __REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2           __REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
+#define ICLR2           __REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
+#define ICFP2           __REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2           __REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
+
+/*
+ * General Purpose I/O
+ */
+
+#define GPIO0_BASE      ((void __iomem *)io_p2v(0x40E00000))
+#define GPIO1_BASE      ((void __iomem *)io_p2v(0x40E00004))
+#define GPIO2_BASE      ((void __iomem *)io_p2v(0x40E00008))
+#define GPIO3_BASE      ((void __iomem *)io_p2v(0x40E00100))
+
+#define GPLR_OFFSET     0x00
+#define GPDR_OFFSET     0x0C
+#define GPSR_OFFSET     0x18
+#define GPCR_OFFSET     0x24
+#define GRER_OFFSET     0x30
+#define GFER_OFFSET     0x3C
+#define GEDR_OFFSET     0x48
+
+#define GPLR0           __REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
+#define GPLR1           __REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
+#define GPLR2           __REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
+
+#define GPDR0           __REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
+#define GPDR1           __REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
+#define GPDR2           __REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
+
+#define GPSR0           __REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
+#define GPSR1           __REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
+#define GPSR2           __REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
+
+#define GPCR0           __REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
+#define GPCR1           __REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
+#define GPCR2           __REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
+
+#define GRER0           __REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
+#define GRER1           __REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
+#define GRER2           __REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
+
+#define GFER0           __REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
+#define GFER1           __REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
+#define GFER2           __REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
+
+#define GEDR0           __REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
+#define GEDR1           __REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
+#define GEDR2           __REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
+
+#define GAFR0_L         __REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
+#define GAFR0_U         __REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
+#define GAFR1_L         __REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
+#define GAFR1_U         __REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
+#define GAFR2_L         __REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
+#define GAFR2_U         __REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO<95-80> */
+#define GAFR3_L         __REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
+#define GAFR3_U         __REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
+
+#define GPLR3           __REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
+#define GPDR3           __REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
+#define GPSR3           __REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
+#define GPCR3           __REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
+#define GRER3           __REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
+#define GFER3           __REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
+#define GEDR3           __REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
+
+/* More handy macros.  The argument is a literal GPIO number. */
+
+#define GPIO_bit(x)     (1 << ((x) & 0x1f))
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+
+/* Interrupt Controller */
+
+#define _GPLR(x)        __REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define _GPDR(x)        __REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define _GPSR(x)        __REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define _GPCR(x)        __REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define _GRER(x)        __REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define _GFER(x)        __REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define _GEDR(x)        __REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define _GAFR(x)        __REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#define GPLR(x)         (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
+#define GPDR(x)         (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
+#define GPSR(x)         (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
+#define GPCR(x)         (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
+#define GRER(x)         (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
+#define GFER(x)         (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
+#define GEDR(x)         (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
+#define GAFR(x)         (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
+                         ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
+#else
+
+#define GPLR(x)         __REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define GPDR(x)         __REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define GPSR(x)         __REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define GPCR(x)         __REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define GRER(x)         __REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define GFER(x)         __REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define GEDR(x)         __REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define GAFR(x)         __REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#endif
+
+/*
+ * Power Manager - see pxa2xx-regs.h
+ */
+
+/*
+ * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
+ */
+
+/*
+ * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
+ */
+
+/*
+ * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ */
+
+#ifdef CONFIG_PXA27x
+
+/* Camera Interface */
+#define CICR0           __REG(0x50000000)
+#define CICR1           __REG(0x50000004)
+#define CICR2           __REG(0x50000008)
+#define CICR3           __REG(0x5000000C)
+#define CICR4           __REG(0x50000010)
+#define CISR            __REG(0x50000014)
+#define CIFR            __REG(0x50000018)
+#define CITOR           __REG(0x5000001C)
+#define CIBR0           __REG(0x50000028)
+#define CIBR1           __REG(0x50000030)
+#define CIBR2           __REG(0x50000038)
+
+#define CICR0_DMAEN     (1 << 31)       /* DMA request enable */
+#define CICR0_PAR_EN    (1 << 30)       /* Parity enable */
+#define CICR0_SL_CAP_EN (1 << 29)       /* Capture enable for slave mode */
+#define CICR0_ENB       (1 << 28)       /* Camera interface enable */
+#define CICR0_DIS       (1 << 27)       /* Camera interface disable */
+#define CICR0_SIM       (0x7 << 24)     /* Sensor interface mode mask */
+#define CICR0_TOM       (1 << 9)        /* Time-out mask */
+#define CICR0_RDAVM     (1 << 8)        /* Receive-data-available mask */
+#define CICR0_FEM       (1 << 7)        /* FIFO-empty mask */
+#define CICR0_EOLM      (1 << 6)        /* End-of-line mask */
+#define CICR0_PERRM     (1 << 5)        /* Parity-error mask */
+#define CICR0_QDM       (1 << 4)        /* Quick-disable mask */
+#define CICR0_CDM       (1 << 3)        /* Disable-done mask */
+#define CICR0_SOFM      (1 << 2)        /* Start-of-frame mask */
+#define CICR0_EOFM      (1 << 1)        /* End-of-frame mask */
+#define CICR0_FOM       (1 << 0)        /* FIFO-overrun mask */
+
+#define CICR1_TBIT      (1 << 31)       /* Transparency bit */
+#define CICR1_RGBT_CONV (0x3 << 29)     /* RGBT conversion mask */
+#define CICR1_PPL       (0x7ff << 15)   /* Pixels per line mask */
+#define CICR1_RGB_CONV  (0x7 << 12)     /* RGB conversion mask */
+#define CICR1_RGB_F     (1 << 11)       /* RGB format */
+#define CICR1_YCBCR_F   (1 << 10)       /* YCbCr format */
+#define CICR1_RGB_BPP   (0x7 << 7)      /* RGB bis per pixel mask */
+#define CICR1_RAW_BPP   (0x3 << 5)      /* Raw bis per pixel mask */
+#define CICR1_COLOR_SP  (0x3 << 3)      /* Color space mask */
+#define CICR1_DW        (0x7 << 0)      /* Data width mask */
+
+#define CICR2_BLW       (0xff << 24)    /* Beginning-of-line pixel clock
+                                           wait count mask */
+#define CICR2_ELW       (0xff << 16)    /* End-of-line pixel clock
+                                           wait count mask */
+#define CICR2_HSW       (0x3f << 10)    /* Horizontal sync pulse width mask */
+#define CICR2_BFPW      (0x3f << 3)     /* Beginning-of-frame pixel clock
+                                           wait count mask */
+#define CICR2_FSW       (0x7 << 0)      /* Frame stabilization
+                                           wait count mask */
+
+#define CICR3_BFW       (0xff << 24)    /* Beginning-of-frame line clock
+                                           wait count mask */
+#define CICR3_EFW       (0xff << 16)    /* End-of-frame line clock
+                                           wait count mask */
+#define CICR3_VSW       (0x3f << 10)    /* Vertical sync pulse width mask */
+#define CICR3_BFPW      (0x3f << 3)     /* Beginning-of-frame pixel clock
+                                           wait count mask */
+#define CICR3_LPF       (0x7ff << 0)    /* Lines per frame mask */
+
+#define CICR4_MCLK_DLY  (0x3 << 24)     /* MCLK Data Capture Delay mask */
+#define CICR4_PCLK_EN   (1 << 23)       /* Pixel clock enable */
+#define CICR4_PCP       (1 << 22)       /* Pixel clock polarity */
+#define CICR4_HSP       (1 << 21)       /* Horizontal sync polarity */
+#define CICR4_VSP       (1 << 20)       /* Vertical sync polarity */
+#define CICR4_MCLK_EN   (1 << 19)       /* MCLK enable */
+#define CICR4_FR_RATE   (0x7 << 8)      /* Frame rate mask */
+#define CICR4_DIV       (0xff << 0)     /* Clock divisor mask */
+
+#define CISR_FTO        (1 << 15)       /* FIFO time-out */
+#define CISR_RDAV_2     (1 << 14)       /* Channel 2 receive data available */
+#define CISR_RDAV_1     (1 << 13)       /* Channel 1 receive data available */
+#define CISR_RDAV_0     (1 << 12)       /* Channel 0 receive data available */
+#define CISR_FEMPTY_2   (1 << 11)       /* Channel 2 FIFO empty */
+#define CISR_FEMPTY_1   (1 << 10)       /* Channel 1 FIFO empty */
+#define CISR_FEMPTY_0   (1 << 9)        /* Channel 0 FIFO empty */
+#define CISR_EOL        (1 << 8)        /* End of line */
+#define CISR_PAR_ERR    (1 << 7)        /* Parity error */
+#define CISR_CQD        (1 << 6)        /* Camera interface quick disable */
+#define CISR_CDD        (1 << 5)        /* Camera interface disable done */
+#define CISR_SOF        (1 << 4)        /* Start of frame */
+#define CISR_EOF        (1 << 3)        /* End of frame */
+#define CISR_IFO_2      (1 << 2)        /* FIFO overrun for Channel 2 */
+#define CISR_IFO_1      (1 << 1)        /* FIFO overrun for Channel 1 */
+#define CISR_IFO_0      (1 << 0)        /* FIFO overrun for Channel 0 */
+
+#define CIFR_FLVL2      (0x7f << 23)    /* FIFO 2 level mask */
+#define CIFR_FLVL1      (0x7f << 16)    /* FIFO 1 level mask */
+#define CIFR_FLVL0      (0xff << 8)     /* FIFO 0 level mask */
+#define CIFR_THL_0      (0x3 << 4)      /* Threshold Level for Channel 0 FIFO */
+#define CIFR_RESET_F    (1 << 3)        /* Reset input FIFOs */
+#define CIFR_FEN2       (1 << 2)        /* FIFO enable for channel 2 */
+#define CIFR_FEN1       (1 << 1)        /* FIFO enable for channel 1 */
+#define CIFR_FEN0       (1 << 0)        /* FIFO enable for channel 0 */
+
+#define SRAM_SIZE               0x40000 /* 4x64K  */
+
+#define SRAM_MEM_PHYS           0x5C000000
+
+#define IMPMCR          __REG(0x58000000) /* IM Power Management Control Reg */
+#define IMPMSR          __REG(0x58000008) /* IM Power Management Status Reg */
+
+#define IMPMCR_PC3              (0x3 << 22) /* Bank 3 Power Control */
+#define IMPMCR_PC3_RUN_MODE     (0x0 << 22) /*   Run mode */
+#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /*   Standby mode */
+#define IMPMCR_PC3_AUTO_MODE    (0x3 << 22) /*   Automatically controlled */
+
+#define IMPMCR_PC2              (0x3 << 20) /* Bank 2 Power Control */
+#define IMPMCR_PC2_RUN_MODE     (0x0 << 20) /*   Run mode */
+#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /*   Standby mode */
+#define IMPMCR_PC2_AUTO_MODE    (0x3 << 20) /*   Automatically controlled */
+
+#define IMPMCR_PC1              (0x3 << 18) /* Bank 1 Power Control */
+#define IMPMCR_PC1_RUN_MODE     (0x0 << 18) /*   Run mode */
+#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /*   Standby mode */
+#define IMPMCR_PC1_AUTO_MODE    (0x3 << 18) /*   Automatically controlled */
+
+#define IMPMCR_PC0              (0x3 << 16) /* Bank 0 Power Control */
+#define IMPMCR_PC0_RUN_MODE     (0x0 << 16) /*   Run mode */
+#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /*   Standby mode */
+#define IMPMCR_PC0_AUTO_MODE    (0x3 << 16) /*   Automatically controlled */
+
+#define IMPMCR_AW3              (1 << 11) /* Bank 3 Automatic Wake-up enable */
+#define IMPMCR_AW2              (1 << 10) /* Bank 2 Automatic Wake-up enable */
+#define IMPMCR_AW1              (1 << 9)  /* Bank 1 Automatic Wake-up enable */
+#define IMPMCR_AW0              (1 << 8)  /* Bank 0 Automatic Wake-up enable */
+
+#define IMPMCR_DST              (0xFF << 0) /* Delay Standby Time, ms */
+
+#define IMPMSR_PS3              (0x3 << 6) /* Bank 3 Power Status: */
+#define IMPMSR_PS3_RUN_MODE     (0x0 << 6) /*    Run mode */
+#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /*    Standby mode */
+
+#define IMPMSR_PS2              (0x3 << 4) /* Bank 2 Power Status: */
+#define IMPMSR_PS2_RUN_MODE     (0x0 << 4) /*    Run mode */
+#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /*    Standby mode */
+
+#define IMPMSR_PS1              (0x3 << 2) /* Bank 1 Power Status: */
+#define IMPMSR_PS1_RUN_MODE     (0x0 << 2) /*    Run mode */
+#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /*    Standby mode */
+
+#define IMPMSR_PS0              (0x3 << 0) /* Bank 0 Power Status: */
+#define IMPMSR_PS0_RUN_MODE     (0x0 << 0) /*    Run mode */
+#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /*    Standby mode */
+
+#endif
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHC_BASE_PHYS   (0x4C000000)
+#define UHCREV          __REG(0x4C000000) /* UHC HCI Spec Revision */
+#define UHCHCON         __REG(0x4C000004) /* UHC Host Control Register */
+#define UHCCOMS         __REG(0x4C000008) /* UHC Command Status Register */
+#define UHCINTS         __REG(0x4C00000C) /* UHC Interrupt Status Register */
+#define UHCINTE         __REG(0x4C000010) /* UHC Interrupt Enable */
+#define UHCINTD         __REG(0x4C000014) /* UHC Interrupt Disable */
+#define UHCHCCA         __REG(0x4C000018) /* UHC Host Controller Comm. Area */
+#define UHCPCED         __REG(0x4C00001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED         __REG(0x4C000020) /* UHC Control Head Endpt Descr */
+#define UHCCCED         __REG(0x4C000024) /* UHC Control Current Endpt Descr */
+#define UHCBHED         __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED         __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD        __REG(0x4C000030) /* UHC Done Head */
+#define UHCFMI          __REG(0x4C000034) /* UHC Frame Interval */
+#define UHCFMR          __REG(0x4C000038) /* UHC Frame Remaining */
+#define UHCFMN          __REG(0x4C00003C) /* UHC Frame Number */
+#define UHCPERS         __REG(0x4C000040) /* UHC Periodic Start */
+#define UHCLS           __REG(0x4C000044) /* UHC Low Speed Threshold */
+
+#define UHCRHDA         __REG(0x4C000048) /* UHC Root Hub Descriptor A */
+#define UHCRHDA_NOCP    (1 << 12)       /* No over current protection */
+
+#define UHCRHDB         __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS          __REG(0x4C000050) /* UHC Root Hub Status */
+#define UHCRHPS1        __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2        __REG(0x4C000058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3        __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
+
+#define UHCSTAT         __REG(0x4C000060) /* UHC Status Register */
+#define UHCSTAT_UPS3    (1 << 16)       /* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI   (1 << 15)       /* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI   (1 << 14)       /* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI    (1 << 13)       /* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2    (1 << 12)       /* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1    (1 << 11)       /* USB Power Sense Port 1 */
+#define UHCSTAT_HTA     (1 << 10)       /* HCI Target Abort */
+#define UHCSTAT_HBA     (1 << 8)        /* HCI Buffer Active */
+#define UHCSTAT_RWUE    (1 << 7)        /* HCI Remote Wake Up Event */
+
+#define UHCHR           __REG(0x4C000064) /* UHC Reset Register */
+#define UHCHR_SSEP3     (1 << 11)       /* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2     (1 << 10)       /* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1     (1 << 9)        /* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL      (1 << 7)        /* Power control polarity low */
+#define UHCHR_PSPL      (1 << 6)        /* Power sense polarity low */
+#define UHCHR_SSE       (1 << 5)        /* Sleep Standby Enable */
+#define UHCHR_UIT       (1 << 4)        /* USB Interrupt Test */
+#define UHCHR_SSDC      (1 << 3)        /* Simulation Scale Down Clock */
+#define UHCHR_CGR       (1 << 2)        /* Clock Generation Reset */
+#define UHCHR_FHR       (1 << 1)        /* Force Host Controller Reset */
+#define UHCHR_FSBIR     (1 << 0)        /* Force System Bus Iface Reset */
+
+#define UHCHIE          __REG(0x4C000068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE   (1 << 14)       /* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE    (1 << 13)       /* Port Resume IntEn */
+#define UHCHIE_UPS2IE   (1 << 12)       /* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE   (1 << 11)       /* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE     (1 << 10)       /* HCI Interface Transfer Abort
+                                           Interrupt Enable*/
+#define UHCHIE_HBAIE    (1 << 8)        /* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE     (1 << 7)        /* Remote Wake-up IntEn */
+
+#define UHCHIT          __REG(0x4C00006C) /* UHC Interrupt Test register */
+
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE            0x1
+#define PWRMODE_STANDBY         0x2
+#define PWRMODE_SLEEP           0x3
+#define PWRMODE_DEEPSLEEP       0x7
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
new file mode 100644
index 000000000000..1b80a4805a60
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
@@ -0,0 +1,163 @@
+#ifndef _ASM_ARCH_PXA25X_UDC_H
+#define _ASM_ARCH_PXA25X_UDC_H
+
+#ifdef _ASM_ARCH_PXA27X_UDC_H
+#error "You can't include both PXA25x and PXA27x UDC support"
+#endif
+
+#define UDC_RES1        __REG(0x40600004)  /* UDC Undocumented - Reserved1 */
+#define UDC_RES2        __REG(0x40600008)  /* UDC Undocumented - Reserved2 */
+#define UDC_RES3        __REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
+
+#define UDCCR           __REG(0x40600000)  /* UDC Control Register */
+#define UDCCR_UDE       (1 << 0)        /* UDC enable */
+#define UDCCR_UDA       (1 << 1)        /* UDC active */
+#define UDCCR_RSM       (1 << 2)        /* Device resume */
+#define UDCCR_RESIR     (1 << 3)        /* Resume interrupt request */
+#define UDCCR_SUSIR     (1 << 4)        /* Suspend interrupt request */
+#define UDCCR_SRM       (1 << 5)        /* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR     (1 << 6)        /* Reset interrupt request */
+#define UDCCR_REM       (1 << 7)        /* Reset interrupt mask */
+
+#define UDCCS0          __REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0_OPR      (1 << 0)        /* OUT packet ready */
+#define UDCCS0_IPR      (1 << 1)        /* IN packet ready */
+#define UDCCS0_FTF      (1 << 2)        /* Flush Tx FIFO */
+#define UDCCS0_DRWF     (1 << 3)        /* Device remote wakeup feature */
+#define UDCCS0_SST      (1 << 4)        /* Sent stall */
+#define UDCCS0_FST      (1 << 5)        /* Force stall */
+#define UDCCS0_RNE      (1 << 6)        /* Receive FIFO no empty */
+#define UDCCS0_SA       (1 << 7)        /* Setup active */
+
+/* Bulk IN - Endpoint 1,6,11 */
+#define UDCCS1          __REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS6          __REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS11         __REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
+
+#define UDCCS_BI_TFS    (1 << 0)        /* Transmit FIFO service */
+#define UDCCS_BI_TPC    (1 << 1)        /* Transmit packet complete */
+#define UDCCS_BI_FTF    (1 << 2)        /* Flush Tx FIFO */
+#define UDCCS_BI_TUR    (1 << 3)        /* Transmit FIFO underrun */
+#define UDCCS_BI_SST    (1 << 4)        /* Sent stall */
+#define UDCCS_BI_FST    (1 << 5)        /* Force stall */
+#define UDCCS_BI_TSP    (1 << 7)        /* Transmit short packet */
+
+/* Bulk OUT - Endpoint 2,7,12 */
+#define UDCCS2          __REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7          __REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS12         __REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
+
+#define UDCCS_BO_RFS    (1 << 0)        /* Receive FIFO service */
+#define UDCCS_BO_RPC    (1 << 1)        /* Receive packet complete */
+#define UDCCS_BO_DME    (1 << 3)        /* DMA enable */
+#define UDCCS_BO_SST    (1 << 4)        /* Sent stall */
+#define UDCCS_BO_FST    (1 << 5)        /* Force stall */
+#define UDCCS_BO_RNE    (1 << 6)        /* Receive FIFO not empty */
+#define UDCCS_BO_RSP    (1 << 7)        /* Receive short packet */
+
+/* Isochronous IN - Endpoint 3,8,13 */
+#define UDCCS3          __REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8          __REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS13         __REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
+
+#define UDCCS_II_TFS    (1 << 0)        /* Transmit FIFO service */
+#define UDCCS_II_TPC    (1 << 1)        /* Transmit packet complete */
+#define UDCCS_II_FTF    (1 << 2)        /* Flush Tx FIFO */
+#define UDCCS_II_TUR    (1 << 3)        /* Transmit FIFO underrun */
+#define UDCCS_II_TSP    (1 << 7)        /* Transmit short packet */
+
+/* Isochronous OUT - Endpoint 4,9,14 */
+#define UDCCS4          __REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9          __REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS14         __REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
+
+#define UDCCS_IO_RFS    (1 << 0)        /* Receive FIFO service */
+#define UDCCS_IO_RPC    (1 << 1)        /* Receive packet complete */
+#define UDCCS_IO_ROF    (1 << 2)        /* Receive overflow */
+#define UDCCS_IO_DME    (1 << 3)        /* DMA enable */
+#define UDCCS_IO_RNE    (1 << 6)        /* Receive FIFO not empty */
+#define UDCCS_IO_RSP    (1 << 7)        /* Receive short packet */
+
+/* Interrupt IN - Endpoint 5,10,15 */
+#define UDCCS5          __REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10         __REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS15         __REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+
+#define UDCCS_INT_TFS   (1 << 0)        /* Transmit FIFO service */
+#define UDCCS_INT_TPC   (1 << 1)        /* Transmit packet complete */
+#define UDCCS_INT_FTF   (1 << 2)        /* Flush Tx FIFO */
+#define UDCCS_INT_TUR   (1 << 3)        /* Transmit FIFO underrun */
+#define UDCCS_INT_SST   (1 << 4)        /* Sent stall */
+#define UDCCS_INT_FST   (1 << 5)        /* Force stall */
+#define UDCCS_INT_TSP   (1 << 7)        /* Transmit short packet */
+
+#define UFNRH           __REG(0x40600060)  /* UDC Frame Number Register High */
+#define UFNRL           __REG(0x40600064)  /* UDC Frame Number Register Low */
+#define UBCR2           __REG(0x40600068)  /* UDC Byte Count Reg 2 */
+#define UBCR4           __REG(0x4060006c)  /* UDC Byte Count Reg 4 */
+#define UBCR7           __REG(0x40600070)  /* UDC Byte Count Reg 7 */
+#define UBCR9           __REG(0x40600074)  /* UDC Byte Count Reg 9 */
+#define UBCR12          __REG(0x40600078)  /* UDC Byte Count Reg 12 */
+#define UBCR14          __REG(0x4060007c)  /* UDC Byte Count Reg 14 */
+#define UDDR0           __REG(0x40600080)  /* UDC Endpoint 0 Data Register */
+#define UDDR1           __REG(0x40600100)  /* UDC Endpoint 1 Data Register */
+#define UDDR2           __REG(0x40600180)  /* UDC Endpoint 2 Data Register */
+#define UDDR3           __REG(0x40600200)  /* UDC Endpoint 3 Data Register */
+#define UDDR4           __REG(0x40600400)  /* UDC Endpoint 4 Data Register */
+#define UDDR5           __REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
+#define UDDR6           __REG(0x40600600)  /* UDC Endpoint 6 Data Register */
+#define UDDR7           __REG(0x40600680)  /* UDC Endpoint 7 Data Register */
+#define UDDR8           __REG(0x40600700)  /* UDC Endpoint 8 Data Register */
+#define UDDR9           __REG(0x40600900)  /* UDC Endpoint 9 Data Register */
+#define UDDR10          __REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
+#define UDDR11          __REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
+#define UDDR12          __REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
+#define UDDR13          __REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
+#define UDDR14          __REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
+#define UDDR15          __REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
+
+#define UICR0           __REG(0x40600050)  /* UDC Interrupt Control Register 0 */
+
+#define UICR0_IM0       (1 << 0)        /* Interrupt mask ep 0 */
+#define UICR0_IM1       (1 << 1)        /* Interrupt mask ep 1 */
+#define UICR0_IM2       (1 << 2)        /* Interrupt mask ep 2 */
+#define UICR0_IM3       (1 << 3)        /* Interrupt mask ep 3 */
+#define UICR0_IM4       (1 << 4)        /* Interrupt mask ep 4 */
+#define UICR0_IM5       (1 << 5)        /* Interrupt mask ep 5 */
+#define UICR0_IM6       (1 << 6)        /* Interrupt mask ep 6 */
+#define UICR0_IM7       (1 << 7)        /* Interrupt mask ep 7 */
+
+#define UICR1           __REG(0x40600054)  /* UDC Interrupt Control Register 1 */
+
+#define UICR1_IM8       (1 << 0)        /* Interrupt mask ep 8 */
+#define UICR1_IM9       (1 << 1)        /* Interrupt mask ep 9 */
+#define UICR1_IM10      (1 << 2)        /* Interrupt mask ep 10 */
+#define UICR1_IM11      (1 << 3)        /* Interrupt mask ep 11 */
+#define UICR1_IM12      (1 << 4)        /* Interrupt mask ep 12 */
+#define UICR1_IM13      (1 << 5)        /* Interrupt mask ep 13 */
+#define UICR1_IM14      (1 << 6)        /* Interrupt mask ep 14 */
+#define UICR1_IM15      (1 << 7)        /* Interrupt mask ep 15 */
+
+#define USIR0           __REG(0x40600058)  /* UDC Status Interrupt Register 0 */
+
+#define USIR0_IR0       (1 << 0)        /* Interrupt request ep 0 */
+#define USIR0_IR1       (1 << 1)        /* Interrupt request ep 1 */
+#define USIR0_IR2       (1 << 2)        /* Interrupt request ep 2 */
+#define USIR0_IR3       (1 << 3)        /* Interrupt request ep 3 */
+#define USIR0_IR4       (1 << 4)        /* Interrupt request ep 4 */
+#define USIR0_IR5       (1 << 5)        /* Interrupt request ep 5 */
+#define USIR0_IR6       (1 << 6)        /* Interrupt request ep 6 */
+#define USIR0_IR7       (1 << 7)        /* Interrupt request ep 7 */
+
+#define USIR1           __REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
+
+#define USIR1_IR8       (1 << 0)        /* Interrupt request ep 8 */
+#define USIR1_IR9       (1 << 1)        /* Interrupt request ep 9 */
+#define USIR1_IR10      (1 << 2)        /* Interrupt request ep 10 */
+#define USIR1_IR11      (1 << 3)        /* Interrupt request ep 11 */
+#define USIR1_IR12      (1 << 4)        /* Interrupt request ep 12 */
+#define USIR1_IR13      (1 << 5)        /* Interrupt request ep 13 */
+#define USIR1_IR14      (1 << 6)        /* Interrupt request ep 14 */
+#define USIR1_IR15      (1 << 7)        /* Interrupt request ep 15 */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
new file mode 100644
index 000000000000..ab1443f8bd89
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_ARCH_PXA27X_UDC_H
+#define _ASM_ARCH_PXA27X_UDC_H
+
+#ifdef _ASM_ARCH_PXA25X_UDC_H
+#error You cannot include both PXA25x and PXA27x UDC support
+#endif
+
+#define UDCCR           __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_OEN       (1 << 31)       /* On-the-Go Enable */
+#define UDCCR_AALTHNP   (1 << 30)       /* A-device Alternate Host Negotiation
+                                           Protocol Port Support */
+#define UDCCR_AHNP      (1 << 29)       /* A-device Host Negotiation Protocol
+                                           Support */
+#define UDCCR_BHNP      (1 << 28)       /* B-device Host Negotiation Protocol
+                                           Enable */
+#define UDCCR_DWRE      (1 << 16)       /* Device Remote Wake-up Enable */
+#define UDCCR_ACN       (0x03 << 11)    /* Active UDC configuration Number */
+#define UDCCR_ACN_S     11
+#define UDCCR_AIN       (0x07 << 8)     /* Active UDC interface Number */
+#define UDCCR_AIN_S     8
+#define UDCCR_AAISN     (0x07 << 5)     /* Active UDC Alternate Interface
+                                           Setting Number */
+#define UDCCR_AAISN_S   5
+#define UDCCR_SMAC      (1 << 4)        /* Switch Endpoint Memory to Active
+                                           Configuration */
+#define UDCCR_EMCE      (1 << 3)        /* Endpoint Memory Configuration
+                                           Error */
+#define UDCCR_UDR       (1 << 2)        /* UDC Resume */
+#define UDCCR_UDA       (1 << 1)        /* UDC Active */
+#define UDCCR_UDE       (1 << 0)        /* UDC Enable */
+
+#define UDCICR0         __REG(0x40600004) /* UDC Interrupt Control Register0 */
+#define UDCICR1         __REG(0x40600008) /* UDC Interrupt Control Register1 */
+#define UDCICR_FIFOERR  (1 << 1)        /* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0)        /* Packet Complete interrupt for EP */
+
+#define UDC_INT_FIFOERROR  (0x2)
+#define UDC_INT_PACKETCMP  (0x1)
+
+#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC    (1 << 31)       /* IntEn - Configuration Change */
+#define UDCICR1_IESOF   (1 << 30)       /* IntEn - Start of Frame */
+#define UDCICR1_IERU    (1 << 29)       /* IntEn - Resume */
+#define UDCICR1_IESU    (1 << 28)       /* IntEn - Suspend */
+#define UDCICR1_IERS    (1 << 27)       /* IntEn - Reset */
+
+#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
+#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC    (1 << 31)       /* IntReq - Configuration Change */
+#define UDCISR1_IRSOF   (1 << 30)       /* IntReq - Start of Frame */
+#define UDCISR1_IRRU    (1 << 29)       /* IntReq - Resume */
+#define UDCISR1_IRSU    (1 << 28)       /* IntReq - Suspend */
+#define UDCISR1_IRRS    (1 << 27)       /* IntReq - Reset */
+
+#define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
+#define UDCOTGICR       __REG(0x40600018) /* UDC On-The-Go interrupt control */
+#define UDCOTGICR_IESF  (1 << 24)       /* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR  (1 << 17)       /* Extra Transciever Interrupt
+                                           Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF  (1 << 16)       /* Extra Transciever Interrupt
+                                           Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9)      /* OTG Vbus Valid 4.0V Rising Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8)      /* OTG Vbus Valid 4.0V Falling Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7)      /* OTG Vbus Valid 4.4V Rising Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6)      /* OTG Vbus Valid 4.4V Falling Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IESVR (1 << 5)        /* OTG Session Valid Rising Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IESVF (1 << 4)        /* OTG Session Valid Falling Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IESDR (1 << 3)        /* OTG A-Device SRP Detect Rising
+                                           Edge Interrupt Enable */
+#define UDCOTGICR_IESDF (1 << 2)        /* OTG A-Device SRP Detect Falling
+                                           Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR (1 << 1)        /* OTG ID Change Rising Edge
+                                           Interrupt Enable */
+#define UDCOTGICR_IEIDF (1 << 0)        /* OTG ID Change Falling Edge
+                                           Interrupt Enable */
+
+#define UP2OCR            __REG(0x40600020)  /* USB Port 2 Output Control register */
+#define UP3OCR            __REG(0x40600024)  /* USB Port 2 Output Control register */
+
+#define UP2OCR_CPVEN    (1 << 0)        /* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE    (1 << 1)        /* Charge Pump Vbus Pulse Enable */
+#define UP2OCR_DPPDE    (1 << 2)        /* Host Port 2 Transceiver D+ Pull Down Enable */
+#define UP2OCR_DMPDE    (1 << 3)        /* Host Port 2 Transceiver D- Pull Down Enable */
+#define UP2OCR_DPPUE    (1 << 4)        /* Host Port 2 Transceiver D+ Pull Up Enable */
+#define UP2OCR_DMPUE    (1 << 5)        /* Host Port 2 Transceiver D- Pull Up Enable */
+#define UP2OCR_DPPUBE   (1 << 6)        /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE   (1 << 7)        /* Host Port 2 Transceiver D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP             (1 << 8)        /* External Transceiver Speed Control */
+#define UP2OCR_EXSUS    (1 << 9)        /* External Transceiver Speed Enable */
+#define UP2OCR_IDON             (1 << 10)       /* OTG ID Read Enable */
+#define UP2OCR_HXS              (1 << 16)       /* Host Port 2 Transceiver Output Select */
+#define UP2OCR_HXOE             (1 << 17)       /* Host Port 2 Transceiver Output Enable */
+#define UP2OCR_SEOS(x)          ((x & 7) << 24) /* Single-Ended Output Select */
+
+#define UDCCSN(x)       __REG2(0x40600100, (x) << 2)
+#define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+#define UDCCSR0_SA      (1 << 7)        /* Setup Active */
+#define UDCCSR0_RNE     (1 << 6)        /* Receive FIFO Not Empty */
+#define UDCCSR0_FST     (1 << 5)        /* Force Stall */
+#define UDCCSR0_SST     (1 << 4)        /* Sent Stall */
+#define UDCCSR0_DME     (1 << 3)        /* DMA Enable */
+#define UDCCSR0_FTF     (1 << 2)        /* Flush Transmit FIFO */
+#define UDCCSR0_IPR     (1 << 1)        /* IN Packet Ready */
+#define UDCCSR0_OPC     (1 << 0)        /* OUT Packet Complete */
+
+#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
+
+#define UDCCSR_DPE      (1 << 9)        /* Data Packet Error */
+#define UDCCSR_FEF      (1 << 8)        /* Flush Endpoint FIFO */
+#define UDCCSR_SP       (1 << 7)        /* Short Packet Control/Status */
+#define UDCCSR_BNE      (1 << 6)        /* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF      (1 << 6)        /* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST      (1 << 5)        /* Force STALL */
+#define UDCCSR_SST      (1 << 4)        /* Sent STALL */
+#define UDCCSR_DME      (1 << 3)        /* DMA Enable */
+#define UDCCSR_TRN      (1 << 2)        /* Tx/Rx NAK */
+#define UDCCSR_PC       (1 << 1)        /* Packet Complete */
+#define UDCCSR_FS       (1 << 0)        /* FIFO needs service */
+
+#define UDCBCN(x)       __REG2(0x40600200, (x)<<2)
+#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
+#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
+#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
+#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
+#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
+#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
+#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
+#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
+#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
+#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
+#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
+#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
+#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
+#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
+#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
+#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
+#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
+#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
+#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
+#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
+#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
+#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
+#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
+#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */
+
+#define UDCDN(x)        __REG2(0x40600300, (x)<<2)
+#define PHYS_UDCDN(x)   (0x40600300 + ((x)<<2))
+#define PUDCDN(x)       (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
+#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
+#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
+#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
+#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
+#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
+#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
+#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
+#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
+#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
+#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
+#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
+#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
+#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
+#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
+#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
+#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
+#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
+#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
+#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
+#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
+#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
+#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
+#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
+#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */
+
+#define UDCCN(x)       __REG2(0x40600400, (x)<<2)
+#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
+#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
+#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
+#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
+#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
+#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
+#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
+#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
+#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
+#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
+#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
+#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
+#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
+#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
+#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
+#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
+#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
+#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
+#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
+#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
+#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
+#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
+#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */
+
+#define UDCCONR_CN      (0x03 << 25)    /* Configuration Number */
+#define UDCCONR_CN_S    (25)
+#define UDCCONR_IN      (0x07 << 22)    /* Interface Number */
+#define UDCCONR_IN_S    (22)
+#define UDCCONR_AISN    (0x07 << 19)    /* Alternate Interface Number */
+#define UDCCONR_AISN_S  (19)
+#define UDCCONR_EN      (0x0f << 15)    /* Endpoint Number */
+#define UDCCONR_EN_S    (15)
+#define UDCCONR_ET      (0x03 << 13)    /* Endpoint Type: */
+#define UDCCONR_ET_S    (13)
+#define UDCCONR_ET_INT  (0x03 << 13)    /*   Interrupt */
+#define UDCCONR_ET_BULK (0x02 << 13)    /*   Bulk */
+#define UDCCONR_ET_ISO  (0x01 << 13)    /*   Isochronous */
+#define UDCCONR_ET_NU   (0x00 << 13)    /*   Not used */
+#define UDCCONR_ED      (1 << 12)       /* Endpoint Direction */
+#define UDCCONR_MPS     (0x3ff << 2)    /* Maximum Packet Size */
+#define UDCCONR_MPS_S   (2)
+#define UDCCONR_DE      (1 << 1)        /* Double Buffering Enable */
+#define UDCCONR_EE      (1 << 0)        /* Endpoint Enable */
+
+
+#define UDC_INT_FIFOERROR  (0x2)
+#define UDC_INT_PACKETCMP  (0x1)
+
+#define UDC_FNR_MASK     (0x7ff)
+
+#define UDCCSR_WR_MASK   (UDCCSR_DME|UDCCSR_FST)
+#define UDC_BCR_MASK    (0x3ff)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
new file mode 100644
index 000000000000..d5a48a96dea7
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
+#define __ASM_ARCH_PXA27x_KEYPAD_H
+
+#include <linux/input.h>
+
+#define MAX_MATRIX_KEY_ROWS     (8)
+#define MAX_MATRIX_KEY_COLS     (8)
+
+/* pxa3xx keypad platform specific parameters
+ *
+ * NOTE:
+ * 1. direct_key_num indicates the number of keys in the direct keypad
+ *    _plus_ the number of rotary-encoder sensor inputs,  this can be
+ *    left as 0 if only rotary encoders are enabled,  the driver will
+ *    automatically calculate this
+ *
+ * 2. direct_key_map is the key code map for the direct keys, if rotary
+ *    encoder(s) are enabled, direct key 0/1(2/3) will be ignored
+ *
+ * 3. rotary can be either interpreted as a relative input event (e.g.
+ *    REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
+ *
+ * 4. matrix key and direct key will use the same debounce_interval by
+ *    default, which should be sufficient in most cases
+ */
+struct pxa27x_keypad_platform_data {
+
+        /* code map for the matrix keys */
+        unsigned int    matrix_key_rows;
+        unsigned int    matrix_key_cols;
+        unsigned int    *matrix_key_map;
+        int             matrix_key_map_size;
+
+        /* direct keys */
+        int             direct_key_num;
+        unsigned int    direct_key_map[8];
+
+        /* rotary encoders 0 */
+        int             enable_rotary0;
+        int             rotary0_rel_code;
+        int             rotary0_up_key;
+        int             rotary0_down_key;
+
+        /* rotary encoders 1 */
+        int             enable_rotary1;
+        int             rotary1_rel_code;
+        int             rotary1_up_key;
+        int             rotary1_down_key;
+
+        /* key debounce interval */
+        unsigned int    debounce_interval;
+};
+
+#define KEY(row, col, val)      (((row) << 28) | ((col) << 24) | (val))
+
+extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
+
+#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
new file mode 100644
index 000000000000..6ef1dd09970b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
@@ -0,0 +1,368 @@
+#ifndef __ASM_ARCH_PXA2XX_GPIO_H
+#define __ASM_ARCH_PXA2XX_GPIO_H
+
+#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
+
+/* GPIO alternate function assignments */
+
+#define GPIO1_RST               1       /* reset */
+#define GPIO6_MMCCLK            6       /* MMC Clock */
+#define GPIO7_48MHz             7       /* 48 MHz clock output */
+#define GPIO8_MMCCS0            8       /* MMC Chip Select 0 */
+#define GPIO9_MMCCS1            9       /* MMC Chip Select 1 */
+#define GPIO10_RTCCLK           10      /* real time clock (1 Hz) */
+#define GPIO11_3_6MHz           11      /* 3.6 MHz oscillator out */
+#define GPIO12_32KHz            12      /* 32 kHz out */
+#define GPIO12_CIF_DD_7         12      /* Camera data pin 7 */
+#define GPIO13_MBGNT            13      /* memory controller grant */
+#define GPIO14_MBREQ            14      /* alternate bus master request */
+#define GPIO15_nCS_1            15      /* chip select 1 */
+#define GPIO16_PWM0             16      /* PWM0 output */
+#define GPIO17_PWM1             17      /* PWM1 output */
+#define GPIO17_CIF_DD_6         17      /* Camera data pin 6 */
+#define GPIO18_RDY              18      /* Ext. Bus Ready */
+#define GPIO19_DREQ1            19      /* External DMA Request */
+#define GPIO20_DREQ0            20      /* External DMA Request */
+#define GPIO23_SCLK             23      /* SSP clock */
+#define GPIO23_CIF_MCLK         23      /* Camera Master Clock */
+#define GPIO24_SFRM             24      /* SSP Frame */
+#define GPIO24_CIF_FV           24      /* Camera frame start signal */
+#define GPIO25_STXD             25      /* SSP transmit */
+#define GPIO25_CIF_LV           25      /* Camera line start signal */
+#define GPIO26_SRXD             26      /* SSP receive */
+#define GPIO26_CIF_PCLK         26      /* Camera Pixel Clock */
+#define GPIO27_SEXTCLK          27      /* SSP ext_clk */
+#define GPIO27_CIF_DD_0         27      /* Camera data pin 0 */
+#define GPIO28_BITCLK           28      /* AC97/I2S bit_clk */
+#define GPIO29_SDATA_IN         29      /* AC97 Sdata_in0 / I2S Sdata_in */
+#define GPIO30_SDATA_OUT        30      /* AC97/I2S Sdata_out */
+#define GPIO31_SYNC             31      /* AC97/I2S sync */
+#define GPIO32_SDATA_IN1        32      /* AC97 Sdata_in1 */
+#define GPIO32_SYSCLK           32      /* I2S System Clock */
+#define GPIO32_MMCCLK           32      /* MMC Clock (PXA270) */
+#define GPIO33_nCS_5            33      /* chip select 5 */
+#define GPIO34_FFRXD            34      /* FFUART receive */
+#define GPIO34_MMCCS0           34      /* MMC Chip Select 0 */
+#define GPIO35_FFCTS            35      /* FFUART Clear to send */
+#define GPIO36_FFDCD            36      /* FFUART Data carrier detect */
+#define GPIO37_FFDSR            37      /* FFUART data set ready */
+#define GPIO38_FFRI             38      /* FFUART Ring Indicator */
+#define GPIO39_MMCCS1           39      /* MMC Chip Select 1 */
+#define GPIO39_FFTXD            39      /* FFUART transmit data */
+#define GPIO40_FFDTR            40      /* FFUART data terminal Ready */
+#define GPIO41_FFRTS            41      /* FFUART request to send */
+#define GPIO42_BTRXD            42      /* BTUART receive data */
+#define GPIO42_HWRXD            42      /* HWUART receive data */
+#define GPIO42_CIF_MCLK         42      /* Camera Master Clock */
+#define GPIO43_BTTXD            43      /* BTUART transmit data */
+#define GPIO43_HWTXD            43      /* HWUART transmit data */
+#define GPIO43_CIF_FV           43      /* Camera frame start signal */
+#define GPIO44_BTCTS            44      /* BTUART clear to send */
+#define GPIO44_HWCTS            44      /* HWUART clear to send */
+#define GPIO44_CIF_LV           44      /* Camera line start signal */
+#define GPIO45_BTRTS            45      /* BTUART request to send */
+#define GPIO45_HWRTS            45      /* HWUART request to send */
+#define GPIO45_AC97_SYSCLK      45      /* AC97 System Clock */
+#define GPIO45_CIF_PCLK         45      /* Camera Pixel Clock */
+#define GPIO46_ICPRXD           46      /* ICP receive data */
+#define GPIO46_STRXD            46      /* STD_UART receive data */
+#define GPIO47_ICPTXD           47      /* ICP transmit data */
+#define GPIO47_STTXD            47      /* STD_UART transmit data */
+#define GPIO47_CIF_DD_0         47      /* Camera data pin 0 */
+#define GPIO48_nPOE             48      /* Output Enable for Card Space */
+#define GPIO48_CIF_DD_5         48      /* Camera data pin 5 */
+#define GPIO49_nPWE             49      /* Write Enable for Card Space */
+#define GPIO50_nPIOR            50      /* I/O Read for Card Space */
+#define GPIO50_CIF_DD_3         50      /* Camera data pin 3 */
+#define GPIO51_nPIOW            51      /* I/O Write for Card Space */
+#define GPIO51_CIF_DD_2         51      /* Camera data pin 2 */
+#define GPIO52_nPCE_1           52      /* Card Enable for Card Space */
+#define GPIO52_CIF_DD_4         52      /* Camera data pin 4 */
+#define GPIO53_nPCE_2           53      /* Card Enable for Card Space */
+#define GPIO53_MMCCLK           53      /* MMC Clock */
+#define GPIO53_CIF_MCLK         53      /* Camera Master Clock */
+#define GPIO54_MMCCLK           54      /* MMC Clock */
+#define GPIO54_pSKTSEL          54      /* Socket Select for Card Space */
+#define GPIO54_nPCE_2           54      /* Card Enable for Card Space (PXA27x) */
+#define GPIO54_CIF_PCLK         54      /* Camera Pixel Clock */
+#define GPIO55_nPREG            55      /* Card Address bit 26 */
+#define GPIO55_CIF_DD_1         55      /* Camera data pin 1 */
+#define GPIO56_nPWAIT           56      /* Wait signal for Card Space */
+#define GPIO57_nIOIS16          57      /* Bus Width select for I/O Card Space */
+#define GPIO58_LDD_0            58      /* LCD data pin 0 */
+#define GPIO59_LDD_1            59      /* LCD data pin 1 */
+#define GPIO60_LDD_2            60      /* LCD data pin 2 */
+#define GPIO61_LDD_3            61      /* LCD data pin 3 */
+#define GPIO62_LDD_4            62      /* LCD data pin 4 */
+#define GPIO63_LDD_5            63      /* LCD data pin 5 */
+#define GPIO64_LDD_6            64      /* LCD data pin 6 */
+#define GPIO65_LDD_7            65      /* LCD data pin 7 */
+#define GPIO66_LDD_8            66      /* LCD data pin 8 */
+#define GPIO66_MBREQ            66      /* alternate bus master req */
+#define GPIO67_LDD_9            67      /* LCD data pin 9 */
+#define GPIO67_MMCCS0           67      /* MMC Chip Select 0 */
+#define GPIO68_LDD_10           68      /* LCD data pin 10 */
+#define GPIO68_MMCCS1           68      /* MMC Chip Select 1 */
+#define GPIO69_LDD_11           69      /* LCD data pin 11 */
+#define GPIO69_MMCCLK           69      /* MMC_CLK */
+#define GPIO70_LDD_12           70      /* LCD data pin 12 */
+#define GPIO70_RTCCLK           70      /* Real Time clock (1 Hz) */
+#define GPIO71_LDD_13           71      /* LCD data pin 13 */
+#define GPIO71_3_6MHz           71      /* 3.6 MHz Oscillator clock */
+#define GPIO72_LDD_14           72      /* LCD data pin 14 */
+#define GPIO72_32kHz            72      /* 32 kHz clock */
+#define GPIO73_LDD_15           73      /* LCD data pin 15 */
+#define GPIO73_MBGNT            73      /* Memory controller grant */
+#define GPIO74_LCD_FCLK         74      /* LCD Frame clock */
+#define GPIO75_LCD_LCLK         75      /* LCD line clock */
+#define GPIO76_LCD_PCLK         76      /* LCD Pixel clock */
+#define GPIO77_LCD_ACBIAS       77      /* LCD AC Bias */
+#define GPIO78_nCS_2            78      /* chip select 2 */
+#define GPIO79_nCS_3            79      /* chip select 3 */
+#define GPIO80_nCS_4            80      /* chip select 4 */
+#define GPIO81_NSCLK            81      /* NSSP clock */
+#define GPIO81_CIF_DD_0         81      /* Camera data pin 0 */
+#define GPIO82_NSFRM            82      /* NSSP Frame */
+#define GPIO82_CIF_DD_5         82      /* Camera data pin 5 */
+#define GPIO83_NSTXD            83      /* NSSP transmit */
+#define GPIO83_CIF_DD_4         83      /* Camera data pin 4 */
+#define GPIO84_NSRXD            84      /* NSSP receive */
+#define GPIO84_CIF_FV           84      /* Camera frame start signal */
+#define GPIO85_nPCE_1           85      /* Card Enable for Card Space (PXA27x) */
+#define GPIO85_CIF_LV           85      /* Camera line start signal */
+#define GPIO90_CIF_DD_4         90      /* Camera data pin 4 */
+#define GPIO91_CIF_DD_5         91      /* Camera data pin 5 */
+#define GPIO92_MMCDAT0          92      /* MMC DAT0 (PXA27x) */
+#define GPIO93_CIF_DD_6         93      /* Camera data pin 6 */
+#define GPIO94_CIF_DD_5         94      /* Camera data pin 5 */
+#define GPIO95_CIF_DD_4         95      /* Camera data pin 4 */
+#define GPIO96_FFRXD            96      /* FFUART recieve */
+#define GPIO98_FFRTS            98      /* FFUART request to send */
+#define GPIO98_CIF_DD_0         98      /* Camera data pin 0 */
+#define GPIO99_FFTXD            99      /* FFUART transmit data */
+#define GPIO100_FFCTS           100     /* FFUART Clear to send */
+#define GPIO102_nPCE_1          102     /* PCMCIA (PXA27x) */
+#define GPIO103_CIF_DD_3        103     /* Camera data pin 3 */
+#define GPIO104_CIF_DD_2        104     /* Camera data pin 2 */
+#define GPIO105_CIF_DD_1        105     /* Camera data pin 1 */
+#define GPIO106_CIF_DD_9        106     /* Camera data pin 9 */
+#define GPIO107_CIF_DD_8        107     /* Camera data pin 8 */
+#define GPIO108_CIF_DD_7        108     /* Camera data pin 7 */
+#define GPIO109_MMCDAT1         109     /* MMC DAT1 (PXA27x) */
+#define GPIO110_MMCDAT2         110     /* MMC DAT2 (PXA27x) */
+#define GPIO110_MMCCS0          110     /* MMC Chip Select 0 (PXA27x) */
+#define GPIO111_MMCDAT3         111     /* MMC DAT3 (PXA27x) */
+#define GPIO111_MMCCS1          111     /* MMC Chip Select 1 (PXA27x) */
+#define GPIO112_MMCCMD          112     /* MMC CMD (PXA27x) */
+#define GPIO113_I2S_SYSCLK      113     /* I2S System Clock (PXA27x) */
+#define GPIO113_AC97_RESET_N    113     /* AC97 NRESET on (PXA27x) */
+#define GPIO114_CIF_DD_1        114     /* Camera data pin 1 */
+#define GPIO115_CIF_DD_3        115     /* Camera data pin 3 */
+#define GPIO116_CIF_DD_2        116     /* Camera data pin 2 */
+
+/* GPIO alternate function mode & direction */
+
+#define GPIO_IN                 0x000
+#define GPIO_OUT                0x080
+#define GPIO_ALT_FN_1_IN        0x100
+#define GPIO_ALT_FN_1_OUT       0x180
+#define GPIO_ALT_FN_2_IN        0x200
+#define GPIO_ALT_FN_2_OUT       0x280
+#define GPIO_ALT_FN_3_IN        0x300
+#define GPIO_ALT_FN_3_OUT       0x380
+#define GPIO_MD_MASK_NR         0x07f
+#define GPIO_MD_MASK_DIR        0x080
+#define GPIO_MD_MASK_FN         0x300
+#define GPIO_DFLT_LOW           0x400
+#define GPIO_DFLT_HIGH          0x800
+
+#define GPIO1_RTS_MD            ( 1 | GPIO_ALT_FN_1_IN)
+#define GPIO6_MMCCLK_MD         ( 6 | GPIO_ALT_FN_1_OUT)
+#define GPIO7_48MHz_MD          ( 7 | GPIO_ALT_FN_1_OUT)
+#define GPIO8_MMCCS0_MD         ( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO9_MMCCS1_MD         ( 9 | GPIO_ALT_FN_1_OUT)
+#define GPIO10_RTCCLK_MD        (10 | GPIO_ALT_FN_1_OUT)
+#define GPIO11_3_6MHz_MD        (11 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_32KHz_MD         (12 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_CIF_DD_7_MD      (12 | GPIO_ALT_FN_2_IN)
+#define GPIO13_MBGNT_MD         (13 | GPIO_ALT_FN_2_OUT)
+#define GPIO14_MBREQ_MD         (14 | GPIO_ALT_FN_1_IN)
+#define GPIO15_nCS_1_MD         (15 | GPIO_ALT_FN_2_OUT)
+#define GPIO16_PWM0_MD          (16 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_PWM1_MD          (17 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_CIF_DD_6_MD      (17 | GPIO_ALT_FN_2_IN)
+#define GPIO18_RDY_MD           (18 | GPIO_ALT_FN_1_IN)
+#define GPIO19_DREQ1_MD         (19 | GPIO_ALT_FN_1_IN)
+#define GPIO20_DREQ0_MD         (20 | GPIO_ALT_FN_1_IN)
+#define GPIO23_CIF_MCLK_MD      (23 | GPIO_ALT_FN_1_OUT)
+#define GPIO23_SCLK_MD          (23 | GPIO_ALT_FN_2_OUT)
+#define GPIO24_CIF_FV_MD        (24 | GPIO_ALT_FN_1_OUT)
+#define GPIO24_SFRM_MD          (24 | GPIO_ALT_FN_2_OUT)
+#define GPIO25_CIF_LV_MD        (25 | GPIO_ALT_FN_1_OUT)
+#define GPIO25_STXD_MD          (25 | GPIO_ALT_FN_2_OUT)
+#define GPIO26_SRXD_MD          (26 | GPIO_ALT_FN_1_IN)
+#define GPIO26_CIF_PCLK_MD      (26 | GPIO_ALT_FN_2_IN)
+#define GPIO27_SEXTCLK_MD       (27 | GPIO_ALT_FN_1_IN)
+#define GPIO27_CIF_DD_0_MD      (27 | GPIO_ALT_FN_3_IN)
+#define GPIO28_BITCLK_AC97_MD   (28 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN)
+#define GPIO28_BITCLK_OUT_I2S_MD        (28 | GPIO_ALT_FN_1_OUT)
+#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
+#define GPIO29_SDATA_IN_I2S_MD  (29 | GPIO_ALT_FN_2_IN)
+#define GPIO30_SDATA_OUT_AC97_MD        (30 | GPIO_ALT_FN_2_OUT)
+#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_I2S_MD      (31 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_AC97_MD     (31 | GPIO_ALT_FN_2_OUT)
+#define GPIO32_SDATA_IN1_AC97_MD        (32 | GPIO_ALT_FN_1_IN)
+#define GPIO32_SYSCLK_I2S_MD    (32 | GPIO_ALT_FN_1_OUT)
+#define GPIO32_MMCCLK_MD        (32 | GPIO_ALT_FN_2_OUT)
+#define GPIO33_nCS_5_MD         (33 | GPIO_ALT_FN_2_OUT)
+#define GPIO34_FFRXD_MD         (34 | GPIO_ALT_FN_1_IN)
+#define GPIO34_MMCCS0_MD        (34 | GPIO_ALT_FN_2_OUT)
+#define GPIO35_FFCTS_MD         (35 | GPIO_ALT_FN_1_IN)
+#define GPIO35_KP_MKOUT6_MD     (35 | GPIO_ALT_FN_2_OUT)
+#define GPIO36_FFDCD_MD         (36 | GPIO_ALT_FN_1_IN)
+#define GPIO37_FFDSR_MD         (37 | GPIO_ALT_FN_1_IN)
+#define GPIO38_FFRI_MD          (38 | GPIO_ALT_FN_1_IN)
+#define GPIO39_MMCCS1_MD        (39 | GPIO_ALT_FN_1_OUT)
+#define GPIO39_FFTXD_MD         (39 | GPIO_ALT_FN_2_OUT)
+#define GPIO40_FFDTR_MD         (40 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_FFRTS_MD         (41 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_KP_MKOUT7_MD     (41 | GPIO_ALT_FN_1_OUT)
+#define GPIO42_BTRXD_MD         (42 | GPIO_ALT_FN_1_IN)
+#define GPIO42_HWRXD_MD         (42 | GPIO_ALT_FN_3_IN)
+#define GPIO42_CIF_MCLK_MD      (42 | GPIO_ALT_FN_3_OUT)
+#define GPIO43_BTTXD_MD         (43 | GPIO_ALT_FN_2_OUT)
+#define GPIO43_HWTXD_MD         (43 | GPIO_ALT_FN_3_OUT)
+#define GPIO43_CIF_FV_MD        (43 | GPIO_ALT_FN_3_OUT)
+#define GPIO44_BTCTS_MD         (44 | GPIO_ALT_FN_1_IN)
+#define GPIO44_HWCTS_MD         (44 | GPIO_ALT_FN_3_IN)
+#define GPIO44_CIF_LV_MD        (44 | GPIO_ALT_FN_3_OUT)
+#define GPIO45_CIF_PCLK_MD      (45 | GPIO_ALT_FN_3_IN)
+#define GPIO45_BTRTS_MD         (45 | GPIO_ALT_FN_2_OUT)
+#define GPIO45_HWRTS_MD         (45 | GPIO_ALT_FN_3_OUT)
+#define GPIO45_SYSCLK_AC97_MD   (45 | GPIO_ALT_FN_1_OUT)
+#define GPIO46_ICPRXD_MD        (46 | GPIO_ALT_FN_1_IN)
+#define GPIO46_STRXD_MD         (46 | GPIO_ALT_FN_2_IN)
+#define GPIO47_CIF_DD_0_MD      (47 | GPIO_ALT_FN_1_IN)
+#define GPIO47_ICPTXD_MD        (47 | GPIO_ALT_FN_2_OUT)
+#define GPIO47_STTXD_MD         (47 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_CIF_DD_5_MD      (48 | GPIO_ALT_FN_1_IN)
+#define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
+#define GPIO48_HWTXD_MD         (48 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_HWRXD_MD         (49 | GPIO_ALT_FN_1_IN)
+#define GPIO49_nPWE_MD          (49 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_CIF_DD_3_MD      (50 | GPIO_ALT_FN_1_IN)
+#define GPIO50_nPIOR_MD         (50 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_HWCTS_MD         (50 | GPIO_ALT_FN_1_IN)
+#define GPIO50_CIF_DD_3_MD      (50 | GPIO_ALT_FN_1_IN)
+#define GPIO51_CIF_DD_2_MD      (51 | GPIO_ALT_FN_1_IN)
+#define GPIO51_nPIOW_MD         (51 | GPIO_ALT_FN_2_OUT)
+#define GPIO51_HWRTS_MD         (51 | GPIO_ALT_FN_1_OUT)
+#define GPIO51_CIF_DD_2_MD      (51 | GPIO_ALT_FN_1_IN)
+#define GPIO52_nPCE_1_MD        (52 | GPIO_ALT_FN_2_OUT)
+#define GPIO52_CIF_DD_4_MD      (52 | GPIO_ALT_FN_1_IN)
+#define GPIO53_nPCE_2_MD        (53 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_MMCCLK_MD        (53 | GPIO_ALT_FN_1_OUT)
+#define GPIO53_CIF_MCLK_MD      (53 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_MMCCLK_MD        (54 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_nPCE_2_MD        (54 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_pSKTSEL_MD       (54 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_CIF_PCLK_MD      (54 | GPIO_ALT_FN_3_IN)
+#define GPIO55_nPREG_MD         (55 | GPIO_ALT_FN_2_OUT)
+#define GPIO55_CIF_DD_1_MD      (55 | GPIO_ALT_FN_1_IN)
+#define GPIO56_nPWAIT_MD        (56 | GPIO_ALT_FN_1_IN)
+#define GPIO57_nIOIS16_MD       (57 | GPIO_ALT_FN_1_IN)
+#define GPIO58_LDD_0_MD         (58 | GPIO_ALT_FN_2_OUT)
+#define GPIO59_LDD_1_MD         (59 | GPIO_ALT_FN_2_OUT)
+#define GPIO60_LDD_2_MD         (60 | GPIO_ALT_FN_2_OUT)
+#define GPIO61_LDD_3_MD         (61 | GPIO_ALT_FN_2_OUT)
+#define GPIO62_LDD_4_MD         (62 | GPIO_ALT_FN_2_OUT)
+#define GPIO63_LDD_5_MD         (63 | GPIO_ALT_FN_2_OUT)
+#define GPIO64_LDD_6_MD         (64 | GPIO_ALT_FN_2_OUT)
+#define GPIO65_LDD_7_MD         (65 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_LDD_8_MD         (66 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_MBREQ_MD         (66 | GPIO_ALT_FN_1_IN)
+#define GPIO67_LDD_9_MD         (67 | GPIO_ALT_FN_2_OUT)
+#define GPIO67_MMCCS0_MD        (67 | GPIO_ALT_FN_1_OUT)
+#define GPIO68_LDD_10_MD        (68 | GPIO_ALT_FN_2_OUT)
+#define GPIO68_MMCCS1_MD        (68 | GPIO_ALT_FN_1_OUT)
+#define GPIO69_LDD_11_MD        (69 | GPIO_ALT_FN_2_OUT)
+#define GPIO69_MMCCLK_MD        (69 | GPIO_ALT_FN_1_OUT)
+#define GPIO70_LDD_12_MD        (70 | GPIO_ALT_FN_2_OUT)
+#define GPIO70_RTCCLK_MD        (70 | GPIO_ALT_FN_1_OUT)
+#define GPIO71_LDD_13_MD        (71 | GPIO_ALT_FN_2_OUT)
+#define GPIO71_3_6MHz_MD        (71 | GPIO_ALT_FN_1_OUT)
+#define GPIO72_LDD_14_MD        (72 | GPIO_ALT_FN_2_OUT)
+#define GPIO72_32kHz_MD         (72 | GPIO_ALT_FN_1_OUT)
+#define GPIO73_LDD_15_MD        (73 | GPIO_ALT_FN_2_OUT)
+#define GPIO73_MBGNT_MD         (73 | GPIO_ALT_FN_1_OUT)
+#define GPIO74_LCD_FCLK_MD      (74 | GPIO_ALT_FN_2_OUT)
+#define GPIO75_LCD_LCLK_MD      (75 | GPIO_ALT_FN_2_OUT)
+#define GPIO76_LCD_PCLK_MD      (76 | GPIO_ALT_FN_2_OUT)
+#define GPIO77_LCD_ACBIAS_MD    (77 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nCS_2_MD         (78 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nPCE_2_MD        (78 | GPIO_ALT_FN_1_OUT)
+#define GPIO79_nCS_3_MD         (79 | GPIO_ALT_FN_2_OUT)
+#define GPIO79_pSKTSEL_MD       (79 | GPIO_ALT_FN_1_OUT)
+#define GPIO80_nCS_4_MD         (80 | GPIO_ALT_FN_2_OUT)
+#define GPIO81_NSSP_CLK_OUT     (81 | GPIO_ALT_FN_1_OUT)
+#define GPIO81_NSSP_CLK_IN      (81 | GPIO_ALT_FN_1_IN)
+#define GPIO81_CIF_DD_0_MD      (81 | GPIO_ALT_FN_2_IN)
+#define GPIO82_NSSP_FRM_OUT     (82 | GPIO_ALT_FN_1_OUT)
+#define GPIO82_NSSP_FRM_IN      (82 | GPIO_ALT_FN_1_IN)
+#define GPIO82_CIF_DD_5_MD      (82 | GPIO_ALT_FN_3_IN)
+#define GPIO83_NSSP_TX          (83 | GPIO_ALT_FN_1_OUT)
+#define GPIO83_NSSP_RX          (83 | GPIO_ALT_FN_2_IN)
+#define GPIO83_CIF_DD_4_MD      (83 | GPIO_ALT_FN_3_IN)
+#define GPIO84_NSSP_TX          (84 | GPIO_ALT_FN_1_OUT)
+#define GPIO84_NSSP_RX          (84 | GPIO_ALT_FN_2_IN)
+#define GPIO84_CIF_FV_MD        (84 | GPIO_ALT_FN_3_IN)
+#define GPIO85_nPCE_1_MD        (85 | GPIO_ALT_FN_1_OUT)
+#define GPIO85_CIF_LV_MD        (85 | GPIO_ALT_FN_3_IN)
+#define GPIO86_nPCE_1_MD        (86 | GPIO_ALT_FN_1_OUT)
+#define GPIO88_USBH1_PWR_MD     (88 | GPIO_ALT_FN_1_IN)
+#define GPIO89_USBH1_PEN_MD     (89 | GPIO_ALT_FN_2_OUT)
+#define GPIO90_CIF_DD_4_MD      (90 | GPIO_ALT_FN_3_IN)
+#define GPIO91_CIF_DD_5_MD      (91 | GPIO_ALT_FN_3_IN)
+#define GPIO92_MMCDAT0_MD       (92 | GPIO_ALT_FN_1_OUT)
+#define GPIO93_CIF_DD_6_MD      (93 | GPIO_ALT_FN_2_IN)
+#define GPIO94_CIF_DD_5_MD      (94 | GPIO_ALT_FN_2_IN)
+#define GPIO95_CIF_DD_4_MD      (95 | GPIO_ALT_FN_2_IN)
+#define GPIO95_KP_MKIN6_MD      (95 | GPIO_ALT_FN_3_IN)
+#define GPIO96_KP_DKIN3_MD      (96 | GPIO_ALT_FN_1_IN)
+#define GPIO96_FFRXD_MD         (96 | GPIO_ALT_FN_3_IN)
+#define GPIO97_KP_MKIN3_MD      (97 | GPIO_ALT_FN_3_IN)
+#define GPIO98_CIF_DD_0_MD      (98 | GPIO_ALT_FN_2_IN)
+#define GPIO98_FFRTS_MD         (98 | GPIO_ALT_FN_3_OUT)
+#define GPIO99_FFTXD_MD         (99 | GPIO_ALT_FN_3_OUT)
+#define GPIO100_KP_MKIN0_MD     (100 | GPIO_ALT_FN_1_IN)
+#define GPIO101_KP_MKIN1_MD     (101 | GPIO_ALT_FN_1_IN)
+#define GPIO102_nPCE_1_MD       (102 | GPIO_ALT_FN_1_OUT)
+#define GPIO102_KP_MKIN2_MD     (102 | GPIO_ALT_FN_1_IN)
+#define GPIO103_CIF_DD_3_MD     (103 | GPIO_ALT_FN_1_IN)
+#define GPIO103_KP_MKOUT0_MD    (103 | GPIO_ALT_FN_2_OUT)
+#define GPIO104_CIF_DD_2_MD     (104 | GPIO_ALT_FN_1_IN)
+#define GPIO104_pSKTSEL_MD      (104 | GPIO_ALT_FN_1_OUT)
+#define GPIO104_KP_MKOUT1_MD    (104 | GPIO_ALT_FN_2_OUT)
+#define GPIO105_CIF_DD_1_MD     (105 | GPIO_ALT_FN_1_IN)
+#define GPIO105_KP_MKOUT2_MD    (105 | GPIO_ALT_FN_2_OUT)
+#define GPIO106_CIF_DD_9_MD     (106 | GPIO_ALT_FN_1_IN)
+#define GPIO106_KP_MKOUT3_MD    (106 | GPIO_ALT_FN_2_OUT)
+#define GPIO107_CIF_DD_8_MD     (107 | GPIO_ALT_FN_1_IN)
+#define GPIO107_KP_MKOUT4_MD    (107 | GPIO_ALT_FN_2_OUT)
+#define GPIO108_CIF_DD_7_MD     (108 | GPIO_ALT_FN_1_IN)
+#define GPIO108_KP_MKOUT5_MD    (108 | GPIO_ALT_FN_2_OUT)
+#define GPIO109_MMCDAT1_MD      (109 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCDAT2_MD      (110 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS0_MD       (110 | GPIO_ALT_FN_1_OUT)
+#define GPIO111_MMCDAT3_MD      (111 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS1_MD       (111 | GPIO_ALT_FN_1_OUT)
+#define GPIO112_MMCCMD_MD       (112 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_I2S_SYSCLK_MD   (113 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT)
+#define GPIO117_I2CSCL_MD       (117 | GPIO_ALT_FN_1_IN)
+#define GPIO118_I2CSDA_MD       (118 | GPIO_ALT_FN_1_IN)
+
+#endif /* __ASM_ARCH_PXA2XX_GPIO_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
new file mode 100644
index 000000000000..806ecfea44bf
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -0,0 +1,246 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ *
+ *  Taken from pxa-regs.h by Russell King
+ *
+ *  Author:     Nicolas Pitre
+ *  Copyright:  MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA2XX_REGS_H
+#define __PXA2XX_REGS_H
+
+/*
+ * Memory controller
+ */
+
+#define MDCNFG          __REG(0x48000000)  /* SDRAM Configuration Register 0 */
+#define MDREFR          __REG(0x48000004)  /* SDRAM Refresh Control Register */
+#define MSC0            __REG(0x48000008)  /* Static Memory Control Register 0 */
+#define MSC1            __REG(0x4800000C)  /* Static Memory Control Register 1 */
+#define MSC2            __REG(0x48000010)  /* Static Memory Control Register 2 */
+#define MECR            __REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR           __REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG          __REG(0x4800001C)  /* Synchronous Static Memory Control Register */
+#define SXMRS           __REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0          __REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1          __REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0          __REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1          __REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0           __REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1           __REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS           __REG(0x48000040)  /* MRS value to be written to SDRAM */
+#define BOOT_DEF        __REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s)        __REG2(0x48000028, (s)<<2 )  /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s)        __REG2(0x48000030, (s)<<2 )  /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s)         __REG2(0x48000038, (s)<<2 )  /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS        (1 << 0)        /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT        (1 << 1)        /* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDREFR_K0DB4    (1 << 29)       /* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE   (1 << 25)       /* SDRAM Free-Running Control */
+#define MDREFR_K1FREE   (1 << 24)       /* SDRAM Free-Running Control */
+#define MDREFR_K0FREE   (1 << 23)       /* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH   (1 << 22)       /* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD      (1 << 20)       /* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2    (1 << 19)       /* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN    (1 << 18)       /* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2    (1 << 17)       /* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN    (1 << 16)       /* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN    (1 << 15)       /* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2    (1 << 14)       /* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN    (1 << 13)       /* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN    (1 << 12)       /* SDCKE0 Level Control/Status */
+
+
+#ifdef CONFIG_PXA27x
+
+#define ARB_CNTRL       __REG(0x48000048)  /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK        (1<<31)    /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK             (1<<30)    /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK         (1<<29)    /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK        (1<<28)    /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK            (1<<27)    /* Be parked with USB when idle */
+#define ARB_LCD_PARK            (1<<26)    /* Be parked with LCD when idle */
+#define ARB_DMA_PARK            (1<<25)    /* Be parked with DMA when idle */
+#define ARB_CORE_PARK           (1<<24)    /* Be parked with core when idle */
+#define ARB_LOCK_FLAG           (1<<23)    /* Only Locking masters gain access to the bus */
+
+#endif
+
+
+/*
+ * Power Manager
+ */
+
+#define PMCR            __REG(0x40F00000)  /* Power Manager Control Register */
+#define PSSR            __REG(0x40F00004)  /* Power Manager Sleep Status Register */
+#define PSPR            __REG(0x40F00008)  /* Power Manager Scratch Pad Register */
+#define PWER            __REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
+#define PRER            __REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER            __REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR            __REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR            __REG(0x40F0001C)  /* Power Manager General Configuration Register */
+#define PGSR0           __REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1           __REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2           __REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3           __REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR            __REG(0x40F00030)  /* Reset Controller Status Register */
+
+#define PSLR            __REG(0x40F00034)       /* Power Manager Sleep Config Register */
+#define PSTR            __REG(0x40F00038)       /* Power Manager Standby Config Register */
+#define PSNR            __REG(0x40F0003C)       /* Power Manager Sense Config Register */
+#define PVCR            __REG(0x40F00040)       /* Power Manager VoltageControl Register */
+#define PKWR            __REG(0x40F00050)       /* Power Manager KB Wake-up Enable Reg */
+#define PKSR            __REG(0x40F00054)       /* Power Manager KB Level-Detect Register */
+#define PCMD(x) __REG2(0x40F00080, (x)<<2)
+#define PCMD0   __REG(0x40F00080 + 0 * 4)
+#define PCMD1   __REG(0x40F00080 + 1 * 4)
+#define PCMD2   __REG(0x40F00080 + 2 * 4)
+#define PCMD3   __REG(0x40F00080 + 3 * 4)
+#define PCMD4   __REG(0x40F00080 + 4 * 4)
+#define PCMD5   __REG(0x40F00080 + 5 * 4)
+#define PCMD6   __REG(0x40F00080 + 6 * 4)
+#define PCMD7   __REG(0x40F00080 + 7 * 4)
+#define PCMD8   __REG(0x40F00080 + 8 * 4)
+#define PCMD9   __REG(0x40F00080 + 9 * 4)
+#define PCMD10  __REG(0x40F00080 + 10 * 4)
+#define PCMD11  __REG(0x40F00080 + 11 * 4)
+#define PCMD12  __REG(0x40F00080 + 12 * 4)
+#define PCMD13  __REG(0x40F00080 + 13 * 4)
+#define PCMD14  __REG(0x40F00080 + 14 * 4)
+#define PCMD15  __REG(0x40F00080 + 15 * 4)
+#define PCMD16  __REG(0x40F00080 + 16 * 4)
+#define PCMD17  __REG(0x40F00080 + 17 * 4)
+#define PCMD18  __REG(0x40F00080 + 18 * 4)
+#define PCMD19  __REG(0x40F00080 + 19 * 4)
+#define PCMD20  __REG(0x40F00080 + 20 * 4)
+#define PCMD21  __REG(0x40F00080 + 21 * 4)
+#define PCMD22  __REG(0x40F00080 + 22 * 4)
+#define PCMD23  __REG(0x40F00080 + 23 * 4)
+#define PCMD24  __REG(0x40F00080 + 24 * 4)
+#define PCMD25  __REG(0x40F00080 + 25 * 4)
+#define PCMD26  __REG(0x40F00080 + 26 * 4)
+#define PCMD27  __REG(0x40F00080 + 27 * 4)
+#define PCMD28  __REG(0x40F00080 + 28 * 4)
+#define PCMD29  __REG(0x40F00080 + 29 * 4)
+#define PCMD30  __REG(0x40F00080 + 30 * 4)
+#define PCMD31  __REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC        (1<<12)
+#define PCMD_DCE        (1<<11)
+#define PCMD_LC (1<<10)
+/* FIXME:  PCMD_SQC need be checked.   */
+#define PCMD_SQC        (3<<8)  /* currently only bit 8 is changeable,
+                                   bit 9 should be 0 all day. */
+#define PVCR_VCSA       (0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN    (0x1 << 6)
+
+#define PSSR_OTGPH      (1 << 6)        /* OTG Peripheral control Hold */
+#define PSSR_RDH        (1 << 5)        /* Read Disable Hold */
+#define PSSR_PH         (1 << 4)        /* Peripheral Control Hold */
+#define PSSR_STS        (1 << 3)        /* Standby Mode Status */
+#define PSSR_VFS        (1 << 2)        /* VDD Fault Status */
+#define PSSR_BFS        (1 << 1)        /* Battery Fault Status */
+#define PSSR_SSS        (1 << 0)        /* Software Sleep Status */
+
+#define PSLR_SL_ROD     (1 << 20)       /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
+#define PCFR_RO         (1 << 15)       /* RDH Override */
+#define PCFR_PO         (1 << 14)       /* PH Override */
+#define PCFR_GPROD      (1 << 12)       /* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN      (1 << 11)       /* Sleep Mode L1 converter Enable */
+#define PCFR_FVC        (1 << 10)       /* Frequency/Voltage Change */
+#define PCFR_DC_EN      (1 << 7)        /* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN     (1 << 6)        /* Enable PI2C controller */
+#define PCFR_GPR_EN     (1 << 4)        /* nRESET_GPIO Pin Enable */
+#define PCFR_DS         (1 << 3)        /* Deep Sleep Mode */
+#define PCFR_FS         (1 << 2)        /* Float Static Chip Selects */
+#define PCFR_FP         (1 << 1)        /* Float PCMCIA controls */
+#define PCFR_OPDE       (1 << 0)        /* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR        (1 << 3)        /* GPIO Reset */
+#define RCSR_SMR        (1 << 2)        /* Sleep Mode */
+#define RCSR_WDR        (1 << 1)        /* Watchdog Reset */
+#define RCSR_HWR        (1 << 0)        /* Hardware Reset */
+
+#define PWER_GPIO(Nb)   (1 << Nb)       /* GPIO [0..15] wake-up enable     */
+#define PWER_GPIO0      PWER_GPIO (0)   /* GPIO  [0] wake-up enable        */
+#define PWER_GPIO1      PWER_GPIO (1)   /* GPIO  [1] wake-up enable        */
+#define PWER_GPIO2      PWER_GPIO (2)   /* GPIO  [2] wake-up enable        */
+#define PWER_GPIO3      PWER_GPIO (3)   /* GPIO  [3] wake-up enable        */
+#define PWER_GPIO4      PWER_GPIO (4)   /* GPIO  [4] wake-up enable        */
+#define PWER_GPIO5      PWER_GPIO (5)   /* GPIO  [5] wake-up enable        */
+#define PWER_GPIO6      PWER_GPIO (6)   /* GPIO  [6] wake-up enable        */
+#define PWER_GPIO7      PWER_GPIO (7)   /* GPIO  [7] wake-up enable        */
+#define PWER_GPIO8      PWER_GPIO (8)   /* GPIO  [8] wake-up enable        */
+#define PWER_GPIO9      PWER_GPIO (9)   /* GPIO  [9] wake-up enable        */
+#define PWER_GPIO10     PWER_GPIO (10)  /* GPIO [10] wake-up enable        */
+#define PWER_GPIO11     PWER_GPIO (11)  /* GPIO [11] wake-up enable        */
+#define PWER_GPIO12     PWER_GPIO (12)  /* GPIO [12] wake-up enable        */
+#define PWER_GPIO13     PWER_GPIO (13)  /* GPIO [13] wake-up enable        */
+#define PWER_GPIO14     PWER_GPIO (14)  /* GPIO [14] wake-up enable        */
+#define PWER_GPIO15     PWER_GPIO (15)  /* GPIO [15] wake-up enable        */
+#define PWER_RTC        0x80000000      /* RTC alarm wake-up enable        */
+
+/*
+ * PXA2xx specific Core clock definitions
+ */
+#define CCCR            __REG(0x41300000)  /* Core Clock Configuration Register */
+#define CCSR            __REG(0x4130000C)  /* Core Clock Status Register */
+#define CKEN            __REG(0x41300004)  /* Clock Enable Register */
+#define OSCC            __REG(0x41300008)  /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK     0x0380  /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK     0x0060  /* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK     0x001f  /* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
+#define CKEN_CAMERA     (24)    /* Camera Interface Clock Enable */
+#define CKEN_SSP1       (23)    /* SSP1 Unit Clock Enable */
+#define CKEN_MEMC       (22)    /* Memory Controller Clock Enable */
+#define CKEN_MEMSTK     (21)    /* Memory Stick Host Controller */
+#define CKEN_IM         (20)    /* Internal Memory Clock Enable */
+#define CKEN_KEYPAD     (19)    /* Keypad Interface Clock Enable */
+#define CKEN_USIM       (18)    /* USIM Unit Clock Enable */
+#define CKEN_MSL        (17)    /* MSL Unit Clock Enable */
+#define CKEN_LCD        (16)    /* LCD Unit Clock Enable */
+#define CKEN_PWRI2C     (15)    /* PWR I2C Unit Clock Enable */
+#define CKEN_I2C        (14)    /* I2C Unit Clock Enable */
+#define CKEN_FICP       (13)    /* FICP Unit Clock Enable */
+#define CKEN_MMC        (12)    /* MMC Unit Clock Enable */
+#define CKEN_USB        (11)    /* USB Unit Clock Enable */
+#define CKEN_ASSP       (10)    /* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST    (10)    /* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER    (9)     /* OS Timer Unit Clock Enable */
+#define CKEN_NSSP       (9)     /* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S        (8)     /* I2S Unit Clock Enable */
+#define CKEN_BTUART     (7)     /* BTUART Unit Clock Enable */
+#define CKEN_FFUART     (6)     /* FFUART Unit Clock Enable */
+#define CKEN_STUART     (5)     /* STUART Unit Clock Enable */
+#define CKEN_HWUART     (4)     /* HWUART Unit Clock Enable */
+#define CKEN_SSP3       (4)     /* SSP3 Unit Clock Enable */
+#define CKEN_SSP        (3)     /* SSP Unit Clock Enable */
+#define CKEN_SSP2       (3)     /* SSP2 Unit Clock Enable */
+#define CKEN_AC97       (2)     /* AC97 Unit Clock Enable */
+#define CKEN_PWM1       (1)     /* PWM1 Clock Enable */
+#define CKEN_PWM0       (0)     /* PWM0 Clock Enable */
+
+#define OSCC_OON        (1 << 1)        /* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK        (1 << 0)        /* 32.768kHz OOK (read-only bit) */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
new file mode 100644
index 000000000000..2206cb61a9f9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef PXA2XX_SPI_H_
+#define PXA2XX_SPI_H_
+
+#define PXA2XX_CS_ASSERT (0x01)
+#define PXA2XX_CS_DEASSERT (0x02)
+
+/* device.platform_data for SSP controller devices */
+struct pxa2xx_spi_master {
+        u32 clock_enable;
+        u16 num_chipselect;
+        u8 enable_dma;
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct pxa2xx_spi_chip {
+        u8 tx_threshold;
+        u8 rx_threshold;
+        u8 dma_burst_size;
+        u32 timeout;
+        u8 enable_loopback;
+        void (*cs_control)(u32 command);
+};
+
+extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
+
+#endif /*PXA2XX_SPI_H_*/
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
new file mode 100644
index 000000000000..39eb68319e28
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -0,0 +1,183 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+ *
+ * PXA3xx specific register definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PXA3XX_REGS_H
+#define __ASM_ARCH_PXA3XX_REGS_H
+
+/*
+ * Oscillator Configuration Register (OSCC)
+ */
+#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
+
+#define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
+
+
+/*
+ * Service Power Management Unit (MPMU)
+ */
+#define PMCR            __REG(0x40F50000)       /* Power Manager Control Register */
+#define PSR             __REG(0x40F50004)       /* Power Manager S2 Status Register */
+#define PSPR            __REG(0x40F50008)       /* Power Manager Scratch Pad Register */
+#define PCFR            __REG(0x40F5000C)       /* Power Manager General Configuration Register */
+#define PWER            __REG(0x40F50010)       /* Power Manager Wake-up Enable Register */
+#define PWSR            __REG(0x40F50014)       /* Power Manager Wake-up Status Register */
+#define PECR            __REG(0x40F50018)       /* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR          __REG(0x40F50080)       /* DC-DC Controller Status Register */
+#define PVCR            __REG(0x40F50100)       /* Power Manager Voltage Change Control Register */
+#define PCMD(x)         __REG(0x40F50110 + ((x) << 2))
+
+/*
+ * Slave Power Managment Unit
+ */
+#define ASCR            __REG(0x40f40000)       /* Application Subsystem Power Status/Configuration */
+#define ARSR            __REG(0x40f40004)       /* Application Subsystem Reset Status */
+#define AD3ER           __REG(0x40f40008)       /* Application Subsystem Wake-Up from D3 Enable */
+#define AD3SR           __REG(0x40f4000c)       /* Application Subsystem Wake-Up from D3 Status */
+#define AD2D0ER         __REG(0x40f40010)       /* Application Subsystem Wake-Up from D2 to D0 Enable */
+#define AD2D0SR         __REG(0x40f40014)       /* Application Subsystem Wake-Up from D2 to D0 Status */
+#define AD2D1ER         __REG(0x40f40018)       /* Application Subsystem Wake-Up from D2 to D1 Enable */
+#define AD2D1SR         __REG(0x40f4001c)       /* Application Subsystem Wake-Up from D2 to D1 Status */
+#define AD1D0ER         __REG(0x40f40020)       /* Application Subsystem Wake-Up from D1 to D0 Enable */
+#define AD1D0SR         __REG(0x40f40024)       /* Application Subsystem Wake-Up from D1 to D0 Status */
+#define AGENP           __REG(0x40f4002c)       /* Application Subsystem General Purpose */
+#define AD3R            __REG(0x40f40030)       /* Application Subsystem D3 Configuration */
+#define AD2R            __REG(0x40f40034)       /* Application Subsystem D2 Configuration */
+#define AD1R            __REG(0x40f40038)       /* Application Subsystem D1 Configuration */
+
+/*
+ * Application Subsystem Configuration bits.
+ */
+#define ASCR_RDH                (1 << 31)
+#define ASCR_D1S                (1 << 2)
+#define ASCR_D2S                (1 << 1)
+#define ASCR_D3S                (1 << 0)
+
+/*
+ * Application Reset Status bits.
+ */
+#define ARSR_GPR                (1 << 3)
+#define ARSR_LPMR               (1 << 2)
+#define ARSR_WDT                (1 << 1)
+#define ARSR_HWR                (1 << 0)
+
+/*
+ * Application Subsystem Wake-Up bits.
+ */
+#define ADXER_WRTC              (1 << 31)       /* RTC */
+#define ADXER_WOST              (1 << 30)       /* OS Timer */
+#define ADXER_WTSI              (1 << 29)       /* Touchscreen */
+#define ADXER_WUSBH             (1 << 28)       /* USB host */
+#define ADXER_WUSB2             (1 << 26)       /* USB client 2.0 */
+#define ADXER_WMSL0             (1 << 24)       /* MSL port 0*/
+#define ADXER_WDMUX3            (1 << 23)       /* USB EDMUX3 */
+#define ADXER_WDMUX2            (1 << 22)       /* USB EDMUX2 */
+#define ADXER_WKP               (1 << 21)       /* Keypad */
+#define ADXER_WUSIM1            (1 << 20)       /* USIM Port 1 */
+#define ADXER_WUSIM0            (1 << 19)       /* USIM Port 0 */
+#define ADXER_WOTG              (1 << 16)       /* USBOTG input */
+#define ADXER_MFP_WFLASH        (1 << 15)       /* MFP: Data flash busy */
+#define ADXER_MFP_GEN12         (1 << 14)       /* MFP: MMC3/GPIO/OST inputs */
+#define ADXER_MFP_WMMC2         (1 << 13)       /* MFP: MMC2 */
+#define ADXER_MFP_WMMC1         (1 << 12)       /* MFP: MMC1 */
+#define ADXER_MFP_WI2C          (1 << 11)       /* MFP: I2C */
+#define ADXER_MFP_WSSP4         (1 << 10)       /* MFP: SSP4 */
+#define ADXER_MFP_WSSP3         (1 << 9)        /* MFP: SSP3 */
+#define ADXER_MFP_WMAXTRIX      (1 << 8)        /* MFP: matrix keypad */
+#define ADXER_MFP_WUART3        (1 << 7)        /* MFP: UART3 */
+#define ADXER_MFP_WUART2        (1 << 6)        /* MFP: UART2 */
+#define ADXER_MFP_WUART1        (1 << 5)        /* MFP: UART1 */
+#define ADXER_MFP_WSSP2         (1 << 4)        /* MFP: SSP2 */
+#define ADXER_MFP_WSSP1         (1 << 3)        /* MFP: SSP1 */
+#define ADXER_MFP_WAC97         (1 << 2)        /* MFP: AC97 */
+#define ADXER_WEXTWAKE1         (1 << 1)        /* External Wake 1 */
+#define ADXER_WEXTWAKE0         (1 << 0)        /* External Wake 0 */
+
+/*
+ * AD3R/AD2R/AD1R bits.  R2-R5 are only defined for PXA320.
+ */
+#define ADXR_L2                 (1 << 8)
+#define ADXR_R5                 (1 << 5)
+#define ADXR_R4                 (1 << 4)
+#define ADXR_R3                 (1 << 3)
+#define ADXR_R2                 (1 << 2)
+#define ADXR_R1                 (1 << 1)
+#define ADXR_R0                 (1 << 0)
+
+/*
+ * Values for PWRMODE CP15 register
+ */
+#define PXA3xx_PM_S3D4C4        0x07    /* aka deep sleep */
+#define PXA3xx_PM_S2D3C4        0x06    /* aka sleep */
+#define PXA3xx_PM_S0D2C2        0x03    /* aka standby */
+#define PXA3xx_PM_S0D1C2        0x02    /* aka LCD refresh */
+#define PXA3xx_PM_S0D0C1        0x01
+
+/*
+ * Application Subsystem Clock
+ */
+#define ACCR            __REG(0x41340000)       /* Application Subsystem Clock Configuration Register */
+#define ACSR            __REG(0x41340004)       /* Application Subsystem Clock Status Register */
+#define AICSR           __REG(0x41340008)       /* Application Subsystem Interrupt Control/Status Register */
+#define CKENA           __REG(0x4134000C)       /* A Clock Enable Register */
+#define CKENB           __REG(0x41340010)       /* B Clock Enable Register */
+#define AC97_DIV        __REG(0x41340014)       /* AC97 clock divisor value register */
+
+/*
+ * Clock Enable Bit
+ */
+#define CKEN_LCD        1       /* < LCD Clock Enable */
+#define CKEN_USBH       2       /* < USB host clock enable */
+#define CKEN_CAMERA     3       /* < Camera interface clock enable */
+#define CKEN_NAND       4       /* < NAND Flash Controller Clock Enable */
+#define CKEN_USB2       6       /* < USB 2.0 client clock enable. */
+#define CKEN_DMC        8       /* < Dynamic Memory Controller clock enable */
+#define CKEN_SMC        9       /* < Static Memory Controller clock enable */
+#define CKEN_ISC        10      /* < Internal SRAM Controller clock enable */
+#define CKEN_BOOT       11      /* < Boot rom clock enable */
+#define CKEN_MMC1       12      /* < MMC1 Clock enable */
+#define CKEN_MMC2       13      /* < MMC2 clock enable */
+#define CKEN_KEYPAD     14      /* < Keypand Controller Clock Enable */
+#define CKEN_CIR        15      /* < Consumer IR Clock Enable */
+#define CKEN_USIM0      17      /* < USIM[0] Clock Enable */
+#define CKEN_USIM1      18      /* < USIM[1] Clock Enable */
+#define CKEN_TPM        19      /* < TPM clock enable */
+#define CKEN_UDC        20      /* < UDC clock enable */
+#define CKEN_BTUART     21      /* < BTUART clock enable */
+#define CKEN_FFUART     22      /* < FFUART clock enable */
+#define CKEN_STUART     23      /* < STUART clock enable */
+#define CKEN_AC97       24      /* < AC97 clock enable */
+#define CKEN_TOUCH      25      /* < Touch screen Interface Clock Enable */
+#define CKEN_SSP1       26      /* < SSP1 clock enable */
+#define CKEN_SSP2       27      /* < SSP2 clock enable */
+#define CKEN_SSP3       28      /* < SSP3 clock enable */
+#define CKEN_SSP4       29      /* < SSP4 clock enable */
+#define CKEN_MSL0       30      /* < MSL0 clock enable */
+#define CKEN_PWM0       32      /* < PWM[0] clock enable */
+#define CKEN_PWM1       33      /* < PWM[1] clock enable */
+#define CKEN_I2C        36      /* < I2C clock enable */
+#define CKEN_INTC       38      /* < Interrupt controller clock enable */
+#define CKEN_GPIO       39      /* < GPIO clock enable */
+#define CKEN_1WIRE      40      /* < 1-wire clock enable */
+#define CKEN_HSIO2      41      /* < HSIO2 clock enable */
+#define CKEN_MINI_IM    48      /* < Mini-IM */
+#define CKEN_MINI_LCD   49      /* < Mini LCD */
+
+#if defined(CONFIG_CPU_PXA310)
+#define CKEN_MMC3       5       /* < MMC3 Clock Enable */
+#define CKEN_MVED       43      /* < MVED clock enable */
+#endif
+
+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
+#define PXA300_CKEN_GRAPHICS    42      /* Graphics controller clock enable */
+#define PXA320_CKEN_GRAPHICS    7       /* Graphics controller clock enable */
+
+#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
new file mode 100644
index 000000000000..eb4b190b6657
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_ARCH_PXA3XX_NAND_H
+#define __ASM_ARCH_PXA3XX_NAND_H
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct pxa3xx_nand_platform_data {
+
+        /* the data flash bus is shared between the Static Memory
+         * Controller and the Data Flash Controller,  the arbiter
+         * controls the ownership of the bus
+         */
+        int     enable_arbiter;
+
+        struct mtd_partition *parts;
+        unsigned int    nr_parts;
+};
+
+extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
+#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
new file mode 100644
index 000000000000..65447549616f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -0,0 +1,151 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxafb.h
+ *
+ *  Support for the xscale frame buffer.
+ *
+ *  Author:     Jean-Frederic Clere
+ *  Created:    Sep 22, 2003
+ *  Copyright:  jfclere@sinix.net
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/fb.h>
+#include <mach/regs-lcd.h>
+
+/*
+ * Supported LCD connections
+ *
+ * bits 0 - 3: for LCD panel type:
+ *
+ *   STN  - for passive matrix
+ *   DSTN - for dual scan passive matrix
+ *   TFT  - for active matrix
+ *
+ * bits 4 - 9 : for bus width
+ * bits 10-17 : for AC Bias Pin Frequency
+ * bit     18 : for output enable polarity
+ * bit     19 : for pixel clock edge
+ */
+#define LCD_CONN_TYPE(_x)       ((_x) & 0x0f)
+#define LCD_CONN_WIDTH(_x)      (((_x) >> 4) & 0x1f)
+
+#define LCD_TYPE_UNKNOWN        0
+#define LCD_TYPE_MONO_STN       1
+#define LCD_TYPE_MONO_DSTN      2
+#define LCD_TYPE_COLOR_STN      3
+#define LCD_TYPE_COLOR_DSTN     4
+#define LCD_TYPE_COLOR_TFT      5
+#define LCD_TYPE_SMART_PANEL    6
+#define LCD_TYPE_MAX            7
+
+#define LCD_MONO_STN_4BPP       ((4  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_STN_8BPP       ((8  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_DSTN_8BPP      ((8  << 4) | LCD_TYPE_MONO_DSTN)
+#define LCD_COLOR_STN_8BPP      ((8  << 4) | LCD_TYPE_COLOR_STN)
+#define LCD_COLOR_DSTN_16BPP    ((16 << 4) | LCD_TYPE_COLOR_DSTN)
+#define LCD_COLOR_TFT_16BPP     ((16 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_18BPP     ((18 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_SMART_PANEL_8BPP    ((8  << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_16BPP   ((16 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_18BPP   ((18 << 4) | LCD_TYPE_SMART_PANEL)
+
+#define LCD_AC_BIAS_FREQ(x)     (((x) & 0xff) << 10)
+#define LCD_BIAS_ACTIVE_HIGH    (0 << 17)
+#define LCD_BIAS_ACTIVE_LOW     (1 << 17)
+#define LCD_PCLK_EDGE_RISE      (0 << 18)
+#define LCD_PCLK_EDGE_FALL      (1 << 18)
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
+ * of linux/drivers/video/pxafb.c
+ */
+struct pxafb_mode_info {
+        u_long          pixclock;
+
+        u_short         xres;
+        u_short         yres;
+
+        u_char          bpp;
+        u_int           cmap_greyscale:1,
+                        depth:8,
+                        unused:23;
+
+        /* Parallel Mode Timing */
+        u_char          hsync_len;
+        u_char          left_margin;
+        u_char          right_margin;
+
+        u_char          vsync_len;
+        u_char          upper_margin;
+        u_char          lower_margin;
+        u_char          sync;
+
+        /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
+         * Note:
+         * 1. all parameters in nanosecond (ns)
+         * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
+         *    in pxa27x and pxa3xx, initialize them to the same value or
+         *    the larger one will be used
+         * 3. same to {rd,wr}_pulse_width
+         */
+        unsigned        a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
+        unsigned        a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
+        unsigned        wr_pulse_width; /* L_PCLK_WR pulse width */
+        unsigned        rd_pulse_width; /* L_FCLK_RD pulse width */
+        unsigned        cmd_inh_time;   /* Command Inhibit time between two writes */
+        unsigned        op_hold_time;   /* Output Hold time from L_FCLK_RD negation */
+};
+
+struct pxafb_mach_info {
+        struct pxafb_mode_info *modes;
+        unsigned int num_modes;
+
+        unsigned int    lcd_conn;
+
+        u_int           fixed_modes:1,
+                        cmap_inverse:1,
+                        cmap_static:1,
+                        unused:29;
+
+        /* The following should be defined in LCCR0
+         *      LCCR0_Act or LCCR0_Pas          Active or Passive
+         *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
+         *      LCCR0_Mono or LCCR0_Color       Mono/Color
+         *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
+         *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
+         *
+         * The following should not be defined in LCCR0:
+         *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
+         *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
+         */
+        u_int           lccr0;
+        /* The following should be defined in LCCR3
+         *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
+         *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
+         *      LCCR3_Acb(X)                    AB Bias pin frequency
+         *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
+         *
+         * The following should not be defined in LCCR3
+         *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
+         */
+        u_int           lccr3;
+        /* The following should be defined in LCCR4
+         *      LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
+         *
+         * All other bits in LCCR4 should be left alone.
+         */
+        u_int           lccr4;
+        void (*pxafb_backlight_power)(int);
+        void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
+        void (*smart_update)(struct fb_info *);
+};
+void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
+void set_pxa_fb_parent(struct device *parent_dev);
+unsigned long pxafb_get_hsync_time(struct device *dev);
+
+extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
+extern int pxafb_smart_flush(struct fb_info *info);
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
new file mode 100644
index 000000000000..c689c4ea769c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -0,0 +1,180 @@
+#ifndef __ASM_ARCH_REGS_LCD_H
+#define __ASM_ARCH_REGS_LCD_H
+
+#include <mach/bitfield.h>
+
+/*
+ * LCD Controller Registers and Bits Definitions
+ */
+#define LCCR0           (0x000) /* LCD Controller Control Register 0 */
+#define LCCR1           (0x004) /* LCD Controller Control Register 1 */
+#define LCCR2           (0x008) /* LCD Controller Control Register 2 */
+#define LCCR3           (0x00C) /* LCD Controller Control Register 3 */
+#define LCCR4           (0x010) /* LCD Controller Control Register 4 */
+#define LCCR5           (0x014) /* LCD Controller Control Register 5 */
+#define DFBR0           (0x020) /* DMA Channel 0 Frame Branch Register */
+#define DFBR1           (0x024) /* DMA Channel 1 Frame Branch Register */
+#define LCSR            (0x038) /* LCD Controller Status Register */
+#define LIIDR           (0x03C) /* LCD Controller Interrupt ID Register */
+#define TMEDRGBR        (0x040) /* TMED RGB Seed Register */
+#define TMEDCR          (0x044) /* TMED Control Register */
+
+#define CMDCR           (0x100) /* Command Control Register */
+#define PRSR            (0x104) /* Panel Read Status Register */
+
+#define LCCR3_1BPP      (0 << 24)
+#define LCCR3_2BPP      (1 << 24)
+#define LCCR3_4BPP      (2 << 24)
+#define LCCR3_8BPP      (3 << 24)
+#define LCCR3_16BPP     (4 << 24)
+#define LCCR3_18BPP     (5 << 24)
+#define LCCR3_18BPP_P   (6 << 24)
+#define LCCR3_19BPP     (7 << 24)
+#define LCCR3_19BPP_P   (1 << 29)
+#define LCCR3_24BPP     ((1 << 29) | (1 << 24))
+#define LCCR3_25BPP     ((1 << 29) | (2 << 24))
+
+#define LCCR3_PDFOR_0   (0 << 30)
+#define LCCR3_PDFOR_1   (1 << 30)
+#define LCCR3_PDFOR_2   (2 << 30)
+#define LCCR3_PDFOR_3   (3 << 30)
+
+#define LCCR4_PAL_FOR_0 (0 << 15)
+#define LCCR4_PAL_FOR_1 (1 << 15)
+#define LCCR4_PAL_FOR_2 (2 << 15)
+#define LCCR4_PAL_FOR_MASK      (3 << 15)
+
+#define FDADR0          (0x200) /* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0          (0x204) /* DMA Channel 0 Frame Source Address Register */
+#define FIDR0           (0x208) /* DMA Channel 0 Frame ID Register */
+#define LDCMD0          (0x20C) /* DMA Channel 0 Command Register */
+#define FDADR1          (0x210) /* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1          (0x214) /* DMA Channel 1 Frame Source Address Register */
+#define FIDR1           (0x218) /* DMA Channel 1 Frame ID Register */
+#define LDCMD1          (0x21C) /* DMA Channel 1 Command Register */
+#define FDADR6          (0x260) /* DMA Channel 6 Frame Descriptor Address Register */
+#define FSADR6          (0x264) /* DMA Channel 6 Frame Source Address Register */
+#define FIDR6           (0x268) /* DMA Channel 6 Frame ID Register */
+
+#define LCCR0_ENB       (1 << 0)        /* LCD Controller enable */
+#define LCCR0_CMS       (1 << 1)        /* Color/Monochrome Display Select */
+#define LCCR0_Color     (LCCR0_CMS*0)   /*  Color display */
+#define LCCR0_Mono      (LCCR0_CMS*1)   /*  Monochrome display */
+#define LCCR0_SDS       (1 << 2)        /* Single/Dual Panel Display Select */
+#define LCCR0_Sngl      (LCCR0_SDS*0)   /*  Single panel display */
+#define LCCR0_Dual      (LCCR0_SDS*1)   /*  Dual panel display */
+
+#define LCCR0_LDM       (1 << 3)        /* LCD Disable Done Mask */
+#define LCCR0_SFM       (1 << 4)        /* Start of frame mask */
+#define LCCR0_IUM       (1 << 5)        /* Input FIFO underrun mask */
+#define LCCR0_EFM       (1 << 6)        /* End of Frame mask */
+#define LCCR0_PAS       (1 << 7)        /* Passive/Active display Select */
+#define LCCR0_Pas       (LCCR0_PAS*0)   /*  Passive display (STN) */
+#define LCCR0_Act       (LCCR0_PAS*1)   /*  Active display (TFT) */
+#define LCCR0_DPD       (1 << 9)        /* Double Pixel Data (monochrome) */
+#define LCCR0_4PixMono  (LCCR0_DPD*0)   /*  4-Pixel/clock Monochrome display */
+#define LCCR0_8PixMono  (LCCR0_DPD*1)   /*  8-Pixel/clock Monochrome display */
+#define LCCR0_DIS       (1 << 10)       /* LCD Disable */
+#define LCCR0_QDM       (1 << 11)       /* LCD Quick Disable mask */
+#define LCCR0_PDD       (0xff << 12)    /* Palette DMA request delay */
+#define LCCR0_PDD_S     12
+#define LCCR0_BM        (1 << 20)       /* Branch mask */
+#define LCCR0_OUM       (1 << 21)       /* Output FIFO underrun mask */
+#define LCCR0_LCDT      (1 << 22)       /* LCD panel type */
+#define LCCR0_RDSTM     (1 << 23)       /* Read status interrupt mask */
+#define LCCR0_CMDIM     (1 << 24)       /* Command interrupt mask */
+#define LCCR0_OUC       (1 << 25)       /* Overlay Underlay control bit */
+#define LCCR0_LDDALT    (1 << 26)       /* LDD alternate mapping control */
+
+#define LCCR1_PPL       Fld (10, 0)     /* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel)    (((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW       Fld (6, 10)     /* Horizontal Synchronization */
+#define LCCR1_HorSnchWdth(Tpix) (((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW       Fld (8, 16)     /* End-of-Line pixel clock Wait - 1 */
+#define LCCR1_EndLnDel(Tpix)    (((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW       Fld (8, 24)     /* Beginning-of-Line pixel clock */
+#define LCCR1_BegLnDel(Tpix)    (((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP       Fld (10, 0)     /* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line)     (((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW       Fld (6, 10)     /* Vertical Synchronization pulse - 1 */
+#define LCCR2_VrtSnchWdth(Tln)  (((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW       Fld (8, 16)     /* End-of-Frame line clock Wait */
+#define LCCR2_EndFrmDel(Tln)    ((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW       Fld (8, 24)     /* Beginning-of-Frame line clock */
+#define LCCR2_BegFrmDel(Tln)    ((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_API       (0xf << 16)     /* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S     16
+#define LCCR3_VSP       (1 << 20)       /* vertical sync polarity */
+#define LCCR3_HSP       (1 << 21)       /* horizontal sync polarity */
+#define LCCR3_PCP       (1 << 22)       /* Pixel Clock Polarity (L_PCLK) */
+#define LCCR3_PixRsEdg  (LCCR3_PCP*0)   /*  Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg  (LCCR3_PCP*1)   /*  Pixel clock Falling-Edge */
+
+#define LCCR3_OEP       (1 << 23)       /* Output Enable Polarity */
+#define LCCR3_OutEnH    (LCCR3_OEP*0)   /*  Output Enable active High */
+#define LCCR3_OutEnL    (LCCR3_OEP*1)   /*  Output Enable active Low */
+
+#define LCCR3_DPC       (1 << 27)       /* double pixel clock mode */
+#define LCCR3_PCD       Fld (8, 0)      /* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div)    (((Div) << FShft (LCCR3_PCD)))
+
+#define LCCR3_BPP       Fld (3, 24)     /* Bit Per Pixel */
+#define LCCR3_Bpp(Bpp)  (((Bpp) << FShft (LCCR3_BPP)))
+
+#define LCCR3_ACB       Fld (8, 8)      /* AC Bias */
+#define LCCR3_Acb(Acb)  (((Acb) << FShft (LCCR3_ACB)))
+
+#define LCCR3_HorSnchH  (LCCR3_HSP*0)   /*  HSP Active High */
+#define LCCR3_HorSnchL  (LCCR3_HSP*1)   /*  HSP Active Low */
+
+#define LCCR3_VrtSnchH  (LCCR3_VSP*0)   /*  VSP Active High */
+#define LCCR3_VrtSnchL  (LCCR3_VSP*1)   /*  VSP Active Low */
+
+#define LCCR5_IUM(x)    (1 << ((x) + 23)) /* input underrun mask */
+#define LCCR5_BSM(x)    (1 << ((x) + 15)) /* branch mask */
+#define LCCR5_EOFM(x)   (1 << ((x) + 7))  /* end of frame mask */
+#define LCCR5_SOFM(x)   (1 << ((x) + 0))  /* start of frame mask */
+
+#define LCSR_LDD        (1 << 0)        /* LCD Disable Done */
+#define LCSR_SOF        (1 << 1)        /* Start of frame */
+#define LCSR_BER        (1 << 2)        /* Bus error */
+#define LCSR_ABC        (1 << 3)        /* AC Bias count */
+#define LCSR_IUL        (1 << 4)        /* input FIFO underrun Lower panel */
+#define LCSR_IUU        (1 << 5)        /* input FIFO underrun Upper panel */
+#define LCSR_OU         (1 << 6)        /* output FIFO underrun */
+#define LCSR_QD         (1 << 7)        /* quick disable */
+#define LCSR_EOF        (1 << 8)        /* end of frame */
+#define LCSR_BS         (1 << 9)        /* branch status */
+#define LCSR_SINT       (1 << 10)       /* subsequent interrupt */
+#define LCSR_RD_ST      (1 << 11)       /* read status */
+#define LCSR_CMD_INT    (1 << 12)       /* command interrupt */
+
+#define LDCMD_PAL       (1 << 26)       /* instructs DMA to load palette buffer */
+
+/* smartpanel related */
+#define PRSR_DATA(x)    ((x) & 0xff)    /* Panel Data */
+#define PRSR_A0         (1 << 8)        /* Read Data Source */
+#define PRSR_ST_OK      (1 << 9)        /* Status OK */
+#define PRSR_CON_NT     (1 << 10)       /* Continue to Next Command */
+
+#define SMART_CMD_A0                     (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG        (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER     ((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND          (0x1 << 9)
+#define SMART_CMD_WRITE_DATA            ((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME           ((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC         (0x3 << 9)
+#define SMART_CMD_NOOP                   (0x4 << 9)
+#define SMART_CMD_INTERRUPT              (0x5 << 9)
+
+#define SMART_CMD(x)    (SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x)    (SMART_CMD_WRITE_DATA | ((x) & 0xff))
+#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
new file mode 100644
index 000000000000..3c04cde2cf1f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h
@@ -0,0 +1,127 @@
+#ifndef __ASM_ARCH_REGS_SSP_H
+#define __ASM_ARCH_REGS_SSP_H
+
+/*
+ * SSP Serial Port Registers
+ * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
+ * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ */
+
+#define SSCR0           (0x00)  /* SSP Control Register 0 */
+#define SSCR1           (0x04)  /* SSP Control Register 1 */
+#define SSSR            (0x08)  /* SSP Status Register */
+#define SSITR           (0x0C)  /* SSP Interrupt Test Register */
+#define SSDR            (0x10)  /* SSP Data Write/Data Read Register */
+
+#define SSTO            (0x28)  /* SSP Time Out Register */
+#define SSPSP           (0x2C)  /* SSP Programmable Serial Protocol */
+#define SSTSA           (0x30)  /* SSP Tx Timeslot Active */
+#define SSRSA           (0x34)  /* SSP Rx Timeslot Active */
+#define SSTSS           (0x38)  /* SSP Timeslot Status */
+#define SSACD           (0x3C)  /* SSP Audio Clock Divider */
+
+#if defined(CONFIG_PXA3xx)
+#define SSACDD          (0x40)  /* SSP Audio Clock Dither Divider */
+#endif
+
+/* Common PXA2xx bits first */
+#define SSCR0_DSS       (0x0000000f)    /* Data Size Select (mask) */
+#define SSCR0_DataSize(x)  ((x) - 1)    /* Data Size Select [4..16] */
+#define SSCR0_FRF       (0x00000030)    /* FRame Format (mask) */
+#define SSCR0_Motorola  (0x0 << 4)      /* Motorola's Serial Peripheral Interface (SPI) */
+#define SSCR0_TI        (0x1 << 4)      /* Texas Instruments' Synchronous Serial Protocol (SSP) */
+#define SSCR0_National  (0x2 << 4)      /* National Microwire */
+#define SSCR0_ECS       (1 << 6)        /* External clock select */
+#define SSCR0_SSE       (1 << 7)        /* Synchronous Serial Port Enable */
+
+#if defined(CONFIG_PXA25x)
+#define SSCR0_SCR       (0x0000ff00)    /* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
+
+#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define SSCR0_SCR       (0x000fff00)    /* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
+#define SSCR0_EDSS      (1 << 20)       /* Extended data size select */
+#define SSCR0_NCS       (1 << 21)       /* Network clock select */
+#define SSCR0_RIM       (1 << 22)       /* Receive FIFO overrrun interrupt mask */
+#define SSCR0_TUM       (1 << 23)       /* Transmit FIFO underrun interrupt mask */
+#define SSCR0_FRDC      (0x07000000)    /* Frame rate divider control (mask) */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)  /* Time slots per frame [1..8] */
+#define SSCR0_ADC       (1 << 30)       /* Audio clock select */
+#define SSCR0_MOD       (1 << 31)       /* Mode (normal or network) */
+#endif
+
+#if defined(CONFIG_PXA3xx)
+#define SSCR0_FPCKE     (1 << 29)       /* FIFO packing enable */
+#endif
+
+#define SSCR1_RIE       (1 << 0)        /* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE       (1 << 1)        /* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM       (1 << 2)        /* Loop-Back Mode */
+#define SSCR1_SPO       (1 << 3)        /* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH       (1 << 4)        /* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS      (1 << 5)        /* Microwire Transmit Data Size */
+#define SSCR1_TFT       (0x000003c0)    /* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT       (0x00003c00)    /* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#define SSSR_TNF        (1 << 2)        /* Transmit FIFO Not Full */
+#define SSSR_RNE        (1 << 3)        /* Receive FIFO Not Empty */
+#define SSSR_BSY        (1 << 4)        /* SSP Busy */
+#define SSSR_TFS        (1 << 5)        /* Transmit FIFO Service Request */
+#define SSSR_RFS        (1 << 6)        /* Receive FIFO Service Request */
+#define SSSR_ROR        (1 << 7)        /* Receive FIFO Overrun */
+
+#define SSCR0_TIM               (1 << 23)       /* Transmit FIFO Under Run Interrupt Mask */
+#define SSCR0_RIM               (1 << 22)       /* Receive FIFO Over Run interrupt Mask */
+#define SSCR0_NCS               (1 << 21)       /* Network Clock Select */
+#define SSCR0_EDSS              (1 << 20)       /* Extended Data Size Select */
+
+/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP             (1 << 4)        /* TI Sync Serial Protocol */
+#define SSCR0_PSP               (3 << 4)        /* PSP - Programmable Serial Protocol */
+#define SSCR1_TTELP             (1 << 31)       /* TXD Tristate Enable Last Phase */
+#define SSCR1_TTE               (1 << 30)       /* TXD Tristate Enable */
+#define SSCR1_EBCEI             (1 << 29)       /* Enable Bit Count Error interrupt */
+#define SSCR1_SCFR              (1 << 28)       /* Slave Clock free Running */
+#define SSCR1_ECRA              (1 << 27)       /* Enable Clock Request A */
+#define SSCR1_ECRB              (1 << 26)       /* Enable Clock request B */
+#define SSCR1_SCLKDIR           (1 << 25)       /* Serial Bit Rate Clock Direction */
+#define SSCR1_SFRMDIR           (1 << 24)       /* Frame Direction */
+#define SSCR1_RWOT              (1 << 23)       /* Receive Without Transmit */
+#define SSCR1_TRAIL             (1 << 22)       /* Trailing Byte */
+#define SSCR1_TSRE              (1 << 21)       /* Transmit Service Request Enable */
+#define SSCR1_RSRE              (1 << 20)       /* Receive Service Request Enable */
+#define SSCR1_TINTE             (1 << 19)       /* Receiver Time-out Interrupt enable */
+#define SSCR1_PINTE             (1 << 18)       /* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_IFS               (1 << 16)       /* Invert Frame Signal */
+#define SSCR1_STRF              (1 << 15)       /* Select FIFO or EFWR */
+#define SSCR1_EFWR              (1 << 14)       /* Enable FIFO Write/Read */
+
+#define SSSR_BCE                (1 << 23)       /* Bit Count Error */
+#define SSSR_CSS                (1 << 22)       /* Clock Synchronisation Status */
+#define SSSR_TUR                (1 << 21)       /* Transmit FIFO Under Run */
+#define SSSR_EOC                (1 << 20)       /* End Of Chain */
+#define SSSR_TINT               (1 << 19)       /* Receiver Time-out Interrupt */
+#define SSSR_PINT               (1 << 18)       /* Peripheral Trailing Byte Interrupt */
+
+#define SSPSP_FSRT              (1 << 25)       /* Frame Sync Relative Timing */
+#define SSPSP_DMYSTOP(x)        ((x) << 23)     /* Dummy Stop */
+#define SSPSP_SFRMWDTH(x)       ((x) << 16)     /* Serial Frame Width */
+#define SSPSP_SFRMDLY(x)        ((x) << 9)      /* Serial Frame Delay */
+#define SSPSP_DMYSTRT(x)        ((x) << 7)      /* Dummy Start */
+#define SSPSP_STRTDLY(x)        ((x) << 4)      /* Start Delay */
+#define SSPSP_ETDS              (1 << 3)        /* End of Transfer data State */
+#define SSPSP_SFRMP             (1 << 2)        /* Serial Frame Polarity */
+#define SSPSP_SCMODE(x)         ((x) << 0)      /* Serial Bit Rate Clock Mode */
+
+#define SSACD_SCDB              (1 << 3)        /* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x)           ((x) << 4)      /* Audio clock PLL select */
+#define SSACD_ACDS(x)           ((x) << 0)      /* Audio clock divider select */
+#if defined(CONFIG_PXA3xx)
+#define SSACD_SCDX8             (1 << 7)        /* SYSCLK division ratio select */
+#endif
+
+
+#endif /* __ASM_ARCH_REGS_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
new file mode 100644
index 000000000000..9489a48871a8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H
+
+#define RESET_STATUS_HARDWARE   (1 << 0)        /* Hardware Reset */
+#define RESET_STATUS_WATCHDOG   (1 << 1)        /* Watchdog Reset */
+#define RESET_STATUS_LOWPOWER   (1 << 2)        /* Low Power/Sleep Exit */
+#define RESET_STATUS_GPIO       (1 << 3)        /* GPIO Reset */
+#define RESET_STATUS_ALL        (0xf)
+
+extern unsigned int reset_status;
+extern void clear_reset_status(unsigned int mask);
+
+/*
+ * register GPIO as reset generator
+ */
+extern int init_gpio_reset(int gpio);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
new file mode 100644
index 000000000000..3b1d4a72d4d1
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/sharpsl.h
@@ -0,0 +1,34 @@
+/*
+ * SharpSL SSP Driver
+ */
+
+unsigned long corgi_ssp_ads7846_putget(unsigned long);
+unsigned long corgi_ssp_ads7846_get(void);
+void corgi_ssp_ads7846_put(unsigned long data);
+void corgi_ssp_ads7846_lock(void);
+void corgi_ssp_ads7846_unlock(void);
+void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
+void corgi_ssp_blduty_set(int duty);
+int corgi_ssp_max1111_get(unsigned long data);
+
+/*
+ * SharpSL Touchscreen Driver
+ */
+
+struct corgits_machinfo {
+        unsigned long (*get_hsync_invperiod)(void);
+        void (*put_hsync)(void);
+        void (*wait_hsync)(void);
+};
+
+
+/*
+ * SharpSL Backlight
+ */
+extern void corgibl_limit_intensity(int limit);
+
+
+/*
+ * SharpSL Battery/PM Driver
+ */
+extern void sharpsl_battery_kick(void);
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
new file mode 100644
index 000000000000..bd14365f7ed5
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -0,0 +1,158 @@
+/*
+ * Hardware specific definitions for SL-Cx000 series of PDAs
+ *
+ * Copyright (c) 2005 Alexander Wykes
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_SPITZ_H
+#define __ASM_ARCH_SPITZ_H  1
+#endif
+
+#include <linux/fb.h>
+
+/* Spitz/Akita GPIOs */
+
+#define SPITZ_GPIO_KEY_INT         (0) /* Key Interrupt */
+#define SPITZ_GPIO_RESET           (1)
+#define SPITZ_GPIO_nSD_DETECT      (9)
+#define SPITZ_GPIO_TP_INT          (11) /* Touch Panel interrupt */
+#define SPITZ_GPIO_AK_INT          (13) /* Remote Control */
+#define SPITZ_GPIO_ADS7846_CS      (14)
+#define SPITZ_GPIO_SYNC            (16)
+#define SPITZ_GPIO_MAX1111_CS      (20)
+#define SPITZ_GPIO_FATAL_BAT       (21)
+#define SPITZ_GPIO_HSYNC           (22)
+#define SPITZ_GPIO_nSD_CLK         (32)
+#define SPITZ_GPIO_USB_DEVICE      (35)
+#define SPITZ_GPIO_USB_HOST        (37)
+#define SPITZ_GPIO_USB_CONNECT     (41)
+#define SPITZ_GPIO_LCDCON_CS       (53)
+#define SPITZ_GPIO_nPCE            (54)
+#define SPITZ_GPIO_nSD_WP          (81)
+#define SPITZ_GPIO_ON_RESET        (89)
+#define SPITZ_GPIO_BAT_COVER       (90)
+#define SPITZ_GPIO_CF_CD           (94)
+#define SPITZ_GPIO_ON_KEY          (95)
+#define SPITZ_GPIO_SWA             (97)
+#define SPITZ_GPIO_SWB             (96)
+#define SPITZ_GPIO_CHRG_FULL       (101)
+#define SPITZ_GPIO_CO              (101)
+#define SPITZ_GPIO_CF_IRQ          (105)
+#define SPITZ_GPIO_AC_IN           (115)
+#define SPITZ_GPIO_HP_IN           (116)
+
+/* Spitz Only GPIOs */
+
+#define SPITZ_GPIO_CF2_IRQ         (106) /* CF slot1 Ready */
+#define SPITZ_GPIO_CF2_CD          (93)
+
+
+/* Spitz/Akita Keyboard Definitions */
+
+#define SPITZ_KEY_STROBE_NUM         (11)
+#define SPITZ_KEY_SENSE_NUM          (7)
+#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
+#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
+#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
+#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
+#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
+#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
+#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
+#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
+
+#define SPITZ_GPIO_KEY_STROBE0       88
+#define SPITZ_GPIO_KEY_STROBE1       23
+#define SPITZ_GPIO_KEY_STROBE2       24
+#define SPITZ_GPIO_KEY_STROBE3       25
+#define SPITZ_GPIO_KEY_STROBE4       26
+#define SPITZ_GPIO_KEY_STROBE5       27
+#define SPITZ_GPIO_KEY_STROBE6       52
+#define SPITZ_GPIO_KEY_STROBE7       103
+#define SPITZ_GPIO_KEY_STROBE8       107
+#define SPITZ_GPIO_KEY_STROBE9       108
+#define SPITZ_GPIO_KEY_STROBE10      114
+
+#define SPITZ_GPIO_KEY_SENSE0        12
+#define SPITZ_GPIO_KEY_SENSE1        17
+#define SPITZ_GPIO_KEY_SENSE2        91
+#define SPITZ_GPIO_KEY_SENSE3        34
+#define SPITZ_GPIO_KEY_SENSE4        36
+#define SPITZ_GPIO_KEY_SENSE5        38
+#define SPITZ_GPIO_KEY_SENSE6        39
+
+
+/* Spitz Scoop Device (No. 1) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP_LED_GREEN     SCOOP_GPCR_PA11  /* Keep */
+#define SPITZ_SCP_JK_B          SCOOP_GPCR_PA12  /* Keep */
+#define SPITZ_SCP_CHRG_ON       SCOOP_GPCR_PA13  /* Keep */
+#define SPITZ_SCP_MUTE_L        SCOOP_GPCR_PA14  /* Low */
+#define SPITZ_SCP_MUTE_R        SCOOP_GPCR_PA15  /* Low */
+#define SPITZ_SCP_CF_POWER      SCOOP_GPCR_PA16  /* Keep */
+#define SPITZ_SCP_LED_ORANGE    SCOOP_GPCR_PA17  /* Keep */
+#define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
+#define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
+
+#define SPITZ_SCP_IO_DIR      (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
+                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
+                               SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
+#define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_SUS_SET     0
+
+/* Spitz Scoop Device (No. 2) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
+#define SPITZ_SCP2_AKIN_PULLUP     SCOOP_GPCR_PA12  /* Keep */
+#define SPITZ_SCP2_RESERVED_1      SCOOP_GPCR_PA13  /* High */
+#define SPITZ_SCP2_RESERVED_2      SCOOP_GPCR_PA14  /* Low */
+#define SPITZ_SCP2_RESERVED_3      SCOOP_GPCR_PA15  /* Low */
+#define SPITZ_SCP2_RESERVED_4      SCOOP_GPCR_PA16  /* Low */
+#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Low */
+#define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
+#define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
+
+#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
+                           SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+                           SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+
+#define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+                             SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+#define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
+
+
+/* Spitz IRQ Definitions */
+
+#define SPITZ_IRQ_GPIO_KEY_INT        IRQ_GPIO(SPITZ_GPIO_KEY_INT)
+#define SPITZ_IRQ_GPIO_AC_IN          IRQ_GPIO(SPITZ_GPIO_AC_IN)
+#define SPITZ_IRQ_GPIO_AK_INT         IRQ_GPIO(SPITZ_GPIO_AK_INT)
+#define SPITZ_IRQ_GPIO_HP_IN          IRQ_GPIO(SPITZ_GPIO_HP_IN)
+#define SPITZ_IRQ_GPIO_TP_INT         IRQ_GPIO(SPITZ_GPIO_TP_INT)
+#define SPITZ_IRQ_GPIO_SYNC           IRQ_GPIO(SPITZ_GPIO_SYNC)
+#define SPITZ_IRQ_GPIO_ON_KEY         IRQ_GPIO(SPITZ_GPIO_ON_KEY)
+#define SPITZ_IRQ_GPIO_SWA            IRQ_GPIO(SPITZ_GPIO_SWA)
+#define SPITZ_IRQ_GPIO_SWB            IRQ_GPIO(SPITZ_GPIO_SWB)
+#define SPITZ_IRQ_GPIO_BAT_COVER      IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
+#define SPITZ_IRQ_GPIO_FATAL_BAT      IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
+#define SPITZ_IRQ_GPIO_CO             IRQ_GPIO(SPITZ_GPIO_CO)
+#define SPITZ_IRQ_GPIO_CF_IRQ         IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
+#define SPITZ_IRQ_GPIO_CF_CD          IRQ_GPIO(SPITZ_GPIO_CF_CD)
+#define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
+#define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
+#define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device spitzscoop_device;
+extern struct platform_device spitzscoop2_device;
+extern struct platform_device spitzssp_device;
+extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
new file mode 100644
index 000000000000..a012882c9ee6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
@@ -0,0 +1,83 @@
+/*
+ *  ssp.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver supports the following PXA CPU/SSP ports:-
+ *
+ *       PXA250     SSP
+ *       PXA255     SSP, NSSP
+ *       PXA26x     SSP, NSSP, ASSP
+ *       PXA27x     SSP1, SSP2, SSP3
+ *       PXA3xx     SSP1, SSP2, SSP3, SSP4
+ */
+
+#ifndef __ASM_ARCH_SSP_H
+#define __ASM_ARCH_SSP_H
+
+#include <linux/list.h>
+
+enum pxa_ssp_type {
+        SSP_UNDEFINED = 0,
+        PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
+        PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
+        PXA27x_SSP,
+};
+
+struct ssp_device {
+        struct platform_device *pdev;
+        struct list_head        node;
+
+        struct clk      *clk;
+        void __iomem    *mmio_base;
+        unsigned long   phys_base;
+
+        const char      *label;
+        int             port_id;
+        int             type;
+        int             use_count;
+        int             irq;
+        int             drcmr_rx;
+        int             drcmr_tx;
+};
+
+/*
+ * SSP initialisation flags
+ */
+#define SSP_NO_IRQ      0x1             /* don't register an irq handler in SSP driver */
+
+struct ssp_state {
+        u32     cr0;
+        u32 cr1;
+        u32 to;
+        u32 psp;
+};
+
+struct ssp_dev {
+        struct ssp_device *ssp;
+        u32 port;
+        u32 mode;
+        u32 flags;
+        u32 psp_flags;
+        u32 speed;
+        int irq;
+};
+
+int ssp_write_word(struct ssp_dev *dev, u32 data);
+int ssp_read_word(struct ssp_dev *dev, u32 *data);
+int ssp_flush(struct ssp_dev *dev);
+void ssp_enable(struct ssp_dev *dev);
+void ssp_disable(struct ssp_dev *dev);
+void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp);
+void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp);
+int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
+int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
+void ssp_exit(struct ssp_dev *dev);
+
+struct ssp_device *ssp_request(int port, const char *label);
+void ssp_free(struct ssp_device *);
+#endif /* __ASM_ARCH_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
new file mode 100644
index 000000000000..0f381e692999
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pxa/include/mach/system.h
+ *
+ * Author:      Nicolas Pitre
+ * Created:     Jun 15, 2001
+ * Copyright:   MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/proc-fns.h>
+#include "hardware.h"
+#include "pxa2xx-regs.h"
+#include "pxa-regs.h"
+
+static inline void arch_idle(void)
+{
+        cpu_do_idle();
+}
+
+
+void arch_reset(char mode);
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
new file mode 100644
index 000000000000..b05fc6683c47
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-pxa/include/mach/timex.h
+ *
+ * Author:      Nicolas Pitre
+ * Created:     Jun 15, 2001
+ * Copyright:   MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#if defined(CONFIG_PXA25x)
+/* PXA250/210 timer base */
+#define CLOCK_TICK_RATE 3686400
+#elif defined(CONFIG_PXA27x)
+/* PXA27x timer base */
+#ifdef CONFIG_MACH_MAINSTONE
+#define CLOCK_TICK_RATE 3249600
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
new file mode 100644
index 000000000000..a72803f0461b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -0,0 +1,198 @@
+/*
+ * Hardware specific definitions for Sharp SL-C6000x series of PDAs
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef _ASM_ARCH_TOSA_H_
+#define _ASM_ARCH_TOSA_H_ 1
+
+/*  TOSA Chip selects  */
+#define TOSA_LCDC_PHYS          PXA_CS4_PHYS
+/* Internel Scoop */
+#define TOSA_CF_PHYS            (PXA_CS2_PHYS + 0x00800000)
+/* Jacket Scoop */
+#define TOSA_SCOOP_PHYS         (PXA_CS5_PHYS + 0x00800000)
+
+/*
+ * SCOOP2 internal GPIOs
+ */
+#define TOSA_SCOOP_GPIO_BASE            NR_BUILTIN_GPIO
+#define TOSA_SCOOP_PXA_VCORE1           SCOOP_GPCR_PA11
+#define TOSA_GPIO_TC6393XB_REST_IN      (TOSA_SCOOP_GPIO_BASE + 1)
+#define TOSA_GPIO_IR_POWERDWN           (TOSA_SCOOP_GPIO_BASE + 2)
+#define TOSA_GPIO_SD_WP                 (TOSA_SCOOP_GPIO_BASE + 3)
+#define TOSA_GPIO_PWR_ON                (TOSA_SCOOP_GPIO_BASE + 4)
+#define TOSA_SCOOP_AUD_PWR_ON           SCOOP_GPCR_PA16
+#define TOSA_GPIO_BT_RESET              (TOSA_SCOOP_GPIO_BASE + 6)
+#define TOSA_GPIO_BT_PWR_EN             (TOSA_SCOOP_GPIO_BASE + 7)
+#define TOSA_SCOOP_AC_IN_OL             SCOOP_GPCR_PA19
+
+/* GPIO Direction   1 : output mode / 0:input mode */
+#define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
+                TOSA_SCOOP_AUD_PWR_ON)
+
+/*
+ * SCOOP2 jacket GPIOs
+ */
+#define TOSA_SCOOP_JC_GPIO_BASE         (NR_BUILTIN_GPIO + 12)
+#define TOSA_GPIO_BT_LED                (TOSA_SCOOP_JC_GPIO_BASE + 0)
+#define TOSA_GPIO_NOTE_LED              (TOSA_SCOOP_JC_GPIO_BASE + 1)
+#define TOSA_GPIO_CHRG_ERR_LED          (TOSA_SCOOP_JC_GPIO_BASE + 2)
+#define TOSA_GPIO_USB_PULLUP            (TOSA_SCOOP_JC_GPIO_BASE + 3)
+#define TOSA_GPIO_TC6393XB_SUSPEND      (TOSA_SCOOP_JC_GPIO_BASE + 4)
+#define TOSA_GPIO_TC6393XB_L3V_ON       (TOSA_SCOOP_JC_GPIO_BASE + 5)
+#define TOSA_SCOOP_JC_WLAN_DETECT       SCOOP_GPCR_PA17
+#define TOSA_GPIO_WLAN_LED              (TOSA_SCOOP_JC_GPIO_BASE + 7)
+#define TOSA_SCOOP_JC_CARD_LIMIT_SEL    SCOOP_GPCR_PA19
+
+/* GPIO Direction   1 : output mode / 0:input mode */
+#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
+
+/*
+ * TC6393XB GPIOs
+ */
+#define TOSA_TC6393XB_GPIO_BASE         (NR_BUILTIN_GPIO + 2 * 12)
+#define TOSA_TC6393XB_GPIO(i)           (TOSA_TC6393XB_GPIO_BASE + (i))
+#define TOSA_TC6393XB_GPIO_BIT(gpio)    (1 << (gpio - TOSA_TC6393XB_GPIO_BASE))
+
+#define TOSA_GPIO_TG_ON                 (TOSA_TC6393XB_GPIO_BASE + 0)
+#define TOSA_GPIO_L_MUTE                (TOSA_TC6393XB_GPIO_BASE + 1)
+#define TOSA_GPIO_BL_C20MA              (TOSA_TC6393XB_GPIO_BASE + 3)
+#define TOSA_GPIO_CARD_VCC_ON           (TOSA_TC6393XB_GPIO_BASE + 4)
+#define TOSA_GPIO_CHARGE_OFF            (TOSA_TC6393XB_GPIO_BASE + 6)
+#define TOSA_GPIO_CHARGE_OFF_JC         (TOSA_TC6393XB_GPIO_BASE + 7)
+#define TOSA_GPIO_BAT0_V_ON             (TOSA_TC6393XB_GPIO_BASE + 9)
+#define TOSA_GPIO_BAT1_V_ON             (TOSA_TC6393XB_GPIO_BASE + 10)
+#define TOSA_GPIO_BU_CHRG_ON            (TOSA_TC6393XB_GPIO_BASE + 11)
+#define TOSA_GPIO_BAT_SW_ON             (TOSA_TC6393XB_GPIO_BASE + 12)
+#define TOSA_GPIO_BAT0_TH_ON            (TOSA_TC6393XB_GPIO_BASE + 14)
+#define TOSA_GPIO_BAT1_TH_ON            (TOSA_TC6393XB_GPIO_BASE + 15)
+
+/*
+ * Timing Generator
+ */
+#define TG_PNLCTL                       0x00
+#define TG_TPOSCTL                      0x01
+#define TG_DUTYCTL                      0x02
+#define TG_GPOSR                        0x03
+#define TG_GPODR1                       0x04
+#define TG_GPODR2                       0x05
+#define TG_PINICTL                      0x06
+#define TG_HPOSCTL                      0x07
+
+/*
+ * PXA GPIOs
+ */
+#define TOSA_GPIO_POWERON               (0)
+#define TOSA_GPIO_RESET                 (1)
+#define TOSA_GPIO_AC_IN                 (2)
+#define TOSA_GPIO_RECORD_BTN            (3)
+#define TOSA_GPIO_SYNC                  (4)     /* Cradle SYNC Button */
+#define TOSA_GPIO_USB_IN                (5)
+#define TOSA_GPIO_JACKET_DETECT         (7)
+#define TOSA_GPIO_nSD_DETECT            (9)
+#define TOSA_GPIO_nSD_INT               (10)
+#define TOSA_GPIO_TC6393XB_CLK          (11)
+#define TOSA_GPIO_BAT1_CRG              (12)
+#define TOSA_GPIO_CF_CD                 (13)
+#define TOSA_GPIO_BAT0_CRG              (14)
+#define TOSA_GPIO_TC6393XB_INT          (15)
+#define TOSA_GPIO_BAT0_LOW              (17)
+#define TOSA_GPIO_TC6393XB_RDY          (18)
+#define TOSA_GPIO_ON_RESET              (19)
+#define TOSA_GPIO_EAR_IN                (20)
+#define TOSA_GPIO_CF_IRQ                (21)    /* CF slot0 Ready */
+#define TOSA_GPIO_ON_KEY                (22)
+#define TOSA_GPIO_VGA_LINE              (27)
+#define TOSA_GPIO_TP_INT                (32)    /* Touch Panel pen down interrupt */
+#define TOSA_GPIO_JC_CF_IRQ             (36)    /* CF slot1 Ready */
+#define TOSA_GPIO_BAT_LOCKED            (38)    /* Battery locked */
+#define TOSA_GPIO_IRDA_TX               (47)
+#define TOSA_GPIO_TG_SPI_SCLK           (81)
+#define TOSA_GPIO_TG_SPI_CS             (82)
+#define TOSA_GPIO_TG_SPI_MOSI           (83)
+#define TOSA_GPIO_BAT1_LOW              (84)
+
+#define TOSA_GPIO_HP_IN                 GPIO_EAR_IN
+
+#define TOSA_GPIO_MAIN_BAT_LOW          GPIO_BAT0_LOW
+
+#define TOSA_KEY_STROBE_NUM             (11)
+#define TOSA_KEY_SENSE_NUM              (7)
+
+#define TOSA_GPIO_HIGH_STROBE_BIT       (0xfc000000)
+#define TOSA_GPIO_LOW_STROBE_BIT        (0x0000001f)
+#define TOSA_GPIO_ALL_SENSE_BIT         (0x00000fe0)
+#define TOSA_GPIO_ALL_SENSE_RSHIFT      (5)
+#define TOSA_GPIO_STROBE_BIT(a)         GPIO_bit(58+(a))
+#define TOSA_GPIO_SENSE_BIT(a)          GPIO_bit(69+(a))
+#define TOSA_GAFR_HIGH_STROBE_BIT       (0xfff00000)
+#define TOSA_GAFR_LOW_STROBE_BIT        (0x000003ff)
+#define TOSA_GAFR_ALL_SENSE_BIT         (0x00fffc00)
+#define TOSA_GPIO_KEY_SENSE(a)          (69+(a))
+#define TOSA_GPIO_KEY_STROBE(a)         (58+(a))
+
+/*
+ * Interrupts
+ */
+#define TOSA_IRQ_GPIO_WAKEUP            IRQ_GPIO(TOSA_GPIO_WAKEUP)
+#define TOSA_IRQ_GPIO_AC_IN             IRQ_GPIO(TOSA_GPIO_AC_IN)
+#define TOSA_IRQ_GPIO_RECORD_BTN        IRQ_GPIO(TOSA_GPIO_RECORD_BTN)
+#define TOSA_IRQ_GPIO_SYNC              IRQ_GPIO(TOSA_GPIO_SYNC)
+#define TOSA_IRQ_GPIO_USB_IN            IRQ_GPIO(TOSA_GPIO_USB_IN)
+#define TOSA_IRQ_GPIO_JACKET_DETECT     IRQ_GPIO(TOSA_GPIO_JACKET_DETECT)
+#define TOSA_IRQ_GPIO_nSD_INT           IRQ_GPIO(TOSA_GPIO_nSD_INT)
+#define TOSA_IRQ_GPIO_nSD_DETECT        IRQ_GPIO(TOSA_GPIO_nSD_DETECT)
+#define TOSA_IRQ_GPIO_BAT1_CRG          IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
+#define TOSA_IRQ_GPIO_CF_CD             IRQ_GPIO(TOSA_GPIO_CF_CD)
+#define TOSA_IRQ_GPIO_BAT0_CRG          IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
+#define TOSA_IRQ_GPIO_TC6393XB_INT      IRQ_GPIO(TOSA_GPIO_TC6393XB_INT)
+#define TOSA_IRQ_GPIO_BAT0_LOW          IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
+#define TOSA_IRQ_GPIO_EAR_IN            IRQ_GPIO(TOSA_GPIO_EAR_IN)
+#define TOSA_IRQ_GPIO_CF_IRQ            IRQ_GPIO(TOSA_GPIO_CF_IRQ)
+#define TOSA_IRQ_GPIO_ON_KEY            IRQ_GPIO(TOSA_GPIO_ON_KEY)
+#define TOSA_IRQ_GPIO_VGA_LINE          IRQ_GPIO(TOSA_GPIO_VGA_LINE)
+#define TOSA_IRQ_GPIO_TP_INT            IRQ_GPIO(TOSA_GPIO_TP_INT)
+#define TOSA_IRQ_GPIO_JC_CF_IRQ         IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ)
+#define TOSA_IRQ_GPIO_BAT_LOCKED        IRQ_GPIO(TOSA_GPIO_BAT_LOCKED)
+#define TOSA_IRQ_GPIO_BAT1_LOW          IRQ_GPIO(TOSA_GPIO_BAT1_LOW)
+#define TOSA_IRQ_GPIO_KEY_SENSE(a)      IRQ_GPIO(69+(a))
+
+#define TOSA_IRQ_GPIO_MAIN_BAT_LOW      IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
+
+#define TOSA_KEY_SYNC           KEY_102ND /* ??? */
+
+#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES
+#define TOSA_KEY_RECORD         KEY_YEN
+#define TOSA_KEY_ADDRESSBOOK    KEY_KATAKANA
+#define TOSA_KEY_CANCEL         KEY_ESC
+#define TOSA_KEY_CENTER         KEY_HIRAGANA
+#define TOSA_KEY_OK             KEY_HENKAN
+#define TOSA_KEY_CALENDAR       KEY_KATAKANAHIRAGANA
+#define TOSA_KEY_HOMEPAGE       KEY_HANGEUL
+#define TOSA_KEY_LIGHT          KEY_MUHENKAN
+#define TOSA_KEY_MENU           KEY_HANJA
+#define TOSA_KEY_FN             KEY_RIGHTALT
+#define TOSA_KEY_MAIL           KEY_ZENKAKUHANKAKU
+#else
+#define TOSA_KEY_RECORD         KEY_RECORD
+#define TOSA_KEY_ADDRESSBOOK    KEY_ADDRESSBOOK
+#define TOSA_KEY_CANCEL         KEY_CANCEL
+#define TOSA_KEY_CENTER         KEY_SELECT /* ??? */
+#define TOSA_KEY_OK             KEY_OK
+#define TOSA_KEY_CALENDAR       KEY_CALENDAR
+#define TOSA_KEY_HOMEPAGE       KEY_HOMEPAGE
+#define TOSA_KEY_LIGHT          KEY_KBDILLUMTOGGLE
+#define TOSA_KEY_MENU           KEY_MENU
+#define TOSA_KEY_FN             KEY_FN
+#define TOSA_KEY_MAIL           KEY_MAIL
+#endif
+
+#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/tosa_bt.h b/arch/arm/mach-pxa/include/mach/tosa_bt.h
new file mode 100644
index 000000000000..efc3c3d3b75d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/tosa_bt.h
@@ -0,0 +1,22 @@
+/*
+ * Tosa bluetooth built-in chip control.
+ *
+ * Later it may be shared with some other platforms.
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef TOSA_BT_H
+#define TOSA_BT_H
+
+struct tosa_bt_data {
+        int gpio_pwr;
+        int gpio_reset;
+};
+
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
new file mode 100644
index 000000000000..641d0ec110bb
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -0,0 +1,106 @@
+/************************************************************************
+ * Include file for TRIZEPS4 SoM and ConXS eval-board
+ * Copyright (c) Jürgen Schindele
+ * 2006
+ ************************************************************************/
+
+/*
+ * Includes/Defines
+ */
+#ifndef _TRIPEPS4_H_
+#define _TRIPEPS4_H_
+
+/* physical memory regions */
+#define TRIZEPS4_FLASH_PHYS     (PXA_CS0_PHYS)  /* Flash region */
+#define TRIZEPS4_DISK_PHYS      (PXA_CS1_PHYS)  /* Disk On Chip region */
+#define TRIZEPS4_ETH_PHYS       (PXA_CS2_PHYS)  /* Ethernet DM9000 region */
+#define TRIZEPS4_PIC_PHYS       (PXA_CS3_PHYS)  /* Logic chip on ConXS-Board */
+#define TRIZEPS4_SDRAM_BASE     0xa0000000      /* SDRAM region */
+
+#define TRIZEPS4_CFSR_PHYS      (PXA_CS3_PHYS)                  /* Logic chip on ConXS-Board CSFR register */
+#define TRIZEPS4_BOCR_PHYS      (PXA_CS3_PHYS+0x02000000)       /* Logic chip on ConXS-Board BOCR register */
+#define TRIZEPS4_IRCR_PHYS      (PXA_CS3_PHYS+0x02400000)       /* Logic chip on ConXS-Board IRCR register*/
+#define TRIZEPS4_UPSR_PHYS      (PXA_CS3_PHYS+0x02800000)       /* Logic chip on ConXS-Board UPSR register*/
+#define TRIZEPS4_DICR_PHYS      (PXA_CS3_PHYS+0x03800000)       /* Logic chip on ConXS-Board DICR register*/
+
+/* virtual memory regions */
+#define TRIZEPS4_DISK_VIRT      0xF0000000      /* Disk On Chip region */
+
+#define TRIZEPS4_PIC_VIRT       0xF0100000      /* not used */
+#define TRIZEPS4_CFSR_VIRT      0xF0100000
+#define TRIZEPS4_BOCR_VIRT      0xF0200000
+#define TRIZEPS4_DICR_VIRT      0xF0300000
+#define TRIZEPS4_IRCR_VIRT      0xF0400000
+#define TRIZEPS4_UPSR_VIRT      0xF0500000
+
+/* size of flash */
+#define TRIZEPS4_FLASH_SIZE     0x02000000      /* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000             101
+#define TRIZEPS4_ETH_IRQ        IRQ_GPIO(GPIO_DM9000)
+
+/* UCB1400 audio / TS-controller */
+#define GPIO_UCB1400            1
+#define TRIZEPS4_UCB1400_IRQ    IRQ_GPIO(GPIO_UCB1400)
+
+/* PCMCIA socket Compact Flash */
+#define GPIO_PCD                11              /* PCMCIA Card Detect */
+#define TRIZEPS4_CD_IRQ         IRQ_GPIO(GPIO_PCD)
+#define GPIO_PRDY               13              /* READY / nINT */
+#define TRIZEPS4_READY_NINT     IRQ_GPIO(GPIO_PRDY)
+
+/* MMC socket */
+#define GPIO_MMC_DET            12
+#define TRIZEPS4_MMC_IRQ        IRQ_GPIO(GPIO_MMC_DET)
+
+/* LEDS using tx2 / rx2 */
+#define GPIO_SYS_BUSY_LED       46
+#define GPIO_HEARTBEAT_LED      47
+
+/* Off-module PIC on ConXS board */
+#define GPIO_PIC                0
+#define TRIZEPS4_PIC_IRQ        IRQ_GPIO(GPIO_PIC)
+
+#define CFSR_P2V(x)             ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
+#define CFSR_V2P(x)             ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
+
+#define BCR_P2V(x)              ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
+#define BCR_V2P(x)              ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
+
+#define DCR_P2V(x)              ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
+#define DCR_V2P(x)              ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+
+#ifndef __ASSEMBLY__
+#define ConXS_CFSR              (*((volatile unsigned short *)CFSR_P2V(0x0C000000)))
+#define ConXS_BCR               (*((volatile unsigned short *)BCR_P2V(0x0E000000)))
+#define ConXS_DCR               (*((volatile unsigned short *)DCR_P2V(0x0F800000)))
+#else
+#define ConXS_CFSR              CFSR_P2V(0x0C000000)
+#define ConXS_BCR               BCR_P2V(0x0E000000)
+#define ConXS_DCR               DCR_P2V(0x0F800000)
+#endif
+
+#define ConXS_CFSR_BVD_MASK     0x0003
+#define ConXS_CFSR_BVD1         (1 << 0)
+#define ConXS_CFSR_BVD2         (1 << 1)
+#define ConXS_CFSR_VS_MASK      0x000C
+#define ConXS_CFSR_VS1          (1 << 2)
+#define ConXS_CFSR_VS2          (1 << 3)
+#define ConXS_CFSR_VS_5V        (0x3 << 2)
+#define ConXS_CFSR_VS_3V3       0x0
+
+#define ConXS_BCR_S0_POW_EN0    (1 << 0)
+#define ConXS_BCR_S0_POW_EN1    (1 << 1)
+#define ConXS_BCR_L_DISP        (1 << 4)
+#define ConXS_BCR_CF_BUF_EN     (1 << 5)
+#define ConXS_BCR_CF_RESET      (1 << 7)
+#define ConXS_BCR_S0_VCC_3V3    0x1
+#define ConXS_BCR_S0_VCC_5V0    0x2
+#define ConXS_BCR_S0_VPP_12V    0x4
+#define ConXS_BCR_S0_VPP_3V3    0x8
+
+#define ConXS_IRCR_MODE         (1 << 0)
+#define ConXS_IRCR_SD           (1 << 1)
+
+#endif /* _TRIPEPS4_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/include/mach/udc.h
new file mode 100644
index 000000000000..2f82332e81a0
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-pxa/include/mach/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
new file mode 100644
index 000000000000..21e3e890af98
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-pxa/include/mach/uncompress.h
+ *
+ * Author:      Nicolas Pitre
+ * Copyright:   (C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+
+#define __REG(x)       ((volatile unsigned long *)x)
+
+static volatile unsigned long *UART = FFUART;
+
+static inline void putc(char c)
+{
+        if (!(UART[UART_IER] & IER_UUE))
+                return;
+        while (!(UART[UART_LSR] & LSR_TDRQ))
+                barrier();
+        UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+        if (machine_is_littleton())
+                UART = STUART;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
new file mode 100644
index 000000000000..e90c5eeb81dd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/vmalloc.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-pxa/include/mach/vmalloc.h
+ *
+ * Author:      Nicolas Pitre
+ * Copyright:   (C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
new file mode 100644
index 000000000000..0d35ca04731e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_ARCH_ZYLONITE_H
+#define __ASM_ARCH_ZYLONITE_H
+
+#define ZYLONITE_ETH_PHYS       0x14000000
+
+#define EXT_GPIO(x)             (128 + (x))
+
+/* the following variables are processor specific and initialized
+ * by the corresponding zylonite_pxa3xx_init()
+ */
+struct platform_mmc_slot {
+        int gpio_cd;
+        int gpio_wp;
+};
+
+extern struct platform_mmc_slot zylonite_mmc_slot[];
+
+extern int gpio_eth_irq;
+extern int gpio_debug_led1;
+extern int gpio_debug_led2;
+
+extern int wm9713_irq;
+
+extern int lcd_id;
+extern int lcd_orientation;
+
+#ifdef CONFIG_CPU_PXA300
+extern void zylonite_pxa300_init(void);
+#else
+static inline void zylonite_pxa300_init(void)
+{
+        if (cpu_is_pxa300() || cpu_is_pxa310())
+                panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__);
+}
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+extern void zylonite_pxa320_init(void);
+#else
+static inline void zylonite_pxa320_init(void)
+{
+        if (cpu_is_pxa320())
+                panic("%s: PXA320 not supported\n", __FUNCTION__);
+}
+#endif
+
+#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index fbff557bb225..5e95c5372fec 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,10 +17,10 @@
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
index 38aa9270540e..18b20d469410 100644
--- a/arch/arm/mach-pxa/leds-idp.c
+++ b/arch/arm/mach-pxa/leds-idp.c
@@ -14,12 +14,12 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/idp.h>
+#include <mach/pxa-regs.h>
+#include <mach/idp.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
index afbc6698e27c..1a258029c33c 100644
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ b/arch/arm/mach-pxa/leds-lubbock.c
@@ -13,11 +13,11 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
index 065293eb0d82..95e06b849634 100644
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ b/arch/arm/mach-pxa/leds-mainstone.c
@@ -12,12 +12,12 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
+#include <mach/pxa-regs.h>
+#include <mach/mainstone.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
index 21880daabafe..3bc29007df3a 100644
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ b/arch/arm/mach-pxa/leds-trizeps4.c
@@ -12,14 +12,14 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/types.h>
 #include <asm/leds.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 530654474bb2..58f3402a0375 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,25 +20,27 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/littleton.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/ssp.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
+#include <mach/littleton.h>
 
 #include "generic.h"
 
@@ -101,18 +103,26 @@ static struct resource smc91x_resources[] = {
         [1] = {
                 .start  = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
                 .end    = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
-                .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
         }
 };
 
+static struct smc91x_platdata littleton_smc91x_info = {
+        .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+                  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = 0,
         .num_resources  = ARRAY_SIZE(smc91x_resources),
         .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &littleton_smc91x_info,
+        },
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /* use bit 30, 31 as the indicator of command parameter number */
 #define CMD0(x)         ((0x00000000) | ((x) << 9))
 #define CMD1(x, x1)     ((0x40000000) | ((x) << 9) | 0x100 | (x1))
@@ -311,9 +321,9 @@ static void littleton_init_lcd(void)
 }
 #else
 static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
         /* KEY(row, col, key_code) */
         KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
@@ -361,6 +371,57 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+        [0] = {
+                .name        = "Bootloader",
+                .offset      = 0,
+                .size        = 0x060000,
+                .mask_flags  = MTD_WRITEABLE, /* force read-only */
+        },
+        [1] = {
+                .name        = "Kernel",
+                .offset      = 0x060000,
+                .size        = 0x200000,
+                .mask_flags  = MTD_WRITEABLE, /* force read-only */
+        },
+        [2] = {
+                .name        = "Filesystem",
+                .offset      = 0x0260000,
+                .size        = 0x3000000,     /* 48M - rootfs */
+        },
+        [3] = {
+                .name        = "MassStorage",
+                .offset      = 0x3260000,
+                .size        = 0x3d40000,
+        },
+        [4] = {
+                .name        = "BBT",
+                .offset      = 0x6FA0000,
+                .size        = 0x80000,
+                .mask_flags  = MTD_WRITEABLE,  /* force read-only */
+        },
+        /* NOTE: we reserve some blocks at the end of the NAND flash for
+         * bad block management, and the max number of relocation blocks
+         * differs on different platforms. Please take care with it when
+         * defining the partition table.
+         */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+        .enable_arbiter = 1,
+        .parts          = littleton_nand_partitions,
+        .nr_parts       = ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+        pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init littleton_init(void)
 {
         /* initialize MFP configurations */
@@ -374,6 +435,7 @@ static void __init littleton_init(void)
 
         littleton_init_lcd();
         littleton_init_keypad();
+        littleton_init_nand();
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index cc1c4fa06145..b7038948d1d4 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -29,7 +29,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -38,15 +38,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/lpd270.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/lpd270.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -113,7 +113,7 @@ static void __init lpd270_init_irq(void)
                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
         }
         set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
-        set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+        set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a3fae4139203..bb9e09208b9f 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -21,15 +21,16 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <asm/arch/pxa2xx_spi.h>
+#include <mach/pxa2xx_spi.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,15 +41,15 @@
 
 #include <asm/hardware/sa1111.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/lubbock.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/audio.h>
+#include <mach/lubbock.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -151,7 +152,7 @@ static void __init lubbock_init_irq(void)
         }
 
         set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
-        set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+        set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
@@ -223,15 +224,7 @@ static struct platform_device sa1111_device = {
  * for the temperature sensors.
  */
 static struct pxa2xx_spi_master pxa_ssp_master_info = {
-        .num_chipselect = 0,
-};
-
-static struct platform_device pxa_ssp = {
-        .name           = "pxa2xx-spi",
-        .id             = 1,
-        .dev = {
-                .platform_data  = &pxa_ssp_master_info,
-        },
+        .num_chipselect = 1,
 };
 
 static int lubbock_ads7846_pendown_state(void)
@@ -292,11 +285,18 @@ static struct resource smc91x_resources[] = {
         },
 };
 
+static struct smc91x_platdata lubbock_smc91x_info = {
+        .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = -1,
         .num_resources  = ARRAY_SIZE(smc91x_resources),
         .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &lubbock_smc91x_info,
+        },
 };
 
 static struct resource flash_resources[] = {
@@ -367,7 +367,6 @@ static struct platform_device *devices[] __initdata = {
         &smc91x_device,
         &lubbock_flash_device[0],
         &lubbock_flash_device[1],
-        &pxa_ssp,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -471,6 +470,7 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
         } else if (mode & IR_FIRMODE) {
                 LUB_MISC_WR |= 1 << 4;
         }
+        pxa2xx_transceiver_mode(dev, mode);
         local_irq_restore(flags);
 }
 
@@ -501,6 +501,7 @@ static void __init lubbock_init(void)
         lubbock_flash_data[flashboot].name = "boot-rom";
         (void) platform_add_devices(devices, ARRAY_SIZE(devices));
 
+        pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
         spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 01b2fa790217..143f28adaf95 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -17,34 +17,32 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 
-#include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/magician.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/magician.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "devices.h"
 #include "generic.h"
 
-static unsigned long magician_pin_config[] = {
+static unsigned long magician_pin_config[] __initdata = {
 
         /* SDRAM and Static Memory I/O Signals */
         GPIO20_nSDCS_2,
@@ -134,6 +132,7 @@ static unsigned long magician_pin_config[] = {
 static void magician_irda_transceiver_mode(struct device *dev, int mode)
 {
         gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data magician_ficp_info = {
@@ -399,6 +398,7 @@ static struct platform_pwm_backlight_data backlight_data = {
 
 static struct platform_device backlight = {
         .name = "pwm-backlight",
+        .id   = -1,
         .dev  = {
                 .parent        = &pxa27x_device_pwm0.dev,
                 .platform_data = &backlight_data,
@@ -511,6 +511,37 @@ static struct platform_device pasic3 = {
  * External power
  */
 
+static int power_supply_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+        if (ret)
+                goto err_cs_ac;
+        ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
+        if (ret)
+                goto err_cs_usb;
+        ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
+        if (ret)
+                goto err_chg_en;
+        ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
+        if (!ret)
+                ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
+        if (ret)
+                goto err_nchg_en;
+
+        return 0;
+
+err_nchg_en:
+        gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+err_chg_en:
+        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+err_cs_usb:
+        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+err_cs_ac:
+        return ret;
+}
+
 static int magician_is_ac_online(void)
 {
         return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
@@ -527,14 +558,24 @@ static void magician_set_charge(int flags)
         gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
 }
 
+static void power_supply_exit(struct device *dev)
+{
+        gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
+        gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+        gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+}
+
 static char *magician_supplicants[] = {
         "ds2760-battery.0", "backup-battery"
 };
 
 static struct pda_power_pdata power_supply_info = {
+        .init            = power_supply_init,
         .is_ac_online    = magician_is_ac_online,
         .is_usb_online   = magician_is_usb_online,
         .set_charge      = magician_set_charge,
+        .exit            = power_supply_exit,
         .supplied_to     = magician_supplicants,
         .num_supplicants = ARRAY_SIZE(magician_supplicants),
 };
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f2e9e7c4da8e..d44af761564d 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -26,12 +26,13 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,17 +41,17 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/mainstone.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/mainstone.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -110,9 +111,9 @@ static unsigned long mainstone_pin_config[] = {
         GPIO45_AC97_SYSCLK,
 
         /* Keypad */
-        GPIO93_KP_DKIN_0        | WAKEUP_ON_LEVEL_HIGH,
-        GPIO94_KP_DKIN_1        | WAKEUP_ON_LEVEL_HIGH,
-        GPIO95_KP_DKIN_2        | WAKEUP_ON_LEVEL_HIGH,
+        GPIO93_KP_DKIN_0,
+        GPIO94_KP_DKIN_1,
+        GPIO95_KP_DKIN_2,
         GPIO100_KP_MKIN_0       | WAKEUP_ON_LEVEL_HIGH,
         GPIO101_KP_MKIN_1       | WAKEUP_ON_LEVEL_HIGH,
         GPIO102_KP_MKIN_2       | WAKEUP_ON_LEVEL_HIGH,
@@ -190,7 +191,7 @@ static void __init mainstone_init_irq(void)
         MST_INTSETCLR = 0;
 
         set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
-        set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+        set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
@@ -240,11 +241,19 @@ static struct resource smc91x_resources[] = {
         }
 };
 
+static struct smc91x_platdata mainstone_smc91x_info = {
+        .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+                  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = 0,
         .num_resources  = ARRAY_SIZE(smc91x_resources),
         .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &mainstone_smc91x_info,
+        },
 };
 
 static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
@@ -455,6 +464,7 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
         } else if (mode & IR_FIRMODE) {
                 MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
         }
+        pxa2xx_transceiver_mode(dev, mode);
         if (mode & IR_OFF) {
                 MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
         } else {
@@ -513,7 +523,7 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = {
         .init           = mainstone_ohci_init,
 };
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int mainstone_matrix_keys[] = {
         KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
         KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index d1cdb4ecb0b8..925575f10acf 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -18,10 +18,10 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa2xx.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
 
 #include "generic.h"
 
@@ -39,6 +39,28 @@ struct gpio_desc {
 
 static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
 
+static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
+{
+        unsigned mask = GPIO_bit(gpio);
+
+        /* low power state */
+        switch (lpm) {
+        case MFP_LPM_DRIVE_HIGH:
+                PGSR(gpio) |= mask;
+                break;
+        case MFP_LPM_DRIVE_LOW:
+                PGSR(gpio) &= ~mask;
+                break;
+        case MFP_LPM_INPUT:
+                break;
+        default:
+                pr_warning("%s: invalid low power state for GPIO%d\n",
+                                __func__, gpio);
+                return -EINVAL;
+        }
+        return 0;
+}
+
 static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 {
         unsigned long gafr, mask = GPIO_bit(gpio);
@@ -57,21 +79,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
         else
                 GPDR(gpio) &= ~mask;
 
-        /* low power state */
-        switch (c & MFP_LPM_STATE_MASK) {
-        case MFP_LPM_DRIVE_HIGH:
-                PGSR(gpio) |= mask;
-                break;
-        case MFP_LPM_DRIVE_LOW:
-                PGSR(gpio) &= ~mask;
-                break;
-        case MFP_LPM_INPUT:
-                break;
-        default:
-                pr_warning("%s: invalid low power state for GPIO%d\n",
-                                __func__, gpio);
+        if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
                 return -EINVAL;
-        }
 
         /* give early warning if MFP_LPM_CAN_WAKEUP is set on the
          * configurations of those pins not able to wakeup
@@ -91,6 +100,18 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
         return 0;
 }
 
+static inline int __mfp_validate(int mfp)
+{
+        int gpio = mfp_to_gpio(mfp);
+
+        if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
+                pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+                return -1;
+        }
+
+        return gpio;
+}
+
 void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 {
         unsigned long flags;
@@ -99,13 +120,9 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 
         for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
 
-                gpio = mfp_to_gpio(MFP_PIN(*c));
-
-                if (!gpio_desc[gpio].valid) {
-                        pr_warning("%s: GPIO%d is invalid pin\n",
-                                __func__, gpio);
+                gpio = __mfp_validate(MFP_PIN(*c));
+                if (gpio < 0)
                         continue;
-                }
 
                 local_irq_save(flags);
 
@@ -116,6 +133,20 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
         }
 }
 
+void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
+{
+        unsigned long flags;
+        int gpio;
+
+        gpio = __mfp_validate(mfp);
+        if (gpio < 0)
+                return;
+
+        local_irq_save(flags);
+        __mfp_config_lpm(gpio, lpm);
+        local_irq_restore(flags);
+}
+
 int gpio_set_wake(unsigned int gpio, unsigned int on)
 {
         struct gpio_desc *d;
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 3a5b0fcbaf1f..eb197a6e8e94 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -19,10 +19,10 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-#include <asm/arch/pxa3xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/pxa3xx-regs.h>
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
new file mode 100644
index 000000000000..fe924a23debe
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -0,0 +1,416 @@
+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author:     Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *              Alex Osborne <ato@meshy.org>
+ *              Cristiano P. <cristianop@users.sourceforge.net>
+ *              Jan Herman <2hp@seznam.cz>
+ *              Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmtx.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+        /* MMC */
+        GPIO32_MMC_CLK,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+        GPIO112_MMC_CMD,
+
+        /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+
+        /* IrDA */
+        GPIO46_FICP_RXD,
+        GPIO47_FICP_TXD,
+
+        /* PWM */
+        GPIO16_PWM0_OUT,
+
+        /* USB */
+        GPIO13_GPIO,
+
+        /* PCMCIA */
+        GPIO48_nPOE,
+        GPIO49_nPWE,
+        GPIO50_nPIOR,
+        GPIO51_nPIOW,
+        GPIO85_nPCE_1,
+        GPIO54_nPCE_2,
+        GPIO79_PSKTSEL,
+        GPIO55_nPREG,
+        GPIO56_nPWAIT,
+        GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
+                                void *data)
+{
+        int err = 0;
+
+        /* Setup an interrupt for detecting card insert/remove events */
+        err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
+                        IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+                        IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+                        "SD/MMC card detect", data);
+        if (err) {
+                printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+                                __func__);
+                return err;
+        }
+
+        err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
+        if (err)
+                goto pwr_err;
+
+        err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
+        if (err)
+                goto ro_err;
+
+        printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+        return 0;
+
+ro_err:
+        gpio_free(GPIO_NR_PALMTX_SD_POWER);
+pwr_err:
+        free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+        return err;
+}
+
+static void palmtx_mci_exit(struct device *dev, void *data)
+{
+        gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+        gpio_free(GPIO_NR_PALMTX_SD_POWER);
+        free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+}
+
+static void palmtx_mci_power(struct device *dev, unsigned int vdd)
+{
+        struct pxamci_platform_data *p_d = dev->platform_data;
+        gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmtx_mci_get_ro(struct device *dev)
+{
+        return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmtx_mci_platform_data = {
+        .ocr_mask       = MMC_VDD_32_33 | MMC_VDD_33_34,
+        .setpower       = palmtx_mci_power,
+        .get_ro         = palmtx_mci_get_ro,
+        .init           = palmtx_mci_init,
+        .exit           = palmtx_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmtx_matrix_keys[] = {
+        KEY(0, 0, KEY_POWER),
+        KEY(0, 1, KEY_F1),
+        KEY(0, 2, KEY_ENTER),
+
+        KEY(1, 0, KEY_F2),
+        KEY(1, 1, KEY_F3),
+        KEY(1, 2, KEY_F4),
+
+        KEY(2, 0, KEY_UP),
+        KEY(2, 2, KEY_DOWN),
+
+        KEY(3, 0, KEY_RIGHT),
+        KEY(3, 2, KEY_LEFT),
+
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+        .matrix_key_rows        = 4,
+        .matrix_key_cols        = 3,
+        .matrix_key_map         = palmtx_matrix_keys,
+        .matrix_key_map_size    = ARRAY_SIZE(palmtx_matrix_keys),
+
+        .debounce_interval      = 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+        {KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+        .buttons        = palmtx_pxa_buttons,
+        .nbuttons       = ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+        .name   = "gpio-keys",
+        .id     = -1,
+        .dev    = {
+                .platform_data = &palmtx_pxa_keys_data,
+        },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtx_backlight_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
+        if (ret)
+                goto err;
+        ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
+        if (ret)
+                goto err2;
+
+        return 0;
+err2:
+        gpio_free(GPIO_NR_PALMTX_BL_POWER);
+err:
+        return ret;
+}
+
+static int palmtx_backlight_notify(int brightness)
+{
+        gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
+        gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
+        return brightness;
+}
+
+static void palmtx_backlight_exit(struct device *dev)
+{
+        gpio_free(GPIO_NR_PALMTX_BL_POWER);
+        gpio_free(GPIO_NR_PALMTX_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtx_backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = PALMTX_MAX_INTENSITY,
+        .dft_brightness = PALMTX_MAX_INTENSITY,
+        .pwm_period_ns  = PALMTX_PERIOD_NS,
+        .init           = palmtx_backlight_init,
+        .notify         = palmtx_backlight_notify,
+        .exit           = palmtx_backlight_exit,
+};
+
+static struct platform_device palmtx_backlight = {
+        .name   = "pwm-backlight",
+        .dev    = {
+                .parent         = &pxa27x_device_pwm0.dev,
+                .platform_data  = &palmtx_backlight_data,
+        },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
+{
+        gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
+        pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+        .transceiver_cap        = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+        .transceiver_mode       = palmtx_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static void palmtx_udc_command(int cmd)
+{
+        gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
+        udelay(50);
+        gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
+}
+
+static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+        .gpio_vbus              = GPIO_NR_PALMTX_USB_DETECT_N,
+        .gpio_vbus_inverted     = 1,
+        .udc_command            = palmtx_udc_command,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
+        if (ret)
+                goto err_cs_ac;
+
+        ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+        if (ret)
+                goto err_cs_usb;
+
+        return 0;
+
+err_cs_usb:
+        gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+err_cs_ac:
+        return ret;
+}
+
+static int palmtx_is_ac_online(void)
+{
+        return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static int palmtx_is_usb_online(void)
+{
+        return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+        gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
+        gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static char *palmtx_supplicants[] = {
+        "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+        .init            = power_supply_init,
+        .is_ac_online    = palmtx_is_ac_online,
+        .is_usb_online   = palmtx_is_usb_online,
+        .exit            = power_supply_exit,
+        .supplied_to     = palmtx_supplicants,
+        .num_supplicants = ARRAY_SIZE(palmtx_supplicants),
+};
+
+static struct platform_device power_supply = {
+        .name = "pda-power",
+        .id   = -1,
+        .dev  = {
+                .platform_data = &power_supply_info,
+        },
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtx_lcd_modes[] = {
+{
+        .pixclock       = 57692,
+        .xres           = 320,
+        .yres           = 480,
+        .bpp            = 16,
+
+        .left_margin    = 32,
+        .right_margin   = 1,
+        .upper_margin   = 7,
+        .lower_margin   = 1,
+
+        .hsync_len      = 4,
+        .vsync_len      = 1,
+},
+};
+
+static struct pxafb_mach_info palmtx_lcd_screen = {
+        .modes          = palmtx_lcd_modes,
+        .num_modes      = ARRAY_SIZE(palmtx_lcd_modes),
+        .lcd_conn       = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+        &palmtx_pxa_keys,
+#endif
+        &palmtx_backlight,
+        &power_supply,
+};
+
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+        .virtual        = PALMTX_PCMCIA_VIRT,
+        .pfn            = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+        .length         = PALMTX_PCMCIA_SIZE,
+        .type           = MT_DEVICE
+},
+};
+
+static void __init palmtx_map_io(void)
+{
+        pxa_map_io();
+        iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+
+        set_pxa_fb_info(&palmtx_lcd_screen);
+        pxa_set_mci_info(&palmtx_mci_platform_data);
+        pxa_set_udc_info(&palmtx_udc_info);
+        pxa_set_ac97_info(NULL);
+        pxa_set_ficp_info(&palmtx_ficp_platform_data);
+        pxa_set_keypad_info(&palmtx_keypad_platform_data);
+
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+        .phys_io        = PALMTX_PHYS_IO_START,
+        .io_pg_offst    = io_p2v(0x40000000),
+        .boot_params    = 0xa0000100,
+        .map_io         = palmtx_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = palmtx_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 3b945eb0aee3..730b9f6ede1d 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -24,15 +24,17 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
 #include <linux/leds.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx_spi.h>
-#include <asm/arch/pcm027.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pcm027.h>
 #include "generic.h"
 
 /*
@@ -108,6 +110,32 @@ static struct platform_device smc91x_device = {
         .resource       = smc91x_resources,
 };
 
+/*
+ * SPI host and devices
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+        .num_chipselect = 1,
+};
+
+static struct max7301_platform_data max7301_info = {
+        .base = -1,
+};
+
+/* bus_num must match id in pxa2xx_set_spi_info() call */
+static struct spi_board_info spi_board_info[] __initdata = {
+        {
+                .modalias       = "max7301",
+                .platform_data  = &max7301_info,
+                .max_speed_hz   = 13000000,
+                .bus_num        = 1,
+                .chip_select    = 0,
+                .mode           = SPI_MODE_0,
+        },
+};
+
+/*
+ * NOR flash
+ */
 static struct physmap_flash_data pcm027_flash_data = {
         .width  = 4,
 };
@@ -190,6 +218,9 @@ static void __init pcm027_init(void)
 #ifdef CONFIG_MACH_PCM990_BASEBOARD
         pcm990_baseboard_init();
 #endif
+
+        pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+        spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
 static void __init pcm027_map_io(void)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 5d87c7c866e4..420c9b3813f6 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -22,25 +22,40 @@
 
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/ide.h>
 #include <linux/i2c.h>
 #include <linux/pwm_backlight.h>
 
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/camera.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
 #include <asm/mach/map.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pcm990_baseboard.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pcm990_baseboard.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa27x.h>
 
 #include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+        /* MMC */
+        GPIO32_MMC_CLK,
+        GPIO112_MMC_CMD,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+        /* USB */
+        GPIO88_USBH1_PWR,
+        GPIO89_USBH1_PEN,
+        /* PWM0 */
+        GPIO16_PWM0_OUT,
+};
 
 /*
  * pcm990_lcd_power - control power supply to the LCD
@@ -277,16 +292,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 {
         int err;
 
-        /*
-         * enable GPIO for PXA27x MMC controller
-         */
-        pxa_gpio_mode(GPIO32_MMCCLK_MD);
-        pxa_gpio_mode(GPIO112_MMCCMD_MD);
-        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
         err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
                              "MMC card detect", data);
         if (err)
@@ -333,8 +338,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
  */
 static int pcm990_ohci_init(struct device *dev)
 {
-        pxa_gpio_mode(PCM990_USB_OVERCURRENT);
-        pxa_gpio_mode(PCM990_USB_PWR_EN);
         /*
          * disable USB port 2 and 3
          * power sense is active low
@@ -361,23 +364,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = {
  * PXA27x Camera specific stuff
  */
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+        /* CIF */
+        GPIO98_CIF_DD_0,
+        GPIO105_CIF_DD_1,
+        GPIO104_CIF_DD_2,
+        GPIO103_CIF_DD_3,
+        GPIO95_CIF_DD_4,
+        GPIO94_CIF_DD_5,
+        GPIO93_CIF_DD_6,
+        GPIO108_CIF_DD_7,
+        GPIO107_CIF_DD_8,
+        GPIO106_CIF_DD_9,
+        GPIO42_CIF_MCLK,
+        GPIO45_CIF_PCLK,
+        GPIO43_CIF_FV,
+        GPIO44_CIF_LV,
+};
+
 static int pcm990_pxacamera_init(struct device *dev)
 {
-        pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
-        pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
-        pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
-        pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
-        pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
-        pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
-        pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
-        pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
-        pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
-        pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
-        pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
-        pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
-        pxa_gpio_mode(GPIO43_CIF_FV_MD);
-        pxa_gpio_mode(GPIO44_CIF_LV_MD);
-
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
         return 0;
 }
 
@@ -449,8 +456,10 @@ static struct map_desc pcm990_io_desc[] __initdata = {
  */
 void __init pcm990_baseboard_init(void)
 {
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
         /* register CPLD access */
-        iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+        iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
 
         /* register CPLD's IRQ controller */
         pcm990_init_irq();
@@ -458,7 +467,6 @@ void __init pcm990_baseboard_init(void)
 #ifndef CONFIG_PCM990_DISPLAY_NONE
         set_pxa_fb_info(&pcm990_fbinfo);
 #endif
-        pxa_gpio_mode(GPIO16_PWM0_MD);
         platform_device_register(&pcm990_backlight_device);
 
         /* MMC */
@@ -473,9 +481,8 @@ void __init pcm990_baseboard_init(void)
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
         pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
-        i2c_register_board_info(0, pcm990_i2c_devices,
-                ARRAY_SIZE(pcm990_i2c_devices));
+        i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
 #endif
 
-        printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+        printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
 }
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 7d4debbdcca3..1b539e675579 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -16,12 +16,12 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 #include <asm/mach/time.h>
 
 struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f81c10cafd48..055ec63d768c 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -21,7 +21,7 @@
 #include <linux/pm.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -31,16 +31,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/poodle.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
+#include <mach/poodle.h>
+#include <mach/pxafb.h>
+#include <mach/sharpsl.h>
+#include <mach/ssp.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
@@ -267,6 +267,7 @@ static void poodle_irda_transceiver_mode(struct device *dev, int mode)
         } else {
                 GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
         }
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index ce28cd9fed16..316cd986da5c 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -20,7 +20,7 @@
 #include <linux/pwm.h>
 
 #include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 /* PWM registers and bits definitions */
 #define PWMCR           (0x00)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 4cd50e3005e9..9e5d8a8c6424 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -23,13 +23,14 @@
 #include <linux/suspend.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -109,6 +110,52 @@ static const struct clkops clk_pxa25x_lcd_ops = {
         .getrate        = clk_pxa25x_lcd_getrate,
 };
 
+static unsigned long gpio12_config_32k[] = {
+        GPIO12_32KHz,
+};
+
+static unsigned long gpio12_config_gpio[] = {
+        GPIO12_GPIO,
+};
+
+static void clk_gpio12_enable(struct clk *clk)
+{
+        pxa2xx_mfp_config(gpio12_config_32k, 1);
+}
+
+static void clk_gpio12_disable(struct clk *clk)
+{
+        pxa2xx_mfp_config(gpio12_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio12_ops = {
+        .enable         = clk_gpio12_enable,
+        .disable        = clk_gpio12_disable,
+};
+
+static unsigned long gpio11_config_3m6[] = {
+        GPIO11_3_6MHz,
+};
+
+static unsigned long gpio11_config_gpio[] = {
+        GPIO11_GPIO,
+};
+
+static void clk_gpio11_enable(struct clk *clk)
+{
+        pxa2xx_mfp_config(gpio11_config_3m6, 1);
+}
+
+static void clk_gpio11_disable(struct clk *clk)
+{
+        pxa2xx_mfp_config(gpio11_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio11_ops = {
+        .enable         = clk_gpio11_enable,
+        .disable        = clk_gpio11_disable,
+};
+
 /*
  * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
@@ -128,6 +175,8 @@ static struct clk pxa25x_clks[] = {
         INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
         INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
         INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
+        INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
+        INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
         INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
         INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
 
@@ -145,7 +194,10 @@ static struct clk pxa25x_clks[] = {
         INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
 };
 
-static struct clk gpio7_clk = INIT_CKOTHER("GPIO7_CK", &pxa25x_clks[4], NULL);
+static struct clk pxa2xx_clk_aliases[] = {
+        INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
+        INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
+};
 
 #ifdef CONFIG_PM
 
@@ -293,10 +345,13 @@ static int __init pxa25x_init(void)
         int i, ret = 0;
 
         /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-        if (cpu_is_pxa25x())
+        if (cpu_is_pxa255())
                 clks_register(&pxa25x_hwuart_clk, 1);
 
         if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
+
+                reset_status = RCSR;
+
                 clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
 
                 if ((ret = pxa_init_dma(16)))
@@ -317,10 +372,10 @@ static int __init pxa25x_init(void)
         }
 
         /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-        if (cpu_is_pxa25x())
+        if (cpu_is_pxa255())
                 ret = platform_device_register(&pxa_device_hwuart);
 
-        clks_register(&gpio7_clk, 1);
+        clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
 
         return ret;
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d5d14ea33f27..f9f6a9c31f4b 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -18,16 +18,17 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/i2c.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/reset.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -384,6 +385,9 @@ static int __init pxa27x_init(void)
         int i, ret = 0;
 
         if (cpu_is_pxa27x()) {
+
+                reset_status = RCSR;
+
                 clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
 
                 if ((ret = pxa_init_dma(32)))
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index d4f6415e8413..73d04d81c75a 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -14,9 +14,18 @@
 #include <linux/kernel.h>
 #include <linux/device.h>
 
-#include <asm/arch/mfp-pxa2xx.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+
+void pxa2xx_clear_reset_status(unsigned int mask)
+{
+        /* RESET_STATUS_* has a 1:1 mapping with RCSR */
+        RCSR = mask;
+}
 
 static unsigned long pxa2xx_mfp_fir[] = {
         GPIO46_FICP_RXD,
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 0a0d3877f212..494fc1f032db 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -15,9 +15,15 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp-pxa300.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
 
 static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 
@@ -79,15 +85,26 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
         MFP_ADDR_END,
 };
 
+static struct clk common_clks[] = {
+        PXA3xx_CKEN("NANDCLK", NAND, 156000000, 0, &pxa3xx_device_nand.dev),
+};
+
+static struct clk pxa310_clks[] = {
+        PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+};
+
 static int __init pxa300_init(void)
 {
         if (cpu_is_pxa300() || cpu_is_pxa310()) {
                 pxa3xx_init_mfp();
                 pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+                clks_register(ARRAY_AND_SIZE(common_clks));
         }
 
-        if (cpu_is_pxa310())
+        if (cpu_is_pxa310()) {
                 pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+                clks_register(ARRAY_AND_SIZE(pxa310_clks));
+        }
 
         return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 74128eb8f8d0..016eb18f01a3 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -15,10 +15,16 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa320.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
 
 static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 
@@ -74,16 +80,17 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
         MFP_ADDR_END,
 };
 
-static void __init pxa320_init_mfp(void)
-{
-        pxa3xx_init_mfp();
-        pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
-}
+static struct clk pxa320_clks[] = {
+        PXA3xx_CKEN("NANDCLK", NAND, 104000000, 0, &pxa3xx_device_nand.dev),
+};
 
 static int __init pxa320_init(void)
 {
-        if (cpu_is_pxa320())
-                pxa320_init_mfp();
+        if (cpu_is_pxa320()) {
+                pxa3xx_init_mfp();
+                pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+                clks_register(ARRAY_AND_SIZE(pxa320_clks));
+        }
 
         return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 15685d2b8f8c..03cbc38103ed 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -22,12 +22,13 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/ssp.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/reset.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/ssp.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -109,6 +110,12 @@ unsigned int pxa3xx_get_memclk_frequency_10khz(void)
         return (clk / 10000);
 }
 
+void pxa3xx_clear_reset_status(unsigned int mask)
+{
+        /* RESET_STATUS_* has a 1:1 mapping with ARSR */
+        ARSR = mask;
+}
+
 /*
  * Return the current AC97 clock frequency.
  */
@@ -144,7 +151,7 @@ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
         return hsio_clk;
 }
 
-static void clk_pxa3xx_cken_enable(struct clk *clk)
+void clk_pxa3xx_cken_enable(struct clk *clk)
 {
         unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -154,7 +161,7 @@ static void clk_pxa3xx_cken_enable(struct clk *clk)
                 CKENB |= mask;
 }
 
-static void clk_pxa3xx_cken_disable(struct clk *clk)
+void clk_pxa3xx_cken_disable(struct clk *clk)
 {
         unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -164,7 +171,7 @@ static void clk_pxa3xx_cken_disable(struct clk *clk)
                 CKENB &= ~mask;
 }
 
-static const struct clkops clk_pxa3xx_cken_ops = {
+const struct clkops clk_pxa3xx_cken_ops = {
         .enable         = clk_pxa3xx_cken_enable,
         .disable        = clk_pxa3xx_cken_disable,
 };
@@ -196,24 +203,6 @@ static const struct clkops clk_pout_ops = {
         .disable        = clk_pout_disable,
 };
 
-#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)  \
-        {                                               \
-                .name   = _name,                        \
-                .dev    = _dev,                         \
-                .ops    = &clk_pxa3xx_cken_ops,         \
-                .rate   = _rate,                        \
-                .cken   = CKEN_##_cken,                 \
-                .delay  = _delay,                       \
-        }
-
-#define PXA3xx_CK(_name, _cken, _ops, _dev)             \
-        {                                               \
-                .name   = _name,                        \
-                .dev    = _dev,                         \
-                .ops    = _ops,                         \
-                .cken   = CKEN_##_cken,                 \
-        }
-
 static struct clk pxa3xx_clks[] = {
         {
                 .name           = "CLK_POUT",
@@ -244,7 +233,6 @@ static struct clk pxa3xx_clks[] = {
 
         PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
         PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
-        PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
 };
 
 #ifdef CONFIG_PM
@@ -551,6 +539,9 @@ static int __init pxa3xx_init(void)
         int i, ret = 0;
 
         if (cpu_is_pxa3xx()) {
+
+                reset_status = ARSR;
+
                 /*
                  * clear RDH bit every time after reset
                  *
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
new file mode 100644
index 000000000000..13e6bfdfff60
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -0,0 +1,190 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa930.c
+ *
+ * Code specific to PXA930
+ *
+ * Copyright (C) 2007-2008 Marvell Internation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/hardware.h>
+#include <mach/mfp-pxa930.h>
+
+static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+
+        MFP_ADDR(GPIO0, 0x02e0),
+        MFP_ADDR(GPIO1, 0x02dc),
+        MFP_ADDR(GPIO2, 0x02e8),
+        MFP_ADDR(GPIO3, 0x02d8),
+        MFP_ADDR(GPIO4, 0x02e4),
+        MFP_ADDR(GPIO5, 0x02ec),
+        MFP_ADDR(GPIO6, 0x02f8),
+        MFP_ADDR(GPIO7, 0x02fc),
+        MFP_ADDR(GPIO8, 0x0300),
+        MFP_ADDR(GPIO9, 0x02d4),
+        MFP_ADDR(GPIO10, 0x02f4),
+        MFP_ADDR(GPIO11, 0x02f0),
+        MFP_ADDR(GPIO12, 0x0304),
+        MFP_ADDR(GPIO13, 0x0310),
+        MFP_ADDR(GPIO14, 0x0308),
+        MFP_ADDR(GPIO15, 0x030c),
+        MFP_ADDR(GPIO16, 0x04e8),
+        MFP_ADDR(GPIO17, 0x04f4),
+        MFP_ADDR(GPIO18, 0x04f8),
+        MFP_ADDR(GPIO19, 0x04fc),
+        MFP_ADDR(GPIO20, 0x0518),
+        MFP_ADDR(GPIO21, 0x051c),
+        MFP_ADDR(GPIO22, 0x04ec),
+        MFP_ADDR(GPIO23, 0x0500),
+        MFP_ADDR(GPIO24, 0x04f0),
+        MFP_ADDR(GPIO25, 0x0504),
+        MFP_ADDR(GPIO26, 0x0510),
+        MFP_ADDR(GPIO27, 0x0514),
+        MFP_ADDR(GPIO28, 0x0520),
+        MFP_ADDR(GPIO29, 0x0600),
+        MFP_ADDR(GPIO30, 0x0618),
+        MFP_ADDR(GPIO31, 0x0610),
+        MFP_ADDR(GPIO32, 0x060c),
+        MFP_ADDR(GPIO33, 0x061c),
+        MFP_ADDR(GPIO34, 0x0620),
+        MFP_ADDR(GPIO35, 0x0628),
+        MFP_ADDR(GPIO36, 0x062c),
+        MFP_ADDR(GPIO37, 0x0630),
+        MFP_ADDR(GPIO38, 0x0634),
+        MFP_ADDR(GPIO39, 0x0638),
+        MFP_ADDR(GPIO40, 0x063c),
+        MFP_ADDR(GPIO41, 0x0614),
+        MFP_ADDR(GPIO42, 0x0624),
+        MFP_ADDR(GPIO43, 0x0608),
+        MFP_ADDR(GPIO44, 0x0604),
+        MFP_ADDR(GPIO45, 0x050c),
+        MFP_ADDR(GPIO46, 0x0508),
+        MFP_ADDR(GPIO47, 0x02bc),
+        MFP_ADDR(GPIO48, 0x02b4),
+        MFP_ADDR(GPIO49, 0x02b8),
+        MFP_ADDR(GPIO50, 0x02c8),
+        MFP_ADDR(GPIO51, 0x02c0),
+        MFP_ADDR(GPIO52, 0x02c4),
+        MFP_ADDR(GPIO53, 0x02d0),
+        MFP_ADDR(GPIO54, 0x02cc),
+        MFP_ADDR(GPIO55, 0x029c),
+        MFP_ADDR(GPIO56, 0x02a0),
+        MFP_ADDR(GPIO57, 0x0294),
+        MFP_ADDR(GPIO58, 0x0298),
+        MFP_ADDR(GPIO59, 0x02a4),
+        MFP_ADDR(GPIO60, 0x02a8),
+        MFP_ADDR(GPIO61, 0x02b0),
+        MFP_ADDR(GPIO62, 0x02ac),
+        MFP_ADDR(GPIO63, 0x0640),
+        MFP_ADDR(GPIO64, 0x065c),
+        MFP_ADDR(GPIO65, 0x0648),
+        MFP_ADDR(GPIO66, 0x0644),
+        MFP_ADDR(GPIO67, 0x0674),
+        MFP_ADDR(GPIO68, 0x0658),
+        MFP_ADDR(GPIO69, 0x0654),
+        MFP_ADDR(GPIO70, 0x0660),
+        MFP_ADDR(GPIO71, 0x0668),
+        MFP_ADDR(GPIO72, 0x0664),
+        MFP_ADDR(GPIO73, 0x0650),
+        MFP_ADDR(GPIO74, 0x066c),
+        MFP_ADDR(GPIO75, 0x064c),
+        MFP_ADDR(GPIO76, 0x0670),
+        MFP_ADDR(GPIO77, 0x0678),
+        MFP_ADDR(GPIO78, 0x067c),
+        MFP_ADDR(GPIO79, 0x0694),
+        MFP_ADDR(GPIO80, 0x069c),
+        MFP_ADDR(GPIO81, 0x06a0),
+        MFP_ADDR(GPIO82, 0x06a4),
+        MFP_ADDR(GPIO83, 0x0698),
+        MFP_ADDR(GPIO84, 0x06bc),
+        MFP_ADDR(GPIO85, 0x06b4),
+        MFP_ADDR(GPIO86, 0x06b0),
+        MFP_ADDR(GPIO87, 0x06c0),
+        MFP_ADDR(GPIO88, 0x06c4),
+        MFP_ADDR(GPIO89, 0x06ac),
+        MFP_ADDR(GPIO90, 0x0680),
+        MFP_ADDR(GPIO91, 0x0684),
+        MFP_ADDR(GPIO92, 0x0688),
+        MFP_ADDR(GPIO93, 0x0690),
+        MFP_ADDR(GPIO94, 0x068c),
+        MFP_ADDR(GPIO95, 0x06a8),
+        MFP_ADDR(GPIO96, 0x06b8),
+        MFP_ADDR(GPIO97, 0x0410),
+        MFP_ADDR(GPIO98, 0x0418),
+        MFP_ADDR(GPIO99, 0x041c),
+        MFP_ADDR(GPIO100, 0x0414),
+        MFP_ADDR(GPIO101, 0x0408),
+        MFP_ADDR(GPIO102, 0x0324),
+        MFP_ADDR(GPIO103, 0x040c),
+        MFP_ADDR(GPIO104, 0x0400),
+        MFP_ADDR(GPIO105, 0x0328),
+        MFP_ADDR(GPIO106, 0x0404),
+
+        MFP_ADDR(nXCVREN, 0x0204),
+        MFP_ADDR(DF_CLE_nOE, 0x020c),
+        MFP_ADDR(DF_nADV1_ALE, 0x0218),
+        MFP_ADDR(DF_SCLK_E, 0x0214),
+        MFP_ADDR(DF_SCLK_S, 0x0210),
+        MFP_ADDR(nBE0, 0x021c),
+        MFP_ADDR(nBE1, 0x0220),
+        MFP_ADDR(DF_nADV2_ALE, 0x0224),
+        MFP_ADDR(DF_INT_RnB, 0x0228),
+        MFP_ADDR(DF_nCS0, 0x022c),
+        MFP_ADDR(DF_nCS1, 0x0230),
+        MFP_ADDR(nLUA, 0x0254),
+        MFP_ADDR(nLLA, 0x0258),
+        MFP_ADDR(DF_nWE, 0x0234),
+        MFP_ADDR(DF_nRE_nOE, 0x0238),
+        MFP_ADDR(DF_ADDR0, 0x024c),
+        MFP_ADDR(DF_ADDR1, 0x0250),
+        MFP_ADDR(DF_ADDR2, 0x025c),
+        MFP_ADDR(DF_ADDR3, 0x0260),
+        MFP_ADDR(DF_IO0, 0x023c),
+        MFP_ADDR(DF_IO1, 0x0240),
+        MFP_ADDR(DF_IO2, 0x0244),
+        MFP_ADDR(DF_IO3, 0x0248),
+        MFP_ADDR(DF_IO4, 0x0264),
+        MFP_ADDR(DF_IO5, 0x0268),
+        MFP_ADDR(DF_IO6, 0x026c),
+        MFP_ADDR(DF_IO7, 0x0270),
+        MFP_ADDR(DF_IO8, 0x0274),
+        MFP_ADDR(DF_IO9, 0x0278),
+        MFP_ADDR(DF_IO10, 0x027c),
+        MFP_ADDR(DF_IO11, 0x0280),
+        MFP_ADDR(DF_IO12, 0x0284),
+        MFP_ADDR(DF_IO13, 0x0288),
+        MFP_ADDR(DF_IO14, 0x028c),
+        MFP_ADDR(DF_IO15, 0x0290),
+
+        MFP_ADDR(GSIM_UIO, 0x0314),
+        MFP_ADDR(GSIM_UCLK, 0x0318),
+        MFP_ADDR(GSIM_UDET, 0x031c),
+        MFP_ADDR(GSIM_nURST, 0x0320),
+
+        MFP_ADDR(PMIC_INT, 0x06c8),
+
+        MFP_ADDR(RDY, 0x0200),
+
+        MFP_ADDR_END,
+};
+
+static int __init pxa930_init(void)
+{
+        if (cpu_is_pxa930()) {
+                pxa3xx_init_mfp();
+                pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+        }
+
+        return 0;
+}
+
+core_initcall(pxa930_init);
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
new file mode 100644
index 000000000000..9996c612c3d6
--- /dev/null
+++ b/arch/arm/mach-pxa/reset.c
@@ -0,0 +1,98 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <asm/io.h>
+#include <asm/proc-fns.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/reset.h>
+
+unsigned int reset_status;
+EXPORT_SYMBOL(reset_status);
+
+static void do_hw_reset(void);
+
+static int reset_gpio = -1;
+
+int init_gpio_reset(int gpio)
+{
+        int rc;
+
+        rc = gpio_request(gpio, "reset generator");
+        if (rc) {
+                printk(KERN_ERR "Can't request reset_gpio\n");
+                goto out;
+        }
+
+        rc = gpio_direction_input(gpio);
+        if (rc) {
+                printk(KERN_ERR "Can't configure reset_gpio for input\n");
+                gpio_free(gpio);
+                goto out;
+        }
+
+out:
+        if (!rc)
+                reset_gpio = gpio;
+
+        return rc;
+}
+
+/*
+ * Trigger GPIO reset.
+ * This covers various types of logic connecting gpio pin
+ * to RESET pins (nRESET or GPIO_RESET):
+ */
+static void do_gpio_reset(void)
+{
+        BUG_ON(reset_gpio == -1);
+
+        /* drive it low */
+        gpio_direction_output(reset_gpio, 0);
+        mdelay(2);
+        /* rising edge or drive high */
+        gpio_set_value(reset_gpio, 1);
+        mdelay(2);
+        /* falling edge */
+        gpio_set_value(reset_gpio, 0);
+
+        /* give it some time */
+        mdelay(10);
+
+        WARN_ON(1);
+        /* fallback */
+        do_hw_reset();
+}
+
+static void do_hw_reset(void)
+{
+        /* Initialize the watchdog and let it fire */
+        OWER = OWER_WME;
+        OSSR = OSSR_M3;
+        OSMR3 = OSCR + 368640;  /* ... in 100 ms */
+}
+
+void arch_reset(char mode)
+{
+        clear_reset_status(RESET_STATUS_ALL);
+
+        switch (mode) {
+        case 's':
+                /* Jump into ROM at address 0 */
+                cpu_reset(0);
+                break;
+        case 'h':
+                do_hw_reset();
+                break;
+        case 'g':
+                do_gpio_reset();
+                break;
+        }
+}
+
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
new file mode 100644
index 000000000000..e7ea91ce7f02
--- /dev/null
+++ b/arch/arm/mach-pxa/saar.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/saar.c
+ *
+ *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* SAAR MFP configurations */
+static mfp_cfg_t saar_mfp_cfg[] __initdata = {
+        /* Ethernet */
+        DF_nCS1_nCS3,
+        GPIO97_GPIO,
+};
+
+#define SAAR_ETH_PHYS   (0x14000000)
+
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .start  = (SAAR_ETH_PHYS + 0x300),
+                .end    = (SAAR_ETH_PHYS + 0xfffff),
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+                .end    = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+        }
+};
+
+static struct smc91x_platdata saar_smc91x_info = {
+        .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &saar_smc91x_info,
+        },
+};
+
+static void __init saar_init(void)
+{
+        /* initialize MFP configurations */
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
+
+        platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
+        /* Maintainer: Eric Miao <eric.miao@marvell.com> */
+        .phys_io        = 0x40000000,
+        .boot_params    = 0xa0000100,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa3xx_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = saar_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 34cd585075b0..e804ae09370c 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -22,12 +22,12 @@
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
 #include "sharpsl.h"
 
 struct battery_thresh spitz_battery_levels_acin[] = {
@@ -146,18 +146,18 @@ void sharpsl_pm_pxa_init(void)
         if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
                 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
         }
-        else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
+        else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
 
         if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
                 dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
         }
-        else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
+        else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
 
         if (sharpsl_pm.machinfo->gpio_fatal) {
                 if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
                         dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
                 }
-                else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
+                else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
         }
 
         if (sharpsl_pm.machinfo->batfull_irq)
@@ -166,7 +166,7 @@ void sharpsl_pm_pxa_init(void)
                 if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
                         dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
                 }
-                else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
+                else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
         }
 }
 
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 784716eb7fc5..a62c8375eb53 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -13,10 +13,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV     0x200a4000      // all banks
 #define CCCR_SLEEP      0x00000107      // L=7 2N=2 A=0 PPDIS=0 CPDIS=0
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index e7d0fcd9b43f..cd39005c98ff 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -35,17 +35,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/akita.h>
+#include <mach/spitz.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -450,6 +452,7 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode)
                 set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
         else
                 reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
 #ifdef CONFIG_MACH_AKITA
@@ -459,6 +462,7 @@ static void akita_irda_transceiver_mode(struct device *dev, int mode)
                 akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
         else
                 akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+        pxa2xx_transceiver_mode(dev, mode);
 }
 #endif
 
@@ -529,11 +533,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void spitz_poweroff(void)
 {
-        pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
-        GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
-
-        mdelay(1000);
-        arm_machine_restart('h');
+        arm_machine_restart('g');
 }
 
 static void spitz_restart(char mode)
@@ -547,6 +547,7 @@ static void spitz_restart(char mode)
 
 static void __init common_init(void)
 {
+        init_gpio_reset(SPITZ_GPIO_ON_RESET);
         pm_power_off = spitz_poweroff;
         arm_pm_restart = spitz_restart;
 
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 360354084ae4..8a40505dfd28 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -20,14 +20,14 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 0bb31982fb6f..9bd93c5f28b2 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -14,13 +14,6 @@
  *  IO-based SSP applications and allows easy port setup for DMA access.
  *
  *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- *
- *  Revision history:
- *   22nd Aug 2003 Initial version.
- *   20th Dec 2004 Added ssp_config for changing port config without
- *                 closing the port.
- *    4th Aug 2005 Added option to disable irq handler registration and
- *                 cleaned up irq and clock detection.
  */
 
 #include <linux/module.h>
@@ -38,10 +31,10 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/hardware.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
 
 #define TIMEOUT 100000
 
@@ -285,7 +278,7 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
                         goto out_region;
                 dev->irq = ssp->irq;
         } else
-                dev->irq = 0;
+                dev->irq = NO_IRQ;
 
         /* turn on SSP port clock */
         clk_enable(ssp->clk);
@@ -306,7 +299,8 @@ void ssp_exit(struct ssp_dev *dev)
         struct ssp_device *ssp = dev->ssp;
 
         ssp_disable(dev);
-        free_irq(dev->irq, dev);
+        if (dev->irq != NO_IRQ)
+                free_irq(dev->irq, dev);
         clk_disable(ssp->clk);
         ssp_free(ssp);
 }
@@ -360,6 +354,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
                 dev_err(&pdev->dev, "failed to allocate memory");
                 return -ENOMEM;
         }
+        ssp->pdev = pdev;
 
         ssp->clk = clk_get(&pdev->dev, "SSPCLK");
         if (IS_ERR(ssp->clk)) {
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 40bb70eff3fe..f3821cfda72f 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -11,10 +11,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
                 .text
 
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
new file mode 100644
index 000000000000..589d32b4fc46
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb.c
+ *
+ *  Support for the Marvell PXA930 Evaluation Board
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Tavor EVB MFP configurations */
+static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
+        /* Ethernet */
+        DF_nCS1_nCS3,
+        GPIO47_GPIO,
+};
+
+#define TAVOREVB_ETH_PHYS       (0x14000000)
+
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .start  = (TAVOREVB_ETH_PHYS + 0x300),
+                .end    = (TAVOREVB_ETH_PHYS + 0xfffff),
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+                .end    = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+        }
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+        .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &tavorevb_smc91x_info,
+        },
+};
+
+static void __init tavorevb_init(void)
+{
+        /* initialize MFP configurations */
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+
+        platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
+        /* Maintainer: Eric Miao <eric.miao@marvell.com> */
+        .phys_io        = 0x40000000,
+        .boot_params    = 0xa0000100,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa3xx_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = tavorevb_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 7b7c0179795b..67e18509d7bf 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -22,7 +22,7 @@
 #include <asm/cnt32_to_63.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 /*
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
new file mode 100644
index 000000000000..fb0294bd4310
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -0,0 +1,150 @@
+/*
+ * Bluetooth built-in chip control
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+#include <mach/tosa_bt.h>
+
+static void tosa_bt_on(struct tosa_bt_data *data)
+{
+        gpio_set_value(data->gpio_reset, 0);
+        gpio_set_value(data->gpio_pwr, 1);
+        gpio_set_value(data->gpio_reset, 1);
+        mdelay(20);
+        gpio_set_value(data->gpio_reset, 0);
+}
+
+static void tosa_bt_off(struct tosa_bt_data *data)
+{
+        gpio_set_value(data->gpio_reset, 1);
+        mdelay(10);
+        gpio_set_value(data->gpio_pwr, 0);
+        gpio_set_value(data->gpio_reset, 0);
+}
+
+static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+{
+        pr_info("BT_RADIO going: %s\n",
+                        state == RFKILL_STATE_ON ? "on" : "off");
+
+        if (state == RFKILL_STATE_ON) {
+                pr_info("TOSA_BT: going ON\n");
+                tosa_bt_on(data);
+        } else {
+                pr_info("TOSA_BT: going OFF\n");
+                tosa_bt_off(data);
+        }
+        return 0;
+}
+
+static int tosa_bt_probe(struct platform_device *dev)
+{
+        int rc;
+        struct rfkill *rfk;
+
+        struct tosa_bt_data *data = dev->dev.platform_data;
+
+        rc = gpio_request(data->gpio_reset, "Bluetooth reset");
+        if (rc)
+                goto err_reset;
+        rc = gpio_direction_output(data->gpio_reset, 0);
+        if (rc)
+                goto err_reset_dir;
+        rc = gpio_request(data->gpio_pwr, "Bluetooth power");
+        if (rc)
+                goto err_pwr;
+        rc = gpio_direction_output(data->gpio_pwr, 0);
+        if (rc)
+                goto err_pwr_dir;
+
+        rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+        if (!rfk) {
+                rc = -ENOMEM;
+                goto err_rfk_alloc;
+        }
+
+        rfk->name = "tosa-bt";
+        rfk->toggle_radio = tosa_bt_toggle_radio;
+        rfk->data = data;
+#ifdef CONFIG_RFKILL_LEDS
+        rfk->led_trigger.name = "tosa-bt";
+#endif
+
+        rc = rfkill_register(rfk);
+        if (rc)
+                goto err_rfkill;
+
+        platform_set_drvdata(dev, rfk);
+
+        return 0;
+
+err_rfkill:
+        if (rfk)
+                rfkill_free(rfk);
+        rfk = NULL;
+err_rfk_alloc:
+        tosa_bt_off(data);
+err_pwr_dir:
+        gpio_free(data->gpio_pwr);
+err_pwr:
+err_reset_dir:
+        gpio_free(data->gpio_reset);
+err_reset:
+        return rc;
+}
+
+static int __devexit tosa_bt_remove(struct platform_device *dev)
+{
+        struct tosa_bt_data *data = dev->dev.platform_data;
+        struct rfkill *rfk = platform_get_drvdata(dev);
+
+        platform_set_drvdata(dev, NULL);
+
+        if (rfk)
+                rfkill_unregister(rfk);
+        rfk = NULL;
+
+        tosa_bt_off(data);
+
+        gpio_free(data->gpio_pwr);
+        gpio_free(data->gpio_reset);
+
+        return 0;
+}
+
+static struct platform_driver tosa_bt_driver = {
+        .probe = tosa_bt_probe,
+        .remove = __devexit_p(tosa_bt_remove),
+
+        .driver = {
+                .name = "tosa-bt",
+                .owner = THIS_MODULE,
+        },
+};
+
+
+static int __init tosa_bt_init(void)
+{
+        return platform_driver_register(&tosa_bt_driver);
+}
+
+static void __exit tosa_bt_exit(void)
+{
+        platform_driver_unregister(&tosa_bt_driver);
+}
+
+module_init(tosa_bt_init);
+module_exit(tosa_bt_exit);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ab4a9f579913..5dab30eafddc 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -18,31 +18,33 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
 #include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <linux/pm.h>
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
+#include <linux/rfkill.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/tosa_bt.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/arch/tosa.h>
+#include <mach/tosa.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
@@ -86,7 +88,7 @@ static unsigned long tosa_pin_config[] = {
         GPIO6_MMC_CLK,
         GPIO8_MMC_CS0,
         GPIO9_GPIO, /* Detect */
-        // GPIO10 nSD_INT
+        GPIO10_GPIO, /* nSD_INT */
 
         /* CF */
         GPIO13_GPIO, /* CD_IRQ */
@@ -124,34 +126,34 @@ static unsigned long tosa_pin_config[] = {
         GPIO44_BTUART_CTS,
         GPIO45_BTUART_RTS,
 
-        /* IrDA */
-        GPIO46_STUART_RXD,
-        GPIO47_STUART_TXD,
-
         /* Keybd */
-        GPIO58_GPIO,
-        GPIO59_GPIO,
-        GPIO60_GPIO,
-        GPIO61_GPIO,
-        GPIO62_GPIO,
-        GPIO63_GPIO,
-        GPIO64_GPIO,
-        GPIO65_GPIO,
-        GPIO66_GPIO,
-        GPIO67_GPIO,
-        GPIO68_GPIO,
-        GPIO69_GPIO,
-        GPIO70_GPIO,
-        GPIO71_GPIO,
-        GPIO72_GPIO,
-        GPIO73_GPIO,
-        GPIO74_GPIO,
-        GPIO75_GPIO,
+        GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
 
         /* SPI */
         GPIO81_SSP2_CLK_OUT,
         GPIO82_SSP2_FRM_OUT,
         GPIO83_SSP2_TXD,
+
+        /* IrDA is managed in other way */
+        GPIO46_GPIO,
+        GPIO47_GPIO,
 };
 
 /*
@@ -249,6 +251,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 
         tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
+        err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
+        if (err) {
+                printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
+                goto err_gpio_detect;
+        }
+        err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
+        if (err)
+                goto err_gpio_detect_dir;
+
         err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
                           IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
                                 "MMC/SD card detect", data);
@@ -257,7 +268,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
                 goto err_irq;
         }
 
-        err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp");
+        err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
         if (err) {
                 printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
                 goto err_gpio_wp;
@@ -266,7 +277,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
         if (err)
                 goto err_gpio_wp_dir;
 
-        err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr");
+        err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
         if (err) {
                 printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
                 goto err_gpio_pwr;
@@ -275,8 +286,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
         if (err)
                 goto err_gpio_pwr_dir;
 
+        err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
+        if (err) {
+                printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+                goto err_gpio_int;
+        }
+        err = gpio_direction_input(TOSA_GPIO_nSD_INT);
+        if (err)
+                goto err_gpio_int_dir;
+
         return 0;
 
+err_gpio_int_dir:
+        gpio_free(TOSA_GPIO_nSD_INT);
+err_gpio_int:
 err_gpio_pwr_dir:
         gpio_free(TOSA_GPIO_PWR_ON);
 err_gpio_pwr:
@@ -285,6 +308,9 @@ err_gpio_wp_dir:
 err_gpio_wp:
         free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
 err_irq:
+err_gpio_detect_dir:
+        gpio_free(TOSA_GPIO_nSD_DETECT);
+err_gpio_detect:
         return err;
 }
 
@@ -306,9 +332,11 @@ static int tosa_mci_get_ro(struct device *dev)
 
 static void tosa_mci_exit(struct device *dev, void *data)
 {
+        gpio_free(TOSA_GPIO_nSD_INT);
         gpio_free(TOSA_GPIO_PWR_ON);
         gpio_free(TOSA_GPIO_SD_WP);
         free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+        gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
@@ -322,29 +350,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = {
 /*
  * Irda
  */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+        if (mode & IR_OFF) {
+                gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
+                pxa2xx_transceiver_mode(dev, mode);
+                gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+        } else {
+                pxa2xx_transceiver_mode(dev, mode);
+                gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
+        }
+}
+
 static int tosa_irda_startup(struct device *dev)
 {
         int ret;
 
+        ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
+        if (ret)
+                goto err_tx;
+        ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+        if (ret)
+                goto err_tx_dir;
+
         ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
         if (ret)
-                return ret;
+                goto err_pwr;
 
         ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
         if (ret)
-                gpio_free(TOSA_GPIO_IR_POWERDWN);
+                goto err_pwr_dir;
 
-        return ret;
-        }
+        tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
 
-static void tosa_irda_shutdown(struct device *dev)
-{
+        return 0;
+
+err_pwr_dir:
         gpio_free(TOSA_GPIO_IR_POWERDWN);
+err_pwr:
+err_tx_dir:
+        gpio_free(TOSA_GPIO_IRDA_TX);
+err_tx:
+        return ret;
 }
 
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+static void tosa_irda_shutdown(struct device *dev)
 {
-        gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF));
+        tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+        gpio_free(TOSA_GPIO_IR_POWERDWN);
+        gpio_free(TOSA_GPIO_IRDA_TX);
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
@@ -355,6 +409,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 };
 
 /*
+ * Tosa AC IN
+ */
+static int tosa_power_init(struct device *dev)
+{
+        int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
+        if (ret)
+                goto err_gpio_req;
+
+        ret = gpio_direction_input(TOSA_GPIO_AC_IN);
+        if (ret)
+                goto err_gpio_in;
+
+        return 0;
+
+err_gpio_in:
+        gpio_free(TOSA_GPIO_AC_IN);
+err_gpio_req:
+        return ret;
+}
+
+static void tosa_power_exit(struct device *dev)
+{
+        gpio_free(TOSA_GPIO_AC_IN);
+}
+
+static int tosa_power_ac_online(void)
+{
+        return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
+}
+
+static char *tosa_ac_supplied_to[] = {
+        "main-battery",
+        "backup-battery",
+        "jacket-battery",
+};
+
+static struct pda_power_pdata tosa_power_data = {
+        .init                   = tosa_power_init,
+        .is_ac_online           = tosa_power_ac_online,
+        .exit                   = tosa_power_exit,
+        .supplied_to            = tosa_ac_supplied_to,
+        .num_supplicants        = ARRAY_SIZE(tosa_ac_supplied_to),
+};
+
+static struct resource tosa_power_resource[] = {
+        {
+                .name           = "ac",
+                .start          = gpio_to_irq(TOSA_GPIO_AC_IN),
+                .end            = gpio_to_irq(TOSA_GPIO_AC_IN),
+                .flags          = IORESOURCE_IRQ |
+                                  IORESOURCE_IRQ_HIGHEDGE |
+                                  IORESOURCE_IRQ_LOWEDGE,
+        },
+};
+
+static struct platform_device tosa_power_device = {
+        .name                   = "pda-power",
+        .id                     = -1,
+        .dev.platform_data      = &tosa_power_data,
+        .resource               = tosa_power_resource,
+        .num_resources          = ARRAY_SIZE(tosa_power_resource),
+};
+
+/*
  * Tosa Keyboard
  */
 static struct platform_device tosakbd_device = {
@@ -439,7 +557,7 @@ static struct gpio_led tosa_gpio_leds[] = {
         },
         {
                 .name                   = "tosa:blue:bluetooth",
-                .default_trigger        = "none",
+                .default_trigger        = "tosa-bt",
                 .gpio                   = TOSA_GPIO_BT_LED,
         },
 };
@@ -457,21 +575,184 @@ static struct platform_device tosaled_device = {
         },
 };
 
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+        [0] = {
+                .start  = TOSA_LCDC_PHYS,
+                .end    = TOSA_LCDC_PHYS + 0x3ffffff,
+                .flags  = IORESOURCE_MEM,
+        },
+
+        [1] = {
+                .start  = TOSA_IRQ_GPIO_TC6393XB_INT,
+                .end    = TOSA_IRQ_GPIO_TC6393XB_INT,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+        int rc;
+
+        rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+        if (rc)
+                goto err_req_pclr;
+        rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+        if (rc)
+                goto err_req_suspend;
+        rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+        if (rc)
+                goto err_req_l3v;
+        rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+        if (rc)
+                goto err_dir_l3v;
+        rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+        if (rc)
+                goto err_dir_suspend;
+        rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+        if (rc)
+                goto err_dir_pclr;
+
+        mdelay(1);
+
+        gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+        mdelay(10);
+
+        gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+        gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+        return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+        gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+        gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+        gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+        return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+        gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+        gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+        gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+        return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+        gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+        mdelay(10);
+        gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+        mdelay(10);
+
+        return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+        gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+        gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+        return 0;
+}
+
+static struct mtd_partition tosa_nand_partition[] = {
+        {
+                .name   = "smf",
+                .offset = 0,
+                .size   = 7 * 1024 * 1024,
+        },
+        {
+                .name   = "root",
+                .offset = MTDPART_OFS_APPEND,
+                .size   = 28 * 1024 * 1024,
+        },
+        {
+                .name   = "home",
+                .offset = MTDPART_OFS_APPEND,
+                .size   = MTDPART_SIZ_FULL,
+        },
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
+        .options        = 0,
+        .offs           = 4,
+        .len            = 2,
+        .pattern        = scan_ff_pattern
+};
+
+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
+        .num_partitions = ARRAY_SIZE(tosa_nand_partition),
+        .partition      = tosa_nand_partition,
+        .badblock_pattern = &tosa_tc6393xb_nand_bbt,
+};
+
+static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+        .scr_pll2cr     = 0x0cc1,
+        .scr_gper       = 0x3300,
+        .scr_gpo_dsr    =
+                TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+        .scr_gpo_doecr  =
+                TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+
+        .irq_base       = IRQ_BOARD_START,
+        .gpio_base      = TOSA_TC6393XB_GPIO_BASE,
+
+        .enable         = tosa_tc6393xb_enable,
+        .disable        = tosa_tc6393xb_disable,
+        .suspend        = tosa_tc6393xb_suspend,
+        .resume         = tosa_tc6393xb_resume,
+
+        .nand_data      = &tosa_tc6393xb_nand_config,
+};
+
+
+static struct platform_device tc6393xb_device = {
+        .name   = "tc6393xb",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &tosa_tc6393xb_setup,
+        },
+        .num_resources  = ARRAY_SIZE(tc6393xb_resources),
+        .resource       = tc6393xb_resources,
+};
+
+static struct tosa_bt_data tosa_bt_data = {
+        .gpio_pwr       = TOSA_GPIO_BT_PWR_EN,
+        .gpio_reset     = TOSA_GPIO_BT_RESET,
+};
+
+static struct platform_device tosa_bt_device = {
+        .name   = "tosa-bt",
+        .id     = -1,
+        .dev.platform_data = &tosa_bt_data,
+};
+
+
 static struct platform_device *devices[] __initdata = {
         &tosascoop_device,
         &tosascoop_jc_device,
+        &tc6393xb_device,
+        &tosa_power_device,
         &tosakbd_device,
         &tosa_gpio_keys_device,
         &tosaled_device,
+        &tosa_bt_device,
 };
 
 static void tosa_poweroff(void)
 {
-        gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
-        gpio_set_value(TOSA_GPIO_ON_RESET, 1);
-
-        mdelay(1000);
-        arm_machine_restart('h');
+        arm_machine_restart('g');
 }
 
 static void tosa_restart(char mode)
@@ -485,10 +766,14 @@ static void tosa_restart(char mode)
 
 static void __init tosa_init(void)
 {
+        int dummy;
+
         pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
         gpio_set_wake(MFP_PIN_GPIO1, 1);
         /* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
+        init_gpio_reset(TOSA_GPIO_ON_RESET);
+
         pm_power_off = tosa_poweroff;
         arm_pm_restart = tosa_restart;
 
@@ -497,6 +782,10 @@ static void __init tosa_init(void)
         /* enable batt_fault */
         PMCR = 0x01;
 
+        dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
+        dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
+        dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+
         pxa_set_mci_info(&tosa_mci_platform_data);
         pxa_set_udc_info(&udc_info);
         pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 61e244023089..3ed757e6bcc8 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -31,7 +31,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,15 +40,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -122,7 +122,7 @@ static struct resource dm9000_resources[] = {
         [2] = {
                 .start  = TRIZEPS4_ETH_IRQ,
                 .end    = TRIZEPS4_ETH_IRQ,
-                .flags  = (IORESOURCE_IRQ | IRQT_RISING),
+                .flags  = (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
         },
 };
 
@@ -254,6 +254,7 @@ static void board_irda_mode(struct device *dev, int mode)
                 /* Fast mode */
                 trizeps_conxs_ircr |= ConXS_IRCR_MODE;
         }
+        pxa2xx_transceiver_mode(dev, mode);
         if (mode & IR_OFF) {
                 trizeps_conxs_ircr |= ConXS_IRCR_SD;
         } else {
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 66b446ca273d..0cb65b5772fe 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -19,16 +19,18 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/zylonite.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/zylonite.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -37,6 +39,8 @@
 struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
 
 int gpio_eth_irq;
+int gpio_debug_led1;
+int gpio_debug_led2;
 
 int wm9713_irq;
 
@@ -56,13 +60,57 @@ static struct resource smc91x_resources[] = {
         }
 };
 
+static struct smc91x_platdata zylonite_smc91x_info = {
+        .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+                  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
         .name           = "smc91x",
         .id             = 0,
         .num_resources  = ARRAY_SIZE(smc91x_resources),
         .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &zylonite_smc91x_info,
+        },
+};
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led zylonite_debug_leds[] = {
+        [0] = {
+                .name                   = "zylonite:yellow:1",
+                .default_trigger        = "heartbeat",
+        },
+        [1] = {
+                .name                   = "zylonite:yellow:2",
+                .default_trigger        = "default-on",
+        },
 };
 
+static struct gpio_led_platform_data zylonite_debug_leds_info = {
+        .leds           = zylonite_debug_leds,
+        .num_leds       = ARRAY_SIZE(zylonite_debug_leds),
+};
+
+static struct platform_device zylonite_device_leds = {
+        .name           = "leds-gpio",
+        .id             = -1,
+        .dev            = {
+                .platform_data = &zylonite_debug_leds_info,
+        }
+};
+
+static void __init zylonite_init_leds(void)
+{
+        zylonite_debug_leds[0].gpio = gpio_debug_led1;
+        zylonite_debug_leds[1].gpio = gpio_debug_led2;
+
+        platform_device_register(&zylonite_device_leds);
+}
+#else
+static inline void zylonite_init_leds(void) {}
+#endif
+
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct platform_pwm_backlight_data zylonite_backlight_data = {
         .pwm_id         = 3,
@@ -259,7 +307,7 @@ static void __init zylonite_init_mmc(void)
 static inline void zylonite_init_mmc(void) {}
 #endif
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int zylonite_matrix_key_map[] = {
         /* KEY(row, col, key_code) */
         KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
@@ -324,6 +372,57 @@ static void __init zylonite_init_keypad(void)
 static inline void zylonite_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition zylonite_nand_partitions[] = {
+        [0] = {
+                .name        = "Bootloader",
+                .offset      = 0,
+                .size        = 0x060000,
+                .mask_flags  = MTD_WRITEABLE, /* force read-only */
+        },
+        [1] = {
+                .name        = "Kernel",
+                .offset      = 0x060000,
+                .size        = 0x200000,
+                .mask_flags  = MTD_WRITEABLE, /* force read-only */
+        },
+        [2] = {
+                .name        = "Filesystem",
+                .offset      = 0x0260000,
+                .size        = 0x3000000,     /* 48M - rootfs */
+        },
+        [3] = {
+                .name        = "MassStorage",
+                .offset      = 0x3260000,
+                .size        = 0x3d40000,
+        },
+        [4] = {
+                .name        = "BBT",
+                .offset      = 0x6FA0000,
+                .size        = 0x80000,
+                .mask_flags  = MTD_WRITEABLE,  /* force read-only */
+        },
+        /* NOTE: we reserve some blocks at the end of the NAND flash for
+         * bad block management, and the max number of relocation blocks
+         * differs on different platforms. Please take care with it when
+         * defining the partition table.
+         */
+};
+
+static struct pxa3xx_nand_platform_data zylonite_nand_info = {
+        .enable_arbiter = 1,
+        .parts          = zylonite_nand_partitions,
+        .nr_parts       = ARRAY_SIZE(zylonite_nand_partitions),
+};
+
+static void __init zylonite_init_nand(void)
+{
+        pxa3xx_set_nand_info(&zylonite_nand_info);
+}
+#else
+static inline void zylonite_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init zylonite_init(void)
 {
         /* board-processor specific initialization */
@@ -342,6 +441,8 @@ static void __init zylonite_init(void)
         zylonite_init_lcd();
         zylonite_init_mmc();
         zylonite_init_keypad();
+        zylonite_init_nand();
+        zylonite_init_leds();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 6f7ae972b8db..095f5c648236 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -16,10 +16,13 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/zylonite.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/i2c.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
@@ -109,6 +112,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
         GPIO12_MMC2_DAT3,
         GPIO13_MMC2_CLK,
         GPIO14_MMC2_CMD,
+
+        /* Standard I2C */
+        GPIO21_I2C_SCL,
+        GPIO22_I2C_SDA,
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -192,6 +199,39 @@ static void __init zylonite_detect_lcd_panel(void)
                 pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
 }
 
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static struct pca953x_platform_data gpio_exp[] = {
+        [0] = {
+                .gpio_base      = 128,
+        },
+        [1] = {
+                .gpio_base      = 144,
+        },
+};
+
+struct i2c_board_info zylonite_i2c_board_info[] = {
+        {
+                .type           = "pca9539",
+                .addr           = 0x74,
+                .platform_data  = &gpio_exp[0],
+                .irq            = IRQ_GPIO(18),
+        }, {
+                .type           = "pca9539",
+                .addr           = 0x75,
+                .platform_data  = &gpio_exp[1],
+                .irq            = IRQ_GPIO(19),
+        },
+};
+
+static void __init zylonite_init_i2c(void)
+{
+        pxa_set_i2c_info(NULL);
+        i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
+}
+#else
+static inline void zylonite_init_i2c(void) {}
+#endif
+
 void __init zylonite_pxa300_init(void)
 {
         if (cpu_is_pxa300() || cpu_is_pxa310()) {
@@ -207,6 +247,8 @@ void __init zylonite_pxa300_init(void)
 
                 /* WM9713 IRQ */
                 wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+                zylonite_init_i2c();
         }
 
         if (cpu_is_pxa300()) {
@@ -222,4 +264,8 @@ void __init zylonite_pxa300_init(void)
                 zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
                 zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
         }
+
+        /* GPIOs for Debug LEDs */
+        gpio_debug_led1 = EXT_GPIO(25);
+        gpio_debug_led2 = EXT_GPIO(26);
 }
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 2b4fc34919ac..9879d7da2df5 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -17,9 +17,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mfp-pxa320.h>
-#include <asm/arch/zylonite.h>
+#include <mach/gpio.h>
+#include <mach/mfp-pxa320.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
@@ -116,6 +116,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
         GPIO27_MMC2_DAT3,
         GPIO28_MMC2_CLK,
         GPIO29_MMC2_CMD,
+
+        /* Debug LEDs */
+        GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
+        GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
 };
 
 #define NUM_LCD_DETECT_PINS     7
@@ -189,6 +193,8 @@ void __init zylonite_pxa320_init(void)
 
                 /* GPIO pin assignment */
                 gpio_eth_irq    = mfp_to_gpio(MFP_PIN_GPIO9);
+                gpio_debug_led1 = mfp_to_gpio(MFP_PIN_GPIO1_2);
+                gpio_debug_led2 = mfp_to_gpio(MFP_PIN_GPIO4_2);
 
                 /* MMC card detect & write protect for controller 0 */
                 zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);